Diversity of Microbial Communities

Decrease in Soil Functionalities and Herbs' Diversity, but Not That of Arbuscular Mycorrhizal Fungi, Linked to Short Fire Interval in Semi-Arid Oak Forest Ecosystem, West Iran

The semi-arid forest ecosystems of western Iran dominated by Quercus brantii are often disturbed by wildfires. Here, we assessed the effects of short fire intervals on the soil properties and community diversity of herbaceous plants and arbuscular mycorrhizal fungi (AMF), as well as the interactions between these ecosystem features. Plots burned once or twice within 10 years were compared to unburned plots over a long time period (control sites). Soil physical properties were not affected by the short fire interval, except bulk density, which increased. Soil geochemical and biological properties were affected by the fires. Soil organic matter and nitrogen concentrations were depleted by two fires. Short intervals impaired microbial respiration, microbial biomass carbon, substrate-induced respiration, and urease enzyme activity. The successive fires affected the AMF's Shannon diversity. The diversity of the herb community increased after one fire and dropped after two, indicating that the whole community structure was altered. Two fires had greater direct than indirect effects on plant and fungal diversity, as well as soil properties. Short-interval fires depleted soil functional properties and reduced herb diversity. With short-interval fires probably fostered by anthropogenic climate change, the functionalities of this semi-arid oak forest could collapse, necessitating fire mitigation.

Exploring soil bacterial diversity in different micro-vegetational habitats of Dachigam National Park in North-western Himalaya

Dachigam National Park (DNP), in Zabarwan mountains of north-western Himalaya constitutes a region of high biodiversity with greater endemism. DNP is known for its unique micro-climate together with distinct vegetational zones providing home to variety of threatened and endemic plant, animal, and bird species. However, studies on soil microbial diversity in fragile ecosystems of north-western Himalaya in general and DNP in particular are lacking. This was thus a maiden attempt to study variations in soil bacterial diversity of DNP with respect to changing soil physico-chemical properties, vegetation, and altitude. Soil parameters depicted significant variations among different sites with highest values for temperature, OC, OM and TN being 22.2 ± 0.75 °C, 6.53 ± 0.32%, 11.25 ± 0.54%, 0.545 ± 0.04% from site-2 (low altitudinal grassland site) in summer and lowest of 5.1 ± 0.65 °C, 1.24 ± 0.26%, 2.14 ± 0.45% and 0.132 ± 0.04% at site-9 (high altitudinal mixed pine site) in winter. Bacterial CFU showed significant correlations with soil physico-chemical attributes. This study led to the isolation and identification of 92 morphologically varied bacteria with the highest (15) from site-2 and lowest (04) from site-9 which post BLAST analysis (via 16S rRNA analysis) depicted presence of only 57 distinct bacterial species under taxonomic phylum, Firmicutes and Proteobacteria. Nine species were widely spread (i.e., isolated from > 3 sites), however, most bacteria (37) were restricted to a particular site. Diversity indices ranged between 1.380 to 2.631 (Shannon-Weiner's index); 0.747 to 0.923 (Simpson's index) with highest values for site-2 and lowest for site-9. Index of similarity was highest (47.1%) between riverine sites (site-3 and site-4) whereas two mixed pine sites (site-9 and site-10) showed no similarity.

The effects of vehicular emissions on the activity and diversity of the roadside soil microbial community

Motor vehicles emit a variety of pollutants including metals, petroleum hydrocarbons and polycyclic aromatic hydrocarbons (PAHs). The relationships between metals, petroleum hydrocarbons and PAHs, soil respiration and microbial diversity (fungi and bacteria) were studied using control (n = 3) and roadside soils (n = 27) with different exposure periods to vehicle emissions (2-63 years). Bacterial diversity was found to be higher than control sites (P = 0.002) but was the same across different categories of road age (P = 0.328). Significant (r = -0.49, P = 0.007) contrasting behaviour of fungal and bacterial diversity was reported, with diversity increasing across all road types for bacteria and decreasing across all road types for fungi compared to control soils. Analysis of the bacterial community identified three distinct clusters, separated on age of contamination, suggesting that roadside bacterial communities change over time with pollution from vehicles with the potential development of metal resistant bacteria in roadside soils. In contrast, for fungal communities, a reduction in diversity with time of exposure to roadside vehicle emissions was observed suggesting the potential for reduced ecosystem functionality and soil health in roadside soils. This is the first study in the published literature to include both bacterial and fungal responses from aged roadside soils. The results from this study suggest that normal functionality of soil ecosystem services is being affected in roadside soils, potentially globally.

Key factors controlling microbial community responses after a fire: Importance of severity and recurrence

Wildfires are a major problem in Mediterranean forest ecosystems, affecting the same area year after year. Their severity is increasing, partly due to climate change and hence, every now and then, virulent fires of high severity spread ravage this region. The aim of this study was to evaluate the influence of fire regime (recurrence, severity) in soil microbial community structure analyzing the phospholipid fatty acid (PLFA) and the microbial functional diversity assessing the level physiological profiling technique (CLPP). Samples of a soil affected by a high severities wildfire and a soil affected by a low severity experimental fire were heated under laboratory conditions at different temperatures to simulate different fire severity. To simulate fire recurrence, the heating treatment was repeated after one month of incubation. The fire severity was estimated as the amount of heat supplied to samples by degree-hour methodology. A marked impact of fire regime on soil microorganisms was detected; the microbial community response varied depending on previous history of fire and the magnitude of changes in PLFA pattern and CLPP, was related to the amount of heat supplied to the samples. Wildfires had a greater impact on microbial community structure than subsequent soil heating in the laboratory. The total biomass and the biomass of specific groups of microorganisms decreased notably as a consequence of wildfire and minor changes were detected due to the experimental fire and soil heating under laboratory conditions. The results clearly showed the usefulness of PLFA pattern to study the effect of fire regimes and associated direct and indirect changes in soil microorganisms and in soil quality. The data also indicated that the degree-hour methodology rather than maximum temperature is adequate to simulate fire severity and evaluate the impact of thermal shock on soil ecosystems.

Diazinon dissipation in pesticide-contaminated paddy soil: kinetic modeling and isolation of a degrading mixed bacterial culture

Dissipation kinetics of diazinon was investigated in soils culled from a paddy field with a long history of the pesticide application. Goodness of fit statistical indices derived from several fitted mono- and bi-exponential kinetic models revealed a bi-phasic pattern of the diazinon dissipation curve at 15 and 150 mg kg^-1 spiking levels, which could be described best by the first-order double exponential decay (FODED) model. Parameters obtained from this model were able to describe the enhanced dissipation of diazinon as the result of repeated soil applications, where a larger fraction of the pesticide readily available in the solution phase was dissipated with a fast rate. Cluster and principal component analysis (PCA) of denaturing gradient gel electrophoresis (DGGE) obtained from soil bacterial populations revealed that they were only affected at the 150 mg kg^-1 diazinon concentration. This was also supported by the phylogenetic tree obtained from sequences of the main gel bands. Accordingly, bacterial populations belonging to Proteobacteria were enriched in the soil following three treatments with diazinon at 150 mg kg^-1. The Shannon's index revealed a nonsignificant increase (P ≤ 0.05) in overall diversity of soil bacteria following diazinon application. Diazinon-degrading bacteria were isolated from the paddy soils in a mineral salt medium. Results showed that the isolated mixed culture was able to remove 90% of the pesticide at two concentrations of 50 and 100 mg L^-1 by 16.81 and 19.60 days, respectively. Sequencing the DGGE bands confirmed the role of Betaproteobacteria as the main components of the isolated mixed culture in the degradation of diazinon.

Effects of simulated acid rain on soil fauna community composition and their ecological niches

Acid rain is one of the severest environmental issues globally. Relative to other global changes (e.g., warming, elevated atmospheric [CO₂], and nitrogen deposition), however, acid rain has received less attention than its due. Soil fauna play important roles in multiple ecological processes, but how soil fauna community responds to acid rain remains less studied. This microcosm experiment was conducted using latosol with simulated acid rain (SAR) manipulations to observe potential changes in soil fauna community under acid rain stress. Four pH levels, i.e., pH 2.5, 3.5, 4.5, and 5.5, and a neutral control of pH 7.0 were set according to the current pH condition and acidification trend of precipitation in southern China. As expected, we observed that the SAR treatments induced changes in soil fauna community composition and their ecological niches in the tested soil; the treatment effects tended to increase as acidity increased. This could be attributable to the environmental stresses (such as acidity, porosity and oxygen supply) induced by the SAR treatments. In addition to direct acidity effect, we propose that potential changes in permeability and movability of water and oxygen in soils induced by acid rain could also give rise to the observed shifts in soil fauna community composition. These are most likely indirect pathways of acid rain to affect belowground community. Moreover, we found that nematodes, the dominating soil fauna group in this study, moved downwards to mitigate the stress of acid rain. This is probably detrimental to soil fauna in the long term, due to the relatively severer soil conditions in the deep than surface soil layer. Our results suggest that acid rain could change soil fauna community and the vertical distribution of soil fauna groups, consequently changing the underground ecosystem functions such as organic matter decomposition and greenhouse gas emissions.

Efficiency of repeated phytoextraction of cadmium and zinc from an agricultural soil contaminated with sewage sludge

Long-term application of sewage sludge resulted in soil cadmium (Cd) and zinc (Zn) contamination in a pot experiment conducted to phytoextract Cd/Zn repeatedly using Sedum plumbizincicola and Apium graceolens in monoculture or intercropping mode eight times. Shoot yields and soil physicochemical properties changed markedly with increasing number of remediation crops when the two plant species were intercropped compared with the unplanted control soil and the two monoculture treatments. Changes in soil microbial indices such as average well colour development, soil enzyme activity and soil microbial counts were also significantly affected by the growth of the remediation plants, especially intercropping with S. plumbizincicola and A. graveolens. The higher yields and amounts of Cd taken up indicated that intercropping of the hyperaccumulator and the vegetable species may be suitable for simultaneous agricultural production and soil remediation, with larger crop yields and higher phytoremediation efficiencies than under monoculture conditions.

Response of microbial community to a new fungicide fluopyram in the silty-loam agricultural soil

The impacts of fluopyram on a soil microbial community were studied at three application rates: at the recommended field rate (T1, 0.5mg/kg soil), three-fold recommended field rate (T3, 1.5mg/kg soil) and ten-fold recommended field rate (T10, 5mg/kg soil). Soil samples were taken after 7, 15, 30, 45, 60 and 90 days of application to determine the fluopyram residue and microbial properties (i.e., basal respiration, substrate-induced respiration, microbial biomass carbon, microbial community function and structure). The half-lives of the fluopyram at levels of 0.5, 1.5 and 5mg/kg in soil were calculated to be 64.2, 81.5 and 93.6 days, respectively. The results demonstrated that fluopyram treatment (T1, T3 and T10) decreased microbial biomass C but increased the basal respiration, substrate-induced respiration, and ecophysiological indices (qCO2). Average well color development (AWCD) represents the oxidative capacity of soil microorganisms cultivated in the BIOLOG micro-plates and usually indicates the overall microbial metabolic capacity. The BIOLOG results revealed that the AWCD in the soil treated with 1.5 and 5mg/kg fluopyram (T3 and T10) was significantly lower than that of the control during the incubation period. A similar variation in the diversity indices (Simpson index and McIntosh index) was observed. Phospholipid fatty acid (PLFA) analysis revealed that the addition of fluopyram decreased the total amount of PLFAs, bacterial biomass (both Gram-positive (GP) bacteria and Gram-negative (GN)), fungal biomass, the ratios of the GN/GP and fungi/bacteria at all incubation times. Principal component analyses (PCA) suggested that the addition of fluopyram shifted the soil microbial community structure and function. Hence, fluopyram has a harmful effect on overall soil microbial activity, and changed soil microbial community structure and function.

Effect of tetraconazole application on the soil microbial community

Tetraconazole is one of the most commonly used triazole fungicides in agricultural practice, and its continuous application poses a potential risk for non-target soil microorganisms. Therefore, the objective of this study was to evaluate the effect of tetraconazole at the field rate (T1, 0.33 mgkg(-1) of soil), three times the field rate (T3, 1.00 mgkg(-1) of soil) and 10 times the field rate (T10, 3.33 mgkg(-1) of soil) on the soil microorganisms. To ascertain this effect, the tetraconazole concentration and the microbial properties with potential as bioindicators of soil health (i.e. microbial biomass C, basal respiration, substrate-induced respiration, structure diversity and functional community profiling) were determined. The results showed that the degradation half-lives of tetraconazole varied from 69 to 87 days, depending on the three application concentrations. The microbial biomass C, basal respiration and substrate-induced respiration were inhibited, but they tended to recover at the end of the incubation when tetraconazole was applied at the recommended field rate. The ratios of the gram-negative to gram-positive (GN to GP) bacteria decreased, and the fungi to bacteria ratio increased after a temporal decrease on the seventh day. A principal component analysis of the PLFAs showed that tetraconazole application significantly shifted the microbial community structure on day 7. Different functional community profiles were observed, depending on the tetraconazole application rates. It was concluded that tetraconazole application decreases the soil microbial biomass and activity and changes the structures of the soil microbial community.

Bacterial community structure analysis of sediment in the Sagami River, Japan using a rapid approach based on two-dimensional DNA gel electrophoresis mapping with selective primer pairs

A rapid approach based on two-dimensional DNA gel electrophroesis (2-DGE) mapping with selective primer pairs was employed to analyze bacterial community structure in sediments from upstream, midstream and downstream of Sagami River in Japan. The 2-DGE maps indicated that Alpha- and Delta-proteobacteria were major bacterial populations in the upstream and midstream sediments. Further bacterial community structure analysis showed that richness proportion of Alpha- and Delta-proteobacterial groups reflected a trend toward decreasing from the upstream to downstream sediments. The biomass proportion of bacterial populations in the midstream sediment showed a significantly difference from that in the other sediments, suggesting that there may be an environmental pressure on the midstream bacterial community. Lorenz curves, together with Gini coefficients were successfully applied to the 2-DGE mapping data for resolving evenness of bacterial populations, and showed that the plotted curve from high-resolution 2-DGE mapping became less linear and more an exponential function than that of the 1-DGE methods such as chain length analysis and denaturing gradient gel electrophoresis, suggesting that the 2-DGE mapping may achieve a more detailed evaluation of bacterial community. In conclusion, the 2-DGE mapping combined with the selective primer pairs enables bacterial community structure analysis in river sediment and thus it can also monitor sediment pollution based on the change of bacterial community structure.

Mixtures of environmental pollutants: effects on microorganisms and their activities in soils

Soil is the ultimate sink for most contaminants and rarely has only a single contaminant. More than is generally acknowledge, environmental pollutants exist as mixtures (organic-organic, inorganic-inorganic, and organic-inorganic). It is much more difficult to study chemical mixtures than individual chemicals, especially in the complex soil environment. Similarly, understanding the toxicity of a chemical mixture on different microbial species is much more complex, time consuming and expensive, because multiple testing designs are needed for an increased array of variables. Therefore, until now, scientific enquiries worldwide have extensively addressed the effects of only individual pollutants toward nontarget microorganisms. In this review, we emphasize the present status of research on (i) the environmental occurrence of pollutant mixtures; (ii) the interactions between pollutant mixtures and ecologically beneficial microorganisms; and (iii) the impact of such interactions on environmental quality. We also address the limitations of traditional cultivation based methods for monitoring the effects of pollutant mixtures on microorganisms. Long-term monitoring of the effects of pollutant mixtures on microorganisms, particularly in soil and aquatic ecosystems, has received little attention. Microbial communities that can degrade or can degrade or can develop tolerance to, or are inhibited by chemical mixtures greatly contribute to resilience and resistance in soil environments. We also stress in this review the important emerging trend associated with the employment of molecular methods for establishing the effects of pollutant mixtures on microbial communities. There is currently a lack of sufficient cogent toxicological data on chemical mixtures for making informed decision making in risk assessment by regulators. Therefore, not only more toxicology information on mixtures is needed but also there is an urgent need to generate sufficient, suitable, and long-term modeling data that have higher predictability when assessing pollutant mixture effects on microorganisms. Such data would improve risk assessment at contaminated sites and would help devise more effective bioremediation strategies.

High incidence of plant growth-stimulating bacteria associated with the rhizosphere of wheat grown on salinated soil in Uzbekistan

Soil salinization is increasing steadily in many parts of the world and causes major problems for plant productivity. Under these stress conditions, root-associated beneficial bacteria can help improve plant growth and nutrition. In this study, salt-tolerant bacteria from the rhizosphere of Uzbek wheat with potentially beneficial traits were isolated and characterized. Eight strains which initially positively affect the growth of wheat plants in vitro were investigated in detail. All eight strains are salt tolerant and have some of the following plant growth-beneficial properties: production of auxin, HCN, lipase or protease and wheat growth promotion. Using sequencing of part of the 16S rDNA, the eight new isolates were identified as Acinetobacter (two strains), Pseudomonas aeruginosa, Staphylococcus saprophyticus, Bacillus cereus, Enterobacter hormaechei, Pantoae agglomerans and Alcaligenes faecalis. All these strains are potential human pathogens. Possible reasons for why these bacteria present in the rhizosphere and establish there are discussed.

Purification of total DNA extracted from activated sludge

Purification of the total DNA extracted from activated sludge samples was studied. The effects of extraction buffers and lysis treatments (lysozyme, sodium dodecyl sulfate (SDS), sonication, mechanical mill and thermal shock) on yield and purity of the total DNA extracted from activated sludge were investigated. It was found that SDS and mechanical mill were the most effective ways for cell lysis, and both gave the highest DNA yields, while by SDS and thermal shock, the purest DNA extract could be obtained. The combination of SDS with other lysis treatment, such as sonication and thermal shock, could apparently increase the DNA yields but also result in severe shearing. For the purification of the crude DNA extract, polyvinyl polypyrrolidone was used for the removal of humic contaminants. Cetyltrimethyl ammonium bromide, potassium acetate and phenol/chloroform were used to remove proteins and polysaccharides from crude DNA. Crude DNA was further purified by isopropanol precipitation. Thus, a suitable protocol was proposed for DNA extraction, yielding about 49.9 mg (total DNA)/g volatile suspended solids, and the DNA extracts were successfully used in PCR amplifications for 16S rDNA and 16S rDNA V3 region. The PCR products of 16S rDNA V3 region allowed the DGGE analysis (denatured gradient gel electrophoresis) to be possible.

Characterization of depth-related microbial communities in lake sediment by denaturing gradient gel electrophoresis of amplified 16S rRNA fragments

The characterization of microbial communities of different depth sediment samples was examined by a culture-independent method and compared with physicochemical parameters, those are organic matter (OM), total nitrogen (TN), total phosphorus (TP), pH and redox potential (Eh). Total genomic DNA was extracted from samples derived from different depths. After they were amplified with the GC-341f/907r primer sets of partial bacterial 16S rRNA genes, the products were separated by denaturing gradient gel electrophoresis (DGGE). The profile of DGGE fingerprints of different depth sediment samples revealed that the community structure remained relatively stable along the entire 45 cm sediment core, however, principal-component analysis of DGGE patterns revealed that at greater sediment depths, successional shifts in community structure were evident. The principle coordinates analysis suggested that the bacterial communities along the sediment core could be separated into two groups, which were located 0--20 cm and 21--45 cm, respectively. The sequencing dominant bands demonstrated that the major phylogenetic groups identified by DGGE belonged to Bacillus, Bacterium, Brevibacillus, Exiguobacterium, gamma-Proteobacterium, Acinetobacter sp. and some uncultured or unidentified bacteria. The results indicated the existence of highly diverse bacterial community in the lake sediment core.

Antimicrobial defences increase with sociality in bees

Evidence for the antiquity and importance of microbial pathogens as selective agents is found in the proliferation of antimicrobial defences throughout the animal kingdom. Social insects, typified by crowding and often by low genetic variation, have high probabilities of disease transmission and eusocial Hymenoptera may be particularly vulnerable because of haplodiploidy. Mechanisms they employ to reduce the risk of disease include antimicrobial secretions which are particularly important primary barriers to infection. However, until now, whether or not there is selection for stronger antimicrobial secretions when the risk of disease increases because of sociality has not been tested. Here, we present evidence that the production of progressively stronger antimicrobial compounds was critical to the evolution of sociality in bees. We found that increases in group size and genetic relatedness were strongly correlated with increasing antimicrobial strength. The antimicrobials of even the most primitive semi-social species were an order of magnitude stronger that those of solitary species, suggesting a point of no return, beyond which disease control was essential. Our results suggest that selection by microbial pathogens was critical to the evolution of sociality and required the production of strong, front-line antimicrobial defences.

Bacterial diversity associated with Blood Falls, a subglacial outflow from the Taylor Glacier, Antarctica

Blood Falls is the surface manifestation of brine released from below the Taylor Glacier, McMurdo Dry Valleys, Antarctica. Geochemical analyses of Blood Falls show that this brine is of a marine origin. The discovery that 74% of clones and isolates from Blood Falls share high 16S rRNA gene sequence homology with phylotypes from marine systems supports this contention. The bacterial 16S rRNA gene clone library was dominated by a phylotype that had 99% sequence identity with Thiomicrospira arctica (46% of the library), a psychrophilic marine autotrophic sulfur oxidizer. The remainder of the library contained phylotypes related to the classes Betaproteobacteria, Deltaproteobacteria, and Gammaproteobacteria and the division Bacteroidetes and included clones whose closest cultured relatives metabolize iron and sulfur compounds. These findings are consistent with the high iron and sulfate concentrations detected in Blood Falls, which are likely due to the interactions of the subglacial brine with the underlying iron-rich bedrock. Our results, together with previous reports, suggest that the brine below the Taylor Glacier hosts a viable ecosystem with microorganisms capable of growth, supported by chemical energy present in reduced iron and sulfur compounds. The metabolic and phylogenetic structure of this subglacial microbial assemblage appears to be controlled by glacier hydrology, bedrock lithology, and the preglacial ecosystem.

Biodegradation processes in a laboratory-scale groundwater contaminant plume assessed by fluorescence imaging and microbial analysis

Flow reactors containing quartz sand colonized with biofilm were set up as physical model aquifers to allow degrading plumes of acetate or phenol to be formed from a point source. A noninvasive fluorescent tracer technique was combined with chemical and biological sampling in order to quantify transport and biodegradation processes. Chemical analysis of samples showed a substantial decrease in carbon concentration between the injection and outflow resulting primarily from dilution but also from biodegradation. Two-dimensional imaging of the aqueous oxygen [O2(aq)] concentration field quantified the depletion of O2(aq) within the contaminant plume and provided evidence for microbial respiration associated with biodegradation of the carbon source. Combined microbiological, chemical, and O2(aq) imaging data indicated that biodegradation was greatest at the plume fringe. DNA profiles of bacterial communities were assessed by temperature gradient gel electrophoresis, which revealed that diversity was limited and that community changes observed depended on the carbon source used. Spatial variation in activity within the plume could be quantitatively accounted for by the changes observed in active cell numbers rather than differences in community structure, the total biomass present, or the increased enzyme activity of individual cells. Numerical simulations and comparisons with the experimental data were used to test conceptual models of plume processes. Results demonstrated that plume behavior was best described by growth and decay of active biomass as a single functional group of organisms represented by active cell counts.

Application of 16S rRNA gene-targetted fluorescence in situ hybridization and restriction fragment length polymorphism to study porcine microbiota along the gastrointestinal tract in response to different sources of dietary fibre

A total of 32 pigs of 15+/-0.38 kg body weight were fed for 6 weeks one of four diets differing in their source of dietary fibre. FISH was used to quantify the main bacterial groups in the pig gut using the following probes: Eub338, Bac303, Rfla729, Rbro730, Erec482, Fprau645, Prop853, Str493 and Lab158. FISH counts revealed important differences at four sites along the pig gastrointestinal tract, but we were unable to show differences related to diets. Stomach and jejunal samples gave total bacterial counts of 0.1-5.3 x 10(8) g(-1) of contents. In the stomach, streptococci and lactobacilli were predominant, and the clostridial cluster IX group was abundant (14-41% of total bacterial count). Clostridial cluster IX bacteria were present elsewhere in the gastrointestinal tract at 1-8%. The other groups were generally more abundant in the proximal colon and rectum: Bacteroides/Prevotella (5-10%), clostridial cluster XIVa (10-19%), and cluster IV relatives of Faecalibacterium prausnitzii (1-4%) and ruminococcus (4-10%). Restriction fragment length polymorphism profiles showed changes related to diet, with pigs fed wheat bran having the lowest richness of all diets (P=0.008).

Biofouling and biocorrosion in industrial water systems

Corrosion associated with microorganisms has been recognized for over 50 years and yet the study of microbiologically influenced corrosion (MIC) is relatively new. MIC can occur in diverse environments and is not limited to aqueous corrosion under submerged conditions, but also takes place in humid atmospheres. Biofouling of industrial water systems is the phenomenon whereby surfaces in contact with water are colonized by microorganisms, which are ubiquitous in our environment. However, the economic implications of biofouling in industrial water systems are much greater than many people realize. In a survey conducted by the National Association of Corrosion Engineers of the United States ten years ago, it was found that many corrosion engineer did not accept the role of bacteria in corrosion, and many of then that did, could not recognize and mitigate the problem. Biofouling can be described in terms of its effects on processes and products such as material degradation (bio-corossion), product contamination, mechanical blockages, and impedance of heat transfer. Microorganisms distinguish themselves from other industrial water contaminants by their ability to utilize available nutrient sources, reproduce, and generate intra- and extracellular organic and inorganic substances in water. A sound understanding of the molecular and physiological activities of the microorganisms involved is necessary before strategies for the long term control of biofouling can be format. Traditional water treatment strategies however, have largely failed to address those factors that promote biofouling activities and lead to biocorrosion. Some of the major developments in recent years have been a redefinition of biofilm architecture and the realization that MIC of metals can be best understood as biomineralization.

Quantitative analysis of bacterial communities from Mediterranean sapropels based on cultivation-dependent methods

Microbial communities of ancient Mediterranean sapropels, buried sediment layers of high organic matter, were analyzed by most probable number (MPN) approaches. Mineral media containing different carbon sources in sub-millimolar concentrations were used. MPN numbers were elevated in sapropels and at the sediment surface, which mirrored total cell count distributions. Highest MPN counts were obtained with a mixture of different monomeric and polymeric substrates, with amino acids or with long-chain fatty acids as sole carbon sources. These values reached up to 2 x 10(7) cm(-3), representing 3.3% of the total cell count. A total of 98 pure cultures were isolated from the highest positive dilutions of the MPN series, representing the most abundant microorganisms culturable by the methods used. The strains were identified by molecular biological methods and could be grouped into 19 different phylotypes. They belonged to the alpha-, beta-, gamma-, and delta-Proteobacteria, to the Actinobacteria and the Firmicutes. However, about half of the number of isolates was closely related to the genera Photobacterium and Agrobacterium. Regarding the high cultivation success, these organisms can be assumed to be typical sapropel bacteria, representing a substantial part of the culturable indigenous microbial community.

Microbial communities associated with electrodes harvesting electricity from a variety of aquatic sediments

The microbial communities associated with electrodes from underwater fuel cells harvesting electricity from five different aquatic sediments were investigated. Three fuel cells were constructed with marine, salt-marsh, or freshwater sediments incubated in the laboratory. Fuel cells were also deployed in the field in salt marsh sediments in New Jersey and estuarine sediments in Oregon, USA. All of the sediments produced comparable amounts of power. Analysis of 16S rRNA gene sequences after 3-7 months of incubation demonstrated that all of the energy-harvesting anodes were highly enriched in microorganisms in the delta-Proteobacteria when compared with control electrodes not connected to a cathode. Geobacteraceae accounted for the majority of delta-Proteobacterial sequences or all of the energy-harvesting anodes, except the one deployed at the Oregon estuarine site. Quantitative PCR analysis of 16S rRNA genes and culturing studies indicated that Geobacteraceae were 100-fold more abundant on the marine-deployed anodes versus controls. Sequences most similar to microorganisms in the family Desulfobulbaceae predominated on the anode deployed in the estuarine sediments, and a significant proportion of the sequences recovered from the freshwater anodes were closely related to the Fe(III)-reducing isolate, Geothrix fermentans. There was also a specific enrichment of microorganisms on energy harvesting cathodes, but the enriched populations varied with the sediment/water source. Thus, future studies designed to help optimize the harvesting of electricity from aquatic sediments or waste organic matter should focus on the electrode interactions of these microorganisms which are most competitive in colonizing anodes and cathodes.

Development of Post-weaning Diarrhoea in Piglets. Relation to Presence of Escherichia coli Strains and Rotavirus

Weaning of piglets complicated with an exposure to pathogenic strains of Escherichia coli was scrutinized in two sets. The first set comprised 20 animals representing two litters and the second set included 30 animals from five litters. The piglets were either left as controls or exposed to one or three pathogenic strains of E. coli. Aiming to simulate a natural exposure the challenge strains were spread on the floor of the pens at weaning. In addition the pigs experienced several non-infectious stress factors commonly occurring at that occasion. Some groups were given adrenocorticotropic hormone (ACTH), aiming to simulate a stressful weaning. The balance and the composition of the faecal coliform populations, measured by a metabolic fingerprinting method, was disturbed among all animals following weaning. This disturbance was more pronounced and lasted longer among piglets exposed to pathogenic strains of E. coli. All piglets exposed to pathogenic E. coli shed these strains in faeces. Diarrhoea was induced in the groups exposed to E. coli, but not among the control animals. Pigs not treated with ACTH and subjected to a single pathogenic strain of E. coli became infected but did not develop diarrhoea unless if coinciding with shed of rotavirus. Control pigs excreting rotavirus had no diarrhoea. Diarrhoea was most frequent in the groups exposed to three pathogenic strains of E. coli, and in these groups diarrhoea was seen in the absence of rotavirus. ACTH administration amplified the clinical signs. The litter of origin influenced the development of post-weaning diarrhoea.

Selective growth of mucolytic bacteria including Clostridium perfringens in a neonatal piglet model of total parenteral nutrition

BACKGROUND

Compromised barrier function and intestinal inflammation are common complications of total parenteral nutrition (TPN).

OBJECTIVE

We tested the hypothesis that the lack of enteral nutrients in TPN might select commensal or pathogenic bacteria that use mucus as a substrate, thereby weakening the protection provided by the intestinal mucus layer.

DESIGN

Ileal microbiota profiles of piglets fed by total enteral nutrition (TEN; n = 6) or TPN (n = 5) were compared with the use of 16S ribosomal DNA polymerase chain reaction (PCR)-denaturing gradient gel electrophoresis and with a PCR-based method developed to specifically measure Clostridium perfringens concentrations. Ileal bacteria from TEN and TPN piglets were also examined for their ability to grow on mucin or sulfated monosaccharides.

RESULTS

Bacterial community structure was equally complex in the ileum of TEN and TPN piglets, but profiles clustered according to mode of nutrition. Sixty-two percent of total mucus-associated bacteria (100 colonies tested) in TPN compared with 33% of mucus-associated bacteria (100 colonies tested) in TEN ileal samples grew on mucin. Bacteria capable of using sulfated monosaccharides were also enriched in TPN samples. C. perfringens, an opportunistic pathogen, was specifically enriched in the TPN ileum (P < 0.05). These results were corroborated by cultivation-based studies that showed rapid growth of C. perfringens on mucin-based substrates.

CONCLUSIONS

Mucolytic potential is widespread among intestinal bacteria. Mucolytic bacteria in general and C. perfringens in particular were selected when enteral nutrients were withheld in this TPN piglet model. Similar enrichment processes may occur in humans nourished by TPN and may thereby contribute to intestinal dysfunction.

Prokaryotic diversity--magnitude, dynamics, and controlling factors

There are probably millions of species in the microorganismal domains Bacteria and Archaea (the prokaryotes), and we are only just beginning to work out the basic principles governing their distribution and abundance in natural environments. One characteristic that has become clear is that prokaryote diversity in aquatic environments is orders of magnitude less than in sediments and soils. Hypotheses and models explaining such differences are under development and are beginning to offer promising insights into the mechanisms governing prokaryote diversity and ecosystem function.

Phospholipid analysis as a tool to study complex microbial communities in marine sediments

To complement information on microbial communities in marine sediments that can be obtained using microbiological methods, we developed an analytical procedure to trace microbial lipids in environmental samples. We focused on analyzing intact phospholipids as these membrane constituents are known to be biomarkers for viable cells. Analysis of intact phospholipids from a fractionated and preconcentrated sediment extract was achieved using liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS). The combined analysis of phospholipid types and their fatty acid substituents allowed a differentiation between various groups of microorganisms living in the sediment. For comparison three strains of marine sulfate-reducing bacteria (SRB) were analysed for their lipid content.

Polyphasic microbial community analysis of petroleum hydrocarbon-contaminated soils from two northern Canadian communities

The cold-adapted bacterial communities in petroleum hydrocarbon-contaminated and non-impacted soils from two northern Canadian environments, Kuujjuaq, Que., and Alert, Nunavut, were analyzed using a polyphasic approach. Denaturing gradient gel electrophoresis (DGGE) separation of 16S rDNA PCR fragments from soil total community DNA revealed a high level of bacterial diversity, as estimated by the total number of bands visualized. Dendrogram analysis clustered the sample sites on the basis of geographical location. Comparison of the overall microbial molecular diversity suggested that in the Kuujjuaq sites, contamination negatively impacted diversity whereas in the Alert samples, diversity was maintained or increased as compared to uncontaminated controls. Extraction and sequencing analysis of selected 16S rDNA bands demonstrated a range of similarity of 86-100% to reference organisms, with 63.6% of the bands representing high G+C Gram-positive organisms in the order Actinomycetales and 36.4% in the class Proteobacteria. Community level physiological profiles generated using Biolog GN plates were analyzed by cluster analysis. Based on substrate oxidation rates, the samples clustered into groups similar to those of the DGGE dendrograms, i.e. separation based upon geographic origin. The coinciding results reached using culture-independent and -dependent analyses reinforces the conclusion that geographical origin of the samples, rather than petroleum contamination level, was more important in determining species diversity within these cold-adapted bacterial communities.

Monitoring impact of in situ biostimulation treatment on groundwater bacterial community by DGGE

Changes in bacterial diversity during the field experiment on biostimulation were monitored by denaturing gradient gel electrophoresis (DGGE) analysis of PCR-amplified 16S rDNA fragments. The results revealed that the bacterial community was disturbed after the start of treatment, continued to change for 45 days or 60 days and then formed a relatively stable community different from the original community structure. DGGE analysis of soluble methane monooxygenase (sMMO) hydroxylase gene fragments, mmoX, was performed to monitor the shifts in the numerically dominant sMMO-containing methanotrophs during the field experiment. Sequence analysis on the mmoX gene fragments from the DGGE bands implied that the biostimulation treatment caused a shift of potential dominant sMMO-containing methanotrophs from type I methanotrophs to type II methanotrophs.

Levels of bacterial community diversity in four arid soils compared by cultivation and 16S rRNA gene cloning

Techniques based on amplification of 16S rRNA genes for comparing bacterial communities are now widely used in microbial ecology, but calibration of these techniques with traditional tools, such as cultivation, has been conspicuously absent. In this study, we compared levels of bacterial community diversity in two pinyon rhizosphere soil samples and two between-tree (interspace) soil samples by analyzing 179 cultivated bacterial isolates and 801 16S rRNA genes amplified from extracted soil DNA. Phylotypes were defined by performing a restriction fragment length polymorphism analysis of 16S rRNA gene sequences with the enzymes RsaI and BstUI. The average level of 16S rRNA gene sequence similarity of members of a phylotype was 86.6% based on an analysis of partial sequences. A total of 498 phylotypes were identified among the 16S ribosomal DNA (rDNA) clones, while 34 phylotypes occurred among the cultivated isolates. Analysis of sequences from a subset of the phylotypes showed that at least seven bacterial divisions were represented in the clone libraries, whereas the isolates represented only three. The phylotype richness, frequency distribution (evenness), and composition of the four culture collections and the four clone libraries were investigated by using a variety of diversity indices. Although cultivation and 16S rRNA cloning analyses gave contradictory descriptions of the relative phylotype richness for one of the four environments, the two methods identified qualitatively consistent relationships when levels of evenness were compared. The levels of phylotype similarity between communities were uniformly low (15 to 31%). Both methods consistently indicated that one environment was distinct from the other three. Our data illustrate that while 16S rDNA cloning and cultivation generally describe similar relationships between soil microbial communities, significant discrepancies can occur.

Novel techniques for analysing microbial diversity in natural and perturbed environments

Molecular techniques were applied for analysing the entire bacterial community, including both the cultivated and non-cultivated part of the community. DNA was extracted from samples of soils and sediments, and a combination of different molecular methods were used to investigate community structure and diversity in these environments. Reassociation of sheared and thermally denatured DNA in solution was used to measure the total genetical diversity. PCR-denaturing gradient gel electrophoresis (DGGE) analysis of rRNA genes gave information about changes in the numerically dominating bacterial populations. Hybridisation with phylogenetic group specific probes, and sequencing provided information about the affiliation of the bacterial populations. Using DNA reassociation analysis we demonstrated that bacterial communities in pristine soil and sediments may contain more than 10,000 different bacterial types. The diversity of the total soil community was at least 200 times higher than the diversity of bacterial isolates from the same soil. This indicates that the culturing conditions select for a distinct subpopulation of the bacteria present in the environment. Molecular methods were applied to monitor the effects of perturbations due to antropogenic activities and pollution on microbial communities. Our investigations show that agricultural management, fish farming and pollution may lead to profound changes in the community structure and a reduction in the bacterial diversity.

Monitoring impact of a pesticide treatment on bacterial soil communities by metabolic and genetic fingerprinting in addition to conventional testing procedures

Herbogil (dinoterb), a reference herbicide, the mineral oil Oleo (paraffin oil used as an additive to herbicides), and Goltix (metamitron) were taken as model compounds for the study of impacts on microbial soil communities. After the treatment of soil samples, effects on metabolic sum parameters were determined by monitoring substrate-induced respiration (SIR) and dehydrogenase activity, as well as carbon and nitrogen mineralization. These conventional ecotoxicological testing procedures are used in pesticide registration. Inhibition of biomass-related activities and stimulation of nitrogen mineralization were the most significant effects caused by the application of Herbogil. Even though Goltix and Oleo were used at a higher dosage (10 times higher), the application of Goltix resulted in smaller effects and the additive Oleo was the least-active compound, with minor stimulation of test parameters at later observation times. The results served as a background for investigation of the power of "fingerprinting" methods in microbial ecology. Changes in catabolic activities induced by treatments were analyzed by using the 95 carbon sources provided by the BIOLOG system. Variations in the complex metabolic fingerprints demonstrated inhibition of many catabolic pathways after the application of Herbogil. Again, the effects of the other compounds were expressed at much lower levels and comprised stimulations as well as inhibitions. Testing for significance by a multivariate t test indicated that the sensitivity of this method was similar to the sensitivities of the conventional testing procedures. The variation of sensitive carbon sources, as determined by factor weights at different observation times, indicated the dynamics of the community shift induced by the Herbogil treatment in more detail. DNA extractions from soil resulted in a collection of molecules representing the genetic composition of total bacterial communities. Distinct and highly reproducible community patterns, or genetic fingerprints, resulting from application of the different herbicides were obtained by the sequence-specific separation of partial 16S rDNA amplification products in temperature gradient gel electrophoresis. Significant pattern variations were quantified. For detailed analysis, application-responsive bands from the Herbogil and Oleo treatments were sequenced and their tentative phylogenetic positions were identified. Data interpretation and the potentials and biases of the additional observation windows on microbial communities are discussed.

A molecular view of microbial diversity in a dynamic landfill in Québec

An Aroclor 1260 (polychlorinated biphenyl, PCB)-laden soil and one heavily contaminated with polycyclic aromatic hydrocarbons (PAHs) from a secure, engineered landfill site in Québec were analyzed for microbial diversity using a clone library of the 16S rDNA sequences. Phylogenetic analysis revealed that three phyla and their major subdivisions of the domain Bacteria were highly represented in these samples despite the high pollution, particularly by PAHs. None of the 16S rDNA sequences obtained matched known sequences from cultivated bacterial species or from 16S rDNA sequences amplified directly from other environmental samples.

Methods for microbial DNA extraction from soil for PCR amplification

Amplification of DNA from soil is often inhibited by co-purified contaminants. A rapid, inexpensive, large-scale DNA extraction method involving minimal purification has been developed that is applicable to various soil types (1). DNA is also suitable for PCR amplification using various DNA targets. DNA was extracted from 100g of soil using direct lysis with glass beads and SDS followed by potassium acetate precipitation, polyethylene glycol precipitation, phenol extraction and isopropanol precipitation. This method was compared to other DNA extraction methods with regard to DNA purity and size.

Functional diversity in fungi

Diversity has various meanings but generally they reflect the variation in species assemblages within a community. Species establish interpopulation relationships that lead to stable community structure, and stable and resilient communities by definition contain a certain level of diversity. Communities with too great or too little diversity predictably undergo rapid change. Studies of fungal diversity have been limited by taxonomic and logistical difficulties in collecting and defining fungal individuals and species. Succession of fungi on substrates, seasonal fluctuations, inconsistent isolation techniques, and other considerations have also led to problems in assessing fungal species diversity. Although the problem has now been identified it is not likely that significant additions to our taxonomic knowledge will soon be useful in saving rapidly disappearing ecosystems. However, calculations of fungal diversity are not limited to taxonomic information. Several approaches provide measurements of functional diversity in situations where taxonomic information is poorly defined. These include using binary biochemical and physiological descriptors to characterize isolates, evaluating enzymatic capabilities for utilizing particular substrates and extracting DNA or RNA from the soil or other substrate and probing for genes that code for functional enzymes. Such functional approaches can provide timely information on the contribution of fungi to community diversity and toward the establishment of predictors of community stability. This paper reviews the problems in assessing fungal diversity and evaluates potential techniques for determining fungal diversity from a functional perspective. Key words: fungal, microbial diversity, biodiversity, ecology.

Multicellular Organization in a Degradative Biofilm Community

Diclofop methyl, a commercial herbicide, was used as the sole carbon source to cultivate diclofop-degrading biofilms in continuous-flow slide culture. The biofilms were analyzed by using scanning confocal laser microscopy and image analysis. Spatial relationships among members of the community were distinctive to diclofop-grown biofilms. These relationships did not develop when the biofilms were grown on more labile substrates but were conserved when the biofilms were cultivated with other chlorinated ring compounds. The structures included conical bacterial consortia rising to 30 μm above the surrounding biofilm, grape-like clusters of cocci embedded in a matrix of perpendicularly oriented bacilli, and other highly specific patterns of intra- and intergeneric cellular coaggregation and growth. These unique consortial relationships indicated that syntrophic interactions may be necessary for optimal degradation of diclofop methyl and other chlorinated ring compounds.

Effect of Organic Matter Decomposition Level on Bacterial Species Diversity and Composition in Relationship to Pythium Damping-Off Severity

Rhizosphere bacteria were isolated from root tip segments of cucumber seedlings grown in a suppressive, slightly decomposed light-colored peat mix, a conducive, more decomposed dark-colored peat mix, and a suppressive dark peat mix amended with composted hardwood bark. The bacteria were identified by a gas chromatographic fatty acid methyl ester analysis. The total number of taxa recovered from a single root tip segment ranged from 9 to 18. No single taxon predominated on all root tip segments harvested from any of the mixes. The highest relative population density reached by a given taxon on any root tip segment was 45%. Hill's first and second diversity numbers, the modified Hill's ratio, and Hurlbert's rarefaction method, which were used as measures of species diversity, indicated that the organic matter decomposition level of the potting mixes did not affect bacterial species diversity. Bray-Curtis polar ordination and Dice resemblance functions, however, indicated that the organic matter decomposition level of a mix significantly influenced the composition of bacterial species in the rhizosphere. Pseudomonas spp. and other taxa capable of inducing suppression of pythium damping-off predominated in the suppressive mixes. These organisms were absent from the conducive mix, in which Arthrobacter and Bacillus spp. predominated. Although effective bacterial biocontrol agents were isolated from both the suppressive mixes and the conducive mix, the majority were isolated from the less decomposed suppressive mixes. Finally, the efficacy of strains was significantly greater in the slightly decomposed light peat mix than in the decomposed dark peat mix. Natural disease suppression within these mixes was associated with the organic matter decomposition level and the bacterial species compositions of the mixes.

Response of microbial populations to environmental disturbance

Taxonomic and genetic diversities of microbial communities disturbed by chemical pollutants were lower than in undisturbed reference communities. The dominant populations within the disturbed communities had enhanced physiological tolerances and substrate utilization capabilities, indicating that generalized physiological versatility is an adaptive characteristic of populations that successfully compete within disturbed communities.