Preparation of montmorillonite modified biochar with various temperatures and their mechanism for Zn ion removal

Dependence of the formation kinetics of carbon dioxide hydrate on clay aging for solid carbon dioxide storage

Clay-based marine sediments have great potential for safe and effective carbon dioxide (CO2) encapsulation by storing enormous amounts of CO2 in solid gas hydrate form. However, the aging of clay with time changes the surface properties of clay and complicates the CO2 hydrate formation behaviors in sediments. Due to the long clay aging period, it is difficult to identify the role of clay aging in the formation of CO2 hydrate in marine sediments. Here, we used ultrasonication and plasma treatment to simulate the breakage and oxidation of clay nanoflakes in aging and investigated the influence of clay aging on CO2 hydrate formation kinetics. We found that the breakage and oxidation of clay nanoflakes would disrupt the siloxane rings and graft hydroxyl on the clay nanoflakes. This decreased the negative charge density of clay nanoflakes and weakened the interfacial interaction of clay nanoflakes with the surrounding water. Therefore, the small clay nanoflakes enriched in hydroxyl would disrupt the surrounding tetrahedral water structure analogous to the CO2 hydrate, resulting in the prolongation of CO2 hydrate nucleation. These results revealed the influence of the structure-function relationship of clay nanoflakes with CO2 hydrate formation and are favorable for the development of hydrate-based CO2 storage.

Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn2+ and Cu2

Removing heavy metals from aqueous solutions has drawn more and more attentions these years because of their serious global health challenge to human society. To develop an adsorbent with green, stable and high-efficiency for adsorption of heavy metals, pectin β-cyclodextrin composite was successfully prepared and used for Zn2+ and Cu2+ adsorption for the first time. Various variables that influence the adsorption performance were explored, and the optimal adsorption conditions were determined. According to the pseudo-second-order kinetic model, the adsorption process of Zn2+ and Cu2+ by the adsorbent was mainly chemical adsorption. The adsorbent adsorption process was an exothermic and non-spontaneous process. According to the Langmuir isotherm model, the maximum adsorption capacity was 12.51 ± 0.33 and 24.98 ± 0.23 mg/g for Zn2+ and Cu2+, respectively. The FTIR, EDX and XPS results revealed that the main mechanisms of removing pollutants by adsorbent were ion exchange and coordination. In addition, electrostatic attraction and chelation were present in the adsorption process. After five adsorption desorption cycles, the pectin β-cyclodextrin composite adsorbent still exhibited adsorption and regeneration capabilities. This study provides a low-cost, effective and simple method for preparation of modified pectin, which has excellent application potential in the removal of heavy metal ions from wastewater.

A novel and recyclable silica gel-modified biochar to remove cadmium from wastewater: Model application and mechanism exploration

Water pollution caused by heavy metals is a major environmental problem, threatening water production, food safety, and human health. Cadmium (Cd) pollution is particularly serious because of food-chain biomagnification at toxic concentrations. Modified biochar is promising for heavy metal removal; however, efficient adsorbents for Cd removal are lacking. In the present study, a novel adsorbent, silica gel-modified biochar (SGB), was prepared and applied to treat sewage polluted by Cd. Through the batch adsorption experiments, it is known that SGB possessed outstanding Cd removal ability and recycleability. Furthermore, the adsorption behavior and mechanisms were analyzed by the application of kinetic and isotherm models. The maximum Cd2+ adsorption capacity of SGB was 38.08 mg g-1, and after five recycling processes, the Cd2+ removal rate was still 86.89 %. When the pH of the solution was 7.0, SGB showed the strongest Cd2+ adsorption capacity (29.06 mg g-1). When competitive ions existed, biochar also had high Cd removal efficiency, although the effect of Pb2+ was greater than those of Cu2+ and Zn2+, indicating that SGB was applicable to complex polluted water. Additionally, the main Cd2+ adsorption mechanisms by SGB were electrostatic interactions, π-π interactions, complexation, and co-precipitation. These results showed that SGB can effectively treat Cd-contaminated wastewater as a new adsorbent.

A polyfunctionalized carbon framework composite for efficient decontamination of Cr(VI) and polycyclic aromatic nitrides from acidic wastewater

Developing multifunctional engineered adsorbents is an effective strategy for decontaminating the environment from various pollutants. In this study, a polyfunctionalized carbon-framework composite, MSC-CFM, was synthesized. The composite comprises an aromatic carbon framework enriched with various functional groups, including magnetic nanoparticles, hydroxyl, and amino groups. MSC-CFM was used to decontaminate Cr(VI) and polycyclic aromatic nitrides (p-dimethylaminoazobenzene sulfonate (DAS) and diphenyl-4, 4 '-di [sodium (azo-2 -) -1-amino-naphthalene-4-sulfonate] (DANS)) from acidic wastewater. The adsorption capacities of MSC-CFM for Cr(VI), DAS and DANS, quantified using the Langmuir isotherm model, were 161.28, 310.83, and 1566.09 mg/g, respectively. Cr(VI) and PAHs (DAS and DANS) were monolayer adsorbed controlled by chemisorption. MSC-CFM could maintain good adsorption efficiency after up to 6 adsorption and desorption cycles. The presence of polycyclic aromatic nitrides promoted the adsorption of Cr(VI) in the Cr(VI)-DAS/DANS binary systems. Removal of pollutants by MSC-CFM involved a variety of unreported reaction mechanisms, such as electrostatic attraction, redox reaction, anion exchange, intermolecular hydrogen bonding, complexation reaction, π-π interaction, and anion-π interaction. MSC-CFM, enriched with a variety of functional groups, is a promising new material for environmental protection. It has good potential for practical application in treating polluted wastewater.

Prediction of adsorption of metal cations by clay minerals using machine learning

Adsorption of heavy metals by clay minerals occurs widely at the solid-liquid interface in natural environments, and in this paper, the phenomenon of adsorption of Cd2+, Cu2+, Pb2+, Zn2+, Ni2+ and Co2+ by montmorillonite, kaolinite and illite was simulated using machine learning. We firstly used six machine learning models including Random Forest(R), Extremely Forest(E), Gradient Boosting Decision Tree(G), Extreme Gradient Boosting(X), Light Gradient Boosting(LGB) and Category Boosting(CAT) to feature engineer the metal cations and the parameters of the minerals, and based on the feature engineering results, we determined the first order hydrolysis constant(log K), solubility product constant(SPC), and higher hydrolysis constant (HHC) as the descriptors of the metal cations, and site density(SD) and cation exchange capacity(CEC) as the descriptors of the clay minerals. After comparing the predictive effects of different data cleaning methods (pH50 method, Box method and pH50-Box method) and six model combinations, it was finally concluded that the best simulation results could be achieved by using the pH 50-Box method for data cleaning and Extreme Gradient Boosting for modelling (RMSE = 4.158 %, R2 = 0.977). Finally, model interpretation was carried out using Shapley explanation plot (SHAP) and partial dependence plot(PDP) to analyse the potential connection between each input variable and the output results. This study combines machine learning with geochemical analysis of the mechanism of heavy metal adsorption by clay minerals, which provides a different research perspective from the traditional surface complexation model.

Insights into levofloxacin adsorption with machine learning models using nano-composite hydrochars

Hydrothermal carbonization was applied to taro peel wastes to produce hydrochars using a facile and environmentally friendly process. Four different entities were prepared: hydrochar (TPh), phosphoric-activated hydrochar (P-TPh), and silver@hydrochars (Ag@TPh, Ag@P-TPh). The elemental compositions of the single and composite hydrochars were confirmed by EDX. Among the produced hydrochars, the morphology of the Ag@hydrochar composites demonstrated more wrinkled structure, and Ag nanoparticles decorated the surface. The optimal experimental conditions for levofloxacin adsorption were determined to be a contact time of 45 min, hydrochar dose of 0.15 g L-1, and pH of 7. The best adsorption performances were assigned to Ag@hydrochars. Two machine learning models were applied to predict the levofloxacin adsorption efficiency of the Ag@hydrochars. A central composite design (CCD) and a 3-10-1 artificial neural network (ANN) model were developed to estimate the removal performance of levofloxacin using Levenberg-Marquardt backpropagation algorithm based on correlation and error analysis of the adopted training functions. Furthermore, the ANN sensitivity analysis revealed the order of the relative importance variable as initial concentration> hydrochar dose> pH. The predicted values of the CCD and ANN models fitted the experimental results with R2> 0.989. Therefore, the applied models were effective in predicting levofloxacin removal under different operating conditions. This work provides an open option for the sustainable management of food industry wastes and the possibility of waste valorization to effective hydrochar composites to be applied in water treatment processes.

Recent advances in clay minerals for groundwater pollution control and remediation

Clay minerals are abundant on Earth and have been crucial to the advancement of human civilization. The ability of clay minerals to absorb chemicals is frequently utilized to remove hazardous compounds from aquatic environments. Moreover, clay-based adsorbent products are both environmentally acceptable and affordable. This study provides an overview of advances in clay minerals in the field of groundwater remediation and related predictions. The existing literature was examined using data and information aggregation approaches. Keyword clustering analysis of the relevant literature revealed that clay minerals are associated with groundwater utilization and soil pollution remediation. Principal component analysis was used to assess the relationships among clay mineral modification methods, pollutant properties, and the Langmuir adsorption capacity (Qmax). The results demonstrated that pollutant properties affect the Qmax of pollutants adsorbed by clay minerals. Systematic cluster analysis was utilized to classify the collected data and investigate the relationships. The pollution adsorption mechanism of the unique structure of clay minerals was investigated based on the characterization results. Modified clay minerals exhibited changes in surface functional groups, internal structure, and pHpzc. This review provides a summary of recent clay-based materials and their applications in groundwater remediation, as well as discussions of their challenges and future prospects.

Two-stage hydrothermal oxygenation for efficient removal of Cr(VI) by starch-based polyporous carbon: Wastewater application and removal mechanism

Cr(VI) is of concern because of its high mobility and toxicity. In this work, a two-stage hydrothermal strategy was used to activate the O sites of starch, and by inserting K-ion into the pores, starch-based polyporous carbon (S-PC) adsorption sites was synthesized for removal of Cr(VI). Physicochemical characterization revealed that the O content of the S-PC reached 20.66 % after activation, indicating that S-PC has excellent potential for adsorption of Cr(VI). The S-PC removal rate for 100 mg/L Cr(VI) was 96.29 %, and the adsorption capacity was 883.86 mg/g. Moreover, S-PC showed excellent resistance to interference, and an equal concentration of hetero-ions reduced the activity by less than 5 %. After 8 cycles of factory wastewater treatment, the S-PC maintained 81.15 % of its original activity, which indicated the possibility of practical application. Characterization and model analyses showed that the removal of Cr(VI) from wastewater by the S-PC was due to CC, δ-OH, ν-OH, and C-O-C groups, and the synergistic effect of adsorption and reduction was the key to the performance. This study provides a good solution for treatment of Cr(VI) plant wastewater and provides a technical reference for the use of biological macromolecules such as starch in the treatment of heavy metals.

Effect of montmorillonite modified straw biochar on transfer behavior of lead and copper in the historical mining areas of dry-hot valleys

Due to the rapid development of human beings, heavy metals are occurred in the Yunnan-Guizhou Plateau and Panxi Plateau, the special dry and hot climate areas. Pb and Cu can be quickly transferred through water-plant-animal, further harm to human health by food chain. Therefore, the study of heavy metal treatment is imminent. In this study, Biochar-montmorillonite composites were prepared by co-pyrolysis and characterized, and their ability to remove lead and copper from water-soil process were tracked. And their effectiveness in remediating soil contaminated by lead and copper was documented. The composite material has the rich pore structure, large specific surface area (81.5 m2/g) and a variety of surface functional groups such as C-C, CO, ester-metal and metal-oxygen bonds. Pb and Cu can be effectively adsorbed and fixed to the level of no harm to human health. The adsorption reaction of lead and copper on the Biochar-montmorillonite composites is more suitable to be described by Langmuir adsorption and pseudo-second-order kinetics models. The saturation adsorption capacity of the composite for Pb was measured as 212.5 mg/g. For Cu, it was 136.5 mg/g. The data were fitted by a two-compartment first-order kinetic model. ffast for Pb and Cu is estimated to be 0.81 and 0.78, respective. Fast adsorption is dominant and belongs to typical chemical adsorption, which is consistent with the second-order kinetic results. With 5 % of the composite, approximately 80 % of exchangeable heavy metals in those soils collected from the Yunnan-Guizhou Plateau and Panxi Plateau were reduced. The biochar-montmorillonite composites made Pb and Cu change to stable residual state, up to 35 %. Besides, it effectively restored the activity of urease and sucrase in soils. Results indicated that biochar-montmorillonite composites can be effectively used as an environment-friendly adsorbent or passivator to purify heavy metals in soils.

Quantification of the effect of biochar application on heavy metals in paddy systems: Impact, mechanisms and future prospects

Biochar (BC) has shown great potential in remediating heavy metal(loid)s (HMs) contamination in paddy fields. Variation in feedstock sources, pyrolysis temperatures, modification methods, and application rates of BC can result in great changes in its effects on HM bioavailability and bioaccumulation in soil-rice systems and remediation mechanisms. Meanwhile, there is a lack of application guidelines for BC with specific properties and application rates when targeting rice fields contaminated with certain HMs. To elucidate this topic, this review focuses on i) the effects of feedstock type, pyrolysis temperature, and modification method on the properties of BC; ii) the changes in bioavailability and bioaccumulation of HMs in soil-rice systems applying BC with different feedstocks, pyrolysis temperatures, modification methods, and application rates; and iii) exploration of potential remediation mechanisms for applying BC to reduce the mobility and bioaccumulation of HMs in rice field systems. In general, the application of Fe/Mn modified organic waste (OW) derived BC for mid-temperature pyrolysis is still a well-optimized choice for the remediation of HM contamination in rice fields. From the viewpoint of remediation efficiency, the application rate of BC should be appropriately increased to immobilize Cd, Pb, and Cu in rice paddies, while the application rate of BC for immobilizing As should be <2.0 % (w/w). The mechanism of remediation of HM-contaminated rice fields by applying BC is mainly the direct adsorption of HMs by BC in soil pore water and the mediation of soil microenvironmental changes. In addition, the application of Fe/Mn modified BC induced the formation of iron plaque (IP) on the root surface of rice, which reduced the uptake of HM by the plant. Finally, this paper describes the prospects and challenges for the extension of various BCs for the remediation of HM contamination in paddy fields and makes some suggestions for future development.

Corn straw biochar addition elevated phosphorus availability in a coastal salt-affected soil under the conditions of different halophyte litter input and moisture contents

Improving salt-affected soil health using different strategies is of great significance for Sustainable Development Goals. The effects of biochar as a sustainable carbon negative soil amendment on phosphorous (P) pools in the degraded salt-affected soils of the of coastal wetlands (as one of the primary blue carbon ecosystems) with halophyte litter input under different water conditions (the two intrinsic characteristics of coastal wetlands) are poorly understood. Thus, a corn straw derived biochar (CBC) was added into a coastal salt-affected soil collected from the Yellow River Delta to investigate its effect on P fractions and availability under the input of three different local halophyte litters (i.e., Suaeda salsa, Imperata cylindrica and Phragmites australis) and under the unflooded and flooded water conditions. The results showed that the individual input of Suaeda salsa increased soil P availability by 28.2-40.9 %, but Imperata cylindrica and Phragmites australis had little effect on P availability. CBC individual amendment more efficiently enhanced P availability in the unflooded soil than the flooded soil. However, the co-amendment of CBC with litters showed little synergistic effect on P availability. CBC sharply increased the proportion of Ca-bound labile P fraction, but moderately lifted the proportion of Al/Fe-bound mediumly labile P fraction. CBC-enhanced P availability and altered inorganic P fractions were mainly resulted from the provision of labile inherent P by biochar, improved soil properties (i.e., increased CEC), and altered bacterial community composition (i.e., elevated abundance of P-solubilizing and phosphate-accumulating bacteria). These findings give new insights into understanding P biogeochemical cycling in the coastal salt-affected soils amended with biochars, and will be helpful to develop biochar-based technologies for enhancing P pools and improving soil health of the blue carbon ecosystems.

Insight into the impacts of pyrolysis time on adsorption behavior of Pb2+ and Cd2+ by Mg modified biochar: Performance and modification mechanism

Co-pyrolysis biomass and alkaline metals can effectively improve the adsorption performance of heavy metals (HM). Nevertheless, the researchers have ignored the relationship between the change of alkaline metal morphology and adsorption during pyrolysis. In this article, according to control the pyrolysis time (30, 60, and 180 min) synthesized Magnesium (Mg) modified biochar (MBCX) by using MgCl2·6H2O and soybean straw under 400 °C. The sorption capacities of MBC60 and MBC180 for Pb2+/Cd2+ increased by 38.65%/213.29%, 44.57%/230.36%, and the selectivity coefficient of Pb2+/Cd2+ increased by 113.28%/209.49%, 213.58%/253.62%, respectively, compared with MBC30. Additionally, the characterization results demonstrated that MgO dominated the surface phases of MBC60 and MBC180, whereas MgCl2 dominated the surface phases of MBC30. Moreover, according to the results of DFT calculation, the adsorption energy (Eads) of MgO for Pb2+ (-0.537 eV) and Cd2+ (-0.347 eV) was lower than that of MgCl2 (Pb2+: 0.37 eV, Cd2+: -0.185 eV), so that, MBC60 and MBC180 had higher sorption capacities for Pb2+ and Cd2+ than MBC30. Therefore, this work provides a new sight to clear the mechanism for modified biochar by alkali metal oxide and practical and theoretical guidance for adsorbent preparation with high adsorption ability for HMs.

Engineered hydrochar from waste reed straw for peroxymonosulfate activation to degrade quinclorac and improve solanaceae plants growth

Hydrochar from agricultural wastes is regarded as a prospective and low-cost material to activate peroxymonosulfate (PMS) for degrading pollutants. Herein, a novel in-situ N-doped hydrochar composite (RHCM4) was synthesized using montmorillonite and waste reed straw rich in nitrogen as pyrolysis catalyst and carbon source, respectively. The fabricated RHCM4 possessed excellent PMS activation performance for decomposing quinclorac (QC), a refractory herbicide, with a high removal efficiency of 100.0% and mineralization efficiency of 75.1%. The quenching experiments and electron spin resonance (ESR) detection disclosed free radicals (•OH, •SO4-, and •O2-) and non-radicals (1O2) took part in the QC degradation process. Additionally, the catalytic mechanisms were analyzed in depth with the aid of various characterizations. Moreover, the QC degradation intermediates and pathways were clarified by density functional theory calculations and HPLC-MS. Importantly, phytotoxicity experiments showed that RHCM4/PMS could efficaciously mitigate the injury of QC to Solanaceae crops (pepper, tomato, and tobacco). These findings give a new idea for enhancing the catalytic activity of hydrochar from agricultural wastes and broaden its application in the field of agricultural environment.

Enhancement of Cr(VI) adsorption on lignin-based carbon materials by a two-step hydrothermal strategy: Performance and mechanism

Cr(VI) is a carcinogenic heavy metal that forms an oxygen-containing anion, which is difficult to remove from water by adsorbents. Here, industrial alkali lignin was transformed into a Cr(VI) adsorbent (N-LC) by using a two-step hydrothermal strategy. The characterization results of the adsorbent showed that O and N were uniformly distributed on the surface of the adsorbent, resulting in a favorable morphology and structure. The Cr(VI) adsorption of N-LC was 13.50 times that of alkali lignin, and the maximum was 326.10 mg g-1, which confirmed the superiority of the two-step hydrothermal strategy. After 7 cycles, the adsorption of N-LC stabilized at approximately 62.18 %. In addition, in the presence of coexisting ions, N-LC showed a selective adsorption efficiency of 85.47 % for Cr(VI), which is sufficient to support its application to actual wastewaters. Model calculations and characterization showed that N and O groups were the main active factors in N-LC, and CO, -OH and pyridinic-N were the main active sites. This study provides a simple and efficient method for the treatment of heavy metals and the utilization of waste lignin, which is expected to be widely applied in the environmental, energy and chemical industries.

Synthesis of artificial humic acid-urea complex improves nitrogen utilization

The inefficient use of conventional nitrogen (N) fertilizers leads to N enrichment in the soil, resulting in N loss via runoff, volatilization and leaching. While using artificial humic acid to prepare novel N fertilizer is a good choice to improve its efficiency, the high heterogeneity of artificial humic acid limits its structural analysis and utilization efficiency. To solve above problems, this work mainly carried out the fractionation experiments, melt penetration experiments and soil incubation experiments. The results revealed that four fractions with different aromatization degree and molecular weights were obtained by the newly proposed continuous dissolution method, particular in the extraction solution of pH = 3-4, which were extracted with the highest aromatization degree. Furthermore, artificial humic acid urea complex fertilizers prepared at pH = 3-4 significantly improved the release of NH4+-N by 38.32% on days 7 and NO3--N by 10.30% on days 14, compared to urea application. The highly aromatic complex fertilizer with loading of urea-N was able to supply more inorganic N to the soil on days 3-14 (low molecular weight N) and to maintain a higher N content on days 70 (highly aromatized N). This can partially offset the mineralization of readily available organic N, buffering the immobilization of inorganic N from the soil when unstable organic compounds (e.g. conventional urea) were incorporated. A-HAU3-4 addition on days 70, Proteobacteria and Actinobacteriota were found to be the dominant phylum in the soil and the relative abundance of Endophytic bacteria was increased, which was conducive to the improvement of soil N utilization efficiency and soil N sequestration. Therefore, the preparation of artificial humic urea fertilizer with high aromatization degree or low molecular weight were an effective way to improve N utilization efficiency in the initial stages of soil incubation and maintain N fixation in the later stages of soil incubation. The future application of the strategy presented by this study would have an important ecological significance for alleviating agricultural N pollution.

Development of ZnO-GO-NiO membrane for removal of lead and cadmium heavy metal ions from wastewater

The presence of heavy metal (HM) ions, such as lead, cadmium, and chromium in industrial wastewater discharge are major contaminants that pose a risk to human health. These HMs should separate from the wastewater to ensure the reuse of the discharged water in the process and mitigate their environmental impacts. The distinctive mechanical properties of 2D graphene oxide (GO), and the antifouling characteristics of metal oxides (ZnO/NiO) nanoparticles combined to produce composites supporting special features for wastewater treatment. This study employed solution casting and phase inversion methods to synthesize PSF-based GO, ZnO-GO, and ZnO-GO-NiO mixed matrix membranes and the effects of variation in composition on the removal of lead (Pb2+) and cadmium (Cd2+) ion was examined. Several characterization techniques including X-ray diffraction analysis, scanning electron microscopy, energy dispersive X-ray, and Fourier transform infrared spectroscopy were applied to analyze the synthesized NPs and MMMs. The composite membranes were also analyzed in terms of their porosity, permeability, hydrophilicity, surface roughness, zeta potential, thermal stability, mechanical strength, and flux regeneration at various transmembrane pressures (2-3 kgcm-2), and pH value (5.5). The highest adsorption capacities were measured to be 308.16 mg g-1 and 354.80 mg g-1 for Pb (II) and Cd (II), respectively, for membrane (M4_A) having 0.3 wt% of ZnO-GO-NiO nanocomposite, at 200 mg L-1 of feed concentration and 1.60 mL min-1 of permeate flux. The Pb (II) and Cd (II) adsorption breakthrough curves were created, and the results of the experiment were compared with the data of the Thomas model.

Impregnation of biochar with montmorillonite and its activation for the removal of azithromycin from aqueous media

An inexpensive and environmentally friendly composite synthesized from rice husk, impregnated with montmorillonite and activated by carbon dioxide, was investigated for the removal of azithromycin from an aqueous solution. Various techniques were used to characterize adsorbents in detail. The sorption process was primarily regulated by the solution pH, pollutant concentration, contact duration, adsorbent dose, and solution temperature. The equilibrium data were best analyzed using the nonlinear Langmuir and Sips (R² > 0.97) isotherms, which revealed that adsorption occurs in a homogenous manner. The adsorption capacity of pristine biochar and carbon dioxide activated biochar-montmorillonite composite was 33.4 mg g^-1 and 44.73 mg g^-1, respectively. Kinetic studies identified that the experimental data obeyed the pseudo-second-order and Elovich models (R² > 0.98) indicating the chemisorption nature of adsorbents. The thermodynamic parameters determined the endothermic and spontaneous nature of the reaction. The ion exchange, π-π electron-donor-acceptor (EDA) interactions, hydrogen-bonding, and electrostatic interactions were the plausible mechanisms responsible for the adsorption process. This study revealed that a carbon dioxide activated biochar-montmorillonite composite may be used as an effective, sustainable, and economical adsorbent for the removal of azithromycin from polluted water.

Three-dimensional lignin-based polyporous carbon@polypyrrole for efficient removal of reactive blue 19: A synergistic effect of the N and O groups

Reactive blue 19 is one of the abundant carcinogens commonly used in industrial applications. This study transformed industrial lignin into a lignin-based polyporous carbon@polypyrrole (LPC@PPy) by a hydrothermal-activation-in situ polymerization strategy for removal of reactive blue 19. The hydrothermal reaction and polypyrrole polymerization provide abundant O and N groups, and the pore-making process promotes the even distribution of O and N groups in the 3D pore of LPC@PPy, which is favorable for the adsorption of reactive blue 19. The adsorption capacity of LPC@PPy for reactive blue 19 is 537.52 mg g-1, which is 2.04 times the performance of LPC (only hydrothermal and activation process, only have O groups) and 3.36 times that of LC (direct lignin activation, lack of O and N groups). After 8 cycles, LPC@PPy still maintained a high adsorption capacity of 92.14 % for reactive blue 19. In addition, this study found that N and O groups in the material played an important role in adsorption, mainly pyridinic-N, C-OH, -COOR, -C-O- and CC. This work provides a new strategy for the removal of reactive blue 19 and determines the groups that mainly interact with reactive blue 19, which provides a new reference for adsorption, catalysis and related fields.

Remediation of Cu, Cr(VI) and Pb polluted soil with industrial/agricultural by-products in seasonally frozen areas

Soils contaminated with potentially toxic elements (PTEs) may face serious environmental problems and pose health risks. In this study, the potential feasibility of industrial and agricultural by-products as low-cost green stabilization materials for copper (Cu), chromium (Cr(VI)) and lead (Pb) polluted soil was investigated. The new green compound material SS ∼ BM ∼ PRP was prepared by ball milling with steel slag (SS), bone meal (BM), and phosphate rock powder (PRP) which had an excellent stabilization effect on contaminated soil. Under 20% SS ∼ BM ∼ PRP addition into the soil, the toxicity characteristic leaching concentrations of Cu, Cr(VI) and Pb were reduced by 87.5%, 80.9% and 99.8%, respectively, and the phytoavailability and bioaccessibility of PTEs were reduced by more than 55% and 23%. The freezing-thawing cycle significantly increased the activity of heavy metals, and the particle size became smaller due to the fragmentation of the soil aggregates while SS ∼ BM ∼ PRP could form calcium silicate hydrate by hydrolysis to cement the soil particles, which inhibited the release of PTEs. Different characterizations indicated that the stabilization mechanisms mainly involved ion exchange, precipitation, adsorption and redox reaction. Overall, the results obtained suggest that the SS ∼ BM ∼ PRP is a green, efficient and durable material for remediation of various heavy metal polluted soils in cold regions and a potential method for co-processing and reusing industrial and agricultural wastes.

Performance and mechanism of starch-based porous carbon capture of Cr(VI) from water

Cr(VI) pollution has seriously affected the survival of biological organisms and humans, so reducing the harm of Cr(VI) pollution is a significant scientific goal. Natural starch exhibits a low adsorption capacity for Cr(VI); thus, physical or chemical modification is needed to improve the adsorption and regeneration performance of starch. In this study, a novel starch-based porous carbon (SPC) was prepared to remove Cr(VI) from water by using soluble starch as a raw material. The characterization results show that the SPC shows a ratio surface area of 1325.39 m²/g. Kinetics suggest that the adsorption of Cr(VI) on SPC is dominated by chemisorption. The isotherm data demonstrated that the adsorption of Cr(VI) by SPC adhered to the Freundlich model. SPC exhibits a multimolecular layer adsorption structure, and the highest amount of adsorbed Cr(VI) in SPC was 777.89 mg/g (25 °C). Ion competition experiments show that SPC exhibits significant selectivity for Cr(VI) adsorption. In addition, the adsorption cycle experiment shows that SPC maintains a 63 % removal rate after 7 cycles. In this study, starch was transformed into high-quality adsorbent materials by hydrothermal and activation strategies, offering a new innovation for the optimization of starch-based adsorbents.

Molecular Dynamics Simulation of Helium Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Montmorillonite

In order to investigate the type IV hydrogen storage bottle with better hydrogen storage capacity, the polymer lining of the hydrogen storage bottle was further developed. In this paper, the molecular dynamics method was used to simulate the helium adsorption and diffusion processes within a modified montmorillonite (OMMT)-filled polyamide 6 (PA6) system. The effects of the barrier properties of the composites were investigated at different filler contents (3%, 4%, 5%, 6% and 7%), different temperatures (288 K and 328 K) and different pressures (0.1 MPa, 41.6 MPa, 52 MPa and 60 MPa) for certain contents. It was found that when the filler content was 5%, the permeability coefficient of the material was lower than 2 × 10^-13 cm³∙cm/(cm²∙s∙Pa) and the barrier performance was the best. The modified filler with 5% OMMT/PA6 at 328 K still had the strongest barrier performance. When the pressure increased, the permeability coefficient of the modified material first decreased and then increased. In addition to this, the effect of the fractional free volume on the barrier properties of the materials was also investigated. This study provides a basis and reference for the selection and preparation of polymer linings for high-barrier hydrogen storage cylinders.

A new strategy for treating Pb2+ and Zn2+ pollution with industrial waste derivatives Humin

Metal pollution caused by industrial waste accumulation is a long-term and far-reaching problem. Humin (HM), as a highly condensed organic component insoluble in alkaline or water solution, is often discarded as humic acid industrial waste. However, the abundant active functional groups in HM reported by some researches make it possible for HM to remove metals. In this study, a waste reuse strategy was proposed to reduce the pressure of industrial metal pollution on the environment. HM was obtained from lignite waste residue. Scanning electron microscopy, energy spectrum and Fourier infrared spectroscopy, combined with the adsorption models were employed to reveal the mechanism of HM adsorption. The results showed that HM had multiple adsorption mechanism and high biological stability. The adsorption capacity of HM to Zn²⁺ and Pb²⁺ were 194.88 mg/g and 289.59 mg/g respectively. HM adsorbed Zn²⁺ mainly by physical multilayer adsorption. And the adsorption of Pb²⁺ by HM was mainly a monolayer chemical reaction, which depended on its active functional groups and the exchange of valence electrons. Notably, HM could simultaneously remove Pb²⁺ and Zn²⁺ and almost did not affect its original adsorption capacity to single ions. These results will provide a new strategy for the treatment of metal pollution in the future and alleviate the pressure of multiple metal pollution of the environment.

Performance and mechanisms for Cd(II) and As(III) simultaneous adsorption by goethite-loaded montmorillonite in aqueous solution and soil

A series of goethite-modified montmorillonite (GMt) materials was synthesized for the amelioration of cationic cadmium (Cd) and anionic arsenic (As) complex contaminants in soil and water bodies. The results showed that goethite (Gt) was successfully loaded onto the surface of montmorillonite (Mt), which possessed more functional groups (such as Fe-O, and Fe-OH) and a larger specific surface area. GMt-0.5 (Mt loaded with Gt at a ratio of 0.5:1) showed the highest adsorption capacity for Cd(II) and As(III) with the maximum of 50.61 mg/g and 57.58 mg/g, respectively. The removal rate of Cd(II) was highly pH dependent, while the removal rate of As(III) showed little dependence on pH. The goethite on montmorillonite might contribute to the formation of surface complexes with As(III) and oxidation of As(III) to As(V). In the binary system, both, synergistic and competitive adsorption existed simultaneously. Importantly, in the binary system, the removal of As(III) was more favorable because of the electrostatic interaction, formation of a ternary complex, and co-precipitation. In addition, the amendment of GMt-0.5 significantly reduced the availability of Cd and As in the soil. This study suggests that GMt-0.5 is a promising candidate for the simultaneous immobilization of metal (loid)s in both, aqueous solution and mine soil.

ROS generation and p-38 activation contribute to montmorillonite-induced corneal toxicity in vitro and in vivo

BACKGROUND

Montmorillonite (Mt) and its derivatives are now widely used in industrial and biomedical fields. Therefore, safety assessments of these materials are critical to protect human health after exposure; however, studies on the ocular toxicity of Mt are lacking. In particular, varying physicochemical characteristics of Mt may greatly alter their toxicological potential. To explore the effects of such characteristics on the eyes, five types of Mt were investigated in vitro and in vivo for the first time, and their underlying mechanisms studied.

RESULTS

The different types of Mt caused cytotoxicity in human HCEC-B4G12 corneal cells based on analyses of ATP content, lactate dehydrogenase (LDH) leakage, cell morphology, and the distribution of Mt in cells. Among the five Mt types, Na-Mt exhibited the highest cytotoxicity. Notably, Na-Mt and chitosan-modified acidic Na-Mt (C-H-Na-Mt) induced ocular toxicity in vivo, as demonstrated by increases corneal injury area and the number of apoptotic cells. Na-Mt and C-H-Na-Mt also induced reactive oxygen species (ROS) generation in vitro and in vivo, as indicated by 2',7'-dichlorofluorescin diacetate and dihydroethidium staining. In addition, Na-Mt activated the mitogen-activated protein kinase signaling pathway. The pretreatment of HCEC-B4G12 cells with N-acetylcysteine, an ROS scavenger, attenuated the Na-Mt-induced cytotoxicity and suppressed p38 activation, while inhibiting p38 activation with a p38-specific inhibitor decreased Na-Mt-induced cytotoxicity.

CONCLUSIONS

The results indicate that Mt induces corneal toxicity in vitro and in vivo. The physicochemical properties of Mt greatly affect its toxicological potential. Furthermore, ROS generation and p38 activation contribute at least in part to Na-Mt-induced toxicity.

Na4P2O7-Modified Biochar Derived from Sewage Sludge: Effective Cu(II)-Adsorption Removal from Aqueous Solution

With the rapid development of industrialization, the amount of copper-containing wastewater is increasing, thereby posing a threat to the aquatic ecological environment and human health. Sludge biochar has received extensive concern in recent years due to its advantages of low cost and sustainability for the treatment of heavy-metal-containing wastewater. However, the heavy-metal-adsorption capacity of sludge biochar is limited. This study prepared a sodium pyrophosphate- (Na4P2O7-) modified municipal sludge-based biochar (SP-SBC) and evaluated its adsorption performance for Cu(II). Results showed that SP-SBC had higher yield, ash content, pH, Na and P content, and surface roughness than original sewage sludge biochar (SBC). The Cu(II)-adsorption capacity of SP-SBC was 4.55 times than that of SBC at room temperature. For Cu(II) adsorption by SP-SBC, the kinetics and isotherms conformed to the pseudo-second-order model and the Langmuir–Freundlich model, respectively. The maximum adsorption capacity of SP-SBC was 38.49 mg·g−1 at 35°C. Cu(II) adsorption by SP-SBC primarily involved ion exchange, electrostatic attraction, and precipitation. The desired adsorption performance for Cu(II) in the fixed-bed column experiment indicated that SP-SBC can be reused and had good application potential to treat copper-containing wastewater. Overall, this study provided a desirable sorbent (SP-SBC) for Cu(II) removal, as well as a new simple chemical-modification method for SBC to enhance Cu(II)-adsorption capacity.

Insights into the interaction between cadmium/tetracycline and nano-TiO2 on a zeolite surface

Titanium dioxide (TiO₂) nanoparticles interact with organic-inorganic pollutants in the environment, and these interactions affect their environmental behavior. The mechanisms of the interaction between TiO₂ and organic-inorganic pollutants on the surface of clay minerals are still unclear. In this work, isotherm adsorption was studied to explore the interactions between Cd²⁺/tetracycline (TC), TiO₂ nanoparticles, and a zeolite (Zeo). SEM, FT-IR, and XPS were also used to reveal the interaction mechanism between organic-inorganic pollutants and TiO₂ on their stability and mobility in the environment. Compared to the single systems, the adsorption of Cd²⁺ and TiO₂ in the Cd + TiO₂ composite system decreased by 3.43% and 9.90%, respectively; the TC and TiO₂ adsorption in the TC + TiO₂ composite system decreased by 14.39% and 45.47%, respectively. The antagonism between Cd²⁺ and TiO₂ was due to Cd²⁺ and TiO₂ competing for the electrostatic attraction (-OH) and hydrogen bonding sites (Si-O), and TC and TiO₂ competing for the hydrogen bonding sites (-OH and C = O) on Zeo. The presence of TiO₂ will increase the mobility of Cd²⁺ and TC on a clay surface, and this effect is more significant for organic pollutants TC. Compared with Cd²⁺, TC has a more significant boosting impact on the TiO₂ mobility.

Environmental-friendly hydrochar-montmorillonite composite for efficient catalytic degradation of dicamba and alleviating its damage to crops

In recent years, carbon-based materials catalyzing peroxymonosulfate (PMS) for green degradation of persistent organic pollutants have attracted increasing attention. However, PMS activation by hydrochar composite (e.g. hydrochar-montomorillonite) has rarely been investigated. Herein, a simple preparation, low-cost and eco-friendly catalyst of hydrochar-montmorillonite composite (HC-Mt) was prepared to firstly catalyze PMS for the degradation of dicamba (DIC). The as-prepared HC-Mt showed a remarkably better catalyzing performance for PMS than pure hydrochar (HC) due to its good physicochemical characteristics and abundant oxygen-containing groups. Furthermore, the electron spin resonance (ESR) and quenching tests revealed that active species such as SO₄^-, OH and O₂^- all participated in the degradation process. DIC sites on C6, Cl 10, and O15 exhibited higher reactivity according to the density functional theory (DFT) calculation, which were easily attacked by active species. The DIC degradation mainly occurred via hydroxyl substitution, decarboxylation, oxidation and ring-cleavage and finally most of the intermediates were mineralized into CO₂ and H₂O. Finally, the phytotoxicity assessment was measured by the germination growth situation of tobacco and mung beans in the presence of DIC (with or without treatment by HC-Mt/PMS). The result showed that HC-Mt/PMS could significantly reduce the phytotoxicity of DIC to crops, suggesting that catalyzing PMS using HC-Mt was environmentally friendly. Therefore, this work did not only provide a novel catalyzing PMS strategy using hydrochar composite for wastewater treatment, but also give a new idea for herbicide phytotoxicity management.

Insights into the effects of tea pruning litter biochar on major micronutrients (Cu, Mn, and Zn) pathway from soil to tea plant: An environmental armour

A field study was conducted from 0 to 360 days to investigate the effect of tea pruning litter biochar (TPLBC) on the accumulation of major micronutrients (copper: Cu, manganese: Mn, and zinc: Zn) in soil, their uptake by tea plant (clone: S.3 A/3) and level of contamination in soil due to TPLBC. To evaluate the level of contamination due to TPLBC, a soil pollution assessment was carried out using the geo-accumulation index (I_geo), enrichment factor (EF), contamination factor (CF), potential ecological risk factor (PERF), individual contamination factor (ICF), and risk assessment code (RAC). The total content of Cu, Mn, and Zn gradually increased with increasing doses of TPLBC at 0D, and then decreased with time. The fractionation of the three micronutrients in soil changed after the application of TPLBC. The contamination risk assessment of soil for Cu, Mn, and Zn based on the I_geo, EF, CF, PERF,ICF, and RAC suggested that the application of TPLBC does not have any adverse effect on soil. Except for Mn, the bioconcentration and translocation factors were less than one for Cu and Zn. Results from this study revealed that the application of 400 kg TPLBC ha^-1 is significantly better than the other treatments for Cu, Mn, and Zn at a 5% level of significance.

Treatment technologies for olive mill wastewater with impacts on plants

Olive mill wastewater (OMW), produced during olive oil production, contains high levels of salt contents, organic matter, suspended particles, and toxic chemicals (particularly phenols), which all result in increased biological and chemical oxygen demand. Olive Oil Mills' Wastes (OMW), which have dark brown color with unpleasant smell, consist mainly of water, high organic (mainly phenols and polyphenols) and low inorganic compounds (e.g. potassium and phosphorus), as well as grease. OMW components can negatively affect soil's physical, chemical, and biological properties, rendering it phytotoxic. However, OMW can positively affect plants' development when it's applied to the soil after pretreatment and treatment processes due to its high mineral contents and organic matter. There are various approaches for removing impurities and the treatment of OMW including chemical, biological, thermal, physiochemical, and biophysical processes. Physical techniques involve filtration, dilution, and centrifugation. Thermal methods include combustion and pyrolysis; biological techniques use anaerobic and aerobic techniques, whereas adsorption and electrocoagulation act as physiochemical methods, and coagulation and flocculation as biophysical methods. In contrast, combined biological treatment methods use co-digestion and composting. A comparison of the effects of both treated and untreated OMW samples on plant development and soil parameters can help us to understand the potential role of OMW in increasing soil fertility. This review discusses the impacts of untreated OMW and treated OMW in terms of soil characteristics, seed germination, and plant growth. This review summarizes all alternative approaches and technologies for pretreatment, treatment, and recovery of valuable byproducts and reuse of OMW across the world.

Remediation of cadmium or arsenic contaminated water and soil by modified biochar: A review

Biochar has a high specific surface area with abundant pore structure and functional groups, which has been widely used in remediation of cadmium or arsenic contaminated water and soil. However, the bottleneck problem of low-efficiency of pristine biochar in remediation of contaminated environments always occurs. Nowadays, the modification of biochar is a feasible way to enhance the performance of biochar. Based on the Web of science™, the research progress of modified biochar and its application in remediation of cadmium or arsenic contaminated water and soil have been systematically summarized in this paper. The main modification strategies of biochar were summarized, and the variation of physicochemical properties of biochar before and after modification were illustrated. The efficiency and key mechanisms of modified biochar for remediation of cadmium or arsenic contaminated water and soil were expounded in detail. Finally, some constructive suggestions were given for the future direction and challenges of modified biochar research.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Structured clay minerals-based nanomaterials for sustainable photo/thermal carbon dioxide conversion to cleaner fuels: A critical review

In efforts to achieve a sustainable development goal, the utilization of CO₂ to generate renewable fuels is promising, as it is a sustainable technology that provides affordable and clean energy. To realize the production of renewable green fuels, a proficient and low-cost technology is required. Using photo/thermal catalytic process, the goal of sustainable CO₂ hydrogenation can be achieved. There have been several types of catalysts under exploration, however, they are expensive with limited availability. In the current development, green materials such as mineral clays are emerging as cocatalyst/supports for CO₂ hydrogenation. Clays are bestowed with various beneficial properties such as a large surface area, high porosity, abundant basic sites, excellent thermal stability and chemical corrosion resistance. Clays are promising materials that can drastically reduce the cost in catalyst preparation, partially fulfil the energy demand and reduce greenhouse gas emission. This review aims to focus on the various types of clays and their applications in the field of photo/thermal CO₂ hydrogenation to renewable fuels. Firstly, the classifications of clays are provided, whereby they can be differentiated based on their silicate layers, namely 1:1 and 2:1 type clay and their properties are thoroughly discussed to provide advantages and applications. The applications of various clays such as kaolinite, halloysite, montmorillonite, attapulgite, saponite and volkonskoite for CO₂ hydrogenation reactions are systematically discoursed. In addition, various approaches to improve the capability of raw clays as catalyst support are critically discussed, which include thermal treatment, exfoliation, acid-leaching and pillaring approaches. A critical discussion regarding the engineering aspects to further enhance clay-based catalyst for CO₂ hydrogenation are further disclosed. In short, clays are freely available materials that can be found in abundance. However, there are many more different types of natural green clays that have not been studied and explored in various energy applications.

Mechanistic insight into adsorptive removal of ionic NOR and nonionic DEP organic contaminates by clay-biochar composites

The synthesis of clay-biochar composite has been recognized as an effective way to enhance the removal of pollutants. The interaction between clay mineral and biomass during thermal pyrolysis and the sorption capacity for ionic/nonionic organic containments have not been elaborated. In this study, two types of biochar were obtained from pyrolytic carbonization of the cellulosic-rich corn straw (C) and lignin-rich pine wood (P) at 500 or 700 °C. Typical clay minerals kaolinite and montmorillonite were selected to prepare clay-biochar composite. The results showed that the addition of clay mineral could strengthen dehydration reaction of corn straw biomass and reinforce its carbon structure. Montmorillonite-biochar composite owned more CC functional groups and porous structure than kaolinite-biochar composite. The addition of clay minerals could promote electrostatic attraction of ionic formed norfloxacin (NOR) on clay-pine wood biochar. However, the sorption capacity of nonionic diethyl phthalate (DEP) adsorption on clay-corn straw biochar decreased, owing to that clay increased the compactness of the biochar carbon structure, thus inhabited hydrophobic partition of nonionic organic compounds on disordered carbon fraction. The results from this study provide insights into the suitable contaminated site remediation by clay-biochar composite.

Carbon-based adsorbents as proficient tools for the removal of heavy metals from aqueous solution: A state of art-review emphasizing recent progress and prospects

Carbon-centric adsorbents (CCA) are diverse forms, from simple biochar (BC) to graphene derivatives, carbon nanotubes (CNTs), and activated carbon (AC), which have been vastly explored for their removal of a plethora of pollutants, including heavy metals (HM). The prominent features of CCA are their operational attributes like extensive surface area, the occurrence of flexible surface functional groups, etc. This work offers a comprehensive examination of contemporary research on CCA for their superior metal removal aptitude and performances in simulated solutions and wastewater flows; via portraying the recent research advances as an outlook on the appliances of CACs for heavy metal adsorption for removal via distinct forms like AC, BC, Graphene oxide (GO), and CNTs. The bibliometric analysis tool was employed to highlight the number of documents, country-wise contribution, and co-occurrence mapping based on the Scopus database. The coverage of research works in this review is limited to the last 5 years (2017-2021) to highlight recent progress and prospects in using CCAs such as AC, BC, GO, and CNTs to remove HM from aqueous media, which makes the review unique. Besides an overview of the common mechanisms of CACs, the future scope of CAC, especially towards HM mitigation, is also discussed in this review. This review endorses that further efforts should be commenced to enhance the repertory of CCAs that effectively eliminate multiple targeted metals in both simulated and real wastewater.

Effects of composite environmental materials on the passivation and biochemical effectiveness of Pb and Cd in soil: Analyses at the ex-planta of the Pak-choi root and leave

Passivation of soil heavy metals using environmental materials is an important method or important in situ remediation measure. There are more studies on inorganic environmental materials for heavy metal passivation, but not enough studies on organic and their composite environmental materials with inorganic ones. In order to reveal the passivation effect of coal-based ammoniated humic acid (CAHA), biochemical humic acid (BHA), biochar (BC) and other organic types and inorganic environmental materials such as zeolites (ZL) on soil heavy metals and their biological effectiveness. The microstructures of these materials were analyzed by Scanning electron microscope (SEM). The main components of the environmental materials were analyzed by Energy dispersive spectrometer (EDS), Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction spectrum (XRD) to elucidate the mechanism of passivation of heavy metals in soil by these environmental materials. The study was conducted to investigate the effects of different types of environmental materials and their combinations on the passivation effect and biological effectiveness of Pb and Cd complex contamination in soil by means of soil incubation and pot experiments using single-factor and multifactor multilevel orthogonal experimental designs. Soil incubation experiments proved that the effective state of soil Pb and Cd in T₇ was reduced by 13.40% and 11.07%, respectively. The extreme difference analysis determined the optimized formulation of soil lead and cadmium passivation as BHA: CAHA: BC: ZL = 3.5:5:20:10. The pot experiment proved that the application of composite environmental materials led to the reduction of lead and cadmium content and increase of biomass of Pak-choi, and the optimal dosage of optimized composite environmental materials was 23.1 g/kg.

Efficient Cr(VI) removal from wastewater by D-(+)-xylose based adsorbent: Key roles of three-dimensional porous structures and oxygen groups

Reducing the harm of heavy metals to the environment has been a major scientific challenge. In this study, D-(+)-xylose was used to prepare an adsorbent with rich O groups and three-dimensional porous structures for Cr(VI) adsorption. What's more, the adsorption sites of many oxygen groups in the material were combined with the three-dimensionally connected porous structures, which made the adsorption sites fully in contact with Cr(VI). At the concentration of 300 mg/L, the removal rate of Cr(VI) was 94.50%, 6.4 times that of the non-porous treatment and 9.6 times that of the non-porous and O group treatment. The adsorbent showed a high adsorption capacity (910.10 mg/g) for Cr(VI), and the adsorption model proved that the adsorbent was a multi-molecular layer adsorbent. In addition, the adsorption was controlled by chemical reaction and diffusion, which was also attributed to the three-dimensional porous structure and abundant oxygen groups of the material. XPS and FTIR indicated that four O groups participated in the adsorption reaction (-OH, C-O-C, CO, and C-O), and C-O-C and C-O were the main reaction sites. After treating wastewater from electroplating plants with X-PC, the discharged water met international and domestic discharge standards (Cr(VI) removal rate> 99.90%). This work provides a new idea for the application of sugars in the environment and the design of porous adsorbents.

Remediation of heavy metal polluted waters using activated carbon from lignocellulosic biomass: An update of recent trends

The use of a cheap and effective adsorption approach based on biomass-activated carbon (AC) to remediate heavy metal contamination is clearly desirable for developing countries that are economically disadvantaged yet have abundant biomass. Therefore, this review provides an update of recent works utilizing biomass waste-AC to adsorb commonly-encountered adsorbates like Cr, Pb, Cu, Cd, Hg, and As. Various biomass wastes were employed in synthesizing AC via two-steps processing; oxygen-free carbonization followed by activation. In recent works related to the activation step, the microwave technique is growing in popularity compared to the more conventional physical/chemical activation method because the microwave technique can ensure a more uniform energy distribution in the solid adsorbent, resulting in enhanced surface area. Nonetheless, chemical activation is still generally preferred for its ease of operation, lower cost, and shorter preparation time. Several mechanisms related to heavy metal adsorption on biomass wastes-AC were also discussed in detail, such as (i) - physical adsorption/deposition of metals, (ii) - ion-exchange between protonated oxygen-containing functional groups (-OH, -COOH) and divalent metal cations (M²⁺), (iii) - electrostatic interaction between oppositely-charged ions, (iv) - surface complexation between functional groups (-OH, O^2-, -CO-NH-, and -COOH) and heavy metal ions/complexes, and (v) - precipitation/co-precipitation technique. Additionally, key parameters affecting the adsorption performance were scrutinized. In general, this review offers a comprehensive insight into the production of AC from lignocellulosic biomass and its application in treating heavy metals-polluted water, showing that biomass-originated AC could bring great benefits to the environment, economy, and sustainability.

Adsorption effect and the removal mechanism of silicate composite biochar particles on cadmium in soil

Ordinary biochar has the disadvantages of low strength and fragility, and it is difficult to be separated in heavy metal contaminated soil after the remediation process. In order to realize the recovery and reuse of biochar, we prepared silicate composite biochar (SCB) and the magnetic silicate composite biochar (MSCB) with consistent particle size and high hardness. As well as the passivation effect and mechanism of the material on cadmium in soil was also investigated. The results showed that: (1) The MSCB had good hydraulic properties and strong magnetism, which can be quickly separated from the soil under the condition of external magnetic field. (2) The MSCB can remove 30.32%-38.80% of cadmium in the soil after three times of "application-separation-desorption-reuse", as well as the SCB can remove 28.30%-35.78% of cadmium from the soil. (3) The recovered SCB and MSCB had a certain mass loss, the mass loss rate of the biochar particles was in the range of 2.65%-4.90% after each time of recycling. (4) MSCB mainly immobilized cadmium ions through pore interception, complexation of oxygen-containin/iron-containin functional group and precipitation reaction.

Designing of pretreatment filter technique for reduction of phenolic constituents from olive-mill wastewater and testing its impact on wheat germination

Olive oil extraction produces a great volume of olive mill wastewater (OMW), which is considered a serious ecological challenge. In this study, we have designed and tested a trickling filter consisting of seven different layers of natural material, including (coarse gravel, fine gravel, lime (Ca (OH)₂), sand (SiO₂), carbon char, sponge/mesh), to treat OMW. The filter process involved physical separation, filtration, coagulation and adsorption with the removal of COD (69.8%), BOD (40.2%), Phenolic contents (90%), pH (41%), EC (41.6%) and total suspended solids (TSS) (69%). Our results have shown that treated OMW has a high potential oxidant activity. T7, Untreated OMW at 1:6 dilutions, had the strongest correlation (i.e. 0.97), while untreated OMW had the lowest IC50 (7.62 g ml^-1), which shown the best DPPH radical scavenging capabilities. While pure Untreated OMW has the maximum radical scavenging activity, 63%, treated (1:6) diluted OMW exhibits the lowest value i. e 9% when phosphomolybdate assay was done. HPLC analysis showed that the trickling filter removed the vanillic acid, caffeic acid and reduced the contents of phenolic components such as gallic acid, hydroxytyrosol, vanillin, quercetin and catechol. Filtered OMW was also tested for its germination efficacy at various dilutions (1:0, 1:2, 1:4, 1:6). A remarkable improvement in germination percentage, germination index, seedling length, seedling vigor index, promptness index, stress tolerance index (76.7%, 68.4%, 51.7%, 82.1%, 54.8%, and 66.7%, respectively) has shown the efficiency of treated OMW at 1:6 dilutions. The results from this study show the efficiency of our filter design which can be further used.

Co-adsorption capabilities and mechanisms of bentonite enhanced sludge biochar for de-risking norfloxacin and Cu2+ contaminated water

Various bentonite-sludge biochar composites were fabricated by a sequence of loading and pyrolysis for the simultaneous removal of norfloxacin (NOR) and copper (Cu²⁺) from an aqueous solution. The morphology and characteristics of obtained composites were reflected through cation exchange capacity (CEC), BET specific surface area (S_BET), SEM, XRD, FTIR and XPS. The isothermal adsorption results showed that Sips adsorption model fitted better for the adsorption of NOR and Cu²⁺ during co-adsorption. The theoretical maximum adsorption capacity of BT:2 SB (the mass ratio of bentonite to sludge is 1:2) for NOR and Cu²⁺ was 89.36 mg g^-1 and 104.10 mg g^-1 at 25 °C in the co-adsorption system. The thermodynamic results showed the capture of NOR and Cu²⁺ was spontaneous, accompanied by an endothermic reaction with different randomness. In the co-adsorption system, the two were antagonistic to each other due to competition for the adsorption sites of hydroxyl, carboxylic acid and negatively charged provided by bentonite-sludge biochar. This study suggests that using natural mineral as a pyrolysis improver for sludge biochar can product the value-enhanced biochar for simultaneous removal of antibiotic and metal contaminants.

Evaluating the remediation potential of MgFe2O4-montmorillonite and its co-application with biochar on heavy metal-contaminated soils

In this work, a novel and efficient magnesium ferrite-modified montmorillonite (MgFe2O4-MMT) compound was prepared. MgFe2O4-MMT and biochar were mixed at 0:10, 1:9, 3:7, 4:6, and 10:0 w/w combinations and were used for heavy metal immobilization in soil polluted with multiple heavy metals. MgFe2O4-MMT can significantly increase soil alkalinity, and it exhibited the most optimal effect in immobilization of heavy metals in soil. The amounts of Cd, Pb, Cu, and Zn that were extracted by the toxicity characteristic leaching procedure (TCLP) decreased by 58.4%, 50.3%, 42.9%, and 24.7%, respectively. MgFe2O4-MMT can immobilize heavy metals through electrostatic interactions and cation exchange processes. Although, the immobilization of potentially toxic elements by MgFe2O4-MMT and biochar was inferior to that by MgFe2O4-MMT. The combined application of MgFe2O4-MMT and biochar dramatically increased the diversity and richness of the soil bacterial community. The Chao1 index for M3B7 treatment group was 1.7 and 1.2 times higher than that for the control and MgFe2O4-MMT treatment groups, respectively. The combination of biochar and MgFe2O4-MMT might be a cost-effective and ecological remediation approach for mild Pb and Cd contamination.

Assessing the efficiency and mechanism of zinc adsorption onto biochars from poultry litter and softwood feedstocks

The efficiency and adsorption mechanism of zinc removal was assessed in aqueous solution using four biochars from multiple biomass residues (poultry litter and three tree species). The effect of pH, kinetic effects, and isotherm fittings were investigated, as well as zinc-laden biochar using x-ray diffraction and absorption near edge structure. Sorbent load results showed softwood biochar exhibited the greatest zinc removal from both deionized (15 mg_Zn/L) and mining influenced river water (10 mg_Zn/L). The Langmuir isotherm was the best fit for the majority of the biochars. Exchangeable cations contributed most for the adsorption mechanism from the softwood biochars, while precipitation was greatest contribution for the poultry litter biochar. Overall, our results suggest that biochars from Douglas Fir trees are more efficient at removing zinc from aqueous solutions (up to 19.80 mg_Zn/g) compared to previously studied biochars (0.61 to 11.0 mg_Zn/g) and should be used for future remediation efforts.