Biotechnological potential of Synechocystis salina co-cultures with selected microalgae and cyanobacteria: Nutrients removal, biomass and lipid production

Nuclear mutagenesis and adaptive evolution improved photoautotrophic growth of Euglena gracilis with flue-gas CO2 fixation

To effectively improve biomass growth and flue-gas CO2 fixation of microalgae, acid-tolerant Euglena gracilis was modified with cobalt-60 γ-ray irradiation and polyethylene glycol (PEG) adaptive screening to obtain the mutant strain M800. The biomass dry weight and maximum CO2 fixation rate of M800 were both 1.47 times higher than that of wild strain, which was attributed to a substantial increase in key carbon fixation enzyme RuBisCO activity and photosynthetic pigment content. The high charge separation quantum efficiency in PSII reaction center, efficient light utilization and energy regulation that favors light conversion, were the underlying drivers of efficient photosynthetic carbon fixation in M800. M800 had stronger antioxidant capacity in sufficient high-carbon environment, alleviating lipid peroxidation damage. After adding 1 mM PEG, biomass dry weight of M800 reached 2.31 g/L, which was 79.1 % higher than that of wild strain. Cell proliferation of M800 was promoted, the apoptosis and necrosis rates decreased.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

Nutrient removal and lipid production by the co-cultivation of Chlorella vulgaris and Scenedesmus dimorphus in landfill leachate diluted with recycled harvesting water

Applying microalgae for landfill leachate (LL) treatment is promising. However, LL usually needs to be diluted with much fresh water, aggravating water shortage. In this study, mono- and co-culturing microalgae (Chlorella vulgaris and Scenedesmus dimorphus) were used to treat LL diluted with recycled harvesting water, to investigate nutrient removal and lipid production. The results showed that microalgae in co-culture treatment had more biomass and stronger superoxide dismutase activity, which might be related to humic acids contained in recycled harvesting water, according to dissolved organic matters (DOMs) analysis. In addition, the lipid content and yield of co-cultured microalgae reached 27.60 % and 66.87 mg·L^-1, respectively, higher than those of mono-culture, proving the potential of co-culture for the improvement of lipid production. This study provided a freshwater-saving dilution method for LL treatment with recycled harvesting water as well as a strategy for the increase of biomass and lipid accumulation by microalgae co-cultivation.

Review on rewiring of microalgal strategies for the heavy metal remediation - A metal specific logistics and tactics

Phycoremediation of heavy metals are gaining much attention and becoming an emerging practice for the metal removal in diverse environmental matrices. Still, the physicochemical state of metal polluted sites is often found to be complex and haphazard in nature due to the irregular discharge of wastes, that leads to the lack of conjecture on the application of microalgae for the metal bioremediation. Besides, the foresaid issues might be eventually ended up with futile effect to the polluted site. Therefore, this review is mainly focusing on interpretative assessment on pre-existing microalgal strategies and their merits and demerits for selected metal removal by microalgae through various process such as natural attenuation, nutritional amendment, chemical pretreatment, metal specific modification, immobilization and amalgamation, customization of genetic elements and integrative remediation approaches. Thus, this review provides the ideal knowledge for choosing an efficient metal remediation tactics based on the state of polluted environment. Also, this in-depth description would provide the speculative knowledge of counteractive action required for pass-over the barriers and obstacles during implementation. In addition, the most common metal removal mechanism of microalgae by adsorption was comparatively investigated with different metals through the principal component analysis by grouping various factor such as pH, temperature, initial metal concentration, adsorption capacity, removal efficiency, contact time in different microalgae. Conclusively, the suitable strategies for different heavy metals removal and addressing the complications along with their solution is comprehensively deliberated for metal removal mechanism in microalgae.

Nitrogen and phosphate removal from dairy processing side-streams by monocultures or consortium of microalgae

Acid-casein production generates waste streams that are rich in nitrogen (in the form of protein and nitrate) and phosphate. This makes this type of waste very difficult to treat using conventional techniques resulting in a high amount of operating cost and costly investment. In this research, the application of single culture or consortium of microalgae for uptake of nitrogen and phosphate in the wastewater of an acid-casein factory was investigated. The waste was a 1:1 mixture of nanofiltered whey permeate and dairy processing wastewater. Monocultures of Chlorella vulgaris, Tetradesmus obloquus, Nonnochlropsis ocenica and a consortium of the three microalgae were analyzed. The results showed that the consortium exhibited more efficient nitrogen and phosphate removal compared to the individual species. The consortium was able to rapidly hydrolyse exogenous protein present in the waste medium, removing 88% of protein and breaking down complex protein molecules into simpler compounds (such as nitrate) for assimilation into the biomass. In the first fourteen days of cultivation, the rate of nitrate assimilation by the consortium biomass was lower than that of nitrate formation from protein degradation, leading to a net increase in nitrate concentration in the medium. As protein source was depleted and biomass concentration increased, however, the rate of nitrate assimilation began to exceed that of nitrate formation allowing for net removal of nitrate. The microalgae consortium was shown to successfully bioremediate all nitrates by day 21. It was indicated that Chlorella and Nannochloropsis species were responsible for nitrogen removal in monocultures. Phosphate, on the other hand, was efficiently removed by Tetradesmus. The results indicated that a consortium cultivation of three species of microalgae led to effective elimination of both nitrogen and phosphate. Combined flow-cytometry and microscopy analyses revealed that Chlorella overtook Tetradesmus and Nannochloropsis to emerge as the dominant population in the consortium by the end of the cultivation cycle. It can be concluded that the application of microalgae consortium for simultaneous recovery of nitrogen and phosphate is a promising approach for treating acid-casein wastewater.

Effects of Temperature, pH, and NaCl Concentration on Biomass and Bioactive Compound Production by Synechocystis salina

Synechocystis salina is a cyanobacterium that has biotechnological potential thanks to its ability to synthesize several bioactive compounds of interest. Therefore, this study aimed to find optimal conditions, in terms of temperature (15-25 °C), pH (6.5-9.5), and NaCl concentration (10-40 g·L^-1), using as objective functions the productivities of biomass, total carotenoids, total PBPs, phycocyanin (PC), allophycocyanin (APC), phycoerythrin (PE), and antioxidants (AOXs) capacity of Synechocystis salina (S. salina) strain LEGE 06155, based in factorial design resorting to Box-Behnken. The model predicted higher biomass productivities under a temperature of 25 °C, a pH of 7.5, and low NaCl concentrations (10 g·L^-1). Maximum productivities in terms of bioactive compounds were attained at lower NaCl concentrations (10 g·L^-1) (except for PE), with the best temperature and pH in terms of carotenoids and total and individual PBPs ranging from 23-25 °C to 7.5-9.5, respectively. PE was the only pigment for which the best productivity was reached at a lower temperature (15 °C) and pH (6.5) and a higher concentration of NaCl (≈25 g·L^-1). AOX productivities, determined in both ethanolic and aqueous extracts, were positively influenced by lower temperatures (15-19 °C) and higher salinities (≈15-25 g·L^-1). However, ethanolic AOXs were better recovered at a higher pH (pH ≈ 9.5), while aqueous AOXs were favored by a pH of 8. The model showed that biomass production can be enhanced by 175% (compared to non-optimized conditions), total carotenoids by 91%, PC by 13%, APC by 50%, PE by 130%, and total PBPs by 39%; for AOX productivities, only water extracts exhibited a (marginal) improvement of 1.4%. This study provided insightful information for the eventual upgrading of Synechocystis salina biomass in the biotechnological market.

Recent advances on microalgae cultivation for simultaneous biomass production and removal of wastewater pollutants to achieve circular economy

Microalgae are known for containing high value compounds and its significant role in sequestering carbon dioxide. This review mainly focuses on the emerging microalgae cultivation technologies such as nanomaterials technology that can improve light distribution during microalgae cultivation, attached cultivation and co-cultivation approaches that can improve growth and proliferation of algal cells, biomass yield and lipid accumulation in microalgal. This review includes a comprehensive discussion on the use of microbubbles technology to enhance aerated bubble capacity in photobioreactor to improve microalgal growth. This is followed by discussion on the role of microalgae as phycoremediation agent in removal of contaminants from wastewater, leading to better water quality and high productivity of shellfish. The review also includes techno-economic assessment of microalgae biorefinery technology, which is useful for scaling up the microalgal biofuel production system or integrated microalgae-shellfish cultivation system to support circular economy.

Factorial Optimization of Ultrasound-Assisted Extraction of Phycocyanin from Synechocystis salina: Towards a Biorefinery Approach

PC is a bioactive and colorant compound widely sought in the food, nutraceutical and cosmetic industries, and one of the most important pigments produced by Synechocystis salina. However, the general extraction process is usually time-consuming and expensive, with low extraction yields—thus compromising a feasible and sustainable bioprocess. Hence, new extraction technologies (e.g., ultrasound assisted-extraction or UAE) emerged in the latest years may serve as a key step to make the overall bioprocess more competitive. Therefore, this study aimed at optimizing the yields of phycocyanin (PC) rich-extracts of S. salina by resorting to UAE; in attempts to explore this process in a more economically feasible way; valorization of the remaining cyanobacterial biomass, via extraction of other bioactive pigments and antioxidants, was tackled within a biorefinery perspective. A two-stage extraction (using ethanol and water) was thus performed (because it favors PC extraction); other bioactive pigments, including chlorophyll a (chl a), carotenoids, and other phycobiliproteins (PBPs), but also antioxidant (AOX) capacity and extraction yields were also evaluated for their optimum UAE yields. A factorial design based on Box–Behnken model was developed; and the influence of such extraction parameters as biomass to solvent ratio (B/S ratio = 1.5–8.5 mg·mL⁻¹), duty cycle (DT = 40–100%), and percentage of amplitude (A = 40–100%) were evaluated. The model predicted higher PC yields with high B/S ratio = 6 mg·mL⁻¹, lower DT = 80% and an A = 100%. Classical extraction was compared with UAE under the optimum conditions found; the latter improved PC yields by 12.5% and 47.8%, when compared to freeze-thawing extraction, and bead beater homogenization-based extraction, respectively. UAE successive extractions allowed to valorize other important bioactive compounds than PC, by reusing biomass, supporting a favorable contribution to the economic feasibility of the S. salina-based process towards a biorefinery approach.

Light Modulation for Bioactive Pigment Production in Synechocystis salina

Cyanobacteria are microorganisms that are well-adapted to sudden changes in their environment, namely to light conditions. This has allowed them to develop mechanisms for photoprotection, which encompass alteration in pigment composition. Therefore, light modulation appears to be a suitable strategy to enhance the synthesis of specific pigments (e.g., phycocyanin) with commercial interest, in addition to conveying a more fundamental perspective on the mechanisms of acclimatization of cyanobacterium species. In this study, Synechocystis salina was accordingly cultivated in two light phase stages: (i) white LED, and (ii) shift to distinct light treatments, including white, green, and red LEDs. The type of LED lighting was combined with two intensities (50 and 150 µmol_photons·m⁻²·s⁻¹). The effects on biomass production, photosynthetic efficiency, chlorophyll a (chl a) content, total carotenoids (and profile thereof), and phycobiliproteins (including phycocyanin, allophycocyanin, and phycoerythrin) were assessed. White light (under high intensity) led to higher biomass production, growth, and productivity; this is consistent with higher photosynthetic efficiency. However, chl a underwent a deeper impact under green light (high intensity); total carotenoids were influenced by white light (high intensity); whilst red treatment had a higher effect upon total and individual phycobiliproteins. Enhanced PC productivities were found under modulation with red light (low intensities), and could be achieved 7 days earlier than in white LED (over 22 days); this finding is quite interesting from a sustainability and economic point of view. Light modulation accordingly appears to be a useful tool for supplementary studies pertaining to optimization of pigment production with biotechnological interest.

A review on co-culturing of microalgae: A greener strategy towards sustainable biofuels production

There is a growing global recognition that microalgae-based biofuel are environment-friendly and economically feasible options because they incur several advantages over traditional fossil fuels. Also, the microalgae can be manipulated for extraction of value-added compounds such as lipids (triacylglycerols), carbohydrates, polyunsaturated fatty acids, proteins, pigments, antioxidants, various antimicrobial compounds, etc. Recently, there is an increasing focus on the co-cultivation practices of microalgae with other microorganisms to enhance biomass and lipid productivity. In a co-cultivation strategy, microalgae grow symbiotically with other heterotrophic microbes such as bacteria, yeast, fungi, and other algae/microalgae. They exchange nutrients and metabolites; this helps to increase the productivity, therefore facilitating the commercialization of microalgal-based fuel. Co-cultivation also facilitates biomass harvesting and waste valorization, thereby help to build an algal biorefinery platform for bioenergy production along with multivariate high value bioproducts and simultaneous waste bioremediation. This article comprehensively reviews various microalgae cultivation practices utilizing co-culture approaches with other algae, fungi, bacteria, and yeast. The review mainly focuses on the impact of several binary culture strategies on biomass and lipid yield. The advantages and challenges associated with the procedure along with their respective cultivation modes have also been presented and discussed in detail.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Bioenergy from dairy manure: technologies, challenges and opportunities

Dairy manure (DM) is a kind of cheap cellulosic biomass resource which includes lignocellulose and mineral nutrients. Random stacks not only leads damage to the environment, but also results in waste of natural resources. The traditional ways to use DM include returning it to the soil or acting as a fertilizer, which could reduce environmental pollution to some extent. However, the resource utilization rate is not high and socio-economic performance is not utilized. To expand the application of DM, more and more attention has been paid to explore its potential as bioenergy or bio-chemicals production. This article presented a comprehensive review of different types of bioenergy production from DM and provided a general overview for bioenergy production. Importantly, this paper discussed potentials of DM as candidate feedstocks not only for biogas, bioethanol, biohydrogen, microbial fuel cell, lactic acid, and fumaric acid production by microbial technology, but also for bio-oil and biochar production through apyrolysis process. Additionally, the use of manure for replacing freshwater or nutrients for algae cultivation and cellulase production were also discussed. Overall, DM could be a novel suitable material for future biorefinery. Importantly, considerable efforts and further extensive research on overcoming technical bottlenecks like pretreatment, the effective release of fermentable sugars, the absence of robust organisms for fermentation, energy balance, and life cycle assessment should be needed to develop a comprehensive biorefinery model.

Enhancement of Lipid Productivity and Self-flocculation by Cocultivating Monoraphidium sp. FXY-10 and Heveochlorella sp. Yu Under Mixotrophic Mode

To maintain high microalgae lipid productivity and flocculation efficiency simultaneously and reduce the production cost of microalgae lipids, Monoraphidium sp. FXY-10 with high lipid-producing capacity and Heveochlorella sp. Yu with strong self-flocculation ability were cocultivated and studied. Cocultivated microalgae lipid productivity and flocculation efficiency were increased to 203.8 mg L-1 day-1 and 70.55%, respectively, which is potentially related to the excessive competitive depletion of nitrogen sources and the upregulation of correlative key genes in lipid anabolic metabolism. Under cocultivation conditions, microalgae cells could enter the stationary phase 2 days earlier than that under monocultivation conditions, thus reducing the culture time. Relative expression of the accD, ME, and rbcL genes was upregulated to varying degrees, and the enzyme activities of ACCase, ME, and RuBisCO were also significantly increased compared with those in monocultivation. Moreover, fatty acid composition showed that microalgae lipids in cocultivation exhibited potential as a feedstock for biodiesel.

Lipid Production Capacity of a Newly Characterized Cyanobacterial Strain Synechocystissp. MH01: A Comparative Performance Evaluation of Cyanobacterial Lipid-Based Biodiesel

Background:

Cyanobacteria have been the focus of extensive researches because of their high potential for the development of new generations of useful natural compounds with vast applications. For the entire last ten years, a lot of attention has been dedicated to the cyanobacterial lipids as a main source of valuable materials for clean energy production.

Objectives:

As there is a direct relationship between biofuel properties and compositional characteristics of fatty acids, a selected lipid-producing cyanobacterial strain was examined and analyzed in terms of fatty acid composition. The biodiesel quality parameters were carefully examined as well.

Materials and Methods:

A cyanobacterial strain was isolated from waterfalls in the northern part of Iran and identified as Synechocystis sp. MH01. The fatty acids profile of the selected strain, as tested in various culture conditions, was analyzed by gas chromatography (GC) and compared with control subjects to further validating the biodiesel quality parameters.

Results:

The autotrophic cultivation of Synechocystissp. MH01 resulted in biomass and lipid productivity of 109 mg.L^-1 day^-1 and 22.89 mg.L^-1 day^-1, respectively. The mixotrophic cultivation of MH01 strain in sucrose-containing medium led to an approximately 1.8 and 1.22 fold increase in biomass and lipid productivity compared with the autotrophic condition. The addition of glycine to BG11 medium caused up to ~1.3 and ~1.18 fold increase in biomass and lipid productivity compared with control subjects. The analysis of qualitative parameters of the biodiesel, as derived from the lipids, indicated that Synechocystis sp. MH01 has a high ability for lipid production under optimal culture conditions

Conclusions:

It seems feasible to evolve the Synechocystissp. MH01 further particularly for more lipid production as a promising primary raw material for biofuel production through fine-tuning of medium composition

Lignocellulosic Biomass as a Substrate for Oleaginous Microorganisms: A Review

Microorganisms capable of accumulating lipids in high percentages, known as oleaginous microorganisms, have been widely studied as an alternative for producing oleochemicals and biofuels. Microbial lipid, so-called Single Cell Oil (SCO), production depends on several growth parameters, including the nature of the carbon substrate, which must be efficiently taken up and converted into storage lipid. On the other hand, substrates considered for large scale applications must be abundant and of low acquisition cost. Among others, lignocellulosic biomass is a promising renewable substrate containing high percentages of assimilable sugars (hexoses and pentoses). However, it is also highly recalcitrant, and therefore it requires specific pretreatments in order to release its assimilable components. The main drawback of lignocellulose pretreatment is the generation of several by-products that can inhibit the microbial metabolism. In this review, we discuss the main aspects related to the cultivation of oleaginous microorganisms using lignocellulosic biomass as substrate, hoping to contribute to the development of a sustainable process for SCO production in the near future.

Evaluating the effect of hydraulic retention time on fouling development and biomass characteristics in an algal membrane photobioreactor treating a secondary wastewater effluent

Coupling algal biomass growth to wastewater treatment is a promising alternative for the simultaneous removal and recovery of nutrients. This study aims to evaluate the effects of the Hydraulic Retention Time (HRT) on the fouling behavior and biomass characteristics of C. Vulgaris in a Membrane Photobioreactor (MPBR), fed with a secondary synthetic wastewater effluent. The changes in the algal cell characteristics and in their metabolic products were assessed at three different HRTs (12 h, 24 h and 36 h). Experimental results showed that higher loading rates led to a broader Particle Size Distribution (PSD) resulting from looser and less stable algal flocs. In contrast, bigger and homogeneously distributed particles observed at lower loading rates, led to a porous layer with lower fouling rates and organic removal. The presence of smaller particles and dissolved organics resulted in a more compact and less porous layer that increased the removal of small-MW organics.

Removal of pollutants from biogas slurry and CO2 capture in biogas by microalgae-based technology: a systematic review

Recent research interest has focused on microalgae cultivation for biogas slurry purification and biogas upgrading due to the requirement of high efficiency for nutrient uptake and CO₂ capture, with economic feasibility and environmental benefits. Numerous studies have suggested that biogas slurry purification and biogas upgrading can occur simultaneously via microalgae-based technology. However, there is no comprehensive review on this technology with respect to the nutrient removal from biogas slurry and biogas upgrading. This article summarizes microalgal cultivation with biogas slurry and biogas from anaerobic digestion. The parameters, techniques, and modes of microalgae cultivation have been discussed in detail to achieve high efficiency in biogas slurry purification and biogas upgrading. In addition, the evaluation of energy efficiency and safety has also been explored. Compared with mono-cultivation of microalgae and co-cultivation of microalgae and bacteria, microalgae-fungi symbiosis has demonstrated greater development prospect and higher energy efficiency and the energy consumption for pollutants and CO₂ removal were 14.2-39.0% · USD^-1 and 19.9-23.3% · USD^-1, respectively. Further, a sustainable recycling scheme is proposed for the purification of biogas slurry from anaerobic digestion process and biogas upgrading via microalgae-based technology.

Engineering salt tolerance of photosynthetic cyanobacteria for seawater utilization

Photosynthetic cyanobacteria are capable of utilizing sunlight and CO₂ as sole energy and carbon sources, respectively. With genetically modified cyanobacteria being used as a promising chassis to produce various biofuels and chemicals in recent years, future large-scale cultivation of cyanobacteria would have to be performed in seawater, since freshwater supplies of the earth are very limiting. However, high concentration of salt is known to inhibit the growth of cyanobacteria. This review aims at comparing the mechanisms that different cyanobacteria respond to salt stress, and then summarizing various strategies of developing salt-tolerant cyanobacteria for seawater cultivation, including the utilization of halotolerant cyanobacteria and the engineering of salt-tolerant freshwater cyanobacteria. In addition, the challenges and potential strategies related to further improving salt tolerance in cyanobacteria are also discussed.

Technologies for biological removal and recovery of nitrogen from wastewater

Water contamination is a growing environmental issue. Several harmful effects on human health and the environment are attributed to nitrogen contamination of water sources. Consequently, many countries have strict regulations on nitrogen compound concentrations in wastewater effluents. Wastewater treatment is carried out using energy- and cost-intensive biological processes, which convert nitrogen compounds into innocuous dinitrogen gas. On the other hand, nitrogen is also an essential nutrient. Artificial fertilizers are produced by fixing dinitrogen gas from the atmosphere, in an energy-intensive chemical process. Ideally, we should be able to spend less energy and chemicals to remove nitrogen from wastewater and instead recover a fraction of it for use in fertilizers and similar applications. In this review, we present an overview of various technologies of biological nitrogen removal including nitrification, denitrification, anaerobic ammonium oxidation (anammox), as well as bioelectrochemical systems and microalgal growth for nitrogen recovery. We highlighted the nitrogen removal efficiency of these systems at different temperatures and operating conditions. The advantages, practical challenges, and potential for nitrogen recovery of different treatment methods are discussed.

Biotreatment of landfill leachate by microalgae-bacteria consortium in sequencing batch mode and product utilization

Biotreatment of leachate by microalgae-bacteria in a sequencing batch mode using a photobioreactor was investigated. The microalgae-bacteria biomass initial concentration was maintained at 3:1 ratio. The increase in the initial concentration of the biomass in the 2^nd batch favoured biomass growth, doubling biomass productivity, compared to the 1^st batch. In both batches, N-NH₄ was completely removed from the leachate. In the 2^nd batch, the nitrate, COD and phenol removal efficiencies were above 90%. The relative toxicity reduced from 57.32 to 1.12% at the end of 2^nd batch. The fatty acids content (C16-18) varied from 85.47 to 87.65% for the 1^st batch and 86.72 to 87.69% for the 2nd batch. The crude glycerol content varied from 34.54 to 42.36% for the 1^st batch and 33.64 to 39.55% for the 2^nd batch. The coexistence of microalgae and bacteria played an important role in leachate treatment and biomass production for biorefinery purposes.

Integral Utilization of Red Seaweed for Bioactive Production

The hydrocolloids carrageenan and agar are the major fraction industrially extracted and commercialized from red seaweeds. However, this type of macroalgae also contains a variety of components with nutritional, functional and biological properties. In the context of sustainability and bioeconomy, where the integral utilization of the natural resources is incentivized, the sequential separation and valorization of seaweed components with biological properties of interest for food, nutraceuticals, cosmeceuticals and pharmaceuticals is proposed. In this work, a review of the available conventional and alternative greener and efficient extraction for obtaining red seaweed bioactives is presented. The potential of emerging technologies for the production of valuable oligomers from carrageenan and agar is also commented, and finally, the sequential extraction of the constituent fractions is discussed.

Potential of mixed-culture microalgae enriched from aerobic and anaerobic sludges for nutrient removal and biomass production from anaerobic effluents

This study examines the potential of the mixed-culture microalgal consortia enriched from aerobic sludge (AeS) and anaerobic sludge (AnS) with regard to nutrient removal and biomass production from four different anaerobic digestion (AD) effluents. Both the inocula achieved the complete removal of the NH₄⁺-N (initial concentration of 40 mg/L) within 14 days from all the effluents. The AeS cultures showed faster and greater microalgal growth, although the NH₄⁺-N removal rate was comparable or higher in the case of the AnS cultures. Further, the AeS and AnS cultures showed significantly different lipid production characteristics in terms of the fatty acid composition and the response to nitrogen deficiency. Nitrogen starvation caused changes in the microbial community structures in all the experimental cultures, which may have influenced the lipid metabolism and the microalgal growth. The overall results suggest that both the inocula exhibit good potential with regard to the treatment of AD effluents.

Nutrient removal and microalgal biomass production from different anaerobic digestion effluents with Chlorella species

Potential of microalgal cultivation as an alternative approach to the treatment of anaerobic digestion (AD) effluents was examined using two representative Chlorella species, Chlorella vulgaris (CV) and Chlorella protothecoides (CP). Both species effectively removed NH₄⁺-N from the AD effluents from four digesters treating different wastes under different operating conditions. In all experimental cultures on the AD effluents, NH₄⁺-N (initial concentration, 40 mg/L) was completely removed within 10 days without residual NO₃^--N or NO₂^--N in batch mode. Compared to CP, CV showed greater biomass and lipid yields (advantageous for biodiesel production), regardless of the media used. Prolonged nitrogen starvation significantly increased the lipid accumulation in all cultures on the AD effluents, and the effect was more pronounced in the CV than in the CP cultures. On the other hand, compared to CV, CP showed significantly faster settling (advantageous for biomass harvesting) in all media. Our results suggest that the Chlorella cultivation on AD effluents under non-sterile, mixed-culture conditions may provide a viable way to manage and valorize the problematic effluents. Diverse bacteria derived from the AD effluents co-existed and presumably interacted with the Chlorella species in the cultures.

Biodiesel production by various oleaginous microorganisms from organic wastes

Biodiesel is a biodegradable and renewable fuel. A large amount of research has considered microbial oil production using oleaginous microorganisms, but the commercialization of microbial lipids produced in this way remains uncertain due to the high cost of feedstock or low lipid yield. Microbial lipids can be typically produced by microalgae, yeasts, and bacteria; the lipid yields of these microorganisms can be improved by using sufficient concentrations of organic carbon sources. Therefore, combining low-cost organic compounds contained in organic wastes with cultivation of oleaginous microorganisms can be a promising approach to obtain commercial viability. However, to achieve effective bioconversion of low-cost substrates to microbial lipids, the characteristics of each microorganism and each substrate should be considered simultaneously. This article discusses recent approaches to developing cost-effective microbial lipid production processes that use various oleaginous microorganisms and organic wastes.

Growth kinetic and fuel quality parameters as selective criterion for screening biodiesel producing cyanobacterial strains

The efficiency of cyanobacterial strains as biodiesel feedstock varies with the dwelling habitat. Fourteen indigenous heterocystous cyanobacterial strains from rice field ecosystem were screened based on growth kinetic and fuel parameters. The highest biomass productivity was obtained in Nostoc punctiforme MBDU 621 (19.22mg/L/day) followed by Calothrix sp. MBDU 701 (13.43mg/L/day). While lipid productivity and lipid content was highest in Nostoc spongiaeforme MBDU 704 (4.45mg/L/day and 22.5%dwt) followed by Calothrix sp. MBDU 701 (1.54mg/L/day and 10.75%dwt). Among the tested strains, Nostoc spongiaeforme MBDU 704 and Nostoc punctiforme MBDU 621 were selected as promising strains for good quality biodiesel production by Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis.

Zinc Removal from the Aqueous Solutions by the Chemically Modified Biosorbents

Biosorbents are the natural origin adsorbents, which popularity in environmental engineering is steadily increasing due to their low price, ease of acquisition, and lack of the toxic properties. Presented research aimed to analyze the possibility of chemical modification of the straw, which is a characteristic waste in the Polish agriculture, to improve its biosorption properties with respect to removal of selected metals from aquatic solutions. Biosorbents used during the tests was a barley straw that was shredded to a size in the range of 0.2-1.0 mm. The biosorption process was performed for aqueous solutions of zinc at a pH 5. Two different modifications of straw were analyzed: esterification with methanol and modification using the citric acid at elevated temperature. The results, obtained during the research, show a clear improvement in sorption capacity of the straw modified by the citric acid. In the case of straw modified with methanol, it has been shown that the effectiveness of zinc biosorption process was even a twice lower with respect to the unmodified straw. Moreover, it was concluded that the removal of analyzed metals was based mainly on the ion-exchange adsorption mechanism by releasing a calcium and magnesium ions from the straw surface to the solution. Graphical Abstractᅟ.

Improved biomass and lipid production in Synechocystis sp. NN using industrial wastes and nano-catalyst coupled transesterification for biodiesel production

In this study, the improved biomass (1.6 folds) and lipid (1.3 folds) productivities in Synechocystis sp. NN using agro-industrial wastes supplementation through hybrid response surface methodology-genetic algorithm (RSM-GA) for cost-effective methodologies for biodiesel production was achieved. Besides, efficient harvesting in Synechocystis sp. NN was achieved by electroflocculation (flocculation efficiency 97.8±1.2%) in 10min when compared to other methods. Furthermore, different pretreatment methods were employed for lipid extraction and maximum lipid content of 19.3±0.2% by Synechocystis sp. NN was attained by ultrasonication than microwave and liquid nitrogen assisted pretreatment methods. The highest FAME (fatty acid methyl ester) conversion of 36.5±8.3mg FAME/g biomass was obtained using titanium oxide as heterogeneous nano-catalyst coupled whole-cell transesterification based method. Conclusively, Synechocystis sp. NN may be used as a biodiesel feedstock and its fuel production can be enriched by hybrid RSM-GA and nano-catalyst technologies.

Removal of nutrients from undiluted anaerobically treated piggery wastewater by improved microalgae

This study aimed at improving the adaptability and biodegradability of tested microalgae in undiluted anaerobic fermentation slurry of piggery wastewater. For that, a two-stage method based on UV irradiation followed by gradual domestication was developed. The distinctness of this method was the elimination of a screening procedure and just needed the UV-irradiated cells with appropriate survival to be subjected to gradual domestication. The microalgae treated with the method not only grew well in undiluted slurry, but achieved outstanding removal efficiencies in total nitrogen (TN) and total phosphorus (TP). Large-scale application was conducted in an open raceway pond, and the concentrations of TN and TP after treatment were 43.80mg/L (removal rate of 89.5%) and 5.83mg/L (removal rate of 85.3%) respectively, which greatly excelled the Chinese discharge standards for livestock and poultry wastewater. The strategy is therefore a promising method for microalgae to purify piggery slurry containing high nutrient contents.

Nitrogen Removal from Landfill Leachate by Microalgae

Landfill leachates result from the degradation of solid residues in sanitary landfills, thus presenting a high variability in terms of composition. Normally, these effluents are characterized by high ammoniacal-nitrogen (N-NH₄⁺) concentrations, high chemical oxygen demands and low phosphorus concentrations. The development of effective treatment strategies becomes difficult, posing a serious problem to the environment. Phycoremediation appears to be a suitable alternative for the treatment of landfill leachates. In this study, the potential of Chlorella vulgaris for biomass production and nutrients (mainly nitrogen and phosphorus) removal from different compositions of a landfill leachate was evaluated. Since microalgae also require phosphorus for their growth, different loads of this nutrient were evaluated, giving the following N:P ratios: 12:1, 23:1 and 35:1. The results have shown that C. vulgaris was able to grow in the different leachate compositions assessed. However, microalgal growth was higher in the cultures presenting the lowest N-NH₄⁺ concentration. In terms of nutrients uptake, an effective removal of N-NH₄⁺ and phosphorus was observed in all the experiments, especially in those supplied with phosphorus. Nevertheless, N-NO₃- removal was considered almost negligible. These promising results constitute important findings in the development of a bioremediation technology for the treatment of landfill leachates.

Two-stage (photoautotrophy and heterotrophy) cultivation enables efficient production of bioplastic poly-3-hydroxybutyrate in auto-sedimenting cyanobacterium

Sustainable production of bioplastics by heterotrophic microbes has been restricted by the limited resources of organic substrates and the energy required for biomass harvest. Here, the easy-to-harvest cyanobacterium (Chlorogloea fritschii TISTR 8527), from which the biomass instantaneously settled to the bottom of liquid culture, was utilized to produce poly-3-hydroxybutyrate (PHB) using a two-stage cultivation strategy. The cells were first pre-grown under normal photoautotrophy to increase their biomass and then recultivated under a heterotrophic condition with a single organic substrate to produce the product. Through optimization of this two-stage cultivation, the mass conversion efficiency of acetate substrate to PHB was obtained at 51 ± 7% (w/w), the comparable level to the theoretical biochemical conversion efficiency of acetate to PHB. This two-stage cultivation that efficiently converted the substrate to the product, concurrent with a reduced culture biomass, may be applicable for the production of other biopolymers by cyanobacteria.

The role of photoperiods on photobioreactors - A potential strategy to reduce costs

The aim of this work was evaluate the role of photoperiods (long-term, frequencies and short) on the growth and lipid content of microalgae Scenedesmus obliquus CPCC05. The results showed that Scenedesmus obliquus can store sufficient energy to sustain cell growth for continuous periods of up to 2h in the dark, without affecting the photosynthetic rate. The values for maximum biomass (9.58mg/Lh) and lipid productivities (2.56mg/Lh) were obtained at photoperiod of 0.91:0.09s (light:dark) and 48 t/d, respectively. Moreover, the best trade-offs between biomass productivity and light energy economy occurred in photoperiods of 0.5:0.5s and 0.91:0.09s (light:dark), and those between lipid productivity and light energy economy occurred in the frequency photoperiod of 24 and 48 t/d. Thus, the use of the photoperiods are an effective strategy for reducing costs of microalgal biomass production.

Co-cultivation of microalgae and nitrifiers for higher biomass production and better carbon capture

The aim of this work was to study co-cultivation of nitrifiers with microalgae as a non-intrusive technique for selective removal of oxygen generated by microalgae. Biomass concentration was, at least, 23% higher in mixed-cultures where nitrifiers kept the dissolved oxygen concentration below 9.0μLL(-1) than in control Chlorella vulgaris axenic-cultures where the concentration of dissolved oxygen was higher than 10.0μLL(-1). This approach to eliminating oxygen inhibition of microalgal growth could become the basis for the development of advanced microalgae reactors for removal of CO2 from the atmosphere, and concentrated CO2 streams. CO2 sequestration would become a chemically and geologically safer and environmentally more sound technology provided it uses microalgal, or other biomass, instead of CO2, for carbon storage.