One-step green synthesis of bimetallic Fe/Pd nanoparticles used to degrade Orange II

Enhanced reduction of Cd uptake by wheat plants using iron and manganese oxides combined with citrate in Cd-contaminated weakly alkaline arable soils

Iron (Fe) and manganese (Mn) oxides can be used to remediate Cd-polluted soils due to their excellent performance in heavy metal adsorption. However, their remediation capability is rather limited, and a higher content of available Mn and Fe in soils can reduce Cd accumulation in wheat plants due to the competitive absorption effect. In this study, goethite and cryptomelane were first respectively used to immobilize Cd in Cd-polluted weakly alkaline soils, and sodium citrate was then added to increase the content of available Mn and Fe content for further reduction of wheat Cd absorption. In the first season, the content of soil-available Cd and Cd in wheat plants significantly decreased when cryptomelane, goethite and their mixture were used as the remediation agents. Cryptomelane showed a better remediation effect, which could be attributed to its higher adsorption performance. The grain Cd content could be decreased from 0.35 mg kg-1 to 0.25 mg kg-1 when the content of cryptomelane was controlled at 0.5%. In the second season, when sodium citrate at 20 mmol kg-1 was further added to the soils with 0.5% cryptomelane treatment in the first season, the content of soil available Cd was increased by 14.8%, and the available Mn content was increased by 19.5%, leading to a lower Cd content in wheat grains (0.16 mg kg-1) probably due to the competitive absorption. This work provides a new strategy for the remediation of slightly Cd-polluted arable soils with safe and high-quality production of wheat.

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Highly Efficient Cauliflower-like Palladium-Loaded Porous MOF as a Robust Material for the Degradation of Organic Dyes

A series of porous MOF materials, viz., Pdx@IRMOF-9 (x = 2, 5, and 10%) were synthesized by loading varying concentrations of Pd(II) on IRMOF-9. The synthesized MOF materials were characterized by ltravioletisible (UV-Vis) spectroscopy, Fourier transform Infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) analyses. UV, FT-IR, and PXRD data of Pd(II)@IRMOF-9 were found to be in line with those of IRMOF-9, which suggests that the structure of the IRMOF-9 remained intact upon Pd(II) loading. Surface morphology of IRMOF-9 showed sheet-like structures, and upon incorporation of Pd(II) to IRMOF-9, porous cauliflower-shaped MOFs were obtained. The SEM area mapping of Pd10%@IRMOF-9 confirmed the homogeneous dispersion of Pd(II) on IRMOF-9. BET measurements suggested an increase in the surface area as well as pore size upon incorporation of Pd(II) on IRMOF-9. Due to high porosity and high petal density, Pd10%@IRMOF-9 demonstrated degradation of seven organic dyes, namely, orange G, methylene blue, methyl orange, congo red , methyl red, rhodamine 6G, and neutral red. It showed excellent results with >90% dye degradation efficiency in case of cationic, anionic as well as neutral dyes. Degradation of organic dyes followed the pseudo-first-order kinetics. Kinetic parameters, KM and Vmax, were calculated using the double reciprocal Lineweaver-Burk plot and were found to be 13.2 μM and 26.68 × 10-8 M min-1, respectively. Recyclability studies of heterogeneous Pd10%@IRMOF-9 demonstrated the degradation of CR dye for five consecutive cycles without significant loss of its catalytic activity. Herein, a robust and efficient material for the degradation of organic dyes has been developed and demonstrated.

High reusability and adsorption capacity of acid washed calcium alginate/chitosan composite hydrogel spheres in the removal of norfloxacin

Calcium alginate (CA) hydrogel spheres were widely used as adsorbents to remove organics, but their adsorption capacities and reusability to some antibiotics are unsatisfactory. In this study, calcium alginate/chitosan (CA/CTS) hydrogel spheres were prepared as precursors. Acid-washed CA/CTS (CA/CTS-M) hydrogel spheres (310.6 mg/g) behaved much better adsorption capacity of norfloxacin (NOR) than CA (69.5 mg/g) and CA/CTS (87.7 mg/g) hydrogel spheres. Astonishingly, after being reused for 15 cycles, CA/CTS-M has no loss of NOR adsorption capacity. In the original idea, acid wash was expected to remove the chitosan in CA/CTS hydrogel spheres for obtaining a larger specific surface area. Both scanning electron microscopy and Brunauer-Emmett-Teller test showed that acid wash can remove CTS from CA/CTS hydrogel spheres to increase the specific surface area. However, part of the chitosan remained in CA/CTS-M, having a role to enhance the structural stability of the material, because the acid-washed CA (about 2 mm) has a significantly smaller diameter than CA/CTS-M (about 3 mm). According to the influence of pH and density functional theory calculations, electrostatic attraction is the key driving force of NOR adsorption. Importantly, acid wash led to more negative-charged surface characterized by Zeta potential, which is the main reason of the significantly enhanced adsorption capacity of CA/CTS-M in removal of NOR. In short, CA/CTS-M hydrogel spheres are environment friendly and highly stable adsorbents with high adsorption capacity in the removal of NOR.

Colloidal metal nanocatalysts to advance orange II hydrogenolysis tracked by a microplate reader

The thermal reduction method was applied to synthesize metal nanoparticles using poly(1-vinyl-2-pyrrolidone) as an organic stabilizer to control metal nanoparticle agglomeration. Colloidal metal nanoparticles, gold, palladium, and gold–palladium nanoparticles were synthesized, and UV–visible spectrophotometry and high-resolution transmission electron microscopy analyses were conducted to characterize them. The metal nanoparticle micrographs showed well-dispersed particles with an average size of 9.6 nm (Au), 15.4 nm (Pd), and 10.6 nm (AuPd). All the colloidal metal nanoparticles served as nanocatalysts to advance a reductive degradation of orange II in presence of borohydride ions. For a prompt screening of catalytic activity, the microplate reader system was considered at a fixed maximum absorbance wavelength of λ 489 nm respected by orange II. Excess borohydride ions were used to construct pseudo-first kinetic conditions. The Langmuir–Hinshelwood model allowed the finding of kinetic activity on the surface of metal nanoparticles. AuPd nanocatalyst interface exhibited low activation energy (5.38 kJ mol−1) compared to the one on Au (8.19 kJ mol−1) and Pd (7.23 kJ mol−1).

Graphical Abstract

Bryophyllum pinnatum leaf extract mediated ZnO nanoparticles with prodigious potential for solar driven photocatalytic degradation of industrial contaminants

In an era of environment-friendly development plant extract-based biological techniques for synthesizing nanoparticles have gained a lot of attention over traditionally famous chemical and physical synthesis techniques. In the present study we have synthesized biogenic zinc oxide nanoparticles (BPLE-ZnO NPs) using Bryophyllum pinnatum leaf extract, compared its native properties and solar-driven photocatalytic activity with chemically prepared ZnO nanoparticles (Chem-ZnO NPs). In order to characterize and compare the Chem-ZnO and BPLE-ZnO, various techniques were used, including UV-visible spectroscopy, x-ray diffractrometry, photoluminescence spectroscopy, field emission scanning electron microscopy, electron dispersive x-ray spectroscopy, fourier transform infrared spectroscopy, and zeta potential analyzer. The results revealed the formation of hexagonal wurtzite ZnO, with no significant difference between the two methods; however, the use of Bryophyllum pinnatum leaf extract in ZnO NPs synthesis resulted in reduced size, presence of biomolecules on its surface and better monodispersity than purely chemical synthesis. Further, the BPLE-ZnO NPs showed better efficiency in the solar-driven photocatalytic degradation of methylene blue (MB) dye compared to Chem-ZnO NPs. Under solar exposure at a dose of 0.50 mg/mL BPLE-ZnO, resulted in 97.31% photodegradation with a rate constant of 0.06 min-1 of 20 mg/L MB solution within just 60 min which was 9.51% higher compared to the Chem-ZnO NPs. The BPLE-ZnO NPs were also employed to investigate their solar-driven photocatalytic performance for degrading the pharmaceutical (Metronidazole and Amoxycillin) and textile pollutants (Methyl orange dye) under sunlight. The results show that Bryophyllum pinnatum leaf extract-mediated ZnO NPs have an excellent potential in solar-based photocatalytic applications.

Advances in Matrix-Supported Palladium Nanocatalysts for Water Treatment

Advanced catalysts are crucial for a wide range of chemical, pharmaceutical, energy, and environmental applications. They can reduce energy barriers and increase reaction rates for desirable transformations, making many critical large-scale processes feasible, eco-friendly, energy-efficient, and affordable. Advances in nanotechnology have ushered in a new era for heterogeneous catalysis. Nanoscale catalytic materials are known to surpass their conventional macro-sized counterparts in performance and precision, owing it to their ultra-high surface activities and unique size-dependent quantum properties. In water treatment, nanocatalysts can offer significant promise for novel and ecofriendly pollutant degradation technologies that can be tailored for customer-specific needs. In particular, nano-palladium catalysts have shown promise in degrading larger molecules, making them attractive for mitigating emerging contaminants. However, the applicability of nanomaterials, including nanocatalysts, in practical deployable and ecofriendly devices, is severely limited due to their easy proliferation into the service environment, which raises concerns of toxicity, material retrieval, reusability, and related cost and safety issues. To overcome this limitation, matrix-supported hybrid nanostructures, where nanocatalysts are integrated with other solids for stability and durability, can be employed. The interaction between the support and nanocatalysts becomes important in these materials and needs to be well investigated to better understand their physical, chemical, and catalytic behavior. This review paper presents an overview of recent studies on matrix-supported Pd-nanocatalysts and highlights some of the novel emerging concepts. The focus is on suitable approaches to integrate nanocatalysts in water treatment applications to mitigate emerging contaminants including halogenated molecules. The state-of-the-art supports for palladium nanocatalysts that can be deployed in water treatment systems are reviewed. In addition, research opportunities are emphasized to design robust, reusable, and ecofriendly nanocatalyst architecture.

Green Synthesis and Characterization of ZnO Nanoparticles Using Pelargonium odoratissimum (L.) Aqueous Leaf Extract and Their Antioxidant, Antibacterial and Anti-inflammatory Activities

Nanoparticles (NPs) exhibit distinct features compared to traditional physico-chemical synthesis and they have many applications in a wide range of fields of life sciences such as surface coating agents, catalysts, food packaging, corrosion protection, environmental remediation, electronics, biomedical and antimicrobial. Green-synthesized metal NPs, mainly from plant sources, have gained a lot of attention due to their intrinsic characteristics like eco-friendliness, rapidity and cost-effectiveness. In this study, zinc oxide (ZnO) NPs have been synthesized employing an aqueous leaf extract of Pelargonium odoratissimum (L.) as a reducing agent; subsequently, the biosynthesized ZnO NPs were characterized by ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). Moreover, aqueous plant leaf extract was subjected to both qualitative and quantitative analysis. Antioxidant activity of ZnO NPs was assessed by DPPH assay, with varying concentrations of ZnO NPs, which revealed scavenging activity with IC₅₀ = 28.11 μg mL⁻¹. Furthermore, the anti-bacterial efficacy of the green synthesized ZnO NPs against four foodborne pathogenic bacterial strains was examined using the disk diffusion assay, and Staphylococcus aureus (ATCC 8095), Pseudomonas aeruginosa (ATCC10662) and Escherichia coli (ATCC 25922) were found to be the most sensitive against biosynthesized ZnO NPs, whereas the least sensitivity was shown by Bacillus cereus (ATCC 13753). The anti-inflammatory effect was also evaluated for both ZnO NPs and the aqueous leaf extract of P. odoratissimum through the human red blood cells (HRBC) membrane stabilization method (MSM) in vitro models which includes hypotonicity-induced hemolysis. A maximum membrane stabilization of ZnO NPs was found to be 95.6% at a dose of 1000 μg mL⁻¹ compared with the standard indomethacin. The results demonstrated that leaf extract of P. odoratissimum is suitable for synthesizing ZnO NPs, with antioxidant, antibacterial as well as superior anti-inflammatory activity by improving the membrane stability of lysosome cells, which have physiological properties similar to erythrocyte membrane cells and have no hemolytic activity. Overall, this study provides biosynthesized ZnO NPs that can be used as a safe alternative to synthetic substances as well as a potential candidate for antioxidants, antibacterial and anti-inflammatory uses in the biomedical and pharmaceutical industries.

Utility of Biogenic Iron and Its Bimetallic Nanocomposites for Biomedical Applications: A Review

Nanotechnology mainly deals with the production and application of compounds with dimensions in nanoscale. Given their dimensions, these materials have considerable surface/volume ratios, and hence, specific characteristics. Nowadays, environmentally friendly procedures are being proposed for fabrication of Fe nanoparticles because a large amount of poisonous chemicals and unfavorable conditions are needed to prepare them. This work includes an inclusive overview on the economical and green procedures for the preparation of such nanoparticles (flower, fruits, tea, carbohydrates, and leaves). Pure and bimetallic iron nanoparticles, for instance, offer a high bandwidth and excitation binding energy and are applicable in different areas ranging from antibacterial, anticancer, and bioimaging agents to drug delivery systems. Preparation of nano-sized particles, such as those of Fe, requires the application of high quantities of toxic materials and harsh conditions, and naturally, there is a tendency to develop more facile and even green pathways (Sultana, Journal of Materials Science & Technology, 2013, 29, 795–800; Bushra et al., Journal of hazardous materials, 2014, 264, 481–489; Khan et al., Ind. Eng. Chem. Res., 2015, 54, 76–82). This article tends to provide an overview on the reports describing green and biological methods for the synthesis of Fe nanoparticles. The present review mainly highlights selenium nanoparticles in the biomedical domain. Specifically, this review will present detailed information on drug delivery, bioimaging, antibacterial, and anticancer activity. It will also focus on procedures for their green synthesis methods and properties that make them potential candidates for various biomedical applications. Finally, we provide a detailed future outlook.

Degradation of sulfamethazine in water by sulfite activated with zero-valent Fe-Cu bimetallic nanoparticles

In this work, zero-valent Fe-Cu bimetallic nanoparticles were synthesized using a facile method, and applied to activate sulfite for the degradation of sulfamethazine (SMT) from the aqueous solution. The key factors influencing SMT degradation were investigated, namely the theoretical loading of Cu, Fe-Cu catalyst dosage, sulfite concentration and initial solution pH. The experimental results showed that the Fe-Cu/sulfite system exhibited a much better performance in SMT degradation than the bare Fe⁰/sulfite system. The mechanism and possible degradation pathway of SMT in Fe-Cu/sulfite system were revealed. The reactive radicals that played a dominant role in the SMT degradation process were •OH and SO₄^•-, while the loading of Cu induced the synergistic effect between Fe and Cu. The redox cycle between Cu(I)/Cu(II) remarkably contributed to the conversion of Fe(III) to Fe(II), greatly enhancing the catalytic performance of Fe-Cu bimetal. In real groundwater applications, the Fe-Cu/sulfite system also exhibited satisfactory SMT degradation. The 30-day aging tests of Fe-Cu particles demonstrated that the aging of catalyst was not obviously affecting the removal of SMT. Furthermore, the reusability of catalyst was evidenced by the recycling experiments. This study provides a promising application of bimetal activated sulfite for enhanced contaminant degradation in groundwater.

Applicability of bio-synthesized nanoparticles in fungal secondary metabolites products and plant extracts for eliminating antibiotic-resistant bacteria risks in non-clinical environments

The abundance of antibiotic-resistant bacteria in the prawn pond effluents can substantially impact the natural environment. The settlement ponds, which are the most common treatment method for farms wastewater, might effectively reduce the suspended solids and organic matter. However, the method is insufficient for bacterial inactivation. The current paper seeks to highlight the environmental issue associated with the distribution of antibiotic resistant bacteria (ARB) from prawn farm wastewater and their impact on the microbial complex community in the surface water which receiving these wastes. The inactivation of antibiotic-resistant bacteria in prawn wastewater is strongly recommended because the presence of antibiotic-resistant bacteria in the environment causes water pollution and public health issues. The nanoparticles are more efficient for bacterial inactivation. They are widely accepted due to their high chemical and mechanical stability, broad spectrum of radiation absorption, high catalytic activity, and high antimicrobial activity. Many studies have examined the use of fungi or plants extract to synthesis zinc oxide nanoparticles (ZnO NPs). It is evident from recent papers in the literature that green synthesized ZnO NPs from microbes and plant extracts are non-toxic and effective. ZnO NPs inactivate the bacterial cells as a function for releasing reactive oxygen species (ROS) and zinc ions. The inactivation of antibiotic-resistant bacteria tends to be more than 90% which exhibit strong antimicrobial behavior against bacterial species.

Sunlight-induced photocatalytic degradation of organic pollutants by biosynthesized hetrometallic oxides nanoparticles

Dyes and phenols are extensively used chemicals in petrochemicals, pharmaceuticals, textile, and paints industries. Due to high persistence, bioaccumulation, and toxicity, their removal from the environment is highly imperative by advanced techniques. Single metal oxide nanomaterials are generally associated with limitations of large bandgap (> 3eV) and charge recombination. Therefore, heterometallic oxides (HMOs) as CuFe₂O₄, CuMn₂O₄, and MnZn₂O₄ have been synthesized via green route by employing leaf extract of Azadirachta indica. XRD revealed the crystalline nature of HMOs nanospheres with particle size less than 100 nm. Subsequently, HMOs nanocatalysts were used as photocatalyst for removal of 3-amino phenols (3-AP) and eriochrome black T (EBT) from water under sunlight. Reaction parameters namely pollutant concentration (50-130 mgL^-1), catalyst dose (20-100 mg), and pH (3-11) were optimized in order to get best results. Substantial degradation (80-95%) of pollutants (50 mgL^-1) by HMOs (80 mg) was achieved at neutral pH under sunlight exposure. Highest removal by CuFe₂O₄ might be due to its high surface area (35.7 m²g^-1), low band gap (2.4 eV), larger particle stability (Zeta potential: -22.0 mV), and lower photoluminescence intensity. Sharp declines in curves were visually confirmed by color change and indicated for first-order kinetics of degradation with initial Langmuir adsorption. Spectrophotometric analysis revealed that half-life (t_1/2) of 3-AP (0.9-1.7 h) and EBT (0.6-0.8 h) were significantly reduced. Faster degradation of EBT than 3-AP was because of less electronegative N-atom at the diazo group. Scavenger analysis indicated the presence of active radicals in photo-catalytic degradation of 3-AP and EBT. All HMOs have shown high reusability (n=8) which ensures their stability, sustainability, and efficiency. Overall, green synthesized HMOs nanoparticles with prominent surface characteristics offer a viable alternative photocatalyst for industrial applications.

Removal of organic compounds by nanoscale zero-valent iron and its composites

During the latest several decades, the continuous development of the economy and industry has brought more and more serious organic pollutants to the natural environment, which have inevitably aroused severe menace to human health and the environmental system. The nano zero-valent iron (NZVI) particles and NZVI-based materials have widely applied to remove organic pollutants. This article reviews the key advancements of different methods for the synthesis of NZVI and NZVI-based materials. Different modification methods (e.g., doped NZVI, encapsulated NZVI and supported NZVI) are also introduced detailedly for overcoming the defects of NZVI such as aggregation and easy oxidation. The removal of different organic pollutants including dyes, halogenated organic compounds, nitro-organic compounds, phenolic compounds, pesticides, and antibiotics are summarized. The interaction mechanisms, including adsorption, reduction, and active oxidation of organic pollutants by NZVI/NZVI-based composites, are discussed. The dyes are mainly removed by destroying their chromogenic group according to the reduction or the Fenton-like reaction with NZVI. The removal of halogenated organic compounds (HOCs) is realized by the dehalogenation process, including reductive elimination, hydrogenolysis, and hydrogenation. As for the nitro-organic compounds, three different reduction pathways as nitro-reduction (into amino), cleavage at the carbon‑nitrogen bond or denitration of the NO₂ group may take effect. The phenolic compounds can be mineralized into inorganic molecules, including CO₂ and H₂O, by Fenton oxidation. This review might provide the basis for future studies on developing more effective NZVI-based materials for the treatment of wastewaters contaminated by organic pollutants.

Visible-Light-Active CuO x -Loaded Mo-BiVO4 Photocatalyst for Inactivation of Harmful Bacteria (Escherichia coli and Staphylococcus aureus) and Degradation of Orange II Dye

In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.

Removal mechanism of Sb(III) by a hybrid rGO-Fe/Ni composite prepared by green synthesis via a one-step method

The annual influx of antimony (Sb) into the environment due to the widespread use of Sb compounds in industry and agriculture has become of global concern. Herein, a functional nanomaterial composite based on loading bimetallic iron/nickel nanoparticles on reduced graphene oxide (rGO-Fe/Ni) was initially prepared in a one-step phytogenic synthesis using a green tea extract. Subsequently, when applied for Sb(III) removal, the removal efficiency of rGO-Fe/Ni reached 69.7% within 3 h at an initial Sb concentration of 1.0 mg·L^-1. Advanced materials characterization via scanning electron microscopy-energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy revealed that Sb(III) was initially adsorbed onto the surface of rGO and then oxidized to Sb(V). This result was also supported by adsorption isotherm, kinetics, and thermodynamic analysis. These studies revealed that the adsorption was spontaneous and endothermic, following a Langmuir adsorption model with pseudo-second-order kinetics and allowed a Sb(III) removal mechanism based on adsorption and catalytic oxidation to be proposed. Furthermore, when rGO-Fe/Ni was practically used to remove Sb(III) in groundwater a 95.7% removal efficiency was obtained at 1 mg·L^-1 Sb(III), thus successfully demonstrating that rGO-Fe/Ni has significant potential for the practical remediation of Sb contaminated groundwater.

Development of biogenic bimetallic Pd/Fe nanoparticle-impregnated aerobic microbial granules with potential for dye removal

The objective of this study was to develop bimetallic core-shell Pd/Fe nanoparticles on the surface of aerobic microbial granules (Bio-Pd/Fe) and to evaluate their dye removal potential using a representative dye, methyl orange (MO). The aerobic microbial granules (1.5 ± 0.32 mm) were grown for 70 days in a 3-L glass sequencing batch reactor (SBR) with a 12-h cycle time. The Bio-Pd/Fe formation was catalyzed by the Bio-H₂ gas produced by the granules. The developed Bio-Pd/Fe was further used for MO removal from aqueous solutions, and the reaction parameters were optimized by response surface methodology (RSM). The XRD, SEM, EDAX, elemental mapping, and XPS studies confirmed the formation of Bio-Pd/Fe. Under the optimized removal conditions, 99.33% MO could be removed by Bio-Pd/Fe, whereas removal by Bio-Pd, Bio-Fe, aerobic microbial granules, and heat-killed granules were found to be quite low (68.91 ± 0.2%, 76.8 ± 0.3%, 19.8 ± 0.6%, and 6.59 ± 0.2%, respectively). The mechanism of removal was investigated by UV-visible spectroscopy, redox potential analysis, HR-LCMS analyses of the solution phase, and XRD and XPS analyses of the solid sorbent. The degradation products of MO exhibited m/z values corresponding to 292, 212, and 160 m/z. The remnant toxicity of the intermediate degradation products was analysed using freshwater algae, Scenedesmus sp. And Allium cepa, as indicator organisms. These assays suggested that after the treatment with Bio-Pd/Fe, MO was transformed to a lesser toxic form.

Unveiling the role of novel biogenic functionalized CuFe hybrid nanocomposites in boosting anticancer, antimicrobial and biosorption activities

The quest for eco-friendly and biocompatible nanoparticles (NPs) is an urgent issue in the agenda of the scientific community and applied technology, which compressing synthesis routes. For the first time, a simple route for the biosynthesis of functionalized CuFe-hybrid nanocomposites (FCFNCs) was achieved using Streptomyces cyaneofuscatus through a simultaneous bioreduction strategy of Cu and Fe salts. The suitability of FCFNCs was evaluated medically and environmentally as an anticancer agent, antimicrobial agent and dye bio-sorbent. The physicochemical characteristics of FCFNCs using XRD, EDX, elemental mapping, FTIR, UV-Vis., TEM and ζ-potential confirmed the formation of spheres agglomerated into chains (37 ± 2.2 nm), self-functionalized nanocomposite by proteinaceous moieties with considerable stability (- 26.2 mV). As an anticancer agent, FCFNCs displayed the highest apoptotic impact (> 77.7%) on Caco-2, HepG-2, MCF-7 and PC-3 cancer cells at IC50 ≤ 17.21 μg/mL with the maximum up regulation of p53 and caspase 3 expression and the lowest Ki-67 level, relative to both functionalized CuNPs (FCNPs) and FeNPs (FFNPs). Meanwhile, it maintained the viability of normal human cells by EC100 up to 1999.7 μg/mL. Regarding the antimicrobial activity, FCFNCs offered > 70% growth reduction among wide spectrum prokaryotic and eukaryotic pathogens. Additionally, the synergistic feature of FCFNCs disintegrated the pre-established biofilm and algal growth in a dose-dependent manner. However, as a bio-sorbent, FCFNCs decolorized > 68% of malachite green and congo red dyes (200 mg/L), reflecting considerable remediation efficiency, confirmed by FTIR of FCFNCs- adsorbed dyes and microtoxicity/cytotoxicity of solutions after remediation. This study offers new insights into promising CuFe-hybrid nanocomposites for recruitment in several applications.

Green synthesis of zinc oxide nanoparticles using leaf extracts of Raphanus sativus var. Longipinnatus and evaluation of their anticancer property in A549 cell lines

In 21 st century, nanomedicine has turned out to be an emergent modulus operation for the diagnosis and treatment for cancer. The current study includes the Green synthesis of zinc oxide nanoparticles (ZnO NPs) from the leaves of Raphanus sativus var. Longipinnatus and interpretation of its anticancer activity. Synthesized ZnO NPs were investigated by UV-vis, FTIR, particle size analysis, SEM, XRD and its anticancer activity using A549 cell lines. The UV-vis and particle size confirmed the developed ZnO NPs are in nanoscale. The FTIR studies confirmed the presence of various functional groups. SEM and XRD pictures confirmed the partial crystal spherical shape and wurtzite crystal nature. The cytotoxicity results pointed out the enhanced cytotoxic effect of the synthesized ZnO NPs. This is the first attempt of Raphanus sativus var. Longipinnatus facilitated synthesis of ZnO NPs as anticancer agents and may subsequently be potential chemopreventive agent against other cancer treatment in future.

Fenton-oxidation of rifampicin via a green synthesized rGO@nFe/Pd nanocomposite

Antibiotics are an emerging class of persistent contaminants that are now of major environmental concern because they pose potential risks to both environmental and human health. Here reduced graphene oxide composited with bimetallic iron/palladium nanoparticles (rGO@nFe/Pd) was synthesized via a green tea extract and used to remove a common antibiotic, rifampicin from aqueous solution. The innate physical rifampicin removal efficiency of the composite (79.9 %) was increased to 85.7 % when combined with Fenton-oxidation. The mechanism and the main factors controlling Fenton-oxidation of rifampicin by rGO@nFe/Pd were investigated. Oxidation followed a pseudo-second-order degradation kinetic model with an activation energy of 47.3 kJ mol^-1. rGO@nFe/Pd were characterized by Brunauer-Emmett-Teller (BET), fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray energy spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-Ray powder diffraction (XRD), and zeta potential. Rifampicin degradation products observed by LC-UV, where subsequently confirmed to be mainly 5,6,9-trihydroxynaphtho [2,1-b] furan-1(2 H)-one, 5,6-dihydroxy-1-oxo-1,2-dihydronaphtho [2,1-b] furan-2-yl formate and (S)-5,6,9-trihydroxy-2-(3-methoxypropoxy)-2-methylnaphtho [2,1-b] furan-1(2 H)-one by LC-MS. Finally, the practical effectiveness of the composite material for antibiotic removal was demonstrated by the treatment of representative wastewaters, where rifampicin removal efficiencies of 80.4, 77.9 and 70.2 % were observed for river, aquaculture wastewater and domestic wastewater, respectively.

Green-synthesized nanocatalysts and nanomaterials for water treatment: Current challenges and future perspectives

Numerous hazardous environmental pollutants in water bodies, both organic and inorganic, have become a critical global issue. As greener and bio-synthesized versions of nanoparticles exhibit significant promise for wastewater treatment, this review discusses trends and future prospects exploiting the sustainable applications of green-synthesized nanocatalysts and nanomaterials for the removal of contaminants and metal ions from aqueous solutions. Recent trends and challenges about these nanocatalysts and nanomaterials and their potential applications in wastewater treatment and water purification are highlighted including toxicity and biosafety issues. This review delineates the pros and cons and critical issues pertaining to the deployment of these nanomaterials endowed with their superior surface area, mechanical properties, significant chemical reactivity, and cost-effectiveness with low energy consumption, for removal of hazardous materials and contaminants from water; comprehensive coverage of these materials for industrial wastewater remediation, and their recovery is underscored by recent advancements in nanofabrication, encompassing intelligent and smart nanomaterials.

Various wastewaters treatment by sono-electrocoagulation process: A comprehensive review of operational parameters and future outlook

Electrochemical processes are a promising alternative to traditional water treatment systems because they have advantages than conventional techniques such as chemical storage, small treatment systems, no alkalinity depletion, remote adjustment, and cost-effectiveness. The most crucial electrochemical method is Electrocoagulation (EC). Through creating cationic species, the EC causes the neutralization of pollutant surface charges and destabilizes suspended, emulsified or dissolved contaminants led to attracting particles of opposite charge and form flocculants. The main drawback of the EC process is a passive film forming on the electrode surface over time. Ultrasonic (US) waves breaking down sediments formed at the electrode surface and generate high amounts of radical species to remove pollutants by creating high-pressure points inside the solution during the cavitation phenomenon. Although EC systems are considered as an exemplary renaissance in water and wastewater treatment, various parameters related to these types of systems in pollutant degradation have not been fully addressed. To present a comprehensive vision of the current state of the art, and progress the treatment efficiency and agitate new studies in these fields, this review aimed to provide an overview of electrocoagulation's application in pollutant degradation, besides the advantages, associated disadvantages and further strategies for improving the performance of this technique. Moreover, this review discussed various parameters affecting the EC/US process, including nanoparticles addition, electrolyte concentration, current intensity, electrode distance, temperature, oxidant addition, pH, pollutant concentration, reaction time, and electrode combination, chloride addition, and ultrasonic frequency. Also, the efficiency of the EC/US process for disinfection, as well as treatment of car-washing, textile, pulp, and paper industry, oily, brewery wastewater, surfactant, humic acid, and heavy metals, are addressed.

Growing Pd NPs on cellulose microspheres via in-situ reduction for catalytic decolorization of methylene blue

Dyeing industry highly contributes to environmental pollution and this needs to be addressed on priority. Pd NPs/CMs, a highly efficient and reusable catalyst for methylene blue (MB) decolorization, were fabricated by in-situ reduction method based on the cellulose microspheres (CMs). Pd NPs/CMs were characterized for the structure and catalytic performance by spectroscopic techniques such as SEM, EDS, XRD, IR, XPS, porosity, zeta potential, MS, and UV-visible spectroscopy, which all demonstrated that Pd NPs were distributed on the cellulose microspheres uniformly and exhibited excellent catalytic performances to decolorize a model organic dye MB in the presence of NaBH₄ with catalytic efficiency higher than 99.8%. More importantly, Pd NPs/CMs were proven to show excellent reusability for at least five cycles. Decolorization mechanism of MB, via the destruction of the chromophores (CN and S) of MB, was established with the help of MS combined with IR and XPS. Blank experiments using pure cellulose microspheres were carried out simultaneously to estimate the level of catalytic capacity achieved to Pd NPs/CMs. These materials proved themselves having great potential in large scale applications to treat dye-containing wastewater.

Palladium Nanoparticles Fabricated by Green Chemistry: Promising Chemotherapeutic, Antioxidant and Antimicrobial Agents

Palladium nanoparticles (Pd NPs) showed great potential in biomedical applications because of their unique physicochemical properties. Various conventional physical and chemical methods have been used for the synthesis of Pd NPs. However, these methods include the use of hazardous reagents and reaction conditions, which may be toxic to health and to the environment. Thus, eco-friendly, rapid, and economic approaches for the synthesis of Pd NPs have been developed. Bacteria, fungi, yeast, seaweeds, plants, and plant extracts were used to prepare Pd NPs. This review highlights the most recent studies for the biosynthesis of Pd NPs, factors controlling their synthesis, and their potential biomedical applications.

Zero-Valent Iron Nanoparticles for Soil and Groundwater Remediation

Zero-valent iron has been reported as a successful remediation agent for environmental issues, being extensively used in soil and groundwater remediation. The use of zero-valent nanoparticles have been arisen as a highly effective method due to the high specific surface area of zero-valent nanoparticles. Then, the development of nanosized materials in general, and the improvement of the properties of the nano-iron in particular, has facilitated their application in remediation technologies. As the result, highly efficient and versatile nanomaterials have been obtained. Among the possible nanoparticle systems, the reactivity and availability of zero-valent iron nanoparticles (NZVI) have achieved very interesting and promising results make them particularly attractive for the remediation of subsurface contaminants. In fact, a large number of laboratory and pilot studies have reported the high effectiveness of these NZVI-based technologies for the remediation of groundwater and contaminated soils. Although the results are often based on a limited contaminant target, there is a large gap between the amount of contaminants tested with NZVI at the laboratory level and those remediated at the pilot and field level. In this review, the main zero-valent iron nanoparticles and their remediation capacity are summarized, in addition to the pilot and land scale studies reported until date for each kind of nanomaterials.

Preparation and Characterization of Zinc Oxide Nanoparticles Using Leaf Extract of Sambucus ebulus

Plants are one of the best sources to obtain a variety of natural surfactants in the field of green synthesizing material. Sambucus ebulus, which has unique natural properties, has been considered a promising material in traditional Asian medicine. In this context, zinc oxide nanoparticles (ZnO NPs) were prepared using S. ebulus leaf extract, and their physicochemical properties were investigated. X-ray diffraction (XRD) results revealed that the prepared ZnO NPs are highly crystalline, having a wurtzite crystal structure. The average crystallite size of prepared NPs was around 17 nm. Green synthesized NPs showed excellent absorption in the UV region as well as strong yellow-orange emission at room temperature. Prepared nanoparticles exhibited good antibacterial activity against various organisms and a passable photocatalytic degradation of methylene blue dye pollutants. The obtained results demonstrated that the biosynthesized ZnO NPs reveal interesting characteristics for various potential applications in the future.

Porous composite architecture bestows Fe-based glassy alloy with high and ultra-durable degradation activity in decomposing azo dye

Since the treatment of wastewater containing azo dye presents problems worldwide, it is important to seek effective materials and technology for the purification of wastewater containing azo dye. Fe-based metallic glasses have been identified as promising materials for the decomposition of dyeing wastewater due to their high chemical activity resulting from their amorphous structure. It is imperative to further improve their degradation performance, and especially their durability, for potential application in wastewater purification. Here, composite structures constructed of porous Ni and amorphous Fe₇₈Si₉B₁₃ powder with markedly enhanced degradation performance in Orange II solution were obtained by utilizing a magnet. Due to the favorable effects of structural electrocatalysis and high dispersity of the distinctive porous architecture in addition to its self-cleaning properties, the solid-liquid interface exhibited strong, continuous electrical and mass transport, and a compelling improvement in degradation performance was achieved. Based on degradation tests and spectrum analysis, the kinetic rate was improved over 11-fold. Moreover, ultra-high durability over 100 cycles was revealed in cycling tests. The results indicate that wastewater degradation performance can be greatly enhanced by properly combining Fe-based metallic glasses with porous material.

Mechanism and impact of synthesis conditions on the one-step green synthesis of hybrid RGO@Fe/Pd nanoparticles

While a one-step green synthesis of a hybrid material composed of reduced graphene oxide and bimetallic Fe/Pd nanoparticles (RGO@Fe/Pd NPs) was previously successfully reported and evaluated for the removal of organic contaminants, the relationship between the formation of RGO@Fe/Pd and the resulting reactivity was unclear. In this paper the impact of the specific synthetic conditions on the reactivity of RGO@Fe/Pd was investigated in order to enhance the removal efficiency of antibiotics such as rifampicin. The hybrid material (RGO@Fe/Pd) successfully removed 96.1% of rifampicin compared to only 63.5 and 81.0% for Fe nanoparticles and RGO, respectively. The best synthetic conditions for the formation of RGO@Fe/Pd included GO/Fe = 1:1 and Fe/Pd = 100: 5. In addition, GC-MS and FTIR were used to identify the main reducing biomolecules in the green tea extract responsible for the one-step synthesis of RGO@Fe/Pd as Catechol, Caffeine, 1,3,5-Benzenetriol. The morphology, size and surface composition of RGO@Fe/Pd was characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-Ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These advanced characterization techniques suggested that during synthesis GO was initially converted to RGO, and thereafter Fe/Pd NPs (10-50 nm) were dispersed on RGO. Finally, a plausible formation mechanism for the one-step synthesis of the hybrid material was proposed.

Pd-based nanoparticles: Plant-assisted biosynthesis, characterization, mechanism, stability, catalytic and antimicrobial activities

Among various metal nanoparticles, palladium nanoparticles (Pd NPs) are one of the most important and fascinating nanomaterials. An important concern about the preparation of Pd NPs is the formation of toxic by-products, dangerous wastes and harmful pollutants. The best solution to exclude and/or minimize these toxic substances is plant mediated biosynthesis of Pd NPs. Biogenic Pd-based NPs from plant extracts have been identified as valuable nanocatalysts in various catalytic reactions because of their excellent activities and selectivity. They have captured the attention of researchers owing to their economical, sustainable, green and eco-friendly nature. This review attempts to cover the recent progresses in the fabrication, characterization and broad applications of biogenic Pd NPs in environmental and catalytic systems. In addition, the stability of biosynthesized Pd NPs and mechanism of their formation are investigated.

Phyto-Nanocatalysts: Green Synthesis, Characterization, and Applications

Catalysis represents the cornerstone of chemistry, since catalytic processes are ubiquitous in almost all chemical processes developed for obtaining consumer goods. Nanocatalysis represents nowadays an innovative approach to obtain better properties for the catalysts: stable activity, good selectivity, easy to recover, and the possibility to be reused. Over the last few years, for the obtaining of new catalysts, classical methods—based on potential hazardous reagents—have been replaced with new methods emerged by replacing those reagents with plant extracts obtained in different conditions. Due to being diversified in morphology and chemical composition, these materials have different properties and applications, representing a promising area of research. In this context, the present review focuses on the metallic nanocatalysts’ importance, different methods of synthesis with emphasis to the natural compounds used as support, characterization techniques, parameters involved in tailoring the composition, size and shape of nanoparticles and applications in catalysis. This review presents some examples of green nanocatalysts, grouped considering their nature (mono- and bi-metallic nanoparticles, metallic oxides, sulfides, chlorides, and other complex catalysts).

Aging effects on the stabilisation and reactivity of iron-based nanoparticles green synthesised using aqueous extracts of Eichhornia crassipes

Aging effects play a crucial role in determining applications of green-synthesised iron-based nanoparticles in wastewater treatment from laboratory scale to practical applications. In this study, iron-based nanoparticles (Ec-Fe-NPs) were synthesised using the extract of Eichhornia crassipes and ferric chloride. Scanning electron microscopy (SEM) revealed that the fresh Ec-Fe-NPs were spherical and had a narrow particle size range (50 to 80 nm). X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) demonstrated that the Ec-Fe-NPs were mainly amorphous in nature and consisted of Fe⁰, FeO, Fe₂O₃ and Fe₃O₄. As they aged, the particle size of the liquid Ec-Fe-NPs gradually increased and then tended to stabilise. Ec-Fe-NPs that were aged for 28 days were only 19% less efficient than fresh material at removing Cr(VI). Extracts aged up to 28 days were also tested, and their antioxidant capacity was found to be 15.4% lower than that of the fresh extracts. Furthermore, the removal efficiency of Cr(VI) using iron-based nanoparticles synthesised with the aged extracts was 67.2%. Finally, the active components of the extracts, which were responsible for the reactivity and stability of the iron-based nanoparticles, were identified by liquid chromatography-mass spectrometry. Overall, green-synthesised iron-based nanoparticles show promise for Cr(VI) removal from wastewater in practical applications.

Novel Green Biomimetic Approach for Synthesis of ZnO-Ag Nanocomposite; Antimicrobial Activity against Food-borne Pathogen, Biocompatibility and Solar Photocatalysis

A simple, eco-friendly, and biomimetic approach using Thymus vulgaris (T. vulgaris) leaf extract was developed for the formation of ZnO-Ag nanocomposites (NCs) without employing any stabilizer and a chemical surfactant. T. vulgaris leaf extract was used for the first time, in a novel approach, for green fabrication of ZnO-Ag NCs as a size based reducing agent via the hydrothermal method in a single step. Presence of phenols in T. vulgaris leaf extract has served as both reducing and capping agents that play a critical role in the production of ZnO-Ag NCs. The effect of silver nitrate concentration in the formation of ZnO-Ag NCs was studied. The in-vitro Antimicrobial activity of NCs displayed high antimicrobial potency on selective gram negative and positive foodborne pathogens. Antioxidant activity of ZnO-Ag NCs was evaluated via (2,2-diphenyl-1-picrylhydrazyl) DPPH method. Photocatalytic performance of ZnO-Ag NCs was appraised by degradation of phenol under natural sunlight, which exhibited efficient photocatalytic activity on phenol. Cytotoxicity of the NCs was evaluated using the haemolysis assay. Results of this study reveal that T. vulgaris leaf extract, containing phytochemicals, possess reducing property for ZnO-Ag NCs fabrication and the obtained ZnO-Ag NCs could be employed effectively for biological applications in food science. Therefore, the present study offers a promising way to achieve high-efficiency photocatalysis based on the hybrid structure of semiconductor/metal.

Simultaneous adsorption and degradation of triclosan by Ginkgo biloba L. stabilized Fe/Co bimetallic nanoparticles

Triclosan (TCS), an antimicrobial agent added in many pharmaceutical and personal care products, can cause some environmental problems due to its bioaccumulation, toxicity and potential antibiotic cross-resistance. In this study, Ginkgo biloba L. leaf extract was used as the green stabilizing agent to synthesize Fe/Co bimetallic nanoparticles (G-Fe/Co NPs), which were applied to remove TCS from aqueous solution. G-Fe/Co NPs were characterized by TEM, EDS, SEM, BET, FTIR, XRD and XPS. G. biloba L. leaf extract improved the dispersion and reduced the passivation of NPs. The TCS removal efficiency followed the order of G-Fe/Co NPs > G-Fe NPs > Co NPs > Fe/Co NPs > Fe NPs. G-Fe/Co NPs can be reused at least eight times. The Co leaching under different initial pH values was negligible. The factors affecting the TCS removal were investigated. The results indicated that the removal of TCS followed pseudo-second-order kinetics, and the removal rate constant decreased with increasing the initial pH value and the initial TCS concentration, and decreasing the Co loading of G-Fe/Co NPs and NPs dosage. The mass balance of TCS removal by G-Fe/Co NPs indicated that adsorption was dominant process and TCS degradation was an accumulative process.

Enhanced degradation of indeno(1,2,3-cd)pyrene using Candida tropicalis NN4 in presence of iron nanoparticles and produced biosurfactant: a statistical approach

Seven yeast isolates were screened for the remediation of indeno(1,2,3-cd)pyrene (InP) using biosynthesized iron nanoparticles and produced biosurfactant in growth medium. Four yeast isolates showed positive response to produce biosurfactant which was confirmed by drop collapse test, emulsification index, methylene blue agar plate method, oil displacement test and lipase activity. The yeast strain showing maximum potential for InP degradation and biosurfactant production was identified as Candida tropicalis NN4. The produced biosurfactant was characterized as sophorolipid type through TLC and FTIR analysis. Iron nanoparticles were biosynthesized using mint leaf extract and characterized by various instrumental analysis. Response surface methodology (RSM), three-level five-variable Box-Behnken design (BBD) was employed to optimize the factors, viz., pH (7), temperature (30 °C), salt concentration (1.5 g L^-1), incubation time (15 days) and iron nanoparticles concentration (0.02 g L^-1) for maximum InP degradation (90.68 ± 0.7%) using C. tropicalis NN4. It was well in close agreement with the predicted value which was obtained by RSM model (90.68 ± 0.4%) indicating the validity of the model. InP degradation was confirmed through FTIR and GC-MS analysis. A kinetic study demonstrated that InP degradation fitted first-order kinetic model. This is the first report on yeast-mediated nanobioremediation of InP and optimization of the whole process using RSM.

Green synthesis of reduced graphene oxide using bagasse and its application in dye removal: A waste-to-resource supply chain

Graphene is usually synthesized through deoxygenation of graphene oxide (GO) by hydrazine which functions as a reducing agent, but the production of graphene via this method suffers a high cost and is often regarded to be not environmental-friendly. In this work, we developed a simple and efficient method for the green reduction of GO to reduced graphene oxide (rGO) dispersed on sugarcane bagasse derived from rGO/bagasse material. The rGO/bagasse was characterized by Scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, Thermogravimetric analysis, X-ray photoelectron spectroscopy and X-ray diffraction analysis. All these characterization techniques clearly revealed that the rGO has been successfully prepared by reduction sugars. In addition, rGO synthesized from bagasse was considered as a promising adsorbent for removing methyl blue. Adsorption kinetics were also applied to stimulate the adsorption process, and the adsorption behavior of this new adsorbent fits well with the pseudo-second-order kinetic model (R² = 0.98). Finally, the cycling experiments for MB adsorption by bagasse synthesized rGO confirmed that the as-prepared rGO was reusable. Taken together, all results in this work provided the new insights into the green reduction of GO by bagasse, and the formation of rGO/bagasse material presented a great potential in the disposal of dye waste water.

Green synthesised iron and iron-based nanoparticle in environmental and biomedical application: - a review

Owing to the development of nanotechnology and its influence in various fields, the development of efficient and environmental friendly technique for the synthesis of nanomaterials is important. Among the various traditional and conventional methods available for the synthesis, plant-mediated synthesis seems to be a very attractive and environmental friendly method, attributing to its simple methodology and eco-friendly approach. The synthesis rate and stability of the nanoparticle synthesised are good when compared to the other methods of synthesis and it is proved to be efficient in various fields of application. Hence, the present review article deals with furnishing information about the plant sources used so far and details about the environmental and biomedical applications of the synthesised nanoparticles.

Fabrication of Fe3O4/MgAl-layered double hydroxide magnetic composites for the effective removal of Orange II from wastewater

A facile approach has been developed to construct a composite of magnetic Fe₃O₄ (MNPs) and regular hexagon Mg-Al layered double hydroxide (MNPs/MgAl-LDH) via a two-step hydrothermal method combined with the urea hydrolysis reaction for the removal of Orange II. The scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy results showed MNPs and MgAl-LDH have been combined successfully, providing the combination of the superior properties of fast separation and high adsorption capacity. The pH values, contact time, initial dye concentration and temperature were investigated in detail. The kinetics and isotherm study showed the adsorption of Orange II on MNPs/MgAl-LDH obeyed the pseudo-second-order and Langmuir model respectively and the adsorption processes were spontaneous and endothermic in nature. Also, some coexisting anions such as Cl^-, NO₃ ^-, CO₃ ^- and SO₄ ^2- had no significant effect on the removal of Orange II. The mechanism study revealed that the adsorption of Orange II on MNPs/MgAl-LDH mainly involves surface adsorption through electrostatic force and the layer anion exchange. Moreover, Orange II could be desorbed from MNPs/MgAl-LDH using 100 mg L^-1 NaOH and used for four cycles without any adsorption performance loss, demonstrating MNPs/MgAl-LDH prepared in this work could be used as a cost-effective and efficient material for the removal of Orange II.

Phytofabrication of Iron Nanoparticles for Hexavalent Chromium Remediation

Hexavalent chromium is a genotoxic and carcinogenic byproduct of a number of industrial processes, which is discharged into the environment in excessive and toxic concentrations worldwide. In this paper, the synthesis of green iron oxide nanoparticles using extracts of four novel plant species [Pittosporum undulatum, Melia azedarach, Schinus molle, and Syzygium paniculatum (var. australe)] using a "bottom-up approach" has been implemented for hexavalent chromium remediation. Nanoparticle characterizations show that different plant extracts lead to the formation of nanoparticles with different sizes, agglomeration tendencies, and shapes but similar amorphous nature and elemental makeup. Hexavalent chromium removal is linked with the particle size and monodispersity. Nanoparticles with sizes between 5 and 15 nm from M. azedarach and P. undulatum showed enhanced chromium removal capacities (84.1-96.2%, respectively) when compared to the agglomerated particles of S. molle and S. paniculatum with sizes between 30 and 100 nm (43.7-58.7%, respectively) in over 9 h. This study has shown that the reduction of iron salts with plant extracts is unlikely to generate vast quantities of stable zero valent iron nanoparticles but rather favor the formation of iron oxide nanoparticles. In addition, plant extracts with higher antioxidant concentrations may not produce nanoparticles with morphologies optimal for pollutant remediation.

Bacterial Exopolysaccharides as Reducing and/or Stabilizing Agents during Synthesis of Metal Nanoparticles with Biomedical Applications

Bacterial exopolysaccharides (EPSs) are biomolecules secreted in the extracellular space and have diverse biological functionalities, such as environmental protection, surface adherence, and cellular interactions. EPSs have been found to be biocompatible and eco-friendly, therefore making them suitable for applications in many areas of study and various industrial products. Recently, synthesis and stabilization of metal nanoparticles have been of interest because their usefulness for many biomedical applications, such as antimicrobials, anticancer drugs, antioxidants, drug delivery systems, chemical sensors, contrast agents, and as catalysts. In this context, bacterial EPSs have been explored as agents to aid in a greener production of a myriad of metal nanoparticles, since they have the ability to reduce metal ions to form nanoparticles and stabilize them acting as capping agents. In addition, by incorporating EPS to the metal nanoparticles, the EPS confers them biocompatibility. Thus, the present review describes the main bacterial EPS utilized in the synthesis and stabilization of metal nanoparticles, the mechanisms involved in this process, and the different applications of these nanoparticles, emphasizing in their biomedical applications.