1
|
Maher C, Chen Z, Zhou Y, You J, Sutton G, Wallace G. Innervation in corneal bioengineering. Acta Biomater 2024:S1742-7061(24)00592-0. [PMID: 39393658 DOI: 10.1016/j.actbio.2024.10.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2024] [Revised: 09/24/2024] [Accepted: 10/06/2024] [Indexed: 10/13/2024]
Abstract
Given the crucial role nerves play in maintaining corneal function and integrity, the ability of bioengineered cornea to demonstrate functional nerve regeneration directly influences their longevity and stability. Despite advances in biofabrication techniques and an increasing appreciation of the importance of neural innervation, to this day none have completely replicated the complexity and functionality of the cornea with successful innervation. This review evaluates the materials and fabrication techniques used to produce and enhance innervation in bioengineered cornea. Approaches to facilitating innervation are discussed and methods of assessing innervation compared. Finally, current challenges and future directions for innervated bioengineered cornea are presented, providing guidance for future work. STATEMENT OF SIGNIFICANCE: The functional nerve regeneration in bioengineered corneas directly influences their longevity and stability. Despite advancements in biofabrication techniques and growing recognition of the importance of neural innervation for bioengineered cornea, there remains a lack of comprehensive reviews on this topic. This review addresses the critical gap by evaluating the materials and fabrication techniques employed to promote innervation in bioengineered corneas. Additionally, we discuss various approaches to enhancing innervation, compare assessment methods, and examine both in vitro and in vivo responses. By providing a comprehensive overview of the current state of research and highlighting challenges and future directions, this review aims to provide guidance for inducing innervation of bioengineered cornea.
Collapse
Affiliation(s)
- Clare Maher
- Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia; School of Medicine, University of Notre Dame, Sydney, NSW, Australia
| | - Zhi Chen
- Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia.
| | - Ying Zhou
- Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| | - Jingjing You
- Save Sight Institute, University of Sydney, Sydney, New South Wales 2000, Australia
| | - Gerard Sutton
- Save Sight Institute, University of Sydney, Sydney, New South Wales 2000, Australia; Lions New South Wales Eye Bank and New South Wales Bone Bank, New South Wales Organ and Tissue Donation Service, GPO Box 1614, Sydney, New South Wales 2000, Australia; Sydney Medical School, University of Sydney, Sydney, New South Wales 2006, Australia
| | - Gordon Wallace
- Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia.
| |
Collapse
|
2
|
Deng Y, Li L, Xu J, Yao Y, Ding J, Wang L, Luo C, Yang W, Li L. A biomimetic human disease model of bacterial keratitis using a cornea-on-a-chip system. Biomater Sci 2024; 12:5239-5252. [PMID: 39233608 DOI: 10.1039/d4bm00833b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/06/2024]
Abstract
Bacterial keratitis is a common form of inflammation caused by the bacterial invasion of the corneal stroma after trauma. In extreme cases, it can lead to severe visual impairment or even blindness; therefore, timely medical intervention is imperative. Unfortunately, widespread misuse of antibiotics has led to the development of drug resistance. In recent years, organ-on-chips that integrate multiple cell co-cultures have extensive applications in fundamental research and drug screening. In this study, immortalized human corneal epithelial cells and primary human corneal fibroblasts were co-cultured on a porous polydimethylsiloxane membrane to create a cornea-on-a-chip model. The developed multilayer epithelium closely mimicked clinical conditions, demonstrating high structural resemblance and repeatability. By introducing a consistently defective epithelium and bacterial infection using the space-occupying method, we successfully established an in vitro model of bacterial keratitis using S. aureus. We validate this model by evaluating the efficacy of antibiotics, such as levofloxacin, tobramycin, and chloramphenicol, through simultaneously observing the reactions of bacteria and the two cell types to these antibiotics. Our study has revealed the barrier function of epithelium of the model and differentiated efficacy of three drugs in terms of bactericidal activity, reducing cellular apoptosis, and mitigating scar formation. Altogether, the cornea on chip enables the assessment of ocular antibiotics, distinguishing the impact on corneal cells and structural integrity. This study introduced a biomimetic in vitro disease model to evaluate drug efficacy and provided significant insights into the extensive effects of antibiotics on diverse cell populations within the cornea.
Collapse
Affiliation(s)
- Yudan Deng
- School of Ophthalmology & Optometry, Eye Hospital, School of Biomedical Engineering, Wenzhou Medical University, Wenzhou, Zhejiang, China.
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Lingjun Li
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
- Wenzhou Key Laboratory of Biomedical Imaging, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China
| | - Jian Xu
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Yili Yao
- School of Ophthalmology & Optometry, Eye Hospital, School of Biomedical Engineering, Wenzhou Medical University, Wenzhou, Zhejiang, China.
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Jiangtao Ding
- School of Ophthalmology & Optometry, Eye Hospital, School of Biomedical Engineering, Wenzhou Medical University, Wenzhou, Zhejiang, China.
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Lei Wang
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Chunxiong Luo
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
- Center for Quantitative Biology, Academy for Advanced Interdisciplinary Studies, Peking University, Beijing, China
- The State Key Laboratory for Artificial Microstructures and Mesoscopic Physics, School of Physics, Peking University, Beijing, China
| | - Wei Yang
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
| | - Lingli Li
- School of Ophthalmology & Optometry, Eye Hospital, School of Biomedical Engineering, Wenzhou Medical University, Wenzhou, Zhejiang, China.
- Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China.
- Zhejiang Engineering Research Center for Tissue Repair Materials, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang, China
| |
Collapse
|
3
|
Kiristioglu MO, Baykara M, Yavas O, Kupeli ZA, Ozyigit MO. The effect of platelet-rich plasma and sodium alginate hydrogel on corneal wound healing after corneal alkali burns in rats with computer-assisted anterior segment optical coherence tomography image analysis. Exp Eye Res 2024; 247:110044. [PMID: 39151772 DOI: 10.1016/j.exer.2024.110044] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2024] [Revised: 05/27/2024] [Accepted: 08/13/2024] [Indexed: 08/19/2024]
Abstract
Our objective was to determine the effect of a semi-synthetic sodium alginate hydrogel and its combination with platelet-rich plasma (PRP) on histopathological, biochemical, clinical, and anterior segment optical coherence tomography (AS-OCT) data. Alkali chemical burn of the cornea was induced. Injured rats were randomly divided into five equal groups and topically treated with phosphate-buffered saline (sham), platelet-rich plasma (PRP), 0.5% sodium citrate, a semi-synthetic sodium alginate hydrogel, or a combination of PRP and hydrogel (combined group) three times daily. The degree of corneal opacity (CO), corneal epithelial staining (CES), percentage of corneal epithelial defects (CEDP), degree of ciliary hyperemia (CH), neovascularization size (NVS), and extent of neovascularization (NVE) were evaluated. AS-OCT was performed at nine days, and then rats were sacrificed. Histological examination and enzyme-linked immunosorbent assays were performed to detect the concentrations of IL-1β and MMP-9 in the cornea. There were no significant differences between the groups regarding CEDP, CO, CES, CH, NVS, or NVE on the first day after corneal alkali burn injury (p > 0,05). At the last examination, CO was significantly lower in the PRP group than in the sham group (p = 0,044), while the CO concentrations were similar in terms of NVS (p > 0,05). Similarly, in terms of tissue MMP-9 levels, there were no significant differences between groups (p > 0,05). However, there was a significant difference in tissue IL-1β levels between the groups (p < 0,001). In the PRP and combined groups, the level of IL-1β was significantly lower than that in the sham group (p = 0,043 and p = 0,036, respectively). There was a significant difference in epithelial necrosis between the PRP, and it was the lowest in the combined group (p = 0,003). Epithelial thickness was highest in the combined group (p = 0,002). CEDP was significantly different at the last visit between the groups (p = 0.042). The fastest epithelial closing rate was observed for the combined group (p = 0,026). There was a significant negative correlation between tissue MMP-9 levels and corneal solidity and between tissue MMP-9 levels and the corneal area according to the AS-OCT measurements (p = 0,012 and p = 0,027, respectively). When used alone, topical hydrogel application did not significantly enhance the healing of corneal wounds. However, when combined with PRP, it leads to an increased rate of epithelial closure and neovascularization. This combination did not exacerbate inflammation or corneal opacity compared to PRP alone. The anticoagulant citrate solution in the PRP tube did not prove effective. The synergistic use of PRP and hydrogel could enhance epithelial thickness and reduce epithelial necrosis. The use of new parameters for corneal wound healing assessment was facilitated through AS-OCT image processing.
Collapse
Affiliation(s)
| | - Mehmet Baykara
- Department of Ophthalmology, Bursa Uludag University Faculty of Medicine, Bursa, Turkey
| | - Ozkan Yavas
- Department of Veterinary Pathology, Bursa Uludag University Faculty of Veterinary Medicine, Bursa, Turkey
| | - Zehra Avci Kupeli
- Department of Veterinary Pathology, Bursa Uludag University Faculty of Veterinary Medicine, Bursa, Turkey
| | - Musa Ozgur Ozyigit
- Department of Veterinary Pathology, Bursa Uludag University Faculty of Veterinary Medicine, Bursa, Turkey
| |
Collapse
|
4
|
Chen PH, Chen IH, Kao WH, Wu SY, Tsai WB. Characterization and application of photocrosslinkable collagen maleate as bioink in extrusion-based 3D bioprinting. Biomater Sci 2024; 12:5063-5075. [PMID: 39212588 DOI: 10.1039/d4bm00826j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/04/2024]
Abstract
3D bioprinting, a significant advancement in biofabrication, is renowned for its precision in creating tissue constructs. Collagen, despite being a gold standard biomaterial, faces challenges in bioink formulations due to its unique physicochemical properties. This study introduces a novel, neutral-soluble, photocrosslinkable collagen maleate (ColME) that is ideal for 3D bioprinting. ColME was synthesized by chemically modifying bovine type I collagen with maleic anhydride, achieving a high substitution ratio that shifted the isoelectric point to enhance solubility in physiological pH environments. This modification was confirmed to preserve the collagen's triple-helix structure substantially. Bioprinting parameters for ColME were optimized, focusing on adjustments to the bioink concentration, extrusion pressure, nozzle speed, and temperature. Results demonstrated that lower temperatures and smaller nozzle sizes substantially improved the print quality of grid structures. Additionally, the application of intermittent photo-crosslinking facilitated the development of structurally robust 3D multilayered constructs, enabling the stable fabrication of complex tissues. Cell viability assays showed that encapsulated cells within the ColME matrix maintained high viability after printing. When compared to methacrylated gelatin, ColME exhibited superior mechanical strength, resistance to enzymatic digestion, and overall printability, positioning it as an outstanding bioink for the creation of durable, bioactive 3D tissues.
Collapse
Affiliation(s)
- Po-Hsun Chen
- Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan.
| | - I-Hsiang Chen
- Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan.
| | - Wei-Hsiang Kao
- Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan.
| | - Song-Yi Wu
- Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan.
- Program of Green Materials and Precision Devices, School of Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan
- Guangdong Victory Co., Ltd., 4F., A11, Guangdong New Light Source Industrial Park, Luocun, Shishan Town, Nanhai District, Foshan City 528226, China
- Guangxi Shenguan Collagen Biological Group Company Limited, No. 39 Xijiang 4th Rd., Wuzhou, China
| | - Wei-Bor Tsai
- Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan.
- Program of Green Materials and Precision Devices, School of Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 106, Taiwan
| |
Collapse
|
5
|
Bosch BM, Delgado LM, Rodríguez-González R, Perez RA. The time dependent influence of curvature and topography of biomaterials in the behavior of corneal endothelial cells. Front Bioeng Biotechnol 2024; 12:1454675. [PMID: 39386038 PMCID: PMC11461339 DOI: 10.3389/fbioe.2024.1454675] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2024] [Accepted: 09/18/2024] [Indexed: 10/12/2024] Open
Abstract
Among the different layers of the cornea, the corneal endothelium, which is composed of corneal endothelial cells (CEC), plays a key role in the maintenance of cornea transparency. Based on the donor shortages and the limitations associated with transplantation, in this work we have developed collagen hydrogels with different patterned structures on the surface to provide topographies in ranges similar to the natural environment that CEC sense. This aimed at stimulating cells to maintain a typical CEC phenotype and provide alternatives to corneal transplantation. In this sense, we have elaborated curved collagen hydrogels (concave and convex) with three different topographies (50, 200 and 300 µm grooves), with the help of 3D printed mold and replicating the mold with the collagen hydrogel, onto which CEC were cultured in order to analyze its behavior. Flat hydrogels were used as controls. Cell morphology, cell circularity and gene expression of ATP1A1 and ZO-1 genes were analyzed after 3 and 6 days. Results showed an effect of the curvature and the topography compared to flat collagen hydrogels, showing higher expression of ZO-1 and ATP1A1 in curved non-patterned hydrogels at day 3. The patterned hydrogels did not have such a significant effect on gene expression compared to flat hydrogels, showing stronger effect of the curvature compared to the topography. The effect was opposite at day 6, showing higher gene expression at days 6 on the patterned hydrogels, especially for the ZO-1 gene. The gene expression results were in accordance with the cell morphology observed at the different time points, showing circularities closer to hexagon like morphology at shorter time points. Overall, this platform can serve as a system to culture cell under proper environment to further be able to transplant a CEC monolayer or to allow transplantation of thin collagen layers with cultured CEC.
Collapse
Affiliation(s)
- Begoña M. Bosch
- Bioengineering Institute of Technology, Universitat Internacional de Catalunya, Barcelona, Spain
- Bioengineering Department, Universitat Internacional de Catalunya, Barcelona, Spain
| | - Luis M. Delgado
- Bioengineering Institute of Technology, Universitat Internacional de Catalunya, Barcelona, Spain
- Bioengineering Department, Universitat Internacional de Catalunya, Barcelona, Spain
| | - Raquel Rodríguez-González
- Bioengineering Institute of Technology, Universitat Internacional de Catalunya, Barcelona, Spain
- Bioengineering Department, Universitat Internacional de Catalunya, Barcelona, Spain
| | - Roman A. Perez
- Bioengineering Institute of Technology, Universitat Internacional de Catalunya, Barcelona, Spain
- Bioengineering Department, Universitat Internacional de Catalunya, Barcelona, Spain
| |
Collapse
|
6
|
Gómez-Fernández H, Alhakim-Khalak F, Ruiz-Alonso S, Díaz A, Tamayo J, Ramalingam M, Larra E, Pedraz JL. Comprehensive review of the state-of-the-art in corneal 3D bioprinting, including regulatory aspects. Int J Pharm 2024; 662:124510. [PMID: 39053675 DOI: 10.1016/j.ijpharm.2024.124510] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2024] [Revised: 07/12/2024] [Accepted: 07/21/2024] [Indexed: 07/27/2024]
Abstract
The global shortage of corneal transplants has spurred an urgency in the quest for efficient treatments. This systematic review not only provides a concise overview of the current landscape of corneal morphology, physiology, diseases, and conventional treatments but crucially delves into the forefront of tissue engineering for corneal regeneration. Emphasizing cellular and acellular components, bioprinting techniques, and pertinent biological assays, it explores optimization strategies for manufacturing and cost-effectiveness. To bridge the gap between research and industrial production, the review outlines the essential regulatory strategy required in Europe, encompassing relevant directives, frameworks, and governing bodies. This comprehensive regulatory framework spans the entire process, from procuring initial components to marketing and subsequent product surveillance. In a pivotal shift towards the future, the review culminates by highlighting the latest advancements in this sector, particularly the integration of tissue therapy with artificial intelligence. This synergy promises substantial optimization of the overall process, paving the way for unprecedented breakthroughs in corneal regeneration. In essence, this review not only elucidates the current state of corneal treatments and tissue engineering but also outlines regulatory pathways and anticipates the transformative impact of artificial intelligence, providing a comprehensive guide for researchers, practitioners, and policymakers in the field.
Collapse
Affiliation(s)
- Hodei Gómez-Fernández
- NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology. Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; AJL Ophthalmic, Ferdinand Zeppelin Kalea, 01510 Vitoria-Gasteiz, Spain.
| | - Fouad Alhakim-Khalak
- NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology. Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, 01009 Vitoria-Gasteiz, Spain; Networking Research Centre of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Institute of Health Carlos III, 28029 Madrid, Spain.
| | - Sandra Ruiz-Alonso
- NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology. Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, 01009 Vitoria-Gasteiz, Spain; Networking Research Centre of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Institute of Health Carlos III, 28029 Madrid, Spain.
| | - Aitor Díaz
- AJL Ophthalmic, Ferdinand Zeppelin Kalea, 01510 Vitoria-Gasteiz, Spain.
| | - Julen Tamayo
- AJL Ophthalmic, Ferdinand Zeppelin Kalea, 01510 Vitoria-Gasteiz, Spain.
| | - Murugam Ramalingam
- NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology. Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, 01009 Vitoria-Gasteiz, Spain; Networking Research Centre of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Institute of Health Carlos III, 28029 Madrid, Spain; Joint Research Laboratory (JRL) on Bioprinting and Advanced Pharma Development, A Joined Venture of TECNALIA, Centro de investigación Lascaray Ikergunea, Avenida Miguel de Unamuno, 01006 Vitoria-Gasteiz, Spain.
| | - Eva Larra
- AJL Ophthalmic, Ferdinand Zeppelin Kalea, 01510 Vitoria-Gasteiz, Spain.
| | - José L Pedraz
- NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology. Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, 01009 Vitoria-Gasteiz, Spain; Networking Research Centre of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Institute of Health Carlos III, 28029 Madrid, Spain; Joint Research Laboratory (JRL) on Bioprinting and Advanced Pharma Development, A Joined Venture of TECNALIA, Centro de investigación Lascaray Ikergunea, Avenida Miguel de Unamuno, 01006 Vitoria-Gasteiz, Spain.
| |
Collapse
|
7
|
Palladino S, Copes F, Chevallier P, Candiani G, Mantovani D. Enabling 3D bioprinting of cell-laden pure collagen scaffolds via tannic acid supporting bath. Front Bioeng Biotechnol 2024; 12:1434435. [PMID: 39295849 PMCID: PMC11408190 DOI: 10.3389/fbioe.2024.1434435] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2024] [Accepted: 08/22/2024] [Indexed: 09/21/2024] Open
Abstract
The fabrication of cell-laden biomimetic scaffolds represents a pillar of tissue engineering and regenerative medicine (TERM) strategies, and collagen is the gold standard matrix for cells to be. In the recent years, extrusion 3D bioprinting introduced new possibilities to increase collagen scaffold performances thanks to the precision, reproducibility, and spatial control. However, the design of pure collagen bioinks represents a challenge, due to the low storage modulus and the long gelation time, which strongly impede the extrusion of a collagen filament and the retention of the desired shape post-printing. In this study, the tannic acid-mediated crosslinking of the outer layer of collagen is proposed as strategy to enable collagen filament extrusion. For this purpose, a tannic acid solution has been used as supporting bath to act exclusively as external crosslinker during the printing process, while allowing the pH- and temperature-driven formation of collagen fibers within the core. Collagen hydrogels (concentration 2-6 mg/mL) were extruded in tannic acid solutions (concentration 5-20 mg/mL). Results proved that external interaction of collagen with tannic acid during 3D printing enables filament extrusion without affecting the bulk properties of the scaffold. The temporary collagen-tannic acid interaction resulted in the formation of a membrane-like external layer that protected the core, where collagen could freely arrange in fibers. The precision of the printed shapes was affected by both tannic acid concentration and needle diameter and can thus be tuned. Altogether, results shown in this study proved that tannic acid bath enables collagen bioprinting, preserves collagen morphology, and allows the manufacture of a cell-laden pure collagen scaffold.
Collapse
Affiliation(s)
- Sara Palladino
- Laboratory for Biomaterials and Bioengineering, CRC-Tier I, Department of Mining, Metallurgy and Materials Engineering and Regenerative Medicine CHU de Québec, Laval University, Quebec City, QC, Canada
- GenT_LΛB, Department of Chemistry, Materials and Chemical Engineering 'G. Natta', Politecnico di Milano, Milan, Italy
| | - Francesco Copes
- Laboratory for Biomaterials and Bioengineering, CRC-Tier I, Department of Mining, Metallurgy and Materials Engineering and Regenerative Medicine CHU de Québec, Laval University, Quebec City, QC, Canada
| | - Pascale Chevallier
- Laboratory for Biomaterials and Bioengineering, CRC-Tier I, Department of Mining, Metallurgy and Materials Engineering and Regenerative Medicine CHU de Québec, Laval University, Quebec City, QC, Canada
| | - Gabriele Candiani
- GenT_LΛB, Department of Chemistry, Materials and Chemical Engineering 'G. Natta', Politecnico di Milano, Milan, Italy
| | - Diego Mantovani
- Laboratory for Biomaterials and Bioengineering, CRC-Tier I, Department of Mining, Metallurgy and Materials Engineering and Regenerative Medicine CHU de Québec, Laval University, Quebec City, QC, Canada
| |
Collapse
|
8
|
Suanno G, Genna VG, Maurizi E, Dieh AA, Griffith M, Ferrari G. Cell therapy in the cornea: The emerging role of microenvironment. Prog Retin Eye Res 2024; 102:101275. [PMID: 38797320 DOI: 10.1016/j.preteyeres.2024.101275] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 05/22/2024] [Accepted: 05/23/2024] [Indexed: 05/29/2024]
Abstract
The cornea is an ideal testing field for cell therapies. Its highly ordered structure, where specific cell populations are sequestered in different layers, together with its accessibility, has allowed the development of the first stem cell-based therapy approved by the European Medicine Agency. Today, different techniques have been proposed for autologous and allogeneic limbal and non-limbal cell transplantation. Cell replacement has also been attempted in cases of endothelial cell decompensation as it occurs in Fuchs dystrophy: injection of cultivated allogeneic endothelial cells is now in advanced phases of clinical development. Recently, stromal substitutes have been developed with excellent integration capability and transparency. Finally, cell-derived products, such as exosomes obtained from different sources, have been investigated for the treatment of severe corneal diseases with encouraging results. Optimization of the success rate of cell therapies obviously requires high-quality cultured cells/products, but the role of the surrounding microenvironment is equally important to allow engraftment of transplanted cells, to preserve their functions and, ultimately, lead to restoration of tissue integrity and transparency of the cornea.
Collapse
Affiliation(s)
- Giuseppe Suanno
- Vita-Salute San Raffaele University, Milan, Italy; Eye Repair Unit, Division of Neuroscience, IRCCS San Raffaele Scientific Institute, Milan, Italy
| | | | - Eleonora Maurizi
- Centre for Regenerative Medicine ''S. Ferrari'', University of Modena and Reggio Emilia, Modena, Italy
| | - Anas Abu Dieh
- Maisonneuve-Rosemont Hospital Research Centre, Montreal, Quebec, Canada
| | - May Griffith
- Maisonneuve-Rosemont Hospital Research Centre, Montreal, Quebec, Canada.
| | - Giulio Ferrari
- Vita-Salute San Raffaele University, Milan, Italy; Eye Repair Unit, Division of Neuroscience, IRCCS San Raffaele Scientific Institute, Milan, Italy; Ophthalmology Unit, IRCCS San Raffaele Scientific Institute, Milan, Italy.
| |
Collapse
|
9
|
Cheng KKW, Fingerhut L, Duncan S, Prajna NV, Rossi AG, Mills B. In vitro and ex vivo models of microbial keratitis: Present and future. Prog Retin Eye Res 2024; 102:101287. [PMID: 39004166 DOI: 10.1016/j.preteyeres.2024.101287] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2024] [Revised: 07/09/2024] [Accepted: 07/10/2024] [Indexed: 07/16/2024]
Abstract
Microbial keratitis (MK) is an infection of the cornea, caused by bacteria, fungi, parasites, or viruses. MK leads to significant morbidity, being the fifth leading cause of blindness worldwide. There is an urgent requirement to better understand pathogenesis in order to develop novel diagnostic and therapeutic approaches to improve patient outcomes. Many in vitro, ex vivo and in vivo MK models have been developed and implemented to meet this aim. Here, we present current in vitro and ex vivo MK model systems, examining their varied design, outputs, reporting standards, and strengths and limitations. Major limitations include their relative simplicity and the perceived inability to study the immune response in these MK models, an aspect widely accepted to play a significant role in MK pathogenesis. Consequently, there remains a dependence on in vivo models to study this aspect of MK. However, looking to the future, we draw from the broader field of corneal disease modelling, which utilises, for example, three-dimensional co-culture models and dynamic environments observed in bioreactors and organ-on-a-chip scenarios. These remain unexplored in MK research, but incorporation of these approaches will offer further advances in the field of MK corneal modelling, in particular with the focus of incorporation of immune components which we anticipate will better recapitulate pathogenesis and yield novel findings, therefore contributing to the enhancement of MK outcomes.
Collapse
Affiliation(s)
- Kelvin Kah Wai Cheng
- Centre for Inflammation Research, Institute of Regeneration and Repair, University of Edinburgh, United Kingdom
| | - Leonie Fingerhut
- Centre for Inflammation Research, Institute of Regeneration and Repair, University of Edinburgh, United Kingdom
| | - Sheelagh Duncan
- Centre for Inflammation Research, Institute of Regeneration and Repair, University of Edinburgh, United Kingdom
| | - N Venkatesh Prajna
- Department of Cornea and Refractive Surgery Services, Aravind Eye Hospital and Postgraduate Institute of Ophthalmology, Madurai, Tamil Nadu, India
| | - Adriano G Rossi
- Centre for Inflammation Research, Institute of Regeneration and Repair, University of Edinburgh, United Kingdom
| | - Bethany Mills
- Centre for Inflammation Research, Institute of Regeneration and Repair, University of Edinburgh, United Kingdom.
| |
Collapse
|
10
|
Vijayaraghavan R, Loganathan S, Valapa RB. Fabrication of GelMA - Agarose Based 3D Bioprinted Photocurable Hydrogel with In Vitro Cytocompatibility and Cells Mirroring Natural Keratocytes for Corneal Stromal Regeneration. Macromol Biosci 2024:e2400136. [PMID: 39096155 DOI: 10.1002/mabi.202400136] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2024] [Revised: 06/26/2024] [Indexed: 08/05/2024]
Abstract
The complex anatomy of the cornea and the subsequent keratocyte-fibroblast transition have always made corneal stromal regeneration difficult. Recently, 3D printing has received considerable attention in terms of fabrication of scaffolds with precise dimension and pattern. In the current work, 3D printable polymer hydrogels made of GelMA/agarose are formulated and its rheological properties are evaluated. Despite the variation in agarose content, both the hydrogels exhibited G'>G'' modulus. A prototype for 3D stromal model is created using Solid Works software, mimicking the anatomy of an adult cornea. The fabrication of 3D-printed hydrogels is performed using pneumatic extrusion. The FTIR analysis speculated that the hydrogel is well crosslinked and established strong hydrogen bonding with each other, thus contributing to improved thermal and structural stability. The MTT analysis revealed a higher rate of cell proliferation on the hydrogels. The optical analysis carried out on the 14th day of incubation revealed that the hydrogels exhibit transparency matching with natural corneal stromal tissue. Specific protein marker expression confirmed the keratocyte phenotype and showed that the cells do not undergo terminal differentiation into stromal fibroblasts. The findings of this work point to the potential of GelMA/A hydrogels as a novel biomaterial for corneal stromal tissue engineering.
Collapse
Affiliation(s)
- Renuka Vijayaraghavan
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi, Tamil Nadu, 630003, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| | - Sravanthi Loganathan
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi, Tamil Nadu, 630003, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| | - Ravi Babu Valapa
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi, Tamil Nadu, 630003, India
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, 201002, India
| |
Collapse
|
11
|
Barjuei ES, Shin J, Kim K, Lee J. Precision improvement of robotic bioprinting via vision-based tool path compensation. Sci Rep 2024; 14:17764. [PMID: 39085375 PMCID: PMC11291724 DOI: 10.1038/s41598-024-68597-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Accepted: 07/25/2024] [Indexed: 08/02/2024] Open
Abstract
Robotic 3D bioprinting is a rapidly advancing technology with applications in organ fabrication, tissue restoration, and pharmaceutical testing. While the stepwise generation of organs characterizes bioprinting, challenges such as non-linear material behavior, layer shifting, and trajectory tracking are common in freeform reversible embedding of suspended hydrogels (FRESH) bioprinting, leading to imperfections in complex organ construction. To overcome these limitations, we propose a computer vision-based strategy to identify discrepancies between printed filaments and the reference robot path. Employing error compensation techniques, we generate an adjusted reference path, enhancing robotic 3D bioprinting by adapting the robot path based on vision system data. Experimental assessments confirm the reliability and agility of our vision-based robotic 3D bioprinting approach, showcasing precision in fabricating human blood vessel segments through case studies. Significantly, it minimizes the printing layer width disparity to just 0.15 mm compared to the 0.6 mm in traditional methods, and it decreases the average error for curved filaments to 7.0 mm2 from the previous 12.7 mm2 in conventional printing. While these results underscore the significant potential of our innovation in creating precise biomimetic constructs, further investigation is necessary to tackle challenges such as accurately distinguishing closely stacked layers using a vision system, especially under varying lighting conditions. These limitations, coupled with issues of computational complexity and scalability in larger-scale bioprinting, emphasize the importance of enhancing the reliability of the vision-based approach across various conditions. Nonetheless, our innovation demonstrates substantial promise in creating precise biomimetic constructs and paves the way for future advancements in vision-guided robotic bioprinting, including the integration of multi-material printing techniques to enhance versatility.
Collapse
Affiliation(s)
- Erfan Shojaei Barjuei
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, T2N 1N4, Canada
| | - Joonhwan Shin
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, T2N 1N4, Canada
| | - Keekyoung Kim
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, T2N 1N4, Canada
- Deparement of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, T2N 1N4, Canada
| | - Jihyun Lee
- Department of Mechanical and Manufacturing Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, T2N 1N4, Canada.
| |
Collapse
|
12
|
Xie ZJ, Yuan BW, Chi MM, Hong J. Focus on seed cells: stem cells in 3D bioprinting of corneal grafts. Front Bioeng Biotechnol 2024; 12:1423864. [PMID: 39050685 PMCID: PMC11267584 DOI: 10.3389/fbioe.2024.1423864] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2024] [Accepted: 06/24/2024] [Indexed: 07/27/2024] Open
Abstract
Corneal opacity is one of the leading causes of severe vision impairment. Corneal transplantation is the dominant therapy for irreversible corneal blindness. However, there is a worldwide shortage of donor grafts and consequently an urgent demand for alternatives. Three-dimensional (3D) bioprinting is an innovative additive manufacturing technology for high-resolution distribution of bioink to construct human tissues. The technology has shown great promise in the field of bone, cartilage and skin tissue construction. 3D bioprinting allows precise structural construction and functional cell printing, which makes it possible to print personalized full-thickness or lamellar corneal layers. Seed cells play an important role in producing corneal biological functions. And stem cells are potential seed cells for corneal tissue construction. In this review, the basic anatomy and physiology of the natural human cornea and the grafts for keratoplasties are introduced. Then, the applications of 3D bioprinting techniques and bioinks for corneal tissue construction and their interaction with seed cells are reviewed, and both the application and promising future of stem cells in corneal tissue engineering is discussed. Finally, the development trends requirements and challenges of using stem cells as seed cells in corneal graft construction are summarized, and future development directions are suggested.
Collapse
Affiliation(s)
- Zi-jun Xie
- Department of Ophthalmology, Peking University Third Hospital, Beijing, China
- Beijing Key Laboratory of Restoration of Damaged Ocular Nerve, Peking University Third Hospital, Beijing, China
| | - Bo-wei Yuan
- Department of Ophthalmology, Peking University Third Hospital, Beijing, China
- Beijing Key Laboratory of Restoration of Damaged Ocular Nerve, Peking University Third Hospital, Beijing, China
| | - Miao-miao Chi
- Department of Ophthalmology, Peking University Third Hospital, Beijing, China
- Beijing Key Laboratory of Restoration of Damaged Ocular Nerve, Peking University Third Hospital, Beijing, China
| | - Jing Hong
- Department of Ophthalmology, Peking University Third Hospital, Beijing, China
- Beijing Key Laboratory of Restoration of Damaged Ocular Nerve, Peking University Third Hospital, Beijing, China
| |
Collapse
|
13
|
Thirunavukarasu AJ, Morales-Wong F, Halim NSH, Han E, Koh SK, Zhou L, Kocaba V, Venkatraman S, Mehta JS, Riau AK. Nanohydroxyapatite Coating Attenuates Fibrotic and Immune Responses to Promote Keratoprosthesis Biointegration in Advanced Ocular Surface Disorders. ACS APPLIED MATERIALS & INTERFACES 2024; 16:25892-25908. [PMID: 38740379 PMCID: PMC11129699 DOI: 10.1021/acsami.4c04077] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/12/2024] [Revised: 04/17/2024] [Accepted: 04/18/2024] [Indexed: 05/16/2024]
Abstract
Keratoprosthesis (KPro) implantation is frequently the only recourse for patients with severe corneal disease. However, problems arise due to inadequate biointegration of the KPro, particularly the PMMA optical cylinder, such as tissue detachment, tissue melting, or eye-threatening infection in the interface. Here, using the AuroKPro as a model prosthesis, a surface functionalization approach─coating the optical cylinder with nanohydroxyapatite (nHAp)─was trialed in rabbit eyes with and without a proceeding chemical injury. In chemically injured eyes, which simulated total limbal epithelial stem cell deficiency, clear benefits were conferred by the coating. The total modified Hackett-McDonald score and area of tissue apposition differences 12 weeks after implantation were 5.0 and 22.5%, respectively. Mechanical push-in tests revealed that 31.8% greater work was required to detach the tissues. These differences were less marked in uninjured eyes, which showed total score and tissue apposition differences of 2.5 and 11.5%, respectively, and a work difference of 23.5%. The improved biointegration could be contributed by the attenuated expression of fibronectin (p = 0.036), collagen 3A1 (p = 0.033), and α-smooth muscle actin (p = 0.045)─proteins typically upregulated during nonadherent fibrous capsule envelopment of bioinert material─adjacent to the optical cylinders. The coating also appeared to induce a less immunogenic milieu in the ocular surface tissue, evidenced by the markedly lower expression of tear proteins associated with immune and stimulus responses. Collectively, the level of these tear proteins in eyes with coated prostheses was 1.1 ± 13.0% of naïve eyes: substantially lower than with noncoated KPros (246.5 ± 79.3% of naïve, p = 0.038). Together, our results indicated that nHAp coating may reduce the risk of prosthesis failure in severely injured eyes, which are representative of the cohort of KPro patients.
Collapse
Affiliation(s)
- Arun J. Thirunavukarasu
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
- Oxford
University Clinical Academic Graduate School, University of Oxford, Oxford OX3 9DU, United
Kingdom
| | - Fernando Morales-Wong
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
- Singapore
National Eye Centre, Singapore 168751, Singapore
- Autonomous
University of Nuevo Leon, San Nicolas
de los Garza, Nuevo Leon 66455, Mexico
| | | | - Evelina Han
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
| | - Siew Kwan Koh
- Ocular
Proteomics Group, Singapore Eye Research
Institute, Singapore 169856, Singapore
| | - Lei Zhou
- Department
of Applied Biology and Chemical Technology, Hong Kong Polytechnic University, Hung Hom, Hong Kong
- Centre
for Eye and Vision Research, Shatin, Hong Kong
| | - Viridiana Kocaba
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
| | - Subramanian Venkatraman
- Department
of Materials Science and Engineering, National
University of Singapore, Singapore 117575, Singapore
- iHealthTech, National University of Singapore, Singapore 117599, Singapore
| | - Jodhbir S. Mehta
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
- Singapore
National Eye Centre, Singapore 168751, Singapore
- Ophthalmology
and Visual Sciences Academic Clinical Programme, Duke-NUS Medical School, Singapore 169857, Singapore
| | - Andri K. Riau
- Tissue
Engineering and Cell Therapy Group, Singapore
Eye Research Institute, Singapore 169856, Singapore
- Ophthalmology
and Visual Sciences Academic Clinical Programme, Duke-NUS Medical School, Singapore 169857, Singapore
| |
Collapse
|
14
|
Vernon MJ, Mela P, Dilley RJ, Jansen S, Doyle BJ, Ihdayhid AR, De-Juan-Pardo EM. 3D printing of heart valves. Trends Biotechnol 2024; 42:612-630. [PMID: 38238246 DOI: 10.1016/j.tibtech.2023.11.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2023] [Revised: 10/31/2023] [Accepted: 11/01/2023] [Indexed: 05/04/2024]
Abstract
3D printing technologies have the potential to revolutionize the manufacture of heart valves through the ability to create bespoke, complex constructs. In light of recent technological advances, we review the progress made towards 3D printing of heart valves, focusing on studies that have utilised these technologies beyond manufacturing patient-specific moulds. We first overview the key requirements of a heart valve to assess functionality. We then present the 3D printing technologies used to engineer heart valves. By referencing International Organisation for Standardisation (ISO) Standard 5840 (Cardiovascular implants - Cardiac valve prostheses), we provide insight into the achieved functionality of these valves. Overall, 3D printing promises to have a significant positive impact on the creation of artificial heart valves and potentially unlock full complex functionality.
Collapse
Affiliation(s)
- Michael J Vernon
- T3mPLATE, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia; Vascular Engineering Laboratory, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia; School of Engineering, The University of Western Australia, Perth, WA 6009, Australia
| | - Petra Mela
- Medical Materials and Implants, Department of Mechanical Engineering, Munich Institute of Biomedical Engineering and TUM School of Engineering and Design, Technical University of Munich, Boltzmannstrasse 15, 85748 Garching, Germany
| | - Rodney J Dilley
- T3mPLATE, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia
| | - Shirley Jansen
- Curtin Medical School, Curtin University, Perth, WA 6102, Australia; School of Medicine, Faculty of Health and Medical Sciences, The University of Western Australia, Perth, WA 6009, Australia; Department of Vascular and Endovascular Surgery, Sir Charles Gairdner Hospital, Perth, WA 6009, Australia; Heart and Vascular Research Institute, Harry Perkins Institute of Medical Research, Perth, WA 6009, Australia
| | - Barry J Doyle
- Vascular Engineering Laboratory, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia; School of Engineering, The University of Western Australia, Perth, WA 6009, Australia
| | - Abdul R Ihdayhid
- T3mPLATE, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia; Curtin Medical School, Curtin University, Perth, WA 6102, Australia; Department of Cardiology, Fiona Stanley Hospital, Perth, WA 6150, Australia
| | - Elena M De-Juan-Pardo
- T3mPLATE, Harry Perkins Institute of Medical Research, Queen Elizabeth II Medical Centre and University of Western Australia Centre for Medical Research, The University of Western Australia, Perth, WA 6009, Australia; School of Engineering, The University of Western Australia, Perth, WA 6009, Australia; Curtin Medical School, Curtin University, Perth, WA 6102, Australia.
| |
Collapse
|
15
|
Lee GW, Chandrasekharan A, Roy S, Thamarappalli A, Mahaling B, Lee H, Seong KY, Ghosh S, Yang SY. 3D bioprinting of stromal cells-laden artificial cornea based on visible light-crosslinkable bioinks forming multilength networks. Biofabrication 2024; 16:035002. [PMID: 38507802 DOI: 10.1088/1758-5090/ad35eb] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Accepted: 03/20/2024] [Indexed: 03/22/2024]
Abstract
3D bioprinting has the potential for the rapid and precise engineering of hydrogel constructs that can mimic the structural and optical complexity of a healthy cornea. However, the use of existing light-activated bioinks for corneal printing is limited by their poor cytocompatibility, use of cytotoxic photoinitiators (PIs), low photo-crosslinking efficiency, and opaque/colored surface of the printed material. Herein, we report a fast-curable, non-cytotoxic, optically transparent bioprinting system using a new water-soluble benzoyl phosphinate-based PI and photocrosslinkable methacrylated hyaluronic acid (HAMA). Compared with commercially available PIs, the newly developed PI, lithium benzoyl (phenyl) phosphinate (BP), demonstrated increased photoinitiation efficiency under visible light and low cytotoxicity. Using a catalytic amount of BP, the HA-based bioinks quickly formed 3D hydrogel constructs under low-energy visible-light irradiation (405 nm, <1 J cm-2). The mechanical properties and printability of photocurable bioinks were further improved by blending low (10 kDa) and high (100 kDa) molecular weight (MW) HAMA by forming multilength networks. For potential applications as corneal scaffolds, stromal cell-laden dome-shaped constructs were fabricated using MW-blended HAMA/BP bioink and a digital light processing printer. The HA-based photocurable bioinks exhibited good cytocompatibility (80%-95%), fast curing kinetics (<5 s), and excellent optical transparency (>90% in the visible range), potentially making them suitable for corneal tissue engineering.
Collapse
Affiliation(s)
- Gyeong Won Lee
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| | - Ajeesh Chandrasekharan
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| | - Subhadeep Roy
- Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi 110016, India
| | - Akash Thamarappalli
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| | - Binapani Mahaling
- Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi 110016, India
| | - Hyeseon Lee
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| | - Keum-Yong Seong
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| | - Sourabh Ghosh
- Department of Textile and Fibre Engineering, Indian Institute of Technology, Delhi 110016, India
| | - Seung Yun Yang
- Department of Biomaterials Science (BK21 Four Program), Pusan National University, Miryang 50463, Republic of Korea
| |
Collapse
|
16
|
Puistola P, Kethiri A, Nurminen A, Turkki J, Hopia K, Miettinen S, Mörö A, Skottman H. Cornea-Specific Human Adipose Stem Cell-Derived Extracellular Matrix for Corneal Stroma Tissue Engineering. ACS APPLIED MATERIALS & INTERFACES 2024; 16:15761-15772. [PMID: 38513048 PMCID: PMC10995904 DOI: 10.1021/acsami.3c17803] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 01/23/2024] [Accepted: 01/23/2024] [Indexed: 03/23/2024]
Abstract
Utilizing tissue-specific extracellular matrices (ECMs) is vital for replicating the composition of native tissues and developing biologically relevant biomaterials. Human- or animal-derived donor tissues and organs are the current gold standard for the source of these ECMs. To overcome the several limitations related to these ECM sources, including the highly limited availability of donor tissues, cell-derived ECM offers an alternative approach for engineering tissue-specific biomaterials, such as bioinks for three-dimensional (3D) bioprinting. 3D bioprinting is a state-of-the-art biofabrication technology that addresses the global need for donor tissues and organs. In fact, there is a vast global demand for human donor corneas that are used for treating corneal blindness, often resulting from damage in the corneal stromal microstructure. Human adipose tissue is one of the most abundant tissues and easy to access, and adipose tissue-derived stem cells (hASCs) are a highly advantageous cell type for tissue engineering. Furthermore, hASCs have already been studied in clinical trials for treating corneal stromal pathologies. In this study, a corneal stroma-specific ECM was engineered without the need for donor corneas by differentiating hASCs toward corneal stromal keratocytes (hASC-CSKs). Furthermore, this ECM was utilized as a component for corneal stroma-specific bioink where hASC-CSKs were printed to produce corneal stroma structures. This cost-effective approach combined with a clinically relevant cell type provides valuable information on developing more sustainable tissue-specific solutions and advances the field of corneal tissue engineering.
Collapse
Affiliation(s)
- Paula Puistola
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Abhinav Kethiri
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Antti Nurminen
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Johannes Turkki
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Karoliina Hopia
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Susanna Miettinen
- Adult
Stem Cell Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
- Tays
Research Services, Wellbeing Services County of Pirkanmaa, Tampere University Hospital, 33520 Tampere, Finland
| | - Anni Mörö
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Heli Skottman
- Eye
Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| |
Collapse
|
17
|
Vijayaraghavan R, Loganathan S, Valapa RB. 3D bioprinted photo crosslinkable GelMA/methylcellulose hydrogel mimicking native corneal model with enhanced in vitro cytocompatibility and sustained keratocyte phenotype for stromal regeneration. Int J Biol Macromol 2024; 264:130472. [PMID: 38428773 DOI: 10.1016/j.ijbiomac.2024.130472] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2023] [Revised: 02/15/2024] [Accepted: 02/25/2024] [Indexed: 03/03/2024]
Abstract
Corneal transplantation serves as the standard clinical therapy for serious corneal disorders. However, rejection of grafts, significant expenditures, and most crucially, the global donor shortage, may affect the outcome. Recently, 3D bioprinting using biodegradable polymeric materials has become a suitable method for creating tissue replicas with identical architecture. One such most renowned material is GelMA, for its scaffold's three-dimensional structure, biocompatibility, robust mechanics, and favourable optical transmittance. However, GelMA's inadequate viscosity to print at body temperature with better form integrity remains an obstacle. The aim of this work is to create 3D printed GelMA/MC hydrogels for corneal stroma tissue engineering using MC's printability at room temperature and GelMA's irreversible photo cross-linking with UV irradiation. The print speed and pressure conditions for 3D GelMA/MC hydrogels were tuned. Thermal, morphological and physicochemical characteristics were studied for two distinct concentrations of GelMA/MC hydrogels. The hydrogels achieved a transparency of ~78 % (at 700 nm), which was on par with that of the normal cornea (80 %). The in vitro studies conducted using goat corneal stromal cells demonstrated the ability of both hydrogels to promote cell adhesion and proliferation. Expression of Vimentin and keratan sulphate validated the phenotype of keratocytes in the hydrogel. This 3D printed GelMA/MC hydrogel model mimics biophysical characteristics of the native corneal stroma, which may hold promise for clinical corneal stromal tissue engineering.
Collapse
Affiliation(s)
- Renuka Vijayaraghavan
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi 630003, Tamil Nadu, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
| | - Sravanthi Loganathan
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi 630003, Tamil Nadu, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
| | - Ravi Babu Valapa
- Electrochemical Process Engineering, CSIR-Central Electrochemical Research Institute (CECRI), Karaikudi 630003, Tamil Nadu, India; Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
| |
Collapse
|
18
|
Pal P, Sambhakar S, Paliwal S, Kumar S, Kalsi V. Biofabrication paradigms in corneal regeneration: bridging bioprinting techniques, natural bioinks, and stem cell therapeutics. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 2024; 35:717-755. [PMID: 38214998 DOI: 10.1080/09205063.2024.2301817] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2023] [Accepted: 12/29/2023] [Indexed: 01/14/2024]
Abstract
Corneal diseases are a major cause of vision loss worldwide. Traditional methods like corneal transplants from donors are effective but face challenges like limited donor availability and the risk of graft rejection. Therefore, new treatment methods are essential. This review examines the growing field of bioprinting and biofabrication in corneal tissue engineering. We begin by discussing various bioprinting methods such as stereolithography, inkjet, and extrusion printing, highlighting their strengths and weaknesses for eye-related uses. We also explore how biological tissues are made suitable for bioprinting through a process called decellularization, which can be achieved using chemical, physical, or biological methods. The review then looks at natural materials, known as bioinks, used in bioprinting. We focus on materials like gelatin, collagen, fibrin, chitin, chitosan, silk fibroin, and alginate, examining their mechanical and biological properties. The importance of hydrogel scaffolds, particularly those based on collagen and other materials, is also discussed in the context of repairing corneal tissue. Another key area we cover is the use of stem cells in corneal regeneration. We pay special attention to limbal epithelial stem cells and mesenchymal stromal cells, highlighting their roles in this process. The review concludes with an overview of the latest advancements in corneal tissue bioprinting, from early techniques to advanced methods of delivering stem cells using bioengineered materials. In summary, this review presents the current state and future potential of bioprinting and biofabrication in creating functional corneal tissues, highlighting new developments and ongoing challenges with a view towards restoring vision.
Collapse
Affiliation(s)
- Pankaj Pal
- Department of Pharmacy, Banasthali Vidyapith, Radha Kishnpura, Rajasthan, India
| | - Sharda Sambhakar
- Department of Pharmacy, Banasthali Vidyapith, Radha Kishnpura, Rajasthan, India
| | - Shailendra Paliwal
- Department of Pharmacy, L.L.R.M Medical College, Meerut, Uttar Pradesh, India
| | - Shobhit Kumar
- Department of Pharmaceutical Technology, Meerut Institute of Engineering and Technology, Meerut, Uttar Pradesh, India
| | - Vandna Kalsi
- School of Pharmaceutical Sciences, Lovely Professional University, Phagwara, Punjab, India
| |
Collapse
|
19
|
Bonato P, Bagno A. Replace or Regenerate? Diverse Approaches to Biomaterials for Treating Corneal Lesions. Biomimetics (Basel) 2024; 9:202. [PMID: 38667213 PMCID: PMC11047895 DOI: 10.3390/biomimetics9040202] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Revised: 03/22/2024] [Accepted: 03/25/2024] [Indexed: 04/28/2024] Open
Abstract
The inner structures of the eye are protected by the cornea, which is a transparent membrane exposed to the external environment and subjected to the risk of lesions and diseases, sometimes resulting in impaired vision and blindness. Several eye pathologies can be treated with a keratoplasty, a surgical procedure aimed at replacing the cornea with tissues from human donors. Even though the success rate is high (up to 90% for the first graft in low-risk patients at 5-year follow-up), this approach is limited by the insufficient number of donors and several clinically relevant drawbacks. Alternatively, keratoprosthesis can be applied in an attempt to restore minimal functions of the cornea: For this reason, it is used only for high-risk patients. Recently, many biomaterials of both natural and synthetic origin have been developed as corneal substitutes to restore and replace diseased or injured corneas in low-risk patients. After illustrating the traditional clinical approaches, the present paper aims to review the most innovative solutions that have been recently proposed to regenerate the cornea, avoiding the use of donor tissues. Finally, innovative approaches to biological tissue 3D printing and xenotransplantation will be mentioned.
Collapse
Affiliation(s)
| | - Andrea Bagno
- Department of Industrial Engineering, University of Padua, 35131 Padua, Italy
| |
Collapse
|
20
|
Bhutani U, Dey N, Chowdhury SK, Waghmare N, Mahapatra RD, Selvakumar K, Chandru A, Bhowmick T, Agrawal P. Biopolymeric corneal lenticules by digital light processing based bioprinting: a dynamic substitute for corneal transplant. Biomed Mater 2024; 19:035017. [PMID: 38471165 DOI: 10.1088/1748-605x/ad3312] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Accepted: 03/12/2024] [Indexed: 03/14/2024]
Abstract
Digital light processing (DLP) technology has gained significant attention for its ability to construct intricate structures for various applications in tissue modeling and regeneration. In this study, we aimed to design corneal lenticules using DLP bioprinting technology, utilizing dual network bioinks to mimic the characteristics of the human cornea. The bioink was prepared using methacrylated hyaluronic acid and methacrylated gelatin, where ruthenium salt and sodium persulfate were included for mediating photo-crosslinking while tartrazine was used as a photoabsorber. The bioprinted lenticules were optically transparent (85.45% ± 0.14%), exhibited adhesive strength (58.67 ± 17.5 kPa), and compressive modulus (535.42 ± 29.05 kPa) sufficient for supporting corneal tissue integration and regeneration. Puncture resistance tests and drag force analysis further confirmed the excellent mechanical performance of the lenticules enabling their application as potential corneal implants. Additionally, the lenticules demonstrated outstanding support for re-epithelialization and stromal regeneration when assessed with human corneal stromal cells. We generated implant ready corneal lenticules while optimizing bioink and bioprinting parameters, providing valuable solution for individuals suffering from various corneal defects and waiting for corneal transplants.
Collapse
Affiliation(s)
- Utkarsh Bhutani
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Namit Dey
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Suvro Kanti Chowdhury
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Neha Waghmare
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Rita Das Mahapatra
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Kamalnath Selvakumar
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Arun Chandru
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| | - Tuhin Bhowmick
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
- Pandorum International Inc., San Francisco, CA, United States of America
| | - Parinita Agrawal
- Pandorum Technologies Private Limited, Bangalore Bioinnovation Centre, Helix Biotech Park, Electronic City, Phase 1, Bengaluru 560100, India
| |
Collapse
|
21
|
Grönroos P, Mörö A, Puistola P, Hopia K, Huuskonen M, Viheriälä T, Ilmarinen T, Skottman H. Bioprinting of human pluripotent stem cell derived corneal endothelial cells with hydrazone crosslinked hyaluronic acid bioink. Stem Cell Res Ther 2024; 15:81. [PMID: 38486306 PMCID: PMC10941625 DOI: 10.1186/s13287-024-03672-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Accepted: 02/20/2024] [Indexed: 03/17/2024] Open
Abstract
BACKGROUND Human corneal endothelial cells lack regenerative capacity through cell division in vivo. Consequently, in the case of trauma or dystrophy, the only available treatment modality is corneal tissue or primary corneal endothelial cell transplantation from cadaveric donor which faces a high global shortage. Our ultimate goal is to use the state-of-the-art 3D-bioprint technology for automated production of human partial and full-thickness corneal tissues using human stem cells and functional bioinks. In this study, we explore the feasibility of bioprinting the corneal endothelium using human pluripotent stem cell derived corneal endothelial cells and hydrazone crosslinked hyaluronic acid bioink. METHODS Corneal endothelial cells differentiated from human pluripotent stem cells were bioprinted using optimized hydrazone crosslinked hyaluronic acid based bioink. Before the bioprinting process, the biocompatibility of the bioink with cells was first analyzed with transplantation on ex vivo denuded rat and porcine corneas as well as on denuded human Descemet membrane. Subsequently, the bioprinting was proceeded and the viability of human pluripotent stem cell derived corneal endothelial cells were verified with live/dead stainings. Histological and immunofluorescence stainings involving ZO1, Na+/K+-ATPase and CD166 were used to confirm corneal endothelial cell phenotype in all experiments. Additionally, STEM121 marker was used to identify human cells from the ex vivo rat and porcine corneas. RESULTS The bioink, modified for human pluripotent stem cell derived corneal endothelial cells successfully supported both the viability and printability of the cells. Following up to 10 days of ex vivo transplantations, STEM121 positive cells were confirmed on the Descemet membrane of rat and porcine cornea demonstrating the biocompatibility of the bioink. Furthermore, biocompatibility was validated on denuded human Descemet membrane showing corneal endothelial -like characteristics. Seven days post bioprinting, the corneal endothelial -like cells were viable and showed polygonal morphology with expression and native-like localization of ZO-1, Na+/K+-ATPase and CD166. However, mesenchymal-like cells were observed in certain areas of the cultures, spreading beneath the corneal endothelial-like cell layer. CONCLUSIONS Our results demonstrate the successful printing of human pluripotent stem cell derived corneal endothelial cells using covalently crosslinked hyaluronic acid bioink. This approach not only holds promise for a corneal endothelium transplants but also presents potential applications in the broader mission of bioprinting the full-thickness human cornea.
Collapse
Affiliation(s)
- Pyry Grönroos
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Anni Mörö
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Paula Puistola
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Karoliina Hopia
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Maija Huuskonen
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
- Tays Eye Centre, Tampere University Hospital, Tampere, Finland
| | - Taina Viheriälä
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Tanja Ilmarinen
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland
| | - Heli Skottman
- Faculty of Medicine and Health Technology, Tampere University, Arvo Ylpön Katu 34, 33520, Tampere, Finland.
| |
Collapse
|
22
|
Hui J, Nie X, Wei P, Deng J, Kang Y, Tang K, Han G, Wang L, Liu W, Han Q. 3D printed fibroblast-loaded hydrogel for scleral remodeling to prevent the progression of myopia. J Mater Chem B 2024; 12:2559-2570. [PMID: 38362614 DOI: 10.1039/d3tb02548a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/17/2024]
Abstract
Pathologic myopia has seriously jeopardized the visual health of adolescents in the past decades. The progression of high myopia is associated with a decrease in collagen aggregation and thinning of the sclera, which ultimately leads to longer eye axis length and image formation in front of the retina. Herein, we report a fibroblast-loaded hydrogel as a posterior scleral reinforcement (PSR) surgery implant for the prevention of myopia progression. The fibroblast-loaded gelatin methacrylate (GelMA)-poly(ethylene glycol) diacrylate (PEGDA) hydrogel was prepared through bioprinting with digital light processing (DLP). The introduction of the PEGDA component endowed the GelMA-PEGDA hydrogel with a high compression modulus for PRS surgery. The encapsulated fibroblasts could consistently maintain a high survival rate during 7 days of in vitro incubation, and could normally secrete collagen type I. Eventually, both the hydrogel and fibroblast-loaded hydrogel demonstrated an effective shortening of the myopic eye axis length in a guinea pig model of visual deprivation over three weeks after implantation, and the sclera thickness of myopic guinea pigs became significantly thicker after 4 weeks, verifying the success of sclera remodeling and showing that myopic progression was effectively controlled. In particular, the fibroblast-loaded hydrogel demonstrated the best therapeutic effect through the synergistic effect of cell therapy and PSR surgery.
Collapse
Affiliation(s)
- Jingwen Hui
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| | - Xiongfeng Nie
- School of Material Science and Engineering, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin 300350, China
| | - Pinghui Wei
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| | - Jie Deng
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- School of Medicine, Nankai University, Tianjin, China
| | - Yuanzhe Kang
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| | - Kexin Tang
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| | - Guoge Han
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| | - Ling Wang
- State Key Laboratory of Medicinal Chemical Biology, College of Pharmacy, Nankai University, Tianjin 300071, China
| | - Wenguang Liu
- School of Material Science and Engineering, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin 300350, China
| | - Quanhong Han
- Tianjin Eye Hospital, No. 4 Gansu Road, Heping District, Tianjin 300020, China.
- Tianjin Key Lab of Ophthalmology and Visual Science, Tianjin, China
- Clinical College of Ophthalmology Tianjin Medical University, Tianjin Medical University, Tianjin, China
| |
Collapse
|
23
|
Wu KY, Tabari A, Mazerolle É, Tran SD. Towards Precision Ophthalmology: The Role of 3D Printing and Bioprinting in Oculoplastic Surgery, Retinal, Corneal, and Glaucoma Treatment. Biomimetics (Basel) 2024; 9:145. [PMID: 38534830 DOI: 10.3390/biomimetics9030145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/31/2023] [Revised: 02/04/2024] [Accepted: 02/16/2024] [Indexed: 03/28/2024] Open
Abstract
In the forefront of ophthalmic innovation, biomimetic 3D printing and bioprinting technologies are redefining patient-specific therapeutic strategies. This critical review systematically evaluates their application spectrum, spanning oculoplastic reconstruction, retinal tissue engineering, corneal transplantation, and targeted glaucoma treatments. It highlights the intricacies of these technologies, including the fundamental principles, advanced materials, and bioinks that facilitate the replication of ocular tissue architecture. The synthesis of primary studies from 2014 to 2023 provides a rigorous analysis of their evolution and current clinical implications. This review is unique in its holistic approach, juxtaposing the scientific underpinnings with clinical realities, thereby delineating the advantages over conventional modalities, and identifying translational barriers. It elucidates persistent knowledge deficits and outlines future research directions. It ultimately accentuates the imperative for multidisciplinary collaboration to enhance the clinical integration of these biotechnologies, culminating in a paradigm shift towards individualized ophthalmic care.
Collapse
Affiliation(s)
- Kevin Y Wu
- Division of Ophthalmology, Department of Surgery, University of Sherbrooke, Sherbrooke, QC J1G 2E8, Canada
| | - Adrian Tabari
- Southern Medical Program, Faculty of Medicine, University of British Columbia, Kelowna, BC V1V 1V7, Canada
| | - Éric Mazerolle
- Division of Ophthalmology, Department of Surgery, University of Sherbrooke, Sherbrooke, QC J1G 2E8, Canada
| | - Simon D Tran
- Faculty of Dental Medicine and Oral Health Sciences, McGill University, Montreal, QC H3A 1G1, Canada
| |
Collapse
|
24
|
Cao L, Zhang Z, Yuan D, Yu M, Min J. Tissue engineering applications of recombinant human collagen: a review of recent progress. Front Bioeng Biotechnol 2024; 12:1358246. [PMID: 38419725 PMCID: PMC10900516 DOI: 10.3389/fbioe.2024.1358246] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Accepted: 01/31/2024] [Indexed: 03/02/2024] Open
Abstract
With the rapid development of synthetic biology, recombinant human collagen has emerged as a cutting-edge biological material globally. Its innovative applications in the fields of material science and medicine have opened new horizons in biomedical research. Recombinant human collagen stands out as a highly promising biomaterial, playing a pivotal role in crucial areas such as wound healing, stroma regeneration, and orthopedics. However, realizing its full potential by efficiently delivering it for optimal therapeutic outcomes remains a formidable challenge. This review provides a comprehensive overview of the applications of recombinant human collagen in biomedical systems, focusing on resolving this crucial issue. Additionally, it encompasses the exploration of 3D printing technologies incorporating recombinant collagen to address some urgent clinical challenges in regenerative repair in the future. The primary aim of this review also is to spotlight the advancements in the realm of biomaterials utilizing recombinant collagen, with the intention of fostering additional innovation and making significant contributions to the enhancement of regenerative biomaterials, therapeutic methodologies, and overall patient outcomes.
Collapse
Affiliation(s)
- Lili Cao
- Department of Plastic Surgery, Zhejiang Rongjun Hospital, Jiaxing, Zhejiang, China
| | - Zhongfeng Zhang
- Department of Plastic Surgery, Zhejiang Rongjun Hospital, Jiaxing, Zhejiang, China
| | - Dan Yuan
- Department of Plastic Surgery, Zhejiang Rongjun Hospital, Jiaxing, Zhejiang, China
| | - Meiping Yu
- Department of Plastic Surgery, Zhejiang Rongjun Hospital, Jiaxing, Zhejiang, China
| | - Jie Min
- General Surgery Department, Jiaxing No.1 Hospital, Jiaxing, Zhejiang, China
| |
Collapse
|
25
|
Puistola P, Miettinen S, Skottman H, Mörö A. Novel strategy for multi-material 3D bioprinting of human stem cell based corneal stroma with heterogenous design. Mater Today Bio 2024; 24:100924. [PMID: 38226015 PMCID: PMC10788621 DOI: 10.1016/j.mtbio.2023.100924] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2023] [Revised: 12/13/2023] [Accepted: 12/18/2023] [Indexed: 01/17/2024] Open
Abstract
Three-dimensional (3D) bioprinting offers an automated, customizable solution to manufacture highly detailed 3D tissue constructs and holds great promise for regenerative medicine to solve the severe global shortage of donor tissues and organs. However, uni-material 3D bioprinting is not sufficient for manufacturing heterogenous 3D constructs with native-like microstructures and thus, innovative multi-material solutions are required. Here, we developed a novel multi-material 3D bioprinting strategy for bioprinting human corneal stroma. The human cornea is the transparent outer layer of your eye, and vision loss due to corneal blindness has serious effects on the quality of life of individuals. One of the main reasons for corneal blindness is the damage in the detailed organization of the corneal stroma where collagen fibrils are arranged in layers perpendicular to each other and the corneal stromal cells grow along the fibrils. Donor corneas for treating corneal blindness are scarce, and the current tissue engineering (TE) technologies cannot produce artificial corneas with the complex microstructure of native corneal stroma. To address this, we developed a novel multi-material 3D bioprinting strategy to mimic detailed organization of corneal stroma. These multi-material 3D structures with heterogenous design were bioprinted by using human adipose tissue -derived stem cells (hASCs) and hyaluronic acid (HA) -based bioinks with varying stiffnesses. In our novel design of 3D models, acellular stiffer HA-bioink and cell-laden softer HA-bioink were printed in alternating filaments, and the filaments were printed perpendicularly in alternating layers. The multi-material bioprinting strategy was applied for the first time in corneal stroma 3D bioprinting to mimic the native microstructure. As a result, the soft bioink promoted cellular growth and tissue formation of hASCs in the multi-material 3D bioprinted composites, whereas the stiff bioink provided mechanical support as well as guidance of cellular organization upon culture. Interestingly, cellular growth and tissue formation altered the mechanical properties of the bioprinted composite constructs significantly. Importantly, the bioprinted composite structures showed good integration to the host tissue in ex vivo cornea organ culture model. As a conclusion, the developed multi-material bioprinting strategy provides great potential as a biofabrication solution for manufacturing organized, heterogenous microstructures of native tissues. To the best of our knowledge, this multi-material bioprinting strategy has never been applied in corneal bioprinting. Therefore, our work advances the technological achievements in additive manufacturing and brings the field of corneal TE to a new level.
Collapse
Affiliation(s)
- Paula Puistola
- Eye Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Susanna Miettinen
- Adult Stem Cell Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
- Research, Development and Innovation Centre, Tampere University Hospital, 33520 Tampere, Finland
| | - Heli Skottman
- Eye Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| | - Anni Mörö
- Eye Regeneration Group, Faculty of Medicine and Health Technology, Tampere University, Tampere 33520, Finland
| |
Collapse
|
26
|
Vrehen AF, Rutten MGTA, Dankers PYW. Development of a Fully Synthetic Corneal Stromal Construct via Supramolecular Hydrogel Engineering. Adv Healthc Mater 2023; 12:e2301392. [PMID: 37747759 PMCID: PMC11468521 DOI: 10.1002/adhm.202301392] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 09/14/2023] [Indexed: 09/26/2023]
Abstract
Recent advances in the field of ophthalmology show great potential in the design of bioengineered constructs to mimic the corneal stroma. Hydrogels based on synthetic supramolecular polymers, are attractive synthetic mimics of the natural highly hydrated corneal stroma. Here, a fully synthetic corneal stromal construct is developed via engineering of an injectable supramolecular hydrogel based on ureido-pyrimidinone (UPy) moieties. The hydrogel displays a dynamic and tunable behavior, which allows for control of biochemical and mechanical cues. Two hydrogels are developed, a fully synthetic hydrogel functionalized with a bioactive cyclic arginine-glycine-aspartate UPy (UPy-cRGD) additive, and a hybrid hydrogel based on UPy-moieties mixed with collagen type I fibers. Both hydrogels supported cell encapsulation and associated cellular deposition of extracellular matrix (ECM) proteins after 21 days. Excitingly, the hydrogels support the activation of isolated primary keratocytes into stromal fibroblasts as well as the differentiation toward more quiescent corneal stromal keratocytes, demonstrated by their characteristic long dendritic protrusions and a substantially diminished cytokine secretion. Furthermore, cells survive shear stresses during an injectability test. Together, these findings highlight the development of an injectable supramolecular hydrogel as a synthetic corneal stromal microenvironment able to host primary keratocytes.
Collapse
Affiliation(s)
- Annika F. Vrehen
- Institute for Complex Molecular SystemsDepartment of Biomedical EngineeringLaboratory of Cell and Tissue EngineeringLaboratory of Chemical BiologyEindhoven University of TechnologyGroene Loper 7Eindhoven5612 AZThe Netherlands
| | - Martin G. T. A. Rutten
- Institute for Complex Molecular SystemsDepartment of Biomedical EngineeringLaboratory of Cell and Tissue EngineeringLaboratory of Chemical BiologyEindhoven University of TechnologyGroene Loper 7Eindhoven5612 AZThe Netherlands
| | - Patricia Y. W. Dankers
- Institute for Complex Molecular SystemsDepartment of Biomedical EngineeringLaboratory of Cell and Tissue EngineeringLaboratory of Chemical BiologyEindhoven University of TechnologyGroene Loper 7Eindhoven5612 AZThe Netherlands
| |
Collapse
|
27
|
Abdalkader RK, Fujita T. Corneal epithelium models for safety assessment in drug development: Present and future directions. Exp Eye Res 2023; 237:109697. [PMID: 37890755 DOI: 10.1016/j.exer.2023.109697] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2022] [Revised: 10/18/2023] [Accepted: 10/24/2023] [Indexed: 10/29/2023]
Abstract
The human corneal epithelial barrier plays a crucial role in drug testing studies, including drug absorption, distribution, metabolism, and excretion (ADME), as well as toxicity testing during the preclinical stages of drug development. However, despite the valuable insights gained from animal and current in vitro models, there remains a significant discrepancy between preclinical drug predictions and actual clinical outcomes. Additionally, there is a growing emphasis on adhering to the 3R principles (refine, reduce, replace) to minimize the use of animals in testing. To tackle these challenges, there is a rising demand for alternative in vitro models that closely mimic the human corneal epithelium. Recently, remarkable advancements have been made in two key areas: microphysiological systems (MPS) or organs-on-chips (OoCs), and stem cell-derived organoids. These cutting-edge platforms integrate four major disciplines: stem cells, microfluidics, bioprinting, and biosensing technologies. This integration holds great promise in developing powerful and biomimetic models of the human cornea.
Collapse
Affiliation(s)
- Rodi Kado Abdalkader
- Ritsumeikan Global Innovation Research Organization (R-GIRO), Ritsumeikan University, 1-1-1 Noji-Higashi, Kusatsu, Shiga, 525-8577, Japan.
| | - Takuya Fujita
- Ritsumeikan Global Innovation Research Organization (R-GIRO), Ritsumeikan University, 1-1-1 Noji-Higashi, Kusatsu, Shiga, 525-8577, Japan; Department of Pharmaceutical Sciences, Ritsumeikan University, 1-1-1 Noji-Higashi, Kusatsu, Shiga, 525-8577, Japan
| |
Collapse
|
28
|
Jiao X, Peng X, Jin X, Liu N, Yu Y, Liu R, Li Z. Nano-composite system of traditional Chinese medicine for ocular applications: molecular docking and three-dimensional modeling insight for intelligent drug evaluation. Drug Deliv Transl Res 2023; 13:3132-3144. [PMID: 37355484 DOI: 10.1007/s13346-023-01376-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/30/2023] [Indexed: 06/26/2023]
Abstract
The absorption of drugs was impeded in the posterior part of the eye due to the special structure. In addition, it was crucial to comprehend transport laws of molecules in ocular drug delivery for designing effective strategies. However, the current quality evaluation methods of the eye were backward and lack of dynamic monitoring of drug processes in vivo. Herein, nano-drug delivery system and three-dimensional (3D) model were combined to overcome the problems of low bioavailability and diffusion law. The model drugs were screened by molecular docking. The flexible nano-liposome (FNL) and temperature-sensitive gel (TSG) composite formulation was characterized through comprehensive evaluation. COMSOL software was utilized to build 3D eyeball to predict the bioavailability of drugs. The size of the preparation was about 98.34 nm which is relatively optimal for the enhanced permeability of the eyes. The formulation showed a stronger safety and non-irritant. The pharmacokinetics results of aqueous humor showed that the AUC of two drugs in this system increased by 3.79 and 3.94 times, respectively. The results of 3D calculation model proved that the concentrations of drugs reaching the retina were 1.90×10-5 mol/m3 and 6.37×10-6 mol/m3. In conclusion, the FNL-TSG markedly improved the bioavailability of multiple components in the eye. More importantly, a simplified 3D model was developed to preliminarily forecast the bioavailability of the retina after drug infusion, providing technical support for the accurate evaluation of ocular drug delivery. It provided new pattern for the development of intelligent versatile ophthalmic preparations.
Collapse
Affiliation(s)
- Xinyi Jiao
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Xingru Peng
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Xin Jin
- Military Medicine Section, Dongli District, Logistics University of People's Armed Police Force, 1 Huizhihuan Road, Tianjin, 300309, China
| | - Ning Liu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Yang Yu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| | - Rui Liu
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China.
| | - Zheng Li
- State Key Laboratory of Component‑Based Chinese Medicine, College of Pharmaceutical Engineering of Traditional Chinese Medicine, Haihe Laboratory of Modern Chinese Medicine, Tianjin University of Traditional Chinese Medicine, Tianjin, 301617, China
| |
Collapse
|
29
|
Gingras AA, Jansen PA, Smith C, Zhang X, Niu Y, Zhao Y, Roberts CJ, Herderick ED, Swindle-Reilly KE. 3D Bioprinting of Acellular Corneal Stromal Scaffolds with a Low Cost Modified 3D Printer: A Feasibility Study. Curr Eye Res 2023; 48:1112-1121. [PMID: 37669915 DOI: 10.1080/02713683.2023.2251172] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2023] [Revised: 07/21/2023] [Accepted: 08/20/2023] [Indexed: 09/07/2023]
Abstract
PURPOSE Loss of corneal transparency is one of the major causes of visual loss, generating a considerable health and economic burden globally. Corneal transplantation is the leading treatment procedure, where the diseased cornea is replaced by donated corneal tissue. Despite the rise of cornea donations in the past decade, there is still a huge gap between cornea supply and demand worldwide. 3D bioprinting is an emerging technology that can be used to fabricate tissue equivalents that resemble the native tissue, which holds great potential for corneal tissue engineering application. This study evaluates the manufacturability of 3D bioprinted acellular corneal grafts using low-cost equipment and software, not necessarily designed for bioprinting applications. This approach allows access to 3D printed structures where commercial 3D bioprinters are cost prohibitive and not readily accessible to researchers and clinicians. METHODS Two extrusion-based methods were used to 3D print acellular corneal stromal scaffolds with collagen, alginate, and alginate-gelatin composite bioinks from a digital corneal model. Compression testing was used to determine moduli. RESULTS The printed model was visually transparent with tunable mechanical properties. The model had central radius of curvature of 7.4 mm, diameter of 13.2 mm, and central thickness of 0.4 mm. The compressive secant modulus of the material was 23.7 ± 1.7 kPa at 20% strain. 3D printing into a concave mold had reliability advantages over printing into a convex mold. CONCLUSIONS The printed corneal models exhibited visible transparency and a dome shape, demonstrating the potential of this process for the preparation of acellular partial thickness corneal replacements. The modified printing process presented a low-cost option for corneal bioprinting.
Collapse
Affiliation(s)
- Amelia A Gingras
- Center for Design and Manufacturing Excellence, The Ohio State University, Columbus, OH, USA
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
| | - Peter A Jansen
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
| | - Caroline Smith
- Center for Design and Manufacturing Excellence, The Ohio State University, Columbus, OH, USA
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
| | - Xu Zhang
- Center for Design and Manufacturing Excellence, The Ohio State University, Columbus, OH, USA
| | - Ye Niu
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
- Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, OH, USA
| | - Yi Zhao
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
- Department of Ophthalmology and Visual Sciences, The Ohio State University Wexner Medical Center, Columbus, OH, USA
| | - Cynthia J Roberts
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
- Department of Ophthalmology and Visual Sciences, The Ohio State University Wexner Medical Center, Columbus, OH, USA
| | - Edward D Herderick
- Center for Design and Manufacturing Excellence, The Ohio State University, Columbus, OH, USA
| | - Katelyn E Swindle-Reilly
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA
- Department of Ophthalmology and Visual Sciences, The Ohio State University Wexner Medical Center, Columbus, OH, USA
- William G. Lowrie Department of Chemical and Biomolecular Engineering, The Ohio State University, Columbus, OH, USA
| |
Collapse
|
30
|
Prager AJ, Henning N, Burns L, Ramaprasad A, Basti S, Laronda MM. Utilizing 3D Printing Technology to Create Prosthetic Irises: Proof of Concept and Workflow. Bioengineering (Basel) 2023; 10:1287. [PMID: 38002411 PMCID: PMC10669136 DOI: 10.3390/bioengineering10111287] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2023] [Revised: 10/01/2023] [Accepted: 10/24/2023] [Indexed: 11/26/2023] Open
Abstract
PURPOSE There are currently limited treatment options for aniridia. In this context, 3D printed iris implants may provide a cost-effective, cosmetically acceptable alternative for patients with aniridia. The purpose of this study was to develop a proof-of-concept workflow for manufacturing 3D printed iris implants using a silicone ink palette that aesthetically matches iris shades, identified in slit lamp images. METHODS Slit lamp iris photos from 11 healthy volunteers (3 green; 4 blue; 4 brown) were processed using k-means binning analyses to identify two or three prominent colors each. Candidate silicone inks were created by precisely combining pigments. A crowdsourcing survey software was used to determine color matches between the silicone ink swatches and three prominent iris color swatches in 2 qualifying and 11 experimental workflows. RESULTS In total, 54 candidate silicone inks (20 brown; 16 green; 18 blue) were developed and analyzed. Survey answers from 29 individuals that had passed the qualifying workflow were invited to identify "best matches" between the prominent iris colors and the silicone inks. From this color-match data, brown, blue, and green prototype artificial irises were printed with the silicone ink that aesthetically matched the three prominent colors. The iris was printed using a simplified three-layer five-branch starburst design at scale (12.8 mm base disc, with 3.5 mm pupil). CONCLUSIONS This proof-of-concept workflow produced color-matched silicone prosthetic irises at scale from a panel of silicone inks using prominent iris colors extracted from slit lamp images. Future work will include printing a more intricate iris crypt design and testing for biocompatibility.
Collapse
Affiliation(s)
- Alisa J. Prager
- Department of Ophthalmology, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA (A.R.); (S.B.)
| | - Nathaniel Henning
- Stanley Manne Children’s Research Institute, Ann and Robert H. Lurie Children’s Hospital of Chicago, Chicago, IL 60611, USA; (N.H.); (L.B.)
- Division of Endocrinology, Department of Pediatrics, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA
| | - Lauren Burns
- Stanley Manne Children’s Research Institute, Ann and Robert H. Lurie Children’s Hospital of Chicago, Chicago, IL 60611, USA; (N.H.); (L.B.)
- Division of Endocrinology, Department of Pediatrics, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA
| | - Abhijit Ramaprasad
- Department of Ophthalmology, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA (A.R.); (S.B.)
| | - Surendra Basti
- Department of Ophthalmology, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA (A.R.); (S.B.)
- Stanley Manne Children’s Research Institute, Ann and Robert H. Lurie Children’s Hospital of Chicago, Chicago, IL 60611, USA; (N.H.); (L.B.)
| | - Monica M. Laronda
- Stanley Manne Children’s Research Institute, Ann and Robert H. Lurie Children’s Hospital of Chicago, Chicago, IL 60611, USA; (N.H.); (L.B.)
- Division of Endocrinology, Department of Pediatrics, Northwestern University Feinberg School of Medicine, Chicago, IL 60611, USA
| |
Collapse
|
31
|
Al-Atawi S. Three-dimensional bioprinting in ophthalmic care. Int J Ophthalmol 2023; 16:1702-1711. [PMID: 37854366 PMCID: PMC10559024 DOI: 10.18240/ijo.2023.10.21] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Accepted: 05/04/2023] [Indexed: 10/20/2023] Open
Abstract
Three-dimensional (3D) bioprinting is widely used in ophthalmic clinic, including in diagnosis, surgery, prosthetics, medications, drug development and delivery, and medical education. Articles published in 2011-2022 into bioinks, printing technologies, and bioprinting applications in ophthalmology were reviewed and the strengths and limitations of bioprinting in ophthalmology highlighted. The review highlighted the trade-offs of printing technologies and bioinks in respect to, among others, material type cost, throughput, gelation technique, cell density, cell viability, resolution, and printing speed. There is already widespread ophthalmological application of bioprinting outside clinical settings, including in educational modelling, retinal imaging/visualization techniques and drug design/testing. In clinical settings, bioprinting has already found application in pre-operatory planning. Even so, the findings showed that even with its immense promise, actual translation to clinical applications remains distant, but relatively closer for the corneal (except stromal) tissues, epithelium, endothelium, and conjunctiva, than it was for the retina. This review similarly reflected on the critical on the technical, practical, ethical, and cost barrier to rapid progress of bioprinting in ophthalmology, including accessibility to the most sophisticated bioprinting technologies, choice, and suitability of bioinks, tissue viability and storage conditions. The extant research is encouraging, but more work is clearly required for the push towards clinical translation of research.
Collapse
Affiliation(s)
- Saleha Al-Atawi
- Al-baha University, Applied Medical Science, Al-Aqiaq, AlBaha 4781, Saudi Arabia
| |
Collapse
|
32
|
Xue Q, Hu H, Wang W, Li Q, Ma L, Ma J, Ye C, Yang H, Zhang B. Liquid-Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute. Adv Healthc Mater 2023; 12:e2300600. [PMID: 37543431 DOI: 10.1002/adhm.202300600] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 06/25/2023] [Indexed: 08/07/2023]
Abstract
Compared to traditional biological lenses that are used to correct optical systems, such as contact lenses, vision correction surgery, and corneal and lens replacement, 3D printed biological lenses offer a customizable solutions. However, the layer-by-layer principle of 3D printing leads to a staircase effect, which cannot meet the critical requirements of surface quality during the manufacturing process of biological lens, particularly with soft materials. Here, a liquid-phase printing strategy and a surface tension-dependent (STD) post-processing method are proposed that use the surface tension of the liquid to reconstruct the air-liquid interface. This eliminates the staircase effect caused by the stacking of units during 3D printing. The coordinates of integrated printing enable high-accuracy shape control of soft materials. Using a typical biological lens as an example, this method improves the surface quality of printed lamellar corneal substitutes (LCS) from ±20.0 to ±0.2 µm and reduces thickness feature size from ±500 to ±150 µm. This approach can match human cornea curvature and thickness, achieving ≈85% visible light transmittance and biocompatibility. Liquid-phase 3D printed biological lenses outperform molded ones in animal experiments. This method can advance artificial biological lens printing research and holds promise for future clinical applications.
Collapse
Affiliation(s)
- Qian Xue
- State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China
| | - Hanyi Hu
- Zhejiang University School of Medicine Sir Run Run Shaw Hospital, Hangzhou, 310016, China
- School of Medicine, Zhejiang University, Hangzhou, 310058, China
| | - Weiwei Wang
- Zhejiang University School of Medicine Sir Run Run Shaw Hospital, Hangzhou, 310016, China
- School of Medicine, Zhejiang University, Hangzhou, 310058, China
| | - Qi Li
- State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China
| | - Liang Ma
- State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China
| | - Jien Ma
- College of Electrical Engineering, Zhejiang University, Hangzhou, 310058, China
| | - Cathy Ye
- Institute of Biomedical Engineering, University of Oxford, Oxford, OX3 7DQ, UK
| | - Huayong Yang
- State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China
| | - Bin Zhang
- State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China
| |
Collapse
|
33
|
Wang X, Elbahrawi RT, Abdukadir AM, Ali ZM, Chan V, Corridon PR. A proposed model of xeno-keratoplasty using 3D printing and decellularization. Front Pharmacol 2023; 14:1193606. [PMID: 37799970 PMCID: PMC10548234 DOI: 10.3389/fphar.2023.1193606] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2023] [Accepted: 09/06/2023] [Indexed: 10/07/2023] Open
Abstract
Corneal opacity is a leading cause of vision impairment and suffering worldwide. Transplantation can effectively restore vision and reduce chronic discomfort. However, there is a considerable shortage of viable corneal graft tissues. Tissue engineering may address this issue by advancing xeno-keratoplasty as a viable alternative to conventional keratoplasty. In particular, livestock decellularization strategies offer the potential to generate bioartificial ocular prosthetics in sufficient supply to match existing and projected needs. To this end, we have examined the best practices and characterizations that have supported the current state-of-the-art driving preclinical and clinical applications. Identifying the challenges that delimit activities to supplement the donor corneal pool derived from acellular scaffolds allowed us to hypothesize a model for keratoprosthesis applications derived from livestock combining 3D printing and decellularization.
Collapse
Affiliation(s)
- Xinyu Wang
- Biomedical Engineering and Healthcare Engineering Innovation Center, Khalifa University, Abu Dhabi, United Arab Emirates
- Department of Immunology and Physiology, College of Medicine and Health Sciences, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Rawdah Taha Elbahrawi
- Department of Immunology and Physiology, College of Medicine and Health Sciences, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Azhar Mohamud Abdukadir
- Department of Immunology and Physiology, College of Medicine and Health Sciences, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Zehara Mohammed Ali
- Department of Immunology and Physiology, College of Medicine and Health Sciences, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Vincent Chan
- Biomedical Engineering and Healthcare Engineering Innovation Center, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Peter R. Corridon
- Biomedical Engineering and Healthcare Engineering Innovation Center, Khalifa University, Abu Dhabi, United Arab Emirates
- Department of Immunology and Physiology, College of Medicine and Health Sciences, Khalifa University, Abu Dhabi, United Arab Emirates
- Center for Biotechnology, Khalifa University, Abu Dhabi, United Arab Emirates
- Hleathcare, Engineering and Innovation Center, Khalifa University, Abu Dhabi, United Arab Emirates
| |
Collapse
|
34
|
Chen Z, Liu X, You J, Tomaskovic-Crook E, Yue Z, Talaei A, Sutton G, Crook J, Wallace G. Electro-compacted collagen for corneal epithelial tissue engineering. J Biomed Mater Res A 2023; 111:1151-1160. [PMID: 36651651 DOI: 10.1002/jbm.a.37500] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2022] [Revised: 12/15/2022] [Accepted: 01/02/2023] [Indexed: 01/19/2023]
Abstract
Bioengineered corneal substitutes offer a solution to the shortage of donor corneal tissue worldwide. As one of the major structural components of the cornea, collagen has shown great potential for tissue-engineered cornea substitutes. Herein, free-standing collagen membranes fabricated using electro-compaction were assessed in corneal bioengineering application by comparing them with nonelectro-compacted collagen (NECC). The well-organized and biomimetic fibril structure resulted in a significant improvement in mechanical properties. A 10-fold increase in tensile and compressive modulus was recorded when compared with NECC membranes. In addition to comparable transparency in the visible light range, the glucose permeability of the electro-compacted collagen (ECC) membrane is higher than that of the native human cornea. Human corneal epithelial cells adhere and proliferate well on the ECC membrane, with a large cell contact area observed. The as-described ECC has appropriate structural, topographic, mechanical, optical, glucose permeable, and cell support properties to provide a platform for a bioengineered cornea; including the outer corneal epithelium and potentially deeper corneal tissues.
Collapse
Affiliation(s)
- Zhi Chen
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| | - Xiao Liu
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| | - Jingjing You
- Lions New South Wales Eye Bank and New South Wales Bone Bank, New South Wales Organ and Tissue Donation Service, Sydney, New South Wales, Australia
| | - Eva Tomaskovic-Crook
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
- Arto Hardy Family Biomedical Innovation Hub, Chris O'Brien Lifehouse, Camperdown, New South Wales, Australia
- School of Medical Sciences, Faculty of Medicine and Health, The University of Sydney, Sydney, New South Wales, Australia
| | - Zhilian Yue
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| | - Alireza Talaei
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| | - Gerard Sutton
- Lions New South Wales Eye Bank and New South Wales Bone Bank, New South Wales Organ and Tissue Donation Service, Sydney, New South Wales, Australia
- Save Sight Institute, University of Sydney, Sydney, New South Wales, Australia
- Chatswood Clinic, Vision Eye Institute, Sydney, New South Wales, Australia
- Sydney Medical School, University of Sydney, Sydney, New South Wales, Australia
| | - Jeremy Crook
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
- Arto Hardy Family Biomedical Innovation Hub, Chris O'Brien Lifehouse, Camperdown, New South Wales, Australia
- School of Medical Sciences, Faculty of Medicine and Health, The University of Sydney, Sydney, New South Wales, Australia
| | - Gordon Wallace
- ARC Centre of Excellence for Electromaterials Science, Intelligent Polymer Research Institute, AIIM Facility, Innovation Campus, University of Wollongong, Fairy Meadow, New South Wales, Australia
| |
Collapse
|
35
|
Soleimani M, Ebrahimi Z, Ebrahimi KS, Farhadian N, Shahlaei M, Cheraqpour K, Ghasemi H, Moradi S, Chang AY, Sharifi S, Baharnoori SM, Djalilian AR. Application of biomaterials and nanotechnology in corneal tissue engineering. J Int Med Res 2023; 51:3000605231190473. [PMID: 37523589 PMCID: PMC10392709 DOI: 10.1177/03000605231190473] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/02/2023] Open
Abstract
Corneal diseases are among the most common causes of blindness worldwide. Regardless of the etiology, corneal opacity- or globe integrity-threatening conditions may necessitate corneal replacement procedures. Several procedure types are currently available to address these issues, based on the complexity and extent of injury. Corneal allograft or keratoplasty is considered to be first-line treatment in many cases. However, a significant proportion of the world's population are reported to have no access to this option due to limitations in donor preparation. Thus, providing an appropriate, safe, and efficient synthetic implant (e.g., artificial cornea) may revolutionize this field. Nanotechnology, with its potential applications, has garnered a lot of recent attention in this area, however, there is seemingly a long way to go. This narrative review provides a brief overview of the therapeutic interventions for corneal pathologies, followed by a summary of current biomaterials used in corneal regeneration and a discussion of the nanotechnologies that can aid in the production of superior implants.
Collapse
Affiliation(s)
- Mohammad Soleimani
- Eye Research Center, Farabi Eye Hospital, Tehran University of Medical Sciences, Tehran, Iran
- Department of Ophthalmology and Visual Sciences, University of Illinois at Chicago, Chicago, Illinois, USA
| | - Zohreh Ebrahimi
- Eye Research Center, Farabi Eye Hospital, Tehran University of Medical Sciences, Tehran, Iran
| | - Kosar Sadat Ebrahimi
- Nano Drug Delivery Research Center, Health Technology Institute, Kermanshah University of Medical Sciences, Kermanshah, Iran
| | - Negin Farhadian
- Substance Abuse Research Center, Health Institute, Kermanshah University of Medical Sciences, Kermanshah, Iran
| | - Mohsen Shahlaei
- Nano Drug Delivery Research Center, Health Technology Institute, Kermanshah University of Medical Sciences, Kermanshah, Iran
| | - Kasra Cheraqpour
- Eye Research Center, Farabi Eye Hospital, Tehran University of Medical Sciences, Tehran, Iran
| | - Hamed Ghasemi
- Eye Research Center, Farabi Eye Hospital, Tehran University of Medical Sciences, Tehran, Iran
| | - Sajad Moradi
- Nano Drug Delivery Research Center, Health Technology Institute, Kermanshah University of Medical Sciences, Kermanshah, Iran
| | - Arthur Y Chang
- Department of Ophthalmology and Visual Sciences, University of Illinois at Chicago, Chicago, Illinois, USA
| | - Sina Sharifi
- Schepens Eye Research Institute, Massachusetts Eye and Ear Infirmary, Boston, MA, USA
| | - Seyed Mahbod Baharnoori
- Eye Research Center, Farabi Eye Hospital, Tehran University of Medical Sciences, Tehran, Iran
- Department of Ophthalmology and Visual Sciences, University of Illinois at Chicago, Chicago, Illinois, USA
| | - Ali R Djalilian
- Department of Ophthalmology and Visual Sciences, University of Illinois at Chicago, Chicago, Illinois, USA
| |
Collapse
|
36
|
Jiang L, Dong X, Chen L, Han R, Hao P, Wang L, Gao J, Chen X, Li X. A composite hydrogel membrane with shape and water retention for corneal tissue engineering. Heliyon 2023; 9:e17950. [PMID: 37539164 PMCID: PMC10395283 DOI: 10.1016/j.heliyon.2023.e17950] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 07/03/2023] [Accepted: 07/03/2023] [Indexed: 08/05/2023] Open
Abstract
Tissue engineering (TE) cornea is one of the most potential alternatives to the shortage of corneal donors in cornea transplantation. Sodium alginate (SA) hydrogel is commonly used as scaffold in TE. Herein, we present an approach to construct a composite hydrogel, which with SA fiber skeleton structure for shape retention and gelatin surface modification for water retention. The light transmittance, water retention rate, and swelling rate of hydrogels were characterized, and the tensile mechanical properties were also investigated. Keratinocytes were treated with material extract liquor and the results showed that the gelatin modified SA hydrogel has good cytocompatibility. Furthermore, human corneal stromal fibroblasts (HCSFs) from the lenticules were implanted on the surface of gels, and the SA-gelatin hydrogel significantly improved the adhesion and spreading of HCSFs. Finally, we discussed the improvement and application prospect of the composite hydrogel as cornea equivalents.
Collapse
Affiliation(s)
- Li Jiang
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Xiaoli Dong
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Luxia Chen
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Ruifang Han
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Pen Hao
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Liming Wang
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Juan Gao
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Xi Chen
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| | - Xuan Li
- Clinical Collage of Ophthalmology, Tianjin Medical University, Tianjin, China
- Tianjin Key Laboratory of Ophthalmology and Visual Science, Tianjin Eye Institute, Tianjin Eye Hospital, Tianjin, China
- Nankai University Affiliated Eye Hospital, Tianjin, China
| |
Collapse
|
37
|
Boix-Lemonche G, Nagymihaly RM, Niemi EM, Josifovska N, Johansen S, Moe MC, Scholz H, Petrovski G. Intracorneal Implantation of 3D Bioprinted Scaffolds Containing Mesenchymal Stromal Cells Using Femtosecond-Laser-Assisted Intrastromal Keratoplasty. Macromol Biosci 2023; 23:e2200422. [PMID: 36729619 DOI: 10.1002/mabi.202200422] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2022] [Revised: 12/27/2022] [Indexed: 02/03/2023]
Abstract
Injury of the cornea is a complex biological process. Regeneration of the corneal stroma can be facilitated by the presence of mesenchymal stromal cells (MSCs) and application of tissue equivalents. A new tissue-engineering strategy for corneal stroma regeneration is presented using cellularized 3D bioprinted hydrogel constructs implanted into organ cultured porcine corneas using femtosecond laser-assisted intrastromal keratoplasty. The ex vivo cultured, MSC-loaded 3D bioprinted structures remain intact, support cell survival, and contain de novo synthesized extracellular matrix components and migrating cells throughout the observation period. At day 14 postimplantation, the cellularized tissue equivalents contain few or no cells, as demonstrated by optical coherence tomography imaging and immunofluorescent staining. This study successfully combines a laboratory-based method with modern, patient-care practice to produce a cell-laden tissue equivalent for corneal implantation. Optimal bioink composition and cellularization of tissue equivalents are essential in fine-tuning a method to promote the current technique as a future treatment modality.
Collapse
Affiliation(s)
- Gerard Boix-Lemonche
- Center for Eye Research and Innovative Diagnostics, Department of Ophthalmology, Institute of Clinical Medicine, Faculty of Medicine, University of Oslo, Oslo, 0450, Norway
| | | | - Essi M Niemi
- Vascular Biology and Surgery Group, Institute for Surgical Research and Department of Vascular Surgery, Oslo University Hospital, Post Box 4950, Oslo, Nydalen, N-0424, Norway
- Hybrid Technology Hub, Centre of Excellence, Institute of Basic Medical Sciences, University of Oslo, Oslo, 0349, Norway
| | - Natasha Josifovska
- Center for Eye Research and Innovative Diagnostics, Department of Ophthalmology, Institute of Clinical Medicine, Faculty of Medicine, University of Oslo, Oslo, 0450, Norway
| | | | - Morten C Moe
- Center for Eye Research and Innovative Diagnostics, Department of Ophthalmology, Institute of Clinical Medicine, Faculty of Medicine, University of Oslo, Oslo, 0450, Norway
- Department of Ophthalmology, Oslo University Hospital, Oslo, 0450, Norway
| | - Hanne Scholz
- Hybrid Technology Hub, Centre of Excellence, Institute of Basic Medical Sciences, University of Oslo, Oslo, 0349, Norway
- Cell Transplantation and Tissue Engineering Group, Institute for Surgical Research and Section for Transplant Surgery, Oslo University Hospital, Post Box 4950, Oslo, Nydalen, N-0424, Norway
| | - Goran Petrovski
- Center for Eye Research and Innovative Diagnostics, Department of Ophthalmology, Institute of Clinical Medicine, Faculty of Medicine, University of Oslo, Oslo, 0450, Norway
- Department of Ophthalmology, Oslo University Hospital, Oslo, 0450, Norway
- Department of Ophthalmology, University of Split School of Medicine and University Hospital Centre, Split, Croatia
| |
Collapse
|
38
|
Li Q, Wong HL, Ip YL, Chu WY, Li MS, Saha C, Shih KC, Chan YK. Current microfluidic platforms for reverse engineering of cornea. Mater Today Bio 2023; 20:100634. [PMID: 37139464 PMCID: PMC10149412 DOI: 10.1016/j.mtbio.2023.100634] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2022] [Revised: 04/04/2023] [Accepted: 04/10/2023] [Indexed: 05/05/2023] Open
Abstract
According to the World Health Organization, corneal blindness constitutes 5.1% of global blindness population. Surgical outcomes have been improved significantly in the treatment of corneal blindness. However, corneal transplantation is limited by global shortage of donor tissue, prompting researchers to explore alternative therapies such as novel ocular pharmaceutics to delay corneal disease progression. Animal models are commonly adopted for investigating pharmacokinetics of ocular drugs. However, this approach is limited by physiological differences in the eye between animals and human, ethical issues and poor bench-to-bedside translatability. Cornea-on-a-chip (CoC) microfluidic platforms have gained great attention as one of the advanced in vitro strategies for constructing physiologically representative corneal models. With significant improvements in tissue engineering technology, CoC integrates corneal cells with microfluidics to recapitulate human corneal microenvironment for the study of corneal pathophysiological changes and evaluation of ocular drugs. Such model, in complement to animal studies, can potentially accelerate translational research, in particular the pre-clinical screening of ophthalmic medication, driving clinical treatment advancement for corneal diseases. This review provides an overview of engineered CoC platforms with respect to their merits, applications, and technical challenges. Emerging directions in CoC technology are also proposed for further investigations, to accentuate preclinical obstacles in corneal research.
Collapse
Affiliation(s)
- Qinyu Li
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Ho Lam Wong
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Yan Lam Ip
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Wang Yee Chu
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Man Shek Li
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Chinmoy Saha
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Kendrick Co Shih
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| | - Yau Kei Chan
- Department of Ophthalmology, LKS Faculty of Medicine, The University of Hong Kong, 999077, Hong Kong, China
| |
Collapse
|
39
|
Noroozi R, Arif ZU, Taghvaei H, Khalid MY, Sahbafar H, Hadi A, Sadeghianmaryan A, Chen X. 3D and 4D Bioprinting Technologies: A Game Changer for the Biomedical Sector? Ann Biomed Eng 2023:10.1007/s10439-023-03243-9. [PMID: 37261588 DOI: 10.1007/s10439-023-03243-9] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Accepted: 05/14/2023] [Indexed: 06/02/2023]
Abstract
Bioprinting is an innovative and emerging technology of additive manufacturing (AM) and has revolutionized the biomedical sector by printing three-dimensional (3D) cell-laden constructs in a precise and controlled manner for numerous clinical applications. This approach uses biomaterials and varying types of cells to print constructs for tissue regeneration, e.g., cardiac, bone, corneal, cartilage, neural, and skin. Furthermore, bioprinting technology helps to develop drug delivery and wound healing systems, bio-actuators, bio-robotics, and bio-sensors. More recently, the development of four-dimensional (4D) bioprinting technology and stimuli-responsive materials has transformed the biomedical sector with numerous innovations and revolutions. This issue also leads to the exponential growth of the bioprinting market, with a value over billions of dollars. The present study reviews the concepts and developments of 3D and 4D bioprinting technologies, surveys the applications of these technologies in the biomedical sector, and discusses their potential research topics for future works. It is also urged that collaborative and valiant efforts from clinicians, engineers, scientists, and regulatory bodies are needed for translating this technology into the biomedical, pharmaceutical, and healthcare systems.
Collapse
Affiliation(s)
- Reza Noroozi
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Zia Ullah Arif
- Department of Mechanical Engineering, University of Management & Technology, Lahore, Sialkot Campus, Lahore, 51041, Pakistan
| | - Hadi Taghvaei
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Muhammad Yasir Khalid
- Department of Aerospace Engineering, Khalifa University of Science and Technology, PO Box: 127788, Abu Dhabi, United Arab Emirates
| | - Hossein Sahbafar
- School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
| | - Amin Hadi
- Cellular and Molecular Research Center, Yasuj University of Medical Sciences, Yasuj, Iran
| | - Ali Sadeghianmaryan
- Postdoctoral Researcher Fellow at Department of Biomedical Engineering, University of Memphis, Memphis, TN, USA.
- Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK, S7N5A9, Canada.
| | - Xiongbiao Chen
- Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK, S7N5A9, Canada
| |
Collapse
|
40
|
Surovtseva MA, Kim II, Bondarenko NA, Lykov AP, Krasner KY, Chepeleva EV, Bgatova NP, Trunov AN, Chernykh VV, Poveshchenko OV. Derivation of Human Corneal Keratocytes from ReLEx SMILE Lenticules for Cell Therapy and Tissue Engineering. Int J Mol Sci 2023; 24:ijms24108828. [PMID: 37240176 DOI: 10.3390/ijms24108828] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2023] [Revised: 05/04/2023] [Accepted: 05/11/2023] [Indexed: 05/28/2023] Open
Abstract
Fibroblasts isolated and expanded from ReLEx SMILE lenticules can be a source of human keratocytes. Since corneal keratocytes are quiescent cells, it is difficult to expand them in vitro in suitable numbers for clinical and experimental use. In the present study, this problem was solved by isolating and growing corneal fibroblasts (CFs) with a high proliferative potential and their reversion to keratocytes in a selective serum-free medium. Fibroblasts reversed into keratocytes (rCFs) had a dendritic morphology and ultrastructural signs of activation of protein synthesis and metabolism. The cultivation of CFs in a medium with 10% FCS and their reversion into keratocytes was not accompanied by the induction of myofibroblasts. After reversion, the cells spontaneously formed spheroids and expressed keratocan and lumican markers, but not mesenchymal ones. The rCFs had low proliferative and migratory activity, and their conditioned medium contained a low level of VEGF. CF reversion was not accompanied by a change with the levels of IGF-1, TNF-alpha, SDF-1a, and sICAM-1. In the present study, it has been demonstrated that fibroblasts from ReLEx SMILE lenticules reverse into keratocytes in serum-free KGM, maintaining the morphology and functional properties of primary keratocytes. These keratocytes have a potential for tissue engineering and cell therapy of various corneal pathologies.
Collapse
Affiliation(s)
- Maria A Surovtseva
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Irina I Kim
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Natalia A Bondarenko
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Alexander P Lykov
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Kristina Yu Krasner
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
- Novosibirsk Branch of S. Fedorov Eye Microsurgery Federal State Institution, 10 Kalkhidskaya Str., 630096 Novosibirsk, Russia
| | - Elena V Chepeleva
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Nataliya P Bgatova
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| | - Alexander N Trunov
- Novosibirsk Branch of S. Fedorov Eye Microsurgery Federal State Institution, 10 Kalkhidskaya Str., 630096 Novosibirsk, Russia
| | - Valery V Chernykh
- Novosibirsk Branch of S. Fedorov Eye Microsurgery Federal State Institution, 10 Kalkhidskaya Str., 630096 Novosibirsk, Russia
| | - Olga V Poveshchenko
- Research Institute of Clinical and Experimental Lymphology-Branch of the Institute of Cytology and Genetics, Siberian Branch of Russian Academy of Sciences, 2 Timakova Str., 630060 Novosibirsk, Russia
| |
Collapse
|
41
|
Xu Y, Liu J, Song W, Wang Q, Sun X, Zhao Q, Huang Y, Li H, Peng Y, Yuan J, Ji B, Ren L. Biomimetic Convex Implant for Corneal Regeneration Through 3D Printing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2205878. [PMID: 36775872 PMCID: PMC10104657 DOI: 10.1002/advs.202205878] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/10/2022] [Revised: 01/24/2023] [Indexed: 06/18/2023]
Abstract
Blindness caused by corneal damage affects millions of people worldwide, and this number continues to rise. However, rapid epithelization and a stable epithelium process are the two biggest challenges for traditional corneal materials. These processes are related to corneal curvature, which is an important factor in determination of the corneal healing process and epithelial behavior during corneal damage. In this study, smooth 3D-printed convex corneal implants based on gelatin methacrylate and collagen are generated. As epithelium distribution and adhesion vary in different regions of the natural cornea, this work separates the surfaces into four regions and studies how cells sense topological cues on curvature. It is found that rabbit corneal epithelial cells (RCECs) seeded on steeper slope gradient surfaces on convex structures result in more aligned cell organization and tighter cell-substrate adhesion, which can also be verified through finite element simulation and signaling pathway analysis. In vivo transplantation of convex implants result in a better fit with adjacent tissue and stronger cell adhesion than flat implants, thereby accelerating corneal epithelialization and promoting collagen fibers and neural regeneration within 180 days. Taken together, printed convex corneal implants that facilitate corneal regeneration may offer a translational strategy for the treatment of corneal damage.
Collapse
Affiliation(s)
- Yingni Xu
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Jia Liu
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Wenjing Song
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Qianchun Wang
- Wenzhou InstituteUniversity of Chinese Academy of SciencesWenzhou325001P. R. China
| | - Xiaomin Sun
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Qi Zhao
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Yongrui Huang
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Haochen Li
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
| | - Yuehai Peng
- National Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
- Guangzhou Proud Seeing Biotechnology Co., LtdGuangzhou510320P. R. China
| | - Jin Yuan
- State Key Laboratory of OphthalmologyZhongshan Ophthalmic CenterSun Yat‐sen UniversityGuangzhou510623P. R. China
| | - Baohua Ji
- Institute of Biomechanics and Applications, Department of Engineering MechanicsZhejiang UniversityHangzhou310027P. R. China
| | - Li Ren
- School of Materials Science and EngineeringNational Engineering Research Center for Tissue Restoration and ReconstructionKey Laboratory of Biomedical Engineering of Guangdong ProvinceKey Laboratory of Biomedical Materials and Engineering of the Ministry of EducationInnovation Center for Tissue Restoration and ReconstructionSouth China University of TechnologyGuangzhou510006P. R. China
- Bioland LaboratoryGuangzhou Regenerative Medicine and Health Guangdong LaboratoryGuangzhou510005P. R. China
| |
Collapse
|
42
|
Pan J, Zhang W, Zhu J, Tan J, Huang Y, Mo K, Tong Y, Xie Z, Ke Y, Zheng H, Ouyang H, Shi X, Gao L. Arrested Phase Separation Enables High-Performance Keratoprostheses. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2207750. [PMID: 36680510 DOI: 10.1002/adma.202207750] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 12/24/2022] [Indexed: 06/17/2023]
Abstract
Corneal transplantation is impeded by donor shortages, immune rejection, and ethical reservations. Pre-made cornea prostheses (keratoprostheses) offer a proven option to alleviate these issues. Ideal keratoprostheses must possess optical clarity and mechanical robustness, but also high permeability, processability, and recyclability. Here, it is shown that rationally controlling the extent of arrested phase separation can lead to optimized multiscale structure that reconciles permeability and transparency, a previously conflicting goal by common pore-forming strategies. The process is simply accomplished by hydrothermally treating a dense and transparent hydrophobic association hydrogel. The examination of multiscale structure evolution during hydrothermal treatment reveals that the phase separation with upper miscibility gap evolves to confer time-dependent pore growth due to slow dynamics of polymer-rich phase which is close to vitrification. Such a process can render a combination of multiple desired properties that equal or surpass those of the state-of-the-art keratoprostheses. In vivo tests confirm that the keratoprosthesis can effectively repair corneal perforation and restore a transparent cornea with treatment outcomes akin to that of allo-keratoplasty. The keratoprosthesis is easy to access and convenient to carry, and thus would be an effective temporary substitute for a corneal allograft in emergency conditions.
Collapse
Affiliation(s)
- Jiageng Pan
- School of Chemical Engineering and Light Industry, Gangdong University of Technology, Guangzhou, 510006, P. R. China
| | - Wang Zhang
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Jin Zhu
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Jieying Tan
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Ying Huang
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Kunlun Mo
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Yan Tong
- School of Materials, Sun Yat-sen University, Guangzhou, 510060, P. R. China
| | - Zhenhua Xie
- Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, 100049, P. R. China
- Spallation Neutron Source Science Center, Dongguan, 523803, P. R. China
| | - Yubin Ke
- Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, 100049, P. R. China
- Spallation Neutron Source Science Center, Dongguan, 523803, P. R. China
| | - Huade Zheng
- School of Materials Science and Engineering, South China University of Technology, Guanghzhou, 510640, P. R. China
| | - Hong Ouyang
- State Key Laboratory of Ophthalmology, Zhongshan Ophthalmic Center, Sun Yat-sen University, Guangdong Provincial Key Laboratory of Ophthalmology and Visual Science, Guangzhou, 510060, P. R. China
| | - Xuetao Shi
- School of Materials Science and Engineering, South China University of Technology, Guanghzhou, 510640, P. R. China
| | - Liang Gao
- School of Chemical Engineering and Light Industry, Gangdong University of Technology, Guangzhou, 510006, P. R. China
- Jieyang Branch of Chemistry and Chemical Engineering Guangdong Laboratory (Rongjiang Laboratory), Jieyang, 515200, P. R. China
| |
Collapse
|
43
|
Li S, Ma X, Zhang Y, Qu Y, Wang L, Ye L. Applications of hydrogel materials in different types of corneal wounds. Surv Ophthalmol 2023:S0039-6257(23)00040-1. [PMID: 36854372 DOI: 10.1016/j.survophthal.2023.02.005] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2022] [Revised: 02/20/2023] [Accepted: 02/21/2023] [Indexed: 02/27/2023]
Abstract
Severe corneal injury can lead to a decrease in light transmission and even blindness. Currently, corneal transplantation has been applied as the primary treatment for corneal blindness; however, the worldwide shortage of suitable corneal donor tissue means that a large proportion of patients have no access to corneal transplants. This situation has contributed to the rapid development of various corneal substitutes. The development and optimization of novel hydrogels that aim to replace partial or full-thickness pathological corneas have advanced in the last decade. Meanwhile, with the help of 3D bioprinting technology, hydrogel materials can be molded to a refined and controllable shape, attracting many scientists to the field of corneal reconstruction research. Although hydrogels are not yet available as a substitute for traditional clinical methods of corneal diseases, their rapid development makes us confident that they will be in the near future. We summarize the application of hydrogel materials for various types of corneal injuries frequently encountered in clinical practice, especially focusing on animal experiments and preclinical studies. Finally, we discuss the development and achievements of 3D bioprinting in the treatment of corneal injury.
Collapse
Affiliation(s)
- Shixu Li
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China
| | - Xudai Ma
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China
| | - Yongxin Zhang
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China
| | - Yunhao Qu
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China
| | - Ling Wang
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China.
| | - Lin Ye
- Shenzhen Eye Hospital, Jinan University, Shenzhen, China; Shenzhen Eye Institute, Shenzhen, China.
| |
Collapse
|
44
|
Jia S, Bu Y, Lau DSA, Lin Z, Sun T, Lu WW, Lu S, Ruan C, Chan CHJ. Advances in 3D bioprinting technology for functional corneal reconstruction and regeneration. Front Bioeng Biotechnol 2023; 10:1065460. [PMID: 36686254 PMCID: PMC9852906 DOI: 10.3389/fbioe.2022.1065460] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2022] [Accepted: 12/19/2022] [Indexed: 01/09/2023] Open
Abstract
Corneal transplantation constitutes one of the major treatments in severe cases of corneal diseases. The lack of cornea donors as well as other limitations of corneal transplantation necessitate the development of artificial corneal substitutes. Biosynthetic cornea model using 3D printing technique is promising to generate artificial corneal structure that can resemble the structure of the native human cornea and is applicable for regenerative medicine. Research on bioprinting artificial cornea has raised interest into the wide range of materials and cells that can be utilized as bioinks for optimal clarity, biocompatibility, and tectonic strength. With continued advances in biomaterials science and printing technology, it is believed that bioprinted cornea will eventually achieve a level of clinical functionality and practicality as to replace donated corneal tissues, with their associated limitations such as limited or unsteady supply, and possible infectious disease transmission. Here, we review the literature on bioprinting strategies, 3D corneal modelling, material options, and cellularization strategies in relation to keratoprosthesis design. The progress, limitations and expectations of recent cases of 3D bioprinting of artifial cornea are discussed. An outlook on the rise of 3D bioprinting in corneal reconstruction and regeneration is provided.
Collapse
Affiliation(s)
- Shuo Jia
- Department of Ophthalmology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
| | - Yashan Bu
- Department of Ophthalmology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
| | - Dzi-Shing Aaron Lau
- Department of Orthopedic and Traumatology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
| | - Zhizhen Lin
- Department of Ophthalmology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
| | - Tianhao Sun
- Department of Orthopedic and Traumatology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
- Shenzhen Gangqing Biomedical Technology Co. Ltd, Shenzhen, China
| | - Weijia William Lu
- Department of Orthopedic and Traumatology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
- Research Center for Human Tissues and Organs Degeneration, Institute of Biomedicine and Biotechnology, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, China
| | - Sheng Lu
- Department of Orthopedic Surgery, The First People’s Hospital of Yunnan Province, Kunming, China
| | - Changshun Ruan
- Research Center for Human Tissues and Organs Degeneration, Institute of Biomedicine and Biotechnology, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, China
| | - Cheuk-Hung Jonathan Chan
- Department of Ophthalmology, LKS Faculty of Medicine, University of Hong Kong, Hong Kong, Hong Kong SAR, China
| |
Collapse
|
45
|
Yang P, Ju Y, Hu Y, Xie X, Fang B, Lei L. Emerging 3D bioprinting applications in plastic surgery. Biomater Res 2023; 27:1. [PMID: 36597149 PMCID: PMC9808966 DOI: 10.1186/s40824-022-00338-7] [Citation(s) in RCA: 36] [Impact Index Per Article: 36.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Accepted: 12/14/2022] [Indexed: 01/04/2023] Open
Abstract
Plastic surgery is a discipline that uses surgical methods or tissue transplantation to repair, reconstruct and beautify the defects and deformities of human tissues and organs. Three-dimensional (3D) bioprinting has gained widespread attention because it enables fine customization of the implants in the patient's surgical area preoperatively while avoiding some of the adverse reactions and complications of traditional surgical approaches. In this paper, we review the recent research advances in the application of 3D bioprinting in plastic surgery. We first introduce the printing process and basic principles of 3D bioprinting technology, revealing the advantages and disadvantages of different bioprinting technologies. Then, we describe the currently available bioprinting materials, and dissect the rationale for special dynamic 3D bioprinting (4D bioprinting) that is achieved by varying the combination strategy of bioprinting materials. Later, we focus on the viable clinical applications and effects of 3D bioprinting in plastic surgery. Finally, we summarize and discuss the challenges and prospects for the application of 3D bioprinting in plastic surgery. We believe that this review can contribute to further development of 3D bioprinting in plastic surgery and provide lessons for related research.
Collapse
Affiliation(s)
- Pu Yang
- grid.452708.c0000 0004 1803 0208Department of Plastic and Aesthetic (Burn) Surgery, The Second Xiangya Hospital, Central South University, Changsha, 410011 People’s Republic of China
| | - Yikun Ju
- grid.452708.c0000 0004 1803 0208Department of Plastic and Aesthetic (Burn) Surgery, The Second Xiangya Hospital, Central South University, Changsha, 410011 People’s Republic of China
| | - Yue Hu
- grid.449525.b0000 0004 1798 4472School of Clinical Medicine, North Sichuan Medical College, Nanchong, 637000 People’s Republic of China
| | - Xiaoyan Xie
- grid.452708.c0000 0004 1803 0208Department of Stomatology, The Second Xiangya Hospital, Central South University, Changsha, 410011 People’s Republic of China
| | - Bairong Fang
- grid.452708.c0000 0004 1803 0208Department of Plastic and Aesthetic (Burn) Surgery, The Second Xiangya Hospital, Central South University, Changsha, 410011 People’s Republic of China
| | - Lanjie Lei
- grid.263826.b0000 0004 1761 0489School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096 People’s Republic of China
| |
Collapse
|
46
|
Balters L, Reichl S. 3D bioprinting of corneal models: A review of the current state and future outlook. J Tissue Eng 2023; 14:20417314231197793. [PMID: 37719307 PMCID: PMC10504850 DOI: 10.1177/20417314231197793] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2023] [Accepted: 08/13/2023] [Indexed: 09/19/2023] Open
Abstract
The cornea is the outermost layer of the eye and serves to protect the eye and enable vision by refracting light. The need for cornea organ donors remains high, and the demand for an artificial alternative continues to grow. 3D bioprinting is a promising new method to create artificial organs and tissues. 3D bioprinting offers the precise spatial arrangement of biomaterials and cells to create 3D constructs. As the cornea is an avascular tissue which makes it more attractive for 3D bioprinting, it could be one of the first tissues to be made fully functional via 3D bioprinting. This review discusses the most common 3D bioprinting technologies and biomaterials used for 3D bioprinting corneal models. Additionally, the current state of 3D bioprinted corneal models, especially specific characteristics such as light transmission, biomechanics, and marker expression, and in vivo studies are discussed. Finally, the current challenges and future prospects are presented.
Collapse
Affiliation(s)
- Leon Balters
- Institute of Pharmaceutical Technology and Biopharmaceutics, Technische Universität Braunschweig, Braunschweig, Germany
| | - Stephan Reichl
- Institute of Pharmaceutical Technology and Biopharmaceutics, Technische Universität Braunschweig, Braunschweig, Germany
| |
Collapse
|
47
|
Dadhich P, Kumar P, Roy A, Bitar KN. Advances in 3D Printing Technology for Tissue Engineering. Regen Med 2023. [DOI: 10.1007/978-981-19-6008-6_9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023] Open
|
48
|
Blanco-Elices C, Morales-Álvarez C, Chato-Astrain J, González-Gallardo C, Ávila-Fernández P, Campos F, Carmona R, Martín-Piedra MÁ, Garzón I, Alaminos M. Development of stromal differentiation patterns in heterotypical models of artificial corneas generated by tissue engineering. Front Bioeng Biotechnol 2023; 11:1124995. [PMID: 37034263 PMCID: PMC10076743 DOI: 10.3389/fbioe.2023.1124995] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2022] [Accepted: 03/16/2023] [Indexed: 04/11/2023] Open
Abstract
Purpose: We carried out a histological characterization analysis of the stromal layer of human heterotypic cornea substitutes generated with extra-corneal cells to determine their putative usefulness in tissue engineering. Methods: Human bioartificial corneas were generated using nanostructured fibrin-agarose biomaterials with corneal stromal cells immersed within. To generate heterotypical corneas, umbilical cord Wharton's jelly stem cells (HWJSC) were cultured on the surface of the stromal substitutes to obtain an epithelial-like layer. These bioartificial corneas were compared with control native human corneas and with orthotypical corneas generated with human corneal epithelial cells on top of the stromal substitute. Both the corneal stroma and the basement membrane were analyzed using histological, histochemical and immunohistochemical methods in samples kept in culture and grafted in vivo for 12 months in the rabbit cornea. Results: Our results showed that the stroma of the bioartificial corneas kept ex vivo showed very low levels of fibrillar and non-fibrillar components of the tissue extracellular matrix. However, in vivo implantation resulted in a significant increase of the contents of collagen, proteoglycans, decorin, keratocan and lumican in the corneal stroma, showing higher levels of maturation and spatial organization of these components. Heterotypical corneas grafted in vivo for 12 months showed significantly higher contents of collagen fibers, proteoglycans and keratocan. When the basement membrane was analyzed, we found that all corneas grafted in vivo showed intense PAS signal and higher contents of nidogen-1, although the levels found in human native corneas was not reached, and a rudimentary basement membrane was observed using transmission electron microscopy. At the epithelial level, HWJSC used to generate an epithelial-like layer in ex vivo corneas were mostly negative for p63, whereas orthotypical corneas and heterotypical corneas grafted in vivo were positive. Conclusion: These results support the possibility of generating bioengineered artificial corneas using non-corneal HWJSC. Although heterotypical corneas were not completely biomimetic to the native human corneas, especially ex vivo, in vivo grafted corneas demonstrated to be highly biocompatible, and the animal cornea became properly differentiated at the stroma and basement membrane compartments. These findings open the door to the future clinical use of these bioartificial corneas.
Collapse
Affiliation(s)
- Cristina Blanco-Elices
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
| | - Carmen Morales-Álvarez
- GENYO, Centre for Genomics and Oncological Research: Pfizer, University of Granada, Andalusian Regional Government, PTS Granada, Granada, Spain
- Department of Biochemistry and Molecular Biology III, Faculty of Medicine, University of Granada, Granada, Spain
| | - Jesús Chato-Astrain
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
| | | | - Paula Ávila-Fernández
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
| | - Fernando Campos
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
| | - Ramón Carmona
- Department of Cell Biology, Faculty of Sciences, University of Granada, Granada, Spain
| | - Miguel Ángel Martín-Piedra
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
- *Correspondence: Miguel Ángel Martín-Piedra, ; Ingrid Garzón,
| | - Ingrid Garzón
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
- *Correspondence: Miguel Ángel Martín-Piedra, ; Ingrid Garzón,
| | - Miguel Alaminos
- Tissue Engineering Group, Department of Histology, Faculty of Medicine, Universidad de Granada, Granada, Spain
- Instituto de Investigación Biosanitaria ibs.GRANADA, Granada, Spain
| |
Collapse
|
49
|
Kravchenko SV, Sakhnov SN, Myasnikova VV, Trofimenko AI, Buzko VY. [Bioprinting technologies in ophthalmology]. Vestn Oftalmol 2023; 139:105-112. [PMID: 37942604 DOI: 10.17116/oftalma2023139051105] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2023]
Abstract
Bioprinting allows additive fabrication of bioengineered constructs with defined two- or three-dimensional organization using live cells, biopolymers and other materials. This article reviews main bioprinting technologies and their capabilities in clinical and experimental ophthalmology. Analysis of literature sources helped reveal and describe the main types of bioprinting technologies: inkjet, laser-assisted, and extrusion. Extrusion bioprinting is the most widely used method, providing the ability to use various types of bioinks and a wide range of cell concentrations. The following materials can be used as the base for bioinks: alginate, collagen, gelatin, hyaluronic acid, chitosan, fibrin, as well as their different combinations. These materials can be modified for best bioprinting properties by adding various functional groups. The major directions of application of bioprinting technologies in ophthalmology are tissue engineering for regenerative medicine and fabrication of model systems for fundamental and preclinical studies. Experiments in creating a bioprinted cornea are being conducted in the field of regenerative medicine. Furthermore, there are studies on fabricating retinal tissue equivalents, although tissue engineering of this structure is a task of great complexity. Model systems, which can be fabricated by bioprinting, are represented by tissue equivalents of ocular structures and the appendages of the eye, as well as by microphysiological organ-on-a-chip systems. Another promising application of bioprinting is fabrication of biocompatible implantable electrode arrays for visual neuroprostheses.
Collapse
Affiliation(s)
- S V Kravchenko
- Krasnodar branch of S.N. Fedorov National Medical Research Center "MNTK "Eye Microsurgery", Krasnodar, Russia
- Kuban State Technological University, Krasnodar, Russia
| | - S N Sakhnov
- Krasnodar branch of S.N. Fedorov National Medical Research Center "MNTK "Eye Microsurgery", Krasnodar, Russia
- Kuban State Medical University, Krasnodar, Russia
| | - V V Myasnikova
- Krasnodar branch of S.N. Fedorov National Medical Research Center "MNTK "Eye Microsurgery", Krasnodar, Russia
- Kuban State Medical University, Krasnodar, Russia
| | - A I Trofimenko
- Kuban State Technological University, Krasnodar, Russia
- Kuban State Medical University, Krasnodar, Russia
- Scientific Research Institute - Ochapovsky Regional Clinical Hospital No. 1, Krasnodar, Russia
| | - V Yu Buzko
- Kuban State University, Krasnodar, Russia
| |
Collapse
|
50
|
Hu X, Wei R, Liu C, Wang Y, Yang D, Sun L, Xia F, Liu S, Li M, Zhou X. Recent advances in small incision lenticule extraction (SMILE)-derived refractive lenticule preservation and clinical reuse. ENGINEERED REGENERATION 2023. [DOI: 10.1016/j.engreg.2023.01.002] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023] Open
|