A solar light driven dual photoelectrode photocatalytic fuel cell (PFC) for simultaneous wastewater treatment and electricity generation

Integrating detection and degradation of bisphenol A by photocatalytic fuel cell-driven photoelectrochemical sensor

To ensure food safety and environmental protection, it is crucial to rapidly identify and remove bisphenol A (BPA), a plasticizer commonly used in the inner lining of food containers and beverage packaging. Here, a photocatalytic fuel cell (PFC)-integrated self-powered photoelectrochemical (PEC) sensor is constructed. Unlike conventional single PEC or PFC sensors, this PFC-integrated PEC sensor relies on not only the difference in Fermi energy levels between photoanode and photocathode but also charge accumulation resulted from the oxidation of BPA by photogenerated holes. Consequently, this sensor achieved a remarkable maximum output power (Pmax) of 8.58 μW cm-2, as well as a high sensitivity, wide linear detection range (0.1-200 μM), low detection limit (0.05 μM), great stability, reproducibility, and real sample detection capability. This work integrates PFC and PEC technologies successfully for the rapid identification and efficient removal of BPA.

One-Step Self-Assembled WO3/rGO Microspheres Photoanode Assembled Efficient Photocatalytic Fuel Cells for Simultaneous Organic Pollutant Degradation and Electricity Generation

Photocatalytic fuel cells (PFCs) present a promising and environmentally friendly approach to simultaneously treat organic pollutants in wastewater and electricity generation. The development of photoanodes with high light absorption and carrier mobility is essential for enhancing the performance of PFCs but remains challenging. Herein, a one-step self-assembly strategy was adopted to develop flower-like WO3/rGO microspheres for PFC devices. Attributed to the abundant surface-active sites, enhanced light harvesting, and efficient separation of photogenerated charge carriers, the WO3/rGO photoanode demonstrated superior rhodamine B (RhB) degradation rate (90% in 2 h), maximum power density (4.74 μW/cm2), and maximum photocurrent density (0.096 mA/cm2), 1.4, 2.4, and 4.0 times higher than the corresponding pure WO3 photoanode, respectively. Density functional theory (DFT) calculations reveal that the built-in electric field formed between the interface of WO3 and rGO promotes the transfer of photogenerated electrons from WO3 to rGO, thus exerting a significant impact on improving the migration and separation of photoinduced charge carriers. Moreover, by combining experimental and theoretical results, a complete PFC operation mechanism for the PFC system was proposed. This study focuses on the strategy of constructing rGO-doped photocatalysts to enhance the interfacial charge transfer mechanism, providing a promising approach for the development of high-performance photoanodes in PFC systems.

Photo-assisted microbial fuel cell systems: critical review of scientific rationale and recent advances in system development

Bioelectrochemical systems such as microbial fuel cells (MFCs) have gained extensive attention due to their abilities to simultaneously treat wastewater and generate renewable energy resources. Recently, to boost the system performance, the photoelectrode has been incorporated into MFCs for effectively exploiting the synergistic interaction between light and microorganisms, and the resultant device is known as photo-assisted microbial fuel cells (photo-MFCs). Combined with the metabolic reaction of organic compounds by microorganisms, photo-MFCs are capable of simultaneously converting both chemical energy and light energy into electricity. This article aims to systematically review the recent advances in photo-MFCs, including the introduction of specific photosynthetic microorganisms used in photo-MFCs followed by the discussion of the fundamentals and configurations of photo-MFCs. Moreover, the materials used for photoelectrodes and their fabrication approaches are also explored. This review has shown that the innovative strategy of utilizing photoelectrodes in photo-MFCs is promising and further studies are warranted to strengthen the system stability under long-term operation for advancing practical application.

Recent progress in TiO2-biochar-based photocatalysts for water contaminants treatment: strategies to improve photocatalytic performance

Toxic organic pollutants in wastewater have seriously damaged human health and ecosystems. Photocatalytic degradation is a potential and efficient tactic for wastewater treatment. Among the entire carbon family, biochar has been developed for the adsorption of pollutants due to its large specific surface area, porous skeleton structure, and abundant surface functional groups. Hence, combining adsorption and photocatalytic decomposition, TiO2-biochar photocatalysts have received considerable attention and have been extensively studied. Owing to biochar's adsorption, more active sites and strong interactions between contaminants and photocatalysts can be achieved. The synergistic effect of biochar and TiO2 nanomaterials substantially improves the photocatalytic capacity for pollutant degradation. TiO2-biochar composites have numerous attractive properties and advantages, culminating in infinite applications. This review discusses the characteristics and preparation techniques of biochar, presents in situ and ex situ synthesis approaches of TiO2-biochar nanocomposites, explains the benefits of TiO2-biochar-based compounds for photocatalytic degradation, and emphasizes the strategies for enhancing the photocatalytic efficiency of TiO2-biochar-based photocatalysts. Finally, the main difficulties and future advancements of TiO2-biochar-based photocatalysis are highlighted. The review gives an exhaustive overview of recent progress in TiO2-biochar-based photocatalysts for organic contaminants removal and is expected to encourage the development of robust TiO2-biochar-based photocatalysts for sewage remediation and other environmentally friendly uses.

Sustainable degradation of pollutants, generation of electricity and hydrogen evolution via photocatalytic fuel cells: An Inclusive Review

Environmental pollution and energy crisis have recently become one of the major global concerns. Insincere discharge of massive amount of organic and inorganic wastes into the aqueous bodies causes serious impact on our environment. However, these organic substances are significant sources of carbon and energy that could be sustainably utilized rather than being discarded. Photocatalytic fuel cell (PFC) is a smart and novel energy conversion device that has the ability to achieve dual benefits: degrading the organic contaminants and simultaneously generating electricity, thereby helping in environmental remediation. This article presents a detailed study of the recent advancements in the development of PFC systems and focuses on the fundamental working principles of PFCs. The degradation of various common organic and inorganic contaminants including dyes and antibiotics with simultaneous power generation and hydrogen evolution has been outlined. The impact of various operational factors on the PFC activity has also been briefly discussed. Moreover, it provides an overview of the design guidelines of the different PFC systems that has been developed recently. It also includes a mention of the materials employed for the construction of the photo electrodes and highlights the major limitations and relevant research scopes that are anticipated to be of interest in the days to come. The review is intended to serve as a handy resource for researchers and budding scientists opting to work in this area of PFC devices.

Progress on simultaneous photocatalytic degradation of pollutants and production of clean energy: A review

In the current era of severe energy and environmental crises, the need for efficient and sustainable methods to control pollution and promote resource recycling has become increasingly important. Photocatalytic degradation of pollutants and simultaneous production of clean energy is one such approach that has garnered significant attention in recent years. The principle of photocatalysis involves the development of efficient photocatalysts and the efficient utilization of solar energy. The use of organic contaminants can enhance the photocatalytic reactions, leading to the sustainable generation of clean energy. Herein, we provide a comprehensive review of the latest advances in the application of photocatalytic synergized clean energy production in the environmental field. This review highlights the latest developments and achievements in this field, highlighting the potential for this approach to revolutionize the way we approach environmental pollution control and resource recycling. The review focuses on (1) the mechanism of photocatalytic degradation and synergistic energy production, (2) photocatalysts and synthesis strategies, (3) photocatalytic carbon dioxide reduction, (4) pollutant degradation, and (5) hydrogen and electricity production. In addition, perspectives on key challenges and opportunities in photocatalysis and clean energy for future developments are proposed. This review provides a roadmap for future research directions and innovations of photocatalysis that could contribute to the development of more sustainable and cleaner energy solutions.

Hydrodynamic performance assessment of photocatalytic reactor with baffles and roughness in the flow path: A modelling approach with experimental validation

Purification of wastewater is essential for human being as well as for the flora and fauna, and sustainable environment. Photocatalytic reactor with TiO2 coated layer can be used to degrade the pollutants but without proper pollutant mass transfer in the reactive surface, photocatalytic reactor decreases its effectiveness. The baffles and rough surface in the flow path can improve the fluid mixing to enhance pollutant mass transfer to improve the reactor's performance. In this study, a computational fluid dynamics (CFD) model has been developed to investigate the effect of four top baffles and three rough surfaces (semi-circular, triangle, and rectangle) on pressure drops, mass transfer and the hydrodynamic performance of the reactor. The experimental investigation was carried out using Formic Acid (FA) as pollutant in feed water for model validation. The simulated result varies only within 5% with the experimental data of FA concentration versus feed flow rate and fluid velocity. The model was run at fluid velocity of 0.15 m/s and 0.5 m/s (Reynolds number of 2150 (laminar flow) and 7500 (turbulent flow), respectively. The simulation result shows that the addition of baffles and roughness on the reactive surfaces increases the turbulent kinetic energy (minimum increase 8%) and consequently increases the mass transfer (maximum increase 37%) of the pollutant. The highest wall shear was observed to be 40 Pa when both square and triangular elements were used as roughness elements at turbulent flow condition. The results also shows that the highest pressure-drop of 8 kPa was found when the square roughness element was used at turbulent flow condition. Overall, the photocatalytic reactor performance is significantly enhanced by the application of combined baffles and roughness elements in the reactive surface.

Converting synthetic azo dye and real textile wastewater into clean energy by using synthesized CuO/C as photocathode in dual-photoelectrode photocatalytic fuel cell

Cathode in photocatalytic fuel cell (PFC) plays a crucial role in degradation of organic contaminants. In this study, synthesized copper oxide (CuO) was loaded on carbon plate and used as photocathode in PFC for degradation of synthetic azo dye Reactive Black 5 (RB5) and real textile wastewater. Morphology and structural phase of the synthesized CuO were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Several operating parameters had been investigated such as light irradiation, initial dye concentration, and pH of azo dye solution within 6 h of irradiation time. The lowest initial concentration of RB5 (10 mg L^-1) achieved 100% color removal compared to the highest initial concentration (40 mg L^-1) which only achieved 77.1% color removal within 6 h of irradiation time. The influence of external resistance was significant in electricity generation but trivial in dye degradation efficiency. The external resistance of 6000 Ω yielded highest maximum power density, with P_max of 0.2631 μW cm^-2, followed by 1000 Ω (0.2196 μW cm^-2) and 8000 Ω (0.1587 μW cm^-2), respectively. The real textile wastewater with dilution ratio (DR) 1:6 yielded the highest energy conversion efficiency, η (3.62%), followed by DR 1:4 (3.19%) and DR 1:2 (1.96%), respectively.

Efficient Bias-Free Degradation of Sulfamethazine by TiO2 Nanoneedle Arrays Photoanode and Co3O4 Photocathode System under LED-Light Irradiation

Solving high electrical-energy input for pollutants degradation is one of the core requirements for the practical application of photoelectrocatalytic (PEC) technology. Herein, we developed a self-driven dual-photoelectrode PEC system (TiO2 NNs-Co3O4) composed of a TiO2 nanoneedle arrays (TiO2 NNs) photoanode and Co3O4 photocathode for the first time. Under light-emitting-diode (LED) illumination, the bias-free TiO2 NNs-Co3O4 PEC system exhibited excellent PEC performance, with an internal bias as high as 0.19 V, achieving near complete degradation (99.62%) of sulfamethazine (SMT) with a pseudo-first-order rate constant of 0.042 min−1. The influences of solution pH, typical inorganic anions, natural organic matter, and initial SMT concentration on the PEC performance were investigated. Moreover, the main reactive oxygen species (h+, •OH, •O2−) in the dual-photoelectrode PEC system for SMT decomposition were elaborated. The practical application feasibility for efficient water purification of this unbiased PEC system was evaluated. It was proved that the TiO2 NNs photoanode provided a negative bias while the Co3O4 photocathode provided a positive bias for the photoanode, which made this system operate without external bias. This work elucidated the cooperative mechanism of photoelectrodes, providing guidance to develop a sustainable, efficient, and energy-saving PEC system for wastewater treatment.

Synergy of photocatalysis and fuel cells: A chronological review on efficient designs, potential materials and emerging applications

The rising demand of energy and lack of clean water are two major concerns of modern world. Renewable energy sources are the only way out in order to provide energy in a sustainable manner for the ever-increasing demands of the society. A renewable energy source which can also provide clean water will be of immense interest and that is where Photocatalytic Fuel Cells (PFCs) exactly fit in. PFCs hold the ability to produce electric power with simultaneous photocatalytic degradation of pollutants on exposure to light. Different strategies, including conventional Photoelectrochemical cell design, have been technically upgraded to exploit the advantage of PFCs and to widen their applicability. Parallel to the research on design, researchers have put an immense effort into developing materials/composites for electrodes and their unique properties. The efficient strategies and potential materials have opened up a new horizon of applications for PFCs. Recent research reports reveal this persistently broadening arena which includes hydrogen and hydrogen peroxide generation, carbon dioxide and heavy metal reduction and even sensor applications. The review reported here consolidates all the aspects of various design strategies, materials and applications of PFCs. The review provides an overall understanding of PFC systems, which possess the potential to be a marvellous renewable source of energy with a handful of simultaneous applications. The review is a read to the scientific community and early researchers interested in working on PFC systems.

Photocatalytic Fuel Cells for Simultaneous Wastewater Treatment and Power Generation: Mechanisms, Challenges, and Future Prospects

Technological advancement is accompanied by excessive consumption of fossil fuels and affluent uses of chemical substances in many sectors, including transportation and manufacturing companies, and so on. Being an exhaustible resource, the excessive use of fossil fuels and of chemical substances may lead to a serious energy crisis in the long run, and it may additionally impose environmental pollution. Attempts have been made in the solution of such serious issues from every nook and corner. Nonetheless, no method has been found to be a panacea in waste water treatment and subsequent beneficiaries. One of the attempts in the solution to such issues is the application of photocatalytic technology, which could serve as a dual function in environmental remediation and clean energy production. A photocatalytic fuel cell is a tool developed for the recovery of energy from organic wastes. A rational cell construction needs the fabrication of photoelectrodes, the design of a photoanode and a photocathode chamber, in addition to an ion-transport membrane for pollution treatment and electricity generation. In this review, comprehensive fundamental assessments and recent developments in the design of photocatalytic fuel cells, their applications, future prospects, and challenges are covered.

Highly Efficient Degradation of Persistent Pollutants with 3D Nanocone TiO2-Based Photoelectrocatalysis

Photoelectrocatalytic (PEC) degradation of organic pollutants into CO₂ and H₂O is a promising strategy for addressing ever-growing environmental problems. Titanium dioxide (TiO₂) has been widely studied because of its good performance and environmental benignancy; however, the PEC activity of TiO₂ catalyst is substantially limited due to its fast electron-hole recombination. Herein, we report a TiO₂ nanocone-based photoelectrocatalyst with superior degradation performance and outstanding durability. The unique conical catalyst can boost the PEC degradation of 4-chlorophenol (4-CP) with 99% degradation efficiency and higher than 55% mineralization efficiency at a concentration of 20 ppm. The normalized apparent rate constant of a nanocone catalyst is 5.05 h^-1 g^-1 m², which is 3 times that of a nanorod catalyst and 6 times that of an aggregated particle catalyst, respectively. Further characterizations reveal that the conical morphology of TiO₂ can make photogenerated charges separate and transfer more efficiently, resulting in outstanding PEC activity. Moreover, computational fluid dynamics simulations indicate that a three-dimensional conical structure is beneficial for mass transfer. This work highlights that tuning the morphology of a photoelectrocatalyst at the nanometer scale not only promotes the charge transfer but also facilitates the mass transportation, which jointly enhance the PEC performance in the degradation of persistent pollutants.

Complete solar-driven dual-photoelectrode fuel cell for water purification and power generation in the presence of peroxymonosulfate

This study reports the development of complete solar-driven dual-photoelectrode fuel cell (PFC) based on WO₃ photoanode and Cu₂O photocathode with peroxymonosulfate (PMS) serving as cathodic electron acceptor. As indicated by photoelectrochemical measurements, the PMS was able to improve thermodynamic properties of photocathode, achieving an increased open circuit potential from 0.42 V to 0.65 V vs standard hydrogen electrode (SHE). Under simulated sunlight irradiation (~100 mW cm^-2), the maximum power density of 0.12 mW cm^-2 could be obtained at current density of 0.34 mA cm^-2, which was 8.57 times of that produced by PFC without PMS (0.014 mW cm^-2). Correspondingly, adding PMS (1.0 mM) increased overall removal efficiency of 4-chlorophenol (4-CP) from 39.8% to 96.8%, accounting for the first-order kinetic constant (k=0.056 min^-1) being 6.67 times of that in the absence of PMS (k=0.0084 min^-1). Radical quenching and electron spin-resonance (ESR) results suggested the contribution of free radicals (•OH and SO₄^•-) and non-radical pathway associated with direct activation of PMS by Cu₂O photocathode. Fourier transformed infrared (FTIR) analysis confirmed the strong non-radical interaction between Cu₂O photocathode and PMS, resulting in 4-CP removal via activation of PMS by surface complex on Cu₂O. The proof-in-concept complete solar-driven dual-photoelectrode fuel cell may offer an effective manner to realize water purification and power generation, making wastewater treatment more economical and more sustainable.

Treatment of real wastewater by photoelectrochemical methods: An overview

An inadequate and inefficient performance ability of conventional methods to remove persistent organic pollutants urges the need of alternative or complementary advanced wastewater treatments methods to ensure the safer reuse of reclaimed water. Photoelectrochemical methods are emerging as promising options among other advanced oxidation processes because of the higher treatment efficiency achieved due to the synergistic effects of combined photochemical and electrolysis reactions. Synergistic effects of integrated photochemical, electrochemical and photoelectrochemical processes not only increase the hydroxyl radical production; an enhancement on the mineralization ability through various side reactions is also achieved. In this review, fundamental reaction mechanisms of different photoelectrochemical methods including photoelectrocatalysis, photo/solar electro-Fenton, photo anodic oxidation, photoelectroperoxone and photocatalytic fuel cell are discussed. Various integrated photochemical, electrochemical and photoelectrochemical processes and their synergistic effects are elaborated. Different reactor configurations along with the positioning of electrodes, photocatalysts and light source of the individual/combined photoelectrochemical treatment systems are discussed. Modified photoanode and cathode materials used in the photoelectrochemical reactors and their performance ability is presented. Photoelectrochemical treatment of real wastewater such as landfill leachate, oil mill, pharmaceutical, textile, and tannery wastewater are reviewed. Hydrogen production efficiency in the photoelectrochemical process is further elaborated. Cost and energy involved in these processes are briefed, but the applicability of photocatalytic fuel cells to reduce the electrical dependence is also summarised. Finally, the use of photoelectrochemical approaches as an alternative for treating soil washing effluents is currently discussed.

CoP imbedded g-C3N4 heterojunctions for highly efficient photo, electro and photoelectrochemical water splitting

Nanorod-like CoP nanoparticles were fabricated from different precursors of Co(OH)₂ and Co₃O₄ by gas-solid reaction, then further embedded into g-C₃N₄ nanosheets to form intimate heterojunctions via the (011) crystal planes of CoP nanoparticles. The heterojunction hybrid obtained from Co(OH)₂ exhibits superior activity in photo, electro and photoelectrochemical water splitting processes. In photocatalytic water half-splitting for hydrogen evolution reaction, the as-obtained 0.5% CoP-CN achieved a rate at 959.4 μmol·h^-1·g^-1 and 59.1 μmol·h^-1·g^-1 when irradiated by simulated sunlight and visible light respectively, almost 3.1 times and 15.8 times that of pristine g-C₃N₄, For photocatalytic water full-splitting, a stoichiometric evolution of H₂ (14.7 μmol·h^-1·g^-1) and O₂ (7.6 μmol·h^-1·g^-1) was observed on 3%Pt-0.5% CoP-CN composite. The onset potential for electrochemical HER process was drastically reduced after deposition with 0.5% CoP. Meanwhile, a higher photocurrent response and larger anodic photocurrent was detected over 0.5% CoP-CN photoanode during the photoelectrochemical water splitting process, relative to pristine g-C₃N₄ and its analogues. The comprehensive enhancements for catalytic activity of 0.5% CoP-CN could be attributed to its reduced over-potentials, more negative photo-reductive potentials, boosted interfacial charge transfer efficiency, as well as a much higher solar to hydrogen efficiency. The contrastive redox roles of CoP in both photocatalytic water half-splitting and full-splitting processes have been fully explored and revealed. This design on covalent organic framework of highly efficient CoP-based heterojunctions holds great promise for direct water splitting applications in utilizing solar energy.

Revealing the influences of functional groups in azo dyes on the degradation efficiency and power output in solar photocatalytic fuel cell

In this study, the degradation efficiency and electricity generation of the azo dyes affected by the functional groups and molecular structure in a solar photocatalytic fuel cell (PFC) system were investigated and discussed in detail. Four different azo dyes such as, Acid Orange 7 (AO7), Acid Red 18 (AR18), Reactive Black 5 (RB5), Reactive Red 120 (RR120) with different molecular structure were evaluated. The degradation efficiency of AO7, AR18, RB5 and RR120 achieved 5.6 ± 0.3%, 11.1 ± 0.6%, 41.9 ± 0.9% and 52.1 ± 1.3%, respectively, after 6 h irradiated under solar light. In addition, the maximum power density, P_max for AO7, AR18, RB5 and RR120 was 0.0269 ± 0.01, 0.111 ± 0.03, 1.665 ± 0.67 and 4.806 ± 1.79 mW cm^-2, respectively. Meanwhile, the concentration of COD for AO7, AR18, RB5 and RR120 reduced to 16 ± 0.1, 10 ± 0.3, 7 ± 0.6 and 3 ± 0.9 mg L^-1, respectively. The concentration ratio of benzene / naphthalene, benzene / azo bond and naphthalene / azo bond, respectively, was analyzed to investigate the impact of the functional groups over photodegradation of the azo dyes in PFC. Electron releasing groups (-OH and -NH₂) and electron withdrawing groups (-SO₃Na) which attached to the naphthalene or benzene ring also played a pivotal role in the degradation mechanism.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

Solar driven self-sustainable photoelectrochemical bacteria inactivation in scale-up reactor utilizing large-scale fabricable Ti/MoS2/MoOx photoanode

Here we present photoelectrochemical (PEC) bacterial inactivation properties of large-scale fabricable Ti/MoS₂/MoO_x photoanode with a strong solar light absorbance capacity. Specifically, by thermal oxidation of the as-prepared MoS₂/Ti film at 250 °C for 15 min in aerobic condition, the visible light performance of photocurrent generation and Escherichia coli (E. coli) inactivation are markedly enhanced. Complete inactivation of 10⁶ CFU/mL E. coli in NaCl electrolyte is achieved with 0.5 V bias in 2 h under visible light irradiation, and H₂O₂ and O₂^- have been found as key reactive oxidative species to destroy E. coli. The bacteria inactivation performance of present photoanode is comparable with reported visible light photoanodes such as Cu₂O or N-doped TiO₂. The markedly improved PEC performance and inhibited photocorrosion could be attributed to the formation of heterojunction of MoS₂/MoO_x on the surface due to thermal oxidation. Furthermore, the PEC E. coli inactivation performance and stability of the large dimensional electrode are evaluated in a scale-up reactor. As an example of self-sustainable PEC water treatment system powered by only solar panels, wastewater containing inorganic, organic, macromolecule and microbial pollutants is attempted to be treated employing the developed electrodes under illumination of LED lamps.

Use of Chalcogenide-Semiconductor-Sensitized Titania to Directly Charge a Vanadium Redox Battery

Unmediated charging of a battery using solar radiation is a very attractive project of solar energy conversion and storage. In the present work, solar energy was converted into electricity using a photocatalytic fuel cell operating with a chalcogenide-semiconductor-sensitized nanoparticulate titania photoanode and an air-cathode functioning by oxygen reduction. This cell produced sufficient energy to directly charge a vanadium redox battery functioning with a VOSO₄ electrolyte and carbon paper electrodes. The whole system is characterized by ease of construction and simplicity of conception; therefore, it satisfies conditions for practical applications.

Multi-functional photocatalytic fuel cell for simultaneous removal of organic pollutant and chromium (VI) accompanied with electricity production

It is of significant importance to realize the efficient wastewater treatment and energy recovery. This study presents a multi-functional photocatalytic fuel cell (PFC), which could reductively treat Cr(VI) contaminant and oxidatively degrade organic pollutant simultaneously along with electricity production in an economical strategy. TiO₂ nanotube arrays (TNA) and graphite were used as photoanode and cathode in two separated chambers, respectively. The optimized PFC with open circuit voltage of 1.06 V, maximum power density of 1 W m^-2 and short circuit current density of 3.7 A m^-2 can be obtained by increasing Cr(VI) concentration and decreasing pH values in catholyte. Under optimized PFC conditions, more photogenerated electrons will be transferred to cathode for Cr(VI) reduction, and accelerating electron-hole separation in the photoanode, then facilitating the oxidation of organic pollutants on anode. More than 96.8% removal efficiency for 6.8 mM Cr(VI) with a cathodic efficiency of 95.1% can be achieved within 6 h. Methylene blue (MB), an organic model pollutant, is totally decolorized on photoanode, which is significantly improved compare to photocatalysis (61.5% removal efficiency). The stable cycle operation of this economical PFC has obtained owing to the stable and low cost materials of both photoanode and cathode. This work may provide an efficient and economical method to simultaneously remove two types of pollutants with electricity harvested in one cell.

Core-shell nanowire arrays based on ZnO and CuxO for water stable photocatalysts

Staggered gap radial heterojunctions based on ZnO-Cu_xO core-shell nanowires are used as water stable photocatalysts to harvest solar energy for pollutants removal. ZnO nanowires with a wurtzite crystalline structure and a band gap of approximately 3.3 eV are obtained by thermal oxidation in air. These are covered with an amorphous Cu_xO layer having a band gap of 1.74 eV and subsequently form core-shell heterojunctions. The electrical characterization of the ZnO pristine and ZnO-Cu_xO core-shell nanowires emphasizes the charge transfer phenomena at the junction and at the interface between the nanowires and water based solutions. The methylene blue degradation mechanism is discussed taking into consideration the dissolution of ZnO in water based solutions for ZnO nanowires and ZnO-Cu_xO core-shell nanowires with different shell thicknesses. An optimum thickness of the Cu_xO layer is used to obtain water stable photocatalysts, where the ZnO-Cu_xO radial heterojunction enhances the separation and transport of the photogenerated charge carriers when irradiating with UV-light, leading to swift pollutant degradation.

Recent advances on photocatalytic fuel cell for environmental applications-The marriage of photocatalysis and fuel cells

Environmental pollution and energy crisis have become recent worldwide concerns. Huge amounts of organic wastes are discharged into water bodies, causing serious environmental pollution. Meanwhile, these organic compounds are important carbon and energy sources that could be utilized instead of being discarded. A smart design of a photocatalytic fuel cell (PFC) can achieve double benefits: it can degrade organic pollutants and at the same time generate energy. In this review article, we discuss recent progress in the development of PFC systems, and summarize the principles for constructing advanced PFC systems. We particularly focus on the rational design of electrode materials in terms of surface, morphology, facet, and interfacial reaction engineering. The impact of important operational parameters on PFC performance is further discussed in detail. We then discuss the major limitations and opportunities for future PFCs research. The development of smart and advanced PFC systems depends on highly interdisciplinary collaborations, which require concerted efforts from the communities of materials science, chemistry, engineering, and environmental science.

A synergistic heterostructured ZnO/BaTiO3 loaded carbon photoanode in photocatalytic fuel cell for degradation of Reactive Red 120 and electricity generation

Photocatalytic fuel cell (PFC) is considered as a sustainable green technology which could degrade organic pollutant and generate electricity simultaneously. A synergistic double-sided ZnO/BaTiO₃ loaded carbon plate heterojunction photoanode was fabricated in different ratios by using simple ultrasonication and mixed-annealed method. The double-sided design of photoanode allowed the lights irradiated at both sides of the photoanode. The ferroelectricity fabricated photoanode was applied in a membraneless PFC with platinum-loaded carbon as the cathode. Results revealed that the photoanode with 1:1 ratio of BaTiO₃ and ZnO exhibited a superior photocatalytic activity among all the photoanodes prepared in this study. The heterojunction of this photoanode was able to achieve up to a removal efficiency of 93.67% with a maximum power density of 0.5284 μW cm^-2 in 10 mg L^-1 of Reactive Red 120 (RR120) without any supporting electrolyte. This photoanode was able to maintain at high performance after recycling 3 times. Overloading of ZnO above 50% on BaTiO₃ could lead to deterioration of the performance of PFC due to the charge defects and light trapping ability. The interactions, interesting polarizations of the photocatalysts and proposed mechanism of the n-n type heterojunction in the photoanode of ZnO/BaTiO₃ was also discussed.

The effect and mechanism of organic pollutants oxidation and chemical energy conversion for neutral wastewater via strengthening reactive oxygen species

Toxic and refractory organic pollutants are continually discharged into the water environment, which has become the crisis for the human living and sustainable development. However, organic pollutants also contain large amounts of chemical energy. In this paper, we studied the effect and mechanism of organic pollutants oxidation and chemical energy conversion for neutral wastewater via strengthening reactive oxygen species (ROS) of HO and O₂^- in a photocatalytic fuel cell (PFC) system, since ROS has the power to oxidize or even mineralize the organics and is environment-friendly to treat refractory organic pollutants. In our PFC system, the HO was enhanced by the cyclic radical chain reaction via the addition of Fe²⁺ and tetrapolyphosphate (TPP), while O₂^- was enhanced by setting an additional bias voltage at the anode which was favorable to O₂ production. The results show that the HO and O₂^- concentration are highly enhanced, showing 8.28 and 8.99 times those of traditional PFC, respectively. Meanwhile, the degradation rate constant is remarkably increased by 6.52 times when methylene blue is used as a model pollutant. Furthermore, the performance of wastewater PFC is so improved that the short-circuit current density (J_sc) and maximum power density (JV_max) have been increased by a factor of 9.05 and 12.67 times in the same experiment, respectively.

Evaluation of photocatalytic fuel cell (PFC) for electricity production and simultaneous degradation of methyl green in synthetic and real greywater effluents

Recycling of alternative water sources particularly greywater and recovery of energy from wastewater are gaining momentum due to clean water scarcity and energy crisis. In this study, the photocatalytic fuel cell (PFC) employing ZnO/Zn photoanode and CuO/Cu photocathode was successfully designed for effective greywater recycling as well as energy recovery. The photoelectrodes were analyzed using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and fourier transform infrared (FTIR) spectroscopy. The PFC performance in terms of electricity generation and parallel methyl green (MG) degradation were evaluated under operating parameters such as electrolyte type, initial MG concentration and solution pH. The results showed that the addition of Na₂SO₄ electrolyte, MG concentration of 40 mg L^-1 and solution pH of 5.2 improved the short circuit current density (J_sc) and power density (P_max) in the as-constructed PFC. Such a system also afforded highest MG and chemical oxygen demand (COD) removal efficiencies after 4 h of irradiation. The photoanodes used in this study demonstrated great recyclability after four repetition tests. The COD removal was reduced to some extents when the PFC treatment was tested in the real greywater under optimal conditions. Various greywater quality parameters including ammoniacal nitrogen (NH₃-N), turbidity, pH and biochemical oxygen demand (BOD₅) were also monitored. The phytotoxicity experiments via Vigna radiate seeds indicated a reduction in the phytotoxicity.

Enhancement of simultaneous batik wastewater treatment and electricity generation in photocatalytic fuel cell

The objective of this study was to investigate several operating parameters, such as open circuit, different external resistance, pH, supporting electrolyte, and presence of aeration that might enhance the degradation rate as well as electricity generation of batik wastewater in solar photocatalytic fuel cell (PFC). The optimum degradation of batik wastewater was at pH 9 with external resistor 250 Ω. It was observed that open circuit of PFC showed only 17.2 ± 7.5% of removal efficiency, meanwhile the degradation rate of batik wastewater was enhanced to 31.9 ± 15.0% for closed circuit with external resistor 250 Ω. The decolorization of batik wastewater in the absence of photocatalyst due to the absorption of light irradiation by dye molecules and this process was known as photolysis. The degradation of batik wastewater increased as the external resistor value decreased. In addition, the degradation rate of batik wastewater also increased at pH 9 which was 74.4 ± 34.9% and at pH 3, its degradation rate was reduced to 19.4 ± 8.7%. The presence of aeration and sodium chloride as supporting electrolyte in batik wastewater also affected its degradation and electricity generation. The maximum absorbance of wavelength (λ_max) of batik wastewater at 535 nm and chemical oxygen demand gradually decreased as increased in irradiation time; however, batik wastewater required prolonged irradiation time to fully degrade and mineralize in PFC system.

A solar responsive photocatalytic fuel cell with the membrane electrode assembly design for simultaneous wastewater treatment and electricity generation

In this work, a photocatalytic fuel cell (PFC) with membrane electrode assembly (MEA) structure was designed for simultaneous organic compounds degradation and electricity generation. For the photoanode, the TiO₂ with the quantum-dot sensitization by CdS-ZnS was used to broaden the absorption spectrum to visible light. For the cathode, an air-breathing mode was utilized to enhance the oxygen transport. The performance of the developed PFC was evaluated under different operation conditions, including the light intensity, liquid flow rate, concentrations of electrolyte and organics. Results indicated that the designed PFC could yield good performance. The increase of the light intensity and electrolyte concentration could improve the PFC performance. It is also found that when the flow rate was increased, the PFC performance dropped down in the testing range. Too high organics concentration led to the decrease of the PFC performance.

A novel visible-light responsive photocatalytic fuel cell with a heterostructured BiVO4/WO3 photoanode and a Pt/C air-breathing cathode

A series of heterostructured BiVO₄/WO₃ photoanodes were successfully prepared via a two-step method of hydrothermal deposition and impregnation. The optimized BiVO₄/WO₃ sample showed the highest photocurrent density of ∼880 μA/cm² at 0.8 V (vs Ag/AgCl) in 0.1 M KH₂PO₄ aqueous solution (pH 7) under simulated AM1.5 illumination. The optimized BiVO₄/WO₃ photoanode was coupled with a Pt/C air-breathing cathode to build up a visible-light responsive PFC system. The as-prepared PFC system showed outstanding photoelectrocatalytic performances in converting organics into electricity, and when glucose was used as the 'fuel', the maximum power density (P_max) and the short-circuit current density (I_sc) were 8.58 μW/cm² and 91.8 μA/cm², respectively. Degradation experiments showed that the removal rate of tetracycline hydrochloride in PFC with BiVO₄/WO₃ photoanode and Pt/C air-breathing cathode was ∼87.2% in 8 h, which was much higher than photolysis and photocatalysis process. The mechanism responsible for the enhanced photoelectrocatalytic performance of the as-prepared PFC system was also discussed.