Isolation of the exoelectrogenic denitrifying bacterium Comamonas denitrificans based on dilution to extinction

Magnetite-equipped algal-rich sediments for microbial fuel cells: Remediation of sediment organic matter pollution and mechanisms of remote electron transfer

Using the bio-electrochemical methods for the restoration of high algae sediments is full of potential and challenges. How to promote extracellular electron transfer (EET) process in microbial fuel cells (MFC) is the key bottleneck. The study had explored the potential application of magnetite on accelerating electron transfer for improving the output of MFC and sediment pollution remediation. The results indicated that the organic matter degradation rate showed a remarkable increase of 27.45 %, and the voltage output was approximately 1.68 times higher compared to the MFC configured with regular sediment. Abundant electroactive bacteria (EABs), such as Geobacter and Burkholderiaceae, and fermentative bacteria were responsible for these results, accompanied by the enhanced fluorescence of humic substances (HS), increased concentration and activity of cytochrome C (25.05 % and 21.12 %), as well as elevated extracellular polymeric substance content. Moreover, the intrinsic EET mechanisms among Fe-oxides, HS, and EABs were explored. According to the electrochemical analysis and substance transformation, the EET process involved four stages: magnetite-enhanced direct electron transfer via strong conductivity, iron respiration mediating electron transfer to the electrode, the model quinone substance acting as an electron shuttle facilitating EET and iron reduction, and iron cycling mediating electron transfer. This study provides an effective strategy for pollution remediation in algal-rich sediment, which was beneficial for the harmless treatment and resource utilization of both algae and sediment, simultaneously.

Recent progress in the characterization and application of exo-electrogenic microorganisms

Exo-electrogenic microorganisms are characterized by their special metabolic capability of transferring metabolic electrons out of their cell, into insoluble external electron acceptors such as iron or manganese oxides and electrodes, or vice versa take up electron from electrodes. Their conventional application is primarily limited to microbial fuel cells for electrical power generation and microbial electrolysis cells for the production of value-added products such as biohydrogen, biomethane and hydrogen peroxide. The utility of exo-electrogenic organisms has expanded into many other applications in recent times. Such examples include microbial desalination cells, microbial electro-synthesis cells producing value-added chemicals such as bio-butanol and their applications in other carbon sequestration technologies. Additionally, electrochemically-active organisms are now beginning to be employed in biosensor applications for environmental monitoring. Additionally, the utility of biocathodes in bio-electrochemical systems is also a novel application in catalyzing the cathodic oxygen reduction reaction to enhance their electrochemical performance. Advances have also been made in the expansion and use of other organisms such as the usage of photosynthetic microorganisms for the fabrication of self-sustained bio-electrochemical systems. This review attempts to provide a comprehensive picture of the state-of the art of exo-electrogenic organisms and their novel utility in bioelectrochemical systems.

Effect of free ammonia on partial denitrification: Long-term performance, mechanism, and feasibility of PD/Anammox-FBBR for mature landfill leachate treatment

As a stable and effective approach for NO2--N accumulation, partial denitrification (PD) could significantly cut down operation cost, and PD/Anammox (PD/A) is a promising nitrogen removal process in wastewater treatment. The biotoxicity of free ammonia (FA) to nitrifying bacteria and anammox bacteria has been demonstrated, while whether FA affects PD bacteria is an open question. Here, long-term operation of PD-fixed bed biofilm reactor (PD-FBBR) treating synthetic wastewater and mature landfill leachate was conducted to reveal the mechanism concerning the effect of FA on PD bacteria. Stable NO2--N accumulation was achieved with NO3--N to NO2--N transformation ratio (NTR) of 60-70% during 280-day operation with FA ranged from 0 to 20.71 ± 0.23 mg/L, while NTR decreased and maintained at ∼30% when FA reached 40.59 ± 0.19 mg/L. Specific NOx--N reduction rate improved at low FA concentration (< 12 mg/L), while high FA level (> 25 mg/L) had inhibitory effect on PD bacteria. Under FA stress, more extracellular polymeric substances (EPS) were secreted, and the glnA gene abundance, glutamine synthase concentration, and glutamine concentration in cell and EPS significantly increased, indicating the enhancement of glutamine biosynthesis in PD bacteria for ammonia assimilation played an important role in response to FA stress. Metagenomic sequencing showed that FA stimulated the upregulation of narK (NO3--N/NO2--N antiporter) gene abundance and enhanced uptake of NO3--N and extrusion of NO2--N. Comamonas, unclassified_f__Comamonadaceae and Thauera were highly enriched in biofilm, which played a key role in the stable NO2--N accumulation. Furthermore, a novel two stage PD/A-FBBR was applied to mature landfill leachate treatment, and satisfactory total inorganic nitrogen removal efficiency ranged from 81.38 ± 3.56% to 89.16 ± 1.57% was obtained at relatively low COD/NO3--N of 2.57-2.84. Overall, these findings demonstrated how PD bacteria respond to FA stress and confirmed the feasibility of PD/A process in high FA wastewater treatment.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Deciphering the role of granular activated carbon (GAC) in anammox: Effects on microbial succession and communication

Anaerobic ammonium oxidation (anammox) offered an energy-efficient option for nitrogen removal from wastewater. Granular activated carbon (GAC) addition has been reported that improved biomass immobilization, but the role of GAC in anammox reactors has not been sufficiently revealed. In this study, it was observed that GAC addition in an upflow anaerobic sludge blanket (UASB) reactor led to the significantly shortened anammox enrichment time (shortened by 45 days) than the reactor without GAC addition. The nitrogen removal rate was 0.83 kg N/m³/day versus 0.76 kg N/m³/day in GAC and non-GAC reactors, respectively after 255 days' operation. Acyl-homoserine lactone (AHL) quorum sensing signal molecule C8-HSL had comparable concentrations in both anammox reactors, whereas the signal molecule C12-HSL was more pervasive in the reactor containing GAC than the reactor without GAC. Microbial analysis revealed distinct anammox development in both reactors, with Candidatus Brocadia predominant in the reactor that did not contain GAC, and Candidatus Kuenenia predominant in the reactor that contained GAC. Denitrification bacteria likely supported anammox metabolism in both reactors. The analyses of microbial functions suggested that AHL-dependent quorum sensing was enhanced with the addition of GAC, and that GAC possibly augmented the extracellular electron transfer (EET)-dependent anammox reaction.

Minimizing the Lag Phase of Cupriavidus necator Growth under Autotrophic, Heterotrophic, and Mixotrophic Conditions

Cupriavidus necator has the unique metabolic capability to grow under heterotrophic, autotrophic, and mixotrophic conditions. In the current work, we examined the effect of growth conditions on the metabolic responses of C. necator. In our lab-scale experiments, autotrophic growth was rapid, with a short lag phase as the exponential growth stage was initiated in 6 to 12 h. The lag phase extended significantly (>22 h) at elevated O₂ and CO₂ partial pressures, while the duration of the lag phase was independent of the H₂ or N₂ partial pressure. Under heterotrophic conditions with acetate as the organic substrate, the lag phase length was short (<12 h), but it increased with increasing acetate concentrations. When glucose and glycerol were provided as the organic substrate, the lag phase was consistently long (>12 h) regardless of the examined substrate concentrations (up to 10.0 g/L). In the transition experiments, C. necator cells showed rapid transitions from autotrophic to heterotrophic growth in less than 12 h and vice versa. Our experimental results indicate that C. necator can rapidly grow with both autotrophic and heterotrophic substrates, while the lag time substantially increases with nonacetate organic substrates (e.g., glucose or glycerol), high acetate concentrations, and high O₂ and CO₂ partial pressures. IMPORTANCE The current work investigated the inhibition of organic and gaseous substrates on the microbial adaption of Cupriavidus necator under several metabolic conditions commonly employed for commercial polyhydroxyalkanoate production. We also proposed a two-stage cultivation system to minimize the lag time required to change over between the heterotrophic, autotrophic, and mixotrophic pathways.

Bacterial community structure of electrogenic biofilm developed on modified graphite anode in microbial fuel cell

Formation of electrogenic microbial biofilm on the electrode is critical for harvesting electrical power from wastewater in microbial biofuel cells (MFCs). Although the knowledge of bacterial community structures in the biofilm is vital for the rational design of MFC electrodes, an in-depth study on the subject is still awaiting. Herein, we attempt to address this issue by creating electrogenic biofilm on modified graphite anodes assembled in an air-cathode MFC. The modification was performed with reduced graphene oxide (rGO), polyaniline (PANI), and carbon nanotube (CNTs) separately. To accelerate the growth of the biofilm, soybean-potato composite (plant) powder was blended with these conductive materials during the fabrication of the anodes. The MFC fabricated with PANI-based anode delivered the current density of 324.2 mA cm-2, followed by CNTs (248.75 mA cm-2), rGO (193 mA cm-2), and blank (without coating) (151 mA cm-2) graphite electrodes. Likewise, the PANI-based anode supported a robust biofilm growth containing maximum bacterial cell densities with diverse shapes and sizes of the cells and broad metabolic functionality. The alpha diversity of the biofilm developed over the anode coated with PANI was the loftiest operational taxonomic unit (2058 OUT) and Shannon index (7.56), as disclosed from the high-throughput 16S rRNA sequence analysis. Further, within these taxonomic units, exoelectrogenic phyla comprising Proteobacteria, Firmicutes, and Bacteroidetes were maximum with their corresponding level (%) 45.5, 36.2, and 9.8. The relative abundance of Gammaproteobacteria, Clostridia, and Bacilli at the class level, while Pseudomonas, Clostridium, Enterococcus, and Bifidobacterium at the genus level were comparatively higher in the PANI-based anode.

Optimization of soil microbial fuel cell for sustainable bio-electricity production: combined effects of electrode material, electrode spacing, and substrate feeding frequency on power generation and microbial community diversity

BACKGROUND

Microbial fuel cells (MFCs) are among the leading research topics in the field of alternative energy sources due to their multifunctional potential. However, their low bio-energy production rate and unstable performance limit their application in the real world. Therefore, optimization is needed to deploy MFCs beyond laboratory-scale experiments. In this study, we investigated the combined influence of electrode material (EM), electrode spacing (ES), and substrate feeding interval (SFI) on microbial community diversity and the electrochemical behavior of a soil MFC (S-MFC) for sustainable bio-electricity generation.

RESULTS

Two EMs (carbon felt (CF) and stainless steel/epoxy/carbon black composite (SEC)) were tested in an S-MFC under three levels of ES (2, 4, and 8 cm) and SFI (4, 6, and 8 days). After 30 days of operation, all MFCs achieved open-circuit voltage in the range of 782 + 12.2 mV regardless of the treatment. However, the maximum power of the SEC-MFC was 3.6 times higher than that of the CF-MFC under the same experimental conditions. The best solution, based on the interactive influence of the two discrete variables, was obtained with SEC at an ES of 4.31 cm and an SFI of 7.4 days during an operating period of 66 days. Analysis of the experimental treatment effects of the variables revealed the order SFI < ES < EM, indicating that EM is the most influential factor affecting the performance of S-MFC. The performance of S-MFC at a given ES value was found to be dependent on the levels of SFI with the SEC electrode, but this interactive influence was found to be insignificant with the CF electrode. The microbial bioinformatic analysis of the samples from the S-MFCs revealed that both electrodes (SEC and CF) supported the robust metabolism of electroactive microbes with similar morphological and compositional characteristics, independent of ES and SFI. The complex microbial community showed significant compositional changes at the anode and cathode over time.

CONCLUSION

This study has demonstrated that the performance of S-MFC depends mainly on the electrode materials and not on the diversity of the constituent microbial communities. The performance of S-MFCs can be improved using electrode materials with pseudocapacitive properties and a larger surface area, instead of using unmodified CF electrodes commonly used in S-MFC systems.

Prospects and trends in bioelectrochemical systems: Transitioning from CO2 towards a low-carbon circular bioeconomy

Resource scarcity and climate change are the most quested topics in view of environmental sustainability. CO2 sequestration through bioelectrochemical systems is an attractive option for fostering bioeconomy development upon several value-added products generation. This review details the state-of-the-art of bioelectrochemical systems for resource recovery from CO2 along with various biocatalysts capable of utilizing CO2. Two bioprocesses (photo-electrosynthesis and chemolithoelectrosynthesis) were discussed projecting their potential for biobased economy development from CO2. Significance of adopting circular strategies for efficient resource recycling, intensifying product value, integrations/interlinking of multiple process chains for the development of circular bioeconomy were discussed. Existing constrains as well as outlook for near establishment of circular bioeconomy from CO2 is presented by weighing fore-sighted plans with current actions. Need for developing CO2-based circular bioeconomy via innovative business models by analyzing social, technical, environmental and product related aspects are also discussed providing a roadmap of gaps to pursue for attaining practicality.

Microbial fingerprints of methanation in a hybrid electric-biological anaerobic digestion

Biomethane as a sustainable, alternative, and carbon-neutral renewable energy source to fossil fuels is highly needed to alleviate the global energy crisis and climate change. The conventional anaerobic digestion (AD) process for biomethane production from waste(water) streams has been widely employed while struggling with a low production rate, low biogas qualities, and frequent instability. The electric-biologically hybrid microbial electrochemical anaerobic digestion system (MEC-AD) prospects more stable and robust biomethane generation, which facilitates complex organic substrates degradation and mediates functional microbial populations by giving a small input power (commonly voltages < 1.0 V), mainly enhancing the communication between electroactive microorganisms and (electro)methanogens. Despite numerous bioreactor tests and studies that have been conducted, based on the MEC-AD systems, the integrated microbial fingerprints, and cooperation, accelerating substrate degradation, and biomethane production, have not been fully summarized. Herein, we present a comprehensive review of this novel developing biotechnology, beginning with the principles of MEC-AD. First, we examine the fundamentals, configurations, classifications, and influential factors of the whole system's performances (reactor types, applied voltages, temperatures, conductive materials, etc.,). Second, extracellular electron transfer either between diverse microbes or between microbes and electrodes for enhanced biomethane production are analyzed. Third, we further conclude (electro)methanogenesis, and microbial interactions, and construct ecological networks of microbial consortia in MEC-AD. Finally, future development and perspectives on MEC-AD for biomethane production are proposed.

Weak electro-stimulation promotes microbial uranium removal: Efficacy and mechanisms

Removal and recovery of uranium from uranium-mine wastewater is beneficial to environmental protection and resource preservation. Reduction of soluble hexavalent U (U(VI)) to insoluble tetravalent uranium (U(IV)) by microbes is a plausible approach for this purpose, but its practical implementation has long been restricted by its intrinsic drawbacks. The electro-stimulated microbial process offers promise in overcoming these drawbacks. However, its applicability in real wastewater has not been evaluated yet, and its U(VI) removal mechanisms remain poorly understood. Herein, we report that introducing a weak electro-stimulation considerably boosted microbial U(VI) removal activities in both synthetic and real wastewater. The U(VI) removal has proceeded via U(VI)-to-U(IV) reduction in the biocathode, and the electrochemical characterization demonstrates the crucial role of the electroactive biofilm. Microbial community analysis shows that the broad biodiversity of the cathode biofilm is capable of U(VI) reduction, and the molecular ecological network indicates that synthetic metabolisms among electroactive and metal-reducing bacteria play major roles in electro-microbial-mediated uranium removal. Metagenomic sequencing elucidates that the electro-stimulated U(VI) bioreduction may proceed via e-pili, extracellular electron shuttles, periplasmic and outer membrane cytochrome, and thioredoxin pathways. These findings reveal the potential and mechanism of the electro-stimulated U(VI) bioreduction system for the treatment of U-bearing wastewater.

Coupled sulfur and electrode-driven autotrophic denitrification for significantly enhanced nitrate removal

Elemental sulfur (S⁰)-based autotrophic denitrification (SAD) has gained intensive attention in the treatment of secondary effluent for its low cost, high efficiency, and good stability. However, in practice, the supplementary addition of limestone is necessary to balance the alkalinity consumption during SAD operation, which increases water hardness and reduces the effective reaction volume. In this study, a coupled sulfur and electrode-driven autotrophic denitrification (SEAD) process was proposed with superior nitrate removal performance, less accumulation of sulfate, and self-balance of acidity-alkalinity capacity by regulating the applied voltage. The dual-channel electron supply from S⁰ and electrodes made the nitrate removal rate constant k in the SEAD process 3.7-5.1 and 1.4-3.5 times higher than that of the single electrode- and sulfur-driven systems, respectively. The S° contributed to 75.3%-83.1% of nitrate removal and the sulfate yield during SEAD (5.67-6.26 mg SO₄^2-/mg NO₃^--N) was decreased by 17%-25% compared with SAD. The S⁰ particle and electrode both as active bio-carriers constructed collaborative denitrification communities and functional genes. Pseudomonas, Ralstonia and Brevundimonas were the dominant denitrifying genera in S⁰ particle biofilm, while Pseudomonas, Chryseobacterium, Pantoea and Comamonas became dominant denitrifying genera in the cathode biofilm. The narG/Z/H/Y/I/V, nxrA/B, napA/B, nirS/K, norB/C and nosZ were potential functional genes for efficient nitrate reduction during the SEAD process. Metagenomic sequencing indicated that S⁰ as an electron donor has greater potential for complete denitrification than the electrode. These findings revealed the potential of SEAD for acting as a highly efficient post denitrification process.

Genomic Analysis of Carbapenem-Resistant Comamonas in Water Matrices: Implications for Public Health and Wastewater Treatments

Comamonas spp. are Gram-negative bacteria that catabolize a wide range of organic and inorganic substrates. Comamonas spp. are abundant in aquatic and soil environments, including wastewater, and can cause opportunistic infections in humans. Because of their potential in wastewater bioaugmentation and bioremediation strategies, the identification of Comamonas species harboring genes encoding carbapenemases and other clinically important antibiotic resistance genes warrant further investigation. Here, we present an analysis of 39 whole-genome sequences comprising three Comamonas species from aquatic environments in South Australia that were recovered on media supplemented with carbapenems. The analysis includes a detailed description of 33 Comamonas denitrificans isolates, some of which carried chromosomally acquired bla_GES-5, bla_OXA, and aminoglycoside resistance (aadA) genes located on putative genomic islands (GIs). All bla_GES-5- and bla_OXA-containing GIs appear to be unique to this Australian collection of C. denitrificans. Notably, most open reading frames (ORFs) within the GIs, including all antimicrobial resistance (AMR) genes, had adjacent attC sites, indicating that these ORFs are mobile gene cassettes. One C. denitrificans isolate carried an IncP-1 plasmid with genes involved in xenobiotic degradation and response to oxidative stress. Our assessment of the sequences highlights the very distant nature of C. denitrificans to the other Comamonas species and its apparent disposition to acquire antimicrobial resistance genes on putative genomic islands. IMPORTANCE Antimicrobial resistance (AMR) poses a global public health threat, and the increase in resistance to "last-resort drugs," such as carbapenems, is alarming. Wastewater has been flagged as a hot spot for AMR evolution. Comamonas spp. are among the most common bacteria in wastewater and play a role in its bioaugmentation. While the ability of Comamonas species to catabolize a wide range of organic and inorganic substrates is well documented, some species are also opportunistic pathogens. However, data regarding AMR in Comamonas spp. are limited. Here, through the genomic analyses of 39 carbapenem-resistant Comamonas isolates, we make several key observations, including the identification of a subset of C. denitrificans isolates that harbored genomic islands encoding carbapenemase bla_GES-5 or extended-spectrum β-lactamase bla_OXA alleles. Given the importance of Comamonas species in potential wastewater bioaugmentation and bioremediation strategies, as well as their status as emerging pathogens, the acquisition of critically important antibiotic resistance genes on genomic islands warrants future monitoring.

Dynamics of a Bacterial Community in the Anode and Cathode of Microbial Fuel Cells under Sulfadiazine Pressure

Microbial fuel cells (MFCs) could achieve the removal of antibiotics and generate power in the meantime, a process in which the bacterial community structure played a key role. Previous work has mainly focused on microbes in the anode, while their role in the cathode was seldomly mentioned. Thus, this study explored the bacterial community of both electrodes in MFCs under sulfadiazine (SDZ) pressure. The results showed that the addition of SDZ had a limited effect on the electrochemical performance, and the maximum output voltage was kept at 0.55 V. As the most abundant phylum, Proteobacteria played an important role in both the anode and cathode. Among them, Geobacter (40.30%) worked for power generation, while Xanthobacter (11.11%), Bradyrhizobium (9.04%), and Achromobacter (7.30%) functioned in SDZ removal. Actinobacteria mainly clustered in the cathode, in which Microbacterium (9.85%) was responsible for SDZ removal. Bacteroidetes, associated with the degradation of SDZ, showed no significant difference between the anode and cathode. Cathodic and part of anodic bacteria could remove SDZ efficiently in MFCs through synergistic interactions and produce metabolites for exoelectrogenic bacteria. The potential hosts of antibiotic resistance genes (ARGs) presented mainly at the anode, while cathodic bacteria might be responsible for ARGs reduction. This work elucidated the role of microorganisms and their synergistic interaction in MFCs and provided a reference to generate power and remove antibiotics using MFCs.

Isolation of Pb(II)-reducing bacteria and demonstration of biological Pb(II) reduction to metallic Pb

Pb(II) contamination imposes serious threats to human health and the environment. Biological reduction of Pb(II) to metallic Pb is an attractive method for the remediation of Pb(II)-contaminated water and sediments. In this study, Pb(II)-reducing microorganisms were isolated by the dilution-to-extinction (DTE) and streak-plate methods. As a result, Delftia acidovorans, Azonexus caeni, and Comamonas testosteroni were successfully isolated. At a high lead concentration (10 mg-Pb(II)/L), each of the isolated D. acidovorans strain Pb11 and A. caeni strain Pb2 cultures showed successful utilization of Pb(II), resulting in a 5.15- and 8.14-fold growth in 3 days, respectively. Pb(II) reduction to metallic Pb by D. acidovorans strain Pb11 and A. caeni strain Pb2 was confirmed using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDS) was coupled with X-ray photoelectron spectroscopy (XPS). This strategic analysis was necessary to confirm the formation of metallic Pb separately from lead phosphate precipitates which are inevitable in the biological Pb(II) removal experiments. Among the 3 isolated microbes, C. testosteroni strain Pb3 did not leave immobile and detectable Pb solids in SEM-EDS analyses. D. acidovorans and A. caeni are recommended for engineered remediation of Pb(II)-contaminated wastewater and sediments.

Inhibition of AHL-mediated quorum sensing to control biofilm thickness in microbial fuel cell by using Rhodococcus sp. BH4

Anode biofilm thickness is a key point for high and sustainable power generation in microbial fuel cells (MFCs). Over time, the formation of a thicker biofilm on anode electrode hinders the power generation performance of MFC by causing a longer electron transfer path and the accumulation of undesirable components in anode biofilm. To overcome these limitations, we used a novel strategy named quorum quenching (QQ) for the first time in order to control the biofilm thickness on the anode surface by inactivation of signal molecules among microorganisms. For this purpose, the isolated QQ bacteria (Rhodococcus sp. BH4) were immobilized into alginate beads (20, 40, and 80 mg/10 ml sodium alginate) and added to the anode chamber of MFCs. The MFC exhibited the best electrochemical activity (1924 mW m^-2) with a biofilm thickness of 26 μm at 40 mg Rhodococcus sp. BH4/10 ml sodium alginate. The inhibition of signal molecules in anode chamber reduced the production of extracellular polymeric substance (EPS) by preventing microbial communication amonganode microorganisms. Microscopic observations revealed that anode biofilm thickness and the abundance of dead bacteria significantly decreased with an increase in Rhodococcus sp. BH4 concentration in MFCs. Microbiome diversity showed an apparent difference among the microbial community structures of anode biofilms in MFCs containing vacant and Rhodococcus sp. BH4 beads. The data revealed that the QQ strategy is an efficient application for improving MFC performance and may shed light on future studies.

Mixotrophic bacteria for environmental detoxification of contaminated waste and wastewater

Mixotrophic bacteria provide a desirable alternative to the use of classical heterotrophic or chemolithoautotrophic bacteria in environmental technology, particularly under limiting nutrients conditions. Their bi-modal ability of adapting to inorganic or organic carbon feed and sulfur, nitrogen, or even heavy metal stress conditions are attractive features to achieve efficient bacterial activity and favorable operation conditions for the environmental detoxification or remediation of contaminated waste and wastewater. This review provides an overview on the state of the art and summarizes the metabolic traits of the most promising and emerging non-model mixotrophic bacteria for the environmental detoxification of contaminated wastewater and waste containing excess amounts of limiting nutrients. Although mixotrophic bacteria usually function with low organic carbon sources, the unusual capabilities of mixotrophic electroactive exoelectrogens and electrotrophs in bioelectrochemical systems and in microbial electrosynthesis for accelerating simultaneous metabolism of inorganic or organic C and N, S or heavy metals are reviewed. The identification of the mixotrophic properties of electroactive bacteria and their capability to drive mono- or bidirectional electron transfer processes are highly exciting and promising aspects. These aspects provide an appealing potential for unearthing new mixotrophic exoelectrogens and electrotrophs, and thus inspire the next generation of microbial electrochemical technology and mixotrophic bacterial metabolic engineering. KEY POINTS: • Mixotrophic bacteria efficiently and simultaneously remove C and N, S or heavy metals. • Exoelectrogens and electrotrophs accelerate metabolism of C and N, S or heavy metals. • New mixotrophic exoelectrogens and electrotrophs should be discovered and exploited.

Microorganisms that participate in biochemical cycles in wetlands

Several biochemical cycles are performed in natural wetlands (NWs) and constructed wetlands (CWs). The knowledge of the microorganisms could be used to monitor the restoration of wetlands or the performance of the wastewater treatment. Regarding bacteria, Proteobacteria phylum is the most abundant in NWs and CWs, which possesses a role in N, P, and S cycles, and in the degradation of organic matter. Other phyla are present in lower abundance. Archaea participate in methanogenesis, methane oxidation, and the methanogenic N2 fixation. Sulfur and phosphorus cycles are also performed by other microorganisms, such as Chloroflexi or Nitrospirae phyla. In general, there is more information about the N cycle, especially nitrification and denitrification. Processes where archaea participate (e.g. methane oxidation, methanogenic N2 fixation) are still unclear their metabolic role and several of these microorganisms have not been isolated so far. The study can use 16S rDNA genes or functional genes. The use of functional genes gives information to monitor specific microbial populations and 16S rDNA is more suitable to perform the taxonomic classification. Also, there are several Candidatus microorganisms, which have not been isolated so far. However, it has been described their metabolic role in the biochemical cycles in wetlands.

Tailoring spatial structure of electroactive biofilm for enhanced activity and direct electron transfer on iron phthalocyanine modified anode in microbial fuel cells

Electroactive biofilm (EAB) has been considered as the core determining electricity generation in microbial fuel cells (MFCs), and its spatial structure regulation for enhanced activity and selectivity is of great concern. In this study, iron phthalocyanine (FePc) was introduced into a carbon cloth (CC) electrode, aiming at improving the affinity between the anode and outer membrane c-type cytochromes (OM c-Cyts) and achieving a highly active EAB. The FePc modified CC anode (FePc-CC) effectively improved the viability of EAB and enriched the Geobacter species up to 44.83% (FePc-CC) from 6.97% (CC). The FePc-CC anode achieved a much higher power density of 2419 mW m^-2 than the CC (560 mW m^-2) and a remarkable higher biomass loading of 2477.2 ± 84.5 μg cm^-2 than the CC (749.3 ± 31.3 μg cm^-2). As the charge transfer resistance was decreased by 58.6 times from 395.2 Ω (CC) to 6.74 Ω (FePc-CC), the interfacial reaction rate was accelerated and the direct electron transfer via OM c-Cyts was promoted. This work provides an effective method to improve the EAB activity by regulating its spatial structure, and opens the door toward the development of highly active EAB using metal phthalocyanines in MFCs.

Enhancing bio-cathodic nitrate removal through anode-cathode polarity inversion together with regulating the anode electroactivity

Bio-cathodic nitrate removal uses autotrophic nitrate-reducing bacteria as catalysts to realize the nitrate removal process and has been considered as a cost-effective way to remove nitrate contamination. However, the present bio-cathodic nitrate removal process has problems with long start-up time and low performance, which are urgently required to improve for its application. In this study, we investigated an anode-cathode polarity inversion method for rapidly cultivating high-performance nitrate-reducing bio-cathode by regulating bio-anodic bio-oxidation electroactivities under different external resistances and explored at the first time the correlation between the oxidation performance and the reduction performance of one mixed-bacteria bioelectrode. A high bio-electrochemical nitrate removal rate of 2.74 ± 0.03 gNO₃^--N m^-2 d^-1 was obtained at the bioelectrode with high bio-anodic bio-oxidation electroactivity, which was 4.0 times that of 0.69 ± 0.03 gNO₃^--N m^-2 d^-1 at the bioelectrode with low bio-oxidation electroactivity, and which was 1.3-7.9 times that of reported (0.35-2.04 gNO₃^--N m^-2 d^-1). 16S rRNA gene sequences and bacterial biomass analysis showed higher bio-cathodic nitrate removal came from higher bacterial biomass of electrogenic bacteria and nitrate-reducing bacteria. A good linear correlation between the bio-cathodic nitrate removal performance and the reversed bio-anodic bio-oxidation electroactivity was presented and likely implied that electrogenic biofilm had either action as autotrophic nitrate reduction or promotion to the development of autotrophic nitrate removal system. This study provided a novel strategy not only to rapidly cultivate high-performance bio-cathode but also to possibly develop the bio-cathode with specific functions for substance synthesis and pollutant detection.

Effect of waterproof breathable membrane based cathodes on performance and biofilm microbiomes in bioelectrochemical systems

A novel method for fabricating air-cathodes was developed by assembling an activated carbon (AC) catalyst together with a waterproof breathable membrane (WBM) and stainless steel mesh (SSM) to reduce manufacturing costs of bioelectrochemical systems (BESs). WBMs made of different materials were tested in the assembly, including a hybrid of polypropylene and polyolefin (PPPO), polyethylene (PE), and polyurethane (PU), and compared against poly tetrafluoroethylene (PTFE)-based cathodes. Results showed that the maximum power density of the activated carbon-stainless steel mesh-polyurethane (AC@SSM/PU) assembly was 2.03 W/m² while that of conventional carbon cloth cathode assembly (Pt@CC/PTFE) was 1.51 W/m². Compared to conventional cathode fabrication, AC@SSM/PU had a much lower cost and simpler manufacturing process. Illumina Miseq sequencing of 16S rRNA gene amplicons indicated that microbiomes were substantially different between anode and cathode biofilms. There was also a difference in the community composition between different cathode biofilms. The predominant population in the anode biofilms was Geobacter (38-75% relative abundance), while Thauera and Pseudomonas dominated the cathode biofilms. The results demonstrated that different types of air-cathodes influenced the microbial community assembly on the electrodes.

Nitric oxide reduction by microbial fuel cell with carbon based gas diffusion cathode for power generation and gas purification

Nitric oxide (NO) from anthropogenic emission is one of the main air contaminants and induces many environmental problems. Microbial fuel cells (MFCs) with gas diffusion cathode provide an alternative technology for NO reduction. In this work, pure NO as the sole electron acceptor of MFCs with gas diffusion cathode (NO-MFCs) was verified. The NO-MFCs obtained a maximum power density of 489 ± 50 mW/m². Compared with MFCs using O₂ in air as electron acceptor (Air-MFCs), the columbic efficiency increased from 23.2% ± 4.3% (Air-MFCs) to 55.7% ± 4.6% (NO-MFCs). The NO removal rate was 12.33 ± 0.14 mg/L/h and N₂ was the main reduction product. Cathode reduction was the dominant pathway of NO conversion in NO-MFCs, including abiotic electrochemical reduction and microbial denitrification process. The predominant genera in anodic microbial community changed from exoelectrogenic bacteria in Air-MFCs to denitrifying bacteria in NO-MFCs and effected the power generation.

Mo2N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

High cost platinum (Pt) catalysts limit the application of microbial electrolysis cells (MECs) for hydrogen (H₂) production. Here, inexpensive and efficient Mo₂N nanobelt cathodes were prepared using an ethanol method with minimized catalyst and binder loadings. The chronopotentiometry tests demonstrated that the Mo₂N nanobelt cathodes had similar catalytic activities for H₂ evolution compared to that of Pt/C (10 wt%). The H₂ production rates (0.39 vs. 0.37 m³-H₂/m³/d), coulombic efficiencies (90% vs. 77%), and overall hydrogen recovery (74% vs. 70%) of MECs with the Mo₂N nanobelt cathodes were also comparable to those with Pt/C cathodes. However, the cost of Mo₂N nanobelt catalyst ($ 31/m²) was much less than that of Pt/C catalysts ($ 1930/m²). Furthermore, the biofilm microbiomes at electrodes were studied using the PacBio sequencing of full-length 16S rRNA gene. It indicated Stenotrophomonas nitritireducens as a putative electroactive bacterium dominating the anode biofilm microbiomes. The majority of dominant species in the Mo₂N and Pt/C cathode communities belonged to Stenotrophomonas nitritireducens, Stenotrophomonas maltophilia, and Comamonas testosterone. The dominant populations in the cathode biofilms were shaped by the cathode materials. This study demonstrated Mo₂N nanobelt catalyst as an alternative to Pt catalyst for H₂ production in MECs.

Bio-electrochemical COD removal for energy-efficient, maximum and robust nitrogen recovery from urine through membrane aerated nitrification

Resource recovery from source-separated urine can shorten nutrient cycles on Earth and is essential in regenerative life support systems for deep-space exploration. In this study, a robust two-stage, energy-efficient, gravity-independent urine treatment system was developed to transform fresh real human urine into a stable nutrient solution. In the first stage, up to 85% of the COD was removed in a microbial electrolysis cell (MEC), converting part of the energy in organic compounds (27-46%) into hydrogen gas and enabling full nitrogen recovery by preventing nitrogen losses through denitrification in the second stage. Besides COD removal, all urea was hydrolysed in the MEC, resulting in a stream rich in ammoniacal nitrogen and alkalinity, and low in COD. This stream was fed into a membrane-aerated biofilm reactor (MABR) in order to convert the volatile and toxic ammoniacal nitrogen to non-volatile nitrate by nitrification. Bio-electrochemical pre-treatment allowed to recover all nitrogen as nitrate in the MABR at a bulk-phase dissolved oxygen level below 0.1 mg O₂ L^-1. In contrast, feeding the MABR directly with raw urine (omitting the first stage), at the same nitrogen loading rate, resulted in nitrogen loss (18%) due to denitrification. The MEC and MABR were characterised by very distinct and diverse microbial communities. While (strictly) anaerobic genera, such as Geobacter (electroactive bacteria), Thiopseudomonas, a Lentimicrobiaceae member, Alcaligenes and Proteiniphilum prevailed in the MEC, the MABR was dominated by aerobic genera, including Nitrosomonas (a known ammonium oxidiser), Moheibacter and Gordonia. The two-stage approach yielded a stable nitrate-rich, COD-low nutrient solution, suitable for plant and microalgae cultivation.

Does electrolysis facilitate simultaneous nitrogen removal and toxicity reduction of low C/N dyeing wastewater by sulfur-based denitrification biofilter?

The concern about wastewater effluent toxicity has motivated the innovation of enhancement technologies on sulfur-based denitrification biofilter in recent years. Electrolysis is a common technology to reduce or remove toxic pollutants. However, the effect of electrolysis on simultaneous total nitrogen (TN) removal and toxicity reduction in sulfur-based denitrification biofilter has not been reported yet. Herein, for the first time, this study investigated the synergistic effects of electrolysis-induced TN removal and toxicity reduction of secondary effluent of dyeing wastewater containing 20 μg/L of nonylphenol (NP), at different carbon to nitrogen ratios (C/N) in several sulfur-based denitrification biofilters. All of the biofilters achieved the denitrification rate of 300.15 g∙N/m³∙d during the stabilization period at C/N = 5. The CSAHD (ceramisite and sulfur as filters) biofilter had highest TN removal rate to achieve the denitrification rate of 257.46 g∙N/m³·d at C/N = 2. Siderite and dolomite both facilitated TN removal efficiency by 9.3%-12.6% under low C/N ratio and acted as the buffer agent in biofilters. Toxicity characteristic leaching procedure (TCLP) test showed that the amount of leached heavy metals was lower than the concentration limit standard of USEPA. Electrolysis did not promote the removal of TN, however, it could reduce NP concentration and increase the biotoxicity relative inhibition rate of effluent by 12.5%-167%, and affect the functional microbial community structure. Our work clarified some misunderstandings about the application of electrolysis-based strengthening technology and enlightened the future development of simultaneous TN removal and toxicity reduction of dyeing wastewater.

Hydrophilic graphene aerogel anodes enhance the performance of microbial electrochemical systems

The hydrophilic three-dimensional (3D) structure of graphene materials was produced with reducing agent-ethylene glycol through hydrothermal reduction. Numerous microorganisms with diverse community structure were established in anode surface, as the hydrophilicity of the graphene anode increased; more populations of Proteobacteria and Firmicutes families were identified in a higher hydrophilic anode. In addition, the start-up time of a microbial fuel cell (MFC) equipped with hydrophilic 3D graphene anode was only 43 h, which is much shorter than traditional 3D graphene-based anode systems. The most hydrophilic anode exhibited the maximal power density of 583.8 W m^-3, 5 times larger than the least hydrophilic one. The content of oxygen in graphene materials improving hydrophilicity would play an important role in enhancing power density. This study proves that hydrophilic 3D graphene materials as the anode can improve MFC performance and start-up time.

Cultivating electroactive microbes-from field to bench

Electromicrobiology is an emerging field investigating and exploiting the interaction of microorganisms with insoluble electron donors or acceptors. Some of the most recently categorized electroactive microorganisms became of interest to sustainable bioengineering practices. However, laboratories worldwide typically maintain electroactive microorganisms on soluble substrates, which often leads to a decrease or loss of the ability to effectively exchange electrons with solid electrode surfaces. In order to develop future sustainable technologies, we cannot rely solely on existing lab-isolates. Therefore, we must develop isolation strategies for environmental strains with electroactive properties superior to strains in culture collections. In this article, we provide an overview of the studies that isolated or enriched electroactive microorganisms from the environment using an anode as the sole electron acceptor (electricity-generating microorganisms) or a cathode as the sole electron donor (electricity-consuming microorganisms). Next, we recommend a selective strategy for the isolation of electroactive microorganisms. Furthermore, we provide a practical guide for setting up electrochemical reactors and highlight crucial electrochemical techniques to determine electroactivity and the mode of electron transfer in novel organisms.

Application of slow-release carbon sources embedded in polymer for stable and extended power generation in microbial fuel cells

Stable and long-term power output is a prerequisite for the application of the energy recovered from microbial fuel cells (MFCs). In this study, a novel fuel supplying strategy based on slow-release carbon embedded in polymer gels was attempted in MFCs aimed to achieve a sustainable power generation. Polymer gels containing starch acetate as the carbon source (40% (w/w)) were prepared, and the effects of its loading dosage on power generation and microbial community structure were investigated. Results showed that the MFCs once fed with 20.0 g/L, 37.5 g/L and 55.0 g/L polymer gels attained a long-term power generation periods of 110, 140 and 170 days, respectively, with a maximum power density of 386-427 mW/m². The MFC with a medium loading dosage (37.5 g/L polymer gels) performed best. MFCs fed with the slow-release carbon enriched a distinct microbial community comparing to the control MFC with acetate as the carbon source, with the genera Geobacter, Sphaerochaeta, Christensenellaceae, Aminiphilus and Proteiniphilum significantly enriched on the anode electrode, and Sphaerochaeta, Proteiniphilum and Bacteroidetes in the anolyte. This carbon source providing method will promote the application of MFCs as a sustainable and stable power source for environmental monitoring and remediation.

Prompt nitrogen removal by controlling the oxygen concentration in sediment microbial fuel cell systems: the electrons allocation and its microbial mechanism

It has been proved that the nitrogen can be removed from the sediment in a sediment microbial fuel cell system (SMFCs), but the competition between nitrate and oxygen for electrons would be a key factor that would affect the removal efficiency, and its mechanism is not clear. Based on organic sediment fuel, an SMFC was constructed, and the influence of dissolved oxygen (DO) on nitrogen transformation and cathodic microbial communities was investigated. The results showed that the best total nitrogen removal efficiency of 60.55% was achieved at DO level of 3 mg/L. High DO concentration affected the removal efficiency through the electrons' competition with nitrate, while low DO concentration suppressed the nitrification. Comamonas, Diaphorobacter and Brevundimonas were the three dominant genera responsible for denitrification at DO concentration of 3 mg/L in this study. The establishment of SMFCs for nitrogen removal by regulating DO level would offer a promising method for sediment treatment.

Performance of different macrophytes in the decontamination of and electricity generation from swine wastewater via an integrated constructed wetland-microbial fuel cell process

Plants constitute a major element of constructed wetlands (CWs). In this study, a coupled system comprising an integrated vertical flow CW (IVCW) and a microbial fuel cell (MFC) for swine wastewater treatment was developed to research the effects of macrophytes commonly employed in CWs, Canna indica, Acorus calamus, and Ipomoea aquatica, on decontamination and electricity production in the system. Because of the different root types and amounts of oxygen released by the roots, the rates of chemical oxygen demand (COD) and ammonium nitrogen (NH₄⁺-N) removal from the swine wastewater differed as well. In the unplanted, Canna indica, Acorus calamus, and Ipomoea aquatica systems, the COD removal rates were 80.20%, 88.07%, 84.70%, and 82.20%, respectively, and the NH₄⁺-N removal rates were 49.96%, 75.02%, 70.25%, and 68.47%, respectively. The decontamination capability of the Canna indica system was better than those of the other systems. The average output voltages were 520±42, 715±20, 660±27, and 752±26mV for the unplanted, Canna indica, Acorus calamus, and Ipomoea aquatica systems, respectively, and the maximum power densities were 0.2230, 0.4136, 0.3614, and 0.4964W/m³, respectively. Ipomoea aquatica had the largest effect on bioelectricity generation promotion. In addition, electrochemically active bacteria, Geobacter and Desulfuromonas, were detected in the anodic biofilm by high-throughput sequencing analysis, and Comamonas (Proteobacteria), which is widely found in MFCs, was also detected in the anodic biofilm. These results confirmed the important role of plants in IVCW-MFCs.

Coupling of electricity generation and denitrification in three-phase single-chamber MFCs in high-salt conditions

High-salt conditions reduce the efficiency of electricity generation and nitrogen removal in microbial fuel cells (MFCs). In this work, we propose a three-phase single-chamber MFC (TP-MFC) by setting up a phase with immobilized cells in a conventional bipolar single-chamber MFC (common MFC). Cells from Halomonas were used as the immobilized phase, because these cells secrete the compatible solute ectoine and exhibit simultaneous nitrification and denitrification (SND). This enhanced the efficiency of SND and subsequent electricity generation under high-salt conditions. The average voltage of TP-MFC generated during the stable period in the presence of 30 g/L NaCl was 439.3 mV, which was 55.2% higher than that generated in common MFC. In addition, the N-removal rate of TP-MFC at 72 h was 63.4%, which was 38.4% higher than that of common MFC. The 16S rRNA diversity analysis showed an improved abundance of Pseudomonas, Acinetobacter, Alcaligenes, and Halomonas in TP-MFC, indicating that the ectoine secreted by immobilized Halomonas conferred substantial salt-tolerance on the electrogenic bacteria growing in a high-salt environment. This paper establishes an efficient and convenient method for improving the salt tolerance of microbial flora in MFCs, which is of great significance for the application of MFCs in high-strength wastewater treatment.

Change of abundance and correlation of Nitrospira inopinata-like comammox and populations in nitrogen cycle during different seasons

Complete-nitrifying bacteria (comammox) play important roles in nitrogen-overloading aquatic systems. However, the understanding of the environmental relevance is still limited. Here, we studied the responses of comammox bacteria (Nitrospira inopinata) in a tributary of the Yellow River, with the water and sediment, microbial, seasonal, and chemical variations considered. Illumina sequencing indicated that the predominant phyla in the river sediment were Proterobacteria, Bacteroidetes, Actinobacteria, and Chloroflex. Quantitative PCR revealed that N. inopinata-like comammox were approximately twice as abundant in the water during the wet season and in the sediment during the dry season than that of other conditions. Significant correlations were found between the abundance of N. inopinata-like comammox and pH (r = 0.58), temperature (r = 0.63), and dissolved oxygen (r = - 0.77). The abundance of N. inopinata-like comammox was higher than that of ammonia oxidizing archaea (AOA), and lower than that of ammonia oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB). Furthermore, a significant correlation was discovered between N. inopinata-like comammox and NOB (r = 0.60), and so was anammox bacteria (r = 0.358). Interestingly, N. inopinata-like comammox also showed positive relationships with denitrifying microbes (r = 0.559).

Suspended anode-type microbial fuel cells for enhanced electricity generation

Electricity generation in microbial fuel cells can be restricted by a few factors, such as the effective area of the anode for biofilm attachment, diffusion limitation of substrates and internal resistance. In this paper, a suspended anode (carbon-based felt granule)-type microbial fuel cell was developed to make full use of the volume of the anode chamber and provide a larger surface area of the anode for the growth of exoelectrogenic bacteria. The current collector was rotated in the anodic chamber to contact with the suspended granules intermittently and achieve better mixing. The open-circuit voltage reached steady state at around 0.83 V. The maximum power density obtained from each scenario increased steadily with the increase in mixing rate. The internal resistance decreased when the rotational rate and the content of the carbon granules were increased. The maximum power density reached 951 ± 14 mW m⁻³ with a corresponding minimum internal resistance of 162.9 ± 3.5 Ω when the mass of carbon granules was 50 g and the rotational rate was 300 rpm. The suspended microbes made negligible contribution to the power density. The microbial fuel cell with a higher content of carbon granules had lower coulombic efficiency and lower relative abundance of exoelectrogenic bacteria.

Suspended anode (carbon-based granules) with intermittent contact by stirring it in an anodic chamber of an MFC to enhance the performance.

Bioenergy generation and simultaneous nitrate and phosphorus removal in a pyrite-based constructed wetland-microbial fuel cell

This study investigates the performance of a pyrite-based constructed wetland-microbial fuel cell (PCW-MFC) in chemical oxygen demand (COD), nitrate (NO₃^--N), total inorganic nitrogen (TIN), and total phosphorus (TP) removal and bioelectricity generation, and explores the mechanisms involved. Four microcosms were used: a constructed wetland (CW), a pyrite-based constructed wetland (PCW), a constructed wetland-microbial fuel cell (CW-MFC), and a PCW-MFC. After 180 days' operation, the PCW-MFC exhibited enhanced simultaneous nitrate and phosphorus removal and bioelectricity output. The maximum COD, NO₃^--N, TIN, and TP removal efficiencies in the PCW-MFC were 71.9%, 70.1%, 63.2%, and 91.2%, respectively, for a hydraulic retention time (HRT) of 6 h. The mean bioelectricity output of the PCW-MFC was 19.0-28.4% higher than that of the CW-MFC. The nitrate removal rate constant of the PCW-MFC was 1.04 d^-1, which is significantly higher than those of the others. Geobacter and sulfate-reducing bacteria were enriched in the PCW-MFC.

Enhancement of the denitrification activity by exoelectrogens in single-chamber air cathode microbial fuel cells

Single-chamber microbial fuel cells (MFCs) can efficiently treat wastewater containing nitrate, probably because the interaction between exoelectrogens and denitrifying bacteria may enhance the denitrification activity of MFCs. In this study, the denitrification of nitrate with a wide range of concentrations was investigated by using single-chamber air cathode MFCs. The maximum average denitrification rate of the MFCs inoculated and operated under closed-circuit conditions (Group N-CC) was up to 12.2 ± 0.6 kg NO₃^--N m^-3 d^-1 at a high nitrate concentration of 2000 mg NO₃-N L^-1, which was 74.3% higher than that of the MFCs inoculated and operated under open-circuit conditions and which was significantly higher than those of other MFC systems and many traditional bioreactors. The high denitrification activity of the MFCs of Group N-CC was attributed to the significant reduction of nitrite accumulation through the possible bioelectrochemical nitrite reduction by exoelectrogens that were only enriched at the anodes of the MFCs of Group N-CC. In addition, the MFCs of Group N-CC showed good stability (over 3.5 years) and low apparent activation energy (34.0 kJ mol^-1) of the denitrification, indicating the good coexistence of exoelectrogens (Geobacter) and denitrifying bacteria (Thauera) with high performance on denitrification during the long-term operation.

Efficient Removal of Metolachlor and Bacterial Community of Biofilm in Bioelectrochemical Reactors

The microbial fuel cell (MFC) provides an inexhaustible electron acceptor to generate current and enhance the degradation of organic compounds. In MFCs with metolachlor as the sole carbon source, the degradation efficiency accelerated by 98%, with 61-76% of enhancement for the degradates, ethane sulfonic acid and oxanilic acid, respectively. According to quantifying primary metabolites of deschloro and metolachlor-2-hydroxyas, dechlorination and alcoholization were deemed as antecedent steps of metolachlor bioelectrochemical degradation. The energy recovery was infeasible by sole addition of metolachlor (at 13 ± 4 °C from equivalent weight of 0.224 mg). In MFCs with metolachlor and sodium acetate as the concomitant carbon sources, the electricity generation recovered to a level comparable to the controls, instead of increasing the removal efficiency of metolachlor. These results suggest that a low-efficiently direct electron transfer occurred between electricigens and metolachlor degraders. The Illumina sequencing showed that species of Paracoccus and Aquamicrobium played a potential degradation effect, while Comamonas sp. replaced Geobacter sp. as the predominant electricigen after addition of metolachlor. This study demonstrates that MFCs could be used as a promising alternative for treatment of chloroacetanilide herbicide contaminated wastewaters by means of a rapidly established active bacterial community. Graphical Abstract .

Shear Stress Affects Biofilm Structure and Consequently Current Generation of Bioanode in Microbial Electrochemical Systems (MESs)

Shear stress is an important factor that affects the formation and structure of anode biofilms, which are strongly related to the extracellular electron transfer phenomena and bioelectric performance of bioanodes. Here, we show that using nitrogen sparging to induce shear stress during anode biofilm formation increases the linear sweep voltammetry peak current density of the mature anode biofilm from 2.37 ± 0.15 to 4.05 ± 0.25 A/m². Electrochemical impedance spectroscopy results revealed that the shear-stress-enriched anode biofilm had a low charge transfer resistance of 46.34 Ω compared to that of the unperturbed enriched anode biofilm (72.2 Ω). Confocal laser scanning microscopy observations showed that the shear-stress-enriched biofilms were entirely viable, whereas the unperturbed enriched anode biofilm consisted of a live outer layer covering a dead inner-core layer. Based on biomass and community analyses, the shear-stress-enriched biofilm had four times the biofilm density (136.0 vs. 27.50 μg DNA/cm³) and twice the relative abundance of Geobacteraceae (over 80 vs. 40%) in comparison with those of the unperturbed enriched anode biofilm. These results show that applying high shear stress during anode biofilm enrichment can result in an entirely viable and dense biofilm with a high relative abundance of exoelectrogens and, consequently, better performance.

Electricity production and the analysis of the anode microbial community in a constructed wetland-microbial fuel cell

The objective of this study is to assess bioelectricity generation, pollutant removal (COD, ammonium, nitrate) and the bacterial communities on anodes in constructed wetlands coupled with microbial fuel cells (CW-MFCs), through feeding the systems with three different types of synthetic wastewater (system 1: normal wastewater; system 2: ammonium-free wastewater; system 3: nitrate-free wastewater). Three CW-MFCs were operated with different wastewater concentrations and hydraulic retention times (HRTs) over a long time period (6 months). The results indicate that the maximum open circuit voltage (775.63 mV) and maximum power density (0.628 W m⁻³) were observed in system 3 (period 3), and that bioenergy production was inhibited in system 2, when feeding with ammonium-free wastewater continuously. COD removal rates in the three systems were similar during each period and ranged from 82.2 ± 6.8% to 98.3 ± 2.2%. Ammonium removal occurred at the air cathode of the CW-MFCs through nitrification, and a higher level of ammonium removal was found in system 1 (period 3) compared with the others. Meanwhile, denitrification occurred at the anaerobic anode of the CW-MFCs, and a large amount of nitrate was removed effectively. The highest nitrate removal rate was 98.8 ± 0.5% in system 2 (period 3). Additionally, four genera related to electricity generation were detected at the anode: Geothrix; Desulfovibrio; Desulfobulbus; and Geobacter. The relative abundances of Desulfovibrio, Desulfobulbus and Geothrix gradually increased during the three periods in system 3, which might be beneficial for bioelectricity generation. Further investigations are needed to optimize the CW-MFC performance and explain the mechanism behind the pollutant degradation and electron motion in the CW-MFCs.

The objective of this study is to assess bioelectricity generation, pollutant removal and the bacterial communities on anodes in constructed wetlands coupled with microbial fuel cells, through feeding the systems with three different types of synthetic wastewater.

Enhancing the Electricity Generation and Nitrate Removal of Microbial Fuel Cells With a Novel Denitrifying Exoelectrogenic Strain EB-1

Microbial fuel cells (MFCs) have been tentatively applied for wastewater treatment, but the presence of nitrogen, especially nitrate, induces performance instability by changing the composition of functional biofilms. A novel denitrifying exoelectrogenic strain EB-1, capable of simultaneous denitrification and electricity generation and affiliated with Mycobacterium sp., was isolated from the anodic biofilm of MFCs fed with nitrate containing medium. Polarization curves and cyclic voltammetry showed that strain EB-1 could generate electricity through a direct electron transfer mechanism with a maximum power density of 0.84 ± 0.05 W m⁻². Additionally, anodic denitrification, as a concurrent metabolism, was demonstrated with an efficient removal rate of 0.66 ± 0.01 kg N m⁻³ d⁻¹ at a COD/N ratio of 3.5 ± 0.3. Importantly, voltage output was not negatively influenced by nitrate, indicating that the concurrent process of nitrate removal and electricity generation was a limitation of the electron donor rather than an inhibition of the system. Furthermore, various organic materials were successfully utilized as anode donors for strain EB-1, and demonstrated the exciting performances in terms of simultaneous denitrification and electricity generation. Mycobacterium sp. EB-1 thus expands the diversity of exoelectrogens and contributes to the potential applications of MFC for simultaneous energy recovery and wastewater treatment.

Enhanced performance and microbial community analysis of bioelectrochemical system integrated with bio-contact oxidation reactor for treatment of wastewater containing azo dye

Feasibility and superiority of the bioelectrochemical system integrated with biocontact oxidation (BES-BCO) for degradation and/or mineralization of azo dyes have been confirmed. In this study, the effects of hydraulic retention time (HRT), applied voltage, and dissolved oxygen (DO) concentration at the bioanode on the performance of BES-BCO and traditional BES were investigated. Using the response surface methodology, the optimum values of HRT, applied voltage, and DO concentration at the bioanode of BES-BCO were investigated to obtain the maximum decolouration and COD removal efficiency and minimum specific energy consumption (SEC). The microbial community structure in BES-BCO was studied for analyzing the change following the introduction of oxygen. The optimised solution was an applied voltage of 0.59V, HRT of 12h, and DO concentration of 0.96mg/L at the bioanode. Under such conditions, the DE, COD removal efficiency, and SEC values were 94.62±0.63%, 89.12±0. 32%, and 687.57±3.86J/g, respectively. In addition, after changing from BES to BES-BCO, the bacterial community structure of the bioanode underwent significant changes. Several aerobic aniline-degrading bacteria and anode-respiration bacteria (ARB) were found to dominate the community of the anode biofilm. The results showed that the removal of azo dye degradation by-products was closely correlated with the o-bioanode and the BCO bacterial community structure.

Cathodic microbial community adaptation to the removal of chlorinated herbicide in soil microbial fuel cells

The microbial fuel cell (MFC) that uses a solid electrode as the inexhaustible electron acceptor is an innovative remediation technology that simultaneously generates bioelectricity. Chlorinated pollutants are better metabolized by reductive dechlorination in proximity to the cathode. Here, the removal efficiency of the herbicide metolachlor (ML) increased by 262 and 176% in soil MFCs that were spiked with 10 (C10) and 20 mg/kg (C20) of ML, respectively, relative to the non-electrode controls. The bioelectricity output of the C10 and C20 increased by over two- and eightfold, respectively, compared to that of the non-ML control, with maximum current densities of 49.6 ± 2.5 (C10) and 78.9 ± 0.6 mA/m² (C20). Based on correlations between ML concentrations and species abundances in the MFCs, it was inferred that Azohydromonas sp., Sphingomonas sp., and Pontibacter sp. play a major role in ML removal around the cathode, with peak removal efficiencies of 56 ± 1% (C10) and 58 ± 1% (C20). Moreover, Clostridium sp., Geobacter sp., Bacillus sp., Romboutsia sp., and Terrisporobacter sp. may be electricigens or closely related microbes due to the significant positive correlation between the bioelectricity generation levels and their abundances around the anode. This study suggests that a directional adaptation of the microbial community has taken place to increase both the removal of chlorinated herbicides around the cathode and the generation of bioelectricity around the anode in bioelectrochemical remediation systems.

Effects of wastewater constituents and operational conditions on the composition and dynamics of anodic microbial communities in bioelectrochemical systems

Over the last decade, there has been an ever-growing interest in bioelectrochemical systems (BES) as a sustainable technology enabling simultaneous wastewater treatment and biological production of, e.g. electricity, hydrogen, and further commodities. A key component of any BES degrading organic matter is the anode where electric current is biologically generated from the oxidation of organic compounds. The performance of BES depends on the interactions of the anodic microbial communities. To optimize the operational parameters and process design of BES a better comprehension of the microbial community dynamics and interactions at the anode is required. This paper reviews the abundance of different microorganisms in anodic biofilms and discusses their roles and possible side reactions with respect to their implications on the performance of BES utilizing wastewaters. The most important operational parameters affecting anodic microbial communities grown with wastewaters are highlighted and guidelines for controlling the composition of microbial communities are given.