Microplastics Are Contaminants of Emerging Concern in Freshwater Environments: An Overview

Effect of emerging pollutants on the gut microbiota of freshwater animals: Focusing on microplastics and pesticides

In recent years, emerging environmental pollutants have increasingly endangered the health of freshwater organisms. The gut microbiota exhibits sensitivity to medications, dietary factors and environmental pollutants, rendering it a novel target for toxicological studies. The gut microbiota can be a potential exposure route affecting the host's health. Herein, we review the current knowledge on two different but concurrent pollutants, microplastics and pesticides, regarding their impact on the gut microbiota, which includes alterations in microbial composition, gene expression, function, and health effects in the hosts. Moreover, synergetic interactions between microplastics and pesticides can exacerbate dysbiosis and health risks. We discuss health-related implications of gut microbial changes based on the consequences in metabolism, immunity, and physiology function. Further research is needed to discover the mechanisms underlying these effects and develop strategies for mitigating their harmful impacts on freshwater animals.

Size Distributions of Microplastics in the St Louis Estuary and Western Lake Superior

Identifying the sources and fate of microplastics in natural systems has garnered a great deal of attention because of their implications for ecosystem health. This work characterizes the size fraction, morphology, color, and polymer composition of microplastics in western Lake Superior and its adjacent harbor sampled in August and September 2021. The results reveal that the overall microplastic counts are similar, with the harbor stations ranging from 0.62 to 3.32 microplastics per liter and the lake stations ranged from 0.83 to 1.4 microplastics per liter. However, meaningful differences between the sample locations can be seen in the size fraction trends and polymer composition. Namely, the harbor samples had relatively larger amounts of the largest size fraction and more diversity of polymer types, which can be attributed to the urbanized activity and shorter water residence time. Power law size distribution modeling reveals deviations that help in the understanding of potential sources and removal mechanisms, although it significantly underpredicts microplastic counts for smaller-sized particles (5-45 μm), as determined by comparison with concurrently collected microplastic samples enumerated by Nile Red staining and flow cytometry.

Polyurethane reinforced with micro/nano waste slag as a shielding panel for photons (experimental and theoretical study)

This study not only provides an innovative technique for producing rigid polyurethane foam (RPUF) composites, but it also offers a way to reuse metallurgical solid waste. Rigid polyurethane (RPUF) composite samples have been prepared with different proportions of iron slag as additives, with a range of 0-25% mass by weight. The process of grinding iron slag microparticles into iron slag nanoparticles powder was accomplished with the use of a high-energy ball mill. The synthesized samples have been characterized using Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscope. Then, their radiation shielding properties were measured by using A hyper-pure germanium detector using point sources 241Am, 133 BA, 152 EU, 137Cs, and 60Co, with an energy range of 0.059-1.408 MeV. Then using Fluka simulation code to validate the results in the energy range of photon energies of 0.0001-100 MeV. The linear attenuation coefficient, mass attenuation coefficient, mean free path, half-value layer and tenth-value layer, were calculated to determine the radiation shielding characteristics of the composite samples. The calculated values are in good agreement with the calculated values. The results of this study showed that the gamma-ray and neutron attenuation parameters of the studied polyurethane composite samples have improved. Moreover, the effect of iron slag not only increases the gamma-ray attenuation shielding properties but also enhances compressive strength and the thermal stability. Which encourages us to use polyurethane iron-slag composite foam in sandwich panel manufacturing as walls to provide protection from radiation and also heat insulation.

Microplastic Pollution in High Population Density Zones of Selected Rivers from Southeast Asia

Southeast Asia (SEA) faces significant environmental challenges due to rapid population growth and economic activity. Rivers in the region are major sources of plastic waste in oceans. Concerns about their contribution have grown, but knowledge of microplastics in the area is still limited. This article compares microplastic levels in sediment and water from urban zones of three major rivers in SEA: Chao Phraya River (Thailand), Saigon River (Vietnam), and Citarum River (Indonesia). The study reveals that in all three rivers, microplastics were found, with the highest concentrations in Chao Phraya's water (80 ± 60 items/m3) and Saigon's sediment (9167 ± 4559 items/kg). The variations in microplastic sizes and concentrations among these rivers may be attributed to environmental factors and the exposure duration of plastic to the environment. Since these rivers are important water supply sources, rigorous land-use regulations and raising public awareness are crucial to mitigate plastic and microplastic pollution.

Micro(nano)plastics and Their Potential Impact on Human Gut Health: A Narrative Review

Microplastics and nanoplastics (MNPs) are becoming an increasingly severe global problem due to their widespread distribution and complex impact on living organisms. Apart from their environmental impact, the effects of MNPs on living organisms have also continued to attract attention. The harmful impact of MNPs has been extensively documented in marine invertebrates and larger marine vertebrates like fish. However, the research on the toxicity of these particles on mammals is still limited, and their possible effects on humans are poorly understood. Considering that MNPs are commonly found in food or food packaging, humans are primarily exposed to them through ingestion. It would be valuable to investigate the potential harmful effects of these particles on gut health. This review focuses on recent research exploring the toxicological impacts of micro- and nanoplastics on the gut, as observed in human cell lines and mammalian models. Available data from various studies indicate that the accumulation of MNPs in mammalian models and human cells may result in adverse consequences, in terms of epithelial toxicity, immune toxicity, and the disruption of the gut microbiota. The paper also discusses the current research limitations and prospects in this field, aiming to provide a scientific basis and reference for further studies on the toxic mechanisms of micro- and nanoplastics.

Quantification and characterization of microplastics in coastal environments: Insights from laser direct infrared imaging

The study identified and quantified nine plastic polymers frequently detected in the environment by collecting sediment and seawater samples from coastal areas in Auckland, New Zealand. Polymer types, size distributions, and number of microplastics (MPs) were analyzed using a laser direct infrared (LDIR) imaging technique. Compared to conventional spectroscopic or microscopic methods, LDIR enabled capturing and quantifying MPs in much lower size ranges (20-5000 μm). The results demonstrated the widespread occurrence of MPs in the Auckland coastal environment, with polyethylene terephthalate (PET) being the most frequently detected plastic polymer. MP contamination levels ranged from 13 to 83 particles per liter of coastal water and from 1200 to 3400 particles/kg of dry sand in beach sediments. Six additional locations were investigated to assess the contribution of MPs from stormwater drains to the coastal environment. The total count of identified MPs extracted from sediments near stormwater drains reached a maximum of 18,000 particles/kg of dry sand, representing an order of magnitude increase compared to MP levels found in beach sediments at the same location. In contrast to the prevalence of PET and polyamide observed in beach sediments and coastal waters, polyurethane and polyethylene emerged as the predominant plastic polymers in the vicinity of stormwater drain sediments, implying that the variation could potentially stem from distinct sources of plastics. This significant disparity in quality and quantity underscored the potential link between urban runoff and MP pollution in marine ecosystems. A sample preparation method using 100 g sediment samples was developed and used to assess and compare MPs detection in sediment samples. The commonly used 5 g sample method showed higher extraction efficiency and better detection of the most abundant MPs, but the new 100 g method enabled the detection of previously missed, less abundant plastics.

Production and characterization of human hair keratin bioplastic films with novel plasticizers

Since their invention, conventional plastics have contributed in the betterment of the society in numerous ways, nevertheless their deleterious impacts on the natural ecosystems and living creatures is irrefutable. The management of plastic waste generated is a concern worldwide and therefore quest for the plastic alternates or bioplastics is imminent. Here, we explore the suitability of keratin from human hair waste as the candidate for the production of bioplastic films. Keratin extracted from hair was used to form the films or 'kertics' by solution casting and curing. Ethanediol, di-ethylene glycol and tri-ethylene glycol were used as novel plasticizers along with glycerol in the keratin film formation. The film prepared were of the thickness 190-220 µm with the area of about 4.54 ± 0.2 cm2. Water uptake by G100, ED100, DEG100 and TEG100 films was recorded to be 4.8, 6.2, 4.9 and 6.3% respectively. FESEM analysis revealed that the films with 100 µl of 1% glycerol (G100) had continuous surface morphology except few pits of 0.1 µm, also DEG100 and TEG100 films have the most uniform surface morphology with no evident pits, holes or bulges. X-ray diffractogram showed characteristic peak of keratin at 19.5° and the d-spacing value observed was 0.45 nm. The FTIR studies suggested that the films retained keratin in non degraded form, and possessed the characteristic Amide peaks. The films were also found to be biodegradable in studies involving keratinophilic fungal strain of A. oryzae. These films could found potential applications in packaging industry, disposable items manufacturing and biomaterial generation.

Effect of Mass Fraction on Leaching Kinetics of Hydrophobic Ultraviolet Stabilizers in Low-Density Polyethylene

The leaching kinetics of five hydrophobic ultraviolet (UV) stabilizers from low-density polyethylene (LDPE) (micro)fibers into water was evaluated in this study, with variation of the mass fraction (ω = 0.1-2.0 wt %) of the stabilizers. A one-dimensional convection-diffusion model for a cylindrical geometry, requiring partitioning between the LDPE fibers and water (KLDPEw) and the internal diffusion coefficients (DLDPE), was used to evaluate the leaching process and the leaching half-life of the target UV stabilizers at ω < 0.5 wt % (Case I). Diffusion through the aqueous boundary layer is the rate-determining step, and the leaching half-life is predicted to be very long (a few months to years) under unaffected conditions. When the UV stabilizers are supersaturated within LDPE fibers (i.e., ω > 0.5 wt %, Case II), the possible formation of a surficial crystal layer of the additives on the LDPE fiber extends the time scale for leaching compared to that in Case I due to the requirement of overcoming the crystallization energy. This study provides a fundamental understanding of the leaching profiles of plastic additives for assessing their potential chemical risks in aquatic environments; further studies under the relevant environmental conditions are required.

Dose-dependent toxicity of polyethylene microplastics (PE-MPs) on physiological and biochemical response of blackgram and its associated rhizospheric soil properties

Microplastic contamination in terrestrial ecosystem is emerging as a global threat due to rapid production of plastic waste and its mismanagement. It affects all living organisms including plants. Hence, the current study aims at understanding the effect of polyethylene microplastics (PE-MPs) at different concentrations (0, 0.25, 0.50, 0.75, and 1.00% w/w) on the plant growth and yield attributes. With blackgram as a test crop, results revealed that a maximum reduction in physiological traits like photosynthetic rate; chlorophyll a, b; and total chlorophyll by 5, 14, 10, and 13% at flowering stage; and an increase in biochemical traits like ascorbic acid, malondialdehyde, proline, superoxide dismutase, and catalase by 11, 29.7, 16, 22, and 30% during vegetative stage was observed with 1% PE-MP application. Moreover, a reduction in growth and yield attributes was also observed with increasing concentration of microplastics. Additionally, application of 1% PE-MPs decreased the soil bulk density, available phosphorus, and potassium, whereas the EC, organic carbon, microbial biomass carbon, NO3-N, and NH4-N significantly increased. Moreover, the presence of PE-MPs in soil also had a significant influence on the soil enzyme activities. Metagenomic analysis (16 s) reveals that at genus level, Bacillus (19%) was predominant in control, while in 1% PE-MPs, Rubrobacter (28%) genus was dominant. Microvirga was found exclusively in T5, while the relative abundance of Gemmatimonas declined from T1 to T5. This study thus confirms that microplastics exert a dose-dependent effect on soil and plant characteristics.

Flexible, Thermally Stable, and Ultralightweight Polyimide-CNT Aerogel Composite Films for Energy Storage Applications

Polyimide (PI) aerogels are promising in various fields of application, ranging from thermal insulators to aerospace. However, they are typically in the form of a bulk monolith, which suffers from a lack of conformability and drapability. Moreover, their electrical conductivity is limited, and they mainly display an insulative behavior. These shortcomings can limit the applications of PI aerogels in energy storage systems, which require ultralightweight flexible conductive films, which at the same time offer high thermal stability, ultralow density, and high surface area. To overcome these obstacles, the present study reports the fabrication of PI-carbon nanotube (PI-CNT) aerogel composite films with varying CNT content prepared through a sol-gel preparation method, followed by a supercritical drying procedure. Compared to pristine PI aerogels, which displayed a large shrinkage and density of 18.3% and 0.12 g cm-3, respectively, the incorporation of only 5 wt % CNTs resulted in a significant reduction of both shrinkage and density to only 11.5% and 0.10 g cm-3, respectively. This suggests the importance of CNTs in improving the dimensional stability of aerogels and creating a robust network. Further characterizations showed that incorporation of 5 wt % CNTs also resulted in the highest pore volume (1.25 cm3 g-1), highest surface area (324 m2 g-1), highest real permittivity (80), highest electrical conductivity (3 × 10-1 S m-1), and ultrahigh service temperature (575 °C). It was also shown that the aerogel films can withstand a large degree of bending, can be twisted, and can be fully rolled with no obvious cracks propagated in the structure. The combined outstanding properties of the developed aerogel composite films make them promising potential candidates for supercapacitor electrodes. Therefore, the electrochemical performance of the devices based on aerogel electrodes was further studied. The device demonstrated a high energy density of 2.6 Wh kg-1 at a power density of 303.8 W kg-1. The total capacitance after 5000 cycles was 91.8% of the initial capacitance, which indicated excellent stability and durability of the device. Overall, this work provides a facile yet effective methodology for the development of high-performance aerogel materials for energy storage applications.

Decadal Assessment of Microplastics, Pharmaceuticals, and Pesticides as Contaminants of Emerging Concern in Kenya's Surface Waters: A Review

Studies investigating microplastics, pharmaceuticals, and pesticides as contaminants of emerging concern (CECs) in surface water sources in Kenya are reviewed. Contaminants of emerging concern are chemicals that have recently been discovered that may pose a threat to the environment, aquatic life, and human life. Microplastics in surface waters range from 1.56 to as high as 4520 particles/m3 , with high concentrations recorded in coastal waters. The dominant microplastics are fibers, fragments, and films, with foams, granules, and pellets making up only a small percentage. The main source of pharmaceuticals in water sources is not wastewater-treatment plants but rather raw untreated sewage because high concentrations are found near informal settlements with poor sewage connectivity. Antibiotics are detected in the range of the limit of quantification to 320 μg/L, with sulfamethoxazole, trimethoprim, and ciprofloxacin being the most abundant antibiotics. The high frequency of detection is attributed to the general misuse of antibiotics in the country. A health risk assessment indicated that only ciprofloxacin and acetaminophen posed noncarcinogenic health risks in the Ndarugo River and Mombasa periurban creeks, respectively. Similarly, the detection of antiretroviral drugs, mainly lamivudine, nevirapine, and zidovudine, is associated with human immunodeficiency virus prevalence in Kenya. In the Lake Naivasha, Nairobi River, and Lake Victoria basins, frequently detected organochloride pesticides (OCPs) are methoxychlor, alachlor, endrin, dieldrin, endosulfan, endosulfan sulfate, α-hexachlorocyclohexane (α-HCH), γ-HCH, and dichlorodiphenyltrichloroethane (DDT), some of which occur above permissible concentrations. The presence of DDT in some sites translates to illegal use or historical application. The majority of individual OCPs posed no noncarcinogenic health risk, except dieldrin and aldrin which had a hazard quotient >1 in two sites. Therefore, more surveying and regular monitoring in different regions in Kenya concerning CECs is essential to determine the spatial variability and effective measures to be taken to reduce pollution. Environ Toxicol Chem 2023;42:2105-2118. © 2023 SETAC.

Microplastic pollution in riverine ecosystems: threats posed on macroinvertebrates

Microplastics (MPs) are pollutants of emerging concern that have been reported in terrestrial and aquatic ecosystems as well as in food items. The increasing production and use of plastic materials have led to a rise in MP pollution in aquatic ecosystems. This review aimed at providing an overview of the abundance and distribution of MPs in riverine ecosystems and the potential effects posed on macroinvertebrates. Microplastics in riverine ecosystems are reported in all regions, with less research in Africa, South America, and Oceania. The abundance and distribution of MPs in riverine ecosystems are mainly affected by population density, economic activities, seasons, and hydraulic regimes. Ingestion of MPs has also been reported in riverine macroinvertebrates and has been incorporated in caddisflies cases. Further, bivalves and chironomids have been reported as potential indicators of MPs in aquatic ecosystems due to their ability to ingest MPs relative to environmental concentration. Fiber and fragments are the most common types reported. Meanwhile, polyethylene, polypropylene, polystyrene, polyethylene terephthalate (polyester), polyamide, and polyvinyl chloride are the most common polymers. These MPs are from materials/polymers commonly used for packaging, shopping/carrier bags, fabrics/textiles, and construction. Ingestion of MPs by macroinvertebrates can physically harm and inhibit growth, reproduction, feeding, and moulting, thus threatening their survival. In addition, MP ingestion can trigger enzymatic changes and cause oxidative stress in the organisms. There is a need to regulate the production and use of plastic materials, as well as disposal of the wastes to reduce MP pollution in riverine ecosystems.

Prevailing impacts of river management on microplastic transport in contrasting US streams: Rethinking global microplastic flux estimations

While microplastic inputs into rivers are assumed to be correlated with anthropogenic activities and to accumulate towards the sea, the impacts of water management on downstream microplastic transport are largely unexplored. A comparative study of microplastic abundance in Boulder Creek (BC), and its less urbanized tributary South Boulder Creek (SBC), (Colorado USA), characterized the downstream evolution of microplastics in surface water and sediments, evaluating the effects of urbanization and flow diversions on the up-to-downstream profiles of microplastic concentrations and loads. Water and sediment samples were collected from 21 locations along both rivers and microplastic properties determined by fluorescence microscopy and Raman spectroscopy. The degree of catchment urbanization affected microplastic patterns, as evidenced by greater water and sediment concentrations and loads in BC than the less densely populated SBC, which is consistent with the differences in the degree of urbanization between both catchments. Microplastic removal through flow diversions was quantified, showing that water diversions removed over 500 microplastic particles per second from the river, and caused stepwise reductions of downstream loads at diversion points. This redistribution of microplastics back into the catchment should be considered in large scale models quantifying plastic fate and transport to the oceans.

Natural and Natural-Based Polymers: Recent Developments in Management of Emerging Pollutants

Anthropogenic activities lead to the issue of new classes of pollutants in the environment that are not currently monitored in environmental studies. This category of pollutants (known as emerging contaminants) includes a very wide range of target substances, such as pharmaceuticals, plant protection products, personal care products, dyes, toxins, microplastics and many other industrially important intermediaries. Together with an increasing demand for clean water (both for agricultural necessities and for the increasing population consumption), the need for the removal of emerging pollutants, simultaneously with the current "green chemistry" approach, opens the door for the industrial application of natural polymers in the area of environmental protection. Recent developments in this area are presented in this paper, as well as the application of these particular natural materials for the removal of other contaminants of interest (such as radioisotopes and nanoparticles). The current knowledge regarding the processes' kinetics is briefly presented, as well as the future development perspectives in this area.

Presence, variation, and potential ecological impact of microplastics in the largest shallow lake of Central Europe

The presence of microplastics (MPs) in the global ecosystem has generated a rapidly growing concern worldwide. Although their presence in the marine environment has been well-studied, much less data are available on their abundance in freshwaters. MPs alone and in combination with different chemicals has been shown to cause acute and chronic effects on algae and aquatic invertebrate and vertebrate species at different biological levels. However, the combined ecotoxicological effects of MPs with different chemicals on aquatic organisms are still understudied in many species and the reported data are often controversial. In the present study, we investigated, for the first time, the presence of MPs in Lake Balaton, which is the largest shallow lake of Central Europe and an important summer holiday destination. Moreover, we exposed neonates of the well-established ecotoxicological model organism Daphnia magna to different MPs (polystyrene [3 μm] or polyethylene [≤ 100 μm]) alone and in combination with three progestogen compounds (progesterone, drospirenone, levonorgestrel) at an environmentally relevant concentration (10 ng L^-1) for 21 days. The presence of 7 polymer types of MPs in the size range of 50-100 μm was detected in Lake Balaton. Similarly to the global trends, polypropylene and polyethylene MPs were the most common types of polymer. The calculated polymer-independent average particle number was 5.5 particles m^-3 (size range: 50 μm - 100 μm) which represents the values detected in other European lakes. Our ecotoxicological experiments confirmed that MPs and progestogens can affect D. magna at the behavioral (body size and reproduction) and biochemical (detoxification-related enzyme activity) levels. The joint effects were negligible. The presence of MPs may lead to reduced fitness in the aquatic biota in freshwaters such as Lake Balaton, however, the potential threat of MPs as vectors for progestogens may be limited.

Current levels of microplastic pollution impact wild seabird gut microbiomes

Microplastics contaminate environments worldwide and are ingested by numerous species, whose health is affected in multiple ways. A key dimension of health that may be affected is the gut microbiome, but these effects are relatively unexplored. Here, we investigated if microplastics are associated with changes in proventricular and cloacal microbiomes in two seabird species that chronically ingest microplastics: northern fulmars and Cory's shearwaters. The amount of microplastics in the gut was significantly correlated with gut microbial diversity and composition: microplastics were associated with decreases in commensal microbiota and increases in (zoonotic) pathogens and antibiotic-resistant and plastic-degrading microbes. These results illustrate that environmentally relevant microplastic concentrations and mixtures are associated with changes in gut microbiomes in wild seabirds.

Microplastics pollution in the river Karnaphuli: a preliminary study on a tidal confluence river in the southeast coast of Bangladesh

Bangladesh is a deltaic country in Asia, and its riverine systems ultimately drain into the Bay of Bengal. Plastic is a severe environmental issue for coastal-marine ecosystems due to the indiscriminate usage and discarding of plastic items in the upstream river that eventually find their route into the Bay of Bengal. Microplastics (MPs) are widespread pollutants in almost all environmental compartments, including aquatic environments. This study aimed to quantify and understand the distribution of microplastics in surface water and sediments of the river Karnaphuli, a tidal confluence river adjacent to the Chattogram seaport city of Bangladesh, a highly inhabited and industrial area on the southeast coast of the Bay of Bengal. A manta trawl net (300-µm mesh size) was used to collect surface water samples, while an Ekman dredge was used to collect sediment samples. The concentrations of microplastics in the surface water of the river Karnaphuli during late monsoon, winter, and early summer were recorded to be 120,111.11, 152,222.22, and 164,444.44 items/km², respectively, while in sediments, those were recorded to be 103.83, 137.50, and 103.67 items/kg, respectively. A higher abundance of microplastics was observed in downstream surface water (228,888.88 items/km²) and sediments (164.17 items/kg). Smaller sizes (0.3 to 0.5 mm) of microplastics were predominant, fibers or threads were the frequent types, and black was the most common color in the river Karnaphuli. The Fourier transform infrared analysis revealed that polyethylene terephthalate (surface water: 22%, sediments: 19%), polyamide (surface water: 15%, sediments: 13%), polyethylene (surface water: 12%, sediments: 18%), polystyrene (surface water: 13%, sediments: 11%), and alkyd resin (surface water: 13%, sediments: 10%) were the most prevalent polymers in the river Karnaphuli. Moreover, there was a moderate positive correlation between MPs abundance in surface water and sediments. Therefore, improved long-term research (in different seasons with horizontal and vertical monitoring) is necessary in order to accurately determine the flux of microplastics from the river Karnaphuli to the Bay of Bengal.

Maternal exposure to polystyrene microplastics alters placental metabolism in mice

INTRODUCTION

The rapid growth in the worldwide use of plastics has resulted in a vast accumulation of microplastics in the air, soil and water. The impact of these microplastics on pregnancy and fetal development remains largely unknown. In pregnant mice, we recently demonstrated that exposure to micro- and nanoplastics throughout gestation resulted in significant fetal growth restriction. One possible explanation for reduced fetal growth is abnormal placental metabolism.

OBJECTIVES

To evaluate the effect of maternal exposure to microplastics on placental metabolism.

METHODS

In the present study, CD-1 pregnant mice were exposed to 5 μm polystyrene microplastics in filtered drinking water at one of four concentrations (0 ng/L (controls), 10² ng/L, 10⁴ ng/L, 10⁶ ng/L) throughout gestation (n = 7-11/group). At embryonic day 17.5, placental tissue samples were collected (n = 28-44/group). Metabolite profiles were determined using ¹ H high-resolution magic angle spinning magnetic resonance spectroscopy.

RESULTS

The relative concentration of lysine (p = 0.003) and glucose (p < 0.0001) in the placenta were found to decrease with increasing microplastic concentrations, with a significant reduction at the highest exposure concentration. Multivariate analysis identified shifts in the metabolic profile with MP exposure and pathway analysis identified perturbations in the biotin metabolism, lysine degradation, and glycolysis/gluconeogenesis pathways.

CONCLUSION

Maternal exposure to microplastics resulted in significant alterations in placental metabolism. This study highlights the potential impact of microplastic exposure on pregnancy outcomes and that efforts should be made to minimize exposure to plastics, particularly during pregnancy.

Can aged microplastics be transport vectors for organic micropollutants? - Sorption and phytotoxicity tests

Microplastics have been investigated over the last decade as potential transport vectors for other pollutants. However, the specific role of plastic aging, in which plastics change their characteristics over time when exposed to environmental agents, has been overlooked. Therefore, sorption experiments were herein conducted using virgin and aged (by ozone treatment or rooftop weathering) microplastic particles of LDPE - low-density polyethylene, PET - poly(ethylene terephthalate), or uPVC - unplasticized poly(vinyl chloride). The organic micropollutants (OMPs) selected as sorbates comprise a diversified group of priority substances and contaminants of emerging concern, including pharmaceutical substances (florfenicol, trimethoprim, diclofenac, tramadol, citalopram, venlafaxine) and pesticides (alachlor, clofibric acid, diuron, pentachlorophenol), analyzed at trace concentrations (each ≤100 μg L^-1). Sorption kinetics and equilibrium isotherms were obtained, as well as the confirmation that the aging degree of microplastics plays a major role in their sorption capacities. The results show an increased sorption of several OMPs on aged microplastics when compared to pristine samples, i.e. the sorption capacity increasing from one or two sorbed substances (maximum 3 μg g^-1 per sorbate) up to nine after aging (maximum 10 μg g^-1 per sorbate). The extent of sorption depends on the OMP, polymer and the effectiveness of the aging treatment. The modifications (e.g. in the chemical structure) between virgin and aged microplastics were linked to the increased sorption capacity of certain OMPs, allowing to better understand the different affinities observed. Additionally, phytotoxicity tests were performed to evaluate the mobility of the OMPs sorbed on the microplastics and the potential effects (on germination and early growth) of the combo on two species of plants (Lepidium sativum and Sinapis alba). These tests suggest low or no phytotoxicity effect under the conditions tested but indicate a need for further research on the behavior of microplastics on soil-plant systems.

Microplastic Contamination and Ecological Status of Freshwater Ecosystems: A Case Study in Two Northern Portuguese Rivers

BACKGROUND

Most European rivers have not yet achieved "good" ecological status. In addition, the presence and abundance of microplastics (MPs) in freshwater is a matter of great concern to the scientific community.

METHODOLOGY

This study assesses the ecological status of four sampling sites of Selho (S1-S4) and Costa-Couros (C1-C4) rivers (Guimarães, Portugal), and the abundance of MPs in sediments and benthic macroinvertebrates (Oligochaeta) from those sites.

RESULTS

All sites of both rivers under higher pressure did not reach a "good" ecological status (S2-S3, C2-C4) based on the macroinvertebrate community. High levels of nutrients were observed at all sites in both rivers (except C2), especially phosphorus. In the Oligochaeta's gut of Costa-Couros river, the high number of MPs seems to be associated with their weight (95.25 ± 25.61 to 1069.00 ± 385.30 MPs g/fresh weight), suggesting the existence of malnutrition and digestive disorders, whereas the highest number of MPs in gut (134.00 ± 30.36 to 558.6 ± 100.70 MPs g/fresh weight) were found for the heaviest organisms of Selho.

CONCLUSIONS

Thus, sites with higher ecological status do not necessarily have lower abundance of MPs. In the sediments, urbanization seems to be the main driver for MP contamination. MP contamination is pervasive across the sediments and Oligochaeta's gut in both rivers. Since MPs have the potential to cause harm to environmental and human health, it is essential to monitor not only the ecological status of freshwaters, but also emerging pollutants such as MPs.

Ecotoxicological perspectives of microplastic pollution in amphibians

Microplastics (MPs) are contaminants widely distributed in the environment and biota. Previously, most studies focused on identifying and characterizing microplastics in the marine environment, while their impact on freshwater ecosystems remains to be determined. This review summarizes recent findings regarding MPs physiological, immunological, and genetic effects on amphibians based upon the biological relevance of this species as indicators of freshwater pollution. Data demonstrated that MPs contamination may potentially alter various physiological processes in aquatic animals, mainly in the embryonic stages. It is worthwhile noting that adverse effects might be enhanced in synergy with other pollutants. However, amphibians might counteract the effect of MPs and other pollutants through microbiota present both in the intestine and on the skin. In addition, amphibian microbial composition might also be altered by MPs themselves in a manner that leads to unpredicted health consequences in amphibians.

Review on the ecotoxicological impacts of plastic pollution on the freshwater invertebrate Daphnia

The environmental impacts of plastic pollution have recently attracted universal attention, especially in the aquatic environment. However, research has mostly been focused on marine ecosystems, even though freshwater ecosystems are equally if not more polluted by plastics. In addition, the mechanism and extent to which plastic pollution affects aquatic biota and the rates of transfer to organisms through food webs eventually reaching humans are poorly understood, especially considering leaching hazardous chemicals. Several studies have demonstrated extreme toxicity in freshwater organisms such Daphnia. When such keystone species are affected by ambient pollution, entire food webs are destabilized and biodiversity is threatened. The unremitting increase in plastic contaminants in freshwater environments would cause impairments in ecosystem functions and structure, leading to various kinds of negative ecological consequences. As various studies have reported the effects on daphnids, a consolidation of this literature is critical to discuss the limitations and knowledge gaps and to evaluate the risk posed to the aquatic environment. This review was undertaken due to the evident need to evaluate this threat. The aims were to provide a meaningful overview of the literature relevant to the potential impact of plastic pollution and associated contaminants on freshwater daphnids as primary consumers. A critical evaluation of research gaps and perspectives is conducted to provide a comprehensive risk assessment of microplastic as a hazard to aquatic environments. We outlined the challenges and limitations to microplastic research in hampering better-focused investigations that could support the development of new plastic materials and/or establishment of new regulations.

Plastisphere in lake waters: Microbial diversity, biofilm structure, and potential implications for freshwater ecosystems

Once dispersed in water, microplastic (MP) particles are rapidly colonised by aquatic microbes, which can adhere and grow onto solid surfaces in the form of biofilms. This study provides new insights on microbial diversity and biofilm structure of plastisphere in lake waters. By combining Fourier Confocal Laser Scanning Microscopy (CLSM), Transform Infrared Spectroscopy (FT-IR) and high-throughput DNA sequencing, we investigated the microbial colonization patterns on floating MPs and, for the first time, the occurrence of eukaryotic core members and their possible relations with biofilm-forming bacterial taxa within the plastisphere of four different lakes. Through PCR-based methods (qPCR, LAMP-PCR), we also evaluated the role of lake plastisphere as long-term dispersal vectors of potentially harmful organisms (including pathogens) and antibiotic resistance genes (ARGs) in freshwater ecosystems. Consistent variation patterns of the microbial community composition occurred between water and among the plastisphere samples of the different lakes. The eukaryotic core microbiome was mainly composed by typical freshwater biofilm colonizers, such as diatoms (Pennales, Bacillariophyceaea) and green algae (Chlorophyceae), which interact with eukaryotic and prokaryotic microbes of different trophic levels. Results also showed that MPs are suitable vectors of biofilm-forming opportunistic pathogens and a hotspot for horizontal gene transfer, likely facilitating antibiotic resistance spread in the environments.

Microplastics distribution and possible ingestion by fish in lacustrine waters (Lake Bracciano, Italy)

Understanding the spatial distribution patterns of microplastics (plastics < 5 mm) contributes to the assessment of sources and sinks of pollution thus providing information for the management of biota safety and overall ecosystem functionality. We chose a semi-closed study area, Lake Bracciano (Italy), to assess the environmental variability of contamination, focusing on the water compartment and the exposure of biota, specifically fish, by analysing the ingestion of microplastics. The focus of this study is to evaluate the concentration of microplastics in water (surface and column) across the lake and the ingestion of microplastics by two fish species of economic interest: Atherina boyeri and Coregonus lavaretus, inhabiting demersal and pelagic habitats respectively. Results show a surface contamination of 392,000 ± 417,000 items km^-2 and a column one of 0.76 ± 1.00 items m^-3. Fragments were the most abundant in surface while fibres in the column. Microplastics were found in C. lavaretus specimens, corresponding to contamination frequency of 5% and concentration of 0.15 items/fish. The main polymer found in water was polyethylene (81%); of minor percentages, there were various other polymers, including polystyrene and acrylic, which were also found in fish. As scientific literature provides few research where water and fish are simultaneously sampled, this investigation wants to contribute filling this knowledge gap by investigating for the first time a volcanic lake.

Microplastic load in the surface water and Tilapia sparrmanii (Smith, 1840) of the river systems of Okavango Delta, Botswana

Microplastics are 'emerging' contaminants that threatens freshwaters and may have negative impact on the aquatic organisms. However, Botswana has no information on the status of microplastics, including freshwater like the Okavango Delta- the largest, inland wetland hosting wildlife, tourism, and supporting the socio-economic lifestyle of inhabitants. This study assessed the spatial distribution and characterization of microplastics in surface water and in the digestive organs of fish (Tilapia sparrmanii) from the Okavango delta. Surface water samples (156) and whole intact fish (15) were collected and analysed for microplastic contents by wet peroxide oxidation, potassium hydroxide (fish only), density separation, extraction, and stereomicroscope identification. The weight of microplastics for surface water samples varied from 138.18 to 381.67 µg m^-3 and abundance ranged from 10.18 to 22.67 items L^-1 with significant difference observed between sites in both variables. In tilapia, the highest microplastic abundance were found in the intestines then the stomach and the gills from the fish samples. Most prevailing size ranges of microplastics in fish and water samples were 1-2 mm and 2-3 mm while the most abundant shapes were fragments and fibres, respectively. Translucent microplastics were dominant in all samples. The results indicate the presence of microplastics in the Okavango delta even though they are very low (µg m^-3). This baseline information will provide insights on the loads of microplastics in surface water and the quantities ingested by fish in the Okavango delta hence the need for monitoring. It would also guide on the need for effective policies addressing plastic and microplastic pollution.

Anthropogenically impacted lake catchments in Denmark reveal low microplastic pollution

Microplastics have been detected in lake environments globally, including in remote regions. Agricultural and populated areas are known to congregate several inputs and release pathways for microplastic. This study investigated microplastic (50-5000 µm) contamination in five Danish freshwater lakes with catchments dominated by arable land use. The concentrations in sediments (n = 3/site) and the zebra mussel, Dreissena polymorpha (n = 30/site), were calculated and compared with catchment characteristics and environmental parameters. Microplastic concentrations in sediment were relatively low (average 0.028 ± 0.017 items/g dry weight sediment) whilst only a single microplastic was found in the mussels (average 0.067 ± 0.249 items/10 individual). Hence, no relationship between the number of observed microplastics in sediment and mussels could be identified, nor could a relationship between concentration in sediment and environmental parameters. As all lakes studied received their water from moderate to heavily anthropogenically impacted catchments, it was expected that they would be sinks for microplastic with high bioavailability. Based on the results of the present study, D. polymorpha were found to not be contaminated by microplastics in the five study lakes. Thus, our results suggest that these mussels do not interact with microplastics at low concentrations. We speculate that the results on sediment and biota could be explained by several factors related to regional differences in plastic use, species characteristics, sampling size, and the fact that finding no microplastic is not always reported in the scientific literature. Thus, the paper provides insight into the dynamics between the catchment, lake, and biota in systems with low microplastic concentration.

Classification and distribution of freshwater microplastics along the Italian Po river by hyperspectral imaging

In this work, freshwater microplastic samples collected from four different stations along the Italian Po river were characterized in terms of abundance, distribution, category, morphological and morphometrical features, and polymer type. The correlation between microplastic category and polymer type was also evaluated. Polymer identification was carried out developing and implementing a new and effective hierarchical classification logic applied to hyperspectral images acquired in the short-wave infrared range (SWIR: 1000-2500 nm). Results showed that concentration of microplastics ranged from 1.89 to 8.22 particles/m3, the most abundant category was fragment, followed by foam, granule, pellet, and filament and the most diffused polymers were expanded polystyrene followed by polyethylene, polypropylene, polystyrene, polyamide, polyethylene terephthalate and polyvinyl chloride, with some differences in polymer distribution among stations. The application of hyperspectral imaging (HSI) as a rapid and non-destructive method to classify freshwater microplastics for environmental monitoring represents a completely innovative approach in this field.

Chronic toxic effects of polystyrene microplastics on reproductive parameters of male rats

Microplastics have become a significant environmental concern. However, information on toxicity of microplastics in terrestrial organisms is limited. In this study, the chronic toxic effects of polystyrene microplastics (PS-MPs) on the reproductive system and serum antioxidants of male albino Wistar rats fed for 90 days with standard rat feed containing 1–10% granules of crushed polystyrene disposable plates were evaluated. Significant reductions in volume, motility, epididymal sperm count and serum testosterone level were observed. Histological examination of testicular architecture showed distorted testes with vacuolated seminiferous tubules at the highest percentage, together with increased catalase and decreased superoxide dismutase activities. This study showed that ingestion of PS-MPs caused reproductive dysfunction in male rats and contributes to understanding the potential toxicity of microplastics in terrestrial animals.

Nanoplastics: Status and Knowledge Gaps in the Finalization of Environmental Risk Assessments

Nanoplastics (NPs) are particles ranging in size between 1 and 1000 nm, and they are a form of environmental contaminant of great ecotoxicological concern. Although NPs are widespread across ecosystems, they have only recently garnered growing attention from both the scientific community and regulatory bodies. The present study reviews scientific literature related to the exposure and effects of NPs and identifies research gaps that impede the finalization of related environmental risk assessments (ERAs). Approximately 80 articles published between 2012 and 2021 were considered. Very few studies (eight articles) focused on the presence of NPs in biotic matrices, whereas the majority of the studies (62 articles) assessed the lethal and sublethal effects of NPs on aquatic and terrestrial organisms. Whilst many studies focused on nude NPs, only a few considered their association with different aggregates. Amongst NPs, the effects of polystyrene are the most extensively reported to date. Moreover, the effects of NPs on aquatic organisms are better characterized than those on terrestrial organisms. NP concentrations detected in water were close to or even higher than the sublethal levels for organisms. An ERA framework specifically tailored to NPs is proposed.

Short-duration exposure of 3-µm polystyrene microplastics affected morphology and physiology of watermilfoil (sp. roraima)

Microplastics are one of the most widely discussed environmental issues worldwide. Several studies have shown the effect of microplastic exposure on the marine environment; however, studies on freshwater systems are lacking. This study was conducted to investigate the effect of microplastics on hydroponically growing emergent freshwater macrophytes, watermilfoil (sp. roraima) under controlled environmental conditions. Plants were exposed to 0 mg L^-1 (control), 0.05 mg L^-1, 0.25 mg L^-1, 1.25 mg L^-1, and 6 mg L^-1 of 3-µm polystyrene microspheres for 7 days. The oxidative stress, antioxidant response, pigmentations, Fv/Fm, and growth parameters in the above-water and below-water parts were analyzed separately. Microscopic observations were performed to confirm the tissue absorbance of the microplastics. Exposure to microplastics altered some parameters; however, growth was not affected. The effect of microplastics was not linear with the exposure concentration for most of the parameters and between 1.25 and 6 mg L^-1 concentrations. The response trends mostly followed the second-order polynomial distributions. Under the 1.25 mg L^-1 exposure, there were significant changes in root length, H₂O₂ content, catalase activity, anthocyanin content, and Fv/Fm. There were differences in parameters between the above-water and below-water parts, and the responses of the microplastics followed different trends. Microscopic observations confirmed the attachment of microplastic particles onto newly formed roots, except for older roots or shoot tissues.

Microplastics in the sediments of small-scale Japanese rivers: Abundance and distribution, characterization, sources-to-sink, and ecological risks

Microplastic pollution in small-scale river sediments remains mostly unknown. This study explored microplastics in the sediments of four small-scale Japanese rivers in Yamaguchi Prefecture: the Awano, Ayaragi, Asa, and Majime. Sediment samples (n = 23) were collected from the selected stations. Density separation and wet peroxidation methods were applied to extract microplastics. Polymers were detected through attenuated total reflectance-Fourier transform infrared spectroscopy. Microplastic abundance indicated relatively moderate values in the small-scale Japanese rivers compared to other rivers around the world. Large microplastics (1-5 mm) in size, fragments in shape, and high-density particles of diverse polymers dominated. Polyvinyl chloride, polyethylene, and polypropylene were the major polymers. The polymers-polyvinyl chloride, polymethylmethacrylate, polyurethane, fluorinated ethylene propylene, and polybutylene in sediments were distinct from those detected in surface water, as were the predominance of large-size (1-5 mm) and fragment-shape microplastics. In contrast to surface water, sediments preserved both common and distinctive microplastics. Thus, the riverine sediment compartment acted as microplastic sink. Scanning electron microscopic (SEM) analysis suggested the presence of weathered microplastics in sediments. Energy dispersive X-ray spectroscopic analysis (EDX) revealed metal contaminants on the microplastic surfaces, indicating synergistic hazard potentials in the riverine ecosystems. Ecological risk assessment results suggested low to very high risks of microplastic pollution for the rivers. The higher abundances of microplastics and highly toxic polymers contributed to the elevated ecological risks. Polyvinyl chloride, acrylonitrile butadiene styrene, polyurethane, and polymethylmethacrylate were the detected highly toxic polymers. The urban and residential areas affected stations ranked high to very high ecological risks. The sites posing very high ecological risks were regarded as pollution hotspots. Overall, this study developed new insights into microplastic pollution in the small-scale rivers and ecological risks for riverine environments, as well as providing a baseline for more comprehensive risk assessments and developing pollution control and management strategies.

Assessment and sources identification of microplastics, PAHs and OCPs in the Luoyuan Bay, China: Based on multi-statistical analysis

Luoyuan Bay is a mariculture influenced water body located in southeastern China. Multi-statistical techniques were applied to 21 sampling locations in the bay to identify the sources of microplastics and other pollutants in the sediment. In microplastics detection, fragment was the most abundant shape (~36%), and rayon was the dominant polymer (~59%). The size of more than 48% of total microplastics observed was less than 200 μm. The study showed that the upper part of Luoyuan Bay was dominated by microplastic pollution, while the lower part of the bay was dominated by persistent organic pollutants (PAHs, OCPs). Mariculture is one of the main sources of pollution in Luoyuan Bay. Apart from mariculture, there were additional sources such as industry, land reclamation, port, and so on; industry and land reclamation were the leading sources of microplastics, while port, industry, and mariculture were the primary sources of PAHs and OCPs.

Determination of the pharmaceuticals-nano/microplastics in aquatic systems by analytical and instrumental methods

Pharmaceutical residues and nanoplastic and microplastic particles as emerging pollutants in the aquatic environment are a subject of increasing concern in terms of the effect on water sources and marine organisms. There is lack of information about pharmaceutical-nanoplastic and pharmaceutical-microplastic mixtures. The present study aimed to investigate the fate and effect of pharmaceutical residues and nanoplastic and microplastic particles, the results of combinations of pharmaceutical residues with nanoplastic and microplastic particles, and toxic effects of pharmaceutical residues and nanoplastic and microplastic particles. Moreover, the objective was also to introduce analytical methods for pharmaceuticals, along with instrumental techniques for nanoplastic and microplastic particles in aquatic environments and organisms. PhAC alone can affect marine environments and aquatic organisms. When pharmaceutical residues combine with nanoplastic and microplastic particles, the rate of toxicity increases, and the result of this phenomenon constitutes this kind of pollutant in wastewater. Hence, the rate of mortality in organisms enhances. This study aimed to investigate the effect of pharmaceuticals residues and nanoplastic and microplastic particles, and a mixture of pharmaceutical residues and nanoplastic and microplastic particles in aquatic biota. Another object was survey methods for recognizing pharmaceutical residues and nanoplastic and microplastic particles. The findings show that pharmaceutical residues in organisms caused cell structure damage, inflammatory response, and nerve cell apoptosis. This study aimed to investigate the effect of microplastic particles in the human food chain and their impact on human health. Moreover, this review aims to present an innovative methodology based on comprehensive analytical techniques used to determine and identify pharmaceuticals adsorbed on nano- and microplastics in aquatic ecosystems. Finally, this review addresses the knowledge gaps and provides insights into future research strategies to better understand their interactions.

Microplastic accumulation in riverbed sediment via hyporheic exchange from headwaters to mainstems

In rivers, small and lightweight microplastics are transported downstream, but they are also found frequently in riverbed sediment, demonstrating long-term retention. To better understand microplastic dynamics in global rivers from headwaters to mainstems, we developed a model that includes hyporheic exchange processes, i.e., transport between surface water and riverbed sediment, where microplastic retention is facilitated. Our simulations indicate that the longest microplastic residence times occur in headwaters, the most abundant stream classification. In headwaters, residence times averaged 5 hours/km but increased to 7 years/km during low-flow conditions. Long-term accumulation for all stream classifications averaged ~5% of microplastic inputs per river kilometer. Our estimates isolated the impact of hyporheic exchange processes, which are known to influence dynamics of naturally occurring particles in streams, but rarely applied to microplastics. The identified mechanisms and time scales for small and lightweight microplastic accumulation in riverbed sediment reveal that these often-unaccounted components are likely a pollution legacy that is crucial to include in global assessments.

Selection of a density separation solution to study microplastics in tropical riverine sediment

Microplastics (MPs) are small (< 5 mm) plastic particles that are widely found in marine, freshwater, terrestrial and atmospheric environments. Due to their prevalence and persistence, MPs are considered an emerging contaminant of environmental concern. The separation and quantitation of MPs from freshwater sediments is a challenging and critical issue. It is necessary to identify the fate and sources of MPs in the environment, minimise their release and adverse effects. Compared to marine sediments, standardised methods for extracting and estimating the amount of MPs in freshwater sediments are relatively limited. The present study focuses on MP recovery efficiency of four commonly used salt solutions (NaCl, NaI, CaCl₂ and ZnCl₂) for isolating MPs during the density separation step from freshwater sediment. Known combinations of artificial MP particles (PS, PE, PVC, PET, PP and HDPE) were spiked into standard river sediment. Extraction using NaI, ZnCl₂ and NaCl solutions resulted in higher recovery rates from 37 to 97% compared to the CaCl₂ solution (28-83%) and varied between polymer types. Low-density MPs (PE, HDPE, PP and PS) were more effectively recovered (> 87%) than the denser polymers (PET and PVC: 37 to 88.8%) using NaCl, NaI and ZnCl₂ solutions. However, the effective flotation of ZnCl₂ and NaI solutions is relatively expensive and unsafe to the environment, especially in the context of developing countries. Therefore, considering the efficiency, cost and environmental criteria, NaCl solution was selected. The protocol was then tested by extracting MPs from nine riverine sediment samples from the Red River Delta. Sediments collected from urban rivers were highly polluted by MPs (26,000 MPs items·kg^-1 DW) compared to sediments located downstream. Using a NaCl solution was found to be effective in this case study and might also be used in long-term and large-scale MP monitoring programmes in Vietnam.

Biodegradation of microplastics: Better late than never

Plastics use is growing due to its applications in the economy, human health and aesthetics. The major plastic particles in the form of microplastics (MPs) released into the environment are made up of polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), and polyethylene terephthalate (PET). Tremendous usage and continuous accumulation of MPs in the environment pose a global threat to ecosystems and human health. The current knowledge of biotechnological, aerobic and aerobic biodegradation approaches emphasizes the microbial culture's potential towards MPs removal. This review selectively provides recent biotechnological advances such as biostimulation, bioaugmentation and enzymatic biodegradation that can be applied for MPs removal by biodegradation and bioaccumulation. This review summarizes the knowledge and the research exploration on the biodegradation of synthetic organic MPs with different biodegradability. However, further research is still needed to understand the underlying mechanism of MPs biodegradation in soil and water systems, leading to the development of an effective method for MPs removal.

An Environmentally Friendly Method for the Identification of Microplastics Using Density Analysis

Current methodologies for microplastic polymer identification such as Fourier-transform infrared and differential scanning calorimetry are neither cost-efficient nor practical in fieldwork. Density analysis is an inexpensive and readily transportable alternative method. However, current density analysis methods use many different hazardous solutions to carry out separation and identification of plastics. We demonstrate the use of water, sucrose, and ethanol solutions for the density analysis of microplastics. The method developed was able to successfully distinguish between and identify 8 polymers commonly found in microplastic pollution. Environ Toxicol Chem 2021;40:3299-3305. © 2021 SETAC.

Microplastics increase susceptibility of amphibian larvae to the chytrid fungus Batrachochytrium dendrobatidis

Microplastics (MPs), a new class of pollutants that pose a threat to aquatic biodiversity, are of increasing global concern. In tandem, the amphibian chytrid fungus Batrachochytrium dendrobatidis (Bd) causing the disease chytridiomycosis is emerging worldwide as a major stressor to amphibians. We here assess whether synergies exist between this infectious disease and MP pollution by mimicking natural contact of a highly susceptible species (midwife toads, Alytes obstetricans) with a Bd-infected reservoir species (fire salamanders, Salamandra salamandra) in the presence and absence of MPs. We found that MP ingestion increases the burden of infection by Bd in a dose-dependent manner. However, MPs accumulated to a greater extent in amphibians that were not exposed to Bd, likely due to Bd-damaged tadpole mouthparts interfering with MP ingestion. Our experimental approach showed compelling interactions between two emergent processes, chytridiomycosis and MP pollution, necessitating further research into potential synergies between these biotic and abiotic threats to amphibians.

Microplastic pollution in perch (Perca fluviatilis, Linnaeus 1758) from Italian south-alpine lakes

Microplastic particles (MPs) contamination of aquatic environments has raised a growing concern in recent decades because of their numerous potential toxicological effects. Although fish are among the most studied aquatic organisms, reports on MPs ingestion in freshwater environments are still scarce. Thus, there is still much to study to understand the uptake mechanisms, their potential accumulation among the food webs and their ecotoxicological effects. Here, MPs presence in the digestive system of one of the most widespread and commercially exploited freshwater fish, the perch (Perca fluviatilis, Linnaeus 1758), was investigated in four different south-alpine lakes, to assess the extent of ingestion and evaluate its relation to the body health condition. A total of 80 perch specimen have been sampled from the Italian lakes Como, Garda, Maggiore and Orta. Microplastic particles occurred in 86% of the analysed specimens, with average values ranging from 1.24 ± 1.04 MPs fish^-1 in L. Como to 5.59 ± 2.61 MPs fish^-1 in L. Garda. The isolated particles were mainly fragments, except in L. Como where films were more abundant. The most common polymers were polyethylene, polyethylene terephthalate, polyamide, and polycarbonate, although a high degree of degradation was found in 43% of synthetic particles, not allowing their recognition up to a single polymer. Despite the high number of ingested MPs, fish health (evaluated by means of Fulton's body condition and hepatosomatic index) was not affected. Instead, fullness index showed an inverse linear relationship with the number of ingested particles, which suggests that also in perch MPs presence could interfere with feeding activity, as already described for other taxa.

Orally administered nano-polystyrene caused vitellogenin alteration and oxidative stress in the red swamp crayfish (Procambarus clarkii)

Nanoplastics (≤100 nm) represent the smallest fraction of plastic litter and may result in the aquatic environment as degradation products of larger plastic material. To date, few studies focused on the interactions of micro- and nanoplastics with freshwater Decapoda. The red swamp crayfish (Procambarus clarkii, Girard, 1852) is an invasive species able to tolerate highly perturbed environments. As a benthic opportunistic feeder, this species may be susceptible to plastic ingestion. In this study, adult P. clarkii, at intermolt stage, were exposed to 100 μg of 100 nm carboxylated polystyrene nanoparticles (PS NPs) through diet in a 72 h acute toxicity test. An integrated approach was conceived to assess the biological effects of PS NPs, by analyzing both transcriptomic and physiological responses. Total hemocyte counts, basal and total phenoloxidase activities, glycemia and total protein concentration were investigated in crayfish hemolymph at 0 h, 24 h, 48 h and 72 h from PS NPs administration to evaluate general stress response over time. Differentially expressed genes (DEGs) in the hemocytes and hepatopancreas were analyzed to ascertain the response of crayfish to PS NP challenge after 72 h. At a physiological level, crayfish were able to compensate for the induced stress, not exceeding generic stress thresholds. The RNA-Sequencing analysis revealed the altered expression of few genes involved in immune response, oxidative stress, gene transcription and translation, protein degradation, lipid metabolism, oxygen demand, and reproduction after PS NPs exposure. This study suggests that a low concentration of PS NPs may induce mild stress in crayfish, and sheds light on molecular pathways possibly involved in nanoplastic toxicity.

Microplastic pollution in aquatic environments with special emphasis on riverine systems: Current understanding and way forward

Microplastics (MPs) are emerging as a severe threat in our environment. Their diverse existence in marine environments is being researched globally and thus a widely known fact; however, their presence in the freshwater counterpart has gained attention lately only. Riverine systems, the most critical freshwater resources serve as an essential link between terrestrial and marine environments and their contamination with MPs is going to create severe environmental issues. Because of their small size and unique morphology, these polymers can exhibit variable toxicity to the interacting biota and alter their habitat properties; thus, causing serious impacts on the environment and health of living beings, including humans. These microplastics can also interact with pollutants like heavy metals and organic pollutants, which further augment their harming potential. Inefficient and poor plastic waste disposal practices play an important role in the generation of microplastic pollutants. In the present COVID 19 pandemics, the excessive use of plastic to contain the spread of infection has further added the plastic load in the environment which will eventually lead to the generation of microplastic particles. Also, a significant amount of microplastic pollutants in riverine systems are delivered through wastewater treatment plant effluents. These trade-offs create a distress situation in the environment. The present study connects these key issues for a better understanding of the diverse existence of microplastic pollutants, their sources, and fate, with a special emphasis on riverine systems. A critical appraisal of the knowledge gaps and proposal of suitable solutions through this review might open up avenues for further research and effective management of the microplastics in aquatic environments.

Plastics in the Earth system

Plastic contamination of the environment is a global problem whose magnitude justifies the consideration of plastics as emergent geomaterials with chemistries not previously seen in Earth's history. At the elemental level, plastics are predominantly carbon. The comparison of plastic stocks and fluxes to those of carbon reveals that the quantities of plastics present in some ecosystems rival the quantity of natural organic carbon and suggests that geochemists should now consider plastics in their analyses. Acknowledging plastics as geomaterials and adopting geochemical insights and methods can expedite our understanding of plastics in the Earth system. Plastics also can be used as global-scale tracers to advance Earth system science.

Physical and Biodegradation Properties of Graphene Derivatives/Thermoplastic Starch Composites

Development of biodegradable materials for packaging is an issue of the utmost importance. These materials are an alternative to petroleum-based polymers, which contribute to environment pollution after disposal. In this work, graphene oxide (GO) and glucose-reduced graphene oxide (rGO-g) were incorporated to thermoplastic starch (TPS) by melt extrusion. The TPS/GO and TPS/rGO-g composites had their physical properties and biodegradability compared. X-ray diffraction (XRD) showed that the type of graphene used led to different dispersion levels of graphene sheets, and to changes in the crystalline structure of TPS. Tensile tests carried out for the compression-molded composites indicated that TPS/rGO-g composites presented better mechanical performance. The Young’s modulus (E) increased from E = (28.6 ± 2.7) MPa, for TPS, to E = (110.6 ± 9.5) MPa and to (144.2 ± 11.2) MPa for TPS with rGO-g incorporated at 1.0 and 2.0 mass% content, respectively. The acid groups from graphene derivatives promoted glycosidic bond breakage of starch molecules and improved biodegradation of the composites. GO is well-dispersed in the TPS matrix, which contributes to biodegradation. For TPS/rGO-g materials, biodegradation was influenced by rGO-g dispersion level.

Bypass of Booming Inputs of Urban and Sludge-Derived Microplastics in a Large Nordic Lake

Microplastic research, initially focusing on marine environments, left freshwater ecosystems largely unexplored. Freshwaters are also vulnerable to microplastics and are likely the largest microplastic supplier to the ocean. However, microplastic sources, transport pathways, and fluxes at the catchment level remain to be quantified, compromising efficient actions toward mitigation and remediation. Here we show that 70-90% of microplastics reaching Norway's largest lake, originating primarily from urban waste mismanagement and sludge application on crops, continue their journey toward the ocean without being buried. Indeed, our microplastic budget for the catchment shows that out of the 35.9 tons (7.4-119.4 t) of microplastics annually released into the lake, only 3.5 tons (1.3-8.8 t) are settling to the lake bottom. The spatial and vertical microplastic distribution and diversity in lake sediments, the socio-economic modeling of plastic fluxes and spatial information on land use and potential plastic sources all point toward urban and agricultural areas as emission hotspots of increasing importance. We conclude that the degree to which lake sediments represent a net microplastic sink is likely influenced by the nature of microplastics the lake receives, and ultimately on their origin.