Fungal potential for the degradation of petroleum-based polymers: An overview of macro- and microplastics biodegradation

Composting treatment increases the risk of microplastics pollution in process and compost products

Organic compost is a significant carrier of microplastics (MPs) entering agricultural soil. However, the extent of MPs pollution during composting, a widely employed organic waste treatment technology, remains unknown. This study investigated MPs dynamic pollution characteristics during composting and compost products using agricultural wastes as raw materials and quantitatively evaluated ecological risks of MPs pollution. Sorting/screening before and after composting significantly reduced MPs abundance by 29.4 % and 32.1 %, respectively, but substantial quantities of MPs persisted in final compost products. Microplastics were mainly 0.5-1 mm (30.3 %), colored fibers/fragments composed of PP/PE, PE, or PP. Regardless of whether plastics in raw materials were sorted, composting increased MPs abundance from 5133-7867 items kg-1 in raw materials to 5667-11200 items kg-1 in compost products and smaller MPs (<1 mm) proportion from 48.5 % to 54.4 %, while significantly decreased size from 1328 μm to 1093 μm. After composting, MPs exhibited rougher morphologies (folds, cracks, and grooves) and adhered to more mineral colloids, and the pollution level increased. Collectively, composting treatment enhances MPs pollution risk both during composting process and in compost products. These findings present a theoretical reference for the establishment of limit standards for MPs in organic compost.

Fusarium as a promising fungal genus with potential application in bioremediation for pollutants mitigation: A review

Fusarium is genetically diverse and widely distributed geographically. It is one of the genera with more endophytes (which cause no damage to the host plants). This review highlights the capability of Fusarium species to degrade environmental pollutants and describes the biodegradation pathways of some of the emerging environmental contaminants. Some Fusarium species use metabolic strategies enabling them to efficiently mineralize high concentrations of toxic environmental pollutants. These fungi can degrade hydrocarbons, pesticides, herbicides, dyes, pharmaceutical compounds, explosives, plastics, and plastic additives, among other pollutants, and possess high metal biosorption capabilities. According to data from consulted reports, Fusarium strains showed a percentage of biodegradation of a variety of contaminants ranging between 30 % and 100 % for different tested concentrations (from 1 mg to 10 g/L) in a time range between 10 h and 90 d. Enzymes such as esterase, cutinase, laccase, lignin peroxidase, manganese peroxidase, dehydrogenase, lipase, dioxygenase, and phosphoesterase were detected during the pollutant biodegradation process. Fusarium oxysporum, Fusarium solani, and Fusarium culmorum are the most studied species of this genus. Owing to their metabolic versatility, these fungal species and their enzymes represent promising tools for bioremediation applications to mitigate the adverse effects of environmental pollution.

A novel and efficient strategy for the biodegradation of di(2-ethylhexyl) phthalate by Fusarium culmorum

Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer that is used worldwide and raises concerns because of its prevalence in the environment and potential toxicity. Herein, the capability of Fusarium culmorum to degrade a high concentration (3 g/L) of DEHP as the sole carbon and energy source in solid-state fermentation (SSF) was studied. Cultures grown on glucose were used as controls. The biodegradation of DEHP by F. culmorum reached 96.9% within 312 h. This fungus produced a 3-fold higher esterase activity in DEHP-supplemented cultures than in control cultures (1288.9 and 443.2 U/L, respectively). In DEHP-supplemented cultures, nine bands with esterase activity (24.6, 31.2, 34.2, 39.5, 42.8, 62.1, 74.5, 134.5, and 214.5 kDa) were observed by zymography, which were different from those in control cultures and from those previously reported for cultures grown in submerged fermentation. This is the first study to report the DEHP biodegradation pathway by a microorganism grown in SSF. The study findings uncovered a novel biodegradation strategy by which high concentrations of DEHP could be biodegraded using two alternative pathways simultaneously. F. culmorum has an outstanding capability to efficiently degrade DEHP by inducing esterase production, representing an ecologically promising alternative for the development of environmental biotechnologies, which might help mitigate the negative impacts of environmental contamination by this phthalate. KEY POINTS: • F. culmorum has potential to tolerate and remove di(2-ethylhexyl) phthalate (DEHP) • Solid-state fermentation is an efficient system for DEHP degradation by F. culmorum • High concentrations of DEHP induce high levels of esterase production by F. culmorum.

Bacterial degradation of polyethylene and polypropylene microplastics in a mangrove ecosystem

Microplastics (MPs) contamination presents a major environmental challenge, with accumulation of thousands of tons of MPs in ecosystems worldwide posing significant risks to human health and biodiversity. Identifying bacteria capable of degrading MPs offers a promising long-term solution to this issue. While several bacterial strains have demonstrated varying degrees of plastic degradation, the mechanisms underlying these processes remain poorly understood. In this study, 16S rDNA analysis was used to screen ten bacterial strains isolated from mangrove water samples for their potential to degrade MPs. Among these, Bacillus cereus strain ZRY and Pseudochrobactrum saccharolyticum strain ZRY emerged as the most effective candidates. The degradation of polyethylene (PE) and polypropylene (PP) was monitored through weight loss measurements over a 60-day incubation period. B. cereus strain ZRY achieved weight losses of 1.1% for PE and 1.0% for PP, while P. saccharolyticum strain ZRY recorded losses of 0.6% for PE and 0.4% for PP. Morphological and structural changes during degradation were analyzed using scanning electron microscopy, Fourier transform infrared spectroscopy, and atomic force microscopy, which also identified key enzymes produced by both bacterial strains that facilitate the degradation of MPs. Additionally, the effect of pH, salt concentrations, inorganic ions, and incubation duration on degradation efficiency were evaluated. Our findings demonstrate the potential of these bacterial strains for MPs degradation, underscoring their potential for future applications in addressing MP pollution. This research lays the foundation for optimizing conditions to enhance bioremediation efforts utilizing these microbial candidates.

Exploring biodegradable alternatives: microorganism-mediated plastic degradation and environmental policies for sustainable plastic management

Plastics offer versatility, durability and low production costs, but they also pose environmental and health risks due to improper disposal, accumulation in water bodies, low recycling rates and temporal action that causes physicochemical changes in plastics and the release of toxic products to animal health and nature. Some microorganisms may play crucial roles in improving plastic waste management in the future. Cunningamella echinulata has been identified as a promising candidate that remains viable for long periods and produces a cutinase that is capable of degrading plastic. Other recent approaches involving the use of microorganisms are discussed in this review. However, there does not seem to be a single science that is efficient or most appropriate for solving the problem of plastic pollution on the planet at present. Regulations, especially the implementation of different laws that address the entire plastic cycle in different countries, such as Brazil, the USA, China and the European Union, play important roles in the management of this waste and can contribute to reducing this problem. In the context of the transversality of the information compiled here, the current limitations are discussed, and an effective plan is proposed to reduce plastic pollution. Although it is challenging, it involves implementing legislation, promoting sustainable alternatives, improving collection and recycling systems, encouraging reuse, supporting research and technological innovation, promoting corporate responsibility, collaborating globally, raising public awareness, optimizing waste management and, above all, continuously monitoring the progress of actions based on measurable metrics.

Impacts of the coexistence of polystyrene microplastics and pesticide imidacloprid on soil nitrogen transformations and microbial communities

The pollution of agricultural soils by microplastics (MPs) and pesticides has attracted significant attention. However, the combined impact of MPs and pesticides on soil nitrogen transformation and microbial communities remains unclear. In this study, we conducted a 28-day soil incubation experiment, introducing polystyrene microplastics (PS-MPs) at concentrations of 0.1% and 10% (w/w) and pesticide imidacloprid at concentrations of 0.1 mg/kg and 1.0 mg/kg. Our aim was to investigate the individual and combined effects of these pollutants on nitrogen transformations and microbial communities in agricultural soils. Imidacloprid accelerated the decline in soil pH, while PS-MPs slowed the process. Imidacloprid hindered soil nitrification and denitrification processes, however, the presence of PS-MPs mitigated the inhibitory effects of imidacloprid. Based on microbial community and functional annotation analyses, this is mainly attributed to the different effects of PS-MPs and imidacloprid on soil microbial communities and the expression of key nitrogen transformation-related genes. Variance partitioning analysis and partial least squares path modeling analyses revealed that PS-MPs and imidacloprid indirectly influenced the microbial community structure, primarily through changes in soil pH. This study elucidates the mechanism through which the combined stress of MPs and pesticides in agricultural soils influence soil nitrogen transformation and microbial communities. The findings offer valuable insights for the systematic evaluation of the ecological risks posed by the coexistence of these pollutants.

Structure and stability of an apo thermophilic esterase that hydrolyzes polyhydroxybutyrate

Pollution from plastics is a global problem that threatens the biosphere for a host of reasons, including the time scale that it takes for most plastics to degrade. Biodegradation is an ideal solution for remediating bioplastic waste as it does not require the high temperatures necessary for thermal degradation and does not introduce additional pollutants into the environment. Numerous organisms can scavenge for bioplastics, such as polylactic acid (PLA) or poly-(R)-hydroxybutyrate (PHB), which they can use as an energy source. Recently, a promiscuous PHBase from the thermophilic soil bacterium Lihuaxuella thermophila (LtPHBase) was identified. LtPHBase can accommodate many substrates, including PHB granules and films and PHB block copolymers, as well as the unrelated polymers polylactic acid (PLA) and polycaprolactone (PCL). LtPHBase uses the expected Ser-His-Asp catalytic triad for hydrolysis at an optimal enzyme activity near 70°C. Here, the 1.75 Å resolution crystal structure of apo LtPHBase is presented and its chemical stability is profiled. Knowledge of its substrate preferences was extended to different-sized PHB granules. It is shown that LtPHBase is highly resistant to unfolding, with barriers typical for thermophilic enzymes, and shows a preference for low-molecular-mass PHB granules. These insights have implications for the long-term potential of LtPHBase as an industrial PHB hydrolase and shed light on the evolutionary role that this enzyme plays in bacterial metabolism.

Harnessing bio and (Photo)catalysts for microplastics degradation and remediation in soil environment

Soil pollution by microplastics (MPs) is an escalating environmental crisis with far-reaching consequences. However, current research on the degradation and/or remediation of MPs has mainly focused on water-simulated environments, with little attention given to soil MPs. Therefore, the review explores such terrestrial territory, exploring the potential of biodegradation and novel photocatalytic technologies for MPs degradation/remediation in soil. This review comprehensively investigates the potential of biological and photocatalytic approaches for soil MPs degradation and remediation. A temporal analysis of research from 2004 to 2024 highlights the increasing focus on this critical issue. The review explores the biocatalytic roles of diverse enzymes, including cutinase, PETase, MHETase, hydrolase, lipase, laccase, lignin peroxidase, and Mn-peroxidase, in MPs degradation. Strategies for enzyme engineering, such as protein engineering and immobilization, are explored to enhance catalytic efficiency. The potential for developing enzyme consortia for optimized MP degradation is also discussed. Photocatalytic remediation using TiO2, ZnO, clay, hydrogel, and other photocatalysts is examined, emphasizing their mechanisms and effectiveness. Computational modeling is proposed to deepen understanding of soil MPs-catalyst interactions, primarily aiming to develop novel catalysts tailored for soil environments for environmental safety and sustainable restoration. A comparative analysis of biological and photocatalytic approaches evaluates their environmental implications and the potential for synergistic combinations, with emphasis on soil quality protection, restoration and impact on soil ecosystems. Hence, this review accentuates the urgent need for innovative solutions to address MPs pollution in soil and provides a foundational understanding of the current knowledge gaps, as well as paves the way for future research and development.

ATR-FTIR characterisation of daily-use plastics mycodegradation

Synthetic polymers, such as plastics, have permeated all aspects of modern life, and nowadays plastic pollution is a major environmental problem. Mycodegradation of these polymers could represent part of the solution to this problem since it calls on a broad toolbox of enzymes and applies non-enzymatic mechanisms to degrade and deteriorate recalcitrant materials. However, not enough is known about this ability for most of the representatives of the fungal kingdom. Another bottleneck is the harmonisation of technologies to analyse plastic degradation. This work involved the design of a biodegradation experiment, where the potential of four fungi representative of Dikarya and Penicillia (Funalia floccosa, Trametes versicolor, Pycnoporus cinnabarinus and Penicillium oxalicum) were tested on their ability to deteriorate the six most used plastics based on gravimetry and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The following correlation between changes in the band signals and the loss of mass after treatment was determined using polyethylene terephthalate, polypropylene, polyethylene, poly vinyl chloride, high density polyethylene, low density polyethylene and nylon. After treatment, the decrease in absorbance of the characteristic bands of the plastics was taken as an indication of the degradation of the corresponding bonds/functionalities. The four fungi used could transform CH, CH2, CH3, CO, CO, CN, NH and CCl bonds. The best result was obtained using the fungus F. floccosa with 90-day treatments for high density polyethylene (∼ 62.0 %), low density polyethylene (∼ 23.6 %) and nylon (∼ 35.6 %). Therefore, mycodegradation could open up new doors in the fight against plastic pollution.

Effects of incorporating biochar on soil quality and barley yield in microplastics-contaminated soils

Biochar has been recognized for its potential to improve the fertility soils by reducing the reliance on chemical fertilizers, mitigating carbon emissions, and fostering soil microbial growth. This study aimed to evaluate the impact of biochar addition on the physicochemical properties of arid and semi-arid soils containing microplastics, while also assessing its effect on Barley (Hordeum vulgare) yield under drought stress. The experiment was conducted in a glass greenhouse. Plastic pots containing 3 kg of soil were each planted with 6 barley grains. Biochar was applied at three doses (B0 = 0 g biochar/kg soil, B1 = 6 g biochar/kg soil, B2 = 10 g biochar/kg soil), while microplastics were added at three levels (M0 = Control without microplastics, M1 = 0.5 g/kg soil, and M2 = 1 g/kg soil) on the same sowing date. Water stress was induced when the plants reached the four-leaf stage. ANOVAs and Tukey post-hoc tests were employed for multiple mean comparisons of soil and plant parameters. Drought stress and microplastics negatively influenced soil parameters namely soil moisture, organic carbon, and nitrates, while also affecting electrical conductivity and pH. Biochar exhibited minimal effect on soil properties but significantly altered pH, nitrates, and total CaCO3. Plant chlorophyll levels decreased under stress, particularly with microplastic dose M1. However, biochar and microplastics enhanced chlorophyll a content, except for dose B1 of biochar, which leads to a decrease in chlorophyll b (0.91 ± 0.138 μg/g FM). Microplastics, at dose M2, improved chlorophyll b content (1.11 ± 0.090 μg/g FM). Aboveground biomass, leaf area, and yield were generally unaffected by tested stresses. Nonetheless, barley grain yield decreased in biochar and microplastic dose M1 (0.47 ± 0.108 g/plant), while it improved with microplastic dose M2 (0.65 ± 0.168 g/plant). Leaf relative water content increased under water stress and microplastics but not with biochar alone. Interaction between microplastics and biochar enhanced plant water content. Drought stress and microplastics diminished soil parameters, whereas biochar lowered nitrates and pH without significantly affecting soil organic carbon. Plant productivity parameters generally exhibited no significant change under water stress, microplastics, or biochar, except for yield and chlorophyll pigments.

Determination of Biodegradation Potential of Aspergillus niger, Candida albicans, and Acremonium sclerotigenum on Polyethylene, Polyethylene Terephthalate, and Polystyrene Microplastics

Plastics are used widely in almost every field of life, but their synthetic and persistent nature makes them harmful for the environment. The aim of this research was to evaluate the degradation abilities of Aspergillus niger, Candida albicans, and Acremonium sclerotigenum on microplastics (MPs). MP pieces of 4 ± 1 mm, including polyethylene, polyethylene terephthalate, and polystyrene, were incubated with fungal inoculums for 30 days. The degradation of treated MPs was determined by biofilm formation, weight loss, scanning electron microscopy (SEM), and Fourier transform analyses. The results indicated that the polyethylene MPs treated with Aspergillus niger exhibited the highest level of biofilm formation (optical density 1.595) and percentage weight loss (16%). In the case of polyethylene terephthalate and polystyrene MPs, Acremonium sclerotigenum and co-culture showed weight loss of 6% and 10%, respectively. Candida albicans was observed to be the least effective in biodegradation analyses. SEM observation revealed the surface modifications as holes, pits, cracks, and increased roughness in treated MPs. Fourier transform infrared (FTIR) spectroscopy showed that the chemical structure of each polymer exhibited some variations. The study concluded that the fungal strains play an important role in the biodegradation of plastics and can be utilized to mitigate environmental pollution.

Strain selection and adaptation of a fungal-yeast-microalgae consortium for sustainable bioethanol production and wastewater treatment from livestock wastewater

This study explores the potential of strain selection and adaptation for developing a fungi-yeast-microalgae consortium capable of integrated bioethanol production and livestock wastewater treatment. We employed a multi-stage approach involving isolation and strain selection/adaptation of these consortiums. The study started with screening some isolated fungi to grow on the cellulosic biomass of the livestock wastewater (saccharification) followed by a fermentation process using yeast for bioethanol production. The results revealed that Penicillium chrysogenum (Cla) and Saccharomyces cerevisiae (Sc) produced a remarkable 99.32 ppm of bioethanol and a concentration of glucose measuring 0.56 mg ml- 1. Following the impact of fungi and yeast, we diluted the livestock wastewater using distilled water and subsequently inoculated Nile River microalgae into the wastewater. The findings demonstrated that Chlorella vulgaris emerged as the dominant species in the microalgal community. Particularly, the growth rate reached its peak at a 5% organic load (0.105385), indicating that this concentration provided the most favorable conditions for the flourishing of microalgae. The results demonstrated the effectiveness of the microalgal treatment in removing the remaining nutrients and organic load, achieving a 92.5% reduction in ammonia, a 94.1% reduction in nitrate, and complete removal of phosphate (100%). The algal treatment also showed remarkable reductions in COD (96.5%) and BOD (96.1%). These findings underscore the potential of fungi, yeast, and Nile River microalgae in the growth and impact on livestock wastewater, with the additional benefit of bioethanol production.

Omic-driven strategies to unveil microbiome potential for biodegradation of plastics: a review

Plastic waste accumulation has lately been identified as the leading and pervasive environmental concern, harming all living beings, natural habitats, and the global market. Given this issue, developing ecologically friendly solutions, such as biodegradation instead of standard disposal, is critical. To effectively address and develop better strategies, it is critical to understand the inter-relationship between microorganisms and plastic, the role of genes and enzymes involved in this process. However, the complex nature of microbial communities and the diverse mechanisms involved in plastic biodegradation have hindered the development of efficient plastic waste degradation strategies. Omics-driven approaches, encompassing genomics, transcriptomics and proteomics have revolutionized our understanding of microbial ecology and biotechnology. Therefore, this review explores the application of omics technologies in plastic degradation studies and discusses the key findings, challenges, and future prospects of omics-based approaches in identifying novel plastic-degrading microorganisms, enzymes, and metabolic pathways. The integration of omics technologies with advanced molecular technologies such as the recombinant DNA technology and synthetic biology would guide in the optimization of microbial consortia and engineering the microbial systems for enhanced plastic biodegradation under various environmental conditions.

Continuously enhanced versatile nanocellulose films enabled by sustaining CO2 capture and in-situ calcification

Cellulose possesses numerous favorable peculiarities to replace petroleum-based materials. Nevertheless, the extremely high hygroscopicity of cellulose severely degrades their mechanical performance, which is a major obstacle to the production of high-strength, multi-functional cellulose-based materials. In this work, a simple strategy was proposed to fabricate durable versatile nanocellulose films based on sustaining CO2 capture and in-situ calcification. In this strategy, Ca(OH)2 was in-situ formed on the films by Ca2+ crosslinking and subsequent introduction of OH-, which endowed the films with high mechanical strength and carbon sequestration ability. The following CO2 absorption process continuously improved the water resistance and durability of the films, and enabled them to maintain excellent mechanical properties and promising light management ability. After a 30-day CO2 absorption process, the water contact angle of the films can be increased from 43° to 79°, and the weight gain rate of the films in a 30 h water-absorption process can be sharply decreased from 331.2 % to 52.2 %. The films could maintain a high tensile strength of 340 MPa, and result in a CO2 absorption rate of 3.5 mmol/gcellulose after 30 days. In this study, the improvement of durability and carbon sequestration of nanocellulose films was achieved by a simple and effective method.

Surface-programmed microbiome assembly in phycosphere to microplastics contamination

Recalcitrance in microplastics accounts for ubiquitous white pollution. Of special interest are the capabilities of microorganisms to accelerate their degradation sustainably. Compared to the well-studied pure cultures in degrading natural polymers, the algal-bacterial symbiotic system is considered as a promising candidate for microplastics removal, cascading bottom-up impacts on ecosystem-scale processes. This study selected and enriched the algae-associated microbial communities hosted by the indigenous isolation Desmodesmus sp. in wastewater treatment plants with micro-polyvinyl chloride, polyethylene terephthalate, polyethylene, and polystyrene contamination. Results elaborated that multiple settled and specific affiliates were recruited by the uniform algae protagonist from the biosphere under manifold microplastic stress. Alteration of distinct chemical functionalities and deformation of polymers provide direct evidence of degradation in phycosphere under illumination. Microplastic-induced phycosphere-derived DOM created spatial gradients of aromatic protein, fulvic and humic acid-like and tryptophan components to expanded niche-width. Surface thermodynamic analysis was conducted to simulate the reciprocal and reversible interaction on algal-bacterial and phycosphere-microplastic interface, revealing the enhancement of transition to stable and irreversible aggregation for functional microbiota colonization and microplastics capture. Furthermore, pangenomic analysis disclosed the genes related to the chemotaxis and the proposed microplastics biodegradation pathway in enriched algal-bacterial microbiome, orchestrating the evidence for common synthetic polymer particles and ultimately to confirm the effectiveness and potential. The present study emphasizes the necessity for future endeavors aimed at fully leveraging the potential of algal-bacterial mutualistic systems within sustainable bioremediation strategies targeting the eradication of microplastic waste.

Interaction of Micro- and Nanoplastics with Enzymes: The Case of Carbonic Anhydrase

Microplastics (MPs) and nanoplastics (NPs) have emerged as significant environmental pollutants with potential detrimental effects on ecosystems and human health. Several studies indicate their interaction with enzymes; this topic represents a multifaceted research field encompassing several areas of interest from the toxicological and ecotoxicological impact of MPs and NPs on humans and wildlife to the biodegradation of plastics by microbial enzymes. This review aims to provide a critical analysis of the state-of-the-art knowledge of the interaction of MPs and NPs on the enzyme carbonic anhydrase (CA), providing recent insights, analyzing the knowledge gaps in the field, and drawing future perspectives of the research and its application. CA is a widespread and crucial enzyme in various organisms; it is critical for various physiological processes in animals, plants, and bacteria. It catalyzes the reversible hydration of CO2, which is essential for respiration, acid-base balance, pH homeostasis, ion transport, calcification, and photosynthesis. Studies demonstrate that MPs and NPs can inhibit CA activity with mechanisms including adsorption to the enzyme surface and subsequent conformational changes. In vitro and in silico studies highlight the role of electrostatic and hydrophobic interactions in these processes. In vivo studies present mixed results, which are influenced by factors like particle type, size, concentration, and organism type. Moreover, the potentiality of the esterase activity of CA for plastic degradation is discussed. The complexity of the interaction between CA and MPs/NPs underscores the need for further research to fully understand the ecological and health impacts of MPs and NPs on CA activity and expression and glimpses of the potentiality and perspectives in this field.

Critical review on unveiling the toxic and recalcitrant effects of microplastics in aquatic ecosystems and their degradation by microbes

Production of synthetic plastic obtained from fossil fuels are considered as a constantly growing problem and lack in the management of plastic waste has led to severe microplastic pollution in the aquatic ecosystem. Plastic particles less than 5mm are termed as microplastics (MPs), these are pervasive in water and soil, it can also withstand longer period of time with high durability. It can be broken down into smaller particles and can be adsorbed by various life-forms. Most marine organisms tend to consume plastic debris that can be accumulated easily into the vertebrates, invertebrates and planktonic entities. Often these plastic particles surpass the food chain, resulting in the damage of various organs and inhibiting the uptake of food due to the accumulation of microplastics. In this review, the physical and chemical properties of microplastics, as well as their effects on the environment and toxicity of their chemical constituents are discussed. In addition, the paper also sheds light on the potential of microorganisms such as bacteria, fungi, and algae which play a pivotal role in the process of microplastics degradation. The mechanism of microbial degradation, the factors that affect degradation, and the current advancements in genetic and metabolic engineering of microbes to promote degradation are also summarized. The paper also provides information on the bacterial, algal and fungal degradation mechanism including the possible enzymes involved in microplastic degradation. It also investigates the difficulties, limitations, and potential developments that may occur in the field of microbial microplastic degradation.

Biodegradation of low-density polyethylene by mixed fungi composed of Alternaria sp. and Trametes sp. isolated from landfill sites

With the development of industry and modern manufacturing, nondegradable low-density polyethylene (LDPE) has been widely used, posing a rising environmental hazard to natural ecosystems and public health. In this study, we isolated a series of LDPE-degrading fungi from landfill sites and carried out LDPE degradation experiments by combining highly efficient degrading fungi in pairs. The results showed that the mixed microorganisms composed of Alternaria sp. CPEF-1 and Trametes sp. PE2F-4 (H-3 group) had a greater degradation effect on heat-treated LDPE (T-LDPE). After 30 days of inoculation with combination strain H-3, the weight loss rate of the T-LDPE film was approximately 154% higher than that of the untreated LDPE (U-LDPE) film, and the weight loss rate reached 0.66 ± 0.06%. Environmental scanning electron microscopy (ESEM) and Fourier transform infrared spectroscopy (FTIR) were used to further investigate the biodegradation impacts of T-LDPE, including the changes on the surface and depolymerization of the LDPE films during the fungal degradation process. Our findings revealed that the combined fungal treatment is more effective at degrading T-LDPE than the single strain treatment, and it is expected that properly altering the composition of the microbial community can help lessen the detrimental impact of plastics on the environment.

Screening of polyurethane-degrading microbes using a quenching fluorescence probe by microfluidic droplet sorting

Excessive use of polyurethane (PU) polymers has led contributed to serious environmental pollution. The plastic recycling technology using microorganisms and enzymes as catalysts offers a promising green and low-carbon approach for managing plastic waste. However, current methods for screening PU-degrading strains suffer from drawbacks such as being time-consuming and inefficient. Herein, we present a novel approach for screening PU-degrading microorganisms using a quenching fluorescent probe along with the fluorescence-activated droplet sorting (FADS). The FPAP could specifically recognize the 4,4'-methylenedianiline (MDA) derivates released from PU degradation, with fluorescence quenching as a response. Based on the approach, we successfully screen two PU-degrading strains (Burkholderia sp. W38 and Bacillus sp. C1). After 20 d of cultivation, strain W38 and C1 could degrade 41.58% and 31.45% of polyester-PU film, respectively. Additionally, three metabolites were identified during the degradation of PU monomer (2,4-toluene diamine, 2,4-TDA) and a proposed degradation pathway was established. Consequently, the fluorescence probe integrated with microfluidic droplet systems, demonstrates potential for the development of innovative PU-biocatalysts. Furthermore, the identification of the 2,4-TDA degradation pathway provides valuable insights that can propel advancements in the field of PU biodegradation.

Migration and accumulation of microplastics in soil-plant systems mediated by symbiotic microorganisms and their ecological effects

The coexistence of microorganisms in complex soil environments greatly affects the environmental behavior and ecological effects of microplastics (MPs). However, relevant studies are sparse, and internal mechanisms remain unclear. Herein, arbuscular mycorrhizal fungi (AMF), a common symbiotic microorganism in the soil-plant system, was proved to significantly affect MPs absorption and migration with a "size effect". Specifically, the existence of AMF accelerated small-sized MPs (0.5 μm) uptake but slowed large-sized MPs (2 μm) uptake in lettuce. The content of 0.5 μm MPs absorbed by plants with AMF was 1.26 times that of the non-AMF group, while the content of 2 μm MPs was only 77.62 % that of non-AMF group. Additionally, the different effects of microorganisms on the intake content of MPs with different particle sizes in plants also led to different toxic effects of MPs on lettuce, that is, AMF exacerbated small-size MPs toxicity in lettuce (e.g., reduced plant biomass, photosynthesis, etc), and it weakened large-sized MPs toxicity (e.g., increased plant height, antioxidant enzyme activity, etc). The above phenomenon mainly because of the change in AMF on the plant root structure, which can be visually observed through the intraradical and extraradical hyphae. The symbiotic structure (hyphae) formed by AMF and host plants root could enhance the absorption pathway for small-sized MPs in lettuce, although not for large-sized MPs. Additionally, the effects of AMF varied with the soil environment of differently sized MPs, which promoted the migration of small-particle MPs to plants but aggravated large-particle MPs fixation at the soil interface. These findings could deepen the understanding of MPs pollution in terrestrial systems and provide theoretical basis and technical support to accurately assess soil MPs pollution.

Enhanced degradation of phototreated recycled and unused low-density polyethylene films by Pleurotus ostreatus

Polyethylene, one of the most used petroleum-derived polymers, causes serious environmental pollution. The ability of Pleurotus ostreatus to degrade UV-treated and untreated recycled and unused (new) low-density polyethylene (LDPE) films was studied. We determined the fungal biomass production, enzyme production, and enzyme yield. Changes in the chemical structure and surface morphology of the LDPE after fungal growth were analyzed using FTIR spectroscopy and SEM. Functional group indices and contact angles were also evaluated. In general, the highest Lac (6013 U/L), LiP (2432 U/L), MnP (995 U/L) and UP (6671 U/L) activities were observed in irradiated recycled LDPE (IrRPE). The contact angle of all samples was negatively correlated with fermentation time; the smaller the contact angle, the longer the fermentation time, indicating effective biodegradation. The IrRPE samples exhibited the smallest contact angle (49°) at 4 weeks, and the samples were fragmented (into two pieces) at 5 weeks. This fungus could degrade unused (new) LDPE significantly within 6 weeks. The biodegradation of LDPE proceeded faster in recycled than in unused samples, which can be enhanced by exposing LDPE to UV radiation. Enzymatic production during fungal growth suggest that LDPE degradation is initiated by laccase (Lac) followed by lignin peroxidase (LiP), whereas manganese peroxidase (MnP) and unspecific peroxygenase (UP) are involved in the final degradation process. This is the first experimental study on the fungal growth and its main enzymes involved in LDPE biodegradation. This fungus has great promise as a safe, efficient, and environmentally friendly organism capable of degrading LDPE.

Bioactive composite films with improved antioxidant and barrier properties prepared from sodium alginate and deep eutectic solvent treated distillers' grains

In this work, a straightforward approach utilizing distillers' grains (DG) waste and sodium alginate (SA) was developed to prepare functional and bioactive packaging films. Deep eutectic solvents (DESs) were initially synthesized from choline chloride (CO), betaine (BO), glycerol (GO), and oxalic acid. Composite films were then prepared from DES-treated DG slurry and SA at different ratios. Characterization and analysis revealed that adding 75 % CO-treated DG slurry reduced the water vapor permeability (WVP) by over 66 % compared to that of the SA film. Composite films containing CO/BO-treated DG slurry had an ultraviolet light barrier rate exceeding 99 %, while those with 75 % DES-treated DG slurry demonstrated excellent antioxidant activity, with a 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) free radical scavenging rate of 80.14 %-88.35 %, representing a 322.45 %-365.73 % increase compared to that of the pure SA film. These composite films also exhibited favorable mechanical properties (31.58 MPa, 5.53 % EB), thermal stability, and biodegradability, extending the shelf life of grapes by 1.8 times. In conclusion, bioactive composite films derived from DES-treated DG are expected to replace petroleum-based plastics, enhancing sustainable biomass use and environmental responsibility.

Biodegradation of e-waste microplastics by Penicillium brevicompactum

Electronic and electric waste (e-waste) management strategies often fall short in dealing with the plastic constituents of printed circuit boards (PCB). Some plastic materials from PCB, such as epoxy resins, may release contaminants, but neither potential environmental impact has been assessed nor mitigation strategies have been put forward. This study assessed the biodegradation of microplastics (1-2 mm in size) from PCB by the fungus Penicillium brevicompactum over 28 days, thus contributing to the discussion of mitigation strategies for decreasing the environmental impact of such plastics in the environment. The capacity of P. brevicompactum to induce microplastic fragmentation and degradation has been determined by the increased the number of smaller-sized particles and microplastic mass reduction (up to 75 % within 14 days), respectively. The occurrence of chain scission and oxidation of microplastics exposed to P. brevicompactum when compared with the control conditions (which occurred only after 28 days of exposure) can be observed. Furthermore, Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy performed in dried biomass put in evidence an increase in the absorption intensities in regions that could be attributed to functional groups associated with carbohydrates. The results underline the potential role of the genus Penicillium, particularly P. brevicompactum, in the biodegradation of microplastics from PCB, thus providing the basis for further exploration of its potential for e-waste bioremediation and research on the underlying mechanisms for sustainable approaches to mitigate e-waste pollution.

Hotspots lurking underwater: Insights into the contamination characteristics, environmental fates and impacts on biogeochemical cycling of microplastics in freshwater sediments

The widespread presence of microplastics (MPs) in aquatic environments has become a significant concern, with freshwater sediments acting as terminal sinks, rapidly picking up these emerging anthropogenic particles. However, the accumulation, transport, degradation and biochemical impacts of MPs in freshwater sediments remain unresolved issues compared to other environmental compartments. Therefore, this paper systematically revealed the spatial distribution and characterization information of MPs in freshwater (rivers, lakes, and estuaries) sediments, in which small-size (<1 mm), fibers, transparent, polyethylene (PE), and polypropylene (PP) predominate, and the average abundance of MPs in river sediments displayed significant heterogeneity compared to other matrices. Next, the transport kinetics and drivers of MPs in sediments are summarized, MPs transport is controlled by the particle diversity and surrounding environmental variability, leading to different migration behaviors and transport efficiencies. Also emphasized the spatio-temporal evolution of MPs degradation processes and biodegradation mechanisms in sediments, different microorganisms can depolymerize high molecular weight polymers into low molecular weight biodegradation by-products via secreting hydrolytic enzymes or redox enzymes. Finally, discussed the ecological impacts of MPs on microbial-nutrient coupling in sediments, MPs can interfere with the ecological balance of microbially mediated nutrient cycling by altering community networks and structures, enzyme activities, and nutrient-related functional gene expressions. This work aims to elucidate the plasticity characteristics, fate processes, and potential ecological impact mechanisms of MPs in freshwater sediments, facilitating a better understanding of environmental risks of MPs in freshwater sediments.

Ecological effect of microplastics on soil microbe-driven carbon circulation and greenhouse gas emission: A review

Soil organic carbon (SOC) pool, the largest part of terrestrial ecosystem, controls global terrestrial carbon balance and consequently presented carbon cycle-climate feedback in climate projections. Microplastics, (MPs, <5 mm) as common pollutants in soil ecosystems, have an obvious impact on soil-borne carbon circulation by affecting soil microbial processes, which play a central role in regulating SOC conversion. In this review, we initially presented the sources, properties and ecological risks of MPs in soil ecosystem, and then the differentiated effects of MPs on the component of SOC, including dissolved organic carbon, soil microbial biomass carbon and easily oxidized organic carbon varying with the types and concentrations of MPs, the soil types, etc. As research turns into a broader perspective, greenhouse gas emissions dominated by the mineralization of SOC coming into view since it can be significantly affected by MPs and is closely associated with soil microbial respiration. The pathways of MPs impacting soil microbes-driven carbon conversion include changing microbial community structure and composition, the functional enzyme's activity and the abundance and expression of functional genes. However, numerous uncertainties still exist regarding the microbial mechanisms in the deeper biochemical process. More comprehensive studies are necessary to explore the affected footprint and provide guidance for finding the evaluation criterion of MPs affecting climate change.

Progress and Prospects of Microplastic Biodegradation Processes and Mechanisms: A Bibliometric Analysis

In order to visualize the content and development patterns of microplastic biodegradation research, the American Chemical Society (ACS), Elsevier, Springer Link, and American Society for Microbiology (ASM) were searched for the years 2012-2022 using Citespace and VOSvivewer for bibliometrics and visual analysis. The biodegradation processes and mechanisms of microplastics were reviewed on this basis. The results showed a sharp increase in the number of publications between 2012 and 2022, peaking in 2020-2021, with 62 more publications than the previous decade. The University of Chinese Academy of Sciences (UCAS), Northwest A&F University (NWAFU), and Chinese Academy of Agricultural Sciences (CAAS) are the top three research institutions in this field. Researchers are mainly located in China, The United States of America (USA), and India. Furthermore, the research in this field is primarily concerned with the screening of functional microorganisms, the determination of functional enzymes, and the analysis of microplastic biodegradation processes and mechanisms. These studies have revealed that the existing functional microorganisms for microplastic biodegradation are bacteria, predominantly Proteobacteria and Firmicutes; fungi, mainly Ascomycota; and some intestinal microorganisms. The main enzymes secreted in the process are hydrolase, oxidative, and depolymerization enzymes. Microorganisms degrade microplastics through the processes of colonization, biofilm retention, and bioenzymatic degradation. These studies have elucidated the current status of and problems in the microbial degradation of microplastics, and provide a direction for further research on the degradation process and molecular mechanism of functional microorganisms.

Colonization and Biodegradation Potential of Fungal Communities on Immersed Polystyrene vs. Biodegradable Plastics: A Time Series Study in a Marina Environment

Plastic pollution of the ocean is a major environmental threat. In this context, a better understanding of the microorganisms able to colonize and potentially degrade these pollutants is of interest. This study explores the colonization and biodegradation potential of fungal communities on foamed polystyrene and alternatives biodegradable plastics immersed in a marina environment over time, using the Brest marina (France) as a model site. The methodology involved a combination of high-throughput 18S rRNA gene amplicon sequencing to investigate fungal taxa associated with plastics compared to the surrounding seawater, and a culture-dependent approach to isolate environmentally relevant fungi to further assess their capabilities to utilize polymers as carbon sources. Metabarcoding results highlighted the significant diversity of fungal communities associated with both foamed polystyrene and biodegradable plastics, revealing a dynamic colonization process influenced by the type of polymer and immersion time. Notably, the research suggests a potential for certain fungal species to utilize polymers as a carbon source, emphasizing the need for further exploration of fungal biodegradation potential and mechanisms.

Proteomics of Penicillium chrysogenum for a Deeper Understanding of Lead (Pb) Metal Bioremediation

Penicillium chrysogenum (P. chrysogenum), a ubiquitous filamentous fungus, has demonstrated remarkable potential in the bioremediation of lead-contaminated environments. Its inherent tolerance and bioaccumulation capacity for lead (Pb), coupled with its relatively rapid growth rate, make it an attractive candidate for bioremediation applications. This study aims to identify the proteomic changes in P. chrysogenuminduced by Pb metal stress and unravel the roles of identified proteins in molecular mechanisms and cellular responses. Untargeted proteomic analysis was carried out using a two-dimensional difference in gel electrophoresis (2D-DIGE) coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). This study reported the identification of 43 statistically significant proteins (24 upregulated and 19 downregulated, ANOVA, p ≤ 0.05; fold change ≥1.5) in P. chrysogenum as a consequence of Pb treatment. Proteins were grouped according to their function into 18 groups from which 13 proteins were related to metabolism, 11 were related to cellular process and signaling, and 19 proteins were related to information storage and processing. The current study is considered the first report about the proteomics study of P. chrysogenum under Pb stress conditions, where upregulated proteins could better explain the mechanism of tolerance and Pb toxicity removal. Our research has provided a thorough understanding of the molecular and cellular processes involved in fungal-metal interactions, paving the way for the development of innovative molecular markers for heavy metal myco-remediation. To the best of our knowledge, this study of P. chrysogenum provides valuable insights toward growing research in comprehending the metal-microbe interactions. This will facilitate development of novel molecular markers for metal bioremediation.

Microplastics and environmental effects: investigating the effects of microplastics on aquatic habitats and their impact on human health

Microplastics (MPs) are particles with a diameter of <5 mm. The disposal of plastic waste into the environment poses a significant and pressing issue concern globally. Growing worry has been expressed in recent years over the impact of MPs on both human health and the entire natural ecosystem. MPs impact the feeding and digestive capabilities of marine organisms, as well as hinder the development of plant roots and leaves. Numerous studies have shown that the majority of individuals consume substantial quantities of MPs either through their dietary intake or by inhaling them. MPs have been identified in various human biological samples, such as lungs, stool, placenta, sputum, breast milk, liver, and blood. MPs can cause various illnesses in humans, depending on how they enter the body. Healthy and sustainable ecosystems depend on the proper functioning of microbiota, however, MPs disrupt the balance of microbiota. Also, due to their high surface area compared to their volume and chemical characteristics, MPs act as pollutant absorbers in different environments. Multiple policies and initiatives exist at both the domestic and global levels to mitigate pollution caused by MPs. Various techniques are currently employed to remove MPs, such as biodegradation, filtration systems, incineration, landfill disposal, and recycling, among others. In this review, we will discuss the sources and types of MPs, the presence of MPs in different environments and food, the impact of MPs on human health and microbiota, mechanisms of pollutant adsorption on MPs, and the methods of removing MPs with algae and microbes.

The essential role of aggregation for the emulsifying ability of a fungal CYS-rich protein

Biosurfactants are in demand by the global market as natural commodities suitable for incorporation into commercial products or utilization in environmental applications. Fungi are promising producers of these molecules and have garnered interest also for their metabolic capabilities in efficiently utilizing recalcitrant and complex substrates, like hydrocarbons, plastic, etc. Within this framework, biosurfactants produced by two Fusarium solani fungal strains, isolated from plastic waste-contaminated landfill soils, were analyzed. Mycelia of these fungi were grown in the presence of 5% olive oil to drive biosurfactant production. The characterization of the emulsifying and surfactant capacity of these extracts highlighted that two different components are involved. A protein was purified and identified as a CFEM (common in fungal extracellular membrane) containing domain, revealing a good propensity to stabilize emulsions only in its aggregate form. On the other hand, an unidentified cationic smaller molecule exhibits the ability to reduce surface tension. Based on the 3D structural model of the protein, a plausible mechanism for the formation of very stable aggregates, endowed with the emulsifying ability, is proposed. KEY POINTS: • Two Fusarium solani strains are analyzed for their surfactant production. • A cationic surfactant is produced, exhibiting the ability to remarkably reduce surface tension. • An identified protein reveals a good propensity to stabilize emulsions only in its aggregate form.

Myco-remediation of plastic pollution: current knowledge and future prospects

To date, enumerable fungi have been reported to participate in the biodegradation of several notorious plastic materials following their isolation from soil of plastic-dumping sites, marine water, waste of mulch films, landfills, plant parts and gut of wax moth. The general mechanism begins with formation of hydrophobin and biofilm proceding to secretion of specific plastic degarding enzymes (peroxidase, hydrolase, protease and urease), penetration of three dimensional substrates and mineralization of plastic polymers into harmless products. As a result, several synthetic polymers including polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyurethane and/or bio-degradable plastics have been validated to deteriorate within months through the action of a wide variety of fungal strains predominantly Ascomycota (Alternaria, Aspergillus, Cladosporium, Fusarium, Penicillium spp.). Understanding the potential and mode of operation of these organisms is thus of prime importance inspiring us to furnish an up to date view on all the presently known fungal strains claimed to mitigate the plastic waste problem. Future research henceforth needs to be directed towards metagenomic approach to distinguish polymer degrading microbial diversity followed by bio-augmentation to build fascinating future of waste disposal.

Bio-based polyester-polyurethane foams: synthesis and degradability by Aspergillus niger and Aspergillus clavatus

In this article, the degradability by Aspergillus niger and Aspergillus clavatus of three bio-based polyurethane (PU) foams is compared to previous degradability studies involving a Pseudomonas sp. bacterium and similar initial materials (Spontón et al. in Int. Biodet. Biodeg. 85:85-94, 2013, https://doi.org/10.1016/j.ibiod.2013.05.019 ). First, three new polyester-polyurethane foams were prepared from mixtures of castor oil (CO), maleated castor oil (MACO), toluene diisocyanate (TDI), and water. Then, their degradation tests were carried out in an aqueous medium, and employing the two mentioned fungi, after their isolation from the environment. From the degradation tests, the following was observed: (a) the insoluble (and slightly collapsed) foams exhibited free hydroxyl, carboxyl, and amine moieties; and (b) the water soluble (and low molar mass) compounds contained amines, carboxylic acids, and glycerol. The most degraded foam contained the highest amount of MACO, and therefore the highest concentration of hydrolytic bonds. A basic biodegradation mechanism was proposed that involves hydrolysis and oxidation reactions.

Variation of Young's modulus suggested the main active sites for four different aging plastics at an early age time

Precisely determining which bonds are more sensitive when plastic aging occurs is critical to better understand the mechanisms of toxic release and microplastics formation. However, the relationship between chemical bonds with the active aging sites changes and the aging behavior of plastics at an early age is still unclear. Herein, the mechanical behavior of four polymers with different substituents was characterized by the high-resolution AFM. Young's modulus (YM) changes suggested that the cleavage of C-Cl bonds in PVC, C-H bonds in PE and PP, and C-F bonds in PTFE are the main active aging sites for plastic aging. The aging degree of the plastics followed the order of PVC > PP > PE > PTFE. Two aging periods exhibited different YM change behavior, the free radical and cross-linking resulted in a minor increase in YM during the initiation period. Numerous free radicals formed and cross-linking reaction happened, causing a significant increase in YM during the propagation period. Raman spectroscopy verified the formation of microplastics. This research develops promising strategies to quantitatively evaluate the aging degrees using AFM and establish the relationship between chemical bonds and mechanical behavior, which would provide new method to predict plastic pollution in actual environments.

Enhancing soil health and nutrient cycling through soil amendments: Improving the synergy of bacteria and fungi

The synergy between bacteria and fungi is a key determinant of soil health and have a positive effect on plant development under drought conditions, with the potentially enhancing the sustainability of amending soil with natural materials. However, identifying how soil amendments influence plant growth is often difficult due to the complexity of microorganisms and their links with different soil amendment types and environmental factors. To address this, we conducted a field experiment to examine the impact of soil amendments (biochar, Bacillus mucilaginosus, Bacillus subtilis and super absorbent polymer) on plant growth. We also assessed variations in microbial community, links between fungi and bacteria, and soil available nutrients, while exploring how the synergistic effects between fungus and bacteria influenced the response of soil amendments to plant growth. This study revealed that soil amendments reduced soil bacterial diversity but increased the proportion of the family Enterobacteriaceae, Nitrosomonadaceae, and also increased soil fungal diversity and the proportion of the sum of the family Lasiosphaeriaceae, Chaetomiaceae, Pleosporaceae. Changes in soil microbial communities lead to increase the complexity of microbial co-occurrence networks. Furthermore, this heightened network complexity enhanced the synergy of soil bacteria and fungi, supporting bacterial functions related to soil nutrient cycling, such as metabolic functions and genetic, environmental, and cellular processes. Hence, the BC and BS had 3.0-fold and 0.5-fold greater root length densities than CK and apple tree shoot growth were increased by 62.14 %,50.53 % relative to CK, respectively. In sum, our results suggest that the synergistic effect of bacteria and fungi impacted apple tree growth indirectly by modulating soil nutrient cycling. These findings offer a new strategy for enhancing the quality of arable land in arid and semi-arid regions.

An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook

Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Microplastics and nanoplastics: Source, behavior, remediation, and multi-level environmental impact

Plastics introduced into the natural environment persist, degrade, and fragment into smaller particles due to various environmental factors. Microplastics (MPs) (ranging from 1 μm to 5 mm) and nanoplastics (NPs) (less than 1 μm) have emerged as pollutants posing a significant threat to all life forms on Earth. Easily ingested by living organisms, they lead to ongoing bioaccumulation and biomagnification. This review summarizes existing studies on the sources of MPs and NPs in various environments, highlighting their widespread presence in air, water, and soil. It primarily focuses on the sources, fate, degradation, fragmentation, transport, and ecotoxicity of MPs and NPs. The aim is to elucidate their harmful effects on marine organisms, soil biota, plants, mammals, and humans, thereby enhancing the understanding of the complex impacts of plastic particles on the environment. Additionally, this review highlights remediation technologies and global legislative and institutional measures for managing waste associated with MPs and NPs. It also shows that effectively combating plastic pollution requires the synergization of diverse management, monitoring strategies, and regulatory measures into a comprehensive policy framework.

Recent advances in microbial and enzymatic engineering for the biodegradation of micro- and nanoplastics

This review examines the escalating issue of plastic pollution, specifically highlighting the detrimental effects on the environment and human health caused by microplastics and nanoplastics. The extensive use of synthetic polymers such as polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) has raised significant environmental concerns because of their long-lasting and non-degradable characteristics. This review delves into the role of enzymatic and microbial strategies in breaking down these polymers, showcasing recent advancements in the field. The intricacies of enzymatic degradation are thoroughly examined, including the effectiveness of enzymes such as PETase and MHETase, as well as the contribution of microbial pathways in breaking down resilient polymers into more benign substances. The paper also discusses the impact of chemical composition on plastic degradation kinetics and emphasizes the need for an approach to managing the environmental impact of synthetic polymers. The review highlights the significance of comprehending the physical characteristics and long-term impacts of micro- and nanoplastics in different ecosystems. Furthermore, it points out the environmental and health consequences of these contaminants, such as their ability to cause cancer and interfere with the endocrine system. The paper emphasizes the need for advanced analytical methods and effective strategies for enzymatic degradation, as well as continued research and development in this area. This review highlights the crucial role of enzymatic and microbial strategies in addressing plastic pollution and proposes methods to create effective and environmentally friendly solutions.

The programmed sequence-based oxygenase screening for polypropylene degradation

Enzymatic degradation of plastic is an effective means of plastic recycling and pollution control. However, the strong chemical inertness of polypropylene plastic (PP) severely impedes its oxidative cleavage, making it resistant to degradation. In this study, based on sequence screening of Hidden Markov Model (HMM), a dioxygenase (HIS1) was identified and characterized to be effective in PP oxidation. Various kinds of PP products, including plastic films, microplastics, and disposable water cups or bags, were HIS1-degraded with cracks and holes on the surface. The hydrophobic binding was the primary force driving oxidative degradation in the specific cavity of HIS1. The discovery of HIS1 achieved a zero breakthrough in PP biodegradation, providing a promising candidate for the selection and evolution of degrading enzymes.

The effects of Micro/Nano-plastics exposure on plants and their toxic mechanisms: A review from multi-omics perspectives

In recent years, plastic pollution has become a global environmental problem, posing a potential threat to agricultural ecosystems and human health, and may further exacerbate global food security problems. Studies have revealed that exposure to micro/nano-plastics (MPs/NPs) might cause various aspects of physiological toxicities, including plant biomass reduction, intracellular oxidative stress burst, photosynthesis inhibition, water and nutrient absorption reduction, cellular and genotoxicity, seed germination retardation, and that the effects were closely related to MP/NP properties (type, particle size, functional groups), exposure concentration, exposure duration and plant characteristics (species, tissue, growth stage). Based on a brief review of the physiological toxicity of MPs/NPs to plant growth, this paper comprehensively reviews the potential molecular mechanism of MPs/NPs on plant growth from perspectives of multi-omics, including transcriptome, metabolome, proteome and microbiome, thus to reveal the role of MPs/NPs in plant transcriptional regulation, metabolic pathway reprogramming, protein translational and post-translational modification, as well as rhizosphere microbial remodeling at multiple levels. Meanwhile, this paper also provides prospects for future research, and clarifies the future research directions and the technologies adopted.

Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions

Microplastics (MPs) pollution has emerged as a critical environmental issue with far-reaching consequences for ecosystems and human health. These are plastic particles measuring <5 mm and are categorized as primary and secondary based on their origin. Primary MPs are used in various products like cosmetics, scrubs, body wash, and toothpaste, while secondary MPs are generated through the degradation of plastic products. These have been detected in seas, rivers, snow, indoor air, and seafood, posing potential risks to human health through the food chain. Detecting and quantifying MPs are essential to understand their distribution and abundance in the environment. Various microscopic (fluorescence microscopy, scanning electron microscopy) and spectroscopy techniques (FTIR, Raman spectroscopy, X-ray photoelectron spectroscopy) have been reported to analyse MPs. Despite the challenges in scalable removal methods, biological systems have emerged as promising options for eco-friendly MPs remediation. Algae, bacteria, and fungi have shown the potential to adsorb and degrade MPs in wastewater treatment plants (WWTPs) offering hope for mitigating this global crisis. This review examines the sources, impacts, detection, and biological removal of MPs, highlighting future directions in this crucial field of environmental conservation. By fostering global collaboration and innovative research a path towards a cleaner and healthier planet for future generations can be promised.

Unraveling the threat: Microplastics and nano-plastics' impact on reproductive viability across ecosystems

Plastic pollution pervades both marine and terrestrial ecosystems, fragmenting over time into microplastics (MPs) and nano-plastics (NPs). These particles infiltrate organisms via ingestion, inhalation, and dermal absorption, predominantly through the trophic interactions. This review elucidated the impacts of MPs/NPs on the reproductive viability of various species. MPs/NPs lead to reduced reproduction rates, abnormal larval development and increased mortality in aquatic invertebrates. Microplastics cause hormone secretion disorders and gonadal tissue damage in fish. In addition, the fertilization rate of eggs is reduced, and the larval deformity rate and mortality rate are increased. Male mammals exposed to MPs/NPs exhibit testicular anomalies, compromised sperm health, endocrine disturbances, oxidative stress, inflammation, and granulocyte apoptosis. In female mammals, including humans, exposure culminates in ovarian and uterine deformities, endocrine imbalances, oxidative stress, inflammation, granulosa cell apoptosis, and tissue fibrogenesis. Rodent offspring exposed to MPs experience increased mortality rates, while survivors display metabolic perturbations, reproductive anomalies, and weakened immunity. These challenges are intrinsically linked to the transgenerational conveyance of MPs. The ubiquity of MPs/NPs threatens biodiversity and, crucially, jeopardizes human reproductive health. The current findings underscore the exigency for comprehensive research and proactive interventions to ameliorate the implications of these pollutants.

Setting new standards: Multiphasic analysis of microplastic mineralization by fungi

Plastic materials provide numerous benefits. However, properties such as durability and resistance to degradation that make plastic attractive for variable applications likewise foster accumulation in the environment. Fragmentation of plastics leads to the formation of potentially hazardous microplastic, of which a considerable amount derives from polystyrene. Here, we investigated the biodegradation of polystyrene by the tropical sooty mold fungus Capnodium coffeae in different experimental setups. Growth of C. coffeae was stimulated significantly when cultured in presence of plastic polymers rather than in its absence. Stable isotope tracing using 13C-enriched polystyrene particles combined with cavity ring-down spectroscopy showed that the fungus mineralized polystyrene traces. However, phospholipid fatty acid stable isotope probing indicated only marginal assimilation of polystyrene-13C by C. coffeae in liquid cultures. NMR spectroscopic analysis of residual styrene contents prior to and after incubation revealed negligible changes in concentration. Thus, this study suggests a plastiphilic life style of C. coffeae despite minor usage of plastic as a carbon source and the general capability of sooty mold fungi to stimulate polystyrene mineralization, and proposes new standards to identify and unambiguously demonstrate plastic degrading capabilities of microbes.

Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.

Phylloplane fungus Curvularia dactyloctenicola VJP08 effectively degrades commercially available PS product

Polystyrene (PS), a widely produced plastic with an extended carbon (C-C) backbone that resists microbial attack, is produced in enormous quantities throughout the World. Naturally occurring plasticizers such as plant cuticle and lignocelluloses share similar properties to synthetic plastics such as hydrophobicity, structural complexity, and higher recalcitrance to degradation. In due course of time, phytopathogenic fungi have evolved strategies to overcome these limitations and utilize lignocellulosic waste for their nutrition. The present investigation focuses on the utilization of phylloplane fungus, Curvularia dactyloctenicola VJP08 towards its ability to colonize and degrade commercially available PS lids. The fungus was observed to densely grow onto PS samples over an incubation period of 30 days. The morphological changes showcased extensive fungal growth with mycelial imbrication invading the PS surface for carbon extraction leading to the appearance of cracks and holes in the PS surface. It was further confirmed by EDS analysis which indicated that carbon was extracted from PS for the fungal growth. Further, 3.57% decrease in the weight, 8.8% decrease in the thickness and 2 °C decrease in the glass transition temperature (Tg) confirmed alterations in the structural integrity of PS samples by the fungal action. GC-MS/MS analysis of the treated PS samples also showed significant decrease in the concentration of benzene and associated aromatic derivatives confirming the degradation of PS samples and subsequent utilization of generated by-products by the fungus for growth. Overall, the present study confirmed the degradation and utilization of commercially available PS samples by phylloplane fungus C. dactyloctenicola VJP08. These findings establish a clear cross-assessment of the phylloplane fungi for their prospective use in the development of degradation strategies of synthetic plastics.

Application of carbon-based adsorbents in the remediation of micro- and nanoplastics

Micro-nano plastics (MNPs) are emerging contaminants that can easily enter the food chain, posing risks to both the aquatic ecosystem and human health. Various physical, biological, and chemical methods have been explored to remove MNPs from water, and recently, adsorption technology has gained attention as an effective approach. Among the potential candidates, carbon-based adsorbent has emerged as a promising choice due to their low cost, eco-friendly nature, and sustainability. This paper summarizes recent advancements in MNP removal using carbon-based adsorbents, with a focus on the modification methods and adsorption mechanisms. Additionally, the factors influencing the adsorption performance and the methods for characterizing the adsorption mechanism are analyzed. Finally, the advantages and disadvantages of carbon-based adsorbents over other adsorbents are discussed, along with the current state of sustainable recycling and future research prospects.

Differential fungal assemblages and functions between the plastisphere of biodegradable and conventional microplastics in farmland

The heterogeneity of plastisphere and soil can lead to variation in microbiome, potentially impacting soil functions. Current studies of the plastisphere have mainly focused on bacterial communities, and fungal communities are poorly understood. Biodegradable and conventional microplastics may recruit specific microbial taxa due to their different biodegradability. Herein, we collected polyethylene (PE) and polybutylene adipate terephthalate/polylactide (PBAT/PLA) microplastics in farmland (Hebei, China) and characterized the fungal community in PE and PBAT/PLA plastisphere. Results from high-throughput sequencing showed significantly lower alpha diversity and distinct composition of fungal community in PBAT/PLA plastisphere compared to PE plastisphere. Additionally, the PBAT/PLA plastisphere demonstrated a significant enrichment of fungal taxa with potential plastic-degrading capability such as Nectriaceae, Pleosporaceae and Didymellaceae. The stochasticity of drift (28.7-43.5 %) and dispersal limitation (38.6-39.4 %) were dominant in the assembly of PE and PBAT/PLA plastisphere fungal community. Higher stable and more complex network in PBAT/PLA plastispheres were observed as compared to PE plastisphere. Besides, the total relative abundance of plant and animal pathogens were higher in PBAT/PLA plastisphere than that in PE plastisphere, suggesting that biodegradable microplastics may pose a higher threat to soil health. This study contributes to our understanding of the characteristics of plastisphere fungal communities in soil environments and the associated risks to terrestrial ecosystems resulting from microplastic accumulation.

Lacustrine plastisphere: Distinct succession and assembly processes of prokaryotic and eukaryotic communities and role of site, time, and polymer types

Microplastics as a carrier can promote microbial diffusion, potentially influencing the ecological functions of microbial communities in aquatic environments. However, our understanding of the assembly mechanism of microbial communities on different microplastic polymers in freshwater lakes during succession is still insufficient, especially for the eukaryotes. Here, the colonization time, site, and polymer types of microplastics were comprehensively considered to investigate the composition and assembly of prokaryotic and eukaryotic communities and their driving factors during the lacustrine plastisphere formation. Results showed that the particle-associated microorganisms in water were the main source of the plastisphere prokaryotes, while the free-living microorganisms in water mainly accounted for the plastisphere eukaryotes. The response of prokaryotic communities to different microplastic polymers was stronger than eukaryotic communities. The assembly of plastisphere prokaryotic communities was dominated by homogenizing processes (mainly homogenous selection), while the assembly of eukaryotic communities was dominated by differentiating processes (mainly dispersal limitation). Colonization time was an important factor affecting the composition of prokaryotic and eukaryotic communities during the formation of the plastisphere. The Chao1 richness of prokaryotic communities in the plastisphere increased with the increase of colonization time, whereas the opposite was true in eukaryotic communities. This differential response of species diversity and composition of prokaryotic and eukaryotic communities in the plastisphere during dynamic succession could lead to their distinct assembly processes. Overall, the results suggest that distinct assembly of microbial communities in the plastisphere may depend more on specific microbial sub-communities and colonization time than polymer types and colonization site.

Characterization of Priestia megaterium S1, a polymer degrading gut microbe isolated from the gut of Tenebrio molitor larvae fed on Styrofoam

This study reveals that Tenebrio molitor larvae are fed with two different feeds i.e., barley bran along with Styrofoam, and barley bran without Styrofoam, the survival percentage of mealworms shows 86 and 89%, respectively. Five isolates namely S1, S2, S3, S4, and S5 were isolated from the gut of Styrofoam-feeding Tenebrio molitor larvae and tested for Hydrophobicity percentage, clear zone assay and turbidity measurement. S1 isolate showed best (turbidity percentage of 19.65%, 13.54% hydrophobicity percentage, and 37% zone of clearance) when compared to other isolates, respectively. 16S rRNA characterization of S1 isolate revealed that the isolate belongs to Priestia megaterium S1(ON024787). Biodegradation of PE and PS beads by Priestia megaterium S1 makes physical and structural changes over 180 days, after microbial adhesion to the beads. Growth parameters have shown that the Priestia megaterium S1 thrives more effectively in the pH (6.5), temperature (28 °C) and at 1.5% LDPE/HDPE/PS concentration there is maximum utilization of carbon and a high percentage survival rate. Significant colonization of the isolate after 30 days over beads of LDPE (52.47%), HDPE (49.26%), and PS (48.11%), respectively. Experimental data revealed that Priestia megaterium S1 have PE and PS beads degradation capacity, proven by weight loss studies, at 6th-month percentage weight loss of LDPE (36.1%), HDPE (31.9%), and PS (28.6%), the percentage loss of carbon and hydrogen shows higher when compared to control. One month Biological Oxygen Demand (BOD) showed that LDPE (7.4 mg/l), HDPE (7.2 mg/l), PS (6.7 mg/l), and simultaneous studies on CO2 evolution over LDPE treatment is 5.05 g/l, HDPE (4.26 g/l), and PS (3.91 g/l), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) prove the occurrence of biodegradation on the surface of beads. This work highlights that Priestia megaterium S1 plays a vital role in effectively degrading PE and PS beads.

Deciphering the role of fungus in degradation of polypropylene from hospital waste

Health and environmental consequences are unavoidable when it comes to management of hospital waste (HW) disposables. In order to eradicate the HW, this study isolated a novel fungus SPF21 from a hospital dumping yard to degrade Polypropylene (PP). We measured the attributes of PP inoculated with fungus using mass loss, Fourier trans-form infrared (FTIR), contact angle (CA), and scanning electron microscopy (SEM). The weight of PP exposed to SPF21 was reduced by 25% in 90 days. The SEM images reveal that there are pores all over the sample surface; they alsocaused voids during the biodegradation of PP. FTIR analysis indicates that the spectra of treated mask pieces show the absence of peak at 1746 cm-1 and the appearance of a new peak at 1643 cm-1 . A period of 90-day exposure to the fungal isolate SPF21 reduced the CA of PP by 44.8% when compared to the nonexposed PP samples, suggesting that the surface of PP turned more hydrophilic after exposure. Moreover, our study on PP degradation by the fungus Ascotricha sinuosa SPF21 appears to be promising from the perspective of environmental, health, and economic hazards. Our results indicate that biodegradation greatly facilitates fungus deposition and changes PP film morphology and hydrophilicity.