Phytochemically Functionalized Cu and Ag Nanoparticles Embedded in MWCNTs for Enhanced Antimicrobial and Anticancer Properties

Harnessing the potential of bimetallic nanoparticles: Exploring a novel approach to address antimicrobial resistance

The growing global importance of antimicrobial resistance (AMR) in public health has prompted the creation of innovative approaches to combating the issue. In this study, the promising potential of bimetallic nanoparticles (BMNPs) was investigated as a novel weapon against AMR. This research begins by elaborating on the gravity of the AMR problem, outlining its scope in terms of the effects on healthcare systems, and stressing the urgent need for novel solutions. Because of their unusual features and wide range of potential uses, bimetallic nanoparticles (BMNPs), which are tiny particles consisting of two different metal elements, have attracted a lot of interest in numerous fields. This review article provides a comprehensive analysis of the composition, structural characteristics, and several synthesis processes employed in the production of BMNPs. Additionally, it delves into the unique properties and synergistic effects that set BMNPs apart from other materials. This review also focuses on the various antimicrobial activities shown by bimetallic nanoparticles, such as the rupturing of microbial cell membranes, the production of reactive oxygen species (ROS), and the regulation of biofilm formation. An extensive review of in vitro studies confirms the remarkable antibacterial activity of BMNPs against a variety of pathogens and sheds light on the dose-response relationship. The efficacy and safety of BMNPs in practical applications are assessed in this study. It also delves into the synergistic effects of BMNPs with traditional antimicrobial drugs and their ability to overcome multidrug resistance, providing mechanistic insight into these phenomena. Wound healing, infection prevention, and antimicrobial coatings on medical equipment are only some of the clinical applications of BMNPs that are examined, along with the difficulties and possible rewards of clinical translation. This review covers nanoparticle-based antibacterial regulation and emerging uses. The essay concludes with prospects for hybrid systems, site-specific targeting, and nanoparticle-mediated gene and drug delivery. In summary, bimetallic nanoparticles have surfaced as a potential solution, offering the public a more promising and healthier future.

Synthesis of CuO/polyaniline/multiwalled carbon nanotube composites using Macaranga indica leaves extract as hydrogen gas sensor

In this study, we describe the fabrication of hydrogen gas sensors in the form of nanocomposites containing metal oxides such as copper oxide (CuO), multiwalled carbon nanotubes (MWCNTs), and polyaniline (PANI) using a green synthesis method. We used Macaranga indica (M. indica) leaf extract as a reducing and stabilizing agent to prepare copper oxide nanoparticles (CuONPs). The sample was analyzed using various techniques to determine its physicochemical, morphological, and elemental composition. The XRD data showed that the sample is a CuO/PANI/MWCNT nanocomposite by the best match with the reported data. SEM images revealed a uniform distribution of MWCNTs and spherical CuO nanoparticles of 30-40 nm throughout the CNT network. EDX confirmed that the prepared sample is a pure and inline combination of Cu, O, C, and N. Due to the presence of bioactive elements and PANI, we observed 17% and 25% weight loss for CuO and CuO/PANI/MWCNTs. It was found that this combination of materials can detect H2 gas in concentrations ranging from 110 to 2 ppm at temperatures of 200 and 250 °C. As H2 concentration increased, sensitivity varied from 5% to 20%, but response and recovery times were about 290 and 500 s, respectively, for 40 ppm H2 gas. A logistic function fit to Ra/Rg versus H2 was performed using Y = A2 + (A1 - A2)/(1 + (x/x0)p). The energy bands among the CuO/PANI/MWCNT heterointerfaces were used to demonstrate enhanced H2 gas-sensing properties.

Terminalia arjuna, a Cardioprotective Herbal Medicine-Relevancy in the Modern Era of Pharmaceuticals and Green Nanomedicine-A Review

Herbal medicines were the main source of therapeutic agents in the ancestral era. Terminalia arjuna (TA) is one such medicinal plant widely known for its several medicinal properties, especially its cardiovascular properties. They have several phytochemicals, such as flavonoids, polyphenols, triterpenoids, tannins, glycosides, and several minerals, proteins, and others that are responsible for the above-mentioned medicinal properties. In this review, we have first elaborated on the various processes and their parameters for the efficient extraction of relevant phytochemicals from TA extracts. Secondly, the mechanisms behind the various medicinal properties of TA extracts are explained. We have also highlighted the role of TA extracts on the green synthesis of metallic nanoparticles, especially silver and gold nanoparticles, with an elucidation on the mechanisms behind the synthesis of nanoparticles. Finally, TA extracts-based polymeric formulations are discussed with limitations and future perspectives. We believe that this review could help researchers understand the importance of a well-known cardioprotective medicinal plant, TA, and its biomedical properties, as well as their role in green nanotechnology and various formulations explored for encapsulating them. This review will help researchers design better and greener nanomedicines as well as better formulations to improve the stability and bioavailability of TA extracts.

Inactivation of fungal spores from clinical environment by silver bio-nanoparticles; optimization, artificial neural network model and mechanism

The present study aimed to assess the efficiency of silver bio-nanoparticles (Ag-NPs) in inactivating of the Aspergillus fumigatus, A. parasiticus and A. flavus var. columnaris and A. aculeatus spores. The AgNPs were synthesized in secondary metabolic products of Penicillium pedernalens 604 EAN. The inactivation process was optimized by response surface methodology (RSM) as a function of Ag NPs volume (1-10 μL/mL); time (10-120 min); pH (5-8); initial fungal concentrations (log₁₀) (3-6). The artificial neural network (ANN) model was used to understand the behavior of spores for the factors affecting inactivation process. The best conditions to achieved SAL 10^-6 of the fungal spores were recorded with 3.46 μl/mL of AgNPs, after 120 min at pH 5 and with 6 log of initial fungal spore concentrations, at which 5.99 vs. 6.09 (SAL 10^-6) log reduction was recorded in actual and predicted results respectively with coefficient of 87.00%. The ANN revealed that the timehas major contribution in the inactivation process compare to Ag NPs volume. The fungal spores were totally inactivated (SAL 10^-6, 6 log reduction with 99.9999%) after 110 min of the inactivation process, 10 min more was required to insure the irreversible inactivation of the fungal spores. The absence of protease and cellulase enzymes production confirm the total inactivation of the fungal spores. FESEM analysis revealed that the AgNPs which penetrated the fungal spores leading to damage and deform the fungal spore morphology. The AFM analysis confirmed the total spore surface damage. The bands in the range of the Raman spectroscopy from 1300 to 1600 cm^-1 in the inactivated spores indicate the presence of CH_3, CH₂ and the deformation of lipids released outside the spore cytoplasm. These finding indicate that the AgNPs has high potential as a green alternative inactivation process for the airborne fungal spores.

Photocatalytic nanoparticles - From membrane interactions to antimicrobial and antiviral effects

As a result of increasing resistance among pathogens against antibiotics and anti-viral therapeutics, nanomaterials are attracting current interest as antimicrobial agents. Such materials offer triggered functionalities to combat challenging infections, based on either direct membrane action, effects of released ions, thermal shock induced by either light or magnetic fields, or oxidative photocatalysis. In the present overview, we focus on photocatalytic antimicrobial effects, in which light exposure triggers generation of reactive oxygen species. These, in turn, cause oxidative damage to key components in bacteria and viruses, including lipid membranes, lipopolysaccharides, proteins, and DNA/RNA. While an increasing body of studies demonstrate that potent antimicrobial effects can be achieved by photocatalytic nanomaterials, understanding of the mechanistic foundation underlying such effects is still in its infancy. Addressing this, we here provide an overview of the current understanding of the interaction of photocatalytic nanomaterials with pathogen membranes and membrane components, and how this translates into antibacterial and antiviral effects.

A Review on Plant-Mediated Synthesis of Bimetallic Nanoparticles, Characterisation and Their Biological Applications

The study of bimetallic nanoparticles (BNPs) has constantly been expanding, especially in the last decade. The biosynthesis of BNPs mediated by natural extracts is simple, low-cost, and safe for the environment. Plant extracts contain phenolic compounds that act as reducing agents (flavonoids, terpenoids, tannins, and alkaloids) and stabilising ligands moieties (carbonyl, carboxyl, and amine groups), useful in the green synthesis of nanoparticles (NPs), and are free of toxic by-products. Noble bimetallic NPs (containing silver, gold, platinum, and palladium) have potential for biomedical applications due to their safety, stability in the biological environment, and low toxicity. They substantially impact human health (applications in medicine and pharmacy) due to the proven biological effects (catalytic, antioxidant, antibacterial, antidiabetic, antitumor, hepatoprotective, and regenerative activity). To the best of our knowledge, there are no review papers in the literature on the synthesis and characterisation of plant-mediated BNPs and their pharmacological potential. Thus, an effort has been made to provide a clear perspective on the synthesis of BNPs and the antioxidant, antibacterial, anticancer, antidiabetic, and size/shape-dependent applications of BNPs. Furthermore, we discussed the factors that influence BNPs biosyntheses such as pH, temperature, time, metal ion concentration, and plant extract.

Anticancer Potential of Natural Bark Products-A Review

Cell biology, plant-based extracts, structural chemistry, and laboratory in vitro or in vivo experiments are the principal aspects or interfaces that can contribute to discovering new possibilities in cancer therapy and to developing improved chemotherapeutics. Forestry residues can be used for their wealthy resource in polyphenols and other phytoconstituents known for anticancer properties. This review is designed to bring together information on the in vitro or in vivo anticancer potential of woody vascular plants especially the bark extracts (BE) and biosynthesized metallic nanoparticles (BMN) using bark extracts. Type of extracts, main phytoconstituents found in extracts responsible for the anticancer activity, and targeted cancerous cell lines were followed. The literature data were collected via Clarivate Analytics, Science Direct, PubMed, and Google Academic (2011-2021). The search terms were: bark extracts, metallic nanoparticles, silver nanoparticles, gold nanoparticles, anticancer, cytotoxic activity, antiproliferative effect, and antimetastatic potential in vitro and in vivo. All of the search terms listed above were used in different combinations. The literature data highlight the efficaciousness of the BE and BMN as anticancer agents in in vitro experiments and showed the mechanism of action and their advantage of nontoxicity on normal cells. In vitro testing has shown promising results of the BE and BMN effect on different cancer cell lines. In vivo testing is lacking and more data is necessary for drug development on animal models.

A potential role of green engineered TiO2 nanocatalyst towards enhanced photocatalytic and biomedical applications

This study demonstrates a simple protocol for phytofabrication of titanium dioxide nanoparticles (TiO₂NPs) wrapped with bioactive molecules from Ludwigia octovalvis leaf extract and their characterization by UV-visible absorption spectroscopy, Fourier transform spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray photoelectron spectrum (XPS), and diffuse reflectance spectrum (DRS). The bandgap energy of pure green engineered TiO₂ nanoparticles was determined by DRS analysis. The XPS analysis confirmed the purity of the TiO₂ nanoparticles. Results show that the synthesized TiO₂NPs were spherical in shape with the size ranged from 36 to 81 nm. The green engineered titanium oxide nanocatalyst exhibited enhanced rate of photocatalytic degradation of important textile toxic dyes namely crystal violet (93.1%), followed by methylene blue (90.6%), methyl orange (76.7%), and alizarin red (72.4%) after 6-h exposure under sunlight irradiation. Besides, this study determines the antimicrobial efficiency of TiO₂NPs (25 μl and 50 μl), leaf extract (25 μl), and antibiotic (25 μl) against clinically isolated human pathogenic bacterial strains namely Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa, Proteus vulgaris, Staphylococcus epidermidis, and Escherichia coli. Results show that maximum antibacterial activity with nanotitania treatment noticed was 21.6 and 18.3-mm inhibition in case of S. epidermis and P. aeruginosa, respectively. Enhanced rate of antibiofilm activity towards S. aureus and K. pneumoniae was also observed with TiO₂NPs exposure. The biomolecule loaded TiO₂NPs exhibited the fastest bacterial deactivation dynamics towards gram-negative bacteria (E. coli), with a complete bacterial inactivation within 105-min exposure. Interestingly, anticancer activity result indicates that percentage of human cervical carcinoma cell (HeLa) viability was negatively correlated with TiO₂NPs doses used. The AO/EtBr fluorescent staining result exhibited the occurrence of more apoptosis (dead cells) of HeLa cells due to the exposure of TiO₂NPs. Altogether, the present study clearly showed that biomolecules wrapped nanotitania could be used as effective and promising compound for enhanced photocatalytic and biomedical applications in the future.

Antimicrobial biodegradable film based on corn starch/Satureja khuzestanicaessential oil/Ag-TiO2nanocomposites

Biosynthesis of nanoparticles (NPs) using plant extract is an eco-friendly method, in which natural materials are used and is a simple, non-toxic, and environmentally friendly green synthesis. In this study, corn starch (CS) film containingSatureja khuzestanicaessential oil (SEO) and Ag-TiO₂nanocomposites (size: nearly 30-60 nm) were prepared and its antimicrobial, morphological, physical, and mechanical characteristics were investigated. Ag-TiO₂nanocomposites with different molar percentages were synthesized byS. khuzestanicaextract and based on the best antibacterial results against Gram-negative bacteria (Escherichia coliATCC 25922 andSalmonella typhimuriumATCC 14028) and Gram-positive bacteria (Staphylococcus aureusATCC 25923), were chosen to prepare the films. Four types of biodegradable films were provided: simple CS film, the film incorporated with SEO (essence film), the film incorporated with Ag-TiO₂nanocomposites (nanofilm), and nano/essence film. The scanning electron microscopy (SEM) was employed for investigating the morphology of the films. The combined energy-dispersive x-ray spectroscopy with SEM was applied to analyze the near-surface elements. Physical characteristics of the films containing water vapor permeability (%) and their moisture content, mechanical tests, and antibacterial properties were examined. Antimicrobial evaluation of the films revealed a 3-4 log and 6-7 log (CFU ml^-1) reduction inS. aureusandE. colispecies respectively, compared to the control group. The bio-polymer film incorporated with extracted essential oil ofS. khuzestanicaand Ag-TiO₂nanocomposites are effective to package foods and can delay chemical, physical, and microbial spoilage.

Antimicrobial and anti-adhesive properties of carbon nanotube-based surfaces for medical applications: a systematic review

Although high-performance carbon materials are widely used in surface engineering, with emphasis on carbon nanotubes (CNTs), the application of CNT nanocomposites on medical surfaces is poorly documented. In this study, we aimed to evaluate the antimicrobial and anti-adhesive properties of CNT-based surfaces. For this purpose, a PRISMA-oriented systematic review was conducted based on predefined criteria and 59 studies were selected for the qualitative analysis. Results from the analyzed studies suggest that surfaces containing modified CNTs, and specially CNTs conjugated with different polymers, exhibited strong antimicrobial and anti-adhesive activities. These composites seem to preserve the CNT toxicity to microorganisms and promote CNT-cell interactions, as well as to protect them from nonspecific protein adsorption. However, CNTs cannot yet compete with the conventional strategies to fight biofilms as their toxicity profile on the human body has not been thoroughly addressed. This review can be helpful for the development of new engineered medical surfaces.

Phytochemical delivery through nanocarriers: a review

In recent times, phytochemicals encapsulated or conjugated with nanocarriers for delivery to the specific sites have gained considerable research interest. Phytochemicals are mostly plant secondary metabolites which reported to be beneficial for human health and in disease theraphy. However, these compound are large size and polar nature of these compounds, make it difficult to cross the blood-brain barrier (BBB), endothelial lining of blood vessels, gastrointestinal tract and mucosa. Moreover, they are enzymatically degraded in the gastrointestinal tract. Therefore, encapsulation or conjugation of these compounds with nanocrriers could be an alternate way to enhance their bioefficacy by influencing their gastrointestinal stability, rate of absorption and dispersion. This review presents an overview of nanocarriers alternatives which improves therapeutic value and avoid toxicity, by releasing bioactive compounds specifically at target tissues with enhanced stability and bioavailability. Future investigations may emphasize on deciphering the structural changes in nanocarriers during digestion and absorption, the difference between in-vitro and in-vivo digestion simulations, and impact of nanocarriers on the metabolism of phytochemicals.

Novel Biosynthesis of Copper Nanoparticles Using Zingiber and Allium sp. with Synergic Effect of Doxycycline for Anticancer and Bactericidal Activity

Copper nanoparticles (CuNPs), due to their cost-effective synthesis, interesting properties, and a wide range of applications in conductive inks, cooling fluids, biomedical field, and catalysis, have attracted the attention of scientific community in recent years. The aim of the present study was to develop and characterize antibacterial and anticancer CuNPs synthesized via chemical and biological methods, and further synthesize CuNPs conjugated with doxycycline to study their synergic effect. During the chemical synthesis, ascorbic acid was used as a stabilizing agent, while Zingiber officinale and Allium sativum-derived extracts were used during the biological methods for synthesis of CuNPs. Characterization of CuNPs was performed by transmission electron microscopy (TEM), UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray crystallography (XRD). Antimicrobial evaluation of the nanomaterials against Pseudomonas aeruginosa and Escherichia coli was performed by using disk diffusion method, while anticancer behavior against HeLa and HepG2 cell lines was studied by MTT assay. TEM revealed spherical-shaped nanoparticles with mean size of 22.70 ± 5.67, 35.01 ± 5.84, and 19.02 ± 2.41 nm for CuNPs, Gin-CuNPs, and Gar-CuNPs, respectively, and surface plasmon resonance peaks were obtained at 570 nm, 575 nm, and 610 nm for CuNPs, Gar-CuNPs, and Gin-CuNPs, respectively. The results of FTIR confirmed the consumption of biomolecules from the plant extracts for the synthesis of CuNPs. XRD analysis also confirmed synthesis of CuNPs. Doxycycline-conjugated NPs exhibited more antibacterial effects than doxycycline or CuNPs alone. Copper nanoparticles prepared by biological synthesis are cost-effective and eco-friendly as compared to their chemical counterparts. The chemically synthesized nanoparticles displayed more significant antimicrobial activity when capped with doxycycline than Z. officinale and A. sativum-mediated CuNPs; however, green-synthesized nanoparticles showed greater anticancer activity than their chemical counterparts.

Novel Biogenic Silver Nanoparticle-Induced Reactive Oxygen Species Inhibit the Biofilm Formation and Virulence Activities of Methicillin-Resistant Staphylococcus aureus (MRSA) Strain

Emerging antibiotic-resistant bacteria result in increased mortality and have negative economic impacts. It is necessary to discover new strategies to create alternative antibacterial agents that suppress the bacterial resistance mechanism and limit the spread of serious infectious bacterial diseases. Silver nanoparticles may represent a new medicinal agents as alternative antibiotics affect different bacterial mechanisms such as virulence and resistance. In addition to that of silver nitrate (AgNO₃) and ampicillin, for the first time, the inhibitory effect of silver nanoparticles synthesized using Desertifilum sp. (D-SNPs) was evaluated against five pathogenic bacteria using the agar well diffusion method. Also, the influence of D-SNPs and AgNO₃ on bacterial antioxidant and metabolic activities was studied. The antibacterial activity of D-SNPs and AgNO₃ against methicillin-resistant Staphylococcus aureus (MRSA) strains was studied at the morphological and molecular level. D-SNPs and AgNO₃ have the ability to inhibit the growth of the five bacterial strains and resulted in an imbalance in the CAT, GSH, GPx and ATPase levels. MRSA treated with D-SNPs and AgNO₃ showed different morphological changes such as apoptotic bodies formation and cell wall damage. Moreover, both caused genotoxicity and denaturation of MRSA cellular proteins. Additionally, TEM micrographs showed the distribution of SNPs synthesized by MRSA. This result shows the ability of MRSA to reduce silver nitrate into silver nanoparticles. These data indicate that D-SNPs may be a significant alternative antibacterial agent against different bacteria, especially MDR bacteria, by targeting the virulence mechanism and biofilm formation, leading to bacterial death.

Cytotoxicity properties of functionalised carbon nanotubes on pathogenic bacteria

Nanobiotechnology is a promising field concerned with the using of engineered nanomaterials, which leads to the improvement of new human remedial against pathogenic bacteria modalities. In this work, silver nanoparticles (AgNPs) were prepared by an easy, cheap and low-cost electro-chemical method. The AgNPs were then loaded successfully on to multi-walled carbon nanotubes (MWCNTs) using a modified chemical reaction process. The AgNPs on the MWCNTs were well spread and evenly distributed on the surfaces of the long nanotubes with well-graphitised walls as examined by high-resolution transmission electron microscopy. X-ray diffraction and transmission electron microscopy were used for sample characterisation. Good dispersion of AgNPs was obtained on the surface of MWCNTs, resulting in an efficient reactivity of the carbon nanotubes surfaces. Finally, the antibacterial activity of AgNPs/MWCNTs hybrid was evaluated against two pathogenic bacteria Pseudomonas aeruginosa and Staphylococcus aureus exhibited excellent activity.

A Review of Bark-Extract-Mediated Green Synthesis of Metallic Nanoparticles and Their Applications

Nanoparticles are intensely studied because of their importance in diverse fields of biotechnology, especially in medicine. This paper highlights that waste bark can be a cheap source of biocompounds, with high recovery and functionalization potential in nanoparticle synthesis. Due to their biocompatibility and activity as antioxidant, antimicrobial, and anticancer agents, the green synthesis of metallic nanoparticles is of great importance. This review aims to bring together the diversity of synthesized metallic nanoparticles mediated by bark extracts obtained from different woody vascular plants, the phytoconstituents responsible for the reduction of metal salts, and the activity of metallic nanoparticles as diverse agents in combating the microbial, oxidant, and cancer activity. The literature data highlight the fact that metallic nanoparticles obtained from natural compounds are proven reducing agents with multiple activities. Thus, the activity of natural components in environmental protection and human health is confirmed.

Improved Configuration and LSPR Response of Platinum Nanoparticles via Enhanced Solid State Dewetting of In-Pt Bilayers

Noble metallic nanoparticles (NPs) can exhibit valuable properties such as localized surface plasmon resonance (LSPR) and large surface to volume ratio, which can find various optoelectronic and catalytic applications. In this work, the improved configuration and uniformity of platinum (Pt) NPs are demonstrated by using a sacrificial indium (In) layer via the enhanced solid state dewetting of In-Pt bilayers on sapphire (0001). In a sharp contrast to the conventional dewetting of intrinsic Pt film, the introduction of In component can significantly enhance the global dewetting process and thus can result in the fabrication of well-defined Pt NPs with the improved uniformity. This can be due to the fact that In possess high diffusivity, low surface energy and low sublimation temperature. Upon annealing, the intermixing of In and Pt atoms can occur at the interface due to the inter-diffusion, which forms In-Pt alloy system. As a result, the overall diffusivity and dewetting degree of system can be significantly improved and this can produce more isolated, uniform and semispherical Pt NPs at much lower temperatures as compared to the pure Pt film dewetting. Conveniently, the In atoms preferentially can be removed from the NP matrix by the sublimation even at relatively low temperatures. These Pt NPs exhibit dynamic LSPR band in the UV-visible wavelength based on the excitation of dipolar, quadrupolar and higher order resonance modes. Specifically, the LSPR wavelength can be tuned between ~480 and 580 nm by the fabrication of small to large size Pt NPs with the distinct configuration and interparticle spacing. Furthermore, at a constant Pt thickness, the size, spacing and density of Pt NPs can be readily tuned by the control of In layer thickness. The introduction of sacrificial In component can enable an additional flexibility for the control of surface morphologies of metallic NPs with the low diffusivity materials.

Modification of dewetting characteristics for the improved morphology and optical properties of platinum nanostructures using a sacrificial indium layer

Metal nanoparticles (NPs) fabricated by means of the solid state dewetting (SSD) approach are applicable in many optoelectronic, biomedical and catalytical applications. However, the fabrication of metallic NPs with the low diffusivity elements such as platinum (Pt) has been challenging for the well-defined configuration and uniformity due to the low diffusivity of Pt atoms and thus the optical properties suffer. In this paper, the evolution of well-defined configuration and improved uniformity of Pt NPs are demonstrated by the altered solid state dewetting (ASSD) approach using a sacrificial indium (In) layer. Upon annealing, the high diffusivity In atoms can lead to the formation of In-Pt alloy due to the inter-mixing at the interface and the dewetting process advances along with the enhanced diffusion of In-Pt alloy atoms. Eventually, well-defined Pt NPs are formed by means of complete desorption of In atoms by sublimation. By the control of In and Pt ratio in the bilayers with the fixed total thickness such as In4.5 nm/Pt1.5 nm, In3 nm/Pt3 nm, In1.5 nm/Pt4.5 nm, the isolated dome shaped Pt NPs of various size are demonstrated, which reflects the significant impact of In component in the dewetting process. The optical characterization of Pt NPs exhibits the formation of quadrupolar resonance and strong dipolar resonance bands in the UV and VIS regions respectively, which are tunable based on the morphology of Pt NPs. In specific, the dipolar resonance peaks demonstrate a red shifting behavior with the increment of size of Pt NPs and gradually become narrower along with the improvement of uniformity of Pt NPs.

Boosting the Efficiency of Photoelectrolysis by the Addition of Non-Noble Plasmonic Metals: Al & Cu

Solar water splitting by semiconductor based photoanodes and photocathodes is one of the most promising strategies to convert solar energy to chemical energy to meet the high demand for energy consumption in modern society. However, the state-of-the-art efficiency is too low to fulfill the demand. To overcome this challenge and thus enable the industrial realization of a solar water splitting device, different approaches have been taken to enhance the overall device efficiency, one of which is the incorporation of plasmonic nanostructures. Photoanodes and photocathodes coupled to the optimized plasmonic nanostructures, matching the absorption wavelength of the semiconductors, can exhibit a significantly increased efficiency. So far, gold and silver have been extensively explored to plasmonically enhance water splitting efficiency, with disadvantages of high cost and low enhancement. Instead, non-noble plasmonic metals such as aluminum and copper, are earth-abundant and low cost. In this article, we review their potentials in photoelectrolysis, towards scalable applications.

Antibacterial biocompatible arginine functionalized mono-layer graphene: No more risk of silver toxicity

Antibacterial ability is vital in biological approaches as well as functional biomaterials. Besides, cytocompatibility aspect of biologic media, tissue and organs is always concern for appropriate synthesis. From the past, metallic/oxide phases of silver (Ag) material in various macro, micro or nano configurations have been widely used for antibacterial targets. While, background of Ag toxicity within particle, film and composites is posing gradual ion release affected by molecular bounding. Recent researches conducted to control, optimize and neutralize Ag limitations finding the benefits of ideal (∼ 100%) mediation against both Gram-negative and Gram-positive bacteria. Whereas, non-degradable releases history is still a challenge and its longer accumulation may cause to disrupt biostructures and disease risk. Thus, facile development of large-area organic materials with switchable bacteria toxicity and normal cell compatibility function is interesting for concerned approaches. Here, smart positively-charged stable arginine amino acid incorporated mono layer graphene (Arg-EMGr) nanobiocomposite introduced as useful antibacterial and safe bactericidal agent competitive with Ag direct. The immunity characteristic versus Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) comparably assessed with graphene oxide (GO) and different concentrations GO-AgNPs morphology. As cell viability matter, 1,3,5,7-days vitro culture assay shown attachment proliferation and cytotoxicity due to short interaction.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Role of poly(ethylene oxide) in copper-containing composite used for intrauterine contraceptive devices

Copper-containing composite is a cupric ions release system to prepare a novel copper intrauterine devices (Cu-IUDs), its biocompatibility and weight of the prepared composite Cu-IUDs are directly relevant to its such side-effects as pain and bleeding. To improve its biocompatibility and reduce its weight of such a composite Cu-IUDs, a copper-containing composite based on polymer alloy of poly(ethylene oxide) (PEO) and low-density polyethylene (LDPE) is developed. Here the role of its PEO in this novel cupric ions release system is reported. The results show that its cupric ions release rate can be adjusted easily by only changing its PEO content, and it increases remarkably with the increase of its PEO content. Our study also show that this influence is caused by the improvement of its hydrophilicity and the formation of its porous structure owing to the introduction of PEO. The improvement of its hydrophilicity make it easier for the surrounding aqueous solution to infiltrate into the composite, and the formation of its porous structure provide more routes for entry of the aqueous solution and diffusion of the released cupric ions. All these results indicate that the Cu/PEO/LDPE composite is a potential material that can be used to prepare such cupric ions release micro-devices as Cu-IUDs with slighter side-effects through its smaller weight.

Membrane interactions and antimicrobial effects of inorganic nanoparticles

Interactions between nanoparticles and biological membranes are attracting increasing attention in current nanomedicine, and play a key role both for nanotoxicology and for utilizing nanomaterials in diagnostics, drug delivery, functional biomaterials, as well as combinations of these, e.g., in theranostics. In addition, there is considerable current interest in the use of nanomaterials as antimicrobial agents, motivated by increasing resistance development against conventional antibiotics. Here, various nanomaterials offer opportunities for triggered functionalites to combat challenging infections. Although the performance in these diverse applications is governed by a complex interplay between the nanomaterial, the properties of included drugs (if any), and the biological system, nanoparticle-membrane interactions constitute a key initial step and play a key role for the subsequent biological response. In the present overview, the current understanding of inorganic nanomaterials as antimicrobial agents is outlined, with special focus on the interplay between antimicrobial effects and membrane interactions, and how membrane interactions and antimicrobial effects of such materials depend on nanoparticle properties, membrane composition, and external (e.g., light and magnetic) fields.

Various Silver Nanostructures on Sapphire Using Plasmon Self-Assembly and Dewetting of Thin Films

Silver (Ag) nanostructures demonstrate outstanding optical, electrical, magnetic, and catalytic properties and are utilized in photonic, energy, sensors, and biomedical devices. The target application and the performance can be inherently tuned by control of configuration, shape, and size of Ag nanostructures. In this work, we demonstrate the systematical fabrication of various configurations of Ag nanostructures on sapphire (0001) by controlling the Ag deposition thickness at different annealing environments in a plasma ion coater. In particular, the evolution of Ag particles (between 2 and 20 nm), irregular nanoclusters (between 30 and 60 nm), and nanocluster networks (between 80 and 200 nm) are found be depended on the thickness of Ag thin film. The results were systematically analyzed and explained based on the solid-state dewetting, surface diffusion, Volmer-Weber growth model, coalescence, and surface energy minimization mechanism. The growth behavior of Ag nanostructures is remarkably differentiated at higher annealing temperature (750 °C) due to the sublimation and temperature-dependent characteristic of dewetting process. In addition, Raman and reflectance spectra analyses reveal that optical properties of Ag nanostructures depend on their morphology.

Polymer Film Supported Bimetallic Au-Ag Catalysts for Electrocatalytic Oxidation of Ammonia Borane in Alkaline Media

ABSTRACT

Ammonia borane is widely used in most areas including fuel cell applications. The present paper describes electrochemical behavior of ammonia borane in alkaline media on the poly(p-aminophenol) film modified with Au and Ag bimetallic nanoparticles. The glassy carbon electrode was firstly covered with polymeric film electrochemically and then, Au, Ag, and Au-Ag nanoparticles were deposited on the polymeric film, respectively. The surface morphology and chemical composition of these electrodes were examined by scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. It was found that alloyed Au-Ag bimetallic nanoparticles are formed. Electrochemical measurements indicate that the developed electrode modified by Au-Ag bimetallic nanoparticles exhibit the highest electrocatalytic activity for ammonia borane oxidation in alkaline media. The rotating disk electrode voltammetry demonstrates that the developed electrode can catalyze almost six-electron oxidation pathway of ammonia borane. Our results may be attractive for anode materials of ammonia borane fuel cells under alkaline conditions.

GRAPHICAL ABSTRACT

Countering drug resistance, infectious diseases, and sepsis using metal and metal oxides nanoparticles: Current status

One fourth of the global mortalities is still caused by microbial infections largely due to the development of resistance against conventional antibiotics among pathogens, the resurgence of old infectious diseases and the emergence of hundreds of new infectious diseases. The lack of funds and resources for the discovery of new antibiotics necessitates the search for economic and effective alternative antimicrobial agents. Metal and metal oxide nanoparticles including silver and zinc oxide exhibit remarkable antimicrobial activities against pathogens and hence are one of the most propitious alternative antimicrobial agents. These engineered nanomaterials are approved by regulatory agencies such as USFDA and Korea's FITI, for use as antimicrobial agents, supplementary antimicrobials, food packaging, skin care products, oral hygiene, and for fortifying devices prone to microbial infections. Nevertheless, detailed studies, on molecular and biochemical mechanisms underlying their antimicrobial activity are missing. To take the full advantage of this emerging technology selective antimicrobial activity of these nanoparticles against pathogens should be studied. Optimization of these nanomaterials through functionalization to increase their efficacy and biocompatibility is also required. Urgent in vivo studies on the toxicity of nanomaterials at realistic doses are also needed before their clinical translation.