Influence of pH on heavy metal speciation and removal from wastewater using micellar-enhanced ultrafiltration

Mechanistic Insights into Micelle-Enhanced Nanofiltration for Heavy Metal Removal: Transformation of Ion Transport and Fouling Phenomena

Toxic heavy metals are widely present in typical scenarios, such as mines and electroplating wastewater, presenting significant risks to biological and environmental safety. Membrane processes encounter a challenge in effectively intercepting heavy metals due to their small hydration radius. This research showcases the high efficiency of micelle-enhanced nanofiltration (MENF) in removing heavy metals. At the critical micelle concentration, sodium dodecyl sulfate demonstrated a high removal of Cu2+, Ni2+, Zn2+, and Cd2+ while maintaining substantial potential for complexation of heavy metals. The formation of micelles and the bonding of heavy metals with surfactants bolstered the resistance of heavy metal ions to transmembrane transport. The presence of heavy metals in ionic form in wastewater facilitated their complexation with surfactants or micelles. Notably, the valence state and concentration of interfering ions in the environment could slightly influence the removal of heavy metals by MENF. Additionally, MENF displayed remarkable antifouling properties. The loose gel layer created by surfactant molecules and the micelle enhanced the membrane permeability and reduced the scaling tendency of heavy metals. This study contributes to an improved understanding of the mechanisms involved in heavy metal rejection by using MENF.

Contribution of Cd passivating functional bacterium H27 to tobacco growth under Cd stress

The cadmium (Cd) embedded in tobacco not only affects yield and quality but also harms human health. Microbial remediation has attracted widespread attention due to its low cost and minimal risk of secondary pollution. Therefore, researching microbes capable of inhibiting crop absorption of heavy metals or removing heavy metals from the environment has significant practical implications. This study screened a strain named H27 with a Cd immobilization efficiency of up to 76.60%. Static cultivation experiments showed that immobilization of Cd by H27 is achieved through intracellular absorption, hydroxyl, carboxyl, and phosphate group reactions on the cell wall. The bacterium can also secrete extracellular substances to adsorb Cd and increase the environmental pH, reducing the bioavailability of Cd. H27 reduced the accumulation of Cd in the stems of hydroponically grown tobacco by 55.23% and decreased the expression of three Cd transport genes, HAM2, IRT1, and NRAMP1, in the roots. Additionally, H27 increased the mineralization rate of organic matter, increased the content of humic acid in the soil, promoted the formation of smaller soil particles, and enhanced the adsorption and fixation of Cd by soil components while simultaneously raising the pH of rhizosphere and non-rhizosphere soils in tobacco growth environments. Both hydroponic and potted experiments showed that H27 alleviated the inhibitory effect of Cd on tobacco growth, significantly reducing Cd accumulation in various parts of tobacco and lowering the transfer coefficient of Cd within the tobacco plant. This study aims to effectively reduce the Cd content in tobacco using microbes, mitigate the harm of heavy metals in cigarettes to human health, and provide theoretical and practical basis for the application of microbial techniques to control heavy metal absorption in tobacco.

Aging properties of polyethylene and polylactic acid microplastics and their adsorption behavior of Cd(II) and Cr(VI) in aquatic environments

In this study, we examined the aging characteristics of polyethylene (PE) and polylactic acid (PLA) microplastics (MPs), examining the adsorption behaviors and mechanisms concerning Cd(II) and Cr(VI) under both single and binary systems. The results revealed that aging treatment changed the physicochemical properties of MPs. The aging mechanisms of PLA and PE MPs were shown to be similar by the 2D-FTIR-COS study. These mechanisms involve the formation of oxygen-containing functional groups through the combination of carbon chain breakdown and oxygen. Aged MPs had a greater ability to adsorb metal ions than pristine MPs, with PLA MPs outperforming PE MPs. After 30 days of aging, Cd(II) adsorption increased by 40.61 % and 25.49 % for PE and PLA MPs, respectively, while Cr(VI) adsorption increased by 37.50 % and 69.29 %, respectively. The adsorption ability of PE and PLA MPs with Cd(II) or Cr(VI) under binary systems was less than that under single systems, with Cd(II) exhibiting more adsorption competitiveness than Cr(VI). Humic acid (HA), ionic species and strength, solution pH, and adsorption of Cd(II) and Cr(VI) were found to be significantly correlated. Further investigation into the adsorption mechanisms of Cd(II) and Cr(VI) on PE and PLA MPs revealed that pore-filling, electrostatic interactions, complexation, and hydrogen bonding play important roles in the adsorption process. The study's conclusions are crucial for assessing the risk associated with concurrent contamination by metal ions and microplastics.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Assessing metal extraction from metalliferous waste: A study using deep eutectic solvents and chelating agents vs. ethylenediaminetetraacetic acid

Conventional methods of metal recovery involving solvents have raised environmental concerns. To address these concerns and promote sustainable resource recovery, we explored the use of deep eutectic solvents (DES) and chelating agents (CA) as more environmentally friendly alternatives. Goethite and blast oxide slag dust (BOS-D) from heap piles at their respective sites and characterised via ICP-MS. The greatest extraction of critical metals was from goethite, removing 38% of all metals compared to 21% from the blast oxide slag. Among the tested CA, nitrilotriacetic acid (NTA) was the most effective, while for DES, choline chloride ethylene glycol (ChCl-EG) demonstrated superior performance in extracting metals from both blast oxide slag dust and goethite. The study further highlighted the selectivity for transition metals and metalloids was influenced by the carboxyl groups of DES. Alkaline metals and rare earth lanthanides extractions were favoured with DES due to improved mass transfer and increased denticity, respectively. In comparison to ethylenediaminetetraacetic acid (EDTA), typically used for metal extraction, CA and DES showed comparable extraction efficiency for Fe, Cu, Pb, Li, Al, Mn, and Ni. Using these greener chelators and solvents for metal extraction show significant promise in enhancing the sustainability of solvometallurgy. Additional conditions e.g., temperature and agitation combined with a cascading leaching process could further enhance metal extraction potential.

Nitrate removal from contaminated groundwater by micellar-enhanced ultrafiltration using a polyacrylonitrile membrane with a hydrogel-stabilized ZIF-L layer

Contamination of groundwater by nitrate from intensive agriculture is a serious problem globally. Excessive fertilization has led to nitrate contamination of the Coastal Aquifer in Israel. Here we report the efficient removal of nitrate from contaminated groundwater by micellar-enhanced ultrafiltration (MEUF) using a specially tailored membrane. Graft polymerization with hydrophilic poly(methacrylate) and incorporation of porous zeolitic imidazole framework ZIF-L nanoparticles imparted antifouling properties to the membrane. The resulting modified membrane showed high water permeance (82.2 ± 1.7 L·m-2·h-1·bar-1). The efficiency of nitrate removal by MEUF was tested using cetylpyridinium chloride as a surfactant in nitrate-contaminated groundwater collected from the Coastal Aquifer of Israel. The membrane reduced nitrate levels from 40-70 to levels of 6.8-29.5 mg·L-1, depending on the groundwater composition; further reduction to 6.1-24.1 mg·L-1 with complete surfactant rejection was achieved via two-stage membrane filtration, which showed high permeate flux (between 32.1 ± 0.9 and 45.9 ± 0.6 L·m-2·h-1) at 2 bar. The membrane maintained stable separation performance during multiple cycles, and the flux recovery ratio was >93 %. Nitrate concentrations fell well below the acceptable limit for drinking water, allowing the treated water to be used without restriction. Overall, the membrane has the potential to allow efficient removal by MEUF of nitrate from contaminated groundwater.

Microbial assisted multifaceted amelioration processes of heavy-metal remediation: a clean perspective toward sustainable and greener future

Rapidly increasing heavy metal waste has adversely affected the environment and the Earth's health. The lack of appropriate remediation technologies has worsened the issue globally, especially in developing countries. Heavy-metals contaminants have severely impacted the environment and led to devastating conditions owing to their abundance and reactivity. As they are nondegradable, the potential risk increases even at a low concentration. However, heavy-metal remediation has increased with the up-gradation of technologies and integration of new approaches. Also, of all the treatment methodologies, microbial-assisted multifaceted approach for ameliorating heavy metals is a promising strategy for propagating the idea of a green and sustainable environment with minimal waste aggregation. Microbial remediation combined with different biotechniques could aid in unraveling new methods for eradicating heavy metals. Thus, the present review focuses on various microbial remediation approaches and their affecting factors, enabling recapitulation of the interplay between heavy-metals ions and microorganisms. Additionally, heavy-metals remediation mechanisms adapted by microorganisms, the role of genetically modified (GM) microorganisms, life cycle assessment (LCA), techno-economic assessment (TEA) limitations, and prospects of microbial-assisted amelioration of heavy-metals have been elaborated in the current review with focus toward "sustainable and greener future."

Cyanoremediation of heavy metals (As(v), Cd(ii), Cr(vi), Pb(ii)) by live cyanobacteria (Anabaena variabilis, and Synechocystis sp.): an eco-sustainable technology

The cyanoremediation technique for heavy metal (HM) removal from wastewater using live cyanobacteria is promising to reduce the pollution risk both for the environment and human health. In this study, two widely recognized freshwater cyanobacteria, Anabaena variabilis and Synechocystis sp., were used to explore their efficacy in HM (As(v), Cd(ii), Cr(vi), Pb(ii)) removal. The different optimum adsorption conditions were pH 8 and 7.5 for A. variabilis and Synechocystis sp., respectively, but the temperature (25 °C) and contact time (48 hours) were the same for both strains. Under these specified conditions, A. variabilis exhibited the capability to remove 25% of As(v), 78% of Cd(ii), 54% of Cr(vi), and 17% of Pb(ii), whereas Synechocystis sp. removed 77% of As(v), 57% of Cd(ii), 91% of Cr(vi), and 77% of Pb(ii) at different initial concentrations. Metal diversity interfered negatively with cyanobacterial growth, especially Cd(ii) and As(v), as measured by OD730, dry biomass, chlorophyll a, and carotenoid production for both strains. Fourier transform infrared spectrum (FT-IR) analysis revealed the existence of diverse surface binding sites for HM adsorption, stemming from proteins and polysaccharides. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) confirmed the presence of HMs on the surface of the cyanobacterial cells. Finally, the zeta potential results indicating alterations in the surface negative charges elucidated the adsorption mechanisms involved in the HM removal by both cyanobacteria. These results provided a comprehensive understanding of the HM adsorption mechanism by cyanobacteria, offering valuable theoretical insights that can be extrapolated to enhance our comprehension of the cyanoremediation mechanisms by various other cyanobacterial strains.

A critical review of the mechanisms, factors, and performance of pervious concrete to remove contaminants from stormwater runoff

Stormwater can carry pollutants accumulated on impervious surfaces in urban areas into natural water bodies in absence of stormwater quality improvement devices. Pervious concrete (PC) pavement is one of the low-impact development practices introduced for urban flooding prevention and stormwater pollution reduction. PC removes various types of water contaminants. Mechanisms contributing to the water pollution removal capacity of PC can be categorized into three groups: physical, chemical, and biological. Properties of PC such as permeability, porosity, thickness, and adsorption capacity influence removal of all contaminants, although their impact might differ depending on the pollutant properties. Chemical mechanisms include precipitation, co-precipitation, ion and ligand exchange, complexation, diffusion, and sorption. Bulk organics and nutrients are removed primarily by biodegradation. Physical filtration is the primary mechanism to retain suspended solids, although biological activities may have a minor contribution. Release of calcium (Ca2+) and hydroxide (OH-) from hardened cement elevates the effluent pH, which is an environmental concern. However, the pH elevation is also the prime contributor to heavy metals and nutrients removal through precipitation. Specific cementitious materials (e.g., Pozzolans and nanoparticles) and carbonation curing approach are recommended to control effluent pH elevation. Complexation, diffusion, ion solubility, and stability constants are other mechanisms and parameters that influence heavy metal removal. Organic matter availability, electrostatic attraction, temperature, pH, contact time, specific surface area, and roughness of PC pores contribute to the pathogen removal process. Although PC has been found promising in removing various water pollutants, limited salinity removal can be achieved due to the inherent release of Ca2+and OH- from PC.

Adsorption of Sb(III) and Pb(II) in wastewater by magnetic γ-Fe2O3-loaded sludge biochar: Performance and mechanisms

Magnetically modified carbon-based adsorbent (BC@γ-Fe2O3) was prepared through facile route using activated sludge biomass and evaluated for the simultaneous removal of Sb(III) and Pb(II). BC@γ-Fe2O3 exhibited outstanding Sb(III) and Pb(II) adsorption capacity when 200 mg of adsorbent was employed at pH 5.0 for 240 min, with the removal efficiency higher than 90%. The experiments demonstrated the excellent reusability and the potent anti-interference properties of the prepared absorbent. Freundlich and pseudo-second-order kinetic were prior to describe the adsorption process. The adsorption of Sb(III) and Pb(II) onto BC@γ-Fe2O3 was spontaneous and endothermic. BC@γ-Fe2O3 with high specific surface area revealed the exceptional competence to absorb Sb(III) and Pb(II) through pore filling, electrostatic adsorption and complexation. The adsorption mechanisms of Sb(III) and Pb(II) showed similarities with slight disparities. The removal of Sb(III) involved the Fe-O-Sb bond and π-π bond, while the adsorption of Pb(II) was closely related to ion exchange. Moreover, Sb(III) was oxidized to Sb(V) in a minor part during adsorption. The Fe-O-Cl active sites on BC allowed for the binding of γ-Fe2O3, guaranteeing the abundant adsorption sites and stability. BC@γ-Fe2O3 provides an efficient and green insight into the simultaneous removal of complex heavy metals with promising application in wastewater treatment.

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Remediation of Pb(II) and Cd(II) in polluted waters with calcium thioglycolate-modified straw biochar

The pollution of water bodies by heavy metals (HMs) such as Pb(II) and Cd(II) poses a serious environmental risk. Herein, rice straw biochar (RBC) modified with calcium thioglycolate was used to remove Pb(II) and Cd(II) from aqueous solutions. The adsorption performance of the modified biochar was investigated via adsorption kinetics and isotherm model fitting. Furthermore, scanning electron microscopy (SEM), X-ray energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) were used to elucidate the modification and adsorption mechanisms. The results showed that the modification process loaded sulfur-containing functional groups, calcium carbonate, and calcium oxalate crystals on the biochar surface, considerably enhancing its complexation performance and ion-exchange capacity. The equilibrium adsorption amounts for Pb(II) and Cd(II) reached 124.92 and 65.44 mg g-1 in unary systems, respectively; they reached 121.34 and 39.43 mg g-1 in a binary Pb(II) and Cd(II), respectively. Moreover, the optimal adsorption conditions were as follows: pH = 6, temperature = 25 °C, dosage = 0.8 g L-1, and contact time = 2 h. In the binary Pb(II) and Cd(II) system, the adsorption process obeyed the Langmuir competitive adsorption model, which means that one adsorption site on the modified biochar was effective for only one heavy-metal ion, and the modified biochar was more selective for Pb(II) than for Cd(II). The adsorption mechanism, which was dominated by chemisorption, mainly involved complexation, precipitation, ion exchange, and cation-π interactions. Meanwhile, adsorption and desorption experiments indicated that the modified biochar exhibited satisfactory recycling performance, demonstrating its feasibility as an inexpensive and efficient heavy-metal adsorbent for polluted water.

Efficiency of Ppy-PA-pani and Ppy-PA composite adsorbents in Chromium(VI) removal from aqueous solution

In this study, first time the combination of composites with Phytic acid (PA) as the organic binder cross-linker is reported. The novel use of PA with single and double conducting polymers (polypyrrole (Ppy) and polyaniline (Pani)) were tested against removal of Cr(VI) from wastewater. Characterizations (FE-SEM, EDX, FTIR, XRD, XPS) were performed to study the morphology and removal mechanism. The adsorption removal capability of Polypyrrole - Phytic Acid - Polyaniline (Ppy-PA-Pani) was deemed to be higher than Polypyrrole - Phytic Acid (Ppy-PA) due to the mere existence of Polyaniline as the extra polymer. The kinetics followed 2nd order with equilibration at 480 min, but Elovich model confirmed that chemisorption is followed. Langmuir isotherm model exhibited maximum adsorption capacity of 222.7-321.49 mg/g for Ppy-PA-Pani and 207.66-271.96 mg/g for Ppy-PA at 298K-318K with R2 values of 0.9934 and 0.9938 respectively. The adsorbents were reusable for 5 cycles of adsorption-desorption. The thermodynamic parameter, ΔH shows positive values confirmed the adsorption process was endothermic. From overall results, the removal mechanism is believed to be chemisorption through Cr(VI) reduction to Cr(III). The use of phytic acid (PA) as organic binder with combination of dual conducting polymer (Ppy-PA-Pani) was invigorating the adsorption efficiency than just single conducting polymer (Ppy-PA).

Ultra-purification of heavy metals and robustness of calcium silicate hydrate (C-S-H) nanocomposites

For the sake of remediating the contamination of heavy metal ions (HMs) that poses high risk to the global environment, a novel inorganic nanocomposite with excellent robustness, calcium silicate hydrate (C-S-H), is synthesized at extremely low cost yet presents rapid adsorption rate and superhigh adsorption capacity. High concentrations of Cu(Ⅱ), Cd(Ⅱ), Co(Ⅱ) and Cr(Ⅲ) in wastewater can be purified to ultra-low level (∼0.008 mg L^-1) within 60 min at low C-S-H dosage, the concentration and pH indexes of which meet the standard for direct discharge in China. The adsorption processes are spontaneous, following the Langmuir adsorption isotherm model, and its kinetics conforms to pseudo-second order model. Meanwhile, C-S-H presents excellent anti-interference performance during the ultra-purification of HMs when exposed to the acid environments, solutions with various HMs as well as high salinity. The ultra-purification of HMs and robustness of C-S-H is realized through multiple mechanisms based on adsorption, involving hydrolysis of HMs, electrostatic interaction, chemical microprecipitation, surface complexation and interlayer complexation, among which interlayer complexation is dominant. All these verify the robust performance and broad applicability of C-S-H to complex aqueous systems.

Impact of microplastics on lead-contaminated riverine sediments: Based on the enzyme activities, DOM fractions, and bacterial community structure

Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.

A fluorescent biosensor for Cd2+ detection in water samples based on Cd2+-fueled wheel DNAzyme walker and its logic gate applications

A fluorescent biosensor was developed for Cd²⁺ detection based on a Cd²⁺-fueled wheel DNAzyme walker. Cd²⁺ can activate the wheel to roll along the DNA walking tracks through DNAzyme cleavage and toehold-mediated strand displacement. The substrate strand was modified with BHQ and Cy5. Through continuous cleavage reactions toward the substrate strands, a high fluorescence signal can be obtained. The biosensor is ultrasensitive, and the detection limit is 0.2 pM (S/N = 3). The fluorescent assay is robust and has been applied to the determination of Cd²⁺ in real water samples with good accuracy and reliability. Using Cd²⁺, Pb²⁺, and Hg²⁺ as the three inputs, we also construct a concatenated AND logic gate. The input combination of (111) can produce an output of 1. Other input combinations produce an output of 0. Our proposed detection platform and logic system hold great promise for the ultrasensitive and intelligent sensing of different heavy metal ions in water samples.

Feather-weight cryostructured thiourea-chitosan aerogels for highly efficient removal of heavy metal ions and bacterial pathogens

Designing of economically feasible and recyclable polysaccharide-based materials with thiourea functional groups for removal of specific metal ions such as Ag(I), Au(I), Pb(II) or Hg(II) remains a major challenge for environmental applications. Here, we introduce ultra-lightweight thiourea-chitosan (CSTU) aerogels engineered by combining successive freeze-thawing cycles with covalent formaldehyde-mediated cross-linking and lyophilization. All aerogels exhibited outstanding low densities (0.0021-0.0103 g/cm³) and remarkable high specific surface areas (416.64-447.26 m²/g), outperforming the common polysaccharide-based aerogels. Benefitting from their superior structural features (honeycomb interconnected pores and high porosity), CSTU aerogels demonstrate fast sorption rates and excellent performance in sorption of heavy metal ions from highly-concentrated single or binary-component mixtures (1.11 mmol Ag (I)/g and 0.48 mmol Pb(II)/g). A remarkable recycling stability was observed after five sorption-desorption-regeneration cycles when the removal efficiency was up to 80 %. These results support the high potential of CSTU aerogels in the treatment of metal-containing wastewater. Moreover, the Ag(I)-loaded CSTU aerogels exhibited excellent antimicrobial properties against Escherichia coli and Staphylococcus aureus bacterial strains, the killing rate being around 100 %. This data points towards the potential application of developed aerogels in circular economy, by employing the spent Ag(I)-loaded aerogels in the biological decontamination of waters.

Amino-terminated SiO2-Al2O3 composite aerogels from fly ash for improved removal of Cu2+ and Pb2+ ions in wastewater: one-pot synthesis, excellent adsorption capacity and mechanism

In this study, by using a sol-gel grafting-atmospheric drying method, amino-terminated SiO₂-Al₂O₃ composite aerogels, namely 3-aminopropyltriethoxysilane (APTES) or 3-(2-amino-ethoxy) propylmethyldimethoxysilane (AEAPMDS) modified SiO₂-Al₂O₃ aerogels (AMSAAs), were synthesized from the fly ash and characterized by field-emission scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy etc.. And the AMSAAs were verified as excellent adsorbents for removing heavy metal ions (Cu²⁺ and Pb²⁺ ions) from wastewater. The effects of modification conditions and testing parameters including pH value, adsorbent dose, initial ions concentration, adsorption time and temperature were systematically investigated. Results demonstrated that 0.2 mol/L APTES modified aerogels (0.2APTES-SAAs) possessed the best adsorption properties. Under the optimal pH value of 4.0-6.0 and the adsorbent dose of 0.4-0.6 g/L, the equilibrium adsorption capacities of Cu²⁺ and Pb²⁺ ions were as high as 195 mg/g and 500 mg/g within 20-30 min, respectively. The adsorption processes were agreed fairly well with Freundlich isotherm adsorption model and the pseudo-second-order kinetic model, which indicated that the adsorption processes were heterogeneous multilayer adsorption and controlled by the chemical reaction between AMSAAs and heavy metal ions. The obtained adsorption thermodynamic parameters (ΔH°, ΔS° and ΔG°) revealed that the adsorption processes were exothermic and spontaneous with decreased randomness at the solid-liquid interface. The excellent recyclability of as-prepared AMSAAs proved as economically promising adsorbents for practical applications.

Unlocking the potential of polymeric desalination membranes by understanding molecular-level interactions and transport mechanisms

Polyamide reverse osmosis (PA-RO) membranes achieve remarkably high water permeability and salt rejection, making them a key technology for addressing water shortages through processes including seawater desalination and wastewater reuse. However, current state-of-the-art membranes suffer from challenges related to inadequate selectivity, fouling, and a poor ability of existing models to predict performance. In this Perspective, we assert that a molecular understanding of the mechanisms that govern selectivity and transport of PA-RO and other polymer membranes is crucial to both guide future membrane development efforts and improve the predictive capability of transport models. We summarize the current understanding of ion, water, and polymer interactions in PA-RO membranes, drawing insights from nanofiltration and ion exchange membranes. Building on this knowledge, we explore how these interactions impact the transport properties of membranes, highlighting assumptions of transport models that warrant further investigation to improve predictive capabilities and elucidate underlying transport mechanisms. We then underscore recent advances in in situ characterization techniques that allow for direct measurements of previously difficult-to-obtain information on hydrated polymer membrane properties, hydrated ion properties, and ion-water-membrane interactions as well as powerful computational and electrochemical methods that facilitate systematic studies of transport phenomena.

Evaluation of the Hybrid Membrane of ZnO Particles Supported in Cellulose Acetate for the Removal of Lead

Water polluted by discarded heavy metals such as lead is creating a global pollution problem. In this work, adsorption of Pb(II) was realized in batch studies by a hybrid membrane of cellulose acetate with ZnO particles. First, ZnO particles were prepared by precipitation and immobilized on the membrane. The hybrid membrane was elaborated by interfacial polymerization. The structure and surface were characterized based on Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Batch experiments were carried out under different conditions where the number of particles of ZnO present in the membrane and the pH of the aqueous solution were varied. The Langmuir and Freundlich isotherm models were evaluated in the best adsorption conditions. Data fitted well with a Langmuir model with a maximum adsorption capacity of 15.55 mg·g^-1, which was similar for this type of materials. Thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy showed that the process was spontaneous and favorable. The hybrid membrane was evaluated in simulated wastewater of the battery industry with a superior efficiency of up to 97%; without the medium, it did not generate interference. These results suggest that Pb(II) removal by hybrid membrane is possible.

Aging of polylactic acid microplastics during hydrothermal treatment of sewage sludge and its effects on heavy metals adsorption

Microplastics' (MPs) aging process and environmental behavior have attracted extensive attention due to the potential long-term ecological impact. MPs enriched in sludge may accelerate aging during sludge treatment and the affecting environmental behavior, i.e., adsorption performance for pollutants. However, the related studies have not been well researched, especially for the biodegradable MPs. This study revealed the influences of hydrothermal treatment on the characteristics of polylactic acid microplastics (PLA-MPs) and the consequences on heavy metals adsorption. The changes in PLA-MPs' physiochemical properties were characterized and compared. PLA-MPs' surface became irregular, and the oxygen-containing functional groups increased through FTIR and XPS analysis. Meanwhile, the molecular weight and crystallinity of PLA-MPs decreased significantly with the rising in hydrothermal temperature. Accordingly, the adsorption capacity of PLA-MPs for Pb²⁺ increased from 93.97 μg g^-1 for the raw PLA-MPs to 1058.03 μg g^-1 for the aged PLA-MPs. Multiple adsorption kinetics and isotherms were discussed for the Pb²⁺ adsorption onto PLA-MPs with different aging of the PLA-MPs. The adsorption mechanisms of Pb²⁺ relate to electrostatic interaction and complexation. The main difference is that the adsorption for raw PLA-MPs is dominated by physical and chemical adsorption, whereas the adsorption for the aged PLA-MPs prefers chemical adsorption. In addition, we carefully evaluated the influences of pH, dissolved organic matter, and ionic strength on the PLA-MPs adsorption. The present study highlighted the significance of hydrothermal treatment on the MPs aging and the adsorption performance.

Synthesis and Characterization of Hydroxyethyl Cellulose Grafted with Copolymer of Polyaniline and Polypyrrole Biocomposite for Adsorption of Dyes

The emerging concepts of sustainable textiles and controlled production strategy demands ideally zero emissions of contaminants into the aquatic environment. However, the currently in-practiced conventional processes in textiles dispose of a number of contaminants especially super toxic synthetic dyes as effluents. In recent years, nanomaterials have become attractive choice for eco-friendly removal of organic dyestuff. Accordingly, this article reports synthesis and characterization of biocomposite wherein copolymer of polyaniline (PANI) and Polypyrrole (PPY) was grafted onto hydroxyethyl cellulose (HEC). Further, adsorption properties of as-prepared composite were evaluated using textile dyes Rhodamine B (RhB) and methyl Orange (MO)- as model adsorbate. The characterization of novel biocomposite (HEC/PANI-PPy) was carried out using Fourier Transform Infrared (FT-IR), Brunauer-Emmett-Teller analyzer (BET), Scanning Electron Microscope (SEM), and powder X-ray diffraction (XRD). The operational parameters such as dye initial concentration, adsorbent amount, pH and contact time were also studied to evaluate the efficiency level of the prepared biocomposite. Interestingly, the composite-mediated adsorption of RhB and MO followed pseudo-second order and the Langmuir isotherm. It is found that the adsorption capacity HEC/PANI-PPy is 30.06 and 29.3 for RhB and MO respectively. Thus, HEC/PANI-PPy is an inexpensive and highly efficient adsorbent that could be employed for could be employed for the separation and removal of toxic organic dyes from polluted textile effluents.

Cost-effective microwave-assisted hydrothermal rapid synthesis of analcime-activated carbon composite from coal gangue used for Pb2+ adsorption

Heavy metal contamination of water has brought about serious harm to the ecological environment and also threatens human health to a certain extent. In this study, a composite structure comprised of analcime-activated carbon (ANA-AC) was synthesized in situ via a microwave-assisted hydrothermal method using coal gangue (CG) for the potential treatment of Pb²⁺ from aqueous solution. The products were systematically characterized using XRD, SEM, BET, FTIR, and XPS. The results showed that activated carbon was successfully integrated with the structure of the analcime and the BET surface area of the ANA-AC (20.82 m²/g) was much greater than that of the CG (9.33 m²/g) and ANA (10.04 m²/g) independently. The relationship between Pb²⁺ adsorption capacity and the initial solution concentration, adsorbent dosages, contact time, pH, and temperature was studied. Under optimal conditions (Pb²⁺  = 100 mg/L, dosage = 0.1 g, contact time = 6 h, pH = 5.4-6, temperature = 298 K), the maximum adsorption capacity of ANA-AC can reach 100%, which was higher than that of CG and ANA. The Langmuir isotherm model was in good agreement with the data obtained for Pb²⁺ adsorption, and the pseudo-second-order kinetic model was more suitable for describing the experimental data, showing that chemical adsorption was the controlling step during the adsorption process. In summary, analcime-activated carbon composite prepared from coal gangue could be used as an appropriate adsorbent for Pb²⁺ adsorption from an aqueous solution.

Efficient remediation of Mn2+ and NH4+-N in co-contaminated water and soil by Acinetobacter sp. AL-6 synergized with grapefruit peel biochar: Performance and mechanism

Electrolysis manganese slag produced in industrial manganese production causes massive leachate containing heavy metal Mn²⁺ and inorganic NH₄⁺-N, which causes serious hazard to the water body and soil. A cost-effective alternative to address the multiple pollution is urgently needed. This study investigated the synergy of grapefruit peel biochar (BC) and strain AL-6 to remediate Mn²⁺ and NH₄⁺-N in sequencing batch bioreactor (SBR) and soil column. The results showed that, in SBR, under the condition of C/N 5, temperature 30°C, BC and strain AL-6 showed fabulous performance to remove Mn²⁺ (99.3%) and NH₄⁺-N (97.7%). The coexisting ions Mg²⁺ and Ca²⁺ had no effects on the removal of Mn²⁺ and COD, however, 23.3% removal efficiency of NH₄⁺-N was curtailed. Characterization found that the presence of MnCO₃ confirmed the adsorption of Mn²⁺ by functional groups action, and gas chromatography indicated that BC and strain AL-6 promoted the reduction of N₂O and organic carbon. In addition, BC and strain AL-6 helped to immobilize 799.41 mg L^-1 of Mn²⁺ and 320 mg L^-1 of NH₄⁺-N after 45 d in the soil column. And the determination of TOC, CEC, pH, Eh, soil enzymatic activity (catalase and urease), and microbial diversity and abundance confirmed that BC and strain AL-6 increased the soil fertility and bioavailability of pollutants. Totally, BC and strain AL-6 possess great potential to remediate Mn²⁺ and NH₄⁺-N pollution in water and soil.

Simultaneous oxidation of As(III) and reduction of Cr(VI) by NiS-CdS@biochar through efficient oxalate activation: The key role of enhanced generation of reactive oxygen species

The reutilization of exhausted biochar is attracting extensive interest among researchers. In this study, the biochar generated from Chinese fir with natural regular porous structure that adsorbed Cd²⁺/Ni²⁺ at different concentration levels was used as the precursor, and then combined with simple hydrothermal vulcanization and ion deposition to generate the p-n heterojunction between NiS and CdS compounds (NiS-CdS@C) in situ. The hybrids with 3 cycles of NiS deposition reduced the interfacial transmission resistance from 80 Ω to 40 Ω, and increased photocurrent density by 5 times, thus effectively promoting the separation of photogenerated electrons and holes. The simultaneous removal of As(III) and Cr(VI) was selected to evaluate the oxidation and reduction capacity of the visible light/NiS-CdS@C/oxalate system. The results indicated that 10 mg/L As(III) and Cr(VI) were completely and simultaneously removed with 0.75 mM oxalate addition within 40 min in the system, and the NiS-CdS@C presented good durability and stability for oxalate activation. Electron paramagnetic resonance (EPR) and quenching experiments demonstrated that oxalate was activated by holes under light to produce •CO₂^- and enhanced the generation of additional •OH and •O₂^-, further contributing to the oxidation of As(III) and reduction of Cr(VI).

Continuously applying compost for three years alleviated soil acidity and heavy metal bioavailability in a soil-asparagus lettuce system

Soil acidification and heavy metal pollution are two common barrier factors threatening plant growth and agro-product quality. Applying manure compost is promising to alleviate soil acidity, while it may increase heavy metal accumulation in soil. In a 3-year field experiment, compost was applied for 12 consecutive harvest seasons at 15, 30, and 45 t ha^-1 in a slightly acidic soil. Samples were taken at the twelfth season to examine the changes of soil properties, vegetable productivity, heavy metal accumulation and bioavailability in the soil-asparagus lettuce system. The results showed that the pH values of the topsoil were increased by 0.49-0.75 units in compost added soils compared with no compost control, soil organic matter (SOM) contents and cation exchange capacity (CEC) were increased by 34-101% and 43-44%, respectively. The soil nutrient contents were also increased in compost treatments. Continuously applying compost increased Cd, Cu, and Zn concentrations in topsoil by up to 32, 20, and 22% and decreased Pb by 10%, while soil available Cd and Zn concentrations were reduced by up to 54 and 86%, and available Cu was increased by 19-63%. The biomass of asparagus lettuce was increased by 30-59% in compost treatments, with Cd and Zn concentrations in the plant tissues reduced by 28-50% and 14-67%. Cu concentrations in the lettuce shoots were increased by 20-39%. The concentration factor and total uptake of Cd and Zn in lettuce were effectively reduced in compost treatments. Cd was more prone to be taken up, translocated and accumulated from soil to the lettuce plant than the other heavy metals. Continuously applying compost over 3 years increased soil pH, SOM, CEC, nutrient contents, and lettuce productivity, decreased Cd and Zn bioavailability in the soil-lettuce system, while posing a risk of increasing heavy metal accumulation in topsoil.

Trace Element Contents in Petrol-Contaminated Soil Following the Application of Compost and Mineral Materials

The global use of petroleum hydrocarbons as raw materials and an energy source in industry results in serious environmental, health, and ecological problems. Consequently, there is growing interest in the development of technologies for the rehabilitation of contaminated areas. This study was undertaken in order to determine the effect of different phytostabilising materials (compost, bentonite, and CaO) on the trace element content in soil contaminated with unleaded petroleum 95 (0, 2.5, 5, and 10 cm³ kg⁻¹ of soil). The doses of petroleum applied to the soil were based on the previously conducted preliminary experiment. The highest petroleum dose (10 cm³ kg⁻¹ of soil) significantly reduced the chromium, zinc, and cobalt contents in the soil. Petroleum increased the cadmium, lead, nickel, and copper contents in the soil. The materials used for phytostabilisation (compost, bentonite, calcium oxide) had a significant effect on the trace element content in the soil. The application of mineral materials (bentonite and calcium oxide) was more effective than the application of compost, compared to the control series (without soil amendments) as they reduced the contents of cadmium, chromium, nickel, and cobalt in the soil to the greatest extent. The reduction effect of bentonite and calcium oxide on the content of these trace elements in the soil was stronger than compost.

Investigation of the adsorption behavior of Pb(II) onto natural-aged microplastics as affected by salt ions

In this study, the adsorption behavior of Pb(II) on natural-aged and virgin microplastics in different electrolyte solutions was investigated. The results demonstrated that natural-aged microplastics exhibited higher adsorption capacity for Pb(II) compared to virgin ones, and the addition of CaCl₂ strongly inhibited the adsorption amount of Pb(II). The adsorption kinetics of Pb(II) adsorption were better fitted by the pseudo-second order model and Elovich equation, and were slowed down greatly at higher ionic strength. The rate-limiting steps of adsorption process were dominated by intra-particle diffusion. The adsorption isotherm of Pb(II) onto microplastics affected by salt ions can be well described by Freundlich model, the greater adsorption efficiency of natural-aged microplastics proved that adsorption process was multilayer and heterogeneous. In addition, pH significantly influenced the adsorption of Pb(II) due to the changes electrostatic interactions. The effect of fulvic acid in the electrolyte solutions was also revealed and attributed to the complexation with Na⁺ and Ca²⁺. Furthermore, the higher pH and ionic strength in different environmental water dramatically decreased adsorption capacity onto microplastics. Finally, it's confirmed that the adsorption mechanisms affected by salt ions mainly involve electrostatic interaction, surface complexation, and ionic exchange. These findings indicate that salt ions exert an important influence on the adsorption of heavy metals for MPs, which should be further concerned.

Synthesis of green nano sorbents for simultaneous preconcentration and recovery of heavy metals from water

The wastewater containing Cd, Co, Fe, Cu, Cr, Mn, Ni and Pb ions are as trace metal pollutants. Water pollution caused by increment in industrialization and overpopulation reveals a major threat to human health. Adsorption is recognized as the effective and optimum method to remove water contaminations. The amorphous and porous form of silicon dioxide is silica gel widely used as an adsorbent. It can absorb moisture with traces of the target heavy metal ions. This research elaborates a simplistic, and reliable preconcentration column method highly developed for the determination of Cd²⁺, Fe³⁺, Co²⁺, Cr³⁺, Cu²⁺, Mn²⁺, Pb²⁺ and Ni²⁺ ions in model solutions and real water samples by flame atomic absorption spectrometry (FAAS). The proposed operation depends on the retention of the target ions from buffered model solutions on a silica gel filled up a column modified with vanadium(V) oxide sorbent followed by their desorption. SiO₂/V₂O₅ is an efficient adsorbent due to its low cost, eco-friendly and high availability. The adsorbent morphological and interfacial physicochemical characterization was done using scanning electron microscopy, and Fourier transmission infrared spectroscopy, respectively. The 2.92 value achieved for the point of zero charges supports the experimentation for the heavy metal efficient adsorption. Quantitative recoveries were achieved at pH 10 with 50 mg of SiO₂/V₂O₅ mass and adsorption capacity ranged from 28.96 μmol/g (Pb) to 214.86 μmol/g (Fe) with 1114.79 μmol/g in total. Simultaneous preconcentration effect was determined by the interference cations on the sorbent. The LOD varies from 8.42 to 50.56 μg/L and LOQ is achieved from 20.06 to 72.41 μg/L of 15 blank solutions. The developed preconcentration procedure was adequately implemented for the simultaneous analysis of eight metallic ions content in local river samples. The developed vanadium(V) oxide incorporated with silica gel is practicable as an economical and effective adsorbent to eliminate metallic ions from a liquid solution.

Isolation of heavy metal-immobilizing and plant growth-promoting bacteria and their potential in reducing Cd and Pb uptake in water spinach

Heavy metal-immobilizing bacteria are normally capable of stabilizing metals and affecting their absorption by plants. However, few studies have elucidated the mechanisms employed by novel heavy metal-immobilizing and plant growth-promoting bacteria to immobilize Cd and Pb and reduce their uptake by vegetables. In this study, polyamine (PA)-producing strains were isolated and their effects on biomass and metal accumulation in water spinach (Ipomoea aquatica Forssk.) and the underlying mechanisms were investigated. Two PA-producing strains, Enterobacter bugandensis XY1 and Serratia marcescens X43, were isolated. Strains XY1 and X43 reduced the aqueous Cd and Pb levels (49%-52%) under 10 mg L^-1 Cd and 20 mg L^-1 Pb because of metal ion chelation by bacterially produced PAs and cell adsorption. Further evidence showed that Cd and Pb were bound and precipitated on the bacterial cell surface in the form of Cd(OH)₂, CdCO₃ and PbO. Compared with strain-free water spinach, greens inoculated with strains XY1 and X43 showed 51%-80% lower Cd and Pb contents. The rhizosphere soil pH and PA contents were significantly higher, and lower contents of the rhizosphere soil acid-soluble fractions of Cd (18%-39%) and Pb (31%-37%) were observed compared to the noninoculated control. Moreover, inoculation with XY1 reduced the diversity of the bacterial community, but the relative abundances of plant growth-promoting and PA-producing bacteria in rhizosphere soil were enriched, which enhanced water spinach resistance to Cd and Pb toxicity. Our findings describe novel heavy metal-immobilizing bacteria that could be used to improve the habitat of vegetables and reduce their uptake of heavy metals.

A comprehensive study on aquatic chemistry, health risk and remediation techniques of cadmium in groundwater

Cadmium (Cd), a non-essential trace element, it's intrusion in groundwater has ubiquitous implications on the environment and human health. This review is an approach to comprehensively emphasize on i) chemistry and occurrence of Cd in groundwater and its concomitant response on human health ii) sustainable Cd remediation techniques, iii) and associated costs. Current study is depending on meta-analysis of Cd contaminations in groundwater and discusses its distributions around the globe. Literature review primarily comprises from the last three decades online electronic published database, which mainly includes i) research literatures, ii) government reports. On the basis of meta-data, it was concluded that Cd mobility depends on multiple factors: such as pH, redox state, and ionic strength, dissolved organic (DOC) and inorganic carbon (DIC). A substantially high Cd concentration has been reported in Lagos, Nigeria (0.130 mg/L). In India, groundwater is continuing to be contaminated by Cd in the proximity of industrial, agricultural areas, high concentrations (>8.20 mg/L) were reported in Tamil Nadu and Maharashtra. Depending on chemical behavior and ionic radius cadmium disseminate into the food chain and ultimately cause health hazard that can be measured by various index-based assessment tools. Instead of chemical adsorbents, nanoparticles, phytoextraction, and bioremediation techniques can be very useful in the remediation and management of Cd polluted groundwater at a low-cost. For Cd pollution, the development of a comprehensive framework that links the hydro-geological, bio-geochemical processes to public health is important and need to be further studied.

Iron-based materials for simultaneous removal of heavy metal(loid)s and emerging organic contaminants from the aquatic environment: Recent advances and perspectives

The existence of heavy metals and emerging organic contaminants in wastewater produces serious toxic residues to the environment. Developing cheap and efficient materials to remove these persistent pollutants is crucial. Iron-based materials are cost-effective and environmentally friendly catalysts, and their applications in the environmental field deserve attention. This paper critically reviewed the removal mechanisms of heavy metals and emerging organic pollutants by different influencing factors. The removal of pollutants (heavy metals and emerging organic pollutants) in a multi-component system was analyzed in detail. The mechanisms of synergism, antagonism and non-interference were discussed. This paper had a certain reference value for the research of wastewater remediation technology which could simultaneously remove various pollutants by iron-based materials.

Removal of Copper(II) in the Presence of Sodium Dodecylobenzene Sulfonate from Acidic Effluents Using Adsorption on Ion Exchangers and Micellar-Enhanced Ultrafiltration Methods

The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the systems containing Cu(II) in the presence of ABSNa50 surfactant compared to the other adsorbents (removal efficiency ≈ 100%, sorption capacity ≈ 10 mg/g). The kinetics followed the pseudo-second order kinetic equation. The Langmuir adsorption capacities were 110 mg/g (the system with ABSNa50 above CMC) and 130.38 mg/g (the system with ABSNa50 below CMC). The working ion exchange capacities were Cw = 0.0216 g/mL and Cw = 0.0135 g/mL. The copper removal by the micellar-enhanced ultrafiltration method was 76.46% (0.1 mol/L HCl).

Synthesis of graphene oxide/polyethyleneimine sponge and its performance in the sustainable removal of Cu(II) from water

Modification of graphene oxide (GO) with polyethyleneimine (PEI) has been studied to develop a GO/PEI sponge material that not only performs well in the adsorption of Cu(II) but also is easily separated from water. The results showed that GO had excellent affinity for PEI, and GO/PEI prepared at pH 9.0 using PEI with a MW of 70,000 was shown to be a good adsorbent for Cu(II). This GO/PEI was characterized with SEM, XRD, XPS, FTIR and TG analyses and was investigated for Cu(II) adsorption further. The adsorption isotherm data of Cu(II) were fitted well with the Langmuir model, from which the maximum adsorption of GO/PEI was calculated to be 150.9 mg/g at pH 5.5. This was much higher than that of GO and two commercial resins. GO/PEI showed high selectivity towards Cu(II). In GO/PEI, the contributions of amino groups on PEI and negative charges on GO were 79.2% and 20.8%, respectively. Cu(II) adsorption on GO/PEI decreased with decreasing pH, and 1 M HCl caused nearly complete desorption of the adsorbed Cu(II). Experimental results of five cycles of adsorption-desorption indicated that this material could be reused. Column studies showed that GO/PEI performed well in terms of both Cu(II) adsorption and stability in water.

Microplastics as a vehicle of heavy metals in aquatic environments: A review of adsorption factors, mechanisms, and biological effects

Microplastics (MPs) have recently attracted much attention due to their widespread distribution in the aquatic environment. Microplastics can act as a vector of heavy metals in the aquatic environment, causing a potential threat to aquatic organisms and human health. This review mainly summarized the occurrence of microplastics in the aquatic environment and their interaction with heavy metals. Then, we considered the adsorption mechanisms of MPs and heavy metals, and further critically discussed the effects of microplastics properties and environmental factors (e.g., pH, DOM, and salinity) on the adsorption of heavy metals. Finally, the potential risks of combined exposure of MPs and heavy metals to aquatic biota were briefly evaluated. This work aims to provide a theoretical summary of the interaction between MPs and heavy metals, and is expected to serve as a reference for the accurate assessment of their potential risks in future studies.

A Review on Promising Membrane Technology Approaches for Heavy Metal Removal from Water and Wastewater to Solve Water Crisis

Due to the impacts of water scarcity, the world is looking at all possible solutions for decreasing the over-exploitation of finite freshwater resources. Wastewater is one of the most reliable and accessible water supplies. As the population expands, so do industrial, agricultural, and household operations in order to meet man’s enormous demands. These operations generate huge amounts of wastewater, which may be recovered and used for a variety of reasons. Conventional wastewater treatment techniques have had some success in treating effluents for discharge throughout the years. However, advances in wastewater treatment techniques are required to make treated wastewater suitable for industrial, agricultural, and household use. Diverse techniques for removing heavy metal ions from various water and wastewater sources have been described. These treatments can be categorized as adsorption, membrane, chemical, or electric. Membrane technology has been developed as a popular alternative for recovering and reusing water from various water and wastewater sources. This study integrates useful membrane technology techniques for water and wastewater treatment containing heavy metals, with the objective of establishing a low-cost, high-efficiency method as well as ideal production conditions: low-cost, high-efficiency selective membranes, and maximum flexibility and selectivity. Future studies should concentrate on eco-friendly, cost-effective, and long-term materials and procedures.

Hydrothermally synthesized titanate nanomaterials for the removal of heavy metals and radionuclides from water: A review

Hazardous heavy metals and radionuclides in water and wastewater are of drastic concern owing to their detrimental impacts on the organisms as well as the circumambient ecosystem. To remove them as much as we can, both technique and materials were studied in the past years. The adsorption technique as superior water remediation method with the simplicity of design, environmental friendliness and high efficiency was well established. Consequently, it is practically important to explore advanced and economically feasible absorbents for removing these poisonous pollutants from aqueous solutions. So far, large numbers of experiments proved hydrothermally synthesized titanate nanomaterials (TNMs) could be a prospectively excellent adsorbent extracting heavy metals and radionuclides from water due to the high specific surface area, tunable pore size, abundant surface active sites, favorable hydrophilic properties. The objective of this work is to give an overview of hydrothermal synthesis, adsorption performance of TNMs for heavy metals and radionuclides, as well as the various influencing factors for water purification. It comprehensively reviews the structural changes and regenerability of TNMs after adsorption, and different modification methods adopted for improving removal capacity. Additionally, it uniquely highlights the efficient decontamination of the pollutants through a synergistic effect of adsorption and photocatalysis by TNMs. This review provides detailed information for the development, application, and research challenges faced by hydrothermally synthesized TNMs for the removal of heavy metals and radionuclides from aqueous solutions, which will serve as a reference guide for scientists in related fields.

The thermodynamic stability, potential toxicity, and speciation of metals and metalloids in Tehran runoff, Iran

Surface runoff is the most significant source of water in dry cities like Tehran. The surface runoff is polluted by heavy metals, which their risk level is a function of their speciation. Herein, Tehran runoff quality and the speciation of metals and metalloids were investigated. The results of quality showed that oxidation-reduction potential (Eh) and pH ranged from + 186 to + 230 mV and from 7.31 to 10.29, respectively. Cluster analysis indicated that Cr, Si, Mn, Fe, Pb, Se, Th, Ba, Ni, Li, and Sr had similar behaviors and origins, and salinity played an active role in restricting their concentrations. Eh and dissolved oxygen (DO) negatively affected the concentrations of all the studied elements. The speciation model (according to HSC Chemistry program) exhibited that all the studied elements are stable; however, in two cases, they would become unstable (pH < 7, Eh <  - 480 mV or Eh > 1100 mV) and (pH > 10, Eh <  - 570 mV or Eh > 970 mV). Also, Ba, Cd, Li, Mn, Al, As, Sr, Cr, Si, and Se are present in bioavailable species and As and Cd in the runoff exist in high toxic oxidation states of + 3 and + 2, respectively. The linear regression of Cu, Co, Cd, Zn, and As with Eh provided a good fit, and all of these metals were significant at levels 1 and 5%. Finally, it is recommended to continuously monitor the Eh-pH changes for investigating the potential toxicity of metals and predicting the metal pollution by regression equations in any other stations.

Development of an acidized biochar-supported hydrated Fe(III) oxides for highly efficient cadmium and copper sequestration from water

Biochar-supported metallic oxides are attractive adsorbents for heavy metal cleanup, but the adsorption performance is still unsatisfactory as a result of the self-aggregation of the incorporated metallic oxides. A new hybrid nano-material was prepared through impregnating hydrated ferric oxide (HFO) nanoparticles within biochar bearing high-density charged oxygen-containing groups (e.g., carboxyl and hydroxyl groups) (ABC) derived from HNO₃ treatment. The as-made adsorbent, denoted as HFO-ABC, possesses highly dispersed HFO nanoparticles with typical size lower than 20 nm, and exhibits greater sorption capacity for Cd(II) and Cu(II) than the pristine biochar-supported HFO. It also shows great sorption preference toward Cd(II) and Cu(II) in co-presence of high levels of Ca²⁺, Mg²⁺ and humic acid (HA). Such prominent performance is put down to the high-density charged functional groups on the host ABC, which not only promote the dispersion of the immobilized HFO nanoparticles but also generate the potential Donnan membrane effect, i.e., the pre-concentration and permeation of target metals prior to their preferable adsorption by nano-HFO. The predicted effective coefficients of intra-particle diffusion for Cu(II) and Cd(II) are 3.83 × 10^-9 and 4.33 × 10^-9 cm²/s, respectively. HFO-ABC exhibits excellent performance for fixed-bed column application, and yields 513 and 990 BV effluents for Cd(II) and Cu(II) to achieve their discharge standards, respectively. The spent HFO-ABC could be in situ regenerated using binary HCl-CaCl₂ solution with desorption efficiency higher than 95%. All results manifest that increasing charged functional groups via HNO₃ treatment is an effective measure for boosting sorption performance of biochar-based nanocomposites.

Multiple adsorption systems and electron-scale insights into the high efficiency coadsorption of a novel assembled cellulose via experiments and DFT calculations

In view of the characteristics of heavy metal and antibiotic compound pollution in the Pearl River Basin in Guangzhou. More scientifically modified cellulose, named HVUC, is characterized by multiple hydrophilic groups, long chains and large space and displays highly efficient adsorption of both Cd and sulfamethoxazole (SMZ) and good adaptability in a wide pH range and at high ion strength. Furthermore, the coadsorption mechanism was elaborated from multiple angles. Multiple adsorption experiments explained the competition and synergy effect in the adsorption process. The electrostatic potential maps indicated that HVUC had advantageous adsorption sites for both Cd and SMZ and that electrostatic interactions had the greatest impact on the adsorption of Cd and SMZ. The electron density and differential charge density images proved that Cd more easily overlapped electron clouds and transferred electrons with HVUC and that SMZ^- and could act as a bridge for SMZ^-. The equilibrium configuration indicated that the formation of Cd-SMZ^- complexes led to the bending and folding of SMZ^-, which was not conducive to overall adsorption when SMZ^- was close to HVUC and could lead to the release of SMZ^- when Cd was close to HVUC, which confirmed the proposed mechanism of complexation-decomplexation-complexation.

Fabrication of Fe3O4/ZIF-8 nanocomposite for simultaneous removal of copper and arsenic from water/soil/swine urine

In this study, a magnetic nanocomposite (denoted as FZ) was fabricated using Fe₃O₄and zeolitic imidazolate framework-8 (ZIF-8), based on a coprecipitation method. FZ could efficiently remove Cu²⁺(Cu(II)) and AsO₂^- (As(III)) ions simultaneously from water, soil, and swine urine samples through hydrogen bonding and electrostatic interactions. The Cu(II) and As(III) removal efficiencies of the optimal FZ sample increased gradually with time and reached 99.1% and 98.4%, respectively, in 180 min. The maximum adsorption capacities of FZ4 for Cu(II) and As(III) were determined to be 33.48 mg/g and 21.12 mg/g, respectively. Additionally, the FZ with a high saturation magnetization (49.8 emu/g) was easily recovered from aqueous solutions and soil samples. Furthermore, zebrafish experiments indicated that FZ possessed a high biosafety. Thus, this study introduces a promising method for treating water, soil, and swine urine samples contaminated with Cu(II) and As(III), and verifies that FZ is suitable for practical application.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Pressure-Driven Membrane Process: A Review of Advanced Technique for Heavy Metals Remediation

Pressure-driven processes have come a long way since they were introduced. These processes, namely Ultra-Filtration (UF), Nano-Filtration (NF), and Reverse-Osmosis (RO), aim to enhance the efficiency of wastewater treatment, thereby aiming at a cleaner production. Membranes may be polymeric, ceramic, metallic, or organo-mineral, and the filtration techniques differ in pore size from dense to porous membrane. The applied pressure varies according to the method used. These are being utilized in many exciting applications in, for example, the food industry, the pharmaceutical industry, and wastewater treatment. This paper attempts to comprehensively review the principle behind the different pressure-driven membrane technologies and their use in the removal of heavy metals from wastewater. The transport mechanism has been elaborated, which helps in the predictive modeling of the membrane system. Fouling of the membrane is perhaps the only barrier to the emergence of membrane technology and its full acceptance. However, with the use of innovative techniques of fabrication, this can be overcome. This review is concluded with perspective recommendations that can be incorporated by researchers worldwide as a new problem statement for their work.

Spatial distribution and ecological assessment of nickel in sediments of a typical small plateau lake from Yunnan Province, China

Nickel (Ni) in small plateau lake sediments plays an important role in influencing the quality of lake ecosystems with a high degree of endemism and toxicity. This paper focuses on the spatial distribution and ecological risks of nickel in the sediments of Jianhu Lake, a small plateau lake in China, and the influence of pH and total organic carbon (TOC) on nickel concentrations. The results showed that average total nickel concentrations were 138.99 ± 57.57 mg/kg (n = 38) and 184.31 ± 92.12 mg/kg (n = 60) in surface sediments (0-10 cm top layer) and sediment cores (0-75 cm depth), respectively, and that the residual fraction was the main form of nickel. Simultaneously, through a semivariogram model, strong spatial dependence among pH, TOC, and the oxidizable fraction was revealed, whereas total nickel, exchangeable and the weak acid soluble fraction, reducible fraction, and residual fraction showed moderate spatial dependence. The vertical distribution revealed that nickel accumulated mainly in the bottom 5 cm (70-75 cm) of the sediment layer and that the pH was higher there, whereas TOC was concentrated mainly in the top 5 cm of sediment. Using geoaccumulation and a potential ecological risk index, moderate nickel pollution and moderate risk levels were found in most surface sediments, but moderate nickel pollution and high risk levels were observed in most sediment cores. In addition, pH and TOC were found to have a strong effect on the distribution and concentration of nickel and its fractions in the small plateau lake. In summary, nickel posed a certain degree of pollution and ecological risk, which deserves attention in the sediments of small plateau lakes.

Facile synthesis of economical feasible fly ash-based zeolite-supported nano zerovalent iron and nickel bimetallic composite for the potential removal of heavy metals from industrial effluents

Heavy metals contamination of water is one of the environmental issue globally. Thus prepared fly ash-based zeolite (FZA)-supported nano zerovalent iron and nickel (nZVI/Ni@FZA) bimetallic composite from low-cost fly ash waste for the potential treatment of anion (Cr(VI) and cation Cu(II)) heavy metals from industrial effluents at pH 3 and 5, respectively in this study. The systematic interaction between FZA and nZVI/Ni and the adsorptive removal mechanism was studied. The mean surface area of the nZVI/Ni@FZA (154.11 m²/g) was much greater than that of the FZA (46.6 m²/g) and nZVI (4.76 m²/g) independently, as determined by BET-N₂ measurements. The effect of influence factors on the removal of Cr(VI) and Cu(II) by nZVI/Ni@FZA, such as pH effect, initial concentration effect, time effect, temperature effect, coexisting metals, and ionic strength, and cumulative loading ability, were discussed. The maximum adsorption capacity of nZVI/Ni@FZA was 48.31 mg/g and 147.06 mg/g towards Cr(VI) and Cu(II), respectively. These were higher than those of nZVI@FZA and FZA. It demonstrated that Ni could play an important role in enhancing the reduction ability of nZVI. Furthermore, isothermal and kinetic results revealed that both heavy metal adsorption processes were rate limiting monolayer Langmuir adsorption on homogeneous surfaces. Thermodynamic results suggested that the adsorptive removal of metal ions was endothermic with spontaneity. The applicability of nZVI/Ni@FZA on real industrial wastewater treatment results demonstrate that the concentration of heavy metals were removed under the acceptable standard levels. Further the adsorption capacity of nZVI/Ni@FZA was higher than the nZVI@FZA and FZA. The overall results demonstrated that nZVI/Ni@FZA was a promising, efficient, and economically feasible sorbent for potential wastewater treatment. Moreover this is first report on the preparation nZVI/Ni@FZA bimetallic composite.

Magnetic nanostructures functionalized with a derived lysine coating applied to simultaneously remove heavy metal pollutants from environmental systems

The pollution of environmental systems with heavy metals is becoming a serious problem worldwide. These contaminants are one of the main issues in sludge (which is considered waste) and can even have harmful effects if the sludge is not treated properly. Thus, the development of a novel functional magnetic nanoadsorbent based on a derived lysine is reported here, which can be efficiently applied for metal removal from sludge. Magnetic nanoparticles were coated with silica layer and further modified by covalent bonding of derived lysine. The morphology of the nanomaterial, its nano-size and the silica layer thickness were analyzed by transmission electron microscopy. The successful silanization of the lysine derivative to the silica-coated magnetic nanostructures was investigated by several physicochemical characterization techniques, while the magnetic properties were measured with a vibrating sample magnetometer. The synthesized nanostructures were used as adsorbents for simultaneous removal of most critical heavy metals (Cr, Zn, Cu) from real complex sludge suspensions. The main practical adsorption parameters, pH of the native stabilized sludge, adsorbent amount, time, and adsorbent regeneration were investigated. The results show promising adsorption properties among currently available adsorbents (the total equilibrium adsorption capacity was 24.5 mg/g) from the sludge with satisfactory nanoadsorbent reusability and its rapid removal. The stability of the nanoadsorbent in the sludge, an important but often neglected practical parameter for efficient removal, was verified. This work opens up new possibilities for the development of high-quality magnetic nanoadsorbents for metal pollutants applied in various complicated environmental fields and enables waste recovery.

Solution pH affects single, sequential and binary systems of sulfamethoxazole and cadmium adsorption by self-assembled cellulose: Promotion or inhibition?

A new self-assembled cellulose (SACS) containing multi-functional amine, carboxyl and hydroxyl groups was successfully obtained through etherification, cross-linking and grafting processes. Then, the adsorption of sulfamethoxazole (SMZ) and Cd(II) onto SACS at pH values of 3, 5.7 and 7.5 was systematically investigated by batch experiments of single, sequential and binary systems, characterization and density functional theory (DFT) calculations. The presence of Cd(II) decreased the adsorption of SMZ because of hydrophilic site competition, while SMZ inversely increased the adsorption of Cd(II), which was attributed to bridging and especially to electrostatic shielding effects; moreover, both the inhibitory and synergistic effects were more obvious in the binary system and at a pH of 7.5. There was a dynamic balance between the inhibitory and synergistic effects that depended on the system, pH value and concentration ratio. DFT results further indicated that SMZ^- more easily coordinated with Cd(II) at sulfonyl oxygen and nitrogen sites, and the cationic bridge of Cd(II) with SMZ^- mainly occurred in the sequential system. Moreover, a complexation-decomplexation-complexation balance of SMZ^- and Cd(II) probably occurred in the binary system.