The joint effects on Photobacterium phosphoreum of metal oxide nanoparticles and their most likely coexisting chemicals in the environment

Nanocolloids in the soil environment: Transformation, transport and ecological effects

Nanocolloids (Ncs) are ubiquitous in natural systems and play a critical role in the biogeochemical cycling of trace metals and the mobility of organic pollutants. However, the environmental behavior and ecological effects of Ncs in the soil remain largely unknown. The accumulation of Ncs may have detrimental or beneficial effects on different compartments of the soil environment. This review discusses the major transformation processes (e.g., agglomeration/aggregation, absorption, deposition, dissolution, and redox reactions), transport, bioavailability of Ncs, and their roles in element cycles in soil systems. Notably, Ncs can act as effective carriers for other pollutants and contribute to environmental pollution by spreading pathogens, nutrients, heavy metals, and organic contaminants to adjacent water bodies or groundwater. Finally, the key knowledge gaps are highlighted to better predict their potential risks, and important new directions include exploring the geochemical process and mechanism of Ncs's formation; elucidating the transformation, transport, and ultimate fate of Ncs, and their long-term effect on contaminants, organisms, and elemental cycling; and identifying the impact on the growth and quality of important crops, evaluating its dominant effect on agro-ecosystems in the soil environment.

Application of luminescent Photobacterium Phosphoreum T3 for the detection of zearalenone and estimating the efficiency of their enzymatic degradation

Zearalenone (ZEN), a nonsteroidal estrogenic mycotoxin, causes enormous economic losses in the food and feed industries. Simple, rapid, low-cost, and quantitative analysis of ZEN is particularly urgent in the fields of food safety and animal husbandry. Using the bioluminescent bacterium Photobacterium phosphoreum T3, we propose a bioluminescence inhibition assay to evaluate ZEN levels quickly. The limit of detection (LOD), limit of quantification (LOQ), and quantitative working range of this bioluminescence inhibition assay were 0.1 µg/mL, 5 µg/mL, and 5-100 µg/mL, respectively. The concentration-response curve of the bioluminescence inhibition rate and ZEN concentration was plotted within the range 5 to 100 μg/mL, as follows: y = 0.0069x2 - 0.0190x + 7.9907 (R2 = 0.9943, y is luminescence inhibition rate, x is ZEN concentration). First, we used the bioluminescence inhibition assay to detect the remaining ZEN in samples treated with purified lactonohydrolase ZHD101. The bioluminescence inhibition assay results showed a strong correlation with the HPLC analysis. Furthermore, we successfully evaluated the overall toxicity of samples treated with purified peroxidase Prx and H2O2 using the P. phosphoreum T3 bioluminescence inhibition assay. The results indicate that the degradation products of ZEN created by purified peroxidase Prx and H2O2 showed little toxicity to P. phosphoreum T3. In this study, a simple, rapid, and low-cost assay method of zearalenone by bioluminescent P. phosphoreum T3 was developed. The bioluminescence inhibition assay could be used to estimate the efficiency of enzymatic degradation of ZEN.

SN38-loaded nanomedicine mediates chemo-radiotherapy against CD44-expressing cancer growth

Background

Chemo-radiotherapy is the combined chemotherapy and radiotherapy on tumor treatment to obtain the local radiosensitization and local cytotoxicity of the tumor and to control the microscopic metastatic disease.

Methods

In this study, 7-ethyl-10-hydroxycamptothecin (SN38) molecules could be successfully loaded into human serum albumin (HSA)–hyaluronic acid (HA) nanoparticles (SH/HA NPs) by the hydrophobic side groups of amino acid in HSA.

Results

HSA could be used to increase the biocompatibility and residence time of the nanoparticles in the blood, whereas HA could improve the benefits and overall treatment effect on CD44-expressing colorectal cancer (CRC), and reduce drug side effects. In addition to its role as a chemotherapeutic agent, SN38 could be used as a radiosensitizer, able to arrest the cell cycle, and allowing cells to stay in the G2/M stage, to improve the sensitivity of tumor cells to radiation. In vivo results demonstrated that SH/HA NPs could accumulate in the tumor and produce significant tumor suppression, with no adverse effects observed when combined with γ-ray irradiation. This SH/HA NPs-medicated chemo-radiotherapy could induce an anti-tumor immune response to inhibit the growth of distal tumors, and produce an abscopal effect.

Conclusions

Therefore, this SN38-loaded and HA-incorporated nanoparticle combined with radiotherapy may be a promising therapeutic artifice for CRC in the future.

Species-dependent responses of crop plants to polystyrene microplastics

Only recently there has been a strong focus on the impacts of microplastics on terrestrial crop plants. This study aims to examine and compare the effects of microplastics on two monocotyledonous (barley, Hordeum vulgare and wheat, Triticum aestivum), and two dicotyledonous (carrot, Daucus carota and lettuce, Lactuca sativa) plant species through two complimentary experiments. First, we investigated the effects of low, medium, and high (103, 105, 107 particles per mL) concentrations of 500 nm polystyrene microplastics (PS-MPs) on seed germination and early development. We found species-dependent effects on the early development, with microplastics only significantly affecting lettuce and carrot. When acutely exposed during germination, PS-MPs significantly delayed the germination of lettuce by 24%, as well as promoted the shoot growth of carrot by 71% and decreased its biomass by 26%. No effect was recorded on monocot species. Secondly, we performed a chronic (21 d) hydroponic experiment on lettuce and wheat. We observed that PS-MPs significantly reduced the shoot growth of lettuce by up to 35% and increased its biomass by up to 64%, while no record was reported on wheat. In addition, stress level indicators and defence mechanisms were significantly up-regulated in both lettuce and wheat seedlings. Overall, this study shows that PS-MPs affect plant development: impacts were recorded on both germination and growth for dicots, and responses identified by biochemical markers of stress were increased in both lettuce and wheat. This highlights species-dependent effects as the four crops were grown under identical conditions to allow direct comparison. For future research, our study emphasizes the need to focus on crop specific effects, while also working towards knowledge of plastic-induced impacts at environmentally relevant conditions.

Nano- and microplastics commonly cause adverse impacts on plants at environmentally relevant levels: A systematic review

Over the last years there has been significant research on the presence and effects of plastics in terrestrial systems. Here we summarize current research findings on the effects of nano- and microplastics (NMPs) on terrestrial plants, with the aim to determine patterns of response and sensitive endpoints. We conducted a systematic review (based on 78 studies) on the effects of NMPs on germination, plant growth and biochemical biomarkers. This review highlights that the majority of studies to date have used pristine polystyrene or polyethylene particles, either in a hydroponic or pot-plant setup. Based on these studies we found that effects on plants are widespread. We noted similar responses between and within monocots and dicots to NMPs, except for consistent lower germination seen in dicots exposed to NMPs. During early development, germination and root growth are more strongly affected compared to shoot growth. NMPs induced similar adverse growth effects on plant biomass and length in the most tested plant species (lettuce, wheat, corn, and rice) irrespective of the polymer type and size used. Moreover, biomarker responses were consistent across species; chlorophyll levels were commonly negatively affected, while stress indicators (e.g., ROS or free radicals) and stress respondents (e.g., antioxidant enzymes) were consistently upregulated. In addition, effects were commonly observed at environmentally relevant levels. These findings provide clear evidence that NMPs have wide-ranging impacts on plant performance. However, as most studies have been conducted under highly controlled conditions and with pristine plastics, there is an urgent need to test under more environmentally realistic conditions to ensure the lab-based studies can be extrapolated to the field.

Acute toxicity assessment of indoor dust extracts by luminescent bacteria assays with Photobacterium Phosphoreum T3

In the last decades, there has been an increasing concern about the human exposure to indoor dust. Therefore, it is imperative to assess the toxicity of indoor dust and associated dust extracts. In this study, the acute toxicity assessment of indoor dust was performed using a bioluminescence test, with Photobacterium phosphoreum T₃ (PPT₃) chosen as the test bacterium. The different indoor dust samples were collected from residences, offices, dormitories and laboratories in Shanghai, China. Our data reveal that PPT₃ is more active to water-soluble ions and organic contaminants at low concentrations, while extract solutions elicit increased bacterial toxicity at high concentrations. The results of a bioluminescence assay by PPT₃ indicated that the dust organic extracts exhibited increased toxicity compared with the water exacts. Dust extracts from the laboratory exhibited the greatest bacterial toxicity when compared with office, dormitory and residence samples. Moreover, office dust exhibited higher bacterial toxicity than residence dust. Furthermore, the comprehensive toxicity of dust on PPT₃ was assessed by extracts toxicity -addition (i.e. IR_addition). The calculated values were close to the corresponding experimental data. The bioluminescence test showed the indoor dust samples are weakly toxic to PPT₃, which are equivalent to 0.046-0.123 mg Hg•L^-1. Different dust extracts among the different sampling sites showed varying toxicity to PPT₃. This study provides some important information to understand the potential health risk from different indoor environment using a rapid bioluminescence assay.

A mechanistic perspective on targeting bacterial drug resistance with nanoparticles

Bacterial infections are an important cause of mortality worldwide owing to the prevalence of drug resistant bacteria. Bacteria develop resistance against antimicrobial drugs by several mechanisms such as enzyme inactivation, reduced cell permeability, modifying target site or enzyme, enhanced efflux because of high expression of efflux pumps, biofilm formation or drug-resistance gene expression. New and alternative ways such as nanoparticle (NP) applications are being established to overcome the growing multidrug-resistance in bacteria. NPs have unique antimicrobial characteristics that make them appropriate for medical application to overcome antibiotic resistance. The proposed antibacterial mechanisms of NPs are cell membrane damage, changing cell wall penetration, reactive oxygen species (ROS) production, effect on DNA and proteins, and impact on biofilm formation. The present review mainly focuses on discussing various mechanisms of bacterial drug resistance and the applications of NPs as alternative antibacterial systems. Combination therapy of NPs and antibiotics as a novel approach in medicine towards antimicrobial resistance is also discussed.

Engineering nanoscale hierarchical morphologies and geometrical shapes for microbial inactivation in aqueous solution

Here, we study the effect of hierarchical and one-dimensional (1D) metal oxide nanorods (H-NRs) such as γ-Al₂O₃, β-MnO₂, and ZnO as microbial inhibitors on the antimicrobial efficiency in aqueous solution. These microbial inhibitors are fabricated in a diverse range of nanoscale hierarchical morphologies and geometrical shapes that have effective surface exposure, and well-defined 1D orientation. For instance, γ-Al₂O₃ H-NRs with 20 nm width and ˂0.5 μm length are grown dominantly in the [400] direction. The wurtzite structures of β-MnO₂ H-NRs with 30 nm width and 0.5-1 μm length are preferentially oriented in the [100] direction. Longitudinal H-NRs with a width of 40 nm and length of 1 μm are controlled with ZnO wurtzite structure and grown in [0001] direction. The antimicrobial efficiency of H-NRs was evaluated through experimental assays using a set of microorganisms (Gram-positive Staphylococcus aureus, Bacillus thuriginesis, and Bacillus subtilis) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. Minimal inhibitory and minimum bactericidal concentrations (MIC and MBC) were determined. These 1D H-NRs exhibited antibacterial activity against all the used strains. The active surface exposure sites of H-NRs play a key role in the strong interaction with the thiol units of vital bacterial enzymes, leading to microbial inactivation. Our finding indicates that the biological effect of the H-NR surface planes on microbial inhibition is decreased in the order of [400]-γ-Al₂O₃ > [100]-β-MnO₂ > [0001]-ZnO geometrics. The lowest key values including MIC (1.146 and 0.250 μg/mL), MBC (1.146, 0.313 μg/mL), and MIC/MFC (0.375 and 0.375 μg/mL) are achieved for [400]-plane γ-Al₂O₃ surfaces when tested against Gram-positive and -negative bacteria, respectively. Among the three H-NRs, the smallest diameter size and length, the largest surface area, and the active exposure [400] direction of γ-Al₂O₃ H-NRs could provide the highest microbial inactivation.

Metal Nanoparticles for Improving Bactericide Functionality of Usual Fibers

A wide variety of microbiological hazards stimulates a constant development of new protective materials against them. For that, the application of some nanomaterials seems to be very promising. Modification of usual fibers with different metal nanoparticles was successfully illustrated in the work. Tantal nanoparticles have shown the highest antibacterial potency within fibrous materials against both gram-positive (Bacillus subtilis) and gram-negative (Escherichia coli) bacteria. Besides, the effect of tantal nanoparticles towards luminescent Photobacterium phosphoreum cells estimating the general sample ecotoxicity was issued for the first time.

Acute toxicity evaluation of nanoparticles mixtures using luminescent bacteria

As the application of nanoparticles (NPs) and their release to the environment has increased, it is important to verify their toxicity, with a special emphasis on particle solubilization and the interaction of NP mixtures. In the current study, a model luminescent bacteria, Vibrio fischeri, was employed to test the acute toxicity of individual NPs and their binary mixtures, including metal NPs (ZnNPs, CuNPs) and metal oxide NPs (ZnONPs, CuONPs). The independent action model was used to reflect the synergistic, additive, or antagonistic interactions of binary mixtures of these NPs. The results showed that the median effective concentration (EC₅₀) inhibited the luminescence of V. fischeri were 20.5, 4.1, 11.6, and 118.7 mg L^-1 for ZnNPs, CuNPs, ZnONPs, and CuONPs, respectively, suggesting that the toxicity of these NPs to V. fischeri were as the following order: CuNPs > ZnONPs > ZnNPs > CuONPs. The combined effect of NPs were found to be antagonistic for CuNPs-ZnONPs and CuNPs-CuONPs, synergistic for CuONPs-ZnNPs, CuNPs-ZnNPs, and ZnONPs-CuONPs, and additive for ZnNPs-ZnONPs, revealing a complex pattern of possible interactions. The differences of dissolved metal ions partly accounted for the different combined toxicity of binary mixtures of NPs. The findings have important implications for better understanding the true environmental risk of NP mixtures.

Effects of iron oxide nanoparticles (Fe3O4) on life history and metabolism of the Neotropical cladoceran Ceriodaphnia silvestrii

Nanoparticles (NPs) production is increasing worldwide. These products are likely to end up in aquatic environments. However, few studies evaluated the chronic toxicity of iron-based NPs (Fe-NPs) to cladocerans and their potential ecotoxicological hazards. In this study we aimed to investigate the effects of iron oxide nanoparticles (Fe₃O₄-NPs) to Ceriodaphnia silvestrii Daday, 1902, assessing acute (48 h) and chronic toxicity (up to 14 d). Besides traditional endpoints (immobility and lethality), we also evaluated physiological responses (respiration rates) in a 48 h-exposure. No immobility was observed (EC₅₀ > 100 mg L^-1) after 48 h, whereas respiration rates at the highest concentration were 400% of that in control, indicating that this endpoint was more sensitive during acute toxicity. In chronic assays, Fe₃O₄-NPs affected body length (8.24% growth inhibition in 7 d-exposure) and number of eggs (7-d IC₁₀: 3.53, IC₂₀: 6.69 mg Fe L^-1) and neonates (7-d IC₁₀: 1.25, IC₂₀: 3.75 mg Fe L^-1). Based on species sensitivity distribution (SSD), C. silvestrii was a sensitive organism, suggesting Fe-NPs as a possible threat for this species. Our results also indicate that the NPs caused a physical barrier, impairing food absorption, since we observed NPs agglomerations into cladocerans' gut. We demonstrate that Fe₃O₄-NPs affects C. silvestrii metabolism and reproduction and our results support the use of sublethal endpoints to assess environmental safety. The release of these NPs into freshwater environments should be carefully evaluated, since disturbances on cladoceran population dynamics could cause strong impacts on the entire food web structure and ultimately on ecosystem functioning.

Molecular Mechanisms of Bacterial Resistance to Metal and Metal Oxide Nanoparticles

The increase in bacterial resistance to one or several antibiotics has become a global health problem. Recently, nanomaterials have become a tool against multidrug-resistant bacteria. The metal and metal oxide nanoparticles are one of the most studied nanomaterials against multidrug-resistant bacteria. Several in vitro studies report that metal nanoparticles have antimicrobial properties against a broad spectrum of bacterial species. However, until recently, the bacterial resistance mechanisms to the bactericidal action of the nanoparticles had not been investigated. Some of the recently reported resistance mechanisms include electrostatic repulsion, ion efflux pumps, expression of extracellular matrices, and the adaptation of biofilms and mutations. The objective of this review is to summarize the recent findings regarding the mechanisms used by bacteria to counteract the antimicrobial effects of nanoparticles.

Combined Toxicity of Nitro-Substituted Benzenes and Zinc to Photobacterium Phosphoreum: Evaluation and QSAR Analysis

The single toxicity (IC₅₀) of zinc (Zn) and 11 nitro-substituted benzenes to Photobacterium phosphoreum were determined, respectively. On basis of single toxicity, the joint toxicity of binary mixtures of Zn and 11 nitro-substituted benzenes at different Zn concentrations of 0.2 IC₅₀, 0.5 IC₅₀, and 0.8 IC₅₀ were measured. The joint toxicity was evaluated by toxic unit (TU) and additive index (AI) methods. The results indicated that the joint toxicity was not only depending on the Zn concentrations but also on the substituted groups of nitro-substituted benzenes. The quantitative structure-activity relation (QSAR) equations were developed and the results showed that the toxicity of nitro-substituted benzenes has different joint effect at the different Zn concentrations. At the Zn concentration of 0.2 IC₅₀, the binary joint effects were mainly antagonism and the joint toxicity was negatively related to descriptors called VE2_B(p) and TIC3. At the Zn concentration of 0.5 IC₅₀ and 0.8 IC₅₀, the binary joint effects were mainly antagonism and simple addition, and the joint toxicity was related to the same descriptor Eig06_ AEA(dm). It indicated that the joint toxic actions were similar when combined at the medium and high concentrations of Zn.

Impacts of molybdenum-, nickel-, and lithium- oxide nanomaterials on soil activity and microbial community structure

The nano forms of the metals molybdenum oxide (MoO₃), nickel oxide (NiO) and lithium oxide (Li₂O) are finding wide application in advanced technologies including batteries and fuel cells. We evaluated soil responses to nanoMoO₃, nanoNiO, and nanoLi₂O as some environmental release of the materials, either directly or following the land application of biosolids, is expected. Using Drummer soil (Fine-silty, mixed, superactive, mesic Typic Endoaquolls), we evaluated the impacts of the three nanometals on soil gas (N₂O, CH₄, and CO₂) emissions, enzyme activities (β-glucosidase and urease), and microbial community structure (bacterial, archaeal, and eukaryal) in a 60 day microcosms incubation. Soil treated with nanoLi₂O at 474 μg Li/g soil, released 3.45 times more CO₂ with respect to the control. Additionally, β-glucosidase activity was decreased while urease activity increased following nanoLi₂O treatment. While no clear patterns were observed for gas emissions in soils exposed to nanoMoO₃ and nanoNiO, we observed a temporary suppression of β-glucosidase activity in soil treated with either metal. All three domains of microbial community were affected by increasing metal concentrations. This is the first evaluation of soil responses to nanoMoO₃, nanoNiO, or nanoLi₂O.

Single and mixture toxicity of strobilurin and SDHI fungicides to Xenopus tropicalis embryos

The decline in amphibian populations is a critical threat to global biodiversity, and pesticide pollution is considered as one of the major factors. Although effects of single pesticides on amphibians have been documented, toxicological interactions prevailing in mixtures of pesticides have not been well elucidated. Strobilurin and succinate dehydrogenase inhibitor (SDHI) fungicides are new types of commonly used pesticides. In this study, effects of three strobilurins (pyraclostrobin, trifloxystrobin and azoxystrobin), two SDHIs (isopyrazam and bixafen), and their mixtures on X. tropicalis embryos were fully investigated. Results showed that exposure to individual fungicides induced lethal and teratogenetic effects; and malformed embryos displayed similar phenotypes including microcephaly, hypopigmentation, somite segmentation and narrow fin. Exposure to two strobilurins or two SDHIs at equitoxic concentrations caused additive or synergetic effects at environmentally relevant concentrations. TU for mixtures of isopyrazam and bixafen was 0.53 and 0.30 for lethal and teratogenic toxicity, respectively. Finally, binary mixtures of strobilurins and SDHIs also exhibited additive or synergetic effects on amphibian embryos. Overall, these results reveal that the mixtures of multiple fungicides caused a higher incidence of lethality and teratogenicity of amphibian embryos, compared to a single fungicide at the corresponding doses. Our findings provide important data about the ecotoxicology of agricultural fungicides on non-target organisms, which is useful for guiding management practices for pesticides.

Antagonistic effect of nano-ZnO and cetyltrimethyl ammonium chloride on the growth of Chlorella vulgaris: Dissolution and accumulation of nano-ZnO

The interaction of nanoparticles with coexisting chemicals affects the fate and transport of nanoparticles, as well as their combined effects on aquatic organisms. Here, we evaluated the joint effect of ZnO nanoparticle (nano-ZnO) and cetyltrimethyl ammonium chloride (CTAC) on the growth of Chlorella vulgaris and explored the possible mechanism. Results showed that an antagonistic effect of nano-ZnO and CTAC (0.1, 0.2 and 0.3 mg L^-1) was found because CTAC stop nano-ZnO being broken down into solution zinc ions (Zn²⁺). In the presence of CTAC, the zinc (including nano-ZnO and released Zn²⁺) showed a higher adsorption on bound extracellular polymeric substances (B-EPS) but lower accumulation in the algal cells. Moreover, we directly demonstrated that nano-ZnO was adsorbed on the algal B-EPS and entered into the algal cells by transmission electron microscope coupled with energy dispersive X-ray (TEM-EDX). Hence, these results suggested that the combined system of nano-ZnO and CTAC exhibited an antagonistic effect due to the inhibition of CTAC on dissolution of nano-ZnO and accumulation of the zinc in the algal cells.

How the toxicity of nanomaterials towards different species could be simultaneously evaluated: a novel multi-nano-read-across approach

Application of predictive modeling approaches can solve the problem of missing data. Numerous studies have investigated the effects of missing values on qualitative or quantitative modeling, but only a few studies have discussed it for the case of applications in nanotechnology-related data. The present study is aimed at the development of a multi-nano-read-across modeling technique that helps in predicting the toxicity of different species such as bacteria, algae, protozoa, and mammalian cell lines. Herein, the experimental toxicity of 184 metal and silica oxide (30 unique chemical types) nanoparticles from 15 datasets is analyzed. A hybrid quantitative multi-nano-read-across approach that combines interspecies correlation analysis and self-organizing map analysis is developed. In the first step, hidden patterns of toxicity among nanoparticles are identified using a combination of methods. Subsequently, the developed model based on categorization of the toxicity of the metal oxide nanoparticle outcomes is evaluated via the combination of supervised and unsupervised machine learning techniques to determine the underlying factors responsible for the toxicity.

Transformation and bioavailability of metal oxide nanoparticles in aquatic and terrestrial environments. A review

Metal oxide nanoparticles (MeO-NPs) are among the most consumed NPs and also have wide applications in various areas which increased their release into the environmental system. Aquatic (water and sediments) and terrestrial compartments are predicted to be the destination of the released MeO-NPs. In these compartments, the particles are subjected to various dynamic processes such as physical, chemical and biological processes, and undergo transformations which drive them away from their pristine state. These transformation pathways can have strong implications for the fate, transport, persistence, bioavailability and toxic-effects of the NPs. In this critical review, we provide the state-of-the-knowledge on the transformation processes and bioavailability of MeO-NPs in the environment, which is the topic of interest to researchers. We also recommend future research directions in the area which will support future risk assessments by enhancing our knowledge of the transformation and bioavailability of MeO-NPs.

Environmental dynamics of metal oxide nanoparticles in heterogeneous systems: A review

Metal oxide nanoparticles (MNPs) have been used for many purposes including water treatment, health, cosmetics, electronics, food packaging, and even food products. As their applications continue to expand, concerns have been mounting about the environmental fate and potential health risks of the nanoparticles in the environment. Based on the latest information, this review provides an overview of the factors that affect the fate, transformation and toxicity of MNPs. Emphasis is placed on the effects of various aquatic contaminants under various environmental conditions on the transformation of metal oxides and their transport kinetics - both in homogeneous and heterogeneous systems - and the effects of contaminants on the toxicity of MNPs. The presence of existing contaminants decreases bioavailability through hetero-aggregation, sorption, and/or complexation upon an interaction with MNPs. Contaminants also influence the fate and transport of MNPs and exhibit their synergistic toxic effects that contribute to the extent of the toxicity. This review will help regulators, engineers, and scientists in this field to understand the latest development on MNPs, their interactions with aquatic contaminants as well as the environmental dynamics of their fate and transformation. The knowledge gap and future research needs are also identified, and the challenges in assessing the environmental fate and transport of nanoparticles in heterogeneous systems are discussed.

Joint toxicity prediction of nanoparticles and ionic counterparts: Simulating toxicity under a fate scenario

The joint effects of NPs with other chemicals is not fully yet understood along with the joint effects of the particulate and dissolved forms/fractions. The predictability of joint effects is of great importance for environmental risk assessment. Therefore this study aimed at inferring on the predictability of NPs binary mixture toxicity based on their ionic counterparts' mixtures, and evaluating if the joint toxicity of two forms of the same element (NP and ion) acts as dilution of each other. Effects of individual and mixtures of ZnO and Ag NPs and their respective salts (AgNO₃ and ZnCl₂) were studied in immobilization and feeding tests using Daphnia magna. NPs mixture toxicity patterns did not mirror their ionic counterparts' mixture toxicity responses and therefore their prediction should not rely on the available knowledge for regular chemicals. Regarding mixtures from the same element with different forms (NP and ions), both Zn and Ag mixtures showed a deviation from additivity, relying on the interaction between NP and ions. A synergistic effect was depicted when the concentrations of Ag ions increased, while antagonism was observed with AgNP increase in suspension. This is an expected pattern in long term studies due to dissolution, relating fate and toxicity.

Eco-toxicological bioassay of atmospheric fine particulate matter (PM2.5) with Photobacterium Phosphoreum T3

A bioluminescent bacterium, Photobacterium phosphoreum T3 (PPT3), was used as a bio-indicator for the atmospheric fine particulate matter (PM2.5) to determine the eco-toxicity of PM2.5. The PM2.5 contains toxic chemicals, which reduce light output. The PM2.5 samples were collected in the period from March 2014 to January 2015 in Nanjing and analyzed for the chemical composition versus their eco-toxicity. The eco-toxicological responses of each toxicant were detected in PM2.5 samples with PPT3. The dose-response curves obtained were verified using the Weibull fitting function. According to the measured EC50 values (EC50, the concentration of a toxicant that inhibits 50% of the bioluminescence), the toxicity sequence was: B[a]P>hexa-PCB>tetra-PCB>tri-PCB>Pb(2+)>DEHP>Cu(2+)>DBP>BDE209>Zn(2+)>DMP>DEP, where B[a]P is benzo(a)pyrene, PCB is polychlorinated biphenyl, DEHP is diethylhexyl phthalate, DBP is dibutyl phthalate, BDE209 is decabromodiphenyl ether, DMP is dimethyl phthalate, and DEP is diethyl phthalate. All the PM2.5 samples analyzed proved to be weak toxic for PPT3. The toxicity of PM2.5 was assessed by the dose-addition of organic species and heavy metallic elements existing in PM2.5 with PPT3. The bioluminescence test showed that the metals and organics detected in PM2.5 promoted PM2.5 toxicity. The total detectable organics (denoted by ΣOrs) exhibited slightly higher toxicity than the total metals (denoted by ΣMs). In contrast, the sum of water-soluble ions (denoted by ΣIons) was beneficial to PPT3. The PM2.5 toxicity increased as the PM2.5 trapped more organics or metallic elements from the industrial or densely populated urban areas, where the PM2.5 had a high inhibition rate of bioluminescence for PPT3 in contrast to the residential PM2.5 samples, where the minimum inhibition rate was observed. The toxicity of PM2.5 samples varied with the mass concentrations, chemical constituents, and sampling locations. The chemicals in PM2.5, especially organic species and metallic elements, affected its eco-toxicity. These data provided good understanding of the atmospheric PM2.5 pollution in the large portion of the East China.

Trace amounts of Cu²⁺ ions influence ROS production and cytotoxicity of ZnO quantum dots

3-Aminopropyltrimethoxysilane (APTMS) was used as ligand to prepare ZnO@APTMS, Cu(2+)-doped ZnO (ZnO:Cu@APTMS) and ZnO quantum dots (QDs) with chemisorbed Cu(2+) ions at their surface (ZnO@APTMS/Cu). The dots have a diameter of ca. 5 nm and their crystalline and phase purities and composition were established by X-ray diffraction, transmission electron microscopy, UV-visible and fluorescence spectroscopies and by X-ray photoelectron spectroscopy. The effect of Cu(2+) location on the ability of the QDs to generate reactive oxygen species (ROS) under light irradiation was investigated. Results obtained demonstrate that all dots are able to produce ROS (OH, O2(-), H2O2 and (1)O2) and that ZnO@APTMS/Cu QDs generate more OH and O2(-) radicals and H2O2 than ZnO@APTMS and ZnO:Cu@APTMS QDs probably via mechanisms associating photo-induced charge carriers and Fenton reactions. In cytotoxicity experiments conducted in the dark or under light exposure, ZnO@APTMS/Cu QDs appeared slightly more deleterious to Escherichia coli cells than the two other QDs, therefore pointing out the importance of the presence of Cu(2+) ions at the periphery of the nanocrystals. On the other hand, with the lack of photo-induced toxicity, it can be inferred that ROS production cannot explain the cytotoxicity associated to the QDs. Our study demonstrates that both the production of ROS from ZnO QDs and their toxicity may be enhanced by chemisorbed Cu(2+) ions, which could be useful for medical or photocatalytic applications.

Acute toxicity of benzophenone-type UV filters for Photobacterium phosphoreum and Daphnia magna: QSAR analysis, interspecies relationship and integrated assessment

The hazardous potential of benzophenone (BP)-type UV filters is becoming an issue of great concern due to the wide application of these compounds in many personal care products. In the present study, the toxicities of BPs to Photobacterium phosphoreum and Daphnia magna were determined. Next, density functional theory (DFT) and comparative molecular field analysis (CoMFA) descriptors were used to obtain more detailed insight into the structure - activity relationships and to preliminarily discuss the toxicity mechanism. Additionally, the sensitivities of the two organisms to BPs and the interspecies toxicity relationship were compared. Moreover, an approach for providing a global index of the environmental risk of BPs to aquatic organisms is proposed. The results demonstrated that the mechanism underlying the toxicity of BPs to P. phosphoreum is primarily related to their electronic properties, and the mechanism of toxicity to D. magna is hydrophobicity. Additionally, D. magna was more sensitive than P. phosphoreum to most of the BPs, with the exceptions of the polyhydric BPs. Moreover, comparisons with published data revealed a high interspecies correlation coefficient among the experimental toxicity values for D. magna and Dugesia japonica. Furthermore, hydrophobicity was also found to be the most important descriptor of integrated toxicity. This investigation will provide insight into the toxicity mechanisms and useful information for assessing the potential ecological risk of BP-type UV filters.