Benzene-contaminated groundwater remediation using calcium peroxide nanoparticles: synthesis and process optimization

Thermally enhanced biodegradation of benzo[a]pyrene and benzene co-contaminated soil: Bioavailability and generation of ROS

In this study, a set of comprehensive experiments were conducted to explore the effects of temperature on the biodegradation, bioavailability, and generation of reactive oxygen species (ROS) by thermally enhanced biodegradation (TEB) under benzene and BaP co-contaminated conditions. The biodegradation rates of benzene increased from 57.4% to 88.7% and 84.9%, and the biodegradation efficiency of BaP was enhanced from 15.8% to 34.6% and 28.6%, when the temperature was raised from the ambient temperature of 15 °C to 45 °C and 30 °C, respectively. In addition, the bioavailability analysis results demonstrated that the water- and butanol-extractable BaP increased with elevated temperatures. High enzymatic activities and PAH-RHD_α gene in gram-positive bacteria favored the long-term elevated temperatures (30 and 45 °C) compared to gram-negative bacteria. Moreover, ROS species (O₂^•- and •OH) generation was detected which were scavenged by the increased superoxide dismutase and catalase activities at elevated temperatures. Soil properties (pH, TOC, moisture, total iron, Fe³⁺, and Fe²⁺) were affected by the temperature treatments, revealing that metal-organic-associated reactions occurred during the TEB of benzene-BaP co-contamination. The results concluded that biodegradation of benzene-BaP co-contamination was greatly improved at 45 °C and that microbial activities enhanced the biodegradation under TEB via the increased bioavailability and generation and degradation of ROS.

Jamil SNA, Choong TSY, Mat Azmi ID, Abdul Romli NA, Abdullah LC, Chiang PC, Li F. Synthesis of Calcium Peroxide Nanoparticles with Starch as a Stabilizer for the Degradation of Organic Dye in an Aqueous Solution

One of the most significant environmental problems in the world is the massive release of dye wastewater from the dyeing industry. Therefore, the treatment of dyes effluents has received significant attention from researchers in recent years. Calcium peroxide (CP) from the group of alkaline earth metal peroxides acts as an oxidizing agent for the degradation of organic dyes in water. It is known that the commercially available CP has a relatively large particle size, which makes the reaction rate for pollution degradation relatively slow. Therefore, in this study, starch, a non-toxic, biodegradable and biocompatible biopolymer, was used as a stabilizer for synthesizing calcium peroxide nanoparticles (Starch@CPnps). The Starch@CPnps were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET), dynamic light scattering (DLS), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX) and scanning electron microscopy (SEM). The degradation of organic dyes, methylene blue (MB), using Starch@CPnps as a novel oxidant was studied using three different parameters: initial pH of the MB solution, calcium peroxide initial dosage and contact time. The degradation of the MB dye was carried out via a Fenton reaction, and the degradation efficiency of Starch@CPnps was successfully achieved up to 99%. This study shows that the potential application of starch as a stabilizer can reduce the size of the nanoparticles as it prevents the agglomeration of the nanoparticles during synthesis.

Effective Removal of Glyphosate from Aqueous Systems Using Synthesized PEG-Coated Calcium Peroxide Nanoparticles: Kinetics Study, H2O2 Release Performance and Degradation Pathways

Glyphosate (N-phosphonomethyl glycine) is a non-selective, broad-spectrum organophosphate herbicide. Its omnipresent application with large quantity has made glyphosate as a problematic contaminant in water. Therefore, an effective technology is urgently required to remove glyphosate and its metabolites from water. In this study, calcium peroxide nanoparticles (nCPs) were functioned as an oxidant to produce sufficient hydroxyl free radicals (·OH) with the presence of Fe²⁺ as a catalyst using a Fenton-based system. The nCPs with small particle size (40.88 nm) and high surface area (28.09 m²/g) were successfully synthesized via a co-precipitation method. The synthesized nCPs were characterized using transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), Brunauer-Emmett-Teller analysis (BET), dynamic light scattering (DLS), and field emission scanning electron microscopy (FESEM) techniques. Under the given conditions (pH = 3.0, initial nCPs dosage = 0.2 g, Ca²⁺/Fe²⁺ molar ratio = 6, the initial glyphosate concentration = 50 mg/L, RT), 99.60% total phosphorus (TP) removal and 75.10% chemical oxygen demand (COD) removal were achieved within 75 min. The degradation process fitted with the Behnajady-Modirshahla-Ghanbery (BMG) kinetics model. The H₂O₂ release performance and proposed degradation pathways were also reported. The results demonstrated that calcium peroxide nanoparticles are an efficient oxidant for glyphosate removal from aqueous systems.

Steady release-activation of hydrogen peroxide and molecular oxygen towards the removal of ciprofloxacin in the FeOCl/CaO2 system

Difficult storage of hydrogen peroxide (H₂O₂), low production of reactive oxygen species (ROS), and inefficient Fe(II)/Fe(III) recycling limit the application of the Fenton-like process. Calcium peroxide (CaO₂) based iron oxychloride (FeOCl) system was developed for solving these deficiencies, and ciprofloxacin (CIP) was effectively degraded within 20 min treatment. 0.33 mmol/L H₂O₂ and 2.4 mg/L dissolved oxygen (DO) were produced via CaO₂. Quenching experiments and electron paramagnetic resonance results confirmed that hydroxyl radicals (·OH) and superoxide anion (·O₂^-) worked as the main ROS. Density functional theory (DFT) calculations and experimental results suggested that H atoms of H₂O₂ adsorbed on FeOCl favored the activation of H₂O₂ into ·OH and DO into ·O₂^-, and electrophilic Cl and O coordination in FeOCl contributed to the cycle of Fe(II)/Fe(III). ·OH and·O₂^- were responsible for CIP degradation, and toxicity assessments demonstrated that the developed system reduced the hazard of treated solution. Clarity of FeOCl/CaO₂ system triple roles, including H₂O₂ and O₂ production, activation into ROS, and Fe(II)/Fe(III) recycling, facilitates the efficient utilization of O₂ in Fenton-like system.

An investigation into the efficiency of electrokinetic and electrokinetic coupled with calcium peroxide permeable reactive barriers techniques for soil remediation using a statistical analysis

The current study emphasizes on the applicability of combining the electrokinetic (EK) and permeable reactive barriers (PRB) techniques compared to the simple EK technique. For this purpose, a statistical analysis is conducted using the Fractional Factorial Design statistical method. Also, General Linear Model and Two-sample T-Test analyzes are considered to clarify which type of soil remediation technique represents the highest efficiency. Calcium peroxide, an affordable material with easy capability for cultivation, is utilized in the PRB process to eliminate the soil from diesel contamination. The experiments were performed for 3 days and 10 days, according to which the initial contamination rates of 10 and 20% were selected, and the applied voltages were 20 V and 30 V. Using the innovative remediation technique, the experiments were conducted for 10 days with 20% initial pollution content and the applied voltage of 30 V, the initial gasoil content was about 190.5 mg/g, and after applying the proposed technique, the average final pollution content throughout soil reached approximately 37 mg/g. This experiment was also conducted for the approximately initial gasoil content of 185, 206, and 191 mg/g, which led to the removal efficiency of 79.59%, 78.93%, and 79.15%, respectively. The main novelty of this paper is attributed to the use of calcium peroxide in the EK-PRB technique and the statistical analysis conducted in this study that indicates the remarkable efficiency of the proposed approach. It was also revealed that the efficiency of the proposed technique is on par with the other state-of-art ones presented in the literature and even sometimes outperforms them.

Decontamination of water co-polluted by copper, toluene and tetrahydrofuran using lauric acid

Co-contamination by organic solvents (e.g., toluene and tetrahydrofuran) and metal ions (e.g., Cu²⁺) is common in industrial wastewater and in industrial sites. This manuscript describes the separation of THF from water in the absence of copper ions, as well as the treatment of water co-polluted with either THF and copper, or toluene and copper. Tetrahydrofuran (THF) and water are freely miscible in the absence of lauric acid. Lauric acid separates the two solvents, as demonstrated by proton nuclear magnetic resonance (¹H NMR) and Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy (ATR-FTIR). The purity of the water phase separated from 3:7 (v/v) THF:water mixtures using 1 M lauric acid is ≈87%v/v. Synchrotron small angle X-Ray scattering (SAXS) indicates that lauric acid forms reverse micelles in THF, which swell in the presence of water (to host water in their interior) and ultimately lead to two free phases: 1) THF-rich and 2) water-rich. Deprotonated lauric acid (laurate ions) also induces the migration of Cu²⁺ ions in either THF (following separation from water) or in toluene (immiscible in water), enabling their removal from water. Laurate ions and copper ions likely interact through physical interactions (e.g., electrostatic interactions) rather than chemical bonds, as shown by ATR-FTIR. Inductively coupled plasma—optical emission spectrometry (ICP-OES) demonstrates up to 60% removal of Cu²⁺ ions from water co-polluted by CuSO₄ or CuCl₂ and toluene. While lauric acid emulsifies water and toluene in the absence of copper ions, copper salts destabilize emulsions. This is beneficial, to avoid that copper ions are re-entrained in the water phase alongside with toluene, following their migration in the toluene phase. The effect of copper ions on emulsion stability is explained based on the decreased interfacial activity and compressional rigidity of interfacial films, probed using a Langmuir trough. In wastewater treatment, lauric acid (a powder) can be mixed directly in the polluted water. In the context of groundwater remediation, lauric acid can be solubilized in canola oil to enable its injection to treat aquifers co-polluted by organic solvents and Cu²⁺. In this application, injectable filters obtained by injecting cationic hydroxyethylcellulose (HEC +) would impede the flow of toluene and copper ions partitioned in it, protecting downstream receptors. Co-contaminants can be subsequently extracted upstream of the filters (using pumping wells), to enable their simultaneous removal from aquifers.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Degradation of diclofenac sodium using Fenton-like technology based on nano-calcium peroxide

A nano-calcium peroxide (nCaO₂) powder with a purity of 89.1% was prepared using an improved traditional method. Then, the as-prepared nCaO₂ was used as the source of hydrogen peroxide (H₂O₂) for the Fenton-like degradation of diclofenac sodium (DCF). The results showed that nCaO₂ performed better for DCF removal when compared to nCaO₂ prepared by a conventional method and commercial calcium peroxide (CaO₂). Further experimental results indicated that 97.5% of DCF could be removed in 180 min at a nCaO₂/Fe²⁺-EDTA/DCF molar ratio of 16/8-8/1, which was more efficient than in the H₂O₂/EDTA-Fe²⁺/DCF and nCaO₂/Fe²⁺/DCF systems. The best removal rate of DCF was at pH 6.0, unlike previous claims that stated that the lower the pH in the buffer system, the better the degradation of DCF. In addition, the influence of water quality parameters, such as Cl^-, NO₃^-, SO₄^2-, HCO₃^-, and humic acid (HA), on DCF removal were evaluated. A free radical masking experiment revealed the existence of hydroxyl radical (OH), superoxide radical (O₂^-) and singlet oxygen (¹O₂), and indicated that the degradation of DCF was mainly due to oxidation caused by OH. Electron paramagnetic resonance (EPR) studies for different systems and different active oxygen species were carried out, and it was further confirmed that OH radicals have high intensity in the Fenton-like system based on nCaO₂. EPR results also showed that the addition of EDTA can promote the production of OH. According to the identification of the dominant reactive species and GC-MS, the possible theoretical DCF degradation pathways were proposed.

Facile Fabrication of Oxygen-Releasing Tannylated Calcium Peroxide Nanoparticles

This study reports a new approach for the facile fabrication of calcium peroxide (CaO₂) nanoparticles using tannic acid (TA) as the coordinate bridge between calcium ions. Tannylated-CaO₂ (TA/CaO₂) nanoparticles were prepared by reacting calcium chloride (CaCl₂) with hydrogen peroxide (H₂O₂) in ethanol containing ammonia and different amounts of TA (10, 25, and 50 mg). The prepared TA/CaO₂ aggregates consisted of nanoparticles 25–31 nm in size. The nanoparticles prepared using 10 mg of TA in the precursor solution exhibited the highest efficiency for oxygen generation. Moreover, the oxygen generation from TA (10 mg)/CaO₂ nanoparticles was higher in an acidic environment.

'Emulsion locks' for the containment of hydrocarbons during surfactant flushing

Reversible double water in oil in water (W/O/W) emulsions were developed to contain subsurface hydrocarbon spills during their remediation using surfactant flushing. Double emulsions were prepared by emulsifying CaCl₂ solutions in canola oil, and subsequently by emulsifying the W/O emulsions in aqueous sodium alginate solutions. The formation of double emulsions was confirmed with confocal and optical microscopy. The double emulsions reversed and gelled when mixed with the surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CPB). Gels can act as 'emulsion locks' to prevent spreading of the hydrocarbon plume from the areas treated with surfactant flushing, as shown in sand column tests. Shear rheology was used to quantify the viscoelastic moduli increase (gelation) upon mixing the double emulsion with SDS and CPB. SDS was more effective than CPB in gelling the double emulsions. CPB and SDS could adsorb at the interface between water and model hydrocarbons (toluene and motor oil), lowering the interfacial tension and rigidifying the interface (as shown with a Langmuir trough). Bottle tests and optical microscopy showed that SDS and CPB produced W/O and O/W emulsions, with either toluene or motor oil and water. The emulsification of motor oil and toluene in water with SDS and CPB facilitated their flow through sand columns and their recovery. Toluene recovery from sand columns was quantitated using Gas-Chromatography Mass-Spectroscopy (GC-MS). The data show that SDS and CPB can be used both for surfactant flushing and to trigger the gelation of 'emulsion locks'. Ethanol also gelled the emulsions at 100 mL/L.

The impact of calcium peroxide on groundwater bacterial diversity during naphthalene removal by permeable reactive barrier (PRB)

Oxygen-releasing compounds (ORCs) have recently gained much attention in contaminated groundwater remediation. We investigated the impact of calcium peroxide nanoparticles on the groundwater indigenous bacteria in a bioremediation process by permeable reactive barrier (PRB). Three sand-packed columns were applied, including (1) control column (fresh groundwater), (2) natural remediation column (contaminated groundwater), and (3) biostimulation column (contaminated groundwater amended with CaO₂). Actinobacteria and Proteobacteria constituted the main phyla among the identified isolates. According to the results of next-generation sequencing, Proteobacteria was the dominant phylum (81% relative abundance) in the natural remediation condition. But, it was declined to 38.1% in the biostimulation column. Meanwhile, the abundance of Actinobacteria and Bacteroidetes were increased to 25.9% and 15.4%, respectively, by exposing the groundwater microbial structure to CaO₂ nanoparticles. Furthermore, orders Chlamydiales, Nitrospirales, and Oceanospirillales existing in the control column were detected in the presence of naphthalene. Shannon index was 4.32 for the control column samples, while it was reduced to 2.73 and 2.00 in the natural and biostimulation columns, respectively. Therefore, the present study provides a considerable insight into the impact of ORCs on the groundwater microbial community during the bioremediation process.

Gelation on demand using switchable double emulsions: A potential strategy for the in situ immobilization of organic contaminants

Switchable double emulsions (water in oil in water, W/O/W) are proposed for the in situ immobilization of subsurface organic contaminants such as toluene, hexane or benzene. Primary W/O emulsions were prepared by emulsifying 250 mL of 0.36 M CaCl₂ aqueous solutions in 1 L of canola oil (with 12.5 g/L of ethylcellulose, EC, and 2.5 g/L of calcium stearate). In the primary W/O emulsion the water droplets in oil were ≈8 μm, as observed using an optical and a confocal microscope. EC and calcium stearate adsorbed at the oil water interface (as demonstrated by interfacial tension measurements), forming films which stabilized the W/O emulsions (as verified with bottle tests). Experiments conducted using a Langmuir trough suggest that EC and calcium stearate films did not desorb from the oil-water interface upon compression. Crumpling tests and optical microscopy observations indicate that EC and calcium stearate films were skin-like, and buckled when deformed. To obtain double W/O/W emulsions the primary emulsions were emulsified in a 0.75 wt% solution of sodium alginate, with 2 mL/L of Tween 20 and 10 g/L of NaCl. The formation of W/O/W emulsions was verified through optical microscopy and confocal microscopy observations. In the absence of the contaminants the double emulsions were stable, as observed by resting them on the bench over three days and agitating them with a multi-action wrist shaker for 30 min. Also, they had low shear elastic (G' = 2.67 ± 0.58 Pa) and viscous (G″ = 1.69 ± 0.24 Pa) moduli, which should facilitate their transport through geological media (e.g. soil) to polluted areas. Upon mixing with toluene, hexane or benzene at concentrations ranging from 5% to 17%, the double emulsions were destabilized. Emulsion destabilization caused the release of CaCl₂, which crosslinked sodium alginate and formed gels in which the contaminants were incorporated. The gelation rate and the magnitude of the viscoelastic moduli depended on the contaminant type and concentration, and on the mixing time. Gelation occurred fastest with the highest toluene concentrations tested (9% to 17%), but the highest elastic moduli were measured with 9% toluene concentrations for the longest mixing times tested (90 s). Gelation occurred slowest with hexane, likely due to the poor solubility of EC in hexane. Because of their ability to gel exclusively in contaminant proximity, the double emulsions studied offer a potential strategy to control the migration of plumes of contaminants such as toluene, hexane or benzene.

Synthesis of CaO2 Nanocrystals and Their Spherical Aggregates with Uniform Sizes for Use as a Biodegradable Bacteriostatic Agent

As a solid precursor to O₂ and hydrogen peroxide (H₂ O₂ ), calcium peroxide (CaO₂ ) has found widespread use in applications related to disinfection and contaminant degradation. The lack of uniform nanoparticles, however, greatly limits the potential use of this material in other applications related to medicine. Here, a new route to the facile synthesis of CaO₂ nanocrystals and their spherical aggregates with uniform, controllable sizes is reported. The synthesis involves the reaction between CaCl₂ and H₂ O₂ to generate CaO₂ primary nanocrystals of 2-15 nm in size in ethanol, followed by their aggregation into uniform, spherical particles with the aid of poly(vinyl pyrrolidone) (PVP). The average diameter of the spherical aggregates can be easily tuned in the range of 15-100 nm by varying the concentrations of CaCl₂ and/or PVP. For the spherical aggregates with a smaller size, they release H₂ O₂ and O₂ more quickly when exposed to water, resulting in superior antimicrobial activity. This study not only demonstrates a new route to the synthesis of uniform CaO₂ nanocrystals and their spherical aggregates but also offers a promising bacteriostatic agent with biodegradability.

Bioremediation of benzene-contaminated groundwater by calcium peroxide (CaO2) nanoparticles: Continuous-flow and biodiversity studies

Calcium peroxide (CaO₂) nanoparticles have been extensively applied in treatment of contaminated groundwater through bioremediation or modified Fenton (MF) processes. In the present study utilization of CaO₂ in bioremediation and MF (CaO₂+FeSO₄) reaction is investigated for benzene (50 mg/L) removal in continuous flow sand-packed columns. The results indicated that MF produced OH radicals markedly increased benzene remediation at first 30 days (up to 93%). But, OH generation rate was gradually declined when the pH was increased and finally 75% of initial benzene removed after 100d. In bioremediation column, because of supplying adequate oxygen by CaO₂, the number of planktonic bacteria logarithmically increased to more than 5 × 10⁶ CFU/mL (two orders of magnitude) and consequently 100% benzene removal was achieved by the end of experiment. Scanning electron microscopy analysis visualized the attached biofilm growth on sand surfaces in CaO₂ injected columns indicating their key role in the remediation process. The impact of each process on the microbial biodiversity of groundwater was investigated by next generation sequencing (NGS) of the 16S rRNA gene. The alpha and beta analysis indicated that microbial diversity is decreased by CaO₂ injection while benzene-degrading species such as Silanimonas, Arthrobacter and Pseudomonas spp. were dominated in remediation column.

Degradation of trichloroethylene in aqueous solution by nanoscale calcium peroxide in the Fe(II)-based catalytic environments

In this study, nCaO₂ was synthesized successfully and applied in the Fe(II)-based catalytic environments in investigating trichloroethylene (TCE) removal performance. nCaO₂ with the particle sizes in the range of 50-200 nm was prepared, and it performed better for TCE removal when compared to the conventional CaO₂. Further experimental results showed that 70.4% of TCE could be removed in 180 min at the nCaO₂/Fe(II)/TCE molar ratio of 1/2/1, while this data was elevated to 86.1% in the presence of citric acid (CA) at the nCaO₂/Fe(II)/CA/TCE molar ratio of 1/2/2/1 in the same test period. Probe compound tests, specifically designed for free radicals confirmation, demonstrated the presence of HO• and O₂ ^-•. Moreover, scavenging tests indicated that HO• was the major radical responsible for TCE degradation but O₂ ^-• promoted the removal of TCE in both nCaO₂/Fe(II) and nCaO₂/Fe(II)-CA system. In addition, the effects of initial solution pH and anions (Cl^-, HCO₃ ^-) were also evaluated. The performance of TCE degradation in actual groundwater demonstrated that both nCaO₂/Fe(II) and nCaO₂/Fe(II)-CA systems can be applicable for TCE removal in ISCO practice and the nCaO₂/Fe(II)-CA system is much promising technique. These fundamental data strongly confirmed the feasibility and potential of nCaO₂ based technique in the remediation of TCE contaminated groundwater.

Application of encapsulated magnesium peroxide (MgO2) nanoparticles in permeable reactive barrier (PRB) for naphthalene and toluene bioremediation from groundwater

One of the challenges in the petroleum hydrocarbon contaminated groundwater remediation by oxygen releasing compounds (ORCs) is to identify the remediation mechanism and determine the impact of ORCs on the environment and the intrinsic groundwater microorganisms. In this research, the application of encapsulated magnesium peroxide (MgO₂) nanoparticles in the permeable reactive barrier (PRB) for bioremediation of the groundwater contaminated by toluene and naphthalene was studied in the continuous flow sand-packed plexiglass columns within 50 d experiments. For the biodiversity studies, next generation sequencing (NGS) of the 16S rRNA gene was applied. The results showed that naphthalene was metabolized (within 20 days) faster than toluene (after 30 days) by microorganisms of the aqueous phase. By comparing the contaminant removal in the biotic (which resulted in the complete contaminant removal) and abiotic (around 32% removal for naphthalene and 36% for toluene after 50 d) conditions, the significant role of microorganisms on the decontamination process was proved. Furthermore, the attached microbial communities on the porous media were visualized by scanning electron microscopy (SEM). Microbial community structure analysis by NGS technique revealed that the microbial species which were able to degrade toluene and naphthalene such as P. putida and P. mendocina respectively were stimulated by addition of MgO₂ nanoparticles. The presented study resulted in a momentous insight into the application of MgO₂ nanoparticles in the hydrocarbon compounds removal from groundwater.

Naphthalene remediation form groundwater by calcium peroxide (CaO2) nanoparticles in permeable reactive barrier (PRB)

This study investigated the applicability of synthesized calcium peroxide (CaO₂) nanoparticles for naphthalene bioremediation by permeable reactive barrier (PRB) from groundwater. According to the batch experiments the application of 400 mg/L of CaO₂ nanoparticles was the optimum concentration for naphthalene (20 mg/L) bioremediation. Furthermore, the effect of environmental conditions on the stability of nanoparticles showed the tremendous impacts of the initial pH and temperature on the stability and oxygen releasing potential of CaO₂. Therefore, raising the initial pH from 3 to 12 elevated the dissolved oxygen from 4 to 13.6 mg/L and the stability of nanoparticles was significantly improved around 70 d. Moreover, by increasing the temperature from 4 to 30 °C, the stability of CaO₂ declined from 120 to 30 d. The continuous-flow experiments revealed that the naphthalene-contaminated groundwater was completely bio-remediated in the presence of CaO₂ nanoparticles and microorganisms from the effluent of the column within 50 d. While, the natural remediation of the contaminant resulted in 19.7% removal at the end of the experiments (350 d). Additionally, the attached biofilm on the surface of the PRB zone was studied by scanning electron microscopy (SEM) which showed the higher biofilm formation on the pumice surfaces in the bioremediation column in comparison to the natural remediation column. The physic-chemical characteristics of the effluents from each column was also analyzed and indicated no negative impact of the bioremediation process on the groundwater. Consequently, the present paper provides a comprehensive study on the application of the CaO₂ nanoparticles in PAH-contaminated groundwater treatment.

CaO2 based Fenton-like reaction at neutral pH: Accelerated reduction of ferric species and production of superoxide radicals

One challenge in H₂O₂ based Fenton-like reaction is to break through the limitation of slow reduction of ferric species (Fe^III). Present work describes a dramatic acceleration of Fenton-like reaction at neutral pH by using calcium peroxide (CaO₂) as a source of hydrogen peroxide (H₂O₂) and EDTA as a chelating agent of ferric ions. In an optimized condition, phenol degradation in the H₂O₂ system displayed an initial latent time of 60 min, while phenol can be degraded immediately and removed completely in 30 min in the CaO₂ system. Visual MINTEQ analyses indicated Fe-EDTA^- was the active species in the reaction. The contribution of ¹O₂ in CaO₂ system was excluded by the poor selectivity in phenol conversion and the comparable ¹O₂-TEMP EPR signals in both CaO₂ and H₂O₂ systems. Kinetic analyses using chloroform as the probe of O₂^·- suggested the high production rate of O₂^·-, which is four orders of magnitude higher than that in H₂O₂ system. The mechanism of the accelerated CaO₂ based Fenton-like reactions was featured by that two electrons coming from CaO₂ can be utilized to promote reduction of Fe^III: an inner sphere electron transfer takes place to reduce Fe^III-EDTA and produce O₂^·-, and subsequently O₂^·- provides an electron to reduce another Fe^III-EDTA. The revealed intrinsic reducibility in CaO₂ based Fenton-like reaction represents a new strategy to break through the well-known rate limiting step of Fe^III reduction in Fenton-like reaction and facilitate the removal of organic pollutants at neutral pHs, and also indicates a promising source of O₂^·- for diverse applications.

Application of magnesium peroxide (MgO2) nanoparticles for toluene remediation from groundwater: batch and column studies

In the present study, magnesium peroxide (MgO₂) nanoparticles were synthesized by electro-deposition process and characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The batch experiments were conducted to evaluate the MgO₂ half-life (600 mg/L) in groundwater under various temperatures (4, 15, and 30 °C) and initial pH (3, 7, and 12). The effect of Fe²⁺ ions (enhanced oxidation) on the toluene remediation by MgO₂ was also investigated. Nanoparticles were injected to sand-packed continuous-flow columns, and toluene removal (50 ppm) was studied within 50 days at 15 °C. The results indicated that the half-life of MgO₂ at pH 3 and 12 were 5 and 15 days, respectively, in comparison to 10 days at the initial pH 7 and 15 °C. The nanoparticles showed 20 and 7.5 days half-life at 4 and 30 °C temperatures, respectively. Injection of Fe²⁺ ions indicated an impressive effect on toluene removal by MgO₂, and the contaminant was completely removed after 5 and 10 days, in the batch and column experiments, respectively. Confocal laser scanning microscope (CLSM) analysis indicated that the attached biofilm had a significant role in the decontamination of groundwater. Comparison of bioremediation and enhanced oxidation resulted in a considerable insight into the application of magnesium peroxide in groundwater remediation. Graphical abstract ᅟ.

Electrolytic control of hydrogen peroxide release from calcium peroxide in aqueous solution

The in situ generation of hydrogen peroxide (H₂O₂) for water treatment is more practical than the use of liquid H₂O₂, which is costly to store and transport. Calcium peroxide (CaO₂), a solid carrier of H₂O₂, can release H₂O₂ on dissolution in water. However, the constant H₂O₂ release rate of CaO₂ has been a bottleneck constraining its wider application. In this study, a practical electrochemical method using a divided cell is developed to control the rate of release of H₂O₂ from CaO₂. The results show that the rate of H₂O₂ release from CaO₂ is enhanced in the anolyte. The increase in H₂O₂ release is positively correlated with the current. Under a current of 100 mA, the H₂O₂ concentration was 2.5 times higher after 30 min of electrolysis than in the control experiment in which no current was applied. Water electrolysis in the anodic compartment generates protons that not only: (i) en-hance dissolution of CaO₂ and release of H₂O₂, but also (ii) neutralize the alkaline pH resulting from CaO₂ dissolution, thus providing new advantages for the use of CaO₂. This effective technique may be suitable for the sophisticated control of H₂O₂ release in environmental applications.

Synthesis and characterization of stabilized oxygen-releasing CaO2 nanoparticles for bioremediation

Bioremediation is one of the general methods to treat pollutants in soil, sediment, and groundwater. However, the low concentration and restricted dispersion of dissolved oxygen (DO) in these areas have limited the efficiency of remediation especially for microorganisms that require oxygen to grow. Calcium peroxide (CaO₂) is one of the oxygen-releasing compounds and has been applied to magnify the remediation efficacy of polluting areas. In this study, CaO₂ nanoparticles (NPs) were synthesized and evaluated by wet chemistry methods as well as dry and wet grinding processes. The characteristics of CaO₂ particles and NPs were analyzed and compared by dynamic light scattering, transmission electron microscopy, scanning electron microscopy, and X-ray powder diffraction. Our results showed that wet-grinded CaO₂ NPs had an average particle size of around 110 nm and were more stable compared to other particles from aggregation and sedimentation tests. In addition, we also observed that CaO₂ NPs had better DO characteristics and patterns; these NPs generated higher DO levels than their non-grinded form. Accordingly, our results suggested that wet-grinding CaO₂ particles to nanoscale could benefit their usage in bioremediation.