Elucidating the co-transport of bisphenol A with polyethylene terephthalate (PET) nanoplastics: A theoretical study of the adsorption mechanism

Adsorption and desorption of parachlormetaxylenol by aged microplastics and molecular mechanism

The addition of active ingredients such as antibacterial agent and non-active ingredients such as plastic microspheres (MPs) in personal care products (PCPs) are the common pollutants in the aquatic environment, and their coexistence poses potential threat to the aquatic ecosystem. As a substitute for the traditional antibacterial ingredients triclosan and triclocarban, the usage of parachlormetaxylenol (PCMX) is on the rise and is widely used in PCPs. In this study, the adsorption and desorption behaviors of PCMX were investigated with two typical MPs, polyvinyl chloride (PVC) and polyethylene (PE), and the effects of different aging modes and molecular mechanisms were explored through batch experiments and density functional theory calculation. Both laboratory aging and field aging resulted in surface wrinkles of MPs, along with an increased proportion of oxygen-containing functional groups (CO, -OH). At the same aging time, the degree of laboratory aging was stronger than that of field aging, and the aging degree of PVC was greater that of PE. The aging process enhanced the adsorption capacity of MPs for PCMX. The equilibrium adsorption capacity of PVC increased from 3.713 mg/g (virgin) to 3.823 mg/g (field aging) and 3.969 mg/g (laboratory aging), while that of PE increased from 3.509 mg/g to 3.879 mg/g and 4.109 mg/g, respectively. Meanwhile, aging also resulted in an increase in the desorption capacity of PCMX from PVC and PE. Oxygen-containing functional groups in aged MPs could serve as adsorption sites for PCMX and improved the electrostatic adsorption capacity. Oxygen-containing groups generated on the surface of aged MPs formed hydrogen bonding with the phenolic hydroxyl groups of PCMX, which became the main driving force for adsorption. Our results reveal the potential impact and mechanism of aging on the adsorption of PCMX by MPs, which provides new insights for the interaction mechanism between environmental MPs and associated contaminants.

Fate and transport of fragmented and spherical microplastics in saturated gravel and quartz sand

Microplastics in urban runoff undergo rapid fragmentation and accumulate in the soil, potentially endangering shallow groundwater. To improve the understanding of microplastic transport in groundwater, column experiments were performed to compare the transport behavior of fragmented microplastics (FMPs ∼1-µm diameter) and spherical microplastics (SMPs ∼1-, 10-, and 20-µm diameter) in natural gravel (medium and fine) and quartz sand (coarse and medium). Polystyrene microspheres were physically abraded with glass beads to mimic the rapid fragmentation process. The experiments were conducted at a constant flow rate of 1.50 m day-1 by injecting two pore volumes of SMPs and FMPs. Key findings indicate that SMPs showed higher breakthrough, compared to FMPs in natural gravel, possibly due to size exclusion of the larger SMPs. Interestingly, FMPs exhibited higher breakthrough in quartz sand, likely due to tumbling and their tendency to align with flow paths, while both sizes (larger and smaller relative to FMPs) of SMPs exhibited higher removal in quartz sand. Therefore, an effect due to shape and size was observed.

Algae polysaccharide-induced transport transformation of nanoplastics in seawater-saturated porous media

This study examined the distinct effects of algae polysaccharides (AP), namely sodium alginate (SA), fucoidan (FU), and laminarin (LA), on the aggregation of nanoplastics (NP) in seawater, as well as their subsequent transport in seawater-saturated sea sand. The pristine 50 nm NP tended to form large aggregates, with an average size of approximately 934.5 ± 11 nm. Recovery of NP from the effluent (Meff) was low, at only 18.2 %, and a ripening effect was observed in the breakthrough curve (BTC). Upon the addition of SA, which contains carboxyl groups, the zeta (ζ)-potential of the NP increased by 2.8 mV. This modest enhancement of electrostatic interaction with NP colloids led to a reduction in the aggregation size of NP to 598.0 ± 27 nm and effectively mitigated the ripening effect observed in the BTC. Furthermore, SA's adherence to the sand surface and the resulting increase in electrostatic repulsion, caused a rise in Meff to 27.5 %. In contrast, the introduction of FU, which contains sulfate ester groups, resulted in a surge in ζ-potential of the NP to -27.7 ± 0.76 mV. The intensified electrostatic repulsion between NP and between NP and sand greatly increased Meff to 45.6 %. Unlike the effects of SA and FU, the addition of LA, a neutral compound, caused a near disappearance of ζ-potential of NP (-3.25 ± 0.68 mV). This change enhanced the steric hindrance effect, resulting in complete stabilization of particles and a blocking effect in the BTC of NP. Quantum chemical simulations supported the significant changes in the electrostatic potential of NP colloids induced by SA, FU and LA. In summary, the presence of AP can induce variability in the mobility of NP in seawater-saturated porous media, depending on the nature of the weak, strong, or non-electrostatic interactions between colloids, which are influenced by the structure and functionalization of the polysaccharides themselves. These findings provide valuable insights into the complex and variable behavior of NP transport in the marine environment.

Cotransport of nanoplastics and plastic additive bisphenol AF (BPAF) in unsaturated hyporheic zone: Coupling effects of surface functionalization and protein corona

The ecological risk of combined pollution from microplastics (MPs) and associated contaminants usually depends on their interactions and environmental behavior, which was also disturbed by varying surface modifications of MPs. In this study, the significance of surface functionalization and protein-corona on the cotransport of nanoplastics (NPs; 100 nm) and the related additive bisphenol AF (BPAF) was examined in simulated unsaturated hyporheic zone (quartz sand; 250-425 μm). The electronegative bovine serum albumin (BSA) and electropositive trypsin were chosen as representative proteins, while pristine (PNPs), amino-modified (ANPs), and carboxyl-modified NPs (CNPs) were representative NPs with different charges. The presence of BPAF inhibited the mobility of PNPs/CNPs, but enhanced the release of ANPs in hyporheic zone, which was mainly related to their hydrophobicity changes and electrostatic interactions. Meanwhile, the NPs with high mobility and strong affinity to BPAF became effective carriers, promoting the cotransport of BPAF by 16.4 %-26.4 %. The formation of protein-coronas altered the mobility of NPs alone and their cotransport with BPAF, exhibiting a coupling effect with functional groups. BSA-corona promoted the transport of PNPs/CNPs, but this promoting effect was weakened by the presence of BPAF via increasing particle aggregation and hydrophobicity. Inversely, trypsin-corona aggravated the deposition of PNPs/CNPs, but competition deposition sites and increased energy barrier caused by coexisting BPAF reversed this effect, facilitating the cotransport of trypsin-PNPs/CNPs in hyporheic zone. However, BPAF and protein-coronas synergistically promoted the mobility of ANPs, owing to competition deposition sites and decreased electrostatic attraction. Although all of the NPs with two protein-coronas reduced dissolved BPAF in the effluents via providing deposition sites, the cotransport of total BPAF was improved by the NPs with high mobility (BSA-PNPs/CNPs) or high affinity to BPAF (BSA/trypsin-ANPs). However, the trypsin-PNPs/CNPs inhibited the transport of BPAF due to their weak mobility and adsorption with BPAF. The results provide new insights into the role of varying surface modifications on NPs in the vertical cotransport of NPs and associated contaminants in unsaturated hyporheic zone.

The possible impacts of nano and microplastics on human health: lessons from experimental models across multiple organs

The widespread production and use of plastics have resulted in accumulation of plastic debris in the environment, gradually breaking down into smaller particles over time. Nano-plastics (NPs) and microplastics (MPs), defined as particles smaller than 100 nanometers and 5 millimeters, respectively, raise concerns due to their ability to enter the human body through various pathways including ingestion, inhalation, and skin contact. Various investigators demonstrated that these particles may produce physical and chemical damage to human cells, tissues, and organs, disrupting cellular processes, triggering inflammation and oxidative stress, and impacting hormone and neurotransmitter balance. In addition, micro- and nano-plastics (MNPLs) may carry toxic chemicals and pathogens, exacerbating adverse effects on human health. The magnitude and nature of these effects are not yet fully understood, requiring further research for a comprehensive risk assessment. Nevertheless, evidence available suggests that accumulation of these particles in the environment and potential human uptake are causes for concern. Urgent measures to reduce plastic pollution and limit human exposure to MNPLs are necessary to safeguard human health and the environment. In this review, current knowledge regarding the influence of MNPLs on human health is summarized, including toxicity mechanisms, exposure pathways, and health outcomes across multiple organs. The critical need for additional research is also emphasized to comprehensively assess potential risks posed by degradation of MNPLs on human health and inform strategies for addressing this emerging environmental health challenge. Finally, new research directions are proposed including evaluation of gene regulation associated with MNPLs exposure.

An Atomic-Level Perspective on the interactions between Organic Pollutants and PET particles: A Comprehensive Computational Investigation

Microplastics (MPs) have recently attracted a lot of attention worldwide due to their abundance and potentially harmful effects on the environment and on human health. One of the factors of concern is their ability to adsorb and disperse other harmful organic pollutants in the environment. To properly assess the adsorption capacity of MP for organic pollutants in different environments, it is pivotal to understand the mechanisms of their interactions in detail at the atomic level. In this work, we studied interactions between polyethylene terephthalate (PET) MP and small organic pollutants containing different functional groups within the framework of density functional theory (DFT). Our computational outcomes show that organic pollutants mainly bind to the surface of a PET model via weak non-bonding interactions, mostly hydrogen bonds. The binding strength between pollutant molecules and PET particles strongly depends on the adsorption site while we have found that the particle size is of lesser importance. Specifically, carboxylic sites are able to form strong hydrogen bonds with pollutants containing hydrogen bond donor or acceptor groups. On the other hand, it is found that in such kind of systems π-π interactions play a minor role in adsorption on PET particles.

Interaction Between Endocrine Disruptors and Polyethylene Nanoplastic by Molecular Dynamics Simulations

Nanoplastics (NPs) can come into contact with humans through different means such as ingesting contaminated food or exposure to contaminated air. Recent research indicates that these NPs can act as vectors for other contaminants. Further research is still needed to determine the effects of these interactions and whether they are significant under environmental conditions. Bisphenol A (BPA) and benzophenone (BZP) are possible contaminants that could be cotransported with NPs. Even in low concentrations, BPA and BZP can act as endocrine disruptors and have been linked to several diseases. In this study, we used molecular dynamics simulations to obtain the potential of mean force (PMF) profile between a polyethylene NP and a BPA/BZP molecule. The PMF shows a minimum of -8.0 kJ mol-1 for the BPA, whereas it is -23.5 kJ mol-1 for the BZP, meaning BZP has a much greater attractive potential to polyethylene than BPA. We can infer that the higher quantity of BPA's hydrogen bonds with the water contributes to the difference between BZP and BPA. The results indicate the need to address the possibility of NPs playing a role in the cotransport and bioaccumulation of contaminants in aquatic ecosystems.

Micro/nanoplastics: Critical review of their impacts on plants, interactions with other contaminants (antibiotics, heavy metals, and polycyclic aromatic hydrocarbons), and management strategies

Microplastic/nanoplastics (MPs/NPs) contamination is not only emerging threat to the agricultural system but also constitute global hazard to the environment worldwide. Recent review articles have addressed the environmental distribution of MPs/NPs and their single-exposure phytotoxicity in various plant species. However, the mechanisms of MPs/NPs-induced phytotoxicity in conjunction with that of other contaminants remain unknown, and there is a need for strategies to ameliorate such phytotoxicity. To address this, we comprehensively review the sources of MPs/NPs, their uptake by and effects on various plant species, and their phytotoxicity in conjunction with antibiotics, heavy metals, polycyclic aromatic hydrocarbons (PAHs), and other toxicants. We examine mechanisms to ameliorate MP/NP-induced phytotoxicity, including the use of phytohormones, biochar, and other plant-growth regulators. We discuss the effects of MPs/NPs -induced phytotoxicity in terms of its ability to inhibit plant growth and photosynthesis, disrupt nutrient metabolism, inhibit seed germination, promote oxidative stress, alter the antioxidant defense system, and induce genotoxicity. This review summarizes the novel strategies for mitigating MPs/NPs phytotoxicity, presents recent advances, and highlights research gaps, providing a foundation for future studies aimed at overcoming the emerging problem of MPs/NPs phytotoxicity in edible crops.

Cation-π mechanism promotes the adsorption of humic acid on polystyrene nanoplastics to differently affect their aggregation: Evidence from experimental characterization and DFT calculation

Multiple water-chemistry factors determine nanoplastics aggregation and thus change their bioavailability and ecological risks in natural aquatic environments. However, the dominant factors and their interactive mechanisms remain elusive. In this study, polystyrene nanoplastics (PSNPs) showed greater colloidal stability in Li Lake water compared to ultrapure water. The RDA and PARAFAC results suggested that dissolved organic carbon, humic acid (HA) in particular, Ca2+, and pH are critical factors influencing PSNPs aggregation. Batch experiments showed that the critical coagulation concentration (CCC) of PSNPs was increased with pH increase; HA increased the CCC of PSNPs in NaCl by 2.6-fold but decreased that in CaCl2 by 1.8-fold. Moreover, cations increased the adsorption of HA on PSNPs. The DFT results suggested that HA-cations complexes (EAE = -1.10 eV and -0.51 eV for HA-Ca2+ and HA-Na+, respectively) but not HA alone (EAE = -0.33 eV) are the main scenarios for their adsorption on PSNPs, and a cation-π mechanism between PSNPs and HA-cations complexes dominates PSNPs aggregation in this scenario. The findings are significant for better understanding the environmental process and fate of nanoplastics in aquatic environments. ENVIRONMENTAL IMPLICATION: Nanoplastics are kinds of emerging contaminants. Nanoplastic aggregation determines their bioavailability and toxic risks to ecological health. Herein, the hydrodynamic sizes of PSNPs in local Li Lake water was tested and a redundancy analysis was performed to examine the key water-chemistry factors driving PSNPs aggregation. Moreover, the mechanisms in PSNPs aggregation driven by multiple dominant water-chemistry factors including cations, pH, and DOC were firstly unveiled by combining experimental characterization and theoretical computations. This work improves our understanding of the environmental fate of nanoplastics and provides a theoretical basis for the risk assessment and control of nanoplastics in real aquatic environments.

Gas-Phase Interaction of CO, CO2, H2S, NH3, NO, NO2, and SO2 with Zn12O12 and Zn24 Atomic Clusters

Atmospheric pollutants pose a high risk to human health, and therefore it is necessary to capture and preferably remove them from ambient air. In this work, we investigate the intermolecular interaction between the pollutants such as CO, CO₂, H₂S, NH₃, NO, NO₂, and SO₂ gases with the Zn₂₄ and Zn₁₂O₁₂ atomic clusters, using the density functional theory (DFT) at the meta-hybrid functional TPSSh and LANl2Dz basis set. The adsorption energy of these gas molecules on the outer surfaces of both types of clusters has been calculated and found to have a negative value, indicating a strong molecular-cluster interaction. The largest adsorption energy has been observed between SO₂ and the Zn₂₄ cluster. In general, the Zn₂₄ cluster appears to be more effective for adsorbing SO₂, NO₂, and NO than Zn₁₂O₁₂, whereas the latter is preferable for the adsorption of CO, CO₂, H₂S, and NH₃. Frontier molecular orbital (FMO) analysis showed that Zn₂₄ exhibits higher stability upon adsorption of NH₃, NO, NO₂, and SO₂, with the adsorption energy falling within the chemisorption range. The Zn₁₂O₁₂ cluster shows a characteristic decrease in band gap upon adsorption of CO, H₂S, NO, and NO₂, suggesting an increase in electrical conductivity. Natural bond orbital (NBO) analysis also suggests the presence of strong intermolecular interactions between atomic clusters and the gases. This interaction was recognized to be strong and noncovalent, as determined by noncovalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. Overall, our results suggest that both Zn₂₄ and Zn₁₂O₁₂ clusters are good candidate species for promoting adsorption and, thus, can be employed in different materials and/or systems for enhancing interaction with CO, H₂S, NO, or NO₂.

The role of algal EPS in reducing the combined toxicity of BPA and polystyrene nanoparticles to the freshwater algae Scenedesmus obliquus

Both Bisphenol A (BPA) and polystyrene nanoplastics (PSNPs) are routinely found in several consumer products such as packaging materials, flame retardants, and cosmetics. The environment is seriously endangered by nano- and microplastics. In addition to harming aquatic life, nanoplastics (NPs) also bind to other pollutants, facilitating their dispersion in the environment and possibly promoting toxicity induced by these pollutants. The toxic effects of polystyrene nanoplastics (PS-NPs) and BPA were examined in this study, as well as the combined toxic impacts of these substances on the freshwater microalgae Scenedesmus obliquus. In addition, the exopolymeric substances (EPS) secreted by algae will interact with the pollutants modifying their physicochemical behaviour and fate. This work aimed to investigate how algal EPS alters the combined effects of BPA and PSNPs on the microalgae Scenedesmus obliquus. The algae were exposed to binary mixtures of BPA (2.5, 5, and 10 mg/L) and PSNPs (1 mg/L of plain, aminated, and carboxylated PSNPs) with EPS added to the natural freshwater medium. Cell viability, hydroxyl and superoxide radical generation, cell membrane permeability, antioxidant enzyme activity (catalase and superoxide dismutase), and photosynthetic pigment content were among the parameters studied to determine the toxicity. It was observed that for all the binary mixtures, the carboxylated PSNPs were most toxic when compared to the toxicity induced by the other PSNP particles investigated. The maximum damage was observed for the mixture of 10 mg/L of BPA with carboxylated PSNPs with a cell viability of 49%. When compared to the pristine mixtures, the EPS-containing mixtures induced significantly reduced toxic effects. A considerable decrease in reactive oxygen species levels, activity of antioxidant enzymes (SOD and CAT), and cell membrane damage was noted in the EPS-containing mixtures. Reduced concentrations of the reactive oxygen species led to improved photosynthetic pigment content in the cells.

Insights into sorption and molecular transport of atrazine, testosterone, and progesterone onto polyamide microplastics in different aquatic matrices

Microplastics can act as vectors of a wide class of contaminants in aquatic environments. The sorption behavior of two hormones known to cause adverse effects in biota even in low concentrations (testosterone-TTR and progesterone-PGT), and a pesticide with a high environmental persistence known as endocrine disruptor chemical (atrazine-ATZ) onto polyamide (PA) microplastics is investigated under different aquatic matrices using kinetic and isotherm experiments. The sorption equilibrium is achieved in 48 h, and the experimental results are better fitted by pseudo-2nd-order model. Langmuir isotherm better describes the sorption of the contaminants onto PA microplastics. PGT presents the highest sorption efficiency at around 90%, followed by TTR at 70% and ATZ at approximately 20%. Moreover, ATZ is the contaminant with the highest desorption efficiency (∼65%), indicating its preference for staying solubilized in water. Combining classical molecular dynamics and density functional theory calculations, the sorption energies were calculated as 12-15 kcal mol^-1, 13-16 kcal mol^-1, and 19-22 kcal mol^-1 for PGT, TTR, and ATZ, respectively, showing that PGT needs less energy to be transferred from the solvent network to the PA surface, in agreement with experimental results. The sorption mechanism is driven by hydrogen bonds onto PA outer surface, while the electrostatic interactions dominate the PA inner surface sorption. Moreover, the sorption efficiency is statistically different between the investigated matrices, indicating that physicochemical characteristics of water systems could influence the interactions between PA-contaminant. In seawater, the phenomena of salting-out/in and competitive sorption with saline ions are observed for three contaminants. The PA-contaminant complexes are more polar and soluble than the dissociated ones, which increases the contaminant's co-transport by PA in water.

Mechanistic insights into the adsorption of endocrine disruptors onto polystyrene microplastics in water

Microplastics and endocrine disruptors (EDs) are contaminants of emerging concerns and ubiquitously present in aquatic ecosystems, establishing interactions that still are the subject of investigation due to their implications in the cotransport of pollutants. Then, we conducted mechanistic studies based on state-of-art computational chemistry methods to quantitatively understand the interaction mechanisms whereby polystyrene micro or nanoplastics (PS-MPs) interact with representative classes of EDs in water (Ethynylestradiol, Estradiol, and Bisphenol A). The results showed that PS-MPs increase their charge distribution when forming microparticles in water, giving a permanent dipole that explains their increasing solubility in aqueous conditions. In agreement with experimental assessments, the PS-MPs favorably adsorb EDs with adsorption energies larger than 15 kcal/mol, even with comparable stability to nanostructured materials for adsorption, removal, and/or analysis of pollutants. The adsorption occurs via physisorption without covalent binding, bond breaking, or structural preparation energies, where the molecular structure of EDs can favor inner or outer surface adsorption depending on the molecular structure of the adsorbates. A balanced contribution of dispersion and electrostatic stabilizing effects determines the interaction mechanisms, accounting for a whole contribution of 88-90%. The electrostatic contribution emerges from the favorable alignment of the PS-MPs and EDs dipoles upon interaction due to the mild charge transfer between them in solution. In contrast, the dispersion contribution emerges from electron-electron interactions due to the permanent dipoles in adsorbates and adsorbents. Furthermore, thermochemical analyses clarify the role of temperature and pressure effects on the relative adsorption stability among EDs in aquatic environments. Therefore, modeling the adsorption process contributes to new knowledge on the sorption properties of PS-MPs, providing a mechanistic basis to understand the cotransport of pollutants in water environments and their impacts on environmental pollution.

Enhanced Adsorption of Bromoform onto Microplastic Polyethylene Terephthalate Exposed to Ozonation and Chlorination

This paper selected microplastic polyethylene terephthalate (PET), commonly found in water/wastewater plant effluent, to investigate the changes of PET oxidized under ozonation (designated as ozonized PET), followed by sodium hypochlorite oxidation (designated as ozonized-chlorinated PET) and studied their influence on the adsorption of the disinfection by-product bromoform (TBM). Fragmentation and cracks appeared on the oxidized PET surface. As the oxidation degree increased, the contact angle decreased from 137° to 128.90° and 128.50°, suggesting hydrophilicity was enhanced. FTIR and XPS analyses suggested that carbonyl groups increased on the surface of ozonized PET and ozonized-chlorinated PET, while the formation of intermolecular halogen bonds was possible when PET experienced dual oxidation. These physiochemical changes enhanced the adsorption of TBM. The adsorption capacity of TBM followed the order of ozonized-chlorinated PET (2.64 × 10−6 μg/μg) > ozonized PET (2.58 × 10−6 μg/μg) > pristine PET (2.43 × 10−6 μg/μg). The impact of raw water characteristics on the adsorption of TBM onto PETs, such as the pH, and the coexistence of inorganic ions and macromolecules (humic acid, surfactant, and bovine serum albumin) were studied. A different predominant adsorption mechanism between TBM and pristine PET or oxidized PETs was proposed.

Bisphenol S degradation in soil and the dynamics of microbial community associated with degradation

Bisphenol S (BPS) has been widely applied as a replacement for BPA in industrial application, leading to the frequent detection in the environment. However, its impact on soil microbial communities has not been well reported. Here, effects of BPS exposure on soil microbial communities in the presence of polystyrene (PS) microplastics were revealed. Rapid degradation of BPS occurred with a degradation rate of up to 98.9 ± 0.001 % at 32 d. The presence of BPS reduced the diversity of soil microbial communities, and changed community structures. After BPS treatment, Proteobacteria, and its members Methylobacillus, Rhodobacteraceae and Mesorhizobium became dominant, and were considered as potential biomarkers indicating BPS contamination. Co-occurrence network analysis revealed the increased relationships of certain groups of microbes after BPS treatment. The resultant low stability and resilience towards environment disturbance of microbial community networks implied the biotoxicity of BPS towards soil ecosystems. The degradation and biotoxicity of BPS (p > 0.05) in soil was not affected by the presence of PS. Our findings showed that exposure to BPS could reshape soil microbial communities and impair the robustness of microbial co-occurrence networks.

Antagonistic effect of polystyrene nanoplastics on cadmium toxicity to maize (Zea mays L.)

Nanoplastics (NPs) (<1 μm) have gradually attracted worldwide attention owing to their widespread occurrence, distribution, and ecosystem risks. Few studies have explored the interaction between NPs and heavy metals in crops. In this study, we investigated the influence of polystyrene nanoplastics (PSNPs; 10 mg/L and 100 mg/L) and cadmium (2 mg/L and 10 mg/L) on the physiological and biochemical indices of maize plants, grown in Hoagland solution with contaminants, for 14 days. The fresh weight and growth of the maize plants were significantly reduced after exposure to high concentrations of PSNPs and Cd (p < 0.05). Specifically, the fresh weight decreased by 30.3% and 32.5% in the PSNPs and Cd treatment, respectively. Root length and shoot length decreased by 11.7% and 20.0%, and by 16.3% and 27.8%, in the PSNPs and Cd treatment, respectively. However, there were no significant effects on the fresh weight and growth of maize plants as Cd levels increased from 2 to 10 mg/L in the presence of PSNPs. Polystyrene nanoplastics alleviated the phytotoxicity of Cd in maize. Scanning electron microscopy (SEM) showed that PSNPs and Cd could enter maize roots and were transported upwards to the leaves through the vascular bundle. The activities of peroxidase (POD) and catalase (CAT) in maize leaves increased significantly under high concentrations of PSNPs, whereas superoxide dismutase (SOD) activity decreased (p < 0.05). The differences in SOD activity may be related to the absence of microelements such as Zn, Fe, and Mn. This study provides a scientific basis for further exploration of the combined toxicological effects of heavy metals and NPs on the environment.

Aging of colloidal contaminants and pathogens in the soil environment: Implications for nanoplastic and COVID-19 risk mitigation

Colloidal contaminants and pathogens are widely distributed in soil, whose tiny sizes and distinct surface properties render unique environmental behaviours. Because of aging, colloids can undergo dramatic changes in their physicochemical properties once in the soil environment, thus leading to diverse or even unpredictable environmental behaviour and fate. Herein, we provide a state-of-art review of colloid aging mechanisms and characteristics and implications for risk mitigation. First, we review aging-induced formation of colloidal contaminants and aging-associated changes. We place a special focus on emerging nanoplastic (NP) contaminants and associated physical, chemical, and biological aging processes in soil environments. Second, we assess aging and survival features of colloidal pathogens, especially viruses. Viruses in soils may survive from several days to months, or even several years in groundwater, depending on their rates of inactivation and the reversibility of attachment. Furthermore, we identify implications for risk mitigation based on aging mechanisms. Hotspots of (photo)chemical aging of NPs, including plastic gauzes at construction sites and randomly discarded plastic waste in rural areas, are identified as area requiring greater research attention. For COVID-19, we suggest taking greater care in regions where viruses are persist for long periods, such as cold climate regions. Soil amendment with quicklime (CaO) may act as an effective means for pathogen disinfection. Future risk mitigation of colloidal contaminants and pathogens relies on a better understanding of aging mechanisms and more sophisticated models accurately depicting processes in real soil environments.

The potential toxicity of polystyrene nanoplastics to human trophoblasts in vitro

Nanoplastics (NPs), the emerging contaminants in recent years, widely distributed in the environment and are bioaccumulated and biomagnified in organisms through food chain. A growing number of studies have detected plastic particulates in human placenta and blood. However, few studies have focused on their effects during human pregnancy. Herein, human trophoblast HTR-8/Svneo cells were used to evaluate the effects and the possible mechanism of 100-nm polystyrene NPs on placental trophoblasts at the maternal-fetal interface. The results showed that NPs entered the trophoblastic cytoplasm, decreased cell viability, caused cell cycle arrest, reduced the cell migration and invasion abilities, increased level of intracellular reactive oxygen species and the production of proinflammatory cytokines (TNF-α and IFN-γ) in a dose-dependent manner. Furthermore, global transcriptome sequencing (RNA-Seq) was performed on HTR-8/Svneo cells with or without 100 μg/mL PS-NP exposure for 24 h. A total of 344 differentially expressed genes were detected. The gene functions for regulation of leukocyte differentiation, response to stimulus, cell cycle, apoptotic process, and cell adhesion were enriched. Thyroid hormone, Hippo, TGF-β and FoxO signaling pathways were activated. Collectively, our data provided evidences for the adverse consequences of NPs on the biological functions of trophoblasts, which provided new insights into the potential trophoblast toxicity of NPs in mammals.

Bisphenol A and microplastics weaken the antimicrobial ability of blood clams by disrupting humoral immune responses and suppressing hemocyte chemotactic activity

Robust antimicrobial capability is crucial for marine organisms survival in complex ocean environments. Although the detrimental impacts of emergent pollutants on cellular immune response of marine bivalve mollusks were increasingly documented, the effects of bisphenol A (BPA) and microplastics (MPs) on humoral immune response and hemocyte chemotactic activity remain unclear. Therefore, in this study, the toxicities of BPA and MPs, alone or in combination, to the antimicrobial ability, humoral immune response, and hemocyte chemotactic activity were investigated in the blood clam Tegillarca granosa. Our data demonstrated that exposure of blood clams to BPA, MPs, and BPA-MPs for 2 weeks lead to significant reductions in their survival rates upon pathogenic bacterial challenge, indicating evident impairment of antimicrobial ability. Compared to control, the plasma of pollutant-incubated blood clams exhibited significantly less antimicrobial activity against the growth of V. harveyi, suggesting significant reduction in humoral immune effectors including defensin, lysozyme (LZM), and lectin. Moreover, hemocytes migration across the polycarbonate membrane to the serum containing chamber was markedly arrested by 2-week exposure to BPA, MPs, and BPA-MPs, suggesting a hampered chemotactic activity. In addition, the intracellular contents of ROS and protein carbonyl in hemocytes were markedly induced whereas the expression levels of key genes from the MAPK and actin cytoskeleton regulation pathways were significantly suppressed upon exposure. In this study, it was also found that BPA-MP coexposure was significantly more toxic than single exposures. In summary, our findings revealed that exposure to the pollutants tested possibly impair the antimicrobial ability of blood clam through (1) reducing the inhibitory effect of plasma on bacterial growth, the contents of humoral immune effectors, and the chemotactic activity of hemocytes, (2) interrupting IL-17 activation of MAPK signal pathway, (3) inducing intracellular ROS, elevating protein carbonylation levels, and disrupting actin cytoskeleton regulation in hemocytes.

Pollution caused by nanoplastics: adverse effects and mechanisms of interaction via molecular simulation

The continuous increase in the production of synthetic plastics for decades and the inadequate disposal of plastic waste have resulted in a considerable increase of these materials in aquatic environments, which has developed into a major environmental concern. In addition to conventional parameters, the relevance of the environmental monitoring of microplastics (MPs) and nanoplastics (NPs) has been highlighted by the scientific community due to the potential adverse effects these materials pose to the ecosystem as well as to human health. The literature has registered an increasing interest in understanding the mechanisms, at the molecular level, of the interaction between NPs and other compounds using molecular simulation techniques. The present review aims to: (i) summarize the force fields conventionally used to describe NPs by molecular simulations; (ii) discuss the effects of NPs in the structural and dynamical properties of biological membranes; (iii) evaluate how NPs affect the folding of proteins; (iv) discuss the mechanisms by which NPs adsorb contaminants from the environment. NPs can affect the secondary structure of proteins and change the lateral organization and diffusion of lipid membranes. As a result, they may alter the lipid digestion in the gastrointestinal system representing a risk to the assimilation of the nutrients by humans. The adsorption of contaminants on MPs and NPs can potentiate their harmful effects on human health, due to a possible synergism. Therefore, understanding the mechanisms involved in these interactions is crucial to predict dangerous combinations and outline action strategies that reduce negative impacts on ecosystems and human health. Depending on the chemical properties of contaminants and NPs, electrostatic and/or van der Waals interactions can be more relevant in explaining the adsorption process. Finally, we conclude by highlighting gaps in the literature and the critical aspects for future investigations.

Nanoplastic stimulates metalloid leaching from historically contaminated soil via indirect displacement

It is generally believed that the ability of nanoplastics (NPs) to mobilize other contaminants is due to direct adsorption; however, this intuitive belief is questioned in this study when it comes to a historically contaminated soil where mining activities since 1958 have resulted in arsenic (As) and cadmium (Cd) enrichment. Negatively charged polystyrene (PS) NPs were used in this study, which should theoretically stimulate Cd (metal cation) instead of As (negatively charged oxyanion) leaching if direct adsorption accounted for co-transport. Surprisingly, PS NPs enhanced the leaching of As by up to over 5 times (p value < 0.05), but had almost no effect on Cd leaching (p value > 0.05). A novel indirect displacement model was therefore developed to describe the phenomenon of enhanced As leaching. It has been found that negatively charged NPs interacted with As via competition for soil binding sites. Underlying mechanistic insights were further explored via both theoretical calculations with the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) approach, and direct characterization using Scanning Electron Microscopy (SEM) and Computed X-ray Microtomography (μCT) showing binding sites and flow channels, respectively. The overall results provide new and valuable insights into NP-metal(loid) interactions in the natural soil environment, which can be integrated in future studies regarding the transport and risk assessment of NPs, and toxic metal(loid)s.

Recent Advancements in Cyclodextrin-Based Adsorbents for the Removal of Hazardous Pollutants from Waters

Water is an essential substance for the survival on Earth of all living organisms. However, population growth has disturbed the natural phenomenon of living, due to industrial growth to meet ever expanding demands, and, hence, an exponential increase in environmental pollution has been reported in the last few decades. Moreover, water pollution has drawn major attention for its adverse effects on human health and the ecosystem. Various techniques have been used to treat wastewater, including biofiltration, activated sludge, membrane filtration, active oxidation process and adsorption. Among the mentioned, the last method is becoming very popular. Moreover, among the sorbents, those based on cyclodextrin have gained worldwide attention due to their excellent properties. This review article overviewed recent contributions related to the synthesis of Cyclodextrin (CD)-based adsorbents to treat wastewater, and their applications, especially for the removal of heavy metals, dyes, and organic pollutants (pharmaceuticals and endocrine disruptor chemicals). Furthermore, new adsorption trends and trials related to CD-based materials are also discussed regarding their regenerative potential. Finally, this review could be an inspiration for new research and could also anticipate future directions and challenges associated with CD-based adsorbents.

Adsorption of environmental contaminants on micro- and nano-scale plastic polymers and the influence of weathering processes on their adsorptive attributes

Increases in plastic-related pollution and their weathering can be a serious threat to environmental sustainability and human health, especially during the present COVID-19 (SARS-CoV-2 coronavirus) pandemic. Planetary risks of plastic waste disposed from diverse sources are exacerbated by the weathering-driven alterations in their physical-chemical attributes and presence of hazardous pollutants mediated through adsorption. Besides, plastic polymers act as vectors of toxic chemical contaminants and pathogenic microbes through sorption onto the 'plastisphere' (i.e., plastic-microbe/biofilm-environment interface). In this review, the effects of weathering-driven alterations on the plastisphere are addressed in relation to the fate/cycling of environmental contaminants along with the sorption/desorption dynamics of micro-/nano-scale plastic (MPs/NPs) polymers for emerging contaminants (e.g., endocrine-disrupting chemicals (EDCs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), pharmaceuticals and personal care products (PPCPs), and certain heavy metals). The weathering processes, pathways, and mechanisms governing the adsorption of specific environmental pollutants on MPs/NPs surface are thus evaluated in relation to the physicochemical alterations based on several kinetic and isotherm studies. Consequently, the detailed evaluation on the role of the complex associations between weathering and physicochemical properties of plastics should help us gain a better knowledge with respect to the transport, behavior, fate, and toxicological chemistry of plastics along with the proper tactics for their sustainable remediation.

Nanoplastic State and Fate in Aquatic Environments: Multiscale Modeling

We now know that nanoplastics can harm aquatic organisms, but understanding ecological risk starts with understanding fate. We coupled population balance and fugacity models to predict the conditions under which nanoplastics remain as single particles, aggregate, or sediment and to predict their capacity to concentrate organic pollutants. We carried out simulations across a broad range of nanoplastic concentrations, particle sizes, and particle-particle interactions under a range of salinity and organic matter conditions. The model predicts that across plastic materials and environmental conditions, nanoplastics will either remain mostly dispersed or settle as aggregates with natural colloids. Nanoplastics of different size classes respond dissimilarly to concentration, ionic strength, and organic matter content, indicating that the sizes of nanoplastics to which organisms are exposed likely shift across ecological zones. We implemented a fugacity model of the Great Lakes to assess the organic pollution payload carried by nanoplastics, generating the expectation that nanoplastics would carry nine times more pollutants than microsized plastics and a threshold concentration of 10 μg/L at which they impact pollutant distribution. Our simulations across a broad range of factors inform future experimentation by highlighting the relative importance of size, concentration, material properties, and interactions in driving nanoplastic fate in aquatic environments.

Effect of Agricultural Organic Inputs on Nanoplastics Transport in Saturated Goethite-Coated Porous Media: Particle Size Selectivity and Role of Dissolved Organic Matter

The transport of nanoplastics (NPs) through porous media is influenced by dissolved organic matter (DOM) released from agricultural organic inputs. Here, cotransport of NPs with three types of DOM (biocharDOM (BCDOM), wheat strawDOM (WSDOM), and swine manureDOM (SMDOM)) was investigated in saturated goethite (GT)-coated sand columns. The results showed that codeposition of 50 nm NPs (50NPs) with DOM occurred due to the formation of a GT-DOM-50NPs complex, while DOM loaded on GT-coated sand and 400 nm NPs (400NPs) aided 400NPs transport due to electrostatic repulsion. According to the quantum chemical calculation, humic acid and cellulose played a significant role in 50NPs retardation. Owing to its high concentration, moderate humification index (HIX), and cellulose content, SMDOM exhibited the highest retardation of 50NPs transport and promoting effect on 400NPs transport. Owing to a high HIX, the effect of BCDOM on the mobility of 400NPs was higher than that of WSDOM. However, high cellulose content in WSDOM caused it to exhibit a 50NPs retardation ability that was similar to that of BCDOM. Our results highlight the particle size selectivity and significant influence of DOM type on the transport of NPs and elucidate their quantum and colloidal chemical-interface mechanisms in a typical agricultural environment.

Effects of selected functional groups on nanoplastics transport in saturated media under diethylhexyl phthalate co-contamination conditions

The production and degradation of plastic remains can result in nanoplastics (NPs) formation. However, insufficient information regarding the environmental behaviors of NPs impedes comprehensive assessment of their significant threats. In this study, the transport behavior of unmodified NPs (PSNPs), carboxyl-modified NPs (PSNPs-COOH), and amino-modified NPs (PSNPs-NH₂) was investigated using column experiments in the presence and absence of goethite (GT) and diethylhexyl phthalate (DEHP). Quantum chemical computation was performed to reveal the transport mechanisms. The results showed that GT decreased the transport of NPs and the presence of DEHP decreased it further. Van der Waals forces and small electrostatic interactions coexisted between the PSNPs and GT and caused deposition. Ligand exchange caused greater deposition of PSNPs-COOH on GT-coated sand than that of PSNPs. Although hydrogen bonding existed between the DEHP and NPs with functional groups, an increase in the positive charge and chemical heterogeneity of the collector was the main reason for DEHP promoting the deposition of NPs. Because of low absolute negative zeta potential values, PSNPs-NH₂ was sensitive to chemical heterogeneity, and thus fully deposited (over 96.9%) in GT and GT-DEHP-coated columns. Generally, the deposition of NPs due to chemical heterogeneity was more significant than that due to the formation of chemical bonds and van der Waals, electrostatic, and hydrogen interactions. Our results highlight that the surface charge and functional groups significantly influence the transport behaviors of NPs and elucidate the fate of NPs in the terrestrial environment.

Ecological implications beyond the ecotoxicity of plastic debris on marine phytoplankton assemblage structure and functioning

Plastic pollution is a global issue posing a threat to marine biota with ecological implications on ecosystem functioning. Micro and nanoplastic impact on phytoplankton autotrophic species (e.g., cell growth inhibition, decrease in chlorophyll a and photosynthetic efficiency and hetero-aggregates formation) have been largely documented. However, the heterogeneity of data makes rather difficult a comparison based on size (i.e. micro vs nano). In addition, knowledge gaps on the ecological impact on phytoplankton assemblage structure and functioning are evident. A new virtual meta-analysis on cause-effect relationships of micro and nanoplastics on phytoplankton species revealed the significant effect posed by polymer type on reducing cell density for tested PVC, PS and PE plastics. Linked with autotrophic phytoplankton role in atmospheric CO₂ fixation, a potential impact of plastics on marine carbon pump is discussed. The understanding of the effects of microplastics and nanoplastics on the phytoplankton functioning is fundamental to raise awareness on the overall impact on the first level of marine food web. Interactions between micro and nanoplastics and phytoplankton assemblages have been quite documented by in vitro examinations; but, further studies considering natural plankton assemblages and/or large mesocosm experiments should be performed to evaluate and try predicting ecological impacts on primary producers.

Short-term exposure to polymethylmethacrylate nanoplastics alters muscle antioxidant response, development and growth in Sparus aurata

Polymethylmethacrylate (PMMA) plastic fragments have been found abundant in the environment, but the knowledge regarding its effects on the physiology of aquatic animals is still poorly studied. Here the short-term (96 h) effects of waterborne exposure to PMMA nanoplastics (PMMA-NPs) on the muscle of gilthead sea bream (Sparus aurata) fingerlings was evaluated at a concentration range that includes 0.001 up to 10 mg/L. The expression of key transcripts related to cell stress, tissue repair, immune response, antioxidant status and muscle development, together with several biochemical endpoints and metabolic parameters. Results indicate that exposure to PMMA-NPs elicit mildly antioxidant responses, enhanced the acetylcholinesterase (AChE) activity, and inhibited key regulators of muscle development (growth hormone receptors ghr-1/ghr-2 and myostatin, mstn-1 transcripts). However, no effects on pro-inflammatory cytokines (interleukin 1β, il1β and tumor necrosis factor α, tnfα) expression nor on the levels of energetic substrates (glucose, triglycerides and cholesterol) were found.

AOPs enhance the migration of polystyrene nanoparticles in saturated quartz sand

Wastewater treatment plants are suspected to be significant point sources of microplastic and nanoplastic particles (NPs) in the environment. As one of the main wastewater treatment processes, advanced oxidation processes (AOPs) may change the physicochemical properties of NPs and further affect their migration. However, limited information is known about the environmental fate of NPs after AOP treatment. In this study, polystyrene nanoparticles were treated using two representative AOPs, Fenton and persulfate treatments, and the migration of the NPs in quartz sand was investigated via column transport experiments. FTIR and XPS analysis indicated that a large number of oxygen-containing groups were generated on the NP surface after AOP treatment leading to lower hydrophobicity and a higher negative charge. Besides, the C/O ratio after Fenton and persulfate treatments was increased from 10.98 to 7.25 and 8.68. Moreover, the NPs after AOP treatment exhibited higher mobility in quartz sand in both ultrapure water and 10 mM NaCl solution. It was more obvious in 10 mM NaCl solution with breakthrough percentages of 79.73% for P-PS, 90.97% for F-PS and 95.67% for N-PS, respectively. These results could be explained by the roles of generated oxygen-containing functional groups; first, the higher negative charge enhanced the electrostatic repulsion between treated NPs and sand; second, lower hydrophobicity improved the binding with water molecules in background solution. This work is helpful in understanding the changes of nanoplastics in AOP treatment and their migration in the natural environment, which has far-reaching influence on the environmental fate and behavior of nanoplastics.

An Overview of the Sorption Studies of Contaminants on Poly(Ethylene Terephthalate) Microplastics in the Marine Environment

Marine pollution is one of the biggest environmental problems, mainly due to single-use or disposable plastic waste fragmenting into microplastics (MPs) and nanoplastics (NPs) and entering oceans from the coasts together with human-made MPs. A rapidly growing worry concerning environmental and human safety has stimulated research interest in the potential risks induced by the chemicals associated with MPs/NPs. In this framework, the present review analyzes the recent advances in adsorption and desorption studies of different contaminants species, both organic and metallic, on MPs made of Poly(Ethylene terephthalate). The choice of PET is motivated by its great diffusion among plastic items and, unfortunately, also in marine plastic pollution. Due to the ubiquitous presence of PET MPS/NPs, the interest in its role as a vector of contaminants has abruptly increased in the last three years, as demonstrated by the very high number of recent papers on sorption studies in different environments. The present review relies on a chemical engineering approach aimed at providing a deeper overview of both the sorption mechanisms of organic and metal contaminants to PET MPs/NPs and the most used adsorption kinetic models to predict the mass transfer process from the liquid phase to the solid adsorbent.