Assessment of single extraction methods for the prediction of bioavailability of metals to Brassica juncea L. Czern. (var. Vaibhav) grown on tannery waste contaminated soil

Pollution Status and Associated Risk Assessment of Heavy Metals in Sewage Sludge in the Yangtze River Delta, China

The risk assessment of heavy metals (HMs) in sewage sludge (SS) is essential before land application. Six HMs in nineteen SS collected in the Yangtze River Delta were analyzed to assess risks to environment, ecosystem, and human health. HMs concentrations were ranked in the order of Zn > Cu > Cr > Ni > Pb > Cd, with Cu, Zn, and Ni in a total of 16% of samples exceeding the legal standard. Zn showed greatest extractability according to EDTA-extractable concentrations. HMs in 16% of SS samples posed heavy contamination to the environment with Zn as the major pollutant. HMs in 26% of samples posed ecological risk to the ecosystem and Cd was the highest risky HM. The probabilistic health risk assessment revealed that HMs posed carcinogenic risks to all populations, but non-carcinogenic risks only to children. This work will provide fundamental information for land application of SS in this area.

Advancing herbal medicine: enhancing product quality and safety through robust quality control practices

This manuscript provides an in-depth review of the significance of quality control in herbal medication products, focusing on its role in maintaining efficiency and safety. With a historical foundation in traditional medicine systems, herbal remedies have gained widespread popularity as natural alternatives to conventional treatments. However, the increasing demand for these products necessitates stringent quality control measures to ensure consistency and safety. This comprehensive review explores the importance of quality control methods in monitoring various aspects of herbal product development, manufacturing, and distribution. Emphasizing the need for standardized processes, the manuscript delves into the detection and prevention of contaminants, the authentication of herbal ingredients, and the adherence to regulatory standards. Additionally, it highlights the integration of traditional knowledge and modern scientific approaches in achieving optimal quality control outcomes. By emphasizing the role of quality control in herbal medicine, this manuscript contributes to promoting consumer trust, safeguarding public health, and fostering the responsible use of herbal medication products.

Mitigating Cd and bacterial wilt stress in tomato plants through trico-synthesized silicon nanoparticles and Trichoderma metabolites

There has been a growing apprehension in recent years about the harmful effects of environmental pollutants on agricultural output, encompassing both living organisms and non-living factors that cause stress. In this study, the soil application of bulk silicon (Si), silicon nanoparticles (SiNPs) and Trichoderma metabolites (TM) were investigated alone or in combination for the management of an important abiotic stress i.e. Cd toxicity and biotic stress i.e. bacterial wilt (BW) in tomato plants. SiNPs were synthesized by Trichoderma and confirmed through XRD, FTIR, and Ranman spectrum analysis. Results showed that Si, SiNPs and TM were all effective treatments. The combine treatment of SiNPs and TM followed by SiNPs alone were superior over other treatments in mitigating Cd toxicity and reducing BW disease on tomato plants. The soil application of these treatments reduced the Cd toxicity by enhancing Cd-tolerance index, decreasing bioavailability of soil Cd, reducing Cd contents and translocation in plants, improving gaseous exchange, photosynthesis, and increasing the antioxidant enzyme activities and their transcriptions. These treatments significantly suppressed BW pathogen leading to the significant decrease in disease index and severity on plants. In vitro evaluation and scanning electron microscopic (SEM) analysis revealed that SiNPs and TM significantly disrupted the cellular morphology of BW pathogen Ralstonia solanacearum. Findings of this study proposes the possible use of SiNPs and TM in mitigating the Cd and BW stress in tomato plants and possibly in other crops.

Mobility indexes of Cu, Pb, and Zn in soil ecosystems with various levels of metal contamination (in Poland)

The aim of the study was to investigate and compare the soils of three groups of grassland ecosystems with varying degrees of heavy metal (Cu, Pb, and Zn) pollution as well as estimating of mobility on the basis of calculated mobility indexes (MI) expressed as a percentage of the EDTA-extracted forms of metals in their total content. A total of 55 surface soil samples were collected from various areas of Poland: urban soils, rural soils, and soils along communication routes. Heavy metal concentrations were determined in solutions after wet mineralization (using a mixture of acids) by atomic absorption spectrometry (AAS) with flame atomization. To isolate the mobile forms of metals in soils, a one-step extraction method was used with 0.05-M EDTA solution. The ranges of Cu, Pb, and Zn concentrations in soils were varied, respectively: 6.7-47.6, 61.1-563.9, and 86.4-644.5 mg·kg^-1 (A); 5.7-39.8, 13.56-45.71, and 16.3-119.6 mg·kg^-1 (B); and 1.0-195.8, 19.2-310.2, and 27.4-894.1 mg·kg^-1 (C). The average values of mobility indexes of Cu, Pb, and Zn were at the level of 40.9, 33.5, and 22.2% (A); 23.2, 27.1, and 25.9% (B); and 37.5, 34.3, and 30.7% (C). Studies have shown that metals derived from anthropogenic sources are characterized by greater mobility compared to metals of natural origin (lithological associated with the ground). The inclusion of metal mobility indices in the environmental monitoring strategy may minimize errors in assessing the actual risk associated with the potential uptake of these metals by plants and incorporation into circulation.

Burkholderia cepacia CS8 improves phytoremediation potential of Calendula officinalis for tannery solid waste polluted soil

Microbes have shown potential for the bioremediation of tannery waste polluted soil. During our previous study, it was observed that heavy metal resistant Burkholderia cepacia CS8 augmented growth and phytoremediation capability of an ornamental plant. Objective of the present research work was to evaluate the capability of B. cepacia CS8 assisted Calendula officinalis plants for the phytoremediation of tannery solid waste (TSW) polluted soil. The TSW treatment significantly reduced growth attributes and photosynthetic pigments in C. officinalis. However, supplementation of B. cepacia CS8 which exhibited substantial tolerance to the TSW amended soil, augmented growth traits, carotenoid, proline, and antioxidant enzymes level in C. officinalis under toxic and nontoxic regimes. Inoculation of B. cepacia CS8 augmented plant growth (shoot length 13%, root length 11%), physiological attributes (chlorophyll a 14%, chlorophyll b 17%), antioxidant enzyme activities (peroxidase 24%, superoxide dismutase 31% and catalase 19%), improved proline 36%, phenol 32%, flavonoids 14% and declined malondialdehyde (MDA) content 15% and hydrogen peroxide (H2O2) level 12% in C. officinalis at TSW10 stress compared with relevant un-inoculated plants of TSW10 treatment. Moreover, B. cepacia CS8 application enhanced labile metals in soil and subsequent metal uptake, such as Cr 19%, Cd 22%, Ni 35%, Fe 18%, Cu 21%, Pb 34%, and Zn 30%, respectively in C. officinalis plants subjected to TSW10 stress than that of analogous un-inoculated treatment. Higher plant stress tolerance and improved phytoremediation potential through microbial inoculation will assist in the retrieval of agricultural land in addition to the renewal of native vegetation.

The geochemical and mineralogical controls on the release characteristics of potentially toxic elements from lead/zinc (Pb/Zn) mine tailings

Large quantities of lead/zinc (Pb/Zn) mine tailings were deposited at tailings impoundments without proper management, which have posed considerable risks to the local ecosystem and residents in mining areas worldwide. Therefore, the geochemical behaviors of potentially toxic elements (PTEs) in tailings were in-depth investigated in this study by a coupled use of batch kinetic tests, statistical analysis and mineralogical characterization. The results indicated that among these studied PTEs, Cd concentration fluctuated within a wide range of 0.83-6.91 mg/kg, and showed the highest spatial heterogeneity. The mean Cd concentrations generally increased with depth. Cd were mainly partitioned in the exchangeable and carbonate fractions. The release potential of PTEs from tailings was ranged as: Cd > Mn > Zn > Pb > As, Cd > Pb > Zn > Mn > As and Cd > Pb > Mn > Zn > As, respectively, under the assumed environmental scenarios, i.e. acid rain, vegetation restoration, human gastrointestinal digestion. The results from mineralogical characterization indicated that quartz, sericite, calcite and pyrite were typical minerals, cumulatively accounting for over 80% of the tailings. Sulfides (arsenopyrite, galena, and sphalerite), carbonates (calcite, dolomite, cerussite and kutnahorite), oxides (limonite) were identified as the most relevant PTEs-bearing phases, which significantly contributed to PTEs release from tailings. A combined result of statistical, geochemical and mineralogical approaches would be provided valuable information for the alteration characteristics and contaminant release of Pb/Zn mine tailings.

Phytotoxicity effect concentrations (ECx) for Ce, Nd and Eu added to soil relative to total and bioaccessible soil REE concentrations, and tissue REE accumulations

Toxicity thresholds (EC_x) for radish, tomato, and durum wheat growth endpoints (shoot length, shoot mass, root length) to Ce, Nd or Eu added to a black organic soil were determined from 14-day dose-response growth assays. EC₁₀ expressed as total soil [REE] had a more than twenty-fold range, from 337 mg/kg to more than >8000 mg/kg. Averaged over all REEs and endpoints, durum wheat was more tolerant than radish and tomato; and averaged over all endpoints, Eu appeared to be the most phytotoxic of the three REEs. Bioaccessibility of each REE was determined by extraction with 0.01 M CaCl₂, which for all three REEs in this soil was quite low, <0.10% of total. However, bioaccessibility of Eu was five or six times greater than that for Ce and Nd, and thus could explain its apparently greater toxicity, namely that Eu was more likely to be accumulated at the site of toxic action in the plant. To discern inherent toxicity from enhanced bioaccumulation, concentration of each REE in root and shoot tissues was determined, for a tissue-residue approach to toxicity assessment. The EC₁₀ expressed as tissue concentration was lower for Nd than for Ce and Eu, thus the most toxic of the three REEs. As for many cationic inorganic elements, toxicity varies with the chemistry of the exposure medium due to its effects on bioaccessibility. Simple methods to harmonize toxicity thresholds from different media enables greater integration into regulatory standards. When EC₂₅ from this and other studies were normalized to CaCl₂-extractable REE in their respective media, the range in Ce EC₂₅ was reduced from 20-fold to 2.5-fold, and the range for Eu EC₂₅ was reduced from 25-fold to 3-fold. This novel and low-input approach to meta-analysis of toxicity thresholds demonstrates the value of considering soil physico-chemical properties as modifiers of soil REE toxicity.

Nano-Fe2O3 as a tool to restore plant growth in contaminated soils - Assessment of potentially toxic elements (bio)availability and redox homeostasis in Hordeum vulgare L

This work aimed to evaluate the potential of Fe₂O₃ nanoparticles (nano-Fe₂O₃) to alleviate potentially toxic elements (PTEs) - induced stress in barley plants (Hordeum vulgare L.), focusing on bioaccumulation patterns and on plant growth and redox homeostasis. To achieve this goal, plants grew in two agricultural soils, contaminated by different levels of PTEs, collected from an industrial area, previously amended, or not, with 1% (w/w) nano-Fe₂O₃. After 14 d of growth, biometric parameters were evaluated, along with the analysis of PTEs bioaccumulation and biochemical endpoints. After exposure to contaminated soils, plant development was greatly affected, as evidenced by significant decreases in root length and biomass production. However, upon co-treatment with nano-Fe₂O₃, lower inhibitory effects on biometric parameters were observed. Regarding the oxidative damage, both soils led to increases in lipid peroxidation and superoxide anion concentration, though hydrogen peroxide levels were only increased in the most contaminated soil. In general, these changes in the oxidative stress markers were accompanied by an upregulation of different antioxidant mechanisms, whose efficiency was even more powerful upon soil amendment with nano-Fe₂O₃, thus lowering PTEs-induced oxidative damage. Altogether, the present study revealed that nano-Fe₂O₃ can protect the growth of barley plants under contaminated soils.

DGT methodology is more sensitive than conventional extraction strategies in assessing amendment-induced soil cadmium availability to rice

Using diffusive gradients in thin films (DGT) is a recently developed alternative method of rapidly evaluating the bioavailability of metals in soil. However, the method has found only limited application in systematic assessment of the bioavailability of cadmium (Cd) in red limestone paddy soils treated with different soil amendments. Of the four methods compared for estimating Cd content of rice grains from plants grown in such soils of central China treated with eleven different soil amendments in pot culture, Cd content of DGT-labile soil was significantly correlated to Cd concentrations in brown rice (R = 0.447, p < 0.01). The other three methods involved CaCl₂, diethylenetriaminepentaacetic acid (DTPA), or NH₄NO₃. Some other properties of soil, such as pH, redox potential, content of dissolved organic matter, and cation exchange capacity were also determined. A simple algorithm developed to evaluate the sensitivity of the four methods also confirmed DGT as the most efficient method to predict the bioavailability of Cd in red limestone paddy soils.

A Field Evidence of Cd, Zn and Cu Accumulation in Soil and Rice Grains after Long-Term (27 Years) Application of Swine and Green Manures in a Paddy Soil

Although inorganic and organic manures with high concentrations of heavy metals can lead to accumulation or contamination of heavy metals in soils, there are few reports on the effects of long-term application of swine and green manures on the accumulation of heavy metals in rice grains in paddy soils. A long-term field experiment, which was established in 1990 in paddy soil in Hangzhou, China, was used to investigate the effects of inorganic and organic manures on the availability and accumulation of heavy metals in soil and uptake by rice plant. The results showed that long-term application of nitrogen, phosphorus and potash (NPK) plus green manure or swine manure, and swine manure only increased 202%, 146%, and 100% for total Cd, and 5.5%, 7.6%, and 6.6% for total Cu in rice grains, respectively compared to the control without fertilization. Total Zn in rice grain was significantly increased by 13.9% for the treatment of NPK plus green manure. The accumulation of Cd, Zn, and Cu in rice grains after long-term application of swine and green manures is due to the combined effects of the increased concentrations of total and EDTA extractable Cd, Zn, and Cu in soil and the changes of soil properties. Furthermore, the highest bioconcentration factor for Cd was found in the treatment of NPK plus green manure while for Zn and Cu it was observed in NPK treatment. Thus, it may be concluded that green manure and manure with increased Cd, Zn, and Cu in rice grain results in a potential risk of metal accumulation in paddy soils.

Biomass allocation strategies and Pb-enrichment characteristics of six dwarf bamboos under soil Pb stress

Dwarf bamboos are clonal plants with potential applications in the remediation of heavy metal-polluted soils, although their pollution adaptation strategies are unknown. This study examined the biomass allocation strategies and lead (Pb) enrichment characteristics of various dwarf bamboo tissues by the end of the growing season and explored their potential for phytoremediation of Pb stress in the soils. Six dwarf bamboo genotypes were treated with three levels (0, 300, and 1500 mg kg^-1) of soil Pb stress. The majority of the bamboos adopted two biomass allocation strategies to adapt to Pb stress, namely, "reducing biomass allocation into new bamboo growth" and "increasing/stabilizing biomass allocation into rhizomes". Pb accumulation was highest in the roots, rhizomes, and old stems and showed the following trend: rhizomes/old stems> new roots/old roots> old leaves> new leaves> new stems among various tissues. Moreover, the six bamboos used three different Pb-enrichment strategies, as follows: (i) "rhizome domination and old stem synergy" (Sasaella glabra (Nakai) f. albo-striata Muroi, Sasa auricoma (Mitford) E.G. Camus, Sasa fortunei (Van Houtte) Fiori, and Shibataea lanceifolia C.H. Hu); (ii) "old stem domination and rhizome synergy" (Indocalamus decorus Q.H. Dai); and (iii) "old stem domination and new root synergy" (Sasa argenteostriata (Regel) E.G. Camus). In Pb-contaminated soils, genotypes with TFs greater than 1 were Sasa fortunei (Van Houtte) Fiori, Sasa argenteostriata (Regel) E.G. Camus, and Indocalamus decorus Q.H. Dai; in addition, only S. argenteostriata had BCF values greater than 1. Furthermore, this study provides the first evidence that S. argenteostriata can extract 0.22 and 0.58 mgplant^-1 of Pb ions in soil polluted with 300 and 1500 mg kg^-1 Pb, respectively. S. argenteostriata showed the greatest potential for phytoremediation among the bamboo genotypes in both Pb-contaminated urban and mining sites.

Comparison of five extraction methods for evaluating cadmium and zinc immobilization in soil

The remediation of soil contaminated with heavy metals is an ongoing environmental concern. Paddy soils contaminated with Cd and Zn were collected from around abandoned metals mines in Korea. Limestone and steel slag were mixed with the collected soil, as amendments for Cd and Zn immobilization. Sequential extraction, lettuce cultivation and five single extraction methods were carried out to assess the effects on Cd and Zn immobilization using amendments. The exchangeable fraction of Cd and Zn was decreased and Fe-Mn oxides fraction increased by stabilization using amendments. In addition, the accumulation of Cd and Zn in lettuce decreased in treated soil and indicated the Cd and Zn immobilization effect in soil by the amendments. The extractable Cd and Zn by CaCl₂ and Mehlich-3 in the untreated soils were higher than that of treated soils, whereas Cd and Zn extraction by ethylenediaminetetraacetic acid (EDTA), diethylene tetramine penta-acetic acid (DTPA) and toxicity characteristic leaching procedure (TCLP) has a small or no difference between the untreated and treated soils. The extraction results by CaCl₂ and Mehlich-3 methods present reasonable results for Cd and Zn immobilization in soil than EDTA, DTPA and TCLP methods. Therefore, the choice of appropriate extraction method is very important when there is the assessment of Cd and Zn immobilization efficiency.

The Effect of Amending Soil with Waste Elemental Sulfur on the Availability of Selected Macroelements and Heavy Metals

Elemental sulfur of waste origin may be a valuable sulfur source for plants. However, assessing the suitability of environmental use of a waste material should confirm there is no harmful effect of the material on soil environment. The purpose of the incubation experiment was to assess the availability of selected elements (P, K, Ca, Mg, Fe, Mn, Zn, Cu, Cr, Ni, Pb, Cd) in soils supplemented with waste elemental sulfur. The research was conducted on two soils: light and heavy, and with three sulfur doses applied to each soil. Available forms of elements in the soils were extracted 60 days after the waste introduction, with three reagents: 0.01 mol L−1 CaCl2, Mehlich 3 and 1 mol L−1 HCl. Additionally, to determine the impact of the introduced sulfur on soil acidification, soil pH was periodically checked during the experiment. The sulfur addition intensified acidification of the light soil, and, to a lesser extent, of the heavy soil. The acidifying effect was stronger when the sulfur dose was higher. The content of available forms of elements in the soils depended mainly on the strength of the used extractants (generally, the highest amounts were extracted with 1 mol L−1 HCl and the lowest with 0.01 mol L−1 CaCl2). The effect of sulfur introduction on element availability was small. No harmful effect on element availability in soils was stated.

Copper and Zn distribution in humic substances of soil after 10 years of pig manure application in south of Santa Catarina, Brazil

This study aims to evaluate available Cu and Zn levels in soil and related in soil organic matter (SOM) fractions (fulvic acids-FA, humic acids-HA, and humins-HU) after 10 years of application of pig slurry (PS) and pig deep litter (PL). Soil samples were collected from an experiment with black oat/corn succession under no-tillage in southern Brazil. The treatments consisted of fertilization of 90 and 180 kg N ha^-1 applied as PS and PL from 2002 to 2012 and a control treatment without any fertilization. SOM chemical fractionation was performed in air-dried samples. Copper and Zn concentrations were analyzed in soil (total, EDTA- and CaCl₂-extracted) and in SOM fractions. The amount of Cu and Zn (in mol) related to each fraction of SOM (Cu/C and Zn/C molar ratios) was established. The applications of PS and PL promoted the accumulation of total and available Cu and Zn, especially in the PL180 treatment. The highest amount of Zn was found with HU, while for Cu both HA and HU were important retention compartments. The highest Cu/C_FA, Cu/C_HA and Cu/C_HU ratios were found with the addition of PL. Increases in Zn/C ratio were found mainly in FA fraction. The high levels of Cu and Zn obtained in the HCl-extracted SOM fraction suggest that a considerable part is bound to SOM and clay minerals with low energy. However, the SOM is an important source of metal adsorption in soils with swine manure application.

Phytoavailability-based threshold values for cadmium in soil for safer crop production

The phytoavailability of heavy metals in soils is important for both food safety and environmental management. Hence soil metal phytoavailability threshold values need to be established based on a firm scientific basis. In this study, optimal Cd phytoavailability threshold values, were determined for bean, rice and sesame cultivated in 100 soils varying widely in soil chemical characteristics by comparing the soil Cd phytoavailability obtained using three commonly used extraction procedures. Subsequently, the transfer functions derived in this study, were used to establish soil Cd phytoavailability threshold value standard limits for each specific crop. In addition, independent experimental data were used to supplement the obtained soil phytoavailable Cd threshold value for rice. Soil phytoavailable Cd concentrations extracted by 1 M NH4NO3, 0.05 M EDTA and Mehlich3 solutions were each more significantly correlated with plant Cd concentrations than total soil Cd concentrations. Thus, the soil Cd phytoavailability threshold values proposed in this study provide a more effective means of ensuring safer agricultural food production. Therefore, it is recommended that current agricultural soil heavy metal management policy; which is based on total concentrations; should be changed to embrace soil metal phytoavailability for safer agricultural food production.

Determination of (Bio)-available mercury in soils: A review

Despite the mercury (Hg) control measures adopted by the international community, Hg still poses a significant risk to ecosystem and human health. This is primarily due to the ability of atmospheric Hg to travel intercontinentally and contaminating terrestrial and aquatic environments far from its natural and anthropogenic point sources. The issue of Hg pollution is further complicated by its unique physicochemical characteristics, most noticeably its multiple chemical forms that vary in their toxicity and environmental mobility. This meant that most of the risk evaluation protocols developed for other metal(loid)s are not suitable for Hg. Soil is a major reservoir of Hg and a key player in its global cycle. To fully assess the risks of soil Hg it is essential to estimate its bioavailability and/or availability which are closely linked to its toxicity. However, the accurate determination of the (bio)-available pools of Hg in soils is problematic, because the terms 'bioavailable' and 'available' are ill-defined. In particular, the term 'bioavailable pool', representing the fraction of Hg that is accessible to living organisms, has been consistently misused by interchanging with other intrinsically different terms e.g. mobile, labile, reactive and soluble pools. A wide array of physical, chemical, biological and isotopic exchange methods were developed to estimate the (bio)-available pools of Hg in soil in an attempt to offer a plausible assessment of its risks. Unfortunately, many of these methods do not mirror the (bio)-available pools of soil Hg and suffer from technical drawbacks. In this review, we discuss advantages and disadvantages of methods that are currently applied to quantify the (bio)-availability of Hg in soils. We recommended the most feasible methods and give suggestions how to improve the determination of (bio)-available Hg in soils.

Cultivar diversity and organ differences of cadmium accumulation in potato (Solanum tuberosum L.) allow the potential for Cd-safe staple food production on contaminated soils

Cadmium (Cd) is a toxic element that can accumulate in plants and poses a threat to human health through biomagnification. There are differences in Cd levels among different plants tissues. Hence, an optimal crop that possesses low Cd levels in the edible parts but high levels in the inedible parts is urgently needed to simultaneously lower soil-Cd levels in contaminated fields and to produce Cd-safe crops. In this study, we investigated the Cd levels in tubers and other tissues of potato (Solanum tuberosum L.) using different experimental approaches, and identified variations in Cd accumulation in different potato cultivars and characterized the Cd-distribution pattern in potato. Our results showed that Cd accumulation in tubers of the tested cultivars varied greatly, and that tuber-Cd levels were much lower than in the stems or leaves. Two-way ANOVA revealed that the tuber-Cd levels in potato are determined by both genotypic differences and the soil-Cd levels of the farmlands. Among the cultivars tested, one cultivar, 'Eshu10', was found to have the lowest tuber-Cd levels but had much higher Cd levels in leaf and stem tissues. Our study shows that the Cd-distribution pattern within potato plants makes it an ideal candidate for the safe production of a staple food that also has the potential to contribute to the remediation of contaminated soils.

An approach to counter sediment toxicity by immobilization of heavy metals using waste fish scale derived biosorbent

The utilization of fish scale-derived biosorbent for immobilization of cadmium and lead in polluted sediment was thoroughly investigated in this study. Fish scale (FS) biomass was chemically and physically treated. The FS biomass treated with acid (0.1 M HCl), alkali (0.1 M NaOH) and hydrothermally, showed minimum removal capacity. While, FS treated hydrothermally along with acid showed the maximum removal efficiency of metal ions. We used different dosages (0%, 2.5%, 5%, 10%, 15%, and 20%) of FS biosorbent in the sediment. Isotherm modelling showed that this biosorbent can hold 89.30 and 92.65 mg/g of Cd and Pb on its surface. This indicated that prepared FS biosorbent has enough potential to adsorb Cd and Pb ions on its surface from the sediment. Compared to the control, sediment treated with 20% FS showed the highest immobilization capacities for Pb (92.9%), and Cd (87.9%). The values of partition coefficient (K_d) increased by 83% for Pb and 78% for Cd, which specified that availability of free ions of Pb and Cd in the aquatic system was successfully decreased. The sediment treated with 20% FS biosorbent showed 70-80% immobilization of Cd and Pb from mobile and exchangeable fractions that ultimately decreased the bioavailability of metal ions to the biota. Inclusively, compared to control, sediment served with 20% FS biosorbent showed higher level of Pb and Cd ions in residual fraction near by 80%. The prepared FS biosorbent had shown its potential in immobilizing the Cd and Pb ions from sediment as a cheap and ecologically feasible method for amendment.

Fractionation of trace metals in coastal sediments from Trinidad and Tobago, West Indies

Sequential extraction was used to determine the geochemical distribution of trace metals in coastal sediments from Trinidad and Tobago. The results showed that there was considerable variation in the bioavailability, mobility and ecological risk of the metals determined. Cadmium had very high ecological risk: 57-88% of cadmium was associated with the exchangeable and carbonate bound metal fraction (F1). Ecological risk decreased in the order manganese> nickel> lead> zinc. Copper had the lowest ecological risk: lowest percentages of copper were associated with F1 (1-15%) and F2 (3-15%), while considerable percentages (48-55%) were associated with the residual fraction. Management of the risks posed by these metals in the marine environment requires a holistic approach including reduction in trace metal inputs from point and non-point sources of pollution, particularly off the west coast of Trinidad, and public education on the impacts of trace metals in the environment and on human health.

Effects of cadmium-resistant plant growth-promoting rhizobacteria and Funneliformis mosseae on the cadmium tolerance of tomato (Lycopersicon esculentum L.)

Microorganisms are used to alleviate heavy metal stress in plants cultivated in contaminated fields. However, the relevant mechanisms have been rarely explored. The goal of this study was to investigate effects of arbuscular mycorrhizal fungus Funneliformis mosseae and two Cd-resistant bacterial strains (Enterobacter sp. EG16 and Enterobacter ludwigii DJ3) on growth and Cd tolerance of tomato when applied with different inoculation strategies (single or dual) and Cd concentrations (50 and 100 mg kg^-1). Better plant growth was observed in mycorrhizal alone or combined treatments. In F. mosseae and EG16 co-inoculation treatment, shoot and root dry weight were 119-154% and 91-173% higher than those of the control, respectively. Higher bacterial and mycorrhizal colonization rate and root Cd concentration were also found in this treatment. However, the decrease of shoot Cd concentration and translocation factor values indicated this treatment was effective in improving Cd tolerance of the host plants. In addition, the increase in soil pH and decline in bioavailable Cd in the rhizosphere might be partly involved in reduction of Cd accumulation in plants. Our results suggest that co-inoculation with suitable microorganisms is important in plant growth and tolerance to Cd in Cd-contaminated soil.

Assessment of EDDS and vermicompost for the phytoextraction of Cd and Pb by sunflower (Helianthus annuus L.)

The effects of Ethylenediamine disuccinic acid (EDDS) (0 and 5 mmol·kg^-1) as a synthetic chemical amendment, vermicompost (0 and 5%w/w) as an organic amendment and their combined application were evaluated for the phytoextraction by sunflower (Helianthus annuus L.) of cadmium (Cd) and lead (Pb) at three artificial contamination levels in soils (0, 50, and 100 mg·kg^-1 for Cd and 0, 100, and 200 mg·kg^-1 for Pb). The results showed that the application of EDDS was the most effective method to increase Pb and Cd concentrations in both parts of the plant. The results also showed that the application of EDDS increased 9.27% shoot Pb content at 200 mg·kg^-1 but decreased 15.95% shoot Cd content at 100 mg·kg^-1 contamination level with respect to the respective controls. The bioavailable concentrations of Cd at 100 mg·kg^-1 and Pb at 200 mg·kg^-1 contamination level in the soil at the end of experiment increased 25% and 26%, respectively after the application of EDDS but vermicompost decreased 43.28% the bioavailable Pb concentration relative to their controls. Vermicompost increased the remediation factor index of Cd, thus making it the best treatment for the phytoextraction of Cd. The combined application of EDDS and vermicompost was the best amendment for Pb phytoextraction.

Structural development and assembly patterns of the root-associated microbiomes during phytoremediation

Successful in situ phytoremediation depends on beneficial interactions between roots and microbes. However, the assembly strategies of root-associated microbiome during phytoremediation are not well known. Here we investigated the assembly patterns of root-associated microbiomes during phytoremediation as well as its regulation by both plants and heavy metals. Plant cultivation and soil amendment increased microbial diversity and restructured microbial communities. Rhizo-compartmentalization was the largest source of variation in root-associated microbiomes, with endosphere being the most independent and exclusive compartment. Soil type explained a larger amount of microbiomes variation in bulk soil and rhizosphere than that in endosphere. A specific core root microbiome was likely to be selected by the metal-tolerant plant H. cannabinus, with Enterobacteriaceae, Pseudomonadaceae and Comamonadaceae which contain a large number of metal-tolerant and plant growth-promoting bacteria (PGPB) being the most abundant families. The root-associated microbial community tended to proceed a niche-assembled patterns and formed a smaller bacterial pool dominant by Proteobacteria, Actinobacteria and Chloroflexi under metal-contaminated conditions. Among these genera, potential metal-tolerant PGPB species have taken up the keystone positions in the microbial co-occurrence networks, revealing their key roles in metal-contaminated environment due to niche selection. We also detected a keystone functional group reducing metal bioavailability which might work as vanguards and devote to maintaining the structure and function of the whole microbial community. In conclusion, this study suggested a specific assembly pattern of root-associated microbiomes of the metal-tolerant plant H. cannabinus during phytoremediation, showing the directional selections of the associated microbiomes by both the plant and metal-contaminated conditions in such a system.

Metal Tolerance Capability of Helichrysum microphyllum Cambess. subsp. tyrrhenicum Bacch., Brullo & Giusso: A Candidate for Phytostabilization in Abandoned Mine Sites

Sardinia was known as an important mine pole in Europe during his history. Still after decades from mine closure, 75.000.000 m³ of mine waste, rich in heavy metals, were left abandoned causing a huge environmental legacy on the mine district area. Consequently, cost effective remediation is required. In this frame, phytoremediation is considered a feasible candidate. This research was focused on Helichrysum microphyllum subsp. tyrrhenicum, which is pioneer in xeric soils with low-functions, like mine tailings. The aim of this study was to evaluate its ability to extract heavy metals from mine soils and accumulate them in plant tissues and its suitability for phytostabilization. Sundry samples of soil, roots and epigean organ were collected through field sampling and analysed in order to obtain metals concentration and mineralogical characteristics. Our results indicate that this species tolerates high concentration of zinc, lead and cadmium, behaving as a species suitable for phytostabilization.

Mobility of Ni, Co, and Mn in ultramafic mining soils of New Caledonia, assessed by kinetic EDTA extractions

The aim of this study was to determine the mobilization capability of Ni, Co, and Mn contained in New Caledonian ultramafic soils. Two series of soils were sampled: bare-surface mining soils in a Ni-mining context (n = 10), and forest soils, either in the vicinity of mine-working areas (n = 3) or far away from any known mining activity (n = 2). We focused on the < 100 μm soil fraction, because of its sensitivity to wind erosion, and its possible dissemination toward urbanized areas. In order to assess maximum potential metal mobility, EDTA kinetic extractions were performed over 24 h. Extraction curves were modeled as the sum of two first-order reactions. The first EDTA extracted pool corresponds to "quickly" released metals, while the second pool corresponds to "slowly" released metals. The remaining fraction is the EDTA non-extractable pool. Extractable Ni, Co, and Mn were always low in relation to total concentrations (< 5% for Ni, and 5-35% for Co and Mn). The extraction rate of the less labile pool was significantly higher for forest soils than for mining soils, whatever the metal. Despite the greater extractability potential in forest surface soils, mining soils represent a bigger environmental risk, because of their high metal content and, above all, because of their predisposition to surface runoff and eolian deflation.

Biodiversity variability and metal accumulation strategies in plants spontaneously inhibiting fly ash lagoon, India

Out of 29 plant species taken into consideration for biodiversity investigations, the present study screened out Cyperus rotundus L., Calotropis procera (Aiton) W.T. Aiton, Croton bonplandianus Baill., Eclipta prostrata (L.) L., and Vernonia cinerea (L.) Less. as the most suitable metal-tolerant plant species (high relative density and frequency) which can grow on metal-laden fly ash (FA) lagoon. Total (aqua-regia), residual (HNO₃) and plant available (CaCl₂) metal concentrations were assessed for the clean-up of metal-contaminated FA disposal site using naturally colonized plants. The total metal concentration (in mg kg^-1) in FA followed an order of Mn (229.8) > Ni (228.4) > Zn (89.4) > Cr (61.2) > Pb (56.6) > Cu (51.5) > Co (41.9) > Cd (9.7). The HNO₃- and CaCl₂-extracted metals were 0.57-15.68% and 0.03-7.82% of the total metal concentration, respectively. The concentration of Ni and Cr in FA in the present study was highest among the previously studied Indian and average world power plants and Cd, Ni, and Cr were above soil toxicity limit. The variation in total, residual, and plant-available metal (single extraction) concentration indicated the presence of different proportions of metals in FA lagoon which affects the metal uptake potential of the vegetation growing on it. It has been reported that plant-available metal extractant (CaCl₂) is the most suitable extractant for assessment of metal transfer from soil to plant. However in the present study, Spearman's correlation showed best significant correlation between total metal concentration in FA and shoot metal concentration (r = 0.840; p < 0.01) which suggest aqua-regia as the best extractant for understanding the bioavailability and transfer of metal, and in calculation of BCF for moderately contaminated site. It can be stated that plant-available extractant is not always suitable for understanding the availability of metal, but total metal concentration can provide a better insight especially for moderate or low metal-contaminated sites. Principle component analysis revealed that all the plants showed positive correlation with Co and Cd which suggest its subsequent uptake in root and shoot. The biological indices (BCF, BAF, and TF) revealed that E. prostrata (10 mg Cd kg^-1) and C. procera (3.5 mg Cd kg^-1) can be utilized efficiently for the phytoextraction of Cd and phytostabilization of other potentially toxic metals (Pb, Cr, and Co) from FA lagoon. All the plants were tolerant to Pb pollution (TF > 1, BAF > 1, and BCF > 1); hence, there was a negligible translocation of Pb to the aerial tissues of these plants which shows their suitability in phytostabilization. In addition, V. cinerea accumulated elevated concentration of potentially toxic Cr (50 mg Cr kg^-1) and Ni (67 mg Ni kg^-1) which could also help in the phytoremediation of FA lagoon.

Immobilization of Cu, Zn, Cd and Pb in mine drainage stream sediment using Chinese loess

The in situ immobilization of metal-contaminated sediment, using various amendments, has attracted great attention owing to their cost-effectiveness. The present study investigated the effectiveness of Chinese loess on Cu, Zn, Cd and Pb stabilization by decreasing their bioavailability in contaminated sediment. The loess was mixed with the sediment in doses of 0, 0.5, 1, 2, 5, 10 and 20 kg. Approximately 70 d after loess application, the effectiveness was evaluated using the Tessier sequential extraction procedure and single extractants, including ethylenediaminetetraacetic acid disodium salt (EDTA-2Na), diethylenetriaminepentaacetic acid (DTPA), calcium chloride (CaCl₂) and hydrochloric acid (HCl). The results indicated that the loess can effectively transform Cu from the carbonate fraction into the residual fraction when the loess dose was ≥5 kg. However, loess had little effect on Zn, Cd and Pb immobilization. Correlation analysis showed that these four extractants can provide a good indication of the toxicity of Cu, Zn, Cd and Pb in the amended sediment. Additionally, the organic matter content in the amended sediment decreased by 1.4% for CK, 1.6% for L0.5, 1.7% for L1, 1.5% for L2, 1.5% for L5, 1.9% for L10 and 1.9% for L20 (CK: untreated sediment; L0.5 to L20 represent loess doses of 0.5, 1, 2, 5, 10 and 20 kg, respectively) compared to the initial organic matter content in the unamended sediment, which may increase the atmospheric carbon dioxide owing to the degradation of organic matter.

Comparison of extractants used for the assessment of mercury availability in a soil from the Almadén mining district (Spain)

Single extraction methods have been extensively used to assess the availability of metals in polluted soils. This work focused on checking the feasibility of several chemicals, i.e. CaCl₂, EDTA, diethylenetriaminepentaacetic acid (DTPA) and a low-molecular-weight organic acid mixture (rhizosphere-based method), to be used as extractants for mercury (Hg) in a soil from the Almadén mining district (Spain). Moreover, the effect of several experimental parameters, i.e. extraction time (0.5, 1, 2, 5, 16 and 24 h), concentration of extractant (0.01, 0.05, 0.1 and 1 M) and soil/extractant ratio (1:2, 1:5 and 1:10), on the amount of Hg extracted was investigated. The Hg extraction ability followed the descending order EDTA > rhizosphere-based method > DTPA ≈ CaCl₂. This ranking was attributed to the higher complexation power of EDTA and organic acids. It was also found that extraction times between 2 and 5 h are required to avoid underestimation of mobile Hg and re-adsorption of the Hg previously extracted. Although some exceptions were found, Hg extraction efficiency was generally enhanced with higher extractant concentrations. Finally, the amount of Hg extracted by the four extractants increased with decreasing soil/extractant ratios.

Metal removal and associated binding fraction transformation in contaminated river sediment washed by different types of agents

In ex-situ washing, HCl, EDTA and H₂O₂ solutions can effectively extract heavy metals in river sediment. Nevertheless they often target different sediment components, possibly transforming metal species into more bioavailable and hence toxic ones. This study, in batch settings, investigated the influences of different types of washing agents (i.e. HCl, EDTA and H₂O₂) on metal (i.e. Cu and Zn) removal from contaminated river sediment, destroy or dissolution of sediment components, and transformation of metal fractions during chemical washing treatment. Additionally, bioavailability of these metals left in the washed sediment was assessed. Results showed that HCl obtained the highest Cu and Zn removal through destroying the reducible, oxidizable and residual sediment components. Meanwhile, it transformed metal fractions to acid extractable one, resulting in an increase in metal bioavailability. Thus, the feasibility of washing with HCl for sediment remediation shall be reconsidered due to the caused high metal bioavailability. EDTA was capable of removing metals via direct complexation of labile metal species and indirect dissolution of reducible and oxidizable sediment components, where the transformation of corresponding metal binding fraction may occur. H₂O₂ obtained the lowest total Cu and Zn removal, but it preferentially removed the oxidizable metal species by oxidizing sulfides in the sediment. The bioavailable levels of Cu and Zn in the sediment washed by EDTA or H₂O₂ seemed not increase. To maintain a good balance between labile metal species removal and avoiding increase of metal bioavailability, EDTA and H₂O₂ are promising additives for metal removal by sediment washing.

Bioavailability and Toxicity of Copper, Manganese, and Nickel in Paronychiurus kimi (Collembola), and Biomarker Discovery for Their Exposure

Bioavailability and toxicity of Cu, Mn, and Ni in Paronychiurus kimi were investigated after 28 days of exposure to OECD artificial soil spiked with these metals. Uptake and effect of Cu, Mn, and Ni on the reproduction of P. kimi were related to different metal fractions (water-soluble, 0.01 M CaCl₂-extractable or porewater metal concentrations). Cu and Mn concentrations in P. kimi increased with increasing Cu and Mn concentrations in the soil, while Ni contents in P. kimi reached a plateau at a concentration higher than 200 mg/kg in soil. Both uptake and juvenile production related well to different metal fractions, suggesting that these metal fractions are suitable for assessing bioavailability and toxicity of metals in P. kimi. When toxicity for reproduction was compared, as reflected by EC₅₀ values, the order of metal toxicity varied depending upon how exposure concentration was expressed. Moreover, the results of proteomic analysis showed that several proteins involved in the immune system, neuronal outgrowth, and metal ion binding were up-regulated in P. kimi following short-term (7 days) exposure to sublethal level (corresponding to 50% of the EC₅₀) of Cu, Mn, or Ni, respectively. This suggests that the ecotoxicoproteomic approach seems to be a promising tool for early exposure warnings below which significant adverse effects are unlikely to occur. This study demonstrated that a combination of chemical and biological measures can provide information about metal bioavailability and toxicity to which P. kimi has been exposed.

Palaeo-pollution from mining activities in the Vosges Mountains: 1000 years and still bioavailable

Mining and smelting activities have contaminated the environment with trace metals (TMs) at a worldwide scale for at least two millennia. A combination of chemical approaches and active biomonitoring was performed to analyse the environmental availability and bioavailability of TM palaeo-pollution in a former PbAg mining district in the Vosges Mountains, France. Along a soil TM contamination gradient that covered eight stations, including two archaeological mining sites, the toxicokinetics of six TMs (Pb, Cd, As, Ag, Co, Sb) in the snail Cantareus aspersus revealed that palaeo-pollution from the studied sites remains bioavailable. This study provides the first data on the accumulation kinetics of Ag and Co for C. aspersus. The environmental availability of the TMs was estimated with three chemical extraction methods (aqua regia, EDTA 50 mM, CaCl2 10 mM). Univariate regression analyses showed that EDTA extraction is the best method for estimating the bioavailability of Pb, As, Ag, Co and Sb to snails. None of the three extractants was efficient for Cd. A multivariate analysis of bioaccumulation data revealed that TM bioavailability and transfer were modulated by exposure sources (soil, humus and vegetation) rather than by soil physico-chemical characteristics. Hence, although the deposition of mining wastes dates back several centuries, these wastes still represent a source of contamination that must be considered to develop relevant site management and environmental risk assessment.

The distribution of macronutrients, anti-nutrients and essential elements in nettles, Laportea peduncularis susp. peduncularis (River nettle) and Urtica dioica (Stinging nettle)

Laportea peduncularis and Urtica dioica, which are popularly known as "Nettles" belong to the plant family Urticaceae and are consumed as green vegetables or used for their medicinal benefit in many countries in Africa, Asia, Europe and America. This study aimed at investigating the effect of cooking on the macronutrient, anti-nutrient and elemental composition of L. peduncularis and U. dioica leaves. The results showed a decrease in the crude fat, ash, carbohydrate and vitamin C content with cooking, but an increase in the vitamin E content. The anti-nutrient content (cyanides, phytates and saponins) increased slightly with cooking, while the oxalate content has decreased. The concentration of essential elements in cooked L. peduncularis leaves were found to be in decreasing order of Ca > Mg > Fe > Mn > Zn > Cu > Cr > Ni > Co. Both raw and cooked leaves of nettles were found to be rich sources of macronutrients and essential elements and may be used as alternatives to commercially available nutrient supplements. Statistical analyses (principal component analysis and correlations) indicated that certain elements taken up by these plants were from common sources. Both positive and negative relationships between nutrients, anti-nutrients and elements were observed in the plant leaves.

Palmarosa [Cymbopogon martinii (Roxb.) Wats.] as a putative crop for phytoremediation, in tannery sludge polluted soil

A field experiment using tannery sludge as a soil amendment material and palmarosa (Cymbopogon martinii) as a potential phytostabilizer was conducted to investigate their synergistic effect in relation to the improvement in soil quality/property. Three consecutive harvests of two cultivars of palmarosa-PRC-1 and Trishna, were examined to find out the influence of different tannery sludge doses on their herb, dry matter, essential oil yield and heavy metal accumulation. Soil fertility parameters (N, P, K, Organic carbon) were markedly affected by different doses of sludge. Enhanced soil nitrogen was positively correlated with herb yield (0.719*) and plant height (0.797*). The highest dose of tannery sludge (100 t ha(-1)) exhibited best performance than other treatments with respect to herb, dry matter and oil yield in all three harvests. Trishna was found to be superior to PRC-1 in relation to same studied traits. Quality of oil varied, but was insignificant statistically. Uptake of heavy metals followed same order (Cr>Ni>Pb>Cd) in roots and shoots. Translocation factor <1 for all trace elements and Bioconcentration factor >1 was observed in case of all heavy metals. Overall, tannery sludge enhanced the productivity of crop and metal accumulation occurred in roots with a meager translocation to shoots, hence it can be used as a phytostabiliser. The major advantage of taking palmarosa in metal polluted soil is that unlike food and agricultural crops, the product (essential oil) is extracted by hydro-distillation and there is no chance of oil contamination, thus is commercially acceptable.

Potential bioavailability of mercury in humus-coated clay minerals

It is well-known that both clay and organic matter in soils play a key role in mercury biogeochemistry, while their combined effect is less studied. In this study, kaolinite, vermiculite, and montmorillonite were coated or not with humus, and spiked with inorganic mercury (IHg) or methylmercury (MeHg). The potential bioavailability of mercury to plants or deposit-feeders was assessed by CaCl2 or bovine serum albumin (BSA) extraction. For uncoated clay, IHg or MeHg extraction was generally lower in montmorillonite, due to its greater number of functional groups. Humus coating increased partitioning of IHg (0.5%-13.7%) and MeHg (0.8%-52.9%) in clay, because clay-sorbed humus provided more strong binding sites for mercury. Furthermore, humus coating led to a decrease in IHg (3.0%-59.8% for CaCl2 and 2.1%-5.0% for BSA) and MeHg (8.9%-74.6% for CaCl2 and 0.5%-8.2% for BSA) extraction, due to strong binding between mercury and clay-sorbed humus. Among various humus-coated clay particles, mercury extraction by CaCl2 (mainly through cation exchange) was lowest in humus-coated vermiculite, explained by the strong binding between humus and vermiculite. The inhibitory effect of humus on mercury bioavailability was also evidenced by the negative relationship between mercury extraction by CaCl2 and mercury in the organo-complexed fraction. In contrast, extraction of mercury by BSA (principally through complexation) was lowest in humus-coated montmorillonite. This was because BSA itself could be extensively sorbed onto montmorillonite. Results suggested that humus-coated clay could substantially decrease the potential bioavailability of mercury in soils, which should be considered when assessing risk in mercury-contaminated soils.

Effects of rice residue incorporation on the speciation, potential bioavailability and risk of mercury in a contaminated paddy soil

To reduce air pollution, straw return instead of burning is being strongly encouraged in China, including some mercury polluted areas. Nevertheless, the possible influences of straw return on methylation, bioavailability and exposure risk of mercury were relatively unknown. In this study, different amounts of rice straw or root were added into a mercury contaminated soil. Potential bioavailability of soil-bound mercury to crops/deposit-feeders was assessed by quantifying extraction rates of mercury (%) by calcium chloride (CaCl2)/bovine serum albumin (BSA). Extraction rates of inorganic mercury (IHg) or methylmercury (MMHg) decreased significantly in rice residue amended soils, possibly due to the strong binding of mercury with organic matter in root/straw. Meanwhile, MMHg concentrations increased by 2-8 times in amended soils. Such increases were attributed to enhanced microbial activities and/or formation of Hg-S-DOM complexes after rice residue incorporation and decomposition. Consequently, potential exposure risk of IHg (quantified as concentration of potentially bioavailable mercury in soil) decreased significantly while that of MMHg increased up to 4 times. To our knowledge, this is the first study demonstrating that rice residue incorporation could significantly affect biogeochemistry of both IHg and MMHg in soils, which should be considered in straw incorporation activities in mercury polluted areas.

Incorporation of Decomposed Crop Straw Affects Potential Phytoavailability of Mercury in a Mining-Contaminated Farming Soil

Recently, incorporation of crop straw into soils is being largely encouraged worldwide. To explore the possible influence of incorporation of decomposed crop straw on the speciation (i.e., inorganic mercury/IHg, and methylmercury/MMHg) and phytoavailability of mercury, mercury-contaminated farming soil was amended with different amounts (i.e., low, medium or high) of straw organic fertilizer (SF, mainly consisting of decomposed rice straw) or humus (HU) and incubated for a month. Potential phytoavailability of IHg, assessed by CaCl2 extraction, was significantly lower in soils amended with low/medium SF, possibly due to the immobilization effect of SF-organic matter on IHg. In contrast, phytoavailability of IHg was significantly higher in soils incorporated with high HU, possibly explained by the leaching effect of dissolved HU on soil-bound IHg. For MMHg, incorporation of medium/high HU significantly increased MMHg phytoavailability, while SF addition had little effect. Interestingly, MMHg levels in SF/HU amended soils were generally lower than that in soil receiving no amendment, probably because complexation of IHg with SF/HU organics decreased IHg availability to methylation microorganisms. Overall, current results suggested that incorporation of decomposed crop straw may have multiple effects on mercury biogeochemistry in soils, which should be considered when applying SF into mercury-contaminated farming soils.

Leaching assessments of toxic metals in waste plasma display panel glass

The plasma display panel (PDP) is rapidly becoming obsolete, contributing in large amounts to the electronic waste stream. In order to assess the potential for environmental pollution due to hazardous metals leached from PDP glass, standardized leaching procedures, chemical speciation assessments, and bioavailability tests were conducted. According to the Toxicity Characteristic Leaching Procedure (TCLP), arsenic in back glass was present at 4.46 ± 0.22 mg/L, close to its regulation limit of 5 mg/L. Zn is not available in the TCLP, but its TCLP leaching concentration in back glass is 102.96 ± 5.34 mg/L. This is because more than 90% of Zn is in the soluble and exchangeable and carbonate fraction. We did not detect significant levels of Ag, Ba, or Cu in the TCLP leachate, and the main fraction of Ag and Ba is residual, more than 95%, while the fraction distribution of Cu changes SEP by SEP. Ethylenediamine tetraacetic acid (EDTA)- and diethylenetriamine pentaacetic acid (DTPA)-extractable Ag, As, Ba, Cu, Zn, and Ni indicate a lower biohazards potential. These results show that, according to the EPA regulations, PDP glass may not be classified as hazardous waste because none of the metals exceeded their thresholds in PDP leachate. However, the concentrations of As and Zn should be lowered in the manufacturing process and finished product to avoid potential pollution problems.

IMPLICATIONS

The plasma display panel is rapidly becoming obsolete because of the liquid crystal display. In this study, the leachability of heavy metals contained in the waste plasma display panel glass was first examined by standardized leaching tests, typical chemical speciation assessments, and bioavailability tests, providing fundamental data for waste PDP glass recovery, recycling, and reuse.

Potentially toxic element phytoavailability assessment in Technosols from former smelting and mining areas

This study reports the chemical bioavailability of several potentially toxic elements (Zn, Pb, Cd, As, and Sb) in contaminated Technosols from two former smelting and mining areas. Though these elements have long been recognized as potentially harmful elements, understanding of their toxicity and environmental behavior in Technosols developed on former mining and smelting sites are more limited, particularly for As and Sb. Surface soils were sampled from metallophyte grassland contaminated with Zn, Pb, and Cd located at Mortagne-du-Nord (North France) and from a former mining settling basin contaminated with As, Pb, and Sb located at la Petite Faye (Limoges, France). Various selective single extraction procedures (CaCl2, NaNO3, NH4NO3, DTPA, and EDTA) were used together with germination tests with dwarf beans whose shoots were analyzed for their potentially toxic element concentrations after 21 days of growth. The extraction capacity of the potentially toxic elements followed the order EDTA > DTPA > NH4NO3 > CaCl2 > NaNO3 for both studied areas. Pearson's correlation coefficient analysis between the concentrations of potentially toxic elements accumulated in bean primary leaves or their mineral mass with their extractable concentrations showed a positive significant correlation with dilute CaCl2 and nitrate solutions extraction procedures. In contrast, for all studied elements, except Pb, the complexing and chelating extractants (EDTA and DTPA) exhibited poor correlation with the dwarf bean leaves concentrations. Moreover, results showed that the 0.01 M CaCl2 extraction procedure was the most suitable and provided the most useful indications of metal phytoavailability for studied elements.

Prediction of methylmercury accumulation in rice grains by chemical extraction methods

To explore the possibility of using chemical extraction methods to predict phytoavailability/bioaccumulation of soil-bound MeHg, MeHg extractions by three widely-used extractants (CaCl2, DTPA, and (NH4)2S2O3) were compared with MeHg accumulation in rice grains. Despite of variations in characteristics of different soils, MeHg extracted by (NH4)2S2O3 (highly affinitive to MeHg) correlated well with grain MeHg levels. Thus (NH4)2S2O3 extraction, solubilizing not only weakly-bound and but also strongly-bound MeHg, may provide a measure of 'phytoavailable MeHg pool' for rice plants. Besides, a better prediction of grain MeHg levels was obtained when growing condition of rice plants was also considered. However, MeHg extracted by CaCl2 or DTPA, possibly quantifying 'exchangeable MeHg pool' or 'weakly-complexed MeHg pool' in soils, may not indicate phytoavailable MeHg or predict grain MeHg levels. Our results provided the possibility of predicting MeHg phytoavailability/bioaccumulation by (NH4)2S2O3 extraction, which could be useful in screening soils for rice cultivation in contaminated areas.

Assessment of metal(loid)s phytoavailability in intensive agricultural soils by the application of single extractions to rhizosphere soil

The influence of soil properties on the phytoavailability of metal(loid)s in a soil-plant system was evaluated. The content of extractable metal(loid)s obtained by using different extraction methods was also compared. To perform this study, a test plant (Lactuca sativa) and rhizosphere soil were sampled at 5 different time points (2, 4, 6, 8 and 10 weeks of plant growth). Four extraction methods (Mehlich 3, DTPA, NH4NO3 and CaCl2) were used. Significant positive correlations between the soil extractable content and lettuce shoot content were obtained for several metal(loid)s. The extraction with NH4NO3 showed the higher number of strong positive correlations indicating the suitability of this method to estimate metal(loid)s phytoavailability. The soil CEC, OM, pH, texture and oxides content significantly influenced the distribution of metal(loid)s between the phytoavailable and non-phytoavailable fractions. A reliable prediction model for Cr, V, Ni, As, Pb, Co, Cd, and Sb phytoavailability was obtained considering the amount of metal(loid) extracted by the NH4NO3 method and the main soil properties. This work shows that the analysis of rhizosphere soil by single extractions methods is a reliable approach to estimate metal(loid)s phytoavailability.

Potentially toxic elements (PTEs) in soils from the surroundings of the Trans-Amazonian Highway, Brazil

The Trans-Amazonian Highway (TAH) is located in the northern region of Brazil, comprising a border region where agricultural, mining, and logging activities are the main activities responsible for fostering economic development, in addition to large hydroelectric plants. Such activities lead to environmental contamination by potentially toxic elements (PTEs). Environmental monitoring is only possible through the determination of element contents under natural conditions. Many extraction methods have been proposed to determine PTEs' bioavailability in the soil; however, there is no consensus about which extractor is most suitable. In this study, we determined the contents of PTEs in soils in the surroundings of TAH after mineral extraction with diethylenetriaminepentaacetic acid-triethanolamine (DTPA-TEA), Mehlich I, and Mehlich III solutions. Soil samples were collected in areas of natural vegetation in the vicinity of TAH in the state of Pará, Brazil. Chemical attributes and particle size were determined, besides concentrations of Fe, Al, Mn, and Ti by sulfuric acid digestion, Si after alkaline solution attack, and poorly crystalline Fe, Al, and "free" Fe oxides. Mehlich III solution extracted greater contents from Fe, Al, and Pb as compared to Mehlich I and DTPA-TEA and similar contents from Cd, Mn, Zn, and Cu. Significant correlations were found between concentrations of PTEs and the contents of Fe and Mn oxides as well as organic carbon and soil cation exchange capacity. Contents of Cu, Mn, Fe, and Zn by the three methods were positively correlated.

Chemical extractability of As and Pb from soils across long-term abandoned metallic mine sites in Korea and their phytoavailability assessed by Brassica juncea

The chemical extractability of As and Pb (by 5 mM CaCl2, 0.1 M HCl, 0.05 M NH4 (H2PO4), and aqua regia) from soils and their phytoavailability (by Brassica juncea) were assessed using 16 soil samples collected as a function of distance from mine pits across three long-term abandoned metallic mine sites. The total concentrations of As and Pb (17-41,000 and 27-10,047 mg kg(-1), respectively) decreased with increasing separation distance from the mine pits along a declining slope. However, the percentage of chemically leachable As and Pb mass (e.g., by 5 mM CaCl2, 0.1 M HCl, or 0.05 M NH4(H2PO4)) relative to total mass (e.g., by aqua regia) tended to increase exponentially with distance, indicating more chemically labile fractions present in less contaminated downgradient soils. Among soil components, extractable As concentrations were best described by coupling DCB-Al with other Al and Fe oxides. For Pb concentration, pH coupled to DCB-Al or Ox-Al provided a good predictive relationship. The inhibitory growth and uptake by plants were best correlated with the extractable concentrations by 5 mM CaCl2 and 0.1 M HCl. In conclusion, the chemical extractability and phytoavailability of As and Pb are highly influenced by the relative labile fraction in abandoned mine soils, and its distribution in soils is essentially correlated with sampling distance from mine pits.

Enhancing soluble phosphorus removal within buffer strips using industrial by-products

Using industrial by-products (IBPs) in conjunction with buffer strips provides a potentially new strategy for enhancing soluble phosphorus (P) removal from agricultural runoff. Here, we investigate the feasibility of this approach by assessing the P sorption properties of IBPs at different solution-IBPs contact time (1-120 min) and solution pH (3, 5.5, 7.5), as well as possible adverse environmental effects including P desorption or heavy metal mobilisation from IBPs. Batch experiments were carried out on two widely available IBPs in the UK that demonstrated high P sorption capacity but different physicochemical characteristics, specifically ochre and Aluminium (Al) based water treatment residuals (Al-WTR). A series of kinetic sorption-desorption experiments alongside kinetic modelling were used to understand the rate and the mechanisms of P removal across a range of reaction times. The results of the kinetic experiments indicated that P was initially sorbed rapidly to both ochre and Al-WTR, followed by a second phase characterised by a slower sorption rate. The excellent fits of kinetic sorption data to a pseudo-second order model for both materials suggested surface chemisorption as the rate-controlling mechanism. Neither ochre nor Al-WTR released substantial quantities of either P or heavy metals into solution, suggesting that they could be applied to buffer strip soils at recommended rates (≤30 g kg(-1) soil) without adverse environmental impact. Although the rate of P sorption by freshly-generated Al-WTR applied to buffer strips reduced following air-drying, this would not limit its practical application to buffer strips in the field if adequate contact time with runoff was provided.

Food crop accumulation and bioavailability assessment for antimony (Sb) compared with arsenic (As) in contaminated soils

Field samples and a 9-week glasshouse growth trial were used to investigate the accumulation of mining derived arsenic (As) and antimony (Sb) in vegetable crops growing on the Macleay River Floodplain in Northern New South Wales, Australia. The soils were also extracted using EDTA to assess the potential for this extractant to be used as a predictor of As and Sb uptake in vegetables, and a simplified bioaccessibility extraction test (SBET) to understand potential for uptake in the human gut with soil ingestion. Metalloids were not detected in any field vegetables sampled. Antimony was not detected in the growth trial vegetable crops over the 9-week greenhouse trial. Arsenic accumulation in edible vegetable parts was <10 % total soil-borne As with concentrations less than the current Australian maximum residue concentration for cereals. The results indicate that risk of exposure through short-term vegetable crops is low. The data also demonstrate that uptake pathways for Sb and As in the vegetables were different with uptake strongly impacted by soil properties. A fraction of soil-borne metalloid was soluble in the different soils resulting in Sb soil solution concentration (10.75 ± 0.52 μg L(-1)) that could present concern for contamination of water resources. EDTA proved a poor predictor of As and Sb phytoavailability. Oral bioaccessibility, as measured by SBET, was <7 % for total As and <3 % total Sb which is important to consider when estimating the real risk from soil borne As and Sb in the floodplain environment.

Geochemical characterization and biomonitoring of reclaimed soils in the Po River Delta (Northern Italy): implications for the agricultural activities

This geochemical study is focused on the easternmost part of the Po River alluvial plain in Northern Italy, which is interested by widespread agricultural activities, investigating a reclaimed sector of the Province of Ferrara, known as "Valle del Mezzano" (Mezzano Low Land, hereafter reported as MLL) characterized by peat-rich soils. The chemical-mineralogical characterization of these reclaimed soils is important to compare the local geochemical backgrounds with those recorded in other sectors of the River Po plain and to monitor if the observed concentration exceeds critical thresholds. The reported analyses include (a) measurement of the soil salinity, (b) nutrient evaluation, (c) major and trace element concentrations carried out on bulk soils, (d) tests of metal extraction with both aqua regia and EDTA to highlight the distinct elemental mobility and (e) phyto-toxicological measurement of heavy metal concentrations in plants (Lactuca sativa acephala) grown on the studied soils. The results indicate (1) high soil salinity, often with drastic increase of sodium and chloride along the soil profiles, (2) high nitrogen content (in part related to anthropogenic activities) on superficial horizons and nitrate decrease along the soil profiles and (3) comparative enrichments in heavy metals with respect to other soils of the province, which indicate that peat deposits are effective in trapping metals from anthropogenic sources. This, in turn, implies potential geochemical risks for the agricultural activities. In this regard, specific concerns are related to the high nickel and arsenic content of MLL soils due to the mobility of these elements and their attitude to be taken up by plants.

A comparative study of heavy metal accumulation and antioxidant responses in Vaccinium myrtillus L. leaves in polluted and non-polluted areas

The purpose of this study was to explore a possible relationship between the availability of metals in soil (Cd, Fe, Mn, Pb and Zn) and their concentrations in leaves of Vaccinium myrtillus L. as a species which has been reported to be a successful colonist of acid-and-heavy metal-contaminated soil. Analysis also concerned the antioxidant response of plants from three heavily polluted (immediate vicinity of: zinc smelter, iron smelter and power plant) and three relatively clean sites (nature reserve, ecological site and unprotected natural forest community) in southern Poland. The contents of glutathione, non-protein thiols, protein, proline and activity of guaiacol peroxidase in leaves of bilberry were measured. Generally, the concentrations of metals in the HNO3 and CaCl2 extracants of the soil from the polluted sites were higher. Moreover, the antioxidant responses were also elevated in bilberries in the polluted sites. Significant positive relationships between Cd, Pb and Zn concentrations in soil and in the plants were found. In the leaves of V. myrtillus from the polluted sites, higher concentrations of Cd, Pb and Zn were noted (In Miasteczko Śląskie respectively 6.26, 157.09 and 207.17 mg kg(-1) d.w.). We found a positive correlation between the increase in the NPTs and protein contents as well as the Cd, Pb and Zn concentrations in V. myrtillus. Cd, Pb and Zn also decreased guaiacol peroxidase activity. However, the activity of this enzyme increased under Fe. A decreasing trend in glutathione contents was observed with increasing iron and manganese concentrations in bilberry leaves. Parameters such as protein, non-protein -SH groups and changes in GPX activity seem to be universal, sensitive and correlated well with heavy metal stress.

Assessment of trace metal bioavailability in garden soils and health risks via consumption of vegetables in the vicinity of Tongling mining area, China

Environmental pollution due to mining activities has been reported in many countries. In this study, 283 vegetable and 44 corresponding garden soil samples were collected in the vicinity of the Tongling mining area, China. The aim was to evaluate the bioavailability of trace metals (Cu, Zn, Pb and Cd) to vegetables by comparing different methods (trace metals in DTPA, EDTA, HCl, NH(4)NO(3), NH(4)OAC aqueous solutions and total metals in garden soils), and assess the potential health risks of trace metals to the local population via vegetable consumption. The results showed that the mean values of total Cu and Cd in the soil samples exceeded the Grade II national standard in China. Average concentrations of Cd and Pb in some vegetable samples were higher than the maximum permissible concentration in China. The transfer factors for trace metals in different vegetables showed a trend of Cd>Zn>Cu> Pb. Asteraceae vegetables had stronger metal uptake than Liliaceae. The total target hazard quotient (THQ) value was greater than 1, suggesting that trace metals in vegetables could present some potential health risks. The effectiveness of the studied methods for estimating soil metal bioavailability was generally dependent on the particular metal and vegetable species. Overall, 1.0M NH(4)OAC provided the best estimate of Cd and Zn bioavailability in multi-elemental contaminated soils. None of the studied soil metal extraction methods appeared suitable for measuring Cu or Pb bioavailability, especially for Pb, which showed almost no correlation between metal concentration in soil and vegetables.

Distribution and bioavailability of cadmium in ornithogenic coral-sand sediments of the Xisha archipelago, South China Sea

Total cadmium (Cd) concentrations in four ornithogenic coral-sand sedimentary profiles displayed a strong positive correlation with guano-derived phosphorus, but had no correlation with plant-originated organic matter in the top sediments. These results indicate that the total Cd distributions were predominantly controlled by guano input. Bioavailable Cd and zinc (Zn) had a greater input rate in the top sediments with respect to total Cd and total Zn, and a positive correlation with total organic carbon (TOC) derived from plant humus. Multi-regression analysis showed that the total Cd and TOC explained over 80% of the variation of bioavailable Cd, suggesting that both guano and plant inputs could significantly influence the distribution of bioavailable Cd, and that plant biocycling processes contribute more to the recent increase of bioavailable Cd. A pollution assessment indicates that the Yongle archipelago is moderately to strongly polluted with guano-derived Cd.

Fractionation and availability of heavy metals in tannery sludge-amended soil and toxicity assessment on the fully-grown Phaseolus vulgaris cultivars

This study was conducted to assess the effect of tannery sludge on the bush bean (Phaseolus vulgaris) cultivars fully-grown on a culture sandy soil, as tannery sludge is valuable to improve soil fertility but long term studies evaluating the effect on fully grown plants are scarce. Tannery sludge amendments (0, 0.77, 1.54, 3.08 and 6.16 g tannery sludge kg(-1) soil) were characterized and the main heavy metals identified (Cr, Mn, Fe, K, and Zn) later on sequentially and singly extracted, for soil fractionation and availability determination, respectively. Metals showed different fractionation and availability patterns, being the most toxic metal (Cr) found to primarily bind to the carbonate fraction in soil, while almost 10% of the total Cr was available for plant uptake. In the green house experiments, bush bean cultivars exposed to increasing tannery sludge amendments were evaluated at different plant stages. Metal accumulation and physiological parameters (chlorophyll, carotenoids, nitrate reductase activity and dry weight) were determined. Toxicity was primarily due to Cr, stimulating or affecting the response of physiological parameters and suppressing seed formation at the highest tannery sludge ratio. Metals were mainly accumulated in the roots of bush beans, diminishing in the upper part of the plants with minimal translocation to seeds, supposing little risk for human consumption. Additionally, important correlations, antagonistic and synergistic relationships were observed between the extracted metals and metal accumulation in plant tissues.