Antimicrobial active edible coating of alginate and chitosan add ZnO nanoparticles applied in guavas (Psidium guajava L.)

Preparation and characterization of quercetin@ZIF-L/GO@AgNPs nanocomposite film for room-temperature strawberry preservation

Fresh strawberries are easily contaminated by microorganisms after picking. Therefore, how to effectively store and keep fresh strawberries has been a hot topic for scientists to study. In this study, we prepared a leaf shaped metal organic framework nanomaterial loaded with quercetin (Quercetin@ZIF-L) at first, which can achieve effective loading of quercetin (96%) within 45 min and has a controlled release effect under acidic conditions. In addition, by cleverly combining satellite graphene oxide @ silver nanoparticles (GO@AgNPs) with slow precipitation performance, Quercetin@ZIF-L/GO@AgNPs nanocomposite film with larger pore size and larger specific surface area was prepared by scraping method. The characterization data of water flux, retention rate, flux recovery rate and water vapor permeability show that the composite film has good physical properties. The experiment of film packaging showed that the fresh life of strawberry could be extended from 3 to 8 days, which significantly improved the storage and freshness cycle of strawberry. At the same time, the metal migration test proved that the residual amount of silver ion in strawberry met the EU standard and zinc ions are beneficial to the health, enriching the types of high-performance fresh-keeping materials and broadening the application.

Revolutionizing tropical fruits preservation: Emerging edible coating technologies

Tropical fruits, predominantly cultivated in Southeast Asia, are esteemed for their nutritional richness, distinctive taste, aroma, and visual appeal when consumed fresh. However, postharvest challenges have led to substantial global wastage, nearly 50 %. The advent of edible biopolymeric nanoparticles presents a novel solution to preserve the fruits' overall freshness. These nanoparticles, being edible, readily available, biodegradable, antimicrobial, antioxidant, Generally Recognized As Safe (GRAS), and non-toxic, are commonly prepared via ionic gelation owing to the method's physical crosslinking, simplicity, and affordability. The resulting biopolymeric nanoparticles, with or without additives, can be employed in basic formulations or as composite blends with other materials. This study aims to review the capabilities of biopolymeric nanoparticles in enhancing the physical and sensory aspects of tropical fruits, inhibiting microbial growth, and prolonging shelf life. Material selection for formulation is crucial, considering coating materials, the fruit's epidermal properties, internal and external factors. A variety of application techniques are covered such as spraying, and layer-by-layer among others, including their advantages, and disadvantages. Finally, the study addresses safety measures, legislation, current challenges, and industrial perspectives concerning fruit edible coating films.

Recent advancements in polysaccharides, proteins and lipids based edible coatings to enhance guava fruit shelf-life: A review

Fresh fruits are highly needed for the health benefits of human beings because of the presence of high content of natural nutrition in the form of vitamins, minerals, antioxidants, and other phenolic compounds. However, some nutritional fruits such as guava are climacteric in nature with very less post-harvest shelf-life because of the ripening in a very short period and possibility of microbial infections. Thus security of natural nutrients is a serious concern in order to properly utilize guava without generating a huge amount of waste. Among reported various methods for the enhancement of fruits shelf-life, the application of edible coatings with antimicrobial activities on the outer surface of fruits have attracted significant attention because of their eco-friendly nature, easy applicability, high efficacy, and good durability. In recent years, researchers are paying more and more attention in the development of antimicrobial edible coatings to enhance the post-harvest shelf-life of guava using polysaccharides, protein and lipids. In this review, basic approaches and recent advancements in development of antimicrobial and edible coatings on guava fruit by the application of polysaccharides and protein and lipids along with the combination of nanomaterials are summarized. In addition, improvements in basic properties of edible coatings to significantly control the permeation of gases (O2/CO2) by the optimization of coating components as well as delay in ripening process are reviewed and discussed.

Physicochemical and quality characters of fresh pistachio (Pistacia vera L.) cultivars in response to chitosan/ZnO nanocomposite coating

This study was done to evaluate the effect of pre-harvest foliar application with chitosan (500 and 1000 mg L-1), Nano-chitosan (250 and 500 mg L-1), and chitosan/ZnO nanocomposite (250 and 500 mg L-1) coatings on the quality and shelf life of fresh pistachios of "Akbari" and "Ahmad Aghaei" cultivars during storage. The results showed that 250 and 500 mg L-1 of chitosan/ZnO coatings significantly affected the shelf life of pistachios up to 35 and 40 days, respectively; in addition, chitosan/ZnO nanocomposite in both cultivars reduced weight loss, aflatoxin contamination, decay, polyphenol oxidase and glutathione-peroxidase enzymes, peroxide value, free fatty acids, and improve firmness, sensory properties, protein, oil content, carbohydrate, antioxidant properties, anthocyanin, phenol, and flavonoid. These results indicated that using chitosan/ZnO (250 and 500 mg L-1) is a promising efficient, safe, and environmentally friendly method for preserving the quality of fresh pistachios. It reduces hull browning and minimizes post-harvest losses.

Advanced biopolymer-based edible coating technologies for food preservation and packaging

Along with the growth of the world's population that reduces the accessibility of arable land and water, demand for food, as the fundamental element of human beings, has been continuously increasing each day. This situation not only becomes a challenge for the modern food chain systems but also affects food availability throughout the world. Edible coating is expected to play a significant role in food preservation and packaging, where this technique can reduce the number of food loss and subsequently ensure more sustainable food and agriculture production through various mechanisms. This review provides comprehensive information related to the currently available advanced technologies of coating applications, which include advanced methods (i.e., nanoscale and multilayer coating methods) and advanced properties (i.e., active, self-healing, and super hydrophobic coating properties). Furthermore, the benefits and drawbacks of those technologies during their applications on foods are also discussed. For further research, opportunities are foreseen to develop robust edible coating methods by combining multiple advanced technologies for large-scale and more sustainable industrial production.

Roles of polysaccharides-based nanomaterials in food preservation and extension of shelf-life of food products: A review

In food production sectors, food spoilage and contamination are major issues that threaten and negatively influence food standards and safety. Several physical, chemical, and biological methods are used to extend the shelf-life of food products, but they have their limitations. Henceforth, researchers and scientists resort to novel methods to resolve these existing issues. Nanomaterials-based extension of food shelf life has broad scope rendering a broad spectrum of activity including high antioxidant and antimicrobial activity. Numerous research investigations have been made to identify the possible roles of nanoparticles in food preservation. A wide range of nanomaterials via different approaches is ultimately applied for food preservation. Among them, chemically synthesized methods have several limitations, unlike biological synthesis. However, biological synthesis protocols are quite expensive and laborious. Predominant studies demonstrated that nanoparticles can protect fruits and vegetables by preventing microbial contamination. Though several nanomaterials designated for food preservation are available, detailed knowledge of the mechanism remains unclear. Hence, this review aims to highlight the various nanomaterials and their roles in increasing the shelf life of food products. Adding to the novel market trends, nano-packaging will open new frontiers and prospects for ensuring food safety and quality.

Effect of Aloe vera and carboxymethyl cellulose-derived binary blend edible coating on the shelf life of fresh-cut apple

In recent years, the demand and market for minimally processed fruits are increasing worldwide. Fresh-cut apples are extremely sensitive to environmental factors including oxygen, temperature, and microorganisms in resulting the browning of apples. Therefore, in this study, different concentration of blended edible-coating solution was prepared using Aloe vera and carboxymethyl cellulose (1:1, 1:2, 2:1, 3:3, 3:2, 4:2, 2:4, 3:4, and 4:3, respectively). Lease particle size (101.74 ± 0.67 nm) of the coating solution was observed with 3% A. vera and 2% carboxymethyl cellulose (CMC). Afterward, the shelf life of the apples was evaluated for 10 days at refrigeration condition. Results showed that a significant difference was found in weight loss of coated (6.42%-10.26%) and uncoated apples (8.12%-15.32%) for 2-10 days. Moreover, the titrable acidity of the cut apples increased during the storage time. Rheological data emerged that the viscosity of the coating solution decreases with the increasing temperature from 0 to 50°C. Fourier transform infrared spectroscopy data confirmed the presence of hydroxyl group (-OH), C=O, C-O, and N-H banding in the A. vera, CMC, and blend-coating solution. The blend solution indicated excellent antimicrobial efficiency. Total phenolic content of coated and uncoated apples at 0 day was 737.55 mg GAE kg-1 for uncoated and 717.88 mg GAE kg-1, respectively. Whereas, aerobic and psychrotrophic bacteria counts for edible coated apples significantly lower than control apples. For coated apples, aerobic and psychrotrophic bacteria counts were 1.59 ± 0.84 and 1.25 ± 0.49 log CFU g-1 were 4.26 ± 0.67 and 2.68 ± 0.22 log CFU g-1 at 10th day, respectively. Overall, it can be inferred that blend of A. vera and carboxymethyl cellulose could be used as a nontoxic potential anti-browning and antimicrobial component for the enhancement of the shelf life and additional nutritional value of fresh-cut apples.

Chitosan Coatings Modified with Nanostructured ZnO for the Preservation of Strawberries

Strawberries are highly consumed around the world; however, the post-harvest shelf life is a market challenge to mitigate. It is necessary to guarantee the taste, color, and nutritional value of the fruit for a prolonged period of time. In this work, a nanocoating based on chitosan and ZnO nanoparticles for the preservation of strawberries was developed and examined. The chitosan was obtained from residual shrimp skeletons using the chemical method, and the ZnO nanoparticles were synthesized by the close-spaced sublimation method. X-ray diffraction, scanning electron microscopy, electron dispersion analysis, transmission electron microscopy, and infrared spectroscopy were used to characterize the hybrid coating. The spaghetti-like ZnO nanoparticles presented the typical wurtzite structure, which was uniformly distributed into the chitosan matrix, as observed by the elemental mapping. Measurements of color, texture, pH, titratable acidity, humidity content, and microbiological tests were performed for the strawberries coated with the Chitosan/ZnO hybrid coating, which was uniformly impregnated on the strawberries' surface. After eight days of storage, the fruit maintained a fresh appearance. The microbial load was reduced because of the synergistic effect between chitosan and ZnO nanoparticles. Global results confirm that coated strawberries are suitable for human consumption.

A Review on Edible Coatings and Films: Advances, Composition, Production Methods, and Safety Concerns

Food is a crucial source for the endurance of individuals, and quality concerns of consumers are being raised with the progression of time. Edible coatings and films (ECFs) are increasingly important in biobased packaging because they have a prime role in enhancing the organoleptic characteristics of the food products and minimizing the spread of microorganisms. These sustainable ingredients are crucial for a safer and healthier environment. These are created from proteins, polysaccharides, lipids, plasticizers, emulsifiers, and active substances. These are eco-friendly since made from innocuous material. Nanocomposite films are also beginning to be developed and support networks of biological polymers. Antioxidant, flavoring, and coloring compounds can be employed to improve the quality, wellbeing, and stability of packaged foods. Gelatin-enhanced fruit and vegetable-based ECFs compositions have the potential to produce biodegradable films. Root plants like cassava, potato, and sweet potato have been employed to create edible films and coatings. Achira flour, amylum, yam, ulluco, and water chestnut have all been considered as novel film-forming ingredients. The physical properties of biopolymers are influenced by the characteristics, biochemical confirmation, compatibility, relative humidity, temperature, water resistance, and application procedures of the components. ECFs must adhere to all regulations governing food safety and be generally recognized as safe (GRAS). This review covers the new advancements in ECFs regarding the commitment of novel components to the improvement of their properties. It is expected that ECFs can be further investigated to provide innovative components and strategies that are helpful for global financial issues and the environment.

The combination treatment of chlorogenic acid and sodium alginate coating could accelerate the wound healing of pear fruit by promoting the metabolic pathway of phenylpropane

Water loss and microbial infection induced by mechanical injury are the main sources of harvested loss of fruits and vegetables. Plenty studies have shown that regulating phenylpropane-related metabolic pathways can effectively accelerate wound healing. The combination treatment of chlorogenic acid and sodium alginate coating on postharvest wound healing of pear fruit were investigated in this work. The result shows combination treatment reduced weight loss and disease index of the pears, enhanced texture of healing tissues, maintained the integrity of cell membrane system. Moreover, chlorogenic acid increased the content of total phenols and flavonoids, and ultimately leads to the accumulation of suberin poly phenolic (SPP) and lignin around wound cell wall. Activities of phenylalanine metabolism-related enzymes (PAL, C4H, 4CL, CAD, POD and PPO) in wound-healing tissue were enhanced. The contents of major substrates such as trans-cinnamic, p-coumaric, caffeic, and ferulic acids also increased. The presented results suggested that the combination treatment of chlorogenic acid and sodium alginate coating stimulated wound healing in pears by elevating the phenylpropanoid metabolism pathway, so that maintain high postharvest fruit quality.

Metal-Based Nanoparticles in Food Packaging and Coating Technologies: A Review

Food security has continued to be a topic of interest in our world due to the increasing demand for food. Many technologies have been adopted to enhance food supply and narrow the demand gap. Thus, the attempt to use nanotechnology to improve food security and increase supply has emerged due to the severe shortcomings of conventional technologies, which have made them insufficient to cater to the continuous demand for food products. Hence, nanoparticles have been identified to play a major role in areas involving food production, protection, and shelf-life extensions. Specifically, metal-based nanoparticles have been singled out to play an important role in manufacturing materials with outstanding properties, which can help increase the shelf-life of different food materials. The physicochemical and biological properties of metal-based nanoparticles, such as the large surface area and antimicrobial properties, have made them suitable and adequately useful, not just as a regular packaging material but as a functional material upon incorporation into biopolymer matrices. These, amongst many other reasons, have led to their wide synthesis and applications, even though their methods of preparation and risk evaluation remain a topic of concern. This review, therefore, briefly explores the available synthetic methods, physicochemical properties, roles, and biological properties of metal-based nanoparticles for food packaging. Furthermore, the associated limitations, alongside quality and safety considerations, of these materials were summarily explored. Although this area of research continues to garner attention, this review showed that metal-based nanoparticles possess great potential to be a leading material for food packaging if the problem of migration and toxicity can be effectively modulated.

Alginate: Microbial production, functionalization, and biomedical applications

Alginates are natural polysaccharides widely participating in food, pharmaceutical, and environmental applications due to their excellent gelling capacity. Their excellent biocompatibility and biodegradability further extend their application to biomedical fields. The low consistency in molecular weight and composition of algae-based alginates may limit their performance in advanced biomedical applications. It makes microbial alginate production more attractive due to its potential for customizing alginate molecules with stable characteristics. Production costs remain the primary factor limiting the commercialization of microbial alginates. However, carbon-rich wastes from sugar, dairy, and biodiesel industries may serve as potential substitutes for pure sugars for microbial alginate production to reduce substrate costs. Fermentation parameter control and genetic engineering strategies may further improve the production efficiency and customize the molecular composition of microbial alginates. To meet the specific needs of biomedical applications, alginates may need functionalization, such as functional group modifications and crosslinking treatments, to achieve enhanced mechanical properties and biochemical activities. The development of alginate-based composites incorporated with other polysaccharides, gelatin, and bioactive factors can integrate the advantages of each component to meet multiple requirements in wound healing, drug delivery, and tissue engineering applications. This review provided a comprehensive insight into the sustainable production of high-value microbial alginates. It also discussed recent advances in alginate modification strategies and alginate-based composites for representative biomedical applications.

Recent insights into Nanoemulsions: Their preparation, properties and applications

The ever-increasing demand for healthy diet by consumers has prompted the research adopting cutting-edge methods that can maintain the quality of fruits and vegetables without the use of preservatives. Emulsion based coating approach has been regarded as a viable way to extend the shelf life of fresh produce. New opportunities are being created in a number of industries, (medicines, cosmetics and food) because of new advancements in the developing field of nanoemulsions. Nanoemulsion based methods are efficient for encapsulating the active ingredients including antioxidants, lipids, vitamins and antimicrobial agents owing to the small droplet size, stability and improved biological activity. This review provides an overview of recent developments in preserving the quality and safety of fresh-cut fruits & vegetables with nanoemulsion as a carrier of functional compounds (antimicrobial agents, antibrowning/antioxidants and texture enhancers). In addition, material and methods used for fabrication of the nanoemulsion is also described in this review. In addition, material and methods used for fabrication, of the nanoemulsion is also present.

Experimental Advances in the Real-Time Recording of Cross-Linking Alginate In Situ Gelation: A Review

Alginate-based hydrogels are promising smart materials widely employed in the food, bioengineering, and energy sectors. The development and optimization of their production require a thorough knowledge of gelation. In recent years, advanced experimental procedures have been developed for real-time cross-linking alginate reaction monitoring. Novel methods, such as customized rheometric setups, enable the recording of mechanical properties and morphological changes during hydrogel formation. These innovative techniques provide important insights into the gelation stages, the reaction rate, the diffusion of cross-linker to polymer chains, and the homogeneity of the gelling structures. Based on real-time experimental data, kinetic models are developed to enhance comprehension of the reaction mechanism and, eventually, to predict the gelation progress. The aim is to enable better control of the characterization of both the complex gelation and the propagated structures. This review aspires to present a comprehensive overview and evaluation of the breakthrough innovations of the real-time in situ recording of cross-linking alginate hydrogels and bead formation. A detailed analysis of the pioneering experimental developments provides a deep comprehension of the alginate gelation, including the parameters controlling the reaction.

Effects of Three Essential Oil Fumigation Treatments on the Postharvest Control of Botrytis cinerea and Their Efficacy as Preservatives of Cherry Tomatoes

Cherry tomatoes (Solanum lycopersicum) are becoming increasingly popular due to their nutrition and delicious flavor. However, cherry tomatoes are highly perishable and susceptible to various pathogenic microorganisms after harvest, such as Botrytis cinerea. In the pretest experiment, we screened out three kinds of plant essential oils (EOs) (Torreya grandis oil, Eriobotrya japonica oil, and Citrus medica oil) that have strong fungicidal activity on B. cinerea from cherry tomatoes. To further evaluate the postharvest preservation application prospect of these three oils for cherry tomatoes, the oils were extracted from different parts of three plants by hydrodistillation, and their chemical constituents were analyzed by gas chromatography-mass spectrometry. The main representative components of T. grandis oil, E. japonica oil, and C. medica oil were δ-cadinene (11.76%), transnerolidol (9.70%), and 5,7-dimethoxycoumarin (23.22%), respectively. These three EOs effectively inhibited the mycelial growth of B. cinerea in vitro, with EC50 values of 81.672, 144.046, and 221.500 μl/liter, respectively. Compared with the blank control and other oil treatments, the T. grandis oil (at a concentration of 200 µl/liter) fumigation treatment was more effective at inhibiting the growth rate of the pathogen. In addition, the phenolic content and phenylalanine ammonia lyase, β-1,3-glucanase, chitinase, and peroxidase activities of tomatoes significantly increased on the seventh day due to the T. grandis oil treatment. The present study shows that these three oils with high extraction rates have preservation potential for cherry tomatoes. Among these three EOs, T. grandis oil can be used to further develop preservative products as a fumigant.

Chitosan-based nanocomposites as coatings and packaging materials for the postharvest improvement of agricultural product: A review

The perishability nature of harvested fruits and vegetables, along with the effect of environmental factors, storage conditions, and transportation, reduce the products' quality and shelf-life. Considerable efforts have been allocated to alternate conventional coatings based on new edible biopolymers for packaging. Chitosan is an attractive alternative to synthetic plastic polymers due to its biodegradability, antimicrobial activity, and film-forming properties. However, its conservative properties can be improved by adding active compounds, limiting microbial agents' growth and biochemical and physical damages, and enhancing the stored products' quality, shelf-life, and consumer acceptability. Most of the research on chitosan-based coatings focuses on antimicrobial or antioxidant properties. Along with the advancement of polymer science and nanotechnology, novel chitosan blends with multiple functionalities are required and should be fabricated using numerous strategies, especially for application during storage. This review discusses recent developments in using chitosan as a matrix to fabricate bioactive edible coatings and their positive impacts on increasing the quality and shelf-life of fruits and vegetables.

The Antibacterial Activities and Characterizations of Biosynthesized Zinc Oxide Nanoparticles, and Their Coated with Alginate Derived from Fucus vesiculosus

Zinc oxide nanoparticles have many advantages for nano-biotechnologists due to their intense biomedical applications. ZnO-NPs are used as antibacterial agents, which influence bacterial cells through the rupture of the cell membrane and the generation of reactive free radicals. Alginate is a polysaccharide of natural origin due to its excellent properties that are used in various biomedical applications. Brown algae are good sources of alginate and are used as a reducing agent in the synthesis of nanoparticles. This study aims to synthesize ZnO-NPs by using brown alga Fucus vesiculosus (Fu/ZnO-NPs) and also to extract alginate from the same alga, which is used in coating the ZnO-NPs (Fu/ZnO-Alg-NCMs). The characterizations of Fu/ZnO-NPs and Fu/ZnO-Alg-NCMs were determined by FTIR, TEM, XRD, and zeta potential. The antibacterial activities were applied against multidrug resistance bacteria of both gram-positive and negative. The results obtained in FT-TR showed there are some shifts in the peak positions of Fu/ZnO-NPs and Fu/ZnO-Alg-NCMs. The peak at 1655 cm^-1, which assigned amide I-III, is present in both Fu/ZnO-NPs and Fu-Alg-ZnO-NCMs; this band is responsible for bio-reductions and stabilization of both nanoparticles. The TEM images proved the Fu/ZnO-NPs have rod shapes with sizes ranging from 12.68 to 17.66 and are aggregated, but Fu/ZnO/Alg-NCMs are spherical in shape with sizes ranging from 12.13 to 19.77. XRD-cleared Fu/ZnO-NPs have nine sharp peaks that are considered good crystalline, but Fu/ZnO-Alg-NCMs have four broad and sharp peaks that are considered semi-crystalline. Both Fu/ZnO-NPs and Fu/ZnO-Alg-NCMs have negative charges (-1.74 and -3.56, respectively). Fu/ZnO-NPs have more antibacterial activities than Fu/ZnO/Alg-NCMs in all tested multidrug-resistant bacterial strains. Fu/ZnO/Alg-NCMs had no effect on Acinetobacter KY856930, Staphylococcus epidermidis, and Enterobacter aerogenes, whereas there was an apparent effect of ZnO-NPs against the same strains.

Green nanotechnology for the development of nanoparticles based on alginate associated with essential and vegetable oils for application in fruits and seeds protection

Aiming to highlight the valorization of the natural products and the green synthesis processes, this work describes the development of a nanoscale system based on the use of alginate to encapsulate a blend of oils (vegetable and essential oils), not previously reported, with antibacterial and antioxidant actions. The study shows the influence of the polymer and surfactant concentrations on the physicochemical properties of the nanoparticles. The formulations were characterized by DLS, zeta potential, efficiency of encapsulation and stability. In addition, the antioxidant and antimicrobial properties of the systems were evaluated using the DPPH method and disk diffusion assays, respectively. The shelf life was studied by coating fruits and seeds. The results showed that the nanostructured system was stable, the efficiency of encapsulation was high and the nanoparticles size range was about 200-400 nm. The coating of fruits and seeds showed that the system was capable of inhibiting the growth of microorganisms and delaying the fruit maturation, indicating its potential for prolonging the shelf-life of fresh food.

High performance biopolymeric packaging films containing zinc oxide nanoparticles for fresh food preservation: A review

Biodegradable food packaging films (FPFs) assembled from sustainable biopolymeric materials are of increasing interest to the food industry due to pollution and health risks resulting from the use of conventional plastic packaging. However, the functional performance of these FPFs is often poorer than that of plastic films, which limits their commercial application. This problem may be partly overcome by incorporating nano-additives like zinc oxide nanoparticles (ZNPs) into the films. The incorporation of ZNPs into FPFs can improve their functional performance. The properties of these films depends on the concentration, dispersion state, and interactions of ZNPs with the biopolymeric matrix in the films. ZNPs-loaded films and coatings are highly effective at preserving a variety of fresh foods. Studies of ZNPs migration through FPFs have shown that the zinc is mainly transported in an ionic form and the amount entering foods is below safety standards. This article reviews recent developments in the design, fabrication, and application of ZNPs-loaded FPFs based on biopolymers, focusing on the impacts of ZNPs on the optical, barrier, mechanical, water sensitivity, and antimicrobial properties of the films. The potential applications of ZNPs-loaded FPFs for fresh food preservation is also discussed.

Effect of Composite Chitosan/Sodium Alginate Gel Coatings on the Quality of Fresh-Cut Purple-Flesh Sweet Potato

In this study, single-layer coating using chitosan (Ch) and sodium alginate (SA) solutions and their gel coating (ChCSA) formed by layer-by-layer (LbL) electrostatic deposition using calcium chloride (C) as a cross linking agent were prepared to improve storage qualities and shelf-life of fresh-cut purple-flesh sweet potatoes (PFSP). The preservative effects of single-layer coating in comparison with LbL on the quality parameters of fresh-cut PFSP, including color change, weight loss, firmness, microbial analysis, CO2 production, pH, solid content, total anthocyanin content (TAC), and total phenolic content (TPC) were evaluated during 16 days of storage at 5 °C. Uncoated samples were applicable as a control. The result established the effectiveness of coating in reducing microbial proliferation (~2 times), color changes (~3 times), and weight loss (~4 times) with negligible firmness losses after the storage period. In addition, TAC and TPC were better retained in the coated samples than in the uncoated samples. In contrast, quality deterioration was observed in the uncoated fresh cuts, which progressed with storage time. Relatively, gel-coating ChCSA showed superior effects in preserving the quality of fresh-cut PFSP and could be suggested as a commercial method for preserving fresh-cut purple-flesh sweet potato and other similar roots.

Active food packaging films from alginate and date palm pit extract: Physicochemical properties, antioxidant capacity, and stability

Date palm pits are highly available and inexpensive palm date by-products, representing a valuable source of natural antioxidants, particularly phenolic compounds. Date palm pit extract (DPPE) was prepared from these waste products and characterized for its phenolic content and in vitro antioxidant activity. Profiling DPPE by liquid chromatography coupled with mass spectrometry (LC/MS) showed the presence of dimers and trimers of (epi)catechin as the main constituents. Alginate-based films with four increasing concentrations of DPPE (10%, 20%, 30%, and 40% w/w) were prepared by the casting method. DPPE incorporation reduced solubility values of alginate films by 37%-64% and their surface wettability by 72%-111%. The incorporation of 10% DPPE improved water vapor barrier properties and increased tensile strength (TS) and elongation at break (%E) of alginate films by more than 23%, 50%, and 45%, respectively. The film containing 40% DPPE showed the lowest loss of phenolic content (32%), DPPH (1,1-diphenyl-2-picrylhydrazyl) scavenging activity (38%), and ferric reducing antioxidant power (FRAP) (30%) after storage for 3 months.

Effective control of microbial spoilage in soybeans by water-soluble ZnO nanoparticles

The microbial spoilage of soybeans during soaking process severely deteriorates the quality of soybean products and threatens human health. Herein, water-soluble aminated zinc oxide nanoparticles (ZnO NPs) were developed to effectively control the microbial spoilage in soybeans during soaking. ZnO NPs achieved significant inactivation of three dominant spoilage bacteria (bacillus cereus, bacillus megaterium and enterococcus faecium) isolated from the deteriorated soybeans, which could adhere to the bacterial surface and damage the cell wall/membrane, but also generate large amounts of reactive oxygen species (ROS). Compared to two commercial ZnO, water-soluble ZnO exhibited superior antibacterial properties due to producing more ROS and bacteria-adhered ability. After ZnO NPs treatment, the content of the residual Zn (51.1 mg/kg) in soybeans was the safety standards of Zn element in soybeans products for human). Therefore, the water-soluble ZnO NPs showed great potentials as efficient and safe antimicrobial agents for soybeans preservation during soaking process.

Evaluating the Efficacy of Gum Arabic-Zinc Oxide Nanoparticles Composite Coating on Shelf-Life Extension of Mandarins (cv. Kinnow)

Restricted postharvest application of synthetic fungicides in maintaining the quality of citrus fruits has led to a search for alternative postharvest treatments. This study evaluated the efficacy of gum arabic (GA) enriched with green synthesized zinc oxide nanoparticles (ZnO-NPs) in maintaining the postharvest quality of mandarin (cv. Kinnow). ZnO-NPs were synthesized using Bidens pilosa leaf extract and incorporated into GA (2% w/v) at 0, 0.25, 0.5, and 1% to form composite coatings: GA, GA + ZnO-NP 0.25%, GA + ZnO-NP 0.5% and GA + ZnO-NP 1%, respectively. Fruit were dipped for 3 min in the respective coatings, with untreated fruit used as control. Fruit were air-dried, packed in commercial cartons, and stored at 5 ± 1°C and 90 ± 5% relative humidity (RH) for 40 days and observed at 10 days intervals, plus 5 days at 20 ± 5°C and 65 ± 5% RH to determine the incidence of physiological disorders. GA + ZnO-NP showed promise as an alternative postharvest treatment for controlling postharvest physiological disorders associated with 'Kinnow' mandarin. For instance, GA + ZnO-NP 0.5% markedly minimized weight loss (9.2%), electrolyte leakage (43.8%) and chilling injury incidence (5.4%) compared to control (weight loss; 33.3%, electrolyte leakage; 90.3% and chilling injury incidence; 41.5%) at the end of the storage. GA + ZnO-NP 1% significantly alleviated rind pitting, with 13.2% incidence compared to 45.2% rind pitting incidence in the control fruit. This was due to significantly higher phytochemical and antioxidant capacity and reduced antioxidant enzyme degradation in coated fruit than in control. In conclusion, gum arabic coating enriched with ZnO-NPs at concentrations between 0.5 and 1% is recommended as a viable option to maintain the quality of 'Kinnow' mandarin fruit during cold storage.

Preparation of a biodegradable chitosan packaging film based on zinc oxide, calcium chloride, nano clay and poly ethylene glycol incorporated with thyme oil for shelf-life prolongation of sweet cherry

This study includes development of chitosan-based films with incorporated essential thyme oil and different combinations of cross-linkers viz., ZnO, CaCl₂, NC, and PEG for the safe storage of sweet cherries. The resulting films stored with sweet cherries were analyzed for different physicochemical and antimicrobial properties. Incorporation of ZnO, CaCl₂, NC, and PEG in chitosan-based films maintained fruit quality by conserving higher total soluble solids, titratable acidity, and reduced weight loss. The combined ZnO + CaCl₂ + NC + PEG in chitosan-based films also suppressed microbial activity. The sensorial quality of fruits stored with CH + ZnO + CaCl₂ + NC + PEG treatment was also stable during storage. In conclusion, the combined CH + ZnO + CaCl₂ + NC + PEG with added thyme oil application is an effective approach to maintain the postharvest quality and could be an alternative to increase the shelf life of sweet cherries, besides decreasing environmental impacts of non-biodegradable packages.

Enhancing the UV-Light Barrier, Thermal Stability, Tensile Strength, and Antimicrobial Properties of Rice Starch-Gelatin Composite Films through the Incorporation of Zinc Oxide Nanoparticles

The effects of zinc oxide nanoparticles (ZnONPs) on the properties of rice starch−gelatin (RS−G) films were investigated. ZnONPs were synthesized by a green method utilizing Asiatic pennywort (Centella asiatica L.) extract. The ZnONPs were rod-shaped, with sizes ranging from 100−300 nm. An increase in the concentration of ZnONPs significantly (p < 0.05) increased the thickness (0.050−0.070 mm), tensile strength (3.49−4.63 MPa), water vapor permeability (5.52−7.45 × 10−11 g m/m2 s Pa), and thermal stability of the RS−G−ZnONPs nanocomposite films. On the other hand, elongation at break (92.20−37.68%) and film solubility (67.84−30.36%) were significantly lower (p < 0.05) than that of the control RS−G film (0% ZnONPs). Moreover, the addition of ZnONPs strongly affected the film appearance, color, transmission, and transparency. The ZnONPs had a profound effect on the UV-light barrier improvement of the RS−G film. The crystalline structure of the ZnONPs was observed in the fabricated nanocomposite films using X-ray diffraction analysis. Furthermore, the RS−G−ZnONPs nanocomposite films exhibited strong antimicrobial activity against all tested bacterial strains (Staphylococcus aureus TISTR 746, Bacillus cereus TISTR 687, Escherichia coli TISTR 527, Salmonella Typhimurium TISTR 1470) and antifungal activity toward Aspergillus niger. According to these findings, RS−G−ZnONPs nanocomposite film possesses a potential application as an active packaging: antimicrobial or UV protective.

New Zinc-Based Active Chitosan Films: Physicochemical Characterization, Antioxidant, and Antimicrobial Properties

The improvement of the antioxidant and antimicrobial activities of chitosan (CS) films can be realized by incorporating transition metal complexes as active components. In this context, bioactive films were prepared by embedding a newly synthesized acylpyrazolonate Zn(II) complex, [Zn(Q^PhtBu)₂(MeOH)₂], into the eco-friendly biopolymer CS matrix. Homogeneous, amorphous, flexible, and transparent CS@Zn_n films were obtained through the solvent casting method in dilute acidic solution, using different weight ratios of the Zn(II) complex to CS and characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR), Raman, and scanning electron microscopy (SEM) techniques. The X-ray single-crystal analysis of [Zn(Q^PhtBu)₂(MeOH)₂] and the evaluation of its intermolecular interactions with a protonated glucosamine fragment through hydrogen bond propensity (HBP) calculations are reported. The effects of the different contents of the [Zn(Q^PhtBu)₂(MeOH)₂] complex on the CS biological proprieties have been evaluated, proving that the new CS@Zn_n films show an improved antioxidant activity, tested according to the DPPH method, with respect to pure CS, related to the concentration of the incorporated Zn(II) complex. Finally, the CS@Zn_n films were tried out as antimicrobial agents, showing an increase in antimicrobial activity against Gram-positive bacteria (Staphylococcus aureus) with respect to pure CS, when detected by the agar disk-diffusion method.

Nanotechnology‐enhanced edible coating application on climacteric fruits

Climacteric fruits continue to ripen after harvest and produce ethylene, coupled with an increase in respiration rate, which contributes to more rapid perishability. Inhibition of ethylene biosynthesis has been shown to be an efficient way to delay the onset of ripening and lengthen shelf life. The use of edible materials as coatings presents an efficient approach in preserving the quality of fruits. Edible coatings have many benefits, such as affordability, ease of application, and use of natural ingredients. Nanotechnology provides interesting approaches to the management of fruit shelf life after harvest. Nanotechnology has the capacity of producing new materials by minimizing the size of components to a nanometric level. These kinds of nanomaterials possess distinct and improved properties for delaying fruit ripening and decay. The main goal of adding nanoparticles to edible coatings is to enhance the biopolymer's mechanical and water vapor barrier properties. Nanoparticles also contain biopolymer‐like features and are thought to have superior antibacterial, antifungal, and antiviral properties than edible coatings. This review is aimed at summarizing recent findings on the application of edible coatings in the form of nanoparticles, and their effect on quality parameters and shelf life extension of climacteric fruits. Peer‐reviewed articles were obtained by using Scopus and science direct. The current materials widely used for coating climacteric fruits are zinc, silver and chitosan nanoparticles. Zinc nanoparticles have been shown to be more effective in delaying ripening significantly by reducing weight and moisture loss and ensuring retention of fruit firmness. Further research is needed to understand their effect on other physicochemical properties of fruits.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

Nano- and micro-sized carnauba wax emulsions-based coatings incorporated with ginger essential oil and hydroxypropyl methylcellulose on papaya: Preservation of quality and delay of post-harvest fruit decay

•

Nanoemulsion with 18% carnauba wax maintained papaya quality by retarding firmness loss, color changes, and reducing respiration rates, resulting in delayed ripening.

•

Changes in flavor was not perceived by the panel in tasting samples.

•

Coatings protection level was dependent on the storage conditions.

•

GEO associated with carnauba nano-emulsions, showed a positive effect in reducing natural diseases.

Carnauba wax nano and micro-sized emulsions and hydroxypropyl methylcellulose coatings, alone or combined with ginger essential oils (GEO) were applied on papayas and evaluated under several storage conditions. In a first experiment, storage parameters were: 6 days at 22 °C, and 9 days at 13 °C followed by 5 days at 22 °C. In a second experiment, storage was: 5 days at 22 °C, and 10 days at 16 °C followed by 3 days at 22 °C. Coating effects were dependent on storage conditions. While fruits were in cold storage, there were few changes; however, at 22 °C, the differences between coatings became more evident. Nanoemulsions maintained papaya quality during storage by retarding firmness loss, color changes, and reducing respiration rates, resulting in delayed ripening. GEO exhibited some positive effect on fungal disease control. Nanoemulsion-based coatings improved shelf life by reducing weight loss, color development, and slowing ripening of papaya fruit.

Recent Advancements of Polysaccharides to Enhance Quality and Delay Ripening of Fresh Produce: A Review

The freshness of fruits and vegetables plays a significant role in consumers' decision to purchase a product at the supermarket. Fresh-cut products are the latest trend in fulfilling society's restless needs, and the food industry is faced with the challenge of maintaining the quality of fresh produce. The food industry is concerned with the natural maturation and degradation of fruits and vegetables, primarily due to enzymatic reactions. It has been demonstrated that polysaccharide coatings effectively preserve the freshness of these products, extending their shelf life depending on the preservation method used. This review informs readers about the different types of polysaccharides and their novel applications as natural food preservatives in the past five years (2018-2022). The key findings summarized the properties of the antimicrobial agent, the molecular mechanism of action, coating methods, and formulation for the preservation approach. Additionally, we discuss the scientific factors influencing polysaccharide processing and preservation efficacy, allowing it to be used in post-harvest management.

Recent Advances in Novel Packaging Technologies for Shelf-Life Extension of Guava Fruits for Retaining Health Benefits for Longer Duration

Guava (Psidium guajava L.) fruit is also known as the apple of tropics, belongs to the family of genus Psidium, and is widely cultivated in tropical zones of the world. Recently, the importance of guava fruit has increased due to its inherent nutritional content, pleasant aroma, excellent flavor, and delicious taste. It is considered an excellent source of nutrients and phytochemicals. Guava is a climacteric fruit that continues to mature or ripen even after harvest, showing an increase in the rate of respiration and metabolic activities within a short period, leading to rapid senescence or spoilage of fruit. It has limitations in terms of commercialization due to short storage life after harvest and sensitivity to diseases and chilling injury during the storage period. Many postharvest technologies such as edible packaging, modified atmosphere packaging (MAP), composite packaging, controlled atmosphere packaging (CAP), antimicrobial/antifungal packaging, and nano packaging have been used to retard the chilling injury and enhance the keeping quality of guava fruits during the storage period to control respiration rate, reduce weight loss, minimize lipid oxidation, and maintain organoleptic properties. However, these packaging technologies have varied effects on the internal and external quality attributes of guava fruits. This review, therefore, discusses the physiology, mechanism of ripening, oxidation, and ethylene production of guava fruits. The review also discusses the packaging technologies and their effect on the postharvest characteristics of guava fruits during the storage period.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O₂/CO₂) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.

Synergistic effect of ZnO NPs and imidacloprid on liver injury in male ICR mice: Increase the bioavailability of IMI by targeting the gut microbiota

Although many toxicological studies on pesticides and nanoparticles have been conducted, it is not clear whether nanoparticles will increase the toxicity of pesticides. In this study, we chose imidacloprid (IMI) as a representative pesticide, and explored the influence of ZnO NPs on the toxic effect of IMI. In addition, we studied the bioaccumulation of IMI in mice. Using biochemical index analysis, liver histopathological analysis, non-targeted metabolomics, and LC/MS analysis, we found that ZnO NPs increased the toxicity of IMI, which may be related to the increase in IMI bioaccumulation in mice. In addition, we used intestinal histopathological analysis, RT-qPCR, and 16sRNA sequencing to find that the disturbance of the gut microbiota and the impaired intestinal barrier caused by ZnO NPs may be the reason for the increase in IMI bioaccumulation. In summary, our results indicate that ZnO NPs disrupted the intestinal barrier and enhanced the bioaccumulation of IMI, and therefore increased the toxicity of IMI in mice. Our research has deepened the toxicological insights between nanomaterials and pesticides.

Recent advances in extraction, modification, and application of chitosan in packaging industry

Current environmental concerns fostered a strong interest in extracting polymers from renewable feedstocks. Chitosan, a second most abundant polysaccharide after cellulose, may prove to be a promising green material owing to its renewability, inherent biodegradablity, natural availability, non-toxicity, and ease of modification. This review is intended to comprehensively overview the recent developments on the isolation of chitosan from chitin, its modification and applications as a reinforcing candidate for food packaging materials, emphasizing the scientific underpinnings arising from its physicochemical properties, antimicrobial, antioxidant, and antifungal activities. We review various chitosan-reinforced composites reported in the literature and comprehensively present intriguing mechanical and other functional properties. We highlight the contribution of these mechanically robust and responsive materials to extend the shelf-life and maintain the qualities of a wide range of food commodities. Finally, we assess critical challenges and highlight future opportunities towards understanding the versatile applications of chitosan nanocomposites.

Effect of Chitosan-24-Epibrassinolide Composite Coating on the Quality Attributes of Late-Harvested Pomegranate Fruit under Simulated Commercial Storage Conditions

This study evaluated the efficacy of chitosan (CH) functionalized with 24-epibrassinolide (EBR) coating in terms of preserving the postharvest quality of late-harvested pomegranate (cv. Wonderful) fruit. Late-harvested pomegranate fruit were immersed for 3 min in different surface treatment solutions—CH 1.5% (w/v), CH + 2 µM EBR, CH + 5 µM EBR, CH + 10 µM EBR and CH + 15 µM EBR—and distilled water was used as a control treatment. The fruit were air-dried and subjected to long storage duration at 5 °C with 85 ± 5 RH for 12 weeks. At 4-week sampling intervals, a batch of fruits was placed at 21 ± 2 °C and 65–70% RH for a further 3 d period to simulate retail conditions before measurements were taken. Fruit physiological responses, physico-chemical properties, phytochemical contents, antioxidant capacity and physiological disorders were monitored during storage. The results showed that the CH-EBR composite edible coatings significantly (p < 0.05) delayed degradative processes due to senescence. The CH-EBR treatments delayed colour, texture and total soluble solids (TSS) degradation and reduced weight loss, respiration, electrolyte leakage and spoilage compared to the control and CH treatment. The treatment effect was more noticeable on fruit treated with CH + 10 µM EBR, which exhibited lower weight loss (18.19%), respiration rate (7.72 mL CO₂ kg⁻¹ h⁻¹), electrolyte leakage (27.54%) and decay (12.5%), and maintained higher texture (10.8 N) and TSS (17.67 °Brix) compared to the untreated fruit with respective values of 24.32%, 18.06 mL CO₂ kg⁻¹ h⁻¹, 43.15%, 37.5%, 8.32 N and 17.03 °Brix. This was largely attributed to the significantly higher antioxidant content, including the ascorbic acid content, total phenol content, total anthocyanin content and DPPH (radical scavenging activity), of the coated fruit compared to the control fruit. Therefore, CH + 10 µM EBR treatment is recommended as a postharvest management strategy to improve the quality preservation of late-harvested pomegranate fruit during storage.

A facile approach for tuning optical and surface properties of novel biobased Alginate/POTE handleable films via solvent vapor exposure

Novel biobased films consisting of alginate blends with poly (octanoic acid 2-thiophen-3-yl-ethyl ester) (POTE), a conducting polymer, were prepared by solution casting, and their optical, morphological, thermal, and surface properties were studied. Using UV-visible spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM), the effects of tetrahydrofuran solvent vapors on the optical properties and surface morphology of biobased films with different POTE contents were studied. Results indicate that morphological rearrangements of POTE take place during the process of solvent exposure. Specifically, the solvent vapor induced the formation of POTE small crystalline domains, which allows envisioning the potential of tuning UV-visible absorbance and wettability behavior of biobased films. Finally, theoretical electronic calculations (specifically frontier molecular orbitals analysis) provided consistent evidence on POTE's preferential orientation and selectivity toward the THF-vapor medium.

Effect of Different Essential Oils on the Properties of Edible Coatings Based on Yam (Dioscorea rotundata L.) Starch and Its Application in Strawberry (Fragaria vesca L.) Preservation

Every year the world loses about 50% of fruits and vegetables post-harvest and in the supply chain. The use of biodegradable coatings and films with antioxidant properties has been considered an excellent alternative to extend the shelf life of food. Therefore, the objective of this work was to develop a coating based on yam (Dioscorea rotundata L.) starch-containing lime, fennel, and lavender essential oils to extend the shelf life of strawberries (Fragaria vesca l.). The tensile properties, barrier properties (water vapour permeability (WVP) and oxygen permeability (OP)), moisture content, water-solubility, absorption capacity, water contact angle, optical properties, the antioxidant activity of the resultant starch-based coatings were evaluated. After that, the active properties of the coatings were assessed on strawberries inoculated with Aspergillus niger during 14 days of storage at 25 °C. The results showed that the incorporation of essential oils improved the elongation and WVP and provided antioxidant capacity and antimicrobial activity in the films. In particular, the essential oil of lime showed higher antioxidant activity. This fact caused the unwanted modification of other properties, such as the decrease in tensile strength, elastic modulus and increase in OP. The present study revealed the potential use of lime, fennel, and lavender essential oils incorporated into a polymeric yam starch matrix to produce biodegradable active films (antioxidant and antimicrobial). Obtained films showed to be a viable alternative to increase the shelf life of strawberries and protect them against Aspergillus niger.

Synergistic Effect of Methyl Cellulose and Carvacrol Coating on Physicochemical and Microbial Attributes of Mango (Mangifera indica) Fruit in Postharvest Storage

Decay on mango (Mangifera indica) fruit mostly derived from a fungal disease which was caused by anthracnose invasion and infestation. The falling quality of mango fruit during postharvest preservation was commonly associated with weight loss, softening, vitamin C degradation and decay. This research evaluated the synergistic effect of methyl cellulose (MC) and carvacrol (Car) in the preparation of the edible coating on the physicochemical and microbial characteristics of mango fruit during 28 days of storage at 18°C. Five groups of coating treatments were prepared as follows: A (4% MC), B (4% MC + 0.5% Car), C (4% MC + 0.75% Car), D (4% MC + 1.0% Car), E (4% MC + 1.25% Car). These coating solutions were set 40°C for mango dipping. Mango fruits were individually dipped in the respected MC-Car solutions for 15 s and left out to air-condition for 30 min to create the coating film. These mango fruits were then kept at 18°C for 28 days. In 7 day-interval, experimental fruits were sampled to estimate weight loss, firmness, ascorbic acid content, decay index. Mango fruit pre-coated by 4% MC + 1.0% Car showed the least weight loss (1.61±0.03 %) and decay index (2.19±0.03 mark) while the highest retention of firmness (47.13±0.23 N) and ascorbic acid (25.60±0.13 mg/100 g) at the end of 28 days of storage. Results showed that incorporation of 1.0% carvacrol into 4% methyl cellulose-based edible coating would extend the shelf-life of mango fruit for 28 days of preservation. The edible coating would be a promising and green alternative with minimal environmental pollution.

Biocidal and biocompatible hybrid nanomaterials from biomolecule chitosan, alginate and ZnO

Biocidal activity and biocompatibility of nanomaterials (NMs) are crucial for healthcare applications. This study aims to develop biocidal hybrid NMs with high inhibition rates to control multidrug-resistant bacterial infection compared to conventional antibiotics. Herein, ZnO, chitosan-ZnO (CZnO) and alginate-ZnO (AZnO) NMs were synthesized via a simple one-pot technique. The one-pot process facilitates the efficiency of a chemical reaction whereby a reactant is subjected to successive chemical reactions in just one step. The resulted NMs bio-physicochemical features were analyzed using various analytical methods. The bactericidal and bacteriostatic mechanism of NMs strongly depends on the production of reactive oxygen species in NMs, due to their size, large surface areas, oxygen vacancies, ion release, and diffusion ability. The antibacterial potential of the NMs was tested against methicillin-resistant Staphylococcus aureus. The inhibition zone disclosed that the AZnO possessed an excellent antibacterial activity compared to ZnO and CZnO. Furthermore, toxicity studies revealed that the AZnO demonstrated low toxicity to the HepG2 cell lines. These results confirmed that the AZnO hybrid nanomaterials are promising futuristic biocidal agents suitable for the clinical and healthcare industries.