The health significance of gas- and particle-phase terpene oxidation products: a review

Ozone Loss on Painted Surfaces: Dependence on Relative Humidity, Aging, and Exposure to Reactive SVOCs

Ozone and its oxidation products result in negative health effects when inhaled. Despite painted surfaces being the most abundant surface in indoor spaces, surface loss remains one of the largest uncertainties in the indoor ozone budget. Here, ozone uptake coefficients (γO3) on painted surfaces were measured in a flow-through reactor where 79% of the inner surfaces were removable painted glass sheets. Flat white paint initially had a high uptake coefficient (8.3 × 10-6) at 20% RH which plateaued to 1.1 × 10-6 as the paint aged in an indoor office over weeks. Increasing the RH from 0 to 75% increased γO3 by a factor of 3.0, and exposure to 134 ppb of α-terpineol for 1 h increased γO3 by a factor of 1.6 at 20% RH. RH also increases α-terpineol partitioning to paint, further increasing ozone loss, but the type of paint (flat, eggshell, satin, semigloss) had no significant effect. A kinetic multilayer model captures the dependence of γO3 on RH and the presence of α-terpineol, indicating the reacto-diffusive depth for O3 is 1 to 2 μm. Given the similarity of the kinetics on aged surfaces across many paint types and the sustained reactivity during aging, these results suggest a mechanism for catalytic loss.

Jingle bells, what are those smells? Indoor VOC emissions from a live Christmas tree

Every year in the United States conifers are purchased to serve as Christmas trees in homes where they emit volatile organic compounds (VOCs) to the indoor environment. Although many studies have measured the ecosystem-level emissions of VOCs from conifers outdoors (characterizing monoterpene, isoprene, and aldehyde emissions), little is known about VOC emission rates once a conifer is brought indoors. Using a proton transfer reaction-mass spectrometer we characterized the VOCs emitted from a freshly cut Douglas Fir for 17 days in an environmentally controlled chamber. Ozone injections were also performed to analyze indoor chemistry that may occur. Introduction of the tree into the chamber increased the response of 52 mass spectra signals detected by the PTR-MS by at least 500 counts per second (cps) compared to background levels, with concentrations sharply decreasing after the first two days. Monoterpenes were emitted from the tree at a rate of 12.4 mg h-1 the first day and fell to 1 mg h-1 by day three. Overall, monoterpene emissions from this Douglas fir were initially comparable to other strong indoor monoterpene sources (fragranced products and air fresheners) but decayed quickly and, within days, were smaller than other common indoor sources. Addition of ozone to the chamber resulted in decreased monoterpene concentrations that coincided with modest increases in formaldehyde. Four other emitted VOCs were tentatively identified due to their large increase within the first few hours of the tree placed in the chamber, behavior during ozonation, or pattern of accumulation over time.

Wildfire plume ageing in the Photochemical Large Aerosol Chamber (PHOTO-LAC)

Plumes from wildfires are transported over large distances from remote to populated areas and threaten sensitive ecosystems. Dense wildfire plumes are processed by atmospheric oxidants and complex multiphase chemistry, differing from processes at typical ambient concentrations. For studying dense biomass burning plume chemistry in the laboratory, we establish a Photochemical Large Aerosol Chamber (PHOTO-LAC) being the world's largest aerosol chamber with a volume of 1800 m3 and provide its figures of merit. While the photolysis rate of NO2 (jNO2) is comparable to that of other chambers, the PHOTO-LAC and its associated low surface-to-volume ratio lead to exceptionally low losses of particles to the walls. Photochemical ageing of toluene under high-NOx conditions induces substantial formation of secondary organic aerosols (SOAs) and brown carbon (BrC). Several individual nitrophenolic compounds could be detected by high resolution mass spectrometry, demonstrating similar photochemistry to other environmental chambers. Biomass burning aerosols are generated from pine wood and debris under flaming and smouldering combustion conditions and subsequently aged under photochemical and dark ageing conditions, thus resembling day- and night-time atmospheric chemistry. In the unprecedented long ageing with alternating photochemical and dark ageing conditions, the temporal evolution of particulate matter and its chemical composition is shown by ultra-high resolution mass spectrometry. Due to the spacious cavity, the PHOTO-LAC may be used for applications requiring large amounts of particulate matter, such as comprehensive chemical aerosol characterisation or cell exposures under submersed conditions.

Investigating exceedances of formaldehyde levels and source identification in offices of an academic medical institute

OBJECTIVES

To investigate factors associated with indoor formaldehyde levels in office settings within an academic medical institute.

METHODS

This cross-sectional study was conducted in 25 offices (261 workers) at a medical university in Thailand. Questionnaires gathered data on demographics, work patterns, and office equipment usage (printers, photocopiers, air fresheners, liquid paper, glue, cleaning agents, and marker pens). The building environment was assessed by a multidisciplinary team. Formaldehyde levels and relevant parameters (temperature and relative humidity) were measured in each room both indoors and outdoors. A multiple linear regression model investigated the relationship between formaldehyde and office factors, controlling for room conditions.

RESULTS

Median office formaldehyde levels were 442.1 μg/m3 (interquartile range: 343.8-908.7 μg/m3), exceeding World Health Organization and Thai guidelines. Photocopier use was significantly associated with higher levels of indoor formaldehyde (β = .20; 95% CI, 0.30-0.37; P = .02). Air freshener use also showed a significant association (β = .56; 95% CI, 0.30-0.81; P < .001). No correlation was found between the use of liquid paper, glue, printers, cleaning agents, or marker pens and indoor formaldehyde levels.

CONCLUSIONS

Indoor formaldehyde levels in these offices exceeded the established guidelines. Use of photocopiers and air fresheners was associated with increased formaldehyde levels. Implementing interventions such as improved ventilation and regular screening is essential for creating healthier office environments.

Water Plays Multifunctional Roles in the Intervening Formation of Secondary Organic Aerosols in Ozonolysis of Limonene: A Valence Photoelectron Spectroscopy and Density Functional Theory Study

Although water may affect aqueous aerosol chemistry, how it intervenes in the formation of secondary organic aerosols (SOAs) at the molecular level remains elusive. Ozonolysis of limonene is one of the most important sources of indoor SOAs. Here, we report the valence electronic properties of limonene aerosols and SOAs derived from limonene ozonolysis (Lim-SOAs) via aerosol vacuum ultraviolet photoelectron spectroscopy, with a focus on the effects of water on Lim-SOAs. The first vertical ionization energy of limonene aerosols is measured to be 8.79 ± 0.07 eV. While water significantly increases the total photoelectron yield of Lim-SOAs, three photoelectron features attributable to Lim-SOAs each exhibit distinct dependence on the fraction of water in aerosols, implying that different formation pathways and molecular origins are involved in the formation of Lim-SOAs. Combined with density functional theory calculation and mass spectrometry measurements, this study reveals that water, particularly the water dimer, enhances the formation of Lim-SOAs by altering the ozonolysis energetics and pathways by intervening in its Criegee chemistry, acting as both a catalyst and a reactant. The atmospheric implication is discussed.

Effects of occupant behaviors on perceived dormitory air quality and sick building syndrome symptoms among female college students

We performed a cross-sectional survey of 2143 female students in a university in Tianjin, China regarding perceived air quality (PAQ) and sick building syndrome (SBS) symptoms in the student dormitory. The prevalence of general, mucosal, and skin symptoms was 22.1%, 21.9%, and 26.3%, respectively. The three most prevalent PAQ complaints were "dry air" (48.9% often), "stuffy odor" (18.2%), and "other unpleasant odors" (5.1%), and they were significant risk factors for 11-12 out of 12 SBS symptoms (adjusted odds ratios [AOR]: 1.6-5.8). Survey data of 1471 undergraduates, whose dorms were of uniform layout and furnishing, were used to further investigate the influences of occupancy level and occupant behaviors on PAQ and SBS symptoms. Frequent use of air freshener/perfume was a significant risk factor for "dry air," less frequent room cleaning and higher occupancy density were significant risk factors for "stuffy odor," and less natural ventilation was a significant risk factor for both "stuffy odor" and "pungent odor." These factors were also significantly associated with some SBS symptoms. In particular, the use of air freshener/perfume exhibited a significant dose-response pattern with "fatigue" (sometimes: AOR 1.3; often: AOR 2.0) and with "irritated, stuffy, or runny nose" (sometimes: AOR 1.6; often: AOR 2.2).

The role of PP2A /NLRP3 signaling pathway in ambient particulate matter 2.5 induced lung injury

Ambient particulate matter 2.5 (PM_2.5) exposure has been linked to pulmonary fibrosis. However, the key signaling pathways remained unclear. In the present study, we applied a mouse model with myeloid-specific deletion of Ppp2r1a gene (encoding protein phosphatase 2 A (PP2A) A subunit) to identify the key signaling pathways involved in PM_2.5-induced pulmonary fibrosis. PP2A Aα^-/- homozygote mice and matched wild-type (WT) littermates were exposed to filtered air (FA), unfiltered air (UA), and concentrated PM_2.5 (CA) in a real-ambient PM exposure system for 8 weeks and 16 weeks, respectively. The mice exposed to PM_2.5 displayed a progressive inflammation and pulmonary fibrosis. Moreover, the expressions of NLRP3, pro-caspase-1, caspase-1, ASC and IL-1β were increased in mice lung following PM_2.5 exposure, indicating PM_2.5 exposure caused pulmonary inflammation by the NLRP3 pathways activation. Furthermore, the effects of PM exposure on pulmonary inflammation, pulmonary fibrosis, oxidative stress, and pulmonary function damage were significantly enhanced in PP2A^-/- mice compared to WT mice, indicating the role of PP2A in the regulation of pulmonary injury induced by PM exposure. In vitro study confirmed that PP2A was involved in the PM_2.5-induced inflammation response and NLRP3 inflammasome activation. Importantly, we identified PP2A regulated the activation of NLRP3 pathways by direct dephosphorylating IRE1α in response to PM_2.5 exposure. Taken together, our results demonstrated that PP2A-IRE1α-NLRP3 signaling pathway played a crucial role in regulating the inflammation response, triggering the lung fibrogenesis upon PM_2.5 exposure. Our findings provide new insights into regulatory role of PP2A in human diseases upon the PM exposure.

Recent advances on SOA formation in indoor air, fate and strategies for SOA characterization in indoor air - A review

Recent studies proves that indoor air chemistry differs in many aspects from atmospheric one. People send up to 90 % of their life indoors being exposed to pollutants present in gas, particle and solid phase. Particle phase indoor is composed of particles emitted from various sources, among which there is an indoor source - secondary chemical reactions leading to formation of secondary organic aerosol (SOA). Lately, researchers' attentions turned towards the ultrafine particles, for there are still a lot of gaps in knowledge concerning this field of study, while there is evidence of negative influence of ultrafine particles on human health. Presented review sums up current knowledge about secondary particle formation in indoor environment and development of analytical techniques applied to study those processes. The biggest concern today is studying ROS, for their lifetime in indoor air is very short due to reactions at the very beginning of terpene oxidation process. Another interesting aspect that is recently discovered is monoterpene autooxidation process that leads to HOMs formation that in turn can influence SOA formation yield. A complex studies covering gas phase and particle phase characterization, but also toxicological studies are crucial to fully understand indoor air chemistry leading to ultrafine particle formation.

Volatile Organic Compound Emission Status and Control Perspectives in the Petroleum Refining Industry in China

Given the increasingly serious ozone pollution, petroleum refining has received more attention, since it is one of the dominant volatile organic compound-emitting industries in China. Volatile organic compound emission source identification, control efficiency classification, emissions calculation, emission factor generation and uncertainty analysis were performed in this study. According to the VOC emission control level, petroleum refining enterprises were divided into three levels, accounting for 10.6%, 54.4% and 35% of the total refining capacity, and 0.6%, 1.2%, and 3% were generated as the emission factor for each designed level, respectively. The total volatile organic compound emissions of the China petroleum refining industry in 2020 are estimated to be 1150 Kt by applying the hierarchical accounting method. Furthermore, the spatial distribution of volatile organic compound emissions was analyzed. The emission intensity of 15 cities is greater than the national average value of 0.12 tons/km2, where the highest level is approximately 2.7 tons/km2. To reduce the volatile organic compound emissions of PR enterprises, the collection efficiency and operation effect of treatment facilities are the most important points based on the analysis of the current situation of volatile organic compound emissions in the PR industry in China.

In-situ TD-GCMS measurements of oxidative products of monoterpenes at typical vaping temperatures: implications for inhalation exposure to vaping products

Vaping is gaining in popularity. However, there is still much that remains unknown about the potential risk and harms of vaping. Formation of oxidative products is one of such areas that are not well understood. In this study, we used an in-situ thermal desorption GC/MS method to investigate the formation of oxidative products of several monoterpenes at or below typical vaping temperatures. Among the five tested monoterpenes, the unchanged portion of the parent compound in the vapour varied from 97 to 98% for myrcene to 11–28% for terpinolene. The majority of formed oxidative products in the vapour have a molecular weight of 134 (loss of two hydrogens), 150 (insertion of one oxygen and loss of two hydrogen atoms) or 152 (insertion of one oxygen atom). Three products, likely to be p-(1-propenyl)-toluene, β-pinone and fenchol were also observed. This is the first in-situ thermal desorption GC/MS study to investigate the possible formation of oxidative products of monoterpenes, one of the major components in vaping liquids, at temperatures that are relevant to the vaping process. Although the toxicity of inhaling these oxidative products is not clear yet, allergic and irritation reactions associated with oxidized monoterpene oils are well documented. Therefore, potential adverse effects of inhaling these oxidative products during vaping could be investigated to help support human risk assessment.

Volatile organic compound and particulate emissions from the production and use of thermoplastic biocomposite 3D printing filaments

Biocomposites (BCs) can be used as substitutes for unsustainable polymers in 3D printing, but their safety demands additional investigation as biological fillers may produce altered emissions during thermal processing. Commercial filament extruders can be used to produce custom feedstocks, but they are another source of airborne contaminants and demand further research. These knowledge gaps are targeted in this study. Volatile organic compound (VOC), carbonyl compound, ultrafine particle (UFP), and fine (PM_2.5) and coarse (PM₁₀) particle air concentrations were measured in this study as a filament extruder and a 3D printer were operated under an office environment using one PLA and four PLA-based BC feedstocks. Estimates of emission rates (ERs) for total VOCs (TVOC) and UFPs were also calculated. VOCs were analyzed with a GC-MS system, carbonyls were analyzed with an LC-MS/MS system, whereas real-time particle concentrations were monitored with continuously operating instruments. VOC concentrations were low throughout the experiment; TVOC ranged between 34-63 µg/m³ during filament extrusion and 41-56 µg/m³ during 3D printing, which represent calculated TVOC ERs of 2.6‒3.6 × 10² and 2.9‒3.6 × 10² µg/min. Corresponding cumulative carbonyls ranged between 60-91 and 190-253 µg/m³. Lactide and miscellaneous acids and alcohols were the dominant VOCs, while acetone, 2-butanone, and formaldehyde were the dominant carbonyls. Terpenes contributed for ca. 20-40% of TVOC during BC processing. The average UFP levels produced by the filament extruder were 0.85 × 10²-1.05 × 10³ #/cm³, while the 3D printer generated 6.05 × 10²-2.09 × 10³ #/cm³ particle levels. Corresponding particle ERs were 5.3 × 10⁸-6.6 × 10⁹ and 3.8 × 10⁹-1.3 × 10¹⁰ #/min. PM_2.5 and PM₁₀ particles were produced in the following average quantities; PM_2.5 levels ranged between 0.2-2.2 µg/m³, while PM₁₀ levels were between 5-20 µg/m³ for all materials. The main difference between the pure PLA and BC feedstock emissions was terpenes, present during all BC extrusion processes. BCs are similar emission sources as pure plastics based on our findings, and a filament extruder produces contaminants at comparable or slightly lower levels in comparison to 3D printers.

A review of secondary organic aerosols formation focusing on organosulfates and organic nitrates

Secondary organic aerosols (SOA) are crucial constitution of fine particulate matter (PM), which are mainly derived from photochemical oxidation products of primary organic matter and volatile organic compounds (VOCs), and can induce terrible impacts to human health, air quality and climate change. As we know, organosulfates (OSs) and organic nitrates (ON) are important contributors for SOA formation, which could be possibly produced through various pathways, resulting in extremely complex formation mechanism of SOA. Although plenty of research has been focused on the origins, spatial distribution and formation mechanisms of SOA, a comprehensive and systematic understanding of SOA formation in the atmosphere remains to be detailed explored, especially the most important OSs and ON dedications. Thus, in this review, we systematically summarize the recent research about origins and formation mechanisms of OSs and ON, and especially focus on their contribution to SOA, so as to have a clearer understanding of the origin, spatial distribution and formation principle of SOA. Importantly, we interpret the complex interaction with coexistence effect of SO_x and NO_x on SOA formation, and emphasize the future insights for SOA research to expect a more comprehensive theory and practice to alleviate SOA burden.

Formation of cluster mode particles (1-3 nm) in preschools

This study is the first study that reports the cluster particle (1-3 nm) formation (CPF) in two modern preschools located in Nur-Sultan city of Kazakhstan from October 28 to November 27, 2019. The average particle number concentration and mode diameter values during major CPF events in Preschool I and Preschool II were found to be 1.90 × 10⁶ (SD 6.43 × 10⁶) particles/cm³ and 1.60 (SD 0.85) nm, and 1.11 × 10⁹ (SD 5.46 × 10⁹) particles/cm³ and 2.16 (SD 1.47) nm, respectively. The ultraviolet PM concentration reached as high as 7 μg/m³ in one of the measurement days. The estimated emission rate in Preschool I for CPF events was 9.57 × 10⁹ (SD 1.92 × 10⁹) particles/min. For Preschool II, the emission rate was 7.25 × 10⁹ (SD 12.4 × 10⁹) particles/min. We identified primary cluster particles (CPs) emitted directly from the sources such as candle burning, and secondary CPs formed as a result of the oxidation of indoor VOCs or smoking VOCs. The secondary CPs are likely to be SOA. Indoor VOCs were mainly emitted during cleaning activities as well as during painting and gluing. Indoor VOCs are the controlling factors in the CPF events. Changes in the training and cleaning programs may result in significant reductions in the exposure of the children to CPs.

Cannabis Cultivation Facilities: A Review of Their Air Quality Impacts from the Occupational to Community Scale

This review addresses knowledge gaps in cannabis cultivation facility (CCF) air emissions by synthesizing the peer-reviewed and gray literature. Focus areas include compounds emitted, air quality indoors and outdoors, odor assessment, and the potential health effects of emitted compounds. Studies suggest that β-myrcene is a tracer candidate for CCF biogenic volatile organic compounds (BVOCs). Furthermore, β-myrcene, d-limonene, terpinolene, and α-pinene are often reported in air samples collected in and around CCF facilities. The BVOC emission strength per dry weight of plant is higher than most conventional agriculture crops. Nevertheless, reported total CCF BVOC emissions are lower compared with VOCs from other industries. Common descriptors of odors coming from CCFs include "skunky", "herbal", and "pungent". However, there are few peer-reviewed studies addressing the odor impacts of CCFs outdoors. Atmospheric modeling has been limited to back trajectory models of tracers and ozone impact assessment. Health effects of CCFs are mostly related to odor annoyance or occupational hazards. We identify 16 opportunities for future studies, including an emissions database by strain and stage of life (growing cycle) and odor-related setback guidelines. Exploration and implementation of key suggestions presented in this work may help regulators and the industry reduce the environmental footprint of CCF facilities.

Cannabis Vaping: Existing and Emerging Modalities, Chemistry, and Pulmonary Toxicology

The outbreak of e-cigarette or vaping product use-associated lung injury (EVALI) has been cause for concern to the medical community, particularly given that this novel illness has coincided with the COVID-19 pandemic, another cause of severe pulmonary illness. Though cannabis e-cigarettes tainted with vitamin E acetate were primarily associated with EVALI, acute lung injuries stemming from cannabis inhalation were reported in the literature prior to 2019, and it has been suggested that cannabis components or additives other than vitamin E acetate may be responsible. Despite these concerning issues, novel cannabis vaporizer ingredients continue to arise, such as Δ8-tetrahydrocannabinol, Δ10-tetrahydrocannabinol, hexahydrocannabinol, and cannabichromene. In order to address cannabis e-cigarette safety and vaping in an effective manner, we provide a comprehensive knowledge of the latest products, delivery modes, and ingredients. This perspective highlights the types of cannabis vaping modalities common to the United States cannabis market, with special attention to cartridge-type cannabis e-cigarette toxicology and their involvement in the EVALI outbreak, in particular, acute lung injurious responses. Novel ingredient chemistry, origins, and legal statuses are reviewed, as well as the toxicology of known cannabis e-cigarette aerosol components.

Indoor air quality of 5,000 households and its determinants. Part A: Particulate matter (PM2.5 and PM10-2.5) concentrations in the Japan Environment and Children's Study

Exposure to particulate matter (PM) is one of the important risk factors for morbidity and mortality. Although PM concentrations have been assessed using air quality monitoring stations or modelling, few studies have measured indoor PM in large-scale birth cohorts. The Japan Environment and Children's Study (JECS) measured indoor and outdoor air quality in approximately 5000 households when the participating children were aged 1.5 and 3 years. PM was collected using portable pumps for 7 days (total of 24 h), inside and outside each home. Prediction models for indoor PM concentrations were built using data collected at age 1.5 years and post-validated against data collected at age 3 years. Median indoor/outdoor PM_2.5 and PM_10-2.5 concentrations at age 1.5 years [3 years] were 12.9/12.7 [12.5/11.3] μg/m³ and 5.0/6.3 [5.1/6.1] μg/m³, respectively. Random forest regression analysis found that the major predictors of indoor PM_2.5 were indoor PM_10-2.5, outdoor PM_2.5, indoor smoking, observable smoke and indoor/outdoor temperature. Indoor PM_2.5, outdoor PM_10-2.5, indoor humidity and opening room windows were important predictors of indoor PM_10-2.5 concentrations. Indoor benzene, acetaldehyde, ozone and nitrogen dioxide concentrations were also found to predict indoor PM_2.5 and PM_10-2.5 concentrations, possibly due to the formation of secondary organic aerosols. These findings demonstrate the importance of reducing outdoor PM concentrations, avoiding indoor smoking, using air cleaner in applicable and diminishing sources of VOCs that could form secondary organic aerosols, and the resulting models can be used to predict indoor PM concentrations for the rest of the JECS cohort.

Health risk assessment of volatile organic compounds at daycare facilities

Children are particularly vulnerable to many classes of the volatile organic compounds (VOCs) detected in indoor environments. The negative health impacts associated with chronic and acute exposures of the VOCs might lead to health issues such as genetic damage, cancer, and disorder of nervous systems. In this study, 40 VOCs including aldehydes and ketones, aliphatic hydrocarbons, esters, aromatic hydrocarbons, cyclic terpenes, alcohols, and glycol ethers were identified and qualified in different locations at the University of Missouri (MU) Child Development Laboratory (CDL) in Columbia, Missouri. Our results suggested that the concentrations of the VOCs varied significantly among classrooms, hallways, and playground. The VOCs emitted from personal care and cleaning products had the highest indoor levels (2-ethylhexanol-1, 3-carene, homomenthyl salicylate with mean concentration of 5.15 µg/m³ , 1.57 µg/m³ , and 1.47 µg/m³ , respectively). A cancer risk assessment was conducted, and none of the 95th percentile dose estimates exceeded the age-specific no significant risk levels (NSRL) in all classrooms. Dimensionless toxicity index scores were calculated for all VOCs using a novel web-based framework called Toxicological Prioritization Index (ToxPi), which integrates multiple sources of toxicity data. According to the method, homomenthyl salicylate, benzothiazole, 2-ethylhexyl salicylate, hexadecane, and tridecane exhibited diverse toxicity profiles and ranked as the five most toxic indoor VOCs. The findings of this study provide critical information for policy makers and early education professionals to mitigate the potentially negative health impacts of indoor VOCs in the childcare facilities.

Toxicological Responses of α-Pinene-Derived Secondary Organic Aerosol and Its Molecular Tracers in Human Lung Cell Lines

Secondary organic aerosol (SOA) is a major component of airborne fine particulate matter (PM2.5) that contributes to adverse human health effects upon inhalation. Atmospheric ozonolysis of α-pinene, an abundantly emitted monoterpene from terrestrial vegetation, leads to significant global SOA formation; however, its impact on pulmonary pathophysiology remains uncertain. In this study, we quantified an increasing concentration response of three well-established α-pinene SOA tracers (pinic, pinonic, and 3-methyl-1,2,3-butanetricarboxylic acids) and a full mixture of α-pinene SOA in A549 (alveolar epithelial carcinoma) and BEAS-2B (bronchial epithelial normal) lung cell lines. The three aforementioned tracers contributed ∼57% of the α-pinene SOA mass under our experimental conditions. Cellular proliferation, cell viability, and oxidative stress were assessed as toxicological end points. The three α-pinene SOA molecular tracers had insignificant responses in both cell types when compared with the α-pinene SOA (up to 200 μg mL-1). BEAS-2B cells exposed to 200 μg mL-1 of α-pinene SOA decreased cellular proliferation to ∼70% and 44% at 24- and 48-h post exposure, respectively; no changes in A549 cells were observed. The inhibitory concentration-50 (IC50) in BEAS-2B cells was found to be 912 and 230 μg mL-1 at 24 and 48 h, respectively. An approximate 4-fold increase in cellular oxidative stress was observed in BEAS-2B cells when compared with untreated cells, suggesting that reactive oxygen species (ROS) buildup resulted in the downstream cytotoxicity following 24 h of exposure to α-pinene SOA. Organic hydroperoxides that were identified in the α-pinene SOA samples likely contributed to the ROS and cytotoxicity. This study identifies the potential components of α-pinene SOA that likely modulate the oxidative stress response within lung cells and highlights the need to carry out chronic exposure studies on α-pinene SOA to elucidate its long-term inhalation exposure effects.

The influence of terpenes on the release of volatile organic compounds and active ingredients to cannabis vaping aerosols

Cannabinoid and VOC emissions from vaping cannabis concentrates vary depending on terpene content, power level and consumption method.

Measurements and analysis of non-methane VOC (NMVOC) emissions from major domestic aerosol sprays at "source"

Non-Methane Volatile Organic Compounds (NMVOCs) from domestic aerosol sprays are emerging pollutants and have substantial negative effects on human health and the environment. This study, for the first time, carried out quantification of the NMVOC emissions from off-the-shelf domestic aerosol sprays, at "source" in the UK. These aerosol sprays contain harmful organic compounds as propellants and products. The results showed that the cosmetic category (i.e. body sprays) have higher concentrations of NMVOCs with 93.7 wt% per can compared to households (i.e. air fresheners) with 62 wt%. Also, water-based products showed less NMVOCs in all analyses compared to solvent-based formulations. Direct replacement of Liquefied Petroleum Gas (LPG) propellants from conventional products with 'clean air' (i.e. nitrogen) showed the potential emission reduction of 50%. Hair spray products, however, have the highest ozone forming potential with about 105.1 g of Ozone per litre of the product compared to other domestic aerosol sprays. The level of global warming contribution of the selected aerosol sprays in the UK was measured to be 129.8 ktCO₂e in 2018 and globally, this can be projected to be 3154.6 ktCO₂e in 2020. Furthermore, NMVOC emissions contribution from the domestic aerosol sprays in the UK was measured as 61.2 kt in 2018 based on annual consumption of 520 million cans. Globally this can equate to 1437.6 kt based on the projected usage of 17.5 billion cans. Therefore, it is vital to expedite replacing LPG propellant with nitrogen in a drive for a 'near-zero' emission in aerosol industry. The results presented in this study can also be used to steer policy makers to the potentially brewing danger from an otherwise passive emission source.

Ultrafine particle emission from floor cleaning products

The new particle formation due to the use of cleaning products containing volatile organic compounds (VOCs) in indoor environments is well documented in the scientific literature. Indeed, the physical-chemical process occurring in particle nucleation due to VOC-ozone reactions was deepened as well as the effect of the main influencing parameters (ie, temperature, ozone). Nonetheless, proper quantification of the emission under actual meteo-climatic conditions and ozone concentrations is not available. To this end, in the present paper the emission factors of newly generated ultrafine particles due to the use of different floor cleaning products under actual temperature and relative humidity conditions and ozone concentrations typical of the summer periods were evaluated. Tests in a chamber and in an actual indoor environment were performed measuring continuously particle number concentrations and size distributions during cleaning activities. The tests revealed that a significant particle emission in the nucleation mode was present for half of the products under investigation with emission factors up to 1.1 × 10¹¹ part./m² (8.8 × 10¹⁰ part./mL_product ), then leading to an overall particle emission comparable to other well-known indoor sources when cleaning wide surfaces.

Concentrations of Formic Acid, Acetic Acid, and Ammonia in Newly Constructed Houses

Herein, the concentrations of formic acid, acetic acid, and ammonia in samples of indoor air for 47 new houses were measured two weeks after completion. The houses were fabricated with light-gauge steel structures. The measurements were performed in living rooms and bedrooms without furniture and outdoors. Air samples were analyzed using ion chromatography. The mean values were 28 (living room), 30 (bedroom), and 20 μg m⁻³ (outdoor air) for formic acid; 166 (living room), 151 (bedroom), and 51 μg m⁻³ (outdoor air) for acetic acid; and 73 (living room), 76 (bedroom), and 21 μg m⁻³ (outdoor air) for ammonia. The total values of the three substances accounted for 39.4–40.7% of the sum of chemical compound values. The analyzed compounds were indicated by two principal components (PC), PC1 (30.1%) and PC2 (9%), with 39.1% total variance. Formic acid, acetic acid, and ammonia were positively aligned with PC1 and negatively aligned with PC2. Factors such as room temperature, aldehydes, and phthalates were positively aligned with PC1 and negatively aligned with PC2. Furthermore, concentrations of formic acid, acetic acid, and ammonia were significantly and positively correlated with room temperature (p < 0.05).

Potted plants do not improve indoor air quality: a review and analysis of reported VOC removal efficiencies

Potted plants have demonstrated abilities to remove airborne volatile organic compounds (VOC) in small, sealed chambers over timescales of many hours or days. Claims have subsequently been made suggesting that potted plants may reduce indoor VOC concentrations. These potted plant chamber studies reported outcomes using various metrics, often not directly applicable to contextualizing plants' impacts on indoor VOC loads. To assess potential impacts, 12 published studies of chamber experiments were reviewed, and 196 experimental results were translated into clean air delivery rates (CADR, m³/h), which is an air cleaner metric that can be normalized by volume to parameterize first-order loss indoors. The distribution of single-plant CADR spanned orders of magnitude, with a median of 0.023 m³/h, necessitating the placement of 10-1000 plants/m² of a building's floor space for the combined VOC-removing ability by potted plants to achieve the same removal rate that outdoor-to-indoor air exchange already provides in typical buildings (~1 h^-1). Future experiments should shift the focus from potted plants' (in)abilities to passively clean indoor air, and instead investigate VOC uptake mechanisms, alternative biofiltration technologies, biophilic productivity and well-being benefits, or negative impacts of other plant-sourced emissions, which must be assessed by rigorous field work accounting for important indoor processes.

Health effects from freshly emitted versus oxidatively or photochemically aged air pollutants

Epidemiology studies over the past five decades have provided convincing evidence that exposure to air pollution is associated with multiple adverse health outcomes, including increased mortality. Air pollution is a complex mixture of particles, vapors and gases emitted from natural and anthropogenic sources as well as formed through photochemical transformation processes. In metropolitan areas, air pollutants from combustion emissions feature a blend of emitted particles, oxides of carbon, sulfur and nitrogen, volatile organic compounds, and secondary reaction products, such as ozone, nitrogen dioxide, and secondary organic aerosols. Because many of the primary and transformed pollutants track together, their relative contributions to health outcomes are difficult to disentangle. Aside from the criteria pollutants ozone and nitrogen dioxide and some of the simpler aldehydes (e.g. formaldehyde and acrolein), other products from photochemical processes are a particularly vexing class of chemicals to investigate since they comprise a dynamic ill-defined complex mixture in both particulate and gas phases. The purpose of this review was to describe and compare health effects of freshly emitted versus oxidatively or photochemically aged air pollutants. In some cases, (e.g. single volatile organic compounds) photochemical transformation resulted in marked enhancements in toxicity through formation of both known and unidentified reaction products, while in other examples (e.g. aging of automobile emissions) the potentiation of effect was variable. The variation in experimental design, aging system employed, concentration and type of starting agent, and toxicity endpoints make comparisons between different studies exceedingly difficult. A more systematic approach with a greater emphasis on higher throughput screening and computational toxicology is needed to fully answer under what conditions oxidatively- or photochemically-transformed pollutants elicit greater health effects than primary emissions.

Indoor air chemistry: Terpene reaction products and airway effects

Reactive chemistry is ubiquitous indoors with a wealth of complex oxidation reactions; some of these are initiated by both homogeneous and heterogeneous reaction of ozone with unsaturated organic compounds and subsequent the hydroxyl radical, either in the gas-phase or on reactive surfaces. One major focus has been the reaction of common and abundant terpene-based fragrances in indoor air emitted from many wood-based materials, a variety of consumer products, and citrus fruits and flowers. Inhalation of the terpenes themselves are generally not considered a health concern (both acute and long-term) due to their low indoor air concentrations; however, their gas- and surface reactions with ozone and the hydroxyl radical produce a host of products, both gaseous, i. a. formaldehyde, and ultrafine particles formed by condensation/nucleation processes. These reaction products may be of health concern. Human cell bioassays with key reaction products from ozone-initiated terpene reactions have shown some inflammatory reactions, but results are difficult to interpret for human exposure and risk assessment. Acute effects like sensory irritation in eyes and airways are unlikely or present at very low intensity in real life conditions based on rodent and human exposure studies and known thresholds for sensory irritation in eyes and airways and derived human reference values for airflow limitation and pulmonary irritation. Some fragrances and their ozone-initiated reaction products may possess anti-inflammatory properties. However, long-term effects of the reaction products as ultrafine particles are poorly explored. Material and product surfaces with high ozone deposition velocities may significantly impact the perceived air quality by altered emissions from both homogeneous and heterogeneous surface reactions.

Cutting down on the ozone and SOA formation as well as health risks of VOCs emitted from e-waste dismantlement by integration technique

Elimination of volatile organic compounds (VOCs) in the e-waste dismantling industry by an integration technique of spray tower-electrostatic precipitation-photocatalysis was conducted to investigate its application possibility for reducing formation of O₃ and secondary organic aerosols (SOAs) as well as exposure risk. Results revealed the average 5.4 × 10² μg m^-3 of VOCs with the top two groups being aromatic hydrocarbons (AHs, 55.93%) and halogenated hydrocarbons (HHs, 33.33%), contributing to 1.3 × 10³ and 3.0 × 10⁴ μg m^-3 of the O₃ and SOA (OFP and SOAFP) formation potential, respectively. Furthermore, 86.47% of OFP and 99.87% of SOAFP were ascribed to AHs, in which toluene ranked first (35.30% and 48.07%). The highest removal efficiency (76.92%) for VOCs by the integrated technique resulted in excellent prevention efficiencies of OFP (71.54%) and SOAFP (80.62%). Occupational cancer risk assessment found that HHs (62.63%) and AHs (36.93%) were the top two contributors. After the treatment by the integrated technique, 55.44% of the total risk index was reduced with the accumulation of few low-concentrated and more toxic AHs (e.g. 6.6 μg m^-3 benzene on average). All results suggest that controlling AH and HH emissions from the e-waste dismantling source could efficiently prevent atmospheric secondary pollution and human exposure risk to industrial emission.

Predicting the importance of oxidative aging on indoor organic aerosol concentrations using the two-dimensional volatility basis set (2D-VBS)

Organic aerosol (OA) is chemically dynamic, continuously evolving by oxidative chemistry, for instance, via hydroxyl radical (OH) reactions. Studies have explored this evolution (so-called OA aging) in the atmosphere, but none have investigated it indoors. Aging organic molecules in both particle and gas-phases undergo changes in oxygen content and volatility, which may ultimately either enhance or reduce the condensed-phase OA concentration (C_OA ). This work models OH-induced aging using the two-dimensional volatility basis set (2D-VBS) within an indoor model and explores its significance on C_OA relative to prior modeling methodologies which neglect aging transformations. Lagrangian, time-averaged, and transient indoor simulations were conducted. The time-averaged simulations included a Monte Carlo procedure and sensitivity analysis, using input distributions typical of U.S. residences. Results demonstrate that indoors, aging generally leads to C_OA augmentation. The extent to which this is significant is conditional upon several factors, most notably temperature, OH exposure, and OA mass loading. Time-averaged C_OA was affected minimally in typical residences (<5% increase). However, some plausible cases may cause stronger C_OA enhancements, such as in a sunlit room where photolysis facilitates significant OH production (~20% increase), or during a transient OH-producing cleaning event (~35% peak increase).

Short-Term Effects of Carbonaceous Components in PM2.5 on Pulmonary Function: A Panel Study of 37 Chinese Healthy Adults

OBJECTIVES

To explore the health effects of indoor/outdoor carbonaceous compositions in PM_2.5 on pulmonary function among healthy students living in the local university campus.

METHODS

Daily peak expiratory flow (PEF) and forced expiratory volume in 1 second (FEV₁) were measured among 37 healthy students in the morning and evening for four two-week periods. Concurrent concentrations of indoor and outdoor PM_2.5 (particulate matter with an aerodynamic diameter ≤ 2.5μm), carbonaceous components in PM_2.5, ambient temperature, and relative humidity in the study area were also obtained. Mixed-effects model was applied to evaluate the associations between carbonaceous components and lung function. Different lags for the carbonaceous components were investigated.

RESULTS

In single-pollutant model, a 10 μg/m³ increase of indoor and outdoor EC (elemental carbon) associated with -3.93 (95%CI: -6.89, -0.97) L/min and -3.21 (95%CI: -5.67, -0.75) L/min change in evening PEF at lag 0 day, respectively. Also, a 10 μg/m³ increase of indoor and outdoor POC (primary organic carbon) concentration was significantly associated with -5.82 (95%CI: -10.82, -0.81) L/min and -7.32 (95%CI: -12.93, -1.71) L/min change of evening PEF at lag 0 day. After adjusting total mass of PM_2.5, indoor EC consistently had a significant adverse impact on evening PEF and FEV₁ at lag3 day and a cumulative effect at lag0-3 day.

CONCLUSIONS

This study suggests that carbonaceous components in PM_2.5 indeed have impacts on pulmonary function among healthy young adults especially on evening PEF. Thus, the local mitigation strategies on pollution are needed.

VOCs Measurements in Residential Buildings: Quantification via Thermal Desorption and Assessment of Indoor Concentrations in a Case-Study

Volatile organic compounds (VOCs) represent one of the most important categories of pollutants, influencing the air quality and human health and well-being in indoor environments. In the present study, 12 selected VOCs were sampled using Tenax TA tubes and analyzed by thermal desorption combined with gas chromatography and a flame ionization detector (TD-GC-FID). The TD-GC-FID method was optimized to obtain the separation of all the analytical peaks (including m- and p-xylene) and a satisfactory sensitivity, with low detection (between 0.14 and 0.31 ng) and quantification (between 0.47 and 1.02 ng) limits. The whole procedure was firstly assessed with the analysis of four co-located tubes exposed at an outdoor monitoring site, with results that revealed a very low inter-tubes variability (relative standard deviations of parallel measurements <5%). Then, the measurement protocol was used to quantify the indoor concentrations of the target VOCs in nine different homes during the dishwasher washing cycle. The most abundant detected VOC in all dwellings was d-limonene (mean: 231 µg/m3; maximum: 611 µg/m3). All the other compounds were monitored at concentration levels one or two orders of magnitude lower than d-limonene, and were generally comparable with those found in the scientific literature. In terms of health concerns, the measured concentrations were always well below the safe levels established for the protection of the general population in living environments.

Implications of RCP emissions on future concentration and direct radiative forcing of secondary organic aerosol over China

This study applies the nested-grid version of Goddard Earth Observing System (GEOS) chemical transport model (GEOS-Chem) to examine future changes (2000-2050) in SOA concentration and associated direct radiative forcing (DRF) over China under the Representative Concentration Pathways (RCPs). The projected changes in SOA concentrations over 2010-2050 generally follow future changes in emissions of toluene and xylene. On an annual mean basis, the largest increase in SOA over eastern China is simulated to be 25.1% in 2020 under RCP2.6, 20.4% in 2020 under RCP4.5, 56.3% in 2050 under RCP6.0, and 44.6% in 2030 under RCP8.5. The role of SOA in PM_2.5 increases with each decade in 2010-2050 under RCP2.6, RCP4.5, and RCP8.5, with a maximum ratio of concentration of SOA to that of PM_2.5 of 16.3% in 2050 under RCP4.5 as averaged over eastern China (20°-45°N, 100°-125°E). Concentrations of SOA are projected to be able to exceed those of sulfate, ammonium, and black carbon (BC) in the future. The future changes in SOA levels over eastern China are simulated to lead to domain-averaged (20°-45°N, 100°-125°E) DRFs of +0.19 W m^-2, +0.12 W m^-2, - 0.28 W m^-2, and -0.17 W m^-2 in 2050 relative to 2000 under RCP2.6, RCP4.5, RCP6.0, and RCP8.5, respectively. Model results indicate that future changes in SOA owing to future changes in anthropogenic precursor emissions are important for future air quality planning and climate mitigation measures.

Indoor air quality in health clubs: Impact of occupancy and type of performed activities on exposure levels

Associations between indoor air quality (IAQ) and health in sport practise environments are not well understood due to limited knowledge of magnitude of inhaled pollutants. Thus, this study assessed IAQ in four health clubs (HC1-HC4) and estimated inhaled doses during different types of activities. Gaseous (TVOCs, CO, O₃, CO₂) and particulate pollutants (PM₁, PM₄) were continuously collected during 40 days. IAQ was influenced both by human occupancy and the intensity of the performed exercises. Levels of all pollutants were higher when clubs were occupied (p < 0.05) than for vacant periods, with higher medians in main workout areas rather than in spaces/studios for group activities. In all spaces, TVOCs highly exceeded legislative limit (600 μg/m³), even when unoccupied, indicating possible risks for the respective occupants. CO₂ levels were well correlated with relative humidity (r_s 0.534-0.625) and occupancy due to human exhalation and perspiration during exercising. Clubs with natural ventilations exhibited twice higher PM, with PM₁ accounting for 93-96% of PM₄; both PM were highly correlated (r_s 0.936-0.995) and originated from the same sources. Finally, cardio classes resulted in higher inhalation doses than other types of exercising (1.7-2.6).

Comparison of the oxidative potential of primary (POA) and secondary (SOA) organic aerosols derived from α-pinene and gasoline engine exhaust precursors

Background: Primary (POA) and secondary (SOA) organic aerosols, deriving from both anthropogenic and biogenic sources, represent a major fraction of ambient particulate matter (PM) and play an important role in the etiology of respiratory and cardiovascular diseases, largely through systemic inflammation and cellular oxidative stress. The relative contributions of these species to the inhalation burden, however, are rather poorly characterized. In this study, we measured the in vitro oxidative stress response of alveolar macrophages exposed to primary and secondary PM derived from both anthropogenic and biogenic sources. Methods: POA and SOA were generated within an oxidation flow reactor (OFR) fed by pure, aerosolized α-pinene or gasoline engine exhaust, as representative emissions of biogenic and anthropogenic sources, respectively. The OFR utilized an ultraviolet (UV) lamp to achieve an equivalent atmospheric aging process of several days. Results: Anthropogenic SOA produced the greatest oxidative response (1900 ± 255 µg-Zymosan/mg-PM), followed by biogenic (α-pinene) SOA (1321 ± 542 µg-Zymosan/mg-PM), while anthropogenic POA produced the smallest response (51.4 ± 64.3 µg-Zymosan/mg-PM). Conclusions: These findings emphasize the importance of monitoring and controlling anthropogenic emissions in the urban atmosphere, while also taking into consideration spatial and seasonal differences in SOA composition. Local concentrations of biogenic and anthropogenic species contributing to the oxidative potential of ambient PM may vary widely, depending on the given region and time of year, due to factors such as surrounding vegetation, proximity to urban areas, and hours of daylight.

Comparison of the oxidative potential of primary (POA) and secondary (SOA) organic aerosols derived from α-pinene and gasoline engine exhaust precursors

Background: Primary (POA) and secondary (SOA) organic aerosols, deriving from both anthropogenic and biogenic sources, represent a major fraction of ambient particulate matter (PM) and play an important role in the etiology of respiratory and cardiovascular diseases, largely through systemic inflammation and cellular oxidative stress. The relative contributions of these species to the inhalation burden, however, are rather poorly characterized. In this study, we measured the in vitro oxidative stress response of alveolar macrophages exposed to primary and secondary PM derived from both anthropogenic and biogenic sources. Methods: POA and SOA were generated within an oxidation flow reactor (OFR) fed by pure, aerosolized α-pinene or gasoline engine exhaust, as representative emissions of biogenic and anthropogenic sources, respectively. The OFR utilized an ultraviolet (UV) lamp to achieve an equivalent atmospheric aging process of several days. Results: Anthropogenic SOA produced the greatest oxidative response (1900 ± 255 µg-Zymosan/mg-PM), followed by biogenic (α-pinene) SOA (1321 ± 542 µg-Zymosan/mg-PM), while anthropogenic POA produced the smallest response (51.4 ± 64.3 µg-Zymosan/mg-PM). Conclusions: These findings emphasize the importance of monitoring and controlling anthropogenic emissions in the urban atmosphere, while also taking into consideration spatial and seasonal differences in SOA composition. Local concentrations of biogenic and anthropogenic species contributing to the oxidative potential of ambient PM may vary widely, depending on the given region and time of year, due to factors such as surrounding vegetation, proximity to urban areas, and hours of daylight.

Ozone exposure and pulmonary effects in panel and human clinical studies: Considerations for design and interpretation

A wealth of literature exists regarding the pulmonary effects of ozone, a photochemical pollutant produced by the reaction of nitrogen oxide and volatile organic precursors in the presence of sunlight. This paper focuses on epidemiological panel studies and human clinical studies of ozone exposure, and discusses issues specific to this pollutant that may influence study design and interpretation as well as other, broader considerations relevant to ozone-health research. The issues are discussed using examples drawn from the wider literature. The recent panel and clinical literature is also reviewed. Health outcomes considered include lung function, symptoms, and pulmonary inflammation. Issues discussed include adversity, reversibility, adaptation, variability in ozone exposure metric used and health outcomes evaluated, co-pollutants in panel studies, influence of temperature in panel studies, and multiple comparisons. Improvements in and standardization of panel study approaches are recommended to facilitate comparisons between studies as well as meta-analyses. Additional clinical studies at or near the current National Ambient Air Quality Standard (NAAQS) of 70 ppb are recommended, as are clinical studies in sensitive subpopulations such as asthmatics.

IMPLICATIONS

The pulmonary health impacts of ozone exposure have been well documented using both epidemiological and chamber study designs. However, there are a number of specific methodological and related issues that should be considered when interpreting the results of these studies and planning additional research, including the standardization of exposure and health metrics to facilitate comparisons among studies.

Emission of volatile organic compounds and production of secondary organic aerosol from stir-frying spices

Cooking is an important source of volatile organic compounds (VOCs) and a potential source of secondary organic aerosol (SOA) both indoors and outdoors. In this study, VOC emissions from heating corn oil and stir-frying spices (i.e. garlic, ginger, myrcia and zanthoxylum piperitum (Sichuan pepper)) were characterized using an on-line membrane inlet vacuum ultraviolet single-photon ionization time-of-flight mass spectrometer (VUV-SPI-TOFMS). VOC emissions from heating corn oil were dominated by aldehydes, which were enhanced by factors of one order of magnitude when stir-frying spices. Stir-frying any of the spices studied generated large amounts of methylpyrrole (m/z 81). In addition, stir-frying garlic produced abundant dihydrohydroxymaltol (m/z 144) and diallyldisulfide (DADS) (m/z 146), while stir-frying ginger, myrcia and zanthoxylum piperitum produced abundant monoterpenes (m/z 136) and terpenoids (m/z 152, 154). SOA formed from emissions of stir-frying spices through reactions with excess ozone in a flow reactor as well as primary organic aerosol (POA) emissions were characterized using a scanning mobility particle sizer (SMPS) and a high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS). Stir-frying garlic and ginger generated similar POA concentrations to those from heating corn oil while stir-frying myrcia and zanthoxylum piperitum generated double the amount of emissions. No SOA was observed from stir-frying garlic and ginger. The rates of SOA production from stir-frying myrcia and zanthoxylum piperitum were 1.8μgmin^-1g_spice^-1 and 8.7μgmin^-1g_spice^-1, equivalent to 13.4% and 53.1% of their own POA emission rates, respectively. Therefore, the contribution of stir-frying spices to ambient organic aerosol levels is likely dominated by POA. The rates of total terpene emission from stir-frying myrcia and zanthoxylum piperitum were estimated to be 5.1μgmin^-1g_spice^-1 and 24.9μgmin^-1g_spice^-1, respectively. Our results suggest that stir-frying spices could be an important source of terpenes in indoor environments in Hong Kong, at least during cooking.

Ultrafine Particle Production from the Ozonolysis of Personal Care Products

Personal care products (PCP) might be a source of ultrafine particle exposure for users owing to the reaction of ozone with terpene ingredients. The near-person emissions associated with PCP may contribute to exposures that would not be properly accounted for with indoor microenvironmental measurements. To better understand this issue, screening experiments were conducted with 91 PCP to detect the occurrence of ultrafine particle production from exposure to common indoor levels of ozone (23 ± 2 ppb). Twelve products generated measurable particle emissions; quantification experiments were performed for these to determine total particle production and peak particle production rate. A high-resolution, small volume reaction chamber was used with a heated sample plate to simulate conditions found in the human thermal plume. Ten of the quantified PCP exhibited total emissions of less than 10⁹ particles, suggesting that they may not be significant sources of total ultrafine particle exposure. Two samples, a tea tree oil-based scalp treatment and a white lavender body lotion, exhibited relatively elevated peak particle emission rates, 6.2 × 10⁷ min^-1 and 2.0 × 10⁷ min^-1, respectively. The use of such products in the presence of significant ozone levels might materially influence personal exposure to ultrafine particles.

Reactive indoor air chemistry and health-A workshop summary

The chemical composition of indoor air changes due to the reactive nature of the indoor environment. Historically, only the stable parent compounds were investigated due to their ease of measurement by conventional methods. Today, however, scientists can better characterize oxidation products (gas and particulate-phase) formed by indoor chemistry. An understanding of occupant exposure can be developed through the investigation of indoor oxidants, the use of derivatization techniques, atmospheric pressure detection, the development of real-time technologies, and improved complex modeling techniques. Moreover, the connection between exposure and health effects is now receiving more attention from the research community. Nevertheless, a need still exists for improved understanding of the possible link between indoor air chemistry and observed acute or chronic health effects and long-term effects such as work-related asthma.

Significant OH production under surface cleaning and air cleaning conditions: Impact on indoor air quality

We report measurements of hydroxyl (OH) and hydroperoxy (HO₂ ) radicals made by laser-induced fluorescence spectroscopy in a computer classroom (i) in the absence of indoor activities (ii) during desk cleaning with a limonene-containing cleaner (iii) during operation of a commercially available "air cleaning" device. In the unmanipulated environment, the one-minute averaged OH concentration remained close to or below the limit of detection (6.5×10⁵  molecule cm^-3 ), whilst that of HO₂ was 1.3×10⁷  molecule cm^-3 . These concentrations increased to ~4×10⁶ and 4×10⁸  molecule cm^-3 , respectively during desk cleaning. During operation of the air cleaning device, OH and HO₂ concentrations reached ~2×10⁷ and ~6×10⁸  molecule cm^-3 respectively. The potential of these OH concentrations to initiate chemical processing is explored using a detailed chemical model for indoor air (the INDCM). The model can reproduce the measured OH and HO₂ concentrations to within 50% and often within a few % and demonstrates that the resulting secondary chemistry varies with the cleaning activity. Whilst terpene reaction products dominate the product composition following surface cleaning, those from aromatics and other VOCs are much more important during the use of the air cleaning device.

Association of Ozone Exposure With Cardiorespiratory Pathophysiologic Mechanisms in Healthy Adults

Importance

Exposure to ozone has been associated with cardiovascular mortality, but the underlying biological mechanisms are not yet understood.

Objective

To examine the association between ozone exposure and cardiopulmonary pathophysiologic mechanisms.

Design, Setting, and Participants

A longitudinal study involving 89 healthy adult participants living on a work campus in Changsha City, China, was conducted from December 1, 2014, to January 31, 2015. This unique quasiexperimental setting allowed for better characterization of air pollutant exposure effects because the participants spent most of their time in controlled indoor environments. Concentrations of indoor and outdoor ozone, along with the copollutants particulate matter, nitrogen dioxide, and sulfur dioxide, were monitored throughout the study period and then combined with time-activity information and filtration conditions of each residence and office to estimate 24-hour and 2-week combined indoor and outdoor mean exposure concentrations. Associations between each exposure measure and outcome measure were analyzed using single-pollutant and 2-pollutant linear mixed models controlling for ambient temperature, secondhand smoke exposure, and personal-level time-varying covariates.

Main Outcomes and Measures

Biomarkers indicative of inflammation and oxidative stress, arterial stiffness, blood pressure, thrombotic factors, and spirometry were measured at 4 sessions.

Results

Of the 89 participants, 25 (28%) were women and the mean (SD) age was 31.5 (7.6) years. The 24-hour ozone exposure concentrations ranged from 1.4 to 19.4 parts per billion (ppb), corresponding to outdoor concentrations ranging from 4.3 to 47.9 ppb. Within this range, in models controlling for a second copollutant and other potential confounders, a 10-ppb increase in 24-hour ozone was associated with mean increases of 36.3% (95% CI, 29.9%-43.0%) in the level of platelet activation marker soluble P-selectin, 2.8% (95% CI, 0.6%-5.1%) in diastolic blood pressure, 18.1% (95% CI, 4.5%-33.5%) in pulmonary inflammation markers fractional exhaled nitric oxide, and 31.0% (95% CI, 0.2%-71.1%) in exhaled breath condensate nitrite and nitrate as well as a -9.5% (95% CI, -17.7% to -1.4%) decrease in arterial stiffness marker augmentation index. A 10-ppb increase in 2-week ozone was associated with increases of 61.1% (95% CI, 37.8%-88.2%) in soluble P-selectin level and 126.2% (95% CI, 12.1%-356.2%) in exhaled breath condensate nitrite and nitrate level. Other measured biomarkers, including spirometry, showed no significant associations with either 24-hour ozone or 2-week ozone exposures.

Conclusions and Relevance

Short-term ozone exposure at levels not associated with lung function changes was associated with platelet activation and blood pressure increases, suggesting a possible mechanism by which ozone may affect cardiovascular health.

Volatile organic compounds (VOC), formaldehyde and nitrogen dioxide (NO2) in schools in Johor Bahru, Malaysia: Associations with rhinitis, ocular, throat and dermal symptoms, headache and fatigue

This paper studied associations between volatile organic compounds (VOC), formaldehyde, nitrogen dioxide (NO₂) and carbon dioxide (CO₂) in schools in Malaysia and rhinitis, ocular, nasal and dermal symptoms, headache and fatigue among students. Pupils from eight randomly selected junior high schools in Johor Bahru, Malaysia (N=462), participated (96%). VOC, formaldehyde and NO₂ were measured by diffusion sampling (one week) and VOC also by pumped air sampling during class. Associations were calculated by multi-level logistic regression adjusting for personal factors, the home environment and microbial compounds in the school dust. The prevalence of weekly rhinitis, ocular, throat and dermal symptoms were 18.8%, 11.6%, 15.6%, and 11.1%, respectively. Totally 20.6% had weekly headache and 22.1% fatigue. Indoor CO₂ were low (range 380-690 ppm). Indoor median NO₂ and formaldehyde concentrations over one week were 23μg/m³ and 2.0μg/m³, respectively. Median indoor concentration of toluene, ethylbenzene, xylene, and limonene over one week were 12.3, 1.6, 78.4 and 3.4μg/m³, respectively. For benzaldehyde, the mean indoor concentration was 2.0μg/m³ (median<1μg/m³). Median indoor levels during class of benzene and cyclohexane were 4.6 and 3.7μg/m³, respectively. NO₂ was associated with ocular symptoms (p<0.001) and fatigue (p=0.01). Formaldehyde was associated with ocular (p=0.004), throat symptoms (p=0.006) and fatigue (p=0.001). Xylene was associated with fatigue (p<0.001) and benzaldehyde was associated with headache (p=0.03). In conclusion, xylene, benzaldehyde, formaldehyde and NO₂ in schools can be risk factors for ocular and throat symptoms and fatigue among students in Malaysia. The indoor and outdoor levels of benzene were often higher than the EU standard of 5μg/m³.

Degradation of indoor limonene by outdoor ozone: A cascade of secondary organic aerosols

In indoor air, terpene-ozone reactions can form secondary organic aerosols (SOA) in a transient process. 'Real world' measurements conducted in a furnished room without air conditioning were modelled involving the indoor background of airborne particulate matter, outdoor ozone infiltrated by natural ventilation, repeated transient limonene evaporations, and different subsequent ventilation regimes. For the given setup, we disentangled the development of nucleated, coagulated, and condensed SOA fractions in the indoor air and calculated the time dependence of the aerosol mass fraction (AMF) by means of a process model. The AMF varied significantly between 0.3 and 5.0 and was influenced by the ozone limonene ratio and the background particles which existed prior to SOA formation. Both influencing factors determine whether nucleation or adsorption processes are preferred; condensation is strongly intensified by particulate background. The results provide evidence that SOA levels in natural indoor environments can surpass those known from chamber measurements. An indicator for the SOA forming potential of limonene was found to be limona ketone. Multiplying its concentration (in μg/m³) by 450(±100) provides an estimate of the concentration of the reacted limonene. This can be used to detect a high particle formation potential due to limonene pollution, e.g. in epidemiological studies considering adverse health effects of indoor air pollutants.

VOC exposures in California early childhood education environments

Little information exists about exposures to volatile organic compounds (VOCs) in early childhood education (ECE) environments. We measured 38 VOCs in single-day air samples collected in 2010-2011 from 34 ECE facilities serving California children and evaluated potential health risks. We also examined unknown peaks in the GC/MS chromatographs for indoor samples and identified 119 of these compounds using mass spectral libraries. VOCs found in cleaning and personal care products had the highest indoor concentrations (d-limonene and decamethylcyclopentasiloxane [D5] medians: 33.1 and 51.4 μg/m³, respectively). If reflective of long-term averages, child exposures to benzene, chloroform, ethylbenzene, and naphthalene exceeded age-adjusted "safe harbor levels" based on California's Proposition 65 guidelines (10^-5 lifetime cancer risk) in 71%, 38%, 56%, and 97% of facilities, respectively. For VOCs without health benchmarks, we used information from toxicological databases and quantitative structure-activity relationship models to assess potential health concerns and identified 12 VOCs that warrant additional evaluation, including a number of terpenes and fragrance compounds. While VOC levels in ECE facilities resemble those in school and home environments, mitigation strategies are warranted to reduce exposures. More research is needed to identify sources and health risks of many VOCs and to support outreach to improve air quality in ECE facilities.

Unexpectedly high concentrations of monoterpenes in a study of UK homes

The abundance of volatile organic compounds (VOCs) found in homes depends on many factors such as emissions, ventilation and the oxidative environment and these are evolving over time, reflecting changes in chemical use, behaviour and building design/materials. The concentrations of VOCs in 25 UK homes of varying ages, design and occupancy were quantified using continuous indoor air sampling over five days. Air was collected through low flow (1 mL min^-1) constant flow restrictors into evacuated 6 L internally silica-treated canisters until the canisters reached atmospheric pressure. This was followed by thermal desorption-gas chromatography and high mass accuracy time-of-flight mass spectrometry (TD-GC-TOF/MS). A fully quantitative analysis was performed on the eight most abundant hydrocarbon-based VOCs found. Despite differences in building characteristics and occupant numbers 94% of the homes had d-limonene or α-pinene as the most abundant VOCs. The variability seen across the 25 homes in concentrations of monoterpenes indoors was considerably greater than that of species such as isoprene, benzene, toluene and xylenes. The variance in VOCs indoors appeared to be strongly influenced by occupant activities such as cleaning with 5-day average concentrations of d-limonene ranging from 18 μg m^-3 to over 1400 μg m^-3, a peak domestic value that is possibly the highest yet reported in the literature.

Effects by inhalation of abundant fragrances in indoor air - An overview

Odorous compounds (odors) like fragrances may cause adverse health effects. To assess their importance by inhalation, we have reviewed how the four major abundant and common airborne fragrances (α-pinene (APN), limonene (LIM), linalool (LIL), and eugenol (EUG)) impact the perceived indoor air quality as odor annoyance, sensory irritation and sensitization in the airways. Breathing and cardiovascular effects, and work performance, and the impact in the airways of ozone-initiated gas- and particle phase reactions products have also been assessed. Measured maximum indoor concentrations for APN, LIM and LIL are close to or above their odor thresholds, but far below their thresholds for sensory irritation in the eyes and upper airways; no information could be traced for EUG. Likewise, reported risk values for long-term effects are far above reported indoor concentrations. Human exposure studies with mixtures of APN and LIM and supported by animal inhalation models do not support sensitization of the airways at indoor levels by inhalation that include other selected fragrances. Human exposure studies, in general, indicate that reported lung function effects are likely due to the perception rather than toxic effects of the fragrances. In general, effects on the breathing rate and mood by exposure to the fragrances are inconclusive. The fragrances may increase the high-frequency heart rate variability, but aerosol exposure during cleaning activities may result in a reduction. Distractive effects influencing the work performance by fragrance/odor exposure are consistently reported, but their persistence over time is unknown. Mice inhalation studies indicate that LIM or its reaction mixture may possess anti-inflammatory properties. There is insufficient information that ozone-initiated reactions with APN or LIM at typical indoor levels cause airway effects in humans. Limited experimental information is available on long-term effects of ozone-initiated reaction products of APN and LIM at typical indoor levels.

Physical properties and lung deposition of particles emitted from five major indoor sources

The physical properties of indoor particles were measured with an Scanning Mobility Particle Sizer (SMPS) system (14.6-850 nm), an Aerodynamic Particle Sizer (APS, 0.54-18 μm) and an Hygroscopic Tandem Differential Mobility Analyzer (H-TDMA) in an apartment located in an urban background site in Prague (Czech Republic) from 15 August to 8 September, 2014. The total particle maximum number concentration was 9.38 × 10⁴, 1.46 × 10⁵, 2.89 × 10⁴, 2.25 × 10⁵ and 1.57 × 10⁶ particles cm^-3 for particles released from vacuum cleaning, soap/W5 cleaning spray, smoking, incense burning and cooking (frying) activities, respectively. Particles emitted from cleaning activities showed unimodal number size distributions, with the majority of particles (>98.2 %) in the ultrafine size range (Dp <100 nm) and modes at a diameter of 19.8 nm for vacuum cleaning and 30.6 nm for soap/W5 cleaning. Smoking and incense burning predominantly generated particles in the accumulation mode with a count median diameter around 90-150 nm while cooking emissions showed a bimodal structure with a main mode at 47.8 nm. Particles from vacuum cleaning, incense burning, smoking and cooking emissions were found to be "nearly hydrophobic" with an average growth factor (G_f) around 1.01-1.10, while particles emitted from desk cleaning using organic compounds were found to be "less-hygroscopic" (G_f ∼1.12-1.16). Based on an adjusted MPPD model with a consideration of the hygroscopic properties of particles, the total lung deposition fractions of these particles by number when they penetrate into the human lung were 0.73 ± 0.02, 0.62 ± 0.03, 0.37 ± 0.03, 0.32 ± 0.03 and 0.49 ± 0.02 for vacuum cleaning, desk cleaning, smoking, incense burning and cooking, respectively.

Indoor terpene emissions from cooking with herbs and pepper and their secondary organic aerosol production potential

Cooking is widely recognized as an important source of indoor and outdoor particle and volatile organic compound emissions with potential deleterious effects on human health. Nevertheless, cooking emissions remain poorly characterized. Here the effect of herbs and pepper on cooking emissions was investigated for the first time to the best of our knowledge using state of the art mass spectrometric analysis of particle and gas-phase composition. Further, the secondary organic aerosol production potential of the gas-phase emissions was determined by smog chamber aging experiments. The emissions of frying meat with herbs and pepper include large amounts of mono-, sesqui- and diterpenes as well as various terpenoids and p-cymene. The average total terpene emission rate from the use of herbs and pepper during cooking is estimated to be 46 ± 5 gg-1Herbs min-1. These compounds are highly reactive in the atmosphere and lead to significant amounts of secondary organic aerosol upon aging. In summary we demonstrate that cooking with condiments can constitute an important yet overlooked source of terpenes in indoor air.

Eupafolin nanoparticles protect HaCaT keratinocytes from particulate matter-induced inflammation and oxidative stress

Exposure to particulate matter (PM), a major form of air pollution, can induce oxidative stress and inflammation and may lead to many diseases in various organ systems including the skin. Eupafolin, a flavonoid compound derived from Phyla nodiflora, has been previously shown to exhibit various pharmacological activities, including antioxidant and anti-inflammatory effects. Unfortunately, eupafolin is characterized by poor water solubility and skin penetration, which limits its clinical applications. To address these issues, we successfully synthesized a eupafolin nanoparticle delivery system (ENDS). Our findings showed that ENDS could overcome the physicochemical drawbacks of raw eupafolin with respect to water solubility and skin penetration, through reduction of particle size and formation of an amorphous state with hydrogen bonding. Moreover, ENDS was superior to raw eupafolin in attenuating PM-induced oxidative stress and inflammation in HaCaT keratinocytes, by mediating the antioxidant pathway (decreased reactive oxygen species production and nicotinamide adenine dinucleotide phosphate oxidase activity) and anti-inflammation pathway (decreased cyclooxygenase-2 expression and prostaglandin E2 production through downregulation of mitogen-activated protein kinase and nuclear factor-κB signaling). In summary, ENDS shows better antioxidant and anti-inflammatory activities than raw eupafolin through improvement of water solubility and skin penetration. Therefore, ENDS may potentially be used as a medicinal drug and/or cosmeceutical product to prevent PM-induced skin inflammation.