Photopolymerisation and characterization of maleylatedcellulose-g-poly(acrylic acid) superabsorbent polymer

Preparation of superabsorbent composite(s) based on dialdehyde cellulose extracted from banana fiber waste

The study focus is the valorization of banana agriculture by products by the extraction and derivatization of cellulose and its incorporation in formulations to produce superabsorbent materials endowed with high water absorption performances. The extracted cellulose (BP) was subjected to a controlled oxidation by sodium periodate to convert it to cellulose dialdehyde (DAC) with controlled aldehyde content. The cellulosic materials were incorporated into a suspension containing acrylic acid (AA) and itaconic acid (IA) to produce composite hybrid hydrogels (SA-BP/SA-DAC) by radical chain polymerization in water, using N,N-methylene-bis-acrylamide (MBA) as a cross-linking agent and potassium persulfate (KPS) as an initiator. The prepared materials were characterized using techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and rheological analysis. Additionally, the absorption and re-swelling capacities of the superabsorbent composites (SAPs) were assessed through kinetic studies in water and NaCl solution. Notably, dialdehyde cellulose (DAC), due to its low crystallinity index, hydrophilicity (attributed to aldehyde and hemiacetal functions), and high polarity, holds promise for enhancing the swelling and water retention capacity of the hydrogel. A water absorption capacity as high as 1240±60 g.g-1 was obtained for SA-DAC with a DAC content of 5 %wt. Additionally, the reusability of the SAPs was evidenced.

Porous cationic cellulose beads prepared by homogeneous in-situ quaternization and acid induced regeneration for water/moisture absorption

Chemical modification is a reliable and efficient strategy for designing cellulose-based functional materials. Herein, porous quaternized cellulose beads (QCBs) as cationic superabsorbent were fabricated by homogeneous in-situ chemical grafting cellulose molecular chains with glycidyl trimethylammonium chloride (GTAC) in tetraethylammonium hydroxide (TEAOH)/urea aqueous solution followed by acetic acid induced regeneration. The influence of GTAC dosage on the physicochemical-structural properties of cationic QCBs was deeply investigated. Results revealed that cotton liner could well-dissolved in TEAOH/urea aqueous solution, leading to a homogeneous and efficient quaternization medium for cellulose, thereby giving the high DS and positive charge density for quaternized cellulose. NMR results demonstrated the main substitution of GTAC groups at 2-OH and 6-OH positions of the cellulose chains during quaternization reaction. With increasing GTAC dosage, the network skeleton of QCBs gradually transformed from thick fibrils to thin aggregates, as well as enhanced pore volumes and hydrophilicity. Accordingly, QCBs-1.5 with high pore volume (99.70 cm3/g) exhibited excellent absorption capacity and efficiency, absorbing 122.32 g of water and 0.45 g of moisture per gram of the beads in 20 min. This work not only offers a simple strategy for the homogeneous quaternization modification of cellulose, but also provides a porous cellulose-based cationic superabsorbent material.

Recent Advances in Superabsorbent Hydrogels Derived from Agro Waste Materials for Sustainable Agriculture: A Review

Superabsorbent hydrogels made from agro waste materials have the potential to promote sustainable agriculture and environmental sustainability. These hydrogels not only help reduce water consumption and increase crop yields but also contribute to minimizing waste and lowering greenhouse gas emissions. Recent research on superabsorbent hydrogels derived from agro wastes has focused on the preparation of hydrogels based on natural polymers isolated from agro wastes, such as cellulose, hemicellulose, and lignin. This review provides an in-depth examination of hydrogels developed from raw agro waste materials and natural polymers extracted from agro wastes, highlighting that these studies start with raw wastes as the main materials. The utilization strategies for specific types of agro wastes are comprehensively described. This review outlines different methods utilized in the production of these hydrogels, including physical cross-linking techniques such as dissolution-regeneration and freeze-thawing, as well as chemical cross-linking methods involving various cross-linking agents and graft polymerization techniques such as free radical polymerization, microwave-assisted polymerization, and γ radiation graft polymerization. Specifically, this review explores the applications of agro waste-based superabsorbent hydrogels in enhancing soil properties such as water retention and slow-release of fertilizers for sustainable agriculture.

Rational Design of a Multifunctional Hydrogel Trap for Water and Fertilizer Capture: A Review

Water scarcity and land infertility pose significant challenges to agricultural development, particularly in arid and semiarid regions. Improving soil-water-retention capacity and fertilizer utilization efficiency through the application of soil additives has become a pivotal approach in agricultural practices. Hydrogels exhibit exceptional water absorption and fertilizer retention capabilities, making them extensively utilized in the fields of agriculture, forestry, and desert control. Currently, most reviews primarily focus on the raw materials, classification, synthesis methods, and application prospects of hydrogels, with limited attention given to strategies for enhancing water-retention performance, mechanisms underlying fertilizer absorption, and environmental risks. This review covers the commonly used cross-linking methods in hydrogel synthesis and the structure-activity relationship between hydrogels and water as well as fertilizer. Additionally, a thorough analysis of the ecological benefits and risks associated with hydrogels is presented. Finally, future prospects and challenges are delineated from the perspectives of material design and engineering applications.

Effect of chain structures of monomer on hydroxyethyl cellulose-based superabsorbent properties and improvement of chickpeas plant growth of water deficit-stressed

The aim of this research was evaluation of the influence of distance between zwitterionic monomer ions on the performance of superabsorbents. For this purpose, two zwitterionic monomers 4-(3-aminopropyl) amino-4-oxo-2-butenoic acid (APOB) and 4-(6-aminohexyl) amino-4-oxo-2-butenoic acid (AHOB) were prepared and applied for synthesis of two new superabsorbents through graft copolymerization onto hydroxyethyl cellulose (HEC) in the presence of acrylic acid (AA). In synthesis of superabsorbents factors such as the highest water absorbency capacity, absorbency rate, gel strength, and environmental problems should be resolved or improved. The results demonstrated that the water absorbency capacity and rate parameters (τ) of HEC-g-p(AA-co-APOB) and HEC-g-p(AA-co-AHOB) in distilled water were 986.62, 664.38 g/g, and 98.04, 140.84 min, respectively. The biodegradability of HEC-g-p(AA-co-APOB) was approximately 4 times more than HEC-g-p(AA-co-AHOB). However, based on the rheological analyses (G'/G″) HEC-g-p(AA-co-AHOB) was stronger than the other. Additionally, studies of water retention on soil containing HEC-g-p(AA-co-AHOB) superabsorbent (soil with 0.25 wt% material) showed that the after 30 days has ≤5 % water while soil in the absence of superabsorbent after 10 days completely dried. Studies of the growth of plants in soil demonstrated in the presence of HEC-g-p(AA-co-AHOB) the average length of shoots was 36 cm while without superabsorbent were 25 cm.

Combining and concentrating nanocelluloses for cryogels with remarkable strength and wet resilience

Cellulose cryogels are promising eco-friendly materials that exhibit low density, high porosity, and renewability. However, the applications of these materials are limited by their lower mechanical and water resistance compared to petrochemical-based lightweight materials. In this work, nanocelluloses were functionalized with cationic and anionic groups, and these nanomaterials were combined to obtain strong and water-resilient cryogels. To prepare the cryogels, anionic and cationic micro- and nanofibrils (CNFs) were produced at three different sizes and combined in various weight ratios, forming electrostatic complexes. The complex phase was concentrated by centrifugation and freeze-dried. Porous and open cellular structures were assembled in all compositions tested (porosity >90 %). Compressive testing revealed that the most resistant cryogels (1.7 MPa) were obtained with equivalent amounts of negatively and positively charged CNFs with lengths between 100 and 1200 nm. The strength at this condition was achieved as CNF electrostatic complexes assembled in thick cells, as observed by synchrotron X-ray tomography. In addition to mechanical strength, electrostatic complexation provided remarkable structural stability in water for the CNF cryogels, without compromising their biodegradability. This route by electrostatic complexation is a practical strategy to combine and concentrate nanocelluloses to tailor biodegradable lightweight materials with high strength and wet stability.

Preparation of modified humic acid/TiO2/P(AA-co-AM) nanocomposite hydrogels with enhanced dye adsorption and photocatalysis

A novel composite hydrogel with exceptional adsorption and photocatalytic properties was synthesized using modified coal-based humic acid (HA-C), modified titanium dioxide (TiO2) nanoparticles, acrylic acid (AA), and acrylamide (AM) as precursors. The modification of HA-C and TiO2 significantly enhances the structural support provided by the hydrogel for photocatalytic components. Moreover, we investigated the effects of monomer ratio, dye concentration, temperature, and pH on the material properties. Additionally, we tested the mechanical strength, swelling behavior, and reusability of the hydrogels. The composite hydrogel's adsorption performance and synergistic adsorption-photocatalytic performance were evaluated based on its removal rate for both absorbed and degraded methylene blue (MB). Remarkably, incorporating HA-C greatly improved the adsorption efficiency of the composite hydrogel for methylene blue to a maximum capacity of 1490 mg g-1. Furthermore, TiO2 nanoparticles in the structure promoted MB degradation with an efficiency exceeding 96.5%. The hydrogel exhibited excellent recoverability and reusability through nine cycles of adsorption/desorption as well as six cycles of degradation.

The water-retaining functional slow-release fertilizer modified by carboxymethyl chitosan

To solve the problem of shortage of agricultural water resources and low utilization rate of fertilizer, a slow-release fertilizer based on chitosan modified water retention function was developed. Solution polymerization and semi-interpenetrating network technology were used to load urea aldehyde into carboxymethyl chitosan superabsorbent resin network. This technology realizes the simultaneous slow release of nutrients and water by using modified chitosan, which has important implications for the application of chitosan in agriculture to regulate the soil water and fertilizer conditions. The optimal preparation conditions were: MBA 0.07 %, KPS 0.8 %, AM to AA mass ratio of 0.3:1, CMC content of 10 %, AA neutralization degree 85 %, UF 20 %, AA+AM mass sum of 10 g, reaction temperature 70 °C and reaction time 2 h. The maximum water absorption rate of the optimized NC reached 172.3 g/g. The cumulative release of nitrogen in 30 days was 83.67 %. The application of NC in sandy soil promoted seed germination and growth. The comprehensive results indicate that NC has broad application prospects in arid areas based on its excellent water retention and nutrient release performance.

Advancements in Cellulose-Based Superabsorbent Hydrogels: Sustainable Solutions across Industries

The development of superabsorbent hydrogels is experiencing a transformative era across industries. While traditional synthetic hydrogels have found broad utility, their non-biodegradable nature has raised environmental concerns, driving the search for eco-friendlier alternatives. Cellulose-based superabsorbents, derived from sustainable sources, are gaining prominence. Innovations include biodegradable polymer hydrogels, natural cellulose-chitosan variants, and cassava starch-based alternatives. These materials are reshaping agriculture by enhancing soil fertility and water retention, serving as potent hemostatic agents in medicine, contributing to pollution control, and providing eco-friendly construction materials. Cellulose-based hydrogels also offer promise in drug delivery and hygiene products. Advanced characterization techniques aid in optimizing their properties, while the shift towards circular economy practices further highlights sustainability. This manuscript provides a comprehensive overview of these advancements, highlighting their diverse applications and environmental benefits.

Porous superabsorbent composites prepared from aqueous foam template and application evaluation

Rapid water absorption is very important for the application of superabsorbent polymers under dry or semi-dry conditions, but there are currently few relevant studies. In this context, a novel porous superabsorbent of chitosan-grafted acrylic copolymer-2-acrylamido-2-methylpropanesulfonic acid/sapindus mukorossi pericarp/calcined oil shale semi-coke (CS-g-P(AA-co-AMPS)/SMP/COSSC) was prepared by a green and convenient foam template method, which was triggered by redox polymerization. The rich pore structure of the porous superabsorbent was conducive to accelerating the water absorption rate. It only took 15 min to reach a swelling capacity of 650 g g-1 in distilled water. Soil experiments show that even with the addition of 0.5 wt% porous superabsorbent, the soil water retention time can be extended to 7 days. Finally, it was applied to the growth of cabbage seeds and it was found that the growth was significantly improved. Based on these excellent properties, we expect to provide a valuable reference for the preparation of fast-absorbing materials through the green water-based foam template method, contributing to sustainable agriculture.

Research Advances in Superabsorbent Polymers

Superabsorbent polymers are new functional polymeric materials that can absorb and retain liquids thousands of times their masses. This paper reviews the synthesis and modification methods of different superabsorbent polymers, summarizes the processing methods for different forms of superabsorbent polymers, and organizes the applications and research progress of superabsorbent polymers in industrial, agricultural, and biomedical industries. Synthetic polymers like polyacrylic acid, polyacrylamide, polyacrylonitrile, and polyvinyl alcohol exhibit superior water absorption properties compared to natural polymers such as cellulose, chitosan, and starch, but they also do not degrade easily. Consequently, it is often necessary to modify synthetic polymers or graft superabsorbent functional groups onto natural polymers, and then crosslink them to balance the properties of material. Compared to the widely used superabsorbent nanoparticles, research on superabsorbent fibers and gels is on the rise, and they are particularly notable in biomedical fields like drug delivery, wound dressing, and tissue engineering.

Characterization of a low-methoxyl pectin extracted from red radish (Raphanus sativus L.) pomace and its gelation induced by NaCl

There is an increasing demand for obtaining pectin from new sources. Red radish (Raphanus sativus L.) pomace pectin extracted by alkali was low-methoxyl pectin with esterification degree of 10.17 %, galacturonic acid content of 69.71 % (wt), and average molar weight of 78.59 kDa. The pectin primarily consisted of rhamnogalacturonan I and homogalacturonan domains. The predominant monosaccharides of the pectin were galacturonic acid (46.32 mol%), arabinose (16.03 mol%), galactose (10.46 mol%), and rhamnose (10.28 mol%), respectively. The red radish pomace pectin solution exhibited a shear-thinning behavior. NaCl could induce gelation of red radish pomace pectin, and the gel properties of red radish pomace pectin were considerably affected by the NaCl concentration. As the NaCl concentration (0.25-0.50 mol/L) increased, the rate of gelation accelerated, and the time to gelation point appeared earlier. There was an optimal NaCl concentration (0.50 mol/L) for the pectin to form a gel with the greatest solid-like properties, gel hardness (33.84 g) and water-holding capacity (62.41 %). Gelation force analysis indicated gel formation mainly caused by electrostatic shielding effect of Na+ and hydrogen bonding. This research could facilitate the applications of the red radish pomace pectin in the realm of edible hydrocolloids.

Cellulose-Based Metallogels-Part 2: Physico-Chemical Properties and Biological Stability

Metallogels represent a class of composite materials in which a metal can be a part of the gel network as a coordinated ion, act as a cross-linker, or be incorporated as metal nanoparticles in the gel matrix. Cellulose is a natural polymer that has a set of beneficial ecological, economic, and other properties that make it sustainable: wide availability, renewability of raw materials, low-cost, biocompatibility, and biodegradability. That is why metallogels based on cellulose hydrogels and additionally enriched with new properties delivered by metals offer exciting opportunities for advanced biomaterials. Cellulosic metallogels can be either transparent or opaque, which is determined by the nature of the raw materials for the hydrogel and the metal content in the metallogel. They also exhibit a variety of colors depending on the type of metal or its compounds. Due to the introduction of metals, the mechanical strength, thermal stability, and swelling ability of cellulosic materials are improved; however, in certain conditions, metal nanoparticles can deteriorate these characteristics. The embedding of metal into the hydrogel generally does not alter the supramolecular structure of the cellulose matrix, but the crystallinity index changes after decoration with metal particles. Metallogels containing silver (0), gold (0), and Zn(II) reveal antimicrobial and antiviral properties; in some cases, promotion of cell activity and proliferation are reported. The pore system of cellulose-based metallogels allows for a prolonged biocidal effect. Thus, the incorporation of metals into cellulose-based gels introduces unique properties and functionalities of this material.

Network interpenetrating slow-release nitrogen fertilizer based on carrageenan and urea: A new low-cost water and fertilizer regulation carrier

Modern agriculture presents new requirements of low cost, high water retention and degradability for superabsorbent and slow-release fertilizers. In this study, carrageenan (CG), acrylic acid (AA), N, N '-methylene diacrylamide (MBA), urea and ammonium persulfate (APS) were used as raw materials. A kind of high water absorption, water retention, nitrogen slow release and biodegradable carrageenan superabsorbent (CG-SA) was prepared by grafting copolymerization. The optimal CG-SA was obtained with a water absorption rate of 680.45 g/g by orthogonal L18(3)7 experiments and single-factor experiments. The water absorption behavior of CG-SA in deionized water and salt solution were studied. The CG-SA was characterized before and after degradation by FTIR, SEM. The nitrogen release behavior and kinetic characteristics of CG-SA were investigated. In addition, CG-SA degraded 58.33 % and 64.35 % in soil at 25 °C and 35 °C after 28 days. All the results indicated that the low-cost and degradable CG-SA can achieve simultaneous slow release of water and nutrients, which is expected to be widely used as a new water-fertilizer integration technology in arid and poor areas.

Maleic acid as an important monomer in synthesis of stimuli-responsive poly(acrylic acid-co-acrylamide-co-maleic acid) superabsorbent polymer

Poly(acrylic acid-co-acrylamide-co-maleic acid) (p(AA-co-AM-co-MA)) superabsorbent polymer was synthesized from acrylic acid (AA), acrylamide (AM), and maleic acid (MA) via free radical copolymerization. Results showed the presence of maleic acid in structure of superabsorbent has the key and superior role in creating a smart superabsorbent. The structure, morphology, and strength of the superabsorbent were characterized using FT-IR, TGA, SEM, and rheology analysis. The effect of different factors was investigated to determine the ability of water absorbency of the superabsorbent. According to optimized conditions, the water absorbency capacity of the superabsorbent in distilled water (DW) was 1348 g/g and in a solution containing 1.0 wt.% NaCl (SCS) was 106 g/g. The water retention ability of the superabsorbent was also investigated. The kinetic swelling of superabsorbent was identified by Fickian diffusion and Schott's pseudo-second-order model. Furthermore, the reusability of superabsorbent was studied in distilled water and saline solution. The ability of superabsorbent was investigated in simulated urea and glucose solutions, and very good results were obtained. The response ability of the superabsorbent was confirmed by swelling and shrinking behavior against changes of temperature, pH, and ionic strength.

Performance Evaluation of Gum Gellan-Based Hydrogel as a Novel Adsorbent for the Removal of Cationic Dyes: Linear Regression Models

In this work, the suitability and efficacy of the previously reported biodegradable gellan gum (GG)-based hydrogel have been thoroughly investigated with respect to the adsorption mechanisms of malachite green (MG) and methylene blue (MB) dyes. The dyes' removal from aqueous solutions using GG-cl-poly(AA) as an adsorbent material has been studied in a discontinuous system with respect to contact time, dose, pH, and temperature. The synthesized hydrogel was characterized by FT-IR, TGA, XRD, ¹H NMR, and FE-SEM. The adsorption capacity of GG-cl-poly(AA) hydrogel was investigated at different pH solutions (3, 7, and 10), and it was found that neutralized charge plays a crucial role in the enhancement of dye removal. To better understand the behavior of the GG-cl-poly(AA) hydrogel in adsorbing model dyes, adsorption kinetics, isotherms, and thermodynamics were also investigated. The values of qmax for MG and MB were obtained to be 552.48 and 531.9 mg g^-1. In addition, the influence of NaCl concentration on adsorption efficiency was investigated, and it was found that as the ion concentration increased, the effectiveness of the adsorption process dropped. Moreover, the synthesized hydrogel's potential application in the adsorption and separation of dyes from wastewater is enhanced by the reusability investigations conducted in convenient conditions. As a result, it is possible to conclude that reusing GG-cl-poly(AA) hydrogel as a low-cost, easy-to-handle, nontoxic material in an industrial wastewater treatment plant's adsorption process can provide a number of advantages, including high efficiency for MG and MB removal and cost savings on overall treatment plant operations.

Cellulose/nanocellulose superabsorbent hydrogels as a sustainable platform for materials applications: A mini-review and perspective

Superabsorbent hydrogels (SAH) are crosslinked three-dimensional networks distinguished by their super capacity to stabilize a large quantity of water without dissolving. Such behavior enables them to engage in various applications. Cellulose and its derived nanocellulose can become SAHs as an appealing, versatile, and sustainable platform because of abundance, biodegradability, and renewability compared to petroleum-based materials. In this review, a synthetic strategy that reflects starting cellulosic resources to their associated synthons, crosslinking types, and synthetic controlling factors was highlighted. Representative examples of cellulose and nanocellulose SAH and an in-depth discussion of structure-absorption relationships were listed. Finally, various applications of cellulose and nanocellulose SAH, challenges and existing problems, and proposed future research pathways were listed.

Effect of Nanocellulose Types on Microporous Acrylic Acid/Sodium Alginate Super Absorbent Polymers

The aim of this study was to investigate the effect of different types of nanocellulose, i.e., cellulose nanocrystal (CNC), cellulose nanofiber (CNF) and bacterial nanocellulose (BNC), and also different drying methods (oven-drying and freeze-drying) on the properties of acrylic acid (AA)/sodium alginate (SA) super absorbent polymers (SAPs). In addition, the presence of ammonium per sulfate as an initiator and N-N methylene-bis-acrylamide as a cross-linker were considered. Synthesized SAPs were characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The absorption and rheological properties (i.e., storage modulus and loss modulus) were also investigated. The results of FTIR spectroscopy demonstrated several types of interactions, such as hydrogen and esterification, between SA, AA and nanocellulose. SEM analysis revealed a microporous structure in the SAPs. All SAPs had a centrifuge retention capacity (CRC)/free swelling capacity (FSC) ≥ 69%. The absorption behavior showed that the oven-dried SAPs had superior (about 2×) CRC and FRC in different aqueous media compared to the freeze-dried counterparts. The freeze-dried SAPs showed increased rheological properties in comparison to the oven-dried ones, with SAPs containing BNC and CNC having the highest rheological properties, respectively. Overall, it can be concluded that oven-dried SAPs containing CNC had better absorption properties than the other ones tested in this study.

Environmentally friendly hydrogel: A review of classification, preparation and application in agriculture

Superabsorbent hydrogel (SH) is three-dimensional (3D) cross-linked hydrophilic polymer that can absorb and retain large quantities of water or other aqueous solutions. SH is made of water-affinity monomers and is widely used in biomedicine, wastewater treatment, hygiene and slow-release fertilizers (SRFs). This article focused on the preparation methods of SH, superabsorbent hydrogel composite and the application of SH in agriculture. By selecting various synthetic technologies and cross-linking agents, a series of chemical cross-linking or physical networks can be designed and tailored to meet specific applications. In view of the excellent characteristics of water absorption, biodegradability, water retention and slow-release capacity, SH occupies a dominant position in the SRFs market. In this work, the agricultural application of SH in double coated SRFs and nutrients carriers is also discussed. Some mechanisms related to the nutrient release were analyzed by mathematical models. In addition, some agronomic benefits of using superabsorbent hydrogels in improving water absorption, water holding capacity and increasing crop yields were also discussed. Although SH has certain shortcomings, from the perspective of long-term development, it will further show great potential in sustainable agriculture.

Bagasse Cellulose Composite Superabsorbent Material with Double-Crosslinking Network Using Chemical Modified Nano-CaCO3 Reinforcing Strategy

To improve the salt resistance of superabsorbent materials and the gel strength of superabsorbent materials after water absorption, a bagasse cellulose-based network structure composite superabsorbent (CAAMC) was prepared via graft copolymerization of acrylamide/acrylic acid (AM/AA) onto bagasse cellulose using silane coupling agent modified nano-CaCO₃ (MNC) and N,N′-methylene bisacrylamide (MBA) as a double crosslinker. The acrylamide/acrylic acid was chemically crosslinked with modified nano-CaCO₃ by C-N, and a stable double crosslinked (DC) network CAAMC was formed under the joint crosslinking of N,N′-methylene bisacrylamide and modified nano-CaCO₃. Modified nano-CaCO₃ plays a dual role of crosslinking agent and the filler, and the gel strength of composite superabsorbent is two times higher than that of N,N′-methylene bisacrylamide single crosslinking. The maximum absorbency of CAAMC reached 712 g/g for deionized water and 72 g/g for 0.9 wt% NaCl solution. The adsorption process of CAAMC was simulated by materials studio, and the maximum adsorption energy of amino and carboxyl groups for water molecules is −2.413 kJ/mol and −2.240 kJ/mol, respectively. According to the results of CAAMC soil water retention, a small amount of CAAMC can greatly improve the soil water retention effect.

Free Radical Copolymerization of Diallylamine and Itaconic Acid for the Synthesis of Chitosan Base Superabsorbent

Copolymerization of diallylamine (DAA) and itaconic acid (IA) was synthesized using benzoyl peroxide as a free radical initiator, in dioxane as the solvent. The composition of the copolymer was determined by the nitrogen content using Edx. The solubility of the copolymer was also investigated. The water solubility of the synthesized copolymer depends on the comonomers’ ratio. The structure of the copolymer was confirmed by ¹³C-NMR spectroscopy. To increase the water insolubility of the copolymers, and keep their hydrophilicity, the copolymer was allowed to react with chitosan to form a superabsorbent polymeric material (SP). The structure of the synthesized superabsorbent was confirmed using ¹³C-NMR spectroscopy. The thermal property of the (SP) was also investigated by TGA. The investigation of the chitosan-based superabsorbent, as water-retaining agents, was studied. The results revealed that the superabsorbent polymers exhibited a good swelling ability and salt tolerance.

Synthesis of Superabsorbent Polymer Hydrogels with Rapid Swelling: Effect of Reaction Medium Dosage and Polyvinylpyrrolidone on Water Absorption Rate

A superabsorbent polymer (SAP) was synthesized by solution polymerization. The influence of synthesis technology was studied and optimized, and FTIR, SEM, and TGA were used to characterize the structure and morphology of the material. Under the optimal synthesis conditions, the water absorption of the material can achieve about 80% of the saturation value in the first 20 min, and the material absorbs distilled water up to 2013 g/g. The SAP also has remarkable water retention and reswelling capability. The excellent performance makes it have a promising application in agriculture. In addition, the results show that the dosage of the reaction medium is a major factor for performance. Under the condition of the optimum value of other factors, the influence of the dosage of the reaction medium on water absorption can reach about 1000 g in distilled water.

A simple strategy for signal enhancement in lateral flow assays using superabsorbent polymers

To enhance the sensitivity of lateral flow assays (LFAs), a simple strategy is proposed using a nitrocellulose membrane modified with a superabsorbent polymer (SAP). SAP was incorporated into a nitrocellulose membrane for the flow control of detection probes. When absorbing aqueous solutions, SAP promoted the formation of biomolecule complexes to achieve up to a tenfold sensitivity improvement for the detection of human IgG. The assay time was optimized experimentally and numerically to within 20 min using this strategy. Moreover, fluid saturation in LFAs modified with SAP was mathematically simulated to better understand the underlying process, and molecular dynamics simulations were carried out to determine the effect of SAP. The proposed design was also applied to samples spiked with human immunoglobulin-depleted serum to test its applicability. The strategy presented is unique in that it preserves the characteristics of conventional LFAs, as it minimizes user intervention and is simple to manufacture at scale.

Biodegradable phase change materials with high latent heat: Preparation and application on Lentinus edodes storage

In order to develop biodegradable phase change materials (PCMs) with high latent heat for cold chain logistics, superabsorbent resin (SAR) was prepared based on starch graft copolymerization. FTIR and DSC demonstrated that acrylic acid was successfully grafted onto starches and optimum latent heat of PCM was 330.4 J/g with 10% (w/w) starch. The water retention of PCM with 10% (w/w) starch was 0.49 after heating at 50 °C for 200 h, which was 4.9 folds higher than that of non-starch PCM. Biodegradation rate of PCM was 60.12% within 75-day burial, which was 6 folds higher than that of non-starch PCM. Moreover, significant reduction in browning index, odor, decay, relative conductivity and malondialdehyde (MDA) content was observed in Lentinus edodes treated by biodegradable PCM. These results indicated that the application of biodegradable PCM could extend the shelf life of fresh L. edodes stored at 25 °C.

Synthesis of a novel superabsorbent with slow-release urea fertilizer using modified cellulose as a grafting agent and flexible copolymer

In this work, a number of glucose unites in polymeric structure of cellulose was converted to 2,4-dihydroxy-3-(1-hydroxy-2-oxoethoxy)butanal (cellulose containing di aldehyde units (CCDAUs)) by oxidation with sodium periodate, followed by condensation with acetone to produce 5,7-dihydroxy-6-((1-hydroxy-4-oxopent-2-en-1-yl)oxy)hept-3-en-2-one unites (cellulose containing di ene units (CCDEUs)). This modified cellulose was characterized by different methods and applied as a copolymer and grafting agent to synthesize an eco-friendly (CCDEUs-g-poly(AA)/urea) superabsorbent with slow-release urea fertilizer. The created double bonds in C₂ and C₃ positions of β-d-glucose units increased the linkage between cellulose and acrylic acid, leading to the formation of a strong network for slow-release urea fertilizer. Also, this modification created an expanded network for storage a high amount of water by increasing the cellulose flexibility. The reaction conditions for modification and synthesis of the superabsorbent, the oxidation degree value of glucose units, kinetics models, the effect of different saline solutions, various pH and reswelling time on the water absorbency, water retention capacity, reusability, biodegradability, and slow-release property were investigated. Also, the effect of synthesized CCDEUs-g-poly(AA)/urea on plant growth was tested and excellent results were obtained.

Starch-Based Super Water Absorbent: A Promising and Sustainable Way to Increase Survival Rate of Trees Planted in Arid Areas

This research aimed to scale up the production of starch-based super water absorbent (SWA) and to validate the practical benefits of SWA for agricultural applications. SWA was successfully prepared in an up-scaling production by radiation-induced graft polymerization of acrylic acid onto cassava starch. Chemical characterization by FTIR and thermal characterization by TGA showed results that differentiated starting materials from the prepared SWA, thus confirming effective preparation of starch-based SWA via radiation-induced graft polymerization. SEM results visibly revealed a highly porous morphology of the synthesized SWA, substantiating its high swelling ability. Results from the field tests, performed for two seasons, revealed that the prepared SWA was able to increase the survival rate of young rubber trees planted in arid area by up to 40%, while simultaneously enhancing the growth characteristics of the young rubber trees.

Kaolin-Enhanced Superabsorbent Composites: Synthesis, Characterization and Swelling Behaviors

One type of low-cost and eco-friendly organic‒inorganic superabsorbent composite (SAPC) was synthesized by free radical polymerization of acrylic acid (AA), starch (ST), sodium alginate (SA) and kaolin (KL) in aqueous solution. The structure and morphology of the SAPC were characterized by Fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The influence of different reaction conditions on water absorption of SAPC, i.e., SA and KL contents, AA neutralization degree (ND), potassium persulfate (KPS) and N, N′-methylenebisacrylamide (MBA) loading were systematically studied. Under the optimal synthesis conditions, very high water absorption of 1200 g/g was achieved. The swelling kinetic mechanism of SAPC was studied by pseudo-second order swelling kinetics model and Ritger‒Peppas model. The performances of SAPC under different environments were tested and results revealed that this new SAPC had excellent swelling capacity, high water retention, good salt tolerance in monovalent salt solution (NaCl solution) and good pH tolerance between 4 and 10.

Poly(acrylic acid) as an adhesion promoter for UV-assisted thermoplastic bonding: Application for the in vitro construction of human blood vessels

In this study, we introduced a novel adhesion bonding method for fabricating thermoplastic microdevices using poly(acrylic acid) (PAA) as a UV-assisted adhesion promoter. The bonding mechanism was based on the covalent cross-links between poly(methyl methacrylate) (PMMA) and PAA via the free radicals in their carbon backbone generated under UV irradiation. The water contact angle and Fourier-transformed infrared (FTIR) analysis were performed to analyze the surface characteristics of the PAA-coated PMMA. PMMAs were bonded under UV treatment for 60 s with the highest bond strength of around 1.18 MPa. The PMMA microdevice was leak-proof for over 200 h. Besides, clog-free PMMA microdevices with various-sizes microchannels were performed to demonstrate such a high applicable bonding method for microdevice fabrication. Moreover, PMMAs were bonded with other thermoplastics with a bond strength of around 0.5 MPa. Notably, collagen was easily coated inside the PMMA microchannels via electrostatic interaction between PAA and collagen which is beneficial for on-device cell culture. As a result, a layered co-culture model of smooth muscle cells (SMCs) and human umbilical vein endothelial cells (HUVECs) was realized inside simple straight microchannels mimicking human blood vessel wall. Therefore, the introduced bonding method could pave the way for fabricating microdevice for cell-related applications.

Synthesis of photodegradable cassava starch-based double network hydrogel with high mechanical stability for effective removal of methylene blue

Synthetic hydrogel has been widely used in several applications, but poor mechanical stability and biodegradability limit their applications and raise environmental concerns. Here, a biodegradable hydrogel was developed via simple free-radical polymerization of poly(acrylic acid) (PAA) in the presence of cassava starch (CS) and poly(vinyl alcohol). The hydrogel showed exceptional mechanical and physical properties. The structural morphology changed at higher CS content from a dense fiber-like porous network to larger pores with thicker cell walls. Due to the formation of a double network structure via physical entanglement, the compressive modulus significantly increased from 27 kPa (CS 0 wt%) to 127 kPa (CS 50 wt%). Reducing synthetic content (PAA) to 25 wt% and increasing CS content to 50 wt% did not reduce the removal efficiency of the hydrogel toward methylene blue (MB). The maximum adsorption capacity of the CS50 hydrogel was 417.0 mg/g. Data fitting to theoretical models indicated monolayer adsorption of MB on a homogeneous surface via chemisorption. Removal efficiency was higher than 70% at the 5^th cycle of adsorption-desorption. The biodegradability and photodegradability of the hydrogel were improved by grafting with CS. The developed hydrogel represents an alternative biodegradable adsorbent for a sustainable system of wastewater treatment.

Hydration and swelling: a theoretical investigation on the cooperativity effect of H-bonding interactions between p-hydroxy hydroxymethyl calix[4]/[5]arene and H2O by many-body interaction and density functional reactivity theory

In order to explore the nature of the hydration and swelling of superabsorbent resin, a theoretical investigation into the cooperativity effect of the H-bonding interactions in the hydrates of four model compounds that can be regarded as the units of hydroquinone formaldehyde resin (HFR) (i.e., O-hydroxymethyl-1,4-dihydroxybenzene, methylene di-O-hydroxymethyl-1,4-dihydroxybenzene, p-hydroxy hydroxymethyl calix[4]arene and p-hydroxy hydroxymethyl calix[5]arene) was carried out by many-body interaction and density functional reactivity theory. The HFR···H₂O···H₂O complexes, in which the H₂O···H₂O moieties are bound with both the hydroxyl groups of HFR, are the most stable. For the HFR(H₂O)_n clusters, the interaction energy per building block is increased as the number of the size n increases, indicating the cooperativity effect. Therefore, a deduction is given that the cooperativity effects of the H-bonding interactions play an important role in the process of the hydration and swelling of HFR, and the swelling behavior is mainly attributed to the cooperativity effects which arised from the interactions between the H₂O molecules. The origin of the cooperativity effect was examined employing several information-theoretic quantities in the density functional reactivity theory. The degree of swelling of HFR was quantitated using a measure of volume. Graphical abstract.

UV polymerization and property analysis of maleacylated methyl cellulose acrylic acid absorbent resin

In this paper, maleic anhydride (MA) was grafted onto methyl cellulose (MC) and then reacted with acrylic acid to synthesize a high gel strength and fast water absorption resin (AA-co-MC-g-MA) by UV polymerization. The reaction conditions of maleylated methylcellulose (MC-g-MA) were investigated, including the ratio of MC to MA, reaction time and catalyst amount. In addition, the reaction conditions for the synthesis of super absorbent resin were as follows: the amount of MC-g-MA, the degree of substitution of MC-g-MA, polymerization time, and the amount of initiator. Under optimal conditions, the maximum water absorption volume of synthetic resin was 2116 g/g, and the maximum salt absorption rate was 139 g/g. The water absorption resin prepared this time had high water absorption, water retention, excellent pH sensitivity, etc. It was hoped that it will have a good application prospect in the field of industrial production and agriculture in the future.