Spatio-temporal distribution, source, and genotoxic potential of polycyclic aromatic hydrocarbons in estuarine and riverine sediments from southern India

Polycyclic aromatic hydrocarbons in ship breaking area and associated ecological risk assessment: evidence from the Sitakund ship-breaking area in Bangladesh

Ship-breaking yards are recognized for releasing hazardous polycyclic aromatic hydrocarbons (PAHs), leading to severe environmental pollution in the sediment of ship-breaking areas. This study assessed the concentrations of 16 priority PAHs in surface sediments collected from the intertidal zone adjacent to the Sitakund ship-breaking yards. The samples underwent Soxhlet extraction and detection using PerkinElmer GC-Clarus 690 and MS-Clarus SQ8C with an Elite-5MS capillary column (30 m × 0.25 mm ID × 0.25 µm). The study utilized PAH concentrations to reveal spatial distribution patterns, identify point sources, and assess potential toxicity. The total PAH concentration ranged from 1899.2 to 156,800.08 ng g-1 dw, while the concentration of 7 carcinogenic PAHs ranged from 822.03 to 1899.15 ng g-1 dw. High molecular weight PAHs dominated among the 16 PAHs, whereas low molecular weight PAHs, such as 2-ring PAHs, were negligible. Source characterization based on different molecular ratios suggested that PAHs in the area originated from pyrolytic processes related to ship dismantling, fishing activities, and water transportation for people. The observed PAH concentrations exceeded both national and international standards for sedimentary PAH levels, indicating significant ecological risks. The total TEQcarc values of sediment samples varied from 564.41 to 10,695.12 ng g-1, with a mean value of 3091.25 ng g-1. The study's findings underscore the immediate biological damage that PAH contamination in the Sitakund ship-breaking area could cause, emphasizing the need for effective control measures to ensure ecological and human safety.

Evaluation of the Different Nutritional and Environmental Parameters on Microbial Pyrene Degradation by Mangrove Culturable Bacteria

Mangrove ecosystems play curial roles in providing many ecological services and alleviating global climate change. However, they are in decline globally, mainly threatened by human activities and global warming, and organic pollutants, especially PAHs, are among the crucial reasons. Microbial remediation is a cost-effective and environmentally friendly way of alleviating PAH contamination. Therefore, understanding the effects of environmental and nutritional parameters on the biodegradation of polycyclic aromatic hydrocarbons (PAHs) is significant for the bioremediation of PAH contamination. In the present study, five bacterial strains, designated as Bp1 (Genus Rhodococcus), Sp8 (Genus Nitratireductor), Sp13 (Genus Marinobacter), Sp23 (Genus Pseudonocardia), and Sp24 (Genus Mycolicibacterium), have been isolated from mangrove sediment and their ring hydroxylating dioxygenase (RHD) genes have been successfully amplified. Afterward, their degradation abilities were comprehensively evaluated under normal cultural (monoculture and co-culture) and different nutritional (tryptone, yeast extract, peptone, glucose, sucrose, and NPK fertilizer) and environmental (cetyl trimethyl ammonium bromide (CTAB), sodium dodecyl sulfate (SDS)) parameters, as well with different co-contaminants (phenanthrene and naphthalene) and heavy metals (Cd²⁺, Cu²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and Co²⁺). The results showed that strain Sp24 had the highest pyrene degradation rate (85%) in the monoculture experiment after being cultured for 15 days. Adding nitrogen- and carbon-rich sources, including tryptone, peptone, and yeast extract, generally endorsed pyrene degradation. In contrast, the effects of carbon sources (glucose and sucrose) on pyrene degradation were distinct for different bacterial strains. Furthermore, the addition of NPK fertilizer, SDS, Tween-80, phenanthrene, and naphthalene enhanced the bacterial abilities of pyrene removal significantly (p < 0.05). Heavy metals significantly reduced all bacterial isolates' degradation potentials (p < 0.05). The bacterial consortia containing high bio-surfactant-producing strains showed substantially higher pyrene degradation. Moreover, the consortia of three and five bacterial strains showed more degradation efficiency than those of two bacterial strains. These results provide helpful microbial resources for mangrove ecological remediation and insight into optimized culture strategies for the microbial degradation of PAHs.

Levels and sources of hydrocarbons in the Patos Lagoon estuary and Cassino Beach mud bank (South Atlantic, Brazil): evidence of transference between environments

This study assessed the concentrations and sources of natural and anthropogenic aliphatic (AHs) and polycyclic aromatic hydrocarbons (PAHs) in superficial sediments collected along the Patos Lagoon estuary and in sediment cores obtained from the Cassino Beach mud bank. Levels and distribution of n-alkanes indicate terrestrial sources, overlapping with a low amount of petrogenic hydrocarbons (heavy oils). Unresolved complex mixture (UCM) was observed in all samples. On the other hand, the distribution of PAHs in the sediments showed a predominance of pyrolytic over petrogenic sources. In general, hydrocarbons (HCs) contamination in the Patos Lagoon estuary and its adjacent coastal area can be considered low, except for sites near urban or industrial effluents, where moderate to high levels of contamination were found. Concentrations of hydrocarbons were homogeneous throughout the sediment cores, suggesting that mixing processes may have occurred along the layers or that HCs inputs to the mud banks were uniform during the studied deposition period. In addition, the levels and profile of HCs in the coastal sediments were similar to those observed in the estuary. Moreover, the frequent remobilization of sediments from the mud bank towards Cassino beach does not seem to pose any threats to the local biota or beach users since the levels of contamination were relatively low and below the threshold limits of sediment quality guidelines.

Construction of bifunctional bacterial community for co-contamination remediation: Pyrene biodegradation and cadmium biomineralization

Polycyclic aromatic hydrocarbons and heavy metals are typical pollutants in the non-ferrous metal smelting industry. The combination of biodegradation and biomineralization has great development potential for co-contamination removal as an environmentally friendly method. Pyrene (Pyr) and cadmium (Cd) were regarded as model pollutants of co-contamination in this study. A bifunctional bacterial community named Ycp was screened from a non-ferrous smelting slag field soil. The 16S rRNA gene high throughput sequencing analysis showed that Enterobacter was the dominant genus (99.1%). Ycp had adaptability under a wide range of environmental conditions (pH 3-9, salinity 0-10 g L^-1 NaCl, Pyr concentration 0-50 mg L^-1, Cd concentration 0-100 mg L^-1), and the removal rate of Pyr and Cd reached 41.8%-76.9%, 82.8%-98.8%, respectively. It was found that compound carbon sources had promoting effect on the removal of Pyr and Cd, with the maximum removal rate of 88.3% and 98.0%. According to the degradation products of Pyr by LC-MS analysis and the mineralized products of Cd²⁺ by XRD and SEM-EDS analysis, the mechanism of Ycp for co-contamination remediation was: Ycp biodegraded Pyr through salicylic acid and phthalic acid metabolic pathways, and biomineralized Cd²⁺ into CdCO₃ through microbially induced carbonate precipitation. This study provided a basis for microbial remediation of co-contamination.

Review on the contamination and remediation of polycyclic aromatic hydrocarbons (PAHs) in coastal soil and sediments

The rapid economic and population growth in coastal areas is causing increasingly serious polycyclic aromatic hydrocarbons (PAHs) pollution in these regions. This review compared the PAHs pollution characteristics of different coastal areas, including industrial zones, commercial ports, touristic cities, aquacultural & agricultural areas, oil & gas exploitation areas and megacities. Currently there are various treatment methods to remediate soils and sediments contaminated with PAHs. However, it is necessary to provide a comprehensive overview of all the available remediation technologies up to date, so appropriate technologies can be selected to remediate PAHs pollution. In view of that, we analyzed the characteristics of the remediation mechanism, summarized the remediation methods for soil or sediments in coastal areas, which were physical repair, chemical oxidation, bioremediation and integrated approaches. Besides, this review also reported the development of new multi-functional green and sustainable systems, namely, micro-nano bubble (MNB), biochar, reversible surfactants and peracetic acid. While physical repair, expensive but efficient, was regarded as a suitable method for the PAHs remediation in coastal areas because of land shortage, integrated approaches would produce better results. The ultimate aim of the review was to ensure the successful restructuring of PAHs contaminated soil and sediments in coastal areas. Due to the environment heterogeneity, PAHs pollution in coastal areas remains as a daunting challenge. Therefore, new and suitable technologies are still needed to address the environmental issue.

Occurrence, distribution, and ecological risk assessment of emerging and legacy contaminants in the Kadicha river in Lebanon

The Kadicha river basin in Northern Lebanon is an illustrative example of multiple pressures encountered in the Mediterranean region: it is a small coastal river affected by rapid urbanization, population growth (drastically impacted by the influx of Syrian refugees), and a chronic default of wastewater treatment. In this context, multiple classes of contaminants may attain the river accumulating in sediment. However, very little information is available in the literature on the contamination status in such stressed Mediterranean contexts. This study proposed a first contamination evaluation of a small Mediterranean river submitted to multiple pressures. Two sediment sampling campaigns along sites impacted by increasing urban gradient within the Kadicha river basin were performed to determine the occurrence and the environmental risks of both emerging and legacy contaminants. The results revealed the detection of the 41 studied compounds. The highest concentrations were attained by PAHs and polycyclic musks (up to 311.79, 94.22, and 81.13 ng/g of dry weight for PAH, cashmeran, and galaxolide, respectively). The discontinuous urbanized upstream area and the estuary were the most contaminated areas of the river. An environmental risk assessment showed a hazard quotient (HQ) higher than 1 for both legacy and emerging compounds (EHMC and 4-MBC), indicating a potential risk to benthic species. Monitoring campaigns and implementation of wastewater treatment plants should be encouraged as the anthropogenic pressure on small Mediterranean rivers will increase over the years.

Estimation of total flux of polycyclic aromatic hydrocarbons facilitated by methane ebullition into water column from global lake sediments

Methane ebullition and contamination are two typical characteristics from lakes, however, these two are generally studied independently. In fact, the exchange of matter and energy between methane bubbles and their surrounding environment can be very active to enhance the contaminant transport. There is limited research on understanding the characteristics and trends of gas ebullition facilitated contaminant emissions in large areas considering water and air as receptors. We herein estimate the transport capacity of methane ebullition for polycyclic aromatic hydrocarbons (PAHs) out of the sediment from global lakes, which may reach an average of 71 (up to 159) t yr^-1. Methane bubbles could transfer one third of the total PAH flux from sediments, or equivalent of 1.3-3.0 ng L^-1 of additional PAHs, into the water column with the rest going into air, offsetting from 52 to 118% of dry PAH deposition flux into global lakes sediment per year. Given the PAH concentration in lake water is often in the range of 0.1-100 ng L^-1, ebullition facilitated PAH flux may increase PAH concentration by a factor of 1.4 to 2.4 until 2,100, being a significant contributor for the PAH increment in lake waters.

Assessment of persistent organic pollutants in soil and sediments from an urbanized flood plain area

Polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and phenolic compounds (PCs) are persistent organic compounds. Contamination of these potentially toxic organic pollutants in soils and sediments is most studied environmental compartments. In recent past, studies were carried out on PAHs, OCPs and PCs in various soils and sediments in India. But, this is the first study on these pollutants in soils and sediments from an urbanized river flood plain area in Delhi, India. During 2018, a total of fifty-four samples including twenty-seven each of soil and sediment were collected and analyzed for thirteen priority PAHs, four OCPs and six PCs. The detected concentration of ∑PAHs, ∑OCPs and ∑PCs in soils ranged between 473 and 1132, 13 and 41, and 639 and 2112 µg/kg, respectively, while their concentrations in sediments ranged between 1685 and 4010, 4.2 and 47, and 553 and 20,983 µg/kg, respectively. PAHs with 4-aromatic rings were the dominant compounds, accounting for 51 and 76% of total PAHs in soils and sediments, respectively. The contribution of seven carcinogen PAHs (7CPAHs) in soils and sediments accounted for 43% and 61%, respectively, to ∑PAHs. Among OCPs, p, p'-DDT was the dominant compound in soils, while α-HCH was found to be dominated in sediments. The concentrations of ∑CPs (chlorophenols) were dominated over ∑NPs (nitrophenols) in both the matrices. Various diagnostic tools were applied for the identification of their possible sources in soil and sediments. The observed concentrations of PAHs, OCPs and PCs were more or less comparable with the recently reports from various locations around the world including India. Soil quality guidelines and consensus-based sediment quality guidelines were applied for the assessment of ecotoxicological health effect.

Century-long record of polycyclic aromatic hydrocarbons from tree rings in the southeastern Tibetan Plateau

Limited studies have been carried out on the historical variations of atmospheric polycyclic aromatic hydrocarbons (PAHs), especially in remote regions of the world. In this study, century-long record of PAHs (1916-2018) were reconstructed from tree rings in the remote southeastern Tibetan Plateau (TP). The total concentrations of 15 PAHs varied from 27.5 to 6.05 × 10² ng/g dry weight (dw), with a mean value of 1.40 × 10² ng/g dw. Higher levels of PAHs were observed during World War Ⅱ and the Peaceful Liberation of Tibet, and increasing trends were observed starting from rapid industrialization in India. Both the isomer ratios and the positive matrix factorization model results indicated biomass and coal combustion were the dominant sources of PAHs. The carcinogenic risk of PAHs to local residents was assessed, which might have been negligible in most past periods and lower than in other regions of the world. Nevertheless, since the beginning of the 21st century, the cancer risk has been increasing year by year, indicating more actions are needed to reduce emissions of PAHs. This study provides an idea for reconstructing the pollution history of PAHs at the global scale.

Polycyclic aromatic hydrocarbons (PAHs) in urban stream sediments of Suzhou Industrial Park, an emerging eco-industrial park in China: Occurrence, sources and potential risk

In this study, urban stream sediment samples were collected in the Suzhou Industrial Park (SIP), one of the earliest national demonstration eco-industrial parks of China. PAHs were analyzed in these sediments, and concentrations of total PAHs were 180-81,000 ng g^-1 (5700 ± 14,000 ng g^-1). Medium molecular weight (4- ring) PAHs were predominant (42 ± 12%), followed by high molecular weight (5- and 6- ring) PAHs (31 ± 10%). No correlation was found between concentrations of PAHs and land uses of SIP in this study. Diagnostic ratios and a positive matrix factorization (PMF) model indicated that coal/biomass combustion might be the primary PAH source (61%), followed by non-combustion sources (21%) and vehicular emission (18%). According to the spatial analysis, PAHs in the sediments of SIP might be mainly associated with the coal/biomass combustion in the northeast industrial zone. Residential & commercial activities seem not to be the major causes of PAH contamination. Total PAH toxic equivalent concentrations, effect range low/effect range median values, and mean effects range-median quotient all showed that PAHs were present at a low toxicity risk level in most regions of the SIP. However, vigilance is required at some sampling sites with extremely high PAH concentrations or high mean effects range-median quotient.

Anthropogenic and natural inputs of polycyclic aromatic hydrocarbons in the sediment of three coastal systems of the Brazilian Amazon

Polycyclic aromatic hydrocarbons (PAHs) were measured in 32 surface sediment samples collected around three cities (Barcarena, Belém, and Santana) located on the coast of the Brazilian Amazon. The concentration of total PAHs ranged from lower than detection limit to 33,101 ng g-1 in a sample from Barcarena and was related to a large aluminum industrial complex and port activities. In Belém, which is the most populated area in the Amazon region, PAHs were probably derived from untreated sewage discharge and inputs from a large municipal landfill. Pyrogenic PAHs were predominant in both cities, with a smaller contribution of petrogenic PAHs. Low alkylated PAH levels may be associated with small boats and ship traffic. Santana had low total PAH concentrations, with a predominance of unusual alkylated PAHs, probably related to diagenetic transformations of organic matter in the sediment. In general, PAH concentrations in the samples were low and may reflect baseline levels for this Amazon estuarine system.

Removal of polycyclic aromatic hydrocarbon (PAH)-contaminated sediments by persulfate oxidation and determination of degradation product cytotoxicity based on HepG2 and ZF4 cell lines

This study evaluated the use of magnetite (Fe₃O₄), carbon black (CB), and Fe₃O₄-CB composites activated by persulfate (PS) at circumneutral pH to oxidize polycyclic aromatic hydrocarbons (PAHs) in marine sediments. In addition, the in vitro cytotoxic activity and apoptotic response of the obtained degradation products were investigated. Chemical analyses showed that the total PAH concentration was 26,263 ng/g for sediment samples from an industrial port area. Highly toxic BaP was the main contributor to the TEQ in sediments. Source analyses demonstrated that the PAHs in the sediment were derived from coal combustion. In this study, we found that the PS oxidation processes effectively degrade PAHs at concentration levels of 1.7 × 10^-5 M at pH 6.0. The 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay was employed to assess the cytotoxicity of the PAH degradation products before and after Fe₃O₄/PS, CB/PS, and Fe₃O₄-CB/PS oxidation treatment using a human hepatoma carcinoma cell line (HepG2) and a zebrafish (Danio rerio) embryonic cell line (ZF4). Each sample extract showed a marked dose-related response, with the cell viability reduced by 82% in the case of HepG2 and 58% in the case of ZF4 at 100 μg/mL after the Fe₃O₄-CB/PS process. The PAH degradation products had different effects on the cell morphologies of the two cell lines. The results suggested that the ZF4 cell model is more sensitive than HepG2 to the toxicity of the PAH samples.

Direct immersion single-drop microextraction of semi-volatile organic compounds in environmental samples: A review

Single-drop microextraction (SDME) techniques are efficient approaches to pretreatment of aqueous samples. The main advantage of SDME lies in the miniaturization of the solvent extraction process, minimizing the hazards associated with the use of toxic organic solvents. Thus, SDME techniques are cost-effective, and represent less harm to the environment, subscribing to green analytical chemistry principles. In practice, two main approaches can be used to perform SDME - direct immersion (DI)-SDME and headspace (HS)-SDME. Even though the DI-SDME has been shown to be quite effective for extraction and enrichment of various organic compounds, applications of DI-SDME are normally more suitable for moderately polar and non-polar semi-volatile organic compounds (SVOCs) using organic solvents which are immiscible with water. In this review, we present a historical overview and current advances in DI-SDME, including the common analytical tools which are usually coupled with DI-SDME. The review also focuses on applications concerning SVOCs in environmental samples. Currents trends in DI-SDME and possible future direction of the procedure are discussed.

Accumulation of halogenated polycyclic aromatic hydrocarbons by different tuna species, determined by high-resolution gas chromatography Orbitrap mass spectrometry

Halogenated polycyclic aromatic hydrocarbon (HPAH) concentrations in tissues from three tuna species Thunnus albacares (yellowfin tuna), Katsuwonus pelamis (skipjack tuna), and Auxis thazard (frigate tuna) were determined by high-resolution gas chromatography Orbitrap mass spectrometry. The tuna samples were collected from the Indian Ocean. The instrument conditions gave high mass accuracy at 0.9 m/z isolation width of the mass filter and a mass error of <±1.0 ppm for many HPAHs. A total of 29 of the 30 targets chlorinated PAHs (ClPAHs) and 20 of the 21 targets brominated PAHs (BrPAHs) were detected in the tuna muscle samples. The mean total ClPAH, BrPAH and PAH concentrations for tuna were 127.2, 156.6 and 682.8 ng/g lipid weight, respectively. The mean total ClPAH and BrPAH concentrations (ng/g lipid weight) in the tuna were considerably lower than that of PAH concentrations. The mean total ClPAH, BrPAH and PAH concentrations in T. albacares respectively were 185.8, 249.2 and 784.1 ng/g lipid weight, irrespective of the body sizes. The mean total ClPAH, BrPAH and PAH concentrations in K. pelamis respectively were 45.1, 24.8 and 555.6 ng/g lipid weight. The mean total ClPAH, BrPAH and PAH concentrations in A. thazard respectively were 34.09, 4.73 and 433.24 ng/g lipid weight. The total ClPAH concentrations and body weights significantly positively correlated for T. albacares. The mean total ClPAH concentration in white muscles was significantly higher (p < 0.05) for large than for small T. albacares. This suggests ClPAHs could bioaccumulate in T. albacares, possibly because they are poorly metabolized. The chlorinated phenanthrene and pyrene concentrations indicated tuna accumulate these compounds increasingly effectively as the tuna grow. This was the first time large numbers of HPAHs were found in biological samples. HPAHs may adversely affect the health of humans consuming tuna.

The distinct response of phenanthrene enriched bacterial consortia to different PAHs and their degradation potential: a mangrove sediment microcosm study

Understanding the microbial community succession to polycyclic aromatic hydrocarbons (PAHs) and identification of important degrading microbial groups are crucial for the designing of appropriate bioremediation strategies. In the present study, two distinct phenanthrene enriched bacterial consortia were treated against high molecular weight (Pyrene, Benzo (a) pyrene and Benzo (a) fluoranthene) and the response was studied in term of taxonomic variations by using High Throughput Illumina sequencing and qPCR analysis. Overall, the type of PAHs significantly affected the composition and the relative abundance of bacterial communities while no obvious difference was detected between bacterial communities of benzo (a) pyrene and benzo (a) fluoranthene treatments. Genera, Novosphingobium, Pseudomonas, Flavobacterium, Mycobacterium, Hoeflae, and Algoriphagus dominated all PAHs treatment groups indicating that they could be the key PAHs degrading phylotypes. Due to the higher abundance of gram-negative PAH-ring hydroxylating dioxygenase gene than that of gram-positive bacteria in all treated groups, we speculated that gram-negative bacteria may contribute more in the PAH degradation. The studied sediments harbored rich PAHs degrading bacterial assemblages involved in both low and high molecular weight PAHs and these findings provided new insight into the perspective of microbial PAHs bioremediation in the mangrove ecosystem.

Specific polycyclic aromatic hydrocarbons identified as ecological risk factors in the Lagos lagoon, Nigeria

The ecological risk assessment (ERA) of polycyclic aromatic hydrocarbons (PAHs) is imperative due to their ubiquity and biological effects in aquatic organisms. We evaluated the seasonal levels and ERA of 16 priority PAHs in surface water, sediment and fish from four (4) anthropogenic-impacted zones of the Lagos lagoon, Nigeria. PAHs were analysed using GC-FID and standard guidelines were utilized for the ERA. Also, we developed a sediment to water-PAHs ratio and ranking of PAHs for the ERA. The dominant fish species were Sarotherodon melanotheron (Black-Jawed Tilapia), Gerres melanopterus (Gerres), Liza falcipinnis (Sicklefin Mullet) and Pseudotolithus elongatus (Bobo Croaker) at Ilaje, Iddo, Atlas cove and Apapa zones respectively. The range of sum PAHs was 195-1006 μg L^-1, 302-1290 μg kg^-1 and 8.80-26.1 μg kg^-1 in surface water, sediment and fish species respectively. Naphthalene was dominant in the surface water and sediment samples while 3-ring to 4-ring PAHs were predominant in fish species across the zones and seasons. The sediment to water-PAHs ratio was greater than 1 for sum PAHs and significantly higher (p < 0.05) in the wet season for specific PAHs across the zones and seasons. On the basis of the sediment PAHs level, Apapa zone was highly polluted with frequent biological effects while the other zones were moderately polluted with occasional biological effects across the zones and seasons. Fish species from all zones were minimally contaminated in both seasons except S. melanotheron which was not contaminated. The specific PAHs identified as ecological risk factors in the lagoon and ranking based on 50-75% recurrence in the ERA were; naphthalene, acenaphthene > acenaphthylene, fluorene, pyrene and benzo[a]anthracene. We recommend that the specific PAHs identified should form the basis for the establishment of environmental quality standards for individual PAHs in coastal waters based on the UN sustainable development goal 14 (life below water).

Pollution and toxicity of sediment in potential dredging sites of the Marmara Sea, Turkey

This study aims to assess the impact of the sediment in the potential dredging areas of the Marmara Sea. To that aim, sediments were analyzed for polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and heavy metals, sources were discussed, and toxicity tests were applied. For assessment, lower and upper limits of Turkish draft regulation (L_TR, U_TR) and UNEP-MAP's guidance document (LCT, UCT), and effects range low and median (ERL, ERM) were used. Total concentrations were found between 562 and 8643 µg kg^-1 for PAHs, 4-36 µg kg^-1 for PCBs, and 14-190 µg kg^-1 for OCPs. The highest ∑PAH concentrations were measured in Golden Horn, and none of the PAH compounds was above ERM. ERL and UCT were exceeded in İstinye and Golden Horn stations. The highest ∑PCBs and ∑OCPs levels were determined in İzmit Bay (IB). ΣPCBs in IB were higher than ERL and L_TR, while ΣDDT were found above ERM and UCT. High concentrations of chromium (∼190 mg kg^-1) and copper (∼180 mg kg^-1) in Golden Horn and mercury in IB (∼4 mg kg^-1) were detected. The highest toxicities were observed in İstinye and İzmit Bay. According to the regulations, none of the sediments can be dumped.

Distribution of polycyclic aromatic hydrocarbons (PAHs) in commonly consumed seafood from coastal areas of Bangladesh and associated human health implications

Levels, distribution, possible sources and potential risks of 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs) were investigated comprehensively in frequently consumed seafood species collected from the coastal areas of Bangladesh. Samples were collected in winter and summer, 2015. The total concentration of PAHs (∑PAHs) in the examined seafood was 184.5-2806.6 ng/g wet weight (ww) in winter and 117.9-4216.8 ng/g ww in summer, respectively. The levels of ∑PAHs were comparable to or higher than those reported from other coastal areas. Seasonal variation was not significant for the majority of the monitored PAHs. Spatial distribution revealed that the seafood collected from areas with recent urbanization and industrialization (Chittagong, Cox's Bazar and Sundarbans) was more contaminated with PAHs than those from the unindustrialized area (Meghna Estuary). Low-molecular-weight isomers dominated the PAH composition. Molecular ratios suggested the abundance of mixed sources of PAHs in the Bangladeshi coastal areas with a slight imposition toward the petrogenic origin. A preliminary evaluation of human health risk indicated that the dietary PAH exposure from consumption of Bangladeshi seafood would certainly induce adverse health effects. This finding suggests the need to enhance risk management regarding seafood consumption through public advisory in Bangladesh.

Distribution, Source Apportionment, and Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in the Surficial Sediments from the Coastal Areas of Bangladesh

The surficial sediments were collected in winter and summer (2015) from the coastal areas of Bangladesh and analyzed for 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs). The total concentration of PAHs (∑PAHs) were 349.8-11,058.8 and 199.9-17,089.1 ng/g dry weight (dw) in winter and summer, respectively. Sediements from the areas with recent urbanization and industrialization (Chittagong, Cox's Bazar, and Sundarbans) were more contaminated with PAHs than the unindustrialized area (Meghna Estuary). The concentrations of ∑PAHs were slightly higher in summer than those in winter, but the seasonal variations were not statistically significant (p > 0.05). Molecular ratios suggested mixed sources of PAHs in the Bangladeshi coastal areas with a slight imposition of pyrolytic inputs closely related to shipping and fishing activities as well as industrial and municipal sewage discharge. According to ecological risk assessment, the measured levels of sedimentary PAHs exceeded some of the existing national and international environmental quality guidelines/standards, and thus might cause acute biological damage in the studied areas of the Bay of Bengal coast of Bangladesh.

Spatial distributions, source apportionment and ecological risk of SVOCs in water and sediment from Xijiang River, Pearl River Delta

Xijiang River is an important drinking water source in Guangxi Province, China. Along the Xijiang River and surrounding tributary, the pollution profile of three important groups of semi-volatile organic compounds, including polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and phthalate esters (PAEs), was analyzed. Relatively low levels of PAHs (64-3.7 × 10² ng L^-1) and OCPs (16-70 ng L^-1), but high levels of PAEs (7.9 × 10²-6.8 × 10³ ng L^-1) occurred in the water. Comparatively, low levels of OCPs (39-1.8 × 10² ng g^-1) and PAEs (21-81 ng g^-1), but high levels of PAHs (41-1.1 × 10³ ng g^-1) were found in sediment. Principal component analyses for source identification indicated petroleum-derived residues or coal and biomass combustion, and vehicular emission was the main sources for PAHs. The OCPs sources of each category were almost independent, whereas the new input of HCHs and p,p'-DDTs probably existed in some areas. PAEs were mainly originated from personal care products of urban sewage, plastic and other industrial sources. Ecological risk through the risk quotient analysis indicated a small or significant potential adverse effect on fish, daphnia and green algae. Nevertheless, the integrated risk of all pollutants should be taken into account in future study.

Depositional history of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polycyclic aromatic hydrocarbons (PAHs) in an Amazon estuary during the last century

The sources and depositional history of OCPs (organochlorine pesticides), PCBs (polychlorinated biphenyls) and PAHs (polycyclic aromatic hydrocarbons) over the last 100years were determined in two sediment cores collected in the Amazon region. It was possible to distinguish two depositional periods along the cores. The first period occurred before extensive anthropogenic effects were registered in the sediments. During this time interval, the concentrations of all OCPs and PCBs were below the detection limits (DL), and the PAH concentrations were low and essentially constant (58.19-124.28ngg^-1). The second period starts in the mid-1960s and reflects the increased human influence in the area. The concentrations of OCPs, PCBs, and PAHs increased towards the top of the cores, varying between <DL to 72.67ngg^-1, <DL to 0.87ngg^-1 and 331 to 2341ngg^-1, respectively. In general, OCP results showed trends corresponding to the production, usage and prohibition periods of POPs in Brazil. Compounds related to wood treatment, such HCHs and chlordanes, were predominant among the OCPs, which may be associated with many sawmills located in this region. The increase in PAH concentration after the 1960s is mainly due to forest fires, caused by the implementation of large-scale cattle ranches, which burned forests to create pastures. The background PAH concentrations before the 1960s are probably related to natural diagenetic processes.

Influence of land use configurations on river sediment pollution

Land use is an influential factor in river sediment pollution. However, land use type alone is found to be inadequate to explain pollutant contributions to the aquatic environment since configurations within the same land use type such as land cover and development layout could also exert an important influence. Consequently, this paper discusses a research study, which consisted of an in-depth investigation into the relationship between land use type and river sediment pollution by introducing robust parameters that represent configurations within the primary land use types. Urban water pollutants, namely, nutrients, total carbon, polycyclic aromatic hydrocarbons and metals were investigated in the study. The outcomes show that higher patch density and more diverse land use development forms contribute relatively greater pollutant loads to receiving waters and consequently leading to higher sediment pollution. The study outcomes are expected to contribute essential knowledge for creating robust management strategies to minimise waterway pollution and thereby protect the health of aquatic ecosystems.

Cancer Risk Assessment of Polycyclic Aromatic Hydrocarbons in the Soils and Sediments of India: A Meta-Analysis

A carcinogenic risk assessment of polycyclic aromatic hydrocarbons in soils and sediments was conducted using the probabilistic approach from a national perspective. Published monitoring data of polycyclic aromatic hydrocarbons present in soils and sediments at different study points across India were collected and converted to their corresponding BaP equivalent concentrations. These BaP equivalent concentrations were used to evaluate comprehensive cancer risk for two different age groups. Monte Carlo simulation and sensitivity analysis were applied to quantify uncertainties of risk estimation. The analysis denotes 90% cancer risk value of 1.770E-5 for children and 3.156E-5 for adults at heavily polluted site soils. Overall carcinogenic risks of polycyclic aromatic hydrocarbons in soils of India were mostly in acceptance limits. However, the food ingestion exposure route for sediments leads them to a highly risked zone. The 90% risk values from sediments are 7.863E-05 for children and 3.999E-04 for adults. Sensitivity analysis reveals exposure duration and relative skin adherence factor for soil as the most influential parameter of the assessment, followed by BaP equivalent concentration of polycyclic aromatic hydrocarbons. For sediments, biota to sediment accumulation factor of fish in terms of BaP is most sensitive on the total outcome, followed by BaP equivalent and exposure duration. Individual exposure route analysis showed dermal contact for soils and food ingestion for sediments as the main exposure pathway. Some specific locations such as surrounding areas of Bhavnagar, Raniganj, Sunderban, Raipur, and Delhi demand potential strategies of carcinogenic risk management and reduction. The current study is probably the first attempt to provide information on the carcinogenic risk of polycyclic aromatic hydrocarbons in soil and sediments across India.

Hierarchy of factors which influence polycyclic aromatic hydrocarbons (PAHs) distribution in river sediments

The sediment environment provides habitat for fauna and flora. As pollutants can interchange between water and sediments, pollution will exert a significant influence on the water environment. Previous studies on polycyclic aromatic hydrocarbon (PAHs) pollution of sediments have primarily focused on the comparison of concentrations between seasons, land uses and species. Studies on the identification of the hierarchy of factors which influence PAHs distribution and its variability in river sediments are limited. This paper discusses a comprehensive investigation into the inherent variability of PAHs in sediments and the primary factors which influence this variability. The study outcomes confirmed that key factors exerting influence on PAH distribution in sediments can be ranked in the order: land use > population > seasons. Accordingly, intensive urban land use was identified as the most important factor influencing PAHs distribution. Additionally, it was found that with increasing urban development, PAHs concentrations and their variability in sediments increase in terms of the molecular weight of different species. The study outcomes are expected to enhance management strategies to mitigate PAHs pollution of urban water environments including the prioritisation of factors requiring management and the selection of appropriate approaches in the context of cost-effectiveness.

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the "zero concept" of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.