Sexual dimorphism affects tibia size and shape but not tissue-level mechanical properties

Changes in diaphyseal cross-sectional properties with age in macaques

OBJECTIVES

The present study seeks to quantify changes in long bone cross-sectional properties in a colony of semi-free-ranging rhesus macaques and compare observed aging patterns to those of other primates, including humans.

METHODS

Peripheral quantitative computed tomography was used to obtain midshaft cross sections of the femora, tibiae, humeri, and radii of 115 macaque specimens ranging from 7 to 31 years of age. Linear regressions of cross-sectional properties on age were analyzed. An analysis of covariance was conducted to quantify differences in rates of change between males and females.

RESULTS

Results show that medullary area increases while cortical area decreases with age in both sexes. The polar section modulus and the polar strain-strength index, measuring torsional and bending strength, show no decline in most sections but decrease significantly with age in the hindlimb elements of female macaques. Volumetric bone mineral density (vBMD) also decreases with age in both male and female macaques; however, the cumulative change in vBMD over the adult lifespan is relatively small, equivalent to a less than 10% decrease in material strength. An analysis of covariance shows no differences between males and females in the rate of change of properties with age.

DISCUSSION

Overall, this study shows that there are some similarities in the skeletal aging patterns of macaques and those of other primates, including humans, but also some differences, with greater losses of bone found in human females as a result of an extended post-reproductive period that is generally not found among wild or semi-wild macaques.

Is Regional Bone Mineral Density the Differentiating Factor Between Femoral Neck and Femoral Trochanteric Fractures?

Background Osteoporosis is globally recognized as a prevalent bone disease, and proximal femoral fractures constitute a serious complication associated with it. In recent years, the frequency of hip fractures has increased rapidly, with ramifications that extend into the social and economic aspects of both patients' lives and healthcare systems. The primary goal of this study is to discover whether bone mineral density (BMD) in specific regions of the hip could be related to femoral neck or trochanteric fractures. Methodology This prospective cohort study employed dual-energy X-ray absorptiometry (DEXA) measurements on 70 individuals with proximal femoral fractures. The participants sought treatment at the emergency department of our unit for hip fractures and adhered to our predefined eligibility criteria. These criteria primarily included (i) age exceeding 60 years and (ii) a diagnosis of either femoral neck or trochanteric fracture attributed to (iii) a low-energy lateral fall and (iv) a previously established state of complete ambulation before the occurrence of the fracture. In this context, we recorded the BMD of the hip, as well as the BMD values of the upper and lower halves of the neck, trochanteric region, and diaphysis. For the comparison of the categorical variables, Pearson's χ2 criterion was used, whereas Student's t-test was applied for the comparison of means of quantitative variables across fracture types. Results No statistical differences were identified when comparing regional BMDs and T-scores with the fracture type. This conclusion was also reconfirmed concerning age, gender, and Tonnis classification. Only a moderate correlation was observed, demonstrating lower values of regional BMDs in women compared to men. Conclusions The inability of our study to establish a direct correlation between BMD measurements across diverse areas of the proximal femur underlines the imperative need for subsequent investigations. These studies should not only integrate more precise techniques for measuring and mapping the BMD of different hip regions but should also encompass a comprehensive examination that would consider both intrinsic and extrinsic characteristics of the proximal femur.

miR181a/b-1 controls osteocyte metabolism and mechanical properties independently of bone morphology

Bone derives its ability to resist fracture from bone mass and quality concurrently; however, many questions about the molecular mechanisms controlling bone quality remain unanswered, limiting the development of diagnostics and therapeutics. Despite the increasing evidence on the importance of miR181a/b-1 in bone homeostasis and disease, whether and how osteocyte-intrinsic miR181a/b-1 controls bone quality remains elusive. Osteocyte-intrinsic deletion of miR181a/b-1 in osteocytes in vivo resulted in compromised overall bone mechanical behavior in both sexes, although the parameters affected by miR181a/b-1 varied distinctly based on sex. Furthermore, impaired fracture resistance in both sexes was unexplained by cortical bone morphology, which was altered in female mice and intact in male mice with miR181a/b-1-deficient osteocytes. The role of miR181a/b-1 in the regulation of osteocyte metabolism was apparent in bioenergetic testing of miR181a/b-1-deficient OCY454 osteocyte-like cells and transcriptomic analysis of cortical bone from mice with osteocyte-intrinsic ablation of miR181a/b-1. Altogether, this study demonstrates the control of osteocyte bioenergetics and the sexually dimorphic regulation of cortical bone morphology and mechanical properties by miR181a/b-1, hinting at the role of osteocyte metabolism in the regulation of mechanical behavior.

Sex differences in linear bone measurements occur following puberty but do not influence femoral or tibial torsion

Torsional, angular, and linear measurements in a paediatric population are clinically important but not well defined and understood. Different methods of measurement and discrepancies between assessors leads to a lack of understanding of what should be defined as typical or atypical for the growing skeleton. From a large dataset of 333 paediatric CT scans, we extracted three-dimensional torsional, angular, and linear measurements from the pelvis, femur, and tibia/fibula. Sex differences in linear measurements were observed in bones of children aged 13+ (around puberty), but femoral and tibial torsion were similar between males and females. The rotational profile (femoral anteversion minus tibial torsion) tended to increase with growth. Epicondylar, condylar, and malleolar widths were smaller in females than males for the same bone length after the age of 13 years, which could explain why females may be more at risk for sport injuries during adolescence. This rich dataset can be used as an atlas for researchers and clinicians to understand typical development of critical rotational profiles and linear bone measurements in children.

Sex disparities in tibia-fibula geometry and density are associated with elevated bone strain in females: A cross-validation study

Females are up to four times more likely to sustain a stress fracture than males. Our previous work, using statistical appearance modeling in combination with the finite element method, suggested that sex-related differences in tibial geometry may increase bone strain in females. The purpose of this study was to cross-validate these findings, by quantifying sex-related differences in tibia-fibula bone geometry, density, and finite element-predicted bone strain in a new cohort of young physically active adults. CT scans of the lower leg were collected for fifteen males (23.3 ± 4.3 years, 1.77 ± 0.09 m, 75.6 ± 10.0 kg) and fifteen females (22.9 ± 3.0 years, 1.67 ± 0.07 m, 60.9 ± 6.7 kg). A statistical appearance model was fit to each participant's tibia and fibula. The average female and male tibia-fibula complex, controlled for isotropic scaling, were then calculated. Bone geometry, density, and finite element-predicted bone strains in running were compared between the average female and male. The new cohort illustrated the same patterns as the cohort from the previous study: the tibial diaphysis of the average female was narrower and had greater cortical bone density. Peak strain and the volume of bone experiencing ≥4000 με were 10 % and 80 % greater, respectively, in the average female when compared to the average male, which was driven by a narrower diaphysis. The sex-related disparities in tibial geometry, density, and bone strain described by our previous model were also observed in this entirely new cohort. Disparities in tibial diaphysis geometry likely contribute to the elevated stress fracture risk observed in females.

Reference Intervals for Bone Impact Microindentation in Healthy Adults: A Multi-Centre International Study

Impact microindentation (IMI) is a novel technique for assessing bone material strength index (BMSi) in vivo, by measuring the depth of a micron-sized, spherical tip into cortical bone that is then indexed to the depth of the tip into a reference material. The aim of this study was to define the reference intervals for men and women by evaluating healthy adults from the United States of America, Europe and Australia. Participants included community-based volunteers and participants drawn from clinical and population-based studies. BMSi was measured on the tibial diaphysis using an OsteoProbe in 479 healthy adults (197 male and 282 female, ages 25 to 98 years) across seven research centres, between 2011 and 2018. Associations between BMSi, age, sex and areal bone mineral density (BMD) were examined following an a posteriori method. Unitless BMSi values ranged from 48 to 101. The mean (± standard deviation) BMSi for men was 84.4 ± 6.9 and for women, 79.0 ± 9.1. Healthy reference intervals for BMSi were identified as 71.0 to 97.9 for men and 59.8 to 95.2 for women. This study provides healthy reference data that can be used to calculate T- and Z-scores for BMSi and assist in determining the utility of BMSi in fracture prediction. These data will be useful for positioning individuals within the population and for identifying those with BMSi at the extremes of the population.

Female bone physiology resilience in a past Polynesian Outlier community

Remodelling is a fundamental biological process involved in the maintenance of bone physiology and function. We know that a range of health and lifestyle factors can impact this process in living and past societies, but there is a notable gap in bone remodelling data for populations from the Pacific Islands. We conducted the first examination of femoral cortical histology in 69 individuals from ca. 440-150 BP Taumako in Solomon Islands, a remote 'Polynesian Outlier' island in Melanesia. We tested whether bone remodelling indicators differed between age groups, and biological sex validated using ancient DNA. Bone vascular canal and osteon size, vascular porosity, and localised osteon densities, corrected by femoral robusticity indices were examined. Females had statistically significantly higher vascular porosities when compared to males, but osteon densities and ratios of canal-osteon (~ 8%) did not differ between the sexes. Our results indicate that, compared to males, localised femoral bone tissue of the Taumako females did not drastically decline with age, contrary to what is often observed in modern populations. However, our results match findings in other archaeological samples-a testament to past female bone physiology resilience, also now observed in the Pacific region.

Bone stress injuries

Bone stress injuries, including stress fractures, are overuse injuries that lead to substantial morbidity in active individuals. These injuries occur when excessive repetitive loads are introduced to a generally normal skeleton. Although the precise mechanisms for bone stress injuries are not completely understood, the prevailing theory is that an imbalance in bone metabolism favours microdamage accumulation over its removal and replacement with new bone via targeted remodelling. Diagnosis is achieved by a combination of patient history and physical examination, with imaging used for confirmation. Management of bone stress injuries is guided by their location and consequent risk of healing complications. Bone stress injuries at low-risk sites typically heal with activity modification followed by progressive loading and return to activity. Additional treatment approaches include non-weight-bearing immobilization, medications or surgery, but these approaches are usually limited to managing bone stress injuries that occur at high-risk sites. A comprehensive strategy that integrates anatomical, biomechanical and biological risk factors has the potential to improve the understanding of these injuries and aid in their prevention and management.

Effects of Raloxifene and tibial loading on bone mass and mechanics in male and female mice

Purpose: Raloxifene (RAL) is a selective estrogen receptor modulator (SERM) that has previously been shown to cause acellular benefits to bone tissue. Due to these improvements, RAL was combined with targeted tibial loading to assess if RAL treatment during periods of active bone formation would allow for further mechanical enhancements.Methods: Structural, mechanical, and microstructural effects were assessed in bone from C57BL/6 mice that were treated with RAL (0.5 mg/kg), tibial loading, or both for 6 weeks, beginning at 10 weeks of age.Results:Ex vivo microcomputed tomography (CT) images indicated RAL and loading work together to improve bone mass and architecture, especially within the cancellous region of males. Increases in cancellous bone volume fraction were heavily driven by increases in trabecular thickness, though there were some effects on trabecular spacing and number. In the cortical regions, RAL and loading both increased cross-sectional area, cortical area, and cortical thickness. Whole-bone mechanical testing primarily indicated the effects of loading. Further characterization through Raman spectroscopy and nanoindentation showed load-based changes in mineralization and micromechanics, while both loading and RAL caused changes in the secondary collagen structure. In contrast to males, in females, there were large load-based effects in the cancellous and cortical regions, resulting in increased whole-bone mechanical properties. RAL had less of an effect on cancellous and cortical architecture, though some effects were still present.Conclusion: RAL and loading work together to impact bone architecture and mechanical integrity, leading to greater improvements than either treatment individually.

Age and Sex Differences in Load-Induced Tibial Cortical Bone Surface Strain Maps

Bone adapts its architecture to the applied load; however, it is still unclear how bone mechano‐adaptation is coordinated and why potential for adaptation adjusts during the life course. Previous animal models have suggested strain as the mechanical stimulus for bone adaptation, but yet it is unknown how mouse cortical bone load‐related strains vary with age and sex. In this study, full‐field strain maps (at 1 N increments up to 12 N) on the bone surface were measured in young, adult, and old (aged 10, 22 weeks, and 20 months, respectively), male and female C57BL/6J mice with load applied using a noninvasive murine tibial model. Strain maps indicate a nonuniform strain field across the tibial surface, with axial compressive loads resulting in tension on the medial side of the tibia because of its curved shape. The load‐induced surface strain patterns and magnitudes show sexually dimorphic changes with aging. A comparison of the average and peak tensile strains indicates that the magnitude of strain at a given load generally increases during maturation, with tibias in female mice having higher strains than in males. The data further reveal that postmaturation aging is linked to sexually dimorphic changes in average and maximum strains. The strain maps reported here allow for loading male and female C57BL/6J mouse legs in vivo at the observed ages to create similar increases in bone surface average or peak strain to more accurately explore bone mechano‐adaptation differences with age and sex. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC. on behalf of American Society for Bone and Mineral Research.

Age and gender related differences in load-strain response in C57Bl/6 mice

We examined the changes in mechanical strain response of male and female mouse tibia and ulna, using axial compression tests, to assess age-related changes in tibiae and ulnae by a non-contact strain measurement technique called the digital image correlation (DIC) and the standard strain gage. A unique aspect of the study was to compare bones from the same animal to study variations in behavior with aging. This study was conducted using male and female C57Bl/6 mice at 6, 12 and 22 months of age (N=6-7 per age and sex) using three load levels. The DIC technique was able to detect a greater number of statistically significant differences in comparison to the strain gaging method. Male ulna showed significantly higher DIC strains compared to strains captured from strain gage at all three levels of load at 6 months and in the lowest load at 12 months. DIC measurements revealed that the ulna becomes stiffer with aging for both males and females, which resulted in 0.4 to 0.8 times reduced strains in the 22-month group compared to the 6 month group. Male tibia showed three-fold increased strains in the 22 months group at 11.5 N load compared to 6 months group (p<.05).

Normative Data for Impact Microindentation for Australian Men: Cross-Sectional Data From the Geelong Osteoporosis Study

Impact microindentation (IMI) is a novel technique for assessing the bone material strength index (BMSi) in vivo. However, no studies have presented normative data for BMSi. The aim of this study was to develop such normative data using a population-based sample of men, randomly selected from electoral rolls for the Barwon Statistical Division in southeastern Australia to participate in the Geelong Osteoporosis Study. BMSi was measured on the tibial plateau using an OsteoProbe in 405 men (ages 33 to 96 years) during the period 2016 to 2019. Associations between BMSi, age, and anthropometry were examined using linear regression models. BMSi values ranged from 49.0 to 100.5. BMSi was negatively correlated with age (r = -0.152, p = 0.002), weight (r = -0.103, p = 0.039), and BMI (r = -0.187, p < 0.001), and positively correlated with height (r = +0.107, p = 0.032). Mean ± SD BMSi was 82.6 ± 7.0 for the whole group, and ranged from 85.6 ± 6.0 for ages 30 to 39 years to 79.8 ± 6.6 for ages 80+ years. This study provides normative data that can be used to calculate T- and Z-scores for BMSi. These data will be useful for identifying men with low BMSi. Further research is warranted to derive optimal cut points for BMSi that discriminate fracture risk. © 2020 The Authors. JBMR Plus published by Wiley Periodicals LLC. on behalf of American Society for Bone and Mineral Research.

Age-Related Variations in Volar Cortical Angle of the Distal Radius

Background: The ideal volar locking plate for the treatment of distal radius fracture should anatomically fit the volar surface of the distal radius. The purpose of this study was to measure the volar cortical angle (VCA) of uninjured adult distal radii to determine how well the VCA matches that of modern volar locking plates and whether variations in the VCA are related to demographic factors. Methods: A retrospective radiographic analysis of 273 uninjured adult distal radii was performed. Patients were stratified into age quintiles: less than 27 years, 27 to 43 years, 44 to 51 years, 52 to 64 years, and 65 years or older. The VCA was measured on lateral wrist radiographs, and patient demographics, including age and sex, were collected. Multivariable linear regression analyses were performed to determine the relationship between VCA and demographic factors. Results: The VCA ranged from 23.2° to 42.6°, with a mean of 32.2° (SD = 3.79). Mean VCA was 32.8 (SD = 4.17) in the youngest cohort (<27 years) and 30.4 (SD = 3.63) in the oldest cohort (>65 years). Mean VCA decreased with age, approximately 0.04° per year after adjusting for sex. Men had a 1.6° greater VCA than women after adjusting for age. Conclusion: Mean VCA was greater than the VCA of modern volar locking plates. The VCA decreased with age in both men and women, and men had a greater VCA than women. Such differences must be taken into account to avoid malreduction, tendon irritation, or intra-articular screw placement using current volar plate designs.

Sex differences in the patterning of age-related bone loss in the human hallucal metatarsal in rural and urban populations

OBJECTIVES

Age-degenerative features of the metatarsals are poorly known despite the importance of metatarsal bone properties for investigating mobility patterns. We assessed the role of habitual activity in shaping the patterning and magnitude of sexual dimorphism in age-related bone loss in the hallucal metatarsal.

MATERIALS AND METHODS

Cross-sections were extracted at midshaft from micro-computed tomography scan models of individuals from medieval rural (Abingdon Vineyard) and early industrial urban (Spitalfields) settings (n = 71). A suite of cross-sectional geometry dimensions and biomechanical properties were compared between populations.

RESULTS

The rural group display generally stronger and larger metatarsals that show a greater capacity to resist torsion and that have comparatively greater bending strength along the medio-lateral plane. Men in both groups show greater values of cortical area than women, but only in the urban group do men show lower magnitudes of age-related decline compared to females. Women in rural and urban populations show different patterns of age-related decline in bone mass, particularly old women in the urban group show a marked decline in cortical area that is absent for women in the rural group.

DISCUSSION

Lifetime exposure to hard, physical activity in an agricultural setting has contributed to the attainment of greater bone mass and stronger bones in young adults. Furthermore, over the life-course, less of this greater amount of bone is lost, such that sustained activity levels may have acted to buffer against age-related decline, and this is most pronounced for women, who are expected to experience greater bone loss later in life than men.

Absence of an osteopetrosis phenotype in IKBKG (NEMO) mutation-positive women: A case-control study

BACKGROUND

NF-κB essential modulator (NEMO), encoded by IKBKG, is necessary for activation of the ubiquitous transcription factor nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB). Animal studies suggest NEMO is required for NF-κB mediated bone homeostasis, but this has not been thoroughly studied in humans. IKBKG loss-of-function mutation causes incontinentia pigmenti (IP), a rare X-linked disease featuring linear hypopigmentation, alopecia, hypodontia, and immunodeficiency. Single case reports describe osteopetrosis (OPT) in boys carrying hypomorphic IKBKG mutations.

METHOD

We studied the bone phenotype in women with IP with evaluation of radiographs of the spine and non-dominant arm and leg; lumbar spine and femoral neck aBMD using DXA; μ-CT and histomorphometry of trans-iliac crest biopsy specimens; bone turnover markers; and cellular phenotype in bone marrow skeletal (stromal) stem cells (BM-MSCs) in a cross-sectional, age-, sex-, and BMI-matched case-control study. X-chromosome inactivation was measured in blood leucocytes and BM-MSCs using a PCR method with methylation of HpaII sites. NF-κB activity was quantitated in BM-MSCs using a luciferase NF-κB reporter assay.

RESULTS

Seven Caucasian women with IP (age: 24-67 years and BMI: 20.0-35.2 kg/m²) and IKBKG mutation (del exon 4-10 (n = 4); c.460C>T (n = 3)) were compared to matched controls. The IKBKG mutation carriers had extremely skewed X-inactivation (>90:10%) in blood, but not in BM-MSCs. NF-κB activity was lower in BM-MSCs from IKBKG mutation carriers (n = 5) compared to controls (3094 ± 679 vs. 5422 ± 1038/μg protein, p < 0.01). However, no differences were identified on skeletal radiographics, aBMD, μ-architecture of the iliac crest, or bone turnover markers. The IKBKG mutation carriers had a 1.7-fold greater extent of eroded surfaces relative to osteoid surfaces (p < 0.01), and a 2.0-fold greater proportion of arrested reversal surface relative to active reversal surface (p < 0.01).

CONCLUSION

Unlike mutation-positive males, the IKBKG mutation-positive women did not manifest OPT.

Histomorphometry and cortical robusticity of the adult human femur

Recent quantitative analyses of human bone microanatomy, as well as theoretical models that propose bone microstructure and gross anatomical associations, have started to reveal insights into biological links that may facilitate remodeling processes. However, relationships between bone size and the underlying cortical bone histology remain largely unexplored. The goal of this study is to determine the extent to which static indicators of bone remodeling and vascularity, measured using histomorphometric techniques, relate to femoral midshaft cortical width and robusticity. Using previously published and new quantitative data from 450 adult human male (n = 233) and female (n = 217) femora, we determine if these aspects of femoral size relate to bone microanatomy. Scaling relationships are explored and interpreted within the context of tissue form and function. Analyses revealed that the area and diameter of Haversian canals and secondary osteons, and densities of secondary osteons and osteocyte lacunae from the sub-periosteal region of the posterior midshaft femur cortex were significantly, but not consistently, associated with femoral size. Cortical width and bone robusticity were correlated with osteocyte lacunae density and scaled with positive allometry. Diameter and area of osteons and Haversian canals decreased as the width of cortex and bone robusticity increased, revealing a negative allometric relationship. These results indicate that microscopic products of cortical bone remodeling and vascularity are linked to femur size. Allometric relationships between more robust human femora with thicker cortical bone and histological products of bone remodeling correspond with principles of bone functional adaptation. Future studies may benefit from exploring scaling relationships between bone histomorphometric data and measurements of bone macrostructure.

Femoral Neck External Size but not aBMD Predicts Structural and Mass Changes for Women Transitioning Through Menopause

The impact of adult bone traits on changes in bone structure and mass during aging is not well understood. Having shown that intracortical remodeling correlates with external size of adult long bones led us to hypothesize that age-related changes in bone traits also depend on external bone size. We analyzed hip dual-energy X-ray absorptiometry images acquired longitudinally over 14 years for 198 midlife women transitioning through menopause. The 14-year change in bone mineral content (BMC, R²  = 0.03, p = 0.015) and bone area (R²  = 0.13, p = 0.001), but not areal bone mineral density (aBMD, R²  = 0.00, p = 0.931) correlated negatively with baseline femoral neck external size, adjusted for body size using the residuals from a linear regression between baseline bone area and height. The dependence of the 14-year changes in BMC and bone area on baseline bone area remained significant after adjusting for race/ethnicity, postmenopausal hormone use, the 14-year change in weight, and baseline aBMD, weight, height, and age. Women were sorted into tertiles using the baseline bone area-height residuals. The 14-year change in BMC (p = 0.009) and bone area (p = 0.001) but not aBMD (p = 0.788) differed across the tertiles. This suggested that women showed similar changes in aBMD for different structural and biological reasons: women with narrow femoral necks showed smaller changes in BMC but greater increases in bone area compared to women with wide femoral necks who showed greater losses in BMC but without large compensatory increases in bone area. This finding is opposite to expectations that periosteal expansion acts to mechanically offset bone loss. Thus, changes in femoral neck structure and mass during menopause vary widely among women and are predicted by baseline external bone size but not aBMD. How these different structural and mass changes affect individual strength-decline trajectories remains to be determined. © 2017 American Society for Bone and Mineral Research.

Long bone robustness during growth: A cross-sectional pQCT examination of children and young adults aged 5-29years

Skeletal robustness (cross-section size relative to length) is associated with stress fractures in adults, and appears to explain the high incidence of distal radius fractures in adolescents. However, little is known about the ontogeny of long bone robustness during the first three decades of life. Therefore, we explored the ontogeny of tibial, fibular, ulnar and radial robustness in a cross-sectional sample of 5 to 29year-old volunteers of both sexes. Peripheral quantitative computed tomography (pQCT) was used to evaluate cross-sections of the leg (4%, 14%, 38% and 66%), and forearm (4%, and 66%) in N=432 individuals. Robustness was evaluated as the total bone area divided by bone length. Differences between age-groups, sexes, and age-group×sex interactions were evaluated with ANOVA with Tukey's post hocs where appropriate. Most bone sites exhibited more robust bones in men than women (P<0.001 to 0.02), and in older age-groups than younger (P<0.001). Sex×age-group interaction was observed at the 66% and 38% tibia sites with robustness increasing more with age in men than in women (P=0.006 to 0.042). Post-hoc analyses indicated no sex differences prior to 13years-of-age, and notable exceptions to increasing robustness with age at the 4% radial and 66% tibial sites, which exhibited reduced robustness in age groups close to peak height velocity. In conclusion, the present results suggest that very little sexual dimorphism in long bone robustness exists prior to puberty, and that divergence occurs primarily after cessation of longitudinal growth. A period of relative diaphyseal slenderness was identified at age-groups coinciding with the adolescent growth spurt, which may be related to the relatively high incidence of frank and stress fracture in adolescents.

Age and sex alone are insufficient to predict human rib structural response to dynamic A-P loading

Thoracic injuries from motor vehicle crashes (MVCs) are common in children and the elderly and are associated with a high rate of mortality for both groups. Rib fractures, in particular, are linked to high mortality rates which increase with the number of fractures sustained. Anthropomorphic test devices (ATDs) and computational models have been developed to improve vehicle safety, however these tools are constructed based on limited physical datasets. To-date, no study has explored variation of rib structural properties across the entire age spectrum with data obtained using the same experimental methodology to allow for comparison. One-hundred eighty-four ribs from 93 post mortem human subjects (PMHS) (70 male, 23 female; ages 4-99) were subjected to dynamic bending tests simulating a frontal impact to the thorax. Structural mechanical properties were calculated and a multi-level statistical model quantified the sample variance as explained by age and sex. Displacement (δ_X), peak force (F_peak), linear structural stiffness (K), energy absorption to fracture (U_tot), and plastic properties including post-yield energy absorption (U_Pl), plastic displacement (δ_Pl), and the ratio of elastic to secant stiffness (K-ratio) all showed negative relationships with age, while only F_peak, K, and U_tot were dependent on sex. Despite these relationships being statistically significant, only 7-39% of variance is explained by age and only 3-17% of variance is explained by sex. This demonstrates that variability in bone properties is more complex than simply chronological age- and sex-dependence and should be explored in the context of biological mechanisms instead.

Ancient Human Bone Microstructure in Medieval England: Comparisons between Two Socio-Economic Groups

Understanding the links between bone microstructure and human lifestyle is critical for clinical and anthropological research into skeletal growth and adaptation. The present study is the first to report correspondence between socio-economic status and variation in bone microstructure in ancient humans. Products of femoral cortical remodeling were assessed using histological methods in a large human medieval sample (N = 450) which represented two distinct socio-economic groups. Osteonal parameters were recorded in posterior midshaft femoral sections from adult males (N = 233) and females (N = 217). Using univariate and multivariate statistics, intact, fragmentary, and osteon population densities, Haversian canal area and diameter, and osteon area were compared between the two groups, accounting for sex, age, and estimated femoral robusticity. The size of osteons and their Haversian canals, as well as osteon density, varied significantly between the socio-economic groups, although minor inconsistencies were observed in females. Variation in microstructure was consistent with historical textual evidence that describes differences in mechanical loading and nutrition between the two groups. Results demonstrate that aspects of ancient human lifestyle can be inferred from bone microstructure.

Women Build Long Bones With Less Cortical Mass Relative to Body Size and Bone Size Compared With Men

BACKGROUND

The twofold greater lifetime risk of fracturing a bone for white women compared with white men and black women has been attributed in part to differences in how the skeletal system accumulates bone mass during growth. On average, women build more slender long bones with less cortical area compared with men. Although slender bones are known to have a naturally lower cortical area compared with wider bones, it remains unclear whether the relatively lower cortical area of women is consistent with their increased slenderness or is reduced beyond that expected for the sex-specific differences in bone size and body size. Whether this sexual dimorphism is consistent with ethnic background and is recapitulated in the widely used mouse model also remains unclear.

QUESTIONS/PURPOSES

We asked (1) do black women build bones with reduced cortical area compared with black men; (2) do white women build bones with reduced cortical area compared with white men; and (3) do female mice build bones with reduced cortical area compared with male mice?

METHODS

Bone strength and cross-sectional morphology of adult human and mouse bone were calculated from quantitative CT images of the femoral midshaft. The data were tested for normality and regression analyses were used to test for differences in cortical area between men and women after adjusting for body size and bone size by general linear model (GLM).

RESULTS

Linear regression analysis showed that the femurs of black women had 11% lower cortical area compared with those of black men after adjusting for body size and bone size (women: mean=357.7 mm2; 95% confidence interval [CI], 347.9-367.5 mm2; men: mean=400.1 mm2; 95% CI, 391.5-408.7 mm2; effect size=1.2; p<0.001, GLM). Likewise, the femurs of white women had 12% less cortical area compared with those of white men after adjusting for body size and bone size (women: mean=350.1 mm2; 95% CI, 340.4-359.8 mm2; men: mean=394.3 mm2; 95% CI, 386.5-402.1 mm2; effect size=1.3; p<0.001, GLM). In contrast, female and male femora from recombinant inbred mouse strains showed the opposite trend; femurs from female mice had a 4% larger cortical area compared with those of male mice after adjusting for body size and bone size (female: mean=0.73 mm2; 95% CI, 0.71-0.74 mm2; male: mean=0.70 mm2; 95% CI, 0.68-0.71 mm2; effect size=0.74; p=0.04, GLM).

CONCLUSIONS

Female femurs are not simply a more slender version of male femurs. Women acquire substantially less mass (cortical area) for their body size and bone size compared with men. Our analysis questions whether mouse long bone is a suitable model to study human sexual dimorphism.

CLINICAL RELEVANCE

Identifying differences in the way bones are constructed may be clinically important for developing sex-specific diagnostics and treatment strategies to reduce fragility fractures.

Sex classification using the three-dimensional tibia form or shape including population specificity approach

The aims of this study were to enable geometric morphometric sex classification using tibial proximal and distal sexual dimorphism and to evaluate the secular trend of tibial shape/form from the early 20th century to the present day. The study samples consisted of 61 adult tibias from an early 20th-century Czech population and 57 three-dimensional tibias from a 21st-century population. Discriminant function analysis with cross-validation was carried out to assess the accuracy of sex classification. Shape analysis revealed significant sex differences in both tibial extremities of the 21st-century sample and in the proximal tibia of the 20th-century population. Sex-based divergence varied between the analyzed samples, raising the issues of population specificity and diachronic change. Classification using tibial form was more successful than using tibial shape. The highest values of correct assignment (91.80% and 88.52%) were found using the form from the early 20th Czech population.

Biological regulation of bone quality

The ability of bone to resist fracture is determined by the combination of bone mass and bone quality. Like bone mass, bone quality is carefully regulated. Of the many aspects of bone quality, this review focuses on biological mechanisms that control the material quality of the bone extracellular matrix (ECM). Bone ECM quality depends upon ECM composition and organization. Proteins and signaling pathways that affect the mineral or organic constituents of bone ECM impact bone ECM material properties, such as elastic modulus and hardness. These properties are also sensitive to pathways that regulate bone remodeling by osteoblasts, osteoclasts, and osteocytes. Several extracellular proteins, signaling pathways, intracellular effectors, and transcription regulatory networks have been implicated in the control of bone ECM quality. A molecular understanding of these mechanisms will elucidate the biological control of bone quality and suggest new targets for the development of therapies to prevent bone fragility.

Intracortical remodeling parameters are associated with measures of bone robustness

Prior work identified a novel association between bone robustness and porosity, which may be part of a broader interaction whereby the skeletal system compensates for the natural variation in robustness (bone width relative to length) by modulating tissue-level mechanical properties to increase stiffness of slender bones and to reduce mass of robust bones. To further understand this association, we tested the hypothesis that the relationship between robustness and porosity is mediated through intracortical, BMU-based (basic multicellular unit) remodeling. We quantified cortical porosity, mineralization, and histomorphometry at two sites (38% and 66% of the length) in human cadaveric tibiae. We found significant correlations between robustness and several histomorphometric variables (e.g., % secondary tissue [R(2)  = 0.68, P < 0.004], total osteon area [R(2)  = 0.42, P < 0.04]) at the 66% site. Although these associations were weaker at the 38% site, significant correlations between histological variables were identified between the two sites indicating that both respond to the same global effects and demonstrate a similar character at the whole bone level. Thus, robust bones tended to have larger and more numerous osteons with less infilling, resulting in bigger pores and more secondary bone area. These results suggest that local regulation of BMU-based remodeling may be further modulated by a global signal associated with robustness, such that remodeling is suppressed in slender bones but not in robust bones. Elucidating this mechanism further is crucial for better understanding the complex adaptive nature of the skeleton, and how interindividual variation in remodeling differentially impacts skeletal aging and an individuals' potential response to prophylactic treatments.

Characterization of complex, co-adapted skeletal biomechanics phenotypes: a needed paradigm shift in the genetics of bone structure and function

The genetic architecture of skeletal biomechanical performance has tremendous potential to advance our knowledge of the biological mechanisms that drive variation in skeletal fragility and osteoporosis risk. Research using traditional approaches that focus on specific gene pathways is increasing our understanding of how and to what degree those pathways may affect population-level variation in fracture susceptibility, and shows that known pathways may affect bone fragility through unsuspected mechanisms. Non-traditional approaches that incorporate a new appreciation for the degree to which bone traits co-adapt to functional loading environments, using a wide variety of redundant compensatory mechanisms to meet both physiological and mechanical demands, represent a radical departure from the dominant reductionist paradigm and have the potential to rapidly advance our understanding of bone fragility and identification of new targets for therapeutic intervention.

Variation in tibial functionality and fracture susceptibility among healthy, young adults arises from the acquisition of biologically distinct sets of traits

Physiological systems like bone respond to many genetic and environmental factors by adjusting traits in a highly coordinated, compensatory manner to establish organ-level function. To be mechanically functional, a bone should be sufficiently stiff and strong to support physiological loads. Factors impairing this process are expected to compromise strength and increase fracture risk. We tested the hypotheses that individuals with reduced stiffness relative to body size will show an increased risk of fracturing and that reduced strength arises from the acquisition of biologically distinct sets of traits (ie, different combinations of morphological and tissue-level mechanical properties). We assessed tibial functionality retrospectively for 336 young adult women and men engaged in military training, and calculated robustness (total area/bone length), cortical area (Ct.Ar), and tissue-mineral density (TMD). These three traits explained 69% to 72% of the variation in tibial stiffness (p < 0.0001). Having reduced stiffness relative to body size (body weight × bone length) was associated with odds ratios of 1.5 (95% confidence interval [CI], 0.5-4.3) and 7.0 (95% CI, 2.0-25.1) for women and men, respectively, for developing a stress fracture based on radiography and scintigraphy. K-means cluster analysis was used to segregate men and women into subgroups based on robustness, Ct.Ar, and TMD adjusted for body size. Stiffness varied 37% to 42% among the clusters (p < 0.0001, ANOVA). For men, 78% of stress fracture cases segregated to three clusters (p < 0.03, chi-square). Clusters showing reduced function exhibited either slender tibias with the expected Ct.Ar and TMD relative to body size and robustness (ie, well-adapted bones) or robust tibias with reduced residuals for Ct.Ar or TMD relative to body size and robustness (ie, poorly adapted bones). Thus, we show there are multiple biomechanical and thus biological pathways leading to reduced function and increased fracture risk. Our results have important implications for developing personalized preventative diagnostics and treatments.

Smoking is a predictor of worse trabecular mechanical performance in hip fragility fracture patients

Clinical risk factors (CRFs) are established predictors of fracture events. However, the influence of individual CRFs on trabecular mechanical fragility is still a subject of debate. In this study, we aimed to assess differences, adjusted for CRFs, between bone macrostructural parameters measured in ex-vivo specimens from hip fragility fracture patients and osteoarthritis patients, and to determine whether individual CRFs could predict trabecular bone mechanical behavior in hip fragility fractures. Additionally, we also looked for associations between the 10-year risk of major and hip fracture calculated by FRAX and trabecular bone mechanical performance. In this case-control study, a group of fragility fracture patients were compared with a group of osteoarthritis patients, both having undergone hip replacement surgery. A clinical protocol was applied in order to collect CRFs [body mass index (BMI), prior fragility fracture, parental history of hip fracture, long-term use of oral glucocorticoids, rheumatoid arthritis, current smoking, alcohol consumption, age and gender]. The 10-year probability of fracture was calculated. Serum bone turnover markers were determined and dual X-ray absorptiometry performed. Femoral head diameter was evaluated and trabecular bone cylinders were drilled for mechanical testing to determine bone strength, stiffness and toughness. We evaluated 40 hip fragility fracture and 52 osteoarthritis patients. Trabecular bone stiffness was significantly lower (p = 0.042) in hip fragility fracture patients when compared to osteoarthritic individuals, adjusted for age, gender and BMI. No other macrostructural parameter was statistically different between the groups. In hip fragility fracture patients, smoking habits (β = -0.403; p = 0.018) and female gender (β = -0.416; p = 0.008) were independently associated with lower stiffness. In addition, smoking was also independently associated with worse trabecular strength (β = -0.323; p = 0.045), and toughness (β = -0.403; p = 0.018). In these patients, the 10-year risk of major (r = -0.550; p = 0.012) and hip fracture (r = -0.513; p = 0.021) calculated using only CRFs was strongly correlated with femoral neck bone mineral density but not with mechanical performance. Our data showed that among fragility fracture patients active smoking is a predictor of worse intrinsic trabecular mechanical performance, and female gender is also independently associated with lower stiffness. In this population, the 10-year risk of fracture using CRFs with different weights only reflects bone mass loss but not trabecular mechanical properties.

The amount of periosteal apposition required to maintain bone strength during aging depends on adult bone morphology and tissue-modulus degradation rate

Although the continued periosteal apposition that accompanies age-related bone loss is a biomechanically critical target for prophylactic treatment of bone fragility, the magnitude of periosteal expansion required to maintain strength during aging has not been established. A new model for predicting periosteal apposition rate for men and women was developed to better understand the complex, nonlinear interactions that exist among bone morphology, tissue-modulus, and aging. Periosteal apposition rate varied up to eightfold across bone sizes, and this depended on the relationship between cortical area and total area, which varies with external size and among anatomical sites. Increasing tissue-modulus degradation rate from 0% to -4%/decade resulted in 65% to 145% increases in periosteal apposition rate beyond that expected for bone loss alone. Periosteal apposition rate had to increase as much as 350% over time to maintain stiffness for slender diaphyses, whereas robust bones required less than a 32% increase over time. Small changes in the amount of bone accrued during growth (ie, adult cortical area) affected periosteal apposition rate of slender bones to a much greater extent compared to robust bones. This outcome suggested that impaired bone growth places a heavy burden on the biological activity required to maintain stiffness with aging. Finally, sex-specific differences in periosteal apposition were attributable in part to differences in bone size between the two populations. The results indicated that a substantial proportion of the variation in periosteal expansion required to maintain bone strength during aging can be attributed to the natural variation in adult bone width. Efforts to identify factors contributing to variation in periosteal expansion will benefit from developing a better understanding of how to adjust clinical data to differentiate the biological responses attributable to size-effects from other genetic and environmental factors.

Effects of age and sex on the strength and cortical thickness of the femoral neck

A group of 48 men (22 aged 65-75 years, 26 aged 80-90 years) and 59 women (32 aged 65-75 years, 27 aged 80-90 years) were enrolled in the Age, Gene/Environment Susceptibility-Reykjavik study and imaged with in vivo volumetric Quantitative Computed Tomography (QCT) to investigate the effects of age and sex on femoral neck structure and strength. Femoral neck cross-sectional moment of inertia for bending directions near those of standing and walking (I(AP)), bending strength (M(y)), and axial compressive strength (F(y)) were computed at the location of minimum cross-sectional area (minCSA). Local cortical thickness was computed in the inferior femoral neck based on density profiles extending through the cortex of the minCSA femoral neck section. Multivariate models accounting for height, weight, and age group (younger or older) showed that men had a 46% higher M(y) and a 23% higher F(y) than women, while women had a 13% thicker inferior cortex than men. Cortical thickness in the inferoposterior region of the femoral neck was significantly related to bending and axial strength after adjusting for overall volumetric bone mineral density. Both minCSA and I(AP) were higher in the older, gender-pooled age group, but F(y) and M(y) did not differ between the two age groups. The results suggest that age-related expansion of the femoral neck primarily occurs in the superior and inferior directions and helps maintain homeostasis of femoral neck stiffness and strength. The higher bending strength of the male femoral neck may partly explain why elderly men have a lower risk of hip fracture than elderly women.

The fatigue resistance of rabbit tibiae varies with age from youth to middle age

Young adults are at risk of stress fractures. Risk is higher in younger and female individuals. Stress fractures occur due to repeated loading of the bone (fatigue). We modeled this with rabbit tibiae. Age increased fatigue resistance which correlated with bone mineral density. A sex difference was not detected.

INTRODUCTION

Younger adults who engage in intense physical activity with a sudden increase in intensity level (military recruits/college athletes) are at risk of bone stress fractures. Risk is greater in females and diminishes with aging. Stress fractures may be the result of fatigue damage, which is not repaired rapidly enough to avoid fracture. It was hypothesized that the fatigue resistance of whole rabbit tibiae would be less in female specimens but greater as animal age increased.

METHODS

Rabbit tibiae were harvested from three age groups (4, 7, and ≥ 12 months (females only)). The tibiae were scanned with dual energy X-ray absorptiometry to determine bone mineral density (BMD), computed tomography to quantify geometry, and then fatigue tested in three-point bending.

RESULTS

In the ≥ 12-month group, BMD was approximately 20% higher, while the fatigue resistance was found to be approximately ten times higher than the other age groups. Sex was not a factor in the 4- and 7-month groups. Multiple linear regression revealed that fatigue life was negatively correlated with applied stress range and positively correlated with BMD (adjusted r (2) = 0.69).

CONCLUSIONS

A difference in fatigue behavior due to sex was not detected, but there was a large increase in fatigue resistance with age. This correlated with increased BMD and parallels a reduced risk of stress fracture due to age in military recruits. Skeletal "maturation" may play an important role in determining stress fracture risk. Increased risk in females may be due to mechanisms other than those that determine material behavior.

Aging and bone

Bones provide mechanical and protective function, while also serving as housing for marrow and a site for regulation of calcium ion homeostasis. The properties of bones do not remain constant with age; rather, they change throughout life, in some cases improving in function, but in others, function deteriorates. Here we review the modifications in the mechanical function and shape of bones, the bone cells, the matrix they produce, and the mineral that is deposited on this matrix, while presenting recent theories about the factors leading to these changes.

Sex-specific regulation of body size and bone slenderness by the acid labile subunit

Insulin-like growth factor 1 (IGF-1) is a crucial mediator of body size and bone mass during growth and development. In serum, IGF-1 is stabilized by several IGF-1-binding proteins (IGFBPs) and the acid labile subunit (ALS). Previous research using ALS knockout (ALSKO) mice indicated a growth retardation phenotype, and clinical reports of humans have indicated short stature and low bone mineral density (BMD) in patients with ALS deficiency. To determine the temporal and sex-specific effects of ALS deficiency on body size and skeletal development during growth, we characterized control and ALSKO mice from 4 to 16 weeks of age. We found that female ALSKO mice had an earlier-onset reduction in body size (4 weeks) but that both female and male ALSKO mice were consistently smaller than control mice. Interestingly, skeletal analyses at multiple ages showed increased slenderness of ALSKO femurs that was more severe in females than in males. Both male and female ALSKO mice appeared to compensate for their more slender bones through increased bone formation on their endosteal surfaces during growth, but ALSKO females had increased endosteal bone formation compared with ALSKO males. This study revealed age- and sex-specific dependencies of body size and bone size on the ALS. These findings may explain the heterogeneity in growth and BMD measurements reported in human ALS-deficient patients.

Female reproductive system and bone

The female reproductive system plays a major role in regulating the acquisition and loss of bone by the skeleton from menarche through senescence. Onset of gonadal sex steroid secretion at puberty is the major factor responsible for skeletal longitudinal and radial growth, as well as significant gain in bone density, until peak bone density is achieved in third decade of life. Gonadal sex steroids then help maintain peak bone density until menopause, including during the transient changes in skeletal mineral content associated with pregnancy and lactation. At menopause, decreased gonadal sex steroid production normally leads to rapid bone loss. The most rapid bone loss associated with decreased estrogen levels occurs in the first 8-10 years after menopause, with slower age-related bone loss occurring during later life. Age-related bone loss in women after the early menopausal phase of bone loss is caused by ongoing gonadal sex steroid deficiency, vitamin D deficiency, and secondary hyperparathyroidism. Other factors also contribute to age-related bone loss, including intrinsic defects in osteoblast function, impairment of the GH/IGF axis, reduced peak bone mass, age-associated sarcopenia, and various sporadic secondary causes. Further understanding of the relative contributions of the female reproductive system and each of the other factors to development and maintenance of the female skeleton, bone loss, and fracture risk will lead to improved approaches for prevention and treatment of osteoporosis.

Interindividual variation in functionally adapted trait sets is established during postnatal growth and predictable based on bone robustness

Adults acquire unique sets of morphological and tissue-quality bone traits that are predictable based on robustness and deterministic of strength and fragility. How and when individual trait sets arise during growth has not been established. Longitudinal structural changes of the metacarpal diaphysis were measured for boys and girls from 3 mo to 8 yr of age using hand radiographs obtained from the Bolton-Brush collection. Robustness varied approximately 2-fold among boys and girls, and individual values were established by 2 yr of age, indicating that genetic and environmental factors controlling the relationship between growth in width and growth in length were established early during postnatal growth. Significant negative correlations between robustness and relative cortical area and a significant positive correlation between robustness and a novel measure capturing the efficiency of growth indicated that coordination of the subperiosteal and endocortical surfaces was responsible for this population acquiring a narrow range of trait sets that was predictable based on robustness. Boys and girls with robust diaphyses had proportionally thinner cortices to minimize mass, whereas children with slender diaphyses had proportionally thicker cortices to maximize stiffness. Girls had more slender metacarpals with proportionally thicker cortices compared with boys at all prepubertal ages. Although postnatal growth patterns varied in fundamentally different ways with sex and robustness, the dependence of trait sets on robustness indicated that children sustained variants affecting subperiosteal growth because they shared a common biological factor regulating functional adaptation. Considering the natural variation in acquired trait sets may help identify determinants of fracture risk, because age-related bone loss and gain will affect slender and robust structures differently.

Phenotypic integration among trabecular and cortical bone traits establishes mechanical functionality of inbred mouse vertebrae

Conventional approaches to identifying quantitative trait loci (QTLs) regulating bone mass and fragility are limited because they examine cortical and trabecular traits independently. Prior work examining long bones from young adult mice and humans indicated that skeletal traits are functionally related and that compensatory interactions among morphological and compositional traits are critical for establishing mechanical function. However, it is not known whether trait covariation (i.e., phenotypic integration) also is important for establishing mechanical function in more complex, corticocancellous structures. Covariation among trabecular, cortical, and compositional bone traits was examined in the context of mechanical functionality for L(4) vertebral bodies across a panel of 16-wk-old female AXB/BXA recombinant inbred (RI) mouse strains. The unique pattern of randomization of the A/J and C57BL/6J (B6) genome among the RI panel provides a powerful tool that can be used to measure the tendency for different traits to covary and to study the biology of complex traits. We tested the hypothesis that genetic variants affecting vertebral size and mass are buffered by changes in the relative amounts of cortical and trabecular bone and overall mineralization. Despite inheriting random sets of A/J and B6 genomes, the RI strains inherited nonrandom sets of cortical and trabecular bone traits. Path analysis, which is a multivariate analysis that shows how multiple traits covary simultaneously when confounding variables like body size are taken into consideration, showed that RI strains that tended to have smaller vertebrae relative to body size achieved mechanical functionality by increasing mineralization and the relative amounts of cortical and trabecular bone. The interdependence among corticocancellous traits in the vertebral body indicated that variation in trabecular bone traits among inbred mouse strains, which is often thought to arise from genetic factors, is also determined in part by the adaptive response to variation in traits describing the cortical shell. The covariation among corticocancellous traits has important implications for genetic analyses and for interpreting the response of bone to genetic and environmental perturbations.

A delay in pubertal onset affects the covariation of body weight, estradiol, and bone size

The skeletal system functions as a locomotive organ and a mineral reservoir and combinations of genetic and environmental factors affect the skeletal system. Although delayed puberty is associated with compromised bone mass, suppression of estrogen should be beneficial to cortical strength. The purpose was to employ path analysis to study bone strength and delayed puberty. Forty-five female rats were randomly assigned to a control group (n = 15) and an experimental group (n = 30) that received injections of gonadotropin releasing hormone antagonist (GnRH-a). Causal models were constructed by specifying directed paths between bone traits. The first model tested the hypothesis that the functional relationships between bone traits and body weight were altered by a delay in pubertal onset. GnRH-a injections during puberty altered the covariation between body weight and bone size. The second model was constructed to test the hypothesis that variability in stiffness was causally related to variability in body weight. The model also tested the relationship between the periosteal and endocortical surfaces and their relationship to stiffness. There was no change in the relationship between the surfaces in the GnRH-a group. The third model determined the effect of estradiol on both total area and relative cortical area in both groups. The relationship between periosteal surface and serum estradiol levels was only significant during estrogen suppression. These data suggest that increases in body weight during or prior to puberty may not be protective of bone strength.

Stress fracture and military medical readiness: bridging basic and applied research

PURPOSE

Military recruits and distance runners share a special risk of stress fracture injury. Recent efforts by US and Israeli military-sponsored researchers have uncovered important mechanisms and practical low-cost interventions. This article summarizes key findings relevant to prevention of stress fracture, including simple strategies to identify and to mitigate risk.

METHODS

Published research supported through the Bone Health and Military Medical Readiness research program and related military bone research was analyzed for contributions to preventing stress fracture in military recruits and optimizing bone health.

RESULTS

Thousands of military recruits helped test hypotheses about predictors of risk, safer exercise regimens, and rest, nutrition, gait training, and technology interventions to reduce stress fracture risk. Concurrent cellular, animal, and human laboratory studies were used to systematically investigate mechanisms of mechanical forces acting on bone and interactions through muscle, hormonal and genetic influences, and metabolism. The iterative and sometimes simultaneous process of basic discovery and field testing produced new knowledge that will provide safer science-based physical training.

DISCUSSION

Human training studies evaluating effects on bone require special commitment from investigators and funders due to volunteer compliance and attrition challenges. The findings from multiple studies indicate that measures of bone elasticity, fragility, and geometry are as important as bone mineral density in predicting fracture risk, with applications for new measurement technologies. Risk may be reduced by high intakes of calcium, vitamin D, and possibly protein (e.g., milk products). Prostaglandin E2, insulin-like growth factor 1, and estrogens are important mediators of osteogenesis, indicating reasons to limit the use of certain drugs (e.g., ibuprofen), to avoid excessive food restriction, and to treat hypogonadism. Abnormal gait may be a correctable risk factor. Brief daily vibration may stimulate bone mineral accretion similar to weight-bearing exercise. Genetic factors contribute importantly to bone quality, affecting fracture susceptibility and providing new insights into fracture healing and tissue reengineering.

Ribosomal protein L29/HIP deficiency delays osteogenesis and increases fragility of adult bone in mice

Mice lacking HIP/RPL29, a ribosomal modulator of protein synthesis rate, display a short stature phenotype. To understand the contribution of HIP/RPL29 to bone formation and adult whole bone mechanical properties, we examined both developing and adult bone in our knockout mice. Results indicated that bone shortening in HIP/RPL29-null mice is due to delayed entry of chondro-osteoprogenitors into the cell cycle. Structural properties of adult null bones were analyzed by micro-computed tomography. Interestingly, partial preservation of cortical thickness was observed in null males indicating a gender-specific effect of the genotype on cortical bone parameters. Null males, and to a lower extent null females, displayed increased bone material toughness to counteract decreased bone size. This elevation in a bone material property was associated with increased bone mineral density only in null males. Neither male nor female null animals could withstand the same maximum load as gender-matched controls in three-point bending tests, and smaller post-yield displacements (and thus increased bone brittleness) were found for null animals. These results suggest that HIP/RPL29-deficient mice exhibit increased bone fragility due to altered matrix protein synthesis rates as a consequence of ribosomal insufficiency. Thus, sub-efficient protein translation increased fracture risk in HIP/RPL29-null animals. Taken together, these studies provide strong genetic evidence that the ability to regulate and amplify protein synthesis rates, including those proteins that regulate the cell cycle entry during skeletal development, are important determinants for establishment of normal bone mass and quality.

Fourier transform infrared imaging microspectroscopy and tissue-level mechanical testing reveal intraspecies variation in mouse bone mineral and matrix composition

Fracture susceptibility is heritable and dependent upon bone morphology and quality. However, studies of bone quality are typically overshadowed by emphasis on bone geometry and bone mineral density. Given that differences in mineral and matrix composition exist in a variety of species, we hypothesized that genetic variation in bone quality and tissue-level mechanical properties would also exist within species. Sixteen-week-old female A/J, C57BL/6J (B6), and C3H/HeJ (C3H) inbred mouse femora were analyzed using Fourier transform infrared imaging and tissue-level mechanical testing for variation in mineral composition, mineral maturity, collagen cross-link ratio, and tissue-level mechanical properties. A/J femora had an increased mineral-to-matrix ratio compared to B6. The C3H mineral-to-matrix ratio was intermediate of A/J and B6. C3H femora had reduced acid phosphate and carbonate levels and an increased collagen cross-link ratio compared to A/J and B6. Modulus values paralleled mineral-to-matrix values, with A/J femora being the most stiff, B6 being the least stiff, and C3H having intermediate stiffness. In addition, work-to-failure varied among the strains, with the highly mineralized and brittle A/J femora performing the least amount of work-to-failure. Inbred mice are therefore able to differentially modulate the composition of their bone mineral and the maturity of their bone matrix in conjunction with tissue-level mechanical properties. These results suggest that specific combinations of bone quality and morphological traits are genetically regulated such that mechanically functional bones can be constructed in different ways.

Evidence for major pleiotropic effects on bone size variation from a principal component analysis of 451 Caucasian families

AIM

To identify pleiotropic quantitative trait loci (QTL) influencing bone size (BS) at different skeletal sites in Caucasians.

METHODS

In a sample containing 3899 Caucasians from 451 pedigrees, 410 microsatellite markers spaced approximately 8.9 cM apart across the human genome were genotyped. Phenotypical and genetic correlations of BS at lumbar spine, hip (femoral neck, trochanter, and intertrochanter regions), and wrist (ultradistal, mid-distal, and one-third distal sites) were determined using bivariate quantitative genetic analysis. A principal component analysis (PCA) was performed to obtain principal component (PC) factors that were then subjected to variance components linkage analysis to identify regions linked to the PC.

RESULTS

Genetic correlations of BS at different skeletal sites ranged from 0.40 to 0.79 (P<0.001). The PCA yielded a PC named PCtotal, which explained up to 76% of the total (co)variation of all the BS at the 7 skeletal sites for the whole sample. We identified a QTL influencing the BS of multiple skeletal sites on chromosome 7 at 140 cM [logarithm of odds (LOD)=2.85] in the overall sample. Sex-specific evidence for linkage was observed on chromosome 11 at 53 cM (LOD =2.82) in the male-only data subset.

CONCLUSION

Our study identified several genomic regions that may have pleiotropic effects on different skeletal sites. These regions may contain genes that play a critical role in overall bone development and osteoporosis at multiple skeletal sites, hence are biologically and clinically important.

Percolation theory relates corticocancellous architecture to mechanical function in vertebrae of inbred mouse strains

Complex corticocancellous skeletal sites such as the vertebra or proximal femur are connected networks of bone capable of transferring mechanical loads. Characterizing these structures as networks may allow us to quantify the load transferring behavior of the emergent system as a function of the connected cortical and trabecular components. By defining the relationship between certain physical bone traits and mechanical load transfer pathways, a clearer picture of the genetic determinants of skeletal fragility can be developed. We tested the hypothesis that the measures provided by network percolation theory will reveal that different combinations of cortical, trabecular, and compositional traits lead to significantly different load transfer pathways within the vertebral bodies among inbred mouse strains. Gross morphologic, micro-architectural, and compositional traits of L5 vertebrae from 15 week old A/J (A), C57BL6/J (B6), and C3H/HeJ (C3H) inbred mice (n=10/strain) were determined using micro-computed tomography. Measures included total cross-sectional area, bone volume fraction, trabecular number, thickness, spacing, cortical area, and tissue mineral density. Two-dimensional coronal sections were converted to network graphs with the cortical shell considered as one highly connected node. Percolation parameters including correlation length (average number of connected nodes between superior and inferior surfaces), chemical length (minimum number of connected nodes between surfaces), and backbone mass (strut number) were measured. Analysis of the topology of the connected bone networks showed that A and B6 mice transfer load through trabecular pathways in the middle of the vertebral body in addition to the cortical shell. C3H mice transfer load primarily through the highly mineralized cortical shell. Thus, the measures provided by percolation theory provide a quantitative approach to study how different combinations of cortical and trabecular traits lead to mechanically functional structures. The data further emphasize the interdependent nature of these physical bone traits suggesting similar genetic variants may affect both trabecular and cortical bone. Therefore, developing a network approach to study corticocancellous architecture during growth should further our understanding of the biological basis of skeletal fragility and, thus, provide novel engineering approaches to studying the genetic basis of fracture risk.

Biological co-adaptation of morphological and composition traits contributes to mechanical functionality and skeletal fragility

A path analysis was conducted to determine whether functional interactions exist among morphological, compositional, and microstructural traits for young adult human tibias. Data provided evidence that bone traits are co-adapted during ontogeny so that the sets of traits together satisfy physiological loading demands. However, certain sets of traits are expected to perform poorly under extreme load conditions.

INTRODUCTION

Previous data from inbred mouse strains suggested that biological processes within bone co-adapt morphological and compositional traits during ontogeny to satisfy physiological loading demands. Similar work in young adult humans showed that cortical tissue from slender tibias was stiffer, less ductile, and more susceptible to accumulating damage. Here we tested whether the relationships among morphology and tissue level mechanical properties were the result of biological processes that co-adapt physical traits, similar to those observed for the mouse skeleton.

MATERIALS AND METHODS

Cross-sectional morphology, bone slenderness (Tt.Ar/Le), and tissue level mechanical properties were measured from tibias from 14 female (22-46 yr old) and 17 male (17-46 yr old) donors. Physical bone traits measured included tissue density, ash content, water content, porosity, and the area fractions of osteonal, interstitial, and circumferential lamellar tissues. Bivariate relationships among traits were determined using linear regression analysis. A path analysis was conducted to test the hypothesis that Tt.Ar/Le is functionally related to mineralization (ash content) and the proportion of total area occupied by cortical bone.

RESULTS

Ash content correlated negatively with several traits including Tt.Ar/Le and marrow area, indicating that slender bones were constructed of tissue with higher mineralization. Path analysis revealed that slender tibias were compensated by higher mineralization and a greater area fraction of bone.

CONCLUSIONS

The results suggest that bone adapts by varying the relative amount of cortical bone within the diaphysis and by varying matrix composition. This co-adaptation is expected to lead to a particular set of traits that is sufficiently stiff and strong to support daily loads. However, increases in mineralization result in a more brittle and damageable material that would be expected to perform poorly under extreme load conditions. Therefore, focusing attention on sets of traits and the relationship among traits may advance our understanding of how genetic and environmental factors influence bone fragility.

Genetic randomization reveals functional relationships among morphologic and tissue-quality traits that contribute to bone strength and fragility

We examined femora from adult AXB/BXA recombinant inbred (RI) mouse strains to identify skeletal traits that are functionally related and to determine how functional interactions among these traits contribute to genetic variability in whole-bone stiffness, strength, and toughness. Randomization of A/J and C57BL/6J genomic regions resulted in each adult male and female RI strain building mechanically functional femora by assembling unique sets of morphologic and tissue-quality traits. A correlation analysis was conducted using the mean trait values for each RI strain. A third of the 66 correlations examined were significant, indicating that many bone traits covaried or were functionally related. Path analysis revealed important functional interactions among bone slenderness, cortical thickness, and tissue mineral density. The path coefficients describing these functional relations were similar for both sexes. The causal relationship among these three traits suggested that cellular processes during growth simultaneously regulate bone slenderness, cortical thickness, and tissue mineral density so that the combination of traits is sufficiently stiff and strong to satisfy daily loading demands. A disadvantage of these functional interactions was that increases in tissue mineral density also deleteriously affected tissue ductility. Consequently, slender bones with high mineral density may be stiff and strong but they are also brittle. Thus, genetically randomized mouse strains revealed a basic biological paradigm that allows for flexibility in building bones that are functional for daily activities but that creates preferred sets of traits under extreme loading conditions. Genetic or environmental perturbations that alter these functional interactions during growth would be expected to lead to loss of function and suboptimal adult bone quality.