Rationalization in meat cutting - consequences on physical workload

Machine learning models for minimizing aggravation in work-related musculoskeletal disorders among slaughterhouse workers

BackgroundWork-related musculoskeletal disorders (WMSDs) are common in Brazilian slaughterhouses. The repetitive and strenuous nature of meat processing, especially in slaughterhouses, makes employees highly susceptible to developing WMSDs. Prolonged standing, repetitive motions, and forceful actions such as lifting and cutting are common contributing factors.ObjectiveThis study aimed to develop models to predict the risk of aggravating WMSDs in slaughterhouse workers using the data mining concept.MethodsData were retrieved from an open-source governmental database, and descriptive statistics were used to evaluate them. The data set involved organizational aspects, and demographic, physical, and health issues were attributes. A descriptive analysis was applied, and the data mining method was used to process data with the Random Forest algorithm to classify the aggravation of WMSDs'.ResultsThree tree-ensemble predictive models were found (accuracy = 95.3%, κappa = 0.93) and described using the "If-Then" rules. The first tree had as the root attribute the change of function due to a health condition (high blood pressure or diabetes), followed by medical leave, working time, change of working place, and age, and the second had the worker's age as the root attribute, followed by working time, sex, and age. The third tree's root attribute was musculoskeletal pain symptoms, followed by working hours, age, and working time. Workers who do not change their roles and are on medical leave for over 1642.5 days present a high risk of worsening symptoms. Working time over 1980 days leads to a high risk of aggravating WMSDs. Females older than 24.5 years and staying more than 1620 days in the same function also presented a high risk of aggravating the WMSDs.ConclusionsThe machine learning models might help prevent WMSD risk aggravation by sorting the available data set and identifying patterns and relationships.

Reliability and Accuracy of Standard Reference Procedures for Measurements of Trunk and Arm Postures in Ergonomics

Adequate reference procedures for obtaining the reference zero-angle position are important for precise and accurate posture measurements, but few studies have systematically investigated these. A limited number of previous studies suggest differences in accuracy between procedures, with some causing an underestimation of the true arm elevation angle when sensors are taped to the skin. The reliability of commonly used reference procedures for the measurement of the trunk posture is also not well explored, and alternative procedures may improve precision. Based on this identified gap, this study evaluated the test-retest reliability of the N-position (I-pose), i.e., the standard procedure for recording trunk postures, and compared it with two new alternative procedures. Additionally, the accuracy of the N-position for measuring arm elevation angles was compared with one alternative procedure. A total of 40 participants (22 women and 18 men) aged 26-70 years performed the reference procedures in a laboratory setting. Postures were recorded using a smart workwear system equipped with two inertial measurement units (IMUs) embedded in pockets within the workwear. For the trunk posture, the N-position showed a slight lack of test-retest reliability, while one of the alternative procedures demonstrated better test-retest reliability. For the arm posture, the N-position, which does not include lateral trunk inclination, resulted in a substantial underestimation of the arm elevation angle of approximately 15°, which is a novel finding. In contrast, the posture involving trunk inclination closely matched the targeted reference, with a difference of less than 2°. This study underscores the importance of selecting appropriate reference procedures to ensure precise and accurate posture measurements.

Effect of Knife Use and Overlapping Gloves on Finger Temperature of Poultry Slaughterhouse Workers

Brazilian poultry slaughterhouses employ many workers, consequently exposing them to various ergonomic risks. This study aimed to analyze the effects of knife use and overlapping gloves on the finger temperatures of poultry slaughterhouse workers. Employees (n = 571) from seven Brazilian poultry slaughterhouses participated in this cross-sectional study. A Flir® T450SC infrared camera was used to record thermographic images of the workers' hands. The workers were interviewed about work organization, cold thermal sensations, and the perception of upper-limb musculoskeletal discomfort. Dependent and independent sample t-tests and binary logistic regression models were applied. The results proved that the workers wore up to five overlapping gloves and had at least one finger with temperatures of ≤15 °C (46.6%) or ≤24 °C (98.1%). Workers that used a knife and wore a chainmail (CM) glove on their non-dominant hand had average finger temperatures significantly colder on the palmar surface than the anti-cut (AC) glove group (p = 0.029). The chance of one worker who wore a CM glove to have finger temperatures of ≤15 °C was 2.26 times greater than a worker who wore an AC glove. Those who wore an AC glove and those wearing a CM glove presented average overall finger temperatures significantly lower on the non-dominant hand (products) than the dominant hand (knife) (p < 0.001).

Biomechanical requirements of meat cutting tasks: A pilot study quantifying tasks sustainability and assistance required at the wrist

The meat processing industry is particularly affected by distal upper limb musculoskeletal disorders. This pilot study aims at proposing a methodology able to quantify biomechanical requirements of meat cutting tasks at butchers' dominant wrist and, when necessary, at estimating the assistance needed to reach sustainability. Six professional butchers repeatedly cut pieces of pork. Joint angles were recorded using a motion capture system, cutting forces using an instrumented knife. Sustainability was computed by the maximal acceptable effort method. Assistance requirements were computed for isolated stressful exertions and for overall work cycle sustainability. Five butchers exceeded the sustainability threshold for wrist flexion. Ulnar or radial deviation torques were excessive for 2 and 3 of them, respectively. Extension torques were sustainable. The peak assistive torque for isolated exertions was at most 1.1Nm, 1.6Nm and 1.1Nm, and the percentage of assistance for overall sustainability was at most 60%, 56% and 56% for wrist flexion, ulnar and radial deviation, respectively.

Assessing the efficacy of a job rotation for improving occupational physical and psychosocial work environment, musculoskeletal health, social equality, production quality and resilience at a commercial laundromat: protocol for a longitudinal case study

INTRODUCTION

Job rotation is a work organisation strategy used to reduce work-related exposures and musculoskeletal complaints, yet evidence for the efficacy of the approach is weak. Mismatch between job rotation and company needs, lack of full implementation, lack of exposure variation in included tasks and failure to assess variation may underlie inconclusive research findings to date. The study aims to develop a job rotation with company stakeholders, perform a process evaluation of the implementation, and determine the extent to which the intervention improves the physical and psychosocial work environment, indicators of health, gender and social equality among workers and production quality and resilience.

METHODS AND ANALYSIS

Approximately 60 production workers at a Swedish commercial laundromat will be recruited. Physical and psychosocial work environment conditions, health, productivity and gender and social equality will be assessed pre and post intervention, using surveys, accelerometers, heart rate, electromyography and focus groups. A task-based exposure matrix will be constructed, and exposure variation estimated at the level of the individual worker pre and post intervention. An implementation process evaluation will be conducted. Job rotation efficacy will be assessed in terms of improvement in work environment conditions, health, gender and social inequality, and production quality and resilience. This study will provide novel information on the effects of the job rotation on physical and psychosocial work environment conditions, production quality and rate, health and gender and social inequality among blue-collar workers in a highly multicultural workplace.

ETHICS AND DISSEMINATION

The study received approval from the Swedish Ethical Review Authority (reference number 2019-00228). The results of the project will be shared directly with the employees, managers and union representatives from the participating company, other relevant labour market stakeholders and with researchers at national and international conferences and via scientific publication.

TRIAL REGISTRATION NUMBER

The study is preregistered with the Open Science Framework (https://osf.io/zmdc8/).

Gyroscope vector magnitude: A proposed method for measuring angular velocities

High movement velocities are among the primary risk factors for work-related musculoskeletal disorders (MSDs). Ergonomists have commonly used two methods to calculate angular movement velocities of the upper arms using inertial measurement units (accelerometers and gyroscopes). Generalized velocity is the speed of movement traveled on the unit sphere per unit time. Inclination velocity is the derivative of the postural inclination angle relative to gravity with respect to time. Neither method captures the full extent of upper arm angular velocity. We propose a new method, the gyroscope vector magnitude (GVM), and demonstrate how GVM captures angular velocities around all motion axes and more accurately represents the true angular velocities of the upper arm. We use optical motion capture data to demonstrate that the previous methods for calculating angular velocities capture 89% and 77% relative to our proposed method.

Wearable Motion Capture Devices for the Prevention of Work-Related Musculoskeletal Disorders in Ergonomics-An Overview of Current Applications, Challenges, and Future Opportunities

Work-related musculoskeletal disorders (WMSDs) are a major contributor to disability worldwide and substantial societal costs. The use of wearable motion capture instruments has a role in preventing WMSDs by contributing to improvements in exposure and risk assessment and potentially improved effectiveness in work technique training. Given the versatile potential for wearables, this article aims to provide an overview of their application related to the prevention of WMSDs of the trunk and upper limbs and discusses challenges for the technology to support prevention measures and future opportunities, including future research needs. The relevant literature was identified from a screening of recent systematic literature reviews and overviews, and more recent studies were identified by a literature search using the Web of Science platform. Wearable technology enables continuous measurements of multiple body segments of superior accuracy and precision compared to observational tools. The technology also enables real-time visualization of exposures, automatic analyses, and real-time feedback to the user. While miniaturization and improved usability and wearability can expand the use also to more occupational settings and increase use among occupational safety and health practitioners, several fundamental challenges remain to be resolved. The future opportunities of increased usage of wearable motion capture devices for the prevention of work-related musculoskeletal disorders may require more international collaborations for creating common standards for measurements, analyses, and exposure metrics, which can be related to epidemiologically based risk categories for work-related musculoskeletal disorders.

Shoulder Performance Activity Test (SPAT) for People With Shoulder Pain: Feasibility, Reliability, and Validity

OBJECTIVE

The purpose of this study was to assess feasibility, reliability, and validity of a new performance-based test, the Shoulder Performance Activity Test (SPAT).

METHODS

People with shoulder pain (n = 93) and without shoulder pain (n = 43) were included. The SPAT consists of overhead reach, hand behind head, and hand behind back tasks, each performed with 20 repetitions and rated by time, pain, and effort. The SPAT scores were summed for time, pain, and effort, and a total score across the 3 tasks. Feasibility was assessed by the percentage of SPAT task completion, test-retest reliability by intraclass correlation coefficient (ICC), standard error measurement, minimal detectable change, and known-groups construct validity by comparing between groups (shoulder pain and no pain) and between shoulders in those with pain.

RESULTS

All participants performed the 3 SPAT tasks. The ICC was 0.74-0.91, and the minimal detectable change was 3.1-4.7 for task scores and 10.0 points for the total score. Individuals with pain presented higher tasks and total scores compared with those without pain. The moderate/severe pain group had higher scores than the low pain and no shoulder pain groups, and the low pain group had higher scores than the no pain group. Scores were higher in the involved shoulder compared with the uninvolved shoulder.

CONCLUSION

The SPAT is a feasible and reliable performance-based test for use in patients with shoulder pain and can differentiate between individuals with and without pain, among different levels of pain, and between involved and uninvolved shoulders.

IMPACT

The SPAT provides a standardized method for clinicians to assess shoulder functional performance tasks, which can enable a comprehensive assessment of shoulder disability and clinical decision making. The error metrics can be used to determine meaningful changes in performance.

Prevalence of musculoskeletal disorders, working conditions, and related risk factors in the meat processing industry: Comparative analysis of Iran-Poland

BACKGROUND

Activities performed by people in the meat processing industry are very repetitive, time-consuming, dangerous, and require long-term downtime during a shift (forced-static position).

OBJECTIVES

This study aims to assess the prevalence of musculoskeletal disorders and working conditions among Polish and Iranian workers to fill this research gap.

METHODS

A comparative analysis of the prevalence of musculoskeletal disorders (MSDs) in developed and developing countries was conducted. After selecting the target factories, data was collected using Nordic and Mental Stress Questionnaires and 3DSSPP software with the participation of 110 meat processing workers, including 55 Iranian and 55 Polish.

RESULTS

This study showed nearly the same prevalence of MSDs among male Iranian and Polish workers, especially in elbow, wrist/hand, upper back, hip/thigh, and ankle/foot. The overall prevalence of MSDs was relatively high and connected to the lower back (38%, 64%), knee (40%, 24%), neck (24%, 42%), and upper back (24%, 34.5%), among Iranian and Polish workers, respectively. Assessment of logistic regression disclosed that the workplace is considerably associated with the elbow and the ankle/foot musculoskeletal pain, with 2.34 and 3.81 times more likely for the production room, respectively, among Iranian workers.

CONCLUSION

Age, gender, type of occupation, work experience, smoking, insufficient physical activity, workplace, working postures, and stress level all affected the likelihood of MSDs happening in various body regions in both countries, implying that both individual and work-related (both physical and psychosocial) aspects should be taken into consideration when evaluating and managing such complaints in this workforce.

Mind the gap - development of conversion models between accelerometer- and IMU-based measurements of arm and trunk postures and movements in warehouse work

Sensor type (accelerometers only versus inertial measurement units, IMUs) and angular velocity computational method (inclination versus generalized velocity) have been shown to affect the measurements of arm and trunk movements. This study developed models for conversions between accelerometer and IMU measurements of arm and trunk inclination and between accelerometer and IMU measurements of inclination and generalized (arm) velocities. Full-workday recordings from accelerometers and IMUs of arm and trunk postures and movements from 38 warehouse workers were used to develop 4 angular (posture) and 24 angular velocity (movement) conversion models for the distributions of the data. A power function with one coefficient and one exponent was used, and it correlated well (r2 > 0.999) in all cases to the average curves comparing one measurement with another. These conversion models facilitate the comparison and merging of measurements of arm and trunk movements collected using the two sensor types and the two computational methods.

New Technology and Loss of Paid Employment among Older Workers: Prospective Cohort Study

BACKGROUND

This study investigates the association between the implementation of new technology in the workplace and the subsequent loss of paid employment among older workers.

METHODS

We estimated the prospective risk of loss of paid employment (register-based) from questions on new technology among 10,320 older workers (≥50 years). To investigate potential differences between work types, analyses were stratified by job function: (1) work with symbols (office, administration, analysis, IT), (2) work with people (people, service, care), (3) work in the field of production (processing, producing or moving things).

RESULTS

The introduction of new technology at the workplace reduced the risk of losing paid employment among older workers working with symbols (risk ratio [RR] 0.74, 95% CI 0.72-0.76) and in the field of production (RR 0.83, 95% CI 0.80-0.85), whereas new technology increased this risk among those working with people (RR 1.22, 95% CI 1.19-1.26). Being involved in the introduction of new technology and receiving adequate training in its use decreased the risk of loss of paid employment.

CONCLUSIONS

Depending on the context, the introduction of new technology at work associates positively as well as negatively with future labour market participation among older workers. Worker involvement and adequate training in the use of new technology seem to be important for retaining workers in the labour market.

Effects on variation in shoulder, forearm and low back muscle activity from combining seated computer work with other productive office tasks: results from a simulation study

The effect on muscle activity variation of combining different office tasks is not known. We recorded electromyography from the upper trapezius (UT), wrist extensor (WE) and lumbar erector spinae (LES) in 24 office workers during five productive tasks, and breaks. Minute-to-minute variance was then estimated, by simulations, in a reference 'job' consisting of 85% sitting computer work and 15% breaks, and in 'jobs' where sitting computer work was replaced by different proportions of the other office tasks and breaks. Replacing sitting computer work with sitting non-computer work increased estimated variance by, in median, 23% (UT), 19% (WE) and 0% (LES). Replacing it with other tasks, in particular, standing computer and non-computer work, was less effective in increasing variance. Thus, some combinations of office tasks have a slight potential to increase muscle activity variation in the shoulder and lower arm, but not the lumbar back, while others will be ineffective. Practitioner summary: The need for exposure variation is often emphasised in office ergonomics. We estimated the effect on muscle activity in the shoulder, forearm and lumbar back of combining sitting computer work with other available tasks and breaks, finding that introduction of sitting non-computer tasks and non-desk work slightly increased variation; other tasks were essentially non-effective.

Effects of Sensor Types and Angular Velocity Computational Methods in Field Measurements of Occupational Upper Arm and Trunk Postures and Movements

Accelerometer-based inclinometers have dominated kinematic measurements in previous field studies, while the use of inertial measurement units that additionally include gyroscopes is rapidly increasing. Recent laboratory studies suggest that these two sensor types and the two commonly used angular velocity computational methods may produce substantially different results. The aim of this study was, therefore, to evaluate the effects of sensor types and angular velocity computational methods on the measures of work postures and movements in a real occupational setting. Half-workday recordings of arm and trunk postures, and movements from 38 warehouse workers were compared using two sensor types: accelerometers versus accelerometers with gyroscopes-and using two angular velocity computational methods, i.e., inclination velocity versus generalized velocity. The results showed an overall small difference (<2° and value independent) for posture percentiles between the two sensor types, but substantial differences in movement percentiles both between the sensor types and between the angular computational methods. For example, the group mean of the 50th percentiles were for accelerometers: 71°/s (generalized velocity) and 33°/s (inclination velocity)-and for accelerometers with gyroscopes: 31°/s (generalized velocity) and 16°/s (inclination velocity). The significant effects of sensor types and angular computational methods on angular velocity measures in field work are important in inter-study comparisons and in comparisons to recommended threshold limit values.

Action Levels for the Prevention of Work-Related Musculoskeletal Disorders in the Neck and Upper Extremities: A Proposal

There are several well-known risk factors for work-related musculoskeletal disorders (MSDs). Despite this knowledge, too many people still work in harmful conditions. The absence of occupational exposure limits (OELs) for physical workload impedes both supervision and preventive work. To prevent myalgia, tendon disorders, and nerve entrapments in the upper musculoskeletal system, we propose action levels concerning work postures, movement velocities and muscular loads recorded by wearable equipment. As an example, we propose that wrist velocity should not exceed 20°/s as a median over a working day. This has the potential to reduce the prevalence of carpal tunnel syndrome (CTS) in highly exposed male occupational groups by 93%. By reducing upper arm velocity in highly exposed female groups to the suggested action level 60°/s, the prevalence of pronounced neck/shoulder myalgia with clinical findings (tension neck syndrome) could be reduced by 22%. Furthermore, we propose several other action levels for the physical workload. Our ambition is to start a discussion concerning limits for physical workload, with the long-term goal that OELs shall be introduced in legislation. Obviously, the specific values of the proposed action levels can, and should, be discussed. We hope that quantitative measurements, combined with action levels, will become an integral part of systematic occupational health efforts, enabling reduction and prevention of work-related MSDs.

Cutting force measurement: Hand tool instrumentation used in slaughterhouses - a systematic review

Workers' intensive use of hand tool cutting in the meat packing industry is a risk factor for occupational health, mainly by mechanical compression of tissues in the upper limbs, which can cause Work-Related Musculoskeletal Disorders (WMSDs). This systematic review aimed to identify the characteristics and measured variables of instrumented knives and determine how they should be designed. The review process and article extractions occurred through an analysis of the (article) titles, keywords and abstracts, followed by reading the full texts by two reviewers independently. Searches were conducted in Medline, Web of Science, Science Direct, Scopus, Ebsco and Engineering Village for articles published in peer-reviewed journals from January 2000 to March 2019, in the English language. The result of (the) search included 1289 potentially eligible studies, with 894 duplicated/triplicated/quadruplicated articles that were excluded, resulting in 404 remaining articles of which 33 were considered eligible, with 36 additional articles, totaling 69 evaluated full texts. After the review, none of the 14 analyzed studies, were rated as having good methodological quality. In addition, four types of instrumented knives were used. Data acquisition was performed in both laboratory and meat processing plants. It is noteworthy that only one knife was submitted to a validation process and that the articles did not provide complete technical information about the knives. The result demonstrated that the cutting force varies within and between subjects, tasks, plants and blade finishings. All knives used some type of electrical connection via cable or wires. Of the articles found, none considered the influences that the workers are subject to when they do not use the same tool daily for data acquisition. Therefore, the development of different types of instrumented knives, with wireless data transmission and more rigorous studies are necessary to expand the knowledge of the cutting force and development of WMSD in slaughterhouse workers who perform meat cutting.

Exertion Perception When Performing Cutting Tasks in Poultry Slaughterhouses: Risk Assessment of Developing Musculoskeletal Disorders

Brazil is the leader in poultry meat exports, in which most products are in the form of cuts. This study analyzed the exertion perception of poultry slaughterhouses workers when performing cutting tasks, as well as the influence of knife sharpness on the risk of developing musculoskeletal disorders by Occupational Repetitive Action (OCRA) method. Participants (n = 101) from three slaughterhouses were asked to rate their perceived exertion on the Borg scale during the cutting task when the knife was well and poorly sharpened. The OCRA results showed that the score for cutting with a dull knife was greater (43.57 ± 13.51) than with a sharp knife (23.79 ± 3.10) (p < 0.001). Consequently, there was a significant increase in the risk level of acquiring upper-limb work-related musculoskeletal disorders (UL-WMSD) by using a “poorly sharpened” knife (29%; p < 0.001; Borg scale 2–8). Thus, maintaining well-sharpened knives for optimal performance of the cutting task (fewer technical actions) is suggested, as well as including knife sharpening in the standard operating procedure to reduce musculoskeletal disorders.

Quantification of Exposure to Risk Postures in Truck Assembly Operators: Neck, Back, Arms and Wrists

The study assessed the proportion of time in risky postures for the main joints of the upper limbs in a truck assembly plant and explored the association with musculoskeletal symptoms. Fourteen workstations (13 individuals) of a truck assembly plant were selected, and seven sensors were placed on the body segments of the participants. The sensors included tri-axial accelerometers for the arms and back, inclinometers for the neck and electro-goniometry for quantifying flexion/extension of the right and left hands. The proportions of time in moderate awkward postures were high at all workstations. Neck and wrist excessive awkward postures were observed for most workstations. The average values of the 91st percentile for back flexion and right/left arm elevation were 25°, 62°, and 57°, respectively. The 91st and 9th percentile averages for neck flexion/extension were 35.9° and −4.7°, respectively. An insignificant relationship was found between the percentage of time spent in awkward upper limb posture and musculoskeletal symptoms. The findings provide objective and quantitative data about time exposure, variability, and potential risk factors in the real workplace. Quantitative measurements in the field provide objective data of the body postures and movements of tasks that can be helpful in the musculoskeletal disorders (MSDs) prevention program.

Comparison of two methods of sorting recyclable materials on posture among trash sorters in Brazil: a cross-sectional study

Objective. The aim of the present study was to compare postural exposure between two methods of sorting recyclable materials: manual sorting on a fixed work surface and the use of conveyor belts. Materials and methods. Postures and movements of the head, upper back and upper arms were recorded during 2 h among 40 workers using inclinometers. Sociodemographic variables were collected with the aid of a standardized questionnaire and musculoskeletal symptoms were evaluated using the Nordic musculoskeletal questionnaire. Results. The angular velocity of the head, upper back and upper arms was significantly higher when sorting on a fixed work surface compared to the conveyor belt method. Upper arm elevation was also higher on the fixed work surface. Conclusion. The conveyor belt method showed lower angular velocities during the manual sorting of recyclable materials compared to a fixed work surface.

Factors Influencing the Health and Safety of Temporary Foreign Workers in Skilled and Low-Skilled Occupations in Canada

This article reports on a study of occupational health and safety (OHS) challenges for temporary foreign workers (TFWs) in low- and high-skilled occupations, based on twenty-two cases drawn from a broader study in three Canadian provinces. Interviewees in construction, meat processing, hospitality, and fast food reported concerns regarding working conditions and OHS issues. They include precarious migration status affecting voice; contrasting access to social support; and mechanisms undermining regulatory effectiveness. Sources of vulnerability include closed work permits (making workers dependent on a single employer for job security and family reunification); ineffective means to ensure contractual compliance; and TFW invisibility attributable to their dispersal throughout the labor market. Violations include increased workload without an increase in pay and non-compliance with OHS and contractual rules without oversight. Positive and negative practices are discussed. Recommendations include improving migration security to preserve worker voice and facilitating communication between immigration and OHS authorities.

Trunk and upper arm postures in paper mill work

The aim of this study was to assess postures and movements of the trunk and upper arm during paper mill work, and to determine the extent to which they differ depending on method of assessment. For each of 28 paper mill workers, postures and movements were assessed during three full shifts using inclinometer registration and observation from video. Summary metrics for each shift, e.g., 10^th, 50^th, and 90^th posture percentile, were averaged across shifts and across workers. In addition, the standard deviation between workers, and the standard deviation between shifts within worker were computed. The results showed that trunk and arm postures during paper mill work were similar to other occupations involving manual materials handling, but the velocities of arm movements were lower. While postures determined by inclinometry and observation were similar on a group level, substantial differences were found between results obtained by the two methods for individual workers, particularly for extreme postures. Thus, measurements by either method on individuals or small groups should be interpreted with caution.

Variation in upper extremity, neck and trunk postures when performing computer work at a sit-stand station

Sit-stand tables are introduced in offices to increase variation in gross body posture, but the extent to which upper body posture variation is also affected has not previously been addressed. Neck, trunk, and upper arm postures (means and minute-to-minute variances) were determined during periods of sitting and standing from 24 office workers using sit-stand tables to perform computer work. Posture variability resulting from different temporal compositions of sitting and standing computer work was then predicted for the neck, trunk and upper arm by simulations. Postural variability during computer work could be increased up to three-fold when 20-60% of the work was performed standing (i.e. 40-80% performed sitting), compared to performing computer work only sitting. The exact composition of sit-stand proportions leading to maximum variability, as well as the potential size of the increase in variability, differed considerably between workers. Guidelines for sit-stand table use should note these large inter-individual differences.

Self-recordings of upper arm elevation during cleaning - comparison between analyses using a simplified reference posture and a standard reference posture

BACKGROUND

To reduce ergonomic risk factors in terms of awkward and constrained postures and high velocities, it is important to perform adequate risk assessments. Technical methods provide objective measures of physical workload. These methods have so far mainly been used by researchers. However, if written instructions how to apply the sensors and how to adopt the reference posture are provided, together with triaxial accelerometers, it may be possible for employees to record their own physical workload. The exposure in terms of e.g. upper arm elevations could then easily be assessed for all workers in a workplace. The main aims of this study were: 1) to compare analyses for self-recording of upper arm elevation during work using a simplified reference posture versus using a standard reference posture, and 2) to compare the two reference postures.

METHODS

Twenty-eight cleaners attached an accelerometer to their dominant upper arm and adopted a simplified reference according to a written instruction. They were thereafter instructed by a researcher to adopt a standard reference. Upper arm elevations were recorded for 2 or 3 days. Each recording was analysed twice; relative to the simplified reference posture and relative to the standard reference posture. The group means of the differences in recorded upper arm elevations between simplified and standard reference analyses were assessed using Wilcoxon signed ranks test. Furthermore, we calculated the group mean of the differences between the simplified reference posture and the standard reference posture.

RESULTS

For arm elevation during work (50th percentile), the group mean of the differences between the two analyses was 0.2° (range -7 - 10°). The group mean of the differences between the two references was 9° (range 1 - 21°). The subjects were able to follow the instructions in the protocol and performed self-recording of upper arm elevation and velocity.

CONCLUSIONS

The small difference between the two analyses indicates that recordings performed by employees themselves are comparable, on a group level, with those performed by researchers. Self-recordings in combination with action levels would provide employers with a method for risk assessment as a solid basis for prevention of work-related musculoskeletal disorders.

Effect of Time Elapsed since Last Pruner Maintenance on Upper-Extremity Biomechanics during Manual Flower Cutting

OBJECTIVE

Manual flower cutting imposes large biomechanical demands on workers' upper extremities. Solutions are required to reduce these demands. This study investigated the effect of time elapsed since the last pruner maintenance on the biomechanical demands of the upper extremities during flower-cutting operations.

METHODS

Sixteen experienced workers were recruited. All workers performed flower cutting 1, 15, and 30 days after standard pruner maintenance, including cleaning, adjustment, and sharpening. The outcomes included kinematics of the wrist, elbow, and forearm; muscular activity of the extensor carpi radialis, extensor carpi ulnaris, flexor carpi radialis, flexor carpi ulnaris, biceps and medium deltoids of the dominant arm; and self-reported effort.

RESULTS

On average across muscles, a 15-day delay (from 1 to 15 and from 15 to 30 days) in the execution of pruner maintenance increased over 8% the median recorded muscular activity as measured by the percentage of the maximum voluntary contraction of the root mean square signal. An increase in time since last pruner maintenance resulted in an increase in the 90th percentile pronation-supination posture (larger excursion toward pronation); the median and the 90th percentile velocity of the wrist and elbow; and the 90th percentile acceleration in the pronation-supination direction. There was an increase in perceived effort as measured by a Borg scale as time since last maintenance increased from 1 to 15 days.

CONCLUSION

Increasing the frequency of pruner maintenance procedures can effectively reduce workers' mechanical exposures during manual flower-cutting operations. Companies should implement daily maintenance programs considering their implementation capacity and expected benefits.

Can exposure variation be promoted in the shoulder girdle muscles by modifying work pace and inserting pauses during simulated assembly work?

This study investigated the acute effects of changing the work pace and implementing two pause types during an assembly task. Eighteen healthy women performed a simulated task in four different conditions: 1) slow or 2) fast work pace with 3) passive or 4) active pauses every two minutes. The root mean square (RMS) and exposure variation analysis (EVA) from the trapezius and serratus anterior muscles, as well as the rate of perceived exertion (RPE) from the neck-shoulder region, were observed. Decreased RMS and RPE as well as more variable muscle activity (EVA) were observed in the slow work pace compared with the fast one. The pause types had a limited effect, but active pauses resulted in increased RMS of the clavicular trapezius. The findings revealed the importance of work pace in the reduction of perceived exertion and promotion of variation in muscle activation during assembly tasks. However, the pause types had no important effect on the evaluated outcomes.

The coordination of shoulder girdle muscles during repetitive arm movements at either slow or fast pace among women with or without neck-shoulder pain

PURPOSE

The aim of this study was to evaluate the coordination of the shoulder girdle muscles among subjects with or without neck-shoulder pain performing repetitive arm movement at either a slow or fast pace.

METHODS

Thirty female adults were allocated to one of two groups-healthy controls or cases with neck-shoulder pain. Surface electromyography (sEMG) signals from the clavicular, acromial, middle and lower trapezius portions and the serratus anterior muscles were recorded during a task performed for 20min at a slow pace and 20min at a fast pace. The root mean square (RMS), relative rest time (RRT) and normalised mutual information (NMI, an index of functional connectivity between two muscles in a pair) were computed.

RESULTS

No significant differences on RMS, RRT and NMI were found between groups. For both groups, the fast movement pace resulted in increased levels of RMS, lower degrees of RRT and higher NMI compared to the slow pace. No interaction between group and movement pace was found.

CONCLUSIONS

This study highlights the change in sEMG activity of muscles to meet the demands of performing a task at fast movement pace. The fast pace imposed a higher muscle demand evidenced by increased sEMG amplitude, low degree of muscle rest and increased functional connectivity for subjects in both the case and control groups. No indication of impaired sEMG activity was found in individuals with neck-shoulder pain.

The origin of the Acheulean. Techno-functional study of the FLK W lithic record (Olduvai, Tanzania)

The Acheulean materials documented in FLK West dated c. 1.7 Ma. are the focus of the present work. An original techno-functional approach is applied here to analyze the origin of Acheulean tools. According to the results, these tools were employed in different functional contexts in which tasks of different durations that transformed resources with different resistances were carried out. The exploitation of large and resistant resources suggests that the economic mechanism governing the manufacture of these tools was an increase in the demand of the work load. The decision processes underlying the production of these tools have thus an evident functional motivation. However, the presence of a refined handaxe in the studied sample indicates that the design form and production principles of handaxe manufacture were the result of an abrupt emergence rather than a long gradual development. The integration of mechanical and ergonomic investigation in our research has been crucial to explain how a core-and-flake industry gave way to a technology based on the production of large and heavy shaped tools.

Thermal stress, human performance, and physical employment standards

Many physically demanding occupations in both developed and developing economies involve exposure to extreme thermal environments that can affect work capacity and ultimately health. Thermal extremes may be present in either an outdoor or an indoor work environment, and can be due to a combination of the natural or artificial ambient environment, the rate of metabolic heat generation from physical work, processes specific to the workplace (e.g., steel manufacturing), or through the requirement for protective clothing impairing heat dissipation. Together, thermal exposure can elicit acute impairment of work capacity and also chronic effects on health, greatly contributing to worker health risk and reduced productivity. Surprisingly, in most occupations even in developed economies, there are rarely any standards regarding enforced heat or cold safety for workers. Furthermore, specific physical employment standards or accommodations for thermal stressors are rare, with workers commonly tested under near-perfect conditions. This review surveys the major occupational impact of thermal extremes and existing employment standards, proposing guidelines for improvement and areas for future research.

Intraoperative workload in robotic surgery assessed by wearable motion tracking sensors and questionnaires

BACKGROUND

The introduction of robotic technology has revolutionized radical prostatectomy surgery. However, the potential benefits of robotic techniques may have trade-offs in increased mental demand for the surgeon and the physical demand for the assisting surgeon. This study employed an innovative motion tracking tool along with validated workload questionnaire to assess the ergonomics and workload for both assisting and console surgeons intraoperatively.

METHODS

Fifteen RARP cases were collected in this study. Cases were performed by 10 different participants, six primarily performed console tasks and four primarily performed assisting tasks. Participants had a median 12 (min-3, max-25) years of surgical experience. Both console and assisting surgeons performed robotic prostatectomy cases while wearing inertial measurement units (IMUs) that continuously track neck, shoulder, and torso motion without interfering with the sterile environment. Postoperatively, participants completed a workload questionnaire (SURG-TLX) and a body part discomfort questionnaire.

RESULTS

Twenty-six questionnaires were completed from 13 assisting and 13 console surgeons over the 15 cases. Postoperative pain was reported highest for the right shoulder and neck. Mental demands were 41 % higher for surgeons at the console than assisting (p < 0.05), while physical demands were not significantly different. Assisting surgeons worked in demanding neck postures for 58 % of the procedure compared to 24 % for the console surgeon (p < 0.01). Surgeons at the console were primarily static and showed 2-5 times fewer movements than assisting surgeons (p < 0.01).

CONCLUSIONS

Postures were more ergonomic during console tasks than when assisting by the bedside; however, the console may constrain postures leading to static loads that have been associated with musculoskeletal symptoms for the neck, torso, and shoulders. The IMU sensors were effective at quantifying ergonomics in robotic prostatectomies, and these methods and findings have broad applications to other robotic procedures.

Exposure-response relationships for work-related neck and shoulder musculoskeletal disorders--Analyses of pooled uniform data sets

There is a lack of quantitative data regarding exposure-response relationships between occupational risk factors and musculoskeletal disorders in the neck and shoulders. We explored such relationships in pooled data from a series of our cross-sectional studies. We recorded the prevalence of complaints/discomfort (Nordic Questionnaire) and diagnoses (physical examination) in 33 groups (24 female and 9 male) within which the workers had similar work tasks (3141 workers, of which 817 were males). In representative sub-groups, we recorded postures and velocities of the head (N = 299) and right upper arm (inclinometry; N = 306), right wrist postures and velocities (electrogoniometry; N = 499), and muscular activity (electromyography) in the right trapezius muscle (N = 431) and forearm extensors (N = 206). We also assessed the psychosocial work environment (Job Content Questionnaire). Uni- and multivariate linear meta-regression analysis revealed several statistically significant group-wise associations. Neck disorders were associated with head inclination, upper arm elevation, muscle activity of the trapezius and forearm extensors and wrist posture and angular velocity. Right-side shoulder disorders were associated with head and upper arm velocity, activity in the trapezius and forearm extensor muscles and wrist posture and angular velocity. The psychosocial work environment (low job control, job strain and isostrain) was also associated with disorders. Women exhibited a higher prevalence of neck and shoulder complaints and tension neck syndrome than men, when adjusting for postures, velocities, muscular activity or psychosocial exposure. In conclusion, the analyses established quantitative exposure-response relationships between neck and shoulder disorders and objective measures of the physical workload on the arm. Such information can be used for risk assessment in different occupations/work tasks, to establish quantitative exposure limits, and for the evaluation of preventive measures.

Validity of a small low-cost triaxial accelerometer with integrated logger for uncomplicated measurements of postures and movements of head, upper back and upper arms

Repetitive work and work in constrained postures are risk factors for developing musculoskeletal disorders. Low-cost, user-friendly technical methods to quantify these risks are needed. The aims were to validate inclination angles and velocities of one model of the new generation of accelerometers with integrated data loggers against a previously validated one, and to compare meaurements when using a plain reference posture with that of a standardized one. All mean (n = 12 subjects) angular RMS-differences in 4 work tasks and 4 body parts were <2.5° and all mean median angular velocity differences <5.0 °/s. The mean correlation between the inclination signal-pairs was 0.996. This model of the new generation of triaxial accelerometers proved to be comparable to the validated accelerometer using a data logger. This makes it well-suited, for both researchers and practitioners, to measure postures and movements during work. Further work is needed for validation of the plain reference posture for upper arms.

The importance of work organization on workload and musculoskeletal health--Grocery store work as a model

We have evaluated the consequences of work organization on musculoskeletal health. Using a postal questionnaire, answered by 1600 female grocery store workers, their main work tasks were identified and four work groups were defined (cashier, picking, and delicatessen work, and a mixed group, who performed a mix of these tasks). The crude odds ratios (ORs) for neck/shoulder complaints were 1.5 (95% CI 1.0-2.2), 1.1 (0.7-1.5) and 1.6 (1.1-2.3), respectively, compared to mixed work. Adjusting for individual and psychosocial factors had no effect on these ORs. For elbows/hands, no significant differences were found. Technical measurements of the workload showed large differences between the work groups. Picking work was the most strenuous, while cashier work showed low loads. Quantitative measures of variation revealed for mixed work high between minutes variation and the highest between/within minutes variation. Combining work tasks with different physical exposure levels increases the variation and may reduce the risk of musculoskeletal complaints.

An Analysis of Work-Related Musculoskeletal Disorders Among Butchers in Kano Metropolis, Nigeria

Background

Butchering is often associated with high rates of work-related musculoskeletal disorders (WRMSDs). However, published work on the prevalence of WRMSDs among butchers in Nigeria is scarce. This is important because meat processing practices differ across geographical and cultural locations. This study was therefore aimed at analyzing WRMSDs among butchers in Kano metropolis.

Methods

Sociodemographic and work-settings information was obtained from 102 male cattle butchers (age, 37.49 ± 11.68 years) through survey. Information on the prevalence and pattern of musculoskeletal disorders was obtained from the respondents using the Standardized Nordic Questionnaire. Additional information on health seeking practices was also obtained using a pro forma. Associations between the prevalence of WRMSDs and each of the sociodemographic data and work settings were explored using Chi-square analysis. The level of significance was set at p < 0.05.

Results

The 12-month and point prevalence rates of WRMSDs among butchers in this study were 88.2% and 74.5%, respectively. Whereas lower back complaints (66.7%) were the overall and lower body quadrant's most commonly reported WRMSDs among the butchers surveyed, wrist/hand complaints were the leading upper quadrant's (45.1%) most commonly reported WRMSDs among the respondents. There were significant associations between age and majority of WRMSDs in the body regions. Only 23.3% of the 90 individuals who had WRMSD visited the hospital to seek redress for their WRMSD.

Conclusion

The prevalence of WRMSDs is high among butchers in Kano Metropolis. Few individuals with WRMSD utilize healthcare facilities. Age is a major risk factor in this setting.

When is job rotation perceived useful and easy to use to prevent work-related musculoskeletal complaints?

Job rotation is often recommended to optimize physical work demands and prevent work-related musculoskeletal complaints, but little is known about possible facilitators and barriers to its usefulness and ease of use. Following a qualitative research design, semi-structured interviews with employers (n = 12) and workers (n = 11) from the construction industry were conducted. Organizational climate, job autonomy, job characteristics and work processes were mentioned as either facilitators or barriers on an organizational level. Worker characteristics, work behavior and attitude were mentioned as either facilitators or barriers on an individual level. Following a structured approach to assess usefulness of job rotation to optimize physical work exposures and identifying barriers to usefulness and ease of use in relevant stakeholder groups is necessary in order to select or develop strategies to overcome these barriers, or to reject job rotation as a useful or easy to use intervention in the given context.

Task variation during simulated, repetitive, low-intensity work--influence on manifestation of shoulder muscle fatigue, perceived discomfort and upper-body postures

Work-related musculoskeletal disorders are increasing due to industrialisation of work processes. Task variation has been suggested as potential intervention. The objectives of this study were to investigate, first, the influence of task variation on electromyographic (EMG) manifestations of shoulder muscle fatigue and discomfort; second, noticeable postural shoulder changes over time; third, if the association between task variation and EMG might be biased by postural changes. Outcome parameters were recorded using multichannel EMG, Optotrak and the Borg scale. Fourteen participants performed a one-hour repetitive Pegboard task in one continuous and two interrupted conditions with rest and a pick-and-place task, respectively. Manifestations of shoulder muscle fatigue and discomfort feelings were observed throughout the conditions but these were not significantly influenced by task variation. After correction for joint angles, the relation between task variation and EMG was significantly biased but significant effects of task variation remained absent.

PRACTITIONER SUMMARY

Comparing a one-hour continuous, repetitive Pegboard task with two interrupted conditions revealed no significant influences of task variation. We did observe that the relation between task variation and EMG was biased by posture and therefore advise taking account for posture when investigating manifestations of muscle fatigue in assembly tasks.

Increased work pace is unprofitable: a beef-cutting case study

The beef industry worldwide is showing a trend towards increased cutting pace aimed at higher profits. However, prior research in the duck meat industry suggested that a higher cutting pace reduced quality and yield, leading to losses. This study aimed to test this hypothesis by investigating the effects of varying beef-cutting paces on yield, quality and economy. A field experiment was conducted on six workers cutting beef fillet, sirloin and entrecôte. Three types of paces were sequentially tested: Baseline (i.e., status quo), 'Quantity focus' (i.e., pace required to maximise quantity) and 'Quality focus' (i.e., pace required to minimise errors). The results showed a significant drop in yield, increased rate of quality deficiency and economic losses with the change to 'Quantity focus' (from Baseline and 'Quality focus') for all meat types. Workers supported these results and also added health problems to the list. The results confirmed that an increased cutting pace is unprofitable.

On physiological demands and sustainability in meat cutting

Meat cutters' work has been investigated by several researchers. However, knowledge about the physiological demands of meat cutting is almost lacking. The aim of this explorative study was to assess physiological demands in meat cutting, to compare them with International Labour Organization (ILO) recommendations for acceptable workload and to discuss the findings in relation to individual and work-related factors. In accordance with the ILO recommendations, work was categorised as sustainable or non-sustainable based on critical relative aerobic strain (RAS) levels. Twenty-one beef and pork cutters participated in the study, which included workload measurements, assessment of workplace and individual factors. Thirteen meat cutters were categorised as having non-sustainable and eight as having sustainable work. Results suggest that the workload is higher in beef cutting than in pork cutting, and that longer work experience is related to lower RAS. Other factors contributing to the physical workload are discussed.

PRACTITIONER SUMMARY

Meat-cutting work may exceed recommended physical workload levels. Beef cutting is physically more demanding than pork cutting. Furthermore, factors such as years in the profession, knife sharpness, work pace, wage system, working technique, maximum oxygen uptake level and muscular strength should be considered when planning actions regarding the workload for meat cutters.

Can cognitive activities during breaks in repetitive manual work accelerate recovery from fatigue? A controlled experiment

Neurophysiologic theory and some empirical evidence suggest that fatigue caused by physical work may be more effectively recovered during “diverting” periods of cognitive activity than during passive rest; a phenomenon of great interest in working life. We investigated the extent to which development and recovery of fatigue during repeated bouts of an occupationally relevant reaching task was influenced by the difficulty of a cognitive activity between these bouts. Eighteen male volunteers performed three experimental sessions, consisting of six 7-min bouts of reaching alternating with 3 minutes of a memory test differing in difficulty between sessions. Throughout each session, recordings were made of upper trapezius muscle activity using electromyography (EMG), heart rate and heart rate variability (HRV) using electrocardiography, arterial blood pressure, and perceived fatigue (Borg CR10 scale and SOFI). A test battery before, immediately after and 1 hour after the work period included measurements of maximal shoulder elevation strength (MVC), pressure pain threshold (PPT) over the trapezius muscles, and a submaximal isometric contraction. As expected, perceived fatigue and EMG amplitude increased during the physical work bouts. Recovery did occur between the bouts, but fatigue accumulated throughout the work period. Neither EMG changes nor recovery of perceived fatigue during breaks were influenced by cognitive task difficulty, while heart rate and HRV recovered the most during breaks with the most difficult task. Recovery of perceived fatigue after the 1 hour work period was also most pronounced for the most difficult cognitive condition, while MVC and PPT showed ambiguous patterns, and EMG recovered similarly after all three cognitive protocols. Thus, we could confirm that cognitive tasks between bouts of fatiguing physical work can, indeed, accelerate recovery of some factors associated with fatigue, even if benefits may be moderate and some responses may be equivocal. Our results encourage further research into combinations of physical and mental tasks in an occupational context.

Sex differences in task distribution and task exposures among Danish house painters: an observational study combining questionnaire data with biomechanical measurements

OBJECTIVES

Sex differences in occupational biomechanical exposures may be part of the explanation why musculoskeletal complaints and disorders tend to be more common among women than among men. We aimed to determine possible sex differences in task distribution and task-specific postures and movements of the upper extremities among Danish house painters, and to establish sex-specific task exposure matrices.

METHODS

To obtain task distributions, we sent out a questionnaire to all members of the Painters' Union in Denmark (N = 9364), of whom 53% responded. Respondents reported their task distributions in a typical week. To obtain task exposures, postures and movements were measured in 25 male and 25 female house painters for one whole working day per person. We used goniometers on the wrists, and inclinometers on the forehead and the upper arms. Participants filled in a logbook allowing task-specific exposures to be identified. Percentiles and % time with non-neutral postures were used to characterise postures. Velocity, range of motion, repetitiveness, and variation were used as measures of movement. Cochran-Mantel-Haenszel statistics and unpaired double-sided t-tests with post-hoc Bonferroni correction were used to evaluate sex differences.

RESULTS

Statistically significant (p<0.05) sex differences were revealed in task proportions, but the proportions differed by less than 4%. For task exposures, no statistically significant sex differences were found.

CONCLUSIONS

Only minor sex differences were found in task distribution and task exposures regarding postures and movements among Danish house painters. Sex-specific task exposure matrices were established.

Effects of job rotation on musculoskeletal complaints and related work exposures: a systematic literature review

The aim of this systematic review was to summarise evidence on the effects of job rotation on musculoskeletal complaints, exposures related to musculoskeletal complaints and sustainable working life parameters. A total of 16 studies were included. No studies on sustainable working life parameters were found. The quality of the studies was assessed using a checklist; eight field studies and three laboratory studies of sufficient quality were used to summarise the following evidence: one field study showed positive results and one field study showed negative results for musculoskeletal complaints, two field studies showed positive results and two field studies showed inconsistent results for exposures, and two field studies showed inconsistent results for musculoskeletal complaints and exposures. Two laboratory studies showed inconsistent results and one laboratory study showed no changes for exposures. In conclusion, there is currently inconsistent evidence for positive or negative effects of job rotation on musculoskeletal complaints and exposures related to musculoskeletal complaints. Practitioner's Summary: Currently, there is inconsistent evidence for recommending job rotation as a strategy for preventing musculoskeletal complaints. Exposures from all involved work activities and body regions should be identified and assessed first, to determine if job rotation provides increased exposure variation and/or beneficial changes in mean exposures related to musculoskeletal complaints.

Posture variation among office workers when using different information and communication technologies at work and away from work

Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF(90-10) and EVA(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction.

The evaluation of ergonomic risk factors among meat cutters working in Jabalpur, India

BACKGROUND

Manual meat cutters in India are at high risk of work-related musculoskeletal disorders (WMSDs) for a variety of reasons including holding awkward postures, repetitive forceful exertions, and inadequate rest. This is the first study of its kind to investigate the nature and magnitude of WMSDs among manual meat cutters in India.

OBJECTIVE

The aim of this study was to measure the ergonomic risk factors for WMSDs among adult male manual meat cutters working in Jabalpur, India.

METHODS

We used direct observation, activity analysis, questionnaires, interviews, photography, and video to measure the quantitative ergonomic risk factors.

RESULTS

Ovako working posture analysis indicated high scores (four for the back in peeling, six for the arms in cutting, and six for the arms during mincing tasks). Rapid entire body assessment method (REBA) scores were also high at 10/10 for deboning and mincing tasks, all associated with repetitive movements of the arms and awkward posture of the upper part of the body.

CONCLUSIONS

The study indicates that most tasks for meat cutters fall in the high-risk category for occupational injury. Results suggest that ergonomic interventions that address retooling and workstation and process redesign would be useful in reducing the number of injuries.

The influence of task variation on manifestation of fatigue is ambiguous - a literature review

Task variation has been proposed to reduce shoulder fatigue resulting from repetitive hand-arm tasks. This review analyses the effect of task variation, both 'temporal (i.e. change of work-rest ratio)' and 'activity (i.e. job rotation)' variation, on physiological responses, endurance time (ET) and subjective feelings. Pubmed was searched and complemented with references from selected articles, resulting in 17 articles. Temporal variation had some positive effects on the objective parameters, as blood pressure decreased and ET increased, and on the subjective feelings, as perceived discomfort decreased. The observed findings of activity variation showed both positive and negative effects of increased activity variation, while hardly any effects were found on electromyography manifestations of fatigue. In conclusion, the evidence for positive effects of increasing the level of variation is scarce. The number of studies on variation is limited, while in most studies the findings were not controlled for the amount or intensity of work.

Is Borg's perceived exertion scale a useful indicator of muscular and cardiovascular load in blue-collar workers with lifting tasks? A cross-sectional workplace study

Purpose

To investigate associations between perceived exertion and objectively assessed muscular and cardiovascular load during a full working day among workers with manual lifting tasks.

Methods

A total of 159 men and 41 women from 14 workplaces with manual lifting tasks participated. Participants reported perceived exertion (BORG-CR10) at midday and after work. Surface electromyography of the thigh, lower back and neck muscles were normalized to isometric voluntary contractions (MVC) to express relative muscle load during the day. Cardiovascular load was measured with electrocardiography and calculated as the average percentage of the heart rate reserve capacity (((heart rate during work – resting heart rate) / (maximum heart rate − resting heart rate)) * 100) during the day.

Results

Using linear regression, significant but weak associations (β < 0.23) were observed between perceived exertion and (1) high muscle activity (>60 % of MVC) of the neck muscles and (2) inactivity (<1 % of MVC) of the thigh muscles and (3) cardiovascular load, respectively. Using logistic regression, perceived exertion ≥4 (high exertion), referencing <4 (low-to-moderate exertion), was related to high activity of the trapezius muscle [OR 18 (95 % CI 2–143)], i.e., the odds for experiencing high exertion during work increased 18-fold for each percentage increase in time above 60 % MVC.

Conclusions

During a full working day among blue-collar workers with lifting tasks, high neck muscle activity increases the odds for experiencing high perceived physical exertion. Perceived exertion of at least 4 on the BORG CR10 scale appears to be a good indicator that high muscular loading occurs.

Electronic supplementary material

The online version of this article (doi:10.1007/s00421-013-2782-9) contains supplementary material, which is available to authorized users.

Use of pedometer-driven walking to promote physical activity and improve health-related quality of life among meat processing workers: a feasibility trial

BACKGROUND

Current evidence supports the use of pedometers as effective motivational tools to promote physical activity and improve health-related quality of life in the general population. The aims of this study are to examine whether a pedometer-driven walking programme can improve health-related quality of life, and increase ambulatory activity in a population of meat processing workers when compared to a control group receiving educational material alone.

METHODS/DESIGN

A feasibility study employing a randomized controlled trial (RCT) design will collect data at three time points. A sample of up to 60 meat workers will be recruited and randomly assigned to either an intervention group N = 30 (12-week pedometer-driven walking program, brief intervention, and educational material), or control group N = 30 (educational material only). The primary outcomes of ambulatory activity, health-related quality of life, and functional capacity, will be evaluated at baseline, immediately following the 12-week intervention and then at three month post-intervention.

DISCUSSION

This paper describes the design of a feasibility randomized controlled trial, which aims to assess the effectiveness of the introduction of a workplace pedometer-driven walking program compared to normal lifestyle advice in meat processing workers.

TRIAL REGISTRATION NUMBER (ANZCTR)

12613000087752.

Participatory ergonomic intervention versus strength training on chronic pain and work disability in slaughterhouse workers: study protocol for a single-blind, randomized controlled trial

Background

The prevalence of musculoskeletal pain in the shoulder, arm and hand is high among slaughterhouse workers, allegedly due to the highly repetitive and forceful exposure of these body regions during work. Work disability is a common consequence of these pains. Lowering the physical exposure through ergonomics intervention is the traditional strategy to reduce the workload. An alternative strategy could be to increase physical capacity of the worker through strength training. This study investigates the effect of two contrasting interventions, participatory ergonomics versus strength training on pain and work disability in slaughterhouse workers with chronic pain.

Methods/design

66 slaughterhouse workers were allocated to 10 weeks of (1) strength training of the shoulder, arm and hand muscles for 3 x 10 minutes per week, or (2) participatory ergonomics involving counseling on workstation adjustment and optimal use of work tools (~usual care control group). Inclusion criteria were (1) working at a slaughterhouse for at least 30 hours per week, (2) pain intensity in the shoulder, elbow/forearm, or hand/wrist of at least 3 on a 0–10 VAS scale during the last three months, (3) pain lasting for more than 3 months, (4) frequent pain (at least 3 days per week) (5) at least moderate work disability, (6) no strength training during the last year, (7) no ergonomics instruction during the last year.

Perceived pain intensity (VAS scale 0–10) of the shoulder, elbow/forearm and hand/wrist (primary outcome) and Disability of the Arm, Shoulder and Hand (Work module, DASH questionnaire) were measured at baseline and 10-week follow-up. Further, total muscle tenderness score and muscle function were assessed during clinical examination at baseline and follow-up.

Discussion

This RCT study will provide experimental evidence of the effectiveness of contrasting work-site interventions aiming at reducing chronic pain and work disability among employees engaged in repetitive and forceful work.

Trial registration

ClinicalTrials.gov:NCT01671267