Bisphenol A removal by the Dracaena plant and the role of plant-associating bacteria

Enhanced biodegradation of endocrine disruptor bisphenol A by food waste composting without bioaugmentation: Analysis of bacterial communities and their relative abundances

Composting with food waste was assessed for its efficacy in decontaminating Bisphenol A (BPA). In a BPA-treated compost pile, the initial concentration of BPA 847 mg kg-1 fell to 6.3 mg kg-1 (99% reduction) over a 45-day composting period. The biodegradation rate was at its highest when bacterial activity peaked in the mesophilic and thermophilic phases. The average rate of total biodegradation was 18.68 mg kg-1 day-1. Standard methods were used to assess physicochemical parameters of the compost matrix and gas chromatography combined with mass spectrometry (GC/MS) was used to identify BPA intermediates. Next-generation sequencing (NGS) was used to detect BPA degraders and the diverse bacterial communities involved in BPA decomposition. These communities were found consist of 12 phyla and 21 genera during the composting process and were most diversified during the maturation phase. Three dominant phyla, Firmicutes, Pseudomonadota, and Bacteroidetes, along with Lactobacillus, Proteus, Bacillus, and Pseudomonas were found to be the most responsible for BPA degradation. Different bacterial communities were found to be involved in the food waste compost biodegradation of BPA at different stages of the composting process. In conclusion, food waste composting can effectively remove BPA, resulting in a safe product. These findings might be used to expand bioremediation technologies to apply to a wide range of pollutants.

Spinel cobalt ferrite-based porous activated carbon in conjunction with UV light irradiation for boosting peroxymonosulfate oxidation of bisphenol A

Developing heterogeneous catalysts with high performance for peroxymonosulfate (PMS) activation to decontaminate organic pollutants from wastewater is of prominent importance. In this study, spinel cobalt ferrite (CoFe₂O₄) materials were coated on the surface of powdered activated carbon (CoFe₂O₄@PAC) via the facile co-precipitation method. The high specific surface area of PAC was beneficial for the adsorption of both bisphenol A (BP-A) and PMS molecules. The CoFe₂O₄@PAC-mediated PMS activation process under UV light could effectively eliminate 99.4% of the BP-A within 60 min of reaction. A significant synergy effect was attained between CoFe₂O₄ and PAC towards PMS activation and subsequent elimination of BP-A. Comparative tests demonstrated that the heterogeneous CoFe₂O₄@PAC catalyst had a better degradation performance in comparison with its components and homogeneous catalysts (Fe, Co, and, Fe + Co ions). The formed by-products and intermediates during BP-A decontamination were evaluated using LC/MS analysis, and then a possible degradation pathway was proposed. Moreover, the prepared catalyst exhibited excellent performance in recyclability with slight leaching amounts of Co and Fe ions. A TOC conversion of 38% was obtained after five consecutive reaction cycles. It can be concluded that the PMS photo-activation process via the CoFe₂O₄@PAC catalyst can be utilized as an effective and promising method for the degradation of organic contaminants from polluted-water resources.

The potential roles of carotenoids in enhancing phytoremediation of bisphenol A contaminated soil by promoting plant physiology and modulating rhizobacterial community of tobacco

The widespread occurrence of bisphenol A (BPA), a typical endocrine-disrupting compound, poses potential threat to ecosystem and public health. Carotenoids are essential natural pigments, playing important roles in photosynthesis and antioxidant defense of plants. This study aimed to verify the value of carotenoids in enhancing plant tolerance to BPA stress and improving phytoremediation efficiency of tobacco (Nicotiana tabacum L.), through exogenous application of β-carotene (a typical carotenoid) and endogenous upregulation of carotenoids by overexpression of β-carotene hydroxylase (chyb) gene in tobacco. The results demonstrated that exogenous applied β-carotene alleviated the toxic effects of BPA exposure (100 mg kg^-1) on wild-type (WT) tobacco plants after being cultivated for 40 d, reflecting by the increase of biomass (201.2%), chlorophyll content (27.5%) and the decrease of malondialdehyde (MDA) content (70.7%). Similar with the results of exogenous application of β-carotene, chyb gene overexpressing tobacco showed less phytotoxicity exposed to BPA, through enhancing photosynthetic efficiency (42.1%) and reducing reactive oxygen species (ROS) production (18%). Notably, about 94.8% BPA in contaminated soil was removed under the cultivation of transgenic tobacco for 40 d, however, only 82.7% was removed in that of WT tobacco. Moreover, transgenic tobacco is beneficial for the growth of plant roots, thus upregulating the abundance of bacteria contributing to BPA degradation or soil nutrient cycling (e.g., Proteobacteria, Acidobacteria, Actinobacteria, Sphingomonas and MND1), which might further help to enhance plant growth and improve BPA removal efficiency in soil. This study extended our understanding of the possible mechanisms of carotenoids-involved alleviation of BPA stress in tobacco, providing a novel strategy to improve phytoremediation efficiency of plants in BPA contaminated soil.

Bioremediation of a salty petrochemical wastewater containing bisphenol A by a novel indigenous Pseudomonas pseudoalcaligenes

One novel indigenous halotolerant, Pseudomonas sp, with high potential for bisphenol A (BPA) biodegradation was isolated from an outlet of petrochemical wastewater in Iran. The optimal temperature and pH for degradation of BPA by this strain were 30 °C and 7, respectively. This strain was able to decrease COD (chemical oxygen demand) of basal salt medium containing 300 mg L^-1 BPA as sole carbon source and 40 g L^-1 NaCl from 655.2 to 109.2 mg L^-1 (about 83% decrease) after 36 h. The bacterium degraded 56.3 (19%), 202.43 (67%), 288.86 (96%) and 300 mg L^-1 (100%) BPA in basal salt medium containing 300 mg L^-1 BPA and 40 g L^-1 NaCl within 12, 18, 24 and 36 h, respectively. In addition, this strain could degrade phenol (100 mg L^-1) and BPA (300 mg L^-1) in salty petrochemical wastewater within 24 h, completely. In batch fermentation of petrochemical wastewater using this strain higher growth and phenol (100 mg L^-1), BPA (372 mg L^-1) removal within 6 h were achieved. High performance liquid chromatography (HPLC) and gas chromatography mass spectrometry (GC/MS) analysis revealed several intermediates during the BPA degradation process. These intermediates were identified as 4-hydroxybenzaldehyde, 4-hydroxyacetophenone, 4-hydroxyphenylacetate, M-hydroxymandelic acid, 2-phenylpropane-1,2-diol, 2-phenyl-2-propanol and lactic acid. The possible BPA-biodegradation pathway based on the identified metabolites and in agreement with recorded pathway in KEGG database was proposed. Preliminary 16S rDNA sequence analysis and subsequent genetically characterization through comprehensive genomic analysis identified the strain as Pseudomonas pseudoalcaligenes strain YKJ.

Phytoremediation potential, antioxidant response, photosynthetic behavior and rhizosphere bacterial community adaptation of tobacco (Nicotiana tabacum L.) in a bisphenol A-contaminated soil

Bisphenol A (BPA) is an emerging organic pollutant, widely distributed and frequently detected in soil in recent years. BPA toxicity is a problem that needs to be solved in terms of both human health and agricultural production. Up to now, the toxic effect of BPA and its mechanism of action on plants, as well as the possibility of using plants to remediate BPA-contaminated soil, remain to be explored. In this study, six treatment groups were set up to evaluate the effects of different concentrations of BPA on the germination and growth of tobacco (Nicotiana tabacum L.) by medium experiments. Furthermore, the representative indexes of photosynthetic and antioxidant system were determined. Meanwhile, tobacco seedlings were cultivated in soil to further explore the effects of BPA on rhizosphere soil enzyme activity and bacterial community structure with or without 100 mg/kg BPA exposure. The enhancement of BPA removal efficiency from soil by phytoremediation using tobacco plants would also be estimated. Our results showed that high doses of BPA in solid medium remarkably inhibited tobacco seedling growth, and its toxicology effect was positively correlated with BPA concentration, while lower BPA exposure (< 20 mg/L) had little limitation on tobacco growth and induced hormesis effect, which was reflected mainly in the increase of root length. In pot experiments, the reducing of chlorophyll content (36.4%) and net photosynthetic rate (41.2%) meant the inhibition of tobacco photosynthetic process due to high concentration of BPA exposure (100 mg/kg) in soil. The increase of H2O2 and O2- content suggested that BPA could destroy the balance of reactive oxygen species (ROS) in plants. However, tobacco plants still presented a high removal efficiency of BPA at the concentration of 100 mg/kg in soil, which could reach to 80% within 30 days. Furthermore, it was indicated that tobacco cultivation changed the structure of rhizosphere soil bacterial communities and the relative abundance of some valuable strains, including Proteobacteria, Acidobacteria and other strains, which might be participated in the BPA removal process. In addition, the tobacco-soil microbial system had the potential to reverse the negative effects caused by BPA through stimulating microorganism associated with soil nutrient cycling. In summary, tobacco is a competitive plant in phytoremediation of BPA-contaminated soil, though the growth of tobacco could be inhibited at high concentration of BPA. Moreover, tobacco might promote the removal efficiency of BPA by regulating the rhizosphere bacteria communities.

Bio-removal of emerging pollutants by advanced bioremediation techniques

This review highlights the relevance of bioremediation techniques for the removal of emerging pollutants (EPs). The EPs are chemical or biological pollutants that are not currently monitored or regulated by environmental authorities, but which can enter the environment and cause harmful effects to the environment and human health. In recent times, an ample range of EPs have been found in water bodies, where they can unbalance ecosystems and cause negative effects on non-target species. In addition, some EPs have shown high rates of bioaccumulation in aquatic species, thus affecting the safety and quality of seafood. The negative impacts of emerging pollutants, their wide distribution in the environment, their bioaccumulation rates, and their resistance to wastewater treatment plants processes have led to research on sustainable remediation. Remediation techniques have been recently directed to advanced biological remediation technologies. Such technologies have exhibited numerous advantages like in-situ remediation, low costs, eco-friendliness, high public acceptance, and so on. Thus, the present review has compiled the most recent studies on bioremediation techniques for water decontamination from emerging pollutants to extend the current knowledge on sustainable remediation technologies. Biological emerging contaminants, agrochemicals, endocrine-disrupting chemicals, and pharmaceutical and personal care products were considered for this review study, and their removal by bioremediation techniques involving plants, bacteria, microalgae, and fungi. Finally, further research opportunities are presented based on current challenges from an economic, biological, and operation perspective.

Phytoremediation as an effective tool to handle emerging contaminants

Phytoremediation is a process which effectively uses plants as a tool to remove, detoxify or immobilize contaminants. It has been an eco-friendly and cost-effective technique to clean contaminated environments. The contaminants from various sources have caused an irreversible damage to all the biotic factors in the biosphere. Bioremediation has become an indispensable strategy in reclaiming or rehabilitating the environment that was damaged by the contaminants. The process of bioremediation has been extensively used for the past few decades to neutralize toxic contaminants, but the results have not been satisfactory due to the lack of cost-effectiveness, production of byproducts that are toxic and requirement of large landscape. Phytoremediation helps in treating chemical pollutants on two broad categories namely, emerging organic pollutants (EOPs) and emerging inorganic pollutants (EIOPs) under in situ conditions. The EOPs are produced from pharmaceutical, chemical and synthetic polymer industries, which have potential to pollute water and soil environments. Similarly, EIOPs are generated during mining operations, transportations and industries involved in urban development. Among the EIOPs, it has been noticed that there is pollution due to heavy metals, radioactive waste production and electronic waste in urban centers. Moreover, in recent times phytoremediation has been recognized as a feasible method to treat biological contaminants. Since remediation of soil and water is very important to preserve natural habitats and ecosystems, it is necessary to devise new strategies in using plants as a tool for remediation. In this review, we focus on recent advancements in phytoremediation strategies that could be utilized to mitigate the adverse effects of emerging contaminants without affecting the environment.

The complete plastid genome sequence of Dracaena fragrans (L.) Ker Gawl. (Asparagaceae)

Dracaena fragrans is a shrub native to tropical Africa classified in the family Asparagaceae. It is a common horticultural plant grown as a hedge as well as an ornamental house plant for its green leaves, attractive shape and fragrant flowers. The species has been used for many medicinal purposes including inducing labor, treating malnutrition and fighting illness. Here, we investigated the complete plastid genome of D. fragrans using Illumina 150 bp next-generation sequencing technologies. De novo assembly and annotation showed that the chloroplast genome is a typical quadripartite structure with 37.5% GC content. A pair of inverted repeats (IRs, 26,507 bp each) were separated by one large single-copy region (LSC, 83,703 bp) and one small single-copy region (SSC, 18,466 bp). The chloroplast genome is 155,183 bp in length and contained 131 genes of which 12 are intron-containing genes, comprising 85 protein-coding, 38 tRNA, and 8 rRNA genes. Phylogenetic analysis of D. fragrans and 11 plastomes obtained from GenBank shows that it is closely related to D. elliptica.

Enhanced Phytoremediation of Bisphenol A in Polluted Lake Water by Seedlings of Ceratophyllum demersum and Myriophyllum spicatum from In Vitro Culture

Bisphenol A (BPA) is a typical endocrine disruptor that causes problems in waters all around the world. In this study, the effects of submerged macrophytes (Ceratophyllum demersum and Myriophyllum spicatum) cultured in vitro on the removal of BPA at two initial concentrations (0.5 mg L⁻¹ vs. 5.0 mg L⁻¹) from Donghu lake water were investigated, using different biomass densities (2 g L⁻¹ vs. 10 g L⁻¹) under different nutrient conditions (1.85 mg L⁻¹ and 0.039 mg L⁻¹ vs. 8.04 mg L⁻¹ and 0.175 mg L⁻¹ of the total nitrogen and phosphorus concentration, respectively), together with the effect of indigenous microorganisms in the water. The results showed that indigenous microorganisms had limited capacity for BPA removal, especially at higher BPA initial concentration when its removal rate amounted to about 12% in 12 days. Addition with plant seedlings (5 cm in length) greatly enhanced the BPA removal, which reached 100% and over 50% at low and high BPA initial concentration in 3 days, respectively. Higher biomass density greatly favored the process, resulting in 100% of BPA removal at high BPA initial concentration in 3 days. However, increases in nutrient availability had little effect on the BPA removal by plants. BPA at 10.0 mg L⁻¹ significantly inhibited the growth of M. spicatum. Therefore, C. demersum may be a candidate for phytoremediation due to greater efficiency for BPA removal and tolerance to BPA pollution. Overall, seedlings of submerged macrophytes from in vitro culture showed great potential for use in phytoremediation of BPA in natural waters, especially C. demersum.

Investigating plant uptake of organic contaminants through transpiration stream concentration factor and neural network models

Uptake of seven organic contaminants including bisphenol A, estriol, 2,4-dinitrotoluene, N,N-diethyl-meta-toluamide (DEET), carbamazepine, acetaminophen, and lincomycin by tomato (Solanum lycopersicum L.), corn (Zea mays L.), and wheat (Triticum aestivum L.) was measured. The plants were grown in a growth chamber under recommended conditions and dosed by these chemicals for 19 days. The plant samples (stem transpiration stream) and solution in the exposure media were taken to measure transpiration stream concentration factor (TSCF). The plant samples were analyzed by a freeze-thaw centrifugation technique followed by high performance liquid chromatography-tandem mass spectrometry detection. Measured average TSCF values were used to test a neural network (NN) model previously developed for predicting plant uptake based on physicochemical properties. The results indicated that moderately hydrophobic compounds including carbamazepine and lincomycin have average TSCF values of 0.43 and 0.79, respectively. The average uptake of DEET, estriol, acetaminophen, and bisphenol A was also measured as 0.34, 0.29, 0.22, and 0.1, respectively. The 2,4-dinitrotoluene was not detected in the stem transpiration stream and it was shown to degrade in the root zone. Based on these results together with plant physiology measurements, we concluded that physicochemical properties of the chemicals did predict uptake, however, the role of other factors should be considered in the prediction of TSCF. While NN model could predict TSCF based on physicochemical properties with acceptable accuracies (mean squared error less than 0.25), the results for 2,4-dinitrotoluene and other compounds confirm the needs for considering other parameters related to both chemicals (stability) and plant species (role of lipids, lignin, and cellulose).

Colorimetric detection and bio-magnification of bisphenol A in fish organs and water sources using 3',6'-bis(diethylamino)-2- ((3,4,5trimethyl benzylidene) amino) spiro [isoindoline -1,9'-xanthen ]-3-one (BTSIXO)-Fe3+ ion conjugate

Current study is focusing mainly on the development of simple, novel, and cost-effective optical sensor to detect and quantify Bisphenol A (BPA) contamination. We designed a very selective and sensitive colorimetric sensor using synthesized 3', 6'- bis(diethylamino) -2- ((3,4,5 trimethyl benzylidene) amino)spiro [isoindoline-1,9'-xanthen] -3-one (BTSIXO) conjugated with Fe³⁺-ions via very simple eco- friendly synthetic protocol. The sensor has an excellent wide detection range for BPA from 0.1 to 150 ppm with LODs of 0.02 ppm. Finally, the applicability of the sensor was demonstrated in fish samples especially in the organs of Oreochromis mossambicus fingerlings and contaminated industrial water samples. The sensor was also applied for the quantification of BPA present drinking water stored in the plastic bottles. The developed sensor has shown a good agreement and accuracy when compared with ESI-Mass techniques.

Hazards of bisphenol A (BPA) exposure: A systematic review of plant toxicology studies

The widespread use of bisphenol A (BPA) has led to its ubiquity in the natural environment. Thus, BPA is considered as a contaminant of emerging concern. Due to its widespread use, BPA has been detected in a range of soils and surface waters. This is of concern because BPA has been shown to elicit slight to moderate toxicity to plants. Based on current research and our own work, this paper reviews the toxic effects of BPA on plant growth and development, including effects at the macroscopic (e.g. seed germination, root, stem, and leaf growth) and microscopic (photosynthesis, uptake of mineral nutrient, hormone secretion, antioxidant systems, and reproductive genetic behavior) levels. Furthermore, this paper will discuss effects of BPA exposure on metabolic reactions in exposed plant species, and explore the use of high-efficiency plants in BPA pollution control (e.g. phytoremediation). Finally, this paper proposes some ideas for the future of BPA phytotoxicity research.

Phytoremediation potential of switchgrass (Panicum virgatum), two United States native varieties, to remove bisphenol-A (BPA) from aqueous media

Plastic wastes burdening Earth’s water and accumulating on land, releasing toxic leachates, are one of the greatest global threats of our time. Bisphenol-A (BPA), a potent endocrine disrupting compound, is a synthetic ingredient of the polycarbonate plastics and epoxy resins used in food containers, cans, and water bottles. Bisphenol-A’s rising concentrations in the environment require a sustainable alternative to current removal practices, which are expensive and/or ecologically unsafe. Switchgrass offers a safe alternative. To investigate its potential for BPA removal, two United States native switchgrass varieties where tested in hydroponic media. Results show minimal hydrolysis and photolysis of BPA over 55 days, confirming its persistence. Both generic and heavy metal switchgrass exhibited statistically significant (p < 0.0001) BPA removal (40% and 46%, respectively) over approximately 3 months, underscoring switchgrass’s effectiveness for BPA removal. Significantly higher (p < 0.005) BPA accumulation in roots than shoots and nonsignificant variances in biomass, chlorophyll (p > 0.19), and peroxidase between BPA-treated and untreated plants indicates substantial BPA tolerance in both varieties. Kinetic parameters of BPA removal and translocation factors were also determined, which will inform the design of BPA removal phytotechnologies for a variety of soil conditions, including landfills where BPA accumulation is greatest.

Bisphenol A removal from a plastic industry wastewater by Dracaena sanderiana endophytic bacteria and Bacillus cereus NI

Understanding the significance of plant-endophytic bacteria for bisphenol A (BPA) removal is of importance for any application of organic pollutant phytoremediation. In this research, Dracaena sanderiana with endophytic Pantoea dispersa showed higher BPA removal than uninoculated plants at 89.54 ± 0.88% and 79.08 ± 1.20%, respectively. Quantitative Real-Time PCR (qPCR) showed that P. dispersa increased from 3.93 × 10⁷ to 8.80 × 10⁷ 16S rRNA gene copy number in root tissues from day 0 to day 5 which indicated that it could assist the plant in removing BPA during the treatment period. pH, chemical oxygen demand (COD), biochemical oxygen demand (BOD), total dissolved solids (TDS), conductivity, and salinity were reduced after 5 days of the experimental period. Particularly, BOD significantly decreased due to activities of the plants and microorganisms. Furthermore, an indigenous bacterial strain, Bacillus cereus NI, from the wastewater could remove BPA in high TDS and alkalinity condition of the wastewater. This work suggests that D. sanderiana plants could be used as a tertiary process in a wastewater treatment system and should be combined with its endophytic bacteria. In addition, B. cereus NI could also be applied for BPA removal from wastewaters with high TDS and salinity.

Dracaena sanderiana endophytic bacteria interactions: Effect of endophyte inoculation on bisphenol A removal

Bisphenol A (BPA) is one of the most abundant endocrine-disrupting compounds which is found in the aquatic environment. However, actual knowledge regarding the effect of plant-bacteria interactions on enhancing BPA removal is still lacking. In the present study, Dracaena sanderiana endophytic bacteria interactions were investigated to evaluate the effect of bacterial inoculation on BPA removal under hydroponic conditions. Two plant growth-promoting (PGP) bacterial strains, Bacillus thuringiensis and Pantoea dispersa, which have high BPA tolerance and can utilize BPA for growth, were used as plant inocula. P. dispersa-inoculated plants showed the highest BPA removal efficiency at 92.32 ± 1.23% compared to other inoculated and non-inoculated plants. This was due to a higher population of the endophytic inoculum within the plant tissues which resulted in maintained levels of indole-3-acetic acid (IAA) for the plant's physiological needs and lower levels of reactive oxygen species (ROS). In contrast, B. thuringiensis-inoculated plants had a lower BPA removal efficiency. However, individual B. thuringiensis possessed a significantly higher BPA removal efficiency compared to P. dispersa. This study provides convincing evidence that not all PGP endophytic bacteria-plant interactions could improve the BPA removal efficiency. Different inocula and inoculation times should be investigated before using plant inoculation to enhance phytoremediation.

Phytoremediation of Formaldehyde from Indoor Environment by Ornamental Plants: An Approach to Promote Occupants Health

Background

Formaldehyde is a common hazardous indoor air pollutant which recently raised public concerns due to its well-known carcinogenic effects on human. The aim of this study was to investigate a potted plant-soil system ability in formaldehyde removal from a poor ventilated indoor air to promote dwellers health.

Methods

For this purpose, we used one of the common interior plants from the fern species (Nephrolepis obliterata), inside a Plexiglas chamber under controlled environment. Entire plant removal efficiency and potted soil/roots contribution were determined by continuously introducing different formaldehyde vapor concentrations to the chamber (0.6-11 mg/m³) each over a 48-h period. Sampling was conducted from inlet and outlet of the chamber every morning and evening over the study period, and the average of each stage was reported.

Results

The results showed that the N. obliterata plant efficiently removed formaldehyde from the polluted air by 90%-100%, depending on the inlet concentrations, in a long time exposure. The contribution of the soil and roots for formaldehyde elimination was 26%. Evaluation of the plant growing characteristics showed that the fumigation did not affect the chlorophyll content, carotenoid, and average height of the plant; however, a decrease in the plant water content was observed.

Conclusions

According to the results of this study, phytoremediation of volatile organic compound-contaminated indoor air by the ornamental potted plants is an effective method which can be economically applicable in buildings. The fern species tested here had high potential to improve interior environments where formaldehyde emission is a health concern.

Bisphenols: Application, occurrence, safety, and biodegradation mediated by bacterial communities in wastewater treatment plants and rivers

Numerous data indicate that most of bisphenols (BPs) are endocrine disrupters and exhibit cytotoxicity, neurotoxicity, genotoxicity and reproductive toxicity against vertebrates. Nevertheless, they are widely applied in material production what result in their ubiquitous occurrence in ecosystems. While BPA is the most frequently detected in environment, BPAF, BPF and BPS are also often found. Ecosystem particularly exposed to BPs pollution is industrial and municipal wastewater being a common source of BPA in river waters. Different techniques to remove BPs from these ecosystems have been applied, among which biodegradation seems to be the most effective. In this review the current state of knowledge in the field of BPs application, distribution in the environment, effects on animal and human health, and biodegradation mediated by bacterial populations in wastewater treatment plants and rivers is presented.

Bacteria enhanced lignocellulosic activated carbon for biofiltration of bisphenols in water

There are eight bisphenol analogues being identified and characterized; among them, bisphenol A (BPA) is on the priority list on the basis of its higher level of uses, occurrence, and toxicity. The endocrine system interfered by BPA has been inventoried as it has the same function as the natural hormone 17β-estradiol and binds mainly to the estrogen receptor (ER) to exhibit estrogenic activities. The BPA concentration in surface waters (14-1390 ng/L) in many parts of the world, such as Japan, Korea, China, and India, was also a significant concern. Research efforts are focusing on restricting BPA consumption as well as removing BPA in our environment especially in drinking water. Current opinion is that lignocellulosic activated carbon stimulated with BPA-degrading bacteria could have the potential to provide solution for recent challenges faced by water utilities arising from BPA contamination in water. This technology has some new trends in the low-cost biofiltration process for removing BPA. This review is to provide in-depth discussion on the fate of BPA in our ecosystem and underlines methods to enhance the efficacy of activated carbon in the presence of BPA-degrading bacteria in the biofiltration process.

A preliminary analysis of the effects of bisphenol A on the plant root growth via changes in endogenous plant hormones

Bisphenol A (BPA) is ubiquitous in the environment worldwide, affecting plant growth and development. Endogenous plant hormones serve as switches that regulate plant growth and development. However, plants have different physiological requirements and environmental adaptive capacities during the different growth stages. Here, we investigated the effects of BPA on soybean (Glycine max L.) root growth at the three growth stages and analyzed the mechanisms underlying the effects of BPA on the root growth by assessing changes in endogenous hormone. The results showed that low concentration of BPA (1.5mgL-1) improved root growth (except at the seed-filling stage), increased indole-3-acetic acid (IAA) content at the first two growth stages, and increased zeatin (ZT) content and decreased gibberellic acid (GA3) content at the seedling stage. But low concentration of BPA caused decreased ethylene (ETH) contents and constant abscisic acid (ABA) content at all three stages. However, BPA at moderate and high concentrations (6.0 and 12.0mgL-1) inhibited root growth, causing the decreased IAA, GA3 and ETH contents and increased ABA content at all three growth stages. The change degrees of above indices were weakened with prolonging the growth stages. After BPA withdrawal, both the root growth and the hormone contents recovered (with the exception of ZT and ETH), and the recovery degrees had negative correlation with the BPA exposure concentration and had positive correlation with the growth stage. Changes in residual BPA content in the roots were also observed at different BPA concentrations and different growth stages. Our results demonstrated the effects of BPA on root growth were related to BPA-induced changes in hormone, which performed differently at various growth stages.

Early maturation and liver necrosis in the fingerling stage of Oreochromis mossambicus due to BPA can cause an ecological imbalance

We investigated the effect of Bisphenol-A (BPA) on the fingerlings of Oreochromis mossambicus collected from industrial waste. Fluorescence quenching assay using Rhodamine-B and mass detection assay using ESI-MS revealed that BPA was predominantly present in plastic industry effluent, where the fingerlings' ovaries exhibited early maturation. The histopathology of those fingerlings revealed a similar result. Both quantitative and qualitative data obtained by ELISA and FPLC showed elevated levels of vitellogenin in the fingerling stages after prolonged exposure to BPA present in the contaminated water. Our qRT-PCR data showed a subsequent increased expression of vitellogenin in those fingerlings obtained from contaminated effluent. FACS analysis suggested that BPA generated a significant amount of ROS in the livers of those fingerlings, leading to necrosis in hepatocytes.

Phytoremediation of VOCs from indoor air by ornamental potted plants: A pilot study using a palm species under the controlled environment

Volatile organic compounds (VOCs) in indoor air have recently raised public concern due to their adverse health effects. One of hazardous VOC is Formaldehyde which can cause sensory irritation and induce nasopharyngeal cancer. The aim of this study was to investigate potted plant-soil system ability in formaldehyde removal from indoor air. We applied one of common interior plant from the palm species, Chamaedorea elegans, inside a chamber under the controlled environment. Entire plant, growing media and roots contribution in formaldehyde were evaluated by continuously introduction of different concentrations of formaldehyde into the chamber (0.66-16.4 mg m^-3) each over a 48-h period. Our findings showed that the plant efficiently removed formaldehyde from polluted air by 65-100%, depending on the inlet concentrations, for a long time exposure. A maximum elimination capacity of 1.47 mg/m². h was achieved with an inlet formaldehyde concentration of 14.6 mg m^-3. The removal ratio of areal part to pot soil and roots was 2.45:1 (71%: 29%). The plants could remove more formaldehyde in light rather than dark environment. Concentrations up to 16.4 mg m^-3 were not high enough to affect the plants growth. However, a trivial decrease in chlorophyll content, carotenoid and water content of the treated plants was observed compared to the control plants. Thus, the palm species tested here showed high tolerance and good potential of formaldehyde removal from interior environments. Therefore, phytoremediation of VOCs from indoor air by the ornamental potted plants is an effective method which can be economically applicable in homes and offices.

Mechanisms by which Bisphenol A affect the photosynthetic apparatus in cucumber (Cucumis sativus L.) leaves

Bisphenol A (BPA), a widely distributed pollutant, suppresses photosynthesis in leaves. In previous studies on higher plants, the plants were treated by BPA through irrigation to root. This method cannot distinguish whether the BPA directly suppresses photosynthesis in leaves, or indirectly influences photosynthesis through affecting the function of root. Here, only the leaves but not the roots of cucumber were infiltrated with BPA solution. The photosystem II and I (PSII, PSI) were insensitive to BPA under darkness. BPA aggravated the PSII but not the PSI photoinhibition under light. BPA also inhibited CO₂ assimilation, and the effect of BPA on PSII photoinhibition disappeared when the CO₂ assimilation was blocked. The H₂O₂ accumulated in BPA-treated leaves under light. And the BPA-caused PSII photoinhibition was prevented under low (2%) O₂. We also proved that the BPA-caused PSII photoinhibition depend on the turnover of D1 protein. In conclusion, this study proved that BPA could directly suppress photosynthesis in leaves, however, BPA does not damage PSII directly, but inhibits CO₂ assimilation and over-reduces the electron transport chain under light, which increases the production of reactive oxygen species (H₂O₂), the over-accumulated ROS inhibits the turnover of D1 protein and consequently aggravates PSII photoinhibition.

Mechanisms by which Bisphenol A affect the photosynthetic apparatus in cucumber (Cucumis sativus L.) leaves

Bisphenol A (BPA), a widely distributed pollutant, suppresses photosynthesis in leaves. In previous studies on higher plants, the plants were treated by BPA through irrigation to root. This method cannot distinguish whether the BPA directly suppresses photosynthesis in leaves, or indirectly influences photosynthesis through affecting the function of root. Here, only the leaves but not the roots of cucumber were infiltrated with BPA solution. The photosystem II and I (PSII, PSI) were insensitive to BPA under darkness. BPA aggravated the PSII but not the PSI photoinhibition under light. BPA also inhibited CO₂ assimilation, and the effect of BPA on PSII photoinhibition disappeared when the CO₂ assimilation was blocked. The H₂O₂ accumulated in BPA-treated leaves under light. And the BPA-caused PSII photoinhibition was prevented under low (2%) O₂. We also proved that the BPA-caused PSII photoinhibition depend on the turnover of D1 protein. In conclusion, this study proved that BPA could directly suppress photosynthesis in leaves, however, BPA does not damage PSII directly, but inhibits CO₂ assimilation and over-reduces the electron transport chain under light, which increases the production of reactive oxygen species (H₂O₂), the over-accumulated ROS inhibits the turnover of D1 protein and consequently aggravates PSII photoinhibition.

Disruption of actin filaments in Zea mays by bisphenol A depends on their crosstalk with microtubules

Bisphenol A (BPA) is a widespread environmental pollutant, reportedly harmful to living organisms. In plant cells, BPA was shown to disrupt microtubule (MT) arrays and perturb mitosis, but its effects on filamentous actin (F-actin) have not been explored. Here we studied the effects of BPA on actin filaments (AFs) in meristematic root tip and leaf cells of Zea mays, by fluorescent labeling and confocal microscopy. Considering the typical dynamic interaction between MTs and AFs, the effects on these two essential components of the plant cytoskeleton were correlated. It was found that BPA disorganized rapidly AFs in a concentration- and time-dependent manner. The fine filaments were first to be affected, followed by the subcortical bundles, resulting in rod- and ring-like conformations. The observed differences in sensitivity between protodermal and cortex cells were attributed to the deeper location of the latter. Depolymerization or stabilization of MTs by relevant drugs (oryzalin, taxol) revealed that AF susceptibility to BPA depends on MT integrity. Developing leaves required harder and longer treatment to be affected by BPA. Ontogenesis of stomatal complexes was highly disturbed, arrangement of AFs and MT arrays was disordered and accuracy of cell division sequence was deranged or completely arrested. The effect of BPA confirmed that subsidiary cell mother cell polarization is not mediated by F-actin patch neither of preprophase band organization. On the overall, it is concluded that AFs in plant cells constitute a subcellular target of BPA and their disruption depends on their crosstalk with MTs.

Investigation of kinetics and absorption isotherm models for hydroponic phytoremediation of waters contaminated with sulfate

Two common wetland plants, Pampas Grass (Cortaderia selloana) and Lucky Bamboo (Dracaena sanderiana), were used in hydroponic cultivation systems for the treatment of simulated high-sulfate wastewaters. Plants in initial experiments at pH 7.0 removed sulfate more efficiently compared to the same experimental conditions at pH 6.0. Results at sulfate concentrations of 50, 200, 300, 600, 900, 1200, 1500 and 3000 mg/L during three consecutive 7-day treatment periods with 1-day rest intervals, showed decreasing trends of both removal efficiencies and uptake rates with increasing sulfate concentrations from the first to the second to the third 7-day treatment periods. Removed sulfate masses per unit dry plant mass, calculated after 23 days, showed highest removal capacity at 600 mg/L sulfate for both plants. A Langmuir-type isotherm best described sulfate uptake capacity of both plants. Kinetic studies showed that compared to pseudo first-order kinetics, pseudo-second order kinetic models slightly better described sulfate uptake rates by both plants. The Elovich kinetic model showed faster rates of attaining equilibrium at low sulfate concentrations for both plants. The dimensionless Elovich model showed that about 80% of sulfate uptake occurred during the first four days' contact time. Application of three 4-day contact times with 2-day rest intervals at high sulfate concentrations resulted in slightly higher uptakes compared to three 7-day contact times with 1-day rest intervals, indicating that pilot-plant scale treatment systems could be sized with shorter contact times and longer rest-intervals.

Stability of BiFeO3 nanoparticles via microwave-assisted hydrothermal synthesis in Fenton-like process

Stable catalysts require high catalytic efficiency and repeated consecutive use, low mass loss, and metal leaching. This study investigated BiFeO₃ (BFO) composite with high stability and reusability using a one step microwave-assisted hydrothermal method (MAHS) to decompose bisphenol A (BPA) used as the target contaminant. After six consecutive reaction cycles in microwave-enhanced Fenton-like process (MW-Fenton-like), the removal rate of BPA decreased from 94 to 87.4% with low metal leaching ratio and mass loss. The morphology, crystal, reaction kinetics, and hydroxyl radical (·OH) were used to demonstrate the high stability of BFO-MAHS. The results indicated that the benign stability and reusability of BFO-MAHS probably occurred because (1) the thermal-effect of MW improved heating rate, which led to the rapid formation stable cube structure and (2) MW mechanical vibrations existed in the preparation process, which further enhanced the cube structure. Therefore, MAHS could be used as a green and environmental friendly method to apply in catalysts synthesis, which could immensely shorten preparation time and enhance the catalytic performance with no waste production.

Bisphenol A Removal by Submerged Macrophytes and the Contribution of Epiphytic Microorganisms to the Removal Process

Bisphenol A (BPA), a typical endocrine disruptor, has been found in global aquatic environments, causing great concern. The capabilities of five common submerged macrophytes to remove BPA from water and the contributions of epiphytic microorganisms were investigated. Macrophytes removed 62%-100% of total BPA (5 mg/L) over 12 days; much higher rates than that observed in the control (2%, F = 261.511, p = 0.000). Ceratophyllum demersum was the most efficient species. C. demersum samples from lakes with different water qualities showed no significant differences in BPA removal rates. Moreover, removal, inhibition or re-colonization of epiphytic microorganisms did not significantly change the BPA removal rates of C. demersum. Therefore, the contributions of epiphytic microorganisms to the BPA removal process were negligible. The rate of BPA accumulation in C. demersum was 0.1%, indicating that BPA was mainly biodegraded by the macrophyte. Hence, submerged macrophytes, rather than epiphytic microorganisms, substantially contribute to the biodegradation of BPA in water.

Role of plant growth-promoting Ochrobactrum sp. MC22 on triclocarban degradation and toxicity mitigation to legume plants

Triclocarban (TCC) is an emerging and persistent pollutant once released into environment. In this study, TCC-degrading Ochrobactrum sp. MC22, was isolated and characterized. This is the first report on plant-growth promoting bacterium with versatile capability of TCC degradation under aerobic and anaerobic conditions. The aerobic degradation of TCC occurred completely of which the kinetic analysis revealed a non-self-inhibitive substrate effect, and broad-concentration-range degradation efficiency (ranging from 0.16-30mgL-1). Anaerobic TCC degradation was feasible, but was significantly enhanced up to 40-50% when ferric, or acetate was provided as electron donor, or acceptor, respectively. TCC biodegradation under both conditions was proposed to initially occur through hydrolysis leading to transient accumulation of chloroanilines, which could be completely metabolized and detoxified. With concern on TCC adverse effect to plants, role of MC22 on toxicity mitigation was investigated using two legume plants: Vigna radiata and Glycine max (L.) Merr. Upon TCC exposure, damage of both plant structures, especially root system was observed, but was substantially mitigated by MC22 bioaugmentation. This study not only provides thorough TCC degradation characteristic and kinetics of MC22, but also suggests a potential role of this bacterial strain for a rhizoremediation in crop area with TCC contamination.

Bisphenol-A removal by the halophyte Juncus acutus in a phytoremediation pilot: Characterization and potential role of the endophytic community

A phytoremediation pilot emulating a shallow aquifer planted with Juncus acutus showed to be effective for remediating Bisphenol-A (BPA) contaminated groundwater. Biostimulation with root exudates, low molecular weight organic acids, of J. acutus did not improve BPA-degradation rates. Furthermore, the endophytic bacterial community of J. acutus was isolated and characterized. Many strains were found to possess increased tolerance to metals such as Zn, Ni, Pb and Cd. Moreover, several endophytic bacterial strains tolerated and even used BPA and/or two antibiotics (ciprofloxacin and sulfamethoxazole) as a sole carbon source. Our results demonstrate that the cultivable bacterial endophytic community of J. acutus is able to use organic contaminants as carbon sources, tolerates metals and is equipped with plant-growth promoting traits. Therefore, J. acutus has potential to be exploited in constructed wetlands when co-contamination is one of the restricting factors.

Metagenomics: Probing pollutant fate in natural and engineered ecosystems

Polluted environments are a reservoir of microbial species able to degrade or to convert pollutants to harmless compounds. The proper management of microbial resources requires a comprehensive characterization of their genetic pool to assess the fate of contaminants and increase the efficiency of bioremediation processes. Metagenomics offers appropriate tools to describe microbial communities in their whole complexity without lab-based cultivation of individual strains. After a decade of use of metagenomics to study microbiomes, the scientific community has made significant progress in this field. In this review, we survey the main steps of metagenomics applied to environments contaminated with organic compounds or heavy metals. We emphasize technical solutions proposed to overcome encountered obstacles. We then compare two metagenomic approaches, i.e. library-based targeted metagenomics and direct sequencing of metagenomes. In the former, environmental DNA is cloned inside a host, and then clones of interest are selected based on (i) their expression of biodegradative functions or (ii) sequence homology with probes and primers designed from relevant, already known sequences. The highest score for the discovery of novel genes and degradation pathways has been achieved so far by functional screening of large clone libraries. On the other hand, direct sequencing of metagenomes without a cloning step has been more often applied to polluted environments for characterization of the taxonomic and functional composition of microbial communities and their dynamics. In this case, the analysis has focused on 16S rRNA genes and marker genes of biodegradation. Advances in next generation sequencing and in bioinformatic analysis of sequencing data have opened up new opportunities for assessing the potential of biodegradation by microbes, but annotation of collected genes is still hampered by a limited number of available reference sequences in databases. Although metagenomics is still facing technical and computational challenges, our review of the recent literature highlights its value as an aid to efficiently monitor the clean-up of contaminated environments and develop successful strategies to mitigate the impact of pollutants on ecosystems.

Green Disposal of Waste Bisphenol A

Bisphenol A (BPA) is an important precursor for polycarbonates and epoxy resins that are used to make products that many would consider essential for modern living. Unfortunately, BPA is an endocrine disrupter and more and more evidence is being uncovered about its negative effects on humans as well as on organisms in the environment. Sustainable chemistry means we take everything into account in designing a chemical process: the risks, the costs, the benefits, and so on. BPA is not likely to be replaced by a less toxic chemical in the foreseeable future, nor is our society willing to give up valuable polycarbonate products. As part of sustainable green chemistry, we want to assure that any toxic chemicals that leave a manufacturing plant pose a minimal risk to the environment. Using a green method to clean up effluent before it is released into the environment would be ideal. In this report, little bluestem seeds are shown to be capable of degrading BPA in aqueous solutions. This gives them the potential to be used in reducing the amount of BPA that may be in effluent. Additionally, an enzyme was isolated that was responsible for degrading BPA and this could also have potential for the treatment of effluent.

Fate of Bisphenol A in Terrestrial and Aquatic Environments

Bisphenol A (2,2-bis[4-hydroxyphenyl]propane, BPA), the monomer used to produce polycarbonate plastic and epoxy resins, is weakly estrogenic and therefore of environmental and human health interest. Due to the high production volumes and disposal of products made from BPA, polycarbonate plastic and epoxy resins, BPA has entered terrestrial and aquatic environments. In the presence of oxygen, diverse taxa of bacteria, fungi, algae and even higher plants metabolize BPA, but anaerobic microbial degradation has not been documented. Recent reports demonstrated that abiotic processes mediate BPA transformation and mineralization in the absence of oxygen, indicating that BPA is susceptible to degradation under anoxic conditions. This review summarizes biological and nonbiological processes that lead to BPA transformation and degradation, and identifies research needs to advance predictive understanding of the longevity of BPA and its transformation products in environmental systems.

Inverse modeling of the biodegradation of emerging organic contaminants in the soil-plant system

Understanding the processes involved in the uptake and accumulation of organic contaminants into plants is very important to assess the possible human risk associated with. Biodegradation of emerging contaminants in plants has been observed, but kinetical studies are rare. In this study, we analyse experimental data on the uptake of emerging organic contaminants into lettuce derived in a greenhouse experiment. Measured soil, root and leaf concentrations from four contaminants were selected within the applicability domain of a steady-state two-compartment standard plant uptake model: bisphenol A (BPA), carbamazepine (CBZ), triclosan (TCS) and caffeine (CAF). The model overestimated concentrations in most cases, when no degradation rates in plants were entered. Subsequently, biodegradation rates were fitted so that the measured concentrations were met. Obtained degradation kinetics are in the order, BPA < CAF ≈ TCS < CBZ in roots, and BPA ≈ TCS < CBZ << CAF in leaves. Kinetics determined by inverse modeling are, despite the inherent uncertainty, indicative of the dissipation rates. The advantage of the procedure that is additional knowledge can be gained from existing experimental data. Dissipation kinetics found via inverse modeling is not a conclusive proof for biodegradation and confirmation by experimental studies is needed.

Effect of the pollution level on the functional bacterial groups aiming at degrading bisphenol A and nonylphenol in natural biofilms of an urban river

Bisphenol A (BPA) and 4-nonylphenol (NP) are ubiquitous pollutants with estrogenic activity in aquatic environment and have attracted global concern due to their disruption of endocrine systems. This study investigated the spatial distribution characteristics of the bacterial groups involved in the degradation of BPA and NP within biofilms in an urban river using terminal restriction fragment length polymorphism based on 16S rRNA gene sequences. The effects of the pollution level and water parameters on these groups were also assessed. Hierarchical cluster analysis grouped the sampling sites into three clusters reflecting their varying nutrient pollution levels of relatively slight pollution (SP), moderate pollution (MP), and high pollution (HP) based on water quality data and Environmental Quality Standard for Surface Water of China (GB3838-2002). The BPA and NP concentration in river water ranged from 0.8 to 77.5 and 10.2 to 162.9 ng L(-1), respectively. Comamonadaceae, Pseudomonadaceae, Alcaligenaceae, Bacillaceae, Sphingomonadacea, Burkholderiaceae, and Rhizobiaceae were the dominant bacterial taxa involved in BPA and NP degradation, comprising an average of 9.8, 8.1, 7.6, 6.7, 6.2, 4.1, and 2.8 % of total sequences, respectively. The total abundance of these groups showed a slight upward trend and subsequently rapidly decreased with increasing pollution levels. The average proportion of Comamonadaceae in MP river sections was almost 1.5-2 times than that in SP or HP one. The distribution of functional groups was found related to environmental variables, especially pH, conductivity, ammonium nitrogen (NH3-N), and BPA. The abundance of Comamonadaceae and Rhizobiaceae was both closely related to higher values of pH and conductivity as well as lower concentrations of NP and BPA. Alcaligenaceae and Pseudomonadaceae were associated with higher concentrations of TP and CODMn and inversely correlated with DO concentration. This study might provide effective data on bacterial group changes in polluted urban rivers.

Phyto-enhanced remediation of soil co-contaminated with lead and diesel fuel using biowaste and Dracaena reflexa: A laboratory study

In phytoremediation of co-contaminated soil, the simultaneous and efficient remediation of multiple pollutants is a major challenge rather than the removal of pollutants. A laboratory-scale experiment was conducted to investigate the effect of 5% addition of each of three different organic waste amendments (tea leaves, soy cake, and potato skin) to enhance the phytoaccumulation of lead (60 mg kg(-1)) and diesel fuel (25,000 mg kg(-1)) in co-contaminated soil by Dracaena reflexa Lam for a period of 180 day. The highest rate of oil degradation was recorded in co-contaminated soil planted with D. reflexa and amended with soy cake (75%), followed by potato skin (52.8%) and tea leaves (50.6%). Although plants did not accumulate hydrocarbon from the contaminated soil, significant bioaccumulation of lead in the roots and stems of D. reflexa was observed. At the end of 180 days, 16.7 and 9.8 mg kg(-1) of lead in the stems and roots of D. reflexa were recorded, respectively, for the treatment with tea leaves. These findings demonstrate the potential of organic waste amendments in enhancing phytoremediation of oil and bioaccumulation of lead.

Toxicological effects of bisphenol A on growth and antioxidant defense system in Oryza sativa as revealed by ultrastructure analysis

The present study was conducted to evaluate the effect of bisphenol A (BPA) on rice seedlings grown in a hydroponic system. The obtained results demonstrated that at lower concentration (up to 10µM) BPA had some stimulatory effects on the growth of rice seedlings but at higher doses it significantly inhibited seedlings growth. The photosynthetic pigments were significantly decreased by high doses of BPA. Exposure to BPA caused increased membrane permeability in root cells and resulted in increased concentration of reactive oxygen species (ROS) and increased lipid peroxidation as revealed by thiobarbituric acid reactive substances (TBARS) assay. In leaves, superoxide dismutase (SOD) activity exhibited an increase at lower concentrations of BPA but was inhibited at the highest dose (200µM) of BPA. At 100µM of BPA, a significant increase in antioxidant activities in leaves was observed but at 200µM this activity was inhibited. In roots, a significant decrease in enzymes activity was recorded at the highest concentration of BPA (200µM); however, ascorbate peroxidase (APX) and catalase (CAT) activities were significantly increased at the concentrations of 10 and 50µM in comparison to the control. Moreover, the present results revealed that BPA severely affected cell organelles in rice seedlings. It can be concluded that the observed adverse effects in rice seedlings by BPA in the present study could be attributed to the oxidative stress caused by BPA.

The in vivo estrogenic modulatory effect of bisphenol A (BPA) on Oreochromis mossambicus and prevention of early maturation of ovary by conjugates of intracellular laccase and silica nanoparticles

Immobilized laccase can significantly reduce thein vivoestrogenic effect of BPA and protect organisms from endocrine disrupting effect and extinction.

Biotransformations of bisphenols mediated by a novel Arthrobacter sp. strain YC-RL1

Arthrobacter sp. strain YC-RL1, capable of utilizing bisphenol A (BPA) as sole carbon source for growth, was isolated from petroleum contaminated soil. YC-RL1 could rapidly degrade BPA in a wide range of pH (5.0-9.0) and temperature (20-40 °C). Substrate analysis found that YC-RL1 could also degrade bisphenol F (BPF) and tetrabromobisphenol A (TBBPA). The maximum and minimum concentrations of BPA (0.2-600 mg/L), BPF (0.2-600 mg/L), and TBBPA (0.2-300 mg/L) for efficient biodegradation were detected. The released bromide ion and metabolic intermediates of BPF and BPA/TBBPA were detected, as well as the degradation pathways for BPF and BPA/TBBPA were deduced tentatively. The present study provides important information for the investigation of BPs degrading mechanism and the application of microbial remediation in BP-contaminated environment. This study is the first report about a genus Arthrobacter bacterium which could simultaneously degrade BPA, BPF, and TBBPA.

Effects of bisphenol A on chlorophyll synthesis in soybean seedlings

Bisphenol A (BPA), as an emerging environmental pollutant, is potentially harmful to plant growth. Chlorophyll (Chl) is critical in photosynthesis that provides matter and energy for plant growth. How BPA affects the chlorophyll content remains largely unknown. Here, the effects of BPA on Chl synthesis in soybean seedlings were investigated. Exposure to 1.5 mg/L BPA decreased the 5-aminolevulinic acid (ALA) content and increased protoporphyrin IX (Proto IX), magnesium protoporphyrin, and protochlorophyll contents and 5-aminolaevulinic acid dehydratase, porphobilinogen deaminase, uroporphyrinogen III synthase, uroporphyrinogen III decarboxylase, and protoporphyrinogen oxidase activities. Exposure to 17.2 and 50.0 mg/L BPA exerted the opposite effects on these four intermediates and five enzymes. Following the withdrawal of BPA exposure, the aforementioned parameters gradually recovered, except magnesium protoporphyrin content in exposure to 50.0 mg/L BPA. Our findings revealed that exposure to low-concentration BPA increased the Chl content in soybean seedlings through improving Chl synthesis, especially the conversion from ALA to Proto IX, whereas exposure to high-concentration BPA decreased the Chl content through inhibiting Chl synthesis, especially the conversion from ALA to Proto IX. The dual effects of BPA were largely reversed following the withdrawal of BPA exposure.

The molecular mechanism of bisphenol A (BPA) as an endocrine disruptor by interacting with nuclear receptors: insights from molecular dynamics (MD) simulations

Bisphenol A (BPA) can interact with nuclear receptors and affect the normal function of nuclear receptors in very low doses, which causes BPA to be one of the most controversial endocrine disruptors. However, the detailed molecular mechanism about how BPA interferes the normal function of nuclear receptors is still undiscovered. Herein, molecular dynamics simulations were performed to explore the detailed interaction mechanism between BPA with three typical nuclear receptors, including hERα, hERRγ and hPPARγ. The simulation results and calculated binding free energies indicate that BPA can bind to these three nuclear receptors. The binding affinities of BPA were slightly lower than that of E2 to these three receptors. The simulation results proved that the binding process was mainly driven by direct hydrogen bond and hydrophobic interactions. In addition, structural analysis suggested that BPA could interact with these nuclear receptors by mimicking the action of natural hormone and keeping the nuclear receptors in active conformations. The present work provided the structural evidence to recognize BPA as an endocrine disruptor and would be important guidance for seeking safer substitutions of BPA.

Biocides in hydraulic fracturing fluids: a critical review of their usage, mobility, degradation, and toxicity

Biocides are critical components of hydraulic fracturing ("fracking") fluids used for unconventional shale gas development. Bacteria may cause bioclogging and inhibit gas extraction, produce toxic hydrogen sulfide, and induce corrosion leading to downhole equipment failure. The use of biocides such as glutaraldehyde and quaternary ammonium compounds has spurred a public concern and debate among regulators regarding the impact of inadvertent releases into the environment on ecosystem and human health. This work provides a critical review of the potential fate and toxicity of biocides used in hydraulic fracturing operations. We identified the following physicochemical and toxicological aspects as well as knowledge gaps that should be considered when selecting biocides: (1) uncharged species will dominate in the aqueous phase and be subject to degradation and transport whereas charged species will sorb to soils and be less bioavailable; (2) many biocides are short-lived or degradable through abiotic and biotic processes, but some may transform into more toxic or persistent compounds; (3) understanding of biocides' fate under downhole conditions (high pressure, temperature, and salt and organic matter concentrations) is limited; (4) several biocidal alternatives exist, but high cost, high energy demands, and/or formation of disinfection byproducts limits their use. This review may serve as a guide for environmental risk assessment and identification of microbial control strategies to help develop a sustainable path for managing hydraulic fracturing fluids.

Decontamination activity of ryegrass exudates towards bisphenol A in the absence and presence of dissolved natural organic matter

Bisphenol A (BPA) is an endocrine disruptor compound widespread in terrestrial and aquatic systems of urbanized and industrialized regions. This study evaluated the capacity of ryegrass (Lolium perenne) aqueous exudates to degrade BPA at a concentration of 10 mg L(-1) both in the absence and in the presence of an organic fraction often coexisting with plant exudates, i.e., natural organic matter (NOM), tested at a concentration of 20 mg L(-1). In exudates alone, BPA degradation ceased after one day from the product addition when residual BPA resulted 65% of the initial BPA, whereas in exudates with the addition of NOM the degradation process continued for 4 days when residual BPA resulted 49%. Measurements of peroxidase and laccase activities in exudates suggested a significant involvement of these enzymes in BPA degradation. This finding was further confirmed by the almost complete absence of BPA degradation in aqueous exudates strongly acidified. In some BPA-contaminated exudates, chromatographic analysis revealed the presence of a newly formed compound identified as a BPA oxidation product by Fourier transform - ion cyclotron resonance mass spectrometry analysis. In conclusion, ryegrass exudates possess a relevant decontamination capacity towards BPA which persists and appears to be enhanced by the addition of NOM.

Biodegradation of bisphenol A by the newly-isolated Enterobacter gergoviae strain BYK-7 enhanced using genetic manipulation

Endogenous bacterial strains possessing a high bisphenol A (BPA)-tolerance/degradation activity were isolated from different outlets of petrochemical wastewater in Iran using the enrichment cultivation approach.

Bisphenol A--sources, toxicity and biotransformation

Bisphenol A (BPA) is a chemical compound used in massive amounts in the production of synthetic polymers and thermal paper. In this review, the sources of BPA, which influence its occurrence in the environment and human surrounding will be presented. Data concerning BPA occurrence in food, water and indoor environments as well as its appearance in tissues and body fluids of human body will be shown. The results of in vitro and in vivo studies and the results of epidemiological surveys showing toxic, endocrine, mutagenic and cancerogenic action of BPA will also be discussed. Moreover, data suggesting that exposure of human to BPA may elevate risk of obesity, diabetes and coronary heart diseases will be presented. Finally, biotransformation of BPA in animals, plants and microorganisms (bacteria, fungi, algae), resulting in the formation of various metabolites that exhibit different from BPA toxicity will be described.