Multi-residue analysis of 90 emerging contaminants in liquid and solid environmental matrices by ultra-high-performance liquid chromatography tandem mass spectrometry

Comprehensive review of emerging contaminants: Detection technologies, environmental impact, and management strategies

Emerging contaminants (ECs) are a diverse group of unregulated pollutants increasingly present in the environment. These contaminants, including pharmaceuticals, personal care products, endocrine disruptors, and industrial chemicals, can enter the environment through various pathways and persist, accumulating in the food chain and posing risks to ecosystems and human health. This comprehensive review examines the chemical characteristics, sources, and varieties of ECs. It critically evaluates the current understanding of their environmental and health impacts, highlighting recent advancements and challenges in detection and analysis. The review also assesses existing regulations and policies, identifying shortcomings and proposing potential enhancements. ECs pose significant risks to wildlife and ecosystems by disrupting animal hormones, causing genetic alterations that diminish diversity and resilience, and altering soil nutrient dynamics and the physical environment. Furthermore, ECs present increasing risks to human health, including hormonal disruptions, antibiotic resistance, endocrine disruption, neurological effects, carcinogenic effects, and other long-term impacts. To address these critical issues, the review offers recommendations for future research, emphasizing areas requiring further investigation to comprehend the full implications of these contaminants. It also suggests increased funding and support for research, development of advanced detection technologies, establishment of standardized methods, adoption of precautionary regulations, enhanced public awareness and education, cross-sectoral collaboration, and integration of scientific research into policy-making. By implementing these solutions, we can improve our ability to detect, monitor, and manage ECs, reducing environmental and public health risks.

Monitoring Pharmaceuticals and Personal Care Products in Healthcare Effluent Wastewater Samples and the Effectiveness of Drug Removal in Wastewater Treatment Plants Using the UHPLC-MS/MS Method

A multi-residue UHPLC-MS/MS analytical method, previously developed for monitoring 52 pharmaceuticals in drinking water, was used to analyse these pharmaceuticals in wastewater originating from healthcare facilities in the Czech Republic. Furthermore, the methodology was expanded to include the evaluation of the effectiveness of drug removal in Czech wastewater treatment plants (WWTPs). Of the 18 wastewater samples analysed by the validated UHPLC-MS/MS, each sample contained at least one quantifiable analyte. This study reveals the prevalence of several different drugs; mean concentrations of 702 μg L-1 of iomeprol, 48.8 μg L-1 of iopromide, 29.9 μg L-1 of gabapentin, 42.0 μg L-1 of caffeine and 82.5 μg L-1 of paracetamol were present. An analysis of 20 samples from ten WWTPs revealed different removal efficiencies for different analytes. Paracetamol was present in the inflow samples of all ten WWTPs and its removal efficiency was 100%. Analytes such as caffeine, ketoprofen, naproxen or atenolol showed high removal efficiencies exceeding 80%. On the other hand, pharmaceuticals like furosemide, metoprolol, iomeprol, zolpidem and tramadol showed lower removal efficiencies. Four pharmaceuticals exhibited higher concentrations in WWTP effluents than in the influents, resulting in negative removal efficiencies: warfarin at -9.5%, indomethacin at -53%, trimethoprim at -54% and metronidazole at -110%. These comprehensive findings contribute valuable insights to the pharmaceutical landscape of wastewater from healthcare facilities and the varied removal efficiencies of Czech WWTPs, which together with the already published literature, gives a more complete picture of the burden on the aquatic environment.

A high-throughput analytical method for complex contaminant mixtures in biosolids

Biosolids are rich in organic matter and other nutrients that contribute to environmental and agricultural sustainability by improving soil textural and biological properties and enhancing plant growth when applied to agricultural crops. Land application of biosolids encourages resource recovery and circumvents drawbacks associated with landfilling or incineration. However, biosolids contain numerous chemicals at trace levels, and quantitative analysis of such mixtures in this complex matrix is crucial for understanding and managing application risks. There are currently few analytical methods available that are capable of extracting and quantifying a large range of the emerging contaminants found in biosolids. In this study, a simplified, rapid, and robust method of analysis was developed and validated for a high-priority organic contaminant mixture of 44 endocrine disrupting compounds known to occur in biosolids. Analytes consisted of chemicals from many classes with a wide range of physiochemical properties (e.g., log Kow values from -1.4 to 8.9). The biosolids extraction and cleanup protocol was validated for 42 of the targeted compounds. The UPLC-MS2 parameters were validated for all 44 organic contaminants targeted for study. From the two batches of biosolids tested using this analytical method, most of the targeted contaminants (86%) were detected with 100% frequency at concentrations ranging from 0.036 to 10,226 μg/kg dw. Performance results highlighted that internal standards alone could not negate biosolids matrix effects; thus, internal standards and the standard addition method were used for residue quantification. This was the first study to detect and quantify 6PPD-q in biosolids, and the first to quantify lidocaine and 11 other chemicals in biosolids using a single analytical method. This method may be expanded for analysis of additional chemicals in biosolids and comparable matrices.

Chemometric Optimization of SPE for the Determination of Multiclass Pesticides in Portable Water Samples by UHPLC-MS/MS

This study aimed on the development of a SPE-UHPLC-MS/MS method for the simultaneous determination of pesticide residues in drinking water samples. A chemometric approach was applied to optimize the efficiency of the SPE pretreatment procedure. This study involved (i) the application of a Full Factorial Design for the screening of the significant factors, (ii) the application of a Central Composite Design for the determination of the optimal conditions and (iii) the evaluation and validation of the significance of the statistically proposed models. Oasis HLB cartridges were used for the extraction. The optimum sample volume was 300 mL and the elution solvent 3 mL of the mixture of methanol:ethylacetate 70:30 v/v. The method was validated according to the international guidelines. Recoveries were ranged from 63 to 116% and the detection limits were between 0.1 and 1.5 pg mL- 1. The validated method could be used in routine analysis for pesticides screening.

Targeted multi-analyte UHPLC-MS/MS methodology for emerging contaminants in septic tank wastewater, sludge and receiving surface water

Septic tanks treat wastewater of individual houses and small communities (up to 2000 people in Scotland) in rural and semi-urban areas and are understudied sources of surface water contamination. A multi-analyte methodology with solid phase extraction (SPE), ultra-sonic extraction, and direct injection sample preparation methods was developed to analyse a comprehensive range of emerging contaminants (ECs) including prescription and over-the-counter pharmaceuticals and related metabolites, natural and synthetic hormones, and other human wastewater marker compounds in septic tank influent and effluent, river water, suspended solids, and septic tank sludge by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). The number of quantifiable compounds in each matrix varied from 68 in septic tank wastewater to 59 in sludge illustrating its applicability across a range of matrices. Method quantification limits were 2.9 × 10-5-1.2 μg L-1 in septic tank influent, effluent and river water, with ≤0.01 μg L-1 achieved for 60% of ECs in all three water matrices, and 0.080-49 μg kg-1 in sludge. The developed method was applied to a septic tank (292 population equivalents) and the receiving river in the North-East of Scotland. Across all samples analysed, 43 of 68 ECs were detected in at least one matrix, demonstrating the method's sensitivity. The effluent concentrations suggest limited removal of ECs in septic tanks and a potential impact to river water quality for some ECs. However, further monitoring is required to better appreciate this. The developed methodology for a wide variety of ECs in a range of liquid and solid phases will allow, for the first time, a comprehensive assessment of ECs fate and removal in septic tanks, and their impact to surface water quality.

Hydroxylated transformation products of pharmaceutical active compounds: Generation from processes used in wastewater treatment plants and its environmental monitoring

Pharmaceutical active compounds (PhACs) are organic pollutants detected in wastewater and aquatic environments worldwide in concentrations ranging from ng L-1 to μg L-1. Wastewater effluents containing PhACs residues is discharged in municipal sewage and, subsequently collected in municipal wastewater treatment plants (WWTPs) where are not entirely removed. Thus, PhACs and its transformation products (TPs) are discharged into water bodies. In the current work, the transformation of PhACs under treatments used in municipal WWTPs such as biological, photolysis, chlorination, and ozonation processes was reviewed. Data set of the major transformation pathways were obtained of studies that performed the PhACs removal and TPs monitoring during batch-scale experiments using gas and liquid chromatography coupled with tandem mass spectrometry (GC/LC-MS/MS). Several transformation pathways as dealkylation, hydroxylation, oxidation, acetylation, aromatic ring opening, chlorination, dehalogenation, photo-substitution, and ozone attack reactions were identified during the transformation of PhACs. Especially, hydroxylation reaction was identified as transformation pathway in all the processes. During the elucidation of hydroxylated TPs several isobaric compounds as monohydroxylated and dihydroxylated were identified. However, hydroxylated TPs monitoring in wastewater and aquatic environments is a topic scarcely studied due to that has no environmental significance, lack of available analytic standars of hydroxylated TPs and lack of analytic methods for their identification. Thus, screening strategy for environmental monitoring of hydroxylated TPs was proposed through target and suspect screening using GC/LC-MS/MS systems. In the next years, more studies on the hydroxylated TPs monitoring are necessary for its detection in WWTPs effluents as well as studies on their environmental effects in aquatic environments.

Transformation products of antibacterial drugs in environmental water: Identification approaches based on liquid chromatography-high resolution mass spectrometry

In recent years, the presence of antibiotics in the aquatic environment has caused increasing concern for the possible consequences on human health and ecosystems, including the development of antibiotic-resistant bacteria. However, once antibiotics enter the environment, mainly through hospital and municipal discharges and the effluents of wastewater treatment plants, they can be subject to transformation reactions, driven by both biotic (e.g. microorganism and mammalian metabolisms) and abiotic factors (e.g. oxidation, photodegradation, and hydrolysis). The resulting transformation products (TPs) can be less or more active than their parent compounds, therefore the inclusion of TPs in monitoring programs should be mandatory. However, only the reference standards of a few known TPs are available, whereas many other TPs are still unknown, due to the high diversity of possible transformation reactions in the environment. Modern high-resolution mass spectrometry (HRMS) instrumentation is now ready to tackle this problem through suspect and untargeted screening approaches. However, for handling the large amount of data typically encountered in the analysis of environmental samples, these approaches also require suitable processing workflows and accurate tandem mass spectra interpretation. The compilation of a suspect list containing the possible monoisotopic masses of TPs retrieved from the literature and/or from laboratory simulated degradation experiments showed unique advantages. However, the employment of in silico prediction tools could improve the identification reliability. In this review, the most recent strategies relying on liquid chromatography-HRMS for the analysis of environmental TPs of the main antibiotic classes were examined, whereas TPs formed during water treatments or disinfection were not included.

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

A new Wastewater-Based Epidemiology workflow to estimate community wide non-communicable disease prevalence using pharmaceutical proxy data

This manuscript introduces a new wastewater-based epidemiology workflow for estimation of non-communicable diseases (NCDs) prevalence by using wastewater-based epidemiology (WBE) and pharmaceuticals/their metabolites as proxies for NCDs prevalence. 83 targets were selected (54 parent pharmaceuticals and 29 metabolites). Three critical aspects were tested: (i) Solid-Phase Extraction - Ultra-Performance Liquid Chromatography and Tandem Mass Spectrometry (SPE-UHPLC-MS/MS) method performance, (ii) biomarker stability under variable storage conditions (during sampling and long-term storage) and (iii) accounting for human metabolism in WBE back-calculations. High stability of most analytes was observed under tested storage conditions. A few exceptions include diazepam, dihydroketoprofen and 5-hydroxy-lansoprazole. Analyte recoveries varied between 75% and 125% for most analytes. MDLs ranged from 0.2 ng L-1 to 5.6 ng L-1, while MQLs from 0.2 ng L-1 to 16.8 ng L-1. The overall average method accuracy and precision were: 99.5% and 4.0% respectively. A fully validated method was tested using community wastewater in the Southwest of England to estimate pharmaceutical usage, test metabolism correction factors established and compare results with prescription data. The new WBE method for NCD approximation allowed for the estimation of the daily usage/intake of 69 NCD targets with a standardized approach and a consistent reporting format.

Non-target analysis for water characterization: wastewater treatment impact and selection of relevant features

Non-target analyses were conducted to characterize and compare the molecular profiles (UHPLC-HRMS fingerprint) of water samples from a wastewater treatment plant (WWTP). Inlet and outlet samples were collected from three campaigns spaced 6 months apart in order to highlight common trends. A significant impact of the treatment on the sample fingerprints was shown, with a 65-70% abatement of the number of features detected in the effluent, and more polar, smaller and less intense molecules found overall compared to those in WWTP influent waters. Multivariate analysis (PCA) associated with variations of the features between inlets and outlets showed that features appearing or increasing were correlated with effluents while those disappearing or decreasing were correlated with influents. Finally, effluent features considered as relevant to a potentially adverse effect on aqueous media (i.e. those which appeared or increased or slightly varied from the influent) were highlighted. Three hundred seventy-five features common with the 3 campaigns were thus selected and further characterized. For most of them, elementary composition was found to be C, H, N, O (42%) and C, H, N, O, P (18%). Considering the MS2 spectra and several reference MS2 databases, annotations were proposed for 35 of these relevant features. They include synthetic products, pharmaceuticals and metabolites.

An effective method for the simultaneous extraction of 173 contaminants of emerging concern in freshwater invasive species and its application

A robust and efficient extraction method was developed to detect a broad range of pollutants of emerging interest in three freshwater invasive species: American red crab (Prokambarus clarkii), Asian clam (Corbicula fluminea), and pumpkinseed fish (Lepomis gibbosus). One native species, "petxinot" clam (Anodonta cygnea), was also evaluated. Invasive species are often more resistant to contamination and could be used in biomonitoring studies to assess the effect of contaminants of emerging concern on aquatic ecosystems while preserving potentially threatened native species. So far, most extraction methods developed for this purpose have focused on analyzing fish and generally focus on a limited number of compounds, especially analyzing compounds from the same family. In this sense, we set out to optimize a method that would allow the simultaneous extraction of 87 PhACs, 11 flame retardants, 21 per- and poly-fluoroalkyl substances, and 54 pesticides. The optimized method is based on ultrasound-assisted solvent extraction. Two tests were performed during method development, one to choose the extraction solvent with the best recovery efficiencies and one to select the best clean-up. The analysis was performed by high-performance liquid chromatography coupled to high-resolution mass spectrometry. The method obtained recoveries between 40 and 120% and relative standard deviations of less than 25% for 85% of the analytes in the four validated matrices. Limits of quantification between 0.01 ng g-1 and 22 ng g-1 were obtained. Application of the method on real samples from the Albufera Natural Park of Valencia (Spain) confirmed the presence of contaminants of emerging concern in all samples, such as acetaminophen, hydrochlorothiazide, tramadol, PFOS, carbendazim, and fenthion. PFAS were the group of compounds with the highest mean concentrations. C. fluminea was the species with the highest detection frequency, and P. clarkii had the highest average concentrations, so its use is prioritized for biomonitoring studies.

The environmental sources of benzophenones: Distribution, pretreatment, analysis and removal techniques

Benzophenones (BPs) have wide practical applications in real human life due to its presence in personal care products, UV-filters, drugs, food packaging bags, etc. It enters the wastewater by daily routine activities such as showering, impacting the whole aquatic system, then posing a threat to human health. Due to this fact, the monitoring and removal of BPs in the environment is quite important. In the past decade, various novel analytical and removal techniques have been developed for the determination of BPs in environmental samples including wastewater, municipal landfill leachate, sewage sludge, and aquatic plants. This review provides a critical summary and comparison of the available cutting-edge pretreatment, determination and removal techniques of BPs in environment. It also focuses on novel materials and techniques in keeping with the concept of "green chemistry", and describes on challenges associated with the analysis of BPs, removal technologies, suggesting future development strategies.

Optimization and validation of an extraction method for the analysis of multi-class emerging contaminants in soil and sediment

Analytical methods for the determination of multi-class emerging contaminants are limited for soil and sediment while they are essential to provide a more complete picture of their distribution in the environment and to understand their fate in different environmental compartments. In this paper, we present the development and optimization of an analytical strategy that combines reliable extraction, purification and the analysis using ultra-pressure liquid chromatography triple quadrupole mass spectrometry (UPLC-MS/MS) of 90 emerging organic contaminants including pesticides, pharmaceuticals and personal care products, flame retardants, per- and polyfluoroalkyl substances (PFASs) and plasticizers in soil and sediment. To extract a wide range of chemicals, the extraction strategy is based on the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach. A number of different options were investigated (buffer, acidification, addition of EDTA, different types and combinations of dispersive SPE etc.) and the effectiveness of the chemical extraction procedure and the clean-up was assessed for two matrices: soil (organic matter content of 9%) and sediment (organic matter content of 1.9%). The method was fully validated for both matrices, in terms of accuracy, linearity, repeatability (intra-day), reproducibility (inter-day), method limits of detection and quantification (LODs and MLOQs, respectively). The final performance showed good accuracy and precision (mean recoveries were between 70 and 120% with relative standard deviations (RSD) less than 20% in most cases), low matrix effects, good linearity for the matrix-matched calibration curve (R2≥0.991) and MLOQs ranged from 0.25 and 10 µg/kg. To demonstrate the applicability and suitability of the validated method, soil and sediment samples from Vietnam, France, Sweden and Mexico were analyzed. The results showed that of the 90 target compounds, a total of 33 were quantified in the sediment and soil samples analyzed. In addition to multi-target analysis, this strategy could be suitable for non-target screening, to provide a more comprehensive view of the contaminants present in the samples.

Green Assessment of Analytical Procedures for the Determination of Pharmaceuticals in Sewage Sludge and Soil

The main difficulties when analyzing pharmaceutically active compounds (PhACs) in solid environmental samples is the complexity of the samples and the low concentration levels of such pollutants. Most efforts are focused in achieving good analytical performance parameters such as high recoveries or low detection limits without considering if the methods are environmentally friendly. In this work, the main tools proposed for assessing the greenness of analytical methodologies (Analytical Eco-scale, Green Analytical Procedure Index (GAPI), and Analytical GREEnness metric (AGREE)) have been applied to nine analytical procedures that include recent important analytical tendencies. The three metrics identified the paper spray ionization method as the greenest procedure since it used untreated samples for direct mass spectrometry analysis. Using Analytical Eco-scale, most of the evaluated procedures were rated as "acceptable green". However, the use of internal standards resulted key in the environmental impact of the method which provided contradictory results versus other metrics. GAPI found greenness similarities between most of selected methods, hindering a greenness classification. AGREE allowed the weighting of each evaluation criterion providing a greenness ranking. The application of each metric detecting their weaknesses and strengths was discussed. The incorporation of validation analytical features in greenness metrics was a gap revealed.

Study on the Effect of AO-Coupled Constructed Wetlands on Conventional and Trace Organic Pollutant Treatment

In this study, a pilot-scale integrated process was developed, which combined the integrated biological contact oxidation technology (AO) and the improved constructed wetland technology. The results showed significant removal efficiency for both conventional and trace organic pollutants. The average removal efficiencies for COD, NH4+-N, and TP were 78.52, 85.95, and 49.47%, respectively. For trace organic pollutants, triclocarban, triclosan, and sulfadiazine, the removal efficiencies reached 60.14, 57.42, and 84.29%, respectively. The AO stage played a crucial role in removing trace organic pollutants, achieving removal efficiencies of 37.28, 43.44, and 83.82% for triclocarban, triclosan, and sulfadiazine, respectively. Subsequent treatment using improved constructed wetland technology with coal slag + gravel fillers demonstrated the highest removal efficiency, with average efficiencies of 68.66, 63.38, and 81.32% for triclocarban, triclosan, and sulfadiazine, respectively. Correlation analysis revealed positive correlations between temperature, precipitation, and the removal efficiency of COD, NH4+-N, and TP, while negative correlations were observed with the removal efficiency of triclocarban, triclosan, and sulfadiazine. Furthermore, the influent concentrations of triclocarban and triclosan were significantly negatively correlated with the removal efficiency of COD and TP. The presence of triclocarban and triclosan potentially reduced the microbial diversity and hindered sludge sedimentation performance.

Wastewater profiling of illicit drugs, an estimation of community consumption: A case study of eThekwini Metropolitan Municipality, South Africa

Estimation of community-wide consumption of illicit drugs through wastewater analysis is a new concept in Africa although widely applied in developed nations as wastewater-based epidemiology (WBE). It is an important tool that can be used in understanding supply and demand patterns of illicit drug use on a local, national, and international scale. Information on illicit drug use is currently limited in Africa, because of a lack of monitoring structures by governments and financial constraints. This study hopes to bridge that gap by contributing to Africa's baseline information on illicit drug use. This study provides the first application of wastewater analysis to quantitatively evaluate daily illicit drug use in the eThekwini Metropolitan Municipality of KwaZulu-Natal Province of South Africa by quantifying the major urinary excreted metabolites, called drug target residues (DTRs), in raw wastewater from four major wastewater treatment plants (WWTPs) sampled for a week. The results showed that cocaine was the dominant illicit drug consumed in the catchment followed by amphetamine, methamphetamine, 3,4-methylenedioxymethamphetamine and 3,4-methylenedioxyamphetamine, with a per capita use of 360-3000 mg day-1 1000 inh-1, 47-800 mg day-1 1000 inh-1, 19-120 mg day -1 1000 inh-1, not detected (ND) to 4.9 mg day-1 1000 inh-1, and ND to 410 g day-1 1000 inh-1 respectively. The weekly usage patterns between the four WWTPs differed probably due to the lifestyle of the populace serving the different WWTPs. These results provide useful data on illicit drug use in eThekwini that can be utilised by public health agencies to implement suitable response strategies.

Combining chemical, bioanalytical and predictive tools to assess persistence, seasonality, and sporadic releases of organic micropollutants within the urban water cycle

Using a novel liquid chromatography-tandem mass spectrometry method with large volume direct injection and quantitation via isotope dilution, we evaluated the presence of 55 organic micropollutants in wastewater effluents, and locations within the Bow River and Elbow River watersheds in and around the city of Calgary, Alberta, Canada. In addition to establishing baseline micropollutant data for water utility operations, our study aimed to enhance our understanding of micropollutant behavior in the urban water cycle, assess the contributions of three wastewater treatment plants (WWTPs) to downstream receiving waters, explain the potential causes of total estrogenicity measured using the yeast-estrogen screen assay (YES), and prioritize a subset of substances for continuous monitoring. With data spanning 48 months and 95 river km, our results indicate the extensive persistence of metformin (antidiabetic), seasonality of N,N‑diethyl-m-toluamide (DEET, insect repellant), O-desmethylvenlafaxine (antidepressant metabolite), and sulfamethoxazole (antibiotic) in source waters, and sporadic detections of a well-known perfluoroalkyl substance (PFOA). The seasonality of pharmaceuticals at the sentinel downstream monitoring site appeared to coincide with river dilution while that of DEET was likely attributable to peak usage during the warmer months. Steroidal estrogens were rarely detected in wastewater effluents although total estrogenicity via YES was evident, suggesting the presence of less potent but more abundant non-steroidal estrogens (e.g., flame retardants, bisphenols, and phthalates). A conservative mass balance analysis suggests that the largest WWTP (serving a population of >1 million) consistently contributed the highest load of micropollutants, with the exception of metformin, which appeared to be influenced by a smaller WWTP (serving 115,000) that operates a different activated sludge process. We consider metformin, sucralose, diclofenac, and venlafaxine as more effective conservative tracers of wastewater pollution due to their notably higher concentrations and persistence in the Bow River compared to carbamazepine and caffeine, respectively. Finally, hierarchical clustering revealed a close association between E. coli and caffeine, supporting the use of caffeine as an indicator of short-term, untreated anthropogenic inputs. Overall, this study yields valuable insights on the presence, behavior, and sources of organic micropollutants in the urban water cycle and identifies indicators of anthropogenic impacts that are useful for prioritizing future monitoring campaigns in Calgary and elsewhere.

Monitoring Pharmaceuticals and Personal Care Products in Drinking Water Samples by the LC-MS/MS Method to Estimate Their Potential Health Risk

(1) The occurrence and accumulation of pharmaceuticals and personal care products in the environment are recognized scientific concerns. Many of these compounds are disposed of in an unchanged or metabolized form through sewage systems and wastewater treatment plants (WWTP). WWTP processes do not completely eliminate all active substances or their metabolites. Therefore, they systematically leach into the water system and are increasingly contaminating ground, surface, and drinking water, representing a health risk largely ignored by legislative bodies. Especially during the COVID-19 pandemic, a significantly larger amount of medicines and protective products were consumed. It is therefore likely that contamination of water sources has increased, and in the case of groundwater with a delayed effect. As a result, it is necessary to develop an accurate, rapid, and easily available method applicable to routine screening analyses of potable water to monitor and estimate their potential health risk. (2) A multi-residue UHPLC-MS/MS analytical method designed for the identification of 52 pharmaceutical products was developed and used to monitor their presence in drinking water. (3) The optimized method achieved good validation parameters, with recovery of 70-120% of most analytes and repeatability achieving results within 20%. In real samples of drinking water, at least one analyte above the limit of determination was detected in each of the 15 tap water and groundwater samples analyzed. (4) These findings highlight the need for legislation to address pharmaceutical contamination in the environment.

Biotic transformation products of sulfonamides in environmental water samples: High-resolution mass spectrometry-based tentative identification by a suspect screening approach

The presence of pharmaceuticals in the aquatic environment is mainly due to their release from the effluents of the wastewater treatment plants (WWTPs), which are unable to completely remove them and their transformation products (TPs). Sulfonamides (SAs) are a synthetic antibacterial class used for the treatment of both human and animal infections; they have often been reported in surface water, thus contributing to the antibiotic resistance emergency. Monitoring SA TPs should be important as well because they could still exert some pharmaceutical activity; however, many TPs are still unknown since several transformation processes are possible (e. g. human and animal metabolism, WWTP activities, environmental factors etc.). In this work, three of the most used SAs, i.e., sulfamethoxazole (SMX), sulfapyridine (SPY), and sulfadiazine (SDZ), were incubated for 20 days in a batch reactor with activated sludge under controlled conditions. Then, the water sample was extracted and analyzed by ultra-high performance liquid chromatography-high resolution mass spectrometry in the data dependent acquisition (DDA) mode. Starting from the literature data, the possible transformation pathways were studied, and for each SA, a list of TPs was hypothesized and used for the identification. The raw data files were processed with Compound Discoverer, and 44 TPs (18, 13, and 13 TPs for SMX, SPY, and SDZ, respectively), including multiple TPs, were manually validated. To overcome the limitation of the DDA, the identified TPs were used in an inclusion list to analyze WWTP samples by a suspect screening approach. In this way, 4 SMX TPs and 5 SPY TPs were tentatively identified together with their parent compounds. Among these TPs, 5 of 9 were acetylated forms, in agreement with previous literature reporting that acetylation is the predominant SA transformation.

Endocrine disrupting activity in sewage sludge: Screening method, microbial succession and cost-effective strategy for detoxification

Sewage sludge (SS) presents a high agronomic potential due to high concentrations of organic matter and nutrients, encouraging its recycling as a soil conditioner. However, the presence of toxic substances can preclude this use. To enable the safe disposal of this waste in agriculture, SS requires additional detoxification to decrease the environmental risks of this practice. Although some alternatives have been proposed in this sense, little attention is provided to eliminating endocrine-disrupting chemicals (EDCs). To fill this gap, this study aimed to develop effective and low-cost technology to eliminate EDCs from SS. For this, a detoxification process combining microorganisms and biostimulating agents (soil, sugarcane bagasse, and coffee grounds) was performed for 2, 4, and 6 months with aerobic and anaerobic SSs. The (anti-)estrogenic, (anti-)androgenic, retinoic-like, and dioxin-like activities of SSs samples were verified using yeast-based reporter-gene assays to prove the effectiveness of the treatments. A fractionation procedure of samples, dividing the target sample extract into several fractions according to their polarity, was conducted to decrease the matrix complexity and facilitate the identification of EDCs. A decrease in the abundance and microbial diversity of the SS samples was noted along the biostimulation with the predominance of filamentous fungal species over yeasts and gram-positive bacteria and non-fermenting rods over enterobacteria. Among the 9 EDCs quantified by LC-ESI-MS/MS, triclosan and alkylphenols presented the highest concentrations in both SS. Before detoxification, the studied SSs induced significant agonistic activity, especially at the human estrogen receptor α (hERα) and the human aryl hydrocarbon receptor (AhR). The raw anaerobic sludge also activated the androgen (hAR), retinoic acid (RARα), and retinoid X (RXRα) receptors. However, no significant endocrine-disrupting activities were observed after the SS detoxification, showing that the technology applied here efficiently eliminates receptor-mediated toxicity.

In-situ multi-mode extraction (iMME) sampler for a wide-scope analysis of chemical and biological targets in water in urbanized and remote (off-the-grid) locations

Chemical pollution (including chemicals of emerging concern - CECs) continues to gain increasing attention as a global threat to human health and the environment, with numerous reports on the adverse and sometimes devastating effects upon ecosystems the presence of these chemicals can have. Whilst many studies have investigated presence of CECs in aquatic environments, these studies have been often focused on higher income countries, leaving significant knowledge gaps for many low-middle income countries. This study proposes a new integrated powerless, in-situ multi-mode extraction (iMME) sampler for the analysis of chemicals (105 CECs) and biological (5 genes) markers in water in contrasting settings: an urbanized Avon River in the UK and remote Olifants River in Kruger National Park in South Africa. The overarching goal was to develop a sampling device that maintains integrity of a diverse range of analytes via analyte immobilization using polymeric and glass fibre materials, without access to power supply or cold chain (continuous chilled storage) for sample transportation. Chemical analysis was achieved using ultra-performance liquid chromatography coupled with tandem mass spectrometry. Several mobile CECs showed low stability in river water, at room temperature and typical 24 h sampling/transport time. It is therefore recommended that, in the absence of cooling, environmental water samples are spiked with internal standards on site, immediately after collection and analyte immobilization option is considered, in order to allow fully quantitative analysis. iMME has proven effective in immobilization, concentration and increased stability of CECs at room temperature (and at least 7 days storage) allowing for sample collection at remote locations. The results from the River Avon and Olifants River sampling indicate that the pristine environment of Olifants catchment is largely unaffected by CECs common in the urbanized River Avon in the UK with a few exceptions: lifestyle chemicals (e.g., caffeine, nicotine and their metabolites), paracetamol and UV filters due to tourism and carbamazepine due to its persistent nature. iMME equipped with an additional gene extraction capability provides an exciting new opportunity of comprehensive biochemical profiling of aqueous samples with one powerless in-situ device. Further work is required to provide full integration of the device and comprehensive assessment of performance in both chemical and biological targets.

Occurrence of contaminants of emerging concern in the Eerste River, South Africa: Towards the optimisation of an urban water profiling approach for public- and ecological health risk characterisation

The study evaluated the presence and fate of various contaminants of emerging concern (CECs) from a South African wastewater treatment works (WWTW) and surface waters located around an urban setting. A total of 45 CECs were quantified from nine sampling locations over an 11-month period. Daily loads (g/day) of the target analytes in the WWTW showed persistence of some CECs, along with population-normalised daily loads (mg/day/1000inh) of pharmaceuticals and drugs of abuse (DOA) that were estimated for the first time in the study area. Multiple chemical markers were recorded in river water located upstream of the WWTW discharge throughout the study period, suggesting a high degree of diffuse pollution from urban communities in the study area that are not connected to sewage networks or where sanitation services are limited. The potential of using defined surface water locations to perform community-wide substance use profiling for non-sewered communities was also explored. Environmental risk characterisation for the WWTW effluent and surface waters throughout the study period provided multiple risk quotients (RQ) for the target list of CECs spanning over various sentinel trophic levels. High risk profiles (RQ > 1.0) with a frequency of exceedance (FoE) larger than 75 % were recorded for several CECs in both WWTW effluent and surface water locations that suggest potential long-term ecological health risk impacts of pollution hotspot areas in the river catchment situated around the urban area. We present challenges in surface water quality within the study area that is relatable, or may even present more challenging, in other low- or middle-income country (LMICs) settings. The study also highlighted some challenges and limitations associated with the much-needed application of wastewater-based epidemiology (WBE) intervention in non-sewered communities that can inform on public health and communal substance use profiles of the entire urban setting.

Comprehensive insight into triclosan-from widespread occurrence to health outcomes

Humans are exposed to the variety of emerging environmental pollutant in everyday life. The special concern is paid to endocrine disrupting chemicals especially to triclosan which could interfere with normal hormonal functions. Triclosan could be found in numerous commercial products such as mouthwashes, toothpastes and disinfectants due to its antibacterial and antifungal effects. Considering the excessive use and disposal, wastewaters are recognized as the main source of triclosan in the aquatic environment. As a result of the incomplete removal, triclosan residues reach surface water and even groundwater. Triclosan has potential to accumulate in sediment and aquatic organisms. Therefore, the detectable concentrations of triclosan in various environmental and biological matrices emerged concerns about the potential toxicity. Triclosan impairs thyroid homeostasis and could be associated with neurodevelopment impairment, metabolic disorders, cardiotoxicity and the increased cancer risk. The growing resistance of the vast groups of bacteria, the evidenced toxicity on different aquatic organisms, its adverse health effects observed in vitro, in vivo as well as the available epidemiological studies suggest that further efforts to monitor triclosan toxicity at environmental levels are necessary. The safety precaution measures and full commitment to proper legislation in compliance with the environmental protection are needed in order to obtain triclosan good ecological status. This paper is an overview of the possible negative triclosan effects on human health. Sources of exposure to triclosan, methods and levels of detection in aquatic environment are also discussed.

Determination of pharmaceuticals and metabolites in sludge and hydrochar after hydrothermal carbonization using sonication-QuEChERS extraction method and UHPLC LTQ/Orbitrap MS

Pharmaceuticals (PhACs) are an important group of emerging contaminants that are released continuously in the environment from wastewater treatments plants (WWTPs). They can produce biological effects even though at very low concentrations. Conventional WWTPs are not able to remove or degrade completely emerging pollutants resulting in the presence of PhACs in sewage sludge after wastewater treatment. PhACs are found in sludge at low ppb-ppt levels, and their analysis and detection is a difficult task due to the complexity of sewage sludge matrices. Hydrothermal carbonization is currently being proposed as a suitable conversion technology for sewage sludge management to recover valuable products and to be used for soil amendment. In this work, a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS)-based methodology with a dispersive solid-phase extraction (d-SPE) clean-up followed by ultra-high-performance liquid chromatography coupled with high-resolution linear ion trap-Orbitrap mass spectrometry (UHPLC-LTQ/Orbitrap MS), operated in positive ionization mode, was adopted to investigate 33 multiclass pharmaceuticals in sewage sludge and in hydrochar produced after hydrothermal carbonization. The analytical method was first optimized studying various extraction parameters and finally validated in terms of linearity, recovery, intra and inter-day precisions, expanded uncertainty (%U)/Horrat ratio at three spiking levels, matrix-effects (ME), process efficiency (PE), and limits of detection and quantification. The developed methodology fulfilled all analytical requirements and was finally applied to sludge samples from the WWTP of Ioannina city where a group of antibiotics was detected at concentrations up to 15 ng g^-1 and psychiatric drugs such as amisulpride, clozapine, and citalopram were detected at higher concentration levels up to 205, 87.4 and 63.2 ng g^-1, respectively. The method was also applied to hydrothermally treated sludge sample under different reaction conditions. Most of the antibiotic compounds were not detected, and several psychiatric drugs such as mirtazapine, bupropion, valsartan, diazepam, and caffeine were found at concentrations below the LOQ.

Evaluating chemicals of emerging concern in the Ganga River at the two major cities Prayagraj and Varanasi through validated analytical approaches

Evaluating environmental water quality means to assess and protect the environment against unfriendly impacts from various organic impurities emerging from industrial emissions and those released during harvesting. Potential risks related with release of polycyclic aromatic hydrocarbons (PAHs), pesticides and pharmaceuticals (PhAcs), and personal care products (PCPs) into the environment have turned into an increasingly serious issue in ecological safety. Monitoring helps in control of chemicals and ecological status compliance to safeguard specific water uses, for example, drinking water abstraction. A longitudinal review was carried out for 55 different persistent organic pollutants (POPs) for the Ganga River which passes through the urban areas of Prayagraj and Varanasi, India, through validated analytical approaches and measurement uncertainty (MU) estimation to assess their potential use for routine analysis. Furthermore, environmental risk assessment (ERA) carried out in the present study has revealed risk quotient (RQ) higher than 1 in a portion of the aquatic bodies. Using a conservative RQ strategy, POPs were assessed for having extensive risks under acute and chronic exposure, proposing that there is currently critical ecological risk identified with these compounds present in the Ganga River. In general, these outcomes demonstrate a significant contribution for focusing on measures and feasible techniques to minimize the unfavorable effects of contaminants on the aquatic environment.

Determination of contaminants of emerging concern in raw pig manure as a whole: difference with the analysis of solid and liquid phases separately

The content of veterinary drugs in manure is usually estimated by the amount of residues determined in its solid or liquid phase, individually, which previously required a separation step. As an alternative, a multiresidue method for the analysis of 48 veterinary drugs and other contaminants of emerging concern (CECs) in swine raw manure as a whole has been developed and in-house validated in this work. The impact of several experimental factors during ultrasound assisted extraction was assessed. Hence, the use of alumina seemed to especially decrease the matrix effect and improve the overall recovery of drugs, mainly those with a high octanol-water partition coefficient. CECs in the extracts were analyzed by ultra-high performance liquid chromatography coupled to mass spectrometry in tandem. A standard addition-matrix matched calibration was used for quantification. Application of the method to two related samples (raw manure and farm centrifuged raw manure) from a facility revealed that the concentrations of CECs determined in the raw manure by the comprehensive methodology were higher than those calculated by adding the concentrations measured in the solid and liquid phases, separately. This was attributed to the loss of CECs adsorbed on fine particles in the suspension during the sample preparation procedure of the liquid-phase. Furthermore, the decrease of residues in the raw manure when this is centrifuged in the farm to yield compost is shown.

Pharmaceutical pollution of hospital effluents and municipal wastewaters of Eastern Canada

Quantification of drugs residues in wastewaters of different sources could help better understand contamination pathways, eventually leading to effluent regulation. However, limited data are available for hospital-derived wastewaters. Here, an analytical method based on automated on-line solid-phase extraction liquid chromatography tandem mass spectrometry (on-line SPE - UPLC-MS/MS) was developed for the quantification of multi-class pharmaceuticals in wastewaters. Filtrate phase and suspended solids (SPM) were both considered to evaluate the distribution of targeted analytes. Experimental design optimization involved testing different chromatographic columns, on-line SPE columns, and loading conditions for the filtrate phase, and different organic solvents and cleanup strategies for suspended solids. The selected methods were validated with suitable limits of detection, recovery, accuracy, and precision. A total of 30 hospital effluents and 6 wastewater treatment plants were sampled to evaluate concentrations in real field-collected samples. Certain pharmaceuticals were quantified at high levels such as caffeine at 670,000 ng/L in hospital wastewaters and hydroxyibuprofen at 49,000 ng/L in WWTP influents. SPM samples also had high contaminant concentrations such as ibuprofen at 31,000 ng/g in hospital effluents, fluoxetine at 529 ng/g in WWTP influents or clarithromycin at 295 ng/g in WWTP effluents. Distribution coefficients (K_d) and particle-associated fractions (Φ) indicate that pharmaceuticals tend to have better affinity to suspended solids in hospital wastewater than in municipal wastewaters. The results also bring arguments for at source treatment of these specific effluents before their introduction into urban wastewater systems.

Rapid detection and speciation of illicit drugs via a thin-film microextraction approach for wastewater-based epidemiology study

High detection frequency of illicit drugs in water samples urges the development of rapid detection method for wastewater-based epidemiology (WBE) study. Here, we first developed a fast, convenient, and cost-effective method by combining thin-film microextraction (TFME) with gas chromatography-mass spectrometry (GC-MS) for sensing illicit drugs in wastewater sample. A divinylbenzene particle-loaded membrane was prepared by dip coating on a copper mesh. The sampling conditions of three illicit drugs were optimized and the performance of the proposed method was evaluated. The limit of detection was 5.5 2.0, and 1.1 ng L^-1 for methamphetamine (MAMP), ketamine (KET), and methaqualone (MEQA), respectively, with acceptable precision (< 6.1 % for membrane to membrane reproducibility) and recovery from influent water (95 % - 111 %). Then, the proposed method was applied to study the occurrence and distribution of the target compounds in a wastewater treatment plant. The presence of methamphetamine, ketamine, and methaqualone was confirmed and their concentrations in the influent sample were 57 ± 8, 40 ± 4, and 75 ± 2 ng L^-1, respectively. The speciation of the target compounds in different ponds was also investigated. Results showed that the content of organic matter and the pH of the sample significantly affected the binding state of the compounds. This work provides an efficient and accurate analytical protocol for WBE investigation of illicit drugs.

Research needs for optimising wastewater-based epidemiology monitoring for public health protection

Wastewater-based epidemiology (WBE) is an unobtrusive method used to observe patterns in illicit drug use, poliovirus, and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). The pandemic and need for surveillance measures have led to the rapid acceleration of WBE research and development globally. With the infrastructure available to monitor SARS-CoV-2 from wastewater in 58 countries globally, there is potential to expand targets and applications for public health protection, such as other viral pathogens, antimicrobial resistance (AMR), pharmaceutical consumption, or exposure to chemical pollutants. Some applications have been explored in academic research but are not used to inform public health decision-making. We reflect on the current knowledge of WBE for these applications and identify barriers and opportunities for expanding beyond SARS-CoV-2. This paper critically reviews the applications of WBE for public health and identifies the important research gaps for WBE to be a useful tool in public health. It considers possible uses for pathogenic viruses, AMR, and chemicals. It summarises the current evidence on the following: (1) the presence of markers in stool and urine; (2) environmental factors influencing persistence of markers in wastewater; (3) methods for sample collection and storage; (4) prospective methods for detection and quantification; (5) reducing uncertainties; and (6) further considerations for public health use.

Degradation of Triclosan in the Water Environment by Microorganisms: A Review

Triclosan (TCS), a kind of pharmaceuticals and personal care products (PPCPs), is widely used and has had a large production over years. It is an emerging pollutant in the water environment that has attracted global attention due to its toxic effects on organisms and aquatic ecosystems, and its concentrations in the water environment are expected to increase since the COVID-19 pandemic outbreak. Some researchers found that microbial degradation of TCS is an environmentally sustainable technique that results in the mineralization of large amounts of organic pollutants without toxic by-products. In this review, we focus on the fate of TCS in the water environment, the diversity of TCS-degrading microorganisms, biodegradation pathways and molecular mechanisms, in order to provide a reference for the efficient degradation of TCS and other PPCPs by microorganisms.

Transformation and fate of pharmaceuticals, personal care products, and per- and polyfluoroalkyl substances during aerobic digestion of anaerobically digested sludge

Post-anaerobic aerobic digestion (PAAD) is a promising strategy to further reduce the volume and improve the quality of anaerobically digested sludge (ADS). However, the effect of PAAD process on the fate of pharmaceuticals and personal care products (PPCPs) and per- and polyfluoroalkyl substances (PFAS) remains largely unknown. In this study, fourteen PPCPs and fifteen PFAS were detected in ADS and evaluated regarding their fate and transformation in a laboratory aerobic digester operated with a hydraulic retention time of 13 days under 22 ℃. Twelve PPCPs demonstrated significant (p < 0.05) decrease in their total concentrations (dissolved and adsorbed fractions combined) with six compounds presenting substantial transformation (> 80%) after aerobic digestion. On the contrary, PFAS were not removed and their concentrations were either increased (increasing ratio: 91 - 571%) or consistent in the sludge during PAAD process, suggesting their recalcitrance to post aerobic digestion. More than half of PPCPs and PFAS demonstrated medium to strong sorption onto solids with their solid fraction higher than 50% in the ADS. After PAAD process, sorption of four PPCPs and three PFAAs to solids was enhanced in sludge.

Pilot monitoring scheme of water pollutants in Important Bird and Biodiversity Areas

In this study we have established a monitoring scheme to determine the presence and distribution of widely used pharmaceuticals, pesticides, organophosphate esters (OPEs) and perfluoroalkyl substances (PFAS) in water bodies from Important Bird and Biodiversity Areas (IBAs) from Spain. The monitoring scheme included the georeferenced sampling of rocky mountain, Atlantic forest, riparian forest, Mediterranean forest, agricultural, inland aquatic and coastal aquatic IBAs, with the aim to evaluate the impact of widely used chemicals in those aquatic resources. Water samples were extracted using a generic solid-phase extraction protocol and analyzed by 3 analytical methods based on liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Quality parameters such as compound recovery, intra and inter-day variation, linearity and limits of detection were calculated in order to validate the methods. In addition, the ionization conditions and the optimization of the most appropriate transitions permitted unequivocal identification. Once the sampling and analytical procedure was set-up, 59 target compounds were monitored in 63 samples. Pharmaceutical, followed by pesticides, OPEs and PFAS were widespread along all IBAs studied at concentrations from 0.5 to 41083 ng/L. Overall, this study highlights the need to monitor the presence of contaminants in areas of high ecological interest to contribute to pollution control and mitigation towards protection of biodiversity.

Analytical method to monitor contaminants of emerging concern in water and soil samples from a non-conventional wastewater treatment system

Nonconventional wastewater treatments, such as vegetation filters (VFs), are propitious systems to attenuate contaminants of emerging concern (CECs) in small municipalities. The development of standardised multiresidue and multimatrix methods suitable for measuring a reliable number of CEC in environmental samples is crucial for monitoring infiltrating concentrations and for ensuring these systems' treatment capacity. The objective of this study is to develop and validate an analytical method for the simultaneous determination of CECs, including transformation products (TPs), with diverse physico-chemical properties, in environmental samples. The optimised method is based on sample clean-up and preconcentration by solid-phase extraction (SPE), followed by liquid chromatography electrospray ionization tandem mass spectrometry (LC-MS/MS). The method is able to detect and quantify 40 target CECs, including pharmaceuticals of different classes (analgesics, antibiotics, antihypertensives, lipid regulators, anticonvulsants, antidepressants, antiarrhythmics, beta-blockers, amongst others), hormones and lifestyle products with good reproducibility (variations below 23%), in different water matrices, and 28 CECs, in soil samples. Acceptable recoveries (65-120%) were obtained for most of the CECs in all the matrices. However in the soil samples, as complexity required a prior extraction treatment, the recovery of some analytes was affected, which reduced the number of target CECs. The achieved methodological quantification limits (0.05-5 ng/L and 0.04-1.1 ng/g levels for the water and the soil matrices, respectively) were reasonably low for most CECs. The proposed method was successfully applied to monitor CECs in a VF. The CECs detected at higher concentrations are some of the world's most widely used products (e.g. acetaminophen or caffeine and its main TP, paraxanthine). The results showed an almost 70% reduction in CEC concentrations during infiltration. The groundwater data indicated that the VF treatment operation did not affect the underlying aquifer (Cmax found in GW <1 µg/L).

Pharmaceutical compounds used in the COVID-19 pandemic: A review of their presence in water and treatment techniques for their elimination

During the COVID-19 pandemic, high consumption of antivirals, antibiotics, antiparasitics, antiprotozoals, and glucocorticoids used in the treatment of this virus has been reported. Conventional treatment systems fail to efficiently remove these contaminants from water, becoming an emerging concern from the environmental field. Therefore, the objective of the present work is to address the current state of the literature on the presence and removal processes of these drugs from water bodies. It was found that the concentration of most of the drugs used in the treatment of COVID-19 increased during the pandemic in water bodies. Before the pandemic, Azithromycin concentrations in surface waters were reported to be in the order of 4.3 ng L^-1, and during the pandemic, they increased up to 935 ng L^-1. Laboratory scale studies conclude that adsorption and advanced oxidation processes (AOPs) can be effective in the removal of these drugs. Up to more than 80% removal of Azithromycin, Chloroquine, Ivermectin, and Dexamethasone in aqueous solutions have been reported using these processes. Pilot-scale tests achieved 100% removal of Azithromycin from hospital wastewater by adsorption with powdered activated carbon. At full scale, treatment plants supplemented with ozonation and artificial wetlands removed all Favipiravir and Azithromycin, respectively. It should be noted that hybrid technologies can improve removal rates, process kinetics, and treatment cost. Consequently, the development of new materials that can act synergistically in technically and economically sustainable treatments is required.

Assessment of the occurrence of 455 pharmaceutical compounds in sludge according to their physical and chemical properties: A review

Sludge agronomical reuse is of major interest due to the beneficial contribution of nutrients. However, it implies the introduction of unregulated pharmaceuticals into amended-soils and creates a controversial issue about sludge management. To limit their dissemination, it is essential to identify the compounds of interest and understand their attenuation mechanisms through the sludge processes. This paper summarizes the knowledge on 455 investigated pharmaceuticals among 32 therapeutical categories in amendable sludge matrices. It contributes to enlarging the list of commonly quantified compounds to 305 residues including 84 additional compounds compared to previous reviews. It highlights that sorption appears as the main mechanism controlling the occurrence of pharmaceuticals in sludge matrices and shows the considerable residual levels of pharmaceuticals reaching several mg/kg in dry weight. Antibiotics, stimulants, and antidepressants show the highest concentrations up to 232 mg/kg, while diuretics, anti-anxieties or anticoagulants present the lowest concentrations reaching up to 686 µg/kg. Collected data show the increase in investigated compounds as antifungals or antihistamines, and underline emerging categories like antidiabetics, antivirals, or antiarrhythmics. The in-depth analysis of the substantial database guides onto the pharmaceuticals that are the most likely to occur in these amendable matrices to assist future research.

Coupling suspect and non-target analytical methods for screening organic contaminants of concern in agricultural & urban impacted waters: Optimization and application

Long-term exposure of contaminants to emerging concern (CECs) may pose risks to human health and ecosystems, even at low concentrations. Rivers impacted by both agricultural and urban activities experience distinctive environmental pressures due to receiving wastewaters that contain complex organics and their transformation products (TPs). In this study, we developed a regional database composed of 1200 CECs of high concern in Guangxi (South China). Further, we optimized a comprehensive analytical method for simultaneously screening for CECs and their TPs. The optimized screening method was applied to surface waters sampled from 10 different cross sections of a river that is impacted by both agricultural and urban activities. The best results of method optimization were achieved when the screening detection limit (SDL) ranged from 0.05 to 2 ng L^-1, and over 90% of the analytes had acceptable recovery rates ranging between 64.7% and 95.6% (RSD < 11%). Of the 1200 CECs contained in the regional database, 168 were detected in at least one sampling site of the studied river via suspect screening, and among them, 36 contaminants were found at all sampling sites. Also, 58 additional contaminants and 39 TPs were tentatively identified via non-target screening, among which 4 TPs were reported for the first time in the aquatic environment. Triazine herbicides and their TPs were identified at most of the sampling sites, with ametryn and atrazine posing relatively high risks in the river ecosystems. Furthermore, 31 known analytes were selected as standards in order to confirm the combined screening method; one false positive occurred in the non-target screening method. According to these results, the suspect screening strategy provides valuable confirmation for the identification of a wide range of CECs in water, while non-target screening can provide a reference for researchers and supplement the regional database, particularly in the study of TPs.

Synthetic surfactants in Swiss sewage sludges: Analytical challenges, concentrations and per capita loads

Surfactants are high-production-volume chemicals that are among the most abundant organic pollutants in municipal wastewater. In this study, sewage sludge samples of 36 Swiss wastewater treatment plants (WWTPs), serving 32% of the country's population, were analyzed for major surfactant classes by liquid chromatography mass spectrometry (LC-MS). The analyses required a variety of complementary approaches due to different analytical challenges, including matrix effects (which can affect adduct ion formation) and the lack of reference standards. The most abundant contaminants were linear alkylbenzene sulfonates (LAS; weighted mean [WM] concentration of 3700 μg g^-1 dry weight), followed by secondary alkane sulfonates (SAS; 190 μg g^-1). Alcohol polyethoxylates (AEO; 8.3 μg g^-1), nonylphenol polyethoxylates (NPEO; 16 μg g^-1), nonylphenol (NP; 3.1 μg g^-1), nonylphenol ethoxy carboxylates (NPEC; 0.35 μg g^-1) and tert-octylphenol (tert-OP, 1.8 μg g^-1) were present at much lower concentrations. This concentration pattern agrees with the production volumes of the surfactants and their fates in WWTPs. Branched AEO homologues dominated over linear homologues, probably due to higher persistence. Sludge concentrations of LAS, SAS, and NP were positively correlated with the residence time in the anaerobic digester. Derivation of the per capita loads successfully revealed potential industrial/commercial emission sources. Comparison of recent versus historic data showed a decrease in NPEO and NP levels by one or two orders of magnitude since their ban in the 1980s. By contrast, LAS still exhibit similar concentrations compared to 30 years ago.

Adsorption of a diverse range of pharmaceuticals to polyethylene microplastics in wastewater and their desorption in environmental matrices

It is proposed that microplastics discharged from wastewater treatment plants act as a vector of pharmaceuticals. In this study, adsorption of pharmaceuticals to polyethylene microplastics was investigated in municipal wastewater. Pharmaceuticals for study were selected to represent different speciation (anionic, cationic, and neutral) and a range of pH dependant octanol-water distribution coefficients (log D_OW). Findings revealed adsorption favoured those in cationic form with the greatest hydrophobicity (e.g., fluoxetine log D_OW 2.0 at pH 7.8). Adsorption of anionic pharmaceuticals was restricted due to repulsion with the microplastic's negatively charged surface. Only atorvastatin had any appreciable adsorption due to its comparatively high log D_OW value (2.9). Those pharmaceuticals predominantly in neutral form (carbamazepine and ketamine) with log D_OW values ≥2.4 had similar adsorption. Freundlich K_F values were 3400, 386, 284, 259 and 218 (mg kg^-1)(mg L^-1)^1/n for fluoxetine, propranolol, atorvastatin, ketamine, and carbamazepine, respectively. All pharmaceuticals with log D_OW values <1.0 (atenolol, gliclazide, bezafibrate, and ifosfamide) did not adsorb to microplastics, irrespective of their speciation. Changing composition of wastewater (pH, dilution with stormwater and NaCl addition) within the range expected for municipal wastewater had limited influence on adsorption. Pharmaceutical desorption from microplastics was assessed in river water and simulated gastric and intestinal fluids. Solution pH was considered the most important factor for pharmaceutical desorption, influencing both pharmaceutical speciation and microplastic surface charge. Greatest desorption was observed for the cationic pharmaceuticals in gastric fluids due to a reduced surface charge of the microplastics under low pH conditions. Up to 50% desorption of fluoxetine occurred in gastric fluid at 37 °C. These findings show that pharmaceuticals adsorbed to microplastics are 'bioavailable'. However, this is often overlooked as an exposure route to aquatic organisms because water samples are normally pre-filtered prior to chemical analysis.

Micropollutant transformation and toxicity: Electrochemical ozonation versus biological metabolism

Environmental water sources are constantly polluted by anthropogenic compounds, not always minimized by conventional water treatment methods to remove these compounds at the micro- and nano-range. The absolute concentrations of a suite of seven representative environmental micropollutants were compared pre- and post-treatment with both ozone and microbial biofilms, in terms of removal efficiencies and toxicity assays. Both synthetic micropollutant mixes and environmental water samples were evaluated. The study started with two representative micropollutants (carbamazepine, CBZ, and sulfamethoxazole, SMX), and broadened into a suite of pollutants, evaluating whole-sample eco-toxicological footprints. An ozone concentration of 4.24 ± 0.27 mg/L in tap water, resulted in an 87.9% and 96.5% removal of CBZ and SMX, respectively, within 1 min. Despite almost immediate removal of parent micropollutants by oxidation, endocrine disruption potential (anti-estrogenicity) of CBZ and SMX required up to 240 min of ozone treatment to show no assay effect. A broader suite of micropollutants in more complex environmental matrices showed scavenging of ozone (2.95 ± 0.17–0.25 ± 0.03 mg/L) and varying micropollutant recalcitrance to oxidation. Lower matrix pollution led to lower reduction in eco-toxicity. Microbial degradation of CBZ and SMX (56% and 70% versus 19% and 79%, respectively, in duplicate biofilms) by nutrient-limited biofilms showed less removal than ozonation, with marked variation due to the stochastic nature of biofilm sloughing. Microbial degradation of CBZ and SMX resulted in an increase of >90% in both estrogenicity and Aliivibrio inhibition. The results obtained from this study address a gap in understanding the removal efficiency of micropollutants, where the removal process often receives more attention than the comparative reduction of toxicological effects. This shift from a controlled laboratory environment to real-world scenarios also provided comparative insights into the removal of micropollutants and the eco-toxicity of the transformation by-products of each process.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

A Simple and Rapid Ultra-High-Performance Liquid Chromatography-Tandem Mass Spectrometry Method for the Quantitation of Pharmaceuticals and Related Compounds in Mussels and Oysters

A simple, rapid ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method has been developed and optimized for the quantitation of a range of pharmaceuticals, metabolites, and related bioactive compounds in the bivalve mollusc species mussels (Mytilus edulis) and Pacific oysters (Crassostrea gigas). Shellfish tissues were extracted using a simple solvent-based extraction method prior to concentration and purification by pass-through solid-phase extraction and quantified using stable isotope dilution MS/MS. The analytes covered a range of therapeutic classes including antidepressants, anticonvulsants, beta-blockers, and antiplatelets. Of the 34 compounds included in the present study initially, 28 compounds were found to demonstrate acceptable performance. Performance was assessed by examining extraction efficiencies, matrix effects, sensitivity, and within- and between-batch precision. The results show that as indicated by acceptable HorRat and accuracy values, the method is fit for purpose. Application of this method to environmental mussel and oyster samples revealed the presence of 12 compounds at quantifiable concentrations, with the antidepressant sertraline being present at the highest level, reaching a concentration of 6.12 ng/g in mussel tissue. © 2021 Crown copyright. Environmental Toxicology and Chemistry 2021;40:3263-3274. © 2021 SETAC. This article is published with the permission of the Controller of HMSO and the Queen's Printer for Scotland.

Spatial and seasonal variations of endocrine disrupting compounds in water and sediment samples of Markman Canal and Swartkops River Estuary, South Africa and their ecological risk assessment

The presence of pharmaceuticals in surface water and sediment has sparked up a global concern, as they could cause harm to human health. In this study, we investigated five pharmaceuticals (caffeine, carbamazepine, sulfamethoxazole, testosterone, and trimethoprim) in surface water and sediment samples from Swartkops River Estuary and Markman Stormwater Canal, in the Eastern Cape Province, South Africa. Ultra-Performance Liquid Chromatography (UPLC) systems coupled with a hyphenated quadrupole-time-of-flight mass spectrometry (QTOF-MS) was used for the analysis. Of the five pharmaceuticals investigated, three were detected in sediment samples at concentrations ranging from BDL - 23.86 μg/kg (dw). Caffeine and sulfamethoxazole were below the detection limit. The finding of this current study suggests that Markman and Motherwell's stormwater canals were potential contributors to pollution in Swartkops River Estuary. Ecotoxicity risk assessment indicated that trimethoprim and carbamazepine could constitute potential risk to aquatic organisms in Markman Canal and Swartkops Estuary, suggesting the need for proper control measure to prevent the pollution from toxicants in aquatic resources.

Pharmaceutical Compounds in Aquatic Environments-Occurrence, Fate and Bioremediation Prospective

Various contaminants of emerging concern (CECs) have been detected in different ecosystems, posing a threat to living organisms and the environment. Pharmaceuticals are among the many CECs that enter the environment through different pathways, with wastewater treatment plants being the main input of these pollutants. Several technologies for the removal of these pollutants have been developed through the years, but there is still a lack of sustainable technologies suitable for being applied in natural environments. In this regard, solutions based on natural biological processes are attractive for the recovery of contaminated environments. Bioremediation is one of these natural-based solutions and takes advantage of the capacity of microorganisms to degrade different organic pollutants. Degradation of pollutants by native microorganisms is already known to be an important detoxification mechanism that is involved in natural attenuation processes that occur in the environment. Thus, bioremediation technologies based on the selection of natural degrading bacteria seem to be a promising clean-up technology suitable for application in natural environments. In this review, an overview of the occurrence and fate of pharmaceuticals is carried out, in which bioremediation tools are explored for the removal of these pollutants from impacted environments.

Techniques for the detection and quantification of emerging contaminants

In recent years, the diverse industrial practices and human inputs widely disseminated emerging contaminants (ECs) throughout environmental matrices, which is of great concern. Even at low concentrations, ECs pose major ecological problems and threaten human health and the environment’s biota. Consequently, people’s interest and concerns on the widespread dissemination of environmentally connected ECs of great concern as developed due to their scientific understanding, technical innovation, and socioeconomic awareness. Increased detection of contaminants may occur from climatic, socioeconomic, and demographic changes and the growing sensitivity of analytical techniques. Hence, this article reviews the determination of ECs in ecological specimens, from aquatic setup (river water, marine water, and wastewater), sludge, soil, sediment, and air. Sample collection and the quality measures are summarized. The preparation of samples, including extraction and cleanup and the subsequent instrumental analysis of ECs, are all covered. Traditional and recent extraction and cleanup applications to analyze ECs in samples are reviewed here in this paper. The detection and quantification of ECs using gas chromatography (GC) and liquid chromatography (LC) linked with various detectors, particularly mass spectrometry (MS), is also summarized and explored, as are other possible techniques. This study aims to give readers a more excellent knowledge of how new and improved approaches are being developed and serve as a resource for researchers looking for the best method for detecting ECs in their studies.

Phenolic compounds in surface water: methodology and occurrence in Doce River, Brazil

Phenolic compounds are widely spread in surface water, mainly in developing countries, where sewage and wastewater treatment are still reduced. Thus, this work quantified these pollutants in the Doce River analyzing the associated risk for the environment and human health. This river is in the state of Minas Gerais in Brazil and was recently impacted by the collapse of a mining dam that compromised the resilience of the entire watershed. For that purpose, a methodology for simultaneous identification and quantification of 17 different phenols was developed. It was possible to verify phenolic compounds' occurrence with concentration ranging from 0.13 to 24.16 µg·L^-1. 2-Nitrophenol and bisphenol A appeared in all samples analyzed. The analytical method was processed using solid-phase extraction (SPE) (C₁₈ cartridge), gas chromatography with FID, and mass spectrometry to define the analytes' retention time. For case validation, the selectivity, linearity, detection and quantification limits, sensitivity, precision, accuracy, resolution, matrix effect, and peak quality were assessed. Four different solvents were tested in the recovery-grade trials, which were dichloromethane, methanol, acetonitrile, and ethyl acetate. Among them, methanol had a better performance and was used throughout all analyses. The phenolic compounds had a recovery degree higher than 50% after SPE, regardless of the matrices.