An overview and analysis of site remediation technologies

Surfactant foam injection for remediation of diesel-contaminated soil: A comprehensive study on the role of co-surfactant in foaming formulation enhancement

Aqueous foam injection is a promising technique for in-situ remediation of soil and aquifers contaminated by petroleum products. However, the application efficiency is strongly hindered by foam's instability upon contact with hydrocarbons. Addressing this, we propose a new binary surfactant mixture of Sodium Dodecyl Sulfate (SDS) and Cocamidopropyl Hydroxysultaine (CAHS). This study investigates CAHS's role as a co-surfactant in enhancing foam stability against antifoaming diesel oil under static and dynamic conditions. Using a dynamic foam analyzer (DFA-100), we assessed static foam's stability by monitoring decay profiles and bubble growth over time. The results revealed that the highest stability can be reached at a CAHS to SDS ratio of 50:50, increasing the half-life of the foam by 7.7 times. Remarkably, our analyses at bulk and bubble scales also elucidated the mechanisms behind the enhanced foam stability of the proposed binary surfactant mixture in the absence and presence of diesel. Additionally, in a 1D sand column, the SDS-CAHS mixture demonstrated more than twofold improvement of the Resistance Factor, attributed to the better survival of the lamellae due to the reduced rate of their destruction. This formulation also yielded a recovery improvement of >10 % compared to SDS foam. The significant improvements in stability and performance of the SDS-CAHS (50:50) mixture were credited to a robust pseudo-emulsion film formation, creating a higher oil entry barrier. This reinforcement and the surfactant molecules' synergistic interactions at the gas-liquid-oil interface significantly contributed to the overall effectiveness.

Peptides Used for Heavy Metal Remediation: A Promising Approach

In recent years, heavy metal pollution has become increasingly prominent, severely damaging ecosystems and biodiversity, and posing a serious threat to human health. However, the results of current methods for heavy metal restoration are not satisfactory, so it is urgent to find a new and effective method. Peptides are the units that make up proteins, with small molecular weights and strong biological activities. They can effectively repair proteins by forming complexes, reducing heavy metal ions, activating the plant's antioxidant defense system, and promoting the growth and metabolism of microorganisms. Peptides show great potential for the remediation of heavy metal contamination due to their special structure and properties. This paper reviews the research progress in recent years on the use of peptides to remediate heavy metal pollution, describes the mechanisms and applications of remediation, and provides references for the remediation of heavy metal pollution.

Remediation of soils contaminated with total petroleum hydrocarbons through soil washing with surfactant solutions

Soil fulfils vital functions for life on Earth and so, just like water and air, its protection from all sources of contamination is a major concern. However, the extensive use of petroleum derived products, either as energy sources or as commodities, leads to important environmental liabilities. Ex situ soil washing is a technology to concentrate contaminants, allowing soil cleaning and the reuse of extracted petroleum derived products. This work focuses on the optimization of ex situ soil washing process using surfactants, introducing an evaluation of the washing solution recycling and its after use safe disposal, promoting the reduction of raw materials, energy and water resources costs. Two surfactants, sodium dodecyl sulphate (SDS) and polyoxyethylene sorbitan monooleate (Tween 80), were tested in the decontamination of an artificially contaminated soil with engine lubricant oil waste. The optimization of the washing conditions, such as stirring speed, liquid-solid ratio, number of washing stages, and surfactant concentration, was carried out using a design of experiments (DOE) software, so that the maximum extraction efficiency of total petroleum hydrocarbons (TPHs) was achieved. A TPH removal efficiency of (80.7 ± 3.2)% was obtained with Tween 80 after 5 h of washing and (90.7 ± 2.8)% with SDS after 2 h at 200 rpm on an orbital shaker with a liquid to solid ratio (L/S) of 15. The potential for reuse of the washing solutions was evaluated. Finally, the discharge of the washing solution was considered using activated carbon to remove the surfactants and ensure its safe disposal.

Updating risk remediation-endpoints for petroleum-contaminated soils? A case study in the Ecuadorian Amazon region

In Ecuador, the regulatory framework for the remediation of petroleum-contaminated soils is based on predefined concentration endpoints for a selected range of petroleum hydrocarbon compounds. However, such approach may lead to over or under-estimation of the environmental risk posed by contaminated soils. In this study, the end-point remediation criteria according to Ecuadorian Environmental legislation were evaluated using different approaches. The first one was based on Total Extractable Petroleum Hydrocarbons (TEPH) and the second one on Total Bioavailable Petroleum Hydrocarbons (TBPH). Both were compared with ecotoxicological determinations using EC50 -Microtox® bioassay at 5 and 15 min of exposure. The correlation (R2) between EC50 values vs TEPH was of 0.2 and 0.25 for 5 and 15 min, respectively. Meanwhile, R2 between EC50 and TBPH was of 0.9 and 0.65 for 5 and 15 min, respectively, demonstrating a stronger correlation. Our results suggest that a contaminated site where the concentration of the TEPH is higher than the relevant regulatory concentrations may be deemed to present an acceptable risk even though their concentrations exceed the target values in soils. The results also challenge the notion that hormesis is associated with TEPH, contrary to some literature. This study is the first in Ecuador to propose incorporating bioavailability into environmental regulations, highlighting the need for further research to establish realistic and achievable remediation goals based on toxicity studies involving various trophic levels.

In-situ thermal conductive heating (TCH) for soil remediation: A review

This paper provides a comprehensive overview of research works on in-situ thermal conductive heating (TCH), including heat transfer in soil, desorption behavior of pollutants, and mass transfer mechanism within the site. Each stage influences the effectiveness of subsequent stages. Comparison of simulation and experimental results demonstrates that heat transfer and temperature rise in soil are related to the hydrogeological conditions, wells layout and pollutants contents. Thermal desorption of pollutants from soil particles can be influenced by four aspects: energy input, pollutant properties, soil characteristics, and the binding state of pollutant in soil. The exponential decay kinetic model exhibits better applicability for fitting thermal desorption processes. After desorption, the pollutants migrate in soil driven by high temperature and extraction pressure, while hydrogeological conditions of the site determine the actual migration path and rate. Applying convection-dispersion model allows for quantitatively describing the complex migration behavior of pollutants in heterogeneous sites. Future research should focus more on the composite effects of multiple factors in TCH and develop multi-field coupling models through the combination of numerical simulation and in-situ experiments. Accurate characterization and prediction of entire TCH process can improve remediation efficiency, reduce energy costs, and achieve sustainable low-carbon remediation.

The effect of the synergistic thermal treatment and stabilization on the transformation and transportation of arsenic, chromium, and cadmium in soil

Thermal treatments commonly used to remedy organic-contaminated soils can inadvertently impact the behavior of non-targeted pollutants, notably heavy metal(loid)s in soil. This study introduces an integrated calcination-stabilization remediation strategy employing steel slag as a stabilizing agent, with a focus on elucidating the transformations and remobilization tendencies of As, Cr, and Cd. Thermal treatment alters the mobility of these elements by modifying soil properties, with pH and redox conditions playing pivotal roles. After anaerobic calcination, the leaching concentrations of As reached 163 μg L-1, far surpassed 7.57 μg L-1 after the aerobic calcination. Although Cr and As share oxygen-containing anion forms, they display opposing leaching tendencies after thermal treatment. At 400 °C, Cr leaching from aerobically treated soil reaches 64.5 mg L-1, dropping to 6.63 mg L-1 after anaerobic heating due to pH-induced Cr(OH)3 formation. Thermal treatment significantly amplifies the leaching of Cd cations. In contrast to the leaching concentration of 122 μg L-1 in the untreated soil, aerobic and anaerobic heating (400 °C) resulted in leaching concentrations of 896 μg L-1 and 132 μg L-1, respectively. Noteworthy, the integrated treatment (400 °C anaerobically) decreases leached As and Cd concentrations to 68.3 μg L-1 and 15.4 μg L-1, attributed to stabilizer alkalinity and porosity. Column leaching shows initial rapid release followed by continuous behavior for As and Cd, with the average leaching concentrations of the remediated soil decreasing to 60.5 μg L-1 and 1.32 μg L-1, ensuring safe backfilling. In conclusion, this study contributes to the understanding of the mobility and stabilization of heavy metal(loid)s subsequent to the integrated calcination-stabilization process.

Draft Genome of Nocardia canadensis sp. nov. Isolated from Petroleum-Hydrocarbon-Contaminated Soil

The bacterial strain WB46 was isolated from the rhizosphere of willow plants (Salix purpurea L.) growing in soil contaminated with petroleum hydrocarbons. The strain was subjected to whole-genome shotgun sequencing using Illumina HiSeq. Its draft genome is 7.15 Mb, with a 69.55% GC content, containing 6387 protein-coding genes and 51 tRNA and 15 rRNA sequences. The quality and reliability of the genome were assessed using CheckM, attaining an estimated genome completeness of 98.75% and an estimated contamination of 1.68%. These results indicate a high-quality genome (>95%) and low contamination (<5%). Many of these genes are responsible for petroleum hydrocarbon degradation, such as alkane 1-monooxygenase (alkB) and naphthalene dioxygenase (ndo). 16S rRNA gene analysis, including in silico DNA-DNA hybridization (DDH) and average nucleotide identity (ANI), showed that strain WB46 belongs to the genus Nocardia, and the most closely related species is Nocardia asteroides. The strain WB46 showed a distance of 63.4% and sequence identity of 88.63%, respectively. These values fall below the threshold levels of 70% and 95%, respectively, suggesting that the strain WB46 is a new species. We propose the name of Nocardia canadensis sp. nov. for this new species. Interestingly, the sequence divergence of the 16S rRNA gene showed that the divergence only occurred in the V2 region. Therefore, the conventional V3-V4, V5-V7, or V8-V9 targeting metabarcoding, among others, would not be able to assess the diversity related to this new species.

Dual Benefits of Hydrogel Remediation of Cadmium-Contaminated Water or Soil and Promotion of Vegetable Growth under Cadmium Stress

This study aims to solve the problem of cadmium heavy metal ion pollution caused by the abuse of chemical fertilizers and activities such as mining, which pose a serious threat to the plant growth environment. We successfully synthesized DMAPAA (N-(3-(Dimethyl amino) propyl) acrylamide)/DMAPAAQ (N, N-Dimethyl amino propyl acrylamide, methyl chloride quaternary) hydrogels via free radical polymerization. Subsequently, we conducted experiments on this hydrogel for growing vegetables under cadmium stress conditions in aqueous solutions and soil. The cadmium capture capacity of DMAPAA/DMAPAAQ hydrogels under different cadmium ion concentrations and pH values was evaluated by using inductively coupled plasma optical emission spectrometry (ICP). The research results show that under the condition of pH = 7.3, the cadmium capture capacity of DMAPAA/DMAPAAQ hydrogels is the greatest. We used the Langmuir model to fit the adsorption data, and the correlation coefficient was as high as 0.96, indicating that the model fits well. The application of the hydrogels promoted the growth of vegetables in soil under cadmium stress conditions. The results showed that when the added amount of hydrogel was 4%, the dry weight of the vegetables was the largest. In addition, when the added amount of cadmium was 500 mg/kg and the added amount of hydrogel was 4%, the absorption of cadmium by the vegetables decreased to an undetectable level. In summary, the hydrogel successfully synthesized in this study can be effectively used to immobilize cadmium ions in soil while positively promoting the growth and yield of vegetables. This achievement has practical significance for solving the problem of heavy metal ion pollution.

Integrating artificial intelligence, machine learning, and deep learning approaches into remediation of contaminated sites: A review

The growing number of contaminated sites across the world pose a considerable threat to the environment and human health. Remediating such sites is a cumbersome process with the complexity originating from the need for extensive sampling and testing during site characterization. Selection and design of remediation technology is further complicated by the uncertainties surrounding contaminant attributes, concentration, as well as soil and groundwater properties, which influence the remediation efficiency. Additionally, challenges emerge in identifying contamination sources and monitoring the affected area. Often, these problems are overly simplified, and the data gathered is underutilized rendering the remediation process inefficient. The potential of artificial intelligence (AI), machine-learning (ML), and deep-learning (DL) to address these issues is noteworthy, as their emergence revolutionized the process of data management/analysis. Researchers across the world are increasingly leveraging AI/ML/DL to address remediation challenges. Current study aims to perform a comprehensive literature review on the integration of AI/ML/DL tools into contaminated site remediation. A brief introduction to various emerging and existing AI/ML/DL technologies is presented, followed by a comprehensive literature review. In essence, ML/DL based predictive models can facilitate a thorough understanding of contamination patterns, reducing the need for extensive soil and groundwater sampling. Additionally, AI/ML/DL algorithms can play a pivotal role in identifying optimal remediation strategies by analyzing historical data, simulating scenarios through surrogate models, parameter-optimization using nature inspired algorithms, and enhancing decision-making with AI-based tools. Overall, with supportive measures like open-data policies and data integration, AI/ML/DL possess the potential to revolutionize the practice of contaminated site remediation.

Exploring the origins and cleanup of mercury contamination: a comprehensive review

Mercury is a global pollutant that poses significant risks to human health and the environment. Natural sources of mercury include volcanic eruptions, while anthropogenic sources include industrial processes, artisanal and small-scale gold mining, and fossil fuel combustion. Contamination can arise through various pathways, such as atmospheric deposition, water and soil contamination, bioaccumulation, and biomagnification in food chains. Various remediation strategies, including phytoremediation, bioremediation, chemical oxidation/reduction, and adsorption, have been developed to address mercury pollution, including physical, chemical, and biological approaches. The effectiveness of remediation techniques depends on the nature and extent of contamination and site-specific conditions. This review discusses the challenges associated with mercury pollution and remediation, including the need for effective monitoring and management strategies. Overall, this review offers a comprehensive understanding of mercury contamination and the range of remediation techniques available to mitigate its adverse impacts.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Phycoremediation of crude oil polluted water from selected water sources in Ogoniland, Rivers State, Nigeria

Crude oil exploitation in the Niger Delta, particularly in Ogoniland, brought environmental devastation occasioned by petroleum pollution, as farmlands and water sources were destroyed. This study was designed to remediate crude oil contaminated water obtained from water sources in Ogoniland using two green algal species. Thirty water samples were collected from eight different water sources. The samples were analysed for total petroleum hydrocarbon (TPH) using gas chromatography/flame ionization detector (GC/FID). Algal samples were collected from Ogba River and at wetland in Military Hospital Benin, Edo State, Nigeria. The algal samples were identified, screened, optimized and grown in Bold basal medium. Results obtained from the determination of TPH showed that the infiltrated pond (Exc) sample site had the highest concentration among all the sites sampled with 198.8329 μg/L, R2 with 134.1296 μg/L, R1 with 108.9394 μg/L, R3 with 105.8011 μg/L, R4 with 98.442 8 μg/L, the hand-dug wells (Wll) had 9.6586 μg/L while the borehole (Bhl) had the lowest with 1.8310 μg/L. It was deduced that pollution of water sources was principally because of pollutants washed from the soil environment into the open surface water sources via run-off rather than through the seepage from the underground aquifers, incriminating illegal oil mining and artisanal refining. Results obtained from the analysis of algal growth medium indicated that the two algal species were able to absorb the hydrocarbon contaminants, albeit at different rates, corresponding with the algal growth rate. Analysis of algal biomass after 4 weeks of remediation showed that from the initial 10.27 μg/20 mL added to the growth medium, the highest TPH mean value of 0.490 μg/20 mL was extracted from Ulothrix zonata (F.Weber & Mohr) Kützing biomass grown in Exc compared to 0.344 μg/20 mL of TPH extracted from Chlorella sorokiniana Shihira & R.W.Krauss grown in the same sample site. Also, Ulothrix zonata had higher TPH yield 0.023 μg/20 mL in Bhl compared to Chlorella sorokiniana 0.021 μg/20 mL of TPH from the same water source. This result indicated Ulothrix zonata had superior TPH phycoremediation ability to Chlorella sorokiniana. While the present study calls for deployment of the algal species for field trial, it is strongly recommended that crude oil pollution should be discouraged.

Comparison of pesticide adsorption efficiencies of zeolites and zeolite-carbon composites and their regeneration possibilities

The presence of pesticides in our environment is a consequence of intensive industrial and civilizational development, necessitating the search for effective and safe methods to remove them. We suggest utilizing zeolite X and a zeolite-carbon composite, obtained through the chemical transformation of fly ash, as pesticide sorbents. To increase the sorption efficiency of 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxyacetic acid (MCPA), carbendazim, and simazine, we functionalized the zeolite materials with cationic (hexadecyltrimethylammonium) and nonionic (Triton X-100) surfactants. We used transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric/differential thermal analysis (TG/DTA) and point of zero charge (pHpzc) analysis to characterize the functionalized sorbent materials. Our results indicate that cationic surfactants significantly enhance the adsorption of 2,4-D and MCPA. In contrast, carbendazim and simazine exhibit maximum sorption on the unmodified zeolite-carbon composite. The sorption mechanism is intricate, with physical sorption predominating, primarily due to electrostatic interactions between the protonated binding sites of the adsorbents and the negatively charged pesticide molecules. Regeneration tests demonstrated that ethanol is the most effective in regenerating zeolite-carbon composite with adsorbed MCPA and 2,4-D, while thermal regeneration was not possible. Adsorbents with simazine and carbendazim can be regenerated using both thermal and ethanol methods, but the thermal regeneration of zeolite with adsorbed simazine is more efficient. Utilizing functionalized zeolite materials obtained from industrial waste, such as fly ash, could provide an efficient way to remove pesticides from the environment.

Unlocking secrets of microbial ecotoxicology: recent achievements and future challenges

Environmental pollution is one of the main challenges faced by humanity. By their ubiquity and vast range of metabolic capabilities, microorganisms are affected by pollution with consequences on their host organisms and on the functioning of their environment. They also play key roles in the fate of pollutants through the degradation, transformation, and transfer of organic or inorganic compounds. Thus, they are crucial for the development of nature-based solutions to reduce pollution and of bio-based solutions for environmental risk assessment of chemicals. At the intersection between microbial ecology, toxicology, and biogeochemistry, microbial ecotoxicology is a fast-expanding research area aiming to decipher the interactions between pollutants and microorganisms. This perspective paper gives an overview of the main research challenges identified by the Ecotoxicomic network within the emerging One Health framework and in the light of ongoing interest in biological approaches to environmental remediation and of the current state of the art in microbial ecology. We highlight prevailing knowledge gaps and pitfalls in exploring complex interactions among microorganisms and their environment in the context of chemical pollution and pinpoint areas of research where future efforts are needed.

Biochar applications for treating potentially toxic elements (PTEs) contaminated soils and water: a review

Environmental pollution with potentially toxic elements (PTEs) has become one of the critical and pressing issues worldwide. Although these pollutants occur naturally in the environment, their concentrations are continuously increasing, probably as a consequence of anthropic activities. They are very toxic even at very low concentrations and hence cause undesirable ecological impacts. Thus, the cleanup of polluted soils and water has become an obligation to ensure the safe handling of the available natural resources. Several remediation technologies can be followed to attain successful remediation, i.e., chemical, physical, and biological procedures; yet many of these techniques are expensive and/or may have negative impacts on the surroundings. Recycling agricultural wastes still represents the most promising economical, safe, and successful approach to achieving a healthy and sustainable environment. Briefly, biochar acts as an efficient biosorbent for many PTEs in soils and waters. Furthermore, biochar can considerably reduce concentrations of herbicides in solutions. This review article explains the main reasons for the increasing levels of potentially toxic elements in the environment and their negative impacts on the ecosystem. Moreover, it briefly describes the advantages and disadvantages of using conventional methods for soil and water remediation then clarifies the reasons for using biochar in the clean-up practice of polluted soils and waters, either solely or in combination with other methods such as phytoremediation and soil washing technologies to attain more efficient remediation protocols for the removal of some PTEs, e.g., Cr and As from soils and water.

Zero-valent iron based materials selection for permeable reactive barrier using machine learning

The zero-valent iron (ZVI) based reactive materials are potential remediation reagents in permeable reactive barriers (PRB). Considering that reactive materials is the essential to determining the long-term stability of PRB and the emergence of a large number of new iron-based materials. Here, we present a new approach using machine learning to screen PRB reactive materials, which proposes to improve the efficiency and practicality of selection of ZVI-based materials. To compensate for the insufficient amount of existing machine learning source data and the real-world implementation, machine learning combines evaluation index (EI) and reactive material experimental evaluations. XGboost model is applied to estimate the kinetic data and SHAP is used to improve the accuracy of model. Batch and column tests were conducted to investigate the geochemical characteristics of groundwater. The study find that specific surface area is a fundamental factor correlated with the kinetic constants of ZVI-based materials, according to SHAP analysis. Reclassifying the data with specific surface area significantly improved prediction accuracy (reducing RMSE from 1.84 to 0.6). Experimental evaluation results showed that ZVI had 3.2 times higher anaerobic corrosion reaction kinetic constants and 3.8 times lower selectivity than AC-ZVI. Mechanistic studies revealed the transformation pathways and endpoint products of iron compounds. Overall, this study is a successful initial attempt to use machine learning for selecting reactive materials.

Reduction of bioavailability and phytotoxicity effect of cadmium in soil by microbial-induced carbonate precipitation using metabolites of ureolytic bacterium Ochrobactrum sp. POC9

The application of ureolytic bacteria for bioremediation of soil contaminated with heavy metals, including cadmium (Cd), allows for the efficient immobilization of heavy metals by precipitation or coprecipitation with carbonates. Microbially-induced carbonate precipitation process may be useful also in the case of the cultivation of crop plants in various agricultural soils with trace but legally permissible Cd concentrations, which may be still uptaken by plants. This study aimed to investigate the influence of soil supplementation with metabolites containing carbonates (MCC) produced by the ureolytic bacterium Ochrobactrum sp. POC9 on the Cd mobility in the soil as well as on the Cd uptake efficiency and general condition of crop plants (Petroselinum crispum). In the frame of the conducted studies (i) carbonate productivity of the POC9 strain, (ii) the efficiency of Cd immobilization in soil supplemented with MCC, (iii) crystallization of cadmium carbonate in the soil enriched with MCC, (iv) the effect of MCC on the physico-chemical and microbiological properties of soil, and (v) the effect of changes in soil properties on the morphology, growth rate, and Cd-uptake efficiency of crop plants were investigated. The experiments were conducted in soil contaminated with a low concentration of Cd to simulate the natural environmental conditions. Soil supplementation with MCC significantly reduced the bioavailability of Cd in soil with regard to control variants by about 27-65% (depending on the volume of MCC) and reduced the Cd uptake by plants by about 86% and 74% in shoots and roots, respectively. Furthermore, due to the decrease in soil toxicity and improvement of soil nutrition with other metabolites produced during the urea degradation (MCC), some microbiological properties of soil (quantity and activity of soil microorganisms), as well as the general condition of plants, were also significantly improved. Soil supplementation with MCC enabled efficient Cd stabilization and significantly reduced its toxicity for soil microbiota and plants. Thus, MCC produced by POC9 strain may be used not only as an effective Cd immobilizer in soil but also as a microbe and plant stimulators.

Mechanochemical remediation of fluoranthene contaminated soil and biotoxicity evaluation

A mechanochemical (MC) method was employed for the remediation of soil contaminated with fluoranthene (C₁₆H₁₀, FL) a four-ringed polycyclic aromatic hydrocarbon (PAH) containing three benzene rings and a central five-membered heterocyclic ring, with the effects of soil inorganic components, milling conditions, and the degradation mechanism investigated. Results showed that the addition of SiO₂ and kaolin to soil resulted in a greater increase in the effectiveness of FL removal than other inorganic additives. After 3 hours of milling at 500 rpm, the FL removal rate from SiO₂ containing soil, reached 99.26%, with the removal efficiency increasing in accordance with an increase in milling duration and speed. The milled samples were characterized by FT-IR, Raman spectroscopy, and GC-MS analysis, revealing the mechanism of FL degradation, including destruction of the aromatic skeleton structure and the formation of amorphous carbon and graphite. The MC remediation method was applied to FL contaminated soil, showing that FL was efficiently degraded in soil without any soil additives, resulting in a significant reduction in the biotoxicity of the remediated soil. The organic matter, moisture content and pH of the actual soil changed slightly after mechanical ball milling. Thus, the MC method has high potential in the remediation of PAH-contaminated soils.HIGHLIGHTSA mechanochemical (MC) method for the degradation of fluoranthene was assessed.The use of silica and kaolin as soil additives enhances fluoranthene remediation.Fluoranthene can be efficiently removed from contaminated soil by milling alone.The degradation mechanism was skeleton structure destruction and carbonization.The biotoxicity of soil was significantly reduced by milling.

Meta-analysis of metal nanoparticles degrading pesticides: what parameters are relevant?

The rise in the global population demands an increasing food supply and methods to boost agricultural production. Pesticides are necessary for agricultural production models, avoiding losses of close to 40%. Nevertheless, the extensive use of pesticides can cause their accumulation in the environment, causing problems for human health, biota, and ecosystems. Thus, new technologies have emerged to remove these wastes efficiently. In recent years, metal and metal oxide nanoparticles (MNPs) have been reported as promising catalysts to degrade pesticides; however, a systematic understanding of their effect on pesticide degradation is still required. Therefore, this study focused on a meta-analysis of articles available in Elsevier's Scopus and Thomas Reuters Web of Science, found by searching for "nanoparticle pesticide" and "pesticide contamination." After passing different filters, the meta-analysis was performed with 408 observations from 94 reviews, which comprise insecticides, herbicides, and fungicides, including organophosphates, organochlorines, carbamates, triazines, and neonicotinoids. Herein, 14 different MNPs (Ag, Ni, Pd, Co₃O₄, BiOBr, Au, ZnO, Fe, TiO₂, Cu, WO₃, ZnS, SnO₂, and Fe⁰), improved pesticide degradation, with the highest degradation rates achieved by Ag (85%) and Ni (82.5%). Additionally, the impact of the MNP functionalization, size, and concentration on pesticide degradation was quantified and compared. In general, the degradation rate increased when the MNPs were functionalized (~ 70%) compared to naked (~ 49%). Also, the particle size significantly affected the degradation of pesticides. To our knowledge, this study is the first meta-analysis performed about the impact of MNPs on pesticide degradation, providing an essential scientific basis for future studies.

Removal of mixed contaminants from landfill leachate-contaminated soil by flushing with bio-surfactant: laboratory column tests

Landfill leachate-contaminated soil is widespread all over the world. In order to study the removal of mixed contaminants from landfill leachate-contaminated soil by flushing with bio-surfactant, soil column test was conducted to select an optimum concentration of bio-surfactant saponin (SAP) at first. Then, the removal efficiencies of organic contaminants, ammonia nitrogen, and heavy metals from landfill leachate-contaminated soil by flushing with SAP were studied. At last, the toxicity of contaminated soil before and after flushing was estimated by sequential extraction of heavy metals and plant growth test. The test results showed that the SAP solution with the concentration of 2.5 CMC could effectively remove the mixed contaminants from soil and would not introduce excessive pollutants of SAP in soil. Specifically, the removal efficiencies of organic contaminant and ammonia nitrogen were 47.01% and 90.42%, respectively. And the removal efficiencies of Cu, Zn, and Cd were 29.42%, 22.55%, and 17.68%, respectively. During flushing, hydrophobic organic compounds as well as physisorption and ion-exchange ammonia nitrogen in soil were removed by the solubilization effect of SAP, and heavy metals were removed by the chelation of SAP. After flushing with SAP, the reduced partition index (I_R) value of Cu and Cd increased, and the mobility index (M_F) value of Cu decreased. In addition, flushing with SAP reduced the plant toxicity of contaminated soil, and the residual SAP in soil promoted the plant growth. Therefore, flushing with SAP offered great potentials in remediating the landfill leachate-contaminated soil.

Immobilizing lead and copper in aqueous solution using microbial- and enzyme-induced carbonate precipitation

Inappropriate irrigation could trigger migration of heavy metals into surrounding environments, causing their accumulation and a serious threat to human central nervous system. Traditional site remediation technologies are criticized because they are time-consuming and featured with high risk of secondary pollution. In the past few years, the microbial-induced carbonate precipitation (MICP) is considered as an alternative to traditional technologies due to its easy maneuverability. The enzyme-induced carbonate precipitate (EICP) has attracted attention because bacterial cultivation is not required prior to catalyzing urea hydrolysis. This study compared the performance of lead (Pb) and copper (Cu) remediation using MICP and EICP respectively. The effect of the degree of urea hydrolysis, mass and species of carbonate precipitation, and chemical and thermodynamic properties of carbonates on the remediation efficiency was investigated. Results indicated that ammonium ion (NH4+) concentration reduced with the increase in lead ion (Pb2+) or copper ion (Cu2+) concentration, and for a given Pb2+ or Cu2+ concentration, it was much higher under MICP than EICP. Further, the remediation efficiency against Cu2+ is approximately zero, which is way below that against Pb2+ (approximately 100%). The Cu2+ toxicity denatured and even inactivated the urease, reducing the degree of urea hydrolysis and the remediation efficiency. Moreover, the reduction in the remediation efficiency against Pb2+ and Cu2+ appeared to be due to the precipitations of cotunnite and atacamite respectively. Their chemical and thermodynamic properties were not as good as calcite, cerussite, phosgenite, and malachite. The findings shed light on the underlying mechanism affecting the remediation efficiency against Pb2+ and Cu2+.

Status of Ecosystem Services in Abandoned Mining Areas in the Iberian Peninsula: Management Proposal

An abandoned sphalerite mining area in the southwest (SW) of the Iberian Peninsula was studied to evaluate the impact that the presence of metal(loid)s has on soil and ecosystem health. Five zones were delimited: sludge, dump, scrubland, riparian zone, and dehesa. Critical total levels of lead (Pb), zinc (Zn), thallium (Tl), and chromium (Cr), well above the limit indicative of toxicity problems, were found in the areas close to the sources of contamination. Pb-Zn concentrations were very high in the riparian zone, reaching values of 5875 mg/kg Pb and 4570 mg/kg Zn. The whole area is classifiable as extremely contaminated with Tl, with concentrations above 370 mg/kg in the scrubland. Cr accumulation mainly occurred in areas away from the dump, with levels up to 240 mg/kg in the dehesa. In the study area, several plants were found growing luxuriantly despite the contamination. The measured metal(loid)s content is the cause of a significant decrease in ecosystem services, resulting in unsafe soils for food and water production, so the implementation of a decontamination program is advisable. The plant species Retama sphaerocarpa, present in the sludge, scrubland, riparian zone, and dehesa, is postulated as suitable for use in phytoremediation.

Beyond Cleansing: Ecosystem Services Related to Phytoremediation

Phytotechnologies used for cleaning up urban and suburban polluted soils (i.e., brownfields) have shown some weakness in the excessive extent of the timeframe required for them to be effectively operating. This bottleneck is due to technical constraints, mainly related to both the nature of the pollutant itself (e.g., low bio-availability, high recalcitrance, etc.) and the plant (e.g., low pollution tolerance, low pollutant uptake rates, etc.). Despite the great efforts made in the last few decades to overcome these limitations, the technology is in many cases barely competitive compared with conventional remediation techniques. Here, we propose a new outlook on phytoremediation, where the main goal of decontaminating should be re-evaluated, considering additional ecosystem services (ESs) related to the establishment of a new vegetation cover on the site. The aim of this review is to raise awareness and stress the knowledge gap on the importance of ES associated with this technique, which can make phytoremediation a valuable tool to boost an actual green transition process in planning urban green spaces, thereby offering improved resilience to global climate change and a higher quality of life in cities. This review highlights that the reclamation of urban brownfields through phytoremediation may provide several regulating (i.e., urban hydrology, heat mitigation, noise reduction, biodiversity, and CO₂ sequestration), provisional (i.e., bioenergy and added-value chemicals), and cultural (i.e., aesthetic, social cohesion, and health) ESs. Although future research should specifically be addressed to better support these findings, acknowledging ES is crucial for an exhaustive evaluation of phytoremediation as a sustainable and resilient technology.

Effects of microwave and plastic content on the sulfur migration during co-pyrolysis of biomass and plastic

In order to reduce the risks of sulfur-containing contaminants present in biofuels, the effects of microwave and content of hydrogen donor on the cracking of C-S bonds and the migration of sulfur were studied by co-pyrolysis of biomass and plastic. The synergistic mechanism of microwave and hydrogen donor was explored from the perspective of deducing the evolution of sulfur-containing compounds based on microwave thermogravimetric analysis. By combining temperature-weight curves, it was found that microwaves and hydrogen radicals promoted the cracking of sulfur-containing compounds and increased the mass loss of biomass during pyrolysis. The mixing ratio of hydrogen donor (plastic) was the key parameter resulting in the removal of sulfur from oil. By adjusting the mixing ratio, the yield of co-pyrolyzed oil was three times higher than that of cow dung pyrolysis alone and the relative removal rate of sulfur reached 73.67%. The relative content of sulfur in the oil was reduced by 73.77% due to the escape of sulfur-containing gases (H₂S, COS and C₂H₅SH) and the formation of sulfate crystals in the char. Microwave selectively heated sulfur-containing organics and hydrogen radicals stimulated the breaking of C-S bonds, which improved the cracking efficiency of the oil. This breaking will provide a theoretical and technological reference for the environmentally friendly treatment of biomass and biofuels.

Pre-Drying of Chlorine-Organic-Contaminated Soil in a Rotary Dryer for Energy Efficient Thermal Remediation

In response to the current problem of the high energy consumption of direct thermal desorption systems when treating soils with a high moisture content, we propose using the waste heat of the system to pre-dry soil to reduce its moisture. Taking chlorine-organic-contaminated soil as an object, an experimental study on the drying and pollutant desorption characteristics of soil in an indirect rotary dryer was carried out. The results show that the non-isothermal drying process was divided into warm-up and falling rate periods, and no constant period was observed. The higher the rotation speed, the lower the soil outlet temperature and the higher the drying tail gas temperature. Soil outlet and dry tail gas temperatures were lower for soils with a higher moisture content. Benzene and cis-1,2-dichloroethylene are easily desorbed. Therefore, the disposal of dry tail gas should be determined according to the type and concentration of soil pollutants present. The volumetric heat transfer coefficient was found to be 85-100 W m^-3 °C^-1, which provides a key parameter for the size design of a rotary dryer.

Electrokinetic delivery of permanganate in clay inclusions for targeted contaminant degradation

The use of electrokinetics (EK) has great potential to deliver reactants in impervious porous media, thus overcoming some of the challenges in the remediation of contaminants trapped in low-permeability zones. In this work we experimentally investigate electrokinetic transport in heterogeneous porous media consisting of a sandy matrix with a target clay inclusion. We demonstrate the efficient EK-delivery of permanganate in the target clay zone (transport velocity 0.3-0.5 m day^-1) and its reactivity with Methylene Blue, a positively charged contaminant trapped within the inclusion. The delivery method was optimized using a KH₂PO₄/K₂HPO₄ buffer to attenuate the effect of electrolysis reactions in the electrode chambers, thus mitigating the propagation of pH fronts and preventing the phenomenon of permanganate stalling. The experiments showed that the buffer electrical conductivity greatly impacts the potential gradient in the heterogeneous porous medium with implications on the observed rates of electrokinetic transport (variation up to 40%). The reactive experiments provided direct evidence of the permanganate penetration within the clay and of its capability to degrade the target immobilized contaminant. The experimental results were analyzed using a process-based model, elucidating the governing transport mechanisms and highlighting the effect of different mass transfer processes on conservative and reactive electrokinetic transport.

Effect of Exogenous Plant Debris and Microbial Agents on Phytoremediation of Copper-Contaminated Soil in Shanghai

Bioaugmentation is an important measure for improving the efficiency of phytoremediation. The objective was to identify the role of exogenous plant debris with different processing and microbial agents for soil characteristics, copper bioavailability and phytoextraction. The experimental design consisted of four blocks, which were divided into 48 plots. Each plot was planted with Fraxinus chinensis and Salix matsudana × alba, which was added to plant composts, woody chips and effective microorganisms (EM) agents, using an orthogonal experimental design. The results showed that the order of bioaugmentation materials on the Cu phytoextraction of two woody species was plant composts > wood chips > EM agents. The best performance of F. chinensis was in the T15 treatment (30% plant composts + 7.5% wood chips + 40 mL·m−2), with phytoextraction of 33.66 mg·m−2, as well as 4.32 mg·m−2 in the T16 treatment (30% plant composts + 15% wood chips) of S. matsudana × alba. Cu was accumulated mainly in the roots of the two woody plants. The phytoextraction of the above-ground parts was promoted by bioaugmentation, due to the improvement in the physical soil characteristics and Cu bioavailability. The phytoextraction performance of F. chinensis was promoted by the improvement in the Cu concentration after treatments, while for S. matsudana × alba, it was the dry biomass. Thus, targeted strengthening measures should be to applied, to improve the efficiency of phytoremediation.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Recent advances in soil remediation technology for heavy metal contaminated sites: A critical review

With the increasing development of industry and urbanization, heavy metal contaminated sites have become progressively conspicuous, particularly by unreasonable emissions from electroplating, nonferrous metals smelting, mine tailing, etc. In recent years, soil remediation technologies for heavy metal contaminated sites have developed rapidly. New and effective remediation technologies have emerged successively, and more successful practical applications have appeared. Therefore, systematical summarization of the current progress is essential. As a result, in this paper, some mainstream soil remediation technologies for heavy metal contaminated sites, including physical remediation (soil thermal desorption and soil replacement), bioremediation (phytoremediation and microbial remediation), chemical remediation (chemical leaching, chemical stabilization, electrokinetic remediation-permeable reactive barrier, and chemical oxidation/reduction), as well as various combined remediation are comprehensively reviewed. The influencing factors, advantages, disadvantages, remediation mechanism, and practical applications are also deeply discussed. Besides, the corresponding remediation strategies are put forward for the remediation of heavily polluted sites such as the chemical industry, smelting, and tailing areas. Overall, this review will be beneficial for the in-depth understanding and provide references for the reasonable selection and development of soil remediation technology for heavy metal contaminated sites.

Screening of Plants and Indigenous Bacteria to Improve Arsenic Phytoextraction

Arsenic (As) is one of the most common inorganic pollutants; unfortunately, it is also one of the most toxic and is therefore a cause of great concern for the health risks that could result from it. Removing arsenic from the soil using phytoremediation approaches is an effective strategy, and several studies demonstrate the ability of Cannabis sativa (TSN 19109, hemp) to tolerate this harmful contaminant. The aim of this work was to identify the best experimental conditions for a phytoremediation plan to be applied in a disused area located in Sicily (Italy) and contaminated by As, comparing Cannabis sativa with Brassica juncea (TSN 23059) and Zea mays (TSN 42269, corn). To assist the process, several chelating agents were tested to improve arsenic mobility, and two different sets of arsenic-tolerant bacteria were isolated from the rhizospheric soil of indigenous herbaceous species and used to promote plant growth, leading to a significant improvement in terms of biomass produced and phytoextraction. After the combined treatment, the arsenic content in the aerial part of the plants increased by more than two orders of magnitude (e.g., from 0.05 to 6.57 mg kg−1, from 0.04 to 6.69 mg kg−1, and from 0.03 to 5.57 mg kg−1 for brassica, corn, and hemp, respectively), confirming the marked increase in the total absorption of As by plants.

DNAPL flow and complex electrical resistivity evolution in saturated porous media: A coupled numerical simulation

Induced Polarization (IP) is a non-intrusive geophysical method to monitor Dense Non-Aqueous Phase Liquid (DNAPL) contamination and remediation processes underground. In this study, an advanced numerical code simulating DNAPL flow and complex electrical resistivity is presented. The model was validated against existing IP results and image measurements that were carried out previously in a series of 2D tank experiment. Multiphase flow modeling in porous media is coupled with electrical current modeling to simulate the process of DNAPL migration and the associated IP response. This brings a broader view of the contamination in space and time compared to surface and borehole measurements, especially when the results are supported by field measurements or laboratory experiments. The simulations are developed in 3D and are performed in COMSOL Multiphysics®. The simulations using petrophysical relationships for in-phase and quadrature resistivity and the results of the experiments are in complete accordance with each other in the parts of the tank where the saturation of DNAPL is relatively low (i.e. especially in the cone of depression in the pumping scenario). However, the parts associated with high saturation of DNAPL show high errors between the in-phase resistivity simulations and the results from experiments. The present work can be regarded as a preliminary study toward further applications of coupled IP-multiphase flow for more accurate detection and monitoring of DNAPLs. It is suggested that the choice of tool/approach in this study be extended to larger-scale studies for further investigation.

Petroleum sludge treatment and disposal techniques: a review

Petroleum sludge is a solid emulsified waste and contaminant commonly produced in the petroleum industry. In the recent past, there has been increased business growth in the oil sector, resulting in increased volumes of oily sludge characterized by high viscosity and toxicity. Therefore, sludge treatment before discarding is extremely necessary. This review seeks to highlight various conventional and evolving approaches in the treatment, recovery, and disposal of petroleum sludge and assess their suitability under various conditions.

Prediction Performance Comparison of Risk Management and Control Mode in Regional Sites Based on Decision Tree and Neural Network

The traditional risk management and control mode (RMCM) in regional sites has the defects of low efficiency, high cost, and lack of systematism. Trying to resolve these defects and explore the application possibility of machine learning, a characteristic dataset for RMCM in regional sites was established. Three decision tree (DT) algorithms (CHAID, EXHAUSTIVE CHAID, and CART) and two artificial neural network (ANN) algorithms [back propagation (BP) and radial basis function (RBF)] were implemented to predict RMCM in regional sites. The results showed that in the aspects of accuracy (ACC), precision (PRE), recall ratio (REC), and F₁ value, CART–DT was superior to CHAID–DT and EXHAUSTIVE CHAID–DT (E-CHAID–DT); and BP–ANN was superior to RBF–ANN. However, CART–DT was inferior to BP–ANN in ACC, PRE, REC, and F₁ value. BP–ANN model is good at non-linear mapping, and it has a flexible network structure and a low risk of over-fitting. The case study of a typical county demonstration area confirmed the extensibility of the method, and the method has great potential in RMCM prediction in regional sites in the future.

Research Progress on Heavy Metals Pollution in the Soil of Smelting Sites in China

Contamination by heavy metals is a significant issue worldwide. In recent decades, soil heavy metals pollutants in China had adverse impacts on soil quality and threatened food security and human health. Anthropogenic inputs mainly generate heavy metal contamination in China. In this review, the approaches were used in these investigations, focusing on geochemical strategies and metal isotope methods, particularly useful for determining the pathway of mining and smelting derived pollution in the soil. Our findings indicate that heavy metal distribution substantially impacts topsoils around mining and smelting sites, which release massive amounts of heavy metals into the environment. Furthermore, heavy metal contamination and related hazards posed by Pb, Cd, As, and Hg are more severe to plants, soil organisms, and humans. It's worth observing that kids are particularly vulnerable to Pb toxicity. And this review also provides novel approaches to control and reduce the impacts of heavy metal pollution. Hydrometallurgy offers a potential method for extracting metals and removing potentially harmful heavy metals from waste to reduce pollution. However, environmentally friendly remediation of contaminated sites is a significant challenge. This paper also evaluates current technological advancements in the remediation of polluted soil, such as stabilization/solidification, natural attenuation, electrokinetic remediation, soil washing, and phytoremediation. The ability of biological approaches, especially phytoremediation, is cost-effective and favorable to the environment.

Bioremediation of Copper- and Chromium-Contaminated Soils Using Agrostis capillaris L., Festuca pratensis Huds., and Poa pratensis L. Mixture of Lawn Grasses

Environmental pollution by toxic metals is a common ecological problem. Chromium and copper compounds released into the environment as a result of human-made stress pose a serious threat to living organisms. Phytoremediation is a promising method of toxic metals removal from contaminated sites. The concentration of metals in grass biomass—in the roots and aerial parts—was determined by X-ray fluorescence analysis. The estimation of numbers of microorganisms was conducted by a tenfold dilution and spread-plating method. It was shown that lawn grass accumulated from 69.1 ± 13.2 to 497.7 ± 74.1 mg/kg Cu and Cr during the growth in the contaminated soil with 50, 100, and 200 mg/kg of metals. In general, there was a pattern of accumulation of copper in the aerial part of the grass and chromium in the roots. Thus, the total copper concentration in the aerial part ranged from 105.2 ± 23.8 to 497.7 ± 74.1 mg/kg of plant biomass. The total chromium concentration in the roots ranged from 156.4 ± 47.9 to 426.8 ± 62.5 mg/kg. The viability of the soil microbiome was not inhibited at such metal concentrations. The obtained data allow lawn grass to be considered as promising for the phytoremediation of contaminated areas.

Microbial application in remediation of heavy metals: an overview

Heavy metal contamination poses a menacing threat to all living forms in the natural world due to its catastrophic consequences, contributing to environmental pollution. The need for human beings increasing each day along with anthropological activity is contributing directly to the destruction of the environment with the release of a large number of heavy metals into the food chain. These metals can be accumulated in the food chains and are very extremely toxic even at low concentrations. Heavy metals aggregation can deteriorate the healthy ecosystem of the water bodies as well. One of the major concerns is the diminution and administration of the heavy metals aggregating in marine water bodies and lakes. Heavy metals are not degradable and thus tend to remain in the environment for a prolonged time period. Heavy metal aggregation can demonstrate immediate repercussions such as DNA damage, inhibition of respiration and photosynthesis, and rapid reactive oxygen species generation. Conventional or standard chemical and physical methods for remediation of heavy metals are uneconomical and lead to the production of a large magnitude of chemical waste. This shifts the focus and interest towards the utilization of microbes in remediation of heavy metals from the environment which is eco-friendly and economical. To contend with heavy metals, microorganisms have a specific mechanism such as biotransformation, biosorption, and homeostasis. The microbial system is responsive to the toxicity that is created by the heavy metals which are easily water-soluble and available in the environment. The current review article describes the sources and effects of metal ions in the environment followed by bioremediation strategies followed in their remediation. Microbial approaches in remediation of metal ions from extraterrestrial materials are depicted in the paper.

A Comprehensive Evaluation Method for Soil Remediation Technology Selection: Case Study of Ex Situ Thermal Desorption

Quantitative evaluation of different contaminated soil remediation technologies in multiple dimensions is beneficial for the optimization and comparative selection of technology. Ex situ thermal desorption is widely used in remediation of organic contaminated soil due to its excellent removal effect and short engineering period. In this study, a comprehensive evaluation method of soil remediation technology, covering 20 indicators in five dimensions, was developed. It includes the steps of constructing an indicator system, accounting for the indicator, normalization, determining weights by analytic hierarchy process, and comprehensive evaluation. Three ex situ thermal desorption technology-direct thermal desorption, indirect thermal desorption, and indirect thermal heap-in China were selected for the model validation. The results showed that the direct thermal desorption had the highest economic and social indicator scores of 0.068 and 0.028, respectively. The indirect thermal desorption had the highest technical and environmental indicator scores of 0.118 and 0.427, respectively. The indirect thermal heap had the highest resource indicator score of 0.175. With balanced performance in five dimensions, the indirect thermal desorption had the highest comprehensive score of 0.707, which is 1.6 and 1.4 times higher than the direct thermal desorption and indirect thermal heap, respectively. The comprehensive evaluation method analyzed and compared the characteristics of the ex situ thermal desorption technology from different perspectives, such as specific indicators, multiple dimensions, and single comprehensive values. It provided a novel evaluation approach for the sustainable development and application of soil remediation technology.

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.

Impact of Old Pb Mining and Metallurgical Production in Soils from the Linares Mining District (Spain)

Mineral processing and metallurgy production centers may leave a far-reaching fingerprint of soil contamination. This scenario is particularly relevant in the mining district of Linares (Southern Spain), where former industrial sites are now dedicated to other land uses. Within this context, we selected five sectors of concern in Linares region, which are currently used as agricultural and residential areas. The study began with an edaphic characterization, including grain-size fractioning and soil chemical analyses, which were complemented by mineralogical and sequential extraction information. Anomalous soil concentrations of As, Cd, Cu, Pb, and Zn were found, with higher values than the admissible regional guideline limits. Moreover, chemical speciation indicated that in general, Pb, Zn, and Cd were highly available and bound mainly to the carbonate fraction. In addition, health risk assessment evidenced potential threats by Pb and As. Regarding remediation approaches, we observed that, in soils affected by mining and ore dressing activities, the clay and silt size fractions contained the highest pollution load, making them suitable for a size classification treatment. By contrast, in areas affected by metallurgical activity, pollutants were prone to be evenly distributed among all grain sizes, thereby complicating the implementation of such remediation strategies.

Animal carcass burial management: implications for sustainable biochar use

This review focuses on existing technologies for carcass and corpse disposal and potential alternative treatment strategies. Furthermore, key issues related to these treatments (e.g., carcass and corpse disposal events, available methods, performances, and limitations) are addressed in conjunction with associated environmental impacts. Simultaneously, various treatment technologies have been evaluated to provide insights into the adsorptive removal of specific pollutants derived from carcass disposal and management. In this regard, it has been proposed that a low-cost pollutant sorbent may be utilized, namely, biochar. Biochar has demonstrated the ability to remove (in)organic pollutants and excess nutrients from soils and waters; thus, we identify possible biochar uses for soil and water remediation at carcass and corpse disposal sites. To date, however, little emphasis has been placed on potential biochar use to manage such disposal sites. We highlight the need for strategic efforts to accurately assess biochar effectiveness when applied towards the remediation of complex pollutants produced and circulated within carcass and corpse burial systems.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Bioaugmentation for remediation of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) contaminated soil using a clay based bioformulation

Bioaugmentation is an important remediation strategy for hazardous organic compounds. A microcosm study was conducted to evaluate the remediation of soils contaminated with hazardous high explosive, Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) using an eco-friendly bioformulation. Janibacter cremeus, an enriched indigenous soil bacterium isolated from the explosive contaminated site was immobilized in a mixture of calcite and cocopeat for bioaugmentation. The developed bioformulation showed a consistent viability for 150 days, at 4 °C storage conditions. HMX at field concentrations was degraded in microcosms for 35 days under unsaturated (aerobic) and saturated (anoxic) moisture conditions. Negligible degradation was observed under unsaturated moisture conditions, whereas, saturated conditions led to substantial decrease in HMX. Mass spectrometric (MS) analysis revealed the formation of nitroso derivatives of HMX during the anoxic degradation. Also, observed was the presence of 5-hydroxy-4-nitro-2,4-diazapentanal, a precursor of 4- nitro-2,4-diazabutanal, which eventually could be mineralized. An inexpensive and natural carrier when chosen for immobilization of explosive degrading microbes was found to be effective in the in situ remediation of explosive.

Glyphosate adsorption onto porous clay heterostructure (PCH): kinetic and thermodynamic studies

The synthesis of PCH from natural bentonite produces a porous heterostructure material effective for the adsorption of glyphosate from water. The adsorption process takes place through an interaction between the silanol group of montmorillonite and/or the PCH adsorbent with the functional groups of glyphosate. The glyphosate adsorption isotherms, recorded for all the studied samples, have been established to be of Langmuir type. The kinetic of the herbicide adsorption on the PCH was best described by the pseudo-second-order model. With the increase in temperature from 25 to 50 °C, the sorption capacities of the materials studied towards glyphosate increased. The process of glyphosate adsorption was found to be endothermic and spontaneous in nature, as indicated by positive values of ΔH and negative values of ΔG. According to the results obtained, the herbicide sorption was more effective in a basic environment. The maximum amount of adsorbed glyphosate is almost doubled with PCH from 13.5 mg/g of natural clay to 27.5 mg/g of PCH.

Graphic abstract

Salix purpurea and Eleocharis obtusa Rhizospheres Harbor a Diverse Rhizospheric Bacterial Community Characterized by Hydrocarbons Degradation Potentials and Plant Growth-Promoting Properties

Phytoremediation, a method of phytomanagement using the plant holobiont to clean up polluted soils, is particularly effective for degrading organic pollutants. However, the respective contributions of host plants and their associated microbiota within the holobiont to the efficiency of phytoremediation is poorly understood. The identification of plant-associated bacteria capable of efficiently utilizing these compounds as a carbon source while stimulating plant-growth is a keystone for phytomanagement engineering. In this study, we sampled the rhizosphere and the surrounding bulk soil of Salixpurpurea and Eleocharis obusta from the site of a former petrochemical plant in Varennes, QC, Canada. Our objectives were to: (i) isolate and identify indigenous bacteria inhabiting these biotopes; (ii) assess the ability of isolated bacteria to utilize alkanes and polycyclic aromatic hydrocarbons (PAHS) as the sole carbon source, and (iii) determine the plant growth-promoting (PGP) potential of the isolates using five key traits. A total of 438 morphologically different bacterial isolates were obtained, purified, preserved and identified through PCR and 16S rRNA gene sequencing. Identified isolates represent 62 genera. Approximately, 32% of bacterial isolates were able to utilize all five different hydrocarbons compounds. Additionally, 5% of tested isolates belonging to genera Pseudomonas, Acinetobacter, Serratia, Klebsiella, Microbacterium, Bacillus and Stenotrophomonas possessed all five of the tested PGP functional traits. This culture collection of diverse, petroleum-hydrocarbon degrading bacteria, with multiple PGP traits, represents a valuable resource for future use in environmental bio- and phyto-technology applications.

Integrating Thermal Analysis and Reaction Modeling for Rational Design of Pyrolytic Processes to Remediate Soils Contaminated with Heavy Crude Oil

We developed a novel methodology that combines thermo-analytical measurements and mathematical methods to inform the reliable pyrolytic treatment of specific soil/contaminant systems. Our approach improves upon current "black-box" design methods that may overestimate the required treatment intensity and hinder cost efficacy. We used thermogravimetry and evolved gas analysis to characterize the complex network of soil mineral transformations, contaminant desorption, and pyrolytic reactions occurring when contaminated soils are heated in an anoxic atmosphere. The kinetics of these reactions were quantified using a distributed activation energy (DAE) approach with six pseudocomponents and used in a mathematical model for continuous-flow reactors to predict the removal of hydrocarbon contaminants without other fitting parameters. This model was tested with pilot-scale data from pyrolytic treatment of soils contaminated with crude oil and found to be a good predictor of the total petroleum hydrocarbon (TPH) removal for temperatures between 370 and 470 °C and residence times from 15 to 60 min. The light hydrocarbon fraction desorbed quickly, and over 99.7% removal was achieved at 420 °C and 15 min residence time. However, 95% removal of the heavy hydrocarbon fraction, which is a good proxy for polyaromatic hydrocarbons (PAHs), required 470 °C with 15 min residence time. This model can be employed to select operating conditions (e.g., reactor size, treatment time, and temperature) to reliably achieve remediation objectives for specific hydrocarbon/soil mixtures without inflating energy requirements, which would lower operating costs and decrease the process carbon footprint on a system-specific basis.

Global soil pollution by toxic elements: Current status and future perspectives on the risk assessment and remediation strategies - A review

The aim of this article is to review and present the state of the arte about the status of toxic elements (TEs) in soils and assess the potential risk using single and total complex pollution indices in a global scale. We compiled, integrated, and analyzed soil TE pollution data over almost a decade through key maps, which have not been reviewed up to date. All the in-situ and ex-situ remediation treatments have been also reviewed, illustrated, and compared, for the first time. The future perspectives have been discussed and summarized. This review demonstrates that the cornerstone maps and integrated information provide reliable geographical coordinates and inclusive information on TEs pollution, particularly in China. In-situ treatment approaches for TEs polluted soils are more cost-effective and applicable than ex-situ treatment trials. Selecting a feasible remediation strategy should to take the extent of contamination, treatment objectives, site characteristics, cost-efficiency, and public suitability into account. The summarized findings in this review may help to develop innovative and applicable methods for assessing the global soil pollution by TEs. Also, these findings may help to develop innovative, applicable, and feasibly economic methods for sustainable management of TEs contaminated soils to mitigate the environmental and human health risk.