Iron solubility in fine particles associated with secondary acidic aerosols in east China

Influence of sources and atmospheric processes on metal solubility in PM2.5 in urban Guangzhou, South China

Water-soluble metals exert a significant influence on human and ecosystem health. In this study, a comprehensive investigation was undertaken to elucidate the solubilities of metals in PM2.5 and potential influencing factors during the dry season of 2019-2020 in urban Guangzhou, South China. The observed average solubility was <20 % for Al, Fe, Sn, and Ti; 20-40 % for V, Cr, Sb, Pb, and Ni; 40-60 % for Ba and Cu; and 60-80 % for Zn, As, Se, Cd, and Mn. Metals (Al, Ti, and Fe) originated from crustal sources (e.g., soil dust) have much lower solubilities than those (Mn, Zn, As, Se, Cd, and Ba) from fossil fuel combustion sources (e.g., traffic emission, coal combustion), suggesting the dominant role the metal sources played on solubility. Enhanced solubilities of Cu, As, Se, Cd, Sn, Sb, and Pb were associated with aerosol acidity, while those of V, Cr, Mn, Ni, Zn, and Ba were linked to organic acid complexation. For the three crustal metals, the solubilities of Al and Ti primarily depended on aerosol acidity, whereas the solubility of Fe depended on both aerosol acidity under pH < 2 conditions and organic acid complexation under pH > 2 conditions. These findings underscore the primary influence of inherent properties of the metals on their solubility and reveal the varying impacts of atmospheric physicochemical processes, with changes in their solubilities being <10 % for Cd, Sn, Sb, and Pb, 10-20 % for Cu, Cr, Mn, Ni, and Ba, and 20-30 % for As, Se, and Zn.

Dominant Contribution of Non-dust Primary Emissions and Secondary Processes to Dissolved Aerosol Iron

Solubility largely determines the impacts of aerosol Fe on marine ecosystems and human health. Currently, modeling studies have large uncertainties in aerosol Fe solubility due to inadequate understanding of the sources of dissolved Fe. This work investigated seasonal variations of Fe solubility in coarse and fine aerosols in Qingdao, a coastal city in the Northwest Pacific, and utilized a receptor model for source apportionment of total and dissolved aerosol Fe. Desert dust was found to be the main source of total Fe, contributing 65 and 81% annually to total Fe in coarse and fine particles, respectively; in contrast, dissolved aerosol Fe originated primarily from combustion, industrial, and secondary sources. The annual average contributions to dissolved Fe in coarse and fine particles were 68 and 47% for the secondary source and 32 and 33% for the combustion source, respectively. Aerosol Fe solubility was found to be highest in summer and lowest in spring, showing seasonal patterns similar to those of aerosol acidity. Increase in Fe solubility in atmospheric particles, when compared to desert dust, was mainly caused by secondary processing and combustion emission, and the effect of secondary processes was dictated by aerosol acidity and liquid water content.

Effects of copper on chemical kinetics and brown carbon formation in the aqueous ˙OH oxidation of phenolic compounds

Many phenolic compounds (PhCs) in biomass burning and fossil fuel combustion emissions can partition into atmospheric aqueous phases (e.g., cloud/fog water and aqueous aerosols) and undergo reactions to form secondary organic aerosols (SOAs) and brown carbon (BrC). Redox-active transition metals, particularly Fe and Cu, are ubiquitous species in atmospheric aqueous phases known to participate in Fenton/Fenton-like chemistry as a source of aqueous ˙OH. However, even though the concentrations of water-soluble Cu are close to those of water-soluble Fe in atmospheric aqueous phases in some areas, unlike Fe, the effects that Cu have on SOA and BrC formation in atmospheric aqueous phases have scarcely been studied and remain poorly understood. We investigated the effects of Cu(II) on PhC reaction rates and BrC formation during the aqueous oxidation of four PhCs (guaiacol, catechol, syringol, and vanillin) by ˙OH generated from Fenton-like chemistry under different pH conditions. While the PhCs reacted when both H2O2 and Cu(II) were present in the absence (i.e., dark oxidation) and presence (i.e., photooxidation) of light, the reaction rates were at least one order of magnitude higher during photooxidation. Higher PhC reaction rates were measured at higher pH during both dark oxidation and photooxidation as a result of higher ˙OH concentrations produced by Fenton-like chemistry. Only water-soluble BrC was formed during dark oxidation and photooxidation when Cu(II) was present. Mass absorption coefficients (103 to 104 cm2 g-1) comparable to those of biomass burning BrC were measured during dark oxidation and photooxidation when Cu(II) was present. Light absorption was enhanced at higher pH during dark oxidation and photooxidation, which indicated that higher quantities and/or more absorbing BrC chromophores were formed at higher pH. The effects that Cu(II) had on the PhC reaction rates and the composition of SOAs and BrC formed depended on the PhC base structure (i.e., benzenediol vs. methoxyphenol). Overall, these results show how aqueous reactions involving Cu(II), H2O2, and PhCs can be an efficient source of daytime and nighttime water-soluble BrC and SOAs, which can have significant implications for how the atmospheric fates of PhCs are modeled for areas with substantial concentrations of water-soluble Cu in highly to moderately acidic cloud/fog water and aqueous aerosols.

Impact of Molecular Chlorine Production from Aerosol Iron Photochemistry on Atmospheric Oxidative Capacity in North China

Elevated levels of atmospheric molecular chlorine (Cl2) have been observed during the daytime in recent field studies in China but could not be explained by the current chlorine chemistry mechanisms in models. Here, we propose a Cl2 formation mechanism initiated by aerosol iron photochemistry to explain daytime Cl2 formation. We implement this mechanism into the GEOS-Chem chemical transport model and investigate its impacts on the atmospheric composition in wintertime North China where high levels of Cl2 as well as aerosol chloride and iron were observed. The new mechanism accounts for more than 90% of surface air Cl2 production in North China and consequently increases the surface air Cl2 abundances by an order of magnitude, improving the model's agreement with observed Cl2. The presence of high Cl2 significantly alters the oxidative capacity of the atmosphere, with a factor of 20-40 increase in the chlorine radical concentration and a 20-40% increase in the hydroxyl radical concentration in regions with high aerosol chloride and iron loadings. This results in an increase in surface air ozone by about 10%. This new Cl2 formation mechanism will improve the model simulation capability for reactive chlorine abundances in the regions with high emissions of chlorine and iron.

The important role of nitrate in iron and manganese dissolution and sulfate formation in fine particles at a coastal site in Northern China

Bioavailable transition trace elements, such as soluble iron (Fes) and soluble manganese (Mns) in aerosols, play a crucial role in atmospheric sulfate formation and marine ecosystems. In this study conducted during the spring of 2017 in Qingdao, a coastal city in Northern China, we applied a combined approach of multiple linear regression (MLR) incorporating the results of positive matrix factorization (PMF) to estimate the solubility of Fe and Mn from various sources. PMF analysis showed that dust was the largest contributor to total Fe (FeT) (45.5 %), followed by non-ferrous smelting (20.3 %) and secondary formation processes (17.8 %). However, secondary formation processes (33.2 %), vehicle exhaust (19.3 %) and aqueous-phase processes (19.0 %) were found to be the primary contributors to Fes. For total Mn (MnT) and Mns, dust (21.2 % ∼ 35.0 %), secondary formation processes (20.3 % ∼ 25.6 %) and industry (12.6 % ∼ 16.3 %) were identified as the dominant contributors. The solubilities of Fe and Mn varied significantly depending on their sources. Interestingly, nitrate played a more pronounced role than sulfate in facilitating the dissolution of Fe and Mn during the acid processing due to the high molar ratio of NO3-/2SO42- (1.72 ± 0.54) under the average RH of 56 % ± 15 %. This phenomenon suggested that the acid processing was primarily triggered by nitrate formation due to the low deliquescence relative humidity (DRH) of nitrate. Additionally, we discovered that the catalytic oxidation of SO2 in aerosol water was primarily driven by Fe rather than Mn, serving as a more significant pathway for sulfate formation within a pH range of 2.0 to 4.4. These findings provide valuable insights into the impact of acidification on the dissolution of Fe and Mn under conditions of moderate RH in the real ambient atmosphere with the increasing of NO3-/2SO42- molar ratio.

Characterization of Fe-containing particles in Chengdu, southwest China, using single-particle aerosol mass spectrometry

Single-particle aerosol mass spectrometry was used to study the characteristics of Fe-containing particles during winter in Chengdu, southwest China. The mass concentrations of PM2.5 and PM10 during the study period were 64 ± 38 and 89 ± 49 µg/m3, respectively, and NO2 and particulate matter were high compared with most other regions of China. The Fe-containing particles were divided into seven categories with different mass spectra, sources and aging characteristics. The highest contribution was from Fe mixed with carbonaceous components (Fe-C, 23.1%) particles. Fe was more mixed with sulfate than nitrate and therefore the contribution of Fe mixed with sulfate (Fe-S, 20.7%) particles was higher than that of Fe mixed with nitrate (Fe-N, 12.5%) particles. The contributions from Fe-containing particles related to primary combustion were high in the small particle size range, whereas aged Fe-containing particles and dust-related particles were mostly found in the coarse particle size range. The air masses mainly originated from the west and east of Chengdu, and the corresponding PM2.5 concentrations were 79 ± 36 and 55 ± 36 µg/m3, respectively. The west and east air masses showed stronger contributions of Fe-containing particles related to biomass burning (Fe-B) and fossil fuel combustion (Fe-C and Fe-S) particles, respectively. The southwest area contributed the most Fe-containing particles. Future assessments of the effects of Fe-containing particles during heavy pollution period should pay more attention to Fe-C and Fe-S particles. Emission-reduction of Fe-containing particles should consider both local emissions and short-distance transmission from the surrounding areas.

Assessment of Secondary Sulfate Aqueous-Phase Formation Pathways in the Tropical Island City of Haikou: A Chemical Kinetic Perspective

Sulfate (SO42-) is an essential chemical species in atmospheric aerosols and plays an influential role in their physical-chemical characteristics. The mechanisms of secondary SO42- aerosol have been intensively studied in air-polluted cities. However, few studies have focused on cities with good air quality. One-year PM2.5 samples were collected in the tropical island city of Haikou, and water-soluble inorganic ions, as well as water-soluble Fe and Mn, were analyzed. The results showed that non-sea-salt SO42- (nss-SO42-) was the dominant species of water-soluble inorganic ions, accounting for 40-57% of the total water-soluble inorganic ions in PM2.5 in Haikou. The S(IV)+H2O2 pathway was the main formation pathway for secondary SO42- in wintertime in Haikou, contributing to 57% of secondary SO42- formation. By contrast, 54% of secondary SO42- was produced by the S(IV)+Fe×Mn pathway in summer. In spring and autumn, the S(IV)+H2O2, S(IV)+Fe×Mn, and S(IV)+NO2 pathways contributed equally to secondary SO42- formation. The ionic strength was the controlling parameter for the S(IV)+NO2 pathway, while pH was identified as a key factor that mediates the S(IV)+H2O2 and S(IV)+Fe×Mn pathways to produce secondary SO42-. This study contributes to our understanding of secondary SO42- production under low PM2.5 concentrations but high SO42- percentages.

Long-term variation, solubility and transport pathway of PM2.5-bound iron in a megacity of northern China

Although particulate Fe has a significant impact on human health, atmospheric chemical reactions, air quality, climate change, and ecosystems, there is a lack of long-term continuous hourly observation on particulate Fe in the megacity of Beijing, limiting research on these issues. To address this gap, this study continuously measured hourly concentrations of Fe in PM2.5 from October 2018 to October 2022 in Beijing. The results indicate an overall decline in Fe concentrations, consistent with previous studies in Beijing. This decline can be attributed to multiple factors, such as reduced coal consumption, restrictions on biomass burning, increased use of clean energy, advanced technologies for industrial emission reduction, and efforts to control fugitive dust. Seasonal variations in Fe concentrations were similar across the various years, with higher mean concentrations in spring, fall, and winter, and lower levels in summer. Daily variations in PM2.5-bound Fe concentrations exhibited two peaks, influenced by changes in emission intensity and the evolution of the planetary boundary layer. The solubility of PM2.5-bound Fe exhibited a wide range, varying from 4 % to 95 %, surpassing previously reported source-specific values. This variability can be attributed to acid dissolution effects and complexation behaviors. Nonparametric wind regression analysis identified distinct hotspots (higher concentrations) in the northwest wind sector at wind speeds of approximately 5-15 km/h, which are associated with blowing dust and dust storms. Additionally, the potential source contribution function analysis identified high-potential source areas were precisely located in the northwestern, western, and southern regions of Beijing, rather than primarily in the southern areas recorded in a previous study. This research provides valuable insights for studying the health effects and migration and transformation of nutrient elements, particularly particulate Fe, in Beijing.

Recent Progress in Atmospheric Chemistry Research in China: Establishing a Theoretical Framework for the "Air Pollution Complex"

Atmospheric chemistry research has been growing rapidly in China in the last 25 years since the concept of the "air pollution complex" was first proposed by Professor Xiaoyan TANG in 1997. For papers published in 2021 on air pollution (only papers included in the Web of Science Core Collection database were considered), more than 24 000 papers were authored or co-authored by scientists working in China. In this paper, we review a limited number of representative and significant studies on atmospheric chemistry in China in the last few years, including studies on (1) sources and emission inventories, (2) atmospheric chemical processes, (3) interactions of air pollution with meteorology, weather and climate, (4) interactions between the biosphere and atmosphere, and (5) data assimilation. The intention was not to provide a complete review of all progress made in the last few years, but rather to serve as a starting point for learning more about atmospheric chemistry research in China. The advances reviewed in this paper have enabled a theoretical framework for the air pollution complex to be established, provided robust scientific support to highly successful air pollution control policies in China, and created great opportunities in education, training, and career development for many graduate students and young scientists. This paper further highlights that developing and low-income countries that are heavily affected by air pollution can benefit from these research advances, whilst at the same time acknowledging that many challenges and opportunities still remain in atmospheric chemistry research in China, to hopefully be addressed over the next few decades.

Water-soluble iron in PM2.5 in winter over six Chinese megacities: Distributions, sources, and environmental implications

Water-soluble iron (ws-Fe) in PM_2.5 plays a crucial role in biogeochemical cycles and atmospheric chemical processes. The anthropogenic sources of ws-Fe have attracted considerable attention owing to its high solubility. However, few studies have investigated the content of PM_2.5 ws-Fe in the urban environment. In the present study, we characterized the spatial distributions of ws-Fe in six Chinese megacities in the winter of 2019. Furthermore, we investigated the speciation of PM_2.5 ws-Fe (ws-Fe(II) and ws-Fe(III)), potential sources of ws-Fe, and association between ws-Fe and particle-bound reactive oxygen species (ROS). Higher ws-Fe concentrations were observed in northern cities (Harbin, Beijing, and Xi'an) than in southern cities (Chengdu, Wuhan, and Guangzhou). Moreover, atmospheric ws-Fe concentrations in urban China were several folds higher than those in urban areas of the United States and several orders of magnitude higher than those in remote oceans, indicating that China is a key contributor to global atmospheric ws-Fe. The dominant form of ws-Fe was ws-Fe(III) in Beijing, whereas ws-Fe(II) was more abundant in the other five cities. The concentrations of ws-Fe and ws-Fe(II) concentrations increased with increasing PM_2.5 levels in all the six cities, however, we did not observe any consistent pattern of ws-Fe(III) concentration. Biomass burning was a dominant source of ws-Fe in all cities except Beijing. A strong positive correlation was observed between particle-bound ROS content and ws-Fe; this finding is consistent with those of previous studies indicating that ws-Fe in PM_2.5 notably influences atmospheric chemical processes and human health.

Aerosol Iron Solubility Specification in the Global Marine Atmosphere with Machine Learning

Aerosol iron (Fe) solubility is a key factor for the assessment of atmospheric nutrients input to the ocean but poorly specified in models because the mechanism of determining the solubility is unclear. We develop a deep learning model to project the solubility based on the data that we observed in a coastal city of China. The model has five variables: the size range of particles, relative humidity, and the ratios of sulfate, nitrate and oxalate to total Fe (TFe) contents in aerosol particles. Results show excellent statistical agreements with the solubility in the literature over most worldwide seas and margin areas with the Pearson correlation coefficients (r) as large as 0.73-0.97. The exception is the Atlantic Ocean, where good agreement is obtained with the model trained using local data (r: 0.34-0.66). The model further uncovers that the ratio of oxalate/TFe is the most important variable influencing the solubility. These results indicate the feasibility of treating the solubility as a function of the six factors in deep learning models with careful training and validation. Our model and projected solubility provide innovative options for better quantification of air-to-sea input of aerosol soluble Fe in observational and model studies in the global marine atmosphere.

Emerging investigator series: aqueous-phase processing of atmospheric aerosol influences dissolution kinetics of metal ions in an urban background site in the Po Valley

Metals are an important atmospheric aerosol component; their impacts on health and the environment depend also on their solubility, dissolution kinetics and chemical form in which they are present in the aerosol (e.g., oxidation state, inorganic salt or oxide/hydroxide, organic complex). In this study, we investigated the impact of fog processing on the solubility and dissolution of metals in PM_2.5 samples collected in an urban background site in Padova (Italy). For each sample, we determined the solubility and dissolution kinetics of 17 elements in a solution simulating fog water in the winter season in the Po Valley (pH 4.7, T 5 °C, and water content ∼0.5 g m^-3). We also determined water-soluble inorganic and organic compounds having ligand properties. We used the model E-AIM IV to calculate the aerosol liquid water (ALW) content and pH, and we used the model Visual MinteQ to determine the speciation picture of the most important elements under conditions of both deliquescent aerosol (ALW and pH calculated using E-AIM IV, ambient temperature) and simulated fog. We found that the dissolution of Al, Cu, and Fe metal ions, predicted to be largely coordinated with organic compounds under fog conditions, was either immediate or considerably faster in samples collected on days with observed fog events compared with those collected on days having drier conditions. For readily soluble elements, such as As, Cd, Cr, Sr, and Zn, such an effect was not observed. Our study highlights the importance of coordination chemistry in atmospheric aerosol and fog in determining the bioavailability of particle-bound metals.

Toward a better understanding of ferric-oxalate complex photolysis: The role of the aqueous/air interface of droplet

In this work, the photo reactivity of ferric oxalate (Fe(III)-Ox) complex in atmospheric particles was investigated. Raman spectroscopy was used to explore the mechanism and kinetics of Fe(III)-Ox photolysis occurring at the aqueous/gas interface, inside the droplet and in bulk solution. Ferrous carbonate (FeCO₃) was detected indicating that carbonate ion (CO₃^2-) formed inside the droplets would compete with oxalate ligands for iron complexation. A higher concentration of photoproduct Fe(II)-Ox was observed at the surface and inside of the droplets than in bulk solution. In particular, Fe(III)-Ox on the droplet surface was quickly reduced with light and Fe(II)-Ox concentration gradually decreased with irradiation time. The evolution of Fe(II)-Ox concentration was similar inside the droplet and in bulk solution with a trend of first increasing and then gradually decreasing during irradiation time. Although FeCO₃ would hinder Fenton intermediate reaction, the photolysis rate of Fe(III)-Ox in droplets was almost two orders of magnitude times faster than that observed during bulk experiment. In general, the photolysis mechanism and kinetics of Fe(III)-Ox in aqueous/air interface, inside of droplet and bulk solution were distinct, and the production of oxide species from the atmospheric Fe(III)-Ox droplets was underestimated.

Discrepant oxidation behavior of ferric ion and hydroxyl radical on syringic acid and vanillic acid in atmospheric Fenton-like system

Syringic acid (SA) and vanillic acid (VA) from biomass combustion are not only the potential sources of atmospheric brown carbon (BrC) but also the traceable markers of biomass burning in smoke particles. In this work, the Fenton-like oxidation in a mixed system containing SA and VA was studied under some typical conditions in atmospheric aqueous. The influence of scavenger, Fe³⁺ concentration, H₂O₂ concentration, SA concentration, pH and oxygen was discussed. Our results revealed that despite SA and VA have similar structures, Fe³⁺ and HO sever as their main oxidation sources, respectively. The addition of SA could heighten the HO yield obviously compared with conventional Fenton-like oxidation in atmospheric water, and this performance was attributed to the strong reducibility to Fe³⁺. In addition, SA accelerated the oxidation of VA and caused a 4.7-fold elevation in the initial rate. These results demonstrate that the process may change the amount of SA and VA and then disturb their mass ratio, which is important for aerosol source characterization work.

Organic Coating Reduces Hygroscopic Growth of Phase-Separated Aerosol Particles

A large fraction of secondary aerosol particles are liquid-liquid phase-separated with an organic shell and an inorganic core. This has the potential to regulate the hygroscopicity of such particles, with significant implications for their optical properties, reactivity, and lifetime. However, it is unclear how this phase separation affects the hygroscopic growth of the particles. Here, we showed a large variation in hygroscopic growth (e.g., 1.14-1.32 under a relative humidity (RH) of 90%) of particles from the forest and urban atmosphere, which had different average core-shell ratios. For this reason, a controlled laboratory experiment further quantifies the impact of the organic shell on particle growth with different RH values. Laboratory experiments demonstrated that (NH₄)₂SO₄ particles with thicker secondary organic shells have a lower growth factor at an RH below 94%. Organic shells started to deliquesce first (RH > 50%) and the phase changes of sulfate cores from solid to liquid took place at an RH higher than 80% as deliquescence relative humidity of pure (NH₄)₂SO₄. Our study provides the first direct evidence on an individual particle basis that hygroscopic growth behavior of phase-separated particles is dependent on the thickness of organic shells, highlighting the importance of organic coating in water uptake and possible heterogeneous reactions of the phase-separated particles.

Variations in concentration and solubility of iron in atmospheric fine particles during the COVID-19 pandemic: An example from China

Iron (Fe) in the atmosphere can affect atmospheric chemical processes and human health. When deposited into oceans, it can further influence phytoplankton growth. These roles of Fe fundamentally depend on its concentration and solubility. However, the sources of aerosol Fe and controlling factors of Fe solubility in megacities remain poorly understood. The outbreak of the COVID-19 pandemic causes large changes in human activities, which provides a unique opportunity to answer these key issues. Field observations were conducted before, during, and after the COVID-19 lockdown in Hangzhou, China. Our results show that in the COVID-19 lockdown stage, the concentrations of total Fe (FeT, 75.0 ng m-3) and soluble Fe (FeS, 5.1 ng m-3) in PM2.5 decreased by 78% and 62%, respectively, compared with those (FeT 344.7 ng m-3, FeS 13.5 ng m-3) in the pre-lockdown stage. The sharp reduction (81%) in on-road vehicles was most responsible for the aerosol Fe decrease. Surprisingly, the Fe solubility increased by a factor of 1.9, from 4.2% in the pre-lockdown stage to 7.8% in the COVID-19 lockdown stage. We found that the atmospheric oxidizing capacity was enhanced after lockdown restrictions were implemented, which promoted the formation of more acidic species and further enhanced the dissolution of aerosol Fe.

Deposition of Aerosols onto Upper Ocean and Their Impacts on Marine Biota

Atmospheric aerosol deposition (wet and dry) is an important source of macro and micronutrients (N, P, C, Si, and Fe) to the oceans. Most of the mass flux of air particles is made of fine mineral particles emitted from arid or semi-arid areas (e.g., deserts) and transported over long distances until deposition to the oceans. However, this atmospheric deposition is affected by anthropogenic activities, which heavily impacts the content and composition of aerosol constituents, contributing to the presence of potentially toxic elements (e.g., Cu). Under this scenario, the deposition of natural and anthropogenic aerosols will impact the biogeochemical cycles of nutrients and toxic elements in the ocean, also affecting (positively or negatively) primary productivity and, ultimately, the marine biota. Given the importance of atmospheric aerosol deposition to the oceans, this paper reviews the existing knowledge on the impacts of aerosol deposition on the biogeochemistry of the upper ocean, and the different responses of marine biota to natural and anthropogenic aerosol input.

Variations in physicochemical properties of airborne particles during a heavy haze-to-dust episode in Beijing

The variations in physicochemical properties of airborne particles collected during a typical transition from haze to dust were investigated using single particle analysis with transmission and scanning electron microscopes combined with online measurement of chemical compositions of airborne particles in Beijing in February 2013. The transition was divided into three phases based on the weather condition. During haze pollution (Phase 1), gaseous and particle pollutants enhanced gradually. Results from single particle analysis showed that more coatings and more anthropogenic elements (e.g., S) appeared on the surface of fine and coarse particles, which was probably caused by efficient aqueous-phase reactions under high humidity (70%) condition. Phase 2 was dust intrusion episode. PM₁₀ reached over 1000 μg m^-3. Larger fractions of mineral particles and bare-like soot particles were observed in fine particles, while the fraction of secondary particles with coatings decreased. The proportion of black carbon in submicron particles also increased. Photochemical oxidation in gas phase likely dominated in secondary formation under high O₃ concentration. After the dust episode (Phase 3), secondary formation enhanced obviously. Soot aged quickly and had a larger mode of 0.45 μm than the other phases. The size modes of airborne fine particles during Phases 1 and 3 were 0.35 μm, which were a bit larger than that during Phase 2 (0.24 μm). These results indicate that dust plumes accompanied with strong wind brought mineral particles in both fine and coarse modes and freshly emitted particles with smaller sizes, and swept away pre-presence air pollutants. This study could provide detailed information on the physicochemical properties of airborne particles during typical severe pollution processes in a short time. Such short-term change should be taken into account in order to more accurately assess the environmental, climatic and health-related effects of airborne particles.

Fine particles from village air in northern China in winter: Large contribution of primary organic aerosols from residential solid fuel burning

Rural residential emissions contribute significantly to regional air pollution in China, but our understanding on how residential solid fuel burning influences the village outdoor air quality is limited. In this study, we compared the fine particulate matter (PM_2.5) composition and individual particle characteristics from 11 to 18 January 2017 at a village and an urban site in northern China. At the village site, each day was divided into four periods: cooking (07:30-10:00; 16:00-17:00), daytime (10:00-16:00), heating (17:00-24:00), and midnight (00:00-07:30) periods. The highest PM_2.5 concentration occurred during the cooking period (236 ± 88 μg m^-3), which was characterized by high concentrations of K⁺ and abundant primary OM-K particles (i.e., organic matter mixed with K-salts) emitted from residential biomass burning. The second highest PM_2.5 concentration was found during the heating period (161 ± 97 μg m^-3), and the PM_2.5 contained abundant spherical primary OM particles (i.e., tarballs) emitted from residential coal burning. The primary emissions from residential solid fuel burning resulted in 75% of the village OM by mass consisting of primary OM and 67% of the village aerosol particles by number internally mixing with primary OM particles. The village PM_2.5 composition was different from that of the urban PM_2.5, with the former containing more OM (47% vs 32%) and less secondary inorganic ions (30% vs 46%). Individual primary OM-K and tarballs were abundant in the village air. These results suggest a large contribution of village residential emissions in the winter to village air pollution. Our study highlights that the residential health in villages of northern China should be paid more attention because of high PM_2.5 concentrations and abundant toxic particles during the cooking and heating periods per day in winter.

The interaction laws of atmospheric heavy metal ions and water-soluble organic compounds in PM2.5 based on the excitation-emission matrix fluorescence spectroscopy

The excitation-emission matrix (EEM) fluorescence spectroscopy was used to characterize the fluorescence properties of water-soluble organic compounds (WSOCs) in PM_2.5 coupled with parallel factor analysis (PARAFAC). Three main components of WSOCs were extracted from PM_2.5, i.e., humic-like (fulvic acid-like and humic acid-like) substances (HULIS), and soluble microbial by-product-like or aromatic protein-like, respectively. A fluorescence quenching experiment was designed to systematically analyze the interaction laws of atmospheric heavy metal ions and WSOCs in PM_2.5. Our study revealed HULIS, especially the humic acid-like substances, might be principal substances binding with metal ions and the strength of interactions was related to the types and concentrations of metal ions. Furthermore, EEM was a powerful tool to understand the interaction laws of atmospheric heavy metal ions and WSOCs in PM_2.5. This work implied that the interactions of atmospheric heavy metal ions and WSOCs might directly or indirectly play a significant role in atmospheric environment and public health.