Application of chitosan microspheres for nasal delivery of vaccines

Double synergic chitosan-coated poly (lactic-co-glycolic) acid nanospheres loaded with nucleic acids as an intranasally administered vaccine delivery system to control the infection of foot-and-mouth disease virus

BACKGROUND & AIMS

The spread of foot-and-mouth disease virus (FMDV) through aerosol droplets among cloven-hoofed ungulates in close contact is a major obstacle for successful animal husbandry. Therefore, the development of suitable mucosal vaccines, especially nasal vaccines, to block the virus at the initial site of infection is crucial.

PATIENTS AND METHODS

Here, we constructed eukaryotic expression plasmids containing the T and B-cell epitopes (pTB) of FMDV in tandem with the molecular mucosal adjuvant Fms-like tyrosine kinase receptor 3 ligand (Flt3 ligand, FL) (pTB-FL). Then, the constructed plasmid was electrostatically attached to mannose-modified chitosan-coated poly(lactic-co-glycolic) acid (PLGA) nanospheres (MCS-PLGA-NPs) to obtain an active nasal vaccine targeting the mannose-receptor on the surface of antigen-presenting cells (APCs).

RESULTS

The MCS-PLGA-NPs loaded with pTB-FL not only induced a local mucosal immune response, but also induced a systemic immune response in mice. More importantly, the nasal vaccine afforded an 80% protection rate against a highly virulent FMDV strain (AF72) when it was subcutaneously injected into the soles of the feet of guinea pigs.

CONCLUSIONS

The nasal vaccine prepared in this study can effectively induce a cross-protective immune response against the challenge with FMDV of same serotype in animals and is promising as a potential FMDV vaccine.

Nanotechnology of inhalable vaccines for enhancing mucosal immunity

Vaccines are the cornerstone of world health. The majority of vaccines are formulated as injectable products, facing the drawbacks of cold chain transportation, needle-stick injuries, and primary systemic immunity. Inhalable vaccines exhibited unique advantages due to their small dose, easy to use, quick effect, and simultaneous induction of mucosal and systemic responses. Facing global pandemics, especially the coronavirus disease 2019 (COVID-19), a majority of inhalable vaccines are in preclinical or clinical trials. A better understanding of advanced delivery technologies of inhalable vaccines may provide new scientific insights for developing inhalable vaccines. In this review article, detailed immune mechanisms involving mucosal, cellular, and humoral immunity were described. The preparation methods of inhalable vaccines were then introduced. Advanced nanotechnologies of inhalable vaccines containing inhalable nucleic acid vaccines, inhalable adenovirus vector vaccines, novel adjuvant-assisted inhalable vaccines, and biomaterials for inhalable vaccine delivery were emphatically discussed. Meanwhile, the latest clinical progress in inhalable vaccines for COVID-19 and tuberculosis was discussed.

Development of Vinpocetine-Loaded Nasal Polymeric Micelles via Nano-Spray-Drying

In this present formulation study, vinpocetine-loaded nano-spray-dried polymeric micelles were developed via nano-spray-drying. Three different mucoadhesive excipients were applied in the studies, namely chitosan, hyaluronic acid and hydroxypropyl methylcellulose. In all cases, the formulations had a proper particle size and drug content after drying with spherical morphology and amorphous structure. After rapid dissolution in water, the polymeric micelles had a particle size around 100-130 nm, in monodisperse size distribution. The high encapsulation efficiency (>80%) and high solubilization (approx. 300-fold increase in thermodynamic solubility) contributed to rapid drug release (>80% in the first 15 min) and fast passive diffusion at simulated nasal conditions. The formulated prototype preparations fulfilled the demands of a low-viscosity, moderately mucoadhesive nasal drug delivery system, which may be capable of increasing the overall bioavailability of drugs administered via the auspicious nasal drug delivery route.

The Mucoadhesive Nanoparticle-Based Delivery System in the Development of Mucosal Vaccines

Mucosal tissue constitutes the largest interface between the body and the external environment, regulating the entry of pathogens, particles, and molecules. Mucosal immunization is the most effective way to trigger a protective mucosal immune response. However, the majority of the currently licensed vaccines are recommended to be administered by intramuscular injection, which has obvious shortcomings, such as high production costs, low patient compliance, and lack of mucosal immune response. Strategies for eliciting mucosal and systemic immune responses are being developed, including appropriate vaccine adjuvant, delivery system, and bacterial or viral vectors. Biodegradable mucoadhesive nanoparticles (NPs) are the most promising candidate for vaccine delivery systems due to their inherent immune adjuvant property and the ability to protect the antigen from degradation, sustain the release of loaded antigen, and increase the residence time of antigen at the administration site. The current review outlined the complex structure of mucosa, the mechanism of interaction between NPs and mucosa, factors affecting the mucoadhesion of NPs, and the application of the delivery system based on mucoadhesive NPs in the field of vaccines. Moreover, this review demonstrated that the biodegradable and mucoadhesive NP-based delivery system has the potential for mucosal administration of vaccines.

Spray dried powders for nasal delivery: Process and formulation considerations

Powders for nasal delivery have been recognized as advantageous dosage forms over liquids due to increased stability and residence time on nasal mucosa, with improved bioavailability. They can be manufactured by spray-drying, allowing the optimization of the particle properties that are critical to guarantee nasal deposition, as size and shape. It is also a scalable and flexible method already explored extensively in the pharmaceutical industry. However, it is important to understand how process parameters, particle physical properties and formulation considerations affect the product performance. Hence, this review aims to provide an overview of nasal powder formulation and processing through spray drying, with an emphasis on the variables that impact on performance. To this purpose, we describe the physical, biological and pharmacological phenomena prior to drug absorption as well as the most relevant powder properties. Formulation considerations including qualitative and quantitative composition are then reviewed, as well as manufacturing considerations including spray drying relevant parameters.

Surface-Modified Bilosomes Nanogel Bearing a Natural Plant Alkaloid for Safe Management of Rheumatoid Arthritis Inflammation

Rheumatoid arthritis (RA) is a chronic inflammatory illness affecting the joints. The characteristic of RA is gradual joint deterioration. Current RA treatment alleviates signs such as inflammation and pain and substantially slows the progression of the disease. In this study, we aimed to boost the transdermal delivery of berberine (a natural product) by encapsulating it in chitosan, surface-modified bilosomes nanogel for better management of the inflammation of RA. The chitosan-coated bilosomes loaded with berberine (BER-CTS-BLS) were formulated according to the thin-film hydration approach and optimized for various causal variables, considering the effect of lipid, sodium deoxycholate, and chitosan concentrations on the size of the particles, entrapment, and the surface charge. The optimized BER-CTS-BLS has 202.3 nm mean diameter, 83.8% entrapment, and 30.8 mV surface charge. The optimized BER-CTS-BLS exhibited a delayed-release profile in vitro and increased skin permeability ex vivo. Additionally, histological examination revealed that the formulated BLS had no irritating effects on the skin. Furthermore, the optimized BER-CTS-BLS ability to reduce inflammation was evaluated in rats with carrageenan-induced paw edema. Our results demonstrate that the group treated with topical BER-CTS-BLS gel exhibited a dramatic reduction in rat paw edema swelling percentage to reach 24.4% after 12 h, which was substantially lower than other groups. Collectively, chitosan-coated bilosomes containing berberine have emerged as a promising therapeutic approach to control RA inflammation.

Nanotechnologies in Delivery of DNA and mRNA Vaccines to the Nasal and Pulmonary Mucosa

Recent advancements in the field of in vitro transcribed mRNA (IVT-mRNA) vaccination have attracted considerable attention to such vaccination as a cutting-edge technique against infectious diseases including COVID-19 caused by SARS-CoV-2. While numerous pathogens infect the host through the respiratory mucosa, conventional parenterally administered vaccines are unable to induce protective immunity at mucosal surfaces. Mucosal immunization enables the induction of both mucosal and systemic immunity, efficiently removing pathogens from the mucosa before an infection occurs. Although respiratory mucosal vaccination is highly appealing, successful nasal or pulmonary delivery of nucleic acid-based vaccines is challenging because of several physical and biological barriers at the airway mucosal site, such as a variety of protective enzymes and mucociliary clearance, which remove exogenously inhaled substances. Hence, advanced nanotechnologies enabling delivery of DNA and IVT-mRNA to the nasal and pulmonary mucosa are urgently needed. Ideal nanocarriers for nucleic acid vaccines should be able to efficiently load and protect genetic payloads, overcome physical and biological barriers at the airway mucosal site, facilitate transfection in targeted epithelial or antigen-presenting cells, and incorporate adjuvants. In this review, we discuss recent developments in nucleic acid delivery systems that target airway mucosa for vaccination purposes.

S100A4 exerts robust mucosal adjuvant activity for co-administered antigens in mice

The lack of clinically applicable mucosal adjuvants is a major hurdle in designing effective mucosal vaccines. We hereby report that the calcium-binding protein S100A4, which regulates a wide range of biological functions, is a potent mucosal adjuvant in mice for co-administered antigens, including the SARS-CoV-2 spike protein, with comparable or even superior efficacy as cholera toxin but without causing any adverse reactions. Intranasal immunization with recombinant S100A4 elicited antigen-specific antibody and pulmonary cytotoxic T cell responses, and these responses were remarkably sustained for longer than 6 months. As a self-protein, S100A4 did not stimulate antibody responses against itself, a quality desired of adjuvants. S100A4 prolonged nasal residence of intranasally delivered antigens and promoted migration of antigen-presenting cells. S100A4-pulsed dendritic cells potently activated cognate T cells. Furthermore, S100A4 induced strong germinal center responses revealed by both microscopy and mass spectrometry, a novel label-free technique for measuring germinal center activity. Importantly, S100A4 did not induce olfactory bulb inflammation after nasal delivery, which is often a safety concern for nasal vaccination. In conclusion, S100A4 may be a promising adjuvant in formulating mucosal vaccines, including vaccines against pathogens that infect via the respiratory tract, such as SARS-CoV-2.

Role of different types of nanomaterials against diagnosis, prevention and therapy of COVID-19

In 2019, a novel type of coronavirus emerged in China called SARS-COV-2, known COVID-19, threatens global health and possesses negative impact on people's quality of life, leading to an urgent need for its diagnosis and remedy. On the other hand, the presence of hazardous infectious waste led to the increase of the risk of transmitting the virus by individuals and by hospitals during the COVID-19 pandemic. Hence, in this review, we survey previous researches on nanomaterials that can be effective for guiding strategies to deal with the current COVID-19 pandemic and also decrease the hazardous infectious waste in the environment. We highlight the contribution of nanomaterials that possess potential to therapy, prevention, detect targeted virus proteins and also can be useful for large population screening, for the development of environmental sensors and filters. Besides, we investigate the possibilities of employing the nanomaterials in antiviral research and treatment development, examining the role of nanomaterials in antiviral- drug design, including the importance of nanomaterials in drug delivery and vaccination, and for the production of medical equipment. Nanomaterials-based technologies not only contribute to the ongoing SARS- CoV-2 research efforts but can also provide platforms and tools for the understanding, protection, detection and treatment of future viral diseases.

Photodynamic potential of curcumin in bioadhesive formulations: Optical characteristics and antimicrobial effect against biofilms

BACKGROUND

Although Curcumin (CUR) has great potential as a photosensitizer, the low solubility in water impairs its clinical performance in photodynamic inactivation (PDI). This study sought to establish an effective antimicrobial protocol for PDI using CUR in three different bioadhesive formulations.

METHODS

A CUR-loaded chitosan hydrogel with a poloxamer (CUR-CHIH), a CUR-loaded liquid crystal precursor system (CUR-LCP), a CUR-loaded microemulsion (CUR-ME), and CUR in dimethylsulfoxide (DMSO) solution (CUR-S; control formulation) were tested against in vitro and in situ oral biofilms. The optical properties of each formulation were evaluated.

RESULTS

All of the formulations exhibited lower absorbance than CUR-S; however, the CUR-LCP curve bore the highest resemblance. The CUR present in all formulations was completely degraded after 15 min of illumination. In vitro experiments showed that CUR-S was the only formulation able to significantly reduce biofilm viability of Candida albicans and Lactobacillus casei when compared to the negative control (no PDI); the amount of reduction obtained was 1.8 and 3.7 log (CFU/mL) for C. albicans and L. casei, respectively. There was a significant reduction on the viability of Streptococcus mutans biofilms when CUR-S and CUR-LCP were applied (approximately 3.5 and 1.6 log [CFU/mL], respectively). In situ testing showed antimicrobial efficacy against S. mutans and general microorganisms.

CONCLUSIONS

Although the evaluated protocols has not been effective to all of the evaluated microorganisms, PDI showed potential against dental biofilms and evidence that the phototoxic effects of CUR have a high relation with the type of formulation in which it is loaded.

Mucoadhesive and mucus-penetrating interpolyelectrolyte complexes for nose-to-brain drug delivery

Nasal administration offers a possibility of delivering drugs to the brain. In the present work, nasal drug delivery systems were designed based on cationic Eudragit® EPO (EPO) and anionic Eudragit® L100-55 (L100-55) methacrylate copolymers. Two types of nanocarriers were prepared using interpolyelectrolyte complexation between these polymers. The first type of nanoparticles was prepared by forming interpolyelectrolyte complexes between unmodified EPO and L100-55. The second type of nanoparticles was formed through the complexation between PEGylated L100-55 and EPO. For this purpose, PEGylated L100-55 was synthesized by chemical conjugation of L100-55 with O-(2-aminoethyl)polyethylene glycol. The mucoadhesive properties of these nanoparticles were evaluated ex vivo using sheep nasal mucosa. Nanoparticles based on EPO and L100-55 exhibited mucoadhesive properties towards nasal mucosa, whereas PEGylated nanoparticles were non-mucoadhesive hence displayed mucus-penetrating properties. Both types of nanoparticles were used to formulate haloperidol and their ability to deliver the drug to the brain was evaluated in rats in vivo.

Role of chitosan based nanomedicines in the treatment of chronic respiratory diseases

Chitosan-loaded nanomedicines provide a greater opportunity for the treatment of respiratory diseases. Natural biopolymer chitosan and its derivatives have a large number of proven pharmacological actions like antioxidant, wound healing, immuno-stimulant, hypocholesterolemic, antimicrobial, obesity treatment, anti-inflammatory, anticancer, bone tissue engineering, antifungal, regenerative medicine, anti-diabetic and mucosal adjuvant, etc. which attracted its use in the pharmaceutical industry. As compared to other polysaccharides, chitosan has excellent mucoadhesive characteristics, less viscous, easily modified into the chemical and biological molecule and gel-forming property due to which the drugs retain in the respiratory tract for a longer period of time providing enhanced therapeutic action of the drug. Chitosan-based nanomedicines would have the greatest effect when used to transport poor water soluble drugs, macromolecules like proteins, and peptides through the lungs. In this review, we highlight and discuss the role of chitosan and its nanomedicines in the treatment of chronic respiratory diseases such as pneumonia, asthma, COPD, lung cancer, tuberculosis, and COVID-19.

Physico-Chemical and In Vitro Characterization of Chitosan-Based Microspheres Intended for Nasal Administration

The absorption of non-steroidal anti-inflammatory drugs (NSAIDs) through the nasal epithelium offers an innovative opportunity in the field of pain therapy. Thanks to the bonding of chitosan to the nasal mucosa and its permeability-enhancing effect, it is an excellent choice to formulate microspheres for the increase of drug bioavailability. The aim of our work includes the preparation of spray-dried cross-linked and non-cross-linked chitosan-based drug delivery systems for intranasal application, the optimization of spray-drying process parameters (inlet air temperature, pump rate), and the composition of samples. Cross-linked products were prepared by using different amounts of sodium tripolyphosphate. On top of these, the micrometric properties, the structural characteristics, the in vitro drug release, and the in vitro permeability of the products were studied. Spray-drying resulted in micronized chitosan particles (2–4 μm) regardless of the process parameters. The meloxicam (MEL)-containing microspheres showed nearly spherical habit, while MEL was present in a molecularly dispersed state. The highest dissolved (>90%) and permeated (~45 µg/cm²) MEL amount was detected from the non-cross-linked sample. Our results indicate that spray-dried MEL-containing chitosan microparticles may be recommended for the development of a novel drug delivery system to decrease acute pain or enhance analgesia by intranasal application.

Chitosan-Based Nanoparticles Against Viral Infections

Viral infections, in addition to damaging host cells, can compromise the host immune system, leading to frequent relapse or long-term persistence. Viruses have the capacity to destroy the host cell while liberating their own RNA or DNA in order to replicate within additional host cells. The viral life cycle makes it challenging to develop anti-viral drugs. Nanotechnology-based approaches have been suggested to deal effectively with viral diseases, and overcome some limitations of anti-viral drugs. Nanotechnology has enabled scientists to overcome the challenges of solubility and toxicity of anti-viral drugs, and can enhance their selectivity towards viruses and virally infected cells, while preserving healthy host cells. Chitosan is a naturally occurring polymer that has been used to construct nanoparticles (NPs), which are biocompatible, biodegradable, less toxic, easy to prepare, and can function as effective drug delivery systems (DDSs). Furthermore, chitosan is Generally Recognized as Safe (GRAS) by the US Food and Drug Administration (U.S. FDA). Chitosan NPs have been used in drug delivery by the oral, ocular, pulmonary, nasal, mucosal, buccal, or vaginal routes. They have also been studied for gene delivery, vaccine delivery, and advanced cancer therapy. Multiple lines of evidence suggest that chitosan NPs could be used as new therapeutic tools against viral infections. In this review we summarize reports concerning the therapeutic potential of chitosan NPs against various viral infections.

Non-Reflex Defense Mechanisms of Upper Airway Mucosa: Possible Clinical Application

The sinonasal mucosa has an essential role in defense mechanisms of the upper respiratory tract. The innate immune system presents the primary defense against noxious microorganisms followed by induction of the adaptive immune mechanisms as a consequence of the presence of pathogens. This well-known activation of adaptive immune system in response to presence of the antigen on mucosal surfaces is now broadly applicated in vaccinology research. Prevention of infectious diseases belongs to substantial challenges in maintaining the population health. Non-invasive, easily applicable mucosal vaccination purposes various research opportunities that could be usable in daily practice. However, the existence of multiple limitations such as rapid clearance of vaccine from nasal mucosa by means of mucociliary transport represents a great challenge in development of safe and efficient vaccines. Here we give an updated view on nasal functions with focus on nasal mucosal immunity and its potential application in vaccination in nearly future.

A novel nanogel loaded with chitosan decorated bilosomes for transdermal delivery of terbutaline sulfate: artificial neural network optimization, in vitro characterization and in vivo evaluation

The objective of the present work was to formulate, optimize, and evaluate transdermal terbutaline sulfate (TBN)-loaded bilosomes (BLS) in gel, compared to conventional oral TBN solution and transdermal gel loaded with free TBN, aiming at evading the hepatic first-pass metabolism. A face-centered central composite design was adopted to observe the effects of different formulation variables on TBN-BLS, and artificial neural network (ANN) modeling was employed to optimize TBN-BLS. TBN-BLS were prepared by a thin film hydration method integrating soybean phosphatidylcholine and cholesterol as a lipid phase and sodium deoxycholate (SDC) as a surfactant with or without the coating of chitosan (CTS). After being subjected to physicochemical characterization, TBN-BLS were enrolled in a histopathological study and pharmacokinetic investigation in a rat model. The optimized TBN chitosan-coated bilosomes (TBN-CTS-BLS) were spherical vesicles (245.13 ± 10.23 nm) with adequate entrapment efficiency (65.25 ± 5.51%) and good permeation characteristics (340.11 ± 22.34 μg/cm²). The TBN-CTS-BLS gel formulation was well-tolerated with no inflammatory signs manifested upon histopathological evaluation. The pharmacokinetic study revealed that the optimized TBN-CTS-BLS formulation successively enhanced the bioavailability of TBN by about 2.33-fold and increased t_1/2 to about 6.21 ± 0.24 h as compared to the oral solution. These findings support the prospect use of BLS as active and safe transdermal carrier for TBN in the treatment of asthma. Graphical Abstract.

Use of PELC/CpG Adjuvant for Intranasal Immunization with Recombinant Hemagglutinin to Develop H7N9 Mucosal Vaccine

Human infections with H7N9 avian influenza A virus can result in severe diseases with high mortality. Developing an effective vaccine is urgently needed to prevent its pandemic potential. Vaccine delivery routes via mucosal surfaces are known to elicit mucosal immune responses such as secretory IgA antibodies in mucosal fluids, thus providing first-line protection at infection sites. PEG-b-PLACL (PELC) is a squalene-based oil-in-water emulsion adjuvant system that can enhance antigen penetration and uptake in nasal mucosal layers with enhanced mucin interactions. In this study, intranasal immunizations with recombinant H7 (rH7) proteins with a PELC/CpG adjuvant, as compared to the use of poly (I:C) or bacterial flagellin adjuvant, elicited higher titers of H7-specific IgG, IgA, hemagglutination inhibition, and neutralizing antibodies in sera, and increased numbers of H7-specific IgG- and IgA-antibody secreting cells in the spleen. Both PELC/CpG and poly (I:C) adjuvants at a dose as low as 5 μg HA provided an 80% survival rate against live virus challenges, but a lower degree of PELC/CpG-induced Th17 responses was observed. Therefore, the mucosal delivery of rH7 proteins formulated in a PELC/CpG adjuvant can be used for H7N9 mucosal vaccine development.

Intranasal administration with recombinant Bacillus subtilis induces strong mucosal immune responses against pseudorabies

Background

Pseudorabies caused by pseudorabies virus (PRV) mainly infects the swine and seriously threatens the biosafety of the other animals, including humans. Since 2011, the outbreaks of PRV mutants have caused enormous economic losses in the swine industry, and traditional vaccines cannot offer enough protection. PRV can transmit by direct contact, aerosol transmission and pollutants. PRV mainly transmit through the nasal mucosa. After infecting the nasal epithelial cells, PRV can quickly infect the olfactory nerve and establish a potential infection of sensory neurons. Therefore, nasal immunity can effectively prevent viral colonization infection. Recombinant Bacillus subtilis has been widely used to deliver antigen and achieve adequate protective immune responses.

Results

The present study successfully constructed recombinant Bacillus subtilis (B. subtilis) expressing the dominant antigen regions of PRV gC and gD proteins (named B. subtilis-gCa and B. subtilis-gDa). Furtherly, we evaluated the immunogenicity of the two recombinant B. subtilis in mice. The mice intranasal administration with B. subtilis-gCa and B. subtilis-gDa effectively stimulated IgA and IgG immune responses, further regulated specific T lymphocytes proliferative response by IFN-γ and IL-10, and ultimately produced high titers of neutralizing antibodies against PRV infection. In particular, B. subtilis-gDa possessed more excellent immune effect than B. subtilis-gCa in mice.

Conclusions

These results suggested that B. subtilis-gCa and B. subtilis-gDa could trigger high levels of mucosal and systemic immune responses and would be potential candidates for developing PRV vaccines.

Electronic supplementary material

The online version of this article (10.1186/s12934-019-1151-8) contains supplementary material, which is available to authorized users.

Characterization of immunogenicity of avian influenza antigens encapsulated in PLGA nanoparticles following mucosal and subcutaneous delivery in chickens

Mucosal vaccine delivery systems have paramount importance for the induction of mucosal antibody responses. Two studies were conducted to evaluate immunogenicity of inactivated AIV antigens encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs). In the first study, seven groups of specific pathogen free (SPF) layer-type chickens were immunized subcutaneously at 7-days of age with different vaccine formulations followed by booster vaccinations two weeks later. Immune responses were profiled by measuring antibody (Ab) responses in sera and lachrymal secretions of vaccinated chickens. The results indicated that inactivated AIV and CpG ODN co-encapsulated in PLGA NPs (2x NanoAI+CpG) produced higher amounts of hemagglutination inhibiting antibodies compared to a group vaccinated with non-adjuvanted AIV encapsulated in PLGA NPs (NanoAI). The tested adjuvanted NPs-based vaccine (2x NanoAI+CpG) resulted in higher IgG responses in the sera and lachrymal secretions at weeks 3, 4 and 5 post-vaccination when immunized subcutaneously. The incorporation of CpG ODN led to an increase in Ab-mediated responses and was found useful to be included both in the prime and booster vaccinations. In the second study, the ability of chitosan and mannan coated PLGA NPs that encapsulated AIV and CpG ODN was evaluated for inducing antibody responses when delivered via nasal and ocular routes in one-week-old SPF layer-type chickens. These PLGA NPs-based and surface modified formulations induced robust AIV-specific antibody responses in sera and lachrymal secretions. Chitosan coated PLGA NPs resulted in the production of large quantities of lachrymal IgA and IgG compared to mannan coated NPs, which also induced detectable amounts of IgA in addition to the induction of IgG in lachrymal secretions. In both mucosal and subcutaneous vaccination approaches, although NPs delivery enhanced Ab-mediated immunity, one booster vaccination was required to generate significant amount of Abs. These results highlight the potential of NPs-based AIV antigens for promoting the induction of both systemic and mucosal immune responses against respiratory pathogens.

Crosslinked chitosan films with controllable properties for commercial applications

In this research, sustainable and green bioproducts with controlled sorption and good mechanical properties have been developed from chitosan for commercial applications. Addition of citric acid, a biocompatible crosslinker, and later treating with alkali imparts excellent tensile strength and aqueous stability to the chitosan films. Films were developed from chitosan and studied for their sorption capabilities, mechanical properties, oxygen/water vapour transmission rates and antimicrobial abilities. Moisture sorption of up to 1466% based on the dry weight of chitosan was seen when the films were untreated. However, treating the films with alkali decreased their water sorption to 100-250% and made the films resistant even to boiling water. Modified chitosan could be moulded into various forms and made into bioproducts that could replace plastic based materials. The chitosan bioproducts developed have the potential to replace plastic based products and will help to provide a greener alternative for the plastic based commodity products in current use.

Assessment of Chitosan-Based Hydrogel and Photodynamic Inactivation against Propionibacterium acnes

Chitosan (CH) is a biopolymer that exhibits a number of interesting properties such as anti-inflammatory and antibacterial activity and is also a promising platform for the incorporation of photosensitizing agents. This study aimed to evaluate the efficacy of antimicrobial activity of chitosan hydrogel formulation alone and in combination with the methylene blue (MB) associated with antimicrobial photodynamic therapy (aPDT) against planktonic and biofilm phase of Propionibacterium acnes. Suspensions were sensitized with 12.5, 25.0, 37.5, 50.0 μg/mL of MB for 10 min and biofilms to 75, 100 and 150 μg/mL for 30 min then exposed to red light (660 nm) at 90 J/cm² and 150 J/cm² respectively. After treatments, survival fractions were calculated by counting the number of colony-forming units. The lethal effect of aPDT associated with CH hydrogel in planktonic phase was achieved with 12.5 µg/mL MB and 1.9 log10 biofilm reduction using 75 µg/mL MB. Rheological studies showed that formulations exhibited pseudoplastic non-Newtonian behavior without thixotropy. Bioadhesion test evidenced that the formulations are highly adhesive to skin and the incorporation of MB did not influence the bioadhesive force of the formulations.

Polyethyleneimine and Chitosan Polymer-Based Mucoadhesive Liquid Crystalline Systems Intended for Buccal Drug Delivery

The buccal mucosa is accessible, shows rapid repair, has an excellent blood supply, and shows the absence of the first-pass effect, which makes it a very attractive drug delivery route. However, this route has limitations, mainly due to the continuous secretion of saliva (0.5 to 2 L/day), which may lead to dilution, possible ingestion, and unintentional removal of the active drug. Nanotechnology-based drug delivery systems, such as liquid crystalline systems (LCSs), can increase drug permeation through the mucosa and thereby improve drug delivery. This study aimed at developing and characterizing the mechanical, rheological, and mucoadhesive properties of four liquid crystalline precursor systems (LCPSs) composed of four different aqueous phases (i) water (FW), (ii) chitosan (FC), (iii) polyethyleneimine (FP), or (iv) both polymers (FPC); oleic acid was used as the oil phase, and ethoxylated and propoxylated cetyl alcohol was used as the surfactant. Polarized light microscopy and small-angle X-ray scattering indicated that all LCPSs formed liquid crystalline states after incorporation of saliva. Rheological, texture, and mucoadhesive assays showed that FPC had the most suitable characteristics for buccal application. In vitro release study showed that FPC could act as a controlled drug delivery system. Finally, based on in vitro cytotoxicity data, FPC is a safe buccal drug delivery system for the treatment of several buccal diseases.

Modulating the release of proteins from a loaded carrier of alginate/gelatin porous spheres immersed in different solutions

BACKGROUND

A biodegradable porous particle for the controlled biofactor delivery which assembly of pores in scaffolds can improve the permeation and diffusion of drugs or growth factors.

OBJECTIVE

Porous-spheres in millimeter scale were prepared by mixing sodium alginate and gelatin interpenetrating networks with cross-linkers; interconnected open pores were fabricated through solvent casting and particulate leaching.

METHODS

Morphological characteristics, degradation, and bovine serum albumin (BSA) release rates of the porous-spheres immersed in three different solutions, namely, deionized distilled water, simulated body fluid (SBF), and phosphate-buffered saline (PBS), were detected.

RESULTS

Porous-spheres with a large amount of gelatin exhibited an increase in water absorption rates without affecting scaffold strength and no cytotoxicity was elicited. Highly interconnected pores with a diameter of 100-200 µm were uniformly distributed in scaffolds. The weight loss in PBS was faster than that in other solutions; the highest release rate of BSA in SBF was observed for 2 h. The release rates also exhibited linear patterns from 2 h to 24 h in all of the groups.

CONCLUSIONS

After 1 d of immersion in solutions, BSA release rates in scaffolds logarithmically decreased for 14 d. The degradation of porous-spheres also showed an inverse pattern.

Antigen-loaded polymeric hybrid micelles elicit strong mucosal and systemic immune responses after intranasal administration

Increasing attention has been paid to nasal delivery. Subunit vaccines based on antigenic proteins or polypeptides offer good safety. However, lack of delivery efficiency, particularly for nasal immunization, is a big issue. Here we designed a highly tunable polymeric hybrid micelle (PHM) system offering good vaccine efficacy after nasal administration. PHMs are formulated from two amphiphilic diblock copolymers, polycaprolactone-polyethylenimine (PCL-PEI) and polycaprolactone-polyethyleneglycol (PCL-PEG), the ratio of which determines PHM physicochemical properties. Citraconic anhydride-modified ovalbumin (Cit-OVA), as model antigen, was incorporated into PHMs via electrostatic interaction, giving antigen-loaded micelles of around 150nm in size. Their surface characteristics which are found closely related to their in vivo kinetics can be modulated by adjusting the mass ratio of PCL-PEG and PCL-PEI. PHM/Cit-OVA complexes containing PCL-PEI and PCL-PEG in a 1:1 mass ratio induced strong immune responses in nasal mucosa and serum in vivo without causing obvious toxicity, and Cit-OVA was efficiently internalized by dendritic cells. These results demonstrate the promise of this multifunctional polymeric delivery system for nasal vaccination.

Systemic and Mucosal Antibody Responses to Soluble and Nanoparticle-Conjugated Antigens Administered Intranasally

Nanoparticles (NPs) are increasingly being used for drug delivery, as well as antigen carriers and immunostimulants for the purpose of developing vaccines. In this work, we examined how intranasal (i.n.) priming followed by i.n. or subcutaneous (s.c.) boosting immunization affects the humoral immune response to chicken ovalbumin (Ova) and Ova conjugated to 20 nm NPs (NP-Ova). We show that i.n. priming with 20 mg of soluble Ova, a dose known to trigger oral tolerance when administered via gastric gavage, induced substantial systemic IgG1 and IgG2c, as well as mucosal antibodies. These responses were further boosted following a s.c. immunization with Ova and complete Freund’s adjuvant (Ova+CFA). In contrast, 100 µg of Ova delivered via NPs induced an IgG1-dominated systemic response, and primed the intestinal mucosa for secretion of IgA. Following a secondary s.c. or i.n. immunization with Ova+CFA or NP-Ova, systemic IgG1 titers significantly increased, and serum IgG2c and intestinal antibodies were induced in mice primed nasally with NP-Ova. Only Ova- and NP-Ova-primed mice that were s.c.-boosted exhibited substantial systemic and mucosal titers for up to 6 months after priming, whereas the antibodies of i.n.-boosted mice declined over time. Our results indicate that although the amount of Ova delivered by NPs was 1000-fold less than Ova delivered in soluble form, the antigen-specific antibody responses, both systemic and mucosal, are essentially identical by 6 months following the initial priming immunization. Additionally, both i.n.- and s.c.-boosting strategies for NP-Ova-primed mice were capable of inducing a polarized Th1/Th2 immune response, as well as intestinal antibodies; however, it is only by using a heterogeneous prime-boost strategy that long-lasting antibody responses were initiated. These results provide valuable insight for future mucosal vaccine development, as well as furthering our understanding of mucosal antibody responses.

Thermoresponsive nanospheres with independent dual drug release profiles for the treatment of osteoarthritis

Dual drug delivery of drugs with different therapeutic effects in a single system is an effective way to treat a disease. One of the main challenges in dual drug delivery is to control the release behavior of each drug independently. In this study, we devised thermo-responsive polymeric nanospheres that can provide simultaneous and independent dual drug delivery in the response to temperature change. The nanospheres based on chitosan oligosaccharide conjugated pluronic F127 grafting carboxyl group were synthesized to deliver kartogenin (KGN) and diclofenac (DCF) in a single system. To achieve the dual drug release, KGN was covalently cross-linked to the outer part of the nanosphere, and DCF was loaded into the inner core of the nanosphere. The nanospheres demonstrated immediate release of DCF and sustained release of KGN, which were independently controlled by temperature change. The nanospheres treated with cold temperature effectively suppressed lipopolysaccharide-induced inflammation in chondrocytes and macrophage-like cells. The nanospheres also induced chondrogenic differentiation of mesenchymal stem cells, which was further enhanced by cold shock treatment. Bioluminescence of the fluorescence-labeled nanospheres was significantly increased after cold treatment in vivo. The nanospheres suppressed the progression of osteoarthritis in treated rats, which was further enhanced by cold treatment. The nanospheres also reduced cyclooxygenase-2 expression in the serum and synovial membrane of treated rats, which were further decreased with cold treatment. These results suggest that the thermo-responsive nanospheres provide dual-function therapeutics possessing anti-inflammatory and chondroprotective effects which can be enhanced by cold treatment.

STATEMENT OF SIGNIFICANCE

We developed thermo-responsive nanospheres that can provide a useful dual-function of suppressing the inflammation and promoting chondrogenesis in the treatment of osteoarthritis. For a dual delivery system to be effective, the release behavior of each drug should be independently controlled to optimize their desired therapeutic effects. We employed rapid release of diclofenac for acute anti-inflammatory effects, and sustained release of kartogenin, a newly found molecule, for chondrogenic effects in this polymeric nanospheres. This nanosphere demonstrated immediate release of diclofenac and sustained release of kartogenin, which were independently controlled by temperature change. The effectiveness of this system to subside inflammation and regenerate cartilage in osteoarthritis was successful demonstrated through in vitro and in vivo experiments in this study. We think that this study will add a new concept to current body of knowledge in the field of drug delivery and treatment of osteoarthritis.

Effect of Experimental Parameters on Alginate/Chitosan Microparticles for BCG Encapsulation

The aim of the present study was to develop novel Mycobacterium bovis bacille Calmette-Guérin (BCG)-loaded polymeric microparticles with optimized particle surface characteristics and biocompatibility, so that whole live attenuated bacteria could be further used for pre-exposure vaccination against Mycobacterium tuberculosis by the intranasal route. BCG was encapsulated in chitosan and alginate microparticles through three different polyionic complexation methods by high speed stirring. For comparison purposes, similar formulations were prepared with high shear homogenization and sonication. Additional optimization studies were conducted with polymers of different quality specifications in a wide range of pH values, and with three different cryoprotectors. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. Chitosan addition to BCG shifted the bacilli surface charge from negative zeta potential values to strongly positive ones. Chitosan of low molecular weight produced particle suspensions of lower size distribution and higher stability, allowing efficient BCG encapsulation and biocompatibility. Particle formulation consistency was improved when the availability of functional groups from alginate and chitosan was close to stoichiometric proportion. Thus, the herein described microparticulate system constitutes a promising strategy to deliver BCG vaccine by the intranasal route.

Peptide KSL-W-Loaded Mucoadhesive Liquid Crystalline Vehicle as an Alternative Treatment for Multispecies Oral Biofilm

Decapeptide KSL-W shows antibacterial activities and can be used in the oral cavity, however, it is easily degraded in aqueous solution and eliminated. Therefore, we aimed to develop liquid crystalline systems (F1 and F2) for KSL-W buccal administration to treat multispecies oral biofilms. The systems were prepared with oleic acid, polyoxypropylene (5) polyoxyethylene (20) cetyl alcohol (PPG-5-CETETH-20), and a 1% poloxamer 407 dispersion as the oil phase (OP), surfactant (S), and aqueous phase (AP), respectively. We characterized them using polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), rheology, and in vitro bioadhesion, and performed in vitro biological analysis. PLM showed isotropy (F1) or anisotropy with lamellar mesophases (F2), confirmed by peak ratio quantification using SAXS. Rheological tests demonstrated that F1 exhibited Newtonian behavior but not F2, which showed a structured AP concentration-dependent system. Bioadhesion studies revealed an AP concentration-dependent increase in the system’s bioadhesiveness (F2 = 15.50 ± 1.00 mN·s) to bovine teeth blocks. Antimicrobial testing revealed 100% inhibition of multispecies oral biofilm growth after KSL-W administration, which was incorporated in the F2 aqueous phase at a concentration of 1 mg/mL. Our results suggest that this system could serve as a potential vehicle for buccal administration of antibiofilm peptides.

Investigation of electrical stimulus on chitosan film based DDS

Controlled drug release is crucial for targeted implant smart drug delivery system (DDS). In this work a chitosan film loaded with green food coloring is fabricated to demonstrate the concepts of drug release using electrical stimulus. A simulation model is also developed to explain the physical phenomena of this drug release using finite element method (FEM). It is found that drug delivery is increased with applied electric field to the electrodes on chitosan film. The AC electrokinetic force generated from electrical excitation is a factor influencing this phenomenon. Several controlled and stimuli experiments are conducted with different electric fields and frequencies. The spectral absorbance of treated solution after the experiment is measured using a spectrophotometer to quantify the dye release. It is verified statistically with 99% level of significance that the amount of dye release has increased with applied electric field. Thus this work has shown that application of electric field can be a potential candidate for controlled DDS using chitosan film.

Intranasal immunization with DNA vaccine coexpressing Der p 1 and ubiquitin in an allergic rhinitis mouse model

BACKGROUND

The worldwide prevalence of allergic rhinitis (AR) is increasing, whereas treatments for AR remain limited in effect. Therefore, a new type of effective drug is eagerly in demand.

OBJECTIVE

To create a hypoallergenic vaccine by forced ubiquitination.

METHODS

In the present study, we constructed a DNA vaccine coexpressing Der p 1 allergen and murine ubiquitin, which used chitosan as a carrier. Through the vitro and vivo experiments, we evaluated its protective efficacy against AR.

RESULTS

The results indicated that the DNA vaccine pVAX1-Ub-Derp1/CS had been successfully constructed. This nanoparticle could not only transfect 293T cells in vitro but also transform cells in vivo. The inflammation of nasal mucosa in an AR murine model via immunization with pVAX1-Ub-Derp1/CS was less severe than those without treatments. Furthermore, it found that mice immunized with pVAX1-Ub-Derp1/CS generated a high level of specific IgG but a low level of specific IgE (P < .01). The significantly increased levels of interferon-γ and the significantly decreased levels of interleukins 4, 10, and 17 indicated that a TH1-type response was elicited by immunization with pVAX1-Ub-Derp1/CS (P < .01). This effect was especially stronger through intranasal immunization.

CONCLUSION

Nasal mucosal immunization and ubiquitination are efficacious strategies to enhance the efficiency and safety of DNA vaccine. The nanoparticle pVAX1-Ub-Derp1/CS is expected to be a new kind of effective vaccine for AR.

Intranasal DNA Vaccine for Protection against Respiratory Infectious Diseases: The Delivery Perspectives

Intranasal delivery of DNA vaccines has become a popular research area recently. It offers some distinguished advantages over parenteral and other routes of vaccine administration. Nasal mucosa as site of vaccine administration can stimulate respiratory mucosal immunity by interacting with the nasopharyngeal-associated lymphoid tissues (NALT). Different kinds of DNA vaccines are investigated to provide protection against respiratory infectious diseases including tuberculosis, coronavirus, influenza and respiratory syncytial virus (RSV) etc. DNA vaccines have several attractive development potential, such as producing cross-protection towards different virus subtypes, enabling the possibility of mass manufacture in a relatively short time and a better safety profile. The biggest obstacle to DNA vaccines is low immunogenicity. One of the approaches to enhance the efficacy of DNA vaccine is to improve DNA delivery efficiency. This review provides insight on the development of intranasal DNA vaccine for respiratory infections, with special attention paid to the strategies to improve the delivery of DNA vaccines using non-viral delivery agents.

Antigen-conjugated N-trimethylaminoethylmethacrylate chitosan nanoparticles induce strong immune responses after nasal administration

PURPOSE

Antigens were conjugated on the surface of N-trimethylaminoethylmethacrylate chitosan (TMC) nanoparticles to induce systemic and mucosal immune responses after nasal immunization.

METHODS

TMC was synthesized by free radical polymerization and blank nanoparticles were prepared by ionic crosslinking of TMC and sodium tripolyphosphate. The model antigen (ovalbumin) was conjugated on the surface of blank nanoparticles (OVA-NP) through thioester bond formation. The cellular uptake of OVA-NP was investigated in Raw 264.7 macrophages and biodistribution of antigens was studied by the radioiodine labeling method. The immunological effects were evaluated by nasal administration of OVA-NP to Balb/C mice. The transport mechanism and nasal toxicity of OVA-NP were studied in rats.

RESULTS

The cellular uptake of OVA-NP was significantly higher than that of ovalbumin-encapsulated nanoparticles (NPe) after 30 min. Nasally administered OVA-NP showed higher transport of antigens to cervical lymph nodes with higher targeting efficiency than all other groups. Compared with NPe, OVA-NP induced much higher levels of systemic and mucosal immune responses in Balb/C mice after three nasal immunizations. Ex vivo culturing of nasopharynx-associated lymphoid tissue (NALT) confirmed its participation in nasal immunization. The transport mechanism study revealed that OVA-NP can be transported across the nasal epithelium through glands and may be taken up in NALT through M cells. OVA-NP did not induce obvious toxicity to nasal mucosa or hemolysis in animals.

CONCLUSION

The present study demonstrated that the conjugation of TMC nanoparticles with antigens is an effective strategy for nasal vaccination.

Nasal-nanotechnology: revolution for efficient therapeutics delivery

CONTEXT

In recent years, nanotechnology-based delivery systems have gained interest to overcome the problems of restricted absorption of therapeutic agents from the nasal cavity, depending upon the physicochemical properties of the drug and physiological properties of the human nose.

OBJECTIVE

The well-tolerated and non-invasive nasal drug delivery when combined with the nanotechnology-based novel formulations and carriers, opens the way for the effective systemic and brain targeting delivery of various therapeutic agents. To accomplish competent drug delivery, it is imperative to recognize the interactions among the nanomaterials and the nasal biological environment, targeting cell-surface receptors, drug release, multiple drug administration, stability of therapeutic agents and molecular mechanisms of cell signaling involved in patho-biology of the disease under consideration.

METHODS

Quite a few systems have been successfully formulated using nanomaterials for intranasal (IN) delivery. Carbon nanotubes (CNTs), chitosan, polylactic-co-glycolic acid (PLGA) and PLGA-based nanosystems have also been studied in vitro and in vivo for the delivery of several therapeutic agents which shown promising concentrations in the brain after nasal administration.

RESULTS AND CONCLUSION

The use of nanomaterials including peptide-based nanotubes and nanogels (NGs) for vaccine delivery via nasal route is a new approach to control the disease progression. In this review, the recent developments in nanotechnology utilized for nasal drug delivery have been discussed.

Formulation and characterization of nanoemulsion intranasal adjuvants: effects of surfactant composition on mucoadhesion and immunogenicity

The development of effective intranasal vaccines is of great interest due to their potential to induce both mucosal and systemic immunity. Here we produced oil-in-water nanoemulsion (NE) formulations containing various cationic and nonionic surfactants for use as adjuvants for the intranasal delivery of vaccine antigens. NE induced immunogenicity and antigen delivery are believed to be facilitated through initial contact interactions between the NE droplet and mucosal surfaces which promote prolonged residence of the vaccine at the site of application, and thus cellular uptake. However, the details of this mechanism have yet to be fully characterized experimentally. We have studied the physicochemical properties of the NE droplet surfactant components and demonstrate that properties such as charge and polar headgroup geometry influence the association of the adjuvant with the mucus protein, mucin. Association of NE droplets with mucin in vitro was characterized by various biophysical and imaging methods including dynamic light scattering (DLS), zeta potential (ZP), and surface plasmon resonance (SPR) measurements as well as transmission electron microscopy (TEM). Emulsion surfactant compositions were varied in a systematic manner to evaluate the effects of hydrophobicity and polar group charge/size on the NE-mucin interaction. Several cationic NE formulations were found to facilitate cellular uptake of the model antigen, ovalbumin (OVA), in a nasal epithelial cell line. Furthermore, fluorescent images of tissue sections from mice intranasally immunized with the same NEs containing green fluorescent protein (GFP) antigen demonstrated that these NEs also enhanced mucosal layer penetration and cellular uptake of antigen in vivo. NE-mucin interactions observed through biophysical measurements corresponded with the ability of the NE to enhance cellular uptake. Formulations that enhanced antigen uptake in vitro and in vivo also led to the induction of a more consistent antigen specific immune response in mice immunized with NEs containing OVA, linking NE-facilitated mucosal layer penetration and cellular uptake to enhancement of the immune response. These findings suggest that biophysical measurement of the mucoadhesive properties of emulsion based vaccines constitutes an effective in vitro strategy for selecting NE candidates for further evaluation in vivo as mucosal adjuvants.

Particulate formulations for the delivery of poly(I:C) as vaccine adjuvant

Current research and development of antigens for vaccination often center on purified recombinant proteins, viral subunits, synthetic oligopeptides or oligosaccharides, most of them suffering from being poorly immunogenic and subject to degradation. Hence, they call for efficient delivery systems and potent immunostimulants, jointly denoted as adjuvants. Particulate delivery systems like emulsions, liposomes, nanoparticles and microspheres may provide protection from degradation and facilitate the co-formulation of both the antigen and the immunostimulant. Synthetic double-stranded (ds) RNA, such as polyriboinosinic acid-polyribocytidylic acid, poly(I:C), is a mimic of viral dsRNA and, as such, a promising immunostimulant candidate for vaccines directed against intracellular pathogens. Poly(I:C) signaling is primarily dependent on Toll-like receptor 3 (TLR3), and on melanoma differentiation-associated gene-5 (MDA-5), and strongly drives cell-mediated immunity and a potent type I interferon response. However, stability and toxicity issues so far prevented the clinical application of dsRNAs as they undergo rapid enzymatic degradation and bear the potential to trigger undue immune stimulation as well as autoimmune disorders. This review addresses these concerns and suggests strategies to improve the safety and efficacy of immunostimulatory dsRNA formulations. The focus is on technological means required to lower the necessary dosage of poly(I:C), to target surface-modified microspheres passively or actively to antigen-presenting cells (APCs), to control their interaction with non-professional phagocytes and to modulate the resulting cytokine secretion profile.

Formulations for Intranasal Delivery of Pharmacological Agents to Combat Brain Disease: A New Opportunity to Tackle GBM?

Despite recent advances in tumor imaging and chemoradiotherapy, the median overall survival of patients diagnosed with glioblastoma multiforme does not exceed 15 months. Infiltration of glioma cells into the brain parenchyma, and the blood-brain barrier are important hurdles to further increase the efficacy of classic therapeutic tools. Local administration methods of therapeutic agents, such as convection enhanced delivery and intracerebral injections, are often associated with adverse events. The intranasal pathway has been proposed as a non-invasive alternative route to deliver therapeutics to the brain. This route will bypass the blood-brain barrier and limit systemic side effects. Upon presentation at the nasal cavity, pharmacological agents reach the brain via the olfactory and trigeminal nerves. Recently, formulations have been developed to further enhance this nose-to-brain transport, mainly with the use of nanoparticles. In this review, the focus will be on formulations of pharmacological agents, which increase the nasal permeation of hydrophilic agents to the brain, improve delivery at a constant and slow release rate, protect therapeutics from degradation along the pathway, increase mucoadhesion, and facilitate overall nasal transport. A mounting body of evidence is accumulating that the underexplored intranasal delivery route might represent a major breakthrough to combat glioblastoma.