Applications of ultrasound in analysis, processing and quality control of food: A review

Improvement of the drying quality of blueberries by catalytic infrared blanching combined with ultrasound pretreatment

This paper investigated the effect of catalytic infrared blanching combined with ultrasound pretreatment on quality and waxy structure of blueberries. Different blueberry samples were prepared, including control (untreated) and samples treated by hot water blanching (HB), catalytic infrared blanching (CIB), ultrasound-catalytic infrared blanching (US-CIB), and catalytic infrared blanching-ultrasound (CIB-US). The effect of different pretreatments on the microstructure of blueberry epidermis was studied. The drying time of blueberries after HB, US-CIB, and CIB-US was decreased by 11.61%, 17.54%, and 17.27%, respectively, compared with control (33.75 h), and drying efficiency was significantly improved. Blueberries after pretreatments had higher content of polyphenol and anthocyanin, with an increase of 29.51-44.21% in phenol and 8.81-20.80% in anthocyanin, the antioxidant capacity of blueberries was also better than control and CIB enhanced the antioxidant capacity of blueberries. CIB-US can be used as an efficient pretreatment method for blueberry drying.

The role of sonication in developing synbiotic Beverages: A review

Synbiotics are a combination of probiotic cells and prebiotic components and this harmonious association has numerous health benefits. Conventional processing technologies use high temperatures for processing which reduces the viability and the final quality of synbiotic beverages. Sonication is a rapidly growing technology in the food processing sector and can be employed for the formulation of synbiotic beverages with improved functionalities. The cavitation events generated during the sonication result in beneficial effects like increased viability of probiotic cells, enhanced bifidogenic characteristics of prebiotic components, less processing time, and high-quality products. The sonication process does not affect the sensory attributes of synbiotic beverages however, it alters the structure of prebiotics thus increasing the access by the probiotics. These positive effects are solely dependent on the type of ultrasound process and the ultrasound operating parameters. The review aims to provide information on the technological aspects of ultrasound, a brief about synbiotics, details on the ultrasound process used for the formulation of synbiotics, the influence of ultrasound operating parameters, and a focus on the research gap.

Applications of high-intensity ultrasound on shrimp: Potential, constraints, and prospects in the extraction and retrieval of bioactive compounds, safety, and quality

The global shrimp market holds substantial prominence within the food industry, registering a significant USD 24.7 billion in worldwide exportation in 2020. However, the production of a safe and high-quality product requires consideration of various factors, including the potential for allergenic reactions, occurrences of foodborne outbreaks, and risks of spoilage. Additionally, the exploration of the recovery of bioactive compounds (e.g., astaxanthin [AX], polyunsaturated fatty acids, and polysaccharides) from shrimp waste demands focused attention. Within this framework, this review seeks to comprehend and assess the utilization of high-intensity ultrasound (HIUS), both as a standalone method and combined with other technologies, within the shrimp industry. The objective is to evaluate its applications, limitations, and prospects, with a specific emphasis on delineating the impact of sonication parameters (e.g., power, time, and temperature) on various applications. This includes an examination of undesirable effects and identifying areas of interest for current and prospective research. HIUS has demonstrated promise in enhancing the extraction of bioactive compounds, such as AX, lipids, and chitin, while concurrently addressing concerns such as allergen reduction (e.g., tropomyosin), inactivation of pathogens (e.g., Vibrio parahaemolyticus), and quality improvement, manifesting in reduced melanosis scores and improved peelability. Nonetheless, potential impediments, particularly related to oxidation processes, especially those associated with lipids, pose a hindrance to its widespread implementation, potentially impacting texture properties. Consequently, further optimization studies remain imperative. Moreover, novel applications of sonication in shrimp processing, including brining, thawing, and drying, represent a promising avenue for expanding the utilization of HIUS in the shrimp industry.

Optimal ultrasonic treatment frequency and duration parameters were used to detect the pathogenic bacteria of orthopedic implant-associated infection by ultrasonic oscillation

INTRUDUCTON

The most accurate method for detecting the pathogen of orthopedic implant-associated infections (OIAIs) is sonication fluid (SF). However, the frequency and duration of ultrasound significantly influence the number and activity of microorganisms. Currently, there is no consensus on the selection of these two parameters. Through this study, the choice of these two parameters is clarified.

METHODS

We established five ultrasonic groups (40kHz/10min, 40kHz/5min, 40 kHz/1min, 20kHz/5min, and 10kHz/5min) based on previous literature. OIAIs models were then developed and applied to ultrasound group treatment. Subsequently, we evaluated the efficiency of bacteria removal by conducting SEM and crystal violet staining. The number of live bacteria in the SF was determined using plate colony count and live/dead bacteria staining.

RESULTS

The results of crystal violet staining revealed that both the 40kHz/5min group and the 40kHz/10min group exhibited a significantly higher bacterial clearance rate compared to the other groups. However, there was no significant difference between the two groups. Additionally, the results of plate colony count and fluorescence staining of live and dead bacteria indicated that the number of live bacteria in the 40kHz/5min SF group was significantly higher than in the other groups.

CONCLUSION

40kHz/5min ultrasound is the most beneficial for the detection of pathogenic bacteria on the surface of orthopedic implants.

The present state and future outlook of pectin-based nanoparticles in the stabilization of Pickering emulsions

The stabilization of Pickering emulsions using micro/nanoparticles has gained significant attention due to their wide range of potential applications in industries such as cosmetics, food, catalysis, tissue engineering, and drug delivery. There is a growing demand for the development of environmentally friendly micro/nanoparticles to create stable Pickering emulsions. Naturally occurring polysaccharides like pectin offer promising options as they can assemble at oil/water interfaces. This polysaccharide is considered a green candidate because of its biodegradability and renewable nature. The physicochemical properties of micro/nanoparticles, influenced by fabrication methods and post-modification techniques, greatly impact the characteristics and applications of the resulting Pickering emulsions. This review focuses on recent advancements in Pickering emulsions stabilized by pectin-based micro/nanoparticles, as well as the application of functional materials in delivery systems, bio-based films and 3D printing using these emulsions as templates. The effects of micro/nanoparticle properties on the characteristics of Pickering emulsions and their applications are discussed. Additionally, the obstacles that currently hinder the practical implementation of pectin-based micro/nanoparticles and Pickering emulsions, along with future prospects for their development, are addressed.

Ultrasound modification on milk fat globule membrane and soy lecithin to improve the physicochemical properties, microstructure and stability of mimicking human milk fat emulsions

Starting from the consideration of the structure of human milk fat globule (MFG), this study aimed to investigate the effects of ultrasonic treatment on milk fat globule membrane (MFGM) and soy lecithin (SL) complexes and their role in mimicking human MFG emulsions. Ultrasonic power significantly affected the structure of the MFGM-SL complex, further promoting the unfolding of the molecular structure of the protein, and then increased solubility and surface hydrophobicity. Furthermore, the microstructure of mimicking MFG emulsions without sonication was unevenly distributed, and the average droplet diameter was large. After ultrasonic treatment, the droplets of the emulsion were more uniformly dispersed, the particle size was smaller, and the emulsification properties and stability were improved to varying degrees. Especially when the ultrasonic power was 300 W, the mimicking MFG emulsion had the highest encapsulation rate and emulsion activity index and emulsion stability index were increased by 60.88 % and 117.74 %, respectively. From the microstructure, it was observed that the spherical droplets of the mimicking MFG emulsion after appropriate ultrasonic treatment remain well separated without obvious flocculation. This study can provide a reference for the screening of milk fat globules mimicking membrane materials and the further utilization and development of ultrasound in infant formula.

Characterization and prebiotic potential of polysaccharides from Rosa roxburghii Tratt pomace by ultrasound-assisted extraction

In this study, polysaccharides (RRTPs) were extracted from Rosa roxburghii Tratt pomace by hot water or ultrasound (US)-assisted extraction. The structural properties and potential prebiotic functions of RRTPs were investigated. Structural characterization was conducted through HPAEC, HPGPC, GC-MS, FT-IR and SEM. Chemical composition analysis revealed that RRTPs extracted by hot water (RRTP-HW) or US with shorter (RRTP-US-S) or longer duration (RRTP-US-L) all consisted of galacturonic acid, galactose, glucose, arabinose, rhamnose and glucuronic acid in various molar ratio. US extraction caused notable reduction in molecular weight of RRTPs but no significant changes in primary structures. Fecal fermentation showed RRTPs could reshape microbial composition toward a healthier balance, leading to a higher production of beneficial metabolites including total short-chain fatty acids, curcumin, noopept, spermidine, 3-feruloylquinic acid and citrulline. More beneficial shifts in bacterial population were observed in RRTP-HW group, while RRTP-US-S had stronger ability to stimulate bacterial short-chain fatty acids production. Additionally, metabolic profiles with the intervention of RRTP-HW, RRTP-US-S or RRTP-US-L were significantly different from each other. The results suggested RRTPs had potential prebiotic effects which could be modified by power US via molecular weight degradation.

Effect of non-thermal ultraviolet and ultrasound technologies on disinfection of meat preparation equipment in catering industry

In recent years, ultraviolet and ultrasound treatments are gaining attraction as promising green decontamination technologies to ensure microbial safety in food industry. Decontamination by ultraviolet light is a physical process defined by the transfer of electromagnetic energy from a light source to an organism's cellular material and depended on the emission of radiation in the ultraviolet region (100-400 nm), specifically the UV-C region (200-280 nm) which has been demonstrated to be germicidal. Ultrasound technology is defined as sound waves with high and low frequency beyond the limit of human hearing and shows a decontamination effect that occurs as a consequence of cavitation at high power (low frequency) in general. In the present study, it was aimed to determine the effectiveness of ultraviolet light (254 nm, 10 min) and high frequency ultrasound techniques (40 kHz, 10 min) in reducing total aerobic mesophilic bacteria, yeast and mold, Esherichia coli/coliform and Salmonella spp. on the equipment surfaces used in the catering facility. For this purpose, the equipment (cutting knife, meat grinder knife, knife sharpener, cut-proof glove) used in the meat preparation department of catering facility were selected for the treatments. According to the results, appreciable reductions were achieved in total aerobic mesophilic bacterial counts of the ultraviolet treated samples (maximum difference 2.61 log cfu/cm2) and the ultrasound treated samples (maximum difference 4.07 log cfu/cm2). After ultraviolet treatment, Salmonella spp. were totally inhibited on the contaminated surfaces. Furthermore, Escherichia coli/coliform was not detected in the samples after both treatments whereas it was detected before the treatments. It has been concluded that the techniques are effective in reducing microbiological load and also ultraviolet treatment is effective on pathogenic microorganisms on food contact surfaces. As a result, the ultraviolet and ultrasound techniques are effective treatments for equipment disinfection in the catering sector and can be used industrially as it gives successful results.

Artificial oil bodies: A review on composition, properties, biotechnological applications, and improvement methods

In order to simulate the structure of natural oil body, artificial oil bodies (AOBs) are fabricated by the integration of oleosins, triacylglycerols (TAGs) and phospholipids (PLs) in vitro. Recently, AOBs have gained great research interest both in the food and biological fields due to its ability to act as a novel delivery system for bioactive compounds and as a carrier for target proteins. This review aims to summarize the composition and the preparation methods of AOBs, examine the factors influencing their stability. Moreover, this contribution focusses on exploring the application of AOBs to encapsulate functional ingredients that are prone to oxidation as well as improve efficiency involved in protein purification, renaturation and immobilization by reducing the complex steps. In addition, the improvement measures to further enhance the stability and efficacy of AOBs are also discussed. The application of AOBs is expected to be a big step towards replacing existing bioreactors and delivery systems.

A review of the world's salt reduction policies and strategies - preparing for the upcoming year 2025

Excessive consumption of dietary sodium is a significant contributor to non-communicable diseases, including hypertension and cardiovascular disease. There is now a global consensus that regulating salt intake is among the most cost-effective measures for enhancing public health. More than half of the countries worldwide have implemented multiple strategies to decrease salt consumption. Nevertheless, a report on sodium intake reduction published by the World Health Organization revealed that the world is off-track to meet its targeted reduction of 30% by 2025. The global situation regarding salt reduction remains concerning. This review will center on domestic and international salt reduction policies, as well as diverse strategies, given the detrimental effects of excessive dietary salt intake and the existing global salt intake scenario. Besides, we used visualization software to analyze the literature related to salt reduction research in the last five years to explore the research hotspots in this field. Our objective is to enhance public awareness regarding the imperative of reducing salt intake and promoting the active implementation of diverse salt reduction policies.

New insights into bee pollen: Nutrients, phytochemicals, functions and wall-disruption

Bee pollen is hailed as a treasure trove of human nutrition and has progressively emerged as the source of functional food and medicine. This review conducts a compilation of nutrients and phytochemicals in bee pollen, with particular emphasis on some ubiquitous and unique phenolamides and flavonoid glycosides. Additionally, it provides a concise overview of the diverse health benefits and therapeutic properties of bee pollen, particularly anti-prostatitis and anti-tyrosinase effects. Furthermore, based on the distinctive structural characteristics of pollen walls, a substantial debate has persisted in the past concerning the necessity of wall-disruption. This review provides a comprehensive survey on the necessity of wall-disruption, the impact of wall-disruption on the release and digestion of nutrients, and wall-disruption techniques in industrial production. Wall-disruption appears effective in releasing and digesting nutrients and exploiting bee pollen's bioactivities. Finally, the review underscores the need for future studies to elucidate the mechanisms of beneficial effects. This paper will likely help us gain better insight into bee pollen to develop further functional foods, personalized nutraceuticals, cosmetics products, and medicine.

Recent advancements in the utilization of ultrasonic technology for the curing of processed meat products: A comprehensive review

Curation meat products involves multiple stages, including pre-curing processing (thawing, cleaning, and cutting), curing itself, and post-curing processing (freezing, and packaging). Ultrasound are nonthermal processing technology widely used in food industry. This technology is preferred because it reduces the damages caused by traditional processing techniques on food, while simultaneously improving the nutritional properties and processing characteristics of food. The utilization of ultrasonic-assisted curing technology has attracted significant attention within the realm of meat product curing, encouraging extensive research efforts. In terms of curing meat products, ultrasonic-assisted curing technology has been widely studied due to its advantages of accelerating the curing speed, reducing nutrient loss, and improving the tenderness of cured meats. Therefore, this article aims to comprehensively review the application and mechanism of ultrasound technology in various stages of meat product curing. Furthermore, it also elaborates the effects of ultrasonic-assisted curing on the tenderness, water retention, and flavor substances of the meat products during the curing process. Besides, the implication of the ultrasound in the processing of meat curation plays a potent role together with other technologies or methods. The use of ultrasound technology in the process of meat curation was analyzed, which might be a theoretical insight for the industrialization prospects of the meat product.

Pulsed electric field for shalgam juice: effects on fermentation, shelf-life, and sensory quality

BACKGROUND

Pulsed electric field (PEF) has become a reality in the food industry as a non-thermal application. PEF is used due to its benefits such as increasing the extraction of anthocyanin or other bioactive substances, shortening the fermentation time, and reducing the microbiological load by electroporation. This study aimed to determine the effect of PEF pretreatment on the fermentation, chemical, microbiological, and sensory properties of shalgam juice. For this purpose, PEF with 1 kV cm-1 of field strength was used as a pretreatment for shalgam juice and changes in control and PEF-treated samples were monitored during fermentation and 70 days of cold storage (4 °C).

RESULTS

The pH and lactic acid content during fermentation were similar for both samples. The effect of PEF on pH (3.15-3.39), titratable acidity (4.35-5.49 g L-1 ), total phenolic content (279-766 mg mL-1 GAE) and antioxidant activity (694-2091 μmol Trolox mL-1 ) during storage was insignificant. PEF-treated samples had lower total aerobic mesophilic bacteria (~9%) and lactic acid bacteria (~3%) counts than the control samples at the end of 70 days. Sensory analyses performed at 30th and 60th days of storage with 74 panelists revealed that the color, taste, sourness, saltiness, bitterness, and general acceptability were not inversely affected by PEF.

CONCLUSION

Our results could be a basis to produce shalgam juice commercially by PEF treatment. Although more studies with new experimental designs should be carried out, preliminary results indicated that the use of PEF might have a potential for fermented products such as shalgam juices. © 2023 Society of Chemical Industry.

Transglutaminase-induced soybean protein isolate cold-set gels treated with combination of ultrasound and high pressure: Physicochemical properties and structural characterization

Soybean protein isolate (SPI) was treated by the combined exposure to ultrasound and high pressure and then subjected to transglutaminase (TGase)-catalyzed cross-linking to prepare SPI cold-set gels. The effects of combined treatments on physicochemical and structural properties of TGase-induced SPI cold-set gels were investigated. The combination of ultrasound and high pressure promoted the covalent disulfide bonds and ε-(γ-glutaminyl) lysine isopeptide bonds as well as non-covalent hydrophobic interactions, which further improved the gelation properties of SPI compared to ultrasound or high pressure alone. In particular, the 480 W ultrasound followed by high pressure treatment of gels led to higher strength (120.53 g), water holding capacity (95.39 %), immobilized water (93.92 %), lightness (42.18), whiteness (51.03), and elasticity (G' = 407 Pa), as well as more uniform and compact microstructure, thus resulting in the improved gel network structure. The combination of two treatments produced more flexible secondary structure, tighter tertiary conformation and higher denaturation degree of protein in the gels, leading to more stable gel structure. The structural modifications of SPI contributed to the improvement of its gelation properties. Therefore, the combined application of ultrasound and high pressure can be an effective method for improving the structure and properties of TGase-induced SPI cold-set gels.

How does ultrasound contribute to the migration of extractives inside Ailanthus altissima wood?

Extractives have an impact on the processing and commercial value of wood. Ultrasound is an environmentally friendly technology commonly employed to reduce the extractive content and thus enhance the permeability of wood. This study aimed to understand the migration mechanism of extractives inside wood during ultrasonic treatment, which may help to obtain the desired wood properties. The extractive distribution of Ailanthus altissima was observed by using stereo microscopy, optical microscopy, and scanning electron microscopy, the extractive content was determined, and the relationship between the concentration of water-soluble extractives and absorbance was measured using a UV/Vis spectrophotometer, and the migration model of extractives was studied using layered extraction by innovatively combining the weight and the absorbance methods. The results revealed that the extractives were predominantly distributed in the vessels and diminished after ultrasonic treatment. The extractive content gradually decreased over time (0 ∼ 5 h), with a rapid decline observed within the first 2 h. The concentration of the water-soluble extractives exhibited a proportional relationship with the absorbance. Through the comparison of the layered-extractive concentration, accumulating evidence suggested that the migration of the extractives was a dynamic process, which included the extractives migrating towards easy-extracted area, moving along the direction of ultrasound propagation inside the wood, and leaching out of wood during ultrasonic treatment.

Plackett-Burman design in the biosynthesis of silver nanoparticles with Mutisia acuminatta (Chinchircoma) and preliminary evaluation of its antibacterial activity

Background: The aim of this study was to synthesize silver nanoparticles (AgNPs) using the methanolic fraction of Mutisia acuminatta leaves using Plackett-Burman design to optimize process parameters and to evaluate its antibacterial effect. Methods: For the separation of Mutisia acuminatta phytoconstituents, chromatographic techniques were used. For characterization and identification, UV - VIS spectrophotometry, FTIR spectrophotometry, Dynamic Light Scattering (DLS) and transmission electron microscopy (TEM) were used. The Plackett-Burman design used polynomial regression statistical analysis to determine the most influential variables. Results: UV-VIS spectroscopy reported an absorbance concerning surface plasmon resonance between 410-420 nm wavelength for the AgNPs. FTIR spectrophotometry reported characteristic peaks in the biosynthesized AgNPs, observing the disappearance of spectral peaks between 1000-1500 cm -1. By UHPLC-MS, caffeic acid derivatives, coumarins, flavonoids, lignans, disaccharide and a complex formed between silver and the solvent (AgCH3CN+) were identified. Using DLS, the AgNPs presented an average hydrodynamic size of 45.91 nm. TEM determined the spherical shape of the AgNPs, presenting diameters in the range of 30 to 60 nm. The biosynthesized AgNPs showed higher antibacterial activity against Escherichia coli and Staphylococcus aureus than the total extract, the methanolic fraction and pure methanol. The polynomial model in the biosynthesis was validated with an adequate fitting representing the experimental data of the process. The most significant variables for the model obtained were the reaction pH (X 2) and the concentration of the precursor salt AgNO 3 (X 6). Conclusions: The synthesized AgNPs offer a viable option for further development due to the presence of bioactive compounds, adequate characterization and antibacterial activity.

Polyphenol removal with ultrasound-assisted ethanol extraction from defatted walnut powder: optimization of conditions and effect on functional properties of protein isolates

BACKGROUND

Walnut kernels are high in polyphenols (PPs), which cause low protein solubility, limiting the use of walnut protein in the food industry. To obtain the best technical parameters of the dephenolization treatment, the defatted walnut powder was dephenolized using ultrasound-assisted ethanol extraction (UAE), and the response surface optimization was performed on the basis of single factor. On this basis, the effects of dephenolization on the solubility, emulsifying properties and foaming properties of walnut protein isolates (WPIs) were compared to those of defatted walnut powder without dephenolization.

RESULTS

The results showed that PP extraction in the UAE could significantly increase PP yield. The optimal process parameters were as follows: 51% (v/v) ethanol concentration, 140 W ultrasound power, 10 min extraction time, 30 °C ultrasound temperature, and a material-liquid ratio of 1:30 (w/v). The results revealed that the UAE dephenolization treatment significantly improved the functionality of WPI and that the functionality of the dephenolized WPI by UAE was superior to that of the protein without dephenolization, and that the functionality of both walnut proteins was the worst at pH 5, with solubility of 5.31% and 4.86%, emulsifying activity index (EAI) of 24.95 and 19.91 m2 /g, and foaming capacity (FC) of 3.66% and 2.94%, respectively; and the best at pH 11, with solubility of 82.35% and 73.55%, EAI of 46.35 and 37.28 m2 /g, and FC of 35.85% and 18.87%, respectively.

CONCLUSION

The study found that dephenolization by UAE can significantly improve the functionality of WPI, and this method should be promoted and used in walnut and walnut protein processing industries. © 2023 Society of Chemical Industry.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation

BACKGROUND

Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization.

SCOPE AND APPROACH

This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed.

KEY FINDINGS AND CONCLUSIONS

The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Effect of ultrasound on mass transfer during vacuum impregnation and selected quality parameters of products: A case study of carrots

Many unit operations in the food industry are diffusional driven. These processes are usually very slow and difficult to handle for specific groups of raw materials. Vacuum impregnation (VI) is one example. Impregnating low-porous or densely-structured materials is problematic and often requires low pressure, which can negatively affect product quality and be expensive in energy consumption. This research aimed to evaluate ultrasound (US) as a factor in intensifying mass transfer and enhancing its effectiveness in the VI process. Experiments on impregnation enhanced with ultrasound applied at different stages of the process were carried out. Carrot, a difficult-to-process raw material, was impregnated with ascorbic acid as a mass transfer marker. The process's effectiveness and selected quality parameters were then analyzed. Ultrasound was found to have a positive influence on mass transfer during VI. The effects of ultrasound enhancement were different for particular processes, and depended on the stage of the application and duration of US exposure. The greatest increase in the tissue's ascorbic acid content (60% compared to the non-ultrasound-assisted process) was observed when ultrasound was applied continuously throughout the process. Applying ultrasound only during the relaxation (at atmospheric pressure) or aeration periods resulted in a similar effect - c.a. 20% increase in the marker's content. The smallest increase (10%) was observed when ultrasound was applied only during the vacuum period. Applying US did not result in any unfavorable color change. In most cases, pH decreased, which is favorable for the semi-product's stability. The carotenoid and phenolic compounds' content did not decrease. The results unequivocally indicate that ultrasound has great potential for use as a mass transfer accelerator in the VI process for low porosity materials. The effectiveness of the US is influenced not only by pressure but also by exposure duration. The synergistic effect observed using ultrasound-enhanced impregnation throughout the process confirmed this hypothesis.

Effect of ultrasound and microwave treatment on the level of volatile compounds, total polyphenols, total flavonoids, and isoflavones in soymilk processed with black soybean (Glycine max (L.) Merr.)

This study analyzed the effect of ultrasound treatment (up to 9 min, 20 kHz, 130 W) on the volatile compounds, total polyphenols, total flavonoids, and isoflavones (daidzein, genistein, daidzin, genistin, and glycitin) in soymilk processed with microwave-roasted (700 W for 270 s) black soybean (Glycine max (L.) Merr.). 1-Hexanol and 1-octen-3-ol, unpleasant soybean flavors, were found to decrease by up to 96.13% and 93.04%, respectively, in ultrasound-treated soymilk compared to the control. 2,3-Diethyl-5-methylpyrazine, a baked flavor, which exhibited the highest odor impact ratio in soymilk processed with microwave-roasted soybean, increased significantly during ultrasound treatment (p < 0.05). The content of total isoflavones, polyphenols, and flavonoids increased (p < 0.05) with the increase in ultrasound treatment time. Spearman's correlation analysis showed that browning was positively correlated (p < 0.01) with total phenols, total furans, total pyrazines, total polyphenols, and total isoflavones. This study discusses the applicability of microwave-roasted soybeans for improving the volatile profile and bioactive compounds in soymilk and provides information on the effects of ultrasound treatment on the volatile compounds, total polyphenols, flavonoids, and isoflavones in soymilk.

A Bibliometric Analysis for Low-Intensity Ultrasound Study Over the Past Three Decades

Low-intensity ultrasound (LI-US) is a non-invasive stimulation technique that has emerged in recent years and has been shown to have positive effects on neuromodulation, fracture healing, inflammation improvement, and metabolic regulation. This study reports the conclusions of a bibliometric analysis of LI-US. Input data for the period between 1995 and 2022, including 7209 related articles in the field of LI-US, were collected from the core library of the Web of Science (WOS) database. Using these data, a set of bibliometric indicators was obtained to gain knowledge on different aspects: global production, research areas, and sources analysis, contributions of countries and institutions, author analysis, citation analysis, and keyword analysis. This study combined the data analysis capabilities provided by the WOS database, making use of two bibliometric software tools: R software and VOS viewer to achieve analysis and data exploration visualization, and predicted the further development trends of LI-US. It turns out that the United States and China are co-leaders while Zhang ZG is the most significant author in LI-US. In the future, the hot spots of LI-US will continue to focus on parameter research, mechanism discussion, safety regulations, and neuromodulation applications.

Comparison of the efficacy of physical and chemical strategies for the inactivation of biofilm cells of foodborne pathogens

Biofilm formation is a strategy in which microorganisms generate a matrix of extracellular polymeric substances to increase survival under harsh conditions. The efficacy of sanitization processes is lowered when biofilms form, in particular on industrial devices. While various traditional and emerging technologies have been explored for the eradication of biofilms, cell resistance under a range of environmental conditions renders evaluation of the efficacy of control challenging. This review aimed to: (1) classify biofilm control measures into chemical, physical, and combination methods, (2) discuss mechanisms underlying inactivation by each method, and (3) summarize the reduction of biofilm cells after each treatment. The review is expected to be useful for future experimental studies and help to guide the establishment of biofilm control strategies in the food industry.

Detection and prevention of foreign material in food: A review

This review highlights the critical concern foreign material contamination poses across the food processing industry and provides information on methods and implementations to minimize the hazards caused by foreign materials. A foreign material is defined as any non-food, foreign bodies that may cause illness or injury to the consumer and are not typically part of the food. Foreign materials can enter the food processing plant as part of the raw materials such as fruit pits, bones, or contaminants like stones, insects, soil, grit, or pieces of harvesting equipment. Over the past 20 years, foreign materials have been responsible for about one out of ten recalls of foods, with plastic fragments being the most common complaint. The goal of this paper is to further the understanding of the risks foreign materials are to consumers and the tools that could be used to minimize the risk of foreign objects in foods.

Application of novel pretreatment technologies for intensification of drying performance and quality attributes of food commodities: a review

Drying is an energy-intensive process that can be reduced by the application of pretreatment prior to drying to enhance mass transfer and minimize energy consumption. This review summarizes the mechanistic aspects and applications of emerging pretreatment approaches, namely ohmic heating (OH), ultrasound (US), high pressure processing (HPP), and pulsed electric field (PEF), with emphasis on the enhancement of mass transfer and quality attributes of foods. Novel pretreatments significantly improved the drying efficiency by increasing mass transfer, cavitation, and microchannel formation within the cell structure. Various processing parameters have great influence on the drying performance and quality attributes of foods. Several studies have shown that novel pretreatments (individual and combined) can significantly save energy while improving the overall drying performance and retaining the quality attributes. This work would be useful for understanding the mechanisms of novel pretreatment technologies and their applications for future commercial research and development activities.

Nanocellulose-stabilized Pickering emulsions: Fabrication, stabilization, and food applications

Pickering emulsions have been widely studied due to their good stability and potential applications. Nanocellulose including cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial cellulose nanofibrils (BCNFs) has emerged as sustainable stabilizers/emulsifiers in food-related Pickering emulsions due to their favorable properties such as renewability, low toxicity, amphiphilicity, biocompatibility, and high aspect ratio. Nanocellulose can be widely obtained from different sources and extraction methods and can effectively stabilize Pickering emulsions via the irreversible adsorption onto oil-water interface. The synergistic effects of nanocellulose and other substances can further enhance the interfacial networks. The nanocellulose-based Pickering emulsions have potential food-related applications in delivery systems, food packaging materials, and fat substitutes. Nanocellulose-based Pickering emulsions as 3D printing inks exhibit good injectable and gelling properties and are promising to print spatial architectures. In the future, the utilization of biomass waste and the development of "green" and facile extraction methods for nanocellulose production deserve more attention. The stability of nanocellulose-based Pickering emulsions in multi-component food systems and at various conditions is an utmost challenge. Moreover, the case-by-case studies on the potential safety issues of nanocellulose-based Pickering emulsions need to be carried out with the standardized assessment procedures. In this review, we highlight key fundamental work and recent reports on nanocellulose-based Pickering emulsion systems. The sources and extraction of nanocellulose and the fabrication of nanocellulose-based Pickering emulsions are briefly summarized. Furthermore, the synergistic stability and food-related applications of nanocellulose-stabilized Pickering emulsions are spotlighted.

Biomaterials and Encapsulation Techniques for Probiotics: Current Status and Future Prospects in Biomedical Applications

Probiotics have garnered significant attention in recent years due to their potential advantages in diverse biomedical applications, such as acting as antimicrobial agents, aiding in tissue repair, and treating diseases. These live bacteria must exist in appropriate quantities and precise locations to exert beneficial effects. However, their viability and activity can be significantly impacted by the surrounding tissue, posing a challenge to maintain their stability in the target location for an extended duration. To counter this, researchers have formulated various strategies that enhance the activity and stability of probiotics by encapsulating them within biomaterials. This approach enables site-specific release, overcoming technical impediments encountered during the processing and application of probiotics. A range of materials can be utilized for encapsulating probiotics, and several methods can be employed for this encapsulation process. This article reviews the recent advancements in probiotics encapsulated within biomaterials, examining the materials, methods, and effects of encapsulation. It also provides an overview of the hurdles faced by currently available biomaterial-based probiotic capsules and suggests potential future research directions in this field. Despite the progress achieved to date, numerous challenges persist, such as the necessity for developing efficient, reproducible encapsulation methods that maintain the viability and activity of probiotics. Furthermore, there is a need to design more robust and targeted delivery vehicles.

Synergistic effect of ultrasound and antimicrobial solutions of cecropin P1 in the deactivation of Escherichia coli O157:H7 using a cylindrical ultrasonic system

This study investigates the synergistic effect of ultrasonication and antimicrobial action of antimicrobial peptide cecropin P1 on the inactivation of Escherichia coli O157:H7 in a cylindrical ultrasonication system. The inactivation of E. coli at pH 7.4 was performed using: ultrasonication (14, 22, and 47 kHz), cecropin P1 (20 µg/mL), and a combination of both. We found the treatment at 22 kHz, 8W for 15 min of exposure and a combination of ultrasound at higher frequency (47 kHz, 8 W) and cecropin P1 for one minute of exposure were more efficient, reducing the cell density by six orders of magnitude, compared to individual treatments (ultrasound or cecropin P1 only). Dye leakage studies and transmission electron microscopy further validated these results. A continuous flow system was designed to demonstrate synergism of ultrasonication with antimicrobial peptide Cecropin P1 in the inactivation of E. coli; synergism was shown to be more at higher ultrasonication frequencies and power levels. Acoustic cavitation by ultrasonic treatment could drastically improve microbial deactivation by antimicrobial peptides cecropin P1 by increasing their ability for pore formation in cell membranes. A continuous ultrasonication and antimicrobial peptides system can lead to an energy-efficient and economical sterilization system for food safety applications.

Microbial decontamination assisted by ultrasound-based processing technologies in food and model systems: A review

Ultrasound (US) technology is recognized as one of the emerging technologies that arise from the current trends for improving nutritional and organoleptic properties while providing food safety. However, when applying the US alone, higher power and longer treatment times than conventional thermal treatments are needed to achieve a comparable level of microbial inactivation. This results in risks, damaging food products' composition, structure, or sensory properties, and can lead to higher processing costs. Therefore, the US has often been investigated in combination with other approaches, like heating at mild temperatures and/or treatments at elevated pressure, use of antimicrobial substances, or other emerging technologies (e.g., high-pressure processing, pulsed electric fields, nonthermal plasma, or microwaves). A combination of US with different approaches has been reported to be less energy and time consuming. This manuscript aims to provide a broad review of the microbial inactivation efficacy of US technology in different food matrices and model systems. In particular, emphasis is given to the US in combination with the two most industrially viable physical processes, that is, heating at mild temperatures and/or treatments at elevated pressure, resulting in techniques known as thermosonication, manosonication, and manothermosonication. The available literature is reviewed, and critically discussed, and potential research gaps are identified. Additionally, discussions on the US's inactivation mechanisms and lethal effects are included. Finally, mathematical modeling approaches of microbial inactivation kinetics due to US-based processing technologies are also outlined. Overall, this review focuses only on the uses of the US and its combinations with other processes relevant to microbial food decontamination.

Production of secondary metabolites using tissue culture-based biotechnological applications

Plants are the sources of many bioactive secondary metabolites which are present in plant organs including leaves, stems, roots, and flowers. Although they provide advantages to the plants in many cases, they are not necessary for metabolisms related to growth, development, and reproduction. They are specific to plant species and are precursor substances, which can be modified for generations of various compounds in different plant species. Secondary metabolites are used in many industries, including dye, food processing and cosmetic industries, and in agricultural control as well as being used as pharmaceutical raw materials by humans. For this reason, the demand is high; therefore, they are needed to be obtained in large volumes and the large productions can be achieved using biotechnological methods in addition to production, being done with classical methods. For this, plant biotechnology can be put in action through using different methods. The most important of these methods include tissue culture and gene transfer. The genetically modified plants are agriculturally more productive and are commercially more effective and are valuable tools for industrial and medical purposes as well as being the sources of many secondary metabolites of therapeutic importance. With plant tissue culture applications, which are also the first step in obtaining transgenic plants with having desirable characteristics, it is possible to produce specific secondary metabolites in large-scale through using whole plants or using specific tissues of these plants in laboratory conditions. Currently, many studies are going on this subject, and some of them receiving attention are found to be taken place in plant biotechnology and having promising applications. In this work, particularly benefits of secondary metabolites, and their productions through tissue culture-based biotechnological applications are discussed using literature with presence of current studies.

Ultrasonic Wave Mode-Based Application for Contactless Density Measurement of Highly Aerated Batters

An ultrasonic wave mode-based method for density measurement in highly foamed batters was developed. Therefore, a non-contact ultrasonic sensor system was designed to generate signals for batch-wise processes. An ultrasonic sensor, containing a piezoelectric ceramic at the fundamental longitudinal frequency of 2 MHz, was used to take impedance measurements in pulse-echo mode. The ultrasonic signals were processed and analysed wave-mode wise, using a feature-driven approach. The measurements were carried out for different mixing times within a container, with the attached ultrasonic sensor. Within the biscuit batter, the change to the ultrasonic signals caused by density changes during the batter-mixing process was monitored (R² = 0.96). The density range detected by the sensor ranges between 500 g/L and 1000 g/L. The ultrasonic sensor system developed also shows a reasonable level of accuracy for the measurements of biscuit batter variations (R² > 0.94). The main benefit of this novel technique, which comprises multiple wave modes for signal features and combines these features with the relevant process parameters, leads to a more robust system as regards to multiple interference factors.

Ultrasonic treatment to enhance seed germination and vigour of wheat (Triticum durum) in association with γ-aminobutyric acid (GABA) shunt pathway

Treatments of wheat (Triticum durum L.) seeds with sonication or hydropriming may enhance seed germination and vigour in association with γ-aminobutyric acid (GABA). Therefore, the objective of this study is to examine the effect of sonication and hydropriming treatments on seed germination of wheat through the characterisation of seed germination performance, GABA shunt metabolite level (GABA, glutamate, and alanine), and the level of glutamate decarboxylase (GAD) mRNA transcription. Wheat seeds were exposed to three treatments for 0, 5, 10, 15, and 20min: (1) sonication with water; (2) sonication without water; and (3) hydropriming without sonication. Treated seeds were evaluated for germination percentage, mean time to germinate, germination rate index in the warm germination test, and seedling emergence and shoot length in the cold test. GABA shunt metabolites level (GABA, glutamate, and alanine), and the level of GAD mRNA transcription were measured for the seeds after treatments and for seedlings during germination and cold tests. Seeds treated with sonication or hydropriming treatments had a higher germination rate index (faster germination) in the standard germination test, and higher seedling emergence and shoot length in the cold test. Seeds treated with sonication or hydropriming treatments showed an enhancement in GABA shunt and their metabolites (alanine and glutamate), and GAD mRNA transcription level compared to untreated-control seeds. In conclusion, the sonication or hydropriming treatments significantly improved the germination performance of wheat and enhanced GABA metabolism to maintain the C:N metabolic balance, especially under cold stress.

MultiomicsTracks96: A high throughput PIXUL-Matrix-based toolbox to profile frozen and FFPE tissues multiomes

Background

The multiome is an integrated assembly of distinct classes of molecules and molecular properties, or "omes," measured in the same biospecimen. Freezing and formalin-fixed paraffin-embedding (FFPE) are two common ways to store tissues, and these practices have generated vast biospecimen repositories. However, these biospecimens have been underutilized for multi-omic analysis due to the low throughput of current analytical technologies that impede large-scale studies.

Methods

Tissue sampling, preparation, and downstream analysis were integrated into a 96-well format multi-omics workflow, MultiomicsTracks96. Frozen mouse organs were sampled using the CryoGrid system, and matched FFPE samples were processed using a microtome. The 96-well format sonicator, PIXUL, was adapted to extract DNA, RNA, chromatin, and protein from tissues. The 96-well format analytical platform, Matrix, was used for chromatin immunoprecipitation (ChIP), methylated DNA immunoprecipitation (MeDIP), methylated RNA immunoprecipitation (MeRIP), and RNA reverse transcription (RT) assays followed by qPCR and sequencing. LC-MS/MS was used for protein analysis. The Segway genome segmentation algorithm was used to identify functional genomic regions, and linear regressors based on the multi-omics data were trained to predict protein expression.

Results

MultiomicsTracks96 was used to generate 8-dimensional datasets including RNA-seq measurements of mRNA expression; MeRIP-seq measurements of m6A and m5C; ChIP-seq measurements of H3K27Ac, H3K4m3, and Pol II; MeDIP-seq measurements of 5mC; and LC-MS/MS measurements of proteins. We observed high correlation between data from matched frozen and FFPE organs. The Segway genome segmentation algorithm applied to epigenomic profiles (ChIP-seq: H3K27Ac, H3K4m3, Pol II; MeDIP-seq: 5mC) was able to recapitulate and predict organ-specific super-enhancers in both FFPE and frozen samples. Linear regression analysis showed that proteomic expression profiles can be more accurately predicted by the full suite of multi-omics data, compared to using epigenomic, transcriptomic, or epitranscriptomic measurements individually.

Conclusions

The MultiomicsTracks96 workflow is well suited for high dimensional multi-omics studies - for instance, multiorgan animal models of disease, drug toxicities, environmental exposure, and aging as well as large-scale clinical investigations involving the use of biospecimens from existing tissue repositories.

Effects of sous vide cooking combined with ultrasound pretreatment on physicochemical properties and microbial communities of Russian sturgeon meat (Acipenser gueldenstaedti)

BACKGROUND

The production of Russian sturgeon is expanding rapidly in China but it is necessary to adopt measures to extend the shelf life of sturgeon meat. Previous studies found that sous vide cooking (SVC) at 60 °C increased the protein and lipid oxidation. The addition of antioxidant substances reduced the acceptance of the product. The effect of combination SVC and ultrasound pretreatment was therefore investigated.

RESULTS

Results showed that SVC at 50 °C combined with ultrasound effectively restrained the growth of total viable counts (TVC) in samples. Meanwhile, the main dominant genera changed from Pseudomonas to Carnobacterium and the number of microbial species decreased. The odor profile of Russian sturgeon meat was more stable and the lipoxygenase (LOX) activity decreased more rapidly after treating with SVC and ultrasound. Importantly, more stable protein aggregates were formed in samples treated by SVC 50 °C together with ultrasound pretreatment, so the protein and lipid oxidation were slowed during storage. Higher springiness values were obtained and the color of sturgeon meat was lighter under these conditions.

CONCLUSION

The combination of SVC 50 °C and ultrasound pretreatment effectively inhibited the microbial growth of Russian sturgeon meat at lower oxidation levels. These findings theoretically support the preservation and development of sturgeon meat, and the application of SVC technology. © 2022 Society of Chemical Industry.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.

Application of compressive sensing in SFAI measurement for faster sound speed assessment

Quick quality assessment of fluid (liquid and gas) is a key requirement for many industries. Acoustic parameters like sound speed in fluid or sound attenuation in fluid can serve as a crucial marker for assessing fluid quality as any deviation of those parameters points to adulteration or degradation of the fluid. Swept Frequency Acoustic Interferometry (SFAI) is a well-known noninvasive technique for taking measurements of fluid's acoustic parameters (e.g. sound speed in fluid, sound attenuation in fluid, etc.) from outside the container walls. In this work, we focused on assessing sound speed in liquid through SFAI while applying compressive sensing technique to make very fast scans which are otherwise not possible through standard SFAI measurements. We report the possibility of 25 times faster scanning speed to measure sound speed in fluid when compared to standard SFAI based frequency scans. In addition, the proposed technique significantly reduces the volume of data that needs to be processed twenty-four hours a day basis.

Insights into Ultrasonication Treatment on the Characteristics of Cereal Proteins: Functionality, Conformational and Physicochemical Characteristics

BACKGROUND

It would be impossible to imagine a country where cereals and their byproducts were not at the peak of foodstuff systems as a source of food, fertilizer, or for fiber and fuel production. Moreover, the production of cereal proteins (CPs) has recently attracted the scientific community's interest due to the increasing demands for physical wellbeing and animal health. However, the nutritional and technological enhancements of CPs are needed to ameliorate their functional and structural properties. Ultrasonic technology is an emerging nonthermal method to change the functionality and conformational characteristics of CPs. Scope and approach: This article briefly discusses the effects of ultrasonication on the characteristics of CPs. The effects of ultrasonication on the solubility, emulsibility, foamability, surface-hydrophobicity, particle-size, conformational-structure, microstructural, enzymatic-hydrolysis, and digestive properties are summarized.

CONCLUSIONS

The results demonstrate that ultrasonication could be used to enhance the characteristics of CPs. Proper ultrasonic treatment could improve functionalities such as solubility, emulsibility, and foamability, and is a good method for altering protein structures (including surface hydrophobicity, sulfhydryl and disulfide bonds, particle size, secondary and tertiary structures, and microstructure). In addition, ultrasonic treatment could effectively promote the enzymolytic efficiency of CPs. Furthermore, the in vitro digestibility was enhanced after suitable sonication treatment. Therefore, ultrasonication technology is a useful method to modify cereal protein functionality and structure for the food industry.

Tuning water chemistry for the recovery of greener products: pragmatic and sustainable approaches

The environmental impact and denaturing propensity of organic solvents in the extraction of plant bioactives pose great challenges in extraction systems. As a result, proactive consideration of procedures and evidence for tuning water properties for better recovery and positive influence on the green synthesis of products become pivotal. The conventional maceration approach takes a longer duration (1-72 h) for product recovery while percolation, distillation, and Soxhlet extractions take about 1 to 6 h. An intensified modern hydro-extraction process was identified for tuning water properties with an appreciable yield similar to organic solvents within 10-15 min. The percentage yield of tuned hydro-solvents achieved close to 90% recovery of active metabolites. The additional advantage of using tuned water over organic solvents is in the preservation of the bio-activities and forestalling the possibility of contamination of the bio-matrices during extractions with an organic solvent. This advantage is based on the fast extraction rate and selectivity of the tuned solvent when compared to the traditional approach. This review uniquely approaches the study of biometabolite recovery through insights from the chemistry of water under different extraction techniques for the very first time. Current challenges and prospects from the study are further presented.

Capsicum Waste as a Sustainable Source of Capsaicinoids for Metabolic Diseases

Capsaicinoids are pungent alkaloid compounds enriched with antioxidants, anti-microbial, anti-inflammatory, analgesics, anti-carcinogenic, anti-obesity and anti-diabetic properties. These compounds are primarily synthesised in the placenta of the fruit and then transported to other vegetative parts. Different varieties of capsicum and chillies contain different capsaicinoid concentrations. As capsicums and chillies are grown extensively throughout the world, their agricultural and horticultural production leads to significant amount of waste generation, in the form of fruits and plant biomass. Fruit wastes (placenta, seeds and unused fruits) and plant biowaste (stems and leaves) can serve as sources of capsaicinoids which can provide opportunities to extract these compounds for development of nutraceutical products using conventional or advanced extraction techniques. Capsaicin and dihydrocapsaicin are two most abundantly found pungent compounds. Considering the health benefits of capsaicinoids, these compounds can help in reducing metabolic disease complications. The development of an advanced encapsulation therapy of safe and clinically effective oral capsaicinoid/capsaicin formulation seem to require evaluation of strategies to address challenges related to the dosage, limited half-life and bioavailability, adverse effects and pungency, and the impacts of other ligands antagonising the major capsaicinoid receptor.

Designing liquefaction and saccharification processes of highly concentrated starch slurry: Challenges and recent advances

Starch-based sugars are an important group of starch derivatives used in food, medicine, chemistry, and other fields. The production of starch sugars involves starch liquefaction and saccharification processes. The production cost of starch sugars can be reduced by increasing the initial concentration of starch slurry. However, the usage of the highly concentrated starch slurry is characterized by challenges such as low reaction efficiency and poor product performance during the liquefaction and saccharification processes. In this study, we endeavored to provide a reference guide for improving high-concentration starch sugar production. Thus, we reviewed the effects of substrate concentration on the starch sugar production process and summarized several potential strategies. These regulation strategies, such as physical field pretreatment, complex enzyme-assisted, and temperature control, can significantly increase the starch concentration and mitigate the challenges of using highly concentrated starch slurry. We believe that highly concentrated starch sugar production will achieve a qualitative leap in the future. This review provides theoretical guidance and highlights the importance of high concentration in starch-based sugar production. Further studies are needed to explore the fine structure and enzyme attack mode during the liquefaction and saccharification processes to regulate the production of more targeted products.

The Need for Machines for the Nondestructive Quality Assessment of Potatoes with the Use of Artificial Intelligence Methods and Imaging Techniques

This article describes chemical and physical parameters, including their role in the storage, trade, and processing of potatoes, as well as their nutritional properties and health benefits resulting from their consumption. An analysis of the share of losses occurring during the production process is presented. The methods and applications used in recent years to estimate the physical and chemical parameters of potatoes during their storage and processing, which determine the quality of potatoes, are presented. The potential of the technologies used to classify the quality of potatoes, mechanical and ultrasonic, and image processing and analysis using vision systems, as well as their use in applications with artificial intelligence, are discussed.

Thermosonication Applied to Kiwi Peel: Impact on Nutritional and Microbiological Indicators

The peels of many fruits are rich sources of nutrients, although they are not commonly consumed. If they are properly decontaminated, they can be used as healthy food ingredients reducing food waste. The objective was to apply thermosonication processes to kiwi peel and evaluate the impact on Listeria innocua survival (a non-pathogenic surrogate of L. monocytogenes) and key nutrients and quality indicators: proteins, fibers, minerals (Ca, K, Mg, Na, and P), chlorophylls, and phenolic contents. Kiwi peels were artificially inoculated with L. innocua and thermal and thermosonication treatments were performed at 55 °C and 60 °C for 30 and 15 min maximum, respectively. Bacteria were enumerated through treatment time, and quality indicators were assessed before and at the end of treatments. A Weibull model with a decimal reduction time (D-value) was successfully used in L. innocua survival data fits. Results showed that coupling temperature to ultrasound had a synergistic effect on bacteria inactivation with significant decreases in D-values. Thermosonication at 60 °C was the most effective in terms of protein, fiber, chlorophylls, and phenolics retention. Minerals were not significantly affected by all treatments. Applying thermosonication to kiwi peel was more effective for decontamination than thermal treatments at the same temperature while allowing the retention of healthy compounds.

Principles, Application, and Gaps of High-Intensity Ultrasound and High-Pressure Processing to Improve Meat Texture

In this study, we evaluate the most recently applied emerging non-thermal technologies (NTT) to improve meat tenderization, high-intensity ultrasound (HIUS), and high-pressure processing (HPP), aiming to understand if individual effects are beneficial and how extrinsic and intrinsic factors influence meat toughness. We performed a systematic literature search and meta-analysis in four databases (Web of Science, Scopus, Embase, and PubMed). Among the recovered articles (n = 192), 59 studies were included. We found better sonication time in the range of 2-20 min. Muscle composition significantly influences HIUS effects, being type IIb fiber muscles more difficult to tenderize (p < 0.05). HPP effects are beneficial to tenderization at 200-250 MPa and 15-20 min, being lower and higher conditions considered inconclusive, tending to tenderization. Despite these results, undesirable physicochemical, microstructural, and sensory alterations are still unknown or represent barriers against applying NTT at the industrial level. Optimization studies and more robust analyses are suggested to enable its future implementation. Moreover, combining NTT with plant enzymes demonstrates an interesting alternative to improve the tenderization effect caused by NTT. Therefore, HIUS and HPP are promising technologies for tenderization and should be optimized considering time, intensity, pressure, muscle composition, undesirable changes, and combination with other methods.

Dynamic alterations in protein, sensory, chemical, and oxidative properties occurring in meat during thermal and non-thermal processing techniques: A comprehensive review

Meat processing represents an inevitable part of meat and meat products preparation for human consumption. Both thermal and non-thermal processing techniques, both commercial and domestic, are able to induce chemical and muscle's proteins modification which can have implication on oxidative and sensory meat characteristics. Consumers' necessity for minimally processed foods has paved a successful way to unprecedented exploration into various novel non-thermal food processing techniques. Processing of meat can have serious implications on its nutritional profile and digestibility of meat proteins in the digestive system. A plethora of food processing techniques can potentially induce alterations in the protein structure, palatability, bioavailability and digestibility via various phenomena predominantly denaturation and Maillard reaction. Apart from these, sensory attributes such as color, crispness, hardness, and total acceptance get adversely affected during various thermal treatments in meat. A major incentive in the adoption of non-thermal food processing is its energy efficiency. Considering this, several non-thermal processing techniques have been developed for evading the effects of conventional thermal treatments on food materials with respect to Maillard reactions, color changes, and off-flavor development. Few significant non-thermal processing techniques, such as microwave heating, comminution, and enzyme addition can positively affect protein digestibility as well as enhance the value of the final product. Furthermore, ultrasound, irradiation, high-pressure processing, and pulsed electric fields are other pivotal non-thermal food processing technologies in meat and meat-related products. The present review examines how different thermal and non-thermal processing techniques, such as sous-vide, microwave, stewing, roasting, boiling, frying, grilling, and steam cooking, affect meat proteins, chemical composition, oxidation, and sensory profile.

Sonoprocessing: mechanisms and recent applications of power ultrasound in food

There is a growing interest in using green technologies in the food industry. As a green processing technique, ultrasound has a great potential to be applied in many food applications. In this review, the basic mechanism of ultrasound processing technology has been discussed. Then, ultrasound technology was reviewed from the application of assisted food processing methods, such as assisted gelation, assisted freezing and thawing, assisted crystallization, and other assisted applications. Moreover, ultrasound was reviewed from the aspect of structure and property modification technology, such as modification of polysaccharides and fats. Furthermore, ultrasound was reviewed to facilitate beneficial food reactions, such as glycosylation, enzymatic cross-linking, protein hydrolyzation, fermentation, and marination. After that, ultrasound applications in the food safety sector were reviewed from the aspect of the inactivation of microbes, degradation of pesticides, and toxins, as well inactivation of some enzymes. Finally, the applications of ultrasound technology in food waste disposal and environmental protection were reviewed. Thus, some sonoprocessing technologies can be recommended for the use in the food industry on a large scale. However, there is still a need for funding research and development projects to develop more efficient ultrasound devices.

A chemometric approach to evaluate the effects of probe-type ultrasonication on the enzyme inactivation and quality attributes of fresh amla juice

The enzymatic browning induced in amla juice due to the high activity of polyphenol oxidase (PPO) and peroxidase (POD) is one of the critical issues faced by the industry. The present study assessed the suitability of non-thermal, high-intensity ultrasound (US) on the inactivation of PPO and POD in fresh Indian Gooseberry juice. Ultrasonic waves, using a 6 mm titanium alloy probe were irradiated in the juice at a maximum power of 455 W and frequency of 20 kHz. The subsequent effects on biochemical attributes were studied using response surface methodology. Inactivation rates of 90.72 % and 73.18 %, respectively, for PPO and POD enzymes, were observed at the highest US intensity and exposure time. Numerical optimisation using the three-factor, three-level Box-Behnken design suggested that an optimum process at 70 % (energy density: 1610 Wcm^-2) pulsed at 5 s on and 5 s off for 7 min 30 s resulted in PPO and POD inactivation of the order of 76.42 % and 64.57 % respectively. At these experimental conditions, the optimized levels of biochemical attributes i.e., ascorbic acid (738.50 mg/100 mL), total phenols (17.10 mg/mL), DPPH antioxidant activity (58.47 %), tannins (7.11 µg/mL), colour change (ΔE = 9.04) and flavonoids (6.14 mg/mL) were achieved. The overall statistical models were significant for all the responses except for reducing sugars. Furthermore, the approximation equations for individual responses indicated that the goodness of fit was adequate (R² > 0.90). The results suggested that ultrasound is a suitable processing technique for amla juice stabilisation compared to thermal treatments that result in the loss of quality.

Food-Package-Processing relationships in emerging technologies: Ultrasound effects on polyamide multilayer packaging in contact with different food simulants

In this study, the effect of ultrasound processing on the properties of two packages widely used in food products was evaluated: polyamide (PA) and polyethylene (PE) multilayer packaging. Packages composed of PE/PA/PE (Film A) and PE/PA/PE/PA/PE (Film B) were filled with aqueous and fatty food simulants and treated in an ultrasound water bath (frequency 25 kHz, volumetric power of 9.74 W/L, temperature of 25 °C, and time of 30 and 60 min). Materials were evaluated in term of structure and performance properties. Ultrasound did not or induced small changes in chemical groups, crystallinity, melting temperature, and tensile strength of the films. Film A showed a reduction in heat sealing tensile strength of 25% in the machine direction and 22% in the transverse direction. Film B showed a 20% increase of water vapor transmission rate after ultrasound processing. Although ultrasound had little impact on the properties of the evaluated materials, these modifications do not compromise the use of these packages for applications in ultrasound-processed foods. Therefore, the results indicate that ultrasound can be used as a food processing technology in multilayer PA and PE packaging.

A new decontamination method for Bacillus subtilisin pasteurized milk: Thermosonication treatment

Thermosonication (TS) is a novel and viable technique employed to replace conventional thermal processing. TS treatment combined with pasteurization was used to kill the residual heat-resistant Bacillus in pasteurized milk and extend the shelf life of pasteurized milk and compared with High Temperture Shoort Time (HTST) pasteurization to study its decontamination effect on Bacillus subtilis and the quality of treated milk. The results showed that after 40 kHz, 240 W, 25 min ultrasonic treatment and 50 °C heating decontamination treatment, the number of B. subtilis in the medium and milk medium decreased by 4.17 log CFU/mL and 4.09 log CFU/mL respectively. The results of cell membrane permeability showed that the leakage of DNA and protein in the HTST-TS group increased by 52.3 % and 34 %, respectively, when compared to that in the HTST group. In addition, transmission electron microscopy (TEM) analysis showed that the bacterial cell membrane of the HTST-TS group swelled up, the cell wall was ruptured, and the cell content was accumulated in the cells. The results showed that HTST-TS treatment significantly inhibited the activities of ATPase (47 %), succinate dehydrogenase (SDH) (68.6 %), and malate dehydrogenase (MDH) (54.4 %). The physical and chemical sensory evaluation of milk treated with HTST-TS showed that HTST-TS treatment could improve the L* value (2.24 %), zeta potential (64.19 %), and colloidal particle size (14.49 %) of milk but had no significant effect on oral sensitivity. In conclusion, this study provides new insights, which may be helpful in implementing this new combined decontamination method in the dairy industry to improve the quality of pasteurized milk and extend the its shelf life.