Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production

Carotenoids dispersed in gypsum rock as a result of algae adaptation to the extreme conditions of the Atacama Desert

The high-altitude pre-Andean region of the Atacama Desert is characterized by its stark volcanic rock formations and unique hydrothermal gypsum outcrops (gypcrete) that it hosts. This study delves into the biomolecular composition of the endolithic phototrophic microbes that thrive within these gypcretes. Using advanced Raman spectroscopy techniques, including Raman imaging (complemented by microscopic and 3D microscopic observations), herein we unveil new insights into the adaptive strategies of these gypsum-inhabiting algae. Our Raman imaging results provide a detailed chemical map of carotenoids associated with microbial colonization. This map reveals a significant gradient in pigment content, highlighting a critical survival mechanism for algae and cyanobacteria in this polyextreme environment. Intriguingly, we detected signals for carotenoids not only in the algae-colonized layer, but also deeper within the gypsum matrix - indicating pigment migration following cell disruption. In addition, we conducted an in-depth analysis of individual algal cells from the Trebouxiaceae family, noting their color variations from green to orange, plus describing the spectral differences in detail. This investigation identified in-vivo pigments (carotenoids, chlorophyll) and lipids at the cellular level, offering a comprehensive view of the molecular adaptations enabling life in one of the Earth's most extreme habitats.

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

Exploring Extremotolerant and Extremophilic Microalgae: New Frontiers in Sustainable Biotechnological Applications

Exploring extremotolerant and extremophilic microalgae opens new frontiers in sustainable biotechnological applications. These microorganisms thrive in extreme environments and exhibit specialized metabolic pathways, making them valuable for various industries. The study focuses on the ecological adaptation and biotechnological potential of these microalgae, highlighting their ability to produce bioactive compounds under stress conditions. The literature reveals that extremophilic microalgae can significantly enhance biomass production, reduce contamination risks in large-scale systems, and produce valuable biomolecules such as carotenoids, lipids, and proteins. These insights suggest that extremophilic microalgae have promising applications in food, pharmaceutical, cosmetic, and biofuel industries, offering sustainable and efficient alternatives to traditional resources. The review concludes that further exploration and utilization of these unique microorganisms can lead to innovative and environmentally friendly solutions in biotechnology.

Effective cultivation conditions and safety evaluation of filamentous cyanobacteria producing phycocyanins with antiglycation activities

We investigated suitable culture conditions for the production of the blue pigment phycocyanin (PC) from the unique filamentous cyanobacteria Pseudanabaena sp. ABRG5-3 and Limnothrix sp. SK1-2-1. White, green, or red LED irradiation at 30 μmol photons/m2/s was effective for phycocyanin production when compared with Arthrospira platensis (Spirulina) sp. NIES-39, which is generally grown under high light irradiation. To investigate the safety of the cyanobacteria, ABRG5-3 cells were subjected to Ames (reverse mutation) tests and single oral-dose rat studies, which revealed non-mutagenic and non-toxic properties. When three purified phycocyanins (abPC, skPC, and spPC) were subjected to agarose gel electrophoresis, they showed different mobility, indicating that each phycocyanin has unique properties. abPC exhibited strong antiglycation activities as novel function.

Screening Stability, Thermochemistry, and Chemical Kinetics of 3-Hydroxybutanoic Acid as a Bifunctional Biodiesel Additive

The thermo-kinetic aspects of 3-hydroxybutyric acid (3-HBA) pyrolysis in the gas phase were investigated using density functional theory (DFT), specifically the M06-2X theoretical level in conjunction with the cc-pVTZ basis set. The obtained data were compared with benchmark CBS-QB3 results. The degradation mechanism was divided into 16 pathways, comprising 6 complex fissions and 10 barrierless reactions. Energy profiles were calculated and supplemented with computations of rate coefficients and branching ratios over the temperature range of 600-1700 K at a pressure of 1 bar using transition state theory (TST) and Rice-Ramsperger-Kassel-Marcus (RRKM) methods. Thermodynamics results indicated the presence of six stable conformers within a 4 kcal mol-1 energy range. The estimated chemical kinetics results suggested that TST and RRKM approaches are comparable, providing confidence in our calculations. The branching ratio analysis reveals that the dehydration reaction pathway leading to the formation of H2O and CH3CH═CHCO2H dominates entirely at T ≤ 650 K. At these temperatures, there is a minor contribution from the simple homolytic bond fission reaction, yielding related radicals [CH3•CHOH + •CH2CO2H]. However, at T ≥ 700 K, this reaction becomes the primary decomposition route. At T = 1700 K, there is a minor involvement of a reaction pathway resulting in the formation of CH3CH(OH)•CH2 + •CHO(OH) with an approximate contribution of 16%, and a reaction leading to [•CH3 + •CH2OHCH2CO2H] with around 9%.

Application of microbial resources in biorefineries: Current trend and future prospects

The recent growing interest in sustainable and alternative sources of energy and bio-based products has driven the paradigm shift to an integrated model termed "biorefinery." Biorefinery framework implements the concepts of novel eco-technologies and eco-efficient processes for the sustainable production of energy and value-added biomolecules. The utilization of microbial resources for the production of various value-added products has been documented in the literatures. However, the appointment of these microbial resources in integrated resource management requires a better understanding of their status. The main of aim of this review is to provide an overview on the defined positioning and overall contribution of the microbial resources, i.e., algae, fungi and bacteria, for various bioprocesses and generation of multiple products from a single biorefinery. By utilizing waste material as a feedstock, biofuels can be generated by microalgae while sequestering environmental carbon and producing value added compounds as by-products. In parallel, fungal biorefineries are prolific producers of lignocellulose degrading enzymes along with pharmaceutically important novel products. Conversely, bacterial biorefineries emerge as a preferred platform for the transformation of standard cells into proficient bio-factories, developing chassis and turbo cells for enhanced target compound production. This comprehensive review is poised to offer an intricate exploration of the current trends, obstacles, and prospective pathways of microbial biorefineries, for the development of future biorefineries.

Clustered Regularly Interspaced Short Palindromic Repeat/CRISPR-Associated Protein and Its Utility All at Sea: Status, Challenges, and Prospects

Initially discovered over 35 years ago in the bacterium Escherichia coli as a defense system against invasion of viral (or other exogenous) DNA into the genome, CRISPR/Cas has ushered in a new era of functional genetics and served as a versatile genetic tool in all branches of life science. CRISPR/Cas has revolutionized the methodology of gene knockout with simplicity and rapidity, but it is also powerful for gene knock-in and gene modification. In the field of marine biology and ecology, this tool has been instrumental in the functional characterization of 'dark' genes and the documentation of the functional differentiation of gene paralogs. Powerful as it is, challenges exist that have hindered the advances in functional genetics in some important lineages. This review examines the status of applications of CRISPR/Cas in marine research and assesses the prospect of quickly expanding the deployment of this powerful tool to address the myriad fundamental marine biology and biological oceanography questions.

Microalgae harvesting for wastewater treatment and resources recovery: A review

Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods.

Bioengineering strategies of microalgae biomass for biofuel production: recent advancement and insight

Algae-based biofuel developed over the past decade has become a viable substitute for petroleum-based energy sources. Due to their high lipid accumulation rates and low carbon dioxide emissions, microalgal species are considered highly valuable feedstock for biofuel generation. This review article presented the importance of biofuel and the flaws that need to be overcome to ensure algae-based biofuels are effective for future-ready bioenergy sources. Besides, several issues related to the optimization and engineering strategies to be implemented for microalgae-based biofuel derivatives and their production were evaluated. In addition, the fundamental studies on the microalgae technology, experimental cultivation, and engineering processes involved in the development are all measures that are commendably used in the pre-treatment processes. The review article also provides a comprehensive overview of the latest findings about various algae species cultivation and biomass production. It concludes with the most recent data on environmental consequences, their relevance to global efforts to create microalgae-based biomass as effective biofuels, and the most significant threats and future possibilities.

Trends on Chlamydomonas reinhardtii growth regimes and bioproducts

The green microalga Chlamydomonas reinhardtii is a model microorganism for several areas of study. Among the different microalgae species, it presents advantageous characteristics, such as genomes completely sequenced and well-established techniques for genetic transformation. Despite that, C. reinhardtii production is still not easily commercially viable, especially due to the low biomass yield. So far there are no reports of scientometric study focusing only on C. reinhardtii biomass production process. Considering the need for culture optimization, a scientometric research was conducted to analyze the papers that investigated the growth regimes effects in C. reinhardtii cultivation. The search resulted in 130 papers indexed on Web of Science and Scopus platforms from 1969 to December 2022. The quantitative analysis indicated that the photoautotrophic regime was the most employed in the papers. However, when comparing the three growth regimes, the mixotrophic one led to the highest production of biomass, lipids, and heterologous protein. The production of bioproducts was considered the main objective of most of the papers and, among them, biomass was the most frequently investigated. The highest biomass production reported among the papers was 40 g L-1 in the heterotrophic growth of a transgenic strain. Other culture conditions were also crucial for C. reinhardtii growth, for instance, temperature and cultivation process.

Algae-based approaches for Holistic wastewater management: A low-cost paradigm

Aquatic algal communities demonstrated their appeal for diverse industrial applications due to their vast availability, ease of harvest, lower production costs, and ability to biosynthesize valuable molecules. Algal biomass is promising because it can multiply in water and on land. Integrated algal systems have a significant advantage in wastewater treatment due to their ability to use phosphorus and nitrogen, simultaneously accumulating heavy metals and toxic substances. Several species of microalgae have adapted to thrive in these harsh environmental circumstances. The potential of algal communities contributes to achieving the United Nations' sustainable development goals in improving aquaculture, combating climate change, reducing carbon dioxide (CO2) emissions, and providing biomass as a biofuel feedstock. Algal-based biomass processing technology facilitates the development of a circular bio-economy that is both commercially and ecologically viable. An integrated bio-refinery process featuring zero waste discharge could be a sustainable solution. In the current review, we will highlight wastewater management by algal species. In addition, designing and optimizing algal bioreactors for wastewater treatment have also been incorporated.

Biostimulation of green microalgae Chlorella sorokiniana using nanoparticles of MgO, Ca10(PO4)6(OH)2, and ZnO for increasing biodiesel production

Microalgae have the potential to become the primary source of biodiesel, catering to a wide range of essential applications such as transportation. This would allow for a significant reduction in dependence on conventional petroleum diesel. This study investigates the effect of biostimulation techniques utilizing nanoparticles of Magnesium oxide MgO, Calcium hydroxyapatite Ca10(PO4)6(OH)2, and Zinc oxide ZnO to enhance the biodiesel production of Chlorella sorokiniana. By enhancing cell activity, these nanoparticles have demonstrated the ability to improve oil production and subsequently increase biodiesel production. Experimentally, each nanomaterial was introduced at a concentration of 15 mg L-1. The results have shown that MgO nanoparticles yielded the highest biodiesel production, with a recorded yield of 61.5 mg L-1. Hydroxyapatite nanoparticles, on the other hand, facilitated lipid accumulation. ZnO nanoparticles showcased a multifaceted advantage by enhancing both growth and lipid content. Thus, it is suggested that these nanoparticles can be used effectively to increase the lipid content of microalgae. These findings highlight the potential of biostimulation strategies utilizing MgO, hydroxyapatite, and zinc oxide nanoparticles to bolster biodiesel production.

Alkaline Phosphatase PhoD Mutation Induces Fatty Acid and Long-Chain Polyunsaturated Fatty Acid (LC-PUFA)-Bound Phospholipid Production in the Model Diatom Phaeodactylum tricornutum

With rapid growth and high lipid contents, microalgae have become promising environmentally friendly candidates for renewable biodiesel and health supplements in our era of global warming and energy depletion. Various pathways have been explored to enhance algal lipid production, especially gene editing. Previously, we found that the functional loss of PhoD-type alkaline phosphatase (AP), a phosphorus-stress indicator in phytoplankton, could lead to increased lipid contents in the model diatom Phaeodactylum tricornutum, but how the AP mutation may change lipid composition remains unexplored. This study addresses the gap in the research and investigates the effects of PhoD-type AP mutation on the lipid composition and metabolic regulation in P. tricornutum using transcriptomic and lipidomic analyses. We observed significantly modified lipid composition and elevated production of fatty acids, lysophosphatidylcholine, lysophosphatidylethanolamine, ceramide, phosphatidylinositol bisphosphate, and monogalactosylmonoacylglycerol after PhoD_45757 mutation. Meanwhile, genes involved in fatty acid biosynthesis were upregulated in mutant cells. Moreover, the mutant exhibited increased contents of ω-3 long-chain polyunsaturated fatty acid (LC-PUFA)-bound phospholipids, indicating that PhoD_45757 mutation could improve the potential bioavailability of PUFAs. Our findings indicate that AP mutation could influence cellular lipid synthesis and probably redirect carbon toward lipid production and further demonstrate that AP mutation is a promising approach for the development of high-value microalgal strains for biomedical and other applications.

Biotic countermeasures that rescue Nannochloropsis gaditana from a Bacillus safensis infection

The natural assemblage of a symbiotic bacterial microbiome (bacteriome) with microalgae in marine ecosystems is now being investigated as a means to increase algal productivity for industry. When algae are grown in open pond settings, biological contamination causes an estimated 30% loss of the algal crop. Therefore, new crop protection strategies that do not disrupt the native algal bacteriome are needed to produce reliable, high-yield algal biomass. Bacteriophages offer an unexplored solution to treat bacterial pathogenicity in algal cultures because they can eliminate a single species without affecting the bacteriome. To address this, we identified a highly virulent pathogen of the microalga Nannochloropsis gaditana, the bacterium Bacillus safensis, and demonstrated rescue of the microalgae from the pathogen using phage. 16S rRNA amplicon sequencing showed that phage treatment did not alter the composition of the bacteriome. It is widely suspected that the algal bacteriome could play a protective role against bacterial pathogens. To test this, we compared the susceptibility of a bacteriome-attenuated N. gaditana culture challenged with B. safensis to a N. gaditana culture carrying a growth-promoting bacteriome. We showed that the loss of the bacteriome increased the susceptibility of N. gaditana to the pathogen. Transplanting the microalgal bacteriome to the bacteriome-attenuated culture reconstituted the protective effect of the bacteriome. Finally, the success of phage treatment was dependent on the presence of beneficial bacteriome. This study introduces two synergistic countermeasures against bacterial pathogenicity in algal cultures and a tractable model for studying interactions between microalgae, phages, pathogens, and the algae microbiome.

Microalgal upgrading of the fermentative biohydrogen produced from Bacillus coagulans via non-pretreated plant biomass

BACKGROUND

Hydrogen is a promising source of alternative energy. Fermentative production is more feasible because of its high hydrogen generation rate, simple operating conditions, and utilization of various organic wastes as substrates. The most significant constraint for biohydrogen production is supplying it at a low cost with fewer impurities.

RESULTS

Leaf biomass of Calotropis procera was used as a feedstock for a dark fermentative production of hydrogen by Bacillus coagulans AH1 (MN923076). The optimum operation conditions for biohydrogen production were 5.0% substrate concentrationand pH 9.0, at 35 °C. In which the biohydrogen yield was 3.231 mmol H2/g dry biomass without any pretreatments of the biomass. A freshwater microalga Oscillatroia sp was used for upgrading of the produced biohydrogen. It sequestrated 97 and 99% % of CO2 from the gas mixture when it was cultivated in BG11 and BG11-N media, respectively After upgrading process, the residual microalgal cells exhibited 0.21mg/mL of biomass yield,high content of chlorophyll-a (4.8 µg/mL) and carotenoid (11.1 µg/mL). In addition to Oscillatroia sp residual biomass showed a lipid yield (7.5-8.7%) on the tested media.

CONCLUSION

Bacillus coagulans AH1 is a promising tool for biohydrogen production avoiding the drawbacks of biomass pretreatment. Oscillatroia sp is encouraged as a potent tool for upgrading and purification of biohydrogen. These findings led to the development of a multiproduct biorefinery with zero waste that is more economically sustainable.

Simultaneous CAS9 editing of cpSRP43, LHCA6, and LHCA7 in Picochlorum celeri lowers chlorophyll levels and improves biomass productivity

High cellular pigment levels in dense microalgal cultures contribute to excess light absorption. To improve photosynthetic yields in the marine microalga Picochlorum celeri, CAS9 gene editing was used to target the molecular chaperone cpSRP43. Depigmented strains (>50% lower chlorophyll) were generated, with proteomics showing attenuated levels of most light harvesting complex (LHC) proteins. Gene editing generated two types of cpSRP43 transformants with distinct lower pigment phenotypes: (i) a transformant (Δsrp43) with both cpSRP43 diploid alleles modified to encode non-functional polypeptides and (ii) a transformant (STR30309) with a 3 nt in-frame insertion in one allele at the CAS9 cut site (non-functional second allele), leading to expression of a modified cpSRP43. STR30309 has more chlorophyll than Δsrp43 but substantially less than wild type. To further decrease light absorption by photosystem I in STR30309, CAS9 editing was used to stack in disruptions of both LHCA6 and LHCA7 to generate STR30843, which has higher (5-24%) productivities relative to wild type in solar-simulating bioreactors. Maximal productivities required frequent partial harvests throughout the day. For STR30843, exemplary diel bioreactor yields of ~50 g m-2 day-1 were attained. Our results demonstrate diel productivity gains in P. celeri by lowering pigment levels.

A Short Review on Current Status and Obstacles in the Sustainable Production of Biohydrogen from Microalgal Species

Biohydrogen is an economical fuel which has enormous promise as an alternative energy source. The synthesis of biohydrogen can be done more affordably and sustainably using microalgae. For the generation of biohydrogen and the treatment of wastewater, microalgae derived from effluent have been showing very impressive outcomes. In comparison to traditional fuel sources, microalgae have benefits. Microalgae are capable of fixing ambient Carbon dioxide and converting it to carbohydrates, which are subsequently processed biochemically to provide fuel. When compared to terrestrial crops, they require less water and minerals for production. But besides these benefits, there are certain technological restrictions on the scale-up implementations of microalgae bioenergy. In this work, we explored the production of biohydrogen from several types of microalgae. The process of producing biohydrogen is affected by a number of variables, including pH, substrate concentration, the kinds of microalgal species, and others. The most recent studies and difficulties related to each stage of the biohydrogen manufacturing process are outlined. The synthesis of microalgal biohydrogen is improved using promising approaches that are discussed. Also, the specific future direction are covered. The possibility for microalgae-based production of biohydrogen to serve as an environmentally friendly and carbon-free biofuel solution that might handle the impending fuel scarcity was demonstrated. However, additional study is required on both the upstream and downstream processes of the synthesis of biohydrogen.

Deciphering Microalgal Diversity of Peculiar Lentic Ecosystem in Chennai, South India: A Way Towards Sustainability

Microalgae are quickly gaining attention among the researchers in various aspects such as biofuel applications, biogas, biomass production, waste water treatment, carbon fixation, animal feed ingredients, pigment production, and pharmaceutical products. One of the approaches to choose microalgae for biotechnological applications is to investigate their diversity and abundance in all possible wet environments. Samples were collected from three sampling sites for the period of 1 year (October 2021-September 2022) in Vadapalani temple tank at Chennai. Physicochemical parameters in current investigation were estimated according to APHA, 2017. Qualitative and quantitative analyses of phytoplankton were done throughout the study period. One-way ANOVA (Analyses of Variance) and Karl Pearson's correlation coefficient were estimated using SPSS (V.26.0). A total of 11 diversity indices were estimated using PAST (V 4.0). A total of 52 algal species were identified, prevailed over by Chlorophyceae (15 species), followed by Zygnematophyceae, Bacillariophyceae, Cyanophyceae, and Trebouxiophyceae. Chlorophyceae quantitatively structured the major category. The maximum and minimum values of density were observed during the season of summer (287 Cells/L) and monsoon (80 Cells/L), respectively. Chlorophyceae showed dominance with a density of 168 cells/L. The maximum and minimum densities of Chlorophyceae were recorded in the summer season (55 cells/L) and monsoon season (24 cells/L), respectively. Shannon's index (H') attained its zenith in February and April month of 2022 (3.60). This study further ignites the researchers to phycoprospect various temple water to address the nature of microalgae occurrence and for biotechnological purposes.

Integrating microalgae production into mine closure plans

Examples of successful mine closure and acceptable regional transitioning of mining areas are scarce. The recent changes to the environmental, social and governance (ESG) obligations of mining companies should help to ensure that water and land resources as well as post-mining employment opportunities are considered as a part of mine closure. Integrating microalgae production into mine closure plans is a potential opportunity for mining companies to improve many ESG outcomes. Mine sites with sufficient suitable land and water resources in high solar radiation geographies may be able to economically grow microalgae to capture atmospheric CO₂, re-purpose saline mine waters, treat acidic and near-neutral pH metalliferous waters as well as produce soil ameliorants (biofertiliser, biostimulants and/or biochar) to improve mine rehabilitation outcomes. Microalgae production facilities may also provide an alternative industry and employment opportunities to help transition regional mining towns that have become reliant on mining activities. The potential economic, environmental and social benefits of using mine-influenced water for microalgae production may offer an opportunity to successfully close and transition some mining landscapes.

Effect of co-culturing bacteria and microalgae and influence of inoculum ratio during the biological treatment of tannery wastewater

This present investigation is carried out to study the effect of algal and bacterial inoculum concentrations on the removal of organic pollutants and nutrients from the tannery effluent by the combined symbiotic treatment process. The bacterial and microalgal consortia was developed in laboratory setup and mixed together to perform this study. The Influence of algae and bacteria inoculum concentrations on the removal of pollutants such as Chemical Oxygen Demand (COD) and Total Kjeldahl Nitrogen (TKN) were studied using statistical optimization through Response surface methodology. For the design of experimental set up and optimization, full factorial Central composite design was used. The profiles of pH, Dissolved Oxygen (DO) and nitrate were also monitored and studied. The inoculum concentrations of microalgae and bacteria showed significant effect on Co-culturing on COD, TKN and nitrate removals as major response. The linear effect of bacterial inoculum has positive dominant influence on COD and TKN removal efficiencies. Nitrate utilization by microalgae increases with the increase in microalgal inoculum concentration. The maximum removal efficiencies of COD and TKN with 89.9% and 80.9% were obtained at optimum bacterial and algal inoculum concentrations of 6.7 g/L and 8.0 g/L respectively. These outcomes of this study are immensely favorable for maximizing the COD and nitrogen (nutrients) removal capabilities of microalgae-bacterial consortia in tannery effluent.

CO2 sequestration and biodiesel production from Volvox aureus a newly isolated green microalgal species from industrial wastewater

Recently, large-scale biofuel production is mainly dependent on third-generation feedstock, especially microalgae. Since most microalgae can sequester carbon dioxide and utilize it for the enhancement of their growth parameter. In the present study, CO₂ sequestration and Biodiesel production from Volvox aureus a newly isolated green microalgal species from industrial wastewater. Volvox aureus was isolated from the wastewater sample collected from the sewage treatment plant. The isolated V.aureus was grown in the BBM culture containing excess nutrients along with Artificial CO₂ supply to the bioreactor. The addition of an external carbon dioxide source enhanced the total lipid content by up to 27.95%. Further, the lipid was extracted using soxhlet extraction from the isolated microalgal biomass. The extracted lipid was converted into biodiesel using a base catalyst potassium hydroxide. The produced biodiesel was analyzed to test their fuel properties and compared with the diesel standard. This study approach investigated the potential of a future possible environmental pollution reduction and significant potential for a viable biofuel production from microalgae.

Graphene-based catalysts for biodiesel production: Characteristics and performance

Biodiesel is a promising alternative to reduce the dependency on fossil fuels. However, biodiesel's cost is still higher than its petroleum counterpart, hence its production process must be modified to make it economically viable. Microalgae are an alternative feedstock to replace agricultural crops for biodiesel production, and offer several advantages such as fast growth, use of non-arable land, growth in saline and wastewater, and high lipid yield. Unfortunately, biodiesel production from microalgae is very energy-intensive and costly, mainly due to the high energy consumption required for dewatering and drying. Therefore, utilizing wet microalgal biomass instead of dry biomass can be a promising solution to reduce the biodiesel production cost Furthermore, the use of heterogeneous catalysts offers high efficiency, recoverability, and reusability, and is therefore very promising from the economic and environmental perspectives. The unique characteristics of graphene-based nano-catalysts, such as their high surface area, two-dimensional structure, and functional groups, make them suitable candidates for biodiesel production. In this review, the use of graphene-based catalysts for biodiesel production is analyzed in depth, and their efficiency compared to other heterogeneous catalysts is scrutinized. Moreover, their recoverability, reusability, and economic feasibility are critically discussed, and their potential to produce biodiesel from wet microalgae is explored as a sustainable and cost-effective approach.

Integration of third generation biofuels with bio-electrochemical systems: Current status and future perspective

Biofuels hold particular promise as these can replace fossil fuels. Algae, in particular, are envisioned as a sustainable source of third-generation biofuels. Algae also produce several low volume high-value products, which enhance their prospects of use in a biorefinery. Bio-electrochemical systems such as microbial fuel cell (MFC) can be used for algae cultivation and bioelectricity production. MFCs find applications in wastewater treatment, CO₂ sequestration, heavy metal removal and bio-remediation. Oxidation of electron donor by microbial catalysts in the anodic chamber gives electrons (reducing the anode), CO_2, and electrical energy. The electron acceptor at the cathode can be oxygen/NO₃ ^-/NO₂ ^-/metal ions. However, the need for a continuous supply of terminal electron acceptor in the cathode can be eliminated by growing algae in the cathodic chamber, as they produce enough oxygen through photosynthesis. On the other hand, conventional algae cultivation systems require periodic oxygen quenching, which involves further energy consumption and adds cost to the process. Therefore, the integration of algae cultivation and MFC technology can eliminate the need of oxygen quenching and external aeration in the MFC system and thus make the overall process sustainable and a net energy producer. In addition to this, the CO₂ gas produced in the anodic chamber can promote the algal growth in the cathodic chamber. Hence, the energy and cost invested for CO₂ transportation in an open pond system can be saved. In this context, the present review outlines the bottlenecks of first- and second-generation biofuels along with the conventional algae cultivation systems such as open ponds and photobioreactors. Furthermore, it discusses about the process sustainability and efficiency of integrating algae cultivation with MFC technology in detail.

Chemical composition and species identification of microalgal biomass grown at pilot-scale with municipal wastewater and CO2 from flue gases

The production potential of a locally isolated Chlorella vulgaris strain and a local green-algae consortium, used in municipal wastewater treatment combined with CO₂ sequestration from flue gases, was evaluated for the first time by comparing the elemental and biochemical composition and heating value of the biomass produced. The microalgae were grown in outdoor pilot-scale ponds under subarctic summer conditions. The impact of cultivation in a greenhouse climate was also tested for the green-algae consortium; additionally, the variation in species composition over time in the three ponds was investigated. Our results showed that the biomass produced in the consortium/outdoor pond had the greatest potential for bioenergy production because both its carbohydrates and lipids contents were significantly higher than the biomasses from the consortium/greenhouse and C. vulgaris/outdoor ponds. Although greenhouse conditions significantly increased the consortium biomass's monounsaturated fatty acid content, which is ideal for biodiesel production, an undesirable increase in ash and chemical elements, as well as a reduction in heating value, were also observed. Thus, the placement of the pond inside a greenhouse did not improve the production potential of the green-algae consortium biomass in the current study infrastructure and climate conditions.

Review on rewiring of microalgal strategies for the heavy metal remediation - A metal specific logistics and tactics

Phycoremediation of heavy metals are gaining much attention and becoming an emerging practice for the metal removal in diverse environmental matrices. Still, the physicochemical state of metal polluted sites is often found to be complex and haphazard in nature due to the irregular discharge of wastes, that leads to the lack of conjecture on the application of microalgae for the metal bioremediation. Besides, the foresaid issues might be eventually ended up with futile effect to the polluted site. Therefore, this review is mainly focusing on interpretative assessment on pre-existing microalgal strategies and their merits and demerits for selected metal removal by microalgae through various process such as natural attenuation, nutritional amendment, chemical pretreatment, metal specific modification, immobilization and amalgamation, customization of genetic elements and integrative remediation approaches. Thus, this review provides the ideal knowledge for choosing an efficient metal remediation tactics based on the state of polluted environment. Also, this in-depth description would provide the speculative knowledge of counteractive action required for pass-over the barriers and obstacles during implementation. In addition, the most common metal removal mechanism of microalgae by adsorption was comparatively investigated with different metals through the principal component analysis by grouping various factor such as pH, temperature, initial metal concentration, adsorption capacity, removal efficiency, contact time in different microalgae. Conclusively, the suitable strategies for different heavy metals removal and addressing the complications along with their solution is comprehensively deliberated for metal removal mechanism in microalgae.

Promoting cell growth and characterizing partial symbiotic relationships in the co-cultivation of green alga Chlamydomonas reinhardtii and Escherichia coli

BACKGROUND

By co-culturing selected microalgae and heterotrophic microorganisms, the growth rate of microalgae can be improved even under atmospheric conditions with a low CO₂ concentration. However, the detailed mechanism of improvement of proliferative capacity by co-culture has not been elucidated. In this study, we investigated changes in the proliferative capacity of the green alga Chlamydomonas reinhardtii by co-culturing with Escherichia coli.

MAIN METHODS AND MAJOR RESULTS

In the co-culture, the number of C. reinhardtii cells reached 2.22 × 10¹⁰  cell/L on day 14 of culture. This was about 1.9 times the number of cells (1.16 × 10¹⁰  cell/L) on day 14 compared to C. reinhardtii cells in monoculture. The starch content per cell in the co-culture of C. reinhardtii and E. coli on the 14th day (2.09 × 10^-11  g/cell) was 1.3 times higher than that in the C. reinhardtii monoculture (1.59 × 10^-11  g/cell), and the starch content per culture medium improved 2.5 times with co-cultivation. By analyzing the gene transcription profiles and key media components, we clarified that E. coli produced CO₂ from the organic carbon in the medium and the organic carbon produced by photosynthesis of C. reinhardtii, and this CO₂ likely enhanced the growth of C. reinhardtii.

CONCLUSIONS

Consequently, E. coli plays a key role in promoting the growth of C. reinhardtii as well as the accumulation of starch which is a valuable intermediate for the production of a range of useful chemicals from CO₂ .

Structured population balances to support microalgae-based processes: Review of the state-of-art and perspectives analysis

Design and optimization of microalgae processes have traditionally relied on the application of unsegregated mathematical models, thus neglecting the impact of cell-to-cell heterogeneity. However, there is experimental evidence that the latter one, including but not limited to variation in mass/size, internal composition and cell cycle phase, can play a crucial role in both cultivation and downstream processes. Population balance equations (PBEs) represent a powerful approach to develop mathematical models describing the effect of cell-to-cell heterogeneity. In this work, the potential of PBEs for the analysis and design of microalgae processes are discussed. A detailed review of PBE applications to microalgae cultivation, harvesting and disruption is reported. The review is largely focused on the application of the univariate size/mass structured PBE, where the size/mass is the only internal variable used to identify the cell state. Nonetheless, the need, addressed by few studies, for additional or alternative internal variables to identify the cell cycle phase and/or provide information about the internal composition is discussed. Through the review, the limitations of previous studies are described, and areas are identified where the development of more reliable PBE models, driven by the increasing availability of single-cell experimental data, could support the understanding and purposeful exploitation of the mechanisms determining cell-to-cell heterogeneity.

Microalgae as Raw Materials for Aquafeeds: Growth Kinetics and Improvement Strategies of Polyunsaturated Fatty Acids Production

Studies have shown that ancient cultures used microalgae as food for centuries. Currently, scientific reports highlight the value of nutritional composition of microalgae and their ability to accumulate polyunsaturated fatty acids at certain operational conditions. These characteristics are gaining increasing interest for the aquaculture industry which is searching for cost-effective replacements for fish meal and oil because these commodities are one of the most significant operational expenses and their dependency has become a bottleneck for their sustainable development of the aquaculture industry. This review is aimed at highlighting the use of microalgae as polyunsaturated fatty acid source in aquaculture feed formulations, despite their scarce production at industrial scale. Moreover, this document includes several approaches to improve microalgae production and to increase the content of polyunsaturated fatty acids with emphasis in the accumulation of DHA, EPA, and ARA. Furthermore, the document compiles several studies which prove microalgae-based aquafeeds for marine and freshwater species. Finally, the study explores the aspects that intervene in production kinetics and improvement strategies with possibilities for upscaling and facing main challenges of using microalgae in the commercial production of aquafeeds.

Sustainable production of biofuels and bioderivatives from aquaculture and marine waste

The annual global fish production reached a record 178 million tonnes in 2020, which continues to increase. Today, 49% of the total fish is harvested from aquaculture, which is forecasted to reach 60% of the total fish produced by 2030. Considering that the wastes of fishing industries represent up to 75% of the whole organisms, the fish industry is generating a large amount of waste which is being neglected in most parts of the world. This negligence can be traced to the ridicule of the value of this resource as well as the many difficulties related to its valorisation. In addition, the massive expansion of the aquaculture industry is generating significant environmental consequences, including chemical and biological pollution, disease outbreaks that increase the fish mortality rate, unsustainable feeds, competition for coastal space, and an increase in the macroalgal blooms due to anthropogenic stressors, leading to a negative socio-economic and environmental impact. The establishment of integrated multi-trophic aquaculture (IMTA) has received increasing attention due to the environmental benefits of using waste products and transforming them into valuable products. There is a need to integrate and implement new technologies able to valorise the waste generated from the fish and aquaculture industry making the aquaculture sector and the fish industry more sustainable through the development of a circular economy scheme. This review wants to provide an overview of several approaches to valorise marine waste (e.g., dead fish, algae waste from marine and aquaculture, fish waste), by their transformation into biofuels (biomethane, biohydrogen, biodiesel, green diesel, bioethanol, or biomethanol) and recovering biomolecules such as proteins (collagen, fish hydrolysate protein), polysaccharides (chitosan, chitin, carrageenan, ulvan, alginate, fucoidan, and laminarin) and biosurfactants.

Sustainable Production of Pigments from Cyanobacteria

Pigments are intensely coloured compounds used in many industries to colour other materials. The demand for naturally synthesised pigments is increasing and their production can be incorporated into circular bioeconomy approaches. Natural pigments are produced by bacteria, cyanobacteria, microalgae, macroalgae, plants and animals. There is a huge unexplored biodiversity of prokaryotic cyanobacteria which are microscopic phototrophic microorganisms that have the ability to capture solar energy and CO2 and use it to synthesise a diverse range of sugars, lipids, amino acids and biochemicals including pigments. This makes them attractive for the sustainable production of a wide range of high-value products including industrial chemicals, pharmaceuticals, nutraceuticals and animal-feed supplements. The advantages of cyanobacteria production platforms include comparatively high growth rates, their ability to use freshwater, seawater or brackish water and the ability to cultivate them on non-arable land. The pigments derived from cyanobacteria and microalgae include chlorophylls, carotenoids and phycobiliproteins that have useful properties for advanced technical and commercial products. Development and optimisation of strain-specific pigment-based cultivation strategies support the development of economically feasible pigment biorefinery scenarios with enhanced pigment yields, quality and price. Thus, this chapter discusses the origin, properties, strain selection, production techniques and market opportunities of cyanobacterial pigments.

Research status, challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve carbon peaking and carbon neutrality. Among them, the catalytic conversion of carbon dioxide to generate renewable fuels has received great attention. As one of these methods, photocatalysis has its unique properties and mechanism, which can only rely on sunlight without inputting other energy. It is an emerging discipline with great development prospects. The core of photocatalysis lies in the development of photocatalysts with high activity, high selectivity, low cost, and high durability. This review first introduces the background and mechanism of photocatalysis, then introduces various types of photocatalysts based on different substrates, and analyzes the methods and mechanisms to improve the activity and selectivity of photocatalysts. Finally, combining the plasmon effect with photocatalysis, the review analyzes the promoting effect of the plasmon effect on the photocatalytic carbon dioxide synthesis of renewable fuels, which provides a new idea for it.

Simultaneous photoautotrophic production of DHA and EPA by Tisochrysis lutea and Microchloropsis salina in co-culture

Marine microalgae have received much attention as a sustainable source of the two health beneficial omega-3-fatty acids docosahexaenoic acid (DHA, C22:6) and eicosapentaenoic acid (EPA, C20:5). However, photoautotrophic monocultures of microalgae can only produce either DHA or EPA enriched biomass. An alternative may be the photoautotrophic co-cultivation of Tisochrysis lutea as DHA-producer with Microchloropsis salina for simultaneous EPA production to obtain EPA- and DHA-rich microalgae biomass in a nutritionally balanced ratio. Photoautotrophic co-cultivation processes of T. lutea and M. salina were studied, applying scalable and fully controlled lab-scale gas-lift flat-plate photobioreactors with LED illumination for dynamic climate simulation of a repeated sunny summer day in Australia [day-night cycles of incident light (PAR) and temperature]. Monocultures of both marine microalgae were used as reference batch processes. Differences in the autofluorescence of both microalgae enabled the individual measurement, of cell distributions in co-culture, by flow cytometry. The co-cultivation of T. lutea and M. salina in artificial sea water with an inoculation ratio of 1:3 resulted in a balanced biomass production of both microalgae simultaneously with a DHA:EPA ratio of almost 1:1 (26 mgDHA gCDW-1, and 23 mgEPA gCDW-1, respectively) at harvest after depletion of the initially added fertilizer. Surprisingly, more microalgae biomass was produced within 8 days in co-cultivation with an increase in the cell dry weight (CDW) concentration by 31%, compared to the monocultures with the same amount of light and fertilizer. What is more, DHA-content of the microalgae biomass was enhanced by 33% in the co-culture, whereas EPA-content remained unchanged compared to the monocultures.

Thermal-tolerant potential of ordinary Chlorella pyrenoidosa and the promotion of cell harvesting by heterotrophic cultivation at high temperature

During the heterotrophic cultivation of microalgae, a cooled process against temperature rise caused by the metabolism of exogenous organic carbon sources greatly increases cultivation cost. Furthermore, microalgae harvesting is also a cost-consuming process. Cell harvesting efficiency is closely related to the characteristics of the algal cells. It may be possible to change cell characteristics through controlling culture conditions to make harvesting easier. In this study, the mesophilic Chlorella pyrenoidosa was found to be a thermal-tolerant species in the heterotrophic mode. The cells could maintain their maximal specific growth rate at 40°C and reached 1.45 day−1, which is equivalent to that of cultures at 35°C but significantly higher than those cultured at lower temperatures. Interestingly, the cells cultured at 40°C were much easier to be harvested than those at lower temperatures. The harvesting efficiency of the cells cultured at 40°C reached 96.83% after sedimentation for 240 min, while the cells cultured at lower temperatures were reluctant to settle. Likely, the same circumstance occurred when cells were harvested by centrifugation or flocculation. The promotion of cell harvesting for cells cultured at high temperatures was mainly attributed to increased cell size and decreased cell surface charge. To the best of our knowledge, this is the first report that cells cultured at high temperatures can promote microalgae harvesting. This study explores a new approach to simplify the cultivation and harvesting of microalgae, which effectively reduces the microalgae production cost.

Life and death of Pseudokirchneriella subcapitata: physiological changes during chronological aging

The green alga Pseudokirchneriella subcapitata is widely used in ecotoxicity assays and has great biotechnological potential as feedstock. This work aims to characterize the physiology of this alga associated with the aging resulting from the incubation of cells for 21 days, in the OECD medium, with continuous agitation and light exposure, in a batch mode. After inoculation, cells grow exponentially during 3 days, and the culture presents a typical green color. In this phase, "young" algal cells present, predominantly, a lunate morphology with the chloroplast occupying a large part of the cell, maximum photosynthetic activity and pigments concentration, and produce starch as a reserve material. Between the 5^th and the 12^th days of incubation, cells are in the stationary phase. The culture becomes less green, and the cells stop dividing (≥ 99% have one nucleus) and start to age. "Old" algal cells present chloroplast shrinkage, an abrupt decline of chlorophylls content, and photosynthetic capacity (Fv/Fm and ɸ_PSII), accompanied by a degradation of starch and an increase of neutral lipids content. The onset of the death phase occurs after the 12^th day and is characterized by the loss of cell membrane integrity of some algae (cell death). The culture stays, progressively, yellow, and the majority of the population (~93%) is composed of live cells, chronologically "old," with a significant drop in photosynthetic activity (decay > 75% of Fv/Fm and ɸ_PSII) and starch content. The information here achieved can be helpful when exploring the potential of this alga in toxicity studies or in biotechnological applications. KEY POINTS: • Physiological changes of P. subcapitata with chronological aging are shown • "Young" algae exhibit a semilunar shape, high photosynthetic activity, and accumulated starch • "Old"-live algae show reduced photosynthetic capacity and accumulated lipids.

Algal biorefinery towards decarbonization: Economic and environmental consideration

Algae biomass contains various biological elements, including lipids, proteins, and carbohydrates, making it a viable feedstock for manufacturing biofuels. However, the biggest obstacle to commercializing algal biofuels is their high production costs, primarily related to an algae culture. The extraction of additional high value added bioproducts from algal biomass is thus required to increase the economic viability of producing algae biofuel. This study aims to discuss the economic benefits of a zero-carbon economy and an environmentally sustainable algae resource in decarbonizing the environment through the manufacture of algal-based biofuels from algae biomass for a range of potential uses. In addition, research on the algae biorefineries, with an emphasis on case studies for various cultivation methods, as well as the commercialization of biofuel and bioenergy. Overall, the algal biorefinery offers fresh potential for synthesizing various products.

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

Bioengineering to Accelerate Biodiesel Production for a Sustainable Biorefinery

Biodiesel is an alternative, carbon-neutral fuel compared to fossil-based diesel, which can reduce greenhouse gas (GHGs) emissions. Biodiesel is a product of microorganisms, crop plants, and animal-based oil and has the potential to prosper as a sustainable and renewable energy source and tackle growing energy problems. Biodiesel has a similar composition and combustion properties to fossil diesel and thus can be directly used in internal combustion engines as an energy source at the commercial level. Since biodiesel produced using edible/non-edible crops raises concerns about food vs. fuel, high production cost, monocropping crisis, and unintended environmental effects, such as land utilization patterns, it is essential to explore new approaches, feedstock and technologies to advance the production of biodiesel and maintain its sustainability. Adopting bioengineering methods to produce biodiesel from various sources such as crop plants, yeast, algae, and plant-based waste is one of the recent technologies, which could act as a promising alternative for creating genuinely sustainable, technically feasible, and cost-competitive biodiesel. Advancements in genetic engineering have enhanced lipid production in cellulosic crops and it can be used for biodiesel generation. Bioengineering intervention to produce lipids/fat/oil (TGA) and further their chemical or enzymatic transesterification to accelerate biodiesel production has a great future. Additionally, the valorization of waste and adoption of the biorefinery concept for biodiesel production would make it eco-friendly, cost-effective, energy positive, sustainable and fit for commercialization. A life cycle assessment will not only provide a better understanding of the various approaches for biodiesel production and waste valorization in the biorefinery model to identify the best technique for the production of sustainable biodiesel, but also show a path to draw a new policy for the adoption and commercialization of biodiesel.

Current Progress, Challenges and Perspectives in the Microalgal-Bacterial Aerobic Granular Sludge Process: A Review

Traditional wastewater treatment technologies have become increasingly inefficient to meet the needs of low-consumption and sustainable wastewater treatment. Researchers are committed to seeking new wastewater treatment technologies, to reduce the pressure on the environment caused by resource shortages. Recently, a microalgal-bacterial granular sludge (MBGS) technology has attracted widespread attention due to its high efficiency wastewater treatment capacity, low energy consumption, low CO₂ emissions, potentially high added values, and resource recovery capabilities. This review focused primarily on the following aspects of microalgal-bacterial granular sludge technology: (1) MBGS culture and maintenance operating parameters, (2) MBGS application in different wastewaters, (3) MBGS additional products: biofuels and bioproducts, (4) MBGS energy saving and consumption reduction: greenhouse gas emission reduction, and (5) challenges and prospects. The information in this review will help us better understand the current progress and future direction of the MBGS technology development. It is expected that this review will provide a sound theoretical basis for the practical applications of a MBGS technology in environmentally sustainable wastewater treatment, resource recovery, and system optimization.

Development of Operating Process for Continuous Production of Biomass by Tetradesmus obliquus (MT188616.1) in a Hollow Fiber Membrane Photobioreactor

An effective prototype of photobioreactor namely hollow fiber membrane bioreactor is employed to produce algal biomass for biofuel production. The effect of two-stage cultivation system on the biomass productivity and lipid production is studied using freshwater green microalga Tetradesmus obliquus MT188616.1. The hybrid system combines exponential biomass production in hollow fiber membrane photobioreactor (HFMPBr) and a coordinated high-lipid stimulation phase in nitrogen-deprived medium by the shake flask method. This work is proposed to examine the usefulness of HFMPBr module to enhance the microalgal growth rate through the effective mass transfer by standardizing the culture medium re-circulation flow rates (5 - 45mL/min) through the hollow fiber membranes. Cultivation is carried out at continuous mode in HFMPBr containing polysulfone fabricated membranes at fixed light intensity of 50 µmol m^-2 s^-1 and temperature at 28°C. Biomass productivity and specific growth rate obtained are 0.44gL^-1d^-1 and 1.61µ d^-1 with a lipid yield of 0.1g/L. The key operating parameter i.e., liquid flow rate is optimized based on biomass production. The highest biomass concentration is produced at the flow rate of 45mLmin^-1. The results showed that HFMPBr module is a better choice for the algal-cultivation to obtain higher biomass yield.

Associated bacterial microbiome responds opportunistic once algal host Scenedesmus vacuolatus is attacked by endoparasite Amoeboaphelidium protococcarum

The interactions of microalgae and their associated microbiomes have come to the fore of applied phycological research in recent years. However, the functional mechanisms of microalgal interactions remain largely unknown. Here, we examine functional protein patterns of the microalgae Scenedesmus vacuolatus and its associated bacterial community during algal infection by the endoparasite Amoeboaphelidium protococcarum. We performed metaproteomics analyses of non-infected (NI) and aphelid-infected (AI) S.vacuolatus cultures to investigate underlying functional and physiological changes under infectious conditions. We observed an increase in bacterial protein abundance as well as a severe shift of bacterial functional patterns throughout aphelid-infection in comparison to NI treatment. Most of the bacterial proteins (about 55%) upregulated in AI were linked to metabolism and transport of amino acids, lipids, coenzymes, nucleotides and carbohydrates and to energy production. Several proteins associated with pathogenic bacterial-plant interactions showed higher protein abundance levels in AI treatment. These functional shifts indicate that associated bacteria involved in commensalistic or mutualistic interactions in NI switch to opportunistic lifestyles and facilitate pathogenic or saprotrophic traits in AI treatment. In summary, the native bacterial microbiome adapted its metabolism to algal host die off and is able to metabolize nutrients from injured cells or decompose dead cellular material.

Cyanobacteria as a Promising Alternative for Sustainable Environment: Synthesis of Biofuel and Biodegradable Plastics

With the aim to alleviate the increasing plastic burden and carbon footprint on Earth, the role of certain microbes that are capable of capturing and sequestering excess carbon dioxide (CO2) generated by various anthropogenic means was studied. Cyanobacteria, which are photosynthetic prokaryotes, are promising alternative for carbon sequestration as well as biofuel and bioplastic production because of their minimal growth requirements, higher efficiency of photosynthesis and growth rates, presence of considerable amounts of lipids in thylakoid membranes, and cosmopolitan nature. These microbes could prove beneficial to future generations in achieving sustainable environmental goals. Their role in the production of polyhydroxyalkanoates (PHAs) as a source of intracellular energy and carbon sink is being utilized for bioplastic production. PHAs have emerged as well-suited alternatives for conventional plastics and are a parallel competitor to petrochemical-based plastics. Although a lot of studies have been conducted where plants and crops are used as sources of energy and bioplastics, cyanobacteria have been reported to have a more efficient photosynthetic process strongly responsible for increased production with limited land input along with an acceptable cost. The biodiesel production from cyanobacteria is an unconventional choice for a sustainable future as it curtails toxic sulfur release and checks the addition of aromatic hydrocarbons having efficient oxygen content, with promising combustion potential, thus making them a better choice. Here, we aim at reporting the application of cyanobacteria for biofuel production and their competent biotechnological potential, along with achievements and constraints in its pathway toward commercial benefits. This review article also highlights the role of various cyanobacterial species that are a source of green and clean energy along with their high potential in the production of biodegradable plastics.

Biogranulation process facilitates cost-efficient resources recovery from microalgae-based wastewater treatment systems and the creation of a circular bioeconomy

Energy self-sufficient wastewater treatment designs can reduce net energy consumption and achieve resources recovery. Microalgae are regarded as a promising candidate for developing a circular bioeconomy in wastewater treatment plants (WWTPs) due to its potential for simultaneous wastewater remediation and high value-added materials production. Much effort has been made to overcome the high production costs for microalgae; however, biomass harvesting still remains as the bottleneck for its large-scale application. In this study, the novel biogranulation system facilitating easier and faster microalgae harvesting was firstly compared with the conventional suspended culture for energy-efficiency and sustainability assessment on microalgae (Ankistrodesmus falcatus var. acicularis) cultivation using the synthetic anaerobic digestion liquor. Results demonstrated that the biogranulation system enhanced volumetric biomass productivity (223.17 ± 11.82 g/m³/day) by about 4.4 times compared to that from the suspended system (41.57 ± 2.08 g/m³/day) under the same environmental conditions. It was noticed that lipids, carbohydrates and proteins were accumulated in microalgae cells along with nutrients remediation, and the microalgae granules with much higher proteins content (313.28 ± 26.67 mg/g-VSS) could be easily harvested through 2 min gravity sedimentation with little impact on the contents of carbohydrates and lipids. In the whole cultivation and harvesting process, the biomass mass-based electricity consumption and footprint demand by the biogranulation system were reduced by 58% and 76%, respectively. Results from this study provide a cost-effective and sustainable approach for microalgae in the treatment of nutrients rich digestion liquor with simultaneous production of valuable biomaterials.

Health Benefits, Food Applications, and Sustainability of Microalgae-Derived N-3 PUFA

Today's consumers are increasingly aware of the beneficial effects of n-3 PUFA in preventing, delaying, and intervening various diseases, such as coronary artery disease, hypertension, diabetes, inflammatory and autoimmune disorders, neurodegenerative diseases, depression, and many other ailments. The role of n-3 PUFA on aging and cognitive function is also one of the hot topics in basic research, product development, and clinical applications. For decades, n-3 PUFA, especially EPA and DHA, have been supplied by fish oil and seafood. With the continuous increase of global population, awareness about the health benefits of n-3 PUFA, and socioeconomic improvement worldwide, the supply chain is facing increasing challenges of insufficient production. In this regard, microalgae have been well considered as promising sources of n-3 PUFA oil to mitigate the supply shortages. The use of microalgae to produce n-3 PUFA-rich oils has been explored for over two decades and some species have already been used commercially to produce n-3 PUFA, in particular EPA- and/or DHA-rich oils. In addition to n-3 PUFA, microalgae biomass contains many other high value biomolecules, which can be used in food, dietary supplement, pharmaceutical ingredient, and feedstock. The present review covers the health benefits of n-3 PUFA, EPA, and DHA, with particular attention given to the various approaches attempted in the nutritional interventions using EPA and DHA alone or combined with other nutrients and bioactive compounds towards improved health conditions in people with mild cognitive impairment and Alzheimer's disease. It also covers the applications of microalgae n-3 PUFA in food and dietary supplement sectors and the economic and environmental sustainability of using microalgae as a platform for n-3 PUFA-rich oil production.

Pharmaceuticals in the Aquatic Environment: A Review on Eco-Toxicology and the Remediation Potential of Algae

The pollution of the aquatic environment has become a worldwide problem. The widespread use of pesticides, heavy metals and pharmaceuticals through anthropogenic activities has increased the emission of such contaminants into wastewater. Pharmaceuticals constitute a significant class of aquatic contaminants and can seriously threaten the health of non-target organisms. No strict legal regulations on the consumption and release of pharmaceuticals into water bodies have been implemented on a global scale. Different conventional wastewater treatments are not well-designed to remove emerging contaminants from wastewater with high efficiency. Therefore, particular attention has been paid to the phycoremediation technique, which seems to be a promising choice as a low-cost and environment-friendly wastewater treatment. This technique uses macro- or micro-algae for the removal or biotransformation of pollutants and is constantly being developed to cope with the issue of wastewater contamination. The aims of this review are: (i) to examine the occurrence of pharmaceuticals in water, and their toxicity on non-target organisms and to describe the inefficient conventional wastewater treatments; (ii) present cost-efficient algal-based techniques of contamination removal; (iii) to characterize types of algae cultivation systems; and (iv) to describe the challenges and advantages of phycoremediation.