Plastic waste associated with the COVID-19 pandemic: Crisis or opportunity?

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Plastic waste pollution is the serious environmental problem, and catalytic pyrolysis of waste plastics is an effective way to solve this problem. Carbon nanotubes (CNTs) are prepared by catalytic pyrolysis of low-density polyethylene (LDPE) waste plastics by one-stage method using iron nitrate and nickel nitrate as catalyst. The growth mechanism of CNTs is analyzed in detail. TPO, XRD, SEM and Raman analyses show that increasing Ni content contributes to the production of CNTs with good morphology and high graphitization degree. While the increasing Fe content contributes to improving the yield of CNTs. The outer and inner diameters of the FeNi12-CNTs-800 are about 21 nm and 8 nm with the length of 18.9 μm, respectively. LDPE pyrolysis gases are analyzed to determine that the primary carbon source required for CNTs growth is C2H4. The C2H4 adsorption and decomposition processes on FeNi alloys are performed to reveal the growth mechanism of CNTs, based on density functional theory calculation. Three kinds of the growth models are proposed to explain the difference of the CNTs tubular shape. FeNi12-CNTs-800 are used to remove microplastics from wastewater due to existence of magnetic. PVC can be quickly removed from wastewater with removal of 100 % at 20 min. This study provides an effective way for recycling and treatment of waste plastic.

A cradle-to-grave life cycle assessment of the endoscopic sinus surgery considering materials, energy, and waste

BACKGROUND

Operating rooms generate 1.8 million tons of waste annually, or 20%‒30% of the total healthcare waste in the United States. Our objective was to perform a life cycle assessment (LCA) for endoscopic sinus surgeries (ESSs) in order to analyze its environmental impact.

METHODS

A comprehensive LCA of ESS was performed considering energy, climate, and water use impacts associated with the materials and processes used. It focuses on the ESS performed at a large tertiary academic hospital and then extends the impacts to consider annual US surgeries. The assessment considers end-of-life waste management at both landfills and incinerators.

RESULTS

Single-use instrument production constitutes 89%‒96% of the total impacts throughout the life cycle of an ESS. Waste-to-energy incineration is shown to be a preferred end-of-life destination, as it recovers much of the input production energy of plastic items, ultimately reducing the input to 36%, although this is done at the expense of higher greenhouse gas emissions. For multi-use items, decontamination dominates environmental impact (>99% of totals), but consideration of reusable items reduces overall energy consumption and global warming potential (GWP) by 25%‒33%.

CONCLUSION

Single-use items dominate the total environmental impact of ESS. While multi-use items require additional decontamination over their lifetimes, results show that their incorporation reduces energy consumption and GWP by 25%‒33%, demonstrating the clear environmental benefit.

Degradation assessment of high-density polyethylene (HDPE) debris after long exposure to marine conditions

The degradation of high-density polyethylene (HDPE) in marine environments was investigated under various weathering conditions. HDPE debris were collected from coastal areas near Korinthos, Greece which had been exposed to marine conditions for durations ranging from a few months to several decades; they were analysed alongside with laboratory-manufactured HDPE specimens subjected to controlled weathering exposure. Four (4) different cases were investigated, including exposure to different conditions, namely to (a) natural atmospheric and (b) sea weathering conditions, (c) accelerated ultraviolet (UV) radiation, and finally (d) submersion to artificial seawater for up to twelve (12) months. The degradation assessment was proposed based on performed tensile mechanical tests, while the chemical/microstructural changes were assessed through Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM). FTIR spectroscopy indicated the emergence of carbonyl groups, with peaks appearing between 1740 cm-1 and 1645 cm-1, which are crucial indicators of photo-oxidative degradation. Key findings revealed that HDPE specimens experienced significant (8 %) ultimate tensile strength (σUTS) only after 3 months of atmospheric exposure, while this decrease can reach up to 60 % over the period of 35 years exposure. A strong correlation was observed between the σUTS decrease between the (a) natural environment and (b) accelerated UV weathering exposure. It is noticed that 1½ month of accelerated UV exposure corresponded to similar ultimate tensile strength decrease for 6 months of natural atmospheric degradation. A linear correlation is proposed to assess the long-term materials' tensile properties degradation in marine environments.

A new strategy for the preparation of polylactic acid composites with UV resistance, light conversion, and antibacterial properties

A novel rare earth complex, Eu(IAA)2(phen)2 (EuIP), was synthesized by solution-based synthesis method. Then, EuIP and polylactic acid (PLA) were melt-blended at 190 °C to obtain a multifunctional PLA/EuIP composite. The incorporation of EuIP provided PLA/EuIP composites with good light conversion ability. Under UV irradiation, PLA/EuIP composites converted the absorbed UV light into red light. Moreover, the PLA/1.0EuIP composite exhibited excellent light transmittance of 88 % in the visible region and showed strong red emission under UV light. After UV irradiation for 96 h, the molecular weights and mechanical properties of neat PLA decreased dramatically. Interestingly, the molecular weights and mechanical properties of PLA/EuIP composites did not deteriorate after 96 h of UV irradiation. The reason was that EuIP could absorb UV light and utilize the absorbed energy to emit red fluorescence. Furthermore, PLA/EuIP composites showed good antibacterial activities against E. coli and S. aureus. In addition, in vitro cell experiments showed that PLA/EuIP composites was suitable for the growth of murine breast cancer (4 T1) cells. Besides, enzymatic degradation testing also proved that PLA/EuIP composites had good biodegradability. This work provides an ingenious design strategy for the preparation of PLA/EuIP composites possessing light conversion ability, UV resistance, and antibacterial properties.

Angiotensin-Converting Enzyme-2 (ACE2) Downregulation During Coronavirus Infection

Angiotensin-converting enzyme-2 (ACE2) downregulation represents a detrimental factor in people with a baseline ACE2 deficiency associated with older age, hypertension, diabetes, and cardiovascular diseases. Human coronaviruses, including HCoV-NL63, SARS-CoV-1, and SARS CoV-2 infect target cells via binding of viral spike (S) glycoprotein to the ACE2, resulting in ACE2 downregulation through yet unidentified mechanisms. This downregulation disrupts the enzymatic activity of ACE2, essential in protecting against organ injury by cleaving and disposing of Angiotensin-II (Ang II), leading to the formation of Ang 1-7, thereby exacerbating the accumulation of Ang II. This accumulation activates the Angiotensin II type 1 receptor (AT1R) receptor, leading to leukocyte recruitment and increased proinflammatory cytokines, contributing to organ injury. The biological impacts and underlying mechanisms of ACE2 downregulation during SARS-CoV-2 infection have not been well defined. Therefore, there is an urgent need to establish a solid theoretical and experimental understanding of the mechanisms of ACE2 downregulation during SARS-CoV-2 entry and replication in the host cells. This review aims to discuss the physiological impact of ACE2 downregulation during coronavirus infection, the relationship between ACE2 decline and virus pathogenicity, and the possible mechanisms of ACE2 degradation, along with the therapeutic approaches.

Plastic particle impacts on the cardiovascular system and angiogenesis potential

The extensive application of plastics in different sectors such as packaging, building, textiles, consumer products, and several industries has increased in recent years. Emerging data have confirmed that plastic wastes and segregates are problematic issues in aquatic and terrestrial ecosystems. The decomposition of plastic particles (PPs) leads to the release of microplastics (MPs) and nanoplastics (NPs) into the surrounding environment and entry of these particles will be problematic in unicellular and multicellular creatures. It was suggested that PPs can easily cross all biological barriers and reach different organs, especially the cardiovascular system, with the potential to modulate several molecular pathways. It is postulated that the direct interaction of PPs with cellular and subcellular components induces genotoxicity and cytotoxicity within the cardiovascular system. Meanwhile, being inert carriers, PPs can intensify the toxicity of other contaminants inside the cardiovascular system. Here, in this review article, several underlying mechanisms related to PP toxicity in the cardiovascular system were discussed in detail.

Comments to "Degli-Innocenti, F. The pathology of hype, hyperbole and publication bias is creating an unwarranted concern towards biodegradable mulch films" [J. Hazard. Mater. 463 (2024) 132923]

Some narratives present biodegradable plastic use for soil mulching practices in agriculture as "environmentally friendly" and "sustainable" alternatives to conventional plastics. To verify these narratives, environmental research recently started focusing on their potential impact on soil health, highlighting some concerns. The paper by Degli-Innocenti criticizes this unfolding knowledge arguing that it is affected by communication hypes, alarmistic writing and a focus on exposure scenarios purposedly crafted to yield negative effects. The quest of scientists for increased impact - the paper concludes - is the driver of such behavior. As scholars devoted to the safeguarding of scientific integrity, we set to verify whether this serious claim is grounded in evidence. Through a bibliometric analysis (using number of paper reads, citations and mentions on social media to measure the impact of publications) we found that: i) the papers pointed out by Degli-Innocenti as examples of biased works do not score higher than the median of similar publications; ii) the methodology used to support the conclusion is non-scientific; and iii) the paper does not fulfil the requirements concerning disclosure of conflicts of interests. We conclude that this paper represents a non-scientific opinion, potentially biased by a conflict of interest. We ask the paper to be clearly tagged as such, after the necessary corrections on the ethic section have been made. That being said, the paper does offer some useful insights for the definition of exposure scenarios in risk assessment. We comment and elaborate on these proposed models, hoping that this can help to advance the field.

Modelling the mechanical properties of concrete produced with polycarbonate waste ash by machine learning

India's cement industry is the second largest in the world, generating 6.9% of the global cement output. Polycarbonate waste ash is a major problem in India and around the globe. Approximately 370,000 tons of scientific waste are generated annually from fitness care facilities in India. Polycarbonate waste helps reduce the environmental burden associated with disposal and decreases the need for new raw materials. The primary variable in this study is the quantity of polycarbonate waste ash (5, 10, 15, 20 and 25% of the weight of cement), partial replacement of cement, water-cement ratio and aggregates. The mechanical properties, such as compressive strength, split tensile strength and flexural test results, of the mixtures with the polycarbonate waste ash were superior at 7, 14 and 28 days compared to those of the control mix. The water absorption rate is less than that of standard concrete. Compared with those of conventional concrete, polycarbonate waste concrete mixtures undergo minimal weight loss under acid curing conditions. Polycarbonate waste is utilized in the construction industry to reduce pollution and improve the economy. This study further simulated the strength characteristics of concrete made with waste polycarbonate ash using least absolute shrinkage and selection operator regression and decision trees. Cement, polycarbonate waste, slump, water absorption, and the ratio of water to cement were the main components that were considered input variables. The suggested decision tree model was successful with unparalleled predictive accuracy across important metrics. Its outstanding predictive ability for split tensile strength (R2 = 0.879403), flexural strength (R2 = 0.91197), and compressive strength (R2 = 0.853683) confirmed that this method was the preferred choice for these strength predictions.

Occurrence of microplastics in edible tissues of livestock (cow and sheep)

Plastic contamination is widely recognized as a major environmental concern due to the entry of small plastic particles into the food chain, thereby posing potential hazards to human health. However, the current understanding of microplastic (MP; < 5 mm) particles in livestock, which serve as an important food source, is limited. This study aims to investigate the concentration and characteristics of MPs in edible tissues of cow and sheep, namely liver, meat, and tripe, obtained from butcher shops in five areas of Bushehr port, Iran. The mean concentration of MPs in different tissues of cow and sheep were 0.14 and 0.13 items/g, respectively. Among the examined tissues, cow meat exhibited the highest concentration of MPs, with a concentration of 0.19 items/g. Nylon and fiber were identified as the predominant polymer types and shapes of MPs found in cow and sheep tissues, respectively. Furthermore, no statistically significant difference was observed in MP concentration across different tissues of cow and sheep. Significantly, this study highlights the elevated hazards associated with exposure to MPs through the consumption of edible cow and sheep tissues, particularly for children who consume meat. The results underscore the potential transfer of MPs from the environment to livestock bodies through their food, contamination during meat processing, and subsequent health hazards for consumers.

Waste to energy: Trending key challenges and current technologies in waste plastic management

Due to the 'forever' degrading nature of plastic waste, plastic waste management is often complicated. The applications of plastic are ubiquitous and inevitable in many scenarios. Current global waste plastics production is ca. 3.5 MMT per year, and with the current trend, plastic waste production will reach 25,000 MMT by 2040. However, the rapid growth in plastic manufacture and the material's inherent nature resulted in the accumulation of a vast amount of plastic garbage. The current recycling rate is <10 %, while the large volumes of discarded plastic waste cause environmental and ecological problems. Recycling rates for plastic vary widely by region and type of plastic. In some developed countries, the recycling rate for plastics is around 20-30 %, while in many developing nations, it is much lower. These statistics highlight the magnitude of the plastic waste problem and the urgent need for comprehensive strategies to manage plastic waste more effectively and reduce its impact on the environment. This review critically analyses past studies on the essential and efficient techniques for turning plastic trash into treasure. Additionally, an attempt has been made to provide a comprehensive understanding of the plastic upcycling process, the 3Rs policy, and the life-cycle assessment (LCA) of plastic conversion. The review advocates pyrolysis as one of the most promising methods of turning plastic trash into valuable chemicals. In addition, plastic waste management can be severely impacted due to uncontrollable events, such as Covid 19 pandemic. Recycling and chemical upcycling can certainly bring value to the end-of-life plastic. However, the LCA analysis indicated there is still a huge scope for innovation in chemical upcycling area compared to mechanical recycling. The formulation of policies and heightened public participation could play a pivotal role in reducing the environmental repercussions of plastic waste and facilitating a shift towards a more sustainable future.

The Fate of Microplastics, Derived from Disposable Masks, in Natural Aquatic Environments

This paper mainly reviews the fate of microplastics, released from used face masks, in the water environment. Through previous experiments, the amount of fiber microplastics released from used face masks into aqueous environments was not negligible, with the maximum microplastics releasing amount reaching 10,000 piece·day-1 for each mask. Microplastic derived from these masks often occurred in the shape of polymeric fibers that resulted from the breakage of the chemical bonds in the plastic fibers by the force of water flow. The potential contact forces between microplastics (originating from face masks) with other pollutants, primarily encompass hydrophobic and electrostatic interactions. This critical review paper briefly illustrates the fate of microplastics derived from disposable face masks, further devising effective strategies to mitigate the environmental impact of plastic particle release from the used personal protective equipment.

A high-performance polymer composite column for coronavirus nucleic acid purification

Here, we report the development of a novel polymer composite (PC) purification column and kit. The performance of the PC columns was compared to conventional silica gel (SG) columns for the purification of nucleic acids from coronaviruses, including SARS-CoV-2, in 82 clinical samples. The results shows that PC-based purification outperforms silica gel (SG)-based purification by enabling a higher sensitivity (94%), accuracy (97%), and by eliminating false positives (100% specificity). The high specificity is critical for efficient patient triage and resource management during pandemics. Furthermore, PC-based purification exhibits three times higher analytical precision than a commonly used SG-based nucleic acid purification thereby enabling a more accurate quantification of viral loads and higher reproducibility.

Occurrence of phthalates in facemasks used in India and its implications for human exposure

Synthetic polymers with additives are used in the manufacturing of face masks (FMs); hence, FMs could be a potential source of exposure to phthalic acid esters (PAEs). India stands second in the world in terms of the FMs usage since the beginning of Covid-19 pandemic. However, little is known about the PAEs content of FMs used in India. Some PAEs, such as DEHP and DBP are suspected endocrine disrupting chemicals (EDCs); hence, wearing FM may increase the risk of exposure to these EDCs. In this study, we collected 91 samples of FMs from eight Indian cities and analyzed for five PAEs viz. DMP, DEP, DBP, BBP, and DEHP. The PAEs contents in FMs ranged from 101.79 to 27,948.64 ng/g. The carcinogenic risk of N 95 with filter, N-95, and cloth masks was higher than the threshold levels. The findings indicate the need to control PAEs in FMs through regulatory actions.

A simulation study on enhancing sterilization efficiency in medical plastics through gamma radiation optimization

Gamma radiation is progressively emerging as an effective method to enhance the sterilization efficiency of medical plastics including Polyvinyl chloride (PVC). The parameters of the radiation facility will affect the efficiency of radiation sterilization. To investigate these effects, we simulate the gamma radiation sterilization performance of PVC material sample using Monte Carlo Method. The simulation results indicated that compared with the sterilization time of 20-90 min from high-temperature steam sterilization of medical waste, by optimizing the parameters of the model radiation facility, the radiation sterilization time can be reduced to 6.61 min. The optimized model facility parameters are as follows: the gamma photon energy is 1.25 MeV, the model space is 300 × 300 × 300 cm3, the reflective layer material is concrete and its thickness is 8 cm, the PVC sample layer area is 100 × 100 cm2, the distance between the radiation source and the PVC sample layer is 150 cm, the energy deposition in the bottom layer of the PVC sample layer is 1.31315 × 10-6 MeV/g. This study offers a potentially feasible way for PVC sterilization, while also providing a crucial reference for the further promotion and application of radiation sterilization technology.

The Efficient Disposal of Biomedical Waste Is Critical to Public Health: Insights from the Central Pollution Control Board Guidelines in India

Biomedical waste (BMW), encompassing hazardous medical materials, poses environmental and public health risks if not correctly managed. The Central Pollution Control Board (CPCB) in India is a statutory organization that oversees BMW disposal standards, aimed at mitigating these hazards. BMW mismanagement is a major problem and potentially poses threats to the environment as well as public health. During the coronavirus disease 2019 (COVID-19) pandemic, increased use of personal protective equipment (PPE) and other medical equipment was witnessed which led to a marked raised BMW generation. To ensure proper and optimized BMW management, CPCB established guidelines and rules to be followed by the medical facilities as well as the common BMW treatment facilities (CBWTFs). The challenges in implementing proper waste management practices were lack of awareness and inadequate infrastructure. Strategies for better BMW management were proposed, including color-coded bins, improved infrastructure, advanced technology, and awareness campaigns. Highlighting CPCB's vital role, this emphasizes healthcare facilities' proactive role in implementing and evolving regulations for sustainable BMW disposal, ensuring both public health and environmental well-being through compliance and responsible waste management partnerships.

Material flow analysis-based assessment of polypropylene-fiber-containing microplastics released from disposable masks: Characterizing distribution in the environmental media

With the upsurge in the use of disposable masks during the coronavirus disease pandemic, improper disposal of discarded masks and their negative impact on the environment have emerged as major issues. Improperly disposed of masks release various pollutants, particularly microplastic (MP) fibers, which can harm both terrestrial and aquatic ecosystems by interfering with the nutrient cycling, plant growth, and the health and reproductive success of organisms. This study assesses the environmental distribution of polypropylene (PP)-containing MPs, generated from disposable masks, using material flow analysis (MFA). The system flowchart is designed based on the processing efficiency of various compartments in the MFA model. The highest amount of MPs (99.7 %) is found in the landfill and soil compartments. A scenario analysis reveals that waste incineration significantly reduces the amount of MP transferred to landfills. Therefore, considering cogeneration and gradually increasing the incineration treatment rate are crucial to manage the processing load of waste incineration plants and minimize the negative impact of MPs on the environment. The findings provide insights into the potential environmental exposure associated with the improper disposal of waste masks and indicate strategies for sustainable mask disposal and management.

A multi-jurisdictional study on the quantification of COVID-19 household plastic waste in six Latin American countries

This study examines urban plastic waste generation using a citizen science approach in six Latin American countries during a global pandemic. The objectives are to quantify generation rates of masks, gloves, face shields, and plastic bags in urban households using online survey and perform a systematic cross-jurisdiction comparisons in these Latin American countries. The per capita total mask generation rates ranged from 0.179 to 0.915 mask cap-1 day-1. A negative correlation between the use of gloves and masks is observed. Using the average values, the approximate proportion of masks, gloves, shields, and single-use plastic bags was 34:5:1:84. We found that most studies overestimated face mask disposal rate in Latin America due to the simplifying assumptions on the number of masks discarded per person, masking prevalence rate, and average mask weight. Unlike other studies, end-of-life PPE quantities were directly counted and reported by the survey participants. Both of the conventional weight-based estimates and the proposed participatory survey are recommended in quantifying COVID waste. Participant' perception based on the Likert scale is generally consistent with the waste amount generated. Waste policy and regulation appear to be important in daily waste generation rate. The results highlight the importance of using measured data in waste estimates.

Microplastics in Malaysia's Aquatic Environment: Current Overview and Future Perspectives

Microplastic pollution has adversely affected the aquatic ecosystem, living creatures, and human health. Several studies in Malaysia have provided baseline information on the existence of microplastics in surface water, ingestion by marine life and sediment. Also, humans are exposed to microplastic due to consumption of contaminated abiotic and biotic products, such as processed seafood. Nonetheless, knowledge is still scarce among Malaysian on the potential remediation and pollution management of microplastics, which poses a significant challenge to preserve a good environmental status. Green technologies also other alternative to mitigate the contamination of microplastics for sustainable future. Hence, this review aims to provide an overview of microplastic's occurrence, fate, and implications in Malaysia's aquatic environment. Detection of microplastics from the water surface, ingestion by aquatics, and sediment samples are highlighted. Available different treatment processes toward microplastic remediation are also discussed. Additionally, the potential challenges, current perspective for plastic management in Malaysia, as well as green strategies for reducing microplastic contamination are also put forward. The goal of this work is to improve the understanding of the seriousness of microplastic contamination in aquatic environments, thus encouraging key concerns that need to be investigated further.

Discovery and mechanism-guided engineering of BHET hydrolases for improved PET recycling and upcycling

Although considerable research achievements have been made to address the plastic crisis using enzymes, their applications are limited due to incomplete degradation and low efficiency. Herein, we report the identification and subsequent engineering of BHETases, which have the potential to improve the efficiency of PET recycling and upcycling. Two BHETases (ChryBHETase and BsEst) are identified from the environment via enzyme mining. Subsequently, mechanism-guided barrier engineering is employed to yield two robust and thermostable ΔBHETases with up to 3.5-fold enhanced kcat/KM than wild-type, followed by atomic resolution understanding. Coupling ΔBHETase into a two-enzyme system overcomes the challenge of heterogeneous product formation and results in up to 7.0-fold improved TPA production than seven state-of-the-art PET hydrolases, under the conditions used here. Finally, we employ a ΔBHETase-joined tandem chemical-enzymatic approach to valorize 21 commercial post-consumed plastics into virgin PET and an example chemical (p-phthaloyl chloride) for achieving the closed-loop PET recycling and open-loop PET upcycling.

Enhanced degradation of polyethylene terephthalate plastics by CdS/CeO2 heterojunction photocatalyst activated peroxymonosulfate

Waste plastics have posed enormous to the environment, but their recycling, especially polyethylene terephthalate plastics, was still a huge challenge. Here, CdS/CeO₂ was used as the photocatalyst to promote the degradation of PET-12 plastics by activating peroxymonosulfate (PMS) synergistic photocatalytic system. The results showed that 10 % CdS/CeO₂ had the best performance under the illumination condition, and the weight loss rate of PET-12 could reach 93.92 % after adding 3 mM PMS. The effects of important parameters (PMS dose and co-existing anions) on PET-12 degradation were systematically studied, and the excellent performance of the photocatalytic-activated PMS system was verified by comparison experiments. SO₄^•- contributed the most to the degradation performance of PET-12 plastics, which was demonstrated by electron paramagnetic resonance (EPR) and free radical quenching experiments. Furthermore, the results of GC showed that the gas products including CO, and CH₄. This indicated that the mineralized products could be further reduced to hydrocarbon fuel under the action of the photocatalyst. This job supplied a new idea for the photocatalytic treatment of waste microplastics in the water, which will help recycle waste plastics and recycle carbon resources.

Impact of Covid-19 pandemic lockdown on the urban litter and clean environment index

Changing the level of pollution in the urban environment is one of the consequences of Covid-19. Litter are one of the most important urban pollutants affected by the Covid-19 pandemic. In this research, the pollution level of urban areas during the Covid-19 pandemic was investigated by studying the urban environment. To this end, the protocol of observation and counting was used and litter were studied in two groups including common litter and Covid-19 related litter in Yasuj, Iran. The results were interpreted based on the clean environment index (CEI). The time of observation was selected based on the peak of the disease and the decline in the incidence rate. The results showed that on average, at the peak of the disease, the density of the litter was reduced by 19% compared to the low lockdown related to Covid-19. The CEI on average was 4.76 at the peak of the disease that was interpreted in the clean status, while the CEI on average was 5.94 at the low lockdown related to Covid-19 so interpreted in the moderate status. Among urban land uses, recreational areas with a difference of more than 60% showed the greatest impact caused by Covid-19, while in commercial areas this difference was less than 3%. The effect of Covid-19 related litter on the calculated index was 73% in the worst case and 0.8% in the lowest case. Although Covid-19 decreased the number of litter in urban areas, the emergence of Covid-19 lockdown related litter was a cause for concern and led to increasing the CEI.

Global plastic upcycling during and after the COVID-19 pandemic: The status and perspective

Plastic pollution has become one of the most pressing environmental issues worldwide since the vast majority of post-consumer plastics are hard to degrade in the environment. The coronavirus disease (COVID-19) pandemic had disrupted the previous effort of plastic pollution mitigation to a great extent due to the overflow of plastic-based medical waste. In the post-pandemic era, the remaining challenge is how to motivate global action towards a plastic circular economy. The need for one package of sustainable and systematic plastic upcycling approaches has never been greater to address such a challenge. In this review, we summarized the threat of plastic pollution during COVID-19 to public health and ecosystem. In order to solve the aforementioned challenges, we present a shifting concept, regeneration value from plastic waste, that provides four promising pathways to achieve a sustainable circular economy: 1) Increasing reusability and biodegradability of plastics; 2) Transforming plastic waste into high-value products by chemical approaches; 3) The closed-loop recycling can be promoted by biodegradation; 4) Involving renewable energy into plastic upcycling. Additionally, the joint efforts from different social perspectives are also encouraged to create the necessary economic and environmental impetus for a circular economy.

Activated carbons derived from polyethylene terephthalate for coin-cell supercapacitor electrodes

We successfully prepared activated carbon derived from polyethylene terephthalate (PET) via carbonization and subsequent activation under various conditions and applied it as active material for supercapacitors. In the activation, we used CO2 for physical activation or KOH for chemical activation and varied the activation temperature from 600 °C to 1,000 °C. We found that CO2 activation is unsuitable because of insufficient pore formation or low activation yield. Interestingly, PET-derived activated carbon obtained using KOH (PETK) at 700 °C-900 °C exhibited higher specific surface areas than YP50f, which is a commercial activated carbon. Furthermore, some PETKs even displayed a dramatic increase in crystallinity. In particular, the PET-derived activated carbon prepared at 900 °C with KOH (PETK900) had the highest retention rate at a high charge-discharge rate and better durability after 2500 cycles than YP50f. Furthermore, employing the same process that we used with the PET chips, we successfully converted waste PET bottles into activated carbon materials. Waste PET-derived activated carbons exhibited good electrochemical performance as active material for supercapacitors. We thus found chemical activation with KOH to be an appropriate method for manufacturing PET-derived activated carbon and PETKs derived both from PET chips and waste PET have considerable potential for commercial use as active materials for supercapacitors.

Electronic Supplementary Material

Supplementary material is available for this article at 10.1007/s11814-023-1466-3 and is accessible for authorized users.

Circularity in waste management: a research proposal to achieve the 2030 Agenda

Waste management is the main challenge in the transition away from the linear "take-make-dispose" economy. Incorporating the principles of circularity in waste management would facilitate the achievement of Sustainable Development Goals. This paper aims to provide state-of-the-art research about circular waste management in the fulfillment of the 2030 Agenda. For this purpose, bibliometric analysis by VOSviewer and SciMat software is used to define the evolution and to detect research trends. Based on the main gaps identified in studies, a research agenda to guide for further opportunities in this field is suggested. The results obtained four clusters that address sustainable industrial infrastructure, biological waste management, recycling in developing countries and recovery processes. Four research propositions are established, focusing on plastic waste management and generation trends, circular municipal waste management, more sustainable landfill management, and enablers such as indicators and legislation. The transformation towards more bio and ecological models requires social, regulatory and organizational tools that consider the best interests and capacity of companies, public authorities and consumers. In addition, policy implications are considered.

Biodegradation of Expanded and Extruded Polystyrene with Different Diets by Using Zophobas atratus Larvae (Coleoptera: Tenebrionidae)

Polystyrene waste pollutes the environment and poses a significant health risk to humans, animals, and marine ecology. This study aims to evaluate the effectiveness of degradation on expanded (EPS) and extruded (XPS) polystyrene with different diets using superworms (Zophobas atratus larvae) obtained in Malaysia. The growth and development of the larvae after consumption of EPS and XPS and the gut microbial community changes in response to high polystyrene consumption diets were also identified. The oatmeal, wheat bran, and cornmeal were used as supplement diets and showed significantly enhanced EPS and XPS consumption and degradation compared to sole diet treatment. Gel permeation chromatography was carried out using egested frass of Z. atratus larvae to characterize depolymerization of EPS and XPS, indicating a significant reduction in the average molecular weight and average molecular weight. The highest reduction occurred in the presence of oatmeal. Proton nuclear magnetic resonance and Fourier transform infrared spectroscopy analyses indicated functional group changes and chemical modification occurred with depolymerization and partial oxidation of EPS and XPS. The larvae length increased, while the number of instars and duration of larvae became shorter with the addition of supplement diets. Oatmeal is predominantly effective among other supplements in assisting Z. atratus larvae with EPS and XPS degradation. The results of this study support the ubiquity of polystyrene biodegradation in Z. atratus and the next-generation sequencing studies. Kluyvera sp., Klebsiella sp., and Enterobacter sp. were found to be strongly associated with degrading EPS and XPS polystyrene with oatmeal as a supplemental diet.

A critical review on recent research progress on microplastic pollutants in drinking water

Plastic pollution is an emerging issue in recent days. Persistent plastic particles reach the atmosphere, land and water by multiple pathways. Research has confirmed that the existence of plastic particles is found surprisingly everywhere, from the Artic to the Antarctic region. The probability of ingestion of plastic by all living forms is quite natural, as the whole planet's environment is polluted with microplastic particles. The bioaccumulation of microplastics is a threat and the consequences for living beings are yet to be explored. Microplastics present in different drinking water sources like rivers, lakes, treatment units etc. are studied by several researchers, covering various aspects. Research carried out by various scientists on the microplastics in different drinking water sources is highlighted in this review. In view of the previous research carried out on various aspects of microplastic particles, the necessity of a uniform protocol for qualitative and quantitative analysis of microplastic is ascertained. Microplastic pollution is an ongoing environmental concern, it must be addressed and research should be expanded.

Current knowledge on the presence, biodegradation, and toxicity of discarded face masks in the environment

During the first year of the COVID-19 pandemic, facemasks became mandatory, with a great preference for disposable ones. However, the benefits of face masks for health safety are counteracted by the environmental burden related to their improper disposal. An unprecedented influx of disposable face masks entering the environment has been reported in the last two years of the pandemic, along with their implications in natural environments in terms of their biodegradability, released contaminants and ecotoxicological effects. This critical review addresses several aspects of the current literature regarding the (bio)degradation and (eco)toxicity of face masks related contaminants, identifying uncertainties and research needs that should be addressed in future studies. While it is indisputable that face mask contamination contributes to the already alarming plastic pollution, we are still far from determining its real environmental and ecotoxicological contribution to the issue. The paucity of studies on biodegradation and ecotoxicity of face masks and related contaminants, and the uncertainties and uncontrolled variables involved during experimental procedures, are compromising eventual comparison with conventional plastic debris. Studies on the abundance and composition of face mask-released contaminants (microplastics/fibres/ chemical compounds) under pre- and post-pandemic conditions should, therefore, be encouraged, along with (bio)degradation and ecotoxicity tests considering environmentally relevant settings. To achieve this, methodological strategies should be developed to overcome technical difficulties to quantify and characterise the smallest MPs and fibres, adsorbents, and leachates to increase the environmental relevancy of the experimental conditions.

Circular Economy Research in the COVID-19 Era: a Review and the Road Ahead

The onset of the Coronavirus Disease 2019 (COVID-19) pandemic has resulted in a major crisis that has severely impacted numerous economic, environmental, and social aspects of human life. During the pandemic, the potential of the circular economy (CE) has gained increasing attention as a prospective remedy for numerous sustainability problems. This systematic literature review charts CE research in the COVID-19 era. To this end, 160 journal articles were selected from the Scopus database. The performance indicators of the literature were determined and described through a bibliometric analysis. Moreover, the conceptual structure of CE research was identified via a keyword co-occurrence network. Based on bibliographic coupling, the focus of CE research in the COVID-19 era revolves mainly around five thematic areas, including: (1) waste management; (2) digitalization and sustainable supply chain management; (3) the impact of COVID-19 on food systems; (4) sustainable development goals, smart cities, and bioeconomy; and (5) closed-loop supply chains. Overall, this review contributes to enriching the literature by determining the main thematic areas and future research directions that can help to advance the transition to the CE and reduce the impact of COVID-19 and similar disasters in the future.

The Key to Solving Plastic Packaging Wastes: Design for Recycling and Recycling Technology

Confronted with serious environmental problems caused by the growing mountains of plastic packaging waste, the prevention and control of plastic waste has become a major concern for most countries. In addition to the recycling of plastic wastes, design for recycling can effectively prevent plastic packaging from turning into solid waste at the source. The reasons are that the design for recycling can extend the life cycle of plastic packaging and increase the recycling values of plastic waste; moreover, recycling technologies are helpful for improving the properties of recycled plastics and expanding the application market for recycled materials. This review systematically discussed the present theory, practice, strategies, and methods of design for recycling plastic packaging and extracted valuable advanced design ideas and successful cases. Furthermore, the development status of automatic sorting methods, mechanical recycling of individual and mixed plastic waste, as well as chemical recycling of thermoplastic and thermosetting plastic waste, were comprehensively summarized. The combination of the front-end design for recycling and the back-end recycling technologies can accelerate the transformation of the plastic packaging industry from an unsustainable model to an economic cycle model and then achieve the unity of economic, ecological, and social benefits.

Plastic wastes in the time of COVID-19: Their environmental hazards and implications for sustainable energy resilience and circular bio-economies

The global scope of pollution from plastic waste is a well-known phenomenon associated with trade, mass consumption, and disposal of plastic products (e.g., personal protective equipment (PPE), viral test kits, and vacuum-packaged food). Recently, the scale of the problem has been exacerbated by increases in indoor livelihood activities during lockdowns imposed in response to the coronavirus disease 2019 (COVID-19) pandemic. The present study describes the effects of increased plastic waste on environmental footprint and human health. Further, the technological/regulatory options and life cycle assessment (LCA) approach for sustainable plastic waste management are critically dealt in terms of their implications on energy resilience and circular economy. The abrupt increase in health-care waste during pandemic has been worsening environmental quality to undermine the sustainability in general. In addition, weathered plastic particles from PPE along with microplastics (MPs) and nanoplastics (NPs) can all adsorb chemical and microbial contaminants to pose a risk to ecosystems, biota, occupational safety, and human health. PPE-derived plastic pollution during the pandemic also jeopardizes sustainable development goals, energy resilience, and climate control measures. However, it is revealed that the pandemic can be regarded as an opportunity for explicit LCA to better address the problems associated with environmental footprints of plastic waste and to focus on sustainable management technologies such as circular bio-economies, biorefineries, and thermal gasification. Future researches in the energy-efficient clean technologies and circular bio-economies (or biorefineries) in concert with a "nexus" framework are expected to help reduce plastic waste into desirable directions.

Plastic biodegradation by in vitro environmental microorganisms and in vivo gut microorganisms of insects

Traditional plastics, such as polyethylene (PE), polystyrene (PS), polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyurethane (PUR), and other plastic polymers, are difficult to degrade and are gradually accumulated in the environment to cause a serious environmental problem, which is urgently needed to develop novel treatments or control technology. The biodegradation of plastics has gained great attention due to the advantages of green and safe characteristics. Microorganisms play a vital role in the biodegradation of plastics, including environmental microbes (in vitro) and gut microbes of insects (in vivo). Microbial degradation in environmental conditions in vitro is extremely slow for major plastics at degradation rates on the basis of a month or even a year time, but recent discoveries show that the fast biodegradation of specific plastics, such as PS, PE, and PUR, in some invertebrates, especially insects, could be enhanced at rates on basis of hours; the biodegradation in insects is likely to be gut microbial-dependent or synergetic bioreactions in animal digestive systems. This review comprehensively summarizes the latest 7-year (2016-2022) publications on plastic biodegradation by insects and microorganisms, elucidates the mechanism of plastic degradation in insects and environmental microbes, and highlights the cutting-edge perspectives for the potential applications of plastic biodegradation.

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

A review on production and application of activated carbon from discarded plastics in the context of 'waste treats waste'

In the post-COVID scenario, the annual increase in plastic waste has taken an upsurge due to the disposal of plastic masks, gloves and other protective equipment. To reduce the plastic load ending up in landfills and oceans or dumped at roadsides, the potential of using plastic polymers in different sectors has been investigated over the years leading to their potential application in pavement laying, concrete industry, fuel generation and production of carbon-based compounds among which activated carbons (AC) is a prime example. As one of the most recommended adsorbents for removing contaminants from water and adsorbing greenhouse gases, AC creates a potential sector for using discarded plastic to further treat pollutants and approach closer to a circular economy for plastics. This paper analyses the production process, the effect of production parameters on AC characteristics and properties that aid in adsorption. The interdependence of these factors determines the surface area, porosity, relative micropore and mesopore volume, thereby defining the utility for removing contaminant molecules of a particular size. Furthermore, this work discusses the application of AC along with a summary of the earlier works leading to the existing gaps in the research area. Production costs, formation of by-products including toxic substances and adsorbate selectivity are the major issues that have restricted the commercial application of this process towards its practical use. Research aimed at valorization of plastic waste into ACs would minimize the solid waste burden, along with treating other pollutants.

A review of disposable facemasks during the COVID-19 pandemic: A focus on microplastics release

The COVID-19 epidemic seriously threats the human society and provokes the panic of the public. Personal Protective Equipment (PPE) are widely utilized for frontline health workers to face the ongoing epidemic, especially disposable face masks (DFMs) to prevent airborne transmission of coronavirus. The overproduction and massive utilization of DFMs seriously challenge the management of plastic wastes. A huge amount of DFMs are discharged into environment, potentially induced the generation of microplastics (MPs) owing to physicochemical destruction. The MPs release will pose severe contamination burden on environment and human. In this review, environmental threats of DFMs regarding to DFMs fate in environment and DFMs threats to aquatic and terrestrial species were surveyed. A full summary of recent studies on MPs release from DFMs was provided. The knowledge of extraction and characterizations of MPs, the release behavior, and potential threats of MPs derived from DFMs was discussed. To confront the problem, feasible strategies for control DFMs pollution were analyzed from the perspective of source control and waste management. This review provides a better understanding the threats, fate, and management of DFMs linked to COVID-19 pandemic.

Novel strategy in biohydrogen energy production from COVID - 19 plastic waste: A critical review

Usage of plastics in the form of personal protective equipment, medical devices, and common packages has increased alarmingly during these pandemic times. Though they have served as an excellent protection source in minimizing the coronavirus disease (COVID-19) spreading, they have still emerged as major environmental pollutants nowadays. These non-degradable COVID-19 plastic wastes (CPW) were treated through incineration and landfilling process, which may lead to either the release of harmful gases or contaminating the surrounding environment. Further, they can cause numerous health hazards to the human and animal populations. These plastic wastes can be efficiently managed through thermochemical processes like pyrolysis or gasification, which assist in degrading the plastic waste and also effectively convert them into useful energy-yielding products. The pyrolysis process promotes the formation of liquid fuels and chemicals, whereas gasification leads to syngas and hydrogen fuel production. These energy-yielding products can help to compensate for the fossil fuels depletion in the near future. There are many insights explained in terms of the types of reactors and influential factors that can be adopted for the pyrolysis and gasification process, to produce high efficient energy products from the wastes. In addition, advanced technologies including co-gasification and two-stage gasification were also reviewed.

Research on the Anti-Risk Mechanism of Mask Green Supply Chain from the Perspective of Cooperation between Retailers, Suppliers, and Financial Institutions

Against the background of the pandemic, the mask supply chain faces the risk of pollution caused by discarded masks, the risk of insufficient funds of retailers, and the risk of mask overstock. To better guard against the above risks, this study constructed a two-party game model and a cusp catastrophe model from the perspective of the mask green supply chain, and studied the strategic choices of retailers and suppliers in the supply chain affected by the risk of capital constraints and overstock. The result shows that the risk shocks will lead to the disruption of the mask green supply chain, and the main factors affecting the strategy choice of mask suppliers and retailers are mask recycling rate, deposit ratio, risk occurrence time, etc. In further research, this study involved a mechanism for financial institutions, mask retailers, and the government to jointly deal with the risk of mask overstock, the risk of retailers' insufficient funds, and the risk of environmental pollution from discarded masks. The research path and conclusion of this study reveal the risks in the circulation area of mask supplies during the pandemic, and provide recommendations for planning for future crises and risk prevention.

Prospects of TiO2-based photocatalytic degradation of microplastic leachates related disposable facemask, a major COVID-19 waste

COVID-19 is one of the serious catastrophes that have a substantial influence on human health and the environment. Diverse preventive actions were implemented globally to limit its spread and transmission. Personnel protective equipment (PPE) was an important part of these control approaches. But unfortunately, these types of PPE mainly comprise plastics, which sparked challenges in the management of plastic waste. Disposable face masks (DFM) are one of the efficient strategies used across the world to ward off disease transmission. DFMs can contribute to micro and nano plastic pollution as the plastic present in the mask may degrade when exposed to certain environmental conditions. Microplastics (MPs) can enter the food chain and devastate human health. Recognizing the possible environmental risks associated with the inappropriate disposal of masks, it is crucial to avert it from becoming the next plastic crisis. To address this environmental threat, titanium dioxide (TiO2)-based photocatalytic degradation (PCD) of MPs is one of the promising approaches. TiO2-based photocatalysts exhibit excellent plastic degradation potential due to their outstanding photocatalytic ability, cost efficiency, chemical, and thermal stability. In this review, we have discussed the reports on COVID-19 waste generation, the limitation of current waste management techniques, and the environmental impact of MPs leachates from DFMs. Mainly, the prominence of TiO2 in the PCD and the applications of TiO2-based photocatalysts in MPs degradation are the prime highlights of this review. Additionally, various synthesis methods to enhance the photocatalytic performance of TiO2 and the mechanism of PCD are also discussed. Furthermore, current challenges and the future research perspective on the improvement of this approach have been proposed.

Polyhydroxyalkanoate (PHA) Biopolymer Synthesis by Marine Bacteria of the Malaysian Coral Triangle Region and Mining for PHA Synthase Genes

Polyhydroxyalkanoate (PHA), a biodegradable and plastic-like biopolymer, has been receiving research and industrial attention due to severe plastic pollution, resource depletion, and global waste issues. This has spurred the isolation and characterisation of novel PHA-producing strains through cultivation and non-cultivation approaches, with a particular interest in genes encoding PHA synthesis pathways. Since sea sponges and sediment are marine benthic habitats known to be rich in microbial diversity, sponge tissues (Xestospongia muta and Aaptos aaptos) and sediment samples were collected in this study from Redang and Bidong islands located in the Malaysian Coral Triangle region. PHA synthase (phaC) genes were identified from sediment-associated bacterial strains using a cultivation approach and from sponge-associated bacterial metagenomes using a non-cultivation approach. In addition, phylogenetic diversity profiling was performed for the sponge-associated bacterial community using 16S ribosomal ribonucleic acid (16S rRNA) amplicon sequencing to screen for the potential presence of PHA-producer taxa. A total of three phaC genes from the bacterial metagenome of Aaptos and three phaC genes from sediment isolates (Sphingobacterium mizutaii UMTKB-6, Alcaligenes faecalis UMTKB-7, Acinetobacter calcoaceticus UMTKB-8) were identified. Produced PHA polymers were shown to be composed of 5C to nC monomers, with previously unreported PHA-producing ability of the S. mizutaii strain, as well as a 3-hydroxyvalerate-synthesising ability without precursor addition by the A. calcoaceticus strain.

Theoretical investigation on the interactions of microplastics with a SARS-CoV-2 RNA fragment and their potential impacts on viral transport and exposure

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the coronavirus disease-19 (COVID-19) pandemic spread across the world and remains difficult to control. Environmental pollution and habitat conditions do facilitate SARS-CoV-2 transmission as well as increase the risk of exposure to SARS-CoV-2. The coexistence of microplastics (MPs) with SARS-CoV-2 affects the viral behavior in the indoor and outdoor environment, and it is essential to study the interactions between MPs and SARS-CoV-2 because they both are ubiquitously present in our environment. To determine the mechanisms underlying the impact of MPs on SARS-CoV-2, we used molecular dynamic simulations to investigate the molecular interactions between five MPs and a SARS-CoV-2 RNA fragment at temperatures ranging from 223 to 310 K in vacuum and in water. We furthermore compared the interactions of MPs and SARS-CoV-2 RNA fragment to the performance of SARS-CoV-1 and Hepatitis B virus (HBV) RNA fragments in interacting with the MPs. The interaction affinity between the MPs and the SARS-CoV-2 RNA fragment was found to be greater than the affinity between the MPs and the SARS-CoV-1 or HBV RNA fragments, independent of the environmental media, temperature, and type of MPs. The mechanisms of the interaction between the MPs and the SARS-CoV-2 RNA fragment involved electrostatic and hydrophobic processes, and the interaction affinity was associated with the inherent structural parameters (i.e., molecular volume, polar surface area, and molecular topological index) of the MPs monomers. Although the evidence on the infectious potential of SARS-CoV-2 RNA is not fully understood, humans are exposed to MPs via their lungs, and the strong interaction with the gene materials of SARS-CoV-2 likely affects the exposure of humans to SARS-CoV-2.

COVID-19: An Accelerator for Global Plastic Consumption and Its Implications

Plastic has been ingrained in our society. Repercussions on the usage of nonbiodegradable plastics and their problems have been recently realized. Despite its detrimental environmental impact, the COVID-19 epidemic has compelled worldwide citizens to increase their plastic use due to affordability and availability. The volume of hospital solid waste, particularly plastics, is overgrowing due to an unexpected increase in medical waste, culminating in the global waste management catastrophe. Henceforth, adopting good waste management practices along with appropriate technologies and viewing the current issue from a fresh perspective would be an opportunity in this current scenario. Accordingly, this review study will focus on the plastic waste scenario before and during the COVID-19 epidemic. This review also disseminates alternative disposal options and recommends practical solutions to lessen human reliance on traditional plastics. Further, the responsibilities of various legislative and regulatory authorities at the local, regional, and worldwide levels are addressed.

Prospect of microplastic pollution control under the "New normal" concept beyond COVID-19 pandemic

Coronavirus disease (COVID-19) has led to increasing demand for single-use plastic which aggravates the already existing plastic waste problem. Not only does the demand for personal protective equipment (PPE) increase, but also people shift their preference to online shopping and food delivery to comply with administrative policies for COVID-19 pandemic control. The used PPEs, packaging materials, and food containers may not be handled or recycled properly after their disposal. As a result, the mismanaged plastic waste is discharged into the environment and it may pose even greater risks after breaking into smaller fragments, which was regarded as the source of secondary microplastics (MPs, < 5 mm) or nanoplastics (NPs, < 1 μm). The main objective of this manuscript is to provide a review of the studies related to microplastic release due to pandemic-associated plastic waste. This study summarizes the limited work published on the ecotoxicological/toxicological effect of MPs/NPs released from PPE on aquatic organisms, soil organisms, as well as humans. Given the current status of research on MPs from COVID-related plastic waste, the immediate research directions needed on this topic were discussed.

Micro(nano)plastics in food system: potential health impacts on human intestinal system

Micro(nano)plastics (MNPs) in human food system have been broadly recognized by researchers and have drawn an increasing public attention to their potential health risks, particularly the risk to the intestinal system regarding the long-term exposure to MNPs through food consumption. This study aims to review the environmental properties (formation and composition) of MNPs and MNPs pollution in human food system following the order of food production, food processing and food consumption. The current analytic and identical technologies utilized by researchers are also summarized in this review. In fact, parts of commonly consumed food raw materials, processed food and the way to take in food all become the possible sources for human MNPs ingestion. In addition, the available literatures investigating MNPs-induced intestinal adverse effect are discussed from in vitro models and in vivo mammalian experiments, respectively. Particle translocation, cytotoxicity, damaged gut barrier, intestinal inflammation as well as microbial alteration are mostly reported. Moreover, the practical remediation strategies for MNPs pollution are also illustrated in the last section. This review is expected to provide a research insight for foodborne MNPs and arouse more public awareness of MNPs pollution in food and potential risk for human intestinal health.

Mask consumption and biomedical waste generation rate during Covid-19 pandemic: A case study of central India

The rapid generation of biomedical waste (BMW) due to covid-19 pandemic has created burden on the existing municipal solid waste management (MSWM) system in both developed and developing countries. The substantial influx of covid patients in Maharashtra, India has influenced the pattern of BMW generation, especially for the yellow category of BMW and incineration facilities. The objective of the study was to estimate the daily face mask consumption (DFM) and BMW generation from May 2020 to August 2021 in Maharashtra, India. The study was carried out based on the confirmed covid 19 cases, population forecast, urban population (%), BMW generation rate (kg/bed/day), and so on. The data set for the each paramters were collected from web-portals, published reports based on previous studies. These data sets were further regrouped, processed and analyised using mathematical equations. The study also revealed that Mumbai, Pune, and Thane districts, India has contributed ≥ 60% of the DFM and BMW generation. It was found that the DFM by non-covid patients was higher compared to the covid patients (DCFM). Further, it was revealed that BMW generated in the months of July 2020 (152 tons/day), August 2020 (228 tons/day), September 2020 (364 tons/day), October 2020 (177 tons/day), March 2021 (405 tons/day), April 2021 (1,102 tons/day), May 2021 (705 tons/day), June 2021 (194 tons/day), and July 2021 (149 tons/day), exceeded the existing BMW treatment capcity of 132 tons/day. The sudden spike in covid-19 cases has influenced the pattern of DFM and BMW generation, espeicllay for the yellow category of BMW (BMWCY) and has increased the burden on BMW incineration facilities. The daily emission rates from BMW-incineration was in the order PM10> NO2> CO>SO2, with maximum emission of PM10 (85.61 kg of pollutant/day). The F-test was performed using one-way ANOVA to understand the influence of covid cases on daily face mask consumption. It was found that F-satistic of DCFM and BMWCY is more than the F-critical i.e., increase in covid cases had a significant effect on mass consumption rate and BMW generation.

Advances in Polyethylene Terephthalate Beverage Bottle Optimization: A Mini Review

Compared with other materials, polyethylene terephthalate (PET) has high transparency, excellent physical and mechanical properties in a wide temperature range and good hygiene and safety, so it is widely used in the packaging industry, especially in the packaging of beverages and foods. The optimization of PET bottles is mainly reflected in three aspects: material optimization, structure optimization and process optimization, among which there is much research on material optimization and process optimization, but there is no complete overview on structure optimization. A summary of structural optimization is necessary. Aiming at structural optimization, the finite element method is a useful supplement to the beverage packaging industry. By combining the computer-aided design technology and using finite element software for finite element simulation, researchers can replace the experimental test in the pre-research design stage, predict the effect and save cost. This review summarizes the development of PET bottles for beverage packaging, summarizes various optimization methods for preventing stress cracking in beverage packaging, and especially focuses on comparing and evaluating the effects of several optimization methods for packaging structure. Finally, the future development of all kinds of optimization based on structural optimization in the field of beverage packaging is comprehensively discussed, including personalized design, the combination of various methods and the introduction of actual impact factor calculation.

Persistence of avian influenza virus (H9N2) on plastic surface

Plastics have been found to be colonized with pathogens and may become vectors for transmission of diseases. In this study, we evaluated the persistence of H9N2 avian influenza virus (AIV) on the surfaces of various plastics (PP, PE, PS, PET, PVC, PMMA) under different environmental conditions using glass and stainless steel for comparison. Our results showed that the RNA abundance of AIV on plastics was decreased over time but still detectable 14 days after AIV had been dropped on plastic surfaces. Low temperature (4 °C) was more favorable for AIV RNA preservation and infectivity maintenance. The abundance of AIV RNA was significantly greater on polyethylene terephthalate (PET) than that on glass and stainless steel at higher temperature (i.e., 25 °C and 37 °C) and lower humidity (<20% and 40-60%) (p < 0.05). Infectivity assay showed that AIV infectivity was only maintained at 4 °C after 24 h of incubation. Taken together, the persistence of AIV was more affected by environmental factors than material types. Plastics were able to preserve viral RNA more effectively in relatively high-temperature or low-humidity environments. Our study indicates that environmental factors should be taken into consideration when we evaluate the capacity of plastics to spread viruses.

The use of Personal Protective Equipment (PPE) and associated environmental challenges: A study on Dhaka, Bangladesh

The Covid-19 pandemic has caused health crisis and concerns worldwide. The use of Personal Protective Equipment (PPE) has been the primary behavioral and policy response to avert the infection of coronavirus. The emergence of the situation resulted in increased production of PPE, creating a surge in plastic pollution and carbon footprint. The consumption of PPEs is unavoidable; however, proper PPE waste disposal plays a vital role in lessening the associated environmental impacts. This study aims to provide an overview of the environmental challenges associated with Covid-19 pandemic faced in the households located at the heart of Bangladesh, Dhaka City Corporation (DCC) area. The study determines carbon footprint in terms of carbon emission equivalent and plastic pollution potential associated with PPEs. The study further implies that there is a gap in the 3R Strategy implementation in Bangladesh hindering the nation in achieving UN's SDG-12. The findings depict that the proper implementation of the 3R strategy is fundamental for ensuring more a resilient, sustainable and livable environment in the in-pandemic and post-pandemic era and further emphasizes that a strengthened policy framework, operational environmental policy tools, environmental education, and the society and stakeholders' spontaneous response to the plastic pollution challenge are essentially required.

Impact of waste of COVID-19 protective equipment on the environment, animals and human health: a review

During the Corona Virus Disease 2019 (COVID-19) pandemic, protective equipment, such as masks, gloves and shields, has become mandatory to prevent person-to-person transmission of coronavirus. However, the excessive use and abandoned protective equipment is aggravating the world's growing plastic problem. Moreover, above protective equipment can eventually break down into microplastics and enter the environment. Here we review the threat of protective equipment associated plastic and microplastic wastes to environments, animals and human health, and reveal the protective equipment associated microplastic cycle. The major points are the following:1) COVID-19 protective equipment is the emerging source of plastic and microplastic wastes in the environment. 2) protective equipment associated plastic and microplastic wastes are polluting aquatic, terrestrial, and atmospheric environments. 3) Discarded protective equipment can harm animals by entrapment, entanglement and ingestion, and derived microplastics can also cause adverse implications on animals and human health. 4) We also provide several recommendations and future research priority for the sustainable environment. Therefore, much importance should be attached to potential protective equipment associated plastic and microplastic pollution to protect the environment, animals and humans.

Virtual Methodology for Household Waste Characterization During The Pandemic in An Urban District of Peru: Citizen Science for Waste Management

The Covid-19 pandemic has caused the alteration of many aspects of the solid waste management chain, such as variations in the waste composition, generation and disposal. Various studies have examined these changes with analysis of integrated waste management strategies; qualitative studies on perceived variations and statistical evaluations based on waste collected or disposed in landfills. Despite this information there is a need for updated data on waste generation and composition, especially in developing countries. The objective of this article is to develop a data sampling and analytical approach for the collection of data on household waste generation and composition during the pandemic; and, in addition, estimate the daily generation of masks in the study area. The proposed methodology is based on the principles of citizen science and utilizes virtual tools to contact participants, and for the training and collection of information. The study participants collected the information, installed segregation bins in their homes and trained their relatives in waste segregation. The article presents the results of the application of the methodology in an urban district of Lima (Peru) in August 2020. The results suggest an apparent decrease in household waste per capita and a slight increase in plastics composition in the study area. It is estimated that each participant generates 0.124 masks per day and 0.085 pairs of gloves per day. The method developed and results presented can be used as a tool for public awareness and training on household waste characterization and segregation. Furthermore it can provide the necessary evidence to inform policy directives in response household waste issues and Covid-19 restrictions.

Practical Challenges and Opportunities for Marine Plastic Litter Reduction in Manila: A Structural Equation Modeling

Land-based plastic pollution has increased to the level of an epidemic due to improper plastic waste management, attributed to plastic waste flux into the marine environment. The extant marine plastic litter (MPL) literature focuses primarily on the monitoring and assessment of the problem, but it fails to acknowledge the link between the challenges and opportunities for MPL reduction. The study aimed to examine the practical challenges and opportunities influencing the reduction of marine plastic litter in Manila in the Philippines. Data collected through an online survey from 426 barangays were analyzed using structural equation modeling (SEM) and were then validated using interviews and focused group discussions. Good internal consistency (0.917) and convergent and discriminant validity were achieved. The empirical study has established structural model fit measures of RMSEA (0.021), SRMR (0.015), CFI (0.999), and TLI (0.994), with a good parsimonious fit of the chi-square/degrees of freedom ratio of 1.190. The findings revealed that environmental governance regarding waste management policies and guidelines, COVID-19 regulations for waste management, community participation, and socio-economic activities have positively affected marine plastic litter leakage and solution measures. Environmental governance significantly and partially mediates the effects of, e.g., COVID-19-related waste and socio-economic activities on MPL leakage. However, there is no relationship between the waste management infrastructure and environmental governance. The findings shed light on how to enhance environmental governance to reduce marine plastic litter and address Manila’s practical challenges.