Recent advances in the application of water-stable metal-organic frameworks: Adsorption and photocatalytic reduction of heavy metal in water

Recent Advances of Carbon Capture in Metal-Organic Frameworks: A Comprehensive Review

The excessive emission of greenhouse gases, which leads to global warming and alarms the world, has triggered a global campaign for carbon neutrality. Carbon capture and sequestration (CCS) technology has aroused wide research interest as a versatile emission mitigation technology. Metal-organic frameworks (MOFs), as a new class of high-performance adsorbents, hold great potential for CO2 capture from large point sources and ambient air due to their ultra-high specific surface area as well as pore structure. In recent years, MOFs have made great progress in the field of CO2 capture and separation, and have published a number of important results, which have greatly promoted the development of MOF materials for practical carbon capture applications. This review summarizes the most recent advanced research on MOF materials for carbon capture in various application scenarios over the past six years. The strategies for enhancing CO2 selective adsorption and separation of MOFs are described in detail, along with the development of MOF-based composites. Moreover, this review also systematically summarizes the highly concerned issues of MOF materials in practical applications of carbon capture. Finally, future research on CO2 capture by MOF materials is prospected.

Effect of two-fold single-atom substitutions (S, Se; C, N) in band gap engineered donor-acceptor conjugated microporous polymers on the efficient aerobic photooxidation of aryl sulfides

Substitution of a single atom in a photoactive system is capable of vastly altering its optoelectronic properties leading to the generation of an efficient photocatalyst. In this study, we explore the impact of two-fold single-atom substitutions on the optoelectronic properties and photocatalytic performance of donor-acceptor type conjugated microporous polymers (D-A CMPs). For this, three isostructural triphenylamine (TPA)-based D-A CMPs were synthesized namely PTPA-BT, PTPA-BS, and PTPA-PS containing 2,1,3-benzothiadiazole, 2,1,3-benzoselenadiazole and [1,2,5]selenadiazolo[3,4-c]pyridine as the acceptor moieties, respectively. Firstly, PTPA-BT and PTPA-BS were synthesized using the S to Se single-atom substitution strategy, followed by the synthesis of PTPA-PS employing a second C to N single-atom substitution. The effect of single-atom substitution demonstrated drastic changes in their band gap, conductivity, and charge carrier dynamics, which in turn impacted their photocatalytic activity, although the change in their porosity was not much pronounced. In terms of photocatalytic detoxification of sulfur mustards, the activities of D-A CMPs follow the trend: PTPA-BS > PTPA-PS > PTPA-BT. In comparison with PTPA-BT (containing C, S) and PTPA-PS (containing N, Se), PTPA-BS (containing C, Se) exhibits a higher photocatalytic activity towards the photooxidation of thioanisole with >99% conversion and ∼93% isolated yield under visible-light illumination, which is attributed to its lower interfacial charge transfer resistance, stronger photocurrent response, optimal band gap and higher activity to generate superoxide anion radicals. Therefore, the two-fold single-atom substitution strategy is crucial for optimizing D-A CMPs for the photocatalytic oxidation of aryl sulfides. This approach allows fine-tuning of the optoelectronic properties to enhance photocatalytic efficiency and performance.

pH-Responsive Alginate/Chitosan Gel Films: An Alternative for Removing Cadmium and Lead from Water

Biosorption, a non-expensive and easy method for removing potentially toxic metal ions from water, has been the subject of extensive research. In this context, this study introduces a novel approach using sodium alginate and chitosan, versatile biopolymers that have shown excellent results as biosorbents. The challenge of maintaining high efficiencies and reuse is addressed by developing alginate/chitosan-based films. These films, prepared using solvent casting and crosslinking methods, form a hydrogel network. The alginate/chitosan-based films, obtained using the eco-friendly polyelectrolyte complex method, were characterized by FTIR, SEM, TGA, and DSC. The study of their swelling pH response, adsorption, and desorption behavior revealed promising results. The adsorption of Pb was significantly enhanced by the presence of both biopolymers (98%) in a shorter time (15 min) at pH = 6.5. The adsorption of both ions followed a pseudo-second-order kinetic and the Langmuir isotherm model. The desorption efficiencies for Cd and Pb were 98.8% and 77.6% after five adsorption/desorption cycles, respectively. In conclusion, the alginate/chitosan-based films present a highly effective and novel approach for removing Cd and Pb from water, with a promising potential for reuse, demonstrating their strong potential in potentially toxic metal removal.

Application of waste eggshells elevates phytoremediation efficiency of Pb-Zn mine-contaminated farmland and mitigates soil greenhouse gas emissions: A field study

Remediating heavy metal (HM)-contaminated farmlands and sequestering soil carbon for emission reduction have been prominent topics in environmental research in recent years. However, few studies have looked into the soil greenhouse gas (GHG) impacts of growing hyperaccumulators in composite HM-contaminated farmland, as well as agronomic measures to remediate soil HMs while mitigating GHG emissions. To investigate fertilization measures to improve phytoremediation efficiency and mitigate GHG emissions, S. photeinocarpum was planted with three different fertilization measures on farmland contaminated by lead-zinc (Pb-Zn) mines (1200 kg ha-1 eggshell, 125 kg ha-1 28-homobrassinolide, and 16.7 kg ha-1 mineral potassium fulvic acid) during its growth period. The findings are as follows: Eggshell application significantly enhanced the translocation factor (TF) of Pb, Zn, and cadmium (Cd) from the roots to the shoots of Solanum photeinocarpum. Moreover, eggshells notably increased the bioaccumulation factor (BCF) of Cd and Pb in plant shoots by 120.75% and 159.09%, respectively. Regarding GHG emissions, the combined application of eggshells and 28-homobrassinolide substantially lowered the global warming potential (GWP) of the soil. Correlation analyses revealed that eggshell application increased the relative abundance of the Gemmatimonadota bacterial phylum in the soil, facilitating Pb and Cd migration from the roots to shoot tissues in S. photeinocarpum. Eggshell use inhibited nitrate nitrogen (NO3--N) transformation into nitrous oxide (N2O) by the Myxococcota bacterial phylum and reduced N2O release from the soil. The application of low-cost eggshells can achieve a win-win situation of soil HM remediation and GHG emission reduction, as well as provide simple and scalable management measures for HM-contaminated farmland.

Advancements in nanoparticle-modified zeolites for sustainable water treatment: An interdisciplinary review

The contamination of water sources with heavy metals, dyes, and other pollutants poses significant challenges to environmental sustainability and public health. Traditional water treatment methods often exhibit limitations in effectively addressing these complex contaminants. In response, recent developments in nanotechnology have catalyzed the exploration of novel materials for water remediation, with nanoparticle-doped zeolites emerging as a promising solution. This comprehensive review synthesizes current literature on the integration of nanoparticles into zeolite frameworks for enhanced contaminant removal in water treatment applications. We delve into synthesis methodologies, elucidate mechanistic insights, and evaluate the efficacy of nanoparticle-doped zeolites in targeting specific pollutants, while also assessing considerations of material stability and environmental impact. The review underscores the superior adsorptive and catalytic properties of nanoparticle-doped zeolites, owing to their high surface area, tailored porosity, and enhanced ion-exchange capabilities. Furthermore, we highlight recent advancements in heavy metal and organic pollutant uptake facilitated by these materials. Additionally, we explore the catalytic degradation of contaminants through advanced oxidation processes, demonstrating the multifunctionality of nanoparticle-doped zeolites in water treatment. By providing a comprehensive analysis of existing research, this review aims to guide future developments in the field, promoting the sustainable utilization of nanoparticle-doped zeolites as efficient and versatile materials for water remediation endeavors.

Cellulose Acetate Supported MOF-5/Crystalline Nanocellulose Composite Film as an Adsorbent Material for Methylene Blue Removal from Aqueous Solutions

In this study, a novel, low-cost, and efficient adsorbent film was fabricated by a solvothermal method. The adsorbent film was developed to be hydrolytically stable, not vulnerable to aggregation in aqueous environments, and not prone to secondary contamination. The adsorbent consists of cellulose acetate (CA) as a support embedded with a MOF-5/crystalline nanocellulose (CNC) composite material. The CA-supported MOF-5/CNC film was characterized using a variety of techniques, including X-ray diffraction, thermal gravimetric analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy, which revealed hydroxyl and carbonyl functional groups on the adsorbent film. The film was evaluated for the adsorptive removal of methylene blue (MB) from an aqueous solution. Adsorption was characterized by a rapid increase in MB adsorption during the first hour with equilibrium achieved within 4-5 h into the adsorption process. The maximum adsorption capacity was determined to be 4.29 mg/g and the maximum dye removal efficiency was 77%. The MB adsorption process best fitted the Freundlich isotherm and pseudo-second-order kinetic models. Thermodynamic studies showed that the adsorption was exothermic and feasible. The adsorbent film showed admirable regeneration ability, demonstrating its cost-effectiveness and its potential as a promising material for wastewater treatment.

A novel bio-based fluorescent N, P-CDs@CMC/PEI composite hydrogel for sensitive detection and efficient capture of toxic heavy metal ions

To address the serious environmental pollution problems of toxic heavy metal ions in water bodies, a novel fluorescent composite hydrogel N, P-CDs@CMC/PEI with a bio-based polymer matrix of carboxylmethyl cellulose (CMC), polyethylenimine (PEI) as a second interpenetrating network and N, P-doped carbon dots (N, P-CDs) as a fluorescent probe was prepared for simultaneous detection and capture of HMIs by a facile and simple one-step approach. The morphology, chemical structure, swelling ratio, mechanical strength and fluorescence property of these composite hydrogels were studied through varied characterization methods. The composite hydrogel showed sensitive and selective fluorescence response with Hg(II) and Fe(III) and the according LOD values were 0.48 and 0.27 mg L-1, respectively. The relationship between the types of the adsorbent, pH value, HMIs concentration and temperature on the adsorption capacity of these composite hydrogels were studied. The pseudo-second-order model and Langmuir model were applicable to explain the adsorption process of CPH2 for Hg(II) and Cr(VI). The maximum calculated adsorption capacities for the above targeted HMIs by Langmuir model were 846.7 and 289.5 mg g-1, respectively. Coexisting inorganic salts and organic acids in low concentration had little effects on Hg(II) and Cr(VI) removal and the composite hydrogel showed good recyclability and stability for Hg(II) and Cr(VI) removal after four cycles. The electrostatic attraction and coordination covalent bonds were responsible for the adsorption process.

Derivatives of Br-doped metal-organic framework for improved acetaldehyde adsorption-photocatalytic oxidation

Different Br-doped metal-organic frameworks (MOFs) derived (Brx@UiO-66) have been prepared by heat treatment using UiO-66 as the precursor. The experimental results showed that Br0.2@UiO-66 exhibited the best photocatalytic oxidation and adsorption performances toward acetaldehyde. In the dynamic system, the acetaldehyde removal rate and adsorption capacity of Br0.2@UiO-66 were 93.2 % and 230.59 mg/g, respectively. The improvement of the photocatalytic performance can be attributed to the presence of Br ions and CBr bonds, which facilitated the rapid separation of electrons and holes and the production of •O2-. In addition, Br0.2@UiO-66 had a better adsorption performance than 300UiO-66, mainly because of the increased Lewis acidity of the metal active sites due to Br doping. Radical capture experiments indicated that •O2- and e- were the primary active substances in acetaldehyde oxidation, and allowed establishing the possible mechanism of acetaldehyde oxidation. This work shows that MOFs can have high catalytic oxidation performances toward volatile organic compounds (VOCs) while retaining their adsorption capacity, and can be used for practical applications in the adsorption-catalytic integrated degradation of VOCs.

Adding carbon sources to the substrates enhances Cr and Ni removal and mitigates greenhouse gas emissions in constructed wetlands

Constructed wetlands for wastewater treatment pose challenges related to long-term operational efficiency and greenhouse gas emissions on a global scale. This study investigated the impact of adding peat, humic acid, and biochar into the substrates of constructed wetlands and focused on Cr, and Ni removal, greenhouse gas emissions, and microbial communities in constructed wetlands. Biochar addition treatment achieved the highest removal efficiencies for total Cr (99.96%), Cr (VI) (100%), and total Ni (91.04%). Humic acid and biochar addition both significantly increased the heavy metal content in wetland plant Leersia hexandra and substrates of constructed wetlands. Further analysis of microbial community proportions by high-throughput sequencing revealed that biochar and humic acid treatments enhanced Cr and Ni removal efficiency by increasing the abundance of Bacteroidetes, Geobacter and Ascomycota. Humic acid addition treatment reduced CO2 emissions by decreasing the abundance of Bacteroidetes and increasing that of Basidiomycota. Peat treatment decreased CH4 emissions by reducing the abundance of the Bacteroidetes. Biochar treatment increased the abundance of the Firmicutes, Bacteroidetes, Proteobacteria as well as Basidiomycota, resulting in reduced N2O emissions. Biochar and humic acid treatments efficiently removed heavy metals from wastewater and mitigated greenhouse gas emissions in constructed wetlands by modifying the microbial communities.

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Hybrid organic frameworks: Synthesis strategies and applications in photocatalytic wastewater treatment - A review

Hybrid organic framework materials are a class of hierarchical porous crystalline materials that have emerged in recent years, composed of three types of porous crystal materials, namely metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and hydrogen-bonded organic frameworks (HOFs). The combination of various organic framework properties in hybrid organic frameworks generates synergistic effects, which has attracted widespread attention from researchers. The synthesis methods of hybrid organic frameworks are also an intriguing topic, enabling the formation of core-shell heterostructures through epitaxial growth, template conversion, medium growth, or direct combination. These hybrid organic framework materials have demonstrated remarkable performance in the application of photocatalytic wastewater purification and have developed various forms of applications. This article reviews the preparation principles and methods of various hybrid organic frameworks and provides a detailed overview of the research progress of photocatalytic water purification hybrid organic frameworks. Finally, the challenges and development prospects of hybrid organic framework synthesis and their application in water purification are briefly discussed.

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

Bio-based nanocomposite hydrogels derived from poly (glycerol tartrate) and cellulose: Thermally stable and green adsorbents for efficient adsorption of heavy metals

The eco-friendly polymeric nanocomposite hydrogels were prepared by incorporating dendritic fibrous nanosilica (DFNS) and apple peel (AP) as reinforcements into the crosslinked polymer produced by cellulose (CL) and poly (glycerol tartrate) (TAGL) via gelation method and used for efficient adsorption of Pb2+, Co2+, Ni2+, and Cu2+ metal ions. DFNS and DFNS/TAGL-CL/AP samples were characterized by FESEM, FTIR, TEM, TGA, and nitrogen adsorption/desorption methods. The results of TGA analysis showed that the thermal stability of the prepared hydrogels improved significantly in the presence of DFNS. Both synthetic and environmental parameters were investigated and the adsorption capacity reached 560.2 (pH = 4) and 473.12 (pH = 5) mg/g for Pb2+ and Cu2+ respectively, using initial ion concentration of 200 mg/L. Also, the maximum adsorption capacity was 340.9, and 350.3 mg/g for Co2+ and Ni2+, respectively under optimum conditions (pH = 6, initial ion concentration of 100 mg/L). These experiments indicated that the DFNS/TAGL-CL/AP nanocomposite hydrogel has an excellent performance in removal of Pb2+ and can adsorb this toxic metal in only 30 min while the optimum contact time for other metals was 60 min. Pseudo-second-order and Langmuir models were used to define the kinetic and adsorption isotherms, respectively and thermodynamic studies demonstrated that the adsorption was endothermic for Co2+, Ni2+ and Cu2+, exothermic for Pb2+, and spontaneous in nature for all metal ions. Furthermore, the reusability tests indicated that the hydrogels could maintain up to 93% of their initial adsorption capacity for all metal ions after four cycles. Therefore, the prepared nanocomposite hydrogels can be suggested as efficient adsorbents to remove the toxic metals from wastewater.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

An eco-friendly composite hydrogel based on covalently crosslinked cellulose/poly (glycerol citrate) for thallium (Ι) removal from aqueous solutions

Cellulose/poly (glycerol citrate) reinforced with thiol-rich polyhedral oligomeric silsesquioxane and apple peel (POSS-SH@CAG-CEL/AP) was synthesized using gelation method in the presence of glutaraldehyde as a crosslinker agent and used as an efficient composite hydrogel for elimination of Tl(Ι) from aqueous solutions. This composite hydrogel and synthesized thiol-rich polyhedral oligomeric silsesquioxane were characterized by elemental analysis, FT-IR, NMR, TGA, and FE-SEM techniques. The effects of synthetic and environmental parameters on the adsorption capacity of the composite hydrogel were investigated and it was found that thiol-rich polyhedral oligomeric silsesquioxane has improved the hydrogel properties including the Tl(Ι) uptake and the thermal stability. The maximum adsorption capacity of 352.3 mg g-1 was obtained within 30 min under optimum reaction conditions. A typical Langmuir adsorption isotherm with was observed for adsorption of Tl(I) onto POSS-SH@CAG-CEL/AP and pseudo-second-order kinetic model provided the best correlation between experimental data. Thermodynamic studies showed that the Tl(I) adsorption was spontaneous process and exothermic. Also, the reusability tests confirmed that the POSS-SH@CAG-CEL/AP can be reused for four times without any remarkable change in its adsorption capacity. Thus, this reusable biobased composite hydrogel can be an ideal candidate for elimination of Tl(I) from aqueous solutions.

Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water

Water pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention and purification methods, including hydrotherapy, membrane filtration, mechanical filters, reverse osmosis, ion exchange, and copper-zinc cleaning. The article also highlights domestic purification, field techniques, heavy metal removal, and emerging technologies like nanochips, graphene, nanofiltration, atmospheric water generation, and wastewater treatment plants (WWTPs)-based cleaning. Emphasizing water cleaning's significance for ecosystem protection and human health, the review discusses pollution challenges and explores the integration of wastewater treatment, coagulant processes, and nanoparticle utilization in management. It advocates collaborative efforts and innovative research for freshwater preservation and pollution mitigation. Innovative biological systems, combined with filtration, disinfection, and membranes, can elevate recovery rates by up to 90%, surpassing individual primary (<10%) or biological methods (≤50%). Advanced treatment methods can achieve up to 95% water recovery, exceeding UN goals for clean water and sanitation (Goal 6). This progress aligns with climate action objectives and safeguards vital water-rich habitats (Goal 13). The future holds promise with advanced purification techniques enhancing water quality and availability, underscoring the need for responsible water conservation and management for a sustainable future.

Polyaniline as a Nitrogen Source and Lignosulfonate as a Sulphur Source for the Preparation of the Porous Carbon Adsorption of Dyes and Heavy Metal Ions

Using agricultural and forestry wastes as raw materials, adsorbent materials were prepared for dye adsorption in wastewater, which can minimize the environmental load and fully realize sustainability by treating waste with waste. Taking lignosulfonate as a raw material, due to its molecular structure having more reactive groups, it is easy to form composite materials via a chemical oxidation reaction with an aniline monomer. After that, using a sodium lignosulfonate/polyaniline composite as the precursor, the activated high-temperature pyrolysis process is used to prepare porous carbon materials with controllable morphology, structure, oxygen, sulfur, and nitrogen content, which opens up a new way for the preparation of functional carbon materials. When the prepared O-N-S co-doped activated carbon materials (SNC) were used as adsorbents, the adsorption study of cationic dye methylene blue was carried out, and the removal rate of SNC could reach up to 99.53% in a methylene blue solution with an initial concentration of 100 mg/L, which was much higher than that of undoped lignocellulosic carbon materials, and the kinetic model conformed to the pseudo-second-order kinetic model. The adsorption equilibrium amount of NC (lignosulfonate-free) and SNC reached 478.30 mg/g and 509.00 mg/g, respectively, at an initial concentration of 500 mg/L, which was consistent with the Langmuir adsorption isothermal model, and the adsorption of methylene blue on the surface of the carbon material was a monomolecular layer. The adsorption of methylene blue dye on the carbon-based adsorbent was confirmed to be a spontaneous and feasible adsorption process by thermodynamic parameters. Finally, the adsorption of SNC on methylene blue, rhodamine B, Congo red, and methyl orange dyes were compared, and it was found that the material adsorbed cationic dyes better. Furthermore, we also studied the adsorption of SNC on different kinds of heavy metal ions and found that its adsorption selectivity is better for Cr3+ and Pb2+ ions.

Absolute CO2 /Xenon Separation in Ultramicropore MOF for Anesthetic Gases Regeneration

Xe is an ideal anesthetic gas, but it has not been widely used in practice due to its high cost and low output. Closed-circuit Xe recovery and recycling is an economically viable method to ensure adequate supply in medical use. Herein, we design an innovative way to recover Xe by using a stable fluorinated metal-organic framework (MOF) NbOFFIVE-1-Ni to eliminate CO2 from moist exhaled anesthetic gases. Unlike other Xe recovery MOFs with low Xe/CO2 selectivity (less than 10), NbOFFIVE-1-Ni could achieve absolute molecular sieve separation of CO2 /Xe with excellent CO2 selectivity (825). Mixed-gas breakthrough experiments assert the potential of NbOFFIVE-1-Ni as a molecular sieve adsorbent for the effective and energy-efficient removal of carbon dioxide with 99.16 % Xe recovery. Absolute CO2 /Xe separation in NbOFFIVE-1-Ni makes closed-circuit Xe recovery and recycling can be easily realized, demonstrating the potential of NbOFFIVE-1-Ni for important anesthetic gas regeneration under ambient conditions.

Recent Advances in Metal-Organic Framework (MOF)-Based Photocatalysts: Design Strategies and Applications in Heavy Metal Control

The heavy metal contamination of water systems has become a major environmental concern worldwide. Photocatalysis using metal-organic frameworks (MOFs) has emerged as a promising approach for heavy metal remediation, owing to the ability of MOFs to fully degrade contaminants through redox reactions that are driven by photogenerated charge carriers. This review provides a comprehensive analysis of recent developments in MOF-based photocatalysts for removing and decontaminating heavy metals from water. The tunable nature of MOFs allows the rational design of composition and features to enhance light harvesting, charge separation, pollutant absorptivity, and photocatalytic activities. Key strategies employed include metal coordination tuning, organic ligand functionalization, heteroatom doping, plasmonic nanoparticle incorporation, defect engineering, and morphology control. The mechanisms involved in the interactions between MOF photocatalysts and heavy metal contaminants are discussed, including light absorption, charge carrier separation, metal ion adsorption, and photocatalytic redox reactions. The review highlights diverse applications of MOF photocatalysts in treating heavy metals such as lead, mercury, chromium, cadmium, silver, arsenic, nickel, etc. in water remediation. Kinetic modeling provides vital insights into the complex interplay between coupled processes such as adsorption and photocatalytic degradation that influence treatment efficiency. Life cycle assessment (LCA) is also crucial for evaluating the sustainability of MOF-based technologies. By elucidating the latest advances, current challenges, and future opportunities, this review provides insights into the potential of MOF-based photocatalysts as a sustainable technology for addressing the critical issue of heavy metal pollution in water systems. Ongoing efforts are needed to address the issues of stability, recyclability, scalable synthesis, and practical reactor engineering.

Functional MOF-Based Materials for Environmental and Biomedical Applications: A Critical Review

Over the last ten years, there has been a growing interest in metal-organic frameworks (MOFs), which are a unique category of porous materials that combine organic and inorganic components. MOFs have garnered significant attention due to their highly favorable characteristics, such as environmentally friendly nature, enhanced surface area and pore volume, hierarchical arrangements, and adjustable properties, as well as their versatile applications in fields such as chemical engineering, materials science, and the environmental and biomedical sectors. This article centers on examining the advancements in using MOFs for environmental remediation purposes. Additionally, it discusses the latest developments in employing MOFs as potential tools for disease diagnosis and drug delivery across various ailments, including cancer, diabetes, neurological disorders, and ocular diseases. Firstly, a concise overview of MOF evolution and the synthetic techniques employed for creating MOFs are provided, presenting their advantages and limitations. Subsequently, the challenges, potential avenues, and perspectives for future advancements in the utilization of MOFs in the respective application domains are addressed. Lastly, a comprehensive comparison of the materials presently employed in these applications is conducted.

Adsorption of heavy metals on natural zeolites: A review

Water pollution has jeopardized human health, and a safe supply of drinking water has been recognized as a worldwide issue. The increase in the accumulation of heavy metals in water from different sources has led to the search for efficient and environmentally friendly treatment methods and materials for their removal. Natural zeolites are promising materials for removing heavy metals from different sources contaminating the water. It is important to know the structure, chemistry, and performance of the removal of heavy metals from water, of the natural zeolites to design water treatment processes. This review focuses on critical analyses of the application of distinct natural zeolites for the adsorption of heavy metals from water, specifically, arsenic (As(III), As(V)), cadmium (Cd(II)), chromium (Cr(III), Cr(VI)), lead (Pb(II)), mercury(Hg(II)) and nickel (Ni(II)). The reported results of heavy-metal removal by natural zeolites are summarized, and the chemical modification of natural zeolites by acid/base/salt reagent, surfactants, and metallic reagents has been analyzed, compared, and described. Furthermore, the adsorption/desorption capacity, systems, operating parameters, isotherms, and kinetics for natural zeolites were described and compared. According to the analysis, clinoptilolite is the most applied natural zeolite to remove heavy metals. It is effective in removing As, Cd, Cr, Pb, Hg, and Ni. Additionally, an interesting fact is a variation between the natural zeolites from different geological origins regarding the sorption properties and capacities for heavy metals suggesting that natural zeolites from different regions of the world are unique.

Nanomaterials in biochar: Review of their effectiveness in remediating heavy metal-contaminated soils

Biochar can be used for soil remediation in environmentally beneficial manner, especially when combined with nanomaterials. After a decade of research, still, no comprehensive review was conducted on the effectiveness of biochar-based nanocomposites in controlling heavy metal immobilization at soil interfaces. In this paper, the recent progress in immobilizing heavy metals using biochar-based nanocomposite materials were reviewed and compared their efficacy against that of biochar alone. In details, an overview of results on the immobilization of Pb, Cd, Cu, Zn, Cr, and As was presented by different nanocomposites made by various biochars derived from kenaf bar, green tea, residual bark, cornstalk, wheat straw, sawdust, palm fiber, and bagasse. Biochar nanocomposite was found to be most effective when combined with metallic nanoparticles (Fe₃O₄ and FeS) and carbonaceous nanomaterials (graphene oxide and chitosan). This study also devoted special consideration to different remediation mechanisms by which the nanomaterials affect the effectiveness of the immobilization process. The effects of nanocomposites on soil characteristics related to pollution migration, phytotoxicity, and soil microbial composition were assessed. A future perspective on nanocomposites' use in contaminated soils was presented.

Applications of BiOX in the Photocatalytic Reactions

BiOX (X = Cl, Br, I) families are a kind of new type of photocatalysts, which have attracted the attention of more and more researchers. The suitable band gaps and their convenient tunability via the change of X elements enable BiOX to adapt to many photocatalytic reactions. In addition, because of their characteristics of the unique layered structure and indirect bandgap semiconductor, BiOX exhibits excellent separation efficiency of photogenerated electrons and holes. Therefore, BiOX could usually demonstrate fine activity in many photocatalytic reactions. In this review, we will present the various applications and modification strategies of BiOX in photocatalytic reactions. Finally, based on a good understanding of the above issues, we will propose the future directions and feasibilities of the reasonable design of modification strategies of BiOX to obtain better photocatalytic activity toward various photocatalytic applications.

Fabrication of layered In2S3/WS2 heterostructure for enhanced and efficient photocatalytic CO2 reduction and various paraben degradation in water

Because of the excessive use of fossil fuels, CO₂ emissions into the environment are increasing. An efficient method of converting CO₂ to useful carbonaceous products in the presence of light is one way to address the issues associated with energy and environmental remediation. In₂S₃/WS₂ heterostructure has been fabricated using the efficient hydrothermal method. The results of structural, morphological, optical, and photo/electrochemical characterization confirm the formation of a hierarchical, layered heterostructure of type-II. Enhanced photocatalytic activity is observed in InS/WS heterostructure compared to pristine In₂S₃ and WS₂. InS/WS heterostructure exhibit higher photocatalytic activity than pure In₂S₃ and WS₂. For 12 h, photocatalytic CO₂ reduction produces 213.4 and 188.6 μmol of CO and CH₄, respectively. Furthermore, the photocatalytic ability of the synthesized materials to degrade different parabens (Methyl: MPB, Ethyl: EPB, and Benzyl: BPB) under visible radiation was evaluated. Under optimized conditions, the InS/WS heterostructure degraded 88.6, 90.4, and 95.8% of EPB, BPB, and MPB, respectively, in 90 min. The mechanism of photocatalysis was discussed in detail. MCF-7 cell viability was assessed and found to exhibit low mortality in InS/WS treated MPB aqueous solution. InS/WS heterostructure could improve the fabrication of more sulphide-based layered materials to combat environmental pollution.

Metal organic framework-loaded polyethersulfone/polyacrylonitrile photocatalytic nanofibrous membranes under visible light irradiation for the removal of Cr(vi) and phenol from water

In this work, various amounts of the UiO-66-NH₂ and UiO-66-NH₂/TiO₂ MOFs have been loaded into polyacrylonitrile (PAN) nanofibers supported on polyethersulfone (PES). The visible light irradiation was used to investigate the influence of pH (2-10), initial concentration (10-500 mg L^-1), and time (5-240 min) on the removal efficiency of phenol and Cr(vi) in the presence of MOFs. The reaction time: 120 min, catalyst dosage: 0.5 g L^-1, pH: 2 for Cr(vi) ions and pH: 3 for phenol molecules were optimum to degrade phenol and to reduce Cr(vi) ions. The characterization of the produced samples was performed using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller analysis. The capability of synthesized photocatalytic membranes was investigated for the removal of phenol and Cr(vi) ions from water. The water flux, Cr(vi) and phenol solutions fluxes and their rejection percentages were evaluated under pressure of 2 bar in the presence of visible light irradiation and in the dark. The best performance of the synthesized nanofibers was obtained for UiO-66-NH₂/TiO₂ MOF 5 wt% loaded-PES/PAN nanofibrous membranes at temperature of 25 °C and pH of 3. Results demonstrated the high capability of MOFs-loaded nanofibrous membranes for the removal of various contaminants such as Cr(vi) ions and phenol molecules from water.

Recent advances in adsorption of environmental pollutants using metal-organic frameworks-based hydrogels

Water pollution is increasing significantly owing to industrialization and population growth that lead to serious environmental and health issues. Therefore, the design and development of more effective wastewater treatment approaches are necessary due to a significant upsurge in demand for freshwater. More recently, metal-organic frameworks (MOFs) have attracted attention in environmental science owing to their tunable porosity, unique structure, flexibility, and various composition. Despite these attractive advantages, some drawbacks, including intrinsic fragility, unsatisfied processability, dust formation, and poor reusability, have greatly limited their applications. Therefore, MOFs are often designed as supported-based MOFs (e.g., MOFs-coated composites) or 3D structured composites, such as MOFs-based hydrogels. MOFs-based hydrogels are excellent candidates in the sorption process because of their appropriate adsorption capacity, porous structure, good mechanical properties, durability as well as biodegradable features. In this review, the removal of different pollutants (e.g., synthetic dyes, phosphates, heavy metals, antibiotics, and some organic compounds) from aqueous media has been studied by the adsorption process using MOFs-based hydrogels. The important advancements in the fabrication of MOFs-based hydrogels and their capacities in the adsorption of pollutants under experimental conditions have been discussed. Finally, problems and future perspectives on the adsorption process using MOFs-based hydrogels have been investigated.

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.

Recent advances in application of heterogeneous electro-Fenton catalysts for degrading organic contaminants in water

Over the last decades, advanced oxidation processes (AOPs) have been widely used in surface and ground water pollution control. The heterogeneous electro-Fenton (EF) process has gained much attention due to its properties of high catalytic performance, no generation of iron sludge, and good recyclability of catalyst. As of October 2022, the cited papers and publications of EF are around 1.3 × 10^-5 and 3.4 × 10^-3 in web of science. Among the AOP techniques, the contaminant removal efficiencies by EF process are above 90% in most studies. Current reviews mainly focused on the mechanism of EF and few reviews comprehensively summarized heterogeneous catalysts and their applications in wastewater treatment. Thus, this review focuses on the current studies covering the period 2012-2022, and applications of heterogeneous catalysts in EF process. Two kinds of typical heterogeneous EF systems (the addition of solid catalysts and the functionalized cathode catalysts) and their applications for organic contaminants degradation in water are reviewed. In detail, solid catalysts, including iron minerals, iron oxide-based composites, and iron-free catalysts, are systematically described. Different functionalized cathode materials, containing Fe-based cathodes, carbonaceous-based cathodes, and heteroatom-doped cathodes, are also reviewed. Finally, emphasis and outlook are made on the future prospects and challenges of heterogeneous EF catalyst for wastewater treatments.

Enhanced elimination of Cr(VI) from aqueous media by polyethyleneimine modified corn straw biochar supported sulfide nanoscale zero valent iron: Performance and mechanism

A novel polyethyleneimine modified corn straw biochar supported sulfide nanoscale zero-valent iron (S-nZVI@PBC) was developed to enhance Cr(VI) removal from aqueous media. The characteristics of morphology, chemical composition, and functional groups of S-nZVI@PBC, as well as its kinetics and mechanism for Cr(VI) removal were explored. Characterization verified S-nZVI was successfully loaded onto PEI modified biochar. The adsorption process was well represented pseudo-second-order model (R² = 0.990) and Langmuir isotherm model (R² = 0.962), indicating it was a monolayer chemical adsorption process. The Cr(VI) removal was affected by pH and achieved the maximum when pH = 3.0, which may be ascribed to the better corrosion of nZVI and release of Fe(II) from the S-nZVI@PBC in acidic condition. The primary mechanisms were adsorption, reduction, and co-precipitation. S-nZVI@PBC exhibited higher stability and reusability than nZVI, which makes it more promising in environmental application. Overall, S-nZVI@PBC is of great potential for treating Cr(VI)-containing wastewater.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Removal of Chromium Species by Adsorption: Fundamental Principles, Newly Developed Adsorbents and Future Perspectives

Emerging chromium (Cr) species have attracted increasing concern. A majority of Cr species, especially hexavalent chromium (Cr(VI)), could lead to lethal effects on human beings, animals, and aquatic lives even at low concentrations. One of the conventional water-treatment methodologies, adsorption, could remove these toxic Cr species efficiently. Additionally, adsorption possesses many advantages, such as being cost-saving, easy to implement, highly efficient and facile to design. Previous research has shown that the application of different adsorbents, such as carbon nanotubes (carbon nanotubes (CNTs) and graphene oxide (GO) and its derivatives), activated carbons (ACs), biochars (BCs), metal-based composites, polymers and others, is being used for Cr species removal from contaminated water and wastewater. The research progress and application of adsorption for Cr removal in recent years are reviewed, the mechanisms of adsorption are also discussed and the development trend of Cr treatment by adsorption is proposed.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

Evaluation of HKUST-1 as Volatile Organic Compound Adsorbents for Respiratory Filters

Cyclohexane is a representative of volatile organic compounds (VOCs). VOCs can cause serious health problems in case of continuous exposure; therefore, it is essential to develop efficient personal protective equipment. Historically, activated carbons are used as VOC adsorbents. However, the emergence of promising novel adsorbents, such as metal-organic frameworks, has pushed the research to study their behavior under the same conditions. In this work, the use of the well-known HKUST-1 MOF of different particle sizes (20 μm, 300-600 μm, and 1-1.18 mm) for the adsorption of low-grade (5000 ppm) cyclohexane combined with different water concentrations (dry, 27 and 80% RH) in a fixed bed is proposed. The results were compared under the same conditions for a typically used activated carbon, PICACTIF TA 60. HKUST-1 has higher affinity to cyclohexane than PICACTIF for the whole pressure range studied, especially at low partial pressures. It begins to adsorb much earlier (0.0025 kPa) than the activated carbon (0.01 kPa). However, a different adsorption behavior is evidenced for both materials in the presence of water vapor since HKUST-1 is very hydrophilic in the zone near to the copper open metal sites, whereas PICACTIF is hydrophobic. After three consecutive cycles, good stability results were obtained for the MOF, comparable to activated carbon, even in the presence of water. As the main finding, although the unstability of HKUST-1 is well established under high humid conditions, the kinetic of degradation has not been established so far. Here, it is shown that the time usage of HKUST-1 as the adsorbent for respiratory mask (single pass) is not affected by the degradation of the structure, which may occur on a longer time scale. Finally, shaping by tableting provides good results since it is possible to increase the MOF density by around 69% with minor loss of adsorption capacity. The best fraction is 300-600 μm, reaching cyclohexane breakthrough times around 85 min/cm³ at 80% RH, comparable with PICACTIF-activated carbon and promising for practical applications.

Evaluation and analysis of the toxicity of mercury (Hg2+) to allophycocyanin from Spirulina platensis in vitro

As a global environmental pollution problem, heavy metal pollution has brought great harm to human beings. In this work, we studied the toxicity of Hg²⁺ on allophycocyanin (APC) at the molecular level. Firstly, APC was extracted and purified from Spirulina platensis mud and its purity (A₆₅₀/A₂₈₀) reached 3.75. In addition, the fluorescence intensity of APC decreased with increasing Hg²⁺ concentration from 0 to 5 × 10^-6 mol L^-1. The theoretical calculation and experimental results showed that the fluorescence quenching of APC by Hg²⁺ was static and had a good linear relationship. Moreover, the UV-Vis spectra of APC showed a significant decrease at 200 nm and 650 nm with the increase of Hg²⁺ concentration from 0 to 5×10^-6 mol L^-1, and a red-shift at 200 nm, which indicated that Hg²⁺ not only affected the structure of APC but also affected the light absorption and photosynthetic function of APC. Furthermore, the results of molecular simulation demonstrate that Hg²⁺ combinations with the Met77, Cys81 in the α chain and the Arg77, Cys81 in the β chain, which interact between the peptide chain and the chromophore, and Hg²⁺ forms a Hg-S bond with -SH. This study provides new insights into the structure and how Hg²⁺ effect the optical properties of APC.

Photocatalytic activity of calcined chicken eggshells for Safranin and Reactive Red 180 decolorization

One of the most important problems affecting the environment today is the inability to adequately treat wastewater containing dyes. Among of the many treatment processes used in the treatment of dye-containing wastewater, photocatalytic based wastewater treatment processes attract the attention of scientists as a new, economically feasible, and promising approach which has been in practice for a few decades. However, in order to use these processes in wider areas, cheap and effective catalysts are still being developed today. In this study, the photocatalytic activity of eggshell-CaO produced from waste chicken eggshells was investigated for decolorization of Safranin (Basic Red 2) and Reactive Red 180 (RR180) dyes. First, sintering process was applied to the waste chicken eggshells at different temperatures (300, 600, 900 °C) in order to observe CaO formation from the eggshells. Second, the parameters such as photocatalyst amount, pH, concentration of dyes, and reaction time were optimized on dye removal efficiency in photocatalytic experiments. The optimum conditions were performed under visible light and found to be 1 g/L of catalyst amount (sintered at 900 °C), original solution pH (6.80 for Safranin and 6.60 for RR180), and 5 mg/L of dye concentration. The photocatalytic removal efficiencies of Safranin and RR180 dyes were 100% and 97.90%, respectively, under the determined optimum experimental conditions. The adsorption efficiency of the dyes that could be realized during the photocatalytic experiment was measured as 20.99% and 9.99% for Safranin and RR180 dyes, respectively.

Mercury removal efficiency of disulfide- and thiol-functionalized lanthanide coordination polymers

To compare efficiency of disulfide and thiol groups in removing mercury from aqueous medium without noteworthy influence from structural differences, a series of new [Ln^III(dtba)_1.5(H₂O)₂] (Ln^III = Eu^III (I), Gd^III (II) and Tb^III (III), H₂dtba = 4,4'-dithiobenzoic acid) were synthesized and characterized. The single crystal structure of I was elucidated and is described. Reaction of II with hydrazine gave II^SH containing disulfide and thiol groups. Experimental data confirmed the preserved framework structure and the co-existing of disulfide and thiol groups in II^SH. Robustness of II and II^SH over a wide range of pH (2-10) was confirmed and their mercury removal performances at different pH were evaluated in terms of removal efficiencies (%R), equilibrium uptake capacities (q_e) and distribution constant (K_d). The dependence of these parameters on pH is reported. The best values of %R, q_e and K_d could be achieved at pH 10 at which surfaces of the adsorbents were negatively charged; 86%R, 429 mg g^-1, and 6.04 × 10³ mL g^-1 (II), and 98%R, 490 mg g^-1 and 5.08 × 10⁴ mL g^-1 (II^SH). At pH 7, influences of the initial concentration of mercury on performances of the adsorbents as well as the adsorption isotherms and kinetics were examined from which the better performance of II^SH has been concluded. The characterization of the adsorptions by the Langmuir model and the pseudo-second-order kinetic as well as their excellent consistency with the experimental data are included. At neutral pH, selectivity to the adsorption of mercury and tolerance to common anions were illustrated. The better affinity between mercury and thiol group and therefore its contribution to the better performance of II^SH was then ascertained by a computational study.

Application of Metal–Organic Framework in Diagnosis and Treatment of Diabetes

Diabetes-related chronic wounds are often accompanied by a poor wound-healing environment such as high glucose, recurrent infections, and inflammation, and standard wound treatments are fairly limited in their ability to heal these wounds. Metal–organic frameworks (MOFs) have been developed to improve therapeutic outcomes due to their ease of engineering, surface functionalization, and therapeutic properties. In this review, we summarize the different synthesis methods of MOFs and conduct a comprehensive review of the latest research progress of MOFs in the treatment of diabetes and its wounds. State-of-the-art in vivo oral hypoglycemic strategies and the in vitro diagnosis of diabetes are enumerated and different antimicrobial strategies (including physical contact, oxidative stress, photothermal, and related ions or ligands) and provascular strategies for the treatment of diabetic wounds are compared. It focuses on the connections and differences between different applications of MOFs as well as possible directions for improvement. Finally, the potential toxicity of MOFs is also an issue that we cannot ignore.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e-/h+), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.