Agronomic benefits of biochar as a soil amendment after its use as waste water filtration medium

Biochar and vegetation effects on discharge water quality from organic-substrate green roofs

Green roofs have been increasingly used to improve stormwater management, but poor vegetation performance on roof systems, varying with vegetation type, can degrade discharge quality. Biochar has been suggested as an effective substrate additive for green roofs to improve plant performance and discharge quality. However, research on the effects of biochar and vegetation on discharge quality in the long term is lacking and the underlying mechanisms involved are unclear. We examined the effects of biochar amendment and vegetation on discharge quality on organic-substrate green roofs with pre-grown sedum mats and direct-seeded native plants for three years and investigated the key factors influencing discharge quality. Sedum mats reduced the leaching of nutrients and particulate matter by 6-64% relative to native plants, largely due to the higher initial vegetation cover of the former. Biochar addition to sedum mat green roofs resulted in the best integrated water quality due to enhanced plant cover and sorption effects. Structural equation modeling revealed that nutrient leaching was primarily influenced by rainfall depth, time, vegetation cover, and substrate pH. Although biochar-amended sedum mats showed better discharge quality from organic-substrate green roofs, additional ecosystem services may be provided by native plants, suggesting future research to optimize plant composition and cover and biochar properties for sustainable green roofs.

Engineered Bacillus subtilis Biofilm@Biochar living materials for in-situ sensing and bioremediation of heavy metal ions pollution

The simultaneous sensing and remediation of multiple heavy metal ions in wastewater or soil with microorganisms is currently a significant challenge. In this study, the microorganism Bacillus subtilis was used as a chassis organism to construct two genetic circuits for sensing and adsorbing heavy-metal ions. The engineered biosensor can sense three heavy metal ions (0.1-75 μM of Pb2+ and Cu2+, 0.01-3.5 μM of Hg2+) in situ real-time with high sensitivity. The engineered B. subtilis TasA-metallothionein (TasA-MT) biofilm can specifically adsorb metal ions from the environment, exhibiting remarkable removal efficiencies of 99.5% for Pb2+, 99.9% for Hg2+and 99.5% for Cu2+ in water. Furthermore, this engineered strain (as a biosensor and absorber of Pb2+, Cu2+, and Hg2+) was incubated with biochar to form a hybrid biofilm@biochar (BBC) material that could be applied in the bioremediation of heavy metal ions. The results showed that BBC material not only significantly reduced exchangeable Pb2+ in the soil but also reduced Pb2+ accumulation in maize plants. In addition, it enhanced maize growth and biomass. In conclusion, this study examined the potential applications of biosensors and hybrid living materials constructed using sensing and adsorption circuits in B. subtilis, providing rapid and cost-effective tools for sensing and remediating multiple heavy metal ions (Pb2+, Hg2+, and Cu2+).

Metal behavior and soil quality changes induced by the application of tailor-made combined biochar: An investigation at pore water scale

The remediation performance of biochar varies based on the biomass used for its production. Further innovation involves developing tailor-made biochar by combining different raw materials to compensate for the limitations of pure biochar. Therefore, tailor-made combined biochar produced from the co-pyrolysis of pig manure and invasive Japanese knotweed (P1J1), as well as biochars produced from these feedstocks separately, i.e., pure pig manure (PM) and pure Japanese knotweed (JK), were applied to Pb and As contaminated soil to evaluate the biochar-induced changes on soil properties, microbial activity, DOM, and metal and metalloids solubility at the soil pore water scale. Biochar application reduced soluble Pb, whereas enhanced the As mobility; the increased soil pH after biochar addition played a fundamental role in reducing the Pb solubility, as revealed by their significant negative correlation (r = -0.990, p < 0.01). In contrast, the release of dissolved P strongly influenced As mobilization (r = 0.949, p < 0.01), especially in P-rich PM and P1J1 treatments, while JK showed a marginal effect in mobilizing As. Soils treated with PM, P1J1, and JK mainly increased Gram-negative bacteria by 56 %, 52 %, and 50 %, respectively, compared to the control. Fluorescence excitation-emission matrix spectroscopy combined with parallel factor analysis identified three components in pore water DOM, C1 (long wavelength humic-like), C2 (short wavelength humic-like), and C3 (protein-like), which were dominant respectively in the P1J1, JK, and PM-added soil. A principal component analysis (PCA) confirmed that the PM and P1J1 had similar performance and were more associated with releasing P and Mg and specific DOM components (C1 and C3). Meanwhile, P1J1 supplemented soil OM/OC and K, similar to JK. The results of this study suggest that combined biochar P1J1 can comprehensively enhance soil quality, embodying the advantages of pure PM and JK biochar while overcoming their shortcomings.

Removal of heavy metals from binary and multicomponent adsorption systems using various adsorbents - a systematic review

The ecosystem and human health are both significantly affected by the occurrence of potentially harmful heavy metals in the aquatic environment. In general, wastewater comprises an array of heavy metals, and the existence of other competing heavy metal ions might affect the adsorptive elimination of one heavy metal ion. Therefore, to fully comprehend the adsorbent's efficiency and practical applications, the abatement of heavy metals in multicomponent systems is important. In the current study, the multicomponent adsorption of heavy metals from different complex mixtures, such as binary, ternary, quaternary, and quinary solutions, utilizing various adsorbents are reviewed in detail. According to the systematic review, the adsorbents made from locally and naturally occurring materials, such as biomass, feedstocks, and industrial and agricultural waste, are effective and promising in removing heavy metals from complex water systems. The systematic study further discovered that numerous studies evaluate the adsorption characteristics of an adsorbent in a multicomponent system using various important independent adsorption parameters. These independent adsorption parameters include reaction time, solution pH, agitation speed, adsorbent dosage, initial metal ion concentration, ionic strength as well as reaction temperature, which were found to significantly affect the multicomponent sorption of heavy metals. Furthermore, through the application of the multicomponent adsorption isotherms, the competitive heavy metals sorption mechanisms were identified and characterized by three primary kinds of interactive effects including synergism, antagonism, and non-interaction. Despite the enormous amount of research and extensive data on the capability of different adsorbents, several significant drawbacks hinder adsorbents from being used practically and economically to remove heavy metal ions from multicomponent systems. As a result, the current systematic review provides insights and perspectives for further studies through the thorough and reliable analysis of the relevant literature on heavy metals removal from multicomponent systems.

Identifying global status and research hotspots of heavy metal remediation: A phase upgrade study

Impact of heavy metal (HM) pollution and its understanding on environment as well as human beings has grown a lot during the last few decades. The goal of this study is to create a scientometric study on heavy metal contamination, in the period 1989 to 2020, in order to provide futuristic goals for the new researchers on wastewater treatment. For this, a search was conducted in the Web of Science (WoS) and Scopus databases, related to heavy metal pollution. Totally, 37,154 records were collected during the study period from 1989 to 2020. The findings revealed that China, the United States, and India has most referenced papers across a wide range of trans disciplinary issues such as toxicity, technology, and pollution. As a result, this study concludes that more research on various treatment methods is required in order to obtain high-quality water for consumption and routine activities, with the incorporation of various treatment tasks poses various challenges for the upcoming future studies.

Enhancement of soil physical properties and soil water retention with biochar-based soil amendments

The soil physical properties are deteriorating due to changing rainfall patterns and intensities, as well as climate change-induced temperature fluctuations. Pot experiments were carried out to examine the impacts of synthesized soil amendments on soil water retention and plant growth. Soil amendments (biochar, polyacrylamide (PAM), and moringa) were used at different rates (0 (control), 2.1, 4.2, and 8.3 g kg^-1) to improve the physical properties of the soil. As a result of soil amendment application, it was found that the mean weight diameter of soil aggregate increased by 188% during the 8.3 g kg^-1 treatment, forming stable soil particles. Soil water retention improved by up to 128.9% during the 8.3 g kg^-1 treatment, and it was analyzed that it was due to the high surface area of biochar, porosity, and high molecular weight of PAM. Pellet treatment increased all plant growth parameters (height, stem diameter, leaf number, and fresh and dry weight) for both beans and maize. The dry weight of beans (C₃ plant) and maize (C₄ plant) increased by 92.9 and 146.4%, respectively in an 8.3 g kg^-1 pot. The soil physical condition was stabilized by the high carbon content of biochar and the improvement of soil coagulation between PAM and moringa. This had a positive effect on the C₄ plant. The findings of this study indicate that if the soil amendments are properly mixed and applied based, they will improve soil stability and plant productivity.

Biochar Combined with Nitrogen Alters Rhizosphere Soil Nutrients and Microbial Communities, and Promotes Growth of Moso Bamboo Seedlings

Biochar, a soil conditioner, has the potential to improve soil properties and plant productivity. However, in forestry planting, especially in subtropical moso bamboo forests, the response of seedling growth to biochar addition is still not well known. We conducted a comprehensive factorial experiment with biochar and nitrogen (N) addition as factors (no biochar and no N addition; 0.64% biochar + 0% NH4NO3; 1.28% biochar + 0% NH4NO3; T3: 0% biochar + 1.28% NH4NO3; T4: 0.64% biochar + 1.28% NH4NO3; T5: 1.28% biochar + 1.28% NH4NO3) to study their effects on moso bamboo seedling growth, rhizosphere soil nutrient contents, and enzymatic activity. Our results indicate that applying biochar without N did not promote the growth of moso bamboo seedlings (biomass of leaves and branches) but increased soil nutrient content and affected soil-enzyme activity. The combined application of biochar and N significantly increased the leaf and branch biomass of moso bamboo seedlings and soil nutrient content and affected soil-enzyme activity. In conclusion, biochar should be mixed with an adequate amount of N for its application in subtropical moso bamboo forests to promote seedling growth and improve economic benefits.

Biochar application with reduced chemical fertilizers improves soil pore structure and rice productivity

Biochar is an efficient amendment to improve soil quality and crop productivity, but the potential of biochar as a substitute for chemical fertilizers is still unknown. Here we conducted a 6-year field experiment to investigate how partial substitution of biochar to NPK fertilizers affect soil quality and rice yield in the northeast of China. The experiment included three treatments: Control (B0: NPK fertilizers only: 240 kg N ha^-1, 52 kg P ha^-1, and 100 kg K ha^-1); Low-input biochar (B1.5: 95% N, 89% P, 75% K + 1.5 t biochar ha^-1 year^-1); and High-input biochar (B3.0: 90% N, 78% P, 50% K + 3.0 t biochar ha^-1 year^-1). The amounts of NPK application in the biochar treatments were determined according to an equivalent method. We evaluated the soil pore structure characteristics via a CT technology, and investigated soil nutrients, plant biomass, root growth, and grain yields. The results showed that, after the 6-year application, the soil pore structure and rice productivity of B1.5 were significantly improved in compared to those of B0 and B3.0. B1.5 had similar soil available NPK contents, but 6.6% higher rice yield as compared to B0, because of increased root length density (33.2%) and aboveground biomass (10.2%). B1.5 also increased soil macroporosity (>100 μm) (141.4%), fraction dimension (8.4%), and pore connectivity (16.6%) in compared with those of B0. However, B3.0 showed the lowest rice yield due to lower soil available N content (19.2%), macroporosity (28.5%), fraction dimension (5.5%), and pore connectivity (85.3%) than B0. This study demonstrated that a moderate NPK fertilizer replacement by biochar could be an effective practice that improves soil quality, increases rice growth and yield, and reduces the input of chemical fertilizers for rice production.

Insight into the effects of regulating denitrification on composting: Strategies to simultaneously reduce environmental pollution risk and promote aromatic humic substance formation

Denitrification during composting is a hidden danger that causes environmental pollution risk and aromatic humic substance damage, which needs to be better regulate urgently. In this study, two denitrification regulation methods, moisture and biochar amendment, were conducted during chicken manure composting. Denitrification performance data showed two regulation methods obviously reduced NO₃^--N, NO₂^--N and N₂ contents. Humic substance increased by 25.3 % and 29.1 % under two regulations. Microbiological analysis indicated that two regulation methods could decreasing denitrifying functional microbes with aroma degradation capability. Subsequently, denitrification gene narG, nirS, nosZ were significantly inhibited (p < 0.05) and the aromatic degradation metabolism pathways were down-regulated. Correlation analysis further revealed the important influence of interspecific interactions and non-biological characteristics on functional microbes. These results provided important scientific basis to denitrification regulation in the practice of composting, which achieved the purpose of simultaneously controlling environmental pollution risk and conducing end-product formation.

Assessing the influence of pore structure formation on heavy metal immobilization through image-based CFD

Porous media are widely adopted as immobilization sorbents in environmental engineering. The microscale difference in pore structure formation causes significant deflection in a vast landscape. Computational fluid dynamics (CFD) offers a comparative approach to evaluate the individual influence from pore structure formation with strictly controlled surface and volume properties. This paper presents a comprehensive comparison between the performance of cylindrical media and spherical-media in heavy metal immobilization. Digital testing was performed to measure the surface area, specific surface area, density and porosity. Image-based input technique was developed to reconstruct the cylindrical media. It was found that although the surface area, specific surface area and porosity were the same, the spherical media still had an accelerated immobilization rate. Results further showed that the spherical media in floatation arrangement had an immobilization rate of 16% higher than the cylindrical media with the same surface properties. Non-floatation arrangement of the spherical media caused a reduction in immobilization capacity up to 32.8% lower than the cylindrical media. The cylindrical media demonstrated an advantage of being structurally stable under high porosity, the latter of which resulted in an increased immobilization capacity compared with the spherical-media. The results suggest that the cylindrical bio-microstructure is desirable for heavy metal immobilization in a non-flotational environment. The computational approach provides a digital solution to evaluate the immobilization in 3D architected media. The proposed testing methods are feasible for both experimentally obtained images and structures from algorithm-generation.

Ecofriendly remediation technologies for wastewater contaminated with heavy metals with special focus on using water hyacinth and black tea wastes: a review

Treatment of water contaminated with heavy metals is challenging. Heavy metals are non-degradable, persistent in the environment, have a high dispersion capacity by water, can bioaccumulate, and represent risks to human and environmental health. Conventional treatment methods have disadvantages; however, adsorption in biomass is a highly promising method with high efficiency and low cost that avoids many of the disadvantages of conventional methods. Black tea (BT) wastes and water hyacinth (WH) have attracted attention for their ability to remove heavy metals from wastewater. Utilizing these approaches can remove contaminants and effectively manage problematic invasive species and wastes. The conventional uses of BT and WH were efficient for removing heavy metals from wastewater. Due to the unique and distinct properties and advantages of biochar and nano-forms of biosorbents, the use of BT and WH in these forms is promising to achieve sustainable heavy metals removal from wastewater. However, more study is needed to confirm preliminary results.

(3-Aminopropyl)triethoxysilane and iron rice straw biochar composites for the sorption of Cr (VI) and Zn (II) using the extract of heavy metals contaminated soil

Heavy metals like Cr (VI), when released into the environment, pose a serious threat to animal and human health. In this study, iron and (3-Aminopropyl)triethoxysilane (APTES) biochar composites were prepared from the biochar, which was produced through the pyrolysis of rice straw at 400 and 600 °C, using the chemical processes with an aim that the doping of pristine biochar structure with the Fe and NH₂ radicals would enhance the removal of Cr (VI) and Zn (II) adsorption in both aqueous solution and soil. Both biochar composites were mixed at a rate of 3% (w/w) with the mine soil for the soil incubation test, and after completion of the test, a soil fertility index (SFI) was calculated. Results showed that both iron and APTES biochar composites followed the Langmuir-Freundlich isotherm showing the maximum removal capacity of 100.59 mg/g for Cr (VI) by APTES/SiBC 600 and maximum adsorption capacity of 83.92 mg/g for Zn²⁺ by Fe/BC 400. The SFI of the mine-soil amended with both Fe and APTES biochar composites were 16.67 and 13.04%, respectively higher than the controlled study. The mitotic index of the A. cepa cells that grew up in the soil amended with Fe/BC and APTES/SiBC were 40.47 and 44.45%, respectively, higher than the controlled study. The results indicated that the incorporation of the Fe and APTES biochar composites in the soil effectively reduced the metal toxicity and improved the soil physicochemical properties. This study opens up the prospects of using biochar composites in contaminated soil and water treatments.

Emerging nano-structured innovative materials as adsorbents in wastewater treatment

Water supply around the globe is struggling to meet the rapidly increasing demand by the population, drastic changes in climate and degrading water quality. Even though, many large-scale methods are employed for wastewater treatment they display several negative impacts owing to the presence of pollutants. Technological innovation is required for integrated water management with different groups of nanomaterials for the removal of toxic metal ions, microbial disease, organic and inorganic solutes. The method of manipulating atoms on a nanoscale is nanotechnology. Nanomembranes are used in nanotechnology to soften water and eliminate physical, chemical and biological pollutants. The present review concentrates on various nanotechnological approaches in wastewater remedy, mechanisms involved to promote implementation, benefits and limitations in comparison with current processes, properties, barriers and commercialization research needs. Also the review identifies opportunities for further exploiting the exclusive features for green water management by following the advances in nanotechnology.

Biochar for Wastewater Treatment—Conversion Technologies and Applications

Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Slow sand filtration of raw wastewater using biochar as an alternative filtration media

The efficiency of anaerobic biofilters (AnBF) as low-cost wastewater treatment systems was investigated. Miscanthus-biochar was used as filtration media and compared with sand as a common reference material. Raw sewage from a municipal wastewater treatment plant was stored in a sedimentation tank for two days to allow pre-settlement of wastewater particles. Subsequently, wastewater was treated by AnBFs at 22 °C room temperature at a hydraulic loading rate of 0.05 m∙h^-1 with an empty bed contact time of 14.4 h and a mean organic loading rate of 509 ± 173 g_COD∙m^-3∙d^-1. Mean removal of chemical oxygen demand (COD) of biochar filters was with 74 ± 18% significantly higher than of sand filters (61 ± 12%). In contrast to sand filters with a mean reduction of 1.18 ± 0.31 log-units, E. coli removal through biochar was with 1.35 ± 0.27 log-units significantly higher and increased with experimental time. Main removal took place within the schmutzdecke, a biologically active dirt layer that develops simultaneously on the surface of filter beds. Since the E. coli contamination of both filter materials was equal, the higher removal efficiency of biochar filters is probably a result of an improved biodegradation within deeper zones of the filter bed. Overall, performance of biochar filters was better or equal compared to sand and have thus demonstrated the suitability of Miscanthus-biochar as filter media for wastewater treatment.

On-farm wastewater treatment using biochar from local agroresidues reduces pathogens from irrigation water for safer food production in developing countries

In this study, the suitability of an anaerobic biofilter (AnBF) as an efficient and low-cost wastewater treatment for safer irrigation water production for Sub-Saharan Africa was investigated. To determine the influence of different ubiquitous available materials on the treatment efficiency of the AnBF, rice husks and their pyrolysed equivalent, rice husk biochar, were used as filtration media and compared with sand as a common reference material. Raw sewage from a municipal full-scale wastewater treatment plant pretreated with an anaerobic filter (AF) was used in this experiment. The filters were operated at 22 °C room temperature with a hydraulic loading rate of 0.05 m·h^-1 for 400 days. The mean organic loading rate (OLR) of the AF was 194 ± 74 and 63 ± 16 g_COD·m^-3·d^-1 for the AnBF. Fecal indicator bacteria (FIB) (up to 3.9 log₁₀-units), bacteriophages (up to 2.7 log₁₀-units), chemical oxygen demand (COD) (up to 94%) and turbidity (up to 97%) could be significantly reduced. Additionally, the essential plant nutrients nitrogen and phosphorous were not significantly affected by the water treatment. Overall, the performance of the biochar filters was significantly better than or equal to the sand and rice husk filters. By using the treated wastewater for irrigating lettuce plants in a pot experiment, the contamination with FIB was >2.5 log-units lower (for most of the plants below the detection limit of 5.6 MPN per gram fresh weight) than for plants irrigated with raw wastewater. Respective soil samples were minimally contaminated and nearly in the same range as that of tap water.

Changes in nitrogen related functional genes along soil pH, C and nutrient gradients in the charosphere

The interface between biochar and soil differs from both the bulk soil and the biochar itself, and has been termed the "charosphere". However, a complete definition of the charosphere, including aspects of size, properties, functional reach and effects on soil processes, is still required. In this study, the distributions of functional genes related to the soil N cycle within the charosphere were investigated over a multi-sectional gradient. We found that concentrations of dissolved organic carbon (DOC), available phosphorus and exchangeable cations (Ca²⁺, Mg²⁺, K⁺) increased with proximity to the biochar surface (termed the 'near charosphere'). Similarly, the abundance of bacterial amoA was greater in the near charosphere, while archaeal amoA abundance was relatively homogenous. This taxonomic asymmetry resulted in a shift in the predominant ammonia-oxidizers from ammonia-oxidizing bacteria (AOB) to ammonia-oxidizing archaea (AOA) in the far charosphere. This was associated with other factors such as decreasing pH and carbon availability with increasing distance from the biochar. Moreover, the ratio of nosZ/(nirS + nirK) genes also showed functionally asymmetry in the charosphere: increasing with increasing distance from the biochar. This is the first study to map spatial distributions of a set functional genes related to soil N cycling in the soil around biochar. This exploration into the underlying heterogeneity of biochar-affected mechanisms of N transformation provides new insight into the functional geometry of the charosphere.