Soil plastisphere: Exploration methods, influencing factors, and ecological insights

A metabolomics perspective on the effect of environmental micro and nanoplastics on living organisms: A review

The increasing trend regarding the use of plastics has arisen an exponential concern on the fate of their derived products to the environment. Among these derivatives, microplastics and nanoplastics (MNPs) have been featured for their associated environmental impact due to their low molecular size and high surface area, which has prompted their ubiquitous transference among all environmental interfaces. Due to the heterogenous chemical composition of MNPs, the study of these particles has focused a high number of studies, as a result of the myriad of associated physicochemical properties that contribute to the co-transference of a wide range of contaminants, thus becoming a major challenge for the scientific community. In this sense, both primary and secondary MNPs are well-known to be adscribed to industrial and urbanized areas, from which they are massively released to the environment through a multiscale level, involving the atmosphere, hydrosphere, and lithosphere. Consequently, much research has been conducted on the understanding of the interconnection between those interfaces, that motivate the spread of these contaminants to biological systems, being mostly represented by the biosphere, especially phytosphere and, finally, the anthroposphere. These findings have highlighted the potential hazardous risk for human health through different mechanisms from the environment, requiring a much deeper approach to define the real risk of MNPs exposure. As a result, there is a gap of knowledge regarding the environmental impact of MNPs from a high-throughput perspective. In this review, a metabolomics-based overview on the impact of MNPs to all environmental interfaces was proposed, considering this technology a highly valuable tool to decipher the real impact of MNPs on biological systems, thus opening a novel perspective on the study of these contaminants.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Biofilms in plastisphere from freshwater wetlands: Biofilm formation, bacterial community assembly, and biogeochemical cycles

Microorganisms can colonize to the surface of microplastics (MPs) to form biofilms, termed "plastisphere", which could significantly change their physiochemical properties and ecological roles. However, the biofilm characteristics and the deep mechanisms (interaction, assembly, and biogeochemical cycles) underlying plastisphere in wetlands currently lack a comprehensive perspective. In this study, in situ biofilm formation experiments were performed in a park with different types of wetlands to examine the plastisphere by extrinsic addition of PVC MPs in summer and winter, respectively. Results from the spectroscopic and microscopic analyses revealed that biofilms attached to the MPs in constructed forest wetlands contained the most abundant biomass and extracellular polymeric substances. Meanwhile, data from the high-throughput sequencing showed lower diversity in plastisphere compared with soil bacterial communities. Network analysis suggested a simple and unstable co-occurrence pattern in plastisphere, and the null model indicated increased deterministic process of heterogeneous selection for its community assembly. Based on the quantification of biogeochemical cycling genes by high-throughput qPCR, the relative abundances of genes involving in carbon degradation, carbon fixation, and denitrification were significantly higher in plastisphere than those of soil communities. This study greatly enhanced our understanding of biofilm formation and ecological effects of MPs in freshwater wetlands.

The Plasticene era: Current uncertainties in estimates of the hazards posed by tiny plastic particles on soils and terrestrial invertebrates

Plastics are ubiquitous in our daily life. Large quantities of plastics leak in the environment where they weather and fragment into micro- and nanoparticles. This potentially releases additives, but rarely leads to a complete mineralization, thus constitutes an environmental hazard. Plastic pollution in agricultural soils currently represents a major challenge: quantitative data of nanoplastics in soils as well as their effects on biodiversity and ecosystem functions need more attention. Plastic accumulation interferes with soil functions, including water dynamics, aeration, microbial activities, and nutrient cycling processes, thus impairing agricultural crop yield. Plastic debris directly affects living organisms but also acts as contaminant vectors in the soils, increasing the effects and the threats on biodiversity. Finally, the effects of plastics on terrestrial invertebrates, representing major taxa in abundance and diversity in the soil compartment, need urgently more investigation from the infra-individual to the ecosystem scales.

Effects of combined microplastics and heavy metals pollution on terrestrial plants and rhizosphere environment: A review

Microplastics (MPs) can enter the soil environment through industry, agricultural production and daily life sources. Their interaction with heavy metals (HMs) poses a significant threat to a variety of terrestrial ecosystems, including agricultural ones, thereby affecting crop quality and threatening human health. This review initially addresses the impact of single and combined contamination with MPs and HMs on soil environment, including changes in soil physicochemical properties, microbial community structure and diversity, fertility, enzyme activity and resistance genes, as well as alterations in heavy metal speciation. The article further explores the effects of this pollution on the growth characteristics of terrestrial plants, such as plant biomass, antioxidant systems, metabolites and photosynthesis. In general, the combined contaminants tend to significantly affect soil environment and terrestrial plant growth, i.e., the impact of combined contaminants on plants weight ranged from -87.5% to 4.55%. Similarities and differences in contamination impact levels stem from the variations in contaminant types, sizes and doses of contaminants and the specific plant growth environments. In addition, MPs can not only infiltrate plants directly, but also significantly affect the accumulation of HMs in terrestrial plants. The heavy metals concentration in plants under the treatment of MPs were 70.26%-36.80%. The co-occurrence of these two pollution types can pose a serious threat to crop productivity and safety. Finally, this study proposes suggestions for future research aiming to address current gaps in knowledge, raises awareness about the impact of combined MPs + HMs pollution on plant growth and eco-environmental security.

Freeze-thaw aged polyethylene and polypropylene microplastics alter enzyme activity and microbial community composition in soil

In cold regions, microplastics (MPs) in the soil undergo freeze-thaw (FT) aging process. Little is known about how FT aged MPs influence soil physico-chemical properties and microbial communities. Here, two environmentally relevant concentrations (50 and 500 mg/kg) of 50 and 500 µm polyethylene (PE) and polypropylene (PP) MPs treated soils were subjected to 45-day FT cycles (FTCs). Results showed that MPs experienced surface morphology, hydrophobicity and crystallinity alterations after FTCs. After 45-day FTCs, the soil urease (SUE) activity in control (MPs-free group that underwent FTCs) was 33.49 U/g. SUE activity in 50 µm PE group was reduced by 19.66 %, while increased by 21.16 % and 37.73 % in 500 µm PE and PP groups compared to control. The highest Shannon index was found in 50 µm PP-MPs group at 50 mg/kg, 2.26 % higher than control (7.09). Compared to control (average weighted degree=8.024), all aged MPs increased the complexity of network (0.19-1.43 %). Bacterial biomarkers of aged PP-MPs were associated with pollutant degradation. Aged PP-MPs affected genetic information, cellular processes, and disrupted the biosynthesis of metabolites. This study provides new insights into the potential hazards of MPs after FTCs on soil ecosystem in cold regions.

Effects of microplastics on soil microorganisms and microbial functions in nutrients and carbon cycling - A review

The harmful effects of microplastics (MPs) pollution in the soil ecosystem have drawn global attention in recent years. This paper critically reviews the effects of MPs on soil microbial diversity and functions in relation to nutrients and carbon cycling. Reports suggested that both plastisphere (MP-microbe consortium) and MP-contaminated soils had distinct and lower microbial diversity than that of non-contaminated soils. Alteration in soil physicochemical properties and microbial interactions within the plastisphere facilitated the enrichment of plastic-degrading microorganisms, including those involved in carbon (C) and nutrient cycling. MPs conferred a significant increase in the relative abundance of soil nitrogen (N)-fixing and phosphorus (P)-solubilizing bacteria, while decreased the abundance of soil nitrifiers and ammonia oxidisers. Depending on soil types, MPs increased bioavailable N and P contents and nitrous oxide emission in some instances. Furthermore, MPs regulated soil microbial functional activities owing to the combined toxicity of organic and inorganic contaminants derived from MPs and contaminants frequently encountered in the soil environment. However, a thorough understanding of the interactions among soil microorganisms, MPs and other contaminants still needs to develop. Since currently available reports are mostly based on short-term laboratory experiments, field investigations are needed to assess the long-term impact of MPs (at environmentally relevant concentration) on soil microorganisms and their functions under different soil types and agro-climatic conditions.

Microplastics derived from plastic mulch films and their carrier function effect on the environmental risk of pesticides

Plastic film mulching can maintain soil water and heat conditions, promote plant growth and thus generate considerable economic benefits in agriculture. However, as they age, these plastics degrade and form microplastics (MPs). Additionally, pesticides are widely utilized to control organisms that harm plants, and they can ultimately enter and remain in the environment after use. Pesticides can also be sorbed by MPs, and the sorption kinetics and isotherms explain the three stages of pesticide sorption: rapid sorption, slow sorption and sorption equilibrium. In this process, hydrophobic and partition interactions, electrostatic interactions and valence bond interactions are the main sorption mechanisms. Additionally, small MPs, biodegradable MPs and aged conventional MPs often exhibit stronger pesticide sorption capacity. As environmental conditions change, especially in simulated biological media, pesticides can desorb from MPs. The utilization of pesticides by environmental microorganisms is the main factor controlling the degradation rate of pesticides in the presence of MPs. Pesticide sorption by MPs and size effects of MPs on pesticides are related to the internal exposure level of biological pesticides and changes in pesticide toxicity in the presence of MPs. Most studies have suggested that MPs exacerbate the toxicological effects of pesticides on sentinel species. Hence, the environmental risks of pesticides are altered by MPs and the carrier function of MPs. Based on this, research on the affinity between MPs and various pesticides should be systematically conducted. During agricultural production, pesticides should be cautiously selected and used plastic film to ensure human health and ecological security.

Meta-analysis of impacts of microplastics on plant heavy metal(loid) accumulation

The co-occurrence of microplastics (MPs) and heavy metal(loid)s (HMs) has attracted growing scientific interest because of their wide distribution and environmental toxicity. Nevertheless, the interactions between MPs and HMs in soil-plant systems remain unclear. We conducted a meta-analysis with 3226 observations from 87 independent studies to quantify the impact of MPs addition on the plant biomass and HMS accumulation. Co-occurrence of MPs and HMs (except for As) induced synergistic toxicity to plant growth. MPs promoted their uptake in the shoot by 11.0% for Cd, 30.0% for Pb, and 47.1% for Cu, respectively. In contrast, MPs caused a significant decrease (22.6%, 17.9-26.9%) in the shoot As accumulation. The type and dose of MPs were correlated with the accumulation of HMs. MPs increased available concentrations of Cd, Pb, and Cu, but decreased available As concentration in soils. Meanwhile, MPs addition significantly lowered soil pH. These findings may provide explanations for MPs-mediated effects on influencing the accumulation of HMs in plants. Using a machine learning approach, we revealed that soil pH and total HMs concentration are the major contributors affecting their accumulation in shoot. Overall, our study indicated that MPs may increase the environmental risks of HMs in agroecosystems, especially metal cations.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Microplastics affect soil-plant system: Implications for rhizosphere biology and fitness of sage (Salvia officinalis L.)

A mesocosm experiment was set-up to investigate the effects of low-density polyethylene (LDPE) fragments deriving from plastic film on soil ecology, rhizosphere and plant (Salvia officinalis L.) fitness. The internal transcribed spacer (ITS) and 16S metagenomic analysis was adopted to evaluate taxonomic and functional shifts of both soil and rhizosphere under the influence of microplastics (MPs). Photosynthetic parameters and enzymes involved in oxidative stress were assessed to unveil the plant physiological state. MP fragments were analysed by scanning electron microscope (SEM) and metagenomics to investigate the plastisphere. Microbial biomarkers of MPs pollution were identified in soil and rhizosphere, reinforcing the concept of molecular biomonitoring. Overall, Bacillus, Nocardioides and Streptomyces genera are bacterial biomarkers of MPs pollution in soil whereas Aspergillus, Fusarium and Trichoderma genera, and Nectriaceae family are fungal biomarkers of MPs polluted soil. The data show that the presence of MPs promotes the abundance of taxa involved in the soil N cycle, but simultaneously reduces the endophytic interaction capability and enhances pathogen related functions at the rhizosphere level. A significant decrease in chlorophyll levels and increase of oxidative stress enzymes was observed in plants grown in MPs-polluted soil. The SEM observations of MPs fragments revealed a complex colonisation, where bacteria (Bacillus in MPSo and Microvirga in MPRz) and fungi (Aspergillus in MPSo and Trichoderma in MPRz) represent the main colonisers. The results demonstrate that the presence of MPs causes changes in the soil and rhizosphere microbial community and functions leading to negative effects on plant fitness.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Isolation, characteristics, and poly(butylene adipate-co-terephthalate) (PBAT) degradation mechanism of a marine bacteria Roseibium aggregatum ZY-1

Marine microorganisms have been reported to degrade microplastics. However, the degradation mechanisms are still poorly understood. In this study, a bacterium Roseibium aggregatum ZY-1 was isolated from seawater, which can degrade poly(butylene adipate-co-terephthalate) (PBAT). The PBAT-PLA(polylactic acid, PLA) films, before and after degradation, were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR), the weight loss rate and water contact angle were measured. The results indicate that ZY-1 colonized on PBAT-PLA film, changed the functional groups and decreased water contact angle of PBAT-PLA film. Moreover, liquid chromatography mass spectrometry (LC-MS) analysis reveales that PBAT was degraded into its oligomers (TB, BTB) and monomers (T, A) during 10 days, and adipic acid (A) could be used as a sole carbon source. The whole genome sequencing analyses illustrate the mechanisms and enzymes such as PETase, carboxylesterases, arylesterase (PpEst) and genes like pobA, pcaBCDFGHIJKT, dcaAEIJK, paaGHJ involved in PBAT degradation. Therefore, the R. aggregatum ZY-1 will be a promising candidate of PBAT degradation.

Effects of microplastics on photosynthesized C allocation in a rice-soil system and its utilization by soil microbial groups

The effect of microplastics (MPs) on the allocation of rice photosynthetic carbon (C) in paddy systems and its utilization by soil microorganisms remain unclear. In this study, 13C-CO2 pulse labeling was used to quantify the input and allocation of photosynthetic C in a rice-soil system under MPs amendment. Rice was pulse-labeled at tillering growth stage under 0.01% and 1% w/w polyethylene (PE) and polyvinyl chloride (PVC) MP amendments. Plants and soils were sampled 24 h after pulse labeling. Photosynthesized C in roots in MP treatments was 30-54% lower than that in no-MP treatments. The 13C in soil organic C (SOC) in PVC-MP-amended bulk soil was 4.3-4.7 times higher than that in no-MP treatments. PVC and high-dose PE increased the photosynthetic C in microbial biomass C in the rhizosphere soil. MPs altered the allocation of photosynthetic C to microbial phospholipid fatty acid (PLFA) groups. High-dose PVC increased the 13C gram-positive PLFAs. Low-dose PE and high-dose PVC enhanced 13C in fungal PLFAs in bulk soil (including arbuscular mycorrhizal fungi (AMF) and Zygomycota) by 175% and 197%, respectively. The results highlight that MPs alter plant C input and microbial utilization of rhizodeposits, thereby affecting the C cycle in paddy ecosystems.

Elucidating the impacts of microplastics on soil greenhouse gas emissions through automatic machine learning frameworks

With the rise in global plastic production and agricultural demand, the released microplastics (MPs) have increasingly influenced the elemental cycles of soils, leading to notable effects on greenhouse gas emissions. Despite initial research, there remains a gap in establishing a detailed modeling approach that comprehensively explores the impacts of MPs on GHG emissions. Herein, we utilized literature mining to assemble a comprehensive dataset examining the interplays between MPs and emissions of CO2, CH4, and N2O. Five automated machine learning frameworks were employed for predictive modeling. The GAMA framework was particularly effective in predicting CO2 (Q2 = 0.946) and CH4 (Q2 = 0.991) emissions. The Autogluon framework provided the most accurate prediction for N2O emission, though it exhibited signs of overfitting. Interpretability analysis indicated that the type of MPs significantly influenced CO2 emission. Degradable MPs (i.e., polyamide) inherently led to elevated CO2 emission, and the environmental aging further exacerbated this effect. Although both linear and nonlinear correlations between MPs and CH₄ emission were not identified, the incorporation of specific MPs that elevate soil pH, augment soil water retention, and cultivate anaerobic conditions may potentially elevate soil CH₄ emission. This research underscores the profound influence of MPs on soil GHG emissions, providing vital insights for shaping agricultural policies and soil management practices in the context of escalating plastic use.

Agroecological transition: towards a better understanding of the impact of ecology-based farming practices on soil microbial ecotoxicology

Alternative farming systems have developed since the beginning of industrial agriculture. Organic, biodynamic, conservation farming, agroecology and permaculture, all share a grounding in ecological concepts and a belief that farmers should work with nature rather than damage it. As ecology-based agricultures rely greatly on soil organisms to perform the functions necessary for agricultural production, it is thus important to evaluate the performance of these systems through the lens of soil organisms, especially soil microbes. They provide numerous services to plants, including growth promotion, nutrient supply, tolerance to environmental stresses and protection against pathogens. An overwhelming majority of studies confirm that ecology-based agricultures are beneficial for soil microorganisms. However, three practices were identified as posing potential ecotoxicological risks: the recycling of organic waste products, plastic mulching, and pest and disease management with biopesticides. The first two because they can be a source of contaminants; the third because of potential impacts on non-target microorganisms. Consequently, developing strategies to allow a safe recycling of the increasingly growing organic matter stocks produced in cities and factories, and the assessment of the ecotoxicological impact of biopesticides on non-target soil microorganisms, represent two challenges that ecology-based agricultural systems will have to face in the future.

Selective enrichment of virulence factor genes in the plastisphere under antibiotic and heavy metal pressures

The growing accumulation of plastic waste in the environment has created novel habitats known as the "plastisphere", where microorganisms can thrive. Concerns are rising about the potential for pathogenic microorganisms to proliferate in the plastisphere, posing risks to human health. However, our knowledge regarding the virulence and pathogenic potential of these microorganisms in the plastisphere remains limited. This study quantified the abundance of virulence factor genes (VFGs) in the plastisphere and its surrounding environments (water and soil) to better assess pathogenic risks. Our findings revealed a selective enrichment of VFGs in the plastisphere, which were attributed to the specific microbial community assembled. The presence of arsenic and ciprofloxacin in the plastisphere exerted additional co-selective pressures, intensifying the enrichment of VFGs. Notably, VFGs that encoded multiple functions or enhanced the survival of host microorganisms (e.g., encoding adherence functions) tended to accumulate in the plastisphere. These versatile and environmentally adaptable VFGs are more likely to be favored by bacteria in the environment, warranting increased attention in future investigations due to their potential for widespread dissemination. In terms of virulence and pathogenicity, this research offers new insights into evaluating pathogen-related risks in the plastisphere.

Effects of heavy metal and disinfectant on antibiotic resistance genes and virulence factor genes in the plastisphere from diverse soil ecosystems

Antibiotic-resistance genes (ARGs) are world-wide contaminants posing potential health risks. Quaternary ammonium compounds (QACs) and heavy metals can apply selective pressure on antibiotic resistance. However, there is a lack of evidence regarding their coupled effect on changes in ARGs and virulence factor genes (VFGs) in various soil types and their plastispheres. Herein, we conducted a microcosm experiment to explore the abundances and profiles of ARGs and VFGs in soil plastispheres from three distinct types of soils amended with Cu and disinfectants. The plastispheres enriched the ARGs' abundance compared to soils and stimulated the coupling effect of combined pollutants on promoting the abundances of ARGs and VFGs. Horizontal gene transfer inevitably accelerates the propagation of ARGs and VFGs in plastispheres under pollutant stress. In plastispheres, combined exposure to disinfectants and Cu increased some potential pathogens' relative abundances. Moreover, the combined effect of disinfectants and Cu on ARGs and VFGs changed with soil type in plastispheres, emphasising the necessity to incorporate soil type considerations into health risk assessments for ARGs and VFGs. Overall, this study highlights the high health risks of ARGs under the selective pressure of combined pollutants in plastispheres and provides valuable insights for future risk assessments related to antibiotic resistance.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

The soil plastisphere

Understanding the effects of plastic pollution in terrestrial ecosystems is a priority in environmental research. A central aspect of this suite of pollutants is that it entails particles, in addition to chemical compounds, and this makes plastic quite different from the vast majority of chemical environmental pollutants. Particles can be habitats for microbial communities, and plastics can be a source of chemical compounds that are released into the surrounding environment. In the aquatic literature, the term 'plastisphere' has been coined to refer to the microbial community colonizing plastic debris; here, we use a definition that also includes the immediate soil environment of these particles to align the definition with other concepts in soil microbiology. First, we highlight major differences in the plastisphere between aquatic and soil ecosystems, then we review what is currently known about the soil plastisphere, including the members of the microbial community that are enriched, and the possible mechanisms underpinning this selection. Then, we focus on outlining future prospects for research on the soil plastisphere.

Lake plastisphere as a new biotope in the Anthropocene: Potential pathogen colonization and distinct microbial functionality

The not-homogenous microplastics (MPs) distribution in freshwaters results in distinct microbial communities. Yet knowledge regarding plastisphere in metabolic pathways and element cycling behaviors remains limited. In this study, we collected MPs from 15 sampling sites in the Taihu Lake in China, and found that MPs were widely distributed in this freshwater lake, and dominantly composed of fibrous polyethylene terephthalate. Based on the metagenomic analysis, we found that MPs were colonized by Bacteroidia, Alpha-Proteobacteria, and Bacilli as a filter, but depleted in Verrucomicrobiae. Potential pathogens of plant eudicots and monocots were significantly enriched in plastisphere. Predicted functional profiles involved in the metabolism of other amino acids, biosynthesis of other secondary metabolites, and glycan biosynthesis and metabolism were overrepresented in plastisphere. Regarding elemental cycling, functional genes related to nitrogen fixation and nitrification showed 39.6% and 67.5% decline in plastisphere, whereas the genes involved in denitrification and nitrate reduction were significantly enriched. For sulfur cycles, the plastisphere exhibited higher sulfate reduction and sulfur oxidation system activities. Additionally, the taxonomic compositions and predicted functions in the plastispheres were mainly driven by the stochastic processes, while the deterministic processes were more important for the planktonic communities. The distinctions in the microbial composition, the predicted functionality, and the underly mechanisms between plastisphere and planktonic communities illustrated the unique ecology of the new anthropogenic-related plastisphere ecosystems.

Long-term application of organic fertilizer prompting the dispersal of antibiotic resistance genes and their health risks in the soil plastisphere

Microplastic (MP) pollution is a rapidly growing global environmental concern that has led to the emergence of a new environmental compartment, the plastisphere, which is a hotspot for the accumulation of antibiotic resistance genes (ARGs) and human bacterial pathogens (HBPs). However, studies on the effects of long-term organic fertilizer application on the dispersal of ARGs and virulence factor genes (VFGs) in the plastisphere of farmland soil have been limited. Here, we performed a field culture experiment by burying nylon bags filled with MPs in paddy soil that had been treated with different fertilizers for over 30 years to explore the changes of ARGs and VFGs in soil plastisphere. Our results show that the soil plastisphere amplified the ARG and VFG pollution caused by organic fertilization by 1.5 and 1.4 times, respectively. And it also led to a 2.7-fold increase in the risk of horizontal gene transfer. Meanwhile, the plastisphere tended to promote deterministic process in the community assembly of HBPs, with an increase of 1.4 times. Network analysis found a significant correlation between ARGs, VFGs, and bacteria in plastisphere. Correlation analysis highlight the important role of mobile genetic elements (MGEs) and bacterial communities in shaping the abundance of ARGs and VFGs, respectively. Our findings provide new insights into the health risk associated with the soil plastisphere due ARGs and VFGs derived from organic fertilizers.

Homogenization of bacterial plastisphere community in soil: a continental-scale microcosm study

Microplastics alter niches of soil microbiota by providing trillions of artificial microhabitats, termed the "plastisphere." Because of the ever-increasing accumulation of microplastics in ecosystems, it is urgent to understand the ecology of microbes associated with the plastisphere. Here, we present a continental-scale study of the bacterial plastisphere on polyethylene microplastics compared with adjacent soil communities across 99 sites collected from across China through microcosm experiments. In comparison with the soil bacterial communities, we found that plastispheres had a greater proportion of Actinomycetota and Bacillota, but lower proportions of Pseudomonadota, Acidobacteriota, Gemmatimonadota, and Bacteroidota. The spatial dispersion and the dissimilarity among plastisphere communities were less variable than those among the soil bacterial communities, suggesting highly homogenized bacterial communities on microplastics. The relative importance of homogeneous selection in plastispheres was greater than that in soil samples, possibly because of the more uniform properties of polyethylene microplastics compared with the surrounding soil. Importantly, we found that the degree to which plastisphere and soil bacterial communities differed was negatively correlated with the soil pH and carbon content and positively related to the mean annual temperature of sampling sites. Our work provides a more comprehensive continental-scale perspective on the microbial communities that form in the plastisphere and highlights the potential impacts of microplastics on the maintenance of microbial biodiversity and ecosystem functioning.

Microbial colonization patterns and biodegradation of petrochemical and biodegradable plastics in lake waters: insights from a field experiment

Introduction

Once dispersed in water, plastic materials become promptly colonized by biofilm-forming microorganisms, commonly known as plastisphere.

Methods

By combining DNA sequencing and Confocal Laser Scanning Microscopy (CLSM), we investigated the plastisphere colonization patterns following exposure to natural lake waters (up to 77 days) of either petrochemical or biodegradable plastic materials (low density polyethylene - LDPE, polyethylene terephthalate - PET, polylactic acid - PLA, and the starch-based MaterBi® - Mb) in comparison to planktonic community composition. Chemical composition, water wettability, and morphology of plastic surfaces were evaluated, through Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and static contact angle analysis, to assess the possible effects of microbial colonization and biodegradation activity.

Results and Discussion

The phylogenetic composition of plastisphere and planktonic communities was notably different. Pioneering microbial colonisers, likely selected from lake waters, were found associated with all plastic materials, along with a core of more than 30 abundant bacterial families associated with all polymers. The different plastic materials, either derived from petrochemical hydrocarbons (i.e., LDPE and PET) or biodegradable (PLA and Mb), were used by opportunistic aquatic microorganisms as adhesion surfaces rather than carbon sources. The Mb-associated microorganisms (i.e. mostly members of the family Burkholderiaceae) were likely able to degrade the starch residues on the polymer surfaces, although the Mb matrix maintained its original chemical structure and morphology. Overall, our findings provide insights into the complex interactions between aquatic microorganisms and plastic materials found in lake waters, highlighting the importance of understanding the plastisphere dynamics to better manage the fate of plastic debris in the environment.

Microplastics in agricultural soils on the coastal plain: Spatial characteristics, influencing factors and sources

Farmland is a major sink for microplastics (MPs), but research on MPs in coastal plain soil, particularly their occurrence in agricultural areas with changing coastlines, is limited. Here, we investigated the distribution, influencing factors and sources of MPs in a typical agricultural county near the southeast coast of China considering different human activities and soil property changes. The average MP concentration in farmland soils was 314 items/kg, ranging from 70.2 to 851.3 items/kg. MPs increased first and then decreased from inland to the coast, and this trend was greatly affected by coastline expansion. Bulk density, clay and textile points of interest (POIs) are the major factors affecting MPs in farmland. Network analysis was used to divide the whole MP community into two modules, and the average similarity between each MP community and the other 25.5 MP communities was >0.5. Overall, the similarity of the MP community tended to decrease with increasing geographical distance (P < 0.01). In the soil environmental factors group, bulk density and clay affected the total MP abundance, accounting for 14.7 % and 9.4 % of MPs, respectively. After fitting 8 types of POIs and the total MP diversity integrated index (MDII) of farmland, washing POIs (R2 = 0.65, P < 0.01) displayed the greatest and most significant fit with MDII, followed by clothing POIs (R2 = 0.29, P < 0.01). The MDII-POI results showed that the major POI sources of soil MPs were clothing manufacturing and washing POIs. Unlike in urban areas, automobile service POIs, packaging POIs and textile POIs had no significant relationship with the MDII, which may be related to the population and economic development scale. The results emphasize the importance of investigating MP occurrence and sources in coastal agricultural areas to promote the effective management of MPs and plastic emissions in land-sea transition zones.

Sub-micron microplastics affect nitrogen cycling by altering microbial abundance and activities in a soil-legume system

Recently, the environmental and agricultural impact of plastic waste has attracted considerable attention. Here, we investigated the impact of sub-micron polyethylene (PE) and polypropylene (PP) microplastics (MPs) on nitrogen cycling, with emphasis on bacterial abundance and diversity in a soil-soybean (Glycine max) system. Exposure to soil containing MPs (50 and 500 mg kg-1) did not affect soybean growth, but significantly increased plant nitrogen uptake, which was confirmed by increased activities of nitrogenase in the soil and glutamine synthetase in soybean root. Additionally, there was an increase in 16S gene copy number and carbon and nitrogen substrate utilization, indicating increased abundance and activity of rhizosphere microbial communities. Moreover, MP contamination affected the taxonomic profile of rhizosphere bacteria, especially the abundance of symbiotic and free-living bacteria involved in nitrogen cycling. Furthermore, qPCR analysis of nitrogen-related genes and Kyoto Encyclopedia of Genes and Genomes analysis of 16S rRNA gene sequencing data revealed an increased abundance of functional genes associated with nitrogen fixation and nitrification. However, the concentration and polymer type of MPs did not have a significant impact in our system. Overall, these results provide insights into the interactions between MPs and rhizosphere bacterial communities in the soil-legume system.

New mechanisms of biochar-assisted vermicomposting by recognizing different active di-(2-ethylhexyl) phthalate (DEHP) degraders across pedosphere, charosphere and intestinal sphere

Biochar-assisted vermicomposting can significantly accelerate soil DEHP degradation, but little information is known about the underlying mechanisms as different microspheres exist in soil ecosystem. In this study, we identified the active DEHP degraders in biochar-assisted vermicomposting by DNA stable isotope probing (DNA-SIP) and surprisingly found their different compositions in pedosphere, charosphere and intestinal sphere. Thirteen bacterial lineages (Laceyella, Microvirga, Sphingomonas, Ensifer, Skermanella, Lysobacter, Archangium, Intrasporangiaceae, Pseudarthrobacter, Blastococcus, Streptomyces, Nocardioides and Gemmatimonadetes) were responsible for in situ DEHP degradation in pedosphere, whereas their abundance significantly changed in biochar or earthworm treatments. Instead, some other active DEHP degraders were identified in charosphere (Serratia marcescens and Micromonospora) and intestinal sphere (Clostridiaceae, Oceanobacillus, Acidobacteria, Serratia marcescens and Acinetobacter) with high abundance. In biochar-assisted vermicomposting, the majority of active DEHP degraders were found in charosphere, followed by intestinal sphere and pedosphere. Our findings for the first time unraveled the spatial distribution of active DEHP degraders in different microspheres in soil matrices, explained by DEHP dynamic adsorption on biochar and desorption in earthworm gut. Our work highlighted that charosphere and intestinal sphere exhibited more contribution to the accelerated DEHP biodegradation than pedosphere, providing novel insight into the mechanisms of biochar and earthworm in improving contaminant degradation.

Microplastics in agriculture - a potential novel mechanism for the delivery of human pathogens onto crops

Mulching with plastic sheeting, the use of plastic carriers in seed coatings, and irrigation with wastewater or contaminated surface water have resulted in plastics, and microplastics, becoming ubiquitous in agricultural soils. Once in the environment, plastic surfaces quickly become colonised by microbial biofilm comprised of a diverse microbial community. This so-called 'plastisphere' community can also include human pathogens, particularly if the plastic has been exposed to faecal contamination (e.g., from wastewater or organic manures and livestock faeces). The plastisphere is hypothesised to facilitate the survival and dissemination of pathogens, and therefore plastics in agricultural systems could play a significant role in transferring human pathogens to crops, particularly as microplastics adhering to ready to eat crops are difficult to remove by washing. In this paper we critically discuss the pathways for human pathogens associated with microplastics to interact with crop leaves and roots, and the potential for the transfer, adherence, and uptake of human pathogens from the plastisphere to plants. Globally, the concentration of plastics in agricultural soils are increasing, therefore, quantifying the potential for the plastisphere to transfer human pathogens into the food chain needs to be treated as a priority.

Polyethylene and polyvinyl chloride microplastics promote soil nitrification and alter the composition of key nitrogen functional bacterial groups

Microplastics (MPs) contamination in soils seriously threatens agroecosystems globally. However, very few studies have been done on the effects of MPs on the soil nitrogen cycle and related functional microorganisms. To assess MP's impact on the soil nitrogen cycle and related functional bacteria, we carried out a one-month soil incubation experiment using typical acidic soil. The soil was amended with alfalfa meal and was spiked with 1% and 5% (mass percentage) of low-density polyethylene (LDPE) and polyvinyl chloride (PVC) MPs. Our results showed that both LDPE and PVC addition significantly increased soil nitrification rate and nitrate reductase activity, which could further promote soil denitrification. The relative abundance of diazotrophs, ammonium oxidizing, and denitrifying bacterial groups were significantly altered with MPs addition. Moreover, the MPs treatments greatly enhanced denitrifying bacteria richness. Redundancy analysis showed that nitrate reductase activity was the most significant factor affecting the soil functional bacterial community. Correlation analysis shows that Nitrosospira genus might be for the improvement of soil nitrification rate. Our results implied that MPs exposure could significantly affect the soil nitrogen cycling in farmland ecosystems by influencing essential nitrogen functional microorganisms and related enzymatic activities.

Abandoned disposable masks become hot substrates for plastisphere, whether in soil, atmosphere or water

A large number of surgical masks (SMs) to be discarded indiscriminately during the spread of COVID-19. The relationship between the changes of masks entering the environment and the succession of the microorganisms on them is not yet clear. The natural aging process of SMs in different environments (water, soil, and atmosphere) was simulated, the changes and succession of the microbial community on SMs with aging time were explored. The results showed that the SMs in water environment had the highest aging degree, followed by atmospheric environment, and SMs in soil had the lowest aging degree. The results of high-throughput sequencing demonstrated the load capacity of SMs for microorganisms, showed the important role of environment in determining microbial species on SMs. According to the relative abundance of microorganisms, it is found that compared with the water environment, the microbial community on SMs in water is dominated by rare species. While in soil, in addition to rare species, there are a lot of swinging strains on the SMs. Uncovering the ageing of SMs in the environment and its association with the colonization of microorganisms will help us understand the potential of microorganisms, especially pathogenic bacteria, to survive and migrate on SMs.

Distinct influence of conventional and biodegradable microplastics on microbe-driving nitrogen cycling processes in soils and plastispheres as evaluated by metagenomic analysis

Plastic mulching is one of the large contributors to microplastic (MP) accumulation in agricultural landscapes. However, the effects of conventional (PE-MPs) and biodegradable MPs (BMPs) on microbial functional and genomic information encoding nitrogen (N) cycling have yet to be addressed. Here, a soil microcosmic experiment was conducted by adding PE-MPs and BMPs to a Mollisol at dosage of 5% (w/w) followed by incubation for 90 days. The soils and MPs were examined by metagenomics and genome binning methods. The results revealed that BMPs harbored rougher surfaces and induced stronger alterations in microbial functional and taxonomic profiles in the soil and plastisphere than PE-MPs. In comparison to their respective soils, the plastispheres of PE-MPs and BMPs stimulated the processes of N fixation, N degradation and assimilatory nitrate reduction (ANRA) and reduced the gene abundances encoding nitrification and denitrification, in which BMPs induced stronger influences than PE-MPs. Ramlibacter mainly drove the differences in N cycling processes between the soils containing two types of MPs and was further enriched in the BMP plastisphere. Three high-quality genomes were identified as Ramlibacter stains with higher abundances in the plastisphere of BMP than that of PE-MP. These Ramlibacter strains had the metabolic capacities of N fixation, N degradation, ANRA and ammonium transport, which were potentially attributed to their biosynthesis and the accumulation of soil NH₄⁺-N. Taken together, our results highlight the genetic mechanisms of soil N bioavailability in the presence of biodegradable MPs, which have important implications for maintaining sustainable agriculture and controlling microplastic risk.

Plastispheres as hotspots of microbially-driven methylmercury production in paddy soils

Microplastics (MPs) as emerging contaminants have accumulated extensively in agricultural ecosystems and are known to exert important effects on biogeochemical processes. However, how MPs in paddy soils influence the conversion of mercury (Hg) to neurotoxic methylmercury (MeHg) remains poorly understood. Here, we evaluated the effects of MPs on Hg methylation and associated microbial communities in microcosms using two typical paddy soils in China (i.e., yellow and red soils). Results showed that the addition of MPs significantly increased MeHg production in both soils, which could be related to higher Hg methylation potential in the plastisphere than in the bulk soil. We found significant divergences in the community composition of Hg methylators between the plastisphere and the bulk soil. In addition, the plastisphere had higher proportions of Geobacterales in the yellow soil and Methanomicrobia in the red soil compared with the bulk soil, respectively; and plastisphere also had more densely connected microbial groups between non-Hg methylators and Hg methylators. These microbiota in the plastisphere are different from those in the bulk soil, which could partially account for their distinct MeHg production ability. Our findings suggest plastisphere as a unique biotope for MeHg production and provide new insights into the environment risks of MP accumulation in agricultural soils.

Plastisphere microbiome: Methodology, diversity, and functionality

Broad topics of the plastisphere in various environments are reviewed, including its methodologies, diversity, functionality, and outlook.

Atrazine sorption on biodegradable microplastics: Significance of microbial aging

The study of the environmental sorption behavior of typical biodegradable microplastics (BMPs) during biodegradation is essential given the different characteristics of BMPs and conventional microplastics (MPs) and the knowledge gap on the sorption capacity of BMPs for pollutants during degradation. In this study, polylactic acid (PLA) and poly (butylene-adipate-co-terephthalate) (PBAT) were chosen as research objects, and the effects of soil microbial aging on their surface properties and atrazine (ATZ) sorption were investigated. The structural composition of the bacterial community was essentially similar between B-PLA and B-PBAT. Microbial aging action created new pores and cavities in PLA, forming microbial films that led to the agglomeration of PLA particles. The microbial aging action destroyed the amorphous regions of PLA and PBAT, resulting in higher crystallinity, and the ester groups broke to form carboxyl groups. The equilibrium sorption (Q_e) of B-PLA increased by 11.12 % compared with PLA, while the Q_e of B-PBAT decreased by 4.95 % compared to PBAT. These results show that soil microbes change the surface properties of PLA and PBAT, thus affecting the sorption mechanism of ATZ, and provide a theoretical premise for the behavior and ecological risk assessment of ATZ in the presence of BMPs.

The plastisphere of biodegradable and conventional microplastics from residues exhibit distinct microbial structure, network and function in plastic-mulching farmland

The inhomogeneity of plastisphere and soil may result in different microbial communities, thus potentially affecting soil functions. Biodegradable plastics offer an alternative to conventional plastics, nevertheless, the inadequate end-of-life treatment of biodegradable plastics may release more microplastics. Herein, we collected PE and PBAT/PLA microplastics in plastic-mulching farmland in Hebei, China. The bacterial communities of soil, PE and PBAT/PLA plastisphere were investigated using 16 S high-throughput sequencing. We found that the structure of bacterial communities in PBAT/PLA plastisphere were significantly distinct from PE plastisphere and soil. The alpha diversities in PBAT/PLA plastisphere were significantly lower than PE plastisphere and soil. Statistical analysis of differentially ASVs suggested that PBAT/PLA microplastics act as a filter, enriching taxa with the capability to degrade plastic polymers such as Proteobacteria and Actinobacteria. Compared to PE plastisphere, PBAT/PLA plastisphere has networks of less complexity, lower modularity, and more competitive interactions. Predicted metabolic pathways involved in human diseases, carbohydrate metabolism, amino acid metabolism, and xenobiotic biodegradation and metabolism were promoted in PBAT/PLA plastisphere, along with the facilitation in abundance of genes associated with carbon and nitrogen cycling. Our results highlighted the uniqueness of plastisphere of biodegradable microplastics from conventional microplastics and their potential impact on soil functions.

Insights into remediation effects and bacterial diversity of different remediation measures in rare earth mine soil with SO4 2- and heavy metals

The increased demand for rare earth resources has led to an increase in the development of rare earth mines (REMs). However, the production of high-concentration leaching agents (SO₄ ^2-) and heavy metals as a result of rare earth mining has increased, necessitating the removal of contaminants. Here, a series of experiments with different remediation measures, including control (CK), sulfate-reducing bacteria (SRB) alone (M), chemicals (Ca(OH)₂, 1.5 g/kg) plus SRB (CM-L), chemicals (Ca(OH)₂, 3.0 g/kg) plus SRB (CM-M), and chemicals (Ca(OH)₂, 4.5 g/kg) plus SRB (CM-H), were conducted to investigate the removal effect of SO₄ ^2-, Pb, Zn, and Mn from the REM soil. Then, a high-throughput sequencing technology was applied to explore the response of bacterial community diversity and functions with different remediation measures. The results indicated that CM-M treatment had a more efficient removal effect for SO₄ ^2-, Pb, Zn, and Mn than the others, up to 94.6, 88.3, 98.7, and 91%, respectively. Soil bacterial abundance and diversity were significantly affected by treatments with the inoculation of SRB in comparison with CK. The relative abundance of Desulfobacterota with the ability to transform SO₄ ^2- into S^2- increased significantly in all treatments, except for CK. There was a strong correlation between environmental factors (pH, Eh, SO₄ ^2-, Pb, and Zn) and bacterial community structure. Furthermore, functional prediction analysis revealed that the SRB inoculation treatments significantly increased the abundance of sulfate respiration, sulfite respiration, and nitrogen fixation, while decreasing the abundance of manganese oxidation, dark hydrogen oxidation, and denitrification. This provides good evidence for us to understand the difference in removal efficiency, bacterial community structure, and function by different remediation measures that help select a more efficient and sustainable method to remediate contaminants in the REM soil.

Distinct Bacterial and Fungal Communities Colonizing Waste Plastic Films Buried for More Than 20 Years in Four Landfill Sites in Korea

Plastic pollution has been recognized as a serious environmental problem, and microbial degradation of plastics is a potential, environmentally friendly solution to this. Here, we analyzed and compared microbial communities on waste plastic films (WPFs) buried for long periods at four landfill sites with those in nearby soils to identify microbes with the potential to degrade plastics. Fourier-transform infrared spectroscopy spectra of these WPFs showed that most were polyethylene and had signs of oxidation, such as carbon-carbon double bonds, carbon-oxygen single bonds, or hydrogen-oxygen single bonds, but the presence of carbonyl groups was rare. The species richness and diversity of the bacterial and fungal communities on the films were generally lower than those in nearby soils. Principal coordinate analysis of the bacterial and fungal communities showed that their overall structures were determined by their geographical locations; however, the microbial communities on the films were generally different from those in the soils. For the pulled data from the four landfill sites, the relative abundances of Bradyrhizobiaceae, Pseudarthrobacter, Myxococcales, Sphingomonas, and Spartobacteria were higher on films than in soils at the bacterial genus level. At the species level, operational taxonomic units classified as Bradyrhizobiaceae and Pseudarthrobacter in bacteria and Mortierella in fungi were enriched on the films. PICRUSt analysis showed that the predicted functions related to amino acid and carbohydrate metabolism and xenobiotic degradation were more abundant on films than in soils. These results suggest that specific microbial groups were enriched on the WPFs and may be involved in plastic degradation.

Catalytic hydrogenolysis of plastic to liquid hydrocarbons over a nickel-based catalyst

The catalytic hydrogenolysis of a typical model compound of mulching film waste, polyethylene, was investigated as a potential way to improve economic efficiency of mulching film recycling. Nickel-based heterogeneous catalysts are proposed for polyethylene hydrogenolysis to produce liquid hydrocarbons. Among catalysts supported on various carriers, Ni/SiO₂ catalyst shows the highest activity which may due to the interactions between nickel and silica with the formation of nickel phyllosilicate. As high as 81.18% total gasoline and diesel range hydrocarbon was obtained from the polyethylene hydrogenolysis at relatively mild condition of 280 °C, and 3 MPa cold hydrogen pressure. The result is comparable to what have been reported in previous studies using noble metal catalysts. The gasoline and diesel range hydrocarbon are n-alkanes with a distribution at a range of C₄-C₂₂. The gas products are primarily CH₄ along with a small amount of C₂H₆ and C₃H₈. High yield of CH₄ as much as 9.68% was observed for the cleavage of molecule occurs along the alkane chain.

Aging of colloidal contaminants and pathogens in the soil environment: Implications for nanoplastic and COVID-19 risk mitigation

Colloidal contaminants and pathogens are widely distributed in soil, whose tiny sizes and distinct surface properties render unique environmental behaviours. Because of aging, colloids can undergo dramatic changes in their physicochemical properties once in the soil environment, thus leading to diverse or even unpredictable environmental behaviour and fate. Herein, we provide a state-of-art review of colloid aging mechanisms and characteristics and implications for risk mitigation. First, we review aging-induced formation of colloidal contaminants and aging-associated changes. We place a special focus on emerging nanoplastic (NP) contaminants and associated physical, chemical, and biological aging processes in soil environments. Second, we assess aging and survival features of colloidal pathogens, especially viruses. Viruses in soils may survive from several days to months, or even several years in groundwater, depending on their rates of inactivation and the reversibility of attachment. Furthermore, we identify implications for risk mitigation based on aging mechanisms. Hotspots of (photo)chemical aging of NPs, including plastic gauzes at construction sites and randomly discarded plastic waste in rural areas, are identified as area requiring greater research attention. For COVID-19, we suggest taking greater care in regions where viruses are persist for long periods, such as cold climate regions. Soil amendment with quicklime (CaO) may act as an effective means for pathogen disinfection. Future risk mitigation of colloidal contaminants and pathogens relies on a better understanding of aging mechanisms and more sophisticated models accurately depicting processes in real soil environments.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Vertically co-distributed vanadium and microplastics drive distinct microbial community composition and assembly in soil

Vanadium (V) and microplastics in soils draw increasing attention considering their significant threats to ecosystems. However, little is known about the vertical co-distribution of V and microplastics in soil profile and their combined effects on microbial community dynamics and assembly. This study investigated the spatial distribution of V and microplastics in the soils at a V smelting site and the associated microbial community characteristics along the vertical gradient. Both V and microplastics were found in the 50 cm soil profile with average concentrations of 203.5 ± 314.4 mg/kg and 165.1 ± 124.8 item/kg, respectively. Topsoil (0-20 cm) and subsoil (20-50 cm) displayed distinct microbial community compositions. Metal-tolerant (e.g., Spirochaeta, Rubellimicrobium) and organic-degrading (e.g., Bradyrhizobium, Pseudolabrys) taxa as biomarkers were more abundant in the topsoil layer. V and microplastics directly affected the microbial structure in the topsoil and had indirect influences in the subsoil, with direct impacts from organic matter. In topsoil, deterministic processes were more prevalent for community assembly, whereas stochastic processes governed the subsoil. The interspecific relationship was closer in topsoil with greater network complexity and higher modularity. These findings promote the understanding of distinct heterogeneity of microbial communities jointly driven by V and microplastics in soil environment.

Scientometric analysis and scientific trends on microplastics research

In recent years, the environmental pollution of microplastics has attracted much attention. To date, there have been a lot of researches on microplastics and a series of studies published. In this study, by bibliometric analysis method to evaluated the development and evolution on microplastics research trends and hot spots. A total of 2872 literature information was collected from the Web of Science (2004-2020), which was used for bibliometric visual analysis by CiteSpace. It was possible to see the contributing countries, institutions, authors, keywords, and future study directions in the microplastics sectors by looking at the visual representation of the results. (1) Since 2004, scientific advancements in this sector have advanced significantly, with a significant increase in speed since 2012. (2) China and the United States are the world's leading researchers in microplastics. (3) The study of microplastics was multidisciplinary, comprising researchers from the fields of ecology, chemistry, molecular biology, environmental science, and oceanography. (4) In recent years, researchers have concentrated their attention on the distribution and toxicity of microplastics in the environment, as well as their coupled pollution with heavy metal contaminants. In conclusion microplastics study in environmental science has become increasingly popular in recent years. Topics include dispersion, toxicity, and coupled pollution with heavy metal pollutants. Researchers in a wide range of fields are involved in microplastics research. Furthermore, policies and regulations about microplastics in global were summarized, and membrane technology has potential to remove microplastics from water. The above findings help to clearly grasp the content and development trend of microplastics research, point out the future research direction for scholars, and promote microplastics research and pollution prevention and control.