High- and Low-Energy Emulsifications for Food Applications: A Focus on Process Parameters

Recent advances in the development and application of curcumin-loaded micro/nanocarriers in food research

The application of curcumin in food science is challenged by its poor water solubility, easy degradation under processing and within the gastrointestinal tract, and poor bioavailability. Micro/nanocarrier is an emerging and efficient platform to overcome these drawbacks. This review focuses on the recent advances in the development and application of curcumin-loaded micro/nanocarriers in food research. The recent development advances of curcumin-loaded micro/nanocarriers could be classified into ten basic systems: emulsions, micelles, dendrimers, hydrogel polymeric particles, polymer nanofibers, polymer inclusion complexes, liposomes, solid lipid particles, structured lipid carriers, and extracellular vesicles. The application advances of curcumin-loaded micro/nanocarriers for food research could be classified into four types: coloring agents, functional active agents, preservation agents, and quality sensors. This review demonstrated that micro/nanocarriers were excellent carriers for the fat-soluble curcumin and the obtained curcumin-loaded micro/nanocarriers had promising application prospects in the field of food science.

Fabrication and Stability Improvement of Monoglyceride Oleogel/Polyglycerol Polyricinoleate-Stabilized W/O High Internal Phase Pickering Emulsions

To decrease the lipid content in water-in-oil (W/O) emulsions, high internal phase Pickering W/O emulsions (HIPPE) were fabricated using magnetic stirring using a combination of monoglyceride (MAG) oleogel and polyglycerol polyacrylate oleate (PGPR) as stabilizers. Effects of MAGs (glyceryl monostearate-GMS, glycerol monolaurate-GML and glycerol monocaprylate-GMC) and internal phase components on the formation and properties of HIPPEs were investigated. The results showed that milky-white stabilized W/O HIPPE with up to 85 wt% aqueous phase content was successfully prepared, and the droplet interfaces presented a network of MAG crystals, independent of the MAG type. All HIPPEs exhibited great stability under freeze-thaw cycles but were less plastic. Meanwhile, GML-oleogel-based HIPPEs had larger particle size and were less thermal stable than GMS and GMC-based HIPPEs. Compared to guar gum, the internal phase components of sodium chloride and sucrose were more effective in reducing the particle size of HIPPEs, improving their stability and plasticity, and stabilizing them during 100-day storage. HIPPEs presented great spreadability, ductility and plasticity after whipping treatment. This knowledge provides a new perspective on the use of oleogels as co-stabilizers for the formation of W/O HIPPEs, which can be used as a potential substitute for creams.

Strategies to Improve the Transdermal Delivery of Poorly Water-Soluble Non-Steroidal Anti-Inflammatory Drugs

The transdermal delivery of non-steroidal anti-inflammatory drugs (NSAIDs) has the potential to overcome some of the major disadvantages relating to oral NSAID usage, such as gastrointestinal adverse events and compliance. However, the poor solubility of many of the newer NSAIDs creates challenges in incorporating the drugs into formulations suitable for application to skin and may limit transdermal permeation, particularly if the goal is therapeutic systemic drug concentrations. This review is an overview of the various strategies used to increase the solubility of poorly soluble NSAIDs and enhance their permeation through skin, such as the modification of the vehicle, the modification of or bypassing the barrier function of the skin, and using advanced nano-sized formulations. Furthermore, the simple yet highly versatile microemulsion system has been found to be a cost-effective and highly successful technology to deliver poorly water-soluble NSAIDs.

Effect of the Combination of Synthetic Anthelmintics with Carvacryl Acetate in Emulsions with and without a Sodium Alginate Matrix on Haemonchus contortus

The present study aimed to evaluate the effect of nanoemulsions using combined synthetic anthelmintics, thiabendazole (TBZ), levamisole (LEV), and ivermectin (IVM), with carvacryl acetate (CA) against Haemonchus contortus, and also tested the presence and absence of alginate (ALG). The anthelmintic effect of the CA/TBZ nanoemulsion was evaluated in the egg hatch test (EHT). The effects of CA/IVM and CA/LEV nanoemulsions were evaluated in the larval development test (LDT). The emulsions CA/TBZ/ALG and CA/TBZ showed a multimodal profile, with most particles on the nanometric scale. The encapsulation efficiency in CA/TBZ/ALG was 80.25%, and that in CA/LEV/ALG was 89.73%. In the EHT, CA/TBZ and CA/TBZ/ALG showed mean combination indices (CIs) of 0.55 and 0.36, respectively, demonstrating synergism in both. In LDT, CA/IVM had an average CI of 0.75, and CA/LEV and CA/LEV/ALG showed CI values of 0.4 and 0.93, respectively. It was concluded that CA/TBZ showed a synergistic interaction, and CA/TBZ/ALG showed an enhanced effect. In addition, the matrix brought stability to the product, encouraging its improvement to obtain higher efficacy.

Effect of polymer addition on the phase behavior of oil-water-surfactant systems of Winsor III type

Ternary oil-water-surfactant systems can give rise to an O/W microemulsion in equilibrium with excess oil, a W/O microemulsion in equilibrium with excess water, or a bicontinuous microemulsion in equilibrium with excess oil and water. This type of phase behavior has been known for a long time and the three systems are often referred to as Winsor I, Winsor II and Winsor III, respectively after the British scientist P. A. Winsor who pioneered the area. The Winsor systems are technically important and well understood today. It was later found that addition of a polymer to the oil-water-surfactant system can influence the phase behavior considerably. While a hydrophilic polymer will be incorporated in the water phase and a hydrophobic polymer in the oil phase, an amphiphilic polymer with the right hydrophilic-lipophilic balance may expand the middle phase microemulsion in a Winsor III system. Expansion of the middle phase of such a system will lead to a reduction of the oil/microemulsion and the microemulsion/water interfacial tensions. This can be practically important, and the effect is currently of considerable interest for so-called surfactant flooding for enhanced oil recovery (EOR). Boosting the middle phase of the Winsor III system by addition of a polymer to the surfactant system is still not an established procedure and not so well understood from a scientific point of view. In this review we summarize the work done in the field and we demonstrate that the role of the polymer is intimately linked to its interactions with the three other components in the system: the oil, the water, and the surfactant(s).

Caffeine-Containing Emulsion: Influence of the HLB and Mixing Proportions, the Oil's Chemical Composition, and the Existence of Caffeine on Emulsion Properties

This study employs a low-energy emulsification method to prepare caffeine-containing emulsions, denoted as Caf-EM. Three different oils, including coconut, sesame, and grape seed oils, are utilized along with the surfactants Span 80 and Tween 80. We investigate the influence of various factors, including (i) the hydrophilic-lipophilic balance (HLB) and surfactant ratio, (ii) the chemical composition of the oils, and (iii) the presence of caffeine, on the stability and size of emulsions. The results indicate that the HLB value and surfactant ratio are the most crucial factors affecting the emulsions' stability. The most stable Caf-EM formulation is achieved by combining mixed surfactants of Span 80 and Tween 80 with an optimal HLB value of 6.4 at a concentration of 15% (S15 to 6.4) across all oil types. This specific ratio also leads to significantly smaller emulsion droplet sizes than other ratios and is the only ratio that produces stable emulsions even without caffeine (denoted as EM). Notably, formulation S15-6.4 additionally causes a phase inversion from oil-in-water (O/W) to water-in-oil (W/O). Furthermore, the presence of caffeine in the water phase contributes to the formation of smaller and more stable emulsions. The particle size of Caf-EM is approximately 1.5 times smaller than that of EM. Regarding the oil's chemical composition, while there is a discernible trend in emulsion droplet size (coconut oil > grape seed oil > sesame oil), the differences within this sequence are insignificant, suggesting that the oil's chemical composition does not have a pronounced effect.

Peppermint essential oil and its nano-emulsion: Potential against aflatoxigenic fungus Aspergillus flavus in food and feed

A facultative parasite called Aspergillus flavus contaminates several important food crops before and after harvest. In addition, the pathogen that causes aspergillosis infections in humans and animals is opportunistic. Aflatoxin, a secondary metabolite produced by Aspergillus flavus, is also carcinogenic and mutagenic, endangering human and animal health and affecting global food security. Peppermint essential oils and plant-derived natural products have recently shown promise in combating A. flavus infestations and aflatoxin contamination. This review discusses the antifungal and anti-aflatoxigenic properties of peppermint essential oils. It then discusses how peppermint essential oils affect the growth of A. flavus and the biosynthesis of aflatoxins. Several cause physical, chemical, or biochemical changes to the cell wall, cell membrane, mitochondria, and associated metabolic enzymes and genes. Finally, the prospects for using peppermint essential oils and natural plant-derived chemicals to develop novel antifungal agents and protect foods are highlighted. In addition to reducing the risk of aspergillosis infection, this review highlights the significant potential of plant-derived natural products and peppermint essential oils to protect food and feed from aflatoxin contamination and A. flavus infestation.

Droplet-Based Microfluidics as a Platform to Design Food-Grade Delivery Systems Based on the Entrapped Compound Type

Microfluidic technology has emerged as a powerful tool for several applications, including chemistry, physics, biology, and engineering. Due to the laminar regime, droplet-based microfluidics enable the development of diverse delivery systems based on food-grade emulsions, such as multiple emulsions, microgels, microcapsules, solid lipid microparticles, and giant liposomes. Additionally, by precisely manipulating fluids on the low-energy-demand micrometer scale, it becomes possible to control the size, shape, and dispersity of generated droplets, which makes microfluidic emulsification an excellent approach for tailoring delivery system properties based on the nature of the entrapped compounds. Thus, this review points out the most current advances in droplet-based microfluidic processes, which successfully use food-grade emulsions to develop simple and complex delivery systems. In this context, we summarized the principles of droplet-based microfluidics, introducing the most common microdevice geometries, the materials used in the manufacture, and the forces involved in the different droplet-generation processes into the microchannels. Subsequently, the encapsulated compound type, classified as lipophilic or hydrophilic functional compounds, was used as a starting point to present current advances in delivery systems using food-grade emulsions and their assembly using microfluidic technologies. Finally, we discuss the limitations and perspectives of scale-up in droplet-based microfluidic approaches, including the challenges that have limited the transition of microfluidic processes from the lab-scale to the industrial-scale.

Food grade nanoemulsions: promising delivery systems for functional ingredients

Nano-emulsions are receiving great attention in various industries, especially in the food sector. Peculiar properties of nano-sized droplets and high surface area are most suited for the development and delivery of functional ingredients. Nano-emulsions systems are suitable for encapsulation, protection, improving bioavailability, and target release of sensitive functional compounds. Nano-emulsions have promising potential for the delivery of nutraceuticals, probiotics, flavors, and colors. Nano-emulsions with active ingredients (antimicrobials) have a key part in ensuring food safety, nutrition, and quality of food. Nanoemulsions can also be used for biodegradable coating, packaging, antimicrobial coating, and quality and shelf life enhancement of different foods. The current review includes an overview of nanotechnology nano-emulsions, materials, techniques for formulation & production of nano-emulsions for food and nutrition. Furthermore, the analytical approaches used for the characterization of nano-emulsions and finally, the applications and limitations of nano-emulsions in the food industry are discussed in detail.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05387-3.

Emulsion-Based Coatings for Preservation of Meat and Related Products

One of the biggest challenges faced by the meat industry is maintaining the freshness of meat while extending its shelf life. Advanced packaging systems and food preservation techniques are highly beneficial in this regard. However, the energy crisis and environmental pollution demand an economically feasible and environmentally sustainable preservation method. Emulsion coatings (ECs) are highly trending in the food packaging industry. Efficiently developed coatings can preserve food, increase nutritional composition, and control antioxidants' release simultaneously. However, their construction has many challenges, especially for meat. Therefore, the following review focuses on the essential aspects of developing ECs for meat. The study begins by classifying emulsions based on composition and particle size, followed by a discussion on the physical properties, such as ingredient separation, rheology, and thermal characteristics. Furthermore, it discusses the lipid and protein oxidation and antimicrobial characteristics of ECs, which are necessary for other aspects to be relevant. Lastly, the review presents the limitations of the literature while discussing the future trends. ECs fabricated with antimicrobial/antioxidant properties present promising results in increasing the shelf life of meat while preserving its sensory aspects. In general, ECs are highly sustainable and effective packaging systems for meat industries.

Fabrication of edible solid lipid nanoparticle from beeswax/propolis wax by spontaneous emulsification: Optimization, characterization and stability

In the current study, the production and characterization of novel solid lipid nanoparticles (SLNs) using safe/low-cost natural beeswax (BW) and propolis wax (PW) and by the simple and inexpensive assay of spontaneous emulsification were studied. To fabricate SLNs, the optimum levels of surfactant/oil ratio (SOR), stirring speed, and time were obtained based on minimum particle size (PS) and polydispersity index (PDI). Therefore, the optimal conditions to produce PW and BW nanoparticles were SOR of 1.26 and 2 under stirring speed of 1050 rpm for 20 min, leading to PS of 21.9 and 23.2 nm, respectively. The contact angle of 73.7° and 62.9° for BW and PW SLNs respectively, showed suitable hydrophilicity to stabilize oil-in-water (O/W) Pickering emulsions. Temperatures over 70 °C led to a drastic increment of PS in both types of SLNs. Upon nanoparticles drying, the utilization of cryoprotectants could cause less aggregation and better reconstitution.

Development of hemp seed oil nanoemulsions loaded with ascorbyl palmitate: Effect of operational parameters, emulsifiers, and wall materials

The perceived health properties of hemp seed oil, as one of the few plant-basedsources of omega-3 and omega-6 fatty acids with an ideal ratio of 1:3, suggest its incorporation in food-grade emulsions to improve its water solubility and oxidative stability. The current research's main aim was nanoemulsification of hemp seed oil using the oil-in-water emulsification method followed by ultrasonication. The entrapment efficiency of the nanoemulsions for antioxidant ascorbyl palmitate and its impact on oxidative stability of the oil was also evaluated. Gum arabic: maltodextrin in 75:25 ratio could result in nanoemulsion with entrapment efficiency of 97.10 % for ascorbyl palmitate and radical scavenging activity of oil-soluble bioactives of 92.13 %. Moreover, incorporation of ascorbyl palmitate could effectively retard the oxidation, specifically in nanoemulsions containing gum Arabic. The optimum formulation of nanoemulsion having an average droplet size of 293 nm can be applied as an ideal vegetarian source of omega-3 fatty acids.

Fingolimod Nanoemulsions at Different Particle Sizes Define the Fate of Spinal Cord Injury Recovery

Spinal cord injury (SCI) is a debilitating condition for which no definitive treatment has yet been identified. Notably, it influences other tissues through inflammatory reactions and metabolic disturbances. Therefore, fingolimod (FTY-720), as an FDA-approved inflammatory modulator, would be promising. In the present study, nanocarriers with two distinct monodisperse particle sizes of 60 (nF60) and 190 (nF190) nm were prepared via low-(stirring) and high-energy (probe ultrasound) emulsion oil in water (O/W) methods. Larger nanocarriers showed higher EE% and sustained-release profile than smaller nanocarriers. Neural stem cell (NSC) viability and lactate dehydrogenase (LDH) release were studied in the presence of nanocarriers and free FTY-720. The results indicated that nanocarriers and free FTY-720 enhanced NSC viability compared with the control group. However, nF190 induced significantly less cell membrane damage than nF60. Nanocarriers and free FTY-720 enhanced motor neuron recovery in SCI rats, while body weight and return to bladder reflux by nF190 were significantly higher than those in the nF60 group. Return to bladder reflux might be due to the role of FTY-720 in the regulation of detrusor muscle tone and preservation of the integrity of vessels by acting on endothelial cells. Moreover, nF190 gained higher soleus muscle weight than the free drugs; probably decreasing proinflammatory cytokines in the soleus diminishes muscular atrophy in SCI rats. In summary, it might be said that larger nanocarriers with sustained-release profile and less cell membrane damage seem to be more efficient than smaller ones to manage SCI and enhance bladder reflux. These data will help pharmaceutical companies select the correct particle size for nanodrugs and develop more efficient drug formulations to treat SCI.

A New Control Strategy for High-Pressure Homogenization to Improve the Safety of Injectable Lipid Emulsions

Intravenous lipid emulsions are biocompatible formulations used as clinical nutrition products and lipid-based delivery systems for sparingly soluble drugs. However, the particle-size distribution is associated with risks of embolism. Accordingly, the mean particle diameter (MPD) and particle-distribution tailing (characterized as the pFAT5 value) are critical quality attributes that ensure patient safety. Compliance with the limits stated in the United States Pharmacopoeia is ensured by high-pressure homogenization, the final step of the manufacturing process. The US Food and Drug Administration’s Quality-by-Design approach requires a control strategy based on deep process understanding to ensure that products have a consistent and predefined quality. Here we investigated the process parameters of a jet-valve high-pressure homogenizer, specifically their effect on the MPD, pFAT5 value and droplet count (determined by microscopy) during the production of a Lipofundin MCT/LCT 20% formulation. We provide deep insight into droplet breakup and coalescence behavior when varying the process pressure, emulsion temperature and number of homogenization cycles. We found that high shear forces are not required to reduce the pFAT5 value of the particle distribution. Finally, we derived a control strategy for a rapid and cost-efficient two-cycle process that ensures patient safety over a large control space.

Microemulsion: a novel alternative technique for edible oil extraction_a mechanistic viewpoint

Microemulsions, as isotropic, transparent, nano size (<100 nm), and thermodynamically stable dispersions, are potentially capable of being used in food formulations, functional foods, pharmaceuticals, and in many other fields for various purposes, particularly for nano-encapsulation, extraction of bioactive compounds and oils, and as nano-reactors. However, their functionalities, and more importantly their oil extraction capability, strongly depend on, and are determined by, their formulation, molecular structures and the type, ratio and functionality of surfactants and co-surfactants. This review extensively describes microemulsions (definition, fabrication, thermodynamic aspects, and applications), and their various mechanisms of oil extraction (roll-up, snap-off, and solubilization including those by Winsor Types I, II, III, and IV systems). Applications of various food grade (natural or synthetic) and extended surfactants for edible oil extraction are then covered based on these concepts.

Lecithins: A comprehensive review of their properties and their use in formulating microemulsions

Lecithins are a phospholipid-rich mixture recovered from the degumming process of crude vegetable oils. Since the nineteenth century, this by-product of oil processing has been used as a food and pharmaceutical ingredient. Lecithins' popularity as an ingredient in the pharmaceutical and food industries arises from their particular properties, such as their hydrophilic-lipophilic balance, critical micellar concentration, and assembly properties. However, there is limited knowledge of the use of lecithins to formulate pharmaceutical- and food-grade microemulsions. Unlike conventional emulsions, microemulsions are thermodynamically stable systems that offer long-term stability. Besides, microemulsions show nano-sized droplets, transparency, ease of preparation and scale-up, and do not require expensive equipment. This review aims to provide a comprehensive overview of lecithins, their properties, and their use in formulating microemulsions, a promising method to incorporate, protect, and deliver bioactive compounds in pharmaceutical and food products. PRACTICAL APPLICATIONS: Lecithins are a phospholipid-rich mixture recovered from the degumming process of crude vegetable oils. Since the nineteenth century, this by-product of oil processing has been used as a food ingredient. Lecithin phospholipids are commonly used as emulsifier agents in the food and pharmaceutical industries because of their particular properties. However, there is limited knowledge of the use of lecithins to formulate pharmaceutical- or food-grade microemulsions. Unlike conventional emulsions, microemulsions are stable systems that offer long-term stability, nano-sized droplets, transparency, ease of preparation and scale-up, and do not require expensive equipment. This review aims to provide a comprehensive overview of lecithins, their properties, and their use in formulating microemulsions, a promising method to incorporate, protect, and deliver bioactive compounds such as vitamins, flavors, antioxidants, nutrients, colors, antimicrobials, and polyphenols.

Proposed Methods for Testing and Comparing the Emulsifying Properties of Proteins from Animal, Plant, and Alternative Sources

The food industry is trying to reformulate many of its products to replace functional ingredients that are chemically synthesized or isolated from animal sources (such as meat, fish, eggs, or milk) with ingredients derived from plant or microbial sources. This effort is largely a result of the demand for foods that are better for the environment, human health, and animal welfare. Many new kinds of plant- or microbial-derived proteins are being isolated for potential utilization as functional ingredients by the food industry. A major challenge in this area is the lack of standardized methods to measure and compare the functional performance of proteins under conditions they might be used in food applications. This information is required to select the most appropriate protein for each application. In this article, we discuss the physicochemical principles of emulsifier functionality and then present a series of analytical tests that can be used to quantify the ability of proteins to form and stabilize emulsions. These tests include methods for characterizing the effectiveness of the proteins to promote the formation and stability of the small droplets generated during homogenization, as well as their ability to stabilize the droplets against aggregation under different conditions (e.g., pH, ionic composition, temperature, and shearing). This information should be useful to the food industry when it is trying to identify alternative proteins to replace existing emulsifiers in specific food applications.

Physicochemical Upgrading of a Biodetergent for Application in the Industrial Energy Sector

In the industries across the petroleum chain and those involved in energy generation, the use of petroderivatives as fuel oils is common. To clean parts, equipment and environments contaminated by hydrocarbons, they use expensive, toxic products, bringing risks to the environment as well as to workers’ health. Thus, the aim of this study was to check the stability of a biodetergent prepared using atoxic substances for large-scale production and industrial energy sector application. The relationship between volume (4 to 10 L) and stirring time (5 to 10 min) of the formulation at 3200 rpm and 80 °C was evaluated. The hydrophilic lipophilic balance (HLB), long-term stability (365 days), toxicity and efficiency of low-sulfur, viscous fuel oil removal from metal pieces and floors were investigated. The interaction among operating conditions was shown to influence the features of the product, which achieved approximately 100% stability after a stirring time of 7 min. The emulsion HBL index varied between 4.3 and 11.0. The biodetergent maintained its physicochemical properties during its 365 days of storage and showed high efficiency, removing 100% of the OCB1 impregnated on the metallic surfaces and floors tested. The formulation showed reliability in scale up when submitted to the study of physicochemical factors in the productive process, and safe application, by reducing risks for workers’ health and environment.

Advances in biopolymeric active films incorporated with emulsified lipophilic compounds: a review

The attention towards active films has increased due to consumer demand for high-quality foods without chemical additives. Active biopolymer-based films have shown great potential for active films by impacting food safety, acting as the carriers of various natural antioxidant and antimicrobial compounds, and decreasing environmental pollution from petrol-derived packaging materials. However, there is a wide range of challenges concerning the different characteristics of biopolymers and plasticizers, often hygroscopic/hydrophilic, compared to numerous lipophilic bioactive compounds. Therefore, recent studies have focused on applying oil-in-water emulsion-based systems to enhance the lipophilic bioactive compounds' dispersibility into the film matrix, improving their performance. It is worth emphasizing that resulting complex systems give rise to new challenges such as (i) dispersion technology of the bioactive compounds with minimum adverse effects on its bioactivities, (ii) interactions between different components of the active films, giving rise to new physicochemical properties, and (iii) the change of the diffusion properties of bioactive compounds into the active films, resulting in different release properties. These challenges are profound and critically discussed in this review, as well as the encapsulation techniques employed in preparing emulsions loaded with lipophilic bioactive compounds for the active film development. An outlook of future directions in the research, development, and application of these active films are given.

Development of a Spontaneous Emulsifying Technique Using Porous Microparticles with Water-soluble Polymers

A novel spontaneous emulsification method using porous polymer particles was investigated for the facile preparation of emulsions without mechanical manipulation. Porous water-soluble polymer particles prepared by spray freeze-drying could absorb soybean oil via capillary action. When the particles were added to water, emulsification proceeded rapidly with the dissolution of the polymer. The importance of using a water-soluble polymer for particle formation for the formation of fine emulsions and maintenance of dispersibility was confirmed. This emulsification technology is expected to be applied to the development of formulations that improve the solubility and mucosal absorption of poorly water-soluble drugs.

Discrete-Impulse Energy Supply in Milk and Dairy Product Processing

The efficient use of supplied energy is the basis of the discrete-impulse energy supply (DIES) concept. In order to explore the possibility of using DIES to intensify the hydromechanical processes, the emulsification of milk fat (homogenization of milk, preparation of spreads) and, in particular, the processing of cream cheese masses, were studied. Whole non-homogenized milk, fat emulsions, and cream cheese mass were the object of investigation. To evaluate the efficiency of milk homogenization, the homogenization coefficient change was studied, which was determined by using the centrifugation method, as it is the most affordable and accurate one. To provide the proper dispersion of the milk emulsion, six treatment cycles must be carried out under the developed cavitation mode in a static-type apparatus, here resulting in a light grain-like consistency, and exhibiting the smell of pasteurized milk. The emulsions were evaluated according to the degree of destabilization, resistance and dispersion of the fat phase. On the basis of the obtained data with respect to the regularities of fat dispersion forming in the rotor-type apparatus, the proper parameters required to obtain technologically stable fat emulsion spreads, possessing a dispersion and stability similar to those of plain milk creams, were determined. It was determined that under the DIES, an active dynamic effect on the milk globules takes place. The rheological characteristics of cheese masses were evaluated on the basis of the effective change in viscosity. The effect of the mechanical treatment on the structure of the cheese masses was determined.

Quality by Design Methodology Applied to Process Optimization and Scale up of Curcumin Nanoemulsions Produced by Catastrophic Phase Inversion

In the presented study, we report development of a stable, scalable, and high-quality curcumin-loaded oil/water (o/w) nanoemulsion manufactured by concentration-mediated catastrophic phase inversion as a low energy nanoemulsification strategy. A design of experiments (DoE) was constructed to determine the effects of process parameters on the mechanical input required to facilitate the transition from the gel phase to the final o/w nanoemulsion and the long-term effects of the process parameters on product quality. A multiple linear regression (MLR) model was constructed to predict nanoemulsion diameter as a function of nanoemulsion processing parameters. The DoE and subsequent MLR model results showed that the manufacturing process with the lowest temperature (25 °C), highest titration rate (9 g/minute), and lowest stir rate (100 rpm) produced the highest quality nanoemulsion. Both scales of CUR-loaded nanoemulsions (100 g and 500 g) were comparable to the drug-free optimal formulation with 148.7 nm and 155.1 nm diameter, 0.22 and 0.25 PDI, and 96.29 ± 0.76% and 95.60 ± 0.88% drug loading for the 100 g and 500 g scales, respectively. Photostability assessments indicated modest loss of drug (<10%) upon UV exposure of 24 h, which is appropriate for intended transdermal applications, with expected reapplication of every 6-8 h.

Recent Developments on Surfactants for Enhanced Oil Recovery

This review discusses surfactants used for chemical flooding, including surfactant-polymer flooding and alkali-surfactant-polymer flooding. The review, unlike most previous reviews in the field, has a surfactant focus, not a focus on the flooding process. It deals with recent results, mainly from 2010 and onward. Older literature is referred to when needed in order to put more recent findings into a perspective.

Effect of different structural flaxseed lignans on the stability of flaxseed oil-in-water emulsion: An interfacial perspective

The influences of the different structural flaxseed lignans on flaxseed oil (FO) emulsions during storage and digestion were investigated, focusing on their interfacial behavior. From perspective of interface, more than 60% of secoisolariciresinol (SECO) and the acidic hydrolysates of flaxseed lignan macromolecule (FLEH) were located on the interface of FO emulsions. It improved the stability of FO emulsions both during storage and digestion by inhibiting of free radical penetration and improving their targeted antioxidative activity. By comparison, the secoisolariciresinol diglucoside (SDG) and the alkaline hydrolysates of flaxseed lignan macromolecule (FLE) largely located in the aqueous and exerted lower antioxidative efficiency in emulsions. Moreover, SDG, SECO, FLE and FLEH slowed down the digestive rate of FO in emulsions, which might be due to flaxseed lignans inhibited the activity of digestive enzymes. These findings suggested that the different structural flaxseed lignans had the potential as antioxidants in emulsions during storage and digestion.

Preparation and evaluation of food-grade nanoemulsion of tarragon (Artemisia dracunculus L.) essential oil: antioxidant and antibacterial properties

This study aimed at to formulate a food-grade nanoemulsion of tarragon essential oil (NEO) and investigate its antioxidant and antimicrobial properties. Oil in water NEO was formed by blending 10% of tarragon EO (TEO), 85% water, and a mixture of 5% surfactants, then antioxidant and antimicrobial activities were evaluated. The main components of TEO were estragole, beta-cis-ocimene, beta-trans-ocimene, and l-limonene. NEO droplet had a diameter of 50 nm and a zeta potential of - 30 mV. Results of free radical DPPH scavenging activity revealed that hydrogen donating capacity of the nanoemulsion was significantly higher than TEO and at 2.5 µg/mL concentration it showed complete inhibitory activity against DPPH. The ferric reducing potential was almost similar for TEO and NEO. NEO showed higher antibacterial potential against Staphylococcus aureus and Listeria monocytogenes and Shigella dysenteriae. The results of this work indicated that NEO had higher antioxidant and antimicrobial activity compared with free TEO.

The Creaming of Short Doughs and Its Impact on the Quality Attributes of Rotary-Molded Biscuits

Scant attention has been given to understanding the impact of creaming stability on the final structure of semi-sweet biscuits, an aspect that has traditionally concerned the biscuit industry. Accordingly, the aim of this study was to analyze the influence of the creaming phase stability on the quality attributes of rotary-molded biscuits. Doughs were formulated with 10.2% of fat (wet basis) and 16.3% of sucrose (w.b.), using two sucrose particle sizes, which were either added directly or after dilution in water at different concentrations. Additionally, the creaming phase was prepared using either a low-shear or a high-shear mixer. The results show that an aqueous-phase migration occurred when the creaming was blended in a low-shear mixer, when using either powdered sucrose or granular sucrose diluted in water at a high concentration. The phase separation was inhibited with the high-shear mixer, which provided a stable creaming. Notwithstanding the variation in creaming stability, no differences were observed in hardness, aeration, sweetness, color and noise intensity. Additionally, the micro-CT analysis revealed that biscuits had a similar microstructure (air porosity and thickness of biscuit walls) when they were prepared with either an unstable or a stable creaming phase. Consequently, creaming stability does not seem to affect the structure and the most relevant sensory attributes of rotary-molded biscuits under this set of experimental conditions, which are representative of those used by the industry for this product category.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Advances of spontaneous emulsification and its important applications in enhanced oil recovery process

Emulsions, including oil-in-water (O/W) and water-in-oil (W/O) emulsions, can play important roles in both controlling reservoir conformance and displacing residual oil for enhanced oil recovery (EOR) projects. However, current methods, like high-shear mixing, high-pressure homogenizing, sonicators and others, often use lots of extra energy to prepare the emulsions with high costs but very low energy efficiency. In recent decades, spontaneous emulsification methods, which allow one to create micro- and nano-droplets with very low or even no mechanical energy input, have been launched as an overall less expensive and more efficient alternatives to current high extra energy methods. Herein, we primarily review the basic concepts on spontaneous emulsification, including mechanisms, methods and influenced parameters, which are relevant for fundamental applications for industrials. The spontaneity of the emulsification process is influenced by the following variables: surfactant structure, concentration and initial location, oil phase composition, addition of co-surfactant and non-aqueous solvent, as well as salinity and temperature. Then, we focus on the description of importance for emulsions in EOR processes from advances and categories to improving oil recovery mechanisms, including both sweep efficiency and displacement efficiency aspects. Finally, we systematically address the applications and outlooks based on the use of spontaneous emulsification in the practical oil reservoirs for EOR processes, in which conventional, heavy, high-temperature, high-salinity and low-permeability oil reservoirs, as well as wastewater treatments after EOR processes are involved.

Anthocyanins: New techniques and challenges in microencapsulation

Anthocyanins are a bioactive compound belonging to the flavonoid classthatis present in human nutrition through plant-based foods. Due to their antioxidant properties, several health benefits related to their consumption are reported in the literature. The stability of the color and the properties of anthocyanins is strongly affected by pH, solvent, temperature, and other environmental conditions. In addition, the insufficient residence time of anthocyanins in the upper digestive tract causes apartialabsorption, which needs to be improved. These factshave led researchers to investigate new forms of processing that provide minimal degradation. Microencapsulation is a promising possibility to stabilize anthocyanin extracts and allow their addition to food products in a more stable form. The microcapsules can still provide a prolonged gastrointestinal retention time caused by the improvement of the bioadhesive properties in the mucus covering the intestinal epithelium. Although there are efficient and emerging techniques, anthocyanins microencapsulation is still a challenge for the food industry. The purpose of this work is to provide an overview of anthocyanins structure, absorptionand protection, and to show the main conventional and emerging microencapsulation methods and their pros and cons.

Influence of Ethanol on Emulsions Stabilized by Low Molecular Weight Surfactants

Abstract

The effect of ethanol on oil‐in‐water emulsions stabilized with low molecular weight surfactants was investigated. Oil‐in‐water emulsions were prepared containing varying percentages of ethanol and sunflower oil, and stabilized with different emulsifiers (Tween 20, Tween 80, and Lecithin). Droplet size, viscosity, density, and interfacial tension measurements were carried out. The droplet size of emulsions stabilized by each of the surfactants studied decreased with the addition of ethanol to the aqueous phase showing a minimum at a concentration of ethanol around 40%. The trend in droplet size is accompanied by a decrease in the interfacial tension between water and oil as the ethanol concentration increases. Viscosity measurements show that the change in viscosity of the final emulsion is the result of the change in viscosity of the continuous phase, as well as the change in solubility of the surfactants due to the addition of ethanol. The density of the continuous phase decreases with the addition of ethanol and it is possible to match the densities of the two phases in order to reduce the effect of creaming/sedimentation and improve stability. This study provides scientific evidence for the formulation of stable emulsions containing a range of ethanol form 0 to 40%.

Practical Application

Formation and stability of food‐grade emulsions in the presence of ethanol.

Chitosan dispersed in aqueous solutions of acetic, glycolic, propionic or lactic acid as a thickener/stabilizer agent of O/W emulsions produced by ultrasonic homogenization

Chitosan is a natural polycationic polysaccharide with several known biotechnological functionalities, but its application in food products as ingredient or additive remains nowadays unusual. Additionally, ultrasonic production of food-grade emulsions is still an open research field, so ultrasound applicability for such purpose must be evaluated case by case. In this study, chitosan was dispersed in acid aqueous media containing acetic, glycolic, propionic or lactic acid (50 mmol·L^-1), then added of the emulsifier Tween 20, and finally mixed to sunflower oil, through ultrasonic homogenization (20 kHz, 500 W, 4 min), in order to prepare O/W emulsions (oil fraction = 0.25). In all studied systems, oil droplets with average hydrodynamic diameter < 600 nm were obtained. The increase of chitosan concentration promoted the augment in consistency and the elastic character of the emulsions. Emulsions containing more than 0.500 g·(100 g)^-1 of chitosan presented a minor increase of both oil droplets average hydrodynamic diameter and PDI, during storage for 28 days. Furthermore, such systems showed no phase separation when exposed to centrifugation, freeze-thawing, and freeze-thaw-heating cycles. Two main findings may be highlighted from this study: i) ultrasound processing is a promising approach to produce food-grade emulsified systems containing chitosan, and ii) chitosan is a suitable alternative as thickener/stabilizer for acidic emulsions, being its performance influenced by the biopolymer concentration and not by the organic acid present in the medium.

Water-in-oil organogel based emulsions as a tool for increasing bioaccessibility and cell permeability of poorly water-soluble nutraceuticals

The use of organogels in food and pharmaceutical sciences has several technical problems related with restricted diffusion of the drugs and lack of a proper gelator molecule. These features are important into the new product design. An alternative to improve technological properties in organogels is the use of emulsions. However, there is a lack of knowledge about the behavior on bioaccessibility and permeability of bioactives loaded into organogel-based emulsions. The objective of the present experimental work was to study the physical properties of organogel-based emulsions made with vegetable oil loaded with three different bioactives (betulin, curcumin and quercetin) and the influence on their bioaccessibility. Organogels were made of canola or coconut oils and myverol as gelator (10% w/w). Water-in-oil emulsions (at 5, 10 and 12.5 wt% of water content) were prepared by mixing the melted proper organogel and water (80 °C) under high shear conditions (20,000 rpm). Micrographs, rheological tests (amplitude, frequency, temperature sweeps and creep-compliance measurements), DSC and particle size analysis were performed to samples. In vitro digestion (oral, gastric and intestinal phase), lipolysis assays, bioaccessibility and permeability tests by cell culture of Caco-2 were made. Organogels of coconut oil have shown poor emulsification properties.