Freeze/thawed polyvinyl alcohol hydrogels: Present, past and future

The formation and performance tuning mechanism of starch-based hydrogels

Starch-based hydrogels, characterized by their three-dimensional network structures, are increasingly explored for their biodegradability, low cost, and abundance of modifiable hydroxyl groups. However, a comprehensive understanding of the mechanisms behind the formation and property modulation of these hydrogels has not been systematically described. Drawing from literature of the past decade, this review provides insights into designing multifunctional starch-based hydrogels through various gelation mechanism, crosslinking strategies, and second-network structure. This comprehensive review aims to establish a theoretical framework for controlling the properties of starch-based hydrogels. A crucial aspect of starch hydrogel formation is the dense, cellular structure produced by swollen particles; when these particles fully disrupt, amylose recrystallization creates "junction zones" essential for network stability. In double-network hydrogels, materials such as polyvinyl alcohol (PVA), sodium alginate (SA), and polyacrylamide (PAM) form an effective secondary network, enhancing the mechanical strength and versatility of the hydrogel. The functionalization of starch-based hydrogels is primarily achieved through the introduction of functional group, secondary networks, and ionic liquids.

Study on the lubrication behavior of tannic acid/ poly (vinyl alcohol) hydrogel enhanced by protein adsorption for articular cartilage applications

Poly (vinyl alcohol) (PVA)-based hydrogels are widely regarded as ideal cartilage replacement materials because of their excellent properties. However, they have drawbacks such as high coefficient of friction (COF) and insufficient wear resistance. As important components of the synovial fluid, proteins are involved in counter-pairs and effect their tribological behavior via denaturation. Tannic acid (TA), which is rich in hydroxyl groups, can bind strongly proteins and change their conformation. In this study, the structure and lubrication performance of TA/PVA hydrogels in phosphate buffer saline (PBS) and bovine serum albumin (BSA) solutions were investigated. The results indicated that TA molecules enhanced the stiffness of the hydrogel by forming hydrogen bonds with PVA, reducing its COF in the PBS solution. In BSA solution, the tribological behavior of the PT hydrogels is altered by the BSA adsorbed at the hydrogel interface owing to the addition of TA. The COF of the PVA hydrogels with a TA content of 0.5 wt% is as low as 0.045, which was approximately 2.67 times lower than that of the PVA hydrogel under the same conditions. The benzene rings and hydroxyl groups in TA were connected to BSA molecules through hydrogen bonding, inducing a conformational change in the BSA from an α-helix structure to β-sheet structure, which further improves the lubricating properties of the hydrogel.

Visual colorimetric label for real-time monitoring of SO2 concentration change in grape and mango during storage

Sulfur dioxide (SO2) is widely utilized as a preservative in food transportation and storage, but excessive consumption poses health risks. This study presents a novel and efficient method for the real-time detection of SO2 using a sensor named TK, synthesized from triphenylamine and 2-cyanomethyl-1-methyl-quinolinium. The core mechanism involves the Michael addition reaction of the CC bond in TK with SO2, which disrupts the intramolecular charge transfer process, resulting in a significant color change and a blue shift in fluorescence emission. Methodologically, the sensor's response was quantified by the change in fluorescence intensity ratio (I425/I647) within a SO2 concentration range of 0-180 μM. The sensor exhibited high sensitivity and selectivity. For practical application, TK was incorporated into hydrophilic polyvinyl alcohol to create a smart label capable of visual colorimetry and fluorescence analysis. SO2 concentration changes were monitored by using this label, demonstrated by the color transition from burgundy red to colorless, yielding a maximum color difference (ΔE) of 73.6. The smart label was successfully used to monitor the quality of various grapes and mangoes during long-term storage, providing a reliable, equipment-independent method suitable for household use. The study offers a new tool for enhancing food safety and mitigating health risks associated with SO2 exposure.

PNIPAAm-based temperature responsive ionic conductive hydrogels for flexible strain and temperature sensing

Conductive hydrogels have received much attention in the field of flexible wearable sensors due to their outstanding flexibility, conductivity, sensitivity and excellent compatibility. However, most conductive hydrogels mainly focus on strain sensors to detect human motion and lack other features such as temperature response. Herein, we prepared a strain and temperature dual responsive ionic conductive hydrogel (PPPNV) with an interpenetrating network structure by introducing a covalent crosslinked network of N-isopropylacrylamide (NIPAAm) and 1-vinyl-3-butylimidazolium bromide (VBIMBr) into the skeleton of the hydrogel composed of polyvinylalcohol (PVA) and polyvinylpyrrolidone (PVP). The PPPNV hydrogel exhibited excellent anti-freezing properties (-37.34 °C) and water retention with high stretchability (∼930 %) and excellent adhesion. As a wearable strain sensor, the PPPNV hydrogel has good responsiveness and stability to a wide range of deformations and exhibits high strain sensitivity (GF=2.6) as well as fast response time. It can detect large and subtle body movements with good signal stability. As wearable temperature sensors, PPPNV hydrogels can detect human physiological signals and respond to temperature changes, and the volumetric phase transition temperature (VPTT) can be easily controlled by adjusting the molar ratio of NIPAAm to VBIMBr. In addition, a bilayer temperature-sensitive hydrogel was prepared with the temperature responsive hydrogel by two-step synthesis, which shows great promising applications in temperature actuators.

Tailoring the mechanical properties of macro-porous PVA hydrogels for biomedical applications

Polyvinyl alcohol (PVA) is a biocompatible biopolymer with superior dimensional and mechanical stability when compared to naturally available biomaterials such as collagen and gelatin. Furthermore, PVA in hydrogel form behaves non-linearly during mechanical loading, generating a response like soft biological tissues. Generally, PVA hydrogels are fabricated using freeze-thaw cycles (FTCs) and changing the number of FTCs gives control over its mechanical properties. Porosity of the hydrogel is another important factor which determines its mechanical properties and is also evident in biological soft tissues. Incorporating macro-pores in PVA hydrogels substantially reduces the stiffness of the material and can mimic some porous tissues such as lung, liver, bone marrow, kidneys, and penile tissues (corpus cavernosa and spongiosum). Within this study, we developed macro-porous PVA hydrogels using the freeze-thaw process followed by particulate leaching of sacrificial 3D-printed and milled PVA (m-PVA) filler particles. This fabrication method enables control over the porosity in macro-porous PVA hydrogels, which is crucial not only for tuning mechanical properties but also for mimicking the structure of spongy tissues, such as liver tissue and corpus cavernosum in the penis, for example. We investigated the level of porosity in the specimen using optical microscopy to understand the distribution of the pores and the pore size. The tunability of the mechanical properties of PVA hydrogels is a key finding of this study and is achieved using three factors: (i) weight percentage of sacrificial fillers, (ii) number of FTCs and (iii) concentration of PVA. These macro-porous PVA specimens have wide ranging biomedical applications as biological soft tissue analogues, or tissue engineering scaffolds, where the PVA hydrogel can be tuned to match the mechanical properties of these soft biological tissues.

Antioxidant and antibacterial coconut mesocarp polyphenol hydrogel dressing based on PVA/quaternary chitosan/sodium alginate with β-glycerophosphate

This study developed PQSp wound dressing hydrogels (S0-S6) using polyvinyl alcohol (PVA), quaternary chitosan (QCS), and sodium alginate (SA) as the matrix, with the addition of coconut mesocarp polyphenol (P-CTP, 0.1 %, 0.5 %, and 1.0 %) and β-glycerophosphate disodium (GP, 1.0 %) through a freeze-thaw method. Compared to hydrogels without P-CTP and GP (S0), the tensile strength of S1-S6 increased from 0.08 MPa to 0.45 MPa, elongation at break improved from 200 % to 320 %, and the swelling ratio decreased from 186 % to 82 % due to the effects of P-CTP and GP, while maintaining water content above 80 %, ensuring a moist environment for wound healing. Their thermal stability was also improved. SEM, FTIR, and XPS results confirmed enhanced crosslinking within the multi-network of the hydrogels, attributed to the increased hydrogen bonding from GP and P-CTP, independent of chemical crosslinking. However, antioxidant and antibacterial activities were dose-dependent only on P-CTP, with S3 and S6 showing the best effects. CAM and chicken embryo assays confirmed the hydrogels' non-toxicity and biocompatibility. These findings suggest that PQSp hydrogels, with their excellent mechanical properties, bioactivity, and safety, hold great potential for advanced wound dressing applications and provide a reference for expanding the application range of P-CTP.

Fracture Behavior and Biocompatibility of Cellulose Nanofiber-Reinforced Poly(vinyl alcohol) Composite Hydrogels Cross-Linked with Borax

We investigated the fracture behavior of cellulose nanofiber (CNF)-reinforced poly(vinyl alcohol) (PVA) hydrogels cross-linked with borax and the effect of freeze-thaw (FT) cycles on it. The CNF/PVA/Borax hydrogel not subjected to FT achieved a fracture energy of 5.8 kJ m-2 and a dissipative length of 2.3 mm, comparable to those of tough hydrogels. Lacking either CNF or borax remarkably decreased the fracture energy and the dissipative length; CNF contributed to a physical blocking of the crack growth, whereas the complexations between CNF and borate yielded nonlocalization of energy dissipation. Repeated FT cycles markedly improved the mechanical performance of unnotched samples, but they decreased the fracture energy due to the lowering of the dissipative length. Besides, CNF/PVA/Borax hydrogels were suitable for cell scaffold materials. The culture of umbilical cord mesenchymal stem cells (UC-MSCs) revealed a positive correlation between culture duration and the number of UC- MSCs adherent to the material.

Hydrogel-Forming Microneedles and Applications in Interstitial Fluid Diagnostic Devices

Hydrogel-forming microneedles are constructed from or coated with polymeric, hydrophilic materials that swell upon insertion into the skin. Designed to dissolve or disintegrate postinsertion, these microneedles can deliver drugs, vaccines, or other therapeutics. Recent advancements have broadened their application scope to include the collection, transport, and extraction of dermal interstitial fluid (ISF) for medical diagnostics. This review presents a brief introduction to the characteristics of dermal ISF, methods for extraction and sampling, and critical assessment of the state-of-the-art in hydrogel-forming microneedles for ISF diagnostics. Key factors are evaluated including material composition, swelling behavior, biocompatibility, and mechanical strength necessary for effective microneedle performance and ISF collection. The review also discusses successful examples of dermal ISF assays and microneedle sensor integrations, highlighting notable achievements, identifying research opportunities, and addressing challenges with potential solutions. Despite the predominance of synthetic hydrogels in reported hydrogel-forming microneedle technologies due to their favorable swelling and gelation properties, there is a significant variety of biopolymers and composites reported in the literature. The field lacks consensus on the optimal material, composition, or fabrication methods, though emerging evidence suggests that processing and fabrication techniques are critical to the performance and utility of hydrogel-forming microneedles for ISF diagnostics.

Modification of Antibacterial Copolymers on the Surface of PVA-Based Microfibers via Thermal Cross-Linking and Their Antibacterial Properties

Bacterial infections on material surfaces are a serious public health concern worldwide. Although poly(vinyl alcohol) (PVA)-based materials have great potential as medical devices, they lack antibacterial properties on their surfaces and pose bacterial infection risks during implantation surgery. Copolymers containing antibacterial [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) units were used to modify the surfaces of chemically cross-linked water-insoluble PVA-based microfibers. The copolymers also had carboxy units that were used to react with the hydroxy group of the PVA-based microfibers via a simple thermal treatment at 135 °C. PVA-based materials containing METAC units exhibit significant swelling due to electrostatic repulsions. Because the copolymers were modified on the extreme surface of the microfibers, no difference in the diameters between unmodified microfibers (PM-fiber) and copolymers with METAC unit-modified microfibers (PM-METAC-fiber), in both the dry and swollen states, was observed. The viable bacterial cell numbers, which were evaluated by colony counting, decreased by exposure to the poly(METAC-co-methacrylic acid (MAAc)) aqueous solution or PM-METAC-fibers. The value of CFU/mL decreased to 0.1% (against B. subtilis) and 3.9% (against E. coli) after contact with the PM-METAC-fibers compared to the PM-fibers. The percentage of hemolysis against rabbit red blood cells was equivalent to that of the negative control, suggesting that PM-METAC-fibers can selectively exhibit antibacterial properties. This modification method can be applied to various PVA-based materials if hydroxy groups are present on their surface. This study provides a facile, cost-effective, and promising strategy to impart antibacterial properties to the surface of PVA-based materials without significantly affecting their physicochemical properties.

Cryostructuring of Polymeric Systems: 68. Evaluation of Poly(vinyl alcohol) Composite Cryogels Filled with Poly(3-hydroxybutyric acid)-Based Microspheres of Different Porous Morphology as Potential Delivery Systems for Drugs of Various Water-Solubility

Poly(3-hydroxybutyric acid)-based microspheres of two types, with and without macropores, were prepared; their morphology and particle size were evaluated. These microspheres were entrapped as disperse fillers into the bulk of macroporous cryogels based on poly(vinyl alcohol) (PVA). It was found that the rigidity of the resultant composite cryogels increased markedly as compared to that of unfilled cryogels of the same PVA concentration. The resulting composites were further tested for their potential to act as drug carriers. With that, simvastatin was included into the filler particles directly in the course of their preparation, followed by entrapment of such drug-loaded microspheres into the PVA cryogel. In turn, ibuprofen sodium salt was introduced into the preliminary prepared cryogels filled with the drug-free microspheres. The experimental study of drug release kinetics showed that due to the non-covalent interactions of both simvastatin and ibuprofen sodium salt with the particles of discrete phase, prolongation of the release processes was observed.

Microencapsulation of Bifidobacterium lactis and Lactobacillus plantarum within a Novel Polysaccharide-Based Core-Shell Formulation: Improving Probiotic Viability and Mucoadhesion

Probiotics health benefits are hampered by long-term storage, gastrointestinal transit, and lack of adequate colonization within the colon. To this end, we have designed a core-shell structure that features an acid resistant core formulation with low water activity composed of alginate, hydroxypropyl methyl cellulose, and gellan gum (AHG) and a mucoadhesive shell made from chemically modified carboxymethyl chitosan with polyethylenimine (PEI-CMC). The structure of the core-shell microparticles was examined using scanning electron microscopy, and rheological measurements confirmed the improved ionic interactions between the core and the shell using the PEI-modified CMC. Simulated release from core-shell microparticles using polystyrene beads showed preferential release under intestinal conditions. PEI-CMC coating yielded improvements in mucoadhesion that was consistent with a positive shift in surface charge of the particles. Ex vivo studies using Bifidobacterium lactis probiotic bacteria demonstrated a 1.1 × 105-fold improvement in bacterial viability with encapsulation under storage conditions of high humidity and temperature (30 °C). When exposed to simulated gastric fluid, encapsulation increased the probiotic viability by 3.0 × 102-fold. In vivo studies utilizing bioluminescent Lactobacillus plantarum in mice revealed that encapsulation extended the duration of the signal within the gut and resulted in higher plate counts in suspensions isolated from the cecum. Conversely, we observed an abrupt loss of signal in the gut of the free probiotic. In conclusion, this core-shell system is suitable for improving probiotic shelf life and maximizing delivery to and retention by the colon.

Biodegradable and Implantable Triboelectric Nanogenerator Improved by β-Lactoglobulin Fibrils-Assisted Flexible PVA Porous Film

Triboelectric nanogenerators (TENGs) are highly promising as implantable, degradable energy sources and self-powered sensors. However, the degradable triboelectric materials are often limited in terms of contact electrification and mechanical properties. Here, a bio-macromolecule-assisted toughening strategy for PVA aerogel-based triboelectric materials is proposed. By introducing β-lactoglobulin fibrils (BF) into the PVA aerogel network, the material's mechanical properties while preserving its swelling resistance is significantly enhanced. Compared to pure PVA porous film, the BF-PVA porous film exhibits an eightfold increase in fracture strength (from 1.92 to 15.48 J) and a fourfold increase in flexibility (from 10.956 to 39.36 MPa). Additionally, the electrical output of BF-PVA in triboelectric performance tests increased nearly fivefold (from 45 to 203 V). Leveraging these enhanced properties, a biodegradable TENG (bi-TENG) for implantable muscle activity sensing is developed, achieving real-time monitoring of neuromuscular processes. This innovation holds significant potential for advancing implantable medical devices and promoting new applications in bio-integrated electronics.

Effect of Mild Conditions on PVA-Based Theta Gel Preparation: Thermal and Rheological Characterization

Polyvinyl alcohol (PVA), possessing a strong ability to form hydrogels, has been widely used for various pharmaceutical and biomedical applications. In particular, the use of PVA-PEG in the form of theta gels for altered cartilage treatment has attracted an enormous amount of attention in the last 20 years. In this paper, we prepared 42 PVA-PEG in the form of theta gels at room temperature in an aqueous environment, testing the crystallization occurrence at basic pH (10 or 12). Using a statistical approach, the effect of PEG molecular weight, PVA molecular weight and alkaline pH values on water content and mechanical performance was evaluated. The used procedure permitted the theta gels to maintain swelling properties comparable to those of human cartilage, from 60% to 85%, with both polymers having the same influence. PEG MW mainly affected the hydrophilic properties, whereas the thermal properties were mostly influenced by the PVA. The shear and compression mechanical behavior of the produced materials were affected by both the polymers' MWs. The sample obtained using PVA 125 kDa with PEG 20 kDa as a porogen appeared to be the most suitable one for cartilage disease treatment, as it had an equilibrium shear modulus in the range of 50-250 kPa, close to that of native articular cartilage, as well as optimal mechanical response under compression along the entire analyzed frequency range with a mean value of 0.12 MPa and a coefficient of friction (COF) which remained under 0.10 for all the tested sliding speeds (mm/s).

Highly deformable bi-continuous conducting polymer hydrogels for electrochemical energy storage

Conducting polymer hydrogels with inherent flexibility, ionic conductivity and environment friendliness are promising materials in the fields of energy storage. However, a trade-off between mechanical and electrochemical properties has limited the development of flexible/stretchable conducting polymer hydrogel electrodes, owing to the intrinsic conflict among mechanical and electrical phases. Here, we report a reliable design to enable conducting polymer with both exceptional mechanical and electrical/electrochemical performance through the construction of bi-continuous conducting polymer crosslinked network. The resultant bi-continuous conducting polymer hydrogels (BCPH) demonstrate significantly improved mechanical and electrochemical properties compared to the conventional conducting polymer hydrogel (CPH) electrode. BCPH presents a high specific capacitance of 715 F g-1 at 0.5 A/g, a high mechanical strength (∼1 MPa) and a large stretchability (∼300%). Enabled by such intrinsically deformability and electrochemical properties, we further demonstrate its utility in flexible solid-state supercapacitor (FSSC), which exhibits an outstanding specific capacitance of 760 mF cm-2 at 2 mA cm-2, excellent electrochemical stability with 81% capacitance retention after 5000 charge/discharge cycles, and superior bending cycle stability. This simple and scalable strategy provides a platform for the fabrication of high-performance conducting hydrogel electrodes for various wearable electronic equipment.

Biomimetic Structural Hydrogels Reinforced by Gradient Twisted Plywood Architectures

Naturally structural hydrogels such as crustacean exoskeletons possess a remarkable combination of seemingly contradictory properties: high strength, modulus, and toughness coupled with exceptional fatigue resistance, owing to their hierarchical structures across multiple length scales. However, replicating these unique mechanical properties in synthetic hydrogels remains a significant challenge. This work presents a synergistic approach for constructing hierarchical structural hydrogels by employing cholesteric liquid crystal self-assembly followed by nanocrystalline engineering. The resulting hydrogels exhibit a long-range ordered gradient twisted plywood structure with high crystallinity to mimic the design of crustacean exoskeletons. Consequently, the structural hydrogels achieve an unprecedented combination of ultrahigh strength (46 ± 3 MPa), modulus (496 ± 25 MPa), and toughness (170 ± 14 MJ m-3), together with recorded high fatigue threshold (32.5 kJ m-2) and superior impact resistance (48 ± 2 kJ m-1). Additionally, through controlling geometry and compositional gradients of the hierarchical structures, a programmable shape morphing process allows for the fabrication of complex 3D hydrogels. This study not only offers valuable insights into advanced design strategies applicable to a broad range of promising hierarchical materials, but also pave the ways for load-bearing applications in tissue engineering, wearable devices, and soft robotics.

Hericium erinaceus β-glucan/tannic acid hydrogels based on physical cross-linking and hydrogen bonding strategies for accelerating wound healing

The majority of natural fungal β-glucans exhibit diverse biological functionalities, such as immunomodulation and anti-inflammatory effects, attributed to their distinctive helix or highly branched conformation This study utilized β-glucan with helix conformation and high-viscosity extracted from Hericium erinaceus, employing freeze-thaw and solvent exchange strategies to induce multiple hydrogen bonding between molecules, thereby initiating the self-assembly process of β-glucan from random coil to stable helix conformation without chemical modifications. Subsequently, the natural bioactive compound tannic acid was introduced through physical entanglement, imparting exceptional antioxidant properties to the hydrogel. The HEBG/TA hydrogel exhibited injectable properties, appropriate mechanical characteristics, degradability, temperature-responsive tannic acid release, antioxidant activity, and hemostatic potential. In vivo experiments using skin full-thickness defect and deep second-degree burn wound models demonstrated significant therapeutic efficacy, including neovascularization, and tissue regeneration. Moreover, the HEBG/TA hydrogel demonstrated its ability to regulate cytokines by effectively inhibiting the production of inflammatory mediators (TNF-α, IL-6), while simultaneously enhancing the expression of cell proliferation factor KI-67 and markers associated with angiogenesis such as CD31 and α-SMA. This study highlights the potential of combining natural β-glucan with bioactive molecules for skin repair.

α-Amylase and polydopamine@polypyrrole-based hydrogel microneedles promote wound healing by eliminating bacterial infection

In this paper, we designed a novel "Freeze-thaw" type hydrogel microneedle (PP-CDLut-AMY MN). The "Freeze-thaw" cycle endows the MN excellent water absorption, with a dissolution rate of up to 486 %. The addition of polydopamine@polypyrrole (PP) enabled the MN to have a stable temperature increase to approximately 50 °C under near-infrared light irradiation, which exhibited killing rates of 99 % and 98 % against free S. aureus and E. coli, respectively. Natural macromolecule α-Amylase (AMY) was used as a bacterial biofilm disintegrator, and the destruction rate of S. aureus biofilm reached 83.2 %. Meanwhile, the incorporation of Hydroxypropyl-β-cyclodextrin @Luteolin (CDLut) provided the MN with good antioxidant properties, which could scavenge 73.35 % of DPPH free radicals. In vivo experiments have shown that the MN can effectively promote the healing of wounds infected by S. aureus biofilm and that the stable and gentle photothermal effect did not cause unnecessary damage to the surrounding tissues. We believe that this novel hydrogel MN has great potential to combat bacterial biofilms associated with wound infections.

Concurrently Improving both Mechanical and Electrochemical Performances of Quasi-Solid-State Electrical Double-Layer Capacitors by a Rational Design of Gel Polymer Electrolytes

Aqueous poly(vinyl alcohol) (PVA) gel electrolyte-based quasi-solid-state electrical double-layer capacitors (QSEDLCs) have been extensively investigated in the past ten years, but challenges remain to fabricate the PVA gel electrolyte possessing both superior mechanical and outstanding electrochemical performances. Herein, we develop a strategy to address this issue by a rational design of PVA gel electrolytes, based on a combination of the freeze-thaw (FT) method and sodium perchlorate (NaClO4)-based water-in-salt (WIS) electrolyte. Our study demonstrates that either the FT method or the NaClO4-based WIS electrolyte can improve both the mechanical performance of the PVA gel electrolyte by increasing the crystallization of PVA chains and the electrochemical performance of the PVA gel electrolyte-based QSEDLC by different mechanisms. In comparison with the conventional solvent evaporation method, this work provides an effective strategy to concurrently improve both the mechanical and electrochemical performances of aqueous QSEDLCs.

Hydrophilic-Hydrophobic Network Hydrogels Achieving Optimal Strength and Hysteresis Balance

The biocompatibility and adaptability of hydrogels make them ideal candidates for use as artificial tendons and muscles in clinical applications, where both muscle-like strength and low hysteresis are essential. However, achieving a balance between a high strength and low hysteresis in hydrogels remains a significant challenge. Herein, we demonstrated a self-assembly process of heterogeneous hydrogels to meet the dilemma. And the hydrogels are composed of both hydrophilic and hydrophobic polymers. The hydrophilic network absorbs water, causing phase separation into a water-rich phase and a water-poor phase, while hydrophobic polymers and entanglement of the network arrest phase separation. Our results demonstrated that these hydrogels achieve remarkable mechanical properties, with a strength of 848.8 kPa, a low energy loss of 19.6 kJ/m3, and minimal hysteresis (0.046) during loading-unloading cycles. The reinforcing mechanisms underlying these properties are attributed to crystallization, molecular entanglement, and chain rearrangement induced by stretching. Furthermore, the combination of hydrophilic and hydrophobic networks is exceedingly rare in reported hydrogels.

A Polyvinyl Alcohol (PVA)-Based Phantom for Prostate Cancer Detection Using Multiparametric Ultrasound: A Validation Study

Multiparametric ultrasound (mpUS) enhances prostate cancer (PCa) diagnosis by using multiple imaging modalities. Tissue-mimicking materials (TMM) phantoms, favoured over animal models for ethical and consistency reasons, were created using polyvinyl alcohol (PVA) with varying molecular weights (Mw).

METHODS

Four PVA samples, varying in Mw with constant concertation, were mixed with glycerol, silicon carbide (SiC), and aluminium oxide (Al2O3). Phantoms with varying depth and inclusion sizes were created and tested using shear-wave elastography (SWE). An mpUS phantom was developed to mimic prostate tissue, including isoechoic and hypoechoic inclusions and vessels. The phantom was scanned using supersonic ultrasound, strain elastography, and Doppler ultrasound. Validation was performed using radical prostatectomy data and shear-wave elastography.

RESULTS

The acoustic properties varied with enhancers like glycerol and Al2O3. Low Mw PVA samples had a speed of sound ranging from 1547.50 ± 2 to 1553.70 ± 2.2 m/s and attenuation of 0.61 ± 0.062 to 0.63 ± 0.05 dB/cm/MHz. High Mw PVA samples ranged from 1555 ± 2.82 to 1566 ± 4.5 m/s and 0.71 ± 0.02 to 0.73 ± 0.046 dB/cm/MHz. Young's modulus ranged from 11 ± 2 to 82.3 ± 0.5 kPa across 1 to 10 freeze-thaw cycles. Inclusion size, depth, and interaction statistically affect the SWE measurements with p-value = 0.056327, p-value = 8.0039 × 10-8, and p-value = 0.057089, respectively. SWE showed isoechoic inclusions, prostate tissue, and surrounding tissue only. The Doppler velocity was measured in three different inner diameters.

CONCLUSION

PVA mixed with enhancer materials creates an mpUS phantom with properties that mimic normal and abnormal prostate tissue, blood vessels, and soft tissue, facilitating advanced diagnostic training and validation.

Hydroxypropyl methylcellulose reinforced bilayer hydrogel dressings containing L-arginine-modified polyoxometalate nanoclusters to promote healing of chronic diabetic wounds

Diabetes-related slow healing of wounds is primarily driven by bacterial infections and angiogenesis disorder and presents a substantial hurdle in clinical treatment. To solve the above problems, an advanced multifunctional hydrogel system based on natural polymer was created here to facilitate wound healing in patients with chronic diabetes. The prepared dressing was composed of an outer hydrogel containing polyvinyl alcohol and hydroxypropyl methyl cellulose in dimethyl sulfoxide and water as binary solvents, and an inner hydrogel containing chitosan quaternary ammonium salt, flaxseed gum, and polyvinyl alcohol. Thus, a polysaccharide based bilayer hydrogel (BH) with superior mechanical strength and biocompatibility was created. This bilayer hydrogel could easily bind to dynamic tissue surfaces, thereby generating a protective barrier. Meanwhile, L-arginine-modified polyoxometalate (POM@L-Arg) nanoclusters were loaded in the inner hydrogel. They released NO when stimulated by the peroxide microenvironment of diabetic wounds. NO as a signal molecule regulated vascular tension and promoted cell proliferation and migration. Additionally, because of the synergistic effect of NO and the chitosan quaternary ammonium salt, the hydrogel system exhibited excellent antibacterial performance. The NO released reduced the levels of proinflammatory factors IL-6 and TNF-α in the diabetic wounds, which thus accelerated wound healing. In short, BH + POM@L-Arg is expected to serve as an ideal wound dressing as it exerts a good promotion effect on diabetes-related wound healing.

Molecular Chain Rearrangement-Induced In Situ Formation of Nanofibers for Improving the Strength and Toughness of Hydrogels

Although poly(vinyl alcohol) (PVA) hydrogel has high elasticity and is suitable for cartilage tissue engineering, it is difficult to have both high strength and toughness. In this study, a simple and universal strategy is proposed to prepare strong and tough PVA hydrogels by in situ forming nanofibers on the original network structure induced by a molecular chain rearrangement. Quenching-tempering alteratively in ethanol and water several times is carried out to strengthen PVA hydrogels (PVA-Etn hydrogels) due to the advantages of noncovalent bonds in adjustability and reversibility. The results show that, after three quenching-tempering cycles, PVA-Et3 hydrogel with water content up to 79 wt % shows comprehensive improved mechanical properties. The compression modulus, tensile modulus, fracture strength, tensile strain, and tear energy of the PVA-Et3 hydrogel are 270, 250, 260, 130, and 180% of the initial PVA hydrogel, respectively. The improved mechanical properties of the PVA-Et3 hydrogel are attributed to the strong cross-linked PVA chains and hydrogen bond-reinforced nanofibers. This study not only provides a simple and efficient solution for the preparation of strong and tough polymer scaffolds in tissue engineering but also provides new insights for understanding the mechanism of improving the mechanical properties of polymer hydrogels by adjusting the molecular structure.

pH-Responsive Degradable Electro-Spun Nanofibers Crosslinked via Boronic Ester Chemistry for Smart Wound Dressings

Recent advances in the treatment of chronic wounds have focused on the development of effective strategies for cutting-edge wound dressings based on nanostructured materials, particularly biocompatible poly(vinyl alcohol) (PVA)-based electro-spun (e-spun) nanofibers. However, PVA nanofibers need to be chemically crosslinked to ensure their dimensional stability in aqueous environment and their capability to encapsulate bioactive molecules. Herein, a robust approach for the fabrication of pH-degradable e-spun PVA nanofibers crosslinked with dynamic boronic ester (BE) linkages through a coupling reaction of PVA hydroxyl groups with the boronic acid groups of a phenyl diboronic acid crosslinker is reported. This comprehensive analysis reveals the importance of the mole ratio of boronic acid to hydroxyl group for the fabrication of well-defined BE-crosslinked fibrous mats with not only dimensional stability but also the ability to retain uniform fibrous form in aqueous solutions. These nanofibers degrade in both acidic and basic conditions that mimic wound environments, leading to controlled/enhanced release of encapsulated antimicrobial drug molecules. More importantly, drug-loaded BE-crosslinked fibers show excellent antimicrobial activities against both Gram-positive and Gram-negative bacteria, suggesting that this approach of exploring dynamic BE chemistry is amenable to the development of smart wound dressings with controlled/enhanced drug release.

Polyvinyl Alcohol (PVA)-Based Hydrogels: Recent Progress in Fabrication, Properties, and Multifunctional Applications

Polyvinyl alcohol (PVA)-based hydrogels have attracted significant attention due to their excellent biocompatibility, tunable mechanical properties, and ability to form stable three-dimensional networks. This comprehensive review explores the recent advancements in PVA-based hydrogels, focusing on their unique properties, fabrication strategies, and multifunctional applications. Firstly, it discusses various facile synthesis techniques, including freeze/thaw cycles, chemical cross-linking, and enhancement strategies, which have led to enhanced mechanical strength, elasticity, and responsiveness to external stimuli. These improvements have expanded the applicability of PVA-based hydrogels in critical areas such as biomedical, environmental treatment, flexible electronics, civil engineering, as well as other emerging applications. Additionally, the integration of smart functionalities, such as self-healing capabilities and multi-responsiveness, is also examined. Despite progress, challenges remain, including optimizing mechanical stability under varying conditions and addressing potential toxicity of chemical cross-linkers. The review concludes by outlining future perspectives, emphasizing the potential of PVA-based hydrogels in emerging fields like regenerative medicine, environmental sustainability, and advanced manufacturing. It underscores the importance of interdisciplinary collaboration in realizing the full potential of these versatile materials to address pressing societal challenges.

Lignosulfonate-doped polyaniline-reinforced poly(vinyl alcohol) hydrogels as highly sensitive, antimicrobial, and UV-resistant multifunctional sensors

Flexible wearable strain sensors exist the advantages of high resolution, lightweight, wide measurement range, which have unlimited potential in fields such as soft robotics, electronic skin, and artificial intelligence. However, current flexible sensors based on hydrogels still have some defects, including poor mechanical properties, self-adhesive properties and bacteriostatic properties. In this study, A conductive hydrogel Sodium Ligninsulfonate (LGS)@PANI-Ag-poly(vinyl alcohol) (PVA) hydrogels consisting of lignosulfonate-doped polyaniline (LGS@PANI), silver nitrate, and PVA interactions were designed and prepared for sensing applications. Here, the abundant reactive functional groups of lignosulfonates not only improve the electrochemical and electrical conductivity of polyaniline, thereby increasing its potential for sensing and capacitor applications, but also provide excellent mechanical properties (0.71 MPa), self-adhesion (81.27 J/m2) and ultraviolet (UV) resistance (UV inhibition close to 100 %) to the hydrogel. In addition, the hydrogel exhibited rich multifunctional properties, including tensile strain resistance (up to 397 %), antimicrobial properties (up to 100 % inhibition of Escherichia coli and Staphylococcus aureus), high sensitivity (gauge factor, GF = 4.18), and a rapid response time (100 ms). The LGS@PANI-Ag-PVA hydrogels showed potential for wearable sensors that monitor various biosignals from the human body, as well as human-computer interaction, artificial intelligence and other diverse fields.

Critical assessment of water enthalpy characterization through dark environment evaporation

Comparative evaporation rate testing in a dark environment, commonly used to characterize a reduced vaporization enthalpy in interfacial solar evaporators, requires the assumption of equal energy input between cases. However, this assumption is not generally valid, leading to misleading characterization results. Interfacial evaporators yield larger evaporation rates in dark conditions due to enlarged liquid-vapor surface areas, resulting in increased evaporative cooling and larger environmental temperature differentials. Theoretical and experimental evidence is provided, which shows that these temperature differences invalidate the equal energy input assumption. The results indicate that differences in evaporation rates correspond to energy input variations, without requiring enthalpy to be reduced below theoretical values. These findings offer alternative explanations for previous claims of reduced vaporization enthalpy and contradict enthalpy-related conclusions drawn from differential scanning calorimetry. We conclude that postulating a reduced vaporization enthalpy using the dark environment method is inaccurate and that re-evaluation of vaporization enthalpy reduction is required.

Zwitterionic modified and freeze-thaw reinforced foldable hydrogel as intraocular lens for posterior capsule opacification prevention

Posterior capsule opacification (PCO) is a predominant postoperative complication, often leading to visual impairment due to the aberrant proliferation and adhesion of lens epithelial cells (LECs) and protein precipitates subsequent to intraocular lens (IOL) implantation. To address this clinical issue, a foldable and antifouling sharp-edged IOL implant based on naturally-derived cellulose hydrogel is synthesized. The mechanical strength and transparency of the hydrogel is enhanced via repeated freeze-thaw (FT) cycles. The incorporated zwitterionic modifications can remarkably prevent the incidence of PCO by exhibiting proteins repulsion and cell anti-adhesion properties. The graft of dopamine onto both the haptic and the periphery of the posterior surface ensures the adhesion of the hydrogel to the posterior capsule and impedes the migration of LECs without compromising transparency. In in vivo study, the zwitterionic modified foldable hydrogel exhibits uveal and capsular biocompatibility synchronously with no signs of inflammatory response and prevent PCO formation, better than that of commercialized and PEG-modified IOL. With foldability, endurability, antifouling effect, and adhesive to posterior capsule, the reported hydrogel featuring heterogeneous surface design displays great potential to eradicate PCO and attain post-operative efficacy after cataract surgery.

Engineering Tough and Elastic Polyvinyl Alcohol-Based Hydrogel with Antimicrobial Properties

Hydrogels have been extensively used for tissue engineering applications due to their versatility in structure and physical properties, which can mimic native tissues. Although significant progress has been made towards designing hydrogels for soft tissue repair, engineering hydrogels that resemble load-bearing tissues is still considered a great challenge due to their specific mechano-physical demands. Here, we report microporous, tough, yet highly compressible poly(vinyl alcohol) (PVA)-based hydrogels for potential applications in repairing or replacing different load-bearing tissues. The synergy of freeze-thawing and the Hofmeister effect, which controlled the spatial arrangement and aggregation of polymer chains, facilitated the formation of micro-structured frameworks with tunable porosity. While the maximum mechanical strength, toughness, and stretchability of the engineered hydrogel were ~390 kPa, ~388 kJ/m3, and ~170%, respectively, the Young's modulus based on compression testing was found to be in the range of ~0.02 - 0.30 MPa, highlighting the all-in-one mechanically enriched nature of the hydrogel system. Furthermore, the minimal swelling and degradation rate of the engineered hydrogel met the specific requirements of load-bearing tissues. Finally, excellent antibacterial resistance as well as in vitro biocompatibility of the hydrogel demonstrated its potential for the replacement of load-bearing tissues.

Research on the Thermal Aging Mechanism of Polyvinyl Alcohol Hydrogel

Polyvinyl alcohol (PVA) hydrogels find applications in various fields, including machinery and tissue engineering, owing to their exceptional mechanical properties. However, the mechanical properties of PVA hydrogels are subject to alteration due to environmental factors such as temperature, affecting their prolonged utilization. To enhance their lifespan, it is crucial to investigate their aging mechanisms. Using physically cross-linked PVA hydrogels, this study involved high-temperature accelerated aging tests at 60 °C for 80 d and their performance was analyzed through macroscopic mechanics, microscopic morphology, and microanalysis tests. The findings revealed three aging stages, namely, a reduction in free water, a reduction in bound water, and the depletion of bound water, corresponding to volume shrinkage, decreased elongation, and a "tough-brittle" transition. The microscopic aging mechanism was influenced by intermolecular chain spacing, intermolecular hydrogen bonds, and the plasticizing effect of water. In particular, the loss of bound water predominantly affected the lifespan of PVA hydrogel structural components. These findings provide a reference for assessing and improving the lifespan of PVA hydrogels.

Recent advances in ionic thermoelectric systems and theoretical modelling

Converting waste heat from solar radiation and industrial processes into useable electricity remains a challenge due to limitations of traditional thermoelectrics. Ionic thermoelectric (i-TE) materials offer a compelling alternative to traditional thermoelectrics due to their excellent ionic thermopower, low thermal conductivity, and abundant material options. This review categorizes i-TE materials into thermally diffusive and thermogalvanic types, with an emphasis on the former due to its superior thermopower. This review also highlights the i-TE materials for creating ionic thermoelectric supercapacitors (ITESCs) that can generate significantly higher voltages from low-grade heat sources compared to conventional technologies. Additionally, it explores thermogalvanic cells and combined devices, discussing key optimization parameters and theoretical modeling approaches for maximizing material and device performance. Future directions aim to enhance i-TE material performance and address low energy density challenges for flexible and wearable applications. Herein, the cutting-edge of i-TE materials are comprehensively outlined, empowering researchers to develop next-generation waste heat harvesting technologies for a more sustainable future.

Rational Design of a Multifunctional Hydrogel Trap for Water and Fertilizer Capture: A Review

Water scarcity and land infertility pose significant challenges to agricultural development, particularly in arid and semiarid regions. Improving soil-water-retention capacity and fertilizer utilization efficiency through the application of soil additives has become a pivotal approach in agricultural practices. Hydrogels exhibit exceptional water absorption and fertilizer retention capabilities, making them extensively utilized in the fields of agriculture, forestry, and desert control. Currently, most reviews primarily focus on the raw materials, classification, synthesis methods, and application prospects of hydrogels, with limited attention given to strategies for enhancing water-retention performance, mechanisms underlying fertilizer absorption, and environmental risks. This review covers the commonly used cross-linking methods in hydrogel synthesis and the structure-activity relationship between hydrogels and water as well as fertilizer. Additionally, a thorough analysis of the ecological benefits and risks associated with hydrogels is presented. Finally, future prospects and challenges are delineated from the perspectives of material design and engineering applications.

Patterned PVA Hydrogels with 3D Petri Dish® Micro-Molds of Varying Topography for Spheroid Formation of HeLa Cancer Cells: In Vitro Assessment

Cell spheroids are an important three-dimensional (3D) model for in vitro testing and are gaining interest for their use in clinical applications. More natural 3D cell culture environments that support cell-cell interactions have been created for cancer drug discovery and therapy applications, such as the scaffold-free 3D Petri Dish® technology. This technology uses reusable and autoclavable silicone micro-molds with different topographies, and it conventionally uses gelled agarose for hydrogel formation to preserve the topography of the selected micro-mold. The present study investigated the feasibility of using a patterned Poly(vinyl alcohol) hydrogel using the circular topography 12-81 (9 × 9 wells) micro-mold to form HeLa cancer cell spheroids and compare them with the formed spheroids using agarose hydrogels. PVA hydrogels showed a slightly softer, springier, and stickier texture than agarose hydrogels. After preparation, Fourier transform infrared (FTIR) spectra showed chemical interactions through hydrogen bonding in the PVA and agarose hydrogels. Both types of hydrogels favor the formation of large HeLa spheroids with an average diameter of around 700-800 µm after 72 h. However, the PVA spheroids are more compact than those from agarose, suggesting a potential influence of micro-mold surface chemistry on cell behavior and spheroid formation. This was additionally confirmed by evaluating the spheroid size, morphology, integrity, as well as E-cadherin and Ki67 expression. The results suggest that PVA promotes stronger cell-to-cell interactions in the spheroids. Even the integrity of PVA spheroids was maintained after exposure to the drug cisplatin. In conclusion, the patterned PVA hydrogels were successfully prepared using the 3D Petri Dish® micro-molds, and they could be used as suitable platforms for studying cell-cell interactions in cancer drug therapy.

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress

In response to the burgeoning interest in the development of highly conformable and resilient flexible electronic sensors capable of transducing diverse physical stimuli, this review investigates the pivotal role of natural polymers, specifically those derived from starch, in crafting sustainable and biocompatible sensing materials. Expounding on cutting-edge research, the exploration delves into innovative strategies employed to leverage the distinctive attributes of starch in conjunction with other polymers for the fabrication of advanced sensors. The comprehensive discussion encompasses a spectrum of starch-based materials, spanning all-starch-based gels to starch-based soft composites, meticulously scrutinizing their applications in constructing resistive, capacitive, piezoelectric, and triboelectric sensors. These intricately designed sensors exhibit proficiency in detecting an array of stimuli, including strain, temperature, humidity, liquids, and enzymes, thereby playing a pivotal role in the continuous and non-invasive monitoring of human body motions, physiological signals, and environmental conditions. The review highlights the intricate interplay between material properties, sensor design, and sensing performance, emphasizing the unique advantages conferred by starch-based materials, such as self-adhesiveness, self-healability, and re-processibility facilitated by dynamic bonding. In conclusion, the paper outlines current challenges and future research opportunities in this evolving field, offering valuable insights for prospective investigations.

Promoting the healing of infected diabetic wound by nanozyme-containing hydrogel with anti-bacterial inflammation suppressing, ROS-scavenging and oxygen-generating properties

Bacterial infections already pose a significant threat to skin wounds, especially in diabetic patients who have difficulty healing wounds. However, wound or bacterial infections are known to produce excess reactive oxygen species (ROS), and hypoxia may further hinder wound healing and the development of chronic wounds. In this study, a multifunctional hydrogel for ROS scavenging and bacterial inhibition was developed by cross-linking polyvinyl alcohol (PVA) and sodium alginate (SA) with graphene oxide (GO) loaded with silver-platinum hybrid nanoparticles (GO@Ag-Pt). The PVA/SA hydrogel loaded with GO@Ag-Pt exhibited the ability to scavenge different types of ROS, generate O2, and kill a broad spectrum of bacteria in vitro. The silver-platinum hybrid nanoparticles significantly increased the antibacterial ability against Escherichia coli and Staphylococcus aureus compared with silver nanoparticles (AgNps). GO@Ag-Pt loaded hydrogel was effective in treating infections caused by S.aureus, thereby significantly promoting wound healing during the inflammatory phase. Hydrogel therapy significantly reduced the level of ROS and alleviated inflammation levels. Notably, our ROS-scavenging, antibacterial hydrogels can be used to effectively treat various types of wounds, including difficult-to-heal diabetic wounds with bacterial infections. Thus, this study proposes an effective strategy for various chronic wound healing based on ROS clearance and bacteriostatic hydrogels.

Design of Cellulose Nanocrystal-Based Self-Healing Nanocomposite Hydrogels and Application in Motion Sensing and Sweat Detection

Hydrogels, as flexible materials, have been widely used in the field of flexible sensors. Human sweat contains a variety of biomarkers that can reflect the physiological state of the human body. Therefore, it is of great practical significance and application value to realize the detection of sweat composition and combine it with human motion sensing through a hydrogel. Based on mussel-inspired chemistry, polydopamine (PDA) and gold nanoparticles (AuNPs) were coated on the surface of cellulose nanocrystals (CNCs) to obtain CNC-based nanocomposites (CNCs@PDA-Au), which could simultaneously enhance the mechanical, electrochemical, and self-healing properties of hydrogels. The CNCs@PDA-Au was composited with poly(vinyl alcohol) (PVA) hydrogel to obtain the nanocomposite hydrogel (PVA/CNCs@PDA-Au) by freeze-thaw cycles. The PVA/CNCs@PDA-Au has excellent mechanical strength (7.2 MPa) and self-healing properties (88.3%). The motion sensors designed with PVA/CNCs@PDA-Au exhibited a fast response time (122.9 ms), wide strain sensing range (0-600.0%), excellent stability, and fatigue resistance. With the unique electrochemical redox properties of uric acid, the designed hydrogel sensor successfully realized the detection of uric acid in sweat with a wide detection range (1.0-100.0 μmol/L) and low detection limit (0.42 μmol/L). In this study, the dual detection of human motion and uric acid in sweat was successfully realized by the designed PVA/CNCs@PDA-Au nanocomposite hydrogel.

Recent Advances in Poly(vinyl alcohol)-Based Hydrogels

Poly(vinyl alcohol) (PVA) is a versatile synthetic polymer, used for the design of hydrogels, porous membranes and films. Its solubility in water, film- and hydrogel-forming capabilities, non-toxicity, crystallinity and excellent mechanical properties, chemical inertness and stability towards biological fluids, superior oxygen and gas barrier properties, good printability and availability (relatively low production cost) are the main aspects that make PVA suitable for a variety of applications, from biomedical and pharmaceutical uses to sensing devices, packaging materials or wastewater treatment. However, pure PVA materials present low stability in water, limited flexibility and poor biocompatibility and biodegradability, which restrict its use alone in various applications. PVA mixed with other synthetic polymers or biomolecules (polysaccharides, proteins, peptides, amino acids etc.), as well as with inorganic/organic compounds, generates a wide variety of materials in which PVA's shortcomings are considerably improved, and new functionalities are obtained. Also, PVA's chemical transformation brings new features and opens the door for new and unexpected uses. The present review is focused on recent advances in PVA-based hydrogels.

Fabrication, characterization and numerical validation of a novel thin-wall hydrogel vessel model for cardiovascular research based on a patient-specific stenotic carotid artery bifurcation

In vitro vascular models, primarily made of silicone, have been utilized for decades for studying hemodynamics and supporting the development of implants for catheter-based treatments of diseases such as stenoses and aneurysms. Hydrogels have emerged as prominent materials in tissue-engineering applications, offering distinct advantages over silicone models for fabricating vascular models owing to their viscoelasticity, low friction, and tunable mechanical properties. Our study evaluated the feasibility of fabricating thin-wall, anatomical vessel models made of polyvinyl alcohol hydrogel (PVA-H) based on a patient-specific carotid artery bifurcation using a combination of 3D printing and molding technologies. The model's geometry, elastic modulus, volumetric compliance, and diameter distensibility were characterized experimentally and numerically simulated. Moreover, a comparison with silicone models with the same anatomy was performed. A PVA-H vessel model was integrated into a mock circulatory loop for a preliminary ultrasound-based assessment of fluid dynamics. The vascular model's geometry was successfully replicated, and the elastic moduli amounted to 0.31 ± 0.007 MPa and 0.29 ± 0.007 MPa for PVA-H and silicone, respectively. Both materials exhibited nearly identical volumetric compliance (0.346 and 0.342% mmHg-1), which was higher compared to numerical simulation (0.248 and 0.290% mmHg-1). The diameter distensibility ranged from 0.09 to 0.20% mmHg-1 in the experiments and between 0.10 and 0.18% mmHg-1 in the numerical model at different positions along the vessel model, highlighting the influence of vessel geometry on local deformation. In conclusion, our study presents a method and provides insights into the manufacturing and mechanical characterization of hydrogel-based thin-wall vessel models, potentially allowing for a combination of fluid dynamics and tissue engineering studies in future cardio- and neurovascular research.

Multi-Layer PVA-PANI Conductive Hydrogel for Symmetrical Supercapacitors: Preparation and Characterization

This work describes a simple, inexpensive, and robust method to prepare a flexible "all in one" integrated hydrogel supercapacitors (HySCs). Preparing smart hydrogels with high electrical conductivity, ability to stretch significantly, and excellent mechanical properties is the last challenge for tailored wearable devices. In this paper, we employed a physical crosslinking process that involves consecutive freezing and thawing cycles to prepare a polyvinyl alcohol (PVA)-based hydrogel. Exploiting the self-healing properties of these materials, the assembly of the different layers of the HySCs has been performed. The ionic conductivity within the electrolyte layer arises from the inclusion of an H2SO4 solution in the hydrogel network. Instead, the electronic conductivity is facilitated by the addition of the conductive polymer PANI-PAMPSA into the hydrogel layers. Electrochemical measures have highlighted newsworthy properties related to our HySCs, opening their use in wearable electronic applications.

A review of starch/polyvinyl alcohol (PVA) blend film: A potential replacement for traditional plastic-based food packaging film

In recent years, the development of environmentally friendly packaging materials using biodegradable polymers has emerged as a key challenge for scientists and consumers in response to resource depletion and environmental issues caused by plastic packaging materials. Starch and polyvinyl alcohol (PVA) are being recognized as excellent candidates for producing biodegradable food packaging films. Polymer blending has emerged as a practical approach to overcome the limitations of biopolymer films by developing films with unique properties and enhancing overall performance. This review briefly introduces the molecular structure and properties of starch and PVA, summarizes the common preparation methods and properties of starch/PVA blend films, and focuses on different strategies used to enhance starch/PVA blend films, including nanoparticles, plant extracts, and cross-linking agents. Additionally, this study summarizes the application of starch/PVA blend films as active and smart packaging in food preservation systems. This study demonstrates that starch and PVA blends have potential in manufacturing biodegradable food films with excellent properties due to their excellent compatibility and intermolecular interactions, and can be used as packaging films for a variety of foods to extend their shelf life.

Eco-Friendly Production of Polyvinyl Alcohol/Carboxymethyl Cellulose Wound Healing Dressing Containing Sericin

Wound dressing production represents an important segment in the biomedical healthcare field, but finding a simple and eco-friendly method that combines a natural compound and a biocompatible dressing production for biomedical application is still a challenge. Therefore, the aim of this study is to develop wound healing dressings that are environmentally friendly, low cost, and easily produced, using natural agents and a physical crosslinking technique. Hydrogel wound healing dressings were prepared from polyvinyl alcohol/carboxymethyl cellulose and sericin using the freeze-thawing method as a crosslinking method. The morphological characterization was carried out by scanning electron microscopy (SEM), whereas the mechanical analysis was carried out by dynamic mechanical analysis (DMA) to test the tensile strength and compression properties. Then, the healing property of the wound dressing material was tested by in vitro and ex vivo tests. The results show a three-dimensional microporous structure with no cytotoxicity, excellent stretchability with compressive properties similar to those of human skin, and excellent healing properties. The proposed hydrogel dressing was tested in vitro with HaCaT keratinocytes and ex vivo with epidermal tissues, demonstrating an effective advantage on wound healing acceleration. Accordingly, this study was successful in developing wound healing dressings using natural agents and a simple and green crosslinking method.

One-Step Precise Characterization of Drug Delivery Systems by PULCON Magnetic Resonance Spectroscopy

Polymers are extensively used for the realization of drug delivery systems across multiple scales, from nanomedicines to microparticles and macroscopic implantable devices, for their favorable biodegradation profiles and tunable physicochemical features. The accurate quantification of the polymer content is key to finely controlling drug loading and release and ensuring reproducibility, yet it continues to be a major challenge in the design and development of delivery systems. In this study, we introduce a novel protocol based on the PULCON technique to quantify, with a routine NMR spectroscopy analysis, the precise concentration of polymers in various delivery systems. Specifically, the PULCON protocol is applied to characterize the physicochemical and pharmaceutical properties of nanoparticles, microparticles, and implantable devices realized by combining three extensively used polymers, namely, poly(lactic-co-glycolic acid) (PLGA), poly(vinyl alcohol) (PVA), and poly(ethylene glycol) (PEG). Without using internal calibration procedures, in a single step, the PULCON protocol precisely quantifies the concentration of each polymer and the drug content. This approach can be readily implemented on standard NMR spectrometers, enabling accurate characterization of drug delivery systems and facilitating their effective development.

Biological investigation of a novel nanocomposite based on xanthan gum-alginate hydrogel/PVA, incorporated with ZnMnFe2O4 nanoparticles

In light of the need to create new materials that are safe for use in biomedical applications like wound healing and tissue engineering, a unique nanocomposite was formulated and produced in the current investigation. A biocompatible hydrogel was created using natural polymers xanthan gum (XG) and alginate (Alg). In order to enhance the mechanical characteristics of the natural polymer-based hydrogels, polyvinyl alcohol (PVA) was added to the hydrogel matrix. Subsequently, the XG-Alg hydrogel/PVA structure was combined with ZnMnFe2O4 nanoparticles in order to augment the antibacterial efficacy of the biomaterial. The XG-Alg hydrogel/PVA/ZnMnFe2O4 nanocomposite was analyzed using XRD, EDX, FT-IR, TGA, and FE-SEM techniques to determine its properties. In addition, the mechanical properties of the pure hydrogel were compared to those of the XG-Alg hydrogel/PVA/ZnMnFe2O4 nanocomposite. The nanocomposite exhibited a biocompatibility of 96.45 % and 94.32 % with HEK293T cell lines after 24 h and 48 h of incubation, respectively, in biological evaluations. Furthermore, a significant antibacterial efficacy was demonstrated against both gram-positive S. aureus and gram-negative E. coli bacteria. The findings suggest that the developed XG-Alg hydrogel/PVA/ZnMnFe2O4 nanocomposite has promising qualities for use in biomedical fields, such as tissue engineering.

Eco-Friendly and Self-Sanitizing Microporous Cellulose Sponge (MCS)-Based Cooling Media for Mitigating Microbial Cross-Contamination in the Food Cold Chain

Maintaining precise temperature control is vital for cold chain food transport, as temperature fluctuations can cause significant food safety and quality issues. During transport, ice that melts can promote the growth of microbes and their spread, resulting in microbial cross-contamination. This study developed sustainable, non-melting, self-sanitizing "ice cubes" using food grade compositions including microporous cellulose sponges (MCS) and photosensitizers, aimed at enhancing temperature regulation and minimizing microbial contamination in the cold chain. Upon absorbing water, the MCS matched traditional ice in cooling efficiency and heat absorption and exhibit remarkable mechanical and thermal durability, withstanding multiple freeze-thaw cycles and compressive stresses. The cationic MCS combined with erythrosine B demonstrated strong self-sanitizing capabilities, effectively reducing microbial cross-contamination in food models. Additionally, the release rates of photosensitizers from the MCS can be modulated by altering environmental ionic strength. This research offers viable solutions to address microbial cross-contamination challenges in current cold chain systems.

Self-healing, antioxidant, and antibacterial Bletilla striata polysaccharide-tannic acid dual dynamic crosslinked hydrogels for tissue adhesion and rapid hemostasis

Biomaterials capable of achieving effective sealing and hemostasis at moist wounds are in high demand in the clinical management of acute hemorrhage. Bletilla striata polysaccharide (BSP), a natural polysaccharide renowned for its hemostatic properties, holds promising applications in biomedical fields. In this study, a dual-dynamic-bonds crosslinked hydrogel was synthesized via a facile one-pot method utilizing poly(vinyl alcohol) (PVA)-borax as a matrix system, followed by the incorporation of BSP and tannic acid (TA). Chemical borate ester bonds formed around borax, coupled with multiple physical hydrogen bonds between BSP and other components, enhanced the mechanical properties and rapid self-healing capabilities. The catechol moieties in TA endowed the hydrogel with excellent adhesive strength of 30.2 kPa on the surface of wet tissues and facilitated easy removal without residue. Benefiting from the synergistic effect of TA and the preservation of the intrinsic properties of BSP, the hydrogel exhibited outstanding biocompatibility, antibacterial, and antioxidant properties. Moreover, it effectively halted acute bleeding within 31.3 s, resulting in blood loss of 15.6 % of that of the untreated group. As a superior hemostatic adhesive, the hydrogel in this study is poised to offer a novel solution for addressing future acute hemorrhage, wound healing, and other biomedical applications.

Materials and Structural Designs toward Motion Artifact-Free Bioelectronics

Bioelectronics encompassing electronic components and circuits for accessing human information play a vital role in real-time and continuous monitoring of biophysiological signals of electrophysiology, mechanical physiology, and electrochemical physiology. However, mechanical noise, particularly motion artifacts, poses a significant challenge in accurately detecting and analyzing target signals. While software-based "postprocessing" methods and signal filtering techniques have been widely employed, challenges such as signal distortion, major requirement of accurate models for classification, power consumption, and data delay inevitably persist. This review presents an overview of noise reduction strategies in bioelectronics, focusing on reducing motion artifacts and improving the signal-to-noise ratio through hardware-based approaches such as "preprocessing". One of the main stress-avoiding strategies is reducing elastic mechanical energies applied to bioelectronics to prevent stress-induced motion artifacts. Various approaches including strain-compliance, strain-resistance, and stress-damping techniques using unique materials and structures have been explored. Future research should optimize materials and structure designs, establish stable processes and measurement methods, and develop techniques for selectively separating and processing overlapping noises. Ultimately, these advancements will contribute to the development of more reliable and effective bioelectronics for healthcare monitoring and diagnostics.

Filled Elastomers: Mechanistic and Physics-Driven Modeling and Applications as Smart Materials

Elastomers are made of chain-like molecules to form networks that can sustain large deformation. Rubbers are thermosetting elastomers that are obtained from irreversible curing reactions. Curing reactions create permanent bonds between the molecular chains. On the other hand, thermoplastic elastomers do not need curing reactions. Incorporation of appropriated filler particles, as has been practiced for decades, can significantly enhance mechanical properties of elastomers. However, there are fundamental questions about polymer matrix composites (PMCs) that still elude complete understanding. This is because the macroscopic properties of PMCs depend not only on the overall volume fraction (ϕ) of the filler particles, but also on their spatial distribution (i.e., primary, secondary, and tertiary structure). This work aims at reviewing how the mechanical properties of PMCs are related to the microstructure of filler particles and to the interaction between filler particles and polymer matrices. Overall, soft rubbery matrices dictate the elasticity/hyperelasticity of the PMCs while the reinforcement involves polymer-particle interactions that can significantly influence the mechanical properties of the polymer matrix interface. For ϕ values higher than a threshold, percolation of the filler particles can lead to significant reinforcement. While viscoelastic behavior may be attributed to the soft rubbery component, inelastic behaviors like the Mullins and Payne effects are highly correlated to the microstructures of the polymer matrix and the filler particles, as well as that of the polymer-particle interface. Additionally, the incorporation of specific filler particles within intelligently designed polymer systems has been shown to yield a variety of functional and responsive materials, commonly termed smart materials. We review three types of smart PMCs, i.e., magnetoelastic (M-), shape-memory (SM-), and self-healing (SH-) PMCs, and discuss the constitutive models for these smart materials.

Antibacterial and self-healing sepiolite-based hybrid hydrogel for hemostasis and wound healing

The process of wound healing necessitates a specific environment, thus prompting extensive research into the utilization of hydrogels for this purpose. While numerous hydrogel structures have been investigated, the discovery of a self-healing hydrogel possessing favorable biocompatibility, exceptional mechanical properties, and effective hemostatic and antibacterial performance remains uncommon. In this work, a polyvinyl alcohol (PVA) hybrid hydrogel was meticulously designed through a simple reaction, wherein CuxO anchored sepiolite was incorporated into the hydrogel. The results indicate that introduction of sepiolite greatly improves the toughness, self-healing and adhesion properties of the PVA hydrogels. CuxO nanoparticles endow the hydrogels with excellent antibacterial performance towards Staphylococcus aureus and Escherichia coli. The application of hybrid hydrogels for fast hemostasis and wound healing are verified in vitro and in vivo with rat experiments. This work thereby demonstrates an effective strategy for designing biodegradable hemostatic and wound healing materials.

Antimicrobial polysaccharide hydrogels embedded with methyl-β-cyclodextrin/thyme oil inclusion complexes for exceptional mechanical performance and chilled chicken breast preservation

While hydrogels have potential for food packaging, limited research on hydrogels with excellent mechanical performance and antibacterial activity for preserving chicken breasts. Herein, we created antibacterial hydrogels by embedding methyl-β-cyclodextrin/thyme oil inclusion complexes (MCD/TO-ICs) into a polyvinyl alcohol matrix containing dendrobium polysaccharides and guar gum in varying ratios using freeze-thaw cycling method. The resulting hydrogels exhibited a more compact structure than those without MCD/TO-ICs, enhancing thermal stability and increasing glass transition temperature due to additional intermolecular interactions between polymer chains that inhibited chain movement. XRD analysis showed no significant changes in crystalline phase, enabling formation of a 3D network through abundant hydrogen bonding. Moreover, the hydrogel demonstrated exceptional durability, with a toughness of 350 ± 25 kJ/m3 and adequate tearing resistance of 340 ± 30 J/m2, capable of lifting 3 kg weight, 1200 times greater than the hydrogel itself. Additionally, the hydrogels displayed excellent antimicrobial activity and antioxidant properties. Importantly, the hydrogels effectively maintained TVB-N levels and microbial counts within acceptable ranges, preserving sensory properties and extending the shelf life of chilled chicken breasts by four days. This study highlights the potential of MCD/TO-IC-incorporated polysaccharide hydrogels as safe and effective active packaging solutions for preserving chilled chicken in food industry.

Development of a tannic acid- and silicate ion-functionalized PVA-starch composite hydrogel for in situ skeletal muscle repairing

The repair capacity of skeletal muscle is severely diminished in massive skeletal muscle injuries accompanied by inflammation, resulting in muscle function loss and scar tissue formation. In the current work, we developed a tannic acid (TA)- and silicate ion-functionalized tissue adhesive poly(vinyl alcohol) (PVA)-starch composite hydrogel, referred to as PSTS (PVA-starch-TA-SiO32-). It was formed based on the hydrogen bonding of TA to organic polymers, as well as silicate-TA ligand interaction. PSTS could be gelatinized in minutes at room temperature with crosslinked network formation, making it applicable for injection. Further investigations revealed that PSTS had skeletal muscle-comparable conductivity and modulus to act as a temporary platform for muscle repairing. Moreover, PSTS could release TA and silicate ions in situ to inhibit bacterial growth, induce vascularization, and reduce oxidation, paving the way to the possibility of creating a favorable microenvironment for skeletal muscle regeneration and tissue fibrosis control. The in vivo model confirmed that PSTS could enhance muscle fiber regeneration and myotube formation, as well as reduce infection and inflammation risk. These findings thereby implied the great potential of PSTS in the treatment of formidable skeletal muscle injuries.

Comparative Analysis of Crosslinking Methods and Their Impact on the Physicochemical Properties of SA/PVA Hydrogels

Hydrogels, versatile materials used in various applications such as medicine, possess properties crucial for their specific applications, significantly influenced by their preparation methods. This study synthesized 18 different types of hydrogels using sodium alginate (SA) and two molecular weights of polyvinyl alcohol (PVA). Crosslinking agents such as aqueous solutions of calcium (Ca2+) and copper (Cu2+) ions and solutions of these ions in boric acid were utilized. The hydrogels were subjected to compression strength tests and drying kinetics analysis. Additionally, six hydrogel variants containing larger PVA particles underwent Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) post-drying. Some samples were lyophilized, and their surface morphology was examined using scanning electron microscopy (SEM). The results indicate that the choice of crosslinking method significantly impacts the physicochemical properties of the hydrogels. Crosslinking in solutions with higher concentrations of crosslinking ions enhanced mechanical properties and thermal stability. Conversely, using copper ions instead of calcium resulted in slower drying kinetics and reduced thermal stability. Notably, employing boric acid as a crosslinking agent for hydrogels containing heavier PVA molecules led to considerable improvements in mechanical properties and thermal stability.