Modification of biochar derived from sawdust and its application in removal of tetracycline and copper from aqueous solution: Adsorption mechanism and modelling

As(V) adsorption by FeOOH@coal gangue composite from aqueous solution: performance and mechanisms

Arsenic (As) pollution in water poses a significant threat to the ecological environment and human health. Meanwhile, the resource utilisation of coal gangue is of utmost importance in ecologically sustainable development. Thus, the FeOOH@coal gangue composite (FeOOH@CG) was synthesised for As(V) adsorption in this study. The results showed that α-FeOOH, β-FeOOH and Schwertmannite loaded on the surface of FeOOH@CG. Moreover, the adsorption behaviour of As(V) by FeOOH@CG was investigated under different reaction conditions, such as pH, contact time, initial concentration and co-existing anions. The optimum adsorption conditions were as follows: initial As(V) concentration of 60 mg/L, pH of 3.0 and adsorption time of 180-240 h. The adsorption capacity of FeOOH@CG for As(V) was pH-dependent and the maximum adsorption capacity was 185.94 mg/g. The presence of anions (H 2 PO 4 - , HCO 3 - and C l - ) decreased the adsorption efficiency of FeOOH@CG for As(V). The adsorption process of FeOOH@CG for As(V) could be well-described by the pseudo-second-order model and Langmuir model, indicating that the adsorption process mainly depended on chemical adsorption. The thermodynamic analysis suggested that the adsorption was a spontaneous and endothermic process. In addition, according to the analyses of XRD, FTIR and XPS, the dominant mechanisms of As(V) adsorption by FeOOH@CG were electrostatic attraction, complexation and precipitation. In conclusion, FeOOH@CG has great potential as an efficient and environmentally friendly adsorbent for As(V) adsorption from aqueous solution.

Evaluation and optimization of six adsorbents for removal of tetracycline from swine wastewater: Experiments and response surface analysis

The removal of tetracycline antibiotics using adsorbents is becoming an environmentally friendly and cost-effective method. This study systematically analyzed the stability, structure, morphology, and chemical properties of various adsorbents. Batch adsorption experiments (pH, time, temperature, tetracycline concentration, and adsorbent dosage) were conducted to compare the adsorption capacity of the six adsorbents (biochar, activated carbon, montmorillonite, zeolite, chitosan, and polymerized aluminum chloride) for tetracycline removal. The results indicated that montmorillonite had the highest adsorption efficiency, followed by biochar, with chitosan showing the lowest efficiency. At an adsorbent dose of 25 g/L and an initial tetracycline concentration of 120 mg/L, the removal rates of tetracycline by montmorillonite, biochar, and chitosan were 97.6%, 69.3%, and 12.2%, respectively. Furthermore, the removal rate of tetracycline by biochar, following the response surface methodology optimal mode, increased by 5.5%. The Elovich model was better suited to explain the adsorption process of tetracycline compared to the conventional pseudo-first kinetic model and second-order kinetic model. The isothermal adsorption model suggested that both chemisorption and physisorption occurred in all removal processes, in which chemisorption dominated. Tetracycline was efficiently adsorbed through the combined effects of pore filling, electrostatic attraction, π-π interactions, and complexation reactions of surface functional groups. Additionally, montmorillonite demonstrated superior performance as an adsorbent for tetracycline removal from swine wastewater compared to the other adsorbents studied.

A novel iron oxide (Fe3O4)-laden titanium carbide (Ti3C2) MXene stacks for the efficient removal of tetracycline from aqueous solution

Fe3O4 has the advantages of unique magnetic stability and low biological toxicity, which can improve pollutants separation efficiency. MXenes are two-dimensional materials and easy surface functionalization that can provide suitable carriers for Fe3O4. In this work, we synthesized magnetic MXene composites by a one-pot method that relies on doping Fe3O4 particles onto Ti3C2 MXene nanosheets by heat treatment. The Fe3O4/Ti3C2 MXene was analyzed by SEM, XRD, FTIR and XPS techniques, which showed that the material has good tetracycline (TC) removal properties and magnetic separation ability. The results showed that the adsorption capacity of it was 46.42 mg g-1, and the removal efficiency of 0.06 g adsorbent for 50 mL of 30 mg L-1 TC could reach 92.1% in a wide pH range of 4-10, when the adsorption temperature was 25 °C, and the adsorption time was 3 h. The adsorption data were consistent with Langmuir and the proposed second-order kinetic model, and the thermodynamic experiments confirmed that the adsorption of TC was a monolayer physicochemical adsorption coexisting heat-trapping process (ΔH = 15.72 kJ mol-1). In addition, the adsorption of TC by Fe3O4/Ti3C2 MXene was attributed to the synergistic effect of electrostatic attraction, hydrogen bonding and π-π packing. In conclusion, the saturation magnetization of Fe3O4/Ti3C2 MXene is 27.3 emu/g and it can not only be separated from water using its strong magnetic properties to avoid secondary contamination, but also can be used as a promising material to effectively remove antibiotics from aqueous media.

A novel and recyclable silica gel-modified biochar to remove cadmium from wastewater: Model application and mechanism exploration

Water pollution caused by heavy metals is a major environmental problem, threatening water production, food safety, and human health. Cadmium (Cd) pollution is particularly serious because of food-chain biomagnification at toxic concentrations. Modified biochar is promising for heavy metal removal; however, efficient adsorbents for Cd removal are lacking. In the present study, a novel adsorbent, silica gel-modified biochar (SGB), was prepared and applied to treat sewage polluted by Cd. Through the batch adsorption experiments, it is known that SGB possessed outstanding Cd removal ability and recycleability. Furthermore, the adsorption behavior and mechanisms were analyzed by the application of kinetic and isotherm models. The maximum Cd2+ adsorption capacity of SGB was 38.08 mg g-1, and after five recycling processes, the Cd2+ removal rate was still 86.89 %. When the pH of the solution was 7.0, SGB showed the strongest Cd2+ adsorption capacity (29.06 mg g-1). When competitive ions existed, biochar also had high Cd removal efficiency, although the effect of Pb2+ was greater than those of Cu2+ and Zn2+, indicating that SGB was applicable to complex polluted water. Additionally, the main Cd2+ adsorption mechanisms by SGB were electrostatic interactions, π-π interactions, complexation, and co-precipitation. These results showed that SGB can effectively treat Cd-contaminated wastewater as a new adsorbent.

Removal of tetracycline in the water by a kind of S/N co-doped tea residue biochar

Tetracycline (TC) is widely present in the environment, and adsorption technology is a potential remediation method. S/N co-doped tea residue biochar (SNBC) was successfully prepared by hydrothermal carbonization method using tea residue as raw material. S was doped by Na2S2O3·5H2O, and N was doped by N in tea residue. The adsorption efficiency of SNBC could reach 94.16% when the concentration of TC was 100 mg L-1. The adsorption effect of SNBC on TC was 9.38 times more than that of unmodified biochar. Tea biochar had good adsorption effect at pH 4-9. The maximum adsorption capacity of 271 mg g-1 was calculated by the Langmuir isotherm model. The adsorption mechanism involved many mechanisms such as pore filling, π-π interaction and hydrogen bonding. The adsorbent prepared in this study could be used as an effective adsorbent in the treatment of TC wastewater.

Chemometrically-aided general approach to novel adsorbents studies: Case study on the adsorption of pharmaceuticals by the carbonized Ailanthus altissima leaves

A chemometrically based approach was applied to select the most efficient drug adsorbent among the biochars obtained from the novel feedstock, the leaves of the invasive plant (Ailanthus altissima). The representative target adsorbates (atenolol, paracetamol, ketorolac and tetracycline) were selected on the basis of their physicochemical properties to cover a wide chemical space, which is the usual analytical challenge. Their adsorption was investigated using design of experiments as a comprehensive approach to optimise the performance of the adsorption system, rationalise the procedure and overcome common drawbacks. Among the response surface designs, the central composite design was selected as it allows the identification of important experimental factors (solid-to-liquid ratio, pH, ionic strength) and their interactions, and allows the selection of optimal experimental conditions to maximise adsorption performance. The biochars were prepared by pyrolysis at 500 °C and 800 °C (BC-500 and BC-800) and the ZnCl2-activated biochars were prepared at 650 °C and 800 °C (AcBC-650 and AcBC-800). The FTIR spectra revealed that increasing the pyrolysis temperature without activator decreases the intensity of all bands, while activation preserves functional groups, as evidenced by the spectra of AcBC-650 and AcBC-800. High temperatures during activation promoted the development of an efficient surface area, with the maximum observed for AcBC-800 reaching 347 m2 g-1. AcBC-800 was found to be the most efficient adsorbent with removal efficiencies of 34.1, 51.3, 55.9 and 38.2 % for atenolol, paracetamol, ketorolac and tetracycline, respectively. The models describing the relationship between the removal efficiency of AcBC-800 and the experimental factors studied, showed satisfactory predictive ability (predicted R2 > 0.8) and no significant lack-of-fit was observed. The results obtained, including the mathematical models, the properties of the adsorbates and the adsorbents, clearly indicate that the adsorption mechanisms of activated biochars are mainly based on hydrophobic interactions, pore filling and hydrogen bonding.

Selective adsorption of high ionization potential value organic pollutants in wastewater

It is imperative to devise effective removal strategies for high ionization potential (IP) organic pollutants in wastewater as their reduced electron-donating capacity challenges the efficiency of advanced oxidation systems in degradation. Against this backdrop, leveraging the metal-based carbon material structure meticulously, we employed metal-pyridine-N (M-N-C, M=Fe, Co, and Ni) as the electron transfer bridge. This distinctive design facilitated the ordered transfer of electrons from the adsorbent surface to the surface of high IP value pollutants, acting as a "supplement" to compensate for their deficient electron-donating capability, thereby culminating in the selective adsorption of these pollutants. Furthermore, this adsorbent also demonstrated effective removal of trace emerging contaminants (2 mg/L), displayed robust resistance to various salts, exhibited reusability, and maintained stability. These findings carry substantial implications for future carbon-based material design, offering a pathway toward exceptional adsorption performance in treating water pollution.

Performance and Environmental Assessment of Biochar-Based Membranes Synthesized from Traditional and Eco-Friendly Solvents

Water contamination resulting from coal spills is one of the largest environmental problems affecting communities in the Appalachia Region of the United States. This coal slurry contains potentially toxic substances, such as hydrocarbons, heavy metals, and coal cleaning chemicals, and its leakage into water bodies (lakes, rivers, and aquifers) can lead to adverse health effects not only for freshwater bodies and plant life but also for humans. This study focused on two major experiments. The first experiment involved the use of biochar to create a biochar-polysulfone (BC-PSf) flat-sheet multifunctional membrane to remove organic contaminants, and the other major experiment compared eco-friendly (gamma-valerolactone-GVL; Rhodiasolv® PolarClean-PC) and petroleum-derived solvents (i.e., N-methyl-pyrrolidone-NMP) in the fabrication of the biochar-polysulfone membranes. The resulting membranes were tested for their efficiency in removing both positively and negatively charged organic contaminants from the collected water at varying pH values. A comparative life cycle assessment (LCA) with accompanying uncertainty and sensitivity analyses was carried out to understand the global environmental impacts of incorporating biochar, NMP, GVL, and PC in the synthesis of PSf/NMP, BC-PSf/NMP, PSf/GVL, BC-PSf/GVL, PSf/PC, and BC-PSf/PC membranes at a set surface area of 1000 m2. The results showed that the addition of biochar to the membrane matrix increased the surface area of the membranes and improved both their adsorptive and mechanical properties. The membranes with biochar incorporated in their matrix showed a higher potential for contaminant removal than those without biochar. The environmental impacts normalized to the BC-PSf/GVL membrane showed that the addition of biochar increased global warming impacts, eutrophication, and respiratory impacts by over 100% in all the membrane configurations with biochar. The environmental impacts were highly sensitive to biochar addition (Spearman's coefficient > 0.8). The BC/PSf membrane with Rhodiasolv® PolarClean had the lowest associated global environmental impacts among all the membranes with biochar. Ultimately, this study highlighted potential tradeoffs between functional performance and global environmental impacts regarding choices for membrane fabrication.

A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline

Heavy metal ions and antibiotics were simultaneously detected in authentic water systems. This research, for the first time, employed synthesized sophorolipid-modified fly ash(SFA) to eliminate tetracycline(TC) and lead(Pb2+) from wastewater. Various characterization techniques, including SEM-EDS, FTIR, XPS, BET, and Zeta, were employed to investigate the properties of the SFA. The results showed that the sophorolipid modification significantly improved the fly ash's adsorption capacities for the target pollutants. The static adsorption experiments elucidated the adsorption behaviors of SFA towards TC and Pb2+ in single and binary systems, highlighting the effects of different Environmental factors on the adsorption behavior in both types of systems. In single systems, SFA exhibited a maximum adsorption capacity of 128.96 mg/g for Pb2+ and 55.57 mg/g for TC. The adsorption of Pb2+ and TC followed pseudo-second-order kinetics and Freundlich isotherm models. The adsorption reactions are endothermic and occur spontaneously. SFA demonstrates varying adsorption mechanisms for two different types of pollutants. In the case of Pb2+, the primary mechanisms include ion exchange, electrostatic interaction, cation-π interaction, and complexation, while TC primarily engages in hydrogen bonding, π-π interaction, and complexation. The interaction between Pb2+ and TC has been shown to improve adsorption efficiency at low concentrations. Additionally, adsorption-desorption experiments confirm the reliable cycling performance of modified fly ash, highlighting its potential as a cost-effective and efficient adsorbent for antibiotics and heavy metals.

Sustainable efficient utilization of magnetic porous biochar for adsorption of orange G and tetracycline: Inherent roles of adsorption and mechanisms

Iron-doped biochar has been widely used as an adsorbent to remove contaminants due to the high adsorption performance, but it still suffers from complicated preparation methods, unstable iron loading, unsatisfactory specific surface area, and uneven distribution of active sites. Here, a novel magnetic porous biochar (FeCS800) with nanostructure on surface was synthesized by one-pot pyrolysis method of corn straw with K2FeO4, and used in orange G (OG) and tetracycline (TC) adsorption. FeCS800 exhibited outstanding adsorption capacities for OG and TC after K2FeO4 activation and the adsorption data were fitted satisfactorily to Langmuir isotherm and Pseudo-second-order kinetic model. The maximum adsorption capacities of FeCS800 for OG and TC were around 303.03 mg/g and 322.58 mg/g, respectively, at 25 °C and pH 7.0, which were 16.27 and 24.61 times higher than that before modification. Thermodynamic studies showed that the adsorption of OG/TC by FeCS800 were thermodynamically favorable and highly spontaneous. And the adsorption capacity of OG and TC by FeCS800 remained 77% and 81% after 5 cycles, respectively, indicating that FeCS800 had good stability. The outstanding adsorption properties and remarkable reusability of FeCS800 show its great potential to be an economic and environmental adsorbent in contaminants removal.

Performance and mechanism of sulfadiazine and norfloxacin adsorption from aqueous solution by magnetic coconut shell biochar

In this study, magnetic coconut shell biochar loaded with spherical Fe3O4 and γ-Fe2O3 particles was successfully synthesized using a chemical coprecipitation method. The magnetic biochar exhibited a good magnetic separability and environmental security. The maximum sulfadiazine (SDZ) and norfloxacin (NOR) removal efficiencies were 94.8% and 92.3% at pH 4 and 25 °C with adsorbent dosage of 2.5 g/L, respectively. When antibiotic concentrations ranged from 5 to 50 mg/L, the theoretical maximum adsorption capacities of SDZ and NOR were 16.7 mg/g and 25.8 mg/g, respectively. The Langmuir isotherm and pseudo-second-order kinetic models could better describe the adsorption process of both antibiotics, implying the monolayer chemical adsorption. The thermodynamic analysis indicated that the adsorption process was spontaneous and endothermic. The ionic strength had no significant effect on the adsorption behavior of either antibiotic. Combined with BET, FTIR, and XPS results, the dominant mechanisms for SDZ and NOR adsorption were pore filling, π-π electron-donor-acceptor interaction, hydrogen bonds and surface complexation. Moreover, Lewis acid-base interaction also contributed to SDZ adsorption.

Imidacloprid removal by modified graphitic biochar with Fe/Zn bimetallic oxides

Coping with the critical challenge of imidacloprid (IMI) contamination in sewage treatment and farmland drainage purification, this study presents a pioneering development of an advanced modified graphitic white melon seed shells biochar (Fe/Zn@WBC). The Fe/Zn@WBC demonstrates a substantial enhancement in adsorption efficiency for IMI, achieving a remarkable removal rate of 87.69% within 30 min and a significantly higher initial adsorption rate parameter h = 4.176 mg g-1·min-1. This significant improvement outperforms WBC (12.22%, h = 0.115 mg g-1·min-1) and highlights the influence of optimized adsorption conditions at 900 °C and the graphitization degree resulting from Fe/Zn bimetallic oxide modification. Characterization analysis and batch sorption experiments including kinetics, isotherms, thermodynamics and pH factors illustrate that chemical adsorption is the main type of adsorption mechanism responsible for this superior ability to remove IMI through pore filling, hydrogen bonding, hydrophobic interaction, electrostatics interaction, π-π interactions as well as complexation processes. Furthermore, we demonstrate exceptional stability of Fe/Zn@WBC across a broad pH range (pH = 3-11), co-existing ions presence along with humic acid under various real water conditions while maintaining high removal efficiency. This study presents an advanced biochar adsorbent, Fe/Zn@WBC, with efficient adsorption capacity and easy preparation. Through three regeneration cycles via pyrolysis method, it demonstrates excellent pyrolysis regeneration capabilities with an average removal efficiency of 92.02%. The magnetic properties enable rapid separation facilitated by magnetic analysis. By elucidating the efficacy and mechanistic foundations of Fe/Zn@WBC, this research significantly contributes to the field of environmental remediation by providing a scalable solution for IMI removal and enhancing scientific understanding of bimetallic oxides-hydrophilic organic pollutant interactions.

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

Pinecone derived hierarchical carbon nanostructure as a transducer in a solid-state ion-selective electrode for in vivo analysis of calcium ion

Monitoring extracellular calcium ion (Ca2+) chemical signals in neurons is crucial for tracking physiological and pathological changes associated with brain diseases in live animals. Potentiometry based solid-state ion-selective electrodes (ISEs) with the assist of functional carbon nanomaterials as ideal solid-contact layer could realize the potential response for in vitro and in vivo analysis. Herein, we employ a kind of biomass derived porous carbon as a transducing layer to prompt efficient ion to electron transduction while stabilizes the potential drift. The eco-friendly porous carbon after activation (APB) displays a high specific area with inherit macropores, micropores, and large specific capacitance. When employed as transducer in ISEs, a stable potential response, minimized potential drift can be obtained. Benefiting from these excellent properties, a solid-state Ca2+ selective carbon fiber electrodes (CFEs) with a sandwich structure is constructed and employed for real time sensing of Ca2+ under electrical stimulation. This study presents a new approach to develop sustainable and versatile transducers in solid-state ISEs, a crucial way for in vivo sensing.

A review on the alternatives to antibiotics and the treatment of antibiotic pollution: Current development and future prospects

Antibiotics, widely used in the fields of medicine, animal husbandry, aquaculture, and agriculture, pose a serious threat to the ecological environment and human health. To prevent antibiotic pollution, efforts have been made in recent years to explore alternative options for antibiotics in animal feed, but the effectiveness of these alternatives in replacing antibiotics is not thoroughly understood due to the variation from case to case. Furthermore, a systematic summary of the specific applications and limitations of antibiotic removal techniques in the environment is crucial for developing effective strategies to address antibiotic contamination. This comprehensive review summarized the current development and potential issues on different types of antibiotic substitutes, such as enzyme preparations, probiotics, and plant extracts. Meanwhile, the existing technologies for antibiotic residue removal were discussed under the scope of application and limitation. The present work aims to highlight the strategy of controlling antibiotics from the source and provide valuable insights for green and efficient antibiotic treatment.

Preparation of highly adsorptive biochar by sequential iron impregnation under refluxing and pyrolysis at low temperature for removal of tetracycline

Iron-doping modification is a prevailing approach for improving adsorption capability of biochar with environmental friendliness, but usually requires high temperature and suffers from iron aggregation. Herein, a highly adsorptive biochar was manufactured via sequential disperse impregnation of iron by refluxing and pyrolysis at low temperature for eliminating tetracycline (TC) from aqueous solution. Iron oxides and hydroxides were impregnated and stably dispersed on the carbon matrix as pyrolyzed at 200 °C, meanwhile abundant oxygen and nitrogen functional groups were generated on surface. The iron-doped biochar exhibited up to 891.37 mg/g adsorption capacity at pH 5, and could be recycled with high adsorption capability. The adsorption of TC should be mostly contributed to the hydrogen bonding of N/O functional groups and the hydrogen bonding/coordination of iron oxides/hydroxides. This would provide a valuable guide for dispersedly doping iron and conserving functional groups on biochar, and a super iron-doped biochar was prepared with superior recyclability.

Nanostructured, Biodoping-Activated Fungi-Modified Wood for Enhanced Cd2+ Removal: Performances and Insight on Adsorption Mechanisms

Nanostructured activated carbon (AC) adsorbents derived from woody biomass have garnered attention for their potential usage to remove toxic substances from the environment due to their high specific surface area, superior micro/mesoporosity, and tunable surface chemistry profile. However, chemical dopants widely used to enhance the chemical reactivity with heavy metals would pollute the environment and conflict with the vision of a cleaner and sustainable environment. Herein, we report a facile, green, and sustainable approach using fungi modification combined with alkali activation to produce AC for heavy metal removal. The decayed wood-derived AC (DAC) exhibited a high specific surface area of 2098 m2/g, and the content of O and N functional groups was 18 and 2.24%, respectively. It showed remarkable adsorption capacity toward Cd2+ of 148.7 mg/g, which was much higher than most reported Cd2+ adsorbents. Such excellent adsorption capacity was primarily based on enhanced physical adsorption (pore filling, π-π) and chemical adsorption (functional group complexation, ion exchange, and precipitation). Additionally, the DAC showed rapid kinetics and remarkable applicability in both dynamic environments and actual water samples. These results suggest that decayed wood has excellent potential for efficient use in the removal of Cd2+ from wastewater. Furthermore, these results indicate that decayed wood can be cleanly produced into high efficiency heavy metal adsorbents to realize value-added utilization of decayed wood.

Study on mechanism of removal of sudden Tetracycline by compound modified biological sand filtration process

The removal of tetracycline from the sewage plant effluents through advanced treatment methods is key to controlling tetracycline levels in the water environment. In this study, modified quartz sands (QS) were used in a biological sand filter to remove tetracycline. The modified QS, with different surface characteristics, were prepared using glass etching technology combined with subsequent chemical modification methods, including hydroxylation treatment, metal ion modification, and amino modification. The adsorption efficiency of hydroxylated QS was higher than that of metal ion modified and amino modified QS, with adsorption efficiencies of 20.4331 mg/kg, 12.8736 mg/kg, and 10.1737 mg/kg, respectively. Results indicated that QS primarily reduce tetracycline through adsorption. Adsorption on ordinary QS fit the pseudo-first-order kinetic model, while adsorption on other modified QS and biofilm-coated QS fit the pseudo-second-order kinetics model. Biodegradation was identified as another mechanism for tetracycline reduction, which fit the zero-order kinetic model. Pseudomonas alcaligenes and unclassified Pseudomonas accounted for 96.6% of the total tetracycline-degrading bacteria. This study elucidates the effectiveness and mechanisms of five types of QS in treating tetracycline from sewage plant effluents. It provides a novel method for tetracycline reduction in real-world wastewater scenarios.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater

In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents. Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (qe in mg/g). After selecting the best qe values for both biochar and hydrochar, both materials were modified using 20% H3PO4. A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher qe value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo-second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and π-π interaction, whereas cation exchange, mass diffusion, and π-π interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential.

Removal of sulfamethoxazole and Cu, Cd compound pollution by arbuscular mycorrhizal fungi enhanced vertical flow constructed wetlands

The combined pollution of antibiotics and heavy metals (HMs) has a serious impact on the water ecological environment. Previous researches mainly focused on the removal of antibiotics or HMs as single pollutants, with limited investigation into the treatment efficiencies and underlying mechanisms associated with their co-occurring pollution. In this study, 16 micro vertical flow constructed wetlands (MVFCWs) were constructed to treat composite wastewater consisting of sulfamethoxazole (SMX), copper (Cu) and cadmium (Cd), involving two different inoculation treatments (arbuscular mycorrhizal fungi (AMF) inoculated and uninoculated) and eight kinds of pollutant exposure (Control Check (CK), SMX, Cu, Cd, SMX + Cu, SMX + Cd, Cu + Cd, SMX + Cu + Cd). The findings of this study demonstrated that the inoculation of AMF in MVFCWs resulted in removal efficiencies of SMX, Cu, and Cd ranging from 18.70% to 80.52%, 75.18% to 96.61%, and 40.50% to 89.23%, respectively. Cu and CuCd promoted the degradation of SMX in the early stage and inhibited the degradation of SMX in the later stage. Cd did not demonstrate a comparable promotive impact on SMX degradation, and its addition hindered Cu removal. However, comparatively, the presence of Cu exerted a more pronounced inhibitory effect on Cd removal. Furthermore, the addition of Cu augmented the abundances of Proteobacteria, Bacteroidetes (at the phylum level) and Rhodobacter, Lacunisphaera and Flavobacterium (at the genus level), and Cu exposure showed a substantially stronger influence on the microbial community than that of Cd and SMX. AMF might confer protection to plants against HMs and antibiotics by enriching Nakamurella and Lacunisphaera. These findings proved that AMF-C. indica MVFCW was a promising system, and the inoculation of AMF effectively enhanced the simultaneous removal of compound pollution.

Selective adsorption of Cr(VI) by nitrogen-doped hydrothermal carbon in binary system

Selective adsorption of heavy metal ions from industrial effluent is important for healthy ecosystem development. However, the selective adsorption of heavy metal pollutants by biochar using lignin as raw material is still a challenge. In this paper, the lignin carbon material (N-BLC) was synthesized by a one-step hydrothermal carbonization method using paper black liquor (BL) as raw material and triethylene diamine (TEDA) as nitrogen source. N-BLC (2:1) showed excellent selectivity for Cr(VI) in the binary system, and the adsorption amounts of Cr(VI) in the binary system were all greater than 150 mg/g, but the adsorption amounts of Ca(II), Mg(II), and Zn(II) were only 19.3, 25.5, and 6.3 mg/g, respectively. The separation factor (SF) for Cr(VI) adsorption was as high as 120.0. Meanwhile, FTIR, elemental analysis and XPS proved that the surface of N-BLC (2:1) contained many N- and O- containing groups which were favorable for the removal of Cr(VI). The adsorption of N-BLC (2:1) followed the Langmuir model and its maximum theoretical adsorption amount was 618.4 mg/g. After 5th recycling, the adsorption amount of Cr(VI) by N-BLC (2:1) decreased about 15%, showing a good regeneration ability. Therefore, N-BLC (2:1) is a highly efficient, selective and reusable Cr(VI) adsorbent with wide application prospects.

Carbon-based adsorbents for the mitigation of polycyclic aromatic hydrocarbon: a review of recent research

Accumulation of polycyclic aromatic hydrocarbons (PAH) poses significant dangers to the environment and human health. The advancement of technology for cleaning up PAH-contaminated environments is receiving more attention. Adsorption is the preferred and most favorable approach for cleaning up sediments polluted with PAH. Due to their affordability and environmental friendliness, carbonaceous adsorbents (CAs) have been regarded as promising for adsorbing PAH. However, adsorbent qualities, environmental features, and factors may all significantly impact how well CAs remove PAH. According to growing data, CAs, most of which come from laboratory tests, may be utilized to decontaminate PAH in aquatic setups. However, their full potential has not yet been established, especially concerning field applications. This review aims to concisely summarize recent developments in CA, PAH stabilization processes, and essential field application-controlling variables. This review analysis emphasizes activated carbon, biochar, Graphene, carbon nanotubes, and carbon-nanomaterials composite since these CAs are most often utilized as adsorbents for PAH in aquatic systems.

Selective removal of oxytetracycline by molecularly imprinted magnetic biochar

Molecularly imprinted magnetic biochar (MBC@MIPs) was synthesized through molecular imprinting precipitation polymerization. This material demonstrated a selective adsorption capacity of oxytetracycline (OTC) from water samples. Upon characterization of MBC@MIPs, results revealed the formation of a memory cavity shell layer on the magnetic biochar's surface, exhibiting a distinctive recognition effect alongside commendable magnetic and thermal stability. Analysis of the adsorption kinetics indicated that the OTC adsorption process aligned well with the pseudo-second-order rate equation, with chemisorption acting as the predominant mechanism for antibiotic adsorption onto MBC@MIPs. The data could be well described by the Langmuir isotherm model. At 299 K, MBC@MIPs showed a maximum binding capacity of 67.89 mg·g-1, surpassing that of MBC (38.84 mg·g-1) by 1.77 times. MBC@MIPs exhibited the highest selectivity towards OTC, with an imprinting factor (IF) of 5.64. Even amidst interference from antibiotics, MBC@MIPs maintained a significant adsorption capacity for OTC (6.10 mg·g-1), with IF of 6.70.

Artificial intelligence-enabled optimization of Fe/Zn@biochar photocatalyst for 2,6-dichlorophenol removal from petrochemical wastewater: A techno-economic perspective

While numerous studies have addressed the photocatalytic degradation of 2,6-dichlorophenol (2,6-DCP) in wastewater, an existing research gap pertains to operational factors' optimization by non-linear prediction models to ensure a cost-effective and sustainable process. Herein, we focus on optimizing the photocatalytic degradation of 2,6-DCP using artificial intelligence modeling, aiming at minimizing initial capital outlay and ongoing operational expenses. Hence, Fe/Zn@biochar, a novel material, was synthesized, characterized, and applied to harness the dual capabilities of 2,6-DCP adsorption and degradation. Fe/Zn@biochar exhibited an adsorption energy of -21.858 kJ/mol, effectively capturing the 2,6-DCP molecules. This catalyst accumulated photo-excited electrons, which, upon interaction with adsorbed oxygen and/or dissolved oxygen generated •O2-. The •OH radicals could also be produced from h+ in the Fe/Zn@biochar valence band, cleaving the C-Cl bonds to Cl- ions, dechlorinated byproducts, and phenols. An artificial neural network (ANN) model, with a 4-10-1 topology, "trainlm" training function, and feed-forward back-propagation algorithm, was developed to predict the 2,6-DCP removal efficiency. The ANN prediction accuracy was expressed as R2 = 0.967 and mean squared error = 5.56e-22. The ANN-based optimized condition depicted that over 90% of 2,6-DCP could be eliminated under C0 = 130 mg/L, pH = 2.74, and catalyst dosage = 168 mg/L within ∼4 h. This optimum condition corresponded to a total cost of $7.70/m3, which was cheaper than the price estimated from the unoptimized photocatalytic system by 16%. Hence, the proposed ANN could be employed to enhance the 2,6-DCP photocatalytic degradation process with reduced operational expenses, providing practical and cost-effective solutions for petrochemical wastewater treatment.

Efficient adsorption of Cu2+ and Cd2+ from groundwater by MgO-modified sludge biochar in single and binary systems

In this study, MgO-modified sludge biochar (1MBC) prepared from sewage sludge was successfully used as an efficient adsorbent to remove heavy metals from groundwater. The adsorption performance and mechanism of 1MBC on Cu2+ and Cd2+ were investigated in single and binary systems, and the contribution of different mechanisms was quantified. Adsorption kinetics and isotherms analysis revealed that the adsorption processes of Cu2+ and Cd2+ by 1MBC followed the pseudo-second-order kinetic and Langmuir isotherm model in both systems, indicating that Cu2+ and Cd2+ were mainly controlled by chemisorption, and their theoretical maximum adsorption capacities were 240.36 and 219.06 mg·g-1, respectively. The results of the binary system showed that due to the competitive adsorption, the adsorption capacity of 1MBC for both heavy metals was lower than that of the single system, and the selective adsorption of Cu2+ was higher. The influencing variable experiments revealed that the adsorption of Cu2+ and Cd2+ by 1MBC had a wide pH adaption range and strong anti-interference ability to coexisting organics and ions. The adsorption mechanisms involved ion exchange (Cu: 47.39%, Cd: 53.17%), mineral precipitation (Cu: 35.31%, Cd: 24.18%), functional group complexation (Cu: 10.44%, Cd: 14.53%), and other possible mechanisms (Cu: 6.87%, Cd: 8.12%). Furthermore, 1MBC demonstrated excellent regeneration potential after five cycle times. Overall, the results have significant reference value for the practical application of removing heavy metals.

Efficient removal of tetracycline in water using modified eggplant straw biochar supported green nanoscale zerovalent iron: synthesis, removal performance, and mechanism

A novel NaOH modified eggplant straw biochar supported green nanoscale zerovalent iron (P-nZVI/ESBC) composite was synthesized and its removal performance and reaction mechanism for tetracycline (TC) in water were investigated. Multiple characterizations showed that the prepared P-nZVI/ESBC composite contained oxygen-containing functional groups (hydroxyl, carbonyl, and carboxyl groups) and Fe species (nZVI and its oxides). The dosage of composite, temperature, and solution pH significantly affected the removal capacity of the P-nZVI/ESBC composite for TC. The Avrami fraction-order kinetic model and Sips adsorption isotherm model can fit well the removal process of TC by the P-nZVI/ESBC composite, indicating that the adsorption behavior of TC involved multiple adsorption mechanisms and chemical adsorption might occur. The maximum adsorption capacity of the P-nZVI/ESBC composite for TC was 304.62 mg g-1. The adsorption and reductive degradation were the dominant mechanisms of TC removal by the P-nZVI/ESBC composite. This work offers abundant information on the application of eggplant straw to manufacture biochar-based composites for the efficient removal of antibiotic contaminants from aquatic environments.

A novel double-network hydrogel made from electrolytic manganese slag and polyacrylic acid-polyacrylamide for removal of heavy metals in wastewater

Electrolytic manganese slag (EMS), a bulk waste generated in industrial electrolytic manganese production, can be a cost-effective adsorbent for heavy metals removal after appropriate modification. In this study, EMS was activated by NaOH and then used to make the EMS-based double-network hydrogel (an EMS/PAA hydrogel) via a one-pot method. The results showed that the EMS/PAA hydrogel exhibits a high selective adsorption capacity of 153.85, 113.63 and 54.35 mg·g-1 for Pb (II), Cd (II) and Cu (II), respectively. In addition, Density Functional Theory (DFT) suggests that the adsorption energies (Ead) of Pb, Cd and Cu on SiO2/PAA of the EMS/PAA gels are - 4.15, - 1.96, and - 2.83 eV, respectively, and SiO2/PAA, with a strong affinity to Pb2+, is one of the reasons for the selective adsorption capacity of EMS/PAA gel for Pb2+. The removal efficiency of the EMS/PAA gel for Pb2+, Cd2+, Cu2+ decreased after four adsorption-desorption cycles by 20.00 %, 24.56 % and 46.56 %, respectively. Mechanism studies suggested that the elimination of the heavy metals by EMS/PAA gels mainly involves electrostatic attraction, inner-sphere complexation, and coordination interactions. The EMS/PAA hydrogels not only have high adsorption capacity, but are also easy to prepare and circulate, making them ideal for practical applications.

Preparation of novel and recyclable chitosan-alumina nanocomposite as superabsorbent to remove diazinon and tetracycline contaminants from aqueous solution

This work presents a novel, strong and efficient adsorbent (CS@TDI@EDTA@γ-AlO(OH)) prepared through the green process using three components, chitosan, BNPs and EDTA using amide and ester bridges. An eco-friendly and easy approach was used for the preparation of this novel adsorbent, the low cost, easy access to the used materials, and the simplicity of the preparation method are some of the interesting advantages of this work. Also, this prepared adsorbent was used as an adsorbent to remove diazinon organophosphate poison and tetracycline antibiotic from aqueous solutions. In order to confirm the prepared adsorbent structure, the CS@TDI@EDTA@γ-AlO(OH) composite was investigated by various analyses including FT-IR, EDX, XRD, FESEM and TGA. The adsorption behavior of the adsorbent prepared for the removal of tetracycline and diazinon was investigated under different conditions by varying the concentration, temperature, the adsorbent dose, pH and contact time. Based on various tests, the highest diazinon adsorption capacity was obtained for 0.12 g/L adsorbent at pH 7 and 60 °C with 40 mg/L initial concentration. Also, the maximum adsorption capacity of the tetracycline was obtained for 0.12 g/L adsorbent at pH 9 and 60 °C with 30 mg/L initial concentration. The equilibrium results for diazinon and for tetracycline were in good accordance with the Langmuir and Freundlich isotherm models, respectively. Also, the highest adsorption capacities for diazinon at pH 7 and tetracycline at pH 9 were 1428.5 and 555.5 mg/g, respectively. Also the kinetic investigations revealed that the correlation factor (R2) of pseudo-second-order model obtained for the adsorption of diazinon and tetracycline was 0.9986 and 0.9988, while the coefficient k (g/mg.min) was 0.000084 and 0.0033, respectively. These results indicate that the adsorption of diazinon and tetracycline is pseudo-second-order kinetics model. Formation of hydrogen bonds between adsorbate and adsorbent as well as the high specific surface area and porosity of the adsorbent are the main mechanisms that contribute to the adsorption process. In addition, thermodynamic studies indicated that the adsorption of diazinon and tetracycline is a spontaneous endothermic process. The adsorbent prepared in this work was expected to have wide range of applications in wastewater treatment thanks to its good reusability in water and strong removal of diazinon and tetracycline compared to other adsorbents.

Impacts of kaolinite enrichment on biochar and hydrochar characterization, stability, toxicity, and maize germination and growth

In this study, biochar (BC) and hydrochar (HC) composites were synthesized with natural kaolinite clay and their properties, stability, carbon (C) sequestration potential, polycyclic aromatic hydrocarbons (PAHs) toxicity, and impacts on maize germination and growth were explored. Conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed to produce BCs (BC, BCK10, and BCK20, respectively), while hydrothermalized to produce HCs (HC, HCK10, and HCK20, respectively). The synthesized materials were characterized using X-ray diffraction, scanning electron microscope analyses, Fourier transform infrared, thermogravimetric analysis, surface area, proximate analyses, and chemical analysis to investigate the distinction in physiochemical and structural characteristics. The BCs showed higher C contents (85.73-92.50%) as compared to HCs (58.81-61.11%). The BCs demonstrated a higher thermal stability, aromaticity, and C sequestration potential than HCs. Kaolinite enriched-BCs showed the highest cation exchange capacity than pristine BC (34.97% higher in BCK10 and 38.04% higher in BCK20 than pristine BC), while surface area was the highest in kaolinite composited HCs (202.8% higher in HCK10 and 190.2% higher in HCK20 than pristine HC). The recalcitrance index (R50) speculated a higher recalcitrance for BC, BCK10, and BCK20 (R50 > 0.7), minimal degradability for HCK10 and HCK20 (0.5 < R50 < 0.7), and higher degradability for biomass and HC (R50 < 0.5). Overall, increasing the kaolinite enrichment percentage significantly enhanced the thermal stability and C sequestration potential of charred materials, which may be attributed to changes in the structural arrangements. The ∑ total PAHs concentration in the synthesized materials were below the USEPA's suggested limits, indicating their safe use as soil amendments. Germination indices reflected positive impacts of synthesized charred materials on maize germination and growth. Therefore, we propose that kaolinite-composited BCs and HCs could be considered as efficient and cost-effective soil amendments for improving plant growth.

New and effective cassava bagasse-modified biochar to adsorb Food Red 17 and Acid Blue 9 dyes in a binary mixture

A promissory technic for reducing environmental contaminants is the production of biochar from waste reuse and its application for water treatment. This study developed biochar (CWb) and NH4Cl-modified biochar (MCWb) using cassava residues as precursors. CWb and MCWb were characterized and evaluated in removing dyes (Acid Blue 9 and Food Red 17) in a binary system. The adsorbent demonstrated high adsorption capacity at all pH levels studied, showing its versatility regarding this process parameter. The equilibrium of all adsorption experiments was reached in 30 min. The adsorption process conformed to pseudo-first-order kinetics and extended Langmuir isotherm model. The thermodynamic adsorption experiments demonstrated that the adsorption process is physisorption, exhibiting exothermic and spontaneous characteristics. MCWb exhibited highly efficient and selective adsorption behavior towards the anionic dyes, indicating maximum adsorption capacity of 131 and 150 mg g-1 for Food Red 17 and Acid Blue 9, respectively. Besides, MCWb could be reused nine times, maintaining its original adsorption capacity. This study demonstrated an excellent adsorption capability of biochars in removing dyes. In addition, it indicated the recycling of wastes as a precursor of bio composts, a strategy for utilization in water treatment with binary systems. It showed the feasibility of the reuse capacity that indicated that the adsorbent may have many potential applications.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

The magic of algae-based biochar: advantages, preparation, and applications

Compared with other biomass sources, the use of algae as a raw material to prepare biochar (BC) has important advantages including safety, high yield and economy. The protein content of algae cells is as high as 3.2 mg DCW/L, and the graphitic-N and N-O functional groups generated by the pyrolysis of proteins could effectively activate free radicals. Combined with the generated pore structure, the electron transfer/exchange capability was enhanced, which is conducive to improving its catalytic performance. Algae as a natural N source, the manuscript analyzed the surface properties and physicochemical properties of algae-based BC, and investigated its degradation effect on organic/inorganic pollutants in wastewater. Subsequently, the effect of nitrogen-doped BC on the adsorption/catalysis capacity was discussed. Finally, the directed preparation of algae-based BC applied in different scenarios was summarized. Algae-based BC has the property of N doping, which broadens its application efficiency in the environmental field. Overall, this manuscript reviews how to achieve efficient utilization of algae-based BC in wastewater.

Effective Use of Sugarcane-Bagasse-Derived KOH-Activated Biochar for Remediating Norfloxacin-Contaminated Water

Bagasse-derived biochar (SCB750) was prepared at 750 °C using Chinese sugarcane bagasse as a carbon source and then modified with KOH for the removal of the antibiotic norfloxacin (NOR) from aqueous solutions. 3K-SCB750, prepared using a solid-to-liquid mass ratio of bagasse:KOH = 1:3, was found to have the best adsorption performance for NOR. Under the conditions of pH 5, 25 °C, 2.4 g L-1 adsorbent, and 300 mg L-1 NOR, its adsorption of NOR reached equilibrium (97.5% removal) after 60 min. The adsorption behaviours were in line with the quasi-second-order kinetic and Langmuir isotherm models, respectively. The maximum theoretical adsorption capacity reached up to 157.4 mg·g-1 at 40 °C. The thermodynamic parameters showed that the adsorption of NOR onto 3K-SCB750 was a spontaneous, endothermic, and physical process. In addition, Brunauer-Emmett-Teller analysis (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy were conducted to investigate the structural and adsorption properties of 3K-SCB750. Fourier transform infrared spectroscopy (FTIR) was also applied to understand the mechanism of adsorption of NOR onto 3K-SCB750. All of the results indicated that 3K-SCB750 had a large specific surface area of 1038.8 m2·g-1, an average pore size of 1.9 nm, and hierarchical structures with random pores and cracks for efficient removal of NOR. NOR adsorption mechanisms on 3K-SCB750 were related to the pore-filling effect and electrostatic attraction. Therefore, 3K-SCB750 biochar may be used as a promising adsorbent of antibiotics in wastewaters.

Low-temperature biochar production from torrefaction for wastewater treatment: A review

Biochar, a carbon-rich and por ous material derived from waste biomass resources, has demonstrated tremendous potential in wastewater treatment. Torrefaction technology offers a favorable low-temperature biochar production method, and torrefied biochar can be used not only as a solid biofuel but also as a pollutant adsorbent. This review compares torrefaction technology with other thermochemical processes and discusses recent advancements in torrefaction techniques. Additionally, the applications of torrefied biochar in wastewater treatment (dyes, oil spills, heavy metals, and emerging pollutants) are comprehensively explored. Many studies have shown that high productivity, high survival of oxygen-containing functional groups, low temperature, and low energy consumption of dried biochar production make it attractive as an adsorbent for wastewater treatment. Moreover, used biochar's treatment, reuse, and safe disposal are introduced, providing valuable insights and contributions to developing sustainable environmental remediation strategies by biochar.

Nitrogen-doped graphene for tetracycline removal via enhancing adsorption and non-radical persulfate activation

Nitrogen-doped graphene (NG) was synthesized via direct thermal annealing treatment. The obtained NG showed outstanding removal ability for tetracycline (TC) ascribed to enhanced adsorption and persulfate activation. The maximum TC adsorption capacity calculated from the Langmuir model of NG was 227.3 mg/g, which was 1.66 times larger than nitrogen-free graphene. The coexistence of NG and persulfate (PS) exhibited complete degradation of TC within 120 min attributed to the successful modification of nitrogen. Further analysis demonstrated that non-radical electron transfer was the dominant degradation pathway, which was different from the widely acknowledgeable radical mechanism. An electron donor-mediator-acceptor system was introduced, in which TC, NG, and PS performed as electron donor, mediator, and acceptor, respectively. The potential intermediates in the TC degradation process were detected and toxicity assessment was also performed. In addition, more than 75.8% of total organic carbon was removed, and excellent reusability was manifested in multiple adsorption and degradation experiments.

Adsorptive removal of oxytetracycline using MnO2-engineered pine-cone biochar: thermodynamic and kinetic investigation and process optimization

Indiscriminate use of oxytetracycline is linked to the development of antibiotic-resistant genes, posing a serious threat to human health and ecosystem balance. This article reports the adsorptive elimination of oxytetracycline (OTC) from aqueous solution using a newly developed MnO2-modified pine-cone biochar (MnO2/PCBC). The MnO2/PCBC was characterized using X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, CHNS analyzer, inductively coupled plasma-optical emission spectroscopy, and Brunauer-Emmett-Teller N2 adsorption analyzer. Batch adsorption experiments, designed using the central composite design framework of response surface methodology, were conducted to investigate the influence of process variables on the adsorption of OTC onto MnO2/PCBC. The optimized conditions for achieving maximum removal (88.1%) were found to be at pH 8, MnO2/PCBC dose 0.44 g/L, initial OTC concentration 200 mg/L, and temperature 303 K. The adsorption process follows Langmuir (R2=0.95) and Freundlich (R2=0.95) isotherms and pseudo-second-order (R2=0.99) adsorption kinetics. The adsorption process was found to be endothermic (ΔH0 = 33.04 kJ/mol) and spontaneous in nature (ΔG0 from -1.33 kJ/mol at 283 K to -5.65 kJ/mol at 313 K). The synthesized MnO2/PCBC could be recycled and reused for OTC removal with a percentage removal of around 80% after fifth cycle. The results indicate an effective removal of oxytetracycline with only 0.44 g/L MnO2/PCBC with maximum adsorption capacity of 357.14 mg/g which demonstrates improved performance in comparison to many adsorbents reported in literature. This implies that MnO2/PCBC offers potential to be developed into a cost-effective technique for antibiotic removal from water.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Hydrophobic-action-driven removal of six organophosphorus pesticides from tea infusion by modified carbonized bacterial cellulose

The abuse of organophosphorus pesticides (OPPs) in tea planting makes it easy to transfer from tea into its infusion, bringing potential health risks to consumers. Thus, it is essential to adopt reliable techniques to remove OPPs from tea infusion. In this study, three treatment methods were used to modify carbonized bacterial cellulose (CBC) to improve its adsorption performance. Among them, CBC treated by hydrazine hydrate (N-CBC) had the best adsorption effect, whose removal rate for dicrotophos is 13 times that of CBC. The in-depth study of adsorption mechanism proved that hydrophobic interaction dominated the adsorption of OPPs onto N-CBC. The pseudo-second-order kinetic model and Langmuir isotherm model were more suitable to describe the process. Additionally, there were no significant changes in tea infusion quality after N-CBC treatment. This work clarifies that N-CBC benefitted from simple preparation method, excellent adsorption performance and unique adsorption mechanism has potential applications in tea infusion.

A dual bacterial alliance removed erythromycin residues by immobilizing on activated carbon

Removing erythromycin from the environment is a major challenge. In this study, a dual microbial consortium (Delftia acidovorans ERY-6A and Chryseobacterium indologenes ERY-6B) capable of degrading erythromycin was isolated, and the erythromycin biodegradation products were studied. Coconut shell activated carbon was modified and its adsorption characteristics and erythromycin removal efficiency of the immobilized cells were studied. It was indicated that alkali-modified and water-modified coconut shell activated carbon and the dual bacterial system had excellent erythromycin removal ability. The dual bacterial system follows a new biodegradation pathway to degrade erythromycin. The immobilized cells removed 95% of erythromycin at a concentration of 100 mg L^-1 within 24 h through pore adsorption, surface complexation, hydrogen bonding, and biodegradation. This study provides a new erythromycin removal agent and for the first time describes the genomic information of erythromycin-degrading bacteria, providing new clues regarding bacterial cooperation and efficient erythromycin removal.

Simultaneous removal of pharmaceuticals and heavy metals from aqueous phase via adsorptive strategy: A critical review

The coexistence of pharmaceuticals and heavy metals is regarded as a serious threat to aquatic environments. Adsorbents have been widely applied to the simultaneous removal of pharmaceuticals and metals from aqueous phase. Through a comprehensive review, behaviors that promote, inhibit, or have no effect on simultaneous adsorption of pharmaceuticals and heavy metals were found to depend on the system of contaminants and adsorbents and their environmental conditions, such as: characteristics of adsorbent and pollutant, temperature, pH, inorganic ions, and natural organic matter. Bridging and competition effects are the main reasons for promoting and inhibiting adsorption in coexisting systems, respectively. The promotion is more significant in neutral or alkaline conditions. After simultaneous adsorption, a solvent elution approach was most commonly used for regeneration of saturated adsorbents. To conclude, this work could help to sort out the theoretical knowledge in this field, and may provide new insights into the prevention and control of pharmaceuticals and heavy metals coexisting in wastewater.

Efficiency and mechanism of the degradation of ciprofloxacin by the oxidation of peroxymonosulfate under the catalysis of a Fe3O4/N co-doped sludge biochar

A novel and recyclable composite material, Fe₃O₄/N co-doped sludge biochar (FNBC), was developed from original sludge biochar (BC) and found to have excellent stability and superior catalytic capacity during the ciprofloxacin (CIP) degradation under the action of peroxymonosulfate (PMS). In the FNBC/PMS system, an approximately complete removal of CIP was achieved within 60 min under the condition of 1.0 g/L FNBC, 3.0 mM PMS, and 20 mg/L CIP, which was about 2.08 times of that in BC/PMS system (48.01%). Besides, FNBC/PMS system could effectively remove CIP under the influence of wide pH (2.0-10.0) or inorganic ions compared with BC/PMS system. Moreover, it was found that there were radical produced under the effect of Fe element, defects, functional groups, pyridinic N and pyrrolic N and non-radical caused by graphitic N, carbon atoms next to the iron atoms and better adsorption capacity in the FNBC/PMS system. It was observed that the contribution of hydroxyl radical (•OH), sulfate radical (SO₄^•-) and singlet oxygen (¹O₂), which were the main reactive oxygen species, during the CIP degradation, were 75.80%, 11.49% and 10.26%, respectively. Furthermore, total organic carbon (TOC) variation was analyzed and the degradation pathway of CIP was speculated. The application of this material could combine the recycling of sludge with the effective degradation of refractory organic pollutant, providing an environmentally friendly and economic method.

Structuring alginate/dopamine powder into macroscopic aerogel microsphere for exceptional removal of tetracycline from water: Performance and mechanisms

Aerogel was selected as one of IUPAC Top Ten Emerging Technologies in Chemistry in 2022, and has attracted tremendous concerns of scientists in removal of emerging contaminants. In this work a novel Fe³⁺ cross-linked alginate aerogel (SA/DA-Fe³⁺) with multiple sorption sites were facilely fabricated and applied for highly efficient removal of tetracycline (TC) from water. Results showed that Fe³⁺ and DA cooperatively improve adsorption of TC and TC was efficiently removed over a broad pH range of 4-8. The kinetics process can be better described by a chemisorption controlled pseudo-second-order kinetics model and Langmuir isotherm equation with characteristics of monolayer coverage. The fitted q_max value of TC at ambient temperature was 804.6 mg g^-1 higher than those of other reported adsorbents. Multiple interactions including π-π EDA, complexation, hydrogen bonding, electrostatic attraction, etc. were involved in adsorption process. Moreover, SA/DA-Fe³⁺ aerogel exhibited satisfactory stability, reusability, and recyclability for consecutive applications. Most importantly, after consecutively running for >1000 h with dynamic sorption capacity over 500 mg g^-1, the packed-column was still not saturated, manifesting its great potentials for treating actual wastewaters. Thus, above superiorities make SA/DA-Fe³⁺ a promising candidate adsorbent for treating TC-containing wastewater.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

NiCo2O4-loaded sunflower husk-derived biochar as efficient peroxymonosulfate activator for tetracycline removal in water

In this study, biochar produced from sunflower seeds husk was activated through ZnCl₂ to support the NiCo₂O₄ nanoparticles (NiCo₂O₄@ZSF) in catalytic activation of peroxymonosulfate (PMS) toward tetracycline (TC) removal from aqueous solution. The good dispersion of NiCo₂O₄ NPs on the ZSF surface provided sufficient active sites and abundant functional groups for the adsorption and catalytic reaction. The NiCo₂O₄@ZSF activating PMS showed high removal efficiency up to 99% after 30 min under optimal condition ([NiCo₂O₄@ZSF] = 25 mg L^-1, [PMS] = 0.04 mM, [TC] = 0.02 mM and pH = 7). The catalyst also exhibited good adsorption performance with a maximum adsorption capacity of 322.58 mg g^-1. Sulfate radicals (SO₄^•-), superoxide radical (O₂•-), and singlet oxygen (¹O₂) played a decisive role in the NiCo₂O₄@ZSF/PMS system. In conclusion, our research elucidated the production of highly efficient carbon-based catalysts for environmental remediation, and also emphasized the potential application of NiCo₂O₄ doped biochar.

Insight into the roles of soluble, loosely bound and tightly bound extracellular polymeric substances produced by Enterobacter sp. in the Cd2+ and Pb2+ biosorption process: Characterization and mechanism

Extracellular polymeric substances (EPSs) are macromolecular polymers formed by metabolic secretion, and they have great potential for removing heavy metal (HM) ions from the aquatic phase. In this study, the contributions of soluble EPSs (S-EPSs), loosely bound EPSs (LB-EPSs) and tightly bound EPSs (TB-EPSs) secreted by Enterobacter sp. to Cd²⁺ and Pb²⁺ adsorption were analyzed. The results indicated that in a solution containing both Cd²⁺ and Pb²⁺, pH= 6.0 was best suited for the adsorption process, and adsorption equilibrium was reached in approximately 120 min. Moreover, the mechanism for adsorption of Cd²⁺ and Pb²⁺ by the different layers of EPSs involved spontaneous chemical processes. However, Cd²⁺ adsorption by the three layers of the EPSs was an exothermic process (∆H⁰ <0), but Pb²⁺ adsorption by the three layers of the EPSs was an endothermic process (∆H⁰ >0). The variations in zeta potentials indicated that ion exchange occurred during Cd²⁺ and Pb²⁺ adsorption. FT-IR, XPS and 3D-EEM analyses indicated that the functional groups of the EPSs involved in adsorption were mainly the CO, C-O and C-O-C groups of the polysaccharides; furthermore, fulvic acid-like substances, humic-like substances and tyrosine-like proteins played important roles in the adsorption of Cd²⁺ and Pb²⁺ by the different EPS layers.

Efficient removal of phytochrome using rice straw-derived biochar: Adsorption performance, mechanisms, and practical applications

Rice straw derived biochar was fabricated and applied as a purification agent. The adsorption kinetics, isotherms, and thermodynamics for adsorbates were determined using the biochar. Adsorption kinetics and isotherms were best fitted by the pseudo-second order and Langmuir models. Biochar could effectively remove chlorophyll in 9 different solutions. Biochar was employed as a clean-up reagent for 149 pesticides detection, which revealed that biochar had a higher phytochrome removal capacity than graphitized carbon black and 123 pesticides had satisfactory recovery values. The biochar was prepared into a sample pad by electrospinning and was then used for online sample clean-up in a test strip, and it showed high ability of removing phytochrome and improving detection sensitivity. Thus, biochar could be applied as a purification agent to remove pigmentation, making it a promising candidate not only for sample pretreatment but also in the fields of food, agriculture and environment.

The Effect of Lithium Ion Leaching from Calcined Li-Al Hydrotalcite on the Rapid Removal of Ni2+/Cu2+ from Contaminated Aqueous Solutions

A layered double hydroxide (LDH) calcined-framework adsorbent was investigated for the rapid removal of heavy metal cations from plating wastewater. Li-Al-CO₃ LDH was synthesized on an aluminum lathe waste frame surface to prepare the sorbent. The calcination treatment modified the LDH surface properties, such as the hydrophilicity and the surface pH. The change in surface functional groups and the leaching of lithium ions affected the surface properties and the adsorption capacity of the heavy metal cations. A zeta potential analysis confirmed that the 400 °C calcination changed the LDH surface from positively charged (+10 mV) to negatively charged (-17 mV). This negatively charged surface contributed to the sorbent instantly bonding with heavy metal cations in large quantities, as occurs during contact with wastewater. The adsorption isotherms could be fitted using the Freundlich model. The pseudo-second-order model and the rate-controlled liquid-film diffusion model successfully simulated the adsorption kinetics, suggesting that the critical adsorption step was a heterogeneous surface reaction. This study also confirmed that the recovered nickel and/or copper species could be converted into supported metal nanoparticles with a high-temperature hydrogen reduction treatment, which could be reused as catalysts.

Treatment of micro-polluted water with low C/N ratio by immobilized bioreactor using PVA/sintered ores@sponge cube: Performance effects and potential removal pathways

The widespread use of industrial products containing lead (Pb²⁺) and tetracycline (TC) medications led to the combined pollution of nitrate, Pb²⁺, and TC in water. A novel biomaterial containing polyvinyl alcohol (PVA) and sponge cube with sintered ores (PVA/sintered ores@sponge cube) was prepared to ensure the maximum NO₃^--N removal efficiency (96.21 %) of the bioreactor under the hydraulic retention time (HRT) of 7.0 h, pH of 6.0, and the carbon to nitrogen (C/N) of 1.5 that had the ability to remove TC and Pb²⁺ synergistically. Composite pollutants slightly decreased denitrification performance in the combined pollution system on account of the addition of sintered ores. Results of scanning electron microscopy (SEM) showed that the sintered ores in the biocarrier induced denitrification and the adsorption of bio‑iron oxides were involved in the removal of TC and Pb²⁺. The simultaneous removal of composite pollutants during denitrification was facilitated by extracellular polymeric substances (EPS) as revealed by Fourier transform infrared spectroscopy (FTIR) and fluorescence excitation-emission matrix (EEM). In addition, high-throughput sequencing results showed that Zoogloea had the highest proportion in the bioreactor.