Biosensors for determination of D and L- amino acids: A review

D-Peptide cell culture scaffolds with enhanced antibacterial and controllable release properties

The development of peptide-based hydrogels characterized by both high biostability and potent antimicrobial activity, aimed at combating multidrug-resistant bacterial infections and providing scaffolds for cell cultures, continues to pose a significant challenge. The susceptibility of antimicrobial peptides (AMPs) to degradation by cations, serum, and proteases restricted their applications in clinical environments. In this study, we designed a peptide sequence (termed D-IK1) entirely consisting of D-amino acids, an enantiomer of a previously reported AMP IK1. Our results demonstrated remarkably improved antibacterial and anticancer activities of D-IK1 as compared to IK1. D-IK1 self-assembled into hydrogels that effectively inhibited bacterial and cancer cell growth by the controlled and sustained release of D-IK1. Importantly, D-IK1 was extremely stable in salt solutions and resisted serum and protease degradation. In addition, the D-IK1 hydrogel fostered cell adhesion and proliferation, proving its viability as a 3D scaffold for cell culture applications. Our research presents a versatile, highly stable antibacterial hydrogel scaffold with potential widespread applications in cell culture, wound healing, and the eradication of multidrug-resistant bacterial infections.

Label-free colorimetric analysis strategies based on adsorption-responsive surface-enhanced photochromic phenomena of tungsten(VI) oxide nanoparticles for amino acids

Herein, we present a colorimetric detection method based on the surface-enhanced photochromic phenomenon of tungsten (VI) oxide (WO3) nanocolloid particles for α-amino acid (AA) molecules, including L-aspartic acid (Asp), L-glutamic acid (Glu), L-histidine (His), L-isoleucine (Ile), L-leucine (Leu), L-lysine (Lys), L-phenylalanine (Phe), and L-valine (Val). The UV-induced photochromic phenomena in the AA/WO3 binary aqueous systems were investigated using UV-Vis absorption spectrometry. The adsorption properties of the AA molecules on the surface of the WO3 nanocolloid particles have been identified using a combination of adsorption isotherm analysis and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A good linear correlation between the concentration of the AAs adsorbed on the surface of the WO3 nanocolloid particles and the initial photochromic coloration rate in the corresponding UV-irradiated WO3 colloidal aqueous solution was obtained with over three orders of magnitude, indicating that the surface-enhanced photochromic phenomenon of the WO3 nanocolloid particle can be used to detect the AA molecules. In addition, based on the results of the UV-Vis absorption, ATR-FTIR, and adsorption isotherm analyses, we have experimentally demonstrated that the AA/WO3 binary aqueous system with inner-sphere adsorbed Ile, Leu, Lys, or Val molecules on the surface of the WO3 nanocolloid particles exhibits a more significant surface-enhanced photochromic phenomenon than the system with outer-sphere adsorbed Asp, Glu, His, or Phe molecules. The strong inner-sphere adsorption of the AA molecules successfully improved the limit of detection. This study provides valuable insights into a "label-free" colorimetric assay system based on the surface-enhanced photochromic phenomenon of the WO3 nanocolloid probe.

Macromolecule-Nanoparticle-Based Hybrid Materials for Biosensor Applications

Biosensors function as sophisticated devices, converting biochemical reactions into electrical signals. Contemporary emphasis on developing biosensor devices with refined sensitivity and selectivity is critical due to their extensive functional capabilities. However, a significant challenge lies in the binding affinity of biosensors to biomolecules, requiring adept conversion and amplification of interactions into various signal modalities like electrical, optical, gravimetric, and electrochemical outputs. Overcoming challenges associated with sensitivity, detection limits, response time, reproducibility, and stability is essential for efficient biosensor creation. The central aspect of the fabrication of any biosensor is focused towards forming an effective interface between the analyte electrode which significantly influences the overall biosensor quality. Polymers and macromolecular systems are favored for their distinct properties and versatile applications. Enhancing the properties and conductivity of these systems can be achieved through incorporating nanoparticles or carbonaceous moieties. Hybrid composite materials, possessing a unique combination of attributes like advanced sensitivity, selectivity, thermal stability, mechanical flexibility, biocompatibility, and tunable electrical properties, emerge as promising candidates for biosensor applications. In addition, this approach enhances the electrochemical response, signal amplification, and stability of fabricated biosensors, contributing to their effectiveness. This review predominantly explores recent advancements in utilizing macrocyclic and macromolecular conjugated systems, such as phthalocyanines, porphyrins, polymers, etc. and their hybrids, with a specific focus on signal amplification in biosensors. It comprehensively covers synthetic strategies, properties, working mechanisms, and the potential of these systems for detecting biomolecules like glucose, hydrogen peroxide, uric acid, ascorbic acid, dopamine, cholesterol, amino acids, and cancer cells. Furthermore, this review delves into the progress made, elucidating the mechanisms responsible for signal amplification. The Conclusion addresses the challenges and future directions of macromolecule-based hybrids in biosensor applications, providing a concise overview of this evolving field. The narrative emphasizes the importance of biosensor technology advancement, illustrating the role of smart design and material enhancement in improving performance across various domains.

Engineering the Signal Resolution of a Paper-Based Cell-Free Glutamine Biosensor with Genetic Engineering, Metabolic Engineering, and Process Optimization

Specialized cancer treatments have the potential to exploit glutamine dependence to increase patient survival rates. Glutamine diagnostics capable of tracking a patient's response to treatment would enable a personalized treatment dosage to optimize the tradeoff between treatment success and dangerous side effects. Current clinical glutamine testing requires sophisticated and expensive lab-based tests, which are not broadly available on a frequent, individualized basis. To address the need for a low-cost, portable glutamine diagnostic, this work engineers a cell-free glutamine biosensor to overcome assay background and signal-to-noise limitations evident in previously reported studies. The findings from this work culminate in the development of a shelf-stable, paper-based, colorimetric glutamine test with a high signal strength and a high signal-to-background ratio for dramatically improved signal resolution. While the engineered glutamine test is important progress towards improving the management of cancer and other health conditions, this work also expands the assay development field of the promising cell-free biosensing platform, which can facilitate the low-cost detection of a broad variety of target molecules with high clinical value.

A Review from a Clinical Perspective: Recent Advances in Biosensors for the Detection of L-Amino Acids

The field of biosensors is filled with reports and designs of various sensors, with the vast majority focusing on glucose sensing. However, in addition to glucose, there are many other important analytes that are worth investigating as well. In particular, L-amino acids appear as important diagnostic markers for a number of conditions. However, the progress in L-amino acid detection and the development of biosensors for L-amino acids are still somewhat insufficient. In recent years, the need to determine L-amino acids from clinical samples has risen. More clinical data appear to demonstrate that abnormal concentrations of L-amino acids are related to various clinical conditions such as inherited metabolic disorders, dyslipidemia, type 2 diabetes, muscle damage, etc. However, to this day, the diagnostic potential of L-amino acids is not yet fully established. Most likely, this is because of the difficulties in measuring L-amino acids, especially in human blood. In this review article, we extensively investigate the 'overlooked' L-amino acids. We review typical levels of amino acids present in human blood and broadly survey the importance of L-amino acids in most common conditions which can be monitored or diagnosed from changes in L-amino acids present in human blood. We also provide an overview of recent biosensors for L-amino acid monitoring and their advantages and disadvantages, with some other alternative methods for L-amino acid quantification, and finally we outline future perspectives related to the development of biosensing devices for L-amino acid monitoring.

A pH-Stable Tb-MOF as Luminescence Sensor for Highly Sensitive Detection of Amino Acids through Diverse Sensing Mechanism

A luminescent Tb-MOF with excellent stability and dual-emitting properties was constructed with an amide-functionalized tetracarboxylate ligand. Tb-MOFs were initially assembled on one-dimensional Tb3+ chains, then formed a two-dimensional double-decker layer through the synergistic linking of organic ligands and bridging formic acid anions, and further fabricated the final three-dimensional structure through the connection of the organic ligands. Powder X-ray diffraction experiments revealed that Tb-MOFs not only exhibited excellent stability in water but also maintained structural integrity in the pH range of 2-12. Importantly, this Tb-MOF provided the first example of a metal-organic framework (MOF)-based luminescence sensor that can simultaneously detect two acid amino acids (aspartic and glutamic acids) through a turn-off sensing mechanism and two basic amino acids (lysine and arginine acids) through unusual turn-on and turn-off-on sensing mechanisms. Moreover, high sensitivity, low detection limit, and excellent recyclability of this sensor endow Tb-MOFs with great potential as a highly efficient amino acid fluorescence sensor in chemical detection and biological environments.

The Antimicrobial, Hemostatic, and Anti-Adhesion Effects of a Peptide Hydrogel Constructed by the All-d-Enantiomer of Antimicrobial Peptide Jelleine-1

Peptide hydrogels are believed to be potential biomaterials with wide application in the biomedical field because of their good biocompatibility, injectability, and 3D printability. Most of the previously reported polypeptide hydrogels are composed of l-peptides, while the hydrogels formed by self-assembly of d-peptides are rarely reported. Herein, a peptide hydrogel constructed by D-J-1, which is the all-d-enantiomer of antimicrobial peptide Jelleine-1 (J-1) is reported. Field emission scanning electron microscope (FE-SEM) and rheologic study are performed to characterize the hydrogel. Antimicrobial, hemostatic, and anti-adhesion studies are carried out to evaluate its biofunction. The results show that D-J-1 hydrogel is formed by self-assembly and cross-linking driven by hydrogen bonding, hydrophobic interaction, and π-π stacking force of aromatic ring in the structure of D-J-1. It exhibits promising antimicrobial activity, hemostatic activity, and anti-adhesion efficiency in a rat sidewall defect-cecum abrasion model. In addition, it also exhibits good biocompatibility. Notably, D-J-1 hydrogel shows improved in vitro and in vivo stability when compared with its l-enantiomer J-1 hydrogel. Therefore, the present study will provide new insight into the application of d-peptide hydrogel, and provides a new peptide hydrogel with antibacterial, hemostatic, and anti-adhesion efficacy for clinical use.

The biological functions and metabolic pathways of valine in swine

Valine is an essential amino acid and a type of branched-chain amino acid. Due to the involvement of branched-chain amino acids in various metabolic pathways, there has been a surge of interests in valine nutrition and its role in animal physiology. In pigs, the interactions between valine and other branched-chain amino acids or aromatic amino acids are complex. In this review, we delve into the interaction mechanism, metabolic pathways, and biological functions of valine. Appropriate valine supplementation not only enhances growth and reproductive performances, but also modulates gut microbiota and immune functions. Based on past observations and interpretations, we provide recommended feed levels of valine for weaned piglets, growing pigs, gilts, lactating sows, barrows and entire males. The summarized valine nutrient requirements for pigs at different stages offer valuable insights for future research and practical applications in animal husbandry.

Immobilization of Enzyme Electrochemical Biosensors and Their Application to Food Bioprocess Monitoring

Electrochemical biosensors based on immobilized enzymes are among the most popular and commercially successful biosensors. The literature in this field suggests that modification of electrodes with nanomaterials is an excellent method for enzyme immobilization, which can greatly improve the stability and sensitivity of the sensor. However, the poor stability, weak reproducibility, and limited lifetime of the enzyme itself still limit the requirements for the development of enzyme electrochemical biosensors for food production process monitoring. Therefore, constructing sensing technologies based on enzyme electrochemical biosensors remains a great challenge. This article outlines the construction principles of four generations of enzyme electrochemical biosensors and discusses the applications of single-enzyme systems, multi-enzyme systems, and nano-enzyme systems developed based on these principles. The article further describes methods to improve enzyme immobilization by combining different types of nanomaterials such as metals and their oxides, graphene-related materials, metal-organic frameworks, carbon nanotubes, and conducting polymers. In addition, the article highlights the challenges and future trends of enzyme electrochemical biosensors, providing theoretical support and future perspectives for further research and development of high-performance enzyme chemical biosensors.

Wavelength-shift-based visual fluorescence sensing of aspartic acids using Eu/Gd-MOF through pH triggering

With the increasing demand for on-site detection, the current approach of building dual-emission or multi-emission luminescence sensors based on metal-organic frameworks (MOFs) which possess the capacity of self-reference for numerous non-analyte factors falls short of meeting sensing requirements. Therefore, we have designed a novel strategy for constructing wavelength shift-based luminescence sensor named Eu/Gd(TCPP), which exhibits dual-emitting from metal ions Eu³⁺ and flexible rotating aggregation-induced emission (AIE) ligands H₄TCPP (2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine). This sensor was prepared by a simple, green and fast plasma synthesis method. It's worth noting that the fluorescence emission of Eu/Gd(TCPP) shows a specific wavelength shift from ligand peak, and a visual color change from red to blue within a pH range of 4 to 3. Moreover, various characterization data verified that the luminescence switching mechanism of Eu/Gd(TCPP) was attributed to the H⁺-induced collapse of the Eu/Gd(TCPP) crystal structure, followed by untwisting of free ligands that lose rigid MOFs confinement. This hindered the antenna effect from H₄TCPP to Ln³⁺ ions and restricted the rotation emission of ligand, resulting in the red-shifting of the ligand emission and corresponding luminescence switching. By tactfully utilizing the short-range pH response property of Eu/Gd(TCPP), highly sensitive and selective on-site visual detection of acidic aspartic acid can be achieved.

Terahertz spectroscopy for quantitatively elucidating the crystal transformation of chiral histidine enantiomers to racemic compounds

d-Histidine (d-His), l-Histidine (l-His), and their racemic compound dl-Histidine (dl-His) have different stereo chirality, making them intrinsic diverse functionalities to the living system. Identifying the configuration and crystal structures of enantiomers and the racemic compound is always the foremost requirement in processing protein foods. Although these features can be analyzed by spectroscopic technologies individually, it remains challenging to incorporate these complex methods into a facile analytical strategy. Herein, we propose a terahertz spectroscopy with solid-state density functional theory to both distinguish the configurational difference and quantify the crystal transformation from l-His and d-His to dl-His. By comparison with X-ray diffraction analysis, the validity of the crystal transformation evaluation based on terahertz spectroscopy is verified. A normalized fitting line regarding the terahertz absorption frequency and intensity is calculated to quantitatively elucidate the crystal transformation from enantiomers to dl-His. Our findings provide a new analytical approach to the research on food chemistry.

Nanomaterial-based electrochemical sensors for detection of amino acids

Amino acids are the building blocks of proteins and muscle tissue. They also play a significant role in physiological processes related to energy, recovery, mood, muscle and brain function, fat burning and stimulating growth hormone or insulin secretion. Accurate determination of amino acids in biological fluids is necessary because any changes in their normal ranges in the body warn diseases like kidney disease, liver disease, type 2 diabetes and cancer. To date, many methods such as liquid chromatography, fluorescence mass spectrometry, etc. have been used for the determination of amino acids. Compared with the above techniques, electrochemical systems using modified electrodes offer a rapid, accurate, cheap, real-time analytical path through simple operations with high selectivity and sensitivity. Nanomaterials have found many interests to create smart electrochemical sensors in different application fields e.g. biomedical, environmental, and food analysis because of their exceptional properties. This review summarizes recent advances in the development of nanomaterial-based electrochemical sensors in 2017-2022 for the detection of amino acids in various matrices such as serum, urine, blood and pharmaceuticals.

On-chip microfluidic dual detection of amino acid metabolism disorders using cell-free protein synthesis

Various metabolic diseases are associated with the accumulation of specific amino acids due to abnormal metabolic pathways, and thus can be diagnosed by measuring the level of amino acids in body fluids. However, present methods for amino acid analysis are not readily accessible because they require a complex experimental setup, expensive equipment, and a long processing time. Here, we present a dual sensing microfluidic device that enables fast, portable, and quantitative analysis of target amino acids, harnessing the biological mechanism of protein synthesis. In this device, the working principle of a finger-actuated pumping unit is applied, and the microchannels are designed to perform cell-free synthesis of a reporter protein in response to the target amino acids in the assay samples. Multiple steps required for the translational assay are controlled by the simple operation of two pushbuttons on the device. It is demonstrated that the developed microfluidic device provides precise quantification of two amino acids (methionine and phenylalanine) within 30 min at room temperature. We expect that the application of the presented device can be readily extended to the point-of-care testing of other metabolic compounds.

Integrating Microfluidics and Electronics in Point-of-Care Diagnostics: Current and Future Challenges

Point-of-Care (POC) diagnostics have gained increasing attention in recent years due to its numerous advantages over conventional diagnostic approaches. As proven during the recent COVID-19 pandemic, the rapidity and portability of POC testing improves the efficiency of healthcare services and reduces the burden on healthcare providers. There are hundreds of thousands of different applications for POC diagnostics, however, the ultimate requirement for the test is the same: sample-in and result-out. Many technologies have been implemented, such as microfluidics, semiconductors, and nanostructure, to achieve this end. The development of even more powerful POC systems was also enabled by merging multiple technologies into the same system. One successful example is the integration of microfluidics and electronics in POC diagnostics, which has simplified the sample handling process, reduced sample usage, and reduced the cost of the test. This review will analyze the current development of the POC diagnostic systems with the integration of microfluidics and electronics and discuss the future challenges and perspectives that researchers might have.

A Road Map toward Field-Effect Transistor Biosensor Technology for Early Stage Cancer Detection

Field effect transistor (FET)-based nanoelectronic biosensor devices provide a viable route for specific and sensitive detection of cancer biomarkers, which can be used for early stage cancer detection, monitoring the progress of the disease, and evaluating the effectiveness of therapies. On the road to implementation of FET-based devices in cancer diagnostics, several key issues need to be addressed: sensitivity, selectivity, operational conditions, anti-interference, reusability, reproducibility, disposability, large-scale production, and economic viability. To address these well-known issues, significant research efforts have been made recently. An overview of these efforts is provided here, highlighting the approaches and strategies presently engaged at each developmental stage, from the design and fabrication of devices to performance evaluation and data analysis. Specifically, this review discusses the multistep fabrication of FETs, choice of bioreceptors for relevant biomarkers, operational conditions, measurement configuration, and outlines strategies to improve the sensing performance and reach the level required for clinical applications. Finally, this review outlines the expected progress to the future generation of FET-based diagnostic devices and discusses their potential for detection of cancer biomarkers as well as biomarkers of other noncommunicable and communicable diseases.

A New Electrochemical Method to Determine Tryptophan in Fruit Juices: Development and Validation

Tryptophan (Trp) is an essential amino acid usually found in fruit juices. Its determination is necessary for food companies because of its relation to human health. In this work, a new electrochemical method based on sonogel–carbon electrodes (SNGCEs) was developed and validated using an ultra performance liquid chromatography (UPLC) method as a reference method for the determination of Trp in fruit juices. Cyclic voltammetry (CV), chronoamperometry, and differential pulse voltammetry (DPV) techniques were applied to investigate the oxidation of Trp on a previously polarized SNGCE surface in a Britton–Robinson (BR) buffer solution at pH 3.6. The operating conditions for electroanalysis were optimized using a Box–Behnken design (BBD), obtaining an oxidation peak for Trp at 0.749 V. The linear range for this method was from 0.1 to 5 mg/L. The intraday and interday precision, expressed as a relative standard deviation (RSD), were 3.1% and 2.7%, respectively. The average recovery was 99.01%, and the limit of detection and quantitation were 0.33 and 1.09 mg/L, respectively. Therefore, from the quality analytical parameters obtained, it can be concluded that the new electrochemical method can be successfully used for the routine analysis of Trp in fruit juices. As far as we are concerned, this is the first time that a methodology for Trp determination was performed in this kind of real food matrices.

Integrated Bioinformatics Analysis of Serine Racemase as an Independent Prognostic Biomarker in Endometrial Cancer

Endometrial cancer (EC) kills about 76,000 women worldwide, with the highest incidence in industrialized countries. Because of the rise in disease mortality and new diagnoses, EC is now a top priority for women’s health. Serine racemase (SRR) is thought to play a role in the central nervous system, but its role in cancers, particularly in EC, is largely unknown. The current study starts with a pan-cancer examination of SRR’s expression and prognostic value before delving into SRR’s potential cancer-suppressing effect in patients with EC. SRR may affect the endometrial tumor immune microenvironment, according to subsequent immune-related analysis. SRR expression is also linked to several genes involved in specific pathways such as ferroptosis, N6-methyladenosine methylation, and DNA damage repair. Finally, we used the expression, correlation, and survival analyses to investigate the upstream potential regulatory non-coding RNAs of SRR. Overall, our findings highlight the prognostic significance of SRR in patients with EC, and we can formulate a reasonable hypothesis that SRR influences metabolism and obstructs key carcinogenic processes in EC.

A Racemic Naphthyl-Coumarin-Based Probe for Quantitative Enantiomeric Excess Analysis of Amino Acids and Enantioselective Sensing of Amines and Amino Alcohols

A new racemic naphthyl-coumarin-based probe was found to bind covalently with amino acids in MeOH-KOH system and thereby generates distinct CD responses. The induced strong CD signals allowed quantitative enantiomeric excess analysis of amino acids and enantioselective sensing of amines and amino alcohols. The mechanism for the reaction of the coumarin-aldehyde probe with an amino acid was investigated by CD, UV-Vis, NMR, ESI-MS analyses and ECD calculation.

Construction of an enzyme-based all-fiber SPR biosensor for detection of enantiomers

Chiral analysis of amino acids (AAs) is of great importance in medical science due to the distinctive effect of AA isomers on human health. Although various chiral recognition techniques have been developed, the quantitative chiral recognition of low-level AA isomers remains challenging. Here, we combined the fiber optic SPR with an enzyme-substrate recognition mechanism to construct a direct-assay-type chiral AA biosensor. As a proof-of-concept attempt, a recently discovered Rasamsonia emersonii D-amino acid oxidase (ReDAAO) with a wide substrate spectrum and high stability was immobilized on the graphene oxide and gold nanorods composites (GO-AuNRs), using both EDC/NHS coupling and the gold-binding peptide (GBP) method. Such a biosensor can distinguish two AA isomers at the same concentration. It achieved specific detection of D-amino acids (D-AAs) with a linear range from 5x10^-4 mM to 30 mM. Furthermore, it showed good resistance to enantiomeric interference. When the percentage of D-AA increases in the isomer mixture, a good linear relationship between the D/(D + L)-AA ratio and SPR spectral shift was obtained. This unique combination of the enzyme, nanocomposite, and SPR taps into the rich reservoir of proteins for chiral receptors. It lays the foundation for protein-based chiral recognition of other clinically important small molecules in future biosensor designs.

A Review of Sensors and Biosensors Modified with Conducting Polymers and Molecularly Imprinted Polymers Used in Electrochemical Detection of Amino Acids: Phenylalanine, Tyrosine, and Tryptophan

Recently, the studies on developing sensors and biosensors-with an obvious interdisciplinary character-have drawn the attention of many researchers specializing in various fundamental, but also complex domains such as chemistry, biochemistry, physics, biophysics, biology, bio-pharma-medicine, and bioengineering. Along these lines, the present paper is structured into three parts, and is aimed at synthesizing the most relevant studies on the construction and functioning of versatile devices, of electrochemical sensors and biosensors, respectively. The first part presents examples of the most representative scientific research focusing on the role and the importance of the phenylalanine, tyrosine, and tryptophan amino acids, selected depending on their chemical structure and their impact on the central nervous system. The second part is dedicated to presenting and exemplifying conductor polymers and molecularly imprinted polymers used as sensitive materials in achieving electrochemical sensors and biosensors. The last part of the review analyzes the sensors and biosensors developed so far to detect amino acids with the aid of conductor polymers and molecularly imprinted polymers from the point of view of the performances obtained, with emphasis on the detection methods, on the electrochemical reactions that take place upon detection, and on the electroanalytical performances. The present study was carried out with a view to highlighting, for the benefit of specialists in medicine and pharmacy, the possibility of achieving and purchasing efficient devices that might be used in the quality control of medicines, as well as in studying and monitoring diseases associated with these amino acids.

Highly selective detecting Aspartic acid, detecting Ornidazole and information encryption and decryption supported by a heterometallic anionic Cd (II)-K (I)-MOF

A highly stable heterometallic MOF, {[(Me₂NH₂)₂]·[Cd₂K₂(L)₂(H₂O)]}_n (H₄L = terphenyl-2, 2', 4, 4'-tetracarboxylic acid) (1), was synthesized. 1 featuring one-dimensional channels can efficiently detect Aspartic acid with a low limit of detection (LOD) value (2.5 μM). More interestingly, 1 can encapsulate Eu³⁺ and sensitize the visible-emitting characteristic fluorescence of Eu³⁺ in aqueous solution. Then, Eu³⁺@CdK-MOF is found to be an excellent fluorescence sensor for the detection of Ornidazole (ODZ) and the portable ODZ test paper is also successfully designed. Eu³⁺@CdK-MOF can also be used as fluorescent ink to write some words. The words can be hidden when treated with acid vapor and then the words can be restored when treated with alkaline vapor. More importantly, the hidden information can be read repeatedly. Therefore, this reversible light-emitting and reusable property have great potential for development in information encryption and decryption and information storage.

pH modulated luminescent switching and discriminative detection of amino acid based on metal-organic framework

The detection of glutamic (Glu) or aspartic (Asp) acids is vital for human nutrition and diagnosis of disease. Herein, the dht ligand containing hydroxy group (-OH) is used to design and synthesize a 2D luminescent [Cd₂(idc)(dht)(H₂O)₄] (1); H₂idc = 4,5-imidazoledicarboxylic acid and H₂dht = 2,5-dihydroxyterephthalic acid for sensing amino acids. The compound 1 can discriminatively detect Asp and Glu among other amino acids through blue-shifted emission (yellow → green). The dual sensing mechanism may be attributed to the intermolecular excited-state proton transfer between MOF and water to produce keto form along with the subsequent switching of keto form to enol form by protonation causing the increased band gap energy. This material can serve several benefits in terms of high selectivity, fast response (30s), good reproducibility and low LOD value of 11.34 μM which is less than the harmful concentration of Glu for human health (>400 μM). In addition, 1 shows the broad range detection of Glu covering in safe and unsafe levels. For on-site detection of Glu, MOF-based paper is devised and can be applied through color-scanning application in smartphone. Besides, this sensor can serve to detect Glu in real samples with good recovery.

Chirality and the Origin of Life

The origin of life, based on the homochirality of biomolecules, is a persistent mystery. Did life begin by using both forms of chirality, and then one of the forms disappeared? Or did the choice of homochirality precede the formation of biomolecules that could ensure replication and information transfer? Is the natural choice of L-amino acids and D-sugars on which life is based deterministic or random? Is the handedness present in/of the Universe from its beginning? The whole biosystem on the Earth, all living creatures are chiral. Many theories try to explain the origin of life and chirality on the Earth: e.g., the panspermia hypothesis, the primordial soup hypothesis, theory of parity violation in weak interactions. Additionally, heavy neutrinos and the impact of the fact that only left-handed particles decay, and even dark matter, all have to be considered.

D-Amino Acids and D-Amino Acid-Containing Peptides: Potential Disease Biomarkers and Therapeutic Targets?

In nature, amino acids are found in two forms, L and D enantiomers, except for glycine which does not have a chiral center. The change of one form to the other will lead to a change in the primary structure of proteins and hence may affect the function and biological activity of proteins. Indeed, several D-amino acid-containing peptides (DAACPs) were isolated from patients with cataracts, Alzheimer's and other diseases. Additionally, significant levels of free D-amino acids were found in several diseases, reflecting the disease conditions. Studying the molecular mechanisms of the DAACPs formation and the alteration in D-amino acids metabolism will certainly assist in understanding these diseases and finding new biomarkers and drug targets. In this review, the presence of DAACPs and free D-amino acids and their links with disease development and progress are summarized. Similarly, we highlight some recent advances in analytical techniques that led to improvement in the discovery and analysis of DAACPs and D-amino acids.

Enantiospecific Detection of D-Amino Acid through Synergistic Upconversion Energy Transfer

D-amino acids (DAAs) are indispensable in regulating diverse metabolic pathways. Selective and sensitive detection of DAAs is crucial for understanding the complexity of metabolic processes and managing associated diseases. However, current DAA detection strategies mainly rely on bulky instrumentation or electrochemical probes, limiting their cellular and animal applications. Here we report an enzyme-coupled nanoprobe that can detect enantiospecific DAAs through synergistic energy transfer. This nanoprobe offers near-infrared upconversion capability, a wide dynamic detection range, and a detection limit of 2.2 μM, providing a versatile platform for in vivo noninvasive detection of DAAs with high enantioselectivity. These results potentially allow real-time monitoring of biomolecular handedness in living animals, as well as developing antipsychotic treatment strategies.

A comprehensive review of methods for determination of l-lysine with detailed description of biosensors

l-lysine being one of the essential amino acids is not produced by the body, but is obtained through diet. l-lysine determination is important in the food and pharmaceutical industries as well as have medical and diagnostic applications. The normal l-lysine levels in a healthy human serum sample is 150 to 250 μmol/l. There is imbalance in l-lysine levels in certain diseased conditions. So, it could be a biomarker for diagnosis. Various basic methods are available for the determination of l-lysine such as colorimetric, radioisotope dilution, chromatographic, fluorometric and voltammetric methods. These methods have certain disadvantages like sample pretreatment, costly, time consuming and requirement of skilled personnel. These drawbacks are overcome by the use of biosensors due to their high sensitivity, stability and specificity. The present review article discusses about the principles, merits and demerits of the various analytic methods for determination of l-lysine with special emphasis on biosensors. l-lysine biosensors work ideally under the optimum pH 5 to 10, potential range -0.05 to 1.5 V, temperature 25 to 40 °C, with linear range 0.01 to 5500 μM, detection limit 0.000004 to 650 μM and response time 2 to 300 s. The sensor had storage stability between 14 and 200 days.

Strategies for Interfering With Bacterial Early Stage Biofilms

Biofilm-related bacteria show high resistance to antimicrobial treatments, posing a remarkable challenge to human health. Given bacterial dormancy and high expression of efflux pumps, persistent infections caused by mature biofilms are not easy to treat, thereby driving researchers toward the discovery of many anti-biofilm molecules that can intervene in early stage biofilms formation to inhibit further development and maturity. Compared with mature biofilms, early stage biofilms have fragile structures, vigorous metabolisms, and early attached bacteria are higher susceptibility to antimicrobials. Thus, removing biofilms at the early stage has evident advantages. Many reviews on anti-biofilm compounds that prevent biofilms formation have already been done, but most of them are based on compound classifications to introduce anti-biofilm effects. This review discusses the inhibitory effects of anti-biofilm compounds on early stage biofilms formation from the perspective of the mechanisms of action, including hindering reversible adhesion, reducing extracellular polymeric substances production, interfering in the quorum sensing, and modifying cyclic di-GMP. This information can be exploited further to help researchers in designing new molecules with anti-biofilm activity.

Copper and Nickel Microsensors Produced by Selective Laser Reductive Sintering for Non-Enzymatic Glucose Detection

In this work, the method of selective laser reductive sintering was used to fabricate the sensor-active copper and nickel microstructures on the surface of glass-ceramics suitable for non-enzymatic detection of glucose. The calculated sensitivities for these microsensors are 1110 and 2080 μA mM⁻¹·cm⁻² for copper and nickel, respectively. Linear regime of enzymeless glucose sensing is provided between 0.003 and 3 mM for copper and between 0.01 and 3 mM for nickel. Limits of glucose detection for these manufactured micropatterns are equal to 0.91 and 2.1 µM for copper and nickel, respectively. In addition, the fabricated materials demonstrate rather good selectivity, long-term stability and reproducibility.

Quantitative measurements of free and immobilized RgDAAO Michaelis-Menten constant using an electrochemical assay reveal the impact of covalent cross-linking on substrate specificity

Challenges facing enzyme-based electrochemical sensors include substrate specificity, batch to batch reproducibility, and lack of quantitative metrics related to the effect of enzyme immobilization. We present a quick, simple, and general approach for measuring the effect of immobilization and cross-linking on enzyme activity and substrate specificity. The method can be generalized for electrochemical biosensors using an enzyme that releases hydrogen peroxide during its catalytic cycle. Using as proof of concept RgDAAO-based electrochemical biosensors, we found that the Michaelis-Menten constant (K_m) decreases post immobilization, hinting at alterations in the enzyme kinetic properties and thus substrate specificity. We confirm the decrease in K_m electrochemically by characterizing the substrate specificity of the immobilized RgDAAO using chronoamperometry. Our results demonstrate that enzyme immobilization affects enzyme substrate specificity and this must be carefully evaluated during biosensor development.

Integrating amino acid oxidase with photoresponsive probe: A fast quantitative readout platform of amino acid enantiomers

Low-cost, high-throughput, broadly useful photoresponsive enantiomeric excess (ee) sensing of amino acids remains challenging to date. Herein, based on the selective oxidation reaction of amino acid oxidase (AAO) to amino acid enantiomers (D/L-AA) and the oxidation reaction of substrate (H₂O₂) with aromatic boronic ester, we put forward a photoresponsive strategy for the determination of D/L-AA at a certain concentration. In this scheme, the substrate H₂O₂ produced by the enzyme-catalyzed reaction was determined by sensitive fluorescent and colorimetric response of ethyl-3-(3-(benzothiazol-2-yl)-5-methyl-2-((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)phenyl)-2-cyanoacrylate (HBT-PB) to reflect the enantiomeric content at a certain concentration. The photoresponsive probe HBT-PB was readily available and inexpensive with sensitive long-wavelength red fluorescence and colorimetric light response to H₂O₂, the detection limit (LOD) was estimated as 2.91 μM. The operation of the sensing method was simple and data collection and processing are straightforward. The practicability of the scheme was favorably confirmed by accurate and scientific analysis of methionine and Dopa samples. As a result, the scheme was not only suitable for high-throughput screening but also adaptable to low-cost and sensitive RGB colorimetric analysis platform (LOD of methionine and Dopa was calculated as 9.23 μM and 8.34 μM respectively) with modern plate readers, and possessed extremely high enantioselectivity and wide applicability which benefited from the specificity and efficiency of enzyme catalytic reaction.

An excellent thermostable dual-functionalized 3D fsx-type Cd(ii) MOF for the highly selective detection of Fe3+ ions and ten nitroaromatic explosives

A 3D fsx-type thermostable MOF was designed and synthesized for the highly selective detection of Fe3+ ions and ten nitroaromatic explosives.

Understanding the selective-sensing mechanism of lysine by fluorescent nanosensors based on graphene quantum dots

The selectivity of single-amino acid nanosensors is still not well understood. Herein, the factors that govern graphene-based nanomaterials for the selective detection of lysine are reported to guide the design of single-amino acid nanosensors. Graphene quantum dots (GQDs), nitrogen-doped GQDs (N-GQDs), and nitrogen/sulfur co-doped GQDs (N,S-GQDs) were used to sense lysine. The interaction mode and mechanism adjusted selectivity of the zero-dimensional graphene-based quantum dots to lysine ascribe to the solution behavior, molecular size, number of atoms as electron donors in graphene, and driving force. Being a basic amino acid, lysine is protonated with a positive charge below solution pH of 9. It adsorbed on the graphene-based quantum dots via electrostatic attraction, which blocked the internal charge transfer pathway inducing fluorescence enhancement at 420 nm. The protonated ɛ-amine side of lysine is responsible for the course. The small diameter of the lysine of ɛ-amine (<0.35 nm) favored its approach to the quantum dots, resulting in a fluorescence change, which could not be achieved with the larger arginine. The activated sites for interaction with lysine located at the edges of the layers of graphene to reach high selectivity. The N-GQDs and N,S-GQDs are much more sensitive to lysine than the GQDs because they contain nitrogen atoms as electron donors. They had similar linear detection ranges and detection limits, which suggested that the contribution of sulfur for lysine detection was minor. The results of this study provide new insights into the design of GQDs-based single-analyte nanosensors with high selectivity.

Voltammetric Determination of Phenylalanine Using Chemically Modified Screen-Printed Based Sensors

This paper describes the sensitive properties of screen-printed carbon electrodes (SPCE) modified by using three different electroactive chemical compounds: Meldola’s Blue, Cobalt Phthalocyanine and Prussian Blue, respectively. It was demonstrated that the Prussian Blue (PB) modified SPCE presented electrochemical signals with the highest performances in terms of electrochemical process kinetics and sensitivity in all the solutions analyzed. PB-SPCE was demonstrated to detect Phe through the influence it exerts on the redox processes of PB. The PB-SPCE calibration have shown a linearity range of 0.33–14.5 µM, a detection limit (LOD) of 1.23 × 10−8 M and the standard deviation relative to 3%. The PB-SPCE sensor was used to determine Phe by means of calibration and standard addition techniques on pure samples, on simple pharmaceutical samples or on multicomponent pharmaceutical samples. Direct determination of the concentration of 4 × 10−6–5 × 10−5 M Phe in KCl solution showed that the analytical recovery falls in the range of 99.75–100.28%, and relative standard deviations in the range of 2.28–3.02%. The sensors were successfully applied to determine the Phe in pharmaceuticals. The validation of the method was performed by using the FTIR, and by comparing the results obtained by PB-SPCE in the analysis of three pharmaceutical products of different concentrations with those indicated by the producer.

Tetraphenyl porphyrin films as selective detectors for amino acid molecules

The interaction of different amino acids and vacuum evaporated tetraphenyl porphyrin films was investigated by using kinetic isotherms, UV-vis spectroscopy, quartz crystal microbalance and density functional theory techniques. The adsorption process was analyzed by using pseudo-first-order and pseudo-second-order models. From these results, the adsorption order changed depending on the chemical characteristics of the porphyrin film, although most of the interactions were classified as pseudo-second-order at the films interface. From absorbance measurements, red shifts on the Soret peak positions were observed for all amino acids interacting with the metal free and the ZnTPP systems, while the position of the Soret peak barely change for the CuTPP surface, except for a slight bathocromic shift for arginine. On the other hand, the broadening of the Soret peak was more important for the ZnTPP and H2TPP surfaces, but the interaction with the CuTPP interfaces decreased the width of the peaks in all cases. In addition, a quartz crystal microbalance analysis was employed to investigate the film sensing performance during amino acid exposure. From these results, positively charged amino acids were more easily adsorbed on the films in contrast with the polar (serine) molecule. DFT calculations exhibited important deformations for H2TPP, the out-of-plane displacement of the Zn atom for ZnTPP, and hydrogen bond interactions with the CuTPP molecule. DFT also showed high binding energies for the positively charged amino acids but low binding energies for serine in agreement with experimental data. From these results, porphyrin films could be used as selective detectors for various L-amino acid molecules.

Why Not Glycine Electrochemical Biosensors?

Glycine monitoring is gaining importance as a biomarker in clinical analysis due to its involvement in multiple physiological functions, which results in glycine being one of the most analyzed biomolecules for diagnostics. This growing demand requires faster and more reliable, while affordable, analytical methods that can replace the current gold standard for glycine detection, which is based on sample extraction with subsequent use of liquid chromatography or fluorometric kits for its quantification in centralized laboratories. This work discusses electrochemical sensors and biosensors as an alternative option, focusing on their potential application for glycine determination in blood, urine, and cerebrospinal fluid, the three most widely used matrices for glycine analysis with clinical meaning. For electrochemical sensors, voltammetry/amperometry is the preferred readout (10 of the 13 papers collected in this review) and metal-based redox mediator modification is the predominant approach for electrode fabrication (11 of the 13 papers). However, none of the reported electrochemical sensors fulfill the requirements for direct analysis of biological fluids, most of them lacking appropriate selectivity, linear range of response, and/or capability of measuring at physiological conditions. Enhanced selectivity has been recently reported using biosensors (with an enzyme element in the electrode design), although this is still a very incipient approach. Currently, despite the benefits of electrochemistry, only optical biosensors have been successfully reported for glycine detection and, from all the inspected works, it is clear that bioengineering efforts will play a key role in the embellishment of selectivity and storage stability of the sensing element in the sensor.

Biosensors for D-Amino Acids: Detection Methods and Applications

D-enantiomers of amino acids (D-AAs) are only present in low amounts in nature, frequently at trace levels, and for this reason, their biological function was undervalued for a long time. In the past 25 years, the improvements in analytical methods, such as gas chromatography, HPLC, and capillary electrophoresis, allowed to detect D-AAs in foodstuffs and biological samples and to attribute them specific biological functions in mammals. These methods are time-consuming, expensive, and not suitable for online application; however, life science investigations and industrial applications require rapid and selective determination of D-AAs, as only biosensors can offer. In the present review, we provide a status update concerning biosensors for detecting and quantifying D-AAs and their applications for safety and quality of foods, human health, and neurological research. The review reports the main challenges in the field, such as selectivity, in order to distinguish the different D-AAs present in a solution, the simultaneous assay of both L- and D-AAs, the production of implantable devices, and surface-scanning biosensors. These innovative tools will push future research aimed at investigating the neurological role of D-AAs, a vibrant field that is growing at an accelerating pace.

Intriguing pH-modulated Luminescence Chameleon System based on Postsynthetic Modified Dual-emitting Eu3+@Mn-MOF and Its Application for Histidine Chemosensor

Due to the disruption by other nonanalyte factors, single-emission probes have been limited in complicated detecting systems. In this work, a pH-modulated luminescence chameleon system based on lanthanide-based MOF (Eu³⁺@Mn-MOF), with stable structure and miraculous dual-emitting fluorescent properties, was synthesized by a postsynthetic modification (PSM) strategy of a simple hydrothermal and agitation method. Amazingly, not only can the Eu³⁺@Mn-MOF emit a broad emission at 500 nm attributed to the ligand-based fluorescence emission but it can also exhibit the characteristic emission of Eu³⁺ ions responding to the antenna effect. Moreover, the Eu³⁺@Mn-MOF displays an interesting luminescence color transition between acidic and basic solutions. Inspired by this phenomenon, a pH-modulated luminescence chameleon system was first constructed and employed to detect histidine, a kind of basic amino acid for a variety of biological matters, causing a unique fluorescence signal of the ratio-dependent color to change from yellow to light pink which differs from the color change of other water-soluble amino acids. Therefore, Eu³⁺@Mn-MOF can be as a practical pH-modulated luminescence chameleon system chemsensor for sensing histidine with low detection limit, high sensitivity, and rapid sensing time. In conclusion, the postsynthetic modified Eu³⁺@Mn-MOF has outstanding applications in the fields of chemical detection and human health.

Simultaneous determination of five essential amino acids in plasma of Hyperlipidemic subjects by UPLC-MS/MS

BACKGROUND

Millions of adults have been reported with hyperlipemia in the world. It is still unclear whether the plasma level of essential amino acids (AAs) will be influenced by the hyperlipemia. This study was aimed to investigate the AAs levels and the underlying metabolic relationship in hyperlipidemic subjects.

METHODS

An ultra-high performance liquid chromatography-tandem mass spectrometric (UPLC-MS/MS) method was developed for the determination of phenylalanine (Phe), valine (Val), histidine (His), tryptophan (Trp), and methionine (Met). Plasma samples (100 μL) were precipitated by acetonitrile (300 μL) and analyzed on a BEH C18 (2.1 mm × 100 mm, 1.7 μm) column at 40 °C by gradient elution. The mobile phase composed of 0.1% formic acid and acetonitrile was used with flow rate at 0.2-0.4 ml/0-3 min. Five AAs were determined at positive electrospray ionization (ESI+) at m/z 118.1/72.1 (Val), 150.12/104.02(Met), 156.06/110.05(His), 166.1/120.1(Phe), and 205.2/188.02 (Trp). A total of 75 healthy subjects and 83 hyperlipidemic subjects, who had blood routine test and plasma lipid test were determined by developed UPLC-MS/MS.

RESULTS

It was shown that there was good linearity for Val, Met, His, Phe, and Trp within 1-100 μg/mL. The relative standard deviations of precision and accuracy were all within 15%. The level of Val, Phe, Trp, His, and Met were 35.34 ± 15.64, 22.72 ± 9.13, 17.23 ± 4.94, 16.78 ± 13.64, and 6.24 ± 1.97 μg/mL in healthy subjects, while they were 38.04 ± 16.70, 22.41 ± 8.45, 15.62 ± 5.77, 18.35 ± 14.49, and 6.21 ± 1.97 μg/mL in hyperlipidemic subjects respectively. The Spearman's correlations analysis showed that there were high correlations between Val, Phe, Trp, His, Met and triglyceride in healthy subjects. While, those correlations decreased in hyperlipemia cases.

CONCLUSION

A convenient and sensitive method for simultaneous determination of Val, Phe, Trp, His, and Met in human plasma was developed. There was a high correlation between Val, Phe, Trp, His, Met and triglyceride. Hyperlipemia influences the metabolic balance of His, Phe, Trp, Met and Val.

Enhancing hydrogel-based long-lasting chemiluminescence by a platinum-metal organic framework and its application in array detection of pesticides and d-amino acids

Organophosphorus pesticides (OPs) are harmful to people's health and d-amino acids (d-AAs) in the human body are closely related to various diseases. So, detection of OPs in foods and d-AAs in serum is important for food safety and clinical diagnosis. Herein, a long-lasting chemiluminescence (CL) imaging sensor was constructed for the detection of OPs and d-AAs. The method was based on N-(4-aminobutyl)-N-ethylisoluminol/Co2+/chitosan (ABEI/Co2+/CS) hydrogels, where metal organic framework materials (MOF-Pt) were selected as catalysts to improve the sensitivity greatly. Under the catalysis of acetylcholinesterase (AChE) and choline oxidase (CHO), H2O2 was produced by using acetylcholine chloride (ACh) as a substrate, which was sensitive to the proposed CL system. OPs inhibited the activity of AChE and decreased the production of H2O2, reducing CL intensity. The linear range of the method for chlorpyrifos was 0.5 ng mL-1-1.0 μg mL-1, with a limit of detection (LOD) of 0.21 ng mL-1. Seventeen kinds of OPs can be visually and simultaneously discerned by the CL imager. On the other hand, d-AAs were catalyzed and oxidized by d-α-amino oxidase (DAAO) to produce H2O2. Thus, d-Ala in serum was used as a model to be detected by the proposed method. The linear range for d-Ala was 1.0 μM-10 mM, with an LOD of 0.12 μM.