Diagnostic accuracy of LAMP versus PCR over the course of SARS-CoV-2 infection

Towards the identification of body fluids using RT-LAMP isothermal amplification coupled with CRISPR-Cas12a

While often necessary in sexual assault cases, confirmatory identification of body fluids can be a lengthy and/or costly process. In particular, the detection of vaginal fluid and menstrual fluid in forensic casework is limited to endpoint reverse-transcription PCR to detect fluid-specific messenger RNA (mRNA) markers as there are no robust chemical or enzymatic techniques available for these fluids. Similarly, testing for rectal mucosa is not possible with standard methods, the presence of which would provide probative value in cases of alleged anal penetration, although mRNA-based markers have recently been described. Reverse-transcription loop-mediated isothermal amplification (RT-LAMP) is an alternative technique that enables detection of mRNA at a single temperature (usually 60-65℃) for 10-30 minutes and has comparable sensitivity to PCR. We describe the coupling of RT-LAMP amplification (60℃ for 30 minutes) with CRISPR-mediated fluorescent detection of the body fluid specific mRNA markers MMP3 (menstrual fluid), CYP2B7P (vaginal material), TNP1 (spermatozoa), KLK2 (semen), and MUC12 (rectal mucosa). Following temperature optimization and final selection of RT-LAMP-CRISPR assays, their specificity across circulatory blood, buccal, menstrual fluid, vaginal material, semen, and rectal mucosa was assessed. Most assays were specific for their intended target body fluid, although MMP3 and CYP2B7P were detected in some rectal mucosa samples, the latter of which has been observed previously in the literature. A preliminary sensitivity assessment in target fluids was determined by a dilution series over six logs of RNA input. A range of assay approaches were investigated to develop a protocol suitable for use in a forensic screening laboratory. This included the determination of fluorescent assay results by eye, use of lyophilised reagents, and RT-LAMP and CRISPR reactions undertaken in one-tube in a lower resource setting.

Loop-Mediated Isothermal Amplification for Diagnosis of Zoonotic Malaria

Zoonotic malaria, caused by Plasmodium knowlesi, Plasmodium cynomolgi, Plasmodium coatneyi, and Plasmodium inui, is a significant global health concern. The gold standard microscopy, while widely used for malaria diagnosis, faces limitations in differentiating between malaria species. Polymerase chain reaction (PCR), despite its accuracy, is characterized by high costs and time-consuming procedures. This study aims to develop and validate a rapid and accurate diagnostic test for detecting four simian Plasmodium species by using loop-mediated isothermal amplification (LAMP). Loop-mediated isothermal amplification is a cost-effective and faster molecular testing alternative for malaria diagnosis. The project involved designing specific primers, testing sensitivity and specificity against various parasites (including human Plasmodium species, protozoa, and helminths), and evaluating the LAMP assay using 60 macaque samples infected with simian Plasmodium. The LAMP assay exhibited a sensitivity profile enabling the detection of P. knowlesi, P. coatneyi, and P. cynomolgi across a concentration gradient from 5 × 108 down to 5 × 105 parasites/µL. Notably, P. inui was detectable at 5 × 108 parasites/µL. Furthermore, the specificity of the primer tailored for the four simian Plasmodium species was proven, as it produced a positive amplification exclusively for the respective target species and generated negative results for nontarget species. The results indicated that the LAMP assay is capable of detecting simian Plasmodium within a short span of 60 minutes, without any false positives from other samples. This new test has the potential to revolutionize malaria diagnosis, surveillance, and control, thereby mitigating the impact of zoonotic malaria in regions of endemicity.

Electrochemical biosensor for sensitive detection of SARS-CoV-2 gene fragments using Bi2Se3 topological insulator

In this study, we have designed an electrochemical biosensor based on topological material Bi2Se3 for the sensitive detection of SARS-CoV-2 in the COVID-19 pandemic. Flake-shaped Bi2Se3 was obtained directly from high-quality single crystals using mechanical exfoliation, and the single-stranded DNA was immobilized onto it. Under optimal conditions, the peak current of the differential pulse voltammetry method exhibited a linear relationship with the logarithm of the concentration of target-complementary-stranded DNA, ranging from 1.0 × 10-15 to 1.0 × 10-11 M, with a detection limit of 3.46 × 10-16 M. The topological material Bi2Se3, with Dirac surface states, enhanced the signal-to-interference plus noise ratio of the electrochemical measurements, thereby improving the sensitivity of the sensor. Furthermore, the electrochemical sensor demonstrated excellent specificity in recognizing RNA. It can detect complementary RNA by amplifying and transcribing the initial DNA template, with an initial DNA template concentration ranging from 1.0 × 10-18 to 1.0 × 10-15 M. Furthermore, the sensor also effectively distinguished negative and positive results by detecting splitting-synthetic SARS-CoV-2 pseudovirus with a concentration of 1 copy/μL input. Our work underscores the immense potential of the electrochemical sensing platform based on the topological material Bi2Se3 in the detection of pathogens during the rapid spread of acute infectious diseases.

Commercial Opportunity or Addressing Unmet Needs-Loop-Mediated Isothermal Amplification (LAMP) as the Future of Rapid Diagnostic Testing?

Loop-Mediated Isothermal Amplification (LAMP) technology is emerging as a rapid pathogen testing method, potentially challenging the RT-PCR "gold standard". Despite recent advancements, LAMP's widespread adoption remains limited. This study provides a comprehensive market overview and assesses future growth prospects to aid stakeholders in strategic decision-making and policy formulation. Using a dataset of 1134 LAMP patent documents, we analyzed lifecycle and geographic distribution, applicant profiles, CPC code classifications, and patent claims. Additionally, we examined clinical developments from 21 curated clinical trials, focusing on trends, geographic engagement, sponsor types, and the conditions and pathogens investigated. Our analysis highlights LAMP's potential as a promising rapid pathogen testing alternative, especially in resource-limited areas. It also reveals a gap between clinical research, which targets bacterial and parasitic diseases like malaria, leishmaniasis, and tuberculosis, and basic research and commercial efforts that prioritize viral diseases such as SARS-CoV-2 and influenza. European stakeholders emphasize the societal impact of addressing unmet needs in resource-limited areas, while American and Asian organizations focus more on research, innovation, and commercialization.

Cross comparison of alternative diagnostic protocols including substitution to the clinical sample, RNA extraction method and nucleic acid amplification technology for COVID-19 diagnosis

Background

the gold-standard diagnostic protocol (GSDP) for COVID-19 consists of a nasopharyngeal swab (NPS) sample processed through traditional RNA extraction (TRE) and amplified with retrotranscription quantitative polymerase chain reaction (RT-qPCR). Multiple alternatives were developed to decrease time/cost of GSDP, including alternative clinical samples, RNA extraction methods and nucleic acid amplification. Thus, we carried out a cross comparison of various alternatives methods against GSDP and each other.

Methods

we tested alternative diagnostic methods using saliva, heat-induced RNA release (HIRR) and a colorimetric retrotranscription loop-mediated isothermal amplification (RT-LAMP) as substitutions to the GSDP.

Results

RT-LAMP using NPS processed by TRE showed high sensitivity (96%) and specificity (97%), closely matching GSDP. When saliva was processed by TRE and amplified with both RT-LAMP and RT-qPCR, RT-LAMP yielded high diagnostic parameters (88%-96% sensitivity and 95%-100% specificity) compared to RT-qPCR. Nonetheless, when saliva processed by TRE and detected by RT-LAMP was compared against the GSDP, the resulting diagnostic values for sensitivity (78%) and specificity (87%) were somewhat high but still short of those of the GSDP. Finally, saliva processed with HIRR and detected via RT-LAMP was the simplest and fastest method, but its sensitivity against GSDP was too low (56%) for any clinical application. Also, in this last method, the acidity of a large percentage of saliva samples (9%-22%) affected the pH-sensitive colorimetric indicator used in the test, requiring the exclusion of these acidic samples or an extra step for pH correction.

Discussion

our comparison shows that RT-LAMP technology has diagnostic performance on par with RT-qPCR; likewise, saliva offers the same diagnostic functionality as NPS when subjected to a TRE method. Nonetheless, use of direct saliva after a HIRR and detected with RT-LAMP does not produce an acceptable diagnostic performance.

Digital droplet RT-LAMP increases speed of SARS-CoV-2 viral RNA detection

Nucleic acid amplification testing (NAAT) remains one of the most reliable methods for pathogen identification. However, conventional bulk NAATs may not be sufficiently fast or sensitive enough for the detection of clinically-relevant pathogens in point-of-care testing. Here, we have developed a digital droplet RT-LAMP (ddRT-LAMP) assay that rapidly and quantitatively detects the SARS-CoV-2 viral E gene in microfluidic drops. Droplet partitioning using ddRT-LAMP significantly accelerates detection times across a wide range of template concentrations compared to bulk RT-LAMP assays. We discover that a reduction in droplet diameter decreases assay times up to a certain size, upon which surface adsorption of the RT-LAMP polymerase reduces reaction efficiency. Optimization of drop size and polymerase concentration enables rapid, sensitive, and quantitative detection of the SARS-CoV-2 E gene in only 8 min. These results highlight the potential of ddRT-LAMP assays as an excellent platform for quantitative point-of-care testing.

SARS-CoV-2 RT-LAMP in saliva: enhancing the results via a combination of cooling and specimen dilution procedure

Colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) is a potential and relatively simple rapid diagnostics method for COVID-19 detection. This study aims to evaluate and optimize the RT-LAMP performance on saliva specimens based on a commercially available kit.Modifications on an established protocol (Protocol A) were used, including Proteinase K supplementation (Protocol B); pre-treatment using nuclease-free water and proteinase K (Protocol C); Saliva cooling (Protocol D); saliva dilution after pre-treatment (Protocol E); lastly a combination of saliva cooling and dilution (Protocol F). Protocol performances were evaluated by comparing success rates (SR), diagnostic accuracy (DA), sensitivity, specificity, and predictive values. Additionally, a correlation between the Ct value by RT-qPCR and RT-LAMP performance was analyzed.. A total of 106 specimens were used in this study. Protocols B and C showed 100% unreadable results, therefore were paused. Protocol F showed the highest SR (87.65%) compared to other protocols, with a slight compromise to DA (81.69%), sensitivity (57.14%), specificity (97.67%), PPV (94.12%), and NPV (77.78%). In the sub-analysis of the low Ct value group (Ct < 30), Protocol F demonstrated a higher success rate (86.57%) compared to protocol A (64.18%); increased 3.08% sensitivity and 2.42% NPV; comparable DA; minor reduction in specificity (A = 100%; F = 97.67%) and PPV (A = 100%; F = 92.31%). A combination of saliva cooling-dilution substantially increased the tested kit's success rate, despite a slight decrease in specificity and PPV. Findings confirmed the saliva cooling-dilution procedure was beneficial to the test's SR, sensitivity, and NPV in the low Ct value group.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13337-024-00870-1.

Assessment of measurement accuracy of amplified DNA using a colorimetric loop-mediated isothermal amplification assay

A colorimetric loop-mediated isothermal amplification assay detects changes in pH during amplification based on color changes at a constant temperature. Currently, various studies have focused on developing and assessing molecular point-of-care testing instruments. In this study, we evaluated amplified DNA concentrations measured using the colorimetric LAMP assay of the 1POT™ Professional device (1drop Inc, Korea). Results of the 1POT analysis of clinical samples were compared with measurements obtained from the Qubit™ 4 and NanoDrop™ 2000 devices (both from Thermo Fisher Scientific, MA, USA). These results showed a correlation of 0.98 (95% CI: 0.96-0.99) and 0.96 (95% CI: 0.92-0.98) between 1POT and the Qubit and NanoDrop. 1POT can measure amplified DNA accurately and is suitable for on-site molecular diagnostics.

Neglected tropical disease (NTD) diagnostics: current development and operations to advance control

Neglected tropical diseases (NTDs) have become important public health threats that require multi-faceted control interventions. As late treatment and management of NTDs contribute significantly to the associated burdens, early diagnosis becomes an important component for surveillance and planning effective interventions. This review identifies common NTDs and highlights the progress in the development of diagnostics for these NTDs. Leveraging existing technologies to improve NTD diagnosis and improving current operational approaches for deployment of developed diagnostics are crucial to achieving the 2030 NTD elimination target. Point-of-care NTD (POC-NTD) diagnostic tools are recommended preferred diagnostic options in resource-constrained areas for mapping risk zones and monitoring treatment efficacy. However, few are currently available commercially. Technical training of remote health care workers on the use of POC-NTD diagnostics, and training of health workers on the psychosocial consequences of these diagnostics are critical in harnessing POC-NTD diagnostic potential. While the COVID-19 pandemic has challenged the possibility of achieving NTD elimination in 2030 due to the disruption of healthcare services and dwindling financial support for NTDs, the possible contribution of NTDs in exacerbating COVID-19 pandemic should motivate NTD health system strengthening.

UbiNAAT: a multiplexed point-of-care nucleic acid diagnostic platform for rapid at-home pathogen detection

The COVID-19 pandemic increased demands for respiratory disease testing to facilitate treatment and limit transmission, demonstrating in the process that most existing test options were too complex and expensive to perform in point-of-care or home scenarios. Lab-based molecular techniques can detect viral RNA in respiratory illnesses but are expensive and require trained personnel, while affordable antigen-based home tests lack sensitivity for early detection in newly infected or asymptomatic individuals. The few home RNA detection tests deployed were prohibitively expensive. Here, we demonstrate a point-of-care, paper-based rapid analysis device that simultaneously detects multiple viral RNAs; it is demonstrated on two common respiratory viruses (COVID-19 and influenza A) spiked onto a commercial nasal swab. The automated device requires no sample preparation by the user after insertion of the swab, minimizing user operation steps. We incorporated lyophilized amplification reagents immobilized in a porous matrix, a novel thermally actuated valve for multiplexed fluidic control, a printed circuit board that performs on-device lysis and amplification within a cell-phone-sized disposable device. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) products are visualized via fluorescent dyes using a modified cell phone, resulting in detection of as few as 104 viral copies per swab across both pathogens within 30 minutes. This integrated platform could be commercialized in a form that would be inexpensive, portable, and sensitive; it can readily be multiplexed to detect as many as 8 different RNA or DNA sequences, and adapted to any desired RNA or DNA detection assays.

Versatility of reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) from diagnosis of early pathological infection to mutation detection in organisms

Loop-mediated isothermal amplification (LAMP) is a rapid, state-of-the-art DNA amplification technology, used primarily for the quick diagnosis and early identification of microbial infection, caused by pathogens such as virus, bacteria and malaria. A target DNA can be amplified within 30 min using the LAMP reaction, taking place at a steady temperature. The LAMP method uses four or six primers to bind eight regions of a target DNA and has a very high specificity. The devices used for conducting LAMP are usually simple since the LAMP method is an isothermal process. When LAMP is coupled with Reverse Transcription (RT), it allows direct detection of RNA in a sample. This greatly enhances the efficiency of diagnosis of RNA viruses in a sample. Recently, the rampant spread of COVID-19 demanded such a rapid, simple, and cost-effective Point of Care Test (PoCT) for the accurate diagnosis of this pandemic. Loop-mediated isothermal amplification (LAMP) assays are not only used for the detection of microbial pathogens, but there are various other applications such as detection of genetic mutations in food and various organisms. In this review, various implementations of RT-LAMP techniques would be discussed.

Development of an integrated sample amplification control for salivary point-of-care pathogen testing

BACKGROUND

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

RESULTS

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 min without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

SIGNIFICANCE

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

Quantitative mRNA expression measurement at home

mRNA measurement is dominated by RT-PCR, which requires expensive laboratory equipment and personnel with advanced degrees. Loop-mediated isothermal amplification (LAMP) is a versatile technique for detecting target DNA and RNA. The sensitivity of LAMP in early reports has been below that of the standard RT-PCR tests. Here, we report the use of a fluorescence-based RT-LAMP protocol to measure CDX2 expression patterns, which match extremely well to the standards of sophisticated RT-PCR techniques (r = 0.99, p < 0.001). The assay works on diverse sample types such as cDNA, mRNA, and direct tissue sample testing in 25 min compared to more than 3 h for RT-PCR. We have developed a new protocol for designing RT-LAMP primers that reduce false positives due to self-amplification and improve quantification. A simple device with a 3D-printed box enables the measurement of mRNA expression at home, outdoors, and point-of-care setting.

Evaluation of colorimetric RT-LAMP for screening of SARS-CoV-2 in untreated wastewater

This study compared reverse transcription-loop-mediated isothermal amplification (RT-LAMP) and three reverse transcription-quantitative polymerase chain reaction (RT-qPCR) assays targeting the N and E genes of the SARS-CoV-2 genome for detecting RNA in untreated wastewater samples. RT-qPCR assays exhibited consistent amplification down to 2 × 102 GC/reaction, with greater analytical sensitivity at 2 × 101 GC/reaction by US CDC N1 and US CDC N2 assays. In contrast, RT-LAMP exhibited lower sensitivity, detecting SARS-CoV-2 only at or above 2 × 103 GC/reaction. For SARS-CoV-2 seeded wastewater samples, the US CDC N1 assay exhibited greater analytical sensitivity than the US CDC N2, E_Sarbeco, and RT-LAMP assays. Out of 30 wastewater samples, RT-qPCR detected endogenous SARS-CoV-2 RNA in 29 samples, while RT-LAMP identified 27 positive samples, with 20 displaying consistent amplifications in all three RT-LAMP technical replicates. Agreement analysis revealed a strong concordance between RT-LAMP and the US CDC N1 and E_Sarbeco RT-qPCR assays (κ = 0.474) but lower agreement with the US CDC N2 RT-qPCR assay (κ = 0.359). Quantification of SARS-CoV-2 RNA in positive samples revealed a strong correlation between the US CDC N1 and E_Sarbeco assays, while the US CDC N1 and US CDC N2 assays exhibited weak correlation. Logistic regression analysis indicated that RT-LAMP results correlated with RNA quantified by the US CDC N1 and E_Sarbeco assays, with 95 % limits of detection of 3.99 and 3.47 log10 GC/15 mL, respectively. In conclusion, despite lower sensitivity compared to RT-qPCR assays, RT-LAMP may offer advantages for wastewater surveillance, such as rapid results (estimated as twice as fast), and simplicity, making it a valuable tool in the shifting landscape of COVID-19 wastewater surveillance. Furthermore, LAMP positive wastewater samples might be prioritized for SARS-CoV-2 sequencing due to reduced analytical sensitivity. These findings support the use of RT-LAMP as a specific and efficient method for screening wastewater samples for SARS-CoV-2, particularly in resource-limited settings.

Phenol red as electrochemical indicator for highly sensitive quantification of SARS-CoV-2 by loop-mediated isothermal amplification detection

The current COVID-19 pandemic has made patent the need for rapid and cost-effective diagnostic tests, crucial for future infectious outbreaks. Loop-mediated isothermal amplification (LAMP) is a promising and decentralized alternative to qPCR. In this work we have developed a sensitive, fast, and simple innovative methodology for quantification of SARS-CoV-2 RNA copies, combining reverse-transcription LAMP with electrochemical detection. This is based on the oxidation of phenol red (PR), a visual and electroactive LAMP indicator, which oxidation peak potential (Ep) changes with the progress of the LAMP reaction. Using that Ep shift as analytical signal, a calibration curve was obtained for fragment N1 copies of SARS-CoV2 (which provided better results than N or S fragments), with a potential shift of 16.2 mV per order of magnitude, and a practical limit of detection of 21 copies·μL-1. Moreover, the precision of Ep is excellent (RSD < 2%): 557 ± 5 mV for negative and 602 ± 7 mV for positive (2148 N fragment RNA copies·µL-1·-1) LAMP controls. This methodology has been applied to the analysis of nasopharyngeal swab samples, resulting in total concordance with clinical RT-qPCR results. Advances towards fully decentralization have been achieved by designing and fabricating a small portable heater for isothermal procedures, obtaining comparable results to those from a commercial benchtop thermal cycler.

Faradaic Impedimetric Immunosensor for Label-Free Point-of-Care Detection of COVID-19 Antibodies Using Gold-Interdigitated Electrode Array

Label-free electrochemical biosensors have many desirable characteristics in terms of miniaturization, scalability, digitization, and other attributes associated with point-of-care (POC) applications. In the era of COVID-19 and pandemic preparedness, further development of such biosensors will be immensely beneficial for rapid testing and disease management. Label-free electrochemical biosensors often employ [Fe(CN)6]-3/4 redox probes to detect low-concentration target analytes as they dramatically enhance sensitivity. However, such Faradaic-based sensors are reported to experience baseline signal drift, which compromises the performance of these devices. Here, we describe the use of a mecaptohexanoic (MHA) self-assembled monolayer (SAM) modified Au-interdigitated electrode arrays (IDA) to investigate the origin of the baseline signal drift, developed a protocol to resolve the issue, and presented insights into the underlying mechanism on the working of label-free electrochemical biosensors. Using this protocol, we demonstrate the application of MHA SAM-modified Au-IDA for POC analysis of human serum samples. We describe the use of a label-free electrochemical biosensor based on covalently conjugated SARS-CoV-2 spike protein for POC detection of COVID-19 antibodies. The test requires a short incubation time (10 min), and has a sensitivity of 35.4/decade (35.4%/10 ng mL-1) and LOD of 21 ng/mL. Negligible cross reactivity to seasonal human coronavirus or other endogenous antibodies was observed. Our studies also show that Faradaic biosensors are ~17 times more sensitive than non-Faradaic biosensors. We believe the work presented here contributes to the fundamental understanding of the underlying mechanisms of baseline signal drift and will be applicable to future development of electrochemical biosensors for POC applications.

Development of an optimized RT-LAMP test for the detection of SARS-CoV-2

SARS-COV-2 is the causative agent of an acute respiratory syndrome called Coronavirus disease 2019 (COVID-19) with a varying mortality rate from 2019 to 2022. There are several measures for control and prevention of Covid-19 including using mask, vaccine injections, as well as screening the potential cases. We aimed to design and develop a molecular method (RT-LAMP) for detecting coronavirus in biological samples that is cheaper, faster and easier than conventional molecular methods. In this study, various reaction components were explored to make the optimal combination of an RT-LAMP master mix composition. The results revealed the ability of this RT-LAMP test in specifically identifying 100 copies of mixture of N and E genes in just 30-45 min. This study demonstrated the reliable performance of the RT-LAMP method for the detection of SARS-COV-2 in biological samples. Given the significant advantages of this method compared to the gold standard qRT-PCR, it can be employed as a promising tool for the diagnosis of coronavirus as well as other pathogenic viruses.

Changing the diagnostic paradigm for sugarcane: development of a mill-based diagnostic for ratoon stunting disease in crude cane juice

The availability of efficient diagnostic methods is crucial to monitor the incidence of crop diseases and implement effective management strategies. One of the most important elements in diagnostics, especially in large acreage crops, is the sampling strategy as hundreds of thousands of individual plants can grow in a single farm, making it difficult to assess disease incidence in field surveys. This problem is compounded when there are no external disease symptoms, as in the case for the ratoon stunting disease (RSD) in sugarcane. We have developed an alternative approach of disease surveillance by using the crude cane juice expressed at the sugar factory (mill). For this purpose, we optimized DNA extraction and amplification conditions for the bacterium Leifsonia xyli subsp xyli, the causal agent of RSD. The use of nucleic acid dipsticks and LAMP isothermal amplification allows to perform the assays at the mills, even in the absence of molecular biology laboratories. Our method has been validated using the qPCR industry standard and shows higher sensitivity. This approach circumvents sampling limitations, providing RSD incidence evaluation on commercial crops and facilitating disease mapping across growing regions. There is also potential is to extend the technology to other sugarcane diseases as well as other processed crops.

Development of an Integrated Sample Amplification Control for Salivary Point-of-Care Pathogen Testing

Background

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

Results

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 minutes without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

Significance

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

Evaluation of a smartphone-operated point-of-care device using loop-mediated isothermal amplification technology for rapid and remote detection of SARS-CoV-2

During the SARS-CoV-2 pandemic, rapid and sensitive detection of SARS-CoV-2 has been of high importance for outbreak control. Reverse transcriptase polymerase chain reaction (RT-PCR) is the current gold standard, however, the procedures require an equipped laboratory setting and personnel, which have been regularly overburdened during the pandemic. This often resulted in long waiting times for patients. In contrast, reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) is a simple, cost-efficient, and fast procedure, allowing for rapid and remote detection of SARS-CoV-2. In the current study, we performed a clinical evaluation of a new point-of-care test system based on LAMP-technology for SARS-CoV-2 detection, providing a result within 25 min (1copy™ COVID-19 MDx Kit Professional system). We tested 112 paired nasopharyngeal swabs, collected in the COVID-19 Ghent University Hospital test center, using the 1copy™ COVID-19 MDx Kit Professional system, and RT-PCR as the reference method. The test system was found to have a clinical sensitivity of 93.24% (69/74) (95% confidence interval [CI]: 84.93%-97.77%) and specificity of 97.37% (37/38) (95% CI: 86.19%-99.93%). Due to its easy smartphone operation and ready-to-use reagents, it ought to be easily applied in for instance general practices, pharmacies, nursing homes, schools, and companies. This would facilitate an efficient SARS-CoV-2 outbreak control and quarantine policy, as diagnosis can occur sooner in a near-patient setting.

Hepatitis A Virus and Hepatitis E Virus as Food- and Waterborne Pathogens-Transmission Routes and Methods for Detection in Food

Foodborne viruses are an important threat to food safety and public health. Globally, there are approximately 5 million cases of acute viral hepatitis due to hepatitis A virus (HAV) and hepatitis E virus (HEV) every year. HAV is responsible for numerous food-related viral outbreaks worldwide, while HEV is an emerging pathogen with a global health burden. The reported HEV cases in Europe have increased tenfold in the last 20 years due to its zoonotic transmission through the consumption of infected meat or meat products. HEV is considered the most common cause of acute viral hepatitis worldwide currently. This review focuses on the latest findings on the foodborne transmission routes of HAV and HEV and the methods for their detection in different food matrices.

Aptamer-Based Strategies to Address Challenges in COVID-19 Diagnosis and Treatments

Coronavirus disease (COVID-19), a highly contagious and rapidly spreading disease with significant fatality in the elderly population, has swept across the world since 2019. Since its first appearance, the causative agent, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has undergone multiple mutations, with Omicron as the predominant circulating variant of concern at the moment. The gold standard for diagnosis of COVID-19 by real-time polymerase chain reaction (RT-PCR) to detect the virus is laborious and requires well-trained personnel to perform sophisticated procedures. Also, the genetic variants of SARS-CoV-2 that arise regularly could result in false-negative detection. Meanwhile, the current COVID-19 treatments such as conventional medicine, complementary and alternative medicine, passive antibody therapy, and respiratory therapy are associated with adverse effects. Thus, there is an urgent need to discover novel diagnostic and therapeutic approaches against SARS-CoV-2 and its variants. Over the past 30 years, nucleic acid-based aptamers have gained increasing attention and serve as a promising alternative to the antibodies in the diagnostic and therapeutic fields with their uniqueness of being small, nonimmunogenicity, and thermally stable. Aptamer targeting the SARS-CoV-2 structural proteins or the host receptor proteins represent a powerful tool to control COVID-19 infection. In this review, challenges faced by currently available diagnostic and therapeutic tools for COVID-19 are underscored, along with how aptamers can shed a light on the current COVID-19 pandemic, focusing on the critical factors affecting the discovery of high-affinity aptamers and their potential applications to control COVID-19 infection.

Proof-of-Concept: Smartphone- and Cloud-Based Artificial Intelligence Quantitative Analysis System (SCAISY) for SARS-CoV-2-Specific IgG Antibody Lateral Flow Assays

Smartphone-based point-of-care testing (POCT) is rapidly emerging as an alternative to traditional screening and laboratory testing, particularly in resource-limited settings. In this proof-of-concept study, we present a smartphone- and cloud-based artificial intelligence quantitative analysis system (SCAISY) for relative quantification of SARS-CoV-2-specific IgG antibody lateral flow assays that enables rapid evaluation (<60 s) of test strips. By capturing an image with a smartphone camera, SCAISY quantitatively analyzes antibody levels and provides results to the user. We analyzed changes in antibody levels over time in more than 248 individuals, including vaccine type, number of doses, and infection status, with a standard deviation of less than 10%. We also tracked antibody levels in six participants before and after SARS-CoV-2 infection. Finally, we examined the effects of lighting conditions, camera angle, and smartphone type to ensure consistency and reproducibility. We found that images acquired between 45° and 90° provided accurate results with a small standard deviation and that all illumination conditions provided essentially identical results within the standard deviation. A statistically significant correlation was observed (Spearman correlation coefficient: 0.59, p = 0.008; Pearson correlation coefficient: 0.56, p = 0.012) between the OD450 values of the enzyme-linked immunosorbent assay and the antibody levels obtained by SCAISY. This study suggests that SCAISY is a simple and powerful tool for real-time public health surveillance, enabling the acceleration of quantifying SARS-CoV-2-specific antibodies generated by either vaccination or infection and tracking of personal immunity levels.

Comparative Clinical Evaluation of a Novel FluA/FluB/SARS-CoV-2 Multiplex LAMP and Commercial FluA/FluB/SARS-CoV-2/RSV RT-qPCR Assays

Influenza and coronaviruses cause highly contagious respiratory diseases that cause millions of deaths worldwide. Public health measures implemented during the current coronavirus disease (COVID-19) pandemic have gradually reduced influenza circulation worldwide. As COVID-19 measures have relaxed, it is necessary to monitor and control seasonal influenza during this COVID-19 pandemic. In particular, the development of rapid and accurate diagnostic methods for influenza and COVID-19 is of paramount importance because both diseases have significant public health and economic impacts. To address this, we developed a multi-loop-mediated isothermal amplification (LAMP) kit capable of simultaneously detecting influenza A/B and SARS-CoV-2. The kit was optimized by testing various ratios of primer sets for influenza A/B (FluA/FluB) and SARS-CoV-2 and internal control (IC). The FluA/FluB/SARS-CoV-2 multiplex LAMP assay showed 100% specificity for uninfected clinical samples and sensitivities of 90.6%, 86.89%, and 98.96% for LAMP kits against influenza A, influenza B, and SARS-CoV-2 clinical samples, respectively. Finally, the attribute agreement analysis for clinical tests indicated substantial agreement between the multiplex FluA/FluB/SARS-CoV-2/IC LAMP and commercial Allplex^TM SARS-CoV-2/FluA/FluB/RSV assays.

Vivid COVID-19 LAMP is an ultrasensitive, quadruplexed test using LNA-modified primers and a zinc ion and 5-Br-PAPS colorimetric detection system

Sensitive and rapid point-of-care assays have been crucial in the global response to SARS-CoV-2. Loop-mediated isothermal amplification (LAMP) has emerged as an important diagnostic tool given its simplicity and minimal equipment requirements, although limitations exist regarding sensitivity and the methods used to detect reaction products. We describe the development of Vivid COVID-19 LAMP, which leverages a metallochromic detection system utilizing zinc ions and a zinc sensor, 5-Br-PAPS, to circumvent the limitations of classic detection systems dependent on pH indicators or magnesium chelators. We make important strides in improving RT-LAMP sensitivity by establishing principles for using LNA-modified LAMP primers, multiplexing, and conducting extensive optimizations of reaction parameters. To enable point-of-care testing, we introduce a rapid sample inactivation procedure without RNA extraction that is compatible with self-collected, non-invasive gargle samples. Our quadruplexed assay (targeting E, N, ORF1a, and RdRP) reliably detects 1 RNA copy/µl of sample (=8 copies/reaction) from extracted RNA and 2 RNA copies/µl of sample (=16 copies/reaction) directly from gargle samples, making it one of the most sensitive RT-LAMP tests and even comparable to RT-qPCR. Additionally, we demonstrate a self-contained, mobile version of our assay in a variety of high-throughput field testing scenarios on nearly 9,000 crude gargle samples. Vivid COVID-19 LAMP can be an important asset for the endemic phase of COVID-19 as well as preparing for future pandemics.

Identify the Virus-like Models for COVID-19 as Bio-Threats: Combining Phage Display, Spectral Detection and Algorithms Analysis

The rapid identification and recognition of COVID-19 have been challenging since its outbreak. Multiple methods were developed to realize fast monitoring early to prevent and control the pandemic. In addition, it is difficult and unrealistic to apply the actual virus to study and research because of the highly infectious and pathogenic SARS-CoV-2. In this study, the virus-like models were designed and produced to replace the original virus as bio-threats. Three-dimensional excitation-emission matrix fluorescence and Raman spectroscopy were employed for differentiation and recognition among the produced bio-threats and other viruses, proteins, and bacteria. Combined with PCA and LDA analysis, the identification of the models for SARS-CoV-2 was achieved, reaching a correction of 88.9% and 96.3% after cross-validation, respectively. This idea might provide a possible pattern for detecting and controlling SARS-CoV-2 from the perspective of combining optics and algorithms, which could be applied in the early-warning system against COVID-19 or other bio-threats in the future.

RT-LAMP Multicenter Study for SARS-CoV-2 Genome Molecular Detection in Brazilian Swab and Saliva Samples

Reverse transcription loop-mediated isothermal amplification (RT-LAMP) is a rapid method that can replace RT-qPCR. A simple molecular assay for SARS-CoV-2 RNA detection in gold-standard diagnosis through swabs and alternative specimens such as saliva could be helpful in promoting genomic surveillance. A multicenter study was conducted to evaluate the RT-LAMP assay method as an alternative for the molecular detection of SARS-CoV-2 lineages in swab and saliva samples. A total of 350 swabs from individuals with (n = 276) or without (n = 74) COVID-19 tested by RT-qPCR were collected. Paired saliva was also collected from 90 individuals who had SARS-CoV-2 RNA that was detectable (n = 30) or undetectable (n = 60) via RT-qPCR. For the RT-LAMP methodology, six primers were used for ORF1 gene amplification. As for SARS-CoV-2 genotyping, 39 swabs had the whole genome sequenced by MinION. The sensitivity of RT-LAMP to the swab was 90.2%. For the swab samples with Ct ≤ 30, the sensitivity improved by 96%. Considering saliva with Ct ≤ 30 in RT-qPCR testing, the RT-LAMP sensitivity was 100%. The RT-LAMP specificity was 100% for both the swab and saliva samples. This RT-LAMP assay was capable of detecting all the SARS-CoV-2 lineages circulating in the Brazilian swab samples. The RT-LAMP method has significant potential for use in clinical routines since it was capable of detecting SARS-CoV-2 RNA in swab and saliva samples.

Use of LoopDeelab during the COVID-19 Pandemic: An Innovative Device for Field Diagnosis

Rapid and accurate diagnosis of SARS-CoV-2 infection is essential for the management of the COVID-19 outbreak. RT-LAMP LoopDeetect COVID-19 (LoopDeescience, France) is a rapid molecular diagnostic tool which operates with the LoopDeelab (LoopDeescience, France) device. RAPID COVID is a prospective double-blind research protocol which was conducted to evaluate the concordance between Loopdeetect COVID-19 and RT-PCR Allplex 2019 n-Cov (Seegene, Korea). Between 11 May 2020 and 14 June 2021, a total of 1122 nasopharyngeal swab specimens were collected, of which 741 were finally analysed. There were 32 “positive” and “indeterminate” RT-PCR results. The intrinsic performances of Loopdeetect COVID-19 are equivalent to other commercial RT-LAMP PCR COVID-19 kits, with a sensitivity and specificity of 69.23% [CI 95%: 48.21–85.67] and 100% [CI 95%: 99.58–100.00], respectively. To the best of our knowledge, LoopDeelab is the only LAMP PCR diagnostic device allowing such a fast and reliable analysis with low-cost equipment; this makes it a new and innovative technology, designed for field use. This device being portable, the development of other detection kits will be useful for the management of epidemics with a high attack rate and would facilitate the rapid application of health measures.

Development of Colorimetric Reverse Transcription Loop-Mediated Isothermal Amplification Assay for Detecting Feline Coronavirus

Simple Summary

Feline coronavirus infecting domestic cats can cause feline infectious peritonitis (FIP), a fatal infectious disease. Several relevant clinical diagnoses and molecular methods are complicated and often ambiguous for veterinarians. In this work developed a rapid, sensitive, specific, and easy-to-visualize colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay with a novel LAMP primer set that has high specificity was developed using neutral red as an indicator dye. This proposed procedure could reliably detect FCoV RNA from effusion fluids comparable to the conventional PCR method. Considering these advantages, the RT-LAMP developed here has great potential on FIP-associated FCoV surveillance. Together with other sophisticated molecular diagnostic tools, this method can further be exploited in clinical laboratories to inspect suspected cats with effusive FIP.

Abstract

Feline infectious peritonitis (FIP) is a worldwide fatal disease caused by a mutant feline coronavirus (FCoV). Simple and efficient molecular detection methods are needed. Here, sensitive, specific, rapid, and reliable colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) was developed to detect the ORF1a/1b gene of FCoV from cats with suspected FIP using neutral red as an indicator. Novel LAMP primers were specifically designed based on the gene of interest. The isothermal assay could visually detect FCoV at 58 °C for 50 min. The RT-LAMP assay was highly specific and had no cross-reactivity with other related feline viruses. The detection limit of FCoV detection by RT-LAMP was 20 fg/µL. A blind clinical test (n = 81) of the developed RT-LAMP procedure was in good agreement with the conventional PCR method. In the light of its performance specificity, sensitivity, and easy visualization, this neutral-red-based RT-LAMP approach would be a fruitful alternative molecular diagnostic tool for veterinary inspection of FCoV when combined with nucleotide sequencing or specific PCR to affirm the highly virulent FIP-associated FCoV.

Electromagnetically-driven integrated microfluidic platform using reverse transcription loop-mediated isothermal amplification for detection of severe acute respiratory syndrome coronavirus 2

Rapid, sensitive and accurate diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is of great need for effective quarantining and treatment. Real-time reverse-transcription polymerase chain reaction requiring thermocyling has been commonly used for diagnosis of SARS-CoV-2 though it may take two to 4 h before lengthy sample pretreatment process and require bulky apparatus and well-trained personnel. Since multiple reverse transcription loop-mediated isothermal amplification (multiple RT-LAMP) process without thermocycling is sensitive, specific and fast, an electromagnetically-driven microfluidic chip (EMC) was developed herein to lyse SARS-CoV-2 viruses, extract their RNAs, and perform qualitative analysis of three marker genes by on-chip multiple RT-LAMP in an automatic format within 82 min at a limit of detection of only ∼5000 copies per reaction (i.e. 200 virus/ μL). This compact EMC may be especially promising for SARS-CoV-2 diagnostics in resource-limited countries.

Aerosol-jet-printed graphene electrochemical immunosensors for rapid and label-free detection of SARS-CoV-2 in saliva

Rapid, inexpensive, and easy-to-use coronavirus disease 2019 (COVID-19) home tests are key tools in addition to vaccines in the world-wide fight to eliminate national and local shutdowns. However, currently available tests for SARS-CoV-2, the virus that causes COVID-19, are too expensive, painful, and irritating, or not sufficiently sensitive for routine, accurate home testing. Herein, we employ custom-formulated graphene inks and aerosol jet printing (AJP) to create a rapid electrochemical immunosensor for direct detection of SARS-CoV-2 Spike Receptor-Binding Domain (RBD) in saliva samples acquired non-invasively. This sensor demonstrated limits of detection that are considerably lower than most commercial SARS-CoV-2 antigen tests (22.91 ± 4.72 pg/mL for Spike RBD and 110.38 ± 9.00 pg/mL for Spike S1) as well as fast response time (~30 mins), which was facilitated by the functionalization of printed graphene electrodes in a single-step with SARS-CoV-2 polyclonal antibody through the carbodiimide reaction without the need for nanoparticle functionalization or secondary antibody or metallic nanoparticle labels. This immunosensor presents a wide linear sensing range from 1 to 1000 ng/mL and does not react with other coexisting influenza viruses such as H1N1 hemagglutinin. By combining high-yield graphene ink synthesis, automated printing, high antigen selectivity, and rapid testing capability, this work offers a promising alternative to current SARS-CoV-2 antigen tests.

Validation of a colorimetric LAMP to detect Loxosceles experimental envenomation

Diagnostic tests for brown spider accidents are unavailable and impact treatment decisions, increasing costs and patient risks. In this work, we used for the first time a fast, simple, and visual method based on the loop-mediated isothermal amplification assay (LAMP) to detect Loxosceles envenomation. Using the DNA from L. similis legs, we observed a high sensitivity using this test since as low as 0.32 pg of DNA could be detected. This pH-dependent colorimetric assay was 64 times more sensitive than PCR to detect spider DNA. The test was specific for Loxosceles once no cross-reaction was observed when testing DNA from different agents that cause similar dermonecrotic injuries. The test allowed the detection of Loxosceles intermedia DNA from hair, serum, and exudate samples obtained from experimentally-envenomed rabbit within 72 h. The method sensitivity varied according to the sample and the collection time, reaching 100% sensitivity in serum and hair, respectively, 1 h and 24 h after the experimental envenomation. Due to its ease of execution, speed, sensitivity, and specificity, LAMP presents an excellent potential for identifying Loxosceles spp. Envenomation. This can reduce the burden on the Health System and the morbidity for the patient by implementing the appropriate therapy immediately.In addition, this work opens up the perspective to other venomous animal accident identification using LAMP.

RT-LAMP assay combining multi-fluorescent probes for SARS-CoV-2 RNA detection and variant differentiation

Simple and accurate testing tools for SARS-CoV-2 viral RNA detection are essential for the prevention of the spread of the virus and timely governmental actions. Herein, we present a reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay for the simultaneous detection of ORF1ab and N gene fragments of SARS-CoV-2 in one pot. Using two primer sets and two molecular beacon (MB) probes respectively labelled with different fluorophore, positive results were obtained with a limit of detection of 20 and 2 copies/μL for ORF1ab and N gene fragments, respectively. Moreover, the RT-LAMP based assay was applied to detect single-site differences in S genes using two one-step displacement (OSD) probes targeting wild-type and mutant (P681R mutation was chosen as model) genes. Through that, the wild type strain and P681R mutant variant were well distinguished from each other, and a preliminary observation was also made on other mutations at this site such as P681H. The proposed method has high sensitivity for quantification and high specificity for mutation differentiation. In addition, it does not require accurate sophisticated thermal cycler instrumentation and can be used in clinical settings in resource-limited regions.

Rational Primer and Probe Construction in PCR-Based Assays for the Efficient Diagnosis of Drifting Variants of SARS-CoV-2

The genome sequence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been evolving via genomic drifts resulting in "emerging/drifting variants" circulating worldwide. The construction of polymerase chain reaction (PCR) assays for the reliable, efficient, and specific diagnosis of the drifting variants of SARS-CoV-2 is specifically governed by the selection and construction of primers and probes. The efficiency of molecular diagnosis is impacted by the identity/homology of the genome sequence of SARS-CoV-2 with other coronaviruses, drifting variants or variants of concern (VOCs) circulating in communities, inherent capacity of mutation(s) of various target genes of SARS-CoV-2, and concentration of genes of interest in host cells. The precise amplicon selection and construction of primers and probes for PCR-based assays can efficiently discriminate specific SARS-CoV-2 drifting variants. The construction of single nucleotide polymorphism (SNP)-specific primers and probes for PCR assays is pivotal to specifically distinguish SARS-CoV-2 variants present in the communities and contributes to better diagnosis and prevention of the ongoing COVID-19 pandemic. In this study, we have utilized in silico-based bioinformatic tools where the alignment for genes, the positions and types of SNPs/mutations of VOCs, and the relative number of SNPs per nucleotide in different genomic regions were investigated. Optimal and specific genome region (amplicon) selection with comparatively lower mutability in the SARS-CoV-2 genome should be prioritized to design/construct PCR assays for reliable and consistent diagnosis in various regions of the world for a longer duration of time. Further, the rational selection of target genes that is at an optimal detectable concentration in biological samples can bolster PCR assays of high analytical sensitivity. Hence, the construction of primers and probes with the rational selection of targeting specific E gene, genomic regions with highly conserved sequences, multiple target genes with relatively lower mutability and detectable level of concentration, SNP-specific binding regions of spike (S gene) protein, and shorter amplicon size (100-150 bp) are vital for the PCR assays to achieve optimal efficiency in the point-of-care laboratory diagnosis of circulating drifting variants of SARS-CoV-2 with optimal accuracy.

Rapid identification of SARS-CoV-2 in the point-of-care using digital PCR-based Dr. PCR™ Di20K COVID-19 Detection Kit without viral RNA extraction

BACKGROUND

Since COVID-19 was declared the pandemic by the WHO, it has continued to spread. There is a need for rapid, efficient, and accurate diagnostic kits and techniques to control its spread.

OBJECTIVE

The diagnostic capability of the qRT-PCR-based Real-Q 2019-nCoV Detection Kit and dPCR-based Dr. PCR™ Di20K COVID-19 Detection Kit was compared and evaluated.

METHODS

Diagnostic tests for COVID-19 were performed using two different COVID-19 kits and 301 individual specimens with confirmed COVID-19 positive/negative at the government-accredited medical institution. Assessment of diagnostic capability was measured through diagnostic sensitivity, specificity, Cohen's Kappa coefficient, and dilutional linearity tests.

RESULTS

The COVID-19 diagnostic test results using two kits and 301 individual specimens perfectly matched the pre-diagnosis results of the medical institution. In addition, the measurement results of diagnostic sensitivity and specificity were "1", indicating high diagnostic capability. Cohen's Kappa coefficient value is "1", which means that the diagnosis concordance between the two kits is "Almost Perfect". As a result of dilutional linearity tests to evaluate their detection capability, both kits were measured with very high detection reliability.

CONCLUSION

Here, we propose that the dPCR-based Dr. PCR™ Di20K COVID-19 Detection Kit has the advantages of the dPCR method reported in the previous study and is suitable for point-of-care testing (POCT) by overcoming the limitations of space, test time, cross-over contamination, and biosafety due to omitting RNA extraction process.

Validation of a rapid, saliva-based, and ultra-sensitive SARS-CoV-2 screening system for pandemic-scale infection surveillance

Without any realistic prospect of comprehensive global vaccine coverage and lasting immunity, control of pandemics such as COVID-19 will require implementation of large-scale, rapid identification and isolation of infectious individuals to limit further transmission. Here, we describe an automated, high-throughput integrated screening platform, incorporating saliva-based loop-mediated isothermal amplification (LAMP) technology, that is designed for population-scale sensitive detection of infectious carriers of SARS-CoV-2 RNA. Central to this surveillance system is the "Sentinel" testing instrument, which is capable of reporting results within 25 min of saliva sample collection with a throughput of up to 3840 results per hour. It incorporates continuous flow loading of samples at random intervals to cost-effectively adjust for fluctuations in testing demand. Independent validation of our saliva-based RT-LAMP technology on an automated LAMP instrument coined the "Sentinel", found 98.7% sensitivity, 97.6% specificity, and 98% accuracy against a RT-PCR comparator assay, confirming its suitability for surveillance screening. This Sentinel surveillance system offers a feasible and scalable approach to complement vaccination, to curb the spread of COVID-19 variants, and control future pandemics to save lives.

Microfluidic point-of-care device for detection of early strains and B.1.1.7 variant of SARS-CoV-2 virus

Since the beginning of the COVID-19 pandemic, several mutations of the SARS-CoV-2 virus have emerged. Current gold standard detection methods for detecting the virus and its variants are based on PCR-based diagnostics using complex laboratory protocols and time-consuming steps, such as RNA isolation and purification, and thermal cycling. These steps limit the translation of technology to the point-of-care and limit accessibility to under-resourced regions. While PCR-based assays currently offer the possibility of multiplexed gene detection, and commercial products of single gene PCR and isothermal LAMP at point-of-care are also now available, reports of isothermal assays at the point-of-care with detection of multiple genes are lacking. Here, we present a microfluidic assay and device to detect and differentiate the Alpha variant (B.1.1.7) from the SARS-CoV-2 virus early strains in saliva samples. The detection assay, which is based on isothermal RT-LAMP amplification, takes advantage of the S-gene target failure (SGTF) to differentiate the Alpha variant from the SARS-CoV-2 virus early strains using a binary detection system based on spatial separation of the primers specific to the N- and S-genes. We use additively manufactured plastic cartridges in a low-cost optical reader system to successfully detect the SARS-CoV-2 virus from saliva samples (positive amplification is detected with concentration ≥10 copies per μL) within 30 min. We demonstrate that our platform can discriminate the B.1.1.7 variant (USA/CA_CDC_5574/2020 isolate) from SARS-CoV-2 negative samples, but also from the SARS-CoV-2 USA-WA1/2020 isolate. The reliability of the developed point-of-care device was confirmed by testing 38 clinical saliva samples, including 20 samples positive for Alpha variant (sensitivity > 90%, specificity = 100%). This study highlights the current relevance of binary-based testing, as the new Omicron variant also exhibits S-gene target failure and could be tested by adapting the approach presented here.

Direct RT-qPCR Assay for the Detection of SARS-CoV-2 in Saliva Samples

Since mid-2020 there have been complexities and difficulties in the standardisation and administration of nasopharyngeal swabs. Coupled with the variable and/or poor accuracy of lateral flow devices, this has led to increased societal 'testing fatigue' and reduced confidence in test results. Consequently, asymptomatic individuals have developed reluctance towards repeat testing, which remains the best way to monitor COVID-19 cases in the wider population. On the other hand, saliva-based PCR, a non-invasive, highly sensitive, and accurate test suitable for everyone, is gaining momentum as a straightforward and reliable means of detecting SARS-CoV-2 in symptomatic and asymptomatic individuals. Here, we provide an itemised list of the equipment and reagents involved in the process of sample submission, inactivation and analysis, as well as a detailed description of how each of these steps is performed.

An internet of things-based point-of-care device for direct reverse-transcription-loop mediated isothermal amplification to identify SARS-CoV-2

Rapid and accurate testing tools for SARS-CoV-2 detection are urgently needed to prevent the spreading of the virus and to take timely governmental actions. Internet of things (IoT)-based diagnostic devices would be an ideal platform for point-of-care (POC) screening of COVID-19 and ubiquitous healthcare monitoring for patients. Herein, we present an advanced IoT-based POC device for real-time direct reverse-transcription-loop mediated isothermal amplification assay to detect SARS-CoV-2. The diagnostic system is miniaturized (10 cm [height] × 9 cm [width] × 5.5 cm [length]) and lightweight (320 g), which can be operated with a portable battery and a smartphone. Once a liquid sample was loaded into an integrated microfluidic chip, a series of sample lysis, nucleic amplification, and real-time monitoring of the fluorescent signals of amplicons were automatically performed. Four reaction chambers were patterned on the chip, targeting As1e, N, E genes and a negative control, so multiple genes of SARS-CoV-2 could be simultaneously analyzed. The fluorescence intensities in each chamber were measured by a CMOS camera upon excitation with a 488 nm LED light source. The recorded data were processed by a microprocessor inside the IoT-based POC device and transferred and displayed on the wirelessly connected smartphone in real-time. The positive results could be obtained using three primer sets of SARS-CoV-2 with a limit of detection of 2 × 10¹ genome copies/μL, and the clinical sample of SARS-CoV-2 was successfully analyzed with high sensitivity and accuracy. Our platform could provide an advanced molecular diagnostic tool to test SARS-CoV-2 anytime and anywhere.

Performance of colorimetric RT-LAMP as a diagnostic tool for SARS-CoV-2 infection during the fourth wave of COVID-19 in Thailand

Background

COVID-19, which is caused by SARS-CoV-2 and its variants, poses an ongoing global threat, particularly in low-immunization coverage regions. Thus, rapid, accurate, and easy-to-perform diagnostic methods are in urgent demand to halt the spread of the virus.

Objectives

We aimed to validate the clinical performance of the FastProof 30 min-TTR SARS-CoV-2 reverse transcription loop-mediated isothermal amplification (RT-LAMP) method using leftover RNA samples extracted from 315 nasopharyngeal swabs. The sensitivity and specificity of RT-LAMP were determined in comparison with reverse transcriptase–polymerase chain reaction (RT-PCR).

Results

Of 315 nasopharyngeal swabs, viral RNA was detected in 154 samples (48.9%) by RT-PCR assay. Compared with RT-PCR, overall sensitivity and specificity of RT-LAMP were 81.82% (95% CI: 74.81–87.57) and 100% (95% CI: 97.73–100), respectively. A 100% positivity rate was achieved in samples with cycle threshold (Ct) <31 for RT-PCR targeting the ORF1ab gene. However, samples with Ct >31 accounted for false-negative results by RT-LAMP in 28 samples.

Conclusions

RT-LAMP reliably detected viral RNA with high sensitivity and specificity and has potential application for mass screening of patients with acute COVID-19 infection when viral load is high.

A paper-based colorimetric molecular test for SARS-CoV-2 in saliva

Herein, we describe the development of a paper-based device to detect nucleic acids of pathogens of interest in complex samples using loop-mediated isothermal amplification (LAMP) by producing a colorimetric response visible to the human eye. To demonstrate the utility of this device in emerging public health emergencies, we developed and optimized our device to detect SARS-CoV-2 in human saliva without preprocessing. The resulting device was capable of detecting the virus within 60 min and had an analytical sensitivity of 97% and a specificity of 100% with a limit of detection of 200 genomic copies/μL of patient saliva using image analysis. The device consists of a configurable number of reaction zones constructed of Grade 222 chromatography paper separated by 20 mil polystyrene spacers attached to a Melinex® backing via an ARclean® double-sided adhesive. The resulting device is easily configurable to detect multiple targets and has the potential to detect a variety of pathogens simply by changing the LAMP primer sets.

Optimization and Clinical Validation of Colorimetric Reverse Transcription Loop-Mediated Isothermal Amplification, a Fast, Highly Sensitive and Specific COVID-19 Molecular Diagnostic Tool That Is Robust to Detect SARS-CoV-2 Variants of Concern

The coronavirus disease 2019 (COVID-19) pandemic unfolded due to the widespread severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission reinforced the urgent need for affordable molecular diagnostic alternative methods for massive testing screening. We present the clinical validation of a pH-dependent colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) for SARS-CoV-2 detection. The method revealed a limit of detection of 19.3 ± 2.7 viral genomic copies/μL when using RNA extracted samples obtained from nasopharyngeal swabs collected in guanidine-containing viral transport medium. Typical RT-LAMP reactions were performed at 65°C for 30 min. When compared to reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR), up to cycle-threshold (Ct) value 32, RT-LAMP presented 98% [95% confidence interval (CI) = 95.3-99.5%] sensitivity and 100% (95% CI = 94.5-100%) specificity for SARS-CoV-2 RNA detection targeting E and N genes. No cross-reactivity was detected when testing other non-SARS-CoV virus, confirming high specificity. The test is compatible with primary RNA extraction-free samples. We also demonstrated that colorimetric RT-LAMP can detect SARS-CoV-2 variants of concern and variants of interest, such as variants occurring in Brazil named gamma (P.1), zeta (P.2), delta (B.1.617.2), B.1.1.374, and B.1.1.371. The method meets point-of-care requirements and can be deployed in the field for high-throughput COVID-19 testing campaigns, especially in countries where COVID-19 testing efforts are far from ideal to tackle the pandemics. Although RT-qPCR is considered the gold standard for SARS-CoV-2 RNA detection, it requires expensive equipment, infrastructure, and highly trained personnel. In contrast, RT-LAMP emerges as an affordable, inexpensive, and simple alternative for SARS-CoV-2 molecular detection that can be applied to massive COVID-19 testing campaigns and save lives.

Rapid, Cheap, and Effective COVID-19 Diagnostics for Africa

BACKGROUND

Although comprehensive public health measures such as mass quarantine have been taken internationally, this has generally been ineffective, leading to a high infection and mortality rate. Despite the fact that the COVID-19 pandemic has been downgraded to epidemic status in many countries, the real number of infections is unknown, particularly in low-income countries. However, precision shielding is used in COVID-19 management, and requires estimates of mass infection in key groups. As a result, rapid tests for the virus could be a useful screening tool for asymptomatic virus shedders who are about to come into contact with sensitive groups. In Africa and other low- and middle-income countries there is high rate of COVID-19 under-diagnosis, due to the high cost of molecular assays. Exploring alternate assays to the reverse transcriptase polymerase chain reaction (RT-PCR) for COVID-19 diagnosis is highly warranted.

AIM

This review explored the feasibility of using alternate molecular, rapid antigen, and serological diagnostic assays to accurately and precisely diagnose COVID-19 in African populations, and to mitigate severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RT-PCR diagnostic challenges in Africa.

METHOD

We reviewed publications from internet sources and searched for appropriate documents available in English. This included Medline, Google Scholar, and Ajol. We included primary literature and some review articles that presented knowledge on the current trends on SARS-CoV-2 diagnostics in Africa and globally.

RESULTS

Based on our analysis, we highlight the utility of four different alternatives to RT-PCR. These include two isothermal nucleic acid amplification assays (loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA)), rapid antigen testing, and antibody testing for tackling difficulties posed by SARS-CoV-2 RT-PCR testing in Africa.

CONCLUSION

The economic burden associated COVID-19 mass testing by RT-PCR will be difficult for low-income nations to meet. We provide evidence for the utility and deployment of these alternate testing methods in Africa and other LMICs.

Portable Tools for COVID-19 Point-of-Care Detection: A Review

Recently, several methods for SARS-CoV-2 detection have been developed to obtain rapid, portable, cheap, and easy-to-use diagnostic tools. This review paper summarizes and discusses studies on the development of point-of-care devices for SARS-CoV-2 diagnosis with comparisons between them from several aspects. Various detection methods of the recently developed portable COVID-19 biosensor will be presented in this review. The discussion is divided into four major classifications based on the target biomarkers of SARS-CoV-2, such as antibodies, nucleic acids, antigens, and metabolic products. An overview of the potential development for future study is also provided. Moreover, basic knowledge of biosensors is also explained for tutoring the implementation of theory into the research of COVID-19 biosensors. This review paper is aimed to provide a tutorial by collecting the information on the development of a point-of-care device for SARS-CoV-2 detection to provide information for further research and propose the new COVID-19 portable diagnostic tool.

Micro/nanotechnology-inspired rapid diagnosis of respiratory infectious diseases

Humans have suffered from a variety of infectious diseases since a long time ago, and now a new infectious disease called COVID-19 is prevalent worldwide. The ongoing COVID-19 pandemic has led to research of the effective methods of diagnosing respiratory infectious diseases, which are important to reduce infection rate and help the spread of diseases be controlled. The onset of COVID-19 has led to the further development of existing diagnostic methods such as polymerase chain reaction, reverse transcription polymerase chain reaction, and loop-mediated isothermal amplification. Furthermore, this has contributed to the further development of micro/nanotechnology-based diagnostic methods, which have advantages of high-throughput testing, effectiveness in terms of cost and space, and portability compared to conventional diagnosis methods. Micro/nanotechnology-based diagnostic methods can be largely classified into (1) nanomaterials-based, (2) micromaterials-based, and (3) micro/nanodevice-based. This review paper describes how micro/nanotechnologies have been exploited to diagnose respiratory infectious diseases in each section. The research and development of micro/nanotechnology-based diagnostics should be further explored and advanced as new infectious diseases continue to emerge. Only a handful of micro/nanotechnology-based diagnostic methods has been commercialized so far and there still are opportunities to explore.

Development, evaluation of the PNA RT-LAMP assay for rapid molecular detection of SARS-CoV-2

Dual-labeled PNA probe used RT-LAMP molecular rapid assay targeting SARS-CoV-2 ORF1ab and N genes was developed, and the analytical, clinical performances for detection of SARS-CoV-2 RNA extracted from clinical nasopharyngeal swab specimens were evaluated in this study. Data showed that this assay is highly specific for SARS-CoV-2, and the absolute detection limit is 1 genomic copy per microliter of viral RNA which can be considered to be comparable to gold-standard molecular diagnostic method real-time reverse transcriptase PCR. Both clinical sensitivity and specificity against a commercial real-time RT-PCR assay were determined as identical. In conclusion, the PNA RT-LAMP assay showed high analytical and clinical accuracy which are identical to real-time RT-PCR which has been routinely used for the detection of SARS-CoV-2.

Diagnostic evaluation of qRT-PCR-based kit and dPCR-based kit for COVID-19

Background

Coronavirus disease of 2019 (COVID-19) is well known as a fatal disease, first discovered at Wuhan in China, ranging from mild to death, such as shortness of breath and fever. Early diagnosis of COVID-19 is a crucial point in preventing global prevalence.

Objective

We aimed to evaluate the diagnostic competency and efficiency with the Allplex™ 2019-nCoV Assay kit and the Dr. PCR 20 K COVID-19 Detection kit, designed based on the qRT-PCR and dPCR technologies, respectively.

Methods

A total of 30 negative and 20 COVID-19 positive specimens were assigned to the diagnostic test by using different COVID-19 diagnosis kits. Diagnostic accuracy was measured by statistical testing with sensitivity, specificity, and co-efficiency calculations.

Results

Comparing both diagnostic kits, we confirmed that the diagnostic results of 30 negative and 20 positive cases were the same pre-diagnostic results. The diagnostic statistics test results were perfectly matched with value (1). Cohen’s Kappa coefficient was demonstrated that the given kits in two different ways were “almost perfect” with value (1). In evaluating the detection capability, the dilutional linearity experiments substantiate that the Dr. PCR 20 K COVID-19 Detection kit could detect SARS-CoV-2 viral load at a concentration ten times lower than that of the Allplex™ 2019-nCoV Assay kit.

Conclusions

In this study, we propose that the dPCR diagnosis using LOAA dPCR could be a powerful method for COVID-19 point-of-care tests requiring immediate diagnosis in a limited time and space through the advantages of relatively low sample concentration and small equipment size compared to conventional qRT-PCR.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13258-021-01162-4.

Current diagnostic approaches to detect two important betacoronaviruses: Middle East respiratory syndrome coronavirus (MERS-CoV) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)

Middle East respiratory syndrome coronavirus (MERS-CoV) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are two common betacoronaviruses, which are still causing transmission among the human population worldwide. The major difference between the two coronaviruses is that MERS-CoV is now causing sporadic transmission worldwide, whereas SARS-CoV-2 is causing a pandemic outbreak globally. Currently, different guidelines and reports have highlighted several diagnostic methods and approaches which could be used to screen and confirm MERS-CoV and SARS-CoV-2 infections. These methods include clinical evaluation, laboratory diagnosis (nucleic acid-based test, protein-based test, or viral culture), and radiological diagnosis. With the presence of these different diagnostic approaches, it could cause a dilemma to the clinicians and diagnostic laboratories in selecting the best diagnostic strategies to confirm MERS-CoV and SARS-CoV-2 infections. Therefore, this review aims to provide an up-to-date comparison of the advantages and limitations of different diagnostic approaches in detecting MERS-CoV and SARS-CoV-2 infections. This review could provide insights for clinicians and scientists in detecting MERS-CoV and SARS-CoV-2 infections to help combat the transmission of these coronaviruses.

Dual-target one-step nested PCR for sensitive detection of SARS-CoV-2 nucleic acids

The Corona Virus Disease reported in 2019 (COVID-19) poses a significant threat to human and public health. Its early and accurate detection can reduce the spread and recurrence of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Real-time reverse transcription fluorescent quantitative polymerase chain reaction (RT-qPCR) is the "gold standard" for detecting the nucleic acid of SARS-CoV-2. This study developed and tested a dual-target (ORF1ab and N gene) one-step nested RT-qPCR (DTO-N-PCR) to detect SARS-CoV-2. Ten-fold serial dilutions of mixed synthetic DNA from SARS-CoV-2 ORF1ab and N gene were used as templates to test the sensitivity of DTO-N-PCR. Its specificity was subsequently tested using throat swab specimens from 10 COVID-19 patients and 35 healthy participants. DTO-N-PCR was more sensitive and specific than conventional RT-qPCR. It has unique features, including a dual-target (ORF1ab and N gene), rapid one-step operation of reverse transcription and PCR, four pairs of inner and outer primers, and specific probes. These features aid in its rapid, accurate, and efficient detection of SARS-CoV-2 RNA.