The application of PEF technology in food processing and human nutrition

Effect of pulsed electric field treated on quality of curd

Pulsed electric field (PEF) is a potential pre-treatment technique to improve the quality of milk by reducing its microbial load. The present study aims at addressing this issue with respect to a popular fermented dairy product, that is, curd. Milk was treated with high voltage and frequency (55 kV and 90 Hz) square waves of pulse width 900 µs for 100 s. Curd samples were prepared with conventional heat treatment (CHT), PEF-treated milk subjected to CHT (PT-CHT), and PEF-treated milk (PT). PT samples resulted in curd with higher acidity (0.17 ± 0.005% LA) and microbial load (6.65 ± 0.27 log CFU/g), while the PT-CHT samples resulted in curd with better whey holding capacity. The firmness recorded for CHT, PT-CHT, and PT was 1.15 ± 0.05, 1.32 ± 0.04, and 0.91 ± 0.03 N, respectively. PT-CHT showed a higher viscosity index, that is, 0.207 ± 0.005 g. Sensorial properties showed the acidic nature of PT-curd with greater syneresis and softer texture resulted in its poorer sensory scores for texture. Shelf-life analysis showed no significant difference between curd prepared using the CH and PT-CHT up to 12 days. The study demonstrated the potential of employing PEF with CHT for improving the texture and shelf life of curd without impacting its quality.

Impact of Metabolites from Foodborne Pathogens on Cancer

Foodborne pathogens are microorganisms that cause illness through contamination, presenting significant risks to public health and food safety. This review explores the metabolites produced by these pathogens, including toxins and secondary metabolites, and their implications for human health, particularly concerning cancer risk. We examine various pathogens such as Salmonella sp., Campylobacter sp., Escherichia coli, and Listeria monocytogenes, detailing the specific metabolites of concern and their carcinogenic mechanisms. This study discusses analytical techniques for detecting these metabolites, such as chromatography, spectrometry, and immunoassays, along with the challenges associated with their detection. This study covers effective control strategies, including food processing techniques, sanitation practices, regulatory measures, and emerging technologies in pathogen control. This manuscript considers the broader public health implications of pathogen metabolites, highlighting the importance of robust health policies, public awareness, and education. This review identifies research gaps and innovative approaches, recommending advancements in detection methods, preventive strategies, and policy improvements to better manage the risks associated with foodborne pathogens and their metabolites.

Pulsed Electric Fields Effects on Proteins: Extraction, Structural Modification, and Enhancing Enzymatic Activity

Pulsed electric field (PEF) is an innovative physical method for food processing characterized by low energy consumption and short processing time. This technology represents a sustainable procedure to extend food shelf-life, enhance mass transfer, or modify food structure. The main mechanism of action of PEF for food processing is the increment of the permeability of the cell membranes by electroporation. However, it has also been shown that PEF may modify the technological and functional properties of proteins. Generating a high-intensity electric field necessitates the flow of an electric current that may have side effects such as electrochemical reactions and temperature increments due to the Joule effect that may affect food components such as proteins. This article presents a critical review of the knowledge on the extraction of proteins assisted by PEF and the impact of these treatments on protein composition, structure, and functionality. The required research for understanding what happens to a protein when it is under the action of a high-intensity electric field and to know if the mechanism of action of PEF on proteins is different from thermal or electrochemical effects is underlying.

Mechanistic understanding of the improved drying characteristics and quality attributes of lily (Lilium lancifolium Thunb.) by modified microstructure after pulsed electric field (PEF) pretreatment

The effects of the non-thermal (pulsed electric field, PEF) and thermal pretreatment (vacuum steam pulsed blanching, VSPB) on the drying kinetics, quality attributes, and multi-dimensional microstructure of lily scales were investigated. The results indicate that both PEF and VSPB pretreatments improved the drying rate compared to untreated lily scales. Specifically, PEF pretreatment reduced the drying time by 29.58 % - 43.60 %, while VSPB achieved a 46.91 % reduction in drying time. PEF treatment facilitated the enhanced leaching of phenols and flavonoids compared to VSPB treated samples, thereby increasing antioxidant activity. The rehydration ratio of the dried lilies was improved with PEF and VSPB treatment, which closely related to the microstructure. Weibull distribution and Page model demonstrated excellent fit for the drying and rehydration kinetics of lily scales, respectively (R2 > 0.993). The analysis of multi-dimensional microstructure and ultrastructure confirmed the variations in moisture migration and phytochemical contents among different treatments. Consequently, this study offers insights into the technological support for the potential of non-thermal pretreatment in fruits and vegetables.

Possible interactions between selected food processing and medications

The impact of food processing on drug absorption, metabolism, and subsequent pharmacological activity is a pressing yet insufficiently explored area of research. Overlooking food-processing-drug interactions can significantly disrupt optimal clinical patient management. The challenges extend beyond merely considering the type and timing of food ingestion as to drug uptake; the specific food processing methods applied play a pivotal role. This study delves into both selected thermal and non-thermal food processing techniques, investigating their potential interference with the established pharmacokinetics of medications. Within the realm of thermal processing, conventional methods like deep fat frying, grilling, or barbecuing not only reduce the enteric absorption of drugs but also may give rise to side-products such as acrylamide, aldehydes, oxysterols, and oxyphytosterols. When produced in elevated quantities, these compounds exhibit enterotoxic and pro-inflammatory effects, potentially impacting the metabolism of various medications. Of note, a variety of thermal processing is frequently adopted during the preparation of diverse traditional herbal medicines. Conversely, circumventing high heat through innovative approaches (e.g., high-pressure processing, pulsed electric fields, plasma technology), opens new avenues to improve food quality, efficiency, bioavailability, and sustainability. However, it is crucial to exercise caution to prevent the excessive uptake of active compounds in specific patient categories. The potential interactions between food processing methods and their consequences, whether beneficial or adverse, on drug interactions can pose health hazards in certain cases. Recognizing this knowledge gap underscores the urgency for intensified and targeted scientific inquiry into the multitude of conceivable interactions among food composition, processing methods, and pharmaceutical agents. A thorough investigation into the underlying mechanisms is imperative. The complexity of this field requires substantial scrutiny and collaborative efforts across diverse domains, including medicine, pharmacology, nutrition, food science, food technology, and food engineering.

Antibiotic's target site affects the potentiation of Lactiplantibacillus plantarum inhibition and inactivation by electroporation

Introduction

Antibiotic resistance represents a growing global threat, and thus the motivation to develop novel and combined methods of bacterial inactivation is increasing. Electroporation is a technique in which electric pulses of sufficient strength are applied to permeabilize cells, including bacteria. Combining antibacterials with electroporation is a promising strategy to potentiate their bactericidal and bacteriostatic effectiveness. This approach has already proved useful for increasing bacterial inactivation, yet most studies so far have mainly focused on the maximal achievable effects, and less on the underlying mechanisms. We recently demonstrated that in the Gram-negative (G-) bacterium Escherichia coli, electroporation potentiates antibacterials targeting the peptidoglycan wall more than those with intracellular targets. However, in Gram-positive (G+) bacteria, the wall is directly accessible from the outside, and thus the dependence of potentiation on the antibacterial's target may be rather different. Here, we compare the inactivation and growth inhibition of the G+ bacterium Lactiplantibacillus plantarum for two antibiotics with different modes of action: ampicillin (inhibits cell-wall synthesis) and tetracycline (inhibits intracellular protein synthesis).

Methods

We used antibiotic concentrations ranging from 0 to 30 × MIC (minimum inhibitory concentration that we predetermined for each antibiotic), a single 1-ms electric pulse with an amplitude from 0 to 20 kV/cm, and post-pulse pre-dilution incubation of 24 h or 1 h.

Results

Electroporation increased the inhibition and inactivation efficiency of both antibiotics, but this was more pronounced for tetracycline, with statistical significance mostly limited to 24-h incubation. In general, both inhibition and inactivation grew stronger with increasing antibiotic concentration and electric field amplitude.

Discussion

Our results indicate that electroporation potentiates inactivation of G+ bacteria to a larger extent for antibiotics that inhibit intracellular processes and require transport into the cytoplasm, and to a smaller extent for antibiotics that inhibit cell-wall synthesis. This is the inverse of the relation observed in G- bacteria, and can be explained by the difference in the envelope structure: in G- bacteria the outer membrane must be breached for wall-inhibiting antibiotics to access their target, whereas in G+ bacteria the wall is inherently accessible from the outside and permeabilization does not affect this access.

High-Power Ultrasound (HPU) and Pulsed Electric Field (PEF) in the Hurdle Concept for the Preservation of Antioxidant Bioactive Compounds in Strawberry Juice-A Chemometric Evaluation-Part II

In this work, the influence of high-power ultrasound (HPU) followed by pulsed electric field (PEF) in the hurdle concept (HPU + PEF) on the content of biologically active compounds (BACs) and antioxidant activity in strawberry juices stored at 4 °C/7 days was investigated. The HPU was performed with an amplitude of 25% and pulse of 50% during 2.5, 5.0 and 7.5 min, while the PEF was performed with an electric field strength of 30 kV cm-1 and frequency of 100 Hz during 1.5, 3 and 4.5 min. The results obtained indicate that the synergy of the mechanisms of action for technologies in the hurdle concept plays a critical role in the stability of BACs and antioxidant activity. Juices treated with HPU + PEF hurdle technology and kept at 4 °C for 7 days showed a statistically significant decrease in all BACs, antioxidant capacity and pH. Shorter HPU + PEF treatment times favored the preservation of BACs in juices. Regarding total phenolic compounds, flavonols, condensed tannins and antioxidant capacity, optimization of hurdle parameters showed that a shorter HPU treatment time of 2.5 min provided the best yield of these compounds. In summary, by optimizing and adjusting the parameters of the HPU/PEF technology, it is possible to produce functional strawberry juice.

Effect of Pulsed Electric Field Technology on the Composition and Bioactive Compounds of Black Soldier Fly Larvae Dried with Convective and Infrared-Convective Methods

In recent years, an increasing interest has been shown in alternative food sources. Many studies are focused on the use of insects. The aim of this study was to investigate the changes in the chemical and thermal properties of black soldier fly larvae influenced by the pulsed electric field (PEF) and convective (CD) or infrared-convective (IR-CD) drying techniques. Examinations of the basic chemical composition, properties of extracted fat (fatty acid composition, acid and peroxide values, and oxidative stability), total polyphenol content, antioxidant activity, allergen content, and thermogravimetric analysis (TGA) were performed. Generally, the results showed that dried black soldier fly larvae are a good source of protein and fat, up to 33% and 44%, respectively. The fat extracted from the dried insects consisted mainly of saturated fatty acids (above 75%), in particular lauric acid (C12:0). A good oxidative stability of the fat was also observed, especially from samples dried with the IR-CD method. The convective drying technique allowed for better preservation of protein content compared to samples dried with the IR-CD method. Nevertheless, samples treated with PEF were characterized by significantly lower protein content. The samples after PEF pretreatment, with an intensity of 20 and 40 kJ/kg and dried with the IR-CD method, were represented by a significantly higher total polyphenol content and antioxidant activity. Furthermore, in most cases, the convectively dried samples were characterized by a higher allergen content, both crustaceans and mollusks. Taking into account all of the investigated properties, it can be stated that the samples without treatment and those that were PEF-treated with an intensity of 40 kJ/kg and dried with the infrared-convective method (IR-CD) were the most rewarding from the nutritional point of view.

Effect of novel and conventional food processing technologies on Bacillus cereus spores

This chapter provides a summary of the effect of thermal and non-thermal processing technologies on Bacillus cereus spores, a well-known pathogenic bacterium associated with foodborne illnesses. B. cereus has been frequently detected in rice, milk products, infant food, liquid eggs products and meat products all over the world. This Gram positive, rod-shaped, facultative anaerobe can produce endospores that can withstand pasteurization, UV radiation, and chemical reagents commonly used for sanitization. B. cereus spores can germinate into vegetative cells that can produce toxins. The conventional regime for eliminating spores from food is retorting which uses the application of high temperature (121 °C). However, at this temperature, there could be a significant amount of loss in the organoleptic and functional qualities of the food components, especially proteins. This leads to the research on the preventive measures against germination and if possible, to reduce the resistance before using a non-thermal technology (temperatures less than retorting-121 °C) for inactivation. This chapter reviews the development and success of several food processing technologies in their ability to inactivate B. cereus spores in food.

Polyphenol Extraction from Food (by) Products by Pulsed Electric Field: A Review

Nowadays, more and more researchers engage in studies regarding the extraction of bioactive compounds from natural sources. To this end, plenty of studies have been published on this topic, with the interest in the field growing exponentially. One major aim of such studies is to maximize the extraction yield and, simultaneously, to use procedures that adhere to the principles of green chemistry, as much as possible. It was not until recently that pulsed electric field (PEF) technology has been put to good use to achieve this goal. This new technique exhibits many advantages, compared to other techniques, and they have successfully been reaped for the production of extracts with enhanced concentrations in bioactive compounds. In this advancing field of research, a good understanding of the existing literature is mandatory to develop more advanced concepts in the future. The aim of this review is to provide a thorough discussion of the most important applications of PEF for the enhancement of polyphenols extraction from fresh food products and by-products, as well as to discuss the current limitations and the prospects of the field.

Effect of Pulsed Electric Field Treatment on the Protein, Digestibility, and Physicochemical Properties of Starch Granules in Wheat Flour

The effect of pulsed electric field (PEF) treatment depends mainly on the electric field strength and treatment time. In this study, wheat flour-water suspensions were treated with PEF at an electric field strength of 3 kV/cm for 0 to 1400 pulses to obtain a specific energy input of 0 to 656 kJ/kg. The effect of PEF on the removal or unfolding of proteins from the starch surface, digestibility, starch granule structure, and physicochemical properties of wheat flour was studied. The removal of proteins from the surface and the damage to the internal structure of wheat starch granules after PEF treatment was detected by confocal laser scanning microscopy (CLSM) and FTIR. The damage of the PEF-treated wheat starch granules was observed by scanning electron microscopy (SEM). From CLSM results, penetration of dextran (Mw 10,000 Da) into starch granules of wheat flour was dependent on the energy input of PEF. The high the energy input showed the intense penetration of the biopolymer. The benefits of the accessibility of biopolymer in starch granules are to increase enzyme digestion, especially rapidly digestible starch (RDS). The RDS of wheat flour treated with PEF at 656 kJ/kg was 41.72%, whereas the RDS of wheat flour control was 27.59%.

Nano and Technological Frontiers as a Sustainable Platform for Postharvest Preservation of Berry Fruits

Berries are highly perishable and susceptible to spoilage, resulting in significant food and economic losses. The use of chemicals in traditional postharvest protection techniques can harm both human health and the environment. Consequently, there is an increasing interest in creating environmentally friendly solutions for postharvest protection. This article discusses various approaches, including the use of "green" chemical compounds such as ozone and peracetic acid, biocontrol agents, physical treatments, and modern technologies such as the use of nanostructures and molecular tools. The potential of these alternatives is evaluated in terms of their effect on microbial growth, nutritional value, and physicochemical and sensorial properties of the berries. Moreover, the development of nanotechnology, molecular biology, and artificial intelligence offers a wide range of opportunities to develop formulations using nanostructures, improving the functionality of the coatings by enhancing their physicochemical and antimicrobial properties and providing protection to bioactive compounds. Some challenges remain for their implementation into the food industry such as scale-up and regulatory policies. However, the use of sustainable postharvest protection methods can help to reduce the negative impacts of chemical treatments and improve the availability of safe and quality berries.

The Impact of Pulsed Electric Fields on Milk's Macro- and Micronutrient Profile: A Comprehensive Review

Consumers around the world are attracted to products with beneficial effects on health. The stability, functionality, and integrity of milk constituents are crucial determinants of product quality in the dairy industry. Milk contains macronutrients and micronutrients that aid in a wide range of physiological functions in the human body. Deficiencies of these two types of nutrients can confine growth in children and increase the risk of several diseases in adults. The influence of pulsed electric fields (PEF) on milk has been extensively reviewed, mostly concentrating on the inactivation of microbes and enzymes for preservation purposes. Therefore, the information on the variations of milk macro- and micronutrients treated by PEF has yet to be elucidated and it is imperative as it may affect the functionality, stability, and integrity of the milk and dairy products. In this review, we describe in detail the introduction, types, and components of PEF, the inactivation mechanism of biological cells by PEF, as well as the effects of PEF on macro- and micronutrients in milk. In addition, we also cover the limitations that hinder the commercialization and integration of PEF in the food industry and the future outlook for PEF. The present review consolidates the latest research findings investigating the impact of PEF on the nutritional composition of milk. The assimilation of this valuable information aims to empower both industry professionals and consumers, facilitating a thorough understanding and meticulous assessment of the prospective adoption of PEF as an alternative technique for milk pasteurization.

Advances in pulsed electric stimuli as a physical method for treating liquid foods

There is a need for alternative technologies that can deliver safe and nutritious foods at lower costs as compared to conventional processes. Pulsed electric field (PEF) technology has been utilised for a plethora of different applications in the life and physical sciences, such as gene/drug delivery in medicine and extraction of bioactive compounds in food science and technology. PEF technology for treating liquid foods involves engineering principles to develop the equipment, and quantitative biochemistry and microbiology techniques to validate the process. There are numerous challenges to address for its application in liquid foods such as the 5-log pathogen reduction target in food safety, maintaining the food quality, and scale up of this physical approach for industrial integration. Here, we present the engineering principles associated with pulsed electric fields, related inactivation models of microorganisms, electroporation and electropermeabilization theory, to increase the quality and safety of liquid foods; including water, milk, beer, wine, fruit juices, cider, and liquid eggs. Ultimately, we discuss the outlook of the field and emphasise research gaps.

Pulsed Electric Fields (PEF) and Accelerated Solvent Extraction (ASE) for Valorization of Red (Aristeus antennatus) and Camarote (Melicertus kerathurus) Shrimp Side Streams: Antioxidant and HPLC Evaluation of the Carotenoid Astaxanthin Recovery

Shrimp side streams represent an important natural source of astaxanthin. Optimization of the astaxanthin extraction process from shrimp side streams is of great importance for the valorization of crustacean side streams and the development of astaxanthin-related products. The combined and independent effects of two innovative extraction technologies (pulsed electric fields (PEFs) and accelerated solvent extraction (ASE)) alone and/or combined in a sequential step, using two different solvents on astaxanthin extraction from two shrimp species, were evaluated. Astaxanthin content in the extracts of shrimp side streams was determined by both spectrophotometric and HPLC assays, being the determination of the carotenoid profiles performed by HPLC analysis. Compared to a solvent extraction control procedure, the astaxanthin content was increased after ASE and PEF treatments, for both shrimp species, independently of the solvent used. The highest recovery (585.90 µg/g) was obtained for the species A. antennatus, with the solvent DMSO when PEF and ASE were combined, while the increase in antioxidant capacity varied depending on the solvent used. HPLC analysis of the samples revealed the presence of unesterified (all-E) astaxanthin, four unesterified Z isomers of astaxanthin and many unresolved astaxanthin esters. Both technologies are useful tools to recover antioxidant valuable carotenoids such as astaxanthin from shrimp side streams.

Effects of UV-C Irradiation and Vacuum Sealing on the Shelf-Life of Beef, Chicken and Salmon Fillets

One-third of the world's food supply is lost, with meat being a major contributor to this loss. Globally, around 23% of all meat and 35% of all seafood products are lost or wasted. Meats and seafood products are susceptible to microbial spoilage during processing, storage, and distribution, where microbial contamination causes significant losses throughout the supply chain. This study examined the efficacy of UV-C irradiation and vacuum-sealing in preventing microbiological deterioration in beef, chicken, and salmon fillets. The samples were sterilized using a constant UV-C irradiation dose of 360 J/m² and stored under a reduced pressure of 40 kPa. A microbiological analysis was conducted daily to examine the microbial contamination, which included counting the colonies of Pseudomonas spp., aerobic bacteria, lactic acid bacteria (LAB), Salmonella, and Escherichia coli, as well as monitoring the increase in pH levels. The results demonstrated a statistically significant difference (p > 0.05) in the aerobic bacteria counts between the storage conditions and storage days in all samples, which is a primary indicator of microbial spoilage. In contrast, the differences varied in the Pseudomonas spp. and LAB counts between the storage conditions and storage days, and there was no significant difference (p < 0.05) in the pH levels between the storage conditions. The results indicate that the combination of UV-C irradiation and vacuum sealing effectively inhibits microbial growth and extends the shelf-life of beef, chicken, and salmon fillets by 66.6%.

Recent advances and potentiality of postbiotics in the food industry: Composition, inactivation methods, current applications in metabolic syndrome, and future trends

Postbiotics are defined as "preparation of inanimate microorganisms and/or their components that confers a health benefit on the host". Postbiotics have unique advantages over probiotics, such as stability, safety, and wide application. Although postbiotics are research hotspots, the research on them is still very limited. This review provides comprehensive information on the scope of postbiotics, the preparation methods of inanimate microorganisms, and the application and mechanisms of postbiotics in metabolic syndrome (MetS). Furthermore, the application trends of postbiotics in the food industry are reviewed. It was found that postbiotics mainly include inactivated microorganisms, microbial lysates, cell components, and metabolites. Thermal treatments are the main methods to prepare inanimate microorganisms as postbiotics, while non-thermal treatments, such as ionizing radiation, ultraviolet light, ultrasound, and supercritical CO2, show great potential in postbiotic preparation. Postbiotics could ameliorate MetS through multiple pathways including the modulation of gut microbiota, the enhancement of intestinal barrier, the regulation of inflammation and immunity, and the modulation of hormone homeostasis. Additionally, postbiotics have great potential in the food industry as functional food supplements, food quality improvers, and food preservatives. In addition, the SWOT analyses showed that the development of postbiotics in the food industry exists both opportunities and challenges.

Effect of Pulsed Electric Field Pre-Treatment and the Freezing Methods on the Kinetics of the Freeze-Drying Process of Apple and Its Selected Physical Properties

The aim of this study was to investigate the effect of application of pulsed electric field (PEF) and different freezing methods (fast, slow and vacuum freezing) on the drying kinetics as well as selected physical properties of freeze-dried apple. The apples were subjected to PEF treatment with range of pulses from 0 to 160 and the intake energy from 0 to 1327 kJ·g⁻¹. Apples with and without PEF treatment were frozen with different rates and the freeze-dried. The water content, water activity and colour attributes of freeze-dried apples were investigated. Regression analysis and fitting procedures showed that among six different models, the Midilli et al. model the best described the drying curves of all dried samples. The highest value of the parameter L* = 71.54 was obtained for freeze-dried sample prepared without PEF pre-treatment and fast frozen. Application of PEF pre-treatment resulted in increase in browning index of freeze-dried apples (BI). The studies confirmed the positive effect of PEF on the freeze drying rate only in the case of the slow or fast freezing of the material after the application of low-energy PEF treatment. However, the increase in drying rate was also observed after application of slow and vacuum freezing of the material without PEF pre-treatment. These technologies can be recommended for optimization of the freeze drying process of apples. The statement that the freeze drying process with application of appropriately selected PEF processing parameters causing only partial destruction of cell membranes can be considered as an innovative contribution to the development of science about the possibilities of PEF application.

Effect of High Hydrostatic Pressure and Pulsed Electric Fields Processes on Microbial Safety and Quality of Black/Red Raspberry Juice

Black and red raspberries are fruits with a high phenolic and vitamin C content but are highly susceptible to deterioration. The effect of high hydrostatic pressure (HHP 400−600 MPa/CUT-10 min) and pulsed electric fields (PEF, frequency 100−500 Hz, pulse number 100, electric field strength from 11.3 to 23.3 kV/cm, and specific energy from 19.7 to 168.4 kJ/L) processes on black/red raspberry juice was studied. The effect on the inactivation of microorganisms and pectin methylesterase (PME) activity, physicochemical parameters (pH, acidity, total soluble solids (°Brix), and water activity (aw)), vitamin C and phenolic compounds content were also determined. Results reveal that all HHP-treatments produced the highest (p < 0.05) log-reduction of molds (log 1.85 to 3.72), and yeast (log 3.19), in comparison with PEF-treatments. Increments in pH, acidity, and TSS values attributed to compounds’ decompartmentalization were found. PME activity was partially inactivated by HHP-treatment at 600 MPa/10 min (22% of inactivation) and PEF-treatment at 200 Hz/168.4 kJ/L (19% of inactivation). Increment in vitamin C and TPC was also observed. The highest increment in TPC (79% of increment) and vitamin C (77% of increment) was observed with PEF at 200 Hz/168.4 kJ/L. The putative effect of HHP and PEF on microbial safety, enzyme inactivation, and phytochemical retention is also discussed in detail. In conclusion, HHP and PEF improve phytochemical compounds’ content, microbial safety, and quality of black/red raspberry juice.

Generation of garlic flavor after frying by infusing alliin into potato strips using pulsed electric field and assisted infusion methods

A new method of alliin infusion into potato strips to generate garlic flavor upon frying was investigated. Potato strips were treated using pulsed electric field (PEF) and then allin was infused into the treated strips using immersion, ultrasound, or vacuum assisted infusion. Results showed that under lower PEF intensities (0.250, 0.650 and 1.250 kJ/kg), assisted infusion methods significantly improve alliin infusion efficiency (p < 0.05). The kinetics for alliin infusion showed that 1.250 kJ/kg PEF treatment and 35 kHz ultrasound assisted infusion have the highest a values of 94.69 and 94.80 (mg/mL^.h), respectively. Scanning electron microscope (SEM) highlighted different cell structural changes before and after being treated with different PEF intensities and infusion methods. Sensory evaluations confirmed generation of garlic flavor upon frying (p < 0.05).

Application of CAD/CAM Technology in Electrochemical Relief Design and Processing of Ceramic Art

Ceramic relief modeling design and CNC machining programming have a wide range of applications in industrial production and daily life. In view of the actual needs of enterprises, this research studies the CAD simulation technology of ceramic relief and achieves the modeling of other pieces of relief based on the geometric outline of the plane breakthrough. According to geometric relief modeling, bitmap relief modeling, tool path selection, and relief simulation processing, the establishment of a ceramic relief model is realized. Finally, the simulation processing is carried out on the ArtCAM software platform, and reasonable processing parameters are obtained to realize the CNC engraving processing of ceramic relief. The experimental results show that the machining efficiency of the ceramic relief model established in this study is improved by 11.3% and 42.8%, respectively, compared with the two traditional methods, which verifies the correctness and superiority of the designed model.

The impact of aromatic plant-derived bioactive compounds on seafood quality and safety

Plant-derived bioactive compounds have been extensively studied and used within food industry for the last few decades. Those compounds have been used to extend the shelf-life and improve physico-chemical and sensory properties on food products. They have also been used as nutraceuticals due to broad range of potential health-promoting properties. Unlike the synthetic additives, the natural plant-derived compounds are more acceptable and often regarded as safer by the consumers. This chapter summarizes the extraction methods and sources of those plant-derived bioactives as well as recent findings in relation to their health-promoting properties, including cardio-protective, anti-diabetic, anti-inflammatory, anti-carcinogenic, immuno-modulatory and neuro-protective properties. In addition, the impact of applying those plant-derived compounds on seafood products is also investigated by reviewing the recent studies on their use as anti-microbial, anti-oxidant, coloring and flavoring agents as well as freshness indicators. Moreover, the current limitations of the use of plant-derived bioactive compounds as well as future prospects are discussed. The discoveries show high potential of those compounds and the possibility to apply on many different seafood. The compounds can be applied as individual while more and more studies are showing synergetic effect when those compounds are used in combination providing new important research possibilities.

The future of functional food: Emerging technologies application on prebiotics, probiotics and postbiotics

This review was the first to gather literature about the effect of emerging technologies on probiotic, prebiotic, and postbiotic products. Applying emerging technologies to probiotic products can increase probiotic survival and improve probiotic properties (cholesterol attachment, adhesion to Caco-2 cells, increase angiotensin-converting enzyme (ACE) inhibitory, antioxidant, and antimicrobial activities, and decrease systolic blood pressure). Furthermore, it can optimize the fermentation process, produce or maintain compounds of interest (bacteriocin, oligosaccharides, peptides, phenolic compounds, flavonoids), improve bioactivity (vitamin, aglycones, calcium), and sensory characteristics. Applying emerging technologies to prebiotic products did not result in prebiotic degradation. Still, it contributed to higher concentrations of bioactive compounds (citric and ascorbic acids, anthocyanin, polyphenols, flavonoids) and health properties (antioxidant activity and inhibition of ACE, α-amylase, and α-glucosidase). Emerging technologies may also be applied to obtain postbiotics with increased health effects. In this way, current studies suggest that emerging food processing technologies enhance the efficiency of probiotics and prebiotics in food. The information provided may help food industries to choose a more suitable technology to process their products and provide a basis for the most used process parameters. Furthermore, the current gaps are discussed. Emerging technologies may be used to process food products resulting in increased probiotic functionality, prebiotic stability, and higher concentrations of bioactive compounds. In addition, they can be used to obtain postbiotic products with improved health effects compared to the conventional heat treatment.

Ifs and buts of non-thermal processing technologies for plant-based drinks' bioactive compounds

Vegetables and fruits contain a variety of bioactive nutrients and non-nutrients that are associated with health promotion. Consumers currently demand foods with high contents of healthy compounds, as well as preserved natural taste and flavour, minimally processed without using artificial additives. Processing alternatives to be applied on plant-based foodstuffs to obtain beverages are mainly referred to as classical thermal treatments that although are effective treatments to ensure safety and extended shelf-life, also cause undesirable changes in the sensory profiles and phytochemical properties of beverages, thus affecting the overall quality and acceptance by consumers. As a result of these limitations, new non-thermal technologies have been developed for plant-based foods/beverages to enhance the overall quality of these products regarding microbiological safety, sensory traits, and content of bioactive nutrients and non-nutrients during the shelf-life of the product, thus allowing to obtain enhanced health-promoting beverages. Accordingly, the present article attempts to review critically the principal benefits and downsides of the main non-thermal processing alternatives (High hydrostatic pressure, pulsed electric fields, ultraviolet light, and ultrasound) to set up sound comparisons with conventional thermal treatments, providing a vision about their practical application that allows identifying the best choice for the sectoral industry in non-alcoholic fruit and vegetable-based beverages.

Progress in the Valorization of Fruit and Vegetable Wastes: Active Packaging, Biocomposites, By-Products, and Innovative Technologies Used for Bioactive Compound Extraction

According to the Food Wastage Footprint and Climate Change Report, about 15% of all fruits and 25% of all vegetables are wasted at the base of the food production chain. The significant losses and wastes in the fresh and processing industries is becoming a serious environmental issue, mainly due to the microbial degradation impacts. There has been a recent surge in research and innovation related to food, packaging, and pharmaceutical applications to address these problems. The underutilized wastes (seed, skin, rind, and pomace) potentially present good sources of valuable bioactive compounds, including functional nutrients, amylopectin, phytochemicals, vitamins, enzymes, dietary fibers, and oils. Fruit and vegetable wastes (FVW) are rich in nutrients and extra nutritional compounds that contribute to the development of animal feed, bioactive ingredients, and ethanol production. In the development of active packaging films, pectin and other biopolymers are commonly used. In addition, the most recent research studies dealing with FVW have enhanced the physical, mechanical, antioxidant, and antimicrobial properties of packaging and biocomposite systems. Innovative technologies that can be used for sensitive bioactive compound extraction and fortification will be crucial in valorizing FVW completely; thus, this article aims to report the progress made in terms of the valorization of FVW and to emphasize the applications of FVW in active packaging and biocomposites, their by-products, and the innovative technologies (both thermal and non-thermal) that can be used for bioactive compounds extraction.

Enhancement of Polyphenols Recovery from Rosa canina, Calendula officinalis and Castanea sativa Using Pulsed Electric Field

The current study evaluates the Pulsed Electric Field (PEF) technique for the extraction of polyphenols from the plants Rosa canina, Calendulaofficinalis and Castanea sativa. These plants are traditionally used both for the preparation of therapeutic decoctions and the aromatization of beverages (alcoholic or not). Pulses of 10 μs duration were used to apply electric field intensities ranging from 1.2 to 2.0 kV cm−1. The period of the phenomenon was set to 1 ms, with a total extraction time of 20 min. The total polyphenol content as well as the identified polyphenolic compounds of the extracts were determined for monitoring and evaluation. To estimate the PEF effect, control extracts were prepared using the same process as PEF extracts but without the application of electric field. For all the three plant materials studied, the PEF technique appeared to be successful in increasing polyphenols extraction. The application of a moderate to high electric field, up to 1.4 kV cm−1, resulted in increased total and individual polyphenols recovery, reaching 63.79% and 84%, respectively, in the case of Rosa canina fruits.

The Use of Iron-Enriched Yeast for the Production of Flatbread

The most common cause of iron deficiency is an improperly balanced diet, in which the body’s need for iron cannot be met by absorption of this element from food. Targeted iron supplementation and food fortification may be the main treatments for iron deficiency in the population. However, many iron-rich supplements and foods have low bioavailability of this element. In our study, we used yeast enriched with iron ions to produce flatbread. The yeast cells accumulated iron ions from the medium supplemented with Fe(NO₃)₃·9H₂O, additionally one of the cultures was treated with pulsed electric field in order to increase the accumulation. The potential bioavailability of iron from flatbread containing 385.8 ± 4.12 mg of iron in 100 g dry mass was 10.83 ± 0.94%. All the flatbreads had a moderate glycemic index. There were no significant differences in antioxidant activity against DPPH^• between flatbread with iron-enriched and non-iron-enriched yeast. Sensory evaluation showed that this product is acceptable to consumers since no metallic aftertaste was detected. Iron enriched flatbread can potentially be an alternative to dietary supplements in iron deficiency states.

Food Composition Databases: Does It Matter to Human Health?

Food provides humans with more than just energy and nutrients, addressing both vital needs and pleasure. Food habits are determined by a wide range of factors, from sensorial stimuli to beliefs and, once commanded by local and seasonal availability, are nowadays driven by marketing campaigns promoting unhealthy and non-sustainable foodstuffs. Top-down and bottom-up changes are transforming food systems, driven by policies on SDGs and by consumer's concerns about environmental and health impacts. Food quality, in terms of taste, safety, and nutritional value, is determined by its composition, described in food composition databases (FDBs). FDBs are then useful resources to agronomists, food and mechanical engineers, nutritionists, marketers, and others in their efforts to address at maximum human nutrient needs. In this work, we analyse some relevant food composition databases (viz., purpose, type of data, ease of access, regularity of updates), inspecting information on the health and environmental nexus, such as food origin, production mode as well as nutritional quality. The usefulness and limitations of food databases are discussed regarding what concerns sustainable diets, the food 'matrix effect', missing compounds, safe processing, and in guiding innovation in foods, as well as in shaping consumers' perceptions and food choices.

Pulsed Electric Field (PEF) Enhances Iron Uptake by the Yeast Saccharomyces cerevisiae

The aim of the study was to investigate the influence of a pulsed electric field (PEF) on the level of iron ion accumulation in Saccharomyces cerevisiae cells and to select PEF conditions optimal for the highest uptake of this element. Iron ions were accumulated most efficiently when their source was iron (III) nitrate. When the following conditions of PEF treatment were used: voltage 1500 V, pulse width 10 μs, treatment time 20 min, and a number of pulses 1200, accumulation of iron ions in the cells from a 20 h-culture reached a maximum value of 48.01 mg/g dry mass. Application of the optimal PEF conditions thus increased iron accumulation in cells by 157% as compared to the sample enriched with iron without PEF. The second derivative of the FTIR spectra of iron-loaded and -unloaded yeast cells allowed us to determine the functional groups which may be involved in metal ion binding. The exposure of cells to PEF treatment only slightly influenced the biomass and cell viability. However, iron-enriched yeast (both with or without PEF) showed lower fermentative activity than a control sample. Thus obtained yeast biomass containing a high amount of incorporated iron may serve as an alternative to pharmacological supplementation in the state of iron deficiency.

Physical and Chemical Methods for Reduction in Aflatoxin Content of Feed and Food

Aflatoxins (AFs) are among the most harmful fungal secondary metabolites imposing serious health risks on both household animals and humans. The more frequent occurrence of aflatoxins in the feed and food chain is clearly foreseeable as a consequence of the extreme weather conditions recorded most recently worldwide. Furthermore, production parameters, such as unadjusted variety use and improper cultural practices, can also increase the incidence of contamination. In current aflatoxin control measures, emphasis is put on prevention including a plethora of pre-harvest methods, introduced to control Aspergillus infestations and to avoid the deleterious effects of aflatoxins on public health. Nevertheless, the continuous evaluation and improvement of post-harvest methods to combat these hazardous secondary metabolites are also required. Already in-use and emerging physical methods, such as pulsed electric fields and other nonthermal treatments as well as interventions with chemical agents such as acids, enzymes, gases, and absorbents in animal husbandry have been demonstrated as effective in reducing mycotoxins in feed and food. Although most of them have no disadvantageous effect either on nutritional properties or food safety, further research is needed to ensure the expected efficacy. Nevertheless, we can envisage the rapid spread of these easy-to-use, cost-effective, and safe post-harvest tools during storage and food processing.

Innovative Seafood Preservation Technologies: Recent Developments

Fish and fishery products are among the food commodities of high commercial value, high-quality protein content, vitamins, minerals and unsaturated fatty acids, which are beneficial to health. However, seafood products are highly perishable and thus require proper processing to maintain their quality and safety. On the other hand, consumers, nowadays, demand fresh or fresh-like, minimally processed fishery products that do not alter their natural quality attributes. The present article reviews the results of studies published over the last 15 years in the literature on: (i) the main spoilage mechanisms of seafood including contamination with pathogens and (ii) innovative processing technologies applied for the preservation and shelf life extension of seafood products. These primarily include: high hydrostatic pressure, natural preservatives, ozonation, irradiation, pulse light technology and retort pouch processing.