Ionic liquid transported into metal–organic frameworks

Efficient Selective Carbon Dioxide Separation via Task-Specific Ionic Liquids Incorporated in ZIF-8

Owing to the rapid increase in anthropogenic emission of carbon dioxide (CO2) in the atmosphere, which has resulted in a number of global climate challenges, a decrease in CO2 emissions is urgently needed in the current scenario. This study focuses on the development and characterization of composites for carbon dioxide (CO2) separation. The composites consist of two task-specific ionic liquids (TSILs), namely, tetramethylgunidinium imidazole [TMGHIM] and tetramethylgunidinium phenol [TMGHPhO], impregnated in ZIF-8. The performance of CO2 separation, including sorption capacity and selectivity, was evaluated for pristine ZIF-8 and composites of TMGHIM@ZIF-8 and TMGHPhO@ZIF-8. To demonstrate the thermal stability of the material, thermogravimetric analysis (TGA) was performed. Additionally, powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) were utilized to showcase the crystal structures and morphology. Fourier transform infrared spectroscopy (FTIR) and BET were also utilized to confirm the successful incorporation of TSILs into ZIF-8. The composite synthesized with TMGHIM@ZIF-8 demonstrated superior CO2 sorption performance as compared with TMGHPhO@ZIF-8. This is attributed to its strong attraction toward CO2, resulting in a higher CO2/CH4 selectivity of 110 while pristine MOFs showed 12 that is 9 times higher than that of the pristine ZIF-8. These TSILs@ZIF-8 composites have significant potential in designing sorbent materials for efficient acid gas separation applications.

Unveiling the mechanisms behind high CO2 adsorption by the selection of suitable ionic liquids incorporated into a ZIF-8 metal organic framework: A computational approach

There is growing focus on the crucial task of effectively capturing carbon dioxide (CO2) from the atmosphere to mitigate environmental consequences. Metal-organic frameworks (MOFs) have been used to replace many conventional materials in gas separation, and the incorporation of ionic liquids (ILs) into porous MOFs has shown promise as a new technique for improving CO2 capture and separation. However, the driving force underlying the electronic modulation of MOF nanostructures and the mechanisms behind their high CO2 adsorption remain unclear. This study reports the effect of encapsulating different imidazolium ILs in porous ZIF-8, to clarify the adsorption mechanism of CO2 using density functional theory (DFT)-based approaches. For this purpose, a range of anions, including bis(trifluoromethylsulfonyl)imide [NTf2], methanesulfonate [MeSO3], and acetate [AC], were combined with the 1-ethyl-3-methylimidazolium [EMIM]+ cation. [EMIM]+-based ILs@ZIF-8 composites were computationally investigated to identify suitable materials for CO2 capture. First, the intermolecular and intramolecular interactions between [EMIM]+ and different anions were examined in detail, and their effects on CO2 adsorption were explored. Subsequently, the integration of these ILs into the ZIF-8 solid structure was studied to reveal how their interactions influenced the CO2 adsorption behavior. Our results demonstrate that the incorporation of ILs strongly affects the adsorption capability of CO2, which is highly dependent on the nature of the ILs inside the ZIF-8 framework. DFT simulations further confirmed that the incorporation of ILs into ZIF-8 led to superior CO2 capture compared to isolated ILs and pristine ZIF-8. This improvement was attributed to the mutual interactions between the ILs and ZIF-8, which effectively fine-tuned CO2 adsorption within the composite structure. This understanding may act as a general guide for gaining more insight into the interfacial interactions between ILs and ZIFs structures and how these molecular-level interactions can help predict the selection of ILs for CO2 adsorption and separation, thereby addressing environmental challenges with greater precision and effectiveness.

Four Lanthanide(III) Metal-Organic Frameworks Fabricated by Bithiophene Dicarboxylate for High Inherent Proton Conduction

Currently, it is still a challenge to directly achieve highly stable metal-organic frameworks (MOFs) with superior proton conductivity solely through the exquisite design of ligands and the attentive selection of metal nodes. Inspired by this, we are intrigued by a multifunctional dicarboxylate ligand including dithiophene groups, 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), and lanthanide ions with distinct coordination topologies. Successfully, four isostructural three-dimensional lanthanide(III)-based MOFs, [Ln2(DTD)3(DEF)4]·DEF·6H2O [LnIII = TbIII (Tb-MOF), EuIII (Eu-MOF), SmIII (Sm-MOF), and DyIII (Dy-MOF)], were solvothermally prepared, in which the effective proton transport will be provided by the coordinated or free solvent molecules, the crystalline water molecules, and the framework components, as well as a large number of highly electronegative S and O atoms. As expected, the four Ln-MOFs demonstrated the highest proton conductivities (σ) being 0.54 × 10-3, 3.75 × 10-3, 1.28 × 10-3, and 1.92 × 10-3 S·cm-1 for the four MOFs, respectively, at 100 °C/98% relative humidity (RH). Excitingly, Dy-MOF demonstrated an extraordinary ultrahigh σ of 1 × 10-3 S·cm-1 at 30 °C/98% RH. Additionally, the plausible proton transport mechanisms were emphasized.

Incorporation of Amino Acid-Functionalized Ionic Liquids into Highly Porous MOF-177 to Improve the Post-Combustion CO2 Capture Capacity

This study presents the encapsulation of two amino acid-based ionic liquids (AAILs), 1-ethyl-3-methylimidazolium glycine [Emim][Gly] and 1-ethyl-3-methylimidazolium alanine [Emim][Ala], in a highly porous metal-organic framework (MOF-177) to generate state-of-the-art composites for post-combustion CO2 capture. Thermogravimetric analysis (TGA) demonstrated a successful encapsulation of the AAILs, with a dramatic reduction in the composites' surface areas and pore volumes. Both [Emim][Gly]@MOF-177 and [Emim][Ala]@MOF-177 had close to three times the CO2 uptake of MOF-177 at 20 wt.% loading, 0.2 bar, and 303 K. Additionally, 20-[Emim][Gly]@MOF-177 and 20-[Emim] [Ala]@MOF-177 enhanced their CO2/N2 selectivity from 5 (pristine MOF-177) to 13 and 11, respectively.

Confinement-enhanced Li+ ion dynamics in an ionic liquid-based electrolyte in porous material

While Ionic Liquids (IL) are promising liquid electrolyte components for Li-ion batteries due to their high electrochemical stability and low volatility and flammability, unfavorable Lithium-anion clusters lead to poor Li+ transport properties such as low transference numbers. A confinement of ILs in nanoporous materials could overcome these problems, based on altered structural and dynamic properties of the confined ILs. We investigate the coordination and the Li+ dynamics in an IL/Li-salt mixture of 1-butyl-1-methylpyrrolidinium bis(trifluormethyl-sulfonyl)imide (Pyr14TFSA) and LiTFSA and reveal in how far the confinement has positive or negative effects on ion clustering in the electrolyte. To this end, the electrolyte is confined in mesoporous silica SBA-15 (pore diameter 8 nm or 4 nm) or the metal-organic framework (MOF) ZIF-8 (pore diameter 1.16 nm). Raman spectra elucidate the Li-anion coordination and the interaction of the ions with the walls. Temperature-dependent 7Li spin relaxation rates, analyzed within the model of Bloembergen, Purcell and Pound (BPP), allow statements on the local Li+ environment, the local Li+ dynamics and its activation. In the SBA-15 materials the Li+ coordination is unchanged with persisting Li-TFSA clusters. Furthermore, the local dynamics of Li+ is reduced upon confinement, as expected due to geometrical restrictions. At the same time, however, both structural and dynamic parameters do not show a pronounced dependence on the pore size. Surprisingly, upon confinement in ZIF-8 Li+ displays faster local dynamics and a more asymmetric environment in comparison to the bulk electrolyte. The enhanced dynamics is accompanied by a reduced coordination to TFSA-, suggesting the breakup of Li-TFSA clusters. Differences between the porous materials are attributed to the nature of the wall surface, as Raman spectra suggest that in SBA-15 the TFSA- ion is preferentially interacting with the pore walls, whereas in ZIF-8 the Pyr14+ ion is immobilized by the pore walls. These results demonstrate a strong influence of internal interfaces on IL structure and dynamics and bear potential for further tailoring ion dynamics.

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Integrating Molecular Simulations with Machine Learning Guides in the Design and Synthesis of [BMIM][BF4]/MOF Composites for CO2/N2 Separation

Considering the existence of a large number and variety of metal-organic frameworks (MOFs) and ionic liquids (ILs), assessing the gas separation potential of all possible IL/MOF composites by purely experimental methods is not practical. In this work, we combined molecular simulations and machine learning (ML) algorithms to computationally design an IL/MOF composite. Molecular simulations were first performed to screen approximately 1000 different composites of 1-n-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) with a large variety of MOFs for CO₂ and N₂ adsorption. The results of simulations were used to develop ML models that can accurately predict the adsorption and separation performances of [BMIM][BF₄]/MOF composites. The most important features that affect the CO₂/N₂ selectivity of composites were extracted from ML and utilized to computationally generate an IL/MOF composite, [BMIM][BF₄]/UiO-66, which was not present in the original material data set. This composite was finally synthesized, characterized, and tested for CO₂/N₂ separation. Experimentally measured CO₂/N₂ selectivity of the [BMIM][BF₄]/UiO-66 composite matched well with the selectivity predicted by the ML model, and it was found to be comparable, if not higher than that of all previously synthesized [BMIM][BF₄]/MOF composites reported in the literature. Our proposed approach of combining molecular simulations with ML models will be highly useful to accurately predict the CO₂/N₂ separation performances of any [BMIM][BF₄]/MOF composite within seconds compared to the extensive time and effort requirements of purely experimental methods.

MOFs Containing Solid-State Electrolytes for Batteries

The use of metal-organic frameworks (MOFs) in solid-state electrolytes (SSEs) has been a very attractive research area that has received widespread attention in the modern world. SSEs can be divided into different types, some of which can be combined with MOFs to improve the electrochemical performance of the batteries by taking advantage of the high surface area and high porosity of MOFs. However, it also faces many serious problems and challenges. In this review, different types of SSEs are classified and the changes in these electrolytes after the addition of MOFs are described. Afterward, these SSEs with MOFs attached are introduced for different types of battery applications and the effects of these SSEs combined with MOFs on the electrochemical performance of the cells are described. Finally, some challenges faced by MOFs materials in batteries applications are presented, then some solutions to the problems and development expectations of MOFs are given.

Ionic-Liquid-Assisted One-Step Construction of Mesoporous Metal-Organic Frameworks

The synthesis of ionic-mesoporous-metal-organic frameworks (ionic-meso-MOFs) has received considerable interest in the fields of macromolecular adsorption, acid-base catalysis, ionic conductivity, etc.; yet, their synthesis still presents significant difficulties. In this study, functionalized mesoporous MIL-101-ILs (Cr) was facilely constructed via an in situ self-assembly method by using aromatic-anion-functionalized ionic liquids (ILs) as competitive ligands. It has been demonstrated that the inclusion of an aromatic moiety into an IL improves the coordination ability and is advantageous for the anchoring of ILs on Cr³⁺ via amino-metal coordination. Thus, ionic-meso-MOFs with a specific surface area of 441.9-624.9 cm²/g and an average pore diameter of 5.5 to 8.4 nm were successfully synthesized. Because of the presence of open Lewis acidic metal sites on the MOFs and basic active sites on the ILs, the resulting ionic-meso-MOFs demonstrated both an acid-base cooperative effect and a mesoporous structure, indicating a high potential for acid-base catalysis. This in situ synthesis procedure for ionic mesoporous MOFs offers a simple method for developing and fabricating multifunctional mesoporous materials.

Preparation and Hydrophilicity/Lipophilicity of Solubility-Switchable Ionic Liquids

Various solubility-switchable ionic liquids were prepared. Their syntheses were readily achieved in a few steps from glyceraldehyde dimethylacetal or its derivatives. Pyridinium, imidazolium, and phosphonium derivatives also exhibited solubility-switchable properties; acetal-type ionic liquids were soluble in organic solvents, while diol-type ones exhibited a preference for being dissolved in the aqueous phase. The solubility of the ionic liquids prepared in this study also depended on the number of carbon atoms in the cationic parts of the ionic liquids. Interconversion between the diol-type and the acetal-type ionic liquids was readily achieved under the standard conditions for diol acetalization and acetal hydrolysis. One of the prepared ionic liquids was also examined as a solvent for an organic reaction.

Solid Phase Extraction of (+)-Catechin from Cocoa Shell Waste Using Dual Ionic Liquid@ZIF8 Covered Silica

(+)-catechin is one category of flavonoids in cocoa shell waste and it has been reported to have many health benefits. In order to isolate it from aqueous extracted solution of cocoa shell waste by solid phase extraction (SPE), a series of dual ionic liquids@ZIF8-covered silica were prepared as the sorbents. Regarding the operation conditions of SPE and the characteristic structure of (+)-catechin, ZIF8-covered silica was synthesized to establish a stable and porous substrate, and various dual ionic liquids with multiple properties were immobilized on substrate to obtain a high adsorption capacity. Different adsorption conditions were investigated and the highest adsorption capacity (58.0 mg/g) was obtained on Sil@ZIF8@EIM-EIM at 30 °C during 60.0 min. When the sorbent was applied in the SPE process, 96.0% of the total amount of (+)-catechin from cocoa shell waste can be isolated after several washing and elution steps. The satisfactory recoveries of 97.5–100.2% and RSDs of 1.3–3.2% revealed that the SPE process was accurate and precise. The stability of Sil@ZIF8@EIM-EIM was tested in water and the reusability was tested using repeated adsorption/desorption process. The results revealed that Sil@ZIF8@EIM-EIM as an efficient sorbent can isolate (+)-catechin from cocoa shell waste.

Exploring ionic liquid-laden metal-organic framework composite materials as hybrid electrolytes in metal (ion) batteries

This review focuses on the combination of metal-organic frameworks (MOFs) and ionic liquids (ILs) to obtain composite materials to be used as solid electrolytes in metal-ion battery applications. Benefiting from the controllable chemical composition, tunable pore structure and surface functionality, MOFs offer great opportunities for synthesizing high-performance electrolytes. Moreover, the encapsulation of ILs into porous materials can provide environmentally benign solid-state electrolytes for electrochemical devices. Due to the versatility of MOF-based materials, in this review we also explore their use as anodes and cathodes in Li- and Na-ion batteries. Finally, solid IL@MOF electrolytes and their implementation into Li and Na batteries have been analyzed, as well as the design and advanced manufacturing of solid IL@MOF electrolytes embedded on polymeric matrices.

Controlling the Mobility of Ionic Liquids in the Nanopores of MOFs by Adjusting the Pore Size: From Conduction Collapse by Mutual Pore Blocking to Unhindered Ion Transport

Ionic liquids (ILs) in nanoporous confinement are the core of many supercapacitors and batteries, where the mobility of the nanoconfined ILs is crucial. Here, by combining experiments based on impedance spectroscopy with molecular dynamics simulations, the mobility of a prototype IL in the nanopores of an isoreticular metal-organic framework (MOF)-series with different pore sizes is explored, where an external electric field is applied. It has been found that the conduction behavior changes tremendously depend on the pore size. For small-pore apertures, the IL cations and anions cannot pass the pore window simultaneously, causing the ions to mutually block the pores. This results in a strong concentration dependence of the ionic conduction, where the conduction drops by two orders of magnitude when filling the pores. For large-pore MOFs, the mutual hindrance of the ions in the pores is small, causing only a small concentration dependence. The cutoff between the large-pore and small-pore behavior is approximately the size of a cation-anion-dimer and increasing the pore diameter by only 0.2 nm changes the conduction behavior fundamentally. This study shows that the pore aperture size has a substantial effect on the mobility of ions in nanoporous confinement and has to be carefully optimized for realizing highly-mobile nanoconfined ILs.

AuNP@ZeNose (ZIF-based electrochemical nose) for detection of flu biomarker in breath

A novel electrochemical sensor is reported for the detection of isoprene levels in breath using a ZIF-based electrochemical nose. This sensor incorporates a hybrid detection system using gold nanoparticles encapsulated inside the ZIF-8 moiety. Breath-based analysis is widely being used for monitoring the metabolic state of the body. It is associated with the change in the concentration of volatile organic compounds and inorganic gases released endogenously and can be tracked using breath as the sample. One such volatile organic compound, isoprene, has been correlated to the presence of influenza virus or respiratory inflammation. Analytical techniques such as powder X-ray diffraction, scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and tunneling electron microscopy were used to understand the structural features of the composite. The electrochemical nose system uses chronoamperometry as the transduction mechanism to monitor the diffusion kinetics of the target analyte across the electrode-electrolyte interface. The presented work demonstrates isoprene sensing with high sensitivity and specificity and a detection limit of 10 parts per billion in air. We successfully demonstrate the functionality of the ZIF-based electrochemical nose for point-of-care screening of isoprene levels by developing a prototype device using a commercially available development board. We foresee that the developed sensing platform can help in early screening for the presence of influenza virus and help control the infection rate.

MOF-supported crystalline ionic liquid: new type of solid electrolyte for enhanced and high ionic conductivity

Solid-state electrolyte (SSE) is crucial for a high-performance all-solid-state battery. Here, a new solid sodium electrolyte based on the ionic liquid EIMS-NaTFSI and one metal-organic framework (MOF) UiO-67-MIMS functionalized with zwitterion groups MIMS was obtained (UiO-67 and was assembled with 4,4'-biphenyldicarboxylate linker and cluster Zr₆O₄(OH)₄) (EIMS = 1-(1-ethyl-3-imidazolio)propane-3-sulfonate, NaTFSI = sodium bis(trifluoromethanesulfonyl)imide, MIMS = 1-(1-mthyl-3-imidazolio)propane-3-sulfonate). By contacting and pairing EIMS-NaTFSI (abbreviated as EN-1) to the MIMS group on the framework, EN-1 was directed and arranged along the channels within UiO-67-MIMS, forming a solid composite EN-1@UiO-67-MIMS with Bragg scatter, i.e., a crystalline ionic liquid containing Na⁺ salts (NaTFSI). Such an ionic liquid EN-1@UiO-67-MIMS bearing crystalline MOF matrix showed and preserved fast ion conduction (1.02 × 10^-2 S cm^-1) at 150 °C even after 30 days, and exhibited 1-2 orders of magnitude higher conductivities than the bulk ionic liquid EN-1 within a wide temperature range, although the ion content in the latter was higher. The infinite pathway paved by the EN-1 arranged and contacted the MIMS along the channels within MOF well accounts for the fast ion transmission and the stability of the solid-state electrolyte. Such MOF-based crystalline ionic liquid provides a new strategy for developing high-performance solid-state electrolytes for ions.

Ionic liquid-based magnetic nanoparticles for magnetic dispersive solid-phase extraction: A review

Due to their highly tunable nature and outstanding physicochemical properties, ionic liquids (ILs) have been widely reported for use in the synthesis of multitudinous magnetic nanoparticles (MNPs). IL-based magnetic nanoparticles (IL-MNPs) have great potential in magnetic dispersive solid-phase extraction (MDSPE). At present, IL-MNPs have been successfully applied in the pretreatment of MDSPE samples from medicines, pesticides, veterinary drugs, heavy metals, dyes, additives, and proteins in agricultural products, foods and beverages, environmental water, and biological samples. In this review, the preparation of IL-MNPs and their application in MDSPE are comprehensively summarized. The structural characteristics of the introduced ILs used to prepare the IL-MNPs and the synthetic routes employed to obtain the IL-MNPs are described, including physical coating and chemical bonding methods. The IL-MNPs are then classified and described according to different modified materials, including silica-based materials, carbon-based materials, metal-organic frameworks, molecularly imprinted polymers and other interesting large/small molecules. Finally, the research prospects and development directions of IL-MNPs in the context of MDSPE are further identified.

In-situ fabrication of ionic liquids/MIL-68(In)-NH2 photocatalyst for improving visible-light photocatalytic degradation of doxycycline hydrochloride

Metal-organic framework (MOFs)-based composites have been popular in photocatalysis due to their outstanding physicochemical properties, such as large surface area, high activity and good transmission properties. Herein, a method of ionic liquids (ILs)-assisted synthesis of IL/MIL-68(In)-NH₂ composite materials were proposed, and composites were used for visible light catalytic degradation of doxycycline hydrochloride (DOXH). The effects of four kinds of ionic liquids on the structure and photocatalytic properties of the composites were explored, including diethylenetriamine acetate ([DETA][OAc]), diethylenetriamine hexafluorophosphate ([DETA][PF₆]), 1-ethyl-3-methylimidazole acetate ([EMIM][OAc]) and 1-ethyl-3-methylimidazole hexafluorophosphate ([EMIM][PF₆]). The results show that the introduction of different ionic liquids affects the grain growth of MOFs material and photocatalytic activity. Among them, IL_DAc/MIL-68(In)-NH₂ samples showed the highest photocatalytic activity. 92% removal rate of doxycycline hydrochloride and kinetic degradation constant (0.00918 min^-1) was observed under the optimal addition of IL_DAc (10 wt%), which was 4.6 times that of MIL-68(In)-NH₂. The enhancement was attributed to a combined effect of efficient adsorption at low concentration, an increase of active sites, and efficient charge transfer. In addition, the effects of pH and initial concentration were investigated. Finally, the photocatalytic mechanism of DOXH was elucidated, and the possible intermediate products and degradation pathways were discussed. Considering the excellent photostability and ultra-fast photodegradation of IL_DAc/MIL-68(In)-NH₂, this study opens up a new prospect for the preparation of ionic liquids functionalized MOFs with wide practical application value.

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Robust ionic liquid@MOF composite as a versatile superprotonic conductor

A highly performing proton conducting composite was prepared through the impregnation of EMIMCl ionic liquid in the mesoporous MIL-101(Cr)-SO₃H MOF. The resulting EMIMCl@MIL-101(Cr)-SO₃H composite displays high thermal and chemical stability, alongside retention of a high amount of EMIMCl even at temperatures as high as 500 K, as well as under moisture conditions. Remarkably, this composite exhibits outstanding proton conductivity not only at the anhydrous state (σ_{473 K} = 1.5 × 10^-3 S cm^-S) but also under humidity (σ_{(343 K/60%-80%RH)} ≥ 0.10 S cm^-1) conditions. This makes EMIMCl@MIL-101(Cr)-SO₃H a unique candidate to act as a solid state proton conductor for PEMFC applications under versatile conditions.

Synthesis and application of [Zr-UiO-66-PDC-SO3H]Cl MOFs to the preparation of dicyanomethylene pyridines via chemical and electrochemical methods

A metal-organic framework (MOF) with sulfonic acid tags as a novel mesoporous catalyst was synthesized. The precursor of Zr-UiO-66-PDC was synthesized both via chemical and electrochemical methods. Then, zirconium-based mesoporous metal-organic framework [Zr-UiO-66-PDC-SO3H]Cl was prepared by reaction of Zr-UiO-66-PDC and SO3HCl. The structure of [Zr-UiO-66-PDC-SO3H]Cl was confirmed by FT-IR, PXRD, FE-SEM, TEM, BET, EDX, and Mapping analysis. This mesoporous [Zr-UiO-66-PDC-SO3H]Cl was successfully applied for the synthesis of dicyanomethylene pyridine derivatives via condensation of various aldehyde, 2-aminoprop-1-ene-1,1,3-tricarbonitrile and malononitrile. At the electrochemical section, a green electrochemical method has successfully employed for rapid synthesis of the zirconium-based mesoporous metal-organic framework UiO-66-PDC at room temperature and atmospheric pressure. The synthesized UiO-66-PDC has a uniform cauliflower-like structure with a 13.5 nm mean pore diameter and 1081.6 m2 g-1 surface area. The described catalyst [Zr-UiO-66-PDC-SO3H]Cl was also employed for the convergent paired electrochemical synthesis of dihydropyridine derivatives as an environmentally friendly technique under constant current at 1.0 mA cm-2 in an undivided cell. The proposed method proceeds with moderate to good yields for the model via a cooperative vinylogous anomeric based oxidation.

ZEUS (ZIF-based electrochemical ultrasensitive screening) device for isopentane analytics with focus on lung cancer diagnosis

Breath analytics is currently being explored for the development of point-of-care devices in non-invasive disease detection. It is based on the measurement of volatile organic compounds (VOCs) and gases that are produced by the body because of the metabolic pathways. The levels of these metabolites vary due to alteration in the endogenous oxidative stress-related metabolic pathways and can be correlated to understand the underlying disease condition. The levels of exhaled hydrocarbons in human breath can be used to design a rapid, easy to use method for lung cancer detection. This work outlines the development of an electrochemical sensing platform that can be used for the non-invasive diagnosis of lung cancer by monitoring isopentane levels in breath. This electrochemical sensor platform involves the use of [BMIM]BF₄@ZIF-8 for sensing the target analyte. This synthesized nanocomposite offers advantages for gas sensing applications as it possesses unique properties such as an electrochemically active Room Temperature Ionic Liquid (RTIL) and a crosslinking Metal Organic Framework (MOF) that provides increased surface area for gas absorption. This is the first report of a hydrocarbon-based sensor platform developed for lung cancer diagnosis. The developed sensor platform displays sensitivity and specificity for the detection of isopentane up to 600 parts-per-billion. We performed structural and morphological characterization of the synthesized nanocomposite using various analytical techniques such as PXRD, FESEM, FTIR, and DLS. We further analyzed the electrochemical activity of the synthesized nanocomposite using a standard glassy carbon electrode. The application of the nanocomposite for isopentane sensing was done using a commercially available carbon screen printed electrode. The results so obtained helped in strengthening our hypothesis and serve as a proof-of-concept for the development of a breathomics-enabled electrochemical strategy. We illustrated the specificity of the developed nanocomposite by cross-reactivity studies. We envision that the detection platform will allow sensitive and specific sensing of isopentane levels such that it can used for point of care applications in noninvasive and early diagnosis of lung cancer, thereby leading to its early treatment and decrease in mortality rate.

A novel synthesized [BMIM]BF₄@ZIF-8 nanocomposite for electrochemical sensing of isopentane as a biomarker for lung cancer diagnosis.

Structural and Dynamic Insights into the Conduction of Lithium-Ionic-Liquid Mixtures in Nanoporous Metal-Organic Frameworks as Solid-State Electrolytes

Metal-organic framework (MOF)-based separators in Li-ion batteries (LIBs) have the potential to improve the battery performance. The mobility and conduction of lithium and organic ionic liquids (ILs) in these materials acting as (quasi) solid-state electrolytes are crucial for the battery power output. Here, we investigate the mobility of a Li-based IL in MOF nanopores and unveil the details of the conduction mechanism by molecular dynamics (MD) simulations. A complex conductivity depending on the Li-IL loading and on the IL composition is observed. Most importantly, the presence of Li prevents the collapse of the conductivity at high IL loadings. The fully atomistic MD simulations including guest-guest and guest-host interactions elucidate the competing mechanisms: Li follows a Grotthuss-like conduction mechanism with large mobility. While at small pore fillings, the Li conduction is limited by the large distance between the anions facilitating the Grotthuss-like conduction; the conduction at high pore fillings is governed by field-induced concentration inhomogeneities. Because of the small MOF pore windows, which hinders the simultaneous passage of the large IL cations and anions in opposite directions, the IL shows field-induced MOF pore blocking and ion bunching. The regions of low anion concentration and high cation concentration represent barriers for Li, decreasing its mobility. In comparison to Li-free IL, the IL bunching effect is attenuated by the formation of charge-neutral Li-anion complexes, resulting in a tremendously increased conductivity at maximum pore filling. The exploitation of this mechanism may enhance the development of advanced batteries based on IL and nanoporous separators.

Self-assembly of TiO2/ZIF-8 nanocomposites for varied photocatalytic CO2 reduction with H2O vapor induced by different synthetic methods

Photoreduction of carbon dioxide (CO₂) provides an effective perspective for solving the energy crisis and environmental problems. Herein, two types of composite photocatalysts (TiO₂/ZIF-8) based on ZIF-8 and TiO₂ have been designed and synthesized with the help of the grinding method and the solid-synthesis method. Both composite photocatalysts are employed for the photocatalytic reduction of CO₂. In composite photocatalysts prepared by the grinding method, ZIF-8 particles are distributed on the surface of TiO₂, and provide extra available spaces for storing CO₂, which is beneficial for improving their photoreduction performances. As a result, an enhanced CO formation rate of 21.74 μmol g^-1 h^-1 with a high selectivity of 99% is obtained for this family of composite photocatalysts via the solid-gas mode without photosensitizers and sacrificial agents. For comparison, the other family of composite photocatalysts synthesized via the solid-synthesis method possesses structures similar to ZIF-8, where TiO₂ is encapsulated inside the framework of ZIF-8. This structural feature obstructs the contact between the active sites of TiO₂ and CO₂, and leads to lower activities. The best CO formation rate of this family is only 10.67 μmol g^-1 h^-1 with 90% selectivity. Both the structural features of the two families of photocatalysts are described to explain their differences in photoreduction performances. The experimental finding reveals that different synthetic approaches indeed result in diversified structures and varied photocatalytic performances. This work affords a new scalable and efficient approach for the rational design of efficient photocatalysts in the area of artificial photosynthesis.

Aminoethylimidazole ionic liquid-grafted MIL-101-NH2 heterogeneous catalyst for the conversion of CO2 and epoxide without solvent and cocatalyst

An aminoethylimidazole IL-functionalized MIL-101-NHIM-NH₂ catalyst efficiently catalyzes the cycloaddition reaction of CO₂ and epoxide without solvent and cocatalyst, owing to the synergistic effects of Cr, –NH₂ and Br⁻ active sites.

Deep eutectic solvents for the preparation and post-synthetic modification of metal- and covalent organic frameworks

The use of deep eutectic solvents (DES) as media for the preparation of metal- and covalent organic frameworks (MOFs and COFs) and their post-synthetic modification towards composites is reviewed.

Optimizing Strategy for Enhancing the Stability and 99TcO4 - Sequestration of Poly(ionic liquids)@MOFs Composites

Metal-organic frameworks (MOFs) are a class of promising sorbents for effective sequestration of radioactive ⁹⁹TcO₄ ^- anions. However, their poor stability and slow sorption kinetics in the industrial condition pose a great challenge. Herein, we demonstrate an optimizing strategy via in situ polymerization of ionic liquids (ILs) encapsulated in the pores of MOFs, forming polyILs@MOFs composites with greatly enhanced TcO₄ ^- sequestration compared with the pristine MOFs. Notably, the cross-linked polymerization of ILs facilitates the formation of both the inside ionic filler as the active sites and outside coating as the protective layers of MOFs, which is significantly beneficial to obtain the optimized sorption materials of exceptional stability under extreme conditions (e.g., in 6 M HNO₃). The final optimized composite shows fast sorption kinetics (<30 s), good regeneration (>30 cycles), and superior uptake performance for TcO₄ ^- in highly acidic conditions and simulated recycle stream. This strategy opens up a new opportunity to construct the highly stable MOF-based composites and extend their applicability in different fields.

Heterogeneous Catalysis with the Participation of Ionic Liquids

This mini-review briefly describes the recent progress in the design and development of catalysts based on the presence of ionic liquids. In particular, the focus was on heterogeneous systems (supported ionic liquid (IL) phase catalysts (SILPC), solid catalysts with ILs (SCILL), porous liquids), which due to the low amounts of ionic liquids needed for their production, eliminate basic problems observed in the case of the employment of ionic liquids in homogeneous systems, such as high price, high viscosity, and efficient isolation from post-reaction mixtures.

Enhanced proton conductivity of metal organic framework at low humidity by improvement in water retention

A series of composites have been fabricated by introducing ionic liquid (IL) (ship) into chromium terephthalate MIL-101 (bottle) by ship-in-bottle method (IL@MIL-101s), the resulting IL@MIL-101s are endowed to high water retention, which is essential to proton conducting on multiple energy-involved applications at the low relative humidity (RH). The humidifying IL can lower water loss and increase water uptake, and thus improves water retention properties of the composites aided by the mesoporous MIL-101 at low RH. The hydropenic proton transfer pathways are modeled inside MOF and between IL-MOF, diminishing energy barrier routes for proton hopping, and thus a promotive proton transfer is rendered via Grotthuss mechanism. Specially, the IL@MIL-101 (SIB-3) unfolds a high proton conductivity (σ = 4.4 × 10^-2 S cm^-1) at RH as low as ~23%, five orders of magnitude increase than that of parent MIL-101 (1.1 × 10^-7 S cm^-1) at 323 K. Besides, IL@MIL-101s as fillers are incorporated into polymer blends to form hybrid membranes, appearing the relatively high proton conductivity (4.3 × 10^-3 S cm^-1) under ~23% RH at 323 K.

Salt nanoconfinement in zirconium-based metal-organic frameworks leads to pore-size and loading-dependent ionic conductivity enhancement

The effect of nanoscale confinement of a salt on its ionic conductivity was studied for [NEt4][TFSI] melt-loaded in three isoreticular zirconium-based MOFs: UiO-66, UiO-67, and PCN-56. Conductivity of the MOF-salt composites was up to a factor of 50 higher than the pure salt, and maximized with slightly less than full loading of the MOFs.