Size matters more than shape: Ingestion of primary and secondary microplastics by small predators

Assessing meso-, micro-, and nanoplastic pollution in Los Angeles County estuaries

Estuaries can behave as plastic pollution hotspots, although the dynamics of accumulation in these unique habitats are not understood. We quantified the current levels of meso-, micro-, and nanoplastic pollution in four Los Angeles County estuaries for the first time, as a function of distance from the water outlet and local population density. Fourier-transform infrared spectroscopy (FTIR) and microscope imaging revealed the presence of six types of plastic; polyethylene or polypropylene dominated the meso- and microplastic, and nanoplastics were identified as mainly polyolefin fibers. The distribution was heterogeneous throughout, although the sand between the river mouth and ocean generally contained more plastic than inland control samples. Population density did not appear to affect the abundance of plastic estuarine pollution. Other factors, such as waste treatment effluent, recreation, and river geography, may contribute to plastic deposition. A positive correlation between meso- and microplastic abundance provides insight into such mechanisms for accumulation.

Microplastic concentration, characterization, and size distribution in the Delaware Bay estuary

Microplastic (MP) pollution has been widely reported across water matrices including in estuaries, which are important for the understanding of oceanic MPs. Estuaries can greatly alter the fate, transport, size distribution, and abundance of plastic pollution. The aim of this study was to quantify and characterize MP pollution in the Delaware Bay estuary USA, including the size distribution. Samples (N = 31) were collected from the mouth of the Delaware River to the coastal ocean including multiple frontal zones across two sampling campaigns (2019 and 2022). MP were extracted from the collected particles using wet peroxide oxidation and density separation with saturated sodium chloride. Particles collected on 500 μm mesh sieves were analyzed via Fourier transform infrared (FTIR) spectroscopy. Across all samples, 324 of the 1015 particles analyzed were MP, and 11 macroplastics were observed. MP concentrations ranged from below detection to 4.12 MP/m3 (mean 0.34 ± 0.80 MP/m3). No significant differences were observed between sampling sites; nonetheless, the two highest MP concentrations were observed when sampling along frontal zones with visible debris including macroplastics. Polyethylene (53%) and polypropylene (43%) were the most abundant polymers observed. The majority of the non-plastic particles were classified as particulate natural organic matter (82% of non-plastics). Particles from samples collected during 2022 (N = 864) also had color, morphology, and two size dimensions recorded. MP particle size was significantly associated with sampling site, with the coastal ocean sampling site generally having the smallest MPs. A correlation between total post-extraction particles and total plastic particles was observed. Aspect ratios for the plastics ranged from one to 40.7, with larger ratios for fibers, with a mean (±standard deviation) of 3.39 ± 4.72 (unitless). These aspect ratios can be used to select shape factors used to estimate the total volume of MP in the studied size range. Overall, these results can help inform fate, transport, and risk assessments related to estuarine plastic pollution.

Occurrence and abundance of microplastics in surface water of Songkhla Lagoon

Background

Microplastic (MP) pollution is now a global critical issue and has been the subject of considerable worry for multiple various types of habitats, notably in lagoons which are coastal areas connected to the ocean. MPs are of concern, particularly because floating MP in surface water can be ingested by a number of marine organisms. There are several lagoons along Southeast Asia's coastline, but Songkhla Lagoon is Thailand's only exit with a rich biodiversity. To date, there has been little research undertaken on MP in this lagoon, so there is a pressing need to learn more about the presence of MP in the lagoon's water.

Methods

We investigate MPs in the surface water of Songkhla Lagoon, Thailand. Sampling took place at ten stations in the lagoon during the wet season in December 2022 and the dry season in February 2023. Samples were digested with hydrogen peroxide to remove organic matter followed by density separation using saturated sodium chloride. MPs were visually examined under a stereo microscope to describe and determine the shape, size, and color. Polymer type was identified using a micro Fourier transform infrared (FTIR) spectrometer. Moreover, the in-situ of water quality of the surface water was measured using a multi-parameter probe. A Mann-Whitney U test was performed to investigate the variations in MP levels and water quality parameters between the wet and dry seasons. Correlation analysis (Spearman rho) was used to determine the significance of correlations between MP and water quality (p < 0.05).

Results

MPs were detected at all ten of the sites sampled. The most abundant MPs were small size class (<500 µm, primarily consisting of fibers). Five types of polymers were seen in surface water, including polyethylene terephthalate, rayon, polypropylene, polyester, and poly (ethylene:propylene). Rayon and polyester were the dominant polymers. Additionally, the most dominant color of MPs in the wet and dry season was black and blue, respectively. The mean contents of MPs in the wet and dry season were 0.43 ± 0.18 and 0.34 ± 0.08 items/L, respectively. The Mann-Whitney U test suggested a significant difference between water quality in the wet and dry seasons (p < 0.05). Correlation analysis (Spearman rho) indicated a negative significant difference relationship between the MPs and the values of total dissolved solid (TDS) in the wet season (r = -0.821, p = <0.05), revealing that the large amounts of MPs may possibly be dispersed within surface water bodies with low TDS concentrations. Based on the overall findings, MP pollution in the surface water of the lagoon is not found to be influenced by the seasonal context. Rivers flowing into the lagoon, especially the U-Taphao River, may be a principal pathway contributing to increased MP pollution loading in the lagoon. The results can be used as baseline data to undertake further research work relevant to sources, fates, distribution, and impacts of MPs in other coastal lagoons.

Occurrence of microplastics and metals in European seabass produced in different aquaculture systems: Implications for human exposure, risk, and food safety

Microplastics (MPs) are emerging contaminants of increasing concern as they may cause adverse effects and carry other contaminants, which may potentially compromise human health. Despite occurring in aquatic ecosystems worldwide, the knowledge about MP presence in different aquaculture systems and their potential impact on seafood products is still limited. This study aimed to determine the levels of MPs in water, feed, and European seabass (Dicentrarchus labrax) from three relevant aquaculture systems and estimate human exposure to MPs and metals through seabass consumption. The recirculating aquaculture system (RAS) had the highest MP occurrence in water and feed. MP levels in seabass followed the aquaculture system's levels in water and feed, with RAS-farmed fish presenting the highest MP load, both in the fish gastrointestinal tract (GIT) and muscle, followed by pond-, and cage-farmed fish. MPs' characteristics across aquaculture systems and fish samples remained consistent, with the predominant recovered particles falling within the MP size range. The particles were visually characterized and chemically identified by micro-Fourier Transform Infrared Spectroscopy (μFTIR). Most of these particles were fibres composed of man-made cellulose and PET. MP levels in GIT were significantly higher than in muscle for pond- and RAS-farmed fish, MPs' bioconcentration factors >1 indicated bioconcentration in farmed seabass. Metal concentrations in fish muscle were below permissible limits, posing low intake risks for consumers according to the available health-based guidance values and estimated dietary scenarios.

Toxicity effects and mechanism of micro/nanoplastics and loaded conventional pollutants on zooplankton: An overview

Micro/nanoplastics in aquatic environments is a noteworthy environmental problem. Zooplankton, an important biological group in aquatic ecosystems, readily absorb micro/nanoplastics and produce a range of toxic endpoints due to their small size. This review summarises relevant studies on the effects of micro/nanoplastics on zooplankton, including combined effects with conventional pollutants. Frequently reported adverse effects include acute/chronic lethal effects, oxidative stress, gene expression, energetic homeostasis, and growth and reproduction. Obstruction by plastic entanglement and blockage is the physical mechanism. Genotoxicity and cytotoxicity are molecular mechanisms. Properties of micro/nanoplastics, octanol/water partition coefficients of conventional pollutants, species and intestinal environments are important factors influencing single and combined toxicity. Selecting a wider range of micro/nanoplastics, focusing on the aging process and conducting field studies, adopting diversified zooplankton models, and further advancing the study of mechanisms are the outstanding prospects for deeper understanding of impacts of micro/nanoplastics on aquatic ecosystem.

Abundance, characterization, and health risk evaluation of microplastics in borehole water in Birnin Kebbi, Nigeria

Microplastic pollution has become a global menace, and water, being a major "sink" for pollutants, represents a significant source of human exposure. This study aimed to assess the safety of borehole water in Birnin Kebbi, Nigeria, specifically concerning microplastic pollution. Water samples were collected from boreholes in selected areas, including Bayan Kara, Malali, Rafin Atiku, Aliero Quarters, GwadanGaji, FUBK Takeoff Site, Kalgo Market, and Tarasa. Microplastics were extracted from the water samples through filtration using glass fiber filter papers, and were subsequently subjected to spectroscopy and microscopy to determine concentrations, shapes, and polymer types. Health risks associated with the microplastics were also calculated. The results revealed that the samples from Tarasa exhibited the highest concentrations of microplastics (96.967 particles/L), followed by Bayan Kara (92.70 particles/L), Rafin Atiku (92.33 particles/L), GwadanGwaji (92.30 particles/L), FUBK Takeoff Site (91.07 particles/L), Aliero Quarters (90.43 particles/L), Kalgo Market (88.00 particles/L), and Malali (86.40 particles/L). The most dominant shape was fibers (73 %), followed by fragments (16 %), foams (6 %), and filaments (5 %). Polyethylene and polyamide, in that order, were the most dominant polymers, while polystyrene was the least common. The majority of risk scores were classified as III. It can be inferred from the results that microplastic pollution in borehole water poses a health hazard in the city. Consumers of borehole water in the studied areas are advised to treat the water before consumption to mitigate potential health risks.

Impact of nano- and micro-sized polystyrene beads on larval survival and growth of the Pacific oyster Crassostrea gigas

This study successionally monitored how nano- and micro-sized polystyrene beads (MNPs) influence larval mortality, growth, and attachment behavior of the Pacific oyster Crassostrea gigas related to MNP diameter and concentration. D-shaped larvae were sequentially exposed to three-diameter MNPs (0.55, 3.00, 6.00 µm) at five concentrations (0, 0.1, 1.0, 10, 20 μg/mL), and their mortality, growth stages and attachment were observed daily until they die. In addition, MNP intake and accumulation in larvae at each growth stage were determined using fluorescent beads. Deterioration in larval growth and survival was observed under all the exposure conditions, while significant negative effects on the growth parameters were defined with smaller MNPs at lower concentrations. Fluorescent signals were detected in larval digestive tracts at all except D-shaped larval stage, and on the mantle and foot in pediveligers. Therefore, MNP intake adversely affects larval physiological conditions by the synchronal effects of MNP size and concentration. Our findings highlight the implications of MNP characteristics on Pacific oyster larvae, emphasizing the interplay between size, concentration, and physiological responses, crucial for mitigating nanoparticle pollution in marine ecosystems.

Ingestion and adherence of microplastics by estuarine mysid shrimp

Microplastics have been reported to be present in zooplankton, yet questions persist regarding their fate and dynamics within biota. We selected the commercial mysid shrimp, Mesopodopsis orientalis, as the focal zooplankton for this study due to their crucial role in our study area, the Inner Gulf of Thailand in January 2022. We investigated the presence of microplastics in mysid bodies and fecal pellets, examining both attached microplastics on external body parts and those ingested. In addition, we conducted microplastic feeding experiments, exposing mysids to various treatments of microplastics. The results of the field investigation indicate that mysids exhibited an average of 0.12 ± 0.03 microplastic items/mysid from whole-body samples. The shape, type, and color of microplastics found in mysids were similar to those present in seawater, with blue PET microfibers being the most prevalent. Our observations on live mysids revealed that microplastics were acquired through ingestion and adherence to appendages and exoskeletons. Microplastics were observed in mysid's fecal pellets at 0.09 ± 0.03 items/mysid, while microplastics adhering to the mysid's body and appendages were observed at 0.10 ± 0.04 items/mysid. The sizes of microplastics extracted from preserved mysids ranged from 58 μm to 4669 μm, with median of 507 μm. The laboratory experiments revealed that the presence of microalgae enhanced microplastic ingestion in mysids; microplastics incubated with a cyanobacterium, Oscillatoria sp., and diatom Navicula sp. significantly increased the number of microplastic particles ingested by mysids. This study showed that microplastics can be more ingested in mysids, especially when food items are present. Microplastic fate in these animals may involve expulsion into the environment or adherence, potentially facilitating their transfer up the marine food web.

Spatial and temporal trends of microplastic contamination in surface sediment of Benoa Bay: An urban estuary in Bali-Indonesia

This study aims to explore microplastic contamination in the sediments of Benoa Bay. Eight locations were sampled, with four duplications denoting the rainy and dry seasons. Based on observations, the microplastic concentration varied from 9.51 to 90.60 particles/kg with an average of 31.08 ± 21.53 particles/kg. The area near the landfill had the highest abundance, while the inlet and center of Benoa Bay and the Sama River had the lowest concentration. The fragments (52.2 %) and large microplastic sizes (64.7 %) were the most documented particles. We also identified 17 polymers, which dominated (37.5 %) by polyethylene, polypropylene, and polystyrene. There were no appreciable variations in abundance between seasons, although there were substantial variations in shape and size. Comprehensive investigation, adequate policies, continuous monitoring, and reducing waste from land- and sea-based sources that engage various stakeholders must be implemented urgently to prevent the release of microplastic into the aquatic ecosystem.

Are vehicle tires major contributors to microplastic emissions into the China seas? A simple model perspective

Microplastics pose a substantial threat to our environment. Given China's large population and rapid economic growth, it is urgent to estimate the annual emissions of microplastics into its marine environment. The microplastics show a significant variation in their source emissions as well as in their physical and chemical properties, leading to differences in their transport and fate in aquatic environments. To account for these variations, we developed a process-oriented model that considers microplastics from different sources and the inter-provincial variation in their retention rate to assess annual microplastic emissions into the China seas. On a national scale, of the microplastics emitted, 36.05 % are from household laundry activities, 27.26 % are from the wear and tear of vehicle tires, and 24.04 % are from the abrasion of plastic household items. After emission, 60.21 % are removed by wastewater treatment plants. The overall proportion of microplastics that end up in the marine environment highly depends on the specific riverine retention rate of microplastics from vehicle tires. Including the high settling rate of these microplastics, this proportion drops from 9.96 % to 3.29 %, rendering vehicle tires a minor contributor to microplastic emissions into the China seas compared to other sources. Moreover, when using the density-dependent approach and considering the east/west dimension of each province, the microplastic emissions from vehicle tires into the China seas decrease from 71 % to 5.27 %. This underscores the urgent need for global and regional models to account for the detailed riverine transport process of microplastics from vehicle tires in order to enhance the accuracy of their emission estimates into coastal waters.

Effects of ocean acidification and polystyrene microplastics on the oysters Crassostrea gigas: An integrated biomarker and metabolomic approach

The adverse impacts of microplastics (MPs) or ocean acidification (OA) on mollusks have been widely reported, however, little is known about their combined effects on mollusks. The oysters Crassostrea gigas were exposed to two sizes of polystyrene MPs with 1 × 104 particles/L (small polystyrene MPs (SPS-MPs): 6 μm, large polystyrene MPs (LPS-MPs): 50-60 μm) at two pH levels (7.7 and 8.1) for 14 days. The antagonistic effects between MPs and OA on oysters were mainly observed. Single SPS-MPs exposure can induce CAT enzyme activity and LPO level in gills, while LPS-MPs exposure alone can increase PGK and PEPCK gene expression in digestive glands. Ocean acidification can increase clearance rate and inhibit antioxidant enzyme activity, whereas combined exposure of OA and SPS-MPs can affect the metabolomic profile of digestive glands. This study emphasized that the potential toxic effects of MPs under the scene of climate change should be concerned.

Impact of anthropogenic activities on the abundance of microplastics in copepods sampled from the southeast coast of India

In recent year, the use of plastics has become inevitable due to its unique properties that allow for the production of durable and non-durable goods. Post use, plastics enter the waste stream and now can be found in all compartments of the biosphere as microplastics (MPs). This study presents the abundance of MPs in surface water and within copepods in the southwestern Bay of Bengal during dry (June 2022) and wet season (November 2022). The MPs in the surface water were found in all three regions [Chennai, Tuticorin and Nagapattinam (four locations in each region)] and maximum in wet season (53 particles/m3). Moreover, during dry season the mean ingestion of MPs by copepods in Chennai (0.103 ± 0.04 particles/individual), Tuticorin (0.11 ± 0.07 particles/individual) and Nagapattinam (0.036 ± 0.01 particles/individual) is high compared to the wet season. The maximum level of MPs found in both surface water and ingestion by copepods in Tuticorin and Chennai is subjective to the high maritime activities than Nagapattinam region. Whatever, the anthropogenic activities in the study region increase the bioavailability of MPs pollutant in the copepods and transported to higher trophic levels, endangering marine life and human health. Hence, further studies are needed to determine their potential impact on marine food chain in this alarming situation.

Microplastics reach the brain and interfere with honey bee cognition

Scientific research on the impact of microplastics (MPs) in terrestrial systems is still emerging, but it has confirmed adverse health effects in organisms exposed to plastics. Although recent studies have shown the toxicological effects of individual MPs polymers on honey bees, the effects of different polymer combinations on cognitive and behavioural performance remain unknown. To fill this knowledge gap, we investigated the effects of oral exposure to spherical MPs on cognitive performance and brain accumulation in the honey bee Apis mellifera. We evaluated the acute toxicity, after a two-day exposure, of polystyrene (PS - 4.8-5.8 μm) and plexiglass (Poly(methyl methacrylate), or PMMA - 1-40 μm) MPs, and a combination of the two (MIX), at two environmentally relevant and one higher concentration (0.5, 5 and 50 mg L-1) and analysed their effects on sucrose responsiveness and appetitive olfactory learning and memory. We also used fluorescent thermoset amino formaldehyde MPs (1-5 μm) to explore whether microspheres of this diameter could penetrate the insect blood-brain barrier (BBB), using Two-Photon Fluorescence Microscopy (TPFM) in combination with an optimized version of the DISCO clearing technique. The results showed that PS reduced sucrose responsiveness, while PMMA had no significant effect; however, the combination had a marked negative effect on sucrose responsiveness. PMMA, PS, and MIX impaired bee learning and memory in bees, with PS showing the most severe effects. 3D brain imaging analysis using TFPM showed that 1-5 μm MPs penetrated and accumulated in the brain after only three days of oral exposure. These results raise concerns about the potential mechanical, cellular, and biochemical damage that MPs may cause to the central nervous system.

Responses of submerged macrophytes to different particle size microplastics and tetracycline co-pollutants at the community and population level

Microplastics (MPs) and antibiotics are ubiquitous in aquatic ecosystems, and their accumulation and combined effects are considered emerging threats that may affect biodiversity and ecosystem function. The particle size of microplastics plays an important role in their combined effects with antibiotics. Submerged macrophytes are crucial in maintaining the health and stability of freshwater ecosystems. However, little is known about the combined effects of different particle size of MPs and antibiotics on freshwater plants, particularly their effects on submerged macrophyte communities. Thus, there is an urgent need to study their effects on the macrophyte communities to provide essential information for freshwater ecosystem management. In the present study, a mesocosm experiment was conducted to explore the effects of three particle sizes (5 µm, 50 µm, and 500 µm) of polystyrene-microplastics (PSMPs) (75 mg/L), tetracycline (TC) (50 mg/L), and their co-pollutants on interactions between Hydrilla verticillata and Elodea nuttallii. Our results showed that the effects of MPs are size-dependent on macrophytes at the community level rather than at the population level, and that small and medium sized MPs can promote the growth of the two test macrophytes at the community level. In addition, macrophytes at the community level have a stronger resistance to pollutant stress than those at the population level. Combined exposure to MPs and TC co-pollutants induces species-specific responses and antagonistic toxic effects on the physio-biochemical traits of submerged macrophytes. Our study provides evidence that MPs and co-pollutants not only affect the morphology and physiology at the population level but also the interactions between macrophytes. Thus, there are promising indications on the potential consequences of MPs and co-pollutants on macrophyte community structure, which suggests that future studies should focus on the effects of microplastics and their co-pollutants on aquatic macrophytes at the community level rather than only at the population level. This will improve our understanding of the profound effects of co-pollutants in aquatic environments on the structure and behavior of aquatic communities and ecosystems.

Effect of polypropylene microplastics on virus resistance in spotted sea bass (Lateolabrax maculatus)

Microplastics (MPs) pollution is a hot issue of global concern. Polypropylene microplastics (PP-MPs) age quickly in the marine environment and break down into smaller particles because of their relatively low temperature resistance, poor ultraviolet resistance, and poor antioxidant capacity, making them one of the major pollutants in the ocean. We assessed whether long-term exposure to micron-sized PP-MPs influences fish susceptibility to viral diseases. We found that exposure to PP-MPs (1-6 μm and 10-30 μm) at concentrations of 500 and 5000 μg/L resulted in uptake into spleen and kidney tissues of Lateolabrax maculatus. Increased activation of melanomacrophage centers was visible in histopathological sections of spleen from fish exposed to PP-MPs, and greater deterioration was observed in the spleen of fish infected by largemouth bass ulcerative syndrome virus after PP-MPs exposure. Additionally, exposure to PP-MPs led to significant cytotoxicity and a negative impact on the antiviral ability of cells. PP-MPs exposure had inhibitory or toxic effects on the immune system in spotted sea bass, which accelerated virus replication in vivo and decreased the expression of the innate immune- and acquired immune related genes in spleen and kidney tissues, thus increasing fish susceptibility to viral diseases. These results indicate that the long-term presence of micron-sized PP-MPs might impact fish resistance to disease, thereby posing a far-reaching problem for marine organisms.

Humic substance/metal-oxide multifunctional nanoparticles as advanced antibacterial-antimycotic agents and photocatalysts for the degradation of PLA microplastics under UVA/solar radiation

As a result of the accumulation of plastic in the environment, microplastics have become part of the food chain, boosting the resistance of fungi and bacteria which can frequently encounter human beings. Employing photocatalytic degradation is a possible route towards the removal of chemical and biological pollutants, such as plastics and microplastic wastes as well as microorganisms. Using biowaste materials to design hybrid nanoparticles with enhanced photocatalytic and antimicrobial features would uphold the principles of the circular bioeconomy. Here, two unexpensive semiconductors-namely titanium dioxide (TiO2) and zinc oxide (ZnO) - were synthetized through solvothermal synthesis and combined with humic substances deriving from agrifood biomass. The preparation led to hybrid nanoparticles exhibiting enhanced ROS-generating properties for simultaneous applications as antimicrobial agents against different bacterial and fungal strains and as photoactive catalysts to degrade polylactic acid (PLA) microplastics under UVA and solar irradiation. In comparison to bare nanoparticles, hybrid nanoparticles demonstrated higher antibacterial and antimycotic capabilities toward various pathogenic microorganisms as well as advanced photocatalytic activity in the degradation of PLA with a carbonyl index reduction in the range of 15-23%, thus confirming a noteworthy ability in microplastics photodegradation under UVA and solar irradiation.

Abundance and characterization of microplastic pollution in the wildlife reserve, Ramsar site, recreational areas, and national park in northern Jakarta and Kepulauan Seribu, Indonesia

This is the first study to evaluate the presence and distribution of microplastics in sediments in the regions with a unique degree of complexity, such as wildlife reserve areas, a Ramsar site that connects directly to Greater Jakarta's mainland, recreational islands, and a marine national park. Microplastics of varying sizes and shapes are found in all places, with an increase trend in the abundance toward areas near to the epicenter of human activity. Comparatively to other marine protected areas, the amount of microplastics discovered is comparable; however, there is an upward trend. Season influences microplastic accumulation, with the dry season causing the greater accumulation. Small-sized microplastics and microplastics resulting from large plastic fragments were predominantly discovered. The properties of microplastics in the study region are dominated by polyethylene, polypropylene, polystyrene, polyvinyl chloride, and nylon. Additional in-depth research and waste reduction from all sources that involve all stakeholders are required to reduce the amount of contaminants entering the protected area.

Alleviation of microplastic toxicity in soybean by arbuscular mycorrhizal fungi: Regulating glyoxalase system and root nodule organic acid

Microplastic accumulation in the soil-plant system can stress plants and affect products quality. Currently, studies on the effect of microplastics on plants are not consistent and underlying molecular mechanisms are yet unknown. Here for the first time, we performed a study to explore the molecular mechanism underlying the growth of soybean plants in soil contaminated with various types of microplastics (PS and HDPE) and arbuscular mycorrhizal fungi (AMF) (presence/absence). Our results revealed that a dose-dependent decline was observed in plant growth, chlorophyll content, and yield of soybean under MPs stress. The addition of MPs resulted in oxidative stress closely related to hydrogen peroxide generation (H2O2), methylglyoxal (MG) levels, lipid peroxidation (MDA), and lipoxygenase (LOX). In contrast, MPs addition enhanced mycorrhizal colonization and dependency relative to control while the rubisco and root activity declined. All the genes (GmHMA13 and GmHMA19) were downregulated in the presence of MPs except GmHMA18 in roots. AMF inoculation alleviated MPs-induced phytotoxic effects on colonization, rubisco activity, root activity and restored the growth of soybean. Under MPs exposure, AMF inoculation induced plant defense system via improved regulation of antioxidant enzymes, ascorbate, glutathione pool, and glyoxalase system. AMF upregulated the genes responsible for metals uptake in soybean under MPs stress. The antioxidant and glyoxalase systems coordinated regulation expressively inhibited the oxidative and carbonyl stress at both MPs types. Hence, AMF inoculation may be considered an effective approach for minimizing MPs toxicity and its adverse effects on growth of soybean grown on MPs-contaminated soils.

Microplastic Removal in Wastewater Treatment Plants (WWTPs) by Natural Coagulation: A Literature Review

Urban industrialization has caused a ubiquity of microplastics in the environment. A large percentage of plastic waste originated from Southeast Asian countries. Microplastics arising from the primary sources of personal care items and industrial uses and the fragmentation of larger plastics have recently garnered attention due to their ubiquity. Due to the rising level of plastic waste in the environment, the bioaccumulation and biomagnification of plastics threaten aquatic and human life. Wastewater treatment plant (WWTP) effluents are one of the major sources of these plastic fragments. WWTPs in Southeast Asia contribute largely to microplastic pollution in the marine environment, and thus, further technological improvements are required to ensure the complete and efficient removal of microplastics. Coagulation is a significant process in removing microplastics, and natural coagulants are far superior to their chemical equivalents due to their non-toxicity and cost-effectiveness. A focused literature search was conducted on journal repository platforms, mainly ScienceDirect and Elsevier, and on scientific databases such as Google Scholar using the keywords Wastewater Treatment Plant, Coagulation, Microplastics, Marine Environment and Southeast Asia. The contents and results of numerous papers and research articles were reviewed, and the relevant papers were selected. The relevant findings and research data are summarized in this paper. The paper reviews (1) natural coagulants for microplastic removal and their effectiveness in removing microplastics and (2) the potential use of natural coagulants in Southeast Asian wastewater treatment plants as the abundance of natural materials readily available in the region makes it a feasible option for microplastic removal.

Microplastics in mangroves with special reference to Asia: Occurrence, distribution, bioaccumulation and remediation options

Microplastics (MPs) are a new and lesser-known pollutant that has intrigued the interest of scientists all over the world in recent decades. MP (<5mm in size) can enter marine environments such as mangrove forests in a variety of ways, interfering with the health of the environment and organisms. Mangroves are now getting increasingly exposed to microplastic contamination due to their proximity to human activities and their position as critical transitional zones between land and sea. The present study reviews the status of MPs contamination specifically in mangrove ecosystems situated in Asia. Different sources and characteristics of MPs, subsequent deposition of MPs in mangrove water and sediments, bioaccumulation in different organisms are discussed in this context. MP concentrations in sediments and organisms were higher in mangrove forests exposed to fishing, coastal tourism, urban, and industrial wastewater than in pristine areas. The distribution of MPs varies from organism to organism in mangrove ecosystems, and is significantly influenced by their morphometric characteristics, feeding habits, dwelling environment etc. Mangrove plants can accumulate microplastics in their roots, stem and leaves through absorption, adsorption and entrapment helping in reducing abundance of microplastic in the surrounding environment. Several bacterial and fungal species are reported from these mangrove ecosystems, which are capable of degrading MPs. The bioremediation potential of mangrove plants offers an innovative and sustainable approach to mitigate microplastic pollution. Diverse mechanisms of MP biodegradation by mangrove dwelling organisms are discussed in this context. Biotechnological applications can be utilized to explore the genetic potential of the floral and faunal species found in the Asian mangroves. Detailed studies are required to monitor, control, and evaluate MP pollution in sediments and various organisms in mangrove ecosystems in Asia as well as in other parts of the world.

A multi-factor analysis evaluating the toxicity of microplastics on algal growth

Marine and freshwater bodies are the primary destinations of microplastics (MPs), where MPs can interact closely with algae. Here, we synthesized existing literature on the effect of MPs on algal growth. Studies examining the effects of MPs on algal growth have yielded conflicting results. Some studies reported growth inhibition, whereas others showed no significant effect or even growth enhancement. Data from 71 studies in the subject area were evaluated using cross-tables, scatterplots, and chi-square tests of independence, and four factors (polymer type, algal type, MP size, MP concentration) likely influencing the observations were identified. Experiments using certain polymers of plastic, such as polyvinyl chloride, and algal phyla, such as Chlorophyta, were more likely to show growth inhibition. Higher MP concentrations were more likely to reduce algal growth, which was further amplified by exposure time. However, MP size appeared to exhibit a nonlinear relationship with algal growth inhibition, suggesting that different MP sizes may elicit different effects. Finally, this review highlights the need for more standardized data collection and analysis methods as well as future research focused on exploring the possible mechanisms of growth hindrance and algae exposure to environmentally relevant conditions.

Occurrence of microplastics in three types of household cleaning products and their estimated emissions into the aquatic environment

Microplastics (MPs) in household cleaning products are a significant source of primary MPs. However, their presence in these products remain largely unknown. In this study, three types of common household cleaning products (laundry detergents, toilet bowl cleaners, and dishwashing detergents) were examined to assess the presence of MPs. The potential global emissions of MPs into aquatic environments resulting from the use of these products were estimated using statistics on global wastewater treatment plants (WWTPs) and household cleaning product markets. The average abundance of MPs in household cleaning products was 564.97 ± 327.83 n·kg-1, with toilet bowl cleaners having a significantly higher abundance than the other two products. The most commonly detected polymers in these products were polyamide (PA), silicone, polyurethane (PU), acrylate copolymer (ACR), polyethylene (PE), and polyethylene terephthalate (PET), while the size of the MPs ranged from 21.34 to 442.97 μm, with 81.52 % being <50 μm and 87.32 % being fragment-shaped. The estimated annual MP emissions from these three types of household cleaning products were 3.88 × 1013 ± 1.35 × 1013, with toilet bowl cleaners accounting for 56.44 % of the total emissions. MPs directly released without treatment in WWTPs (2.46 × 1013 n year-1) accounted for 63.40 % of the total emissions, highlighting the importance of increasing the treated rate of wastewater to reduce MP emissions. Sensitivity tests indicated that increasing the MP removal rates of secondary and tertiary WWTPs could also effectively reduce MP emissions. Moreover, gross and per capita MP emissions in 149 countries showed significant differences, which could be attributed to population, market size, demand for household cleaning products, and the level of MP removal among different countries. The findings of this study provide important insights into controlling MP contamination in household cleaning products.

Microplastics in inland and offshore sediments in the Apulo-Lucanian region (Southern Italy)

Inland and offshore sediments from Southern Italy were studied in order to evaluate the occurrence and nature of microplastics (MPs). Inland sediments were collected in the Bradano and Basento rivers (Apulo-Lucanian region, Southern Italy), while offshore sediments were collected on the continental shelf near Bari (Adriatic Sea) and Metaponto (Ionian Sea). MPs were detected and characterized using optical microscopy, micro-Fourier-Transform Infrared spectroscopy (μ-FTIR) and micro-Raman analyses. The number of MPs present varied between 144 and 1246 kg-1 of dry sediment (468.8 ± 410,7 MPs kg-1) with a predominance of black fibers; no correlation emerged between MPs and sediment grain size. In river sediments, the occurrence of MPs is associated with local pollution, whereas the offshore occurrence of MPs depends on seasonal river flow and submarine canyons. Compositional analyses suggest that the main source of MPs in the studied sediments is sewage discharge from residential areas.

A beaker method for determination of microplastic concentration by micro-Raman spectroscopy

Fourier-transform infrared (FT-IR) spectroscopy method for measuring small microplastic (SMP) concentration in marine environment is time-consuming and labor-intensive due to sample pre-treatment. In contrast, Raman spectroscopy is less influenced by water and can directly measure SMP samples in water, making it a more efficient method to measure SMP concentration. Therefore, a method that can directly estimate the concentration of SMPs in water was developed, and the relationship between SMP concentration and experimental Raman spectra were established by testing with standard polyethylene (PE) samples. It was found that average spectra acquired in water solution could reflect characteristic peaks of the plastic after baseline correction. Further investigation found that there is a significant functional relationship between correlation coefficient of sample spectra and the concentration of PE particles, and such relationship can be modelled by Langmuir model. The empirical functional relationships can be used to estimate SMP concentrations by measuring average Raman spectra. The developed methodology is helpful for developing rapid SMP identification and monitoring methods in a more complex manner.•A method of directly measuring MP concentration in water is proposed.•Experimental procedures are provided.•Data analysis methods are outlined.

Microplastic accumulation in bivalves collected from different coastal areas of Vietnam and an assessment of potential risks

Microplastic (MP) pollution is an emerging problem in many areas around the world and in coastal areas of Vietnam, requiring more studies dedicated to the accumulation of this pollutant in the food chain as well as its potential risk to human health. This study investigated MP levels in tissues of five common bivalve species collected from aquaculture areas along the coast of Vietnam. MPs were found in all bivalve samples, with average values of 10.84 ± 2.61 items/individual or 2.40 ± 1.34 items/g wet weight. Impacts of feeding habits of bivalves showed influences on MP abundance in the samples. Fibers were the dominant shape of MPs recorded, most of which accumulated in the gills and digestive glands of all bivalve samples, with the majority falling within the size range of 300-2000 µm. MPs found in all studied species had relatively similar chemical compositions, mainly composed of polypropylene (PP) and polyethylene (PE). In this study, a diverse diet consisting of different bivalve species and detailed data on the consumption rate of these species were used to assess the human health risk of MPs dedicated to the coastal communities of Vietnam. The results suggested a significant part of MP uptake by human could be via bivalve consumption, in which removing viscera and proper depuration should be applied prior to eating, thereby reducing the risk.

The potential of Lecane rotifers in microplastics removal

Dealing with hard-to-degrade plastics pollution of terrestrial and aquatic environments is one of the most urgent problems of the modern world. The smallest fraction (<5 mm) called micro-plastics (MP) has been found everywhere from ice in Greenland, streams, rivers, soil and even in the human placenta. The goal of our research was to assess the ability of rotifers Lecane inermis to remove micro-plastics suspended in the water column. In the experiments we investigated specific interactions between MP, biofilm and rotifers specialized in feeding on biofilm. We hypothesized that MP adhere to the biofilm and after ingestion by rotifers could be extracted from the water in the form of compact conglomerates excreted with fecal pellets. In these experiments, we demonstrated that: (i) the rotifers preferentially ingest microplastics embedded in biofilm, (ii) the presence of microplastics does not affect growth and fecundity of rotifers, and (iii) that MP aggregation is significantly improved by the presence of biofilm, additionally enhanced in the presence of rotifers. Our findings will help to understand the role of micro-grazers, such as L. inermis feeding on biofilm, in the fate of MP in nature. In the longer term, our results could help to develop biotechnological tools for MP removal from the aquatic environment.

Trophic transfer increases the exposure to microplastics in littoral predators

Predators in aquatic environments can be exposed to microplastics (MPs) directly through water and indirectly through prey. Laboratory experiments were conducted to study the potential of MP trophic transfer in Baltic Sea littoral food chains of different lengths. The longest studied food chain had three trophic levels: zooplankton, chameleon shrimp (Praunus flexuosus) and rockpool prawn (Palaemon elegans). 10 μm fluorescence microspheres were used as tracer MP particles and MP ingestion was verified with epifluorescence microscopy. Transfer of MPs occurred up to both second and third trophic level. The number of ingested microspheres in both chameleon shrimp and rockpool prawn was higher when the animals were exposed through pre-exposed prey in comparison to direct exposure through the water. The results show that trophic transfer may be an important pathway of and increase the microplastic exposure for some animals at higher trophic levels in highly polluted areas.

Distribution, characterization and contamination risk assessment of microplastics in the sediment from the world's top sediment-laden estuary

Microplastics (MPs) have gained a serious attention as an emerging contaminant throughout the world because of their persistence and possible risks to aquatic ecosystems and human well-being. However, knowledge on MPs contamination from sub-tropical coastal systems is limited, and no study has been conducted on the MPs contamination in sediment from one of the highest sediment-laden estuaries, Meghna River, in the world. This is the first study to examine the quantity, morpho-chemical characteristics and contamination risk level of MPs from this large scale river. MPs were extracted from the sediment samples of 10 stations along the banks of the estuary by density separation, and then characterized using a stereomicroscope and Fourier Transform Infrared (FTIR) spectroscopy. The incidence of MPs varied from 12.5 to 55 item/kg dry sediment with an average of 28.67 ± 10.80 item/kg. The majority (78.5%) of the MPs were under 0.5 mm in size, with fibers being the most (74.1%) prevalent MPs type. Polypropylene (PP) was found to be the predominant polymer (53.4%), followed by polyethylene (PE, 20%), polystyrene (PS, 13.3%), and polyvinyl chloride (PVC, 13.3%). The highest occurrence of PP indicted the MPs in the estuary might be originated from clothing and dying industries, fishing nets, food packages, and pulp industries. The sampling stations were contaminated with MPs as shown by the contamination factor (CF) values and pollutant load index (PLI), both of which were >1. This study exposed new insights on the status of MPs in the sediments of the Meghna River, laying the groundwork for future research. The findings will contribute to estimate the global share of MPs to the marine environment.

Plasticiser leaching from polyvinyl chloride microplastics and the implications for environmental risk assessment

Microplastics in aquatic environments is a growing concern, particularly due to the leaching of chemical additives such as plasticisers. To develop comprehensive environmental risk assessments (ERAs) of high-concern polymers and plasticisers, an understanding of their leachability is required. This work investigated diethylhexyl phthalate (DEHP) and bisphenol A (BPA) leaching from polyvinyl chloride (PVC) microplastics (average diameter = 191 μm) under simulated marine conditions. Leaching behaviours were quantified using gel permeation chromatography (GPC) and thermal gravimetric analysis (TGA), and the polymer's physiochemical properties analysed using differential scanning calorimetry (DSC), Fourier Transform-Infrared Spectroscopy (FT-IR) and optical microscopy. Experimental data were fitted to a diffusion and boundary layer model, which found that BPA leaching was temperature-dependent (diffusion-limited), whereas DEHP leaching was controlled by surface rinsing. Model predictions also highlighted the importance of microplastic size on leaching dynamics. These data contribute towards greater accuracy in ERAs of microplastics, with implications for water quality and waste management, including decommissioning of plastic infrastructure.

Microplastics in the marine environment of St. Mary's Island: implications for human health and conservation

Microplastics have now been identified as a class of emerging pollutants and is considered as a threat to aquatic organisms. This baseline paper investigated the distribution, composition, and potential ecological risks of microplastic (MP) pollution on St. Mary's Island, revealing an average abundance of 0.218 particles/L in water samples. Blue fibres and white foams were the primary MPs identified, and fishing activities and packaging were the main sources of pollution. Six types of polymers were identified: low-density polyethylene (LDPE), polystyrene (PS), polyamide (PA), polypropylene (PP), polyethylene (PE), and high-density polyethylene (HDPE). The Polymer Hazard Index (PHI) and Potential Ecological Risk Index (PERI) indicated a medium environmental risk for the island. Additionally, it was discovered that MPs' surfaces contained dangerous substances that could endanger aquatic life. The research emphasizes the significance of implementing measures such as responsible disposal, management, elimination, regulatory policies, and local administration techniques to mitigate the impact of MP pollution on the island's shores and marine biota. This research provides a baseline for monitoring MP contamination and underscores the need for continuous investigation to assess their impacts on marine life.

Prevalence of microplastics in commonly consumed fish species of the river Old Brahmaputra, Bangladesh

Microplastics (MPs) are pervasive in aquatic environments, but inland waterbodies (rivers and floodplains) have received much less attention. The present study assesses the incidence of MPs in the gastrointestinal tracts of five commercially important edible fish species-two column feeders (n = 30) and three benthivores (n = 45) from upstream, midstream, and downstream of the Old Brahmaputra river in north-central Bangladesh. MPs were detected in 58.93% of fish, with the highest level in freshwater eel, Mastacembelus armatus (10.31 ± 0.75/fish). Fibers (49.03%) and pellets (28.02%) were the most frequent MPs. Nearly 72% MPs were smaller than 1 mm, and 50.97% were black. FTIR analysis showed 59% polyethelene (PE), followed by polyamide (40%) and unidentified (1%). MP ingestion was linked to fish size and weight, and a high incidence was recorded in the downstream river. Two omnivorous benthic fish ingest more MPs than others. The results corroborate the presence of MPs in the inland river and fish fauna and augment our understanding of heterogeneous MP uptake by fish.

The unheeded inherent connections and overlap between microplastics and poly- and perfluoroalkyl substances: A comprehensive review

Microplastics (MPs) and poly- and perfluoroalkyl substances (PFASs) are receiving global attention due to their widespread presences and considerable level in the environment. Although the occurrence and fate of MPs and PFASs alone have been extensively studied, little was known about their unheeded connection and overlap between the two. Therefore, this review attempts to reveal it for the purpose of providing a new view from joint consideration of the two in the future studies. Initially, the critically examined data on the co-sources and existence of MPs and PFASs are summarized. Surprisingly, some products could be co-source of MPs and PFASs which are general in daily life while the distribution of the two is primary influenced by the human activity. Then, their interactions are reviewed based on the fact that PFASs can be sorbed onto MPs which are regarded as a vector of contaminations. The electrostatic interaction and hydrophobic contact are the predominant sorption mechanisms and could be influenced by environmental factors and properties of MPs and PFASs. The effects of MPs on the transport of PFASs in the environments, especially in aquatic environments are then discussed. Additionally, the current state of knowledge on the combined toxicity of MPs and PFASs are presented. Finally, the existing problems and future perspectives are outlined at the end of the review. This review provides an advanced understanding of the overlap, interaction and toxic effects of MPs and PFASs co-existing in the environment.

Riverine Microplastic Pollution: Insights from Cagayan de Oro River, Philippines

Rivers are vital water sources for humans and homes for aquatic organisms. Conversely, they are well known as the route of plastics into the ocean. Despite being the world's number one emitter of riverine plastics into the ocean, microplastics (MPs), or plastic particles less than 5 mm, in the Philippines' rivers are relatively unexplored. Water samples were collected from six sampling stations along the river channel of the Cagayan de Oro River, one of the largest rivers in Northern Mindanao, Philippines. The extracted microplastics' abundance, distribution, and characteristics were analyzed using a stereomicroscope and Fourier transform infrared spectroscopy (FTIR). The results showed a mean concentration of 300 items/m³ of MPs dominated by blue-colored (59%), fiber (63%), 0.3-0.5 mm (44%), and polyacetylene (48%) particles. The highest concentration of microplastics was recorded near the mouth of the river, and the lowest was in the middle area. The findings indicated a significant difference in MP concentration at the sampling stations. This study is the first assessment of microplastic in a river in Mindanao. The results of this study will aid in formulating mitigation strategies for reducing riverine plastic emissions.

Biosorption of sub-micron-sized polystyrene microplastics using bacterial biofilms

Microplastics are becoming a global concern because they pose potential ecological and toxicological risks to organisms. Thus, removing microplastics from aquatic environments is important. In this study, we evaluated the capability of bacterial biofilms as a biological source for the biosorptive removal of sub-micron-sized polystyrene (PS) microplastics. Three bacterial strains-specifically, Pseudomonas aeruginosa, Bacillus subtilis, and Acinetobacter sp.-were used to form biofilms, and each biofilm was tested in batch experiments for the removal of sub-micron-sized PS microplastics. The Acinetobacter sp. biofilm demonstrated excellent removal performance against 430 nm-PS microplastics than other bacterial biofilms and showed a removal capacity of 715.5 mg/g upon treatment with the PS microplastics for 20 min, thus it employed further adsorption experiments. The biosorption of 430 nm-PS microplastics onto the Acinetobacter sp. biofilm was well explained by the pseudo-second-order kinetics and Freundlich isotherm models. Fourier transform infrared analysis indicated that biosorption of 430 nm-PS microplastics onto the Acinetobacter sp. biofilm involved chemisorption. Three environmental parameters-temperature, pH, and coexisting ions-marginally affected the biosorption of 430 nm-PS microplastics onto Acinetobacter sp. biofilm. However, the biosorption capability of Acinetobacter sp. biofilm was diminished when the 430 nm-PS microplastics were incubated in environmental freshwaters for 7 d.

Functional Trait-Based Evidence of Microplastic Effects on Aquatic Species

Microplastics represent an ever-increasing threat to aquatic organisms. We merged data from two global scale meta-analyses investigating the effect of microplastics on benthic organisms' and fishes' functional traits. Results were compared, allowing differences related to vertebrate and invertebrate habitat, life stage, trophic level, and experimental design to be explored. Functional traits of aquatic organisms were negatively affected. Metabolism, growth, and reproduction of benthic organisms were impacted, and fish behaviour was significantly affected. Responses differed by trophic level, suggesting negative effects on trophic interactions and energy transfer through the trophic web. The experimental design was found to have the most significant impact on results. As microplastics impact an organism's performance, this causes indirect repercussions further up the ecological hierarchy on the ecosystem's stability and functioning, and its associated goods and services are at risk. Standardized methods to generate salient targets and indicators are urgently needed to better inform policy makers and guide mitigation plans.

Microplastics in water, feed and tissues of European seabass reared in a recirculation aquaculture system (RAS)

Plastic particles (PLs) are ubiquitous in aquatic ecosystems and aquaculture production is susceptible to contamination from external or endogenous sources. This study investigated PL presence in water, fish feed and body sites of 55 European seabass produced in a recirculating aquaculture system (RAS). Fish morphometric parameters and health status biomarkers were determined. A total of 372 PLs were recovered from water (37.2 PL/L), 118 PLs from feed (3.9 PL/g), and 422 from seabass (0.7 PL/g fish; all body sites analysed). All 55 specimens had PLs in at least two of the four body sites analysed. Concentrations were higher in the gastrointestinal tract (GIT; 1.0 PL/g) and gills (0.8 PL/g) than in the liver (0.8 PL/g) and muscle (0.4 PL/g). PL concentration in GIT was significantly higher than in muscle. Black, blue, and transparent fibres made of man-made cellulose/rayon and polyethylene terephthalate were the most common PLs in water and seabass, while black fragments of phenoxy resin were the most common in feed. The levels of polymers linked to RAS components (polyethylene, polypropylene, and polyvinyl chloride) were low suggesting a limited contribution to the overall PL levels found in water and/or fish. The mean PL size recovered from GIT (930 μm) and gills (1047 μm) was significantly larger than those found in the liver (647 μm) and dorsal muscle (425 μm). Considering all body sites, PLs bioconcentrated in seabass (BCF_Fish >1) but their bioaccumulation did not occur (BAF_Fish <1). No significant differences were observed in oxidative stress biomarkers between fish with low (<7) and high (≥7) PL numbers. These findings suggest that fish produced in RAS are mainly exposed to MPs through water and feed. Further monitoring under commercial conditions and risk assessment are warranted to identify potential threats to fish and human health and define mitigating measures.

Adverse health effects and mechanisms of microplastics on female reproductive system: a descriptive review

Microplastics (MPs), with a diameter of less than 5 mm, include polymers such as polystyrene, polypropylene, and polyethylene. The MPs occur in different morphologies including fragments, beads, fibers, and films that are swallowed by fresh water and land-based animals and enter their food chain, where they produce hazardous effects such as uterine toxicity, infertility, and neurotoxicity. The aim of this review is to explore the effects of polystyrene MPs (PS-MPs) on the female reproductive system and understand the mechanisms by which they produce reproductive toxicity. Several studies suggested that the exposure to PS-MPs increased the probability of larger ovaries with fewer follicles, decreased the number of embryos produced, and decreased the number of pregnancies in female mice. It also changed sex hormone levels and caused oxidative stress, which could have an impact on fertility and reproduction. Exposure to PS-MPs caused the death of granulosa cells through apoptosis and pyroptosis via activation of the NLRP3/caspase pathway and disruption of the Wnt-signaling pathway. Activation of TL4/NOX2 caused the uterine fibrosis resulting in endometrium thinning. The PS-MPs had a negative impact on ovarian capacity, oocyte maturation, and oocyte quality. Furthermore, the PS-MPs disrupted the hypothalamus-pituitary-gonadal axis in marine animals, resulting in a decrease in hatching rate and offspring body size, causing trans-generational effects. It also reduced fecundity and produced germ-line apoptosis. The main focus of this review was to explore the different mechanisms and pathways through which PS-MPs adversely impact the female reproductive system.

Characteristics and hazard risk of microplastics in Sinonovacula constricta: from farming to market

In this paper, I selected Sinonovacula constricta, a typical representative of commercial bivalve shellfish from Zhangzhou City, and found that microplastics were detected in all the samples with small sizes. The abundance in farm samples (3.65 n/g) was higher than in market samples (0.89 n/g), despite their smaller weight, which was mainly contributed by body fluid. Microplastics transported from the body fluid to the viscera and then metabolized into muscle were substantially reduced (69.3%), with only 0 or 1 microplastic observed in the muscles on the micron scale. The microplastics detected in the market samples were mainly concentrated in the viscera, accounting for 81%, while distributed in all the organs of farm samples, with body fluids accounting for 52%. A total of four shapes were detected, with the highest percentage of fibrous shape, while foam-like microplastics were not detected in the market samples. The abundance was not correlated with sample weight, but market samples showed a positive correlation. A total of seven polymers were detected, with the highest rate of polypropylene (PP) (27%). The polymer risk level reached level III. The percentage of polyvinyl chloride (PVC) in the market samples exceeded that of farms, which resulted in a higher hazard risk index despite their lower abundance. The cleaning process and excretory behavior, from farms to markets, greatly reduced microplastic contamination.

Multigenerational effects of microplastic fragments derived from polyethylene terephthalate bottles on duckweed Lemna minor: Size-dependent effects of microplastics on photosynthesis

The 2019 global coronavirus disease pandemic has led to an increase in the demand for polyethylene terephthalate (PET) packaging. Although PET is one of the most recycled plastics, it is likely to enter the aquatic ecosystem. To date, the chronic effects of PET microplastics (MPs) on aquatic plants have not been fully understood. Therefore, this study aimed to investigate the adverse effects of PET MP fragments derived from PET bottles on the aquatic duckweed plant Lemna minor through a multigenerational study. We conducted acute (3-day exposure) and multigenerational (10 generations from P0 to F9) tests using different-sized PET fragments (PET_0-200, < 200 μm; PET_200-300, 200-300 μm; and PET_300-500, 300-500 μm). Different parameters, including frond number, growth rate based on the frond area, total root length, longest root length, and photosynthesis, were evaluated. The acute test revealed that photosynthesis in L. minor was negatively affected by exposure to small-sized PET fragments (PET_0-200). In contrast, the results of the multigenerational test revealed that large-sized PET fragments (PET_300-500) showed substantial negative effects on both the growth and photosynthetic activity of L. minor. Continuous exposure to PET MPs for 10 generations caused disturbances in chloroplast distribution and inhibition of plant photosynthetic activity and growth. The findings of this study may serve as a basis for future research on the generational effects of MPs from various PET products.

Impact of Particulate Pollution on Aquatic Invertebrates

A serious global problem, air pollution poses a risk to both human and environmental health. It contains hazardous material like heavy metals, nanoparticles, and others that can create an impact on both land and marine environments. Particulate pollutants, which can enter water systems through a variety of ways, including precipitation and industrial runoff, can have a particularly adverse influence on aquatic invertebrates. Once in the water, these particles can harm aquatic invertebrates physically, physiologically, and molecularly, resulting in developmental problems and multi-organ toxicity. Further research at the cellular and molecular levels in numerous locations of the world is necessary to completely understand the impacts of particle pollution on aquatic invertebrates. Understanding how particle pollution affects aquatic invertebrates is vital as the significance of ecotoxicological studies on particulate contaminants increases. This review gives a comprehensive overview of the current understanding of how particle pollution affects aquatic invertebrates.

Subterranean transport of microplastics as evidenced in karst springs and their characterization using Raman spectroscopy

The increasing use of plastic materials has led to accumulation of large amounts of plastic waste in environment and a global challenge to be tackled with. The natural process of macro-plastics aging generates a multitude of secondary microplastic fragments accumulating in all areas of the planet. The pollution with microplastics of large water bodies, such as rivers, seas and oceans was already proven, but the presence of microplastics even in karst spring water was not reported yet. In this study, Raman micro-spectroscopy was used to confirm the presence of microplastics in the spring water samples collected from two rural karst springs in the Apuseni Mountains (Țarina and Josani), North-Western Romania. Two sets of water samples of 1000 L collected in spring time 2021 and one in autumn 2021 were filtered and analyzed. Using the Python programming language and combining two separate Raman databases, one for plastics and the other for pigments, we established a customized database to unambiguously identify the type of plastic and pigment present in the discovered micro-fragments. The generated reference pigment-plastic spectra were compared to those of potential microplastics found on filters and Pearson's coefficient was used to measure the level of similarity. The presence of microplastics in karst spring waters was confirmed and a quantitative estimation expressed as number of fragments or fibers per liter was 0.034 in Josani and 0.06 in Țarina karst spring. Five months later sampling (autumn 2021) revealed 0.05 microplastics per liter. The spectral results revealed that most microplastics found were dominated by polyethylene terephthalate (PET), followed by polypropylene and interestingly, abundant blue micro-fragments were identified according to their copper phthalocyanine pigments (pigment Blue 15) or indigo carmine (pigment Blue 63) characteristic spectral fingerprints, which surpassed the inherent spectral background level characteristic for the Raman spectra of naturally contaminated waste micro-samples. Their origin in mountain karst spring waters and potential decrease in time is discussed.

Distribution of microplastics in different tissues of major commercial catches in different functional areas of the South Yellow Sea

The microplastic (MP) pollution in different tissues of six commercial catches, including (Miichthys miiuy, Eleutheronema tetradactylum, Collichthys lucidus, Mugil cephalus, Portunus trituberculatus and Exopalaemon carinicauda) in Haizhou Bay (nori farming area), Yancheng offshore (wind power construction area) and the Nantong marine ranch area of the South Yellow Sea was investigated. MPs are ubiquitous in commercial catches; the average abundance of MPs is 5.19 ± 3.64 items/individual. There are significant differences in the level of MP pollution in commercial catches among functional sea areas. The level of MP pollution in commercial catches in Haizhou Bay and Yancheng offshore is higher than that in the Nantong marine ranch areas. This difference may be related to intense anthropogenic activities such as engineering construction and mariculture. In addition to the presence in digestive tract, MPs in the skin and gills of fish and in the gills of shrimp and crabs cannot be ignored. The main shape, color and material of MPs are fiber, black-gray and celluloid (CP), respectively. Since commercial catches are consumed by humans, the potential risks of MPs in these catches to human health and marine ecology are of concern.

Characterization of microplastic pollution in the Pasur river of the Sundarbans ecosystem (Bangladesh) with emphasis on water, sediments, and fish

An emerging concern of today's world, due to their universal dispersion worldwide, is the environment's microplastic pollution. The Sundarbans, the world's largest mangrove, have unique and dynamic environmental settings with numerous pollution risk exposures, including microplastics (MPs). Thus, the present study has focused on the MP pollution in water, sediment, and fish samples of the Sundarbans of Bangladesh for the first time. Water and sediment samples were collected (n = 30/each) from sampling locations along the Pasur river (Bangladesh). Furthermore, nine species of fish samples were collected from a local fish market situated at the Mongla port. Results show that 100 % of the analyzed samples have evidence of MPs. On average, 2.66 × 10³ plastic particles/L and 1.57 × 10⁵ particles/kg were found in water and sediment samples, respectively. Furthermore, results show a higher number of MPs in the animals' gastrointestinal tract (GIT) (10.41 particles/g), concerning the average concentration recorded in the muscles (4.68 particles/g). O. pama and H. nehereus were the species that showed the highest MPs accumulation in the GIT. In the muscles, the highest MP levels were observed in T. ilisha and L. calcarifer. Most of the particles were smaller than 1 mm; black-colored particles dominated the pool. FT-IR analysis revealed the presence of seven polymer types where polyamide was abundant in water and sediment samples. SEM analysis showed morphological structures and adsorbed particles on the surface of plastic samples, and the spatial distribution of MPs indicates that the location with high human intervention has elevated levels of MPs. Therefore, our study demonstrates that Sundarbans mangrove forests are highly contaminated with MPs and that its fisheries can be a potential source of human exposure to these pollutants.

Investigation of dynamic change in microplastics vertical distribution patterns: The seasonal effect on vertical distribution

This paper analyzes the variability of microplastics vertical distributions in the oceanic water column. Data were obtained from targeted sampling in the Bay of Marseille (France) and from a numerical simulation forced by realistic physical forcings. By fitting model and in-situ data in a simplified vertical dimension, three microplastics classes may be deduced: settling, buoyant and winter neutrally-buoyant microplastics. Buoyant microplastics are mainly concentrated at the surface but they can be mixed throughout the whole water column during episodes with strong winds and no water stratification, inducing an implicit underestimation of buoyant microplastics in surface sampling. Almost symmetrical to the distribution of buoyant microplastics, settling microplastics are mainly found at the bottom but they can sometimes reach the surface under the mixing conditions cited above. They could thus contribute to surface sampling. Winter neutrally-buoyant microplastics are more homogenously mixed during the winter but are under the stratified layers during summer.

Microplastics pollution in freshwater fishes in the South of Italy: Characterization, distribution, and correlation with environmental pollutants

In this study, we investigated the presence, abundance, and chemical nature of microplastics (MPs) in the freshwater fish gastrointestinal tract in the South of Italy, and evaluated the possible correlation between MPs and environmental pollutants. Fifty specimens belonging to five species (Scardinius erythrophthalmus, Barbus barbus, Rutilus rubilio, Leuciscus cephalus, Salmo trutta), from twenty sites were collected. MPs chemical feature was identified by means of Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) and Raman microscopy. MPs were represented by 34.86 % fragments, film, and foam (all together MPs) and 65.14 % by fibers (MFs). The mean number of MPs/MFs per fish ranged from 6.25 ± 4.35 in R. rubilio and 2.26 ± 1.94 in B. barbus. The highest number of MPs/MFs per g of GIT was found in R. rubilio (9.07 ± 9.66), and the lowest in S. erythrophthalmus (0.75 ± 0.53). The highest number of MPs/MFs per fish species was found in L. cephalus (16), and the lowest in S. erythrophthalmus (4). Black predominated in every type of plastic debris identified, followed by blue and white, respectively for MFs and MPs. Polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP), were the main plastic polymers found. At fish sampling sites, comparing concentrations in soils of potentially toxic elements and persistent organic pollutants with the number of MPs/MFs in fish, a significant correlation was noted with polychlorinated biphenyls (PCBs) and, in particular, with PCB 105, PCB 118, PCB 156, PCB 157, and PCB 167. A strong correlation was also observed with all types of polycyclic aromatic hydrocarbon (PAHs) particularly with benzo(ghi)perylene, dibenz(a,h)anthracene, benzo(b)fluoranthene, benz(a)anthracene, benzo(a)pyrene, and pyrene. The results of this study would be useful to draft management and action plans, promote intervention plans aiming at removing threats to species and habitats, and address ways of renaturalization.

How plastic debris and associated chemicals impact the marine food web: A review

Contamination from plastic debris is omnipresent in marine environments, posing a substantial risk to marine organisms, food webs and the ecosystem. The overlap between the size range of marine plastic pollution with prey means that plastics are readily available for consumption by organisms at all trophic levels. Large plastic debris can directly result in the death of larger marine organisms, through entanglement, strangulation, choking and starvation through a false sense of satiation. Whereas smaller plastic debris, such as micro- and nano-plastics can have adverse impact to marine organisms due to their large surface area to volume ratio and their ability to translocate within an organism. Various physiological processes are reported to be impacted by these small contaminants, such as feeding behaviour, reproductive outputs, developmental anomalies, changes in gene expression, tissue inflammation and the inhibition of growth and development to both adults and their offspring. Micro- and nano-plastics are still relatively poorly understood and are considered a hidden threat. Plastic is a complex contaminant due to the diversity in sizes, shapes, polymer compositions, and chemical additives. These factors can each have unique and species-specific impacts. Consumption of plastics can occur directly, through ingestion and indirectly, through trophic transfer, entanglement of prey, adherence of plastics to external surfaces, and adherence of organisms to the external surfaces of plastics. This review investigated the intrusion of plastics into the marine food web and the subsequent consequences of plastic pollution to marine biota.The objective of this review was to identify the complexity of impacts to marine organisms through the food web from plastic contamination. Through a concise analysis of the available literature the review has shown that plastic pollution and their associated additives can adversely impact environmental and biological health.

The risks of marine micro/nano-plastics on seafood safety and human health

A considerable mass of plastics has been released into the marine environment annually through different human activities, including industrial, agriculture, medical, pharmaceutical and daily care products. These materials are decomposed into smaller particles such as microplastic (MP) and nanoplastic (NP). Hence, these particles can be transported and distributed in coastal and aquatic areas and are ingested by the majority of marine biotas, including seafood products, thus causing the contamination of the different parts of aquatic ecosystems. In fact, seafood involves a wide diversity of edible marine organisms, such as fish, crustaceans, molluscs, and echinoderms, which can ingest the micro/nanoplastics particles, and then transmit them to humans through dietary consumption. Consequently, these pollutants can cause several toxic and adverse impacts on human health and the marine ecosystem. Therefore, this chapter provides information on the potential risks of marine micro/nanoplastics on seafood safety and human health.

Microplastics (MPs) in marine food chains: Is it a food safety issue?

The enormous usage of plastic over the last seven decades has resulted in a massive quantity of plastic waste, much of it eventually breaking down into microplastic (MP) and nano plastic (NP). The MPs and NPs are regarded as emerging pollutants of serious concern. Both MPs and NPs can have a primary or secondary origin. Their ubiquitous presence and ability to sorb, desorb, and leach chemicals have raised concern over their presence in the aquatic environment and, particularly, the marine food chain. MPs and NPs are also considered vectors for pollutant transfer along with the marine food chain, and people who consume seafood have began significant concerns about the toxicity of seafood. The exact consequences and risk of MP exposure to marine foods are largely unknown and should be a priority research area. Although several studies have documented an effective clearance mechanism by defecation, significant aspect has been less emphasized for MPs and NPs and their capability to translocate in organs and clearance is not well established. The technological limitations to study these ultra-fine MPs are another challenge to be addressed. Therefore, this chapter discusses the recent findings of MPs in different marine food chains, their translocation and accumulations potential, MPs as a critical vector for pollutant transfer, toxicology impact, cycling in the marine environment and seafood safety. Besides, the concerns and challenges that are overshadowed by findings for the significance of MPs were covered.

Microplastic abundance, distribution, and characterization in freshwater sediments in Iran: a case study in Kermanshah city

This paper focuses on abundance, distribution, and characteristics of microplastics (MPs) in freshwater sediments of Sarab Niloofar Lake, Kermanshah, Iran. After selecting an appropriate method for extraction of MPs, the characterization such as polymer types, surface morphology, and trace elements has been determined using Fourier transform infrared spectroscopy, scanning electron microscopic, and energy-dispersive X-ray spectroscopic analysis, respectively. The results highlighted that all sampling locations were contaminated by MP abundance ranged from 1733.33 to 4400 items kg^-1 d.w with an average of 2483.59 ± 805.30 items kg^-1 d.w. MPs with a size range of 0.025 to 1 mm (25-1000 μm) were the most frequently detected MPs in size (62%). Furthermore, the MPs found in this area mainly contain fiber (61%), fragment (19%), film (9%), foam (6%), and pallet (5%). The main color for detected MPs in sampling stations was black (51%) and followed by white/transparent (27%), red (11%), blue (7%), and yellow (4%). The results of polymer identification revealed that the polyethylene, polystyrene, polyurethane, and polypropylene were the principal polymers. This research work emphasized that various types of MPs have been distributed in freshwater sediments of Sarab Niloofar Lake, which is a first useful data for MPs in one the most important Kermanshah's tourist area.

Microplastics toxicity, detection, and removal from water/wastewater

The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.