Effect of porphyrin on photocatalytic activity of TiO 2 nanoparticles toward Rhodamine B photodegradation

Development of novel reduced graphene oxide/metalloporphyrin nanocomposite with photocatalytic and antimicrobial activity for potential wastewater treatment and medical applications

This research investigates a novel nanocomposite material composed of reduced graphene oxide (rGO) and nickel-5,15-bisdodecylporphyrin (Ni-BDP) nanoparticles for the effective removal of methyl orange (MO), a harmful synthetic dye, from water. The structure and composition of the synthesized rGO/Ni-BDP nanocomposite were characterized using high-resolution transmission electron microscopy (HR-TEM), Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry, and ultraviolet-visible (UV-Vis) spectroscopy. The study demonstrates the material's efficacy as both a catalyst and adsorbent for MO removal. Optimal performance was observed at pH 3.0, where the positively charged nanocomposite surface facilitated strong interactions with negatively charged MO molecules, leading to enhanced photocatalytic activity. Under these conditions, 0.01 g of the nanocomposite achieved an impressive 86.2% MO removal efficiency. Furthermore, the study explored the reusability of the rGO/Ni-BDP nanocomposite in repeated cycles of photocatalytic MO degradation under visible light irradiation. While exhibiting some decrease in efficiency over five cycles, the nanocomposite maintained a respectable degradation rate even after multiple uses. Finally, the antimicrobial properties of the nanocomposite were evaluated against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria exhibiting a zone of inhibition measuring 23 mm and 26, respectively. The minimum inhibitory concentration (MIC) values of 2.50 µg/ml and 1.25 µg/ml for Escherichia coli and Staphylococcus aureus, respectively. The results revealed significant antibacterial activity, demonstrating the broad-spectrum efficacy of the rGO/Ni-BDP nanocomposite. This research underscores the potential of the rGO/Ni-BDP nanocomposite as a versatile material for environmental remediation and antibacterial applications.

Effect of Thiophene-Hydrazinyl-Thiazole derivative as an efficient dye sensitizer and performance enhancer of TiO2 toward rhodamine B photodegradation

Visible-light-driven photocatalysis is an eco-friendly technology for wastewater treatment, where TiO2-based photocatalysts displayed outstanding performance in this regard. Dye sensitization is a promising approach for overcoming the common drawbacks of TiO2via improving its photocatalytic performance and extending its activity to visible light. Herein, we demonstrate the synthesis of the Thiophene-Hydrazinyl-Thiazole (THT) derivative as a novel organic dye sensitizer to be employed as a visible-light antenna for TiO2 nanoparticles. The physicochemical characteristics of the as-synthesized TiO2-based nanoparticles are examined by different techniques, which revealed the successful fabrication of the proposed THT-TiO2 heterojunction. The incorporation of THT molecules on the TiO2 surface led to slight disorders and deformation in the crystal lattice of TiO2, a remarkable improvement of its absorption in the visible light as a perfect visible-light antenna in the whole visible region, and significant enhancement in the charge transfer. Rhodamine B (RhB) is used as an organic dye model to assess the photocatalytic efficiency of the as-fabricated THT-TiO2 photocatalyst which achieved almost complete degradation (>95% in 150 min) with an observed rate constant (kobs) of 0.0164 min-1; total organic carbon (TOC) measurements suggested ∼75% mineralization. THT-TiO2 achieved 2.1-fold enhancement in photodegradation% and 4.1-fold enhancement in kobs compared to the bare TiO2. THT showed good activity under visible-light irradiation (RhB degradation% was >66% in 150 min and kobs = 0.0085 min-1). The influence of the initial pH of the solution was investigated and pH 4 was the optimum pH value for suitable interaction between RhB and the surface of THT-TiO2. Radical quenching experiments were conducted to assess the crucial reactive species where the ∙OH and O2.- were the most reactive species. THT-TiO2 showed promising stability over three successive cycles. Finally, the improvement mechanism of the photocatalytic activity of THT-TiO2 was attributed to the electron injection from the excited THT (the dye sensitizer) to TiO2 and enhanced charge separation.

A novel layered double hydroxide-based ternary nanocomposite for the effective photocatalytic degradation of rhodamine B

Photocatalytic degradation of organic pollutants is a green and effective route of wastewater treatment. Zinc oxide was initially used for this purpose; however, calcined zinc/chromium layered double hydroxide (ZnCr-LDO) and cadmium sulfide quantum dots (CdSQDs)-based nanocomposites proved as superior alternatives. Herein, we report a green sonochemical method for the sol-gel fabrication of novel CdSQDs@ZnCr-LDO/ZnO ternary nanocomposite that exhibited exceptional photocatalytic activity for the degradation of rhodamine B dye (RhB), in wastewaters, under UV-A-irradiation. The features of the ternary nanocomposite were investigated using various physicochemical techniques, including XRD, SEM, TEM, EDX, XPS, BET, zeta potential, DRS, and PL measurements. The RhB dye % removal was 38.02, 40.2, and 98% using pristine ZnO, ZnCr-LDO and the ternary CdSQDs@ZnCr-LDO/ZnO-based nanomaterials, respectively, reflecting the superior ternary nanocomposite's photocatalytic activity that made it an excellent competitor to commonly reported photocatalysts. Additionally, an investigation was carried out to determine the key reactive species in the photocatalytic degradation of RhB, considering both scavenger's type and concentration. The prevailing mechanism was found to be the reductive photodegradation pathway. Furthermore, several models were utilized to describe the kinetics of photocatalytic performance of the ternary nanocomposite and a typical Z-scheme type-II photocatalytic heterojunction mechanism was inferred.

Nickel-doped magnetic carbon aerogel derived from xanthan gum: a competent catalyst for the degradation of single and binary dye-based water pollutants

Toxic organic dyes (colorants) are one of the main causes of water pollution that releases destructive effluents in the environment. To overcome this issue, a fundamental need to produce a novel, efficient catalyst for the degradation and mineralization of dye mixtures has arisen. The objective of this research is to develop an eminent Ni-doped magnetic carbon aerogel (Ni-MCA) catalyst using graft co-polymerization method having xanthan gum as backbone doped with Ni-magnetic nanoparticles (Ni-MNPs), that do not show agglomeration and easy to separate. The examination revealed that Ni-MCA provided exceptional magnetic characteristics (Ms = 52.75 emu/g) and potent catalytic activity for the degradation of mono- as well as binary-dye solutions of Congo red (CR) and methyl green (MG) dyes. The formation was verified by various characterization techniques such as FTIR, VSM, XRD, XPS, SEM, TEM, and EDX mapping. Interestingly, Ni-MCA shows faster result on anionic dye CR up to 97% with degradation rate of 5.647 × 10-1 min-1, and MG dye shows degradation of 95.7% with the degradation rate of 2.169 × 10-1 min-1, while dye mixture is showing 90% degradation with rate of 2.159 × 10-1 min-1.

A critical review on the recent trends of photocatalytic, antibacterial, antioxidant and nanohybrid applications of anatase and rutile TiO2 nanoparticles

Titanium dioxide nanoparticles (TiO2 NPs) have become a focal point of research due to their widespread daily use and diverse synthesis methods, including physical, chemical, and environmentally sustainable approaches. These nanoparticles possess unique attributes such as size, shape, and surface functionality, making them particularly intriguing for applications in the biomedical field. The continuous exploration of TiO2 NPs is driven by the quest to enhance their multifunctionality, aiming to create next-generation products with superior performance. Recent research efforts have specifically focused on understanding the anatase and rutile phases of TiO2 NPs and evaluating their potential in various domains, including photocatalytic processes, antibacterial properties, antioxidant effects, and nanohybrid applications. The hypothesis guiding this research is that by exploring different synthesis methods, particularly chemical and environmentally friendly approaches, and incorporating doping and co-doping techniques, the properties of TiO2 NPs can be significantly improved for diverse applications. The study employs a comprehensive approach, investigating the effects of nanoparticle size, shape, dose, and exposure time on performance. The synthesis methods considered encompass both conventional chemical processes and environmentally friendly alternatives, with a focus on how doping and co-doping can enhance the properties of TiO2 NPs. The research unveils valuable insights into the distinct phases of TiO2 NPs and their potential across various applications. It sheds light on the improved properties achieved through doping and co-doping, showcasing advancements in photocatalytic processes, antibacterial efficacy, antioxidant capabilities, and nanohybrid applications. The study concludes by emphasizing regulatory aspects and offering suggestions for product enhancement. It provides recommendations for the reliable application of TiO2 NPs, addressing a comprehensive spectrum of critical aspects in TiO2 NP research and application. Overall, this research contributes to the evolving landscape of TiO2 NP utilization, offering valuable insights for the development of innovative and high-performance products.

Ba3(PO4)2 Photocatalyst for Efficient Photocatalytic Application

Barium phosphate (Ba3(PO4)2) is a class of material that has attracted significant attention thanks to its chemical stability and versatility. However, the use of Ba3(PO4)2 as a photocatalyst is scarcely reported, and its use as a photocatalyst has yet to be reported. Herein, Ba3(PO4)2 nanoflakes synthesis is optimized using sol-gel and hydrothermal methods. The as-prepared Ba3(PO4)2 powders are investigated using physicochemical characterizations, including XRD, SEM, EDX, FTIR, DRS, J-t, LSV, Mott-Schottky, and EIS. In addition, DFT calculations are performed to investigate the band structure. The oxidation capability of the photocatalysts is investigated depending on the synthesis method using rhodamine B (RhB) as a pollutant model. Both Ba3(PO4)2 samples prepared by the sol-gel and hydrothermal methods display high RhB photodegradation of 79% and 68%, respectively. The Ba3(PO4)2 obtained using the sol-gel process exhibits much higher stability under light excitation after four regeneration cycles. The photocatalytic oxidation mechanism is proposed based on the active species trapping experiments where O2 •‒ is the most reactive species. The finding shows the promising potential of Ba3(PO4)2 photocatalysts and opens the door for further investigation and application in various photocatalytic applications.

Fast photocatalytic degradation of rhodamine B using indium-porphyrin based cationic MOF under visible light irradiation

A broad light-harvesting range and efficient charge separation are two main ways to enhance the visible photocatalytic performance of semiconductors. Herein, an ionic porphyrin MOF [In(TPyP)]·(NO3) (1) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)-21H,23H-porphyrin) was synthesized via in situ metalation. The orderly arranged porphyrin photosensitizer and the internal electric field between the MOF host and NO3- guests enable effective visible light response and electron-hole separation. Consequently, the as-synthesized MOF shows efficient photocatalytic degradation of rhodamine B (RhB), methyl orange (MO) and methylene blue (MB) organic pollutants. It can degrade 99.07% of RhB within only 20 minutes under visible light irradiation (λ > 420 nm) with a high chemical reaction rate constant of 0.2400 min-1. The photocatalytic activity of the title MOF is more efficient than those of other reported MOFs, COFs and even inorganic semiconductors. The reusability, energy level, band gap, charge distribution and main degradation mechanisms of the photocatalyst were well studied.

Photosensitization of TiO2 microspheres by novel Quinazoline-derivative as visible-light-harvesting antenna for enhanced Rhodamine B photodegradation

Water pollution is one of the global threats severely affecting our planet and human health. Organic textile dyes are one of the common organic water pollutants that are presentient to degradation by traditional physical methods. Semiconductor-assisted photocatalysis is considered a green, efficient, and sustainable technology for wastewater treatment. To maximize the efficient utilization of solar radiation, it is of pivotal significance to explore novel organic molecules to be employed as efficient dye sensitizers for wide-bandgap semiconductors to extend their performance to the Visible-light region. Hence, in this work, we are proposing the design and synthesis of novel structures of QAD molecule as a dye photosensitizer with extended visible light absorptivity due to the extended π-π/n-π conjugations, to promote the performance of TiO2 nanoparticles to the visible-light region and enhance the charge separation. The physicochemical characterizations confirmed the successful synthesis of QAD, TiO2, and QAD/TiO2 samples with the proposed structures. The anchoring of QAD molecules on the surface of TiO2 caused a substantial improvement in the optical characteristics of TiO2 as well as overcoming its common drawbacks by decreasing its bandgap energy to 2.6 eV, a remarkable reduction of PL intensity indicating reducing the e-h recombination and enhancing the charge separation, and creation of efficient visible light-harvesting antenna in the range of 400-600 nm. Besides, the QAD/TiO2 sample achieved a 3-fold enhancement in the observed rate constant of the photodegradation of Rhodamine B dye compared to the bare TiO2. The parameters affecting the photodegradation process were optimized and the sample displayed outstanding stability after 4 consecutive cycles. Finally, the effect of the scavengers was investigated and [Formula: see text] was proposed to be the most reactive species and the mechanism of the enhancement was suggested based on the electron injection from the QAD's HOMO level to the TiO2's CB. Finally, this work opens the door for various studies for the investigation of the proposed structures or similar structures in various photocatalytic/biomedical applications.

ZnO/Graphene Oxide on Halloysite Nanotubes as a Superabsorbent Nanocomposite Photocatalyst for the Degradation of Organic Dyes

Using renewable photocatalysts for pollutant degradation represents a promising approach to addressing environmental water challenges by harnessing solar energy without additional energy consumption. However, for the practical use of photocatalysts, it is necessary to improve catalyst efficiency, considering cost and biocompatibility. In this study, we developed a new superabsorbent photocatalyst for the degradation of organic dyes in water. Our photocatalyst comprises halloysite nanotubes (HNTs) with a large outer diameter and Si-O and Al-O groups on the outer and inner surfaces, respectively; graphene oxide (GO) possessing numerous sp2 bonds and light-conductive properties; and ZnO, which can degrade organic molecules via a photon source. By exploiting the superabsorbent properties of GOs for organic dyes and stabilizing ZnO nanoparticles on HNTs to inhibit aggregation, our photocatalysts demonstrated significantly improved degradability compared to ZnO nanoparticles alone and combinations of ZnO with HNTs or GO. The structural characteristics of the nanocomposites were characterized using SEM, EDX, Raman spectroscopy, and XRD. Their enhanced photocatalytic activity was demonstrated by the degradation of rhodamine b in water, showing 95% photodegradation under UV illumination for 60 min, while the ZnO nanoparticles showed only 56% dye degradation under the same condition. Additionally, the degradation rate was enhanced by four times. Furthermore, the catalysts maintained their initial activity with no significant loss after four uses, showing their potential for practical implementation in the mass purification of wastewater.

Cocatalyst loaded Al-SrTiO3 cubes for Congo red dye photo-degradation under wide range of light

The continued pollution, waste, and unequal distribution of the limited amount of fresh water on earth are pushing the world into water scarcity crisis. Consequently, development of revolutionary, cost-effective, and efficient techniques for water purification is essential. Herein, molten flux method was used for the preparation of micro-sized Al-doped SrTiO₃ photocatalyst loaded with RhCr₂O₃ and CoOOH cocatalysts via simple impregnation method for the photo-assisted degradation of Congo red dye under UV and visible irradiation compared with P25 standard photocatalyst. In addition, photoelectrochemical analysis was conducted to reveal the separation and transfer efficiency of the photogenerated e^-/h⁺ pairs playing the key role in photocatalysis. SEM and TEM analyses revealed that both P25 and the pristine SrTiO₃ have spherical shapes, while Al-doped SrTiO₃ and the sample loaded with cocatalysts have cubic shapes with a relatively higher particle size reaching 145 nm. In addition, the lowest bandgap is due to Al⁺³ ion doping and excessive surface oxygen vacancies, as confirmed by both UV-Vis diffuse-reflectance and XPS analyses. The loading of the cocatalysts resulted in a change in the bandgap from n-type (pristine SrTiO₃ and Al-SrTiO₃) into p-type (cocatalyst loaded sample) as exhibited by Mott-Schottky plots. Besides, the cocatalyst-loaded sample exhibited good performance stability after 5 cycles of the photocatalytic removal of Congo red dye. OH^· radical was the primary species responsible for CR degradation as confirmed by experiments with radical scavengers. The observed performance of the prepared samples under both UV and visible light could foster the ongoing efforts towards more efficient photocatalysts for water purification.

In situ recombination for durable photoelectrocatalytic degradation of organic dye in wastewater

Photoelectrocatalysis (PEC) can effectively degrade organic pollutants by using photoelectrodes without secondary pollution. However, significant mass transport resistance and decreased catalytic activity caused by the shedding of active components remain a barrier to achieving the photocatalytic system with a high degradation rate and long-term durability. Here, an in situ recombination concept is presented to overcome this challenge. The bionic coral-like electrode, obtained by in situ assembly of UIO-66 around TiO₂ nanoflowers (TNF) on Ti-foam substrate, is employed as the photoanode in PEC. Ex situ evaluation of photoelectrochemical activity demonstrates that the UIO-66@TNF/Ti-foam (U@T/T) design significantly improves the light-propagation, light-absorption and charge transfer. In Situ degradation evaluations also shows that the interesting design promotes rapid and stable degradation of organic dye (e.g. Rhodamine B (RhB)). At 2.0 V of bias potential and pH 7.0 in 5 mg L^-1 RhB, under the action of active species such as ·O₂^- and ·OH (proved by the degradation mechanism experiments), the removal rate of RhB can reach 96.1% at 120 min and almost complete removal at 200 min (99.1%).

Spectroscopic Investigations of Porphyrin-TiO2 Nanoparticles Complexes

This study presents the spectral characterization of TiO₂ nanoparticles (NPs) functionalized with three porphyrin derivatives: 5,10,15,20-(Tetra-4-aminophenyl) porphyrin (TAPP), 5,10,15,20-(Tetra-4-methoxyphenyl) porphyrin (TMPP), and 5,10,15,20-(Tetra-4-carboxyphenyl) porphyrin (TCPP). UV-Vis absorption and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) spectroscopic studies of these porphyrins and their complexes with TiO₂ NPs were performed. In addition, the efficiency of singlet oxygen generation, the key species in photodynamic therapy, was investigated. UV-Vis absorption spectra of the NPs complexes showed the characteristic bands of porphyrins. These allowed us to determine the loaded porphyrins on TiO₂ NPs functionalized with porphyrins. FTIR-ATR revealed the formation of porphyrin-TiO₂ complexes, suggesting that porphyrin adsorption on TiO₂ may involve the pyrroles in the porphyrin ring, or the radicals of the porphyrin derivative. The quantum yield for singlet oxygen generation by the studied porphyrin complexes with TiO₂ was higher compared to bare porphyrins for TAPP and TMPP, while for the TCPP-TiO₂ NPs complex, a decrease was observed, but still maintained a good efficiency. The TiO₂ NPs conjugates can be promising candidates to be tested in photodynamic therapy in vitro assays.

Photocatalytic evaluation and characterization of TiO2-riboflavin phosphate film: analysis of reactive oxygen species

The effect of Riboflavin-5'-phosphate (RFPO₄) sensitization on photocatalytic properties of TiO₂ film was studied. RFPO₄ was adsorbed on film surface to investigate the photophysical properties of TiO₂ upon blue-light photoexcitation. The film was characterized through scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, and diffuse reflectance spectroscopy. The efficiency of the TiO₂/RFPO₄ film was tested for pollutant elimination in aqueous media in a visible-light-driven system. The phenol paradigmatic model was employed in an aqueous solution as a contaminant target. TiO₂/RFPO₄ sensitized photodegradation of phenol, which produces catechol, hydroquinone, and benzophenone, was monitored by absorption spectroscopy and HPLC. The results indicated that phenol degradation with TiO₂/RFPO₄ film was due to the photogeneration of two reactive oxygen species, singlet molecular oxygen (O₂(¹Δ_g)) and superoxide radical anion (O₂^·-) identified through specific detection techniques. The presence of O₂(¹Δ_g) is reported here for the first time as generated from a sensitized TiO₂ film upon visible-light photoirradiation. Based on the photophysical determinations, a photocatalytic mechanism for TiO₂/RFPO₄ was established.

Preparation and modification methods of defective titanium dioxide-based nanoparticles for photocatalytic wastewater treatment-a comprehensive review

The rapid population growth and industrial expansion worldwide have created serious water contamination concerns. To curb the pollution issue, it has become imperative to use a versatile material for the treatment. Titanium dioxide (TiO₂) has been recognized as the most-studied nanoparticle in various fields of science and engineering due to its availability, low cost, efficiency, and other fascinating properties with a wide range of applications in modern technology. Recent studies revealed the photocatalytic activity of the material for the treatment of industrial effluents to promote environmental sustainability. With the wide band gap energy of 3.2 eV, TiO₂ can be activated under UV light; thus, many strategies have been proposed to extend its photoabsorption to the visible light region. In what follows, this has generated increasing attention to study its characteristics and structural modifications in different forms for photocatalytic applications. The present review provides an insight into the understanding of the synthesis methods of TiO₂, the current progress in the treatment techniques for the degradation of wide environmental pollutants employing modified TiO₂ nanoparticles, and the factors affecting its photocatalytic activities. Further, recent developments in using titania for practical applications, the approach for designing novel nanomaterials, and the prospects and opportunities in this exciting area have been discussed.

Characterization Methodology and Activity Evaluation of Solar-Driven Catalysts for Environmental Remediation

Solar-driven photocatalysis mediated by semiconductors has been rapidly developed as a green and sustainable technology for environmental remediation. Continuous efforts have been devoted to novel semiconducting photocatalysts to boost the efficiency of the photocatalytic system. However, controversy has widely existed in materials characterization and photocatalytic activity evaluation. This review overviews the recent advances in characterization methodology and photocatalytic activity evaluation of solar-driven catalysts (SDCs) for environmental remediation. After a general and brief introduction of different SDCs, the compositional, structural, and optical characterizations of SDCs are summarized. Moreover, the characterization methods and challenges in the doped and coupled SDCs are discussed. Finally, the challenges in the evaluation of current evaluation methods for the photocatalytic activity of SDCs are highlighted.

Sustainable Solar Light Photodegradation of Diclofenac by Nano- and Micro-Sized SrTiO3

Currently, photocatalytic reactions under solar illumination have attracted worldwide attention due to the tremendous set of associated environmental problems. Taking sunlight into account, it is indispensable to develop highly effective photocatalysts. Strontium titanate, SrTiO3 (STO), is a cubic perovskite-type semiconductor, an inexpensive material with high thermal stability and corrosion resistance that exhibits a similar energy bandgap to TiO2 and can represent an interesting alternative in photocatalytic applications. Particle size can significantly affect both photocatalytic and photoelectrochemical properties of a photocatalyst, thus altering the photooxidation of organic pollutants in air or water. In this context, this research aims at investigating the photocatalytic features of nano- and micro-sized commercial STO powders towards the photodegradation of diclofenac (DFC), a non-steroidal, anti-inflammatory drug, widely used as analgesic, antiarthritic, and antirheumatic. Both nano- and micro-STO photocatalysts exhibited remarkable photocatalytic efficiency towards DCF, reaching photodegradation efficiency higher than 90% within one hour. Results obtained in simulated drinking water were also compared to those obtained in ultrapure water. Both STOs showed good stability during recycling tests, maintaining high performances after three cycles. Eventually, active species were identified using various scavengers by trapping holes and radicals generated during the photocatalytic degradation process.

Synthesis and characterization of nanozeolite from (agro)industrial waste for application in heterogeneous photocatalysis

The pollution of wastewater with dyes has become a serious environmental problem around the world. In this context, the work aims to synthesize and characterize a supported nanocatalyst (NZ-180) from rice husk (RH) and alum sludge (AS) incorporating silver (AgNPs@NZ-180) and titanium nanoparticles (TiNPs@NZ-180) for Rhodamine B (RhB) dye degradation, under UV and visible irradiation. Central rotatable composite design (CRCD) was used to determine ideal conditions, using nanocatalyst and dye concentration such as input variables and degradation percentage like response variable. Samples were characterized by XRD, SEM-EDS, N₂ porosimetry, DLS, and zeta potential analyses. TiNPs@NZ-180 showed the best photocatalytic activity (62.62 and 50.82% under UV and visible irradiation, respectively). Specific surface area has increased from 35.90 to 418.90 m² g^-1 for NZ-180 and TiNPs@NZ-180, respectively. Photocatalytic performance of TiNPs@NZ-180 has reduced to 8 and 10% after 5 cycles under UV and visible light irradiation. Ideal conditions found by CRCD were 2.75 g L^-1 and 20 mg L^-1 for nanocatalyst and RhB concentrations, respectively. Therefore, (agro)industrial waste present such an alternative material for application in the removal of wastewater with dyes, which helps in the reduction of the impact of chemicals/pollutants on human and animal health.

Solvent/metal-free benzimidazolium-based carboxyl-functionalized porphyrin photocatalysts for the room-temperature alkylation of amines under the irradiation of visible light

The improvement of novel sustainable catalytic methods for green chemical production is an emergent area in chemical science.

Novel Z-Scheme/Type-II CdS@ZnO/g-C3N4 ternary nanocomposites for the durable photodegradation of organics: Kinetic and mechanistic insights

Visible-light-driven photocatalysis is a green and efficient strategy for wastewater treatment, where graphitic carbon nitride-based semiconductors showed excellent performance in this regard. Consequently, we report on the development of a green and facile one-pot room-temperature ultrasonic route for the preparation of novel ternary nanocomposite of cadmium sulfide quantum dots (CdS QDs), zinc oxide nanoparticles (ZnO NPs), and graphitic carbon nitride nanosheets (g-C₃N₄ NSs). The proposed materials had been characterized by several physicochemical techniques such as PXRD, XPS, FE-SEM, HR-TEM, PL, and DRS. The photocatalytic efficiency of the proposed photocatalysts was assessed towards the photodegradation of Rhodamine B dye as a water pollutant model using spectrophotometric measurements. The as-synthesized novel ternary nanocomposite (CdS@ZnO/g-C₃N₄) exhibited perfect photocatalytic activity, where almost complete degradation was achieved in only 2 h under UV-irradiation or 3 h under visible-irradiation. Various methods were used to elucidate the kinetics of the photocatalytic process. Moreover, CdS@ZnO/g-C₃N₄ exhibited a unique synergetic performance when compared to the corresponding binary composites or the individual components. This synergetic performance could be ascribed to the perfect electronic band configuration of the three components, leading to the establishment of several combined synergetic Z-Scheme/Type-II photocatalytic heterojunctions, which is the proposed mechanism for the observed synergetic photocatalytic reactivity of the as-synthesized CdS@ZnO/g-C₃N₄ nanocomposite when compared to the single and binary nanocomposite counterparts. Furthermore, the effects of both the type and concentration of various scavengers on the photocatalytic activity were assessed to investigate the most reactive species, where the reductive degradation pathway was found to be the predominant route. Finally, the photocatalytic efficiency of the as-synthesized CdS@ZnO/g-C₃N₄ composite showed promising and competing results when compared to other photocatalysts reported in the literature.

Tetracationic porphyrin derivatives against human breast cancer

Photodynamic therapy (PDT) is an approved therapeutic approach and an alternative to conventional chemotherapy for the treatment of several types of cancer with the advantages of reducing the side effects and developing resistance mechanisms. Here, was evaluated the photosensitization capabilities of 5,10,15,20-tetrakis[4-(pyridinium-1-yl-methyl)phenyl]porphyrin (3), its N-confused isomer (4) and of the neutral precursors (1) and (2) and the results were compared with the ones obtained with the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP). Both regular porphyrin derivatives 1 and 3 showed higher efficiency to generate singlet oxygen than TMPyP. The PDT assays towards MCF-7 cells under red light irradiation (λ > 640 nm, 23.7 mW cm^-2) demonstrated that the cationic porphyrin 3 is an efficient photosensitizer to kill MCF-7 breast cancer cells. The study of the cell death mechanisms induced by the photodynamic process showed that the studied porphyrin 3 and TMPyP caused cell death by autophagic flux and necrosis.

Nanocomposite matrix conjugated with carbon nanomaterials for photocatalytic wastewater treatment

The problem of hazardous wastewater remediation is a complicated issue and a global challenge. Herein, a layered Co_0.5Ni_0.5Fe₂O₄/SiO₂/TiO₂ composite matrix was prepared and incorporated with three carbon nanomaterials having different dimensionalities, carbon dots (C-dots, 0D), single-walled carbon nanotubes (1D), and reduced graphene oxide (2D), in an effort to create effective photocatalytic nanocomposites for chloramine-T removal from water. Microstructural analyses confirmed the formation of nanocomposites and revealed their chemistry and structure. Elemental mapping revealed a uniform distribution of elements throughout the nanocomposite matrix that was free of impurities. The spherical shape of the matrix particles (average diameter ~90 nm) and their conjugation with the carbon nanomaterials were confirmed. Nitrogen adsorption-desorption isotherms revealed that the nanocomposites were mesoporous but also contained macropores. The surface chemical compositions of the nanocomposites were investigated and showed a range of available binding energies. The kinetics of photocatalysis by the system were studied, and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) on the efficiency of chloramine-T degradation were also investigated. The nanocomposite loaded with 10% C-dots exhibited high UV-assisted photocatalytic activity for chloramine-T degradation (65% removal efficiency).

Porphyrin-based MOFs as heterogeneous photocatalysts for the eradication of organic pollutants and toxins

Water and air pollution are among the major environmental challenges of this era. Waste management, economic sustainable development and renewable energy are unavoidable concomitant considerations. Over the past five years, nanosized metal-organic frameworks (nano-MOFs) have been developed for the elimination of pollutants in wet media and air-born toxins using the highly efficient reactive oxygen species (ROS) of type I (H2O2, •OH, O[Formula: see text] and of type II (1O[Formula: see text]. The ROS are catalytically and efficiently generated through photosensitization, and porphyrins and metalloporphyrins are pigments of choice for this purpose. This short review summarizes the fundamentals of ROS generation by porphyrin-based nano-MOFs (mainly through the formation of ROS type II) and their composites (leading to ROS type I), which includes energy and electron transfer processes, and their applications in these environmental issues.

Comparison of the toxicity of waters containing initially sulfaquinoxaline after photocatalytic treatment by TiO2 and polyaniline/TiO2

This paper addresses the residual toxicity of waters after photocatalysis treatments. The initial waters contain 7 mg L^-1 of sulfaquinoxaline (SQX) which is a sulfonamide antibiotic generally recorded inside the water. The contaminated waters are treated by photocatalytic degradation process with bare titania and titania covered with polyaniline (PANI) conducting polymer. The degradation of SQX is conducted at different pH in order to find the optimal condition to obtain SQX concentration relatively equal to zero in the shortest amount of time. This occurs for PANI/TiO₂ at pH 12 and TiO₂ at pH 4. Toxicity assays (concentration of biomass, pigmentation tests, and cells counting) are undertaken on the microalgae Chlorella vulgaris in order to evaluate the residual toxicity of the 2 treated waters. The toxicity results highlight that the water treated by PANI/TiO₂ at pH 12 is the less toxic towards the algae cells. The water processed by bare titania at acidic pH displays unneglectable toxicity towards the algae cells which are larger than the toxicity of the original SQX solution.

Porphyrin metalation catalyzed by DNAzymes and nanozymes

In this review, DNA and nanomaterial based catalysts for porphyrin metalation reactions are summarized, including the selection of DNAzymes, choice of nanomaterials, their catalytic mechanisms, and applications of the reactions.

Porphyrin functionalized bismuth ferrite for enhanced solar light photocatalysis

In this work, multiferroic bismuth ferrite (BFO) was functionalized with meso-tetraphenylporphine-4,4',4'',4'''-tetracarboxylic acid (TCPP). This new hybrid organic-inorganic material shows an enhanced photocatalytic activity for the degradation of organic dyes as it combines the properties of BFO which is an efficient visible light photocatalyst with peculiar porphyrin absorption in visible light. The anchoring of TCPP to the OH-terminations of the BFO surface through its carboxylic tethering groups was demonstrated using X-ray photoelectron spectroscopy and FT-IR spectroscopy. The photocatalytic activity of the material was also demonstrated through the photocatalytic degradation of Methylene Blue (MB) and Rhodamine-B (Rhd-B) in water under simulated solar light illumination. The TCPP molecules anchored to BFO slightly decrease (∼0.06 eV) the bandgap energy of the system and act as new catalytic centres, thus improving its photocatalytic activity. A photodegradation mechanism was also proposed. This new material is reusable and stable, as it maintains an unmodified photo-activity after several MB discoloration runs.

Photosensitive Hybrid Nanostructured Materials: The Big Challenges for Sunlight Capture

Solar radiation is becoming increasingly appreciated because of its influence on living matter and the feasibility of its application for a variety of purposes. It is an available and everlasting natural source of energy, rapidly gaining ground as a supplement and alternative to the nonrenewable energy feedstock. Actually, an increasing interest is involved in the development of efficient materials as the core of photocatalytic and photothermal processes, allowing solar energy harvesting and conversion for many technological applications, including hydrogen production, CO2 reduction, pollutants degradation, as well as organic syntheses. Particularly, photosensitive nanostructured hybrid materials synthesized coupling inorganic semiconductors with organic compounds, and polymers or carbon-based materials are attracting ever-growing research attention since their peculiar properties overcome several limitations of photocatalytic semiconductors through different approaches, including dye or charge transfer complex sensitization and heterostructures formation. The aim of this review was to describe the most promising recent advances in the field of hybrid nanostructured materials for sunlight capture and solar energy exploitation by photocatalytic processes. Beside diverse materials based on metal oxide semiconductors, emerging photoactive systems, such as metal-organic frameworks (MOFs) and hybrid perovskites, were discussed. Finally, future research opportunities and challenges associated with the design and development of highly efficient and cost-effective photosensitive nanomaterials for technological claims were outlined.

Novel TiO2/GO/CuFe2O4 nanocomposite: a magnetic, reusable and visible-light-driven photocatalyst for efficient photocatalytic removal of chlorinated pesticides from wastewater

A TiO₂/GO/CuFe₂O₄ heterostructure photocatalyst is fabricated by a simple and low-cost ball-milling pathway for enhancing the photocatalytic degradation of chlorinated pesticides under UV light irradiation. Based on the advantages of graphene oxide, TiO₂, and CuFe₂O₄, the nanocomposite exhibited visible light absorption, magnetic properties, and adsorption capacity. Integrated analyses using XRD, SEM, TEM, and UV-visible techniques demonstrated that the nanocomposite exhibited a well-defined crystalline phase, sizes of 10–15 nm, and evincing a visible light absorption feature with an optical bandgap energy of 2.4 eV. The photocatalytic degradations of 17 different chlorinated pesticides (persistent organic pollutants) were assayed using the prepared photocatalyst. The photocatalytic activity of the nanocomposite generated almost 96.5% photocatalytic removal efficiency of typical pesticide DDE from water under UV irradiation. The superior photocatalytic performance was exhibited by the TiO₂/GO/CuFeO₄ catalyst owing to its high adsorption performance and separation efficiency of photo-generated carriers. The photocatalyst was examined in 5 cycles for treating uncolored pesticides with purposeful separation using an external magnetic field.

A TiO₂/GO/CuFe₂O₄ heterostructure photocatalyst is fabricated by a simple and low cost ball milling pathway for enhancing the photocatalytic degradation of chlorinated pesticides under UV light irradiation.

Photocatalytic degradation of cyclophosphamide and ifosfamide: Effects of wastewater matrix, transformation products and in silico toxicity prediction

Antineoplastic drugs have been identified in surface water and effluents from wastewater treatment and, once in the environment, may be harmful to aquatic organisms, as these compounds are possibly mutagenic, genotoxic, cytotoxic, carcinogenic and teratogenic. This work investigated the photodegradation of cyclophosphamide (CP) and ifosfamide (IF) using ruthenium doped titanate nanowires (Ru-TNW) in distilled water (DW) and in wastewater (WW) from secondary wastewater treatment, under UV-Vis radiation. The results indicated that Ru-TNW showed photocatalytic activity for the two cytotoxic drugs with the half-life (t_1/2) of 15.1 min for CP and 12.9 min for IF in WW. Four CP transformation products (TPs) and six IF TPs from the photodegradation process are here reported. These TPs were elucidated by high-resolution mass spectrometry. For both pollutants, the results showed different time profiles for the TPs when WW and DW were used as matrix. Overall, in the WW there was a higher production of TPs and two of them were detected only in this matrix. In other words, environmental matrices may produce different TPs. Degradation pathways were proposed and both drugs bear similarities. Additionally, in silico toxicity were performed by quantitative structure-activity relationship models. The predictions indicated that the TPs, with the exception of one IF TP, presented high mutagenic potential.

Robust photoactive nanoadsorbents with antibacterial activity for the removal of dyes

ZnO nanostructures (NS)/guar gum (GG) nanocomposites have been successfully synthesized and tested as sorbents for photodegradation, adsorption and antimicrobial activity for dye removal. The addition of ZnO improves the thermal stability of GG based on the ratio of the oxygen in the OH form and the total oxygen in the samples as indicated via XPS and FTIR analyses. Among all tested composites, the ZnO NPs/GG nanocomposite showed the highest photocatalytic activity and hence used in extended adsorption and degradation studies against the anionic dye reactive red (RR195) and the cationic dye Rhodamine B (RhB). The adsorption mechanism and kinetics were studied in details. The ZnO NPs/GG nanocomposite showed quite high removal efficiency for both dyes reaching about 96 degradation percent of the initial dye concentration as well as a high adsorption capacity reaching 70 mg g^-1. The adsorption of both dyes on ZnO NPs/GG was found to obey the Freundlich adsorption model with pseudo-second-order kinetics. The antibacterial assay showed an enhanced antibacterial effect of ZnO/GG against E-Coli/TOP10 (PTA 10989) strain compared to pristine ZnO or pure guar gum. The obtained results were proved to be of high significance based on the statistical analysis using one-way ANOVA followed by Tukey's analysis.