Effect of ZnO and TiO2 nanoparticles preilluminated with UVA and UVB light on Escherichia coli and Bacillus subtilis

TRIAD method to assess ecological risks of contaminated soils in abandoned mine sites

Site-specific soil ecological risk assessment is important for protecting soil ecosystems because it reflects the environmental factors at the site to detect ecological risks and develop risk management measures. This study assessed the ecological risks from chemical pollutants in abandoned mine sites using the TRIAD approach, evaluating its overall applicability, including the tiered system of assessment. A site-specific soil ecological risk assessment was conducted for five abandoned mine sites (Sites 1-4 and R, the reference site); integrated risks (IRs) for each site were calculated. Our results of the Tier 2 assessment showed that IRs at Sites 1-4 were 0.701, 0.758, 0.840, and 0.429, respectively. The IR classification was moderate, high, high, and low risk, in that order for Sites 1-4, the same as that for Tier 1. The IR had more varied analyses, emphasizing the significance of conducting higher tiered analyses under TRIAD while maintaining a balance between soil ecosystem protection and socioeconomic costs. Multiple analyses reduced the uncertainty of IR, thus enabling efficient risk management decision-making to protect soil ecosystems. Our study provides a basis for using the TRIAD for soil assessment and establishing policies for site-specific soil ecological risk assessments.

Limits of antibacterial activity of triangular silver nanoplates and photothermal enhancement thereof for Bacillus subtilis

Currently, nanoparticles are being actively explored for antimicrobial applications involving variety of pathogens. Bacillus subtilis is a major concern considering its sporulation and biofilm formation capability which involves high bacteria loadings. Also, there is natural ability of B subtilis to adapt and develop resistance to the silver nanoparticles alone. So, this study reports the limits of antibacterial activity of triangular silver nanoplates (∆AgNPs) and further photothermal enhancement for B. subtilis ATCC 6051 for considerably high bacterial load of 2.5 × 107 to 5 × 108 CFU/ml. Triangular silver nanoplates were synthesized using one pot synthesis method and showed significant photothermal response i.e., ∼36 °C temperature rise on near infrared irradiation as well as photothermal stability. Triangular silver nanoplates alone showed absolute destruction for 2.5 × 107 CFU/ml initial B. subtilis load in 5 min. Whereas, for further higher bacterial loads, the antibacterial efficacy of ∆AgNPs is observed to be insignificant. For higher initial bacterial loads of 5 × 107 CFU/ml and 5 × 108 CFU/ml, photothermally enhanced triangular silver nanoplates resulted in complete destruction of bacteria in about 5 and 10 min, respectively. Antibacterial efficacy and mechanism of the destruction assessed via scanning electron microscopy and LIVE/DEAD assay confirmed morphological deformities. Further the generation of higher levels of reactive oxygen species is also confirmed due to photothermal activation of ∆AgNPs. The study concludes that ∆AgNPs alone are effective only up to bacterial load of 2.5 × 107 CFU/ml. Whereas, for higher bacterial loads of B. subtilis, photothermally activated ∆AgNPs lead to irreversible damage due to multiple targeting mechanisms leading to absolute elimination in short span of 5-10 min for the chosen irradiation conditions. Ultimately, this study demonstrates photothermally enhanced silver nanoplates as a potential antimicrobial agent for considerably high bacterial loads of B. subtilis. Overall, the broader window of considered high bacterial loadings and its irradiation by this technique shows the full-proof nature of photothermal applications for scenarios involving high cell density such as biofilms and wound infections etc. Further, the concept may be useful for sterilization or decontamination of samples, devices, etc. because B. subtilis and its spores are the challenges during sterilization.

Characterization of oxidative damage induced by nanoparticles via mechanism-driven machine learning approaches

The wide application of TiO₂-based engineered nanoparticles (nTiO₂) inevitably led to release into aquatic ecosystems. Importantly, increasing studies have emphasized the high risks of nTiO₂ to coastal environments. Bivalves, the representative benthic filter feeders in coastal zones, acted as important roles to assess and monitor the toxic effects of nanoparticles. Oxidative damage was one of the main toxic mechanisms of nTiO₂ on bivalves, but the experimental variables/nanomaterial characteristics were diverse and the toxicity mechanism was complex. Therefore, it was very necessary to develop machine learning model to characterize and predict the potential toxicity. In this study, thirty-six machine learning models were built by nanodescriptors combined with six machine learning algorithms. Among them, random forest (RF) - catalase (CAT), k-neighbors classifier (KNN) - glutathione peroxidase (GPx), neural networks - multilayer perceptron (ANN) - glutathione s-transferase (GST), random forest (RF) - malondialdehyde (MDA), random forest (RF) - reactive oxygen species (ROS), and extreme gradient boosting decision tree (XGB) - superoxide dismutase (SOD) models performed good with high accuracy and balanced accuracy for both training sets and external validation sets. Furthermore, the best model revealed the predominant factors (exposure concentration, exposure periods, and exposure matrix) influencing the oxidative stress induced by nTiO₂. These results showed that high exposure concentrations and short exposure-intervals tended to cause oxidative damage to bivalves. In addition, gills and digestive glands could be vulnerable to nTiO₂-induced oxidative damage as tissues/organs differences were the important factors controlling MDA activity. This study provided insights into important nano-features responsible for the different indicators of oxidative stress and thereby extended the application of machine learning approaches in toxicological assessment for nanoparticles.

Nanomaterial-Based Antimicrobial Coating for Biomedical Implants: New Age Solution for Biofilm-Associated Infections

Recently, the upsurge in hospital-acquired diseases has put global health at risk. Biomedical implants being the primary source of contamination, the development of biomedical implants with antimicrobial coatings has attracted the attention of a large group of researchers from around the globe. Bacteria develops biofilms on the surface of implants, making it challenging to eradicate them with the standard approach of administering antibiotics. A further issue of current concern is the fast resurgence of resistance to conventional antibiotics. As nanotechnology continues to advance, various types of nanomaterials have been created, including 2D nanoparticles and metal and metal oxide nanoparticles with antimicrobial properties. Researchers from all over the world are using these materials as a coating agent for biomedical implants to create an antimicrobial environment. This comprehensive and contemporary review summarizes various metals, metal oxide nanoparticles, 2D nanomaterials, and their composites that have been used or may be used in the future as an antimicrobial coating agent for biomedical implants, as well as their succinct mode of action to combat biofilm-associated infection and diseases.

Exploring the Physicochemical, Mechanical, and Photocatalytic Antibacterial Properties of a Methacrylate-Based Dental Material Loaded with ZnO Nanoparticles

While resin-based materials meet the many requirements of a restorative material, they lack adequate, long-lasting antimicrobial power. This study investigated a zinc oxide nanoparticle (ZnO NP)-loaded resin-blend (RB) toward a new antimicrobial photodynamic therapy (aPDT)-based approach for managing dental caries. The results confirmed that up to 20 wt% ZnO NPs could be added without compromising the degree of conversion (DC) of the original blend. The DC achieved for the 20 wt% ZnO NP blend has been the highest reported. The effects on flexural strength (FS), shear bond strength to dentin (SBS), water sorption (WS), solubility (SL), and viability of Streptococcus mutans under 1.35 J/cm2 blue light or dark conditions were limited to ≤20 wt% ZnO NP loading. The addition of up to 20 wt% ZnO NPs had a minimal impact on FS or SBS, while a reduction in the bacteria count was observed. The maximum loading resulted in an increase in SL. Furthermore, 28-day aging in 37 °C water increased the FS for all groups, while it sustained the reduction in bacteria count for the 20 wt% resin blends. Overall, the ZnO NP-loaded resin-based restorative material presents significant potential for use in aPDT.

Site-specific ecological risk assessment of metal-contaminated soils based on the TRIAD approach

Ecological risk assessment based on scientific data is crucial for understanding causal relationships between chemical pollution and environmental risks. Simultaneously, a balance is required between socioeconomic factors and scientific evidence. The TRIAD approach, which incorporates three lines of evidence (LoE)-chemical (Chem-LoE), ecotoxicological (Ecotox-LoE), and ecological (Eco-LoE)-was applied in five sites of an abandoned mine for site-specific soil ecological risk assessment (SERA). In combination, the three LoEs showed that two sites had extremely high risks, one site had moderate risk, and the other site had low risk. At all sites, Chem-LoE exhibited high-integrated risk values. In Ecotox-LoE and Eco-LoE, some species were not affected despite high metal concentrations in the soil samples collected from the sites, indicating that the bioavailability of metals differed according to the physiochemical properties of the soil medium. This study is significant as multiple analyses were performed considering ecosystem structure to reduce uncertainty in SERA. The results provide information to support effective decision-making risk management to protect the soil ecosystem. Moreover, these findings will be useful in establishing policies and priorities for soil risk management.

On the incorporation of nano TiO2to inhibit concrete deterioration in the marine environment

To develop high deterioration resistance concrete for marine infrastructures, two types of nano TiO₂(NT) including anatase phase NT and silica surface-treated rutile phase NT were incorporated into concrete. The fabricated NT modified concrete was then put into the marine environment for 21 months in this study. The effects and mechanisms of two types of NT on the deterioration of concrete in the marine environment were investigated from three aspects, including seawater physical and biological as well as chemical actions on concrete with NT. Under the seawater physical action, the exposed degree of coarse sand particles on the surface of control concrete is greater than that of concrete with NT. Owing to the microorganism biodegradation property of NT, the elimination and inhibition rates of concrete with NT on microorganisms can reach up to 76.98% and 96.81%, respectively. In addition, the surface biofilm thickness of concrete can be reduced by 49.13% due to the inclusion of NT. In the aspect of seawater chemical action, NT can increase the pH value inside concrete by 0.81, increase the degree of polymerization of C-S-H gel, and improve the interfacial transition zone between cement paste and aggregate in concrete. Compared to anatase phase NT, silica surface-treated rutile phase NT is more effective in improving the deterioration resistance of concrete in the marine environment. It can be concluded that incorporating NT can inhibit the deterioration of concrete in the marine environment.

Evidence that nano-TiO2 induces acute cytotoxicity to the agronomically beneficial nitrogen-fixing bacteria Sinorhizobium meliloti

When nano-sized titanium dioxide (nano-TiO2) absorbs ultra-violet (UV-A) radiation, it produces reactive oxygen species that can be toxic to bacteria. We used the agronomically beneficial nitrogen-fixing bacterium Sinorhizobium meliloti strain 1021 as a model microorganism to detect nano-TiO2 toxicity. Sinorhizobium meliloti was exposed to aqueous dispersions of micrometer-sized TiO2 (micron-TiO2, 44 μm) or nanometer-sized TiO2 (nano-TiO2, 21 nm) at nominal concentrations of 0, 100, 300, 600, 900, and 1800 mg TiO2/L. There were fewer viable S. meliloti cells after exposure to nano-TiO2 under dark and UV-A light conditions. Nano-TiO2 was more toxic to S. meliloti with UV-A irradiation (100% mortality at 100 mg TiO2/L) than under dark conditions (100% mortality at 900 mg TiO2/L). Micron-TiO2 concentrations less than 300 mg TiO2/L had no effect on S. meliloti viability under dark or UV-A light conditions. Exposure to 600 mg/L or more of micron-TiO2 under UV-A light could also photo-kill S. meliloti cells (100% mortality). Further studies are needed to ascertain whether nano-TiO2 interferes with the growth of N2-fixing microorganisms in realistic agricultural environments.

Exogenous application of ZnO nanoparticles and ZnSO4 distinctly influence the metabolic response in Phaseolus vulgaris L

Nanomaterials-mediated contamination (including the highly reactive metal oxides ZnO nanoparticles) is becoming one of the most concerning issues worldwide. In this study, the toxic effects of two chemical species of Zn (ZnO nanoparticles and bulk ZnSO₄) were investigated in bean plants, following either foliar or soil application, at concentrations from 250 to 2000 mg L^-1 using biochemical assays, proteomics and metabolomics. The accumulation of Zn in plant tissues depended on the application type, zinc chemical form and concentration, in turn triggering distinctive morphological, physiological, and redox responses. Bean plants were more sensitive to the foliar than to the soil application, and high concentrations of ZnO NP and bulk ZnSO₄ determined the highest plant growth inhibition and stress symptoms. However, low dosages of ZnSO₄ induced a slight plant growth promotion and better physiological and antioxidative response. Low concentration of Zn leaded to increased activity of stress-related proteins and secondary metabolites with antioxidant capacity, while increasing concentration reached the exhausted phase of the plant stress response, reducing the antioxidant defense system. Such high concentrations increased lipids peroxidation, protein degradation and membranes integrity. Oxidative damage occurred at high concentrations of both chemical species of Zn. Foliar spraying impaired photosynthetic efficiency, while soil applications (especially ZnSO₄) elicited antioxidant metabolites and proteins, and impaired chloroplast-related proteins involved in the electron transport chain and ATP production. Taken together, the results highlighted distinctive and nanoparticles-related toxic effects of ZnO in bean, compared to ionic forms of Zn.

Biomedical Applications of Reactive Oxygen Species Generation by Metal Nanoparticles

The design, synthesis and characterization of new nanomaterials represents one of the most dynamic and transversal aspects of nanotechnology applications in the biomedical field. New synthetic and engineering improvements allow the design of a wide range of biocompatible nanostructured materials (NSMs) and nanoparticles (NPs) which, with or without additional chemical and/or biomolecular surface modifications, are more frequently employed in applications for successful diagnostic, drug delivery and therapeutic procedures. Metal-based nanoparticles (MNPs) including metal NPs, metal oxide NPs, quantum dots (QDs) and magnetic NPs, thanks to their physical and chemical properties have gained much traction for their functional use in biomedicine. In this review it is highlighted how the generation of reactive oxygen species (ROS), which in many respects could be considered a negative aspect of the interaction of MNPs with biological matter, may be a surprising nanotechnology weapon. From the exchange of knowledge between branches such as materials science, nanotechnology, engineering, biochemistry and medicine, researchers and clinicians are setting and standardizing treatments by tuning ROS production to induce cancer or microbial cell death.

Effects of heavy metals and metal (oxide) nanoparticles on enhanced biological phosphorus removal

With the rapid growth of economics and nanotechnology, a significant portion of the anthropogenic emissions of heavy metals and nanoparticles (NPs) enters wastewater streams and discharges to wastewater treatment plants, thereby potentially posing a risk to the bacteria that facilitate the successful operation of the enhanced biological phosphorus (P) removal (EBPR) process. Although some efforts have been made to obtain detailed insights into the effects of heavy metals and metal (oxide) nanoparticles [Me(O)NPs], many unanswered questions remain. One question is whether the toxicity of Me(O)NPs originates from the released metal ions. This review aims to holistically evaluate the effects of heavy metals and Me(O)NPs. The interactions among extracellular polymeric substances, P, and heavy metals [Me(O)NPs] are presented and discussed for the first time. The potential mechanisms of the toxicity of heavy metals [Me(O)NPs] are summarized. Additionally, mathematical models of the toxicity and removal of P, heavy metals, and Me(O)NPs are overviewed. Finally, knowledge gaps and opportunities for further study are discussed to pave the way for fully understanding the inhibition of heavy metals [Me(O)NPs] and for reducing their inhibitory effect to maximize the reliability of the EBPR process.

Determination of hazardous concentrations of 2,4-dinitrophenol in freshwater ecosystems based on species sensitivity distributions

2,4-dinitrophenol (2,4-DNP) is a phenolic compound used as a wood preservative or pesticide. The chemical is hazardous to freshwater organisms. Although 2,4-DNP poses ecological risks, only a few of its aquatic environmental risks have been investigated and very limited guidelines for freshwater aquatic ecosystems have been established by governments. This study addresses the paucity of 2,4-DNP toxicity data for freshwater ecosystems and the current lack of highly reliable trigger values for this highly toxic compound. We conducted acute bioassays using 12 species from nine taxonomic groups and chronic assays using five species from four taxonomic groups to improve the quality of the dataset and enable the estimation of protective concentrations based on species sensitivity distributions. The acute and hazardous concentrations of 2,4-DNP in 5% of freshwater aquatic species (HC₅) were determined to be 0.91 (0.32-2.65) mg/L and 0.22 (0.11-0.42) mg/L, respectively. To the best of our knowledge, this is the first report of a suggested chronic HC₅ for 2,4-DNP and it provides the much-needed fundamental data for the risk assessment and management of freshwater ecosystems.

"Tailoring the TiO2 phases through microwave-assisted hydrothermal synthesis: Comparative assessment of bactericidal activity"

Nanocrystalline titania (TiO₂) is one of the most investigated crystalline nanostructured systems in the field of materials science. The technological applications of this material are related to its optoelectronic and photocatalytic properties, which in turn are strongly dependent on the crystal phase (i.e., anatase, brookite, and rutile), particle size, and surface structure. However, systematic comparative studies of all its crystal phases are scarce in literature due to difficulties in providing a controlled synthesis, which is primarily important in obtaining the brookite phase. In this report, the synthesis of TiO₂ nanoparticles in the anatase, brookite, and rutile structures was explored, using amorphous TiO₂ as a common precursor under microwave-assisted hydrothermal conditions. The influence of parameters such as temperature, acidity, and precursor concentration on phase crystallization were investigated. The TiO₂ materials (amorphous and crystalline phases as well as commercial Degussa P25) were systematically characterized using Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, UV-visible reflectance spectroscopy, and dynamic and electrophoretic light scattering. The bactericidal activity and photocatalytic antibacterial effectiveness of each material were evaluated through the determination of the minimum inhibitory and bactericidal concentrations, and via the mortality kinetic method under ultraviolet (UV) illumination under similar conditions with two bacterial groups of unique cellular structures: Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). The results are discussed with particular emphasis on the relationship between the synthesis parameters (acidity, precursor concentration, temperature and reaction time) and the bactericidal properties.

Orthophosphate modulates the phytotoxicity of nano-ZnO to Lemna minor (L.)

Because of their applications in large numbers of products, Zinc Oxide nanoparticles (nano-ZnO) will inevitably enter into the environment. Nano-ZnO released into the environment will be present in a complex matrix which can cause various chemical and physical transformations and modulate the biological reactivity of these particles. Due to their rapid growth and small size, Lemna minor is recommended by OECD for toxicological testing. Here, we tested how nano-ZnO reactivity is modulated by the suite of macro- and micronutrients that are present in Lemna minor growth media. Specifically, we measured ex situ Reactive Oxygen Species (ROS) formation by nano-ZnO, and subsequent in planta toxicity. The data show how orthophosphate can modulate both ex situ ROS formation, and in planta toxicity. This has ramifications for phytotoxicity testing, which is commonly performed under controlled conditions and on media containing orthophosphate.

Antibacterial potential associated with drug-delivery built TiO2 nanotubes in biomedical implants

The fast evolution of surface treatments for biomedical implants and the concern with their contact with cells and microorganisms at early phases of bone healing has boosted the development of surface topographies presenting drug delivery potential for, among other features, bacterial growth inhibition without impairing cell adhesion. A diverse set of metal ions and nanoparticles (NPs) present antibacterial properties of their own, which can be applied to improve the implant local response to contamination. Considering the promising combination of nanostructured surfaces with antibacterial materials, this critical review describes a variety of antibacterial effects attributed to specific metals, ions and their combinations. Also, it explains the TiO2 nanotubes (TNTs) surface creation, in which the possibility of aggregation of an active drug delivery system is applicable. Also, we discuss the pertinent literature related to the state of the art of drug incorporation of NPs with antibacterial properties inside TNTs, along with the promising future perspectives of in situ drug delivery systems aggregated to biomedical implants.

Preparation, characterisation and in vitro antibacterial property of ciprofloxacin-loaded nanostructured lipid carrier for treatment of Bacillus subtilis infection

Context: In this study, controlled ciprofloxacin (CIPRO) nanostrustructured lipid carriers of Precirol^® ATO 5/Transcutol^® HP (batch A) and tallow fat/Transcutol^® HP (batch B) was carreid out. Objective: The aim was to improve solubility and bioavailability of CIPRO. Objective: Study of controlled ciprofloxacin (CIPRO) nanostructured lipid carriers of Precirol^® ATO 5/Transcutol^® HP (batch A) and tallow fat/Transcutol^® HP (batch B). Methods: CIPRO concentrations C_1-5 (0.0, 0.2, 0.5, 0.8, and 1.0% w/w) as AC_1-5 and BC_1-5 were prepared by hot homogenisation and characterised by zetasizer, differential scanning calorimetry, Fourier transform infra-red spectroscopy, in vitro drug release and growth inhibitory zone diameter (IZD) on agar-seeded Bacillus subtilis. Results: AC₅ achieved polydispersed particles of ∼605 nm, 92% encapsulation efficiency (EE) and -28 mV similar to BC₅ (∼789 nm, 91% EE, and -31 mV). Crystallinity indices (AC₅ and BC₅) were low at 3 and 5%, respectively. CIPRO release in AC₅ was ∼98% in SGF (pH 1.2) and BC₅ similarly ∼98% in SIF (pH 6.8). Conclusions: AC₅ had superior growth inhibition of B. subtilis at lower concentration (1.2 µg/mL) than BC₅ and CIPRO controls; hence could serve as possible sustained delivery system of CIPRO.

Nanotoxicity of engineered nanomaterials (ENMs) to environmentally relevant beneficial soil bacteria - a critical review

Deposition of engineered nanomaterials (ENMs) in various environmental compartments is projected to continue rising exponentially. Terrestrial environments are expected to be the largest repository for environmentally released ENMs. Because ENMs are enriched in biosolids during wastewater treatment, agriculturally applied biosolids facilitate ENM exposure of key soil micro-organisms, such as plant growth-promoting rhizobacteria (PGPR). The ecological ramifications of increasing levels of ENM exposure of terrestrial micro-organisms are not clearly understood, but a growing body of research has investigated the toxicity of ENMs to various soil bacteria using a myriad of toxicity end-points and experimental procedures. This review explores what is known regarding ENM toxicity to important soil bacteria, with a focus on ENMs which are expected to accumulate in terrestrial ecosystems at the highest concentrations and pose the greatest potential threat to soil micro-organisms having potential indirect detrimental effects on plant growth. Knowledge gaps in the fundamental understanding of nanotoxicity to bacteria are identified, including the role of physicochemical properties of ENMs in toxicity responses, particularly in agriculturally relevant micro-organisms. Strategies for improving the impact of future research through the implementation of in-depth ENM characterization and use of necessary experimental controls are proposed. The future of nanotoxicological research employing microbial ecoreceptors is also explored, highlighting the need for continued research utilizing bacterial isolates while concurrently expanding efforts to study ENM-bacteria interactions in more complex environmentally relevant media, e.g. soil. Additionally, the particular importance of future work to extensively examine nanotoxicity in the context of bacterial ecosystem function, especially of plant growth-promoting agents, is proposed.

Impact of nanoparticles on transcriptional regulation of catabolic genes of petroleum hydrocarbon-degrading bacteria in contaminated soil microcosms

This study was conducted to determine what effects nanoparticles (NPs) like TiO₂ , ZnO, and Ag may pose on natural attenuation processes of petroleum hydrocarbons in contaminated soils. The solid NPs used were identified using x-ray diffraction technique and their average size was certified as 18.2, 16.9, and 18.3 nm for Ag-NPs, ZnO-NPs, and TiO₂ -NPs, respectively. NPs in soil microcosms behave differently where it was dissolved as in case of Ag-NPs, partially dissolved as in ZnO-NPs or changed into other crystalline phase as in TiO₂ -NPs. In this investigation, catabolic gene encoding catechol 2,3 dioxygenase (C23DO) was selected specifically as biomarker for monitoring hydrocarbon biodegradation potential by measuring its transcripts by RT-qPCR. TiO₂ -NPs amended microcosms showed almost no change in C23DO expression profile or bacterial community which were dominated by Bacillus sp., Mycobacterium sp., Microbacterium sp., Clostridium sp., beside uncultured bacteria, including uncultured proteobacteria, Thauera sp. and Clostridia. XRD pattern suggested that TiO₂ -NPs in microcosms were changed into other non-inhibitory crystalline phase, consequently, showing the maximum degradation profile for most low molecular weight oil fractions and partially for the high molecular weight ones. Increasing ZnO-NPs concentration in microcosms resulted in a reduction in the expression of C23DO with a concomitant slight deteriorative effect on bacterial populations ending up with elimination of Clostridium sp., Thauera sp., and uncultured proteobacteria. The oil-degradation efficiency was reduced compared to TiO₂ -NPs amended microcosms. In microcosms, Ag-NPs were not detected in the crystalline form but were available in the ionic form that inhibited most bacterial populations and resulted in a limited degradation profile of oil, specifically the low molecular weight fractions. Ag-NPs amended microcosms showed a significant reduction (80%) in C23DO gene expression and a detrimental effect on bacterial populations including key players like Mycobacterium sp., Microbacterium sp., and Thauera sp. involved in the biodegradation of petroleum hydrocarbons.

Nanoparticles of Titanium and Zinc Oxides as Novel Agents in Tumor Treatment: a Review

Cancer has become a global problem. On all continents, a great number of people are diagnosed with this disease. In spite of the progress in medical care, cancer still ends fatal for a great number of the ill, either as a result of a late diagnosis or due to inefficiency of therapies. The majority of the tumors are resistant to drugs. Thus, the search for new, more effective therapy methods continues. Recently, nanotechnology has been attributed with big expectations in respect of the cancer fight. That interdisciplinary field of science creates nanomaterials (NMs) and nanoparticles (NPs) that can be applied, e.g., in nanomedicine. NMs and NPs are perceived as very promising in cancer therapy since they can perform as drug carriers, as well as photo- or sonosensitizers (compounds that generate the formation of reactive oxygen species as a result of either electromagnetic radiation excitation with an adequate wavelength or ultrasound activation, respectively). Consequently, two new treatment modalities, the photodynamic therapy (PDT) and the sonodynamic therapy (SDT) have been created. The attachment of ligands or antibodies to NMs or to NPs improve their selective distribution into the targeted organ or cell; hence, the therapy effectiveness can be improved. An important advantage of the targeted tumor treatment is lowering the cyto- and genotoxicity of active substance towards healthy cells. Therefore, both PDT and SDT constitute a valuable alternative to chemo- or radiotherapy. The vital role in cancer eradication is attributed to two inorganic sensitizers in their nanosized scale: titanium dioxide and zinc oxide.

Genotoxicity of metal based engineered nanoparticles in aquatic organisms: A review

Engineered nanoparticles (ENPs) are an emerging class of environmental contaminants, but are generally found in very low concentrations and are therefore likely to exert sub-lethal effects on aquatic organisms. In this review, we: (i) highlight key mechanisms of metal-based ENP-induced genotoxicity, (ii) identify key nanoparticle and environmental factors which influence the observed genotoxic effects, and (iii) highlight the challenges involved in interpreting reported data and provide recommendations on how these challenges might be addressed. We review the application of eight different genotoxicity assays, where the Comet Assay is generally preferred due to its capacity to detect low levels of DNA damage. Most ENPs have been shown to cause genotoxic responses; e.g., DNA or/and chromosomal fragmentation, or DNA strand breakage, but at unrealistic high concentrations. The genotoxicity of the ENPs was dependent on the inherent physico-chemical properties (e.g. size, coating, surface chemistry, e.tc.), and the presence of co-pollutants. To enhance the value of published genotoxicity data, the role of environmental processes; e.g., dissolution, aggregation and agglomeration, and adsorption of ENPs when released in aquatic systems, should be included, and assay protocols must be standardized. Such data could be used to model ENP genotoxicity processes in open environmental systems.

Comparative cytotoxicity of nanoparticles and ions to Escherichia coli in binary mixtures

The objective of this study was to understand toxicity of mixture of nanoparticles (NPs) (ZnO and TiO₂) and their ions to Escherichia coli. Results indicated the decrease in percentage growth of E. coli with the increase in concentration of NPs both in single and mixture setups. Even a small concentration of 1mg/L was observed to be significantly toxic to E. coli in binary mixture setup (exposure concentration: 1mg/L ZnO and 1mg/L TiO₂; 21.15% decrease in plate count concentration with respect to control). Exposure of E. coli to mixture of NPs at 1000mg/L (i.e., 1000mg/L ZnO and 1000mg/L TiO₂) resulted in 99.63% decrease in plate count concentration with respect to control. Toxic effects of ions to E. coli were found to be lesser than their corresponding NPs. The percentage growth reduction was found to be 36% for binary mixture of zinc and titanium ions at the highest concentration (i.e., 803.0mg/L Zn and 593.3mg/L Ti where ion concentrations are equal to the Zn ions present in 1000mg/L ZnO NP solution and Ti⁺⁴ ions present in 1000mg/L TiO₂ NP solution). Nature of mixture toxicity of the two NPs to E. coli was found to be antagonistic. The alkaline phosphatase (Alp) assay indicated that the maximum damage was observed when E. coli was exposed to 1000mg/L of mixture of NPs. This study tries to fill the knowledge gap on information of toxicity of mixture of NPs to bacteria which has not been reported earlier.

Accelerated ecotoxicity of photoreactive nanoparticles on Moina macrocopa

Zinc oxide nanoparticles (ZnO NPs) and titanium dioxide nanoparticles (TiO₂ NPs) are well known as photoreactive nanoparticles (NPs). Various phototoxicities of ZnO NPs and TiO₂ NPs were reported on several organisms. It was still necessary to evaluate the toxicity of photoreactive ZnO NPs and TiO₂ NPs due to species-specific effects under various irradiation conditions. We compared the acute toxicity of Moina macrocopa under visible, ultraviolet (UV) A, and B irradiations, according to the Organization for Economic Cooperation and Development guidelines for the testing of chemicals (Test No. 202). The sensitivity of ZnO NPs for M. macrocopa was UVB>UVA>visible light irradiation. There were no significant lethal and immobile effects of TiO₂ NPs on juveniles under all irradiations and in the tested concentrations of TiO₂ NPs. Photoreactive NPs have a potential and accelerated toxicity on organisms in the ambient environments.

A mechanistic study of TiO2 nanoparticle toxicity on Shewanella oneidensis MR-1 with UV-containing simulated solar irradiation: Bacterial growth, riboflavin secretion, and gene expression

Toxicity of nanomaterials to ecological systems has recently emerged as an important field of research, and thus, many researchers are exploring the mechanisms of how nanoparticles impact organisms. Herein, we probe the mechanisms of bacteria-nanoparticle interaction by investigating how TiO₂ nanoparticles impact a model organism, the metal-reducing bacterium Shewanella oneidensis MR-1. In addition to examining the effect of TiO₂ exposure, the effect of synergistic simulated solar irradiation containing UV was explored in this study, as TiO₂ nanoparticles are known photocatalysts. The data reveal that TiO₂ nanoparticles cause an inhibition of S. oneidensis growth at high dosage without compromising cell viability, yet co-exposure of nanoparticles and illumination does not increase the adverse effects on bacterial growth relative to TiO₂ alone. Measurements of intracellular reactive oxygen species and riboflavin secretion, on the same nanoparticle-exposed bacteria, reveal that TiO₂ nanoparticles have no effect on these cell functions, but application of UV-containing illumination with TiO₂ nanoparticles has an impact on the level of riboflavin outside bacterial cells. Finally, gene expression studies were employed to explore how cells respond to TiO₂ nanoparticles and illumination, and these results were correlated with cell growth and cell function assessment. Together these data suggest a minimal impact of TiO₂ NPs and simulated solar irradiation containing UV on S. oneidensis MR-1, and the minimal impact could be accounted for by the nutrient-rich medium used in this work. These measurements demonstrate a comprehensive scheme combining various analytical tools to enable a mechanistic understanding of nanoparticle-cell interactions and to evaluate the potential adverse effects of nanoparticles beyond viability/growth considerations.

Physiological and biochemical response of plants to engineered NMs: Implications on future design

Engineered nanomaterials (ENMs) form the basis of a great number of commodities that are used in several areas including energy, coatings, electronics, medicine, chemicals and catalysts, among others. In addition, these materials are being explored for agricultural purposes. For this reason, the amount of ENMs present as nanowaste has significantly increased in the last few years, and it is expected that ENMs levels in the environment will increase even more in the future. Because plants form the basis of the food chain, they may also function as a point-of-entry of ENMs for other living systems. Understanding the interactions of ENMs with the plant system and their role in their potential accumulation in the food chain will provide knowledge that may serve as a decision-making framework for the future design of ENMs. The purpose of this paper was to provide an overview of the current knowledge on the transport and uptake of selected ENMs, including Carbon Based Nanomaterials (CBNMs) in plants, and the implication on plant exposure in terms of the effects at the macro, micro, and molecular level. We also discuss the interaction of ENMs with soil microorganisms. With this information, we suggest some directions on future design and areas where research needs to be strengthened. We also discuss the need for finding models that can predict the behavior of ENMs based on their chemical and thermodynamic nature, in that few efforts have been made within this context.

Assessing the toxicity and the dissolution rate of zinc oxide nanoparticles using a dual-color Escherichia coli whole-cell bioreporter

Particle toxicity and metal ions from the dissolution of metallic nanoparticles (NPs) can have environmentally toxic effects. Among the diverse metallic NPs, four types of zinc oxide NPs (ZnO-NPs)-two spherical (diameters <50 nm and <100 nm) and two wire (50 nm × 300 nm and 90 nm × 1000 nm) shaped-were examined using dual-color whole-cell bioreporters (WCBs) to elucidate the relationships among size, shape, and toxicity. The amount of Zn(II) ions dissolved from NPs was determined by measuring mCherry expression because the presence of Zn(II) ions induced the expression of mCherry from pZnt-mCherry in dual-color WCBs. The overall toxic effects were assessed by measuring Escherichia coli cell growth. The toxic effect on cell growth was determined by measuring the expression of eGFP from the dual-color WCBs to avoid interferences in the signal acquisition caused by inseparable NPs. The novel approach demonstrated here used dual-color WCBs to simultaneously assess the toxicity of ZnONPs on E. coli and the dissolution rates of ZnO-NPs. Toxicity varied depending upon the size and shape of the ZnONPs. The dissolution rate did not vary significantly according to size and shape; smaller sizes and wire shapes showed higher toxicity. Therefore, the physical properties of ZnONPs play a role in the overall toxic effect as well as dissolved Zn(II) ions.

Mechanism of enhanced antibacterial activity of ultra-fine ZnO in phosphate buffer solution with various organic acids

Ultra-fine-ZnO showed low toxicity in complex water matrix containing multiple components such as PBS buffer and the toxic mechanism of ultra-fine-ZnO has not been clearly elucidated. In present study, enhanced antibacterial activity of 200 nm diameter ultra-fine-ZnO in PBS buffer against Bacillus cereus and Escherichia coli were observed in the presence of several organic acids in comparison with ultra-fine-ZnO in PBS buffer alone. These findings indicated that the toxic effects of the ultra-fine-ZnO was dependent on the concentration of released Zn²⁺ which was affected by organic acids. The production of reactive oxygen species (ROS) did not responsible to the toxic mechanism of ultra-fine-ZnO which was tested using the antioxidant N-Acetylcysteine (NAC). Indeed, ultra-fine-ZnO induced bacteria cell membrane leakages and cell morphology damages that eventually led to cell death, which were confirmed using propidium monoazide (PMA) in combination with PCR and scanning electron microscopy (SEM). All data gathered herein suggested that released Zn²⁺ played a major role in the microbial toxicity of ultra-fine-ZnO.

Impact of titanium dioxide nanoparticles on the bacterial communities of biological activated carbon filter intended for drinking water treatment

Titanium dioxide nanoparticles (TiO2 NPs) are inevitably present in the aquatic environment owing to their increasing production and use. However, knowledge of the potential effects of TiO2 NPs on the treatment of drinking water is scarce. Herein, the effects of two types of anatase TiO2 NPs (TP1, 25 nm; TP2, 100 nm) on the bacterial community in a biological activated carbon (BAC) filter were investigated via quantitative polymerase chain reaction (Q-PCR) analysis, ATP quantification, and 454 pyrosequencing analysis. Both TP1 and TP2 significantly inhibited the bacterial ATP level (p < 0.01) and induced a decrease in the abundance of bacterial 16S rDNA gene copies at doses of 0.1 and 100 mg L(-1). Simultaneously, the diversity and evenness of the bacterial communities were considerably reduced. The relative abundances of bacteria annotated to OTUs from Nitrospira class and Betaproteobacteria class decreased upon TiO2 NP treatment, whereas those of Bacilli class and Gammaproteobacteria class increased. TiO2 NP size showed a greater effect on the bacterial composition than did the dose based on Bray-Curtis distances. These findings identified negative effects of TiO2 NPs on the bacterial community in the BAC filter. Given the fact that BAC filters are used widely in drinking water treatment plants, these results suggested a potential threat by TiO2 NP to drinking water treatment system.

The toxicity of zinc oxide nanoparticles to Lemna minor (L.) is predominantly caused by dissolved Zn

Nano-ZnO particles have been reported to be toxic to many aquatic organisms, although it is debated whether this is caused by nanoparticles per sé, or rather dissolved Zn. This study investigated the role of dissolved Zn in nano-ZnO toxicity to Lemna minor. The technical approach was based on modulating nano-ZnO dissolution by either modifying the pH of the growth medium and/or surface coating of nano-ZnO, and measuring resulting impacts on L. minor growth and physiology. Results show rapid and total dissolution of nano-ZnO in the medium (pH 4.5). Quantitatively similar toxic effects were found when L. minor was exposed to nano-ZnO or the "dissolved Zn equivalent of dissolved nano-ZnO". The conclusion that nano-ZnO toxicity is primarily caused by dissolved Zn was further supported by the observation that phytotoxicity was absent on medium with higher pH-values (>7), where dissolution of nano-ZnO almost ceased. Similarly, the reduced toxicity of coated nano-ZnO, which displays a slower Zn dissolution, is also consistent with a major role for dissolved Zn in nano-ZnO toxicity.

Continuous ultraviolet irradiation increases the adverse effects of photoreactive nanoparticles on the early development of Oryzias latipes

The present study investigated the toxicity of photoreactive nanoparticles (NPs) on the development of Oryzias latipes. Buoyant fish embryos are potentially vulnerable to sunlight-derived ultraviolet (UV) irradiation. Zinc oxide (ZnO) NPs in surface water easily absorb UV irradiation from transmitted solar light. In the present study, O. latipes were exposed to ZnO NPs under irradiation with UV or visible light. The ZnO NPs exhibited considerable toxicity toward embryos and sac fry following UV irradiation, and these toxic effects resulted in increased mortality and abnormalities. The UV irradiation induced more serious effects on embryos than did visible light irradiation, and embryonic exposure resulted in irreversible developmental impairment or death of sac fry. The adverse effects of ZnO NPs may result from Zn ions released from photoreactive ZnO NPs. The present study demonstrates photo-dependent developmental impairment of O. latipes embryos as a result of exposure to ZnO NPs. The results demonstrate that the toxicity of photoreactive ZnO NPs could vary under environmentally relevant UV irradiation. These data could serve as a guide for evaluation of the toxicity of photo-activated NPs in natural surface waters and could be useful for the ecological risk assessment of photoreactive NPs.

Trace amounts of Cu²⁺ ions influence ROS production and cytotoxicity of ZnO quantum dots

3-Aminopropyltrimethoxysilane (APTMS) was used as ligand to prepare ZnO@APTMS, Cu(2+)-doped ZnO (ZnO:Cu@APTMS) and ZnO quantum dots (QDs) with chemisorbed Cu(2+) ions at their surface (ZnO@APTMS/Cu). The dots have a diameter of ca. 5 nm and their crystalline and phase purities and composition were established by X-ray diffraction, transmission electron microscopy, UV-visible and fluorescence spectroscopies and by X-ray photoelectron spectroscopy. The effect of Cu(2+) location on the ability of the QDs to generate reactive oxygen species (ROS) under light irradiation was investigated. Results obtained demonstrate that all dots are able to produce ROS (OH, O2(-), H2O2 and (1)O2) and that ZnO@APTMS/Cu QDs generate more OH and O2(-) radicals and H2O2 than ZnO@APTMS and ZnO:Cu@APTMS QDs probably via mechanisms associating photo-induced charge carriers and Fenton reactions. In cytotoxicity experiments conducted in the dark or under light exposure, ZnO@APTMS/Cu QDs appeared slightly more deleterious to Escherichia coli cells than the two other QDs, therefore pointing out the importance of the presence of Cu(2+) ions at the periphery of the nanocrystals. On the other hand, with the lack of photo-induced toxicity, it can be inferred that ROS production cannot explain the cytotoxicity associated to the QDs. Our study demonstrates that both the production of ROS from ZnO QDs and their toxicity may be enhanced by chemisorbed Cu(2+) ions, which could be useful for medical or photocatalytic applications.

Multispecies toxicity test for silver nanoparticles to derive hazardous concentration based on species sensitivity distribution for the protection of aquatic ecosystems

With increasing concerns about the release of silver nanoparticles (AgNPs) into the environment and the risks they pose to ecological and human health, a number of studies of AgNP toxicity to aquatic organisms have been conducted. USEPA and EU JRC have published risk assessment reports for AgNPs. However, most previous studies have focused on the adverse effects of AgNPs on individual species. Hazardous concentration (HC) of AgNPs for protection of aquatic ecosystems that are based on species sensitivity distributions (SSDs) have not yet been derived because sufficient data have not been available. In this study, we conducted multispecies toxicity tests, including acute assays using eight species from five different taxonomic groups (bacteria, algae, flagellates, crustaceans and fish) and chronic assays using six species from four different taxonomic groups (algae, flagellates, crustaceans and fish). Using the results of these assays, we used a SSD approach to derive an AgNP aquatic HC5 (Hazard concentrations at the 5% species) of 0.614 μg/L. To our knowledge, this is the first report of a proposed HC of AgNPs for the protection of aquatic ecosystems that is based on SSDs and uses chronic toxicity data.

Nanomaterials for Functional Textiles and Fibers

Nanoparticles are very interesting because of their surface properties, different from bulk materials. Such properties make possible to endow ordinary products with new functionalities. Their relatively low cost with respect to other nano-additives make them a promising choice for industrial mass-production systems. Nanoparticles of different kind of materials such as silver, titania, and zinc oxide have been used in the functionalization of fibers and fabrics achieving significantly improved products with new macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional problems for textiles such as the microorganism growth onto fibers, flammability, robustness against ultraviolet radiation, and many others. In addition, the incorporation of such nanoparticles into special ultrathin fibers is also analyzed. In this field, electrospinning is a very promising technique that allows the fabrication of ultrathin fiber mats with an extraordinary control of their structure and properties, being an ideal alternative for applications such as wound healing or even functional membranes.

Comparison of Infectious Agents Susceptibility to Photocatalytic Effects of Nanosized Titanium and Zinc Oxides: A Practical Approach

Nanotechnology contributes towards a more effective eradication of pathogens that have emerged in hospitals, veterinary clinics, and food processing plants and that are resistant to traditional drugs or disinfectants. Since new methods of pathogens eradication must be invented and implemented, nanotechnology seems to have become the response to that acute need. A remarkable achievement in this field of science was the creation of self-disinfecting surfaces that base on advanced oxidation processes (AOPs). Thus, the phenomenon of photocatalysis was practically applied. Among the AOPs that have been most studied in respect of their ability to eradicate viruses, prions, bacteria, yeasts, and molds, there are the processes of TiO2/UV and ZnO/UV. Titanium dioxide (TiO2) and zinc oxide (ZnO) act as photocatalysts, after they have been powdered to nanoparticles. Ultraviolet (UV) radiation is an agent that determines their excitation. Methods using photocatalytic properties of nanosized TiO2 and ZnO prove to be highly efficient in inactivation of infectious agents. Therefore, they are being applied on a growing scale. AOP-based disinfection is regarded as a very promising tool that might help overcome problems in food hygiene and public health protection. The susceptibility of infectious agents to photocatalylic processes can be generally arranged in the following order: viruses > prions > Gram-negative bacteria > Gram-positive bacteria > yeasts > molds.

Zinc oxide induces the stringent response and major reorientations in the central metabolism of Bacillus subtilis

Microorganisms, such as bacteria, are one of the first targets of nanoparticles in the environment. In this study, we tested the effect of two nanoparticles, ZnO and TiO2, with the salt ZnSO4 as the control, on the Gram-positive bacterium Bacillus subtilis by 2D gel electrophoresis-based proteomics. Despite a significant effect on viability (LD50), TiO2 NPs had no detectable effect on the proteomic pattern, while ZnO NPs and ZnSO4 significantly modified B. subtilis metabolism. These results allowed us to conclude that the effects of ZnO observed in this work were mainly attributable to Zn dissolution in the culture media. Proteomic analysis highlighted twelve modulated proteins related to central metabolism: MetE and MccB (cysteine metabolism), OdhA, AspB, IolD, AnsB, PdhB and YtsJ (Krebs cycle) and XylA, YqjI, Drm and Tal (pentose phosphate pathway). Biochemical assays, such as free sulfhydryl, CoA-SH and malate dehydrogenase assays corroborated the observed central metabolism reorientation and showed that Zn stress induced oxidative stress, probably as a consequence of thiol chelation stress by Zn ions. The other patterns affected by ZnO and ZnSO4 were the stringent response and the general stress response. Nine proteins involved in or controlled by the stringent response showed a modified expression profile in the presence of ZnO NPs or ZnSO4: YwaC, SigH, YtxH, YtzB, TufA, RplJ, RpsB, PdhB and Mbl. An increase in the ppGpp concentration confirmed the involvement of the stringent response during a Zn stress. All these metabolic reorientations in response to Zn stress were probably the result of complex regulatory mechanisms including at least the stringent response via YwaC.

ZnO Nanoparticles Affect Bacillus subtilis Cell Growth and Biofilm Formation

Zinc oxide nanoparticles (ZnO NPs) are an important antimicrobial additive in many industrial applications. However, mass-produced ZnO NPs are ultimately disposed of in the environment, which can threaten soil-dwelling microorganisms that play important roles in biodegradation, nutrient recycling, plant protection, and ecological balance. This study sought to understand how ZnO NPs affect Bacillus subtilis, a plant-beneficial bacterium ubiquitously found in soil. The impact of ZnO NPs on B. subtilis growth, FtsZ ring formation, cytosolic protein activity, and biofilm formation were assessed, and our results show that B. subtilis growth is inhibited by high concentrations of ZnO NPs (≥ 50 ppm), with cells exhibiting a prolonged lag phase and delayed medial FtsZ ring formation. RedoxSensor and P_hag-GFP fluorescence data further show that at ZnO-NP concentrations above 50 ppm, B. subtilis reductase activity, membrane stability, and protein expression all decrease. SDS-PAGE Stains-All staining results and FT-IR data further demonstrate that ZnO NPs negatively affect exopolysaccharide production. Moreover, it was found that B. subtilis biofilm surface structures became smooth under ZnO-NP concentrations of only 5–10 ppm, with concentrations ≤ 25 ppm significantly reducing biofilm formation activity. XANES and EXAFS spectra analysis further confirmed the presence of ZnO in co-cultured B. subtilis cells, which suggests penetration of cell membranes by either ZnO NPs or toxic Zn⁺ ions from ionized ZnO NPs, the latter of which may be deionized to ZnO within bacterial cells. Together, these results demonstrate that ZnO NPs can affect B. subtilis viability through the inhibition of cell growth, cytosolic protein expression, and biofilm formation, and suggest that future ZnO-NP waste management strategies would do well to mitigate the potential environmental impact engendered by the disposal of these nanoparticles.

Cytotoxicity of ZnO NPs towards fresh water algae Scenedesmus obliquus at low exposure concentrations in UV-C, visible and dark conditions

Continuous increase in the usage of ZnO nanoparticles in commercial products has exacerbated the risk of release of these particles into the aquatic environment with possible harmful effects on the biota. In the current study, cytotoxic effects of two types of ZnO nanoparticles, having different initial effective diameters in filtered and sterilized lake water medium [487.5±2.55 nm for ZnO-1 NPs and 616.2±38.5 nm for ZnO-2 NPs] were evaluated towards a dominant freshwater algal isolate Scenedesmus obliquus in UV-C, visible and dark conditions at three exposure concentrations: 0.25, 0.5 and 1 mg/L. The toxic effects were found to be strongly dependent on the initial hydrodynamic particle size in the medium, the exposure concentrations and the irradiation conditions. The loss in viability, LDH release and ROS generation were significantly enhanced in the case of the smaller sized ZnO-1 NPs than in the case of ZnO-2 NPs under comparable test conditions. The toxicity of both types of ZnO NPs was considerably elevated under UV-C irradiation in comparison to that in dark and visible light conditions, the effects being more enhanced in case of ZnO-1 NPs. The size dependent dissolution of the ZnO NPs in the test medium and possible toxicity due to the released Zn(2+) ions was also noted. The surface adsorption of the nanoparticles was substantiated by scanning electron microscopy. The internalization/uptake of the NPs by the algal cells was confirmed by fluorescence microscopy, transmission electron microscopy, and elemental analyses.

Review of titanium dioxide nanoparticle phototoxicity: Developing a phototoxicity ratio to correct the endpoint values of toxicity tests

Titanium dioxide nanoparticles are photoactive and produce reactive oxygen species under natural sunlight. Reactive oxygen species can be detrimental to many organisms, causing oxidative damage, cell injury, and death. Most studies investigating TiO2 nanoparticle toxicity did not consider photoactivation and performed tests either in dark conditions or under artificial lighting that did not simulate natural irradiation. The present study summarizes the literature and derives a phototoxicity ratio between the results of nano-titanium dioxide (nano-TiO2 ) experiments conducted in the absence of sunlight and those conducted under solar or simulated solar radiation (SSR) for aquatic species. Therefore, the phototoxicity ratio can be used to correct endpoints of the toxicity tests with nano-TiO2 that were performed in absence of sunlight. Such corrections also may be important for regulators and risk assessors when reviewing previously published data. A significant difference was observed between the phototoxicity ratios of 2 distinct groups: aquatic species belonging to order Cladocera, and all other aquatic species. Order Cladocera appeared very sensitive and prone to nano-TiO2 phototoxicity. On average nano-TiO2 was 20 times more toxic to non-Cladocera and 1867 times more toxic to Cladocera (median values 3.3 and 24.7, respectively) after illumination. Both median value and 75% quartile of the phototoxicity ratio are chosen as the most practical values for the correction of endpoints of nano-TiO2 toxicity tests that were performed in dark conditions, or in the absence of sunlight.

Chances and limitations of nanosized titanium dioxide practical application in view of its physicochemical properties

Nanotechnology is a field of science that is nowadays developing in a dynamic way. It seems to offer almost endless opportunities of contribution to many areas of economy and human activity, in general. Thanks to nanotechnology, the so-called nanomaterials can be designed. They present structurally altered materials, with their physical, chemical and biological properties entirely differing from properties of the same materials manufactured in microtechnology. Nanotechnology creates a unique opportunity to modify the matter at the level of atoms and particles. Therefore, it has become possible to obtain items displaying new, useful properties, i.e. self-disinfecting and self-cleaning surfaces. Those surfaces are usually covered by a thin layer of a photocatalyst. The role of the photocatalyst is most of the time performed by the nanosized titanium dioxide (nano-TiO2). Excitation of nano-TiO2 by ultraviolet radiation initiates advanced oxidation processes and reactions leading to the creation of oxygen vacancies that bind water particles. As a result, photocatalytic surfaces are given new properties. Those properties can then be applied in a variety of disciplines, such as medicine, food hygiene, environmental protection or building industry. Practically, the applications include inactivation of microorganisms, degradation of toxins, removing pollutants from buildings and manufacturing of fog-free windows or mirrors.

Toxicity of metal oxide nanoparticles: mechanisms, characterization, and avoiding experimental artefacts

Metal oxide nanomaterials are widely used in practical applications and represent a class of nanomaterials with the highest global annual production. Many of those, such as TiO2 and ZnO, are generally considered non-toxic due to the lack of toxicity of the bulk material. However, these materials typically exhibit toxicity to bacteria and fungi, and there have been emerging concerns about their ecotoxicity effects. The understanding of the toxicity mechanisms is incomplete, with different studies often reporting contradictory results. The relationship between the material properties and toxicity appears to be complex and diifficult to understand, which is partly due to incomplete characterization of the nanomaterial, and possibly due to experimental artefacts in the characterization of the nanomaterial and/or its interactions with living organisms. This review discusses the comprehensive characterization of metal oxide nanomaterials and the mechanisms of their toxicity.

Additive-free 1,4-butanediol mediated synthesis: a suitable route to obtain nanostructured, mesoporous spherical zinc oxide materials with multifunctional properties

A family of mesoporous, self-aggregated zinc oxide materials with spherical morphologies of high crystalline quality, is obtained through a facile, additive-free polyol procedure.

Silver, zinc oxide and titanium dioxide nanoparticle ecotoxicity to bioluminescent Pseudomonas putida in laboratory medium and artificial wastewater

Bacteria based ecotoxicology assessment of manufactured nanoparticles is largely restricted to Escherichia coli bioreporters in laboratory media. Here, toxicity effects of model OECD nanoparticles (Ag NM-300K, ZnO NM-110 and TiO2 NM-104) were assessed using the switch-off luminescent Pseudomonas putida BS566::luxCDABE bioreporter in Luria Bertani (LB) medium and artificial wastewater (AW). IC50 values ∼4 mg L(-1), 100 mg L(-1) and >200 mg L(-1) at 1 h were observed in LB for Ag NM-300K, ZnO NM-110 and TiO2 NM-104, respectively. Similar results were obtained in AW for Ag NM-300K (IC50∼5 mg L(-1)) and TiO2 NM-104 (IC50>200 mg L(-1)) whereas ZnO NM-110 was significantly higher (IC50>200 mg L(-1)). Lower ZnO NM-110 toxicity in AW compared to LB was associated with differences in agglomeration status and dissolution rate. This work demonstrates the importance of nanoecotoxicological studies in environmentally relevant matrices.