Flower-like ZnO nanostructure based electrochemical DNA biosensor for bacterial meningitis detection

Dual template (epitope) imprinted electrode for sensing bacterial protein with high selectivity

Epitope imprinting has shown better prospects to synthesize synthetic receptors for proteins. Here, dual epitope imprinted polymer electrode (DEIP) matrix was fabricated on gold surface of electrochemical quartz crystal microbalance (EQCM) for recognition of target epitope sequence in blood samples of patients suffering from brain fever. Epitope sequences from outer membrane protein Por B of Neisseria meningitidis (MC58) bacteria predicted through immunoinformatic tools were chosen for imprinting. Self-assembled monolayers (SAM) of cysteine appended epitope sequences on gold nanoparticles were subjected to polymerization prior to electrodeposition on gold coated EQCM electrode. The polymeric matrix was woven around the cysteine appended epitope SAMs through multiple monomers (3-sulfo propyl methacrylate potassium salt (3-SPMAP), benzyl methacrylate (BMA)) and crosslinker (N, N'-methylene-bis-acrylamide). On extraction of the peptide sequences, imprinted cavities were able to selectively and specifically bind targeted epitope sequences in laboratory samples as well as 'real' samples of patients. Selectivity of sensor was examined through mismatched peptide sequences and certain plasma proteins also. The sensor was able to show specific binding towards the blood samples of infected patients, even in the presence of 'matrix' and other plasma proteins such as albumin and globulin. Even other peptide sequences, similar to epitope sequences only with one or two amino acid mismatches were also unable to show any binding. The analytical performance of DEIP-EQCM sensor was tested through selectivity, specificity, matrix effect, detection limit (0.68-1.01 nM), quantification limit (2.05-3.05 nM) and reproducibility (RSD ~ 5%). Hence, a diagnostic tool for bacterium causing meningitis is successfully fabricated in a facile manner which will broaden the clinical access and make efficient population screening feasible.

Hydrangea-like AuPtRu/ZnO-rGO Nanocomposites with Enhanced Peroxidase Mimiking Activity for Senitive Colorimetric Determination of H2O2

In this study, a facile and cost-effective hydrothermal synthesis method was used to synthesize zinc oxide nanoflowers modified by reduced graphene oxide, and subsequently, trimetallic AuPtRu nanoparticles(AuPtRuNPs) were supported via the reduction method for high-sensitivity colorimetric detection of H2O2 in weakly acidic solutions. Compared to monometallic and bimetallic nanoparticles, trimetallic nanoparticles exhibit significant synergistic effects and enhanced catalytic activity. After providing a three-dimensional structure with multiple pores by zinc oxide and enhancing electron transfer ability by reduced graphene, the trimetallic nanocomposites (AuPtRu/ZnO-rGO) exhibited excellent peroxidase-mimicking activity, which can effectively catalyze 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue oxidation product (oxTMB) in the presence of H2O2. Compared to horseradish peroxidase (HRP), AuPtRu/ZnO-rGO demonstrated significantly enhanced catalytic velocity (Vmax = 6.16 × 10-8 M/s) and affinity (Km = 0.02) for H2O2. The study of the catalytic mechanism showed that trimetallic Au, Pt, and Ru could effectively catalyze H2O2 to produce hydroxyl radicals (•OH) to accelerate the oxidation of TMB and enhance the peroxidase-mimicking activity of the AuPtRu/ZnO-rGO nanocomposites. The results showed that the as-synthesized hydrangea-like AuPtRu/ZnO-rGO nanocomposites showed enhanced peroxidase-mimicking activity. It could be used for the colorimetric detection of H2O2 in the range 5-1000 μM with a LOD of 3.0 μM (S/N = 3), and the recoveries are 93.0-101.7%. In addition, the AuPtRu/ZnO-rGO nanocomposites have good applicability for sensitive colorimetric determination of H2O2 in milk, and it has broad application prospects as a multifunctional sensing platform in the food processing industry.

Detection of Environmentally Harmful Malathion Pesticides Using a Bimetallic Oxide of CuO Nanoparticles Dispersed over a 3D ZnO Nanoflower

Super-sensitive malathion detection was achieved using a nonenzymatic electrochemical sensor based on a CuO/ZnO-modified glassy carbon electrode (GCE). Due to the high affinity between the Cu element and the sulfur groups in malathion, the developed CuO-ZnO/GCE sensor may bond malathion with ease, inhibiting the redox signal of the Cu element when malathion is present. In addition to significantly increasing the ability of electron transfer, the addition of 3D-flower-like ZnO enhances active sites of the sensor interface for the high affinity of malathion, giving the CuO-ZnO/GCE composite an exceptional level of sensitivity and selectivity. This enzyme-free CuO-ZnO/GCE malathion sensor demonstrates outstanding stability and excellent detection performance under optimal operating conditions with a wide linear range of malathion from 0 to 200 nM and a low detection limit of 1.367 nM. A promising alternative technique for organophosphorus pesticide (OP) determination is offered by the analytical performance of the proposed sensor, and this method can be quickly and sensitively applied to samples that have been contaminated with these pesticides.

The Interplay of Growth Mechanism and Properties of ZnO Nanostructures for Different Applications

This review provides a background on the structure and properties of ZnO nanostructures. ZnO nanostructures are advantageous for many applications in sensing, photocatalysis, functional textiles, and cosmetic industries, which are described in this review. Previous work using UV Visible (UV-vis) spectroscopy and scanning electron microscopy (SEM) for ZnO nanorod growth analysis in-solution and on a substrate for determination of optical properties and morphology is discussed, as well as their results in determining the kinetics and growth mechanisms. From this literature review, it is understood that the synthesis process greatly affects nanostructures and properties; and hence, their applications. In addition, in this review, the mechanism of ZnO nanostructure growth is unveiled, and it is shown that by having greater control over their morphology and size through such mechanistic understanding, the above-mentioned applications can be affected. The contradictions and gaps in knowledge are summarized in order to highlight the variations in results, followed by suggestions for how to answer these gaps and future outlooks for ZnO nanostructure research.

Realization of a DNA biosensor using inverted Lamb wave MEMS resonator based on ZnO/SiO2/Si/ZnO membrane

A novel technique based on inverted Lamb wave MEMS resonator has been exploited for the realization of a DNA biosensor. Zinc oxide based Lamb wave MEMS resonator in the inverted configuration of ZnO/SiO₂/Si/ZnO is fabricated for label free and efficient detection of Neisseria meningitidis, responsible for bacterial meningitis. Meningitis remains a devastating endemic in sub-Saharan Africa. Its early detection can prevent the spread and its lethal complications. The developed biosensor shows a very high sensitivity of 310 Hz(ngμl^-1)^-1 and very low detection limit of 82 pgμl^-1 for symmetric mode of the Lamb wave device while the antisymmetric mode shows a sensitivity of 202 Hz(ngμl^-1)^-1 and the limit of detection of 84 pgμl^-1. This very high sensitivity and very low detection limit of the Lamb wave resonator can be attributed to very high mass loading effect on the membranous structure of Lamb wave device, unlike the bulk substrate based devices. The indigenously developed MEMS based inverted Lamb wave biosensor shows high selectivity, long shelf life and good reproducibility. The ease of operation, low processing time and possibility of wireless integration of the of the Lamb wave DNA sensor paves a path towards the promising application in the field of meningitidis detection. The use of fabricated biosensor can be extended to other viral and bacterial detection applications as well.

Label-free electrochemical detection of cancer biomarkers DNA and anti-p53 at tin oxide quantum dot-gold-DNA nanoparticle modified electrode

Lung cancer is one of the deadliest types of cancer and accounts for 8.1% of all cancer related deaths. To prevent a growing death rate, it is crucial to identify lung cancer at an early stage by single polynucleotide morphism detection. In this paper, we present a novel label-free electrochemical biosensor based on composites of tin oxide quantum dots and gold nanoparticles (SnO₂-QD-Au) for the sensitive and precise detection of lung cancer DNA. The SnO₂-QD and SnO₂-QD-Au nanoparticles were characterized using Scanning and Transmission Electron Microscopes (SEM and TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis spectroscopy (UV), Fourier transmission infrared spectroscopy (FTIR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Gold thiol covalent bonding was used for immobilising probe DNA on the surface of SnO₂-QD-Au nanoparticles followed by target DNA hybridization and detected electrochemically in presence of 1 mM [Fe(CN₆)]^3-/4-as a redox couple probe. Under ideal circumstances, the sensor showed the lowest detection limit of 3.2 × 10^-20 M with a linear range of 1 × 10^-6 - 1 × 10^-20 M. Additionally, the sensing method was applied to find a cancer biomarker, Anti-P53 antibody.

Electrochemical Immunosensors Based on Zinc Oxide Nanorods for Detection of Antibodies Against SARS-CoV-2 Spike Protein in Convalescent and Vaccinated Individuals

Even after over 2 years of the COVID-19 pandemic, research on rapid, inexpensive, and accurate tests remains essential for controlling and avoiding the global spread of SARS-CoV-2 across the planet during a potential reappearance in future global waves or regional outbreaks. Assessment of serological responses for COVID-19 can be beneficial for population-level surveillance purposes, supporting the development of novel vaccines and evaluating the efficacy of different immunization programs. This can be especially relevant for broadly used inactivated whole virus vaccines, such as CoronaVac, which produced lower titers of neutralizing antibodies. and showed lower efficacy for specific groups such as the elderly and immunocompromised. We developed an impedimetric biosensor based on the immobilization of SARS-CoV-2 recombinant trimeric spike protein (S protein) on zinc oxide nanorod (ZnONR)-modified fluorine-doped tin oxide substrates for COVID-19 serology testing. Due to electrostatic interactions, the negatively charged S protein was immobilized via physical adsorption. The electrochemical response of the immunosensor was measured at each modification step and characterized by scanning electron microscopy and electrochemical techniques. We successfully evaluated the applicability of the modified ZnONR electrodes using serum samples from COVID-19 convalescent individuals, CoronaVac-vaccinated with or without positive results for SARS-CoV-2 infection, and pre-pandemic samples from healthy volunteers as controls. ELISA for IgG anti-SARS-CoV-2 spike protein was performed for comparison, and ELISA for IgG anti-RBDs of seasonal coronavirus (HCoVs) was used to test the specificity of immunosensor detection. No cross-reactivity with HCoVs was detected using the ZnONR immunosensor, and more interestingly, the sensor presented higher sensitivity when compared to negative ELISA results. The results demonstrate that the ZnONRs/spike-modified electrode displayed sensitive results for convalescents and vaccinated samples and shows excellent potential as a tool for the population's assessment and monitoring of seroconversion and seroprevalence.

A microfluidic fully paper-based analytical device integrated with loop-mediated isothermal amplification and nano-biosensors for rapid, sensitive, and specific quantitative detection of infectious diseases

Bacterial meningitis, an infection of the membranes (meninges) and cerebrospinal fluid (CSF) surrounding the brain and spinal cord, is one of the major causes of death and disability worldwide. Higher case-fatality rates and short survival times have been reported in developing countries. Hence, a quick, straightforward, and low-cost approach is in great demand for the diagnosis of meningitis. In this research, a microfluidic fully paper-based analytical device (μFPAD) integrated with loop-mediated isothermal amplification (LAMP) and ssDNA-functionalized graphene oxide (GO) nano-biosensors was developed for the first time for a simple, rapid, low-cost, and quantitative detection of the main meningitis-causing bacteria, Neisseria meningitidis (N. meningitidis). The results can be successfully read within 1 hour with the limit of detection (LOD) of 6 DNA copies per detection zone. This paper device also offers versatile functions by providing a qualitative diagnostic analysis (i.e., a yes or no answer), confirmatory testing, and quantitative analysis. These features make the presented μFPAD capable of a simple, highly sensitive, and specific diagnosis of N. meningitis. Furthermore, this microfluidic approach has great potential in the rapid detection of a wide variety of different other pathogens in low-resource settings.

Biosynthesized metal oxide nanoparticles for sustainable agriculture: next-generation nanotechnology for crop production, protection and management

The current agricultural sector is not only in its most vulnerable state but is also becoming a threat to our environment due to expanding population and growing food demands along with worsening climatic conditions. In addition, numerous agrochemicals presently being used as fertilizers and pesticides have low efficiency and high toxicity. However, the rapid growth of nanotechnology has shown great promise to tackle these issues replacing conventional agriculture industries. Since the last decade, nanomaterials especially metal oxide nanoparticles (MONPs) have been attractive for improving agricultural outcomes due to their large surface area, higher chemical/thermal stability and tunable unique physicochemical characteristics. Further, to achieve sustainability, researchers have been extensively working on ecological and cost-effective biological approaches to synthesize MONPs. Hereby, we have elaborated on recent successful biosynthesis methods using various plants/microbes. Furthermore, we have elucidated different mechanisms for the interaction of MONPs with plants, including their uptake/translocation/internalization, photosynthesis, antioxidant activity, and gene alteration, which could revolutionize crop productivity/yield through increased nutrient amount, photosynthesis rate, antioxidative enzyme level, and gene upregulations. Besides, we have briefly discussed about functionalization of MONPs and their application in agricultural-waste-management. We have further illuminated recent developments of various MONPs (Fe₂O₃/ZnO/CuO/Al₂O₃/TiO₂/MnO₂) as nanofertilizers, nanopesticides and antimicrobial agents and their implications for enhanced plant growth and pest/disease management. Moreover, the potential use of MONPs as nanobiosensors for detecting nutrients/pathogens/toxins and safeguarding plant/soil health is also illuminated. Overall, this review attempts to provide a clear insight into the latest advances in biosynthesized MONPs for sustainable crop production, protection and management and their scope in the upcoming future of eco-friendly agricultural nanotechnology.

Hierarchical cage-frame type nanostructure of CeO2 for bio sensing applications: from glucose to protein detection

Self-assembled hierarchical nanostructures are slowly superseding their conventional counterparts for use in biosensors. These morphologies show high surface area with tunable porosity and packing density. Modulating the interfacial interactions and subsequent particle assembly occurring at the water-and-oil interface in inverse miniemulsions, are amongst the best strategies to stabilize various type of hollow nanostructures. The paper presents a successful protocol to obtain CeO₂ hollow structures based biosensors that are useful for glucose to protein sensing. The fabricated glucose sensor is able to deliver high sensitivity (0.495 μA cm^-2 nM^-1), low detection limit (6.46 nM) and wide linear range (0 nM to 600 nM). CeO₂ based bioelectrode can also be considered as a suitable candidate for protein sensors. It can detect protein concentrations varying from 0 to 30 µM, which is similar or higher than most reports in the literature. The limit of detection (LOD) for protein was ∼0.04 µM. Therefore, the hollow CeO₂ electrodes, with excellent reproducibility, stability and repeatability, open a new area of application for cage-frame type particles.

Progress in the Application of Nanoparticles and Graphene as Drug Carriers and on the Diagnosis of Brain Infections

The blood–brain barrier (BBB) is the protective sheath around the brain that protects the sensitive microenvironments of the brain. However, certain pathogens, viruses, and bacteria disrupt the endothelial barrier and cause infection and hence inflammation in meninges. Macromolecular therapeutics are unable to cross the tight junctions, thereby limiting their bioavailability in the brain. Recently, nanotechnology has brought a revolution in the field of drug delivery in brain infections. The nanostructures have high targeting accuracy and specificity to the receptors in the case of active targeting, which have made them the ideal cargoes to permeate across the BBB. In addition, nanomaterials with biomimetic functions have been introduced to efficiently cross the BBB to be engulfed by the pathogens. This review focuses on the nanotechnology-based drug delivery approaches for exploration in brain infections, including meningitis. Viruses, bacteria, fungi, or, rarely, protozoa or parasites may be the cause of brain infections. Moreover, inflammation of the meninges, called meningitis, is presently diagnosed using laboratory and imaging tests. Despite attempts to improve diagnostic instruments for brain infections and meningitis, due to its complicated and multidimensional nature and lack of successful diagnosis, meningitis appears almost untreatable. Potential for overcoming the difficulties and limitations related to conventional diagnostics has been shown by nanoparticles (NPs). Nanomedicine now offers new methods and perspectives to improve our knowledge of meningitis and can potentially give meningitis patients new hope. Here, we review traditional diagnosis tools and key nanoparticles (Au-NPs, graphene, carbon nanotubes (CNTs), QDs, etc.) for early diagnosis of brain infections and meningitis.

Biosensors for the Detection of Bacterial and Viral Clinical Pathogens

Biosensors are measurement devices that can sense several biomolecules, and are widely used for the detection of relevant clinical pathogens such as bacteria and viruses, showing outstanding results. Because of the latent existing risk of facing another pandemic like the one we are living through due to COVID-19, researchers are constantly looking forward to developing new technologies for diagnosis and treatment of infections caused by different bacteria and viruses. Regarding that, nanotechnology has improved biosensors' design and performance through the development of materials and nanoparticles that enhance their affinity, selectivity, and efficacy in detecting these pathogens, such as employing nanoparticles, graphene quantum dots, and electrospun nanofibers. Therefore, this work aims to present a comprehensive review that exposes how biosensors work in terms of bacterial and viral detection, and the nanotechnological features that are contributing to achieving a faster yet still efficient COVID-19 diagnosis at the point-of-care.

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Electrochemical sensors have increasingly been linked with terms as modern biomedically effective highly selective and sensitive devices, wearable and wireless technology, portable electronics, smart textiles, energy storage, communication and user-friendly operating systems. The work brings the overview of the current advanced materials and their application strategies for improving performance, miniaturization and portability of sensing devices. It provides the extensive information on recently developed (bio)sensing platforms based on voltammetric, amperometric, potentiometric and impedimetric detection modes including portable, non-invasive, wireless, and self-driven miniaturized devices for monitoring human and animal health. Diagnostics of selected free radical precursors, low molecular biomarkers, nucleic acids and protein-based biomarkers, bacteria and viruses of today's interest is demonstrated.

Flexible ZnO-mAb nanoplatforms for selective peripheral blood mononuclear cell immobilization

Cancer is the second cause of death worldwide. This devastating disease requires specific, fast, and affordable solutions to mitigate and reverse this trend. A step towards cancer-fighting lies in the isolation of natural killer (NK) cells, a set of innate immune cells, that can either be used as biomarkers of tumorigenesis or, after autologous transplantation, to fight aggressive metastatic cells. In order to specifically isolate NK cells (which express the surface NKp30 receptor) from peripheral blood mononuclear cells, a ZnO immunoaffinity-based platform was developed by electrodeposition of the metal oxide on a flexible indium tin oxide (ITO)-coated polyethylene terephthalate (PET) substrate. The resulting crystalline and well-aligned ZnO nanorods (NRs) proved their efficiency in immobilizing monoclonal anti-human NKp30 antibodies (mAb), obviating the need for additional procedures for mAb immobilization. The presence of NK cells on the peripheral blood mononuclear cell (PBMCs) fraction was evaluated by the response to their natural ligand (B7-H6) using an acridine orange (AO)-based assay. The successful selection of NK cells from PBMCs by our nanoplatform was assessed by the photoluminescent properties of AO. This easy and straightforward ZnO-mAb nanoplatform paves the way for the design of biosensors for clinic diagnosis, and, due to its inherent biocompatibility, for the initial selection of NK cells for autotransplantation immunotherapies.

Nanotechnology-Based Diagnostics and Therapy for Pathogen-Related Infections in the CNS

The central nervous system (CNS) encompasses the brain, spinal cord, and nerves, where both brain and spinal cord are safeguarded by the meninges. However, serious bacterial, viral, or fungal infection in the brain causes life-threatening diseases such as meningitis. Engineered nanostructures hold great promise for not only in the diagnosis but also for combating microbial drug resistance owing to their high surface area and innate antibacterial activity. We delineate several nanoparticle-based approaches to enhance the CNS delivery of drugs across the blood-brain barrier (BBB). While pathogens invade the CNS by phagocytosis or receptor (e.g., EphA2)-mediated transcytosis, most of the nanoparticles cross the BBB via receptor-mediated transcytosis (e.g., antibody, peptide, protein). We also provide our perspectives on the diagnostic pathways based on nanotechnology for the detection of pathogens in the brain, thereby opening up new therapeutic avenues.

One-Step Synthesis of Tunable Zinc-Based Nanohybrids as an Ultrasensitive DNA Signal Amplification Platform

Herein, we demonstrated a one-step route for the manufacturing of polypyrrole (PPy)/zinc nanohybrids with tunable elemental composition and nanoscale component mixing resolution by using an ultrafast (within tens of seconds) microwave approach for ultrasensitive DNA biosensors. The zinc-based nanoparticles (i.e., MWPPy/ZnO and MWPPy/ZnS) were produced by loading zinc acetate (ZnAc₂) on PPy under the electromagnetic environment of a microwave with or without sulfur powder in one pot. Then, the signal amplification platforms were fabricated by modifying the glassy carbon electrode (GCE) with the obtained nanohybrids. It was found that both of the resultant MWPPy/ZnO and MWPPy/ZnS were suitable for ultrasensitive DNA molecule detection of the gastric carcinoma related PIK3CA gene ascribing to their unique hybrid nanostructures and surface characteristics. Experimental results revealed that the proposed GCE/MWPPy/ZnO sensor showed a linear range of 1.0 × 10^-10 to 1.0 × 10^-13 M. Notably, the GCE/MWPPy/ZnS sensor was endowed with promising DNA hybrid selection with a minimum concentration response of 1.0 × 10^-18 M. The corresponding detection limit was, respectively, found to be 2.90 × 10^-11 and 7.73 × 10^-21 M for MWPPy/ZnO- and MWPPy/ZnS-based biosensors. Furthermore, reliable determination of single-base and two-base mismatched DNA are more attractive, which greatly supported the application of the constructed zinc-based nanohybrids for the detection of single nucleotide polymorphism in genetic diseases, biological infectious pathogens, or warning against bio-warfare agents.

Hydrothermal synthesis of ZnO nanostructures with controllable morphology change

Optimal synthesis parameters for hydrothermal growth of nine ZnO nanostructure morphologies as a durable, homogeneous coating have been determined.

Electrochemical-Based Biosensors on Different Zinc Oxide Nanostructures: A Review

Electrochemical biosensors have shown great potential in the medical diagnosis field. The performance of electrochemical biosensors depends on the sensing materials used. ZnO nanostructures play important roles as the active sites where biological events occur, subsequently defining the sensitivity and stability of the device. ZnO nanostructures have been synthesized into four different dimensional formations, which are zero dimensional (nanoparticles and quantum dots), one dimensional (nanorods, nanotubes, nanofibers, and nanowires), two dimensional (nanosheets, nanoflakes, nanodiscs, and nanowalls) and three dimensional (hollow spheres and nanoflowers). The zero-dimensional nanostructures could be utilized for creating more active sites with a larger surface area. Meanwhile, one-dimensional nanostructures provide a direct and stable pathway for rapid electron transport. Two-dimensional nanostructures possess a unique polar surface for enhancing the immobilization process. Finally, three-dimensional nanostructures create extra surface area because of their geometric volume. The sensing performance of each of these morphologies toward the bio-analyte level makes ZnO nanostructures a suitable candidate to be applied as active sites in electrochemical biosensors for medical diagnostic purposes. This review highlights recent advances in various dimensions of ZnO nanostructures towards electrochemical biosensor applications.

Novel ZnO/N-halamine-Mediated Multifunctional Dressings as Quick Antibacterial Agent for Biomedical Applications

Cutaneous hemorrhage often occurs in daily life which may cause infection and even amputation. This research aims to develop a novel chitosan dressing impregnated with ZnO/N-halamine hybrid nanoparticles for quick antibacterial performance, outstanding hemostatic potential, high porosity, and favorable swelling property through combining sonication and lyophilization processing. After 30 days of storage, about 90% bacterial cell viability loss could be observed toward both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli O157:H7 within 30 min of contact by colony counting method. The hybrids assembled much more platelet and red blood cell as compared with pure chitosan control. Moreover, the lower blooding clotting index value gave evidence that these composites could control hemorrhaging and reduce the probability of wound infection. No potential skin irritation and toxicity were detected using in vitro cytocompatibility and a skin stimulation test. Therefore, this work demonstrated a facile and cost-effective approach for the preparation of N-halamine-based hybrid sponges which show promising application for wound dressings.

ZnO-based nanostructured electrodes for electrochemical sensors and biosensors in biomedical applications

Fascinating properties of ZnO nanostructures have created much interest due to their importance in health care and environmental monitoring. Current worldwide production and their wide range of applications signify ZnO to be a representative of multi-functional oxide material. Recent nanotechnological developments have stimulated the production of various forms of ZnO nanostructures such as nano-layers, nanoparticles, nanowires, etc. Due to their enhanced sensing properties, improved binding ability with biomolecules as well as biological activities have enabled them as suitable candidates for the fabrication of biosensor devices in the biomedical arena. In this review, the synthesis of ZnO nanostructures, mechanism of their interaction with biomolecules and their applications as sensors in health care area are discussed considering the biosensors for molecules with small molecular weight, infectious diseases, and pharmaceutical compounds.

Rapid electrochemical device for single-drop point-of-use screening of parathyroid hormone

Aim: Novel electrochemical point-of-use biosensing device for rapid assessment of parathyroid hormone (PTH) levels has been developed. Materials & methods: The analytical nanobiosensor was designed by integrating unique high density semiconducting nanostructured arrays on a flexible sensing surface. Surface modification technique was tailored for enhancing the interaction of nanostructure–biological interface to capture the target PTH level. Results & conclusion: We demonstrate a rapid nanobiosensor to detect PTH in human serum, plasma and whole blood with a limit of detection of 1 pg/ml and a clinically relevant dynamic range from 1 to 1000 pg/ml. This is the first demonstration of detecting PTH as a point-of-use device devoid of sample pretreatment suitable in a surgical setting with high specificity to PTH.

Metal oxide modified ZnO nanomaterials for biosensor applications

Advancing as a biosensing nanotechnology, nanohybrids present a new class of functional materials with high selectivity and sensitivity, enabling integration of nanoscale chemical/biological interactions with biomedical devices. The unique properties of ZnO combined with metal oxide nanostructures were recently demonstrated to be an efficient approach for sensor device fabrication with accurate, real-time and high-throughput biosensing, creating new avenues for diagnosis, disease management and therapeutics. This review article collates recent advances in the modified ZnO nanostructured metal oxide nanohybrids for efficient enzymatic and non-enzymatic biosensor applications. Furthermore, we also discussed future prospects for nanohybrid materials to yield high-performance biosensor devices.

Development of MoSe₂ Nano-Urchins as a Sensing Platform for a Selective Bio-Capturing of Escherichia. coli Shiga Toxin DNA

The present study was aimed to develop "fluorine doped" tin oxide glass electrode with a MoSe2 nano-urchin based electrochemical biosensor for detection of Escherichia. coli Shiga toxin DNA. The study comprises two conductive electrodes, and the working electrodes were drop deposited using MoSe2 nano-urchin, and DNA sequences specific to Shiga toxin Escherichia. coli. Morphological characterizations were performed using Fourier transforms infrared spectrophotometer; X-ray diffraction technique and scanning electron microscopy. All measurements were done using methylene blue as an electrochemical indicator. The proposed electrochemical geno-sensor showed good linear detection range of 1 fM⁻100 μM with a low detection limit of 1 fM where the current response increased linearly with Escherichia. coli Shiga toxin dsDNA concentration with R2 = 0.99. Additionally, the real sample was spiked with the dsDNA that shows insignificant interference. The results revealed that the developed sensing platform significantly improved the sensitivity and can provide a promising platform for effective detection of biomolecules using minute samples due to its stability and sensitivity.

Reduced graphene oxide nanoribbon immobilized gold nanoparticle based electrochemical DNA biosensor for the detection of Mycobacterium tuberculosis

Tuberculosis is one of the most dreadful diseases caused by Mycobacterium tuberculosis with more than 9 million individuals suffering from it in 2014. Traditional methods of detection are not efficient enough for its quick and reliable detection; therefore, it is imperative to develop methods of its detection in the early stages. Consequently, we report a highly sensitive and selective biosensor for detection of Mycobacterium tuberculosis. In this work, gold nanoparticles (AuNPs, dia. ∼6 nm, 1.81 wt% loading) are immobilized over reduced graphene oxide nanoribbons (RGONRs). An ssDNA/Au/RGONR electrode is prepared by immobilizing Au nanoparticles followed by covalent modification of Au nanoparticles with 5'SH-ssDNA. As per the best knowledge of the authors, the target DNA of Mycobacterium tuberculosis is detected using a ssDNA/Au/RGONR bioelectrode by cyclic voltammetry and chronoamperometric methods for the first time. With high detection efficiency (0.1 fM), the ssDNA/Au/RGONR bioelectrode exhibited better signal amplification and electrochemical response as compared to bare Au and RGONR electrodes. Additionally, the ssDNA/Au/RGONR bioelectrode displayed good linear response to different concentrations of target M. tuberculosis DNA. The ssDNA/Au/RGONR has shown excellent specificity (92%) to Mycobacterium tuberculosis target DNA as compared with non-complementary DNA. The Au/RGONR matrix has the potential to be used as an immobilization platform for single-stranded probe DNAs of different diseases other than tuberculosis reported here.

Fluorescent ZnO-Au Nanocomposite as a Probe for Elucidating Specificity in DNA Interaction

In this work, we report the interaction of a fluorescent ZnO-Au nanocomposite with deoxyribonucleic acid (DNA), leading to AT-specific DNA interaction, which is hitherto not known. For this study, three natural double-stranded (ds) DNAs having different AT:GC compositions were chosen and a ZnO-Au nanocomposite has been synthesized by anchoring a glutathione-protected gold nanocluster on the surface of egg-shell-membrane (ESM)-based ZnO nanoparticles. The ESM-based bare ZnO nanoparticles did not show any selective interaction toward DNA, whereas intrinsic fluorescence of the ZnO-Au nanocomposite shows an appreciable blue shift (Δλ_max = 18 nm) in the luminescence wavelength of 520 nm in the presence of ds calf thymus (CT) DNA over other studied DNAs. In addition, the interaction of the nanocomposite through fluorescence studies with single-stranded (ss) CT DNA, synthetic polynucleotides, and nucleobases/nucleotides (adenine, thymine, deoxythymidine monophosphate, deoxyadenosine monophosphate) was also undertaken to delineate the specificity in interaction. A minor blue shift (Δλ_max = 5 nm) in the emission wavelength at 520 nm was observed for single-stranded CT DNA, suggesting the proficiency of the nanocomposite for discriminating ss and ds CT DNA. More importantly, fluorescence signals from the nano-bio-interaction could be measured directly without any modification of the target, which is the foremost advantage emanated from this study compared with other previous reports. The AT base-pair-induced enhancement was also found to be highest for the melting temperature of CT DNA (ΔT_mCT = 6.7 °C). Furthermore, spectropolarimetric experiments followed by calorimetric analysis provided evidence for specificity in AT-rich DNA interaction. This study would lead to establish the fluorescent ZnO-Au nanocomposite as a probe for nanomaterial-based DNA-binding study, featuring its specific interaction toward AT-rich DNA.

Detection of chikungunya virus DNA using two-dimensional MoS2 nanosheets based disposable biosensor

Development of platforms for a reliable, rapid, sensitive and selective detection of chikungunya virus (CHIGV) is the need of the hour in developing countries. To the best of our knowledge, there are no reports available for the electrochemical detection of CHIGVDNA. Therefore, we aim at developing a biosensor based on molybdenum disulphide nanosheets (MoS₂ NSs) for the point-of-care diagnosis of CHIGV. Briefly, MoS₂ NSs were synthesized by chemical route and characterized using scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, Raman spectroscopy and X-Ray Diffraction. MoS₂ NSs were then subjected to physical adsorption onto the screen printed gold electrodes (SPGEs) and then employed for the detection of CHIGV DNA using electrochemical voltammetric techniques. Herein, the role of MoS₂ NSs is to provide biocompatibility to the biological recognition element on the surface of the screen printed electrodes. The detection strategy employed herein is the ability of methylene blue to interact differentially with the guanine bases of the single and double-stranded DNA which leads to change in the magnitude of the voltammetric signal. The proposed genosensor exhibited a wide linear range of 0.1 nM to 100 µM towards the chikungunya virus DNA.

Evaluation of carbon nanotube based copper nanoparticle composite for the efficient detection of agroviruses

We report a biosensor that combines the construction of a three-dimensional nanocomposite with electrochemical methods for the detection of viruses in plants. This is the first report, where carbon nanotubes are used as a conductive frame to anchor highly electrolytic agglomerates of copper nanoparticles to detect agroviruses. Morphological analysis of nanocomposite revealed the presence of carbon nanotubes having a diameter of 50-100nm with copper nanoparticles of 20-100nm, attached in the form of bunches. This material was applied to assess the infection caused by geminiviruses which are a major threat to the cotton plants in Asian and African countries. The hybridization events were studied by monitoring differential pulse voltammetry signals using methylene blue as a redox indicator. In the presence of target DNA, sensor signals decreased from 7×10^-4 to 1×10^-4Ampere. The probe exhibited 97.14% selectivity and the detection limit was found to be 0.01ngμL^-1. The developed biosensor is stable for at least four weeks, losing only 4.3% of the initial signal value. This sensor was able to detect the presence of viruses in sap extracted from cotton leaves, thus providing a promising platform to detect a range of other crops-infecting viruses.

Chitosan stabilized gold nanoparticle mediated self-assembled gliP nanobiosensor for diagnosis of Invasive Aspergillosis

Diagnosis of Invasive Aspergillosis (IA) casused by Aspergillus fumigatus in miniaturized setting is challenging with great importance in human health. In this direction, we have designed a sensitive electrochemical nanobiosensor for diagnosis of IA through detecting the virulent glip target gene (glip-T) in a miniaturized experimetal setting. The sensor probe was fabricated using 1,6-Hexanedithiol and chitosan stabilized gold nanoparticle mediated self-assembly of glip probes (glip-P) on gold electrode. It was characterized by UV-visible spectroscopy, cyclic voltametry and electrochemical impedance spectroscopy. The ability of sensor to detect glip-T was analysed based on the hybridyzation reaction and the signal obtained using toluidine blue as indicator molecule. Analytical parameters were optimized in terms of glip-P concentration, temperature, reaction time, and concentration of toluidine blue. The biosensor showed the dynamic range between 1 × 10^-14- 1 × 10^-2 M with the detection limit of 0.32 ± 0.01 × 10^-14(RSD < 5.2%). The regeneration of biosensor was evaluated and the interference due to non-target oligonucleotide sequences was evaluated individualy as well as in mixed sample to validate the high selectivity of the designed sensor. The stability of the designed sensor was examined and practical applicability of biosensor was tested by detecting glip-T in real sample environment.

Nonlithographic Fabrication of Plastic-Based Nanofibers Integrated Microfluidic Biochip for Sensitive Detection of Infectious Biomarker

We report fabrication of a fully integrated plastic based microfluidic biochip for biosensing application. The microfluidic channels were fabricated by tune transfer method and integrated with the prefunctionalized sensing platform. This approach to assembling microchannels into prefunctionalized sensing substrate facilitates controlled functionalization and prevents damages on the functionalized surface. The sensing platform comprised a three-electrode system, in which the sensing electrode was integrated with antibody immobilized carbon nanotubes-zinc oxide (C-ZnO) nanofibers. Electrospinning technique was used to synthesize C-ZnO nanofibers and the surface of the nanofibers was covalently conjugated with histidine rich protein II antibodies (AntiHRP II) toward detection of infectious malarial specific antigen, namely histidine-rich protein II (HRP II). The analytical performance of the fabricated biochip was evaluated by differential pulse voltammetry method. The device exhibited a high sensitivity of 1.19 mA/((g mL^-1)/cm²) over a wide detection range (10 fg/mL to 100 μg/mL) with a low detection limit of 7.5 fg/mL toward HRP II detection. This fully integrated biochip offers a promising cost-effective approach for detection of several other infectious disease biomarkers.

Gold-Gilded Zinc Oxide Nanodiamonds: Plasmonic and Morphological Effects

The novel properties, diverse applications and device performance of nanocomposites can be greatly modulated through astute combination of plasmonic and morphological effects. The biosensing sensitivity, semiconducting capability, photocatalytic efficiency and antibacterial efficacy of ZnO nanostructures can be enhanced by a diamond-like morphology of ZnO via incorporation of plasmonic gold owing to their exceptional specific surface area, outstanding photoluminescence and excellent biocompatibility. Toward the realization of this goal, Au-Zno nanodiamonds have been successfully synthesized by a microwave assisted solution phase route without use of any costly solvents, surfactants, substrates, post-synthesis treatment or hazardous ingredients. It shows the ability to control the concentration of Au nanoparticles in ZnO and the evolution of its growth in diamond shape. The synthesized nanocomposites were characterized by high-resolution measurements such as transmission electron microscopy (TEM), diffused reflectance spectroscopy (DRS), energy dispersive X-ray spectroscopy (EDX), X-ray diffractometory (XRD), Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR), and the results discussed in detail.

Facile, high yield ultrasound mediated protocol for ZnO hierarchical structures synthesis: Formation mechanism, optical and photocatalytic properties

Hierarchical flowers-like zinc oxide structures have been successfully obtained by a simple and fast ultrasound-assisted method performed in a ordinary ultrasonic bath using an ammonia solution and zinc acetate, in the absence of any surfactant or template. The composition, structure, crystallinity, morphology and optical properties of the materials obtained at different ultrasound irradiation times were characterized by infrared, UV-Vis and photoluminescence spectroscopy, X-ray diffraction, scanning and transmission electron microscopy investigations. It was proved that the ultrasound irradiation time manipulates both the defect content (implicit the photoluminescent properties) and morphology of the ZnO materials: shorter irradiation times leads to the synthesis of high-defected ZnO structures of flower morphology with triangular-shaped petals, while higher irradiation times favours the formation of low-defected ZnO structures with tipped rod-like petals. A plausible growth mechanism of the architectures that implies aggregation via oriented attachment followed by an Ostwald ripening is advanced based on these results. The ZnO flower-like structures present high photocatalytic activities, a total phenol mineralization being registered in the case of visible light experiments. Electron-spin resonance measurements demonstrate the generation of reactive oxygen species, namely hydroxyl radicals but also C centred radicals adducts derived most probable from the residual acetate adsorbed on ZnO surface.

A multi-walled carbon nanotube–zinc oxide nanofiber based flexible chemiresistive biosensor for malaria biomarker detection

A flexible, lightweight and disposable chemiresistive biosensor for label free detection of the malaria biomarker.

Bioanalytical system for detection of cancer cells with photoluminescent ZnO nanorods

Using photoluminescent ZnO nanorods and carbohydrate marker SSEA-4, a novel cancer cell recognition system was developed. Immobilization of SSEA-4 antibodies (αSSEA-4) on ZnO nanorods was performed in buffer solution (pH = 7.1) over 2 h. The cancer cell line probes were fixed on the glass slide. One hundred microliters of ZnO-αSSEA-4 conjugates were deposited on the cell probe and exposed for 30 min. After washing photoluminescence spectra were recorded. Based on the developed methodology, ZnO-αSSEA-4 probes were tested on patient-derived breast and colorectal carcinoma cells. Our data clearly show that the carbohydrate SSEA-4 molecule is expressed on cancer cell lines and patient-derived cancer cells. Moreover, SSEA-4 targeted ZnO nanorods bind to the patient-derived cancer cells with high selectivity and the photoluminescence signal increased tremendously compared to the signal from the control samples. Furthermore, the photoluminescence intensity increase correlated with the extent of malignancy in the target cell population. A novel portable bioanalytical system, based on optical ZnO nanorods and fiber optic detection system was developed. We propose that carbohydrate SSEA-4 specific ZnO nanorods could be used for the development of cancer diagnostic biosensors and for targeted therapy.