Adsorptive removal of antibiotics from water over natural and modified adsorbents

Surface modified of chitosan by TiO2@MWCNT nanohybrid for the efficient removal of organic dyes and antibiotics

Considering the increase in the discharge of industrial effluents containing dyes and antibiotic resistance as a consequence of increasing the prescription and easy distribution of antibiotic drugs at the global level, designing efficient, biodegradable and non-toxic absorbents is necessary to reduce environmental harm effects. Herein, we present a series of novel eco-friendly ternary hybrid nanocomposite hydrogels CS/TiO2@MWCNT (CTM) composed of chitosan (CS), TiO2, and multiwalled carbon nanotube (MWCNT) for removal of methylene blue (MB) and methyl orange (MO) and common antibiotic ciprofloxacin (CIP) in aqueous medium. The combination of MWCNT and TiO2 improves the physicochemical properties of CS hydrogel and increases the adsorption capacity toward pollutants in the presence of different loadings. CTM hydrogel showed a specific surface area of 236.45 m2 g-1 with a pore diameter of 7.89 nm. Adsorption mechanisms were investigated in detail using kinetic, isotherm, and thermodynamic studies of adsorption as well as various spectroscopic techniques. Adsorption of these pollutants by CTM nanocomposite hydrogel occurred using various interactions at different pHs, which showed the obvious dependence of CTM adsorption capacity on pH. Electrostatic attractions, complex formation, π-π stacking and hydrogen bonds played a key role in the adsorption process. The adsorption of MB, MO, and CIP was fitted with the Langmuir isotherm with maximum adsorption capacities of 531.91, 1763.6, and 1510.5 mg g-1, respectively. CTM had a minor decrease in adsorption strength and showed good structural stability even after 8 adsorptions-desorption cycles. The total cost of producing a 1 kg adsorbent was calculated to be $ 450, which helped us determine the economic feasibility of the adsorbent in large-scale applications.

Fungal Bioremediation of the β-Lactam Antibiotic Ampicillin under Laccase-Induced Conditions

Due to widespread overuse, pharmaceutical compounds, such as antibiotics, are becoming increasingly prevalent in greater concentrations in aquatic ecosystems. In this study, we investigated the capacity of the white-rot fungus, Coriolopsis gallica (a high-laccase-producing fungus), to biodegrade ampicillin under different cultivation conditions. The biodegradation of the antibiotic was confirmed using high-performance liquid chromatography, and its antibacterial activity was evaluated using the bacterial growth inhibition agar well diffusion method, with Escherichia coli as an ampicillin-sensitive test strain. C. gallica successfully eliminated ampicillin (50 mg L-1) after 6 days of incubation in a liquid medium. The best results were achieved with a 9-day-old fungal culture, which treated a high concentration (500 mg L-1) of ampicillin within 3 days. This higher antibiotic removal rate was concomitant with the maximum laccase production in the culture supernatant. Meanwhile, four consecutive doses of 500 mg L-1 of ampicillin were removed by the same fungal culture within 24 days. After that, the fungus failed to remove the antibiotic. The measurement of the ligninolytic enzyme activity showed that C. gallica laccase might participate in the bioremediation of ampicillin.

Precursor-oriented design of nano-alumina for efficient removal of antibiotics

Rapid and efficient removal of environmental antibiotics is vital to curb bacterial resistance. Through rational precursors-oriented design, we attain the best Al2O3 absorbent by 500 °C calcination of ammonium aluminium carbonate hydroxide (AACH) precursor from NH4HCO3 route (AACH-NH4HCO3-500) for fast and efficient removal of tetracycline (TC) and other antibiotics from environmental waters including high-salinity wastewater. AACH-NH4HCO3-500 (0.25 g·L-1) can remove (69.92 ± 1.78)% of aqueous TC (0.025 g·L-1) within 5 min and (97.62 ± 2.75)% within 2 h, and the adsorption capacity is 444.4 mg·g-1, which is the highest qmax of TC for the 2 h-adsorptions among numerous adsorbents. AACH-NH4HCO3-500 has fine tolerance to the coexisting substances, and can be easily regenerated and reused, and has no harm even discarded. The relations among the synthetic methods, the structural features, and the adsorption functions of Al2O3 are disclosed through a systematic comparison of the commercial Al2O3 and different Al2O3 nanomaterials attained from three precursors produced by five different routes. The reasons behind the exceptional adsorption performance are discussed throughout. Our findings would facilitate the development of excellent adsorbents for removal of other pollutants.

Enhanced Adsorptive Removal of Tetracycline by Phosphomolybdic Acid-Modified Low-Temperature Sludge Biochar

Increasing the adsorption capacity and reducing the energy consumption of sludge biochar during preparation is important. In this study, a new modification method was developed to prepare phosphomolybdic acid-modified sludge biochar through the low-temperature pyrolysis of sewage sludge using phosphomolybdic acid as a modifier. Tetracycline was used to assess the adsorption performance of sludge biochar, and phosphomolybdic acid-modified sludge biochar was prepared at different temperatures. The results showed that the adsorption capacity of sludge biochar improved from 84.49 to 120.86 mg/g through modification with phosphomolybdic acid at 200 °C. The maximum adsorption capacities of phosphomolybdic acid-modified sludge biochar (200 °C pyrolysis temperature) at 298, 308, and 318 K were 283.87, 421.39, and 545.48 mg/g, respectively. Both liquid film and intraparticle diffusion were the main rate-limiting steps of tetracycline adsorption by phosphomolybdic acid-modified sludge biochar. Furthermore, the adsorption of tetracycline by phosphomolybdic acid-modified sludge biochar was mainly attributed to π-π interactions, electrostatic interactions, hydrogen bonding, and pore filling.

Effective adsorption of amoxicillin by using UIO-66@ Cr-MIL-101 nanohybrid: isotherm, kinetic, thermodynamic, and optimization by central composite design

In this research, the amoxicillin (AMX) removal was studied on a prepared nanosorbent from MOFs. The aim of this research work is to prepare nanohybrids based on metal-organic frameworks (MOFs) as an efficient nanosorbent for the absorption of amoxicillin drug. In this study, UIO-66 nanoparticles (UIO-66 NPs) were prepared from Zirconium (Zr) metal and 1,4-benzene dicarboxylic acid (BDC). Then UIO-66@Cr-MIL-101 nanohybrid was synthesized by hydrothermal method. Structural and physicochemical properties of nanohybrid UIO-66@Cr-MIL-101 were characterized by different analyses such as X-ray diffraction analysis (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), therapeutic goods administration (TGA), and Brunauer-Emmett-Teller (BET). The effect of four fundamental variables effective on adsorption was optimized by the central composite response surface methodology (CCRSM). This parameters including loading percentage of Cr-MIL-101 NPs (10-30%), initial concentration of AMX (20-140 mg L-1), contact time (20-60 min), and pH (20-10). The removal percentage (Re%) of AMX equal to 99.50% was obtained under the following conditions: The loading value of 20% Wt%, the initial concentration of AMX 80 mg L-1, contact time 20 min, and pH = 6. Also, the experimental data were investigated with famous kinetic models and isotherms, and it was observed that AMX removal by nanohybrid is correlated with the PSO kinetic model and Langmuir isotherm.

Carbon-based materials as efficient adsorbents for the removal of antibiotics: The real contributions of carbon edge sites

Disclosing the effect of edge defects in carbon-based materials on antibiotic removal remains a great challenge. In this study, carbon-based adsorbents (DC-s) with different degrees of edge defects were synthesized on a large scale via a direct calcination of sodium citrate (SC) and their adsorption performance to antibiotics were explored. The experimental results suggested that the edge defects of DC-s samples were the active sites for the adsorption of tetracycline (TC) and norfloxacin (NOR). The adsorption capacity of the optimal sample DC-900 for TC and NOR was 155.8 and 168.0 mg g-1, respectively. Density functional theory (DFT) calculations further revealed that zigzag edge defects rather than armchair edge defects were crucial to the excellent adsorption performance of DC-s samples for antibiotics, and the natures for the difference in the adsorption performance of the two edge defects for antibiotics were their different electronic structures. In addition, DC-900 also showed stable adsorption efficiency for antibiotics in the interferences, dynamic adsorption, and cycle experiments, suggesting its good environmental application potential. This study provides new insight into clarifying the natures of edge defects with carbon-based adsorbents for high-efficiency removal of antibiotics, which may guide the exploration of cost-effective carbon-based adsorbents.

Heterogeneous photo-Fenton catalyst α-Fe2O3@g-C3N4@NH2-MIL-101(Fe) with dual Z-Scheme heterojunction for degradation of tetracycline

A novel photo-Fenton catalyst α-Fe2O3@g-C3N4@NH2-MIL-101(Fe) (FGN) with dual Z-scheme heterojunction was successfully prepared by hydrothermal method to degrade tetracycline (TC). The preparation conditions were optimized by orthogonal test, and the successful synthesis was confirmed by characterization analyses. The prepared FGN showed better light absorption performance, higher photoelectrons-holes separation efficiency, lower photoelectrons transfer resistance, and higher specific surface area and pore capacity compared with α-Fe2O3@g-C3N4 and α-Fe2O3. The effects of experimental conditions on the catalytic degradation of TC were investigated. The degradation rate of 10 mg/L TC could reach 98.33% within 2 h when the dosage of FGN was 200 mg/L, and the degradation rate could remain 92.27% after 5 times of reuse. Furthermore, the XRD spectra and XPS spectra of FGN before and after reuse were compared to explore the structural stability and catalytic active sites of FGN, respectively. According to the identification of oxidation intermediates, three degradation pathways of TC were proposed. Through H2O2 consumption experiment, radical-scavenging experiments, EPR results, the mechanism of the dual Z-scheme heterojunction was proved. The improved performance of FGN was attributed to the dual Z-Scheme heterojunction effectively promoting the separation of photogenerated electrons from the holes and accelerating the electrons transfer, and the increase of the specific surface area.

New chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole antibiotics in water

This study aims to develop a new chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole (SMX) antibiotics in water. Biochar was prepared from orange peel (OB) and spent coffee grounds (SCB). To fabricate chitosan-biochar composites, chitosan and biochar were crosslinked with glutaraldehyde. Results showed that pH, adsorbent dosage, time, temperature, and initial concentrations have a significant impact on the SMX adsorption. The adsorption data was better described by Langmuir (with good regression) than Freundlich model. The highest adsorption capacity (Q_max) of SMX on OB, SCB, CTS-OB, and CTS-SCB were 3.49, 7.65, 7.24, and 14.73 mg/g, respectively. The Freundlich constant (K_F) values for adsorption capacity were 1.66, 1.91, 2.57, and 5.57 (mg^1-nLⁿ/g), respectively, for OB, SCB, CTS-OB, and CTS-SCB. Ion exchange, π bonding, hydrogen bonding and pore filling, were proposed as dominant mechanisms of SMX removal process.

Preparation of Nanocellulose-Based Aerogel and Its Research Progress in Wastewater Treatment

Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.

Functional Bimetal/Carbon Composites Co/Zr@AC for Pesticide Atrazine Removal from Water

Atrazine is a toxic and refractory herbicide that poses threats to human health and the ecological environment. In order to efficiently remove atrazine from water, a novel material, Co/Zr@AC, was developed. This novel material is prepared by loading two metal elements, cobalt and zirconium, onto activated carbon (AC) through solution impregnation and high-temperature calcination. The morphology and structure of the modified material were characterized, and its ability to remove atrazine was evaluated. The results showed that Co/Zr@AC had a large specific surface area and formed new adsorption functional groups when the mass fraction ratio of Co²⁺:Zr⁴⁺ in the impregnating solution was 1:2, the immersion time was 5.0 h, the calcination temperature was 500 °C, and the calcination time was 4.0 h. During the adsorption experiment on 10 mg/L atrazine, the maximum adsorption capacity of Co/Zr@AC was shown to be 112.75 mg/g and the maximum removal rate was shown to be 97.5% after 90 min of the reaction at a solution pH of 4.0, temperature of 25 °C, and Co/Zr@AC concentration of 60.0 mg/L. In the kinetic study, the adsorption followed the pseudo-second-order kinetic model (R² = 0.999). The fitting effects of Langmuir and Freundlich isotherms were excellent, indicating that the process of Co/Zr@AC adsorbing atrazine also conformed to two isotherm models, so the adsorption of atrazine by Co/Zr@AC had multiple effects including chemical adsorption, mono-molecular layer adsorption, and multi-molecular layer adsorption. After five experimental cycles, the atrazine removal rate was 93.9%, indicating that Co/Zr@AC is stable in water and is an excellent novel material that can be used repeatedly.

Adsorptive removal of antibiotic pollutants from wastewater using biomass/biochar-based adsorbents

This study explores adsorptive removal measures to shed light on current water treatment innovations for kinetic/isotherm models and their applications to antibiotic pollutants using a broad range of biomass-based adsorbents. The structure, classifications, sources, distribution, and different techniques for the remediation of antibiotics are discussed. Unlike previous studies, a wide range of adsorbents are covered and adsorption of comprehensive classes of antibiotics onto biomass/biochar-based adsorbents are categorized as β-lactam, fluoroquinolone, sulfonamide, tetracycline, macrolides, chloramphenicol, antiseptic additives, glycosamides, reductase inhibitors, and multiple antibiotic systems. This allows for an assessment of their performance and an understanding of current research breakthroughs in applying various adsorbent materials for antibiotic removal. Distinct from other studies in the field, the theoretical basis of different isotherm and kinetics models and the corresponding experimental insights into their applications to antibiotics are discussed extensively, thereby identifying the associated strengths, limitations, and efficacy of kinetics and isotherms for describing the performances of the adsorbents. In addition, we explore the regeneration of adsorbents and the potential applications of the adsorbents in engineering. Lastly, scholars will be able to grasp the present resources employed and the future necessities for antibiotic wastewater remediation.

Identification of the aged microplastics film and its sorption of antibiotics and bactericides in aqueous and soil compartments

Here, thin-film microplastics (MPs) from black garbage bags were simulated aged by artificially ultraviolet radiation, and their sorption behavior toward antibiotics and bactericides in water and soil was explored. The chemical structure, surface functional groups, and the aged degree indicators of the identified polyethylene microplastics (PE-MPs) were studied by FT-IR spectra. The decreased crystallinity and hydrophobicity of PE-MPs-16 demonstrated by XRD and contact angle measurements and enhanced carbonyl index (0.0105) were highly related to the enhanced sorption capacities, especially for crystal violet (18.10 mg/g) in water. Moreover, PE-MPs-16 mitigated the adsorption rate and had little influence on the sorption capacity in soil. The sorption data fitted well to Henry (water) or Freundlich (soil) isotherm model, indicating the hydrophobic partition was involved in the sorption. Our research helps to clarify the interaction between MPs and organic pollutants and better understand the fate of virgin and aged PE-MPs in the varied compartments.

Study on Metronidazole Acid-Base Behavior and Speciation with Ca2+ for Potential Applications in Natural Waters

Metronidazole (MNZ) is an antibiotic widely used for the treatment of various infectious diseases and as an effective pesticide agent for the cultivation of chickens and fish. Its high resistance to purification processes and biological activity has led to the classification of MNZ as an emerging contaminant. A speciation study, aimed to define the acid-base properties of MNZ and its interaction with Ca²⁺, commonly present in natural waters, is reported. The protonation constants of MNZ, as well as the formation constant value of Ca²⁺-MNZ species, were obtained by potentiometric titrations in an aqueous solution, using NaCl as background salt at different ionic strengths (0.15, 0.5, 1 mol L⁻¹) and temperature (15, 25 and 37 °C) conditions. The acid-base behavior and the complexation with Ca²⁺ were also investigated by ¹H NMR and UV-Vis titrations, with results in very good agreement with the potentiometric ones. The dependence of the formation constants on the ionic strength and temperature was also determined. The sequestering ability of MNZ towards Ca²⁺ was defined by the empirical parameter pL_0.5 at different pH and temperature values. The speciation of MNZ simulating sea water conditions was calculated.

Adsorption performance of tetracycline on NiFe layered double hydroxide hollow microspheres synthesized with silica as the template

Tetracycline (TC) has poor degradability and hepatotoxicity which will increase the burden on the aquatic environment when discharged into lakes in large quantities. LDH materials are often used as adsorbents because of their superior surface area and controllability of morphology. Herein, NiFe LDH hollow microspheres (NFHMS) were synthesized by a facile hydrothermal method. The removal of tetracycline by the as-prepared material in an aquatic environment was systematically investigated through comprehensive characterizations. The NFHMS sample presents a larger specific surface area than the two control samples, which contributes to its higher adsorption performance. The adsorption mechanisms of TC on NFHMS is mainly electrostatic adsorption. The fitting results of experimental data coincide well with pseudo-second-order and Weber-Morris models through kinetic simulation. Moreover, the Langmuir model is verified to be more suitable than the Freundlich model in elucidating molecular surface adsorption, and the maximum adsorption capacity of NFHMS obtained from the Langmuir model is 90.9 mg g^-1. Higher temperature is beneficial to improve the adsorption performance, and the adsorption process is spontaneous and endothermic. The initial pH of the solution will affect the adsorption capacity, and the partial neutral condition is more favorable. In addition, NFHMS sample exhibits good stability in cyclic tests. Therefore, NFHMS material is expected to be a very promising adsorbent for treating tetracycline in wastewater.

Efficient ofloxacin degradation via photo-Fenton process over eco-friendly MIL-88A(Fe): Performance, degradation pathways, intermediate library establishment and toxicity evaluation

The high-throughput production of the eco-friendly MIL-88A(Fe) was achieved under mild reaction conditions with normal pressure and temperature. The as-prepared MIL-88A(Fe) exhibited efficient photo-Fenton catalytic ofloxacin (OFL) degradation upon visible light irradiation with good stability and reusability. The OFL (20.0 mg/L) was completely degraded within 50 min under visible light with the aid of MIL-88A(Fe) (0.25 g/L) and H₂O₂ (1.0 mL/L) in aqueous solution (pH = 7.0). The hydroxyl radicals (·OH) are the main active species during the photo-Fenton oxidation process. Meanwhile, the degradation intermediates and the corresponding degradation pathways were identified and proposed with the aid of both ultra-high performance liquid chromatography tandem quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS) and density functional theory (DFT) calculations. Finally, the degradation product library was firstly established to identify intermediate transformation products (TPs) with their variation of concentration, and their corresponding toxicologic activities were assessed via Toxtree and T.E.S.T software as well. Finally, the MIL-88A is efficient and stable with four cycles' catalysis operations, demonstrating good potential for water treatment.

Green synthesis of Ag2O nanoparticles using Punica granatum leaf extract for sulfamethoxazole antibiotic adsorption: characterization, experimental study, modeling, and DFT calculation

Silver oxide (Ag₂O) nanoparticles (NPs) were generated by synthesizing green leaf extract of Punica granatum, and afterwards they were used as adsorbent to remove the antibiotic additive sulfamethoxazole (SMX) from aqueous solutions. Prior of their use as adsorbent, the Ag₂O NPs were characterized by various methods such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), scanning electron microscopy/energy-dispersive X-ray (SEM-EDX), and transmission electron microscopy (TEM). The Ag₂O NPs were found to be spherically shaped and stabilized by the constituents of the extract. Further, at SMX antibiotic concentration of 100 mg L^-1, the Ag₂O NPs achieved almost complete removal of 98.93% within 90 min, and by using 0.8 g L^-1 of adsorbent dose at pH=4 and temperature T=308 K. In addition, the experimental data were well fitted with the theoretical Langmuir model indicating homogeneous adsorbed layer of the SMX antibiotic on the Ag₂O NPs surface. The maximum uptake capacity was 277.85 mg g^-1. A good agreement was also found between the kinetic adsorption data and the theoretical pseudo-second-order model. Regarding the thermodynamic adsorption aspects, the data revealed an endothermic nature and confirmed the feasibility and the spontaneity of the adsorption reaction. Furthermore, the regeneration study has shown that the Ag₂O NPs could be efficiently reused for up to five cycles. The geometric structures have been optimized and quantum chemical parameters were calculated for the SMX unprotonated (SMX^+/-) and protonated (SMX⁺) using density functional theory (DFT) calculation. The DFT results indicated that the unprotonated SMX^+/- reacts more favorably on the Ag₂O surface, as compared to the protonated SMX⁺. The SMX binding mechanism was predominantly controlled by the electrostatic attraction, hydrogen bond, hydrophobic, and π-π interactions. The overall data suggest that the Ag₂O NPs have promising potential for antibiotic removal from wastewater.

Adsorption of levofloxacin on natural zeolite: effects of ammonia nitrogen and humic acid

The persistence of antibiotics in sewage treatment plants in recent years has become a serious problem. Meanwhile, humic acid and ammonia nitrogen are widely distributed in natural reservoirs and might influence the sorption, migration and transformation of antibiotics. In this study, natural zeolite (NZ) was evaluated as an adsorbent for the removal of levofloxacin (LEV). The physical and chemical properties of NZ before and after adsorption were characterized by various analytical techniques to develop the mechanism. The effects of ammonia nitrogen and humic acid (HA) on the interfacial behavior of LEV on NZ were explored. Comparative experiments revealed that LEV adsorption on NZ involved electrostatic interactions and ion exchange, and the adsorption processes were well fitted by the Langmuir isotherm model and pseudosecond-order kinetic model. The maximum experimental adsorption capacity of LEV was 22.17 mg·g^-1 at pH 6.5. The presence of ammonia nitrogen and HA significantly suppressed the adsorption of LEV due to competitive adsorption, and the adsorption capacity decreased 58 and 46%, respectively. It is obvious that low concentrations of ammonia nitrogen and HA are conducive to improving the treatment effect of sewage. This study demonstrates that NZ is a promising and efficient material for LEV adsorption.

Facile Synthesis of MOFs-Templated Carbon Aerogels with Enhanced Tetracycline Adsorption Performance

Three-dimensional aerogels have great potential for antibiotic removal from aqueous solution due to their excellent solution mass transfer channels and special morphology. Herein, the metal ions were bound with alginate to form alginate-Fe, alginate-Cu, and alginate-Fe-Cu hydrogels, then they were used as nucleation sites for metal organic framework (MOF) growth to obtain MAlgs gels, respectively. Considering the aqueous environmental stability of MOFs particles, the alginate and MOF particles in MAlgs aerogels were pyrolyzed as templates to obtain the derived carbon aerogel CMAlgs. The results showed that the adsorption capacity of MAlgs-Fe-Cu aerogel was higher than that of MAlg-Cu and MAlg-Fe aerogels, up to ~130 mg·g−1. The adsorption performance of carbon aerogel CMAlg-Cu decreased obviously because of the decrease of pore size and oxygen-containing functional groups. The adsorption process is a combination of physical adsorption and chemical adsorption. In addition, CMAlgs aerogels exhibit better recyclability than MAlgs aerogels. This work provides a new strategy for fabricating MOFs-templated in-situ grown carbon aerogels for water purification.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Effective removal of tetracycline antibiotics from wastewater using practically applicable iron(III)-loaded cellulose nanofibres

The non-toxic and completely biodegradable cellulose within bamboo is one of the most abundant agricultural polysaccharide wastes worldwide, and can be processed into cellulose nanofibres (CNFs). Iron(III)-loaded CNFs (Fe(III)@CNFs) derived from bamboo were prepared to improve the adsorption of tetracycline (TC), chlortetracycline (CTC) and oxytetracycline (OTC) from an aqueous solution. The preparation conditions of Fe(III)@CNFs suitable for the simultaneous adsorption of three tetracycline antibiotics (TCs) were investigated. Various analyses proved the abundance of oxygen-containing functional groups and the existence of Fe(III) active metal sites in Fe(III)@CNFs. In batch experiments, Fe(III)@CNFs were applied under a wide pH range and the maximum adsorption capacities were 294.12, 232.56 and 500.00 mg g-1 (for TC, CTC and OTC, respectively). In addition, different concentrations and types of coexisting anions have a weak effect on TCs adsorption. The original TCs adsorption capacities of Fe(III)@CNFs remained stable (greater than 92%) after five cycles when UV + H2O2 was used as the regeneration method. Four adsorption mechanisms (surface complexation, hydrogen bonding, electrostatic interaction and van der Waals force) were obtained for the endothermic adsorption of TCs, among which surface complexation between Fe(III) and TCs always dominates. The practically applicable Fe(III)@CNFs adsorbents are promising for TCs enrichment and remediation in engineering applications.

Enhanced adsorption capacity of tetracycline on tea waste biochar with KHCO3 activation from aqueous solution

Activation is an important pathway that can enhance the adsorption capacity of biochar. In this study, a modified tea waste biochar (MTWBC) was prepared via a two-step pyrolysis approach with KHCO₃ activation. Pristine tea waste biochar (TWBC) was also produced as control via one-step pyrolysis without activation. Various characterizations were undertaken to investigate the influence of modification on the morphology, composition, carbon structure, surface area, and functional group of biochar, including scanning electron microscope (SEM), surface area and pore analyzer, element analysis, point of zero charge (pH_PZC), X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). After KHCO₃ activation treatment, the surface area, total pore volume, and micropore volume of MTWBC reached 1981 m²·g^-1, 0.8547 cm³·g^-1, and 0.6439 cm³·g^-1 which were 7.34-fold, 7.27-fold, and 7.30-fold increases, respectively, compared with TWBC. The aromaticity, hydrophilicity, and polarity of the MTWBC increased after modification. More graphitization with less defective structures occurred in MTWBC after modification. The C-, O-, and N-containing groups in MTWBC also changed after the reaction of KHCO₃. The pseudo-second-order and Freundlich models best described the adsorption process on biochar. The maximum adsorption capacity of tetracycline (TC) on MTWBC reached 293.46 mg·g^-1, which was 15-fold more than that of TWBC (19.68 mg·g^-1). An alkaline environment decreased the TC adsorption on biochars. The presence of Na⁺, K⁺, Ca²⁺, and Mg²⁺ inhibited TC adsorption onto biochars. The influence of Cu²⁺ on TC adsorption by biochars depends on its initial concentration. The enhanced adsorption capacity of TC on MTWBC was mainly attributable to the large surface area, the improved pore volume, and more aromatic structure. The adsorption mechanism was based on pore filling and π-π EDA interaction. Therefore, KHCO₃ activated biochar has the potential to remove TC from aquatic environments.

Performance and mechanism of hydrogen sulfide removal by sludge-based activated carbons prepared by recommended modification methods

The sludge-based activated carbons (SACs) were prepared by sewage sludge and corn straw and modified by ferric nitrate. The H₂S removal performance and the desulfurization mechanism of the modified SAC were studied. Results showed that breakthrough sulfur capacity and saturation sulfur capacity of the SAC prepared by recommended modification were 27.209 mg/g and 48.098 mg/g, which were as 4.68 times and 7.02 times larger as those before modification, respectively. Additionally, results showed that the desulfurization products of unmodified SAC were mainly sulfur, while that of modified SAC were mainly sulfate. These results indicated that ferric nitrate modification changed the way of hydrogen sulfide removal by SAC: the desulfurization process of unmodified SAC can be expressed as S^2- → S⁰ → S⁴⁺ → S⁶⁺, and the oxidative active component was dominated by O*, while that of modified SAC can be expressed as S^2- → S⁰ → S⁶⁺, and the oxidative active components are both Fe³⁺ and O*.

Enhancing biochar sorption properties through self-templating strategy and ultrasonic fore-modified pre-treatment: Characteristic, kinetic and mechanism studies

The traditional anaerobic sewage treatment facilities are unsuitable for the widely uncontrolled spread of antibiotic residues in hospital or on livestock farm, which have raised the risk levels of high concentrations of antibiotic residues leakages and seriously threatened the aquatic ecology safeties. Thus, to develop an effective adsorbent with safe, low cost, and high firmly adsorptive capacity are imminent required. In this investigated, a self-templating hydrothermal alkali fore-modified & ultrasonic treatment was developed to achieve the highly adsorptive capacity and low desorption rate of biochar. As expected, the prepared biochar adsorbents present plenty of surface functional groups and micro pores. The BET value is raised up 1452 cm²·g^-1 for biochar treated by the associated alkali fore-modified and ultrasonic treatment (UFB), whereas it is only 415.8 cm²·g^-1 for the biochar treated by traditional carbonization (AC) and 1205 cm²·g^-1 for the biochar by further hydrothermal alkali fore-modification (FB). Congruously, UFB exhibits the removal abilities of 397.70 mg·g^-1 of levofloxacin (LEV) and 320.99 mg·g^-1 of chlorotetracycline (CTC), 3.5-6.3 times absorbability towards familiar antibiotics than traditional biochar. Moreover, the corresponding the lowest desorption of 1.30 mg·g^-1 (LEV) and 0.43 mg·g^-1 (CTC) mg·g^-1 by UFB have been confirmed. Meanwhile, Furthermore, both the adsorption and desorption mechanisms have been addressed by kinetic studies, pore width distributions, XPS and FTIR surveys. It is proposed the fore-modified treatment is more helpful for carbon functionalization while the ultrasonic treatment dedicates to the largely microporous structures. Consequently, the adsorption's capacity and stability of UFB adsorbents is large promoted due to its more micro- and meso-porous structure through a jointly hydrothermal alkali fore-modified and ultrasonic treatment. The present investigation will provide a novel alternative preparation strategy of the highly efficient adsorbent for emergency medical wastewater treatment.

Developing a high-quality catalyst from the pyrolysis of anaerobic granular sludge: Its application for m-cresol degradation

This study proposes a novel approach for utilizing granular sludge discharged from anaerobic reactors to prepare an effective and stable catalyst for the removal of refractory contaminants in catalytic wet peroxide oxidation (CWPO). By implementing the response surface methodology, the experimental conditions for m-cresol degradation in CWPO with a HNO₃-modified sludge carbon (GSC-M) as catalyst were explored. The removal efficiencies for m-cresol and total organic carbon (TOC) were 100% and 91.4%, respectively, at the optimal conditions of 60 °C for 120 min with a pH of 3, H₂O₂ dosage of 1.85 g/L, and catalyst dosage of 0.75 g/L. A continuous experiment was conducted for 6 d to investigate the durability and catalytic performance of GSC-M, resulting in a TOC removal above 90% with the catalyst maintaining its original morphology. GSC-M catalyst exhibited excellent stability and low iron leaching (0.34%). The high catalytic degradation could be attributed to a high content of iron species, various types of surface functional groups, porous structures, and the π-π interaction between aromatic clusters in sludge carbon and the benzene ring of m-cresol. Interestingly, GSC-M catalyst exhibited magnetic properties which are beneficial for recycling. Based on the identified intermediates, a possible degradation pathway of m-cresol was proposed.

Efficient removal of tylosin by nitrogen-doped mesoporous carbon nanospheres with tunable pore sizes

Efficient and selective removal of antibiotics from wastewater is quite important but challenging. In this work, the nitrogen-doped mesoporous carbon nanospheres (NMCN) with different pore size (from 2.67 to 4.62 nm) were successfully prepared by changing the hydrothermal condition, and their removal performance on tylosin was evaluated. The adsorption experimental data were fitted well with the pseudo-second-order kinetic model. Besides, Langmuir isotherm model could better describe the adsorption process. Notably, the NMCN with medium pore size (3.36 nm) exhibited the highest adsorption capacity (1333 mg g^-1), which was 24% and 14% higher than that of NMCNs with smaller and larger pore size, respectively. In order to study the adsorption mechanism, the mesoporous carbon nanospheres without N-doped was prepared, and the comparison of nitrogen adsorption-desorption isotherms was conducted. The result proved that in addition to the modified surface property, large specific surface area, and high pore volume, the pore size could precisely influence the adsorption performance of the proposed adsorbent. Furthermore, the proposed NMCN material possessed a selective adsorbing ability toward tylosin in the presence of tetracycline. Clearly, the NMCN was a promising alternative to be used as high efficient and selective adsorbent in practical environment pollution treatment, especially in large-size molecule adsorption.

A composite of clay, cement, and wood as natural support material for the immobilization of commercial titania (P25, P90, PC500, C-TiO2) towards photocatalytic phenol degradation

Different types of commercial titania (P25, P90, PC500, and C-TiO₂) were immobilized as single or mixed photocatalyst onto the surface of a natural support material made of cement, clay, and wood fibers. The successful immobilization was studied by different techniques showing a composite material with the mechanical properties of the support material and the photocatalytic behavior of the immobilized titania. The supported photocatalyst showed high mechanical stability and was applied to the photocatalytic degradation of phenol as a model pollutant under UV light irradiation. As the most active photocatalytic material, a mixture PC500 and P90 (comp-PC500/P90) was identified with an apparent pseudo first-order kinetic rate constant (k_app) of 0.010 min^-1 at a degradation efficiency of 100%. The catalyst was used several times and showed minor loss in activity during four runs due to degradation intermediates adsorbed to the surface, shown by a color change from white to yellow.