Hazardous contaminants in the environment and their laccase-assisted degradation - A review

Kinetic studies on optimized extracellular laccase from Trichoderma harzianum PP389612 and its capabilities for azo dye removal

BACKGROUND

Azo dyes represent a common textile dye preferred for its high stability on fabrics in various harsh conditions. Although these dyes pose high-risk levels for all biological forms, fungal laccase is known as a green catalyst for its ability to oxidize numerous dyes.

METHODS

Trichoderma isolates were identified and tested for laccase production. Laccase production was optimized using Plackett-Burman Design. Laccase molecular weight and the kinetic properties of the enzyme, including Km and Vmax, pH, temperature, and ionic strength, were detected. Azo dye removal efficiency by laccase enzyme was detected for Congo red, methylene blue, and methyl orange.

RESULTS

Eight out of nine Trichoderma isolates were laccase producers. Laccase production efficiency was optimized by the superior strain T. harzianum PP389612, increasing production from 1.6 to 2.89 U/ml. In SDS-PAGE, purified laccases appear as a single protein band with a molecular weight of 41.00 kDa. Km and Vmax values were 146.12 μmol guaiacol and 3.82 μmol guaiacol/min. Its activity was stable in the pH range of 5-7, with an optimum temperature range of 40 to 50 °C, optimum ionic strength of 50 mM NaCl, and thermostability properties up to 90 °C. The decolorization efficiency of laccase was increased by increasing the time and reached its maximum after 72 h. The highest efficiency was achieved in Congo red decolorization, which reached 99% after 72 h, followed by methylene blue at 72%, while methyl orange decolorization efficiency was 68.5%.

CONCLUSION

Trichoderma laccase can be used as an effective natural bio-agent for dye removal because it is stable and removes colors very well.

Utility of metagenomics for bioremediation: a comprehensive review on bioremediation mechanisms and microbial dynamics of river ecosystem

Global industrialization has contributed substantial amounts of chemical pollutants in rivers, resulting in an uninhabitable state and impacting different life forms. Moreover, water macrophytes, such as water hyacinths, are abundantly present in polluted rivers, significantly affecting the overall water biogeochemistry. Bioremediation involves utilizing microbial metabolic machinery and is one of the most viable approaches for removing toxic pollutants. Conventional techniques generate limited information on the indigenous microbial population and their xenobiotic metabolism, failing the bioremediation process. Metagenomics can overcome these limitations by providing in-depth details of microbial taxa and functionality-related information required for successful biostimulation and augmentation. An in-depth summary of the findings related to pollutant metabolizing genes and enzymes in rivers still needs to be collated. The present study details bioremediation genes and enzymes functionally mined from polluted river ecosystems worldwide using a metagenomic approach. Several studies reported a wide variety of pollutant-degrading enzymes involved in the metabolism of dyes, plastics, persistent organic pollutants, and aromatic hydrocarbons. Additionally, few studies also noted a shift in the microbiome of the rivers upon exposure to contaminants, crucially affecting the ecological determinant processes. Furthermore, minimal studies have focused on the role of water-hyacinth-associated microbes in the bioremediation potentials, suggesting the need for the bioprospecting of these lesser-studied microbes. Overall, our study summarizes the prospects and utilities of the metagenomic approach and proposes the need to employ it for efficient bioremediation.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

Covalent organic framework in-situ immobilized laccase for the covalent polymerization removal of sulfamethoxazole in the presence of natural phenols: Prominent enzyme stability and activity

In current water treatment processes, pollutants are typically degraded into small molecules and CO2 for detoxification. This study employed laccase-mediated aggregation of new pollutants with natural phenolic compounds to remove pollutants by forming large molecular substances, effectively sequestering carbon. Free laccase is susceptible to environmental influences, causing deactivation. However, immobilizing laccase onto a carrier enhances enzyme stability. In the experiment, laccase was immobilized onto the covalent organic framework TpPa-1 through an in-situ loading process, resulting in immobilized laccase Lac@TpPa-1. Stability studies revealed that immobilized laccase outperformed free laccase in terms of pH, temperature, and recyclability. Moreover, immobilized laccase was employed for catalyzing the removal of emerging pollutants containing natural phenolic compounds, achieving an 80.53% removal rate with the addition of 0.02 g of laccase within 5 h. Analytical techniques like Fourier-transform ion cyclotron resonance mass spectrometry were used to uncover reaction pathways, demonstrating the presence of radical polymerization and 1, 4 nucleophilic addition. This research utilized TpPa-1 as a carrier for laccase immobilization, promoting oxidation-induced polymerization for efficient pollutant removal. It provides a theoretical foundation for understanding the interplay between emerging pollutants and phenolic compounds in natural environments and enhances the practical application of laccase through immobilization.

Laccase as a useful assistant for maize to accelerate the phenanthrene degradation in soil

Polycyclic aromatic hydrocarbon (PAH) pollution has attracted much attention due to their wide distribution in soil environment and serious harm to human health. In order to establish an efficient and eco-friendly technology for remediation of PAH-contaminated soil, phytoremediation utilizing maize assisted with enzyme remediation was explored in this study. The results showed that the participation of laccase could promote the degradation of phenanthrene (PHE) from soil and significantly reduce the accumulation of PHE in maize. The degradation efficiency of PHE in soil could reach 77.19% under laccase-assisted maize remediation treatment, while the accumulation of PHE in maize roots and leaves decreased by 41.23% and 74.63%, respectively, compared to that without laccase treatment, after 24 days of maize cultivation. Moreover, it was found that laccase addition shifted the soil microbial community structure and promoted the relative abundance of some PAH degrading bacteria, such as Pseudomonas and Sphingomonas. In addition, the activities of some enzymes that were involved in PAH degradation process and soil nutrient cycle increased with the treatment of laccase enzyme. Above all, the addition of laccase could not only improve the removal efficiency of PHE in soil, but also alter the soil environment and reduce the accumulation of PHE in maize. This study provided new perspective for exploring the efficiency of the laccase-assisted maize in the remediation of contaminated soil, evaluating the way for reducing the risk of secondary pollution of plants in the phytoremediation process.

Immobilization of laccase on magnetic mesoporous silica as a recoverable biocatalyst for the efficient degradation of benzo[a]pyrene

Laccase is an efficient green biocatalyst, widely used for the degradation of various organic pollutants. However, free laccase is unstable and difficult to recover, which limits its practical application. In this study, a multilayer core-shell magnetic mesoporous silica (Fe3O4@d-SiO2@p-SiO2) microsphere with high specific surface area (275 m2 g-1) was fabricated for immobilization of laccase. The unique structure of Fe3O4@d-SiO2@p-SiO2 enabled the successful immobilization of laccase. Under the optimal immobilization conditions of laccase concentration of 1.5 mg mL-1, immobilization time of 6 h, immobilization pH of 6, the loading capacity of laccase was up to 567 mg g-1. Compared with free laccase, immobilized laccase exhibited remarkable pH stability, thermal stability and storage stability. Moreover, the immobilized laccase was easy to achieve magnetic recovery and possessed excellent reusability, with its activity remaining 58.2% after 10 consecutive reuses. More importantly, immobilized laccase had good degradation performance for benzo[a]pyrene (BaP), which can achieve rapid and efficient degradation of low concentration BaP over a wide range of pH and temperature. The removal efficiency of BaP was up to 99.0% within 1 h, and still exceeded 35.0% after 5 cycles. The removal of BaP by immobilized laccase was achieved through both adsorption and degradation. The degradation products and possible degradation pathways were determined by GC-MS analysis. This study indicated that Fe3O4@d-SiO2@p-SiO2 could effectively enhance the stability and biocatalytic activity of laccase, which is expected to provide a new clean biotechnology for the remediation of BaP contaminated sites.

Computational explorations of the interaction between laccase and bisphenol A: influence of surfactant and different organic solvents

Bisphenol A (BPA), as an environmental endocrine disruptor can cause damage to the reproductive, nervous and immune systems. Laccase can be used to degrade BPA. However, laccase is easily deactivated, especially in organic solvents, but the specific details are not clear. Molecular dynamics simulations were used to investigate the reasons for changes in laccase activity in acetonitrile (ACN) and dimethyl formamide (DMF) solutions. In addition, the effects of ACN and DMF on the activity of laccase and surfactant rhamnolipid (RL) on the degradation of BPA by laccase were investigated. Results showed that addition of ACN changed the structure of the laccase, not only decreasing the van der Waals interaction that promoted the binding of laccase with BPA, but also increasing the polar solvation free energy that hindered the binding of laccase with BPA, so it weakened the laccase activity. DMF greatly enhanced the van der Waals interaction between laccase and BPA, and played a positive role in their binding. The addition of surfactant RL alleviated the effect of organic solvent on the activity of laccase by changing the polar solvation energy. The mechanism of surfactant RL affecting laccase activity in ACN and DMF is described, providing support for understanding the effect of organic solvents on laccase.

Plasticizer phthalate esters degradation with a laccase from Trametes versicolor: effects of TEMPO used as a mediator and estrogenic activity removal

Phthalate esters (PAEs) are toxic and persistent chemicals that are ubiquitous in the environment and have attracted worldwide attention due to their threats to the environment and human health. Dimethyl phthalate (DMP) is a relatively simple structure and one of the most observed PAEs in the environment. This study investigated the degradation of the DMP using Trametes versicolor laccase and its laccase-mediator systems. The degradation effect of laccase alone on DMP was poor, while the laccase-mediator systems can effectively enhance the degradation efficiency. Within 24 h, 45% of DMP (25 mg/L) was degraded in the presence of 0.8 U/mL laccase and 0.053 mM 2, 2, 6, 6-tetramethylpiperidine-1-oxyl (TEMPO). A certain concentration (1 mM) of metal ions Al3+, Cu2+ or Ca2+ can positively promote DMP degradation with the laccase-TEMPO system. Moreover, the structure of PAEs also had a great influence on the degradation efficiency. Higher degradation efficiencies were observed when incubating PAEs with short alkyl side chains by the laccase-TEMPO system compared to that with long alkyl side chains. Additionally, the branched-chain PAEs had a better degradation effect than the straight-chain. The estrogenic activity of the DMP solution after reaction was much smaller than that of the original solution. Finally, transformation products ortho-hydroxylated DMP and phthalic acid were identified by GC-MS and the possible degradation pathway was proposed. This study verifies the feasibility of the laccase-TEMPO system to degrade PAEs and provides a reference for exploring more potential value of laccase.

Effective assessment of biopolymer-based multifunctional sorbents for the remediation of environmentally hazardous contaminants from aqueous solutions

Persistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective in removing toxic pollutants from the water environment. The upfront costs of these treatment methods are extremely high, and they require the use of harmful synthetic chemicals. For this reason, the development of new technologies for the treatment and recycling of wastewater is an absolute necessity. Our way of life can be made more sustainable by the synthesis of adsorbents based on biomass, making the process less harmful to the environment. Biopolymers offer a sustainable alternative to synthetic polymers, which are manufactured by joining monomer units through covalent bonding. This review presents a detailed classification of biopolymers such as pectin, alginate, chitosan, lignin, cellulose, chitin, carrageen, certain proteins, and other microbial biomass compounds and composites, with a focus on their sources, methods of synthesis, and prospective applications in wastewater treatment. A concise summary of the extensive body of knowledge on the fate of biopolymers after adsorption is also provided. Finally, consideration is given to open questions about future developments leading to environmentally friendly and economically beneficial applications of biopolymers.

Evaluating the efficacy of wood decay fungi and synthetic fungal consortia for simultaneous decolorization of multiple textile dyes

Wastewater from the textile industry dyeing process containing high loads of synthetic dyes leads to pollution of water with these toxic and genotoxic dyes. Much effort has been put towards developing biological systems to resolve this issue. Mycoremediation is a well-known approach using fungi to remove, degrade, or remediate pollutants and can be applied to decolorize textile dyes in industrial effluent. Fungal strains from four genera of Polyporales, namely Coriolopsis sp. TBRC 2756, Fomitopsis pinicola TBRC-BCC 30881, Rigidoporus vinctus TBRC 6770, and Trametes pocas TBRC-BCC 18705, were studied for decolorization efficiency, and R. vinctus was found to exhibit the greatest activity in removing all seven tested reactive dyes and one acid dye with a decolorization efficiency of 80% or more within 7 days under limited oxygen. This fungus simultaneously degraded multiple dyes in synthetic wastewater as well as industrial effluent from the dyeing process. To enhance the decolorization rate, various fungal consortia were formulated for testing. However, these consortia only trivially improved efficiency compared with using R. vinctus TBRC 6770 alone. Evaluation of R. vinctus TBRC 6770 decolorization ability was further performed in a 15-L bioreactor to test its ability to eliminate multiple dyes from industrial effluent. The fungus took 45 days to adapt to growth in the bioreactor and subsequently reduced dye concentration to less than 10% of the initial concentration. The following six cycles required only 4-7 days to reduce dye concentrations to less than 25%, demonstrating that the system can run efficiently for multiple cycles without the need for extra medium or other carbon sources.

Edible fungi efficiently degrade aflatoxin B1 in cereals and improve their nutritional composition by solid-state fermentation

Aflatoxin B₁ (AFB₁) is extremely harmful to human and livestock. Laccase, a green catalyst, has been shown to effectively degrade AFB₁ and can be obtained from edible fungi. The objective of this study was to screen edible fungi with high laccase activity and determine their effects on the degradation of AFB₁ in cereals and the nutritional composition of the cereals through solid-state fermentation. Results from plate assays confirmed that 51 of the 55 tested edible fungi could secrete laccase. Submerged fermentation results showed that 17 of the 51 edible fungi had maximum laccase activity exceeding 100 U/L. The growth of different edible fungi varied significantly in corn, rice and wheat. More importantly, 6 edible fungi with high laccase activity and good growth could efficiently degrade AFB₁ in cereals. We found for the first time that Ganoderma sinense could not only secrete highly active laccase and efficiently degrade AFB₁ in corn by 92.91%, but also improve the nutritional quality of corn. These findings reveal that solid-state fermentation of cereals with edible fungi is an environmentally friendly and efficient approach for degrading AFB₁ in cereals and improving the nutritional composition of cereals.

Biodegradation of Low Density Polyethylene by the Fungus Cladosporium sp. Recovered from a Landfill Site

Low density polyethylene (LDPE) has been widely used commercially for decades; however, as a non-degradable material, its continuous accumulation has contributed to serious environmental issues. A fungal strain, Cladosporium sp. CPEF-6 exhibiting a significant growth advantage on MSM-LDPE (minimal salt medium), was isolated and selected for biodegradation analysis. LDPE biodegradation was analyzed by weight loss percent, change in pH during fungal growth, environmental scanning electron microscopy (ESEM), and Fourier transformed infrared spectroscopy (FTIR). Inoculation with the strain Cladosporium sp. CPEF-6 resulted in a 0.30 ± 0.06% decrease in the weight of untreated LDPE (U-LDPE). After heat treatment (T-LDPE), the weight loss of LDPE increased significantly and reached 0.43 ± 0.01% after 30 days of culture. The pH of the medium was measured during LDPE degradation to assess the environmental changes caused by enzymes and organic acids secreted by the fungus. The fungal degradation of LDPE sheets was characterized by ESEM analysis of topographical alterations, such as cracks, pits, voids, and roughness. FTIR analysis of U-LDPE and T-LDPE revealed the appearance of novel functional groups associated with hydrocarbon biodegradation as well as changes in the polymer carbon chain, confirming the depolymerization of LDPE. This is the first report demonstrating the capacity of Cladosporium sp. to degrade LDPE, with the expectation that this finding can be used to ameliorate the negative impact of plastics on the environment.

Phytotoxicity and cytotoxicity attributes of immobilized Bacillus cereus treated and untreated textile effluents on Vigna mungo seeds and Artemia franciscana larvae

The physicochemical attributes of textile effluents collected from secondary treatment stage was investigated in this study and also assess the biosorption potential of membrane immobilized Bacillus cereus and free form of Bacillus cereus on textile effluent through bioreactor model study to find a sustainable solution to manage the textile effluent as vital need. Furthermore, the phytotoxicity and cytotoxicity nature of treated and untreated textile effluents on Vigna mungo and Artemia franciscana larvae under laboratory conditions as a novel approach. The textile effluent physicochemical parameter analysis results showed that the properties such as colour (Hazen unit), pH, turbidity, As, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Cd, Cl, Cr, Cu, Hg, Ni, Pb, SO₄^2-, and Zn were beyond the acceptable limits. Bacillus cereus immobilized on a polyethylene membrane eliminated greater amounts of dye (25.0 ± 1.3, 56.5 ± 1.8, 57.18 ± 1.5, and 54.34 ± 1.7 Hazen unit from An1, Ae2, Ve3, and So4 respectively) and pollutants (As: 0.9-2.0, Cd: 6-8, Cr: 300-450, Cu: 5-7, Hg: 0.1-0.7, Ni: 8-14, Pb: 4-5, and Zn: 4-8 mg L^-1) from textile effluent in a week of biosorption investigation using a bioreactor model (batch type) compared to a free form of B. cereus on textile effluent. The phytotoxicity and cytotoxicity study results revealed that the membrane immobilized B. cereus treated textile effluent exposure showed reduced phytotoxicity and minimal cytotoxicity (including mortality) percentage compared with free form B. cereus treated and untreated textile effluents. These entire results conclude that the membrane immobilized B. cereus may considerably minimize/detoxify the harmful pollutants from the textile effluents. A large scale level biosorption approach need to be performed to validate the maximum pollutants removing potential of this membrane immobilized bacteria species and optimal conditions for effective remediation.

Effective biodegradation of chlorophenols, sulfonamides, and their mixtures by bacterial laccase immobilized on chitin

Coexisting multi-pollutants like sulfonamides (SAs) and chlorophenols (CPs) in the ecological environment pose a potential risk to living organisms. The development of a strategy for the effective removal of multiple pollutants has become an urgent need. Herein, we systematically investigated the potential of immobilized bacterial laccase to remove chlorophenols (CPs), sulfonamides (SAs), and their mixtures. Laccase from Bacillus pumilus ZB1 was efficiently immobilized on chitin and its thermal stability, pH stability, and affinity to substrates were improved. Reusability assessment showed the immobilized laccase retained 75.5% of its initial activity after five cycles. The removal efficiency of CPs and SAs by immobilized laccase was significantly improved compared with that of free laccase. In particular, the removal of 2,4-dichlorophenol and 2,4,6-trichlorophenol reached 96.9% and 89.3% respectively within 8 h. The immobilized laccase could remove 63.70% of 2,4-dichlorophenol after four cycles. The degradation pathways of 2,4-dichlorophenol and sulfamethazine were proposed via LC/MS analysis. When the co-pollutants containing 2,4,6-trichlorophenol and sulfamethoxazole, immobilized laccase showed 100% removal of 2,4,6-trichlorophenol and 38.71% removal of sulfamethoxazole simultaneously. Cytotoxicity and phytotoxicity tests indicated that immobilized laccase can alleviate the toxicity of co-pollutants. The results demonstrate that chitin-based laccase immobilization can be an effective strategy for the removal of SAs, CPs, and their co-pollutants.

Identification of laccase genes in Trichoderma asperellum Ts93

Although extensive research efforts have been dedicated to characterizing the laccase from white-rot fungus, little information is available on laccases from Trichoderma spp. A copper-tolerant strain with the ability to produce laccase was isolated and identified as Trichoderma asperellum Ts93. Under optimized conditions, the maximum laccase activity was 1.96 U/ml. The genome-wide survey of Ts93 revealed the presence of seven putative laccase genes that all contained the conserved domain and were divided into three different phylogenetic groups. Among these genes, three contained the four copper-binding conserved regions. The expression profiles acquired through real-time quantitative PCR analysis showed that five of the seven genes were significantly upregulated in response to laccase activity. Seven laccase genes in T. asperellum were identified for the first time by whole-genome sequencing followed by phylogenetic analysis. The findings of this work provide valuable information for the functional analysis of laccase genes in Trichoderma spp.

Laccase Production from Agrocybe pediades: Purification and Functional Characterization of a Consistent Laccase Isoenzyme in Liquid Culture

Laccases are valuable enzymes as an excellent ecological alternative for bioremediation issues because they can oxidize persistent xenobiotic compounds. The production and characterization of extracellular laccases from saprotrophic fungi from disturbed environments have been scarcely explored, even though this could diversify their functional characteristics and expand the conditions in which they carry out their catalysis. Agrocybe pediades, isolated from a disturbed forest, produces an extracellular laccase in liquid culture. The enzyme was purified, identified and characterized. Copper and hexachlorobenzene do not function as inducers for the laccase produced. Partial amino acid sequences were obtained by LC-MS/MS that share similarity with laccases from other fungi. Purified laccase is a monomer with a molecular mass between 55-60 kDa and had an optimum activity at pH 5.0 and the optimum temperature at 45 °C using 2,6-dimethoxyphenol (2,6-DMP) as substrate. The K_m and V_max also determined with 2,6-DMP were 100 μM and 285 μmol∙min^-1∙mg^-1, respectively, showing that the laccase of A. pediades has a higher affinity for this substrate than that of other Agaricales. These features could provide a potential catalyst for different toxic substrates and in the future laccase could be used in environmental recovery processes.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Does the presence of heavy metal and catechol contaminants in organic waste challenge the physiological performance of the bioconverter Hermetia illucens?

The increased human activities and the worldwide population growth are constantly increasing the production of solid wastes. Over the years, waste management has thus become a prominent issue for several companies and municipalities, and several engineering techniques have been developed over the years in order to convert wastes into other solid materials or fuels. Yet, several techniques are important contributors to environmental pollution, and biological-based solutions have thus become progressively very popular. In particular, insect-based conversion of organic wastes represent eco-friendly tools, and the growth and development of insect species such as the black soldier fly have been tested and improved for a large diversity of organic wastes. However, organic wastes, including food wastes, may contain several pollutants such as heavy metals and catechol which could affect the bioconversion efficiency by incurring physiological costs that would be undetectable at the organismal level, i.e. have null to little effects on the life cycle of Hermetia illucens. In this context, assessments of antioxidant capacities can provide a rapid and low-cost evaluation of the capability of insects to handle exposure to heavy metals and catechol. Here, we aimed at measuring the physiological responses of the black soldier fly H. illucens grown on food wastes (kitchen, fruit or vegetable wastes) contaminated by cadmium, iron, lead or catechol. Biomarkers of oxidative stress (concentrations of hydrogen peroxide and protein carbonyls), non-enzymatic total antioxidant capacity (ascorbic acid amounts) and activity of enzymatic antioxidants (activities of superoxide dismutase and polyphenoloxidase) were measured from the gut of the larvae. We found no evidence of deleterious impacts of food waste contamination by catechol or heavy metals on H. illucens. In most experimental treatments, the array of physiological endpoints we measured for evaluating the degree of oxidative stress experienced by the larvae remained similar to controls. Possible physiological effects were reported for cadmium and catechol only, which tended to increase the oxidation of proteins and hydrogen peroxide in the larvae. Finally, our results suggested that the nature of the food waste could equally affect the physiological responses of the insect.

Ketoprofen and aspirin removal by laccase immobilized on date stones

In recent years, enzymatic remediation/biocatalysis has gained prominence for the bioremediation of recalcitrant chemicals. Laccase is one of the commonly investigated enzymes for bioremediation applications. There is a growing interest in immobilizing this enzyme onto adsorbents for achieving high pollutant removal through simultaneous adsorption and biodegradation. Due to the influence of the biomolecule-support interface on laccase activity and stability, it is crucial to functionalize the solid carrier prior to immobilization. Date stone (PDS), as an eco-friendly, low-cost, and effective natural adsorbent, was utilized as a carrier for laccase (fungus Trametes versicolor). After activating PDS through chemical treatments, the surface area increased by thirty-six-fold, and carbonyl groups became more prominent. Batch experiments were carried out for ketoprofen and aspirin biodegradation in aqueous solutions. After six cycles, the laccase maintained 54% of its original activity confirmed by oxidation tests of 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). In addition, the storage, pH, and thermal stability of immobilized laccase on functionalized date stone (LFPDS) were found to be superior to that of free laccase, demonstrating its potential for ongoing applications. In the aqueous batch mode, this immobilized laccase system was used to degrade 25 mg L-1 of ketoprofen and aspirin, resulting in almost complete removal within 4 h of treatment. This study reveals that agricultural wastes such as date stone can successfully be valorized through simple activation techniques, and the final product can be used as an adsorbent and substrate for immobilization enzyme. The high efficiency of the LFPDS in removing ketoprofen and aspirin highlights the potential of this technology for removing pharmaceuticals and merits its continued development.

Investigation of Abortiporus biennis lignocellulolytic toolbox, and the role of laccases in polystyrene degradation

White-rot basidiomycetes are the only microorganisms able to produce both hydrolytic (cellulases and hemicellulases) and oxidative (ligninolytic) enzymes for degrading all lignocellulose constituents. Their enzymatic machinery makes them ideal for the discovery of novel enzymes with desirable properties. In the present work, Abortiporus biennis, a white-rot fungus, was studied in regard to its lignocellulolytic potential. Secretomics and biochemical analyses were employed to study the strain's enzymatic arsenal, after growth in corn stover cultures and xylose-based defined media. The results revealed the presence of all the necessary enzymatic activities for complete breakdown of biomass, while the prominent role of oxidative enzymes in the lignocellulolytic strategy of the strain became evident. Two novel laccases, AbiLac1 and AbiLac2, were isolated from the culture supernatant with ion-exchange chromatography. Characterization of purified laccases revealed their ability to oxidize a wide variety of phenolic and non-phenolic substrates. AbiLac1 was found to oxidize polystyrene powder, showing high depolymerization potential, based on radical chain scission mechanism as evidenced by molecular weight decrease. The results of the present study demonstrate the biotechnological potential of the unexplored enzymatic machinery of white-rot basidiomycetes, including the design of improved lignocellulolytic cocktails, as well as the degradation and/or valorization of plastic waste materials.

Study of Membrane-Immobilized Oxidoreductases in Wastewater Treatment for Micropollutants Removal

The development of efficient strategies for wastewater treatment to remove micropollutants is of the highest importance. Hence, in this study, we presented a rapid approach to the production of biocatalytic membranes based on commercially available cellulose membrane and oxidoreductase enzymes including laccase, tyrosinase, and horseradish peroxidase. Effective enzyme deposition was confirmed based on Fourier transform infrared spectra, whereas results of spectrophotometric measurements showed that immobilization yield for all proposed systems exceeded 80% followed by over 80% activity recovery, with the highest values (over 90%) noticed for the membrane-laccase system. Further, storage stability and reusability of the immobilized enzyme were improved, reaching over 75% after, respectively, 20 days of storage, and 10 repeated biocatalytic cycles. The key stage of the study concerned the use of produced membranes for the removal of hematoporphyrin, (2,4-dichlorophenoxy)acetic acid (2,4-D), 17α-ethynylestradiol, tetracycline, tert-amyl alcohol (anesthetic drug), and ketoprofen methyl ester from real wastewater sampling at various places in the wastewater treatment plant. Although produced membranes showed mixed removal rates, all of the analyzed compounds were at least partially removed from the wastewater. Obtained data clearly showed, however, that composition of the wastewater matrix, type of pollutants as well as type of enzyme strongly affect the efficiency of enzymatic treatment of wastewater.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Current Challenges for Biological Treatment of Pharmaceutical-Based Contaminants with Oxidoreductase Enzymes: Immobilization Processes, Real Aqueous Matrices and Hybrid Techniques

The worldwide access to pharmaceuticals and their continuous release into the environment have raised a serious global concern. Pharmaceuticals remain active even at low concentrations, therefore their occurrence in waterbodies may lead to successive deterioration of water quality with adverse impacts on the ecosystem and human health. To address this challenge, there is currently an evolving trend toward the search for effective methods to ensure efficient purification of both drinking water and wastewater. Biocatalytic transformation of pharmaceuticals using oxidoreductase enzymes, such as peroxidase and laccase, is a promising environmentally friendly solution for water treatment, where fungal species have been used as preferred producers due to their ligninolytic enzymatic systems. Enzyme-catalyzed degradation can transform micropollutants into more bioavailable or even innocuous products. Enzyme immobilization on a carrier generally increases its stability and catalytic performance, allowing its reuse, being a promising approach to ensure applicability to an industrial scale process. Moreover, coupling biocatalytic processes to other treatment technologies have been revealed to be an effective approach to achieve the complete removal of pharmaceuticals. This review updates the state-of-the-art of the application of oxidoreductases enzymes, namely laccase, to degrade pharmaceuticals from spiked water and real wastewater. Moreover, the advances concerning the techniques used for enzyme immobilization, the operation in bioreactors, the use of redox mediators, the application of hybrid techniques, as well as the discussion of transformation mechanisms and ending toxicity, are addressed.

Degradation of 2,4-DCP by the immobilized laccase on the carrier of sodium alginate-sodium carboxymethyl cellulose

In this paper, sodium alginate-sodium carboxymethyl cellulose (SA-CMC) composite material was used as a carrier, and sodium alginate-embedded laccase (Lac@SC) was prepared by traditional embedding method. After that, ethylene glycol diglycidyl ether (EGDE) and glutaraldehyde (GLU) were used as cross-linking agents, two different cross-linking-embedded co-immobilized laccases (Lac@SCG and Lac@SCE) were innovatively prepared, respectively, and then these immobilized laccases were characterized by SEM, FT-IR and XRD, and the stability of the three immobilized laccases was explored. In addition, the effects of different factors on the removal of 2,4-DCP by immobilized laccase were studied, and the degradation kinetic models of three immobilized laccases on 2,4-DCP were summarized, the possible degradation pathways of pollutants were also given. Experimental results showed that compared to free laccase, the pH stability, thermal stability and storage stability of immobilized laccase were greatly improved. These immobilized laccases could maintain high activity at pH3~6, 45~55 °C. Lac@SCG had the best storage stability. After 30 days of storage, the relative enzyme activity was still more than 40%. Lac@SC had good reusability, the relative enzyme activity was still more than 50% after 5 uses. In the degradation of 2,4-DCP, all three immobilized laccases showed good performance, when Lac@SCE was at pH5, 35 °C, 25 h, the removal rate of 2,4-DCP could reach 95.2%; When at 45 °C, Lac@SC had the highest degradation rate which reach to 94%; At 45 °C, the degradation rate of Lac@SCG reached 83.2%.

Organic Amendments: Direct Application and Residual Effects on Vegetative and Reproductive Growth of Hot Pepper

The high production potential of coffee and animals in the Gedeo zone that could produce huge amounts of coffee pulp and animal manure wastes has been polluting the environment. In this sense, this study was aimed at averting pollution and managing plant and animal wastes, focusing on the effect of coffee pulp and animal manure in the form of vermicompost, biochar, and ordinary compost on hot pepper vegetative and reproductive growth. A 15 ton per hectare of each treatment was applied in a randomized complete block design replicated three times. Vegetative and reproductive growth parameters (plant height, leaf number, number of branches, days to 50% flowering, total fresh biomass, number of fruits per plant, single fruit length, and fruit yield per hectare) were recorded, and the statistical difference was determined at 5% significance level using R-program. The result showed that there was a significant difference among treatments. Coffee pulp vermicompost prepared using Eisenia fetida earthworm had significantly ( $P<0.05$ ) higher results in plant height, leaf number, number of branches, total fresh biomass, number of fruits per plant, single fruit length, and total yield, while the minimum values were recorded in topsoil (control treatment) and animal manure compost. The direct and residual effects of vermicompost and biochar organic amendments were the potential organic fertilizers for hot pepper fast growth and to produce enormous yield, which might be due to their nature in improving soil physicochemical and biological properties as well as nutrient uptake.

Corn Cob as a Green Support for Laccase Immobilization-Application on Decolorization of Remazol Brilliant Blue R

The high demand for food and energy imposed by the increased life expectancy of the population has driven agricultural activity, which is reflected in the larger quantities of agro-industrial waste generated, and requires new forms of use. Brazil has the greatest biodiversity in the world, where corn is one of the main agricultural genres, and where over 40% of the waste generated is from cobs without an efficient destination. With the aim of the valorization of these residues, we proposed to study the immobilization of laccase from Aspergillus spp. (L_Asp) in residual corn cob and its application in the degradation of Remazol Brilliant Blue R (RBBR) dye. The highest yields in immobilized protein (75%) and residual activity (40%) were obtained at pH 7.0 and an enzyme concentration of 0.1 g.mL⁻¹, whose expressed enzyme activity was 1854 U.kg⁻¹. At a temperature of 60 °C, more than 90% of the initial activity present in the immobilized biocatalyst was maintained. The immobilized enzyme showed higher efficiency in the degradation (64%) of RBBR dye in 48 h, with improvement in the process in 72 h (75%). The new biocatalyst showed operational efficiency during three cycles, and a higher degradation rate than the free enzyme, making it a competitive biocatalyst and amenable to industrial applications.

Robust strategies to eliminate endocrine disruptive estrogens in water resources

The widespread occurrence and ubiquitous distribution of estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) in our water matrices, is an issue of global concern. Public and regulatory authorities are concerned and placing joint efforts to eliminate estrogens and related environmentally hazardous compounds, due to their toxic influences on the environmental matrices, ecology, and human health, even at low concentrations. However, most of the available literature is focused on the occurrence of estrogens in different water environments with limited treatment options. Thus, a detailed review to fully cover the several treatment processes is needed. This review comprehensively and comparatively discusses many physical, chemical, and biological-based treatments to eliminate natural estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) and related synthetic estrogens, e.g., 17α-ethinylestradiol (EE2) and other related hazardous compounds. The covered techniques include adsorption, nanofiltration, ultrafiltration, ultrasonication, photocatalysis of estrogenic compounds, Fenton, Fenton-like and photo-Fenton degradation of estrogenic compounds, electro-Fenton degradation of estrogenic compounds, ozonation, and biological methods for the removal of estrogenic compounds are thoroughly discussed with suitable examples. The studies revealed that treatment plants based on chemical and biological approaches are cost-friendly for removing estrogenic pollutants. Further, there is a need to properly monitor and disposal of the usage of estrogenic drugs in humans and animals. Additional studies are required to explore a robust and more advanced oxidation treatment strategy that can contribute effectively to industrial-scale applications. This review may assist future investigations, monitoring, and removing estrogenic compounds from various environmental matrices. In concluding remarks, a way forward and future perspectives focusing on bridging knowledge gaps in estrogenic compounds removal are also proposed.

Feasible Cluster Model Method for Simulating the Redox Potentials of Laccase CueO and Its Variant

Laccases are regarded as versatile green biocatalysts, and recent scientific research has focused on improving their redox potential for broader industrial and environmental applications. The density functional theory (DFT) quantum mechanics approach, sufficiently rigorous and efficient for the calculation of electronic structures, is conducted to better comprehend the connection between the redox potential and the atomic structural feature of laccases. According to the crystal structure of wild type laccase CueO and its variant, a truncated miniature cluster model method was established in this research. On the basic of thermodynamic cycle, the overall Gibbs free energy variations before and after the one-electron reduction were calculated. It turned out that the trends of redox potentials to increase after variant predicted by the theoretical calculations correlated well with those obtained by experiments, thereby validating the feasibility of this cluster model method for simulating the redox potentials of laccases.

Green production of a yellow laccase by Coriolopsis gallica for phenolic pollutants removal

As a group of green biocatalysts, fungal laccases have aroused great interest in diverse biotechnological fields. Therein, yellow laccase has advantages over blue laccase in catalytic performance, but it is not common in the reported fungal laccases. Here, we report a yellow laccase from white-rot fungus Coriolopsis gallica NCULAC F1 about its production, purification, characterization, and application. Laccase production in the co-fermentation of pomelo peel and wheat bran reached the enzyme activity by 10,690 U/L after 5 days with a 13.58-time increase. After three steps of purification, laccase increased the specific activity from 30.78 to 188.79 U/mg protein with an activity recovery of 45.64%. The purified C. gallica laccase (CGLac) showed a molecular mass of about 57 kDa. CGLac had a yellow color and no absorption peaks at 610 nm and 330 nm, suggesting that it’s a yellow laccase. CGLac exhibited stability towards temperature (40–60 °C) and neutral pH (6.0–8.0). Fe³⁺ and Mn²⁺ strongly stimulated CGLac activity by 162.56% and 226.05%, respectively. CGLac remained high activities when exposed to organic reagents and putative inhibitors. Additionally, CGLac contributed to 90.78%, 93.26%, and 99.66% removal of phenol, p-chlorophenol and bisphenol A after 120 min, respectively. In conclusion, a green efficient production strategy was introduced for fungal laccase, and the obtained CGLac presented great enzymatic properties and catalytic potential in the removal of phenolic pollutants.

Pomelo peels and wheat bran are great nutritional sources and laccase inducers.

CGLac showed the spectral characteristic of yellow laccase.

CGLac had great stability and catalytic ability for phenolic pollutants removal.

Degradation and Detoxification of Chlorophenols with Different Structure by LAC-4 Laccase Purified from White-Rot Fungus Ganoderma lucidum

A laccase named LAC-4 was purified from Ganoderma lucidum. Firstly, the enzymatic properties of purified LAC-4 laccase, and the degradation of three chlorophenol pollutants 2,6-dichlorophenol (2,6-DCP), 2,3,6-trichlorophenol (2,3,6-TCP) and 3-chlorophenol (3-CP) by LAC-4 were systematically studied. LAC-4 had a strong ability for 2,6-DCP and 2,3,6-TCP degradation. The degradation ability of LAC-4 to 3-CP was significantly lower than that of 2,6-DCP and 2,3,6-TCP. LAC-4 also had a good degradation effect on the chlorophenol mixture (2,6-DCP + 2,3,6-TCP). The results of kinetics of degradation of chlorophenols by LAC-4 suggested that the affinity of LAC-4 for 2,6-DCP was higher than 2,3,6-TCP. The catalytic efficiency and the catalytic rate of LAC-4 on 2,6-DCP were also significantly higher than 2,3,6-TCP. During degradation of 2,6-DCP and 2,3,6-TCP, LAC-4 had a strong tolerance for high concentrations of different metal salts (such as MnSO₄, ZnSO₄, Na₂SO₄, MgSO₄, CuSO₄, K₂SO₄) and organic solvents (such as ethylene glycol and glycerol). Next, detoxification of chlorophenols by LAC-4 was also systematically explored. LAC-4 treatment had a strong detoxification ability and a good detoxification effect on the phytotoxicity of individual chlorophenols (2,6-DCP, 2,3,6-TCP) and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP). The phytotoxicities of 2,6-DCP, 2,3,6-TCP and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP) treated with LAC-4 were considerably reduced or eliminated. Finally, we focused on the degradation mechanisms and pathways of 2,6-DCP and 2,3,6-TCP degradation by LAC-4. The putative transformation pathway of 2,6-DCP and 2,3,6-TCP catalyzed by laccase was revealed for the first time. The free radicals formed by LAC-4 oxidation of 2,6-DCP and 2,3,6-TCP produced dimers through polymerization. LAC-4 catalyzed the polymerization of 2,6-DCP and 2,3,6-TCP, forming dimer products. LAC-4 catalyzed 2,6-DCP into two main products: 2,6-dichloro-4-(2,6-dichlorophenoxy) phenol and 3,3′,5,5′-tetrachloro-4,4′-dihydroxybiphenyl. LAC-4 catalyzed 2,3,6-TCP into two main products: 2,3,6-trichloro-4-(2,3,6-trichlorophenoxy) phenol and 2,2′,3,3′,5,5′-hexachloro-[1,1′-biphenyl]-4,4′-diol.

Fungal Enzymes Involved in Plastics Biodegradation

Plastic pollution is a growing environmental problem, in part due to the extremely stable and durable nature of this polymer. As recycling does not provide a complete solution, research has been focusing on alternative ways of degrading plastic. Fungi provide a wide array of enzymes specialized in the degradation of recalcitrant substances and are very promising candidates in the field of plastic degradation. This review examines the present literature for different fungal enzymes involved in plastic degradation, describing their characteristics, efficacy and biotechnological applications. Fungal laccases and peroxidases, generally used by fungi to degrade lignin, show good results in degrading polyethylene (PE) and polyvinyl chloride (PVC), while esterases such as cutinases and lipases were successfully used to degrade polyethylene terephthalate (PET) and polyurethane (PUR). Good results were also obtained on PUR by fungal proteases and ureases. All these enzymes were isolated from many different fungi, from both Basidiomycetes and Ascomycetes, and have shown remarkable efficiency in plastic biodegradation under laboratory conditions. Therefore, future research should focus on the interactions between the genes, proteins, metabolites and environmental conditions involved in the processes. Further steps such as the improvement in catalytic efficiency and genetic engineering could lead these enzymes to become biotechnological applications in the field of plastic degradation.

Elimination and detoxification of phenanthrene assisted by a laccase from halophile Alkalibacillus almallahensis

Phenanthrene (Phe), a tricyclic Polycyclic Aromatic Hydrocarbon (PAH), is found in high concentrations as a pollutant in various environments. In this study, the removal or (oxidizing) ability of Phe by a laccase from Alkalibacillus almallahensis was investigated. The laccase (12 U mL-1) was able to remove 63% of Phe (50 mg L-1) under optimal conditions of 40 °C, pH 8, 1.5 M NaCl and in the presence of 1 mM HBT as a laccase mediator after a 72 h incubation period. The results for the effect of different solvents, ionic and non-ionic surfactants on the activity of the halophilic laccase towards Phe showed that the addition of these compounds increase removal efficiency and complete enzymatic removal of Phe will achieve in a solution of 5% (v/v) acetone and 1.5% tween 80. The kinetic parameters K m and V max of laccase-catalyzed removal of the substrate were determined as 0.544 mM and 0.882 µmol h-1 mg-1, respectively. A microtoxicity study with respect to the inhibition of algal growth showed a decrease in toxicity of the laccase-treated Phe solution.

Vinasse odyssey: sugarcane vinasse remediation and laccase production by Trametes sp. immobilized in polyurethane foam

Vinasse is a high pollutant liquid residue from bioethanol production. Due to its toxicity, most vinasse is used not disposed of in water bodies but employed for the fertigation of sugarcane crops, potentially leading to soil salinization or heavy metal deposition. The anaerobic digestion of vinasse for energy production is the main alternative to fertigation, but the process cannot eliminate colored compounds such as melanoidins, caramels, or phenolic compounds. The treatment of raw vinasse with white-rot fungi could remove colored and persistent toxic compounds, but is generally considered cost-ineffective. We report the treatment of vinasse by an autochthonous Trametes sp. strain immobilized in polyurethane foam and the concomitant production of high titers of laccase, a high value-added product that could improve the viability of the process. The reuse of the immobilized biomass and the discoloration of raw vinasse, the concentration of phenolic compounds, BOD and COD, and the phytotoxicity of the treated vinasse were measured to assess the viability of the process and the potential use of treated vinasse in fertigation or as a complementary treatment to anaerobic digestion. Under optimal conditions (vinasse 0.25X, 30 °C, 21 days incubation, 2% glucose added in the implantation stage), immobilized Trametes sp. causes a decrease of 75% in vinasse color and total phenolic compounds, reaching 1082 U L^-1 of laccase. The fungi could be used to treat 0.50X vinasse (BOD 44,400 mg O₂ L^-1), causing a 26% decolorization and a 30% removal of phenolic compounds after 21 days of treatment with maximum laccase titers of 112 U L^-1, while reducing COD and BOD from 103,290 to 42,500 mg O₂ L^-1 (59%) and from 44,440 to 21,230 mg O₂ L^-1 (52%), respectively. The re-utilization of immobilized biomass to treat 0.50X vinasse proved to be successful, leading to the production of 361 U L^-1 of laccase with 77% decolorization, 61% degradation of phenolic compounds, and the reduction of COD and BOD by 75% and 80%, respectively. Trametes sp. also reduced vinasse phytotoxicity to Lactuca sativa seedlings. The obtained results show that the aerobic treatment of vinasse by immobilized Trametes sp. is an interesting technology that could be employed as a sole treatment for the bioremediation of vinasse, with the concomitant the production of laccase. Alternatively, the methodology could be used in combination with anaerobic digestion to achieve greater decolorization and reduction of phenolic compounds, melanoidins, and organic load.

Laccases and Tyrosinases in Organic Synthesis

Laccases (Lac) and tyrosinases (TYR) are mild oxidants with a great potential in research and industry. In this work, we review recent advances in their use in organic synthesis. We summarize recent examples of Lac-catalyzed oxidation, homocoupling and heterocoupling, and TYR-catalyzed ortho-hydroxylation of phenols. We highlight the combination of Lac and TYR with other enzymes or chemical catalysts. We also point out the biological and pharmaceutical potential of the products, such as dimers of piceid, lignols, isorhamnetin, rutin, caffeic acid, 4-hydroxychalcones, thiols, hybrid antibiotics, benzimidazoles, benzothiazoles, pyrimidine derivatives, hydroxytyrosols, alkylcatechols, halocatechols, or dihydrocaffeoyl esters, etc. These products include radical scavengers; antibacterial, antiviral, and antitumor compounds; and building blocks for bioactive compounds and drugs. We summarize the available enzyme sources and discuss the scalability of their use in organic synthesis. In conclusion, we assume that the intensive use of laccases and tyrosinases in organic synthesis will yield new bioactive compounds and, in the long-term, reduce the environmental impact of industrial organic chemistry.

Suppression mechanism of model humic constituents on laccase-enabled 17β-estradiol oxidation and oligomerization

Humic constituents (HCs) are ubiquitous in the aquatic ecosystems, and contain various functional groups that seriously impact the conversion of 17β-estradiol (17β-E2) by fungal laccase. The purpose of this study was to explore the influencing mechanism of HCs on Trametes versicolor laccase-enabled 17β-E2 oxidation and oligomerization. Herein, T. versicolor-secreted laccase could rapidly convert 99.2% of 17β-E2 (rate constant = 3.7 × 10^-2 min^-1, half-life = 18.7 min) into multifarious oligomers at 25 °C and pH 5.0, by phenolic radical-caused C-C and/or C-O self-linking routes, whereas HCs with O-phenolic hydroxyl groups (O-p-OH, i.e., catechol, pyrogallol, gallic acid, and caffeic acid) dramatically suppressed 17β-E2 oligomerization. Compared with HC-free, 17β-E2 rate constants weakened 6.3-15.8 fold in the presence of HCs containing O-p-OH. It is largely because the O-p-OH was preferentially oxidized by T. versicolor laccase to create the electrophilic O-quinone monomers/oligomers. These unstable reactive O-quinone intermediates strongly reversed 17β-E2 phenolic radicals to their monomeric molecules via two proton-transfer versus two electron-transfer channels, thus intercepting 17β-E2 oxidation and oligomerization. These findings highlight new insights into the effect of HCs containing O-p-OH on T. versicolor laccase-started 17β-E2 conversion, which is beneficial to re-understanding the fate and geochemical behavior of 17β-E2 in water.

Publication trends of somatic mutation and recombination tests research: a bibliometric analysis (1984‒2020)

Human exposure to pollutants has been on the rise. Thus, researchers have been focused on understanding the effect of these compounds on human health, especially on the genetic information by using various tests, among them the somatic mutation and recombination tests (SMARTs). It is a sensitive and accurate method applicable to genotoxicity analysis. Here, a comprehensive bibliometric analysis of SMART assays in genotoxicity studies was performed to assess publication trends of this field. Data were extracted from the Web of Science database and analyzed by the bibliometric tools HistCite, Biblioshiny (RStudio), VOSViewer, and CiteSpace. Results have shown an increase in the last 10 years in terms of publication. A total of 392 records were published in 96 sources mainly from Brazil, Spain, and Turkey. Research collaboration networks between countries and authors were performed. Based on document co-citation, five large research clusters were identified and analyzed. The youngest research frontier emphasized on nanoparticles. With this study, how research trends evolve over years was demonstrated. Thus, international collaboration could be enhanced, and a promising field could be developed.

Degradation and Detection of Endocrine Disruptors by Laccase-Mimetic Polyoxometalates

Endocrine disruptors are newly identified water contaminants and immediately caught worldwide concern. An effort has been made to degrade endocrine disruptors in the water body by relying on laccase-assisted approaches, including laccase-mediated catalytic systems, immobilized laccase catalytic systems, and nano-catalytic systems based on atypical protein enzymes. Analogous to laccases, polyoxometalates (POMs) have a similar size as these enzymes. They are also capable of using oxygen as an electron acceptor, which could assist the removal of endocrine disruptors in water. This perspective begins with a brief introduction to endocrine disruptors and laccases, summarizes current approaches employing laccases, and focuses on the nano-catalytic systems that mimic the function of laccases. Among the inorganic nanoparticles, POMs meet the design requirements and are easy for large-scale production. The catalytic performance of POMs in water treatment is highlighted, and an example of using polyoxovanadates for endocrine disruptor degradation is given at the end of this perspective. Exploring laccase-mimetic POMs will give key insights into the degradation of emergent water contaminants.

Role of Plasmid in Pesticide Degradation and Metal Tolerance in Two Plant Growth-Promoting Rhizobacteria Bacillus cereus (NCIM 5557) and Bacillus safensis (NCIM 5558)

Disha A (Bacillus cereus) and Disha B (Bacillus safensis) were isolated from pesticide-infested agricultural field and showed tolerance against pesticides, heavy metals, and antibiotics. The isolates exhibited PGPR activities in vitro as well as in field conditions in lentil (Lens culinaris) and cow pea (Vigna unguiculata). Both the Bacillus species could not be grown in mineral salt medium but efficiently grown in the media supplemented with pesticide (imidacloprid/carbendazim) demonstrating the utilization of pesticide as carbon/nitrogen source. The HPLC studies exhibited the pesticide (imidacloprid/carbendazim) degradation by both the bacteria. B. safensis showed better degradation of carbendazim (88.93%) and imidacloprid (82.48%) than that of B. cereus 78.07% and 49.12%, respectively. The bacterial isolates showed high concentration of heavy metal tolerance viz. lead, molybdenum, cadmium, copper, cobalt, and zinc, except mercury. Both the bacteria possessed single plasmid. The plasmid-cured isolates of B. cereus did not tolerate any pesticide, whereas that of B. safensis tolerated all the pesticides, like wild strains. The plasmid curing experiments did not affect the heavy metal tolerance ability of both the bacteria indicating the genomic nature of heavy metal tolerance genes, whereas pesticide resistance genes are plasmid-dependent in B. cereus but genomic in B. safensis.

Recent Advances in the Development of Laccase-Based Biosensors via Nano-Immobilization Techniques

Monitoring phenolic compounds is critical in the environmental, food, and medical sectors. Among many recent advanced detection platforms, laccase-based biosensing platforms gave very rapid, effective, online, and in situ sensing of phenolic compounds. In laccase-based biosensors, laccase immobilization techniques have a vital role. However, a detailing of the advancements in laccase immobilization techniques employed in laccase-based biosensors is lacking in the literature. Thus, in this review, we assessed how the nano-immobilization techniques shaped the laccase biosensing platforms. We discussed novel developments in laccase immobilization techniques such as entrapment, adsorption, cross-linking, and covalent over new nanocomposites in laccase biosensors. We made a comprehensive assessment based on the current literature for future perspectives of nano-immobilized laccase biosensors. We found the important key areas toward which future laccase biosensor research seems to be heading. These include 1. A focus on the development of multi-layer laccase over electrode surface, 2. The need to utilize more covalent immobilization routes, as they change the laccase specificity toward phenolic compounds, 3. The advancement in polymeric matrices with electroconductive properties, and 4. novel entrapment techniques like biomineralization using laccase molecules. Thus, in this review, we provided a detailed account of immobilization in laccase biosensors and their feasibility in the future for the development of highly specific laccase biosensors in industrial, medicinal, food, and environmental applications.

Biochar application for the remediation of trace metals in contaminated soils: Implications for stress tolerance and crop production

In modern agriculture and globalization, the release of trace metals from manufacturing effluents hinders crop productivity by polluting the atmosphere and degrading food quality. Sustaining food safety in polluted soils is critical to ensure global food demands. This review describes the negative effects of trace metals stress on plant growth, physiology, and yield. Furthermore, also explains the potential of biochar in the remediation of trace metal's contaminations in plants by adoption of various mechanisms such as reduction, ion exchange, electrostatic forces of attraction, precipitation, and complexation. Biochar application enhances the overall productivity, accumulation of biomass, and photosynthetic activity of plants through the regulation of various biochemical and physiological mechanisms of plants cultivated under trace metals contaminated soil. Moreover, biochar scavenges the formation of reactive oxygen species, by activating antioxidant enzyme production i.e., ascorbate peroxidase, catalase, superoxide dismutase, peroxidase, etc. The application of biochar also improves the synthesis of stressed proteins and proline contents in plants thus maintaining the osmoprotectant and osmotic potential of the plant under contaminates stress. Integrated application of biochar with other amendments i.e., microorganisms and plant nutrients to improve trace metal remediation potential of biochar and improving crop production was also highlighted in this review. Moreover, future research needs regarding the application of biochar have also been addressed.

Medicines as an emergent contaminant: the review of microbial biodegration potential

Emerging environmental contaminants, such as medicine waste, are of great concern to the scientific community and to the local environmental and health departments because of their potential long-term effects and ecotoxicological risk. Besides the prolonged use of medicines for the development of modern society, the elucidation of their effect on the ecosystem is relatively recent. Medicine waste and its metabolites can, for instance, cause alterations in microbial dynamics and disturb fish behavior. Bioremediation is an efficient and eco-friendly technology that appears as a suitable alternative to conventional methods of water waste and sludge treatment and has the capacity to remove or reduce the presence of emerging contaminants. Thus, this review has the objective of compiling information on environmental contamination by common medicines and their microbial biodegradation, focusing on five therapeutic classes: analgesics, antibiotics, antidepressants, non-steroidal anti-inflammatory drugs (NSAIDs), and contraceptives. Their effects in the environment will also be analyzed, as well as the possible routes of degradation by microorganisms.

Biocatalytic membranes for combating the challenges of membrane fouling and micropollutants in water purification: A review

Over the last few years, the list of water contaminants has grown tremendously due to many anthropogenic activities. Various conventional technologies are available for water and wastewater treatment. However, micropollutants of emerging concern (MEC) are posing a great threat due to their activity at trace concentration and poor removal efficiency by the conventional treatment processes. Advanced technology like membrane technology can remove MEC to some extent. However, issues like the different chemical properties of MEC, selectivity, and fouling of membranes can affect the removal efficiency. Moreover, the concentrate from the membrane filtration may need further treatment. Enzymatic degradation of pollutants and foulants is one of the green approaches for removing various contaminants from the water as well as mitigating membrane fouling. Biocatalytic membranes (BCMs), in which enzymes are immobilized on membranes, combines the advantages of membrane separation and enzymatic degradation. This review article discussed various commonly used enzymes in BCMs for removing MEC and fouling. The majorly used enzymes were oxidoreductases and hydrolases for removing MEC, antifouling, and self-cleaning ability. The various BCM synthesis processes based on entrapment, crosslinking, and binding have been summarized, along with the effects of the addition of the nanoparticles on the performances of the BCMs. The scale-up, commercial viability, challenges, and future direction for improving BCMs have been discussed and shown bright possibilities for these new generation membranes.

Extracellular laccase-activated humification of phenolic pollutants and its application in plant growth

Humification processes of phenolic pollutants may play a profound role in environment purification and plant growth. However, little literature is performed to explore exoenzyme-driven humification to polymerize 17β-estradiol (E2) and humic constituents (HCs), and the effects of their polymeric precipitates on plant growth are usually overlooked. Herein, E2 conversion and radish (Raphanus sativus L.) growth were systematically investigated under humification mediated by extracellular laccase (EL) of Trametes versicolor. Results disclosed that EL-assisted humification achieved a wonderful E2 conversion efficiency (>99%) within 2-h, but the presence of HCs such as humic acid (HA), vanillic acid (VA), and ferulic acid (FA) impeded E2 elimination significantly. Compared with HC-free, the kinetics constants declined by 2.84-, 5.72-, and 5.22-fold with HA, VA, and FA present, respectively. Intriguingly, three close-knit self/cross-linked precipitates (i.e., E2-HA, E2-VA, and E2-FA hybrid precipitates) in dark gray, dark brown, and deep yellow were created after a continuous humification by phenolic radical-initiated polymerization mechanisms. The formation of these humified precipitates was extremely effective on circumventing phytotoxicity caused by monomeric E2, VA, or FA. Furthermore, they acted as humic-like organic fertilizers, accelerating seed germination, root elongation, and enhancing NaCl-tolerance of radish through the combination of oxygen-contained functional components and auxin structural analogues with unstable and stubborn carbon skeletons. This is the first study reporting the pollution purification and plant growth promotion in EL-activated humification. Our findings frame valuable perspectives regarding the natural detoxification and carbon sequestration of phenolic pollutants and the application of their polymeric precipitates in global crop production.

Improved performance of immobilized laccase for catalytic degradation of synthetic dyes using redox mediators

Laccase is an important biodegradation agent as the catalytic degradation could be enhanced in the presence of redox mediators. This work aims to improve removal performance of the immobilized laccase...

Occurrence, environmental fate, ecological issues, and redefining of endocrine disruptive estrogens in water resources

The growing persistence of estrogenic pollutants in water resources is a worrying concern because of their endocrine disrupting activities and potentially hazardous consequences on the environmental matrices, ecology, and human health, even at low concentration. The long-term persistence of steroidal estrogens leads to their bioaccumulation in aquatic organisms that can further reach to humans via food chain route. Considering the toxicity of steroidal estrogens, it is important to mitigate these environmentally related hazardous contaminants. So far, several treatment methods, like adsorption, oxidation, irradiation, and electrochemical techniques have been proposed to eliminate estrogens from aqueous ecosystems. Nevertheless, high operational costs, insufficient removal, generation of toxic sludge, and the necessity of skilled maintenance and operating workers are the major hindrances associated with large scale applications. Bioremediation of steroidal estrogens using enzyme-based biocatalytic system has recently emerged as a promising alternative to remove and bio-transform estrogens from aqueous systems. However, the current literature lacks a critique focusing specifically and comprehensively on steroidal estrogens. The presented review is a critical assessment of the existing literature on steroid-based endocrine disruptive estrogens. A detailed description about the occurrence and eco-fate of steroidal estrogens is given with representative examples. The later half of the review stresses on the redefining (removal) of endocrine disruptive estrogens in water resources with particular reference to enzyme-based approaches.