Pharmaceuticals, hormones, plasticizers, and pesticides in drinking water

Fluoride in Raw Rice (Oryza sativa): a Global Systematic Review and Probabilistic Health Risk Assessment

Rice (Oryza sativa) is one of the essential staple foods highly consumed globally, with nearly 40% to 45% of the global population estimated to consume rice. Therefore, consumable rice should have low levels of harmful elements. This study investigates fluoride (F¯) content in raw rice (uncooked rice) and evaluates Probabilistic Health Risk Assessment (PHRA) through Monte Carlo simulation (MCS) due to the consumption of F¯ enriched rice. The literature review reveals that limited studies have been conducted on the investigation of F¯ in raw rice. The fluoride (F¯) concentration in raw rice varies across the studied countries, indicating the need for additional studies to facilitate a more accurate comparison. The F¯ content in raw rice varied among the studied countries, making it difficult to definitively state that the concentration of F¯ in one country is higher. However, the concentration of F¯ in raw rice in India is notably elevated. This study also highlighted the importance of investigating the F¯ content in raw rice. The study will be highly helpful for policymakers to formulate guidelines for water used for irrigation.

Concentration of steroid hormones in sediment of surface water resources in China: systematic review and meta-analysis with ecological risk assessment

The risk quotient (RQ) related to Estrone (E1), 17β-E2 (E2), Estriol (E3) and 17α-ethynylestradiol (EE2) in sediment of water resources in China was calculated using Monte Carlo Simulation (MCS) method. Fifty-four papers with 64 data-reports included in our study. The rank order of steroid hormones in sediment based on log-normal distribution in MCS was E1 (3.75 ng/g dw) > E3 (1.53 ng/g dw) > EE2 (1.38 ng/g dw) > E2 (1.17 ng/g dw). According to results, concentration of steroid hormones including E1, E2 and E3 in sediment of Erhai lake, northern Taihu lake and Dianchi river was higher than other locations. The rank order of steroid hormones based on percentage high risk (RQ > 1) was EE2 (87.00%) > E1 (70.00%) > E2 (62.99%) > E3 (11.11%). Hence, contamination control plans for steroid hormones in sediment of water resources in China should be conducted continuously.

Occurrence and Ecological Risk of Alkylamine Triazines in Chinese Estuarine Sediments: An Emerging Class of Persistent, Mobile, and Toxic Substances

Identifying persistent, mobile, and toxic (PMT) substances from synthetic chemicals is critical for chemical management and ecological risk assessment. Inspired by the triazine analogues (e.g., atrazine and melamine) in the original European Union's list of PMT substances, the occurrence and compositions of alkylamine triazines (AATs) in the estuarine sediments of main rivers along the eastern coast of China were comprehensively explored by an integrated strategy of target, suspect, and nontarget screening analysis. A total of 44 AATs were identified, of which 23 were confirmed by comparison with authentic standards. Among the remaining tentatively identified analogues, 18 were emerging pollutants not previously reported in the environment. Tri- and di-AATs were the dominant analogues, and varied geographic distributions of AATs were apparent in the investigated regions. Toxic unit calculations indicated that there were acute and chronic risks to algae from AATs on a large geographical scale, with the antifouling biocide cybutryne as a key driver. The assessment of physicochemical properties further revealed that more than half of the AATs could be categorized as potential PMT and very persistent and very mobile substances at the screening level. These results highlight that AATs are a class of PMT substances posing high ecological impacts on the aquatic environment and therefore require more attention.

Bioprospecting photosynthetic microorganisms for the removal of endocrine disruptor compounds

Endocrine disruption compounds can be found in various daily products, like pesticides, along with cosmetic and pharmaceutical commodities. Moreover, occurrence of EDCs in the wastewater alarms the urgency for their removal before discharge owing to the harmful effect for the environment and human health. Compared to implementation of physical and chemical strategies, cultivation of photosynthetic microorganisms has been acknowledged for their high efficiency and eco-friendly process in EDCs removal along with accumulation of valuable byproducts. During the process, photosynthetic microorganisms remove EDCs via photodegradation, bio-adsorption, -accumulation, and -degradation. Regarding their high tolerance in extreme environment, photosynthetic microorganisms have high feasibility for implementation in wastewater treatment plant. However, several considerations are critical for their scaling up process. This review discussed the potency of EDCs removal by photosynthetic microorganisms and focused on the efficiency, mechanism, challenge, along with the prospect. Details on the mechanism's pathway, accumulation of valuable byproducts, and recent progress in scaling up and application in real wastewater were also projected in this review.

Pollution and endometriosis: A deep dive into the environmental impacts on women's health

BACKGROUND

The interaction between pollution and endometriosis is a pressing issue that demands immediate attention. The impact of pollution, particularly air and water pollution, or occupational hazards, on hormonal disruption and the initiation of endometriosis remains a major issue.

OBJECTIVES

This narrative review aims to delve into the intricate connection between pollution and endometriosis, shedding light on how environmental factors contribute to the onset and severity of this disease and, thus, the possible public health policy implications.

DISCUSSION

Endocrine-disrupting chemicals (EDCs) in pollutants dysregulate the hormonal balance, contributing to the progression of this major gynaecological disorder. Air pollution, specifically PM2.5 and PAHs, has been associated with an increased risk of endometriosis by enhancing chronic inflammation, oxidative stress, and hormonal imbalances. Chemical contaminants in water and work exposures, including heavy metals, dioxins, and PCBs, disrupt the hormonal regulation and potentially contribute to endometriosis. Mitigating the environmental impact of pollution is required to safeguard women's reproductive health. This requires a comprehensive approach involving stringent environmental regulations, sustainable practices, responsible waste management, research and innovation, public awareness, and collaboration among stakeholders.

CONCLUSION

Public health policies have a major role in addressing the interaction between pollution and endometriosis in a long-term commitment.

Deep eutectic solvents with solid supports used in microextraction processes applied for endocrine-disrupting chemicals

The determination of endocrine-disrupting chemicals (EDCs) has become one of the biggest challenges in Analytical Chemistry. Due to the low concentration of these compounds in different kinds of samples, it becomes necessary to employ efficient sample preparation methods and sensitive measurement techniques to achieve low limits of detection. This issue becomes even more struggling when the principles of the Green Analytical Chemistry are added to the equation, since finding an efficient sample preparation method with low damaging properties for health and environment may become laborious. Recently, deep eutectic solvents (DESs) have been proposed as the most promising green kind of solvents, but also with excellent analytical properties due to the possibility of custom preparation with different components to modify their polarity, viscosity or aromaticity among others. However, conventional extraction techniques using DESs as extraction solvents may not be enough to overcome challenges in analysing trace levels of EDCs. In this sense, combination of DESs with solid supports could be seen as a potential solution to this issue allowing, in different ways, to determine lower concentrations of EDCs. In that aim, the main purpose of this review is the study of the different strategies with solid supports used along with DESs to perform the determination of EDCs, comparing their advantages and drawbacks against conventional DES-based extraction methods.

Concentration of Heavy Metals in Traditional and Industrial Fruit Juices from Iran: Probabilistic Risk Assessment Study

Exposure to heavy metals can endanger the health of exposed people in the long term. The consumption of fruit juice is increasing; it is important to estimate the health risk of consumers due to heavy metals. The current study was carried out for the analysis of toxic metals (lead (Pb), arsenic (As), and cadmium (Cd)) and essential elements (copper (Cu) and zinc (Zn)) in 60 samples of traditional and industrial fruit juices (10 samples of different brands of apple, orange, grape, peach, mango, and pineapple) in Hamadan, West Iran, using inductivity coupled plasma optical emission spectrometry (ICP-OES) method. The validation protocol included precision of the analytical method; recovery, the determination of the limit of detection (LOD), the limit of quantification (LOQ), and linearity were measured. Moreover, risk assessment was detected using target hazard quotient (THQ) and cancer risk (CR) by the Monte Carlo simulation (MCS) model. The ranking of metal concentration in traditional and industrial fruit juices was Zn > Cu > As > Pb > Cd. In all samples, concentrations of heavy metals in industrial fruit juices were higher than traditional fruit juices p <  < 0.001. The level of metals in all samples was lower of the US Environmental Protection Agency (USEPA), the World Health Organization (WHO), and the Iran Standard (IS) permissible limit set for drinking water. In terms of non-carcinogenic, values of toxic elements for children and adult in traditional and industrial fruit juices were 1.6E-3 and 1.72E-3 and 2.6E-3 and 1.85E-3, respectively. The 95th percentile of CR in adults and children due to both industrial and traditional fruits juices was higher than 1E-6; hence, reducing the concentration of As in fruit juices should be conducted. Consumption of fruit juice can increase carcinogenic risk of consumers. Therefore, it is recommended to consume it with caution.

Safety Stressors and Coal Miners' Safety Performance: The Mediating Role of Resilience and Coping Styles

Purpose

This study aimed to investigate the effects of three different safety stressors (safety role ambiguity, safety role conflicts, and safety interpersonal conflicts) on safety performance of coal miners under the mediating role of resilience and coping styles.

Patients and Methods

The study is cross-sectional. To collect data to analyze the hypothesized relationships in the present study, a total of 450 questionnaires were distributed to coal miners in Shannxi Province of China. Regression analysis was employed as the main statistical technique in analyzing the data using SPSS 22.0 and Process 4.1.

Results

The results of regression analysis indicate that the three kind of safety stressors have a negative predictive effect on coal miners' safety performance. Resilience and coping styles both were the mediating variables between the safety stressors (safety role ambiguity, safety role conflicts, and safety interpersonal conflicts) and coal miners' safety performance, and resilience and coping styles play a chain mediating role between the safety stressors (safety role ambiguity, safety role conflicts, and safety interpersonal conflicts) and safety performance of coal miners.

Conclusion

This study further explores the mechanism between safety stressors and safety performance, providing theoretical guidance for improving the safety performance of coal mines. It emphasizes the importance of coal miner's resilience intervention, positive coping styles promotion, and negative coping styles prevention in coal mine safety production.

Drinking water quality status in Malaysia: a scoping review of occurrence, human health exposure, and potential needs

BACKGROUND

Like other countries, surface water degradation in Malaysia is linked with common global issues. Although different aspects of drinking water suitability have been examined, the overall understanding of drinking water quality in Malaysia is poor.

OBJECTIVE

Hence, the present review aims to provide an understanding of drinking water (tap water, groundwater, gravity feed system) quality and its potential implications on policy, human health, and drinking water management law and identification of potential direction of future drinking water research and management needs in Malaysia.

METHODS

This study utilized a scoping review method. PRISMA Extension for Scoping Reviews was used for search strategy. Relevant studies were screened using the selected keywords and databases.

RESULTS

A total of 26 drinking water quality studies involving tap water, groundwater, and gravity feed systems have been selected for review. These studies found that the majority of Malaysian Drinking Water and WHO Drinking Water standards have been met. High levels of Cu, Cd, Fe and Pb were attributable to galvanized plumbing and pipe material corrosion. Variation of fluoride in tap water depends on dosage planning and operational processes of the public water supply. Pollutants (nitrate and ammonia) in groundwater and gravity feed system water have been linked to agricultural practices in rural areas. Microbiological quality in tap water is associated with growing biofilms inside the pipelines while in groundwater is caused by shallow surface events. However, only eight studies have reported about the human risks of chemical pollutants in tap water.

IMPACT STATEMENT

The review discusses the state of drinking water quality in Malaysia and its impact on public health. It suggests that policymakers can use this information to improve the quality of drinking water and enforce restrictions, while also raising public awareness about the importance of safe drinking water. The study can guide future research and initiatives in Malaysia, ultimately contributing to efforts to ensure access to clean and dependable drinking water.

Monitoring Pharmaceuticals and Personal Care Products in Drinking Water Samples by the LC-MS/MS Method to Estimate Their Potential Health Risk

(1) The occurrence and accumulation of pharmaceuticals and personal care products in the environment are recognized scientific concerns. Many of these compounds are disposed of in an unchanged or metabolized form through sewage systems and wastewater treatment plants (WWTP). WWTP processes do not completely eliminate all active substances or their metabolites. Therefore, they systematically leach into the water system and are increasingly contaminating ground, surface, and drinking water, representing a health risk largely ignored by legislative bodies. Especially during the COVID-19 pandemic, a significantly larger amount of medicines and protective products were consumed. It is therefore likely that contamination of water sources has increased, and in the case of groundwater with a delayed effect. As a result, it is necessary to develop an accurate, rapid, and easily available method applicable to routine screening analyses of potable water to monitor and estimate their potential health risk. (2) A multi-residue UHPLC-MS/MS analytical method designed for the identification of 52 pharmaceutical products was developed and used to monitor their presence in drinking water. (3) The optimized method achieved good validation parameters, with recovery of 70-120% of most analytes and repeatability achieving results within 20%. In real samples of drinking water, at least one analyte above the limit of determination was detected in each of the 15 tap water and groundwater samples analyzed. (4) These findings highlight the need for legislation to address pharmaceutical contamination in the environment.

Photocatalytic degradation of bisphenol A in aqueous solution using TiO2/clinoptilolite hybrid photocatalyst

Photocatalytic degradation of bisphenol A (BPA) was investigated using commercial TiO2 P25 nanoparticles supported on natural zeolite clinoptilolite (Cli). Employing ultrasound assisted solid-state dispersion method hybrid photocatalyst containing 20 wt% of TiO2, marked TCli-20, was prepared. The structural, morphological and surface properties, and particle size distribution of TCli-20 were studied by X-ray powder diffraction, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, atomic force microscopy, Brunner-Emmet-Teller method and laser diffraction. The results revealed a successful loading of TiO2 P25 nanoparticles on Cli surface and the preservation of both zeolitic structure and optical properties of TiO2. The influence of catalyst dose, pH value and the addition of hydrogen peroxide (H2O2) was evaluated. The optimal reaction conditions were 2 g/L of catalyst at near-neutral conditions (pH = 6.4) for complete BPA (5 mg/L) photodegradation after 180 min of exposure to simulated solar light. The addition of H2O2 was beneficial for the degradation process and led to the removal of BPA after 120 min of irradiation. BPA removal (60% for 180 min of irradiation) was reduced when TCli-20 was tested in bottled drinking water due to the presence of bicarbonate ions which acted as scavengers for hydroxyl radicals. Even though the photocatalytic activity of TCli-20 decreased after several cycles of usage, 70% of BPA was still successfully degraded during the fourth cycle. The reusability study showed easy separation, stability and good photocatalytic ability of investigated cost-effective hybrid photocatalyst.

Efficient Validation Strategies in Environmental Analytical Chemistry: A Focus on Organic Micropollutants in Water Samples

This article critically reviews analytical method validation and quality control applied to the environmental chemistry field. The review focuses on the determination of organic micropollutants (OMPs), specifically emerging contaminants and pesticides, in the aquatic environment. The analytical technique considered is (gas and liquid) chromatography coupled to mass spectrometry (MS), including high-resolution MS for wide-scope screening purposes. An analysis of current research practices outlined in the literature has been performed, and key issues and analytical challenges are identified and critically discussed. It is worth emphasizing the lack of specific guidelines applied to environmental analytical chemistry and the minimal regulation of OMPs in waters, which greatly affect method development and performance, requirements for method validation, and the subsequent application to samples. Finally, a proposal is made for method validation and data reporting, which can be understood as starting points for further discussion with specialists in environmental analytical chemistry.

Formation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the electrochemical oxidation of polluted waters with pharmaceuticals used against COVID-19

The COVID-19 pandemic has produced a huge impact on our lives, increasing the consumption of certain pharmaceuticals, and with this, contributing to the intensification of their presence in wastewater and in the environment. This situation demands the implementation of efficient remediation technologies, among them, electrochemical oxidation (ELOX) is one the most applied. This work studies the application of ELOX with the aim of eliminate pharmaceuticals used in the fight against COVID-19, assessing its degradation rate, as well as the risk of formation of toxic trace by-products, such as unintentional POPs like polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To this end, model solutions containing 10 mg L^-1 of dexamethasone (DEX), paracetamol (PAR), amoxicillin (AMX), and sertraline (STR) with two different electrolytes (NaCl and Na₂SO₄) have been evaluated. However, electrochemical systems that contain chloride ions in solution together with PCDD/Fs precursor molecules may lead to the formation of these highly toxic by-products. So, PCDD/Fs were quantified under conditions of complete degradation of the drugs. Furthermore, the presence of PCDD/Fs precursors such as chlorophenols was determined, as well as the role of Cl^-, Cl^• and SO 4 • - radicals in the formation of the by-products and PCDD/Fs. The maximum measured concentration of PCDD/Fs was around 2700 pg L^-1 for the amoxicillin case in NaCl medium. The obtained results emphasise the importance of not underestimating the potential formation of these highly toxic trace by-products, in addition to the correct selection of oxidation processes and operation variables, in order to avoid final higher toxicity in the medium.

Recent Trends in Multiclass Analysis of Emerging Endocrine Disrupting Contaminants (EDCs) in Drinking Water

Ingestion of water is a major route of human exposure to environmental contaminants. There have been numerous studies exploring the different compounds present in drinking water, with recent attention drawn to a new class of emerging contaminants: endocrine-disrupting compounds (EDCs). EDCs encompass a broad range of physio-chemically diverse compounds; from naturally occurring to manmade. Environmentally, EDCs are found as mixtures containing multiple classes at trace amounts. Human exposure to EDCs, even at low concentrations, is known to lead to adverse health effects. Therefore, the ability to evaluate EDC contamination with a high degree of sensitivity and accuracy is of the utmost importance. This review includes (i) discussion on the perceived and actual risks associated with EDC exposure (ii) regulatory actions that look to limit EDC contamination (iii) analytical methods, including sample preparation, instrumentation and bioassays that have been advanced and employed for multiclass EDC identification and quantitation.

Fabrication of HKUST-1/ZnO/SA nanocomposite for Doxycycline and Naproxen adsorption from contaminated water

Doxycycline and Naproxen are among the most widely used drugs in the therapy of CoVID 19 disease found in surface water. Water scarcity in recent years has led to research to treat polluted water. One of the easy and low-cost methods for treatment is adsorption. The utilize of Metal-Organic Frameworks (MOFs) to evacuate pharmaceutical contaminants from water sources has been considered by researchers in the last decade. In this research, HKUST-1/ZnO/SA composite with high adsorption capacity, chemical and water stability, recovery, and reuse properties has been synthesized and investigated. By adding 10 wt% of ZnO and 50 wt% of sodium alginate to HKUST-1, at 25 °C and pH = 7, the specific surface area is reduced by 60%. The parameters of drugs concentration C₀ =(5,80) mg/L, time=(15,240) min, and pH= (2,12) were investigated, and the results showed that the HKUST-1/ZnO/SA is stable in water for 14 days and it can be used in 10 cycles with 80% removal efficiency. The maximum Adsorption loading of doxycycline and Naproxen upon HKUST-1/ZnO/SA is 97.58 and 80.04 mg/g, respectively. Based on the correlation coefficient (R²), the pseudo-second-order and the Langmuir isotherm models were selected for drug adsorption. The proposed mechanism of drug uptake is by MOFs, hydrogen bonding, electrostatic bonding, and acid-base interaction.

Occurrence, Distribution, and Human Exposure of Emerging Liquid Crystal Monomers (LCMs) in Indoor and Outdoor Dust: A Nationwide Study

Liquid crystal monomers (LCMs) are a class of emerging, persistent, bioaccumulative, and toxic organic pollutants. They are detected in various environmental matrixes that are associated with electronic waste (e-waste) dismantling. However, their occurrence and distribution in indoor and outdoor dust on a national scale remain unknown. In this study, a dedicated target analysis quantified a broad range of 60 LCMs in dust samples collected across China. The LCMs were frequently detected in indoor (n = 48) and outdoor dust (n = 97; 37 sampled concomitantly with indoors dust) from dwellings, and indoor dust from cybercafés (n = 34) and phone repair stores (n = 22), with median concentrations of 41.6, 94.7, 106, and 171 ng/g, respectively. No significant spatial difference was observed for the concentrations of the total LCMs among distinct geographical regions (p > 0.05). The median daily intake values of the total LCMs via dust ingestion, dermal contact, and inhalation were estimated at 1.50 × 10^-2, 2.90 × 10^-2, and 8.57 × 10^-6 ng/kg BW/day for adults and 1.47 × 10^-1, 1.22 × 10^-1, and 2.18 × 10^-5 ng/kg BW/day for children, respectively. These estimates suggested higher exposure risks for children and indicated that dust ingestion and dermal contact significantly contribute to the human intake of LCMs. The microenvironmental pollution levels of LCMs together with the potential exposure risks associated with some of these chemicals are of concern for human health.