Diclofenac in the marine environment: A review of its occurrence and effects

Potassium permanganate-modified eggshell biosorbent for the removal of diclofenac from liquid environment: adsorption performance, isotherm, kinetic, and thermodynamic analyses

This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration. The best parameters to obtained 95.64% DCF removal from liquid environment were 0.05 g MEB weight, 50 mg/L initial concentration, and 60 min contact time at room temperature. The maximum DCF sequestration capacity was found to be 159.57 mg/g with 0.05 g of MEB at 298 K. The adsorption isotherm data were more accurately predicted by the Freundlich model, indicating a process of heterogeneous multilayer adsorption. The results of the kinetic study indicated that the pseudo-second-order kinetic models best matched the experimental data. The findings revealed that the dynamic of DCF entrapment is largely chemisorption and diffusion controlled. Based on the values of thermodynamic parameters, the process is both spontaneous and endothermic. The primary processes of DCF sorption mechanism onto the MEB were chemical surface complexation, hydrogen bonding, π-π stacking, and electrostatic interactions. The produced MEB showed effective DCF separation from the aqueous solution and continued to have maximal adsorption capability even after five regeneration cycles. These findings suggest that MEB could be highly efficient adsorbent for the removal of DCF from pharmaceutical wastewater.

Electrochemical degradation of diclofenac generates unexpected thyroidogenic transformation products: Implications for environmental risk assessment

Diclofenac (DCF) is an environmentally persistent, nonsteroidal anti-inflammatory drug (NSAID) with thyroid disrupting properties. Electrochemical advanced oxidation processes (eAOPs) can efficiently remove NSAIDs from wastewater. However, eAOPs can generate transformation products (TPs) with unknown chemical and biological characteristics. In this study, DCF was electrochemically degraded using a boron-doped diamond anode. Ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry was used to analyze the TPs of DCF and elucidate its potential degradation pathways. The biological impact of DCF and its TPs was evaluated using the Xenopus Eleutheroembryo Thyroid Assay, employing a transgenic amphibian model to assess thyroid axis activity. As DCF degradation progressed, in vivo thyroid activity transitioned from anti-thyroid in non-treated samples to pro-thyroid in intermediately treated samples, implying the emergence of thyroid-active TPs with distinct modes of action compared to DCF. Molecular docking analysis revealed that certain TPs bind to the thyroid receptor, potentially triggering thyroid hormone-like responses. Moreover, acute toxicity occurred in intermediately degraded samples, indicating the generation of TPs exhibiting higher toxicity than DCF. Both acute toxicity and thyroid effects were mitigated with a prolonged degradation time. This study highlights the importance of integrating in vivo bioassays in the environmental risk assessment of novel degradation processes.

Environmental risk assessment of pharmaceutical pollutants in the Oro River Sub-basin (Colombia)

Pharmaceuticals and Personal Care Compounds (PPCPs) are contaminants present in wastewater and in the receiving surface waters, which have no regulations and can bring on environmental risks. In this study, we evaluated the presence of six PPCPs in the Oro River Sub-basin (Colombia) and the environmental risk associated with them. We have verified that the monitored rivers show the presence of Ibuprofen, Cephalexin and Carbamazepine; the first ones (Ibuprofen and cephalexin) were those that presented higher concentrations since they are widely prescribed in Colombia. Pharmaceutical compound concentrations in the rivers downstream of the wastewater treatment plants from Floridablanca were higher than in other monitoring sites being a significant point source of contamination. This wastewater treatment plant receives hospital discharges from the city, including internationally recognized clinics accepting patients from different parts of the country. The environmental risk assessment showed that ibuprofen and Cephalexin have a higher impact on aquatic organisms.

Multi-biomarker response of cyanobacteria Synechocystis salina and Microcystis aeruginosa to diclofenac

The cyanobacterial response to pharmaceuticals is less frequently investigated compared to green algae. Pharmaceuticals can influence not only the growth rate of cyanobacteria culture, but can also cause changes at the cellular level. The effect of diclofenac (DCF) as one of the for cyanobacteria has been rarely tested, and DCF has never been applied with cellular biomarkers. The aim of this work was to test the response of two unicellular cyanobacteria (Synechocystis salina and Microcystis aeruginosa) toward DCF (100 mg L-1) under photoautotrophic growth conditions. Such endpoints were analyzed as cells number, DCF uptake, the change in concentrations of photosynthetic pigments, the production of toxins, and chlorophyll a in vivo fluorescence. It was noted that during a 96 h exposure, cell proliferation was not impacted. Nevertheless, a biochemical response was observed. The increased production of microcystin was noted for M. aeruginosa. Due to the negligible absorption of DCF into cells, it is possible that the biochemical changes are induced by an external signal. The application of non-standard biomarkers demonstrates the effect of DCF on microorganism metabolism without a corresponding effect on biomass. The high resistance of cyanobacteria to DCF and the stimulating effect of DCF on the secretion of toxins raise concerns for environment biodiversity.

Contaminants of emerging concern in water and sediment of the Venice Lagoon, Italy

This study investigates for the first time the contamination of water and sediment of the Venice Lagoon by twenty Contaminants of Emerging Concern (CECs): three hormones, six pharmaceutical compounds (diclofenac and five antibiotics, three of which are macrolides), nine pesticides (methiocarb, oxadiazon, metaflumizone, triallate, and five neonicotinoids), one antioxidant (BHT), and one UV filter (EHMC). Water and sediment samples were collected in seven sites in four seasons, with the aim of investigating the occurrence, distribution, and possible emission sources of the selected CECs in the studied transitional environment. The most frequently detected contaminants in water were neonicotinoid insecticides (with a frequency of quantification of single contaminants ranging from 73% to 92%), and EHMC (detected in the 77% of samples), followed by BHT (42%), diclofenac (39%), and clarithromycin (35%). In sediment the highest quantification frequencies were those of BHT (54%), estrogens (ranging from 35% to 65%), and azithromycin (46%). Although this baseline study does not highlight seasonal or spatial trends, results suggested that two of the major emission sources of CECs in the Venice Lagoon could be tributary rivers from its drainage basin and treated wastewater, due to the limited removal rates of some CECs in WWTPs. These preliminary results call for further investigations to better map priority emission sources and improve the understanding of CECs environmental behavior, with the final aim of drawing up a site-specific Watch List of CECs for the Venice Lagoon and support the design of more comprehensive monitoring plans in the future.

Comparison of MAF-32 and a One-Pot Synthesized Superparamagnetic Iron Oxide/MAF-32 Composite for the Adsorption of Diclofenac

The global presence of pharmaceutical pollutants in water sources represents a burgeoning public health concern. Recent studies underscore the urgency of addressing this class of emerging contaminants. In this context, our work focuses on synthesizing a composite material, FexOy/MAF-32, through a streamlined one-pot reaction process, as an adsorbent for diclofenac, an emerging environmental contaminant frequently found in freshwater environments and linked to potential toxicity towards several organisms such as fish and mussels. A thorough characterization was performed to elucidate the structural composition of the composite. The material presents magnetic properties attributed to its superparamagnetic behavior, which facilitates the recovery efficiency of the composite post-diclofenac adsorption. Our study further involves a comparative analysis between the FexOy/MAF-32 and a non-magnetic counterpart, comprised solely of 2-ethylimidazolate zinc polymer. This comparison aims to discern the relative advantages and disadvantages of incorporating magnetic iron oxide nanoparticles in the contaminant removal process facilitated by a coordination polymer. Our findings reveal that even a minimal incorporation of iron oxide nanoparticles substantially enhanced the composite's overall performance in pollutant adsorption.

The mechanism and reaction kinetics of visible light active bismuth oxide deposited on titanium vanadium oxide for aqueous diclofenac photocatalysis

Non-uniform, non-spherical bismuth oxide deposited on titanium vanadium oxide (3%-BVT1) was successfully synthesized via co-precipitation method and assessed for visible light degradation of aqueous diclofenac. The synthesized photocatalysts were characterized using X-ray diffraction, diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. Up to 80.7% diclofenac degradation was observed with a significant increment in reaction rate compared to commercially available Degussa P25 (kapp = 0.0013 → 0.0083 min-1) achieved within 3 h treatment time under optimized parameters of diclofenac concentration (10 mg L-1), catalyst loading (0.1 g L-1), and pH (5). The enhanced photocatalysis could be due to electron-hole separation and contribution of powerful oxidative species •OH > O2•-  > h+  >  > e-. The recyclability experiments indicate that 3%-BVT1 retained its efficiency up to 74.1% over five reaction cycles. Gas chromatography-mass spectrometry analysis indicated the formation of several transformation products during the degradation pathway. The studies of interfering ions depicted mild interference by sulfates, while interference by phosphates and nitrates was negligible during photocatalytic process, i.e., 70, 78.01, and 78.43% for the selected concentrations of 50, 25, and 40 mg L-1 as per their maximum concentrations detected in the natural wastewaters. Thus, 3%-BVT1 is a potential versatile candidate to treat various organic pollutants including pharmaceuticals.

Lab-scale tubular LED UV reactor for continuous photocatalysis

Photocatalytic water treatment is considered a promising technique to prevent micropollutants from entering the environment. However, no off-the-shelf UV reactors on lab scale are available to study new processes and photocatalysts. In this study, we present a tubular UV reactor equipped with 30 UV-LEDs, emitting UV light at 367 nm and a total radiant flux of 42 W. The UV reactor has an irradiated length of 300 mm and can host any transparent chemical reactor on the inside with a maximum diameter of 28 mm. The device is optimized for lab experiments with total dimensions of just 334 mm x 193 mm x 172 mm. Besides water treatment, a broad range of other photochemical and photocatalytic experiments can be performed with the reactor. Two identical UV reactors have been built and are successfully used for photocatalytic water treatment experiments. The degradation of methylene blue with TiO2 as photocatalyst was studied to validate the UV reactor. Furthermore, photocatalytic and hybrid processes were conducted in the UV reactor to degrade a broad range of pharmaceutical micropollutants.

Occurrence of phthalic acid esters (PAEs) and active pharmaceutical ingredients (APIs) in key species of anthozoans in Mediterranean Sea

The Mediterranean Sea's biodiversity is declining due to climate change and human activities, with plastics and emerging contaminants (ECs) posing significant threats. This study assessed phthalic acid esters (PAEs) and active pharmaceutical ingredients (APIs) occurrence in four anthozoan species (Cladocora caespitosa, Eunicella cavolini, Madracis pharensis, Parazoanthus axinellae) using solid phase microextraction (SPME) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). All specimens were contaminated with at least one contaminant, reaching maximum values of 57.3 ng/g for the ∑PAEs and 64.2 ng/g (wet weight) for ∑APIs, with dibutyl phthalate and Ketoprofen being the most abundant. P. axinellae was the most contaminated species, indicating higher susceptibility to bioaccumulation, while the other three species showed two-fold lower concentrations. Moreover, the potential adverse effects of these contaminants on anthozoans have been discussed. Investigating the impact of PAEs and APIs on these species is crucial, given their key role in the Mediterranean benthic communities.

Photodegradation of typical pharmaceuticals changes toxicity to algae in estuarine water: A metabolomic insight

The ubiquitous existence of various pharmaceuticals in the marine environment has received global attention for their risk assessment. However, rather little is known thus far regarding the natural attenuation (e.g., photolysis)-induced product/mixture toxicity of these pharmaceuticals on marine organisms. In this study, the photodegradation behavior, product formation, and risks of two representative pharmaceuticals (i.e., ciprofloxacin, CIP; diclofenac, DCF) were explored in the simulated estuary water. It was noted that both pharmaceuticals can be completely photolyzed within 1 h, and five products of CIP and three products of DCF were identified by a high-resolution liquid chromatography-mass spectrometer. Accordingly, their photodecomposition pathways were tentatively proposed. The in silico prediction suggested that the formed transformation products maintained the persistence, bioaccumulation potential, and multi-endpoint toxic effects such as genotoxicity, developmental toxicity, and acute/chronic toxicity on different aquatic species. Particularly, the non-targeted metabolomics first elucidated that DCF and its photolytic mixtures can significantly affect the antioxidant status of marine algae (Heterosigma akashiwo), triggering oxidative stress and damage to cellular components. It is very alarming that the complete photolyzed DCF sample induced more serious oxidative stress than DCF itself, which called for more concern about the photolysis-driven ecological risks. Overall, this investigation first uncovered the overlooked but serious toxicity of the transformation products of prevalent pharmaceuticals during natural attenuation on marine species.

Adsorption of Diclofenac and PFBS on a Hair Keratin Dimer

Environmental pollution by man-made toxic and persistent organic compounds, found throughout the world in surface and groundwater, has various negative effects on aquatic life systems and even humans. Therefore, it is important to develop and improve water treatment technologies capable of removing such substances from wastewater and purifying drinking water. The two substances investigated are the widely used painkiller diclofenac and a member of the class of "forever chemicals", perfluorobutanesulfonate. Both are known to have serious negative effects on living organisms, especially under long-term exposure, and are detectable in human hair, suggesting adsorption to a part of the hair fiber complex. In this study, a human hair keratin dimer is investigated for its ability to absorb diclofenac and perfluorobutanesulfonate. Initial predictions for binding sites are obtained via molecular docking and subjected to molecular dynamics simulations for more than 1 μs. The binding affinities obtained by the linear interaction energy method are high enough to motivate further research on human hair keratins as a sustainable, low-cost, and easily allocatable filtration material.

Mixture effects of pharmaceuticals carbamazepine, diclofenac and venlafaxine on Mytilus galloprovincialis mussel probed by metabolomics and proteogenomics combined approach

Exposure to single molecules under laboratory conditions has led to a better understanding of the mechanisms of action (MeOAs) and effects of pharmaceutical active compounds (PhACs) on non-target organisms. However, not taking the co-occurrence of contaminants in the environment and their possible interactions into account may lead to underestimation of their impacts. In this study, we combined untargeted metabolomics and proteogenomics approaches to assess the mixture effects of diclofenac, carbamazepine and venlafaxine on marine mussels (Mytilus galloprovincialis). Our multi-omics approach and data fusion strategy highlighted how such xenobiotic cocktails induce important cellular changes that can be harmful to marine bivalves. This response is mainly characterized by energy metabolism disruption, fatty acid degradation, protein synthesis and degradation, and the induction of endoplasmic reticulum stress and oxidative stress. The known MeOAs and molecular signatures of PhACs were taken into consideration to gain insight into the mixture effects, thereby revealing a potential additive effect. Multi-omics approaches on mussels as sentinels offer a comprehensive overview of molecular and cellular responses triggered by exposure to contaminant mixtures, even at environmental concentrations.

Causes of coastal waters pollution with nutrients, chemicals and plastics worldwide

Worldwide, coastal waters contain pollutants such as nutrients, plastics, and chemicals. Rivers export those pollutants, but their sources are not well studied. Our study aims to quantify river exports of nutrients, chemicals, and plastics to coastal waters by source and sub-basin worldwide. We developed a new MARINA-Multi model for 10,226 sub-basins. The global modelled river export to seas is approximately 40,000 kton of nitrogen, 1,800 kton of phosphorous, 45 kton of microplastics, 490 kton of macroplastics, 400 ton of triclosan and 220 ton of diclofenac. Around three-quarters of these pollutants are transported to the Atlantic and Pacific oceans. Diffuse sources contribute by 95-100 % to nitrogen (agriculture) and macroplastics (mismanaged waste) in seas. Point sources (sewage) contribute by 40-95 % to phosphorus and microplastics in seas. Almost 45 % of global sub-basin areas are multi-pollutant hotspots hosting 89 % of the global population. Our findings could support strategies for reducing multiple pollutants in seas.

Proteomic analysis of the hepatic response to a pollutant mixture in mice. The protective action of selenium

Metals and pharmaceuticals contaminate water and food worldwide, forming mixtures where they can interact to enhance their individual toxicity. Here we use a shotgun proteomic approach to evaluate the toxicity of a pollutant mixture (PM) of metals (As, Cd, Hg) and pharmaceuticals (diclofenac, flumequine) on mice liver proteostasis. These pollutants are abundant in the environment, accumulate in the food chain, and are toxic to humans primarily through oxidative damage. Thus, we also evaluated the putative antagonistic effect of low-dose dietary supplementation with the antioxidant trace element selenium. A total of 275 proteins were affected by PM treatment. Functional analyses revealed an increased abundance of proteins involved in the integrated stress response that promotes translation, the inflammatory response, carbohydrate and lipid metabolism, and the sustained expression of the antioxidative response mediated by NRF2. As a consequence, a reductive stress situation arises in the cell that inhibits the RICTOR pathway, thus activating the early stage of autophagy, impairing xenobiotic metabolism, and potentiating lipid biosynthesis and steatosis. PM exposure-induced hepato-proteostatic alterations were significantly reduced in Se supplemented mice, suggesting that the use of this trace element as a dietary supplement may at least partially ameliorate liver damage caused by exposure to environmental mixtures.

Preparation and evaluation of a coated smectite clay-based material modified with epichlorohydrin-dimethylamine for the diclofenac removal

This study reports the analysis of diclofenac removal from aqueous solution using a novel adsorbent coating with amphoteric surface. This adsorbent coating was improved using a new amphoteric ratio to increase its performance for the removal of pharmaceuticals such as diclofenac. The adsorbent coating was formulated using acrylic polymer emulsion, smectite-based clay powder and epichlorohydrin-dimethylamine to obtain a layer form via the implementation of a facile synthesis method. In a previous study, this adsorbent coating was successful to remove cationic and anionic dyes. Therefore, this research aimed to further investigate and test its application in the removal of other emerging water pollutants like pharmaceuticals. SEM, EDX, and FTIR analyses were carried out for the characterization of this novel adsorbent. The effects of adsorbent composition, diclofenac concentration, temperature, and solution pH were studied and modeled. The best conditions to improve the diclofenac adsorption was 303 K and pH 3 where the adsorption capacity was 25.59 mg/g. Adsorption isotherms and kinetics were quantified and modeled, and the corresponding adsorption mechanism was also analyzed. Diclofenac adsorption with this novel material was exothermic and spontaneous. This alternative adsorbent is promising for diclofenac removal from industrial wastewater systems.

Effects of diclofenac, sulfamethoxazole, and wastewater from constructed wetlands on Eisenia fetida: impacts on mortality, fertility, and oxidative stress

Soil contamination with micropollutants is an important global problem and the impact of these pollutants on living organisms cannot be underestimated. The effects of diclofenac (DCF) and sulfamethoxazole (SMX), their mixture (MIX), and wastewater containing these drugs on the mortality and reproduction of Eisenia fetida were investigated. The impact on the activities of antioxidant enzymes in earthworm cells was also assessed. Furthermore, the influence of the following parameters of the vertical flow constructed wetlands on wastewater toxicity was investigated: the dosing system, the presence of pharmaceuticals and the plants Miscanthus giganteus. The compounds and their mixture significantly affected the reproduction and mortality of earthworms. The calculated values of LC50,28 days values were 3.4 ± 0.3 mg kg-1 for DCF, 1.6 ± 0.3 mg kg-1 for SMX, and 0.9 ± 0.1 mg kg-1 for MIX. The EC50 (reproduction assay) for DCF was 1.2 ± 0.2 mg kg-1, whereas for SMX, it was 0.4 ± 0.1 mg kg-1, and for MIX, it was 0.3 ± 0.1 mg kg-1, respectively. The mixture toxicity index (MTI) was calculated to determine drug interactions. For both E. fetida mortality (MTI = 3.29) and reproduction (MTI = 3.41), the index was greater than 1, suggesting a synergistic effect of the mixture. We also observed a negative effect of wastewater (raw and treated) on mortality (32% for raw and 8% for treated wastewater) and fertility (66% and 39%, respectively) of E. fetida. It is extremely important to analyze the harmfulness of microcontaminants to organisms inhabiting natural environments, especially in the case of wastewater for irrigation of agricultural fields.

Green Synthesis of Hydrogel-Based Adsorbent Material for the Effective Removal of Diclofenac Sodium from Wastewater

The removal of pharmaceutical contaminants from wastewater has gained considerable attention in recent years, particularly in the advancements of hydrogel-based adsorbents as a green solution for their ease of use, ease of modification, biodegradability, non-toxicity, environmental friendliness, and cost-effectiveness. This study focuses on the design of an efficient adsorbent hydrogel based on 1% chitosan, 40% polyethylene glycol 4000 (PEG4000), and 4% xanthan gum (referred to as CPX) for the removal of diclofenac sodium (DCF) from water. The interaction between positively charged chitosan and negatively charged xanthan gum and PEG4000 leads to strengthening of the hydrogel structure. The obtained CPX hydrogel, prepared by a green, simple, easy, low-cost, and ecological method, has a higher viscosity due to the three-dimensional polymer network and mechanical stability. The physical, chemical, rheological, and pharmacotechnical parameters of the synthesized hydrogel were determined. Swelling analysis demonstrated that the new synthetized hydrogel is not pH-dependent. The obtained adsorbent hydrogel reached the adsorption capacity (172.41 mg/g) at the highest adsorbent amount (200 mg) after 350 min. In addition, the adsorption kinetics were calculated using a pseudo first-order model and Langmuir and Freundlich isotherm parameters. The results demonstrate that CPX hydrogel can be used as an efficient option to remove DCF as a pharmaceutical contaminant from wastewater.

Antidepressant pharmaceuticals in aquatic systems, individual-level ecotoxicological effects: growth, survival and behavior

The growing consumption of antidepressant pharmaceuticals has resulted in their widespread occurrence in the environment, particularly in waterways with a typical concentration range from ng L^-1 to μg L^-1. An increasing number of studies have confirmed the ecotoxic potency of antidepressants, not only at high concentrations but also at environmentally relevant levels. The present review covers literature from the last decade on the individual-level ecotoxicological effects of the most commonly used antidepressants, including their impact on behavior, growth, and survival. We focus on the relationship between antidepressants physico-chemical properties and dynamics in the environment. Furthermore, we discuss the advantages of considering behavioral changes as sensitive endpoints in ecotoxicology, as well as some current methodological shortcomings in the field, including low standardization, reproducibility and context-dependency.

Development of a detection method for 10 non-steroidal anti-inflammatory drugs residues in four swine tissues by ultra-performance liquid chromatography with tandem mass spectrometry

The ultra-performance liquid chromatography with tandem mass spectrometry (UPLC-MS/MS) detection method was developed for the residues of 10 NSAIDs (salicylic acid, acetylsalicylic acid, acetaminophen, diclofenac, tolfenamic acid, antipyrine, flunixin meglumine, aminophenazone, meloxicam, metamizole sodium) in swine muscle, liver, kidney, and fat. Swine tissue samples were extracted by phosphorylated acetonitrile with the addition of an appropriate amount of internal standard working solution, defatted with acetonitrile-saturated n-hexane, and purified by Hydrophile-Lipophile Balance (HLB) solid-phase extraction column, then separated by UPLC BEH shield RP₁₈ column with 0.1% formic acid in water/0.1% formic acid in acetonitrile with gradient elution, which was detected in the multiple reaction monitoring (MRM) modes. The correlation coefficient of the standard curve equation is greater than 0.99, and the coefficient of variation within and between batches is less than 14.4%. We evaluated the analytical method using two green assessment tools. The method established in this study met the requirements of NSAID residue analysis and provides analytical tools for determining and confirming NSAIDs in swine tissue samples. This is the first report on the simultaneous determination of 10 NSAIDs in four swine tissues by the UPLC-MS/MS method and accurate quantification using deuterated internal standards.

Metabolic effects of diclofenac on the aquatic food chain - 1 H-NMR study of water flea-zebrafish system

In the environment, aquatic organisms are not only directly exposed to pollutants, but the effects can be exacerbated along the food chain. In this study, we investigated the effect of the food (water flea) on the secondary consumer (zebrafish) with the exposure diclofenac (DCF) Both organisms were exposed to an environmentally relevant concentrations (15 µg/L) of diclofenac for five days, and zebrafish were fed exposed and non-exposed water fleas, respectively. Metabolites of the water fleas were directly analyzed using HRMAS NMR, and for zebrafish, polar metabolite were extracted and analyzed using liquid NMR. Metabolic profiling was performed and statistically significant metabolites which affected by DCF exposure were identified. There were more than 20 metabolites with variable importance (VIP) score greater than 1.0 in comparisons in fish groups, and identified metabolites differed depending on the effect of exposure and the effect of food. Specifically, exposure to DCF significantly increased alanine and decreased NAD + in zebrafish, which means energy demand was increased. Additionally, the effects of exposed food decreased in guanosine, a neuroprotective metabolite, which explained that the neurometabolic pathway was perturbated by the feeding of exposed food. Our results which short-term exposed primary consumers to pollutants indirectly affected the metabolism of secondary consumers suggest that the long-term exposure further study remains to be investigated.

Development of zinc ferrite nanoparticles with enhanced photocatalytic performance for remediation of environmentally toxic pharmaceutical waste diclofenac sodium from wastewater

Diclofenac sodium is an anti-inflammatory drug commonly used to cure pain in various treatments. The remarkable potential of this pain-killer leads to its excessive use and, therefore, a persistent water contaminant. Its presence in aqueous bodies is hazardous for both humans and the environment because it causes the growth of harmful drug-resistant bacteria in water. Herein, we present a comparative study of the ZnO and ZnFe₂O₄ as photocatalysts for the degradation of diclofenac sodium, along with their structural and morphological studies. A simple co-precipitation method was used for the synthesis of ZnO and ZnFe₂O₄ and characterized by various analytical techniques. For instance, the UV-Vis study revealed the absorption maxima of ZnO at 320 nm, which was shifted to a longer wavelength region at 365 nm for zinc ferrite. The optical band gaps obtained from the Tauc plot indicated that the incorporation of iron has led to a decreased band gap of zinc ferrite (2.89 eV) than pure ZnO (3.14 eV). The metal-oxygen linkages shown by FTIR indicated the formation of desired ZnO and ZnFe₂O₄, which was further confirmed by XRD. It elucidated the typical hexagonal structure for ZnO and spinel cubic structure for ZnFe₂O₄ with an average crystallite of 31 nm and 44 nm for ZnO and ZnFe₂O₄, respectively. The micrographs obtained by SEM showed rough spherical particles of ZnO, whereas for ZnFe₂O₄ flower-like clustered particles were observed. The photocatalytic investigation against diclofenac sodium revealed the higher degradation efficiency of ZnFe₂O₄ (61.4%) in only 120 min, whereas ZnO degraded only 48.9% of the drug. Moreover, zinc ferrite has shown good recyclability and was stable up to five runs of photodegradation with a small loss (3.9%) of photocatalytic activity. The comparison of two catalysts has suggested the promising role of zinc ferrite in wastewater remediation to eliminate hazardous pharmaceuticals.

A critical review on the synthesis of NH2-MIL-53(Al) based materials for detection and removal of hazardous pollutants

Nowadays, emerging hazardous pollutants have caused many harmful effects on the environment and human health, calling for the state of the art methods for detection, qualification, and treatment. Metal-organic frameworks are porous, flexible, and versatile materials with unique structural properties, which can solve such problems. In this work, we reviewed the synthesis, activation, and characterization, and potential applications of NH₂-MIL-53(Al). This material exhibited intriguing breathing effects, and obtained very high surface areas (182.3-1934 m²/g) with diverse morphologies. More importantly, NH₂-MIL-53(Al) based materials could be used for the detection and removal of various toxic pollutants such as organic dyes, pharmaceuticals, herbicides, insecticides, phenols, heavy metals, and fluorides. We shed light on plausible adsorption mechanisms such as hydrogen bonds, π-π stacking interactions, and electrostatic interactions onto NH₂-MIL-53(Al) adsorbents. Interestingly, NH₂-MIL-53(Al) based adsorbents could be recycled for many cycles with high stability. This review also recommended that NH₂-MIL-53(Al) based materials can be a good platform for the environmental remediation fields.

Moving beyond standard toxicological metrics: The effect of diclofenac on planktonic host-parasite interactions

Pharmaceuticals are increasingly released into surface waters and therefore ubiquitous in aquatic systems. While pharmaceuticals are known to influence species interactions, their effect on host-parasite interactions is still underexplored despite potential ecosystem-level consequences. Here, we ask whether diclofenac, a widely used non-steroid anti-inflammatory drug, affects the interaction between a phytoplankton host (Staurastrum sp.; green alga) and its obligate fungal parasite (Staurastromyces oculus; chytrid fungus). We hypothesized that the effect of increasing diclofenac concentration on the host-parasite system depends on parasite exposure. We assessed acute and chronic effects of a wide range of diclofenac concentrations (0-150 mg/L) on host and parasite performance using a replicated long gradient design in batch cultures. Overall system response summarizing parameters related to all biotic components in an experimental unit i.e., number of bacteria and phytoplankton host cells along with photosynthetic yield (a measure of algal cell fitness), depended on diclofenac concentration and presence/absence of parasite. While host standing biomass decreased at diclofenac concentrations >10 mg/L in non-parasite-exposed treatments, it increased at ≥10 mg/L in parasite-exposed treatments since losses due to infection declined. During acute phase (0-48 h), diclofenac concentrations <0.1 mg/L had no effect on host net-production neither in parasite-exposed nor non-parasite-exposed treatments, but parasite infection ceased at 10 mg/L. During chronic phase (0-216 h), host net-production declined only at concentrations >10 mg/L in non-parasite-exposed cultures, while it was overall close to zero in parasite-exposed cultures. Our results suggest that chytrid parasites are more sensitive to diclofenac than their host, allowing a window of opportunity for growth of phytoplankton hosts, despite exposure to a parasite. Our work provides a first understanding about effects of a pharmaceutical on a host-parasite interaction beyond those defined by standard toxicological metrics.

Influence of the Type and the Amount of Surfactant in Phillipsite on Adsorption of Diclofenac Sodium

Modified phillipsite samples were prepared with two different amounts (monolayer and bilayer coverage) of surfactants octadecyldimethylbenzylammonium chloride (O) and dodecylamine (D). Composites were characterized by Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR–ATR), thermal analysis and determination of zeta potential, and subsequently tested for removal of diclofenac sodium (DCF). Drug adsorption experiments were performed under different initial DCF concentrations and different contact times. In order to investigate the influence of the chemical structure of surfactants used for modification of phillipsite on the preparation and properties of composites and DCF adsorption, experimental data were compared with previously published results on DCF adsorption by composites containing phillipsite and the same amounts of surfactants cetylpyridinium chloride (C) and Arquad®2HT-75 (A). DCF adsorption isotherms for O and D composites showed a better fit with the Langmuir model with maximum adsorption capacities between 12.3 and 38.4 mg/g and are similar to those for C and A composites, while kinetics run followed a pseudo-second-order model. Composites containing either benzyl or pyridine functional groups showed higher adsorption of DCF, implying that surfactant structure has a significant impact on drug adsorption. Drug adsorption onto O, D, C and A composites was also confirmed by FTIR–ATR spectroscopy and zeta potential measurements.

Laccase-assisted degradation of emerging recalcitrant compounds - A review

The main objective of this review is to provide up to date, brief, irrefutable, organized data on the conducted experiments on a range of emerging recalcitrant compounds such as Diclofenac (DCF), Chlorophenols (CPs), tetracycline (TCs), Triclosan (TCS), Bisphenol A (BPA) and Carbamazepine (CBZ). These compounds were selected from the categories of pharmaceutical contaminants (PCs), endocrine disruptors (EDs) and personal care products (PCPs) on the basis of their toxicity and concentration retained in the environment. In this context, detailed mechanism of laccase mediated degradation has been conversed that laccase assisted degradation occurs by one electron oxidation involving redox potential as underlying element of the process. Further, converging towards biotechnology, laccase immobilization increased removal efficiency, storage and reusability through various experimentally conducted studies. Laccase is being considered noteworthy as mediators facilitate laccase in oxidation of non-phenolic compounds and thereby increasing its substrate range which is being discussed in further in the review. The laccase assisted degradation mechanism of each compound has been elucidated but further studies to undercover proper degradation mechanisms needs to be performed.

Diclofenac removal by the microalgae species Chlorella vulgaris, Nannochloropsis oculata, Scenedesmus acutus, and Scenedesmus obliquus

In this work, we evaluated the removal efficiency of diclofenac by Chlorella vulgaris OW-01, Nannochloropsis oculata CCAP 849/7, Scenedesmus acutus UTEX 72, and Scenedesmus obliquus CCAP 276/2. Each microalga was grown in media with different concentrations (50 and 100% of the original formulation) of carbon, nitrogen, and phosphorus, to evaluate their effect on the removal of diclofenac. We also evaluated the photodegradation of diclofenac under the same conditions. The diclofenac removed from the media ranged from 59 to 92%, obtaining the highest removal with S. obliquus. The diclofenac adsorbed on the cell walls ranged from 12.2 to 26.5%, obtaining the highest adsorption with S. obliquus. The diclofenac degraded by light ranged from 15 to 28%. The nutrient deficit showed no influence on the removal of diclofenac in any of the microalgae under study. These results indicate that S. obliquus is the best alternative for the bioremediation of diclofenac.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03268-2.

Health effects and risks associated with the occurrence of pharmaceuticals and their metabolites in marine organisms and seafood

Pharmaceuticals and their metabolites are continuously invading the marine environment due to their input from the land such as their disposal into the drains and sewers which is mostly followed by their transfer into wastewater treatment plants (WWTPs). Their incomplete removal in WWTPs introduces pharmaceuticals into oceans and surface water. To date, various pharmaceuticals and their metabolites have been detected in marine environment. Their occurrence in marine organisms raises concerns regarding toxic effects and development of drug resistant genes. Therefore, it is crucial to review the health effects and risks associated with the presence of pharmaceuticals and their metabolites in marine organisms and seafood. This is an important study area which is related to the availability of seafood and its quality. Hence, this study provides a critical review of the information available in literature which relates to the occurrence and toxic effects of pharmaceuticals in marine organisms and seafood. This was initiated through conducting a literature search focussing on articles investigating the occurrence and effects of pharmaceuticals and their metabolites in marine organisms and seafood. In general, most studies on the monitoring of pharmaceuticals and their metabolites in marine environment are conducted in well developed countries such as Europe while research in developing countries is still limited. Pharmaceuticals present in freshwater are mostly found in seawater and marine organisms. Furthermore, the toxicity caused by different pharmaceutical mixtures was observed to be more severe than that of individual compounds.

Ecofriendly and sustainable Sargassum spp.-based system for the removal of highly used drugs during the COVID-19 pandemic

Analgesic consumption increased significantly during the COVID-19 pandemic. A high concentration of this kind of drug is discarded in the urine, reaching the effluents of rivers, lakes, and seas. These medicines have brought serious problems for the flora and, especially, the ecosystems’ fauna. This paper presents the results of removing diclofenac, ibuprofen, and paracetamol in an aqueous solution, using Sargassum spp. from the Caribbean coast. The study consisted of mixing each drug in an aqueous solution with functionalized Sargassum spp in a container under constant agitation. Therefore, this work represents an alternative to solve two of the biggest problems in recent years; first, the reduction of the overpopulation of sargassum through its use for the remediation of the environment. Second is the removal of drug waste used excessively during the COVID-19 pandemic. Liquid samples of the solution were taken at intervals of 10 min and analyzed by fluorescence to determine the concentration of the drug.

The sorption capacity for diclofenac, ibuprofen, and paracetamol was 2.46, 2.08, and 1.41 μg/g, corresponding to 98 %, 84 %, and 54 % of removal, respectively. The removal of the three drugs was notably favored by increasing the temperature to 30 and 40 °C, reaching efficiencies close to 100 %. Moreover, the system maintains its effectiveness at various pH values. In addition, the Sargassum used can be reused for up to three cycles without reducing its removal capacity. The wide diversity of organic compounds favors the biosorption of drugs, removing them through various kinetic mechanisms. On the other hand, the Sargassum used in the drugs removal was analyzed by X-ray diffraction, FTIR spectroscopy, TGA analysis, and scanning electron microscopy before and after removal. The results showed an evident modification in the structure and morphology of the algae and demonstrated the presence of the biosorbed drugs. Therefore, this system is sustainable, simple, economical, environmentally friendly, highly efficient, and scalable at a domestic and industrial level that can be used for aquatic remediation environments.

Long-term stability of diclofenac and 4-hydroxydiclofenac in the seawater and sediment microenvironments: Evaluation of biotic and abiotic factors

Studies in recent years have shown that significant amounts of diclofenac (DCF) and its metabolites are present in marine coastal waters. Their continuous flow into the environment may be associated with numerous negative effects on both fauna and flora. Although more and more is known about the effects of pharmaceuticals on marine ecosystems, there are still many issues that have not received enough attention, but are essential for risk assessment, such as long term stability. Furthermore, interaction of pharmaceuticals with sediments, which are inhabited by rich microbial, meiofaunal and macrobenthic communities need investigation. Therefore, we undertook an analysis of the stability of DCF and its metabolite, 4-hydroxy diclofenac, in seawater and sediment collected from the brackish environment of Puck Bay. Our 29-day experiment was designed to gain a better understanding of the fate of these compounds under experimental conditions same as near the seafloor. Diclofenac concentration decreased by 31.5% and 20.4% in the tanks with sediment and autoclaved sediment, respectively during 29-day long experiment. In contrast, the concentration of 4-OH diclofenac decreased by 76.5% and 90.2% in sediment and autoclaved sediment, respectively. The concentration decrease of both compounds in the sediment tanks resulted from their sorption in the sediment and biodegradation. Obtained results show that marine sediments favour DCF and 4-OH DCF removal from the water column.

Exposure to diclofenac alters thyroid hormone levels and transcription of genes involved in the hypothalamic-pituitary-thyroid axis in zebrafish embryos/larvae

Diclofenac (DCF), one of typical non-steroidal anti-inflammatory drugs (NSAIDs), has been frequently detected in various environmental media. Nevertheless，the potential endocrine disrupting effects of DCF on fish were poorly understood. In the present study, zebrafish embryos/larvae were used as a model to evaluate the adverse effects of DCF on development and thyroid system. The results demonstrated that DCF only significantly decreased the heart rate at 72 h post-fertilization (hpf), exhibiting limited influence on the embryonic development of zebrafish. Treatment with DCF significantly reduced whole-body thyroxine (T4) levels, and changed transcriptional levels of several genes related to the hypothalamic-pituitary-thyroid (HPT) axis. These findings provide important information regarding to the mechanisms of DCF-induced developmental toxicity and thyroid disruption in fish.

Contribution of Illicit Drug Use to Pharmaceutical Load in the Environment: A Focus on Sub-Saharan Africa

Illicit drug abuse and addiction are universal issues requiring international cooperation and interdisciplinary and multisectoral solutions. These addictive substances are utilized for recreational purposes worldwide, including in sub-Saharan Africa. On the other hand, conventional wastewater treatment facilities such as waste stabilization ponds lack the design to remove the most recent classes of pollutants such as illicit drug abuse. As a result, effluents from these treatment schemes contaminate the entire ecosystem. Public health officials are concerned about detecting these pollutants at alarming levels in some countries, with potential undesirable effects on aquatic species and increased health hazards through exposure to contaminated waters or recycling treated or untreated effluents in agriculture. Contaminants including illicit substances enter the environment by human excreta following illegal intake, spills, or through direct dumping, such as from clandestine laboratories, when their manufacturer does not follow accepted production processes. These substances, like other pharmaceuticals, have biological activity and range from pseudopersistent to highly persistent compounds; hence, they persist in the environment while causing harm to the ecosystem. The presence of powerful pharmacological agents such as cocaine, morphine, and amphetamine in water as complex combinations can impair aquatic organisms and human health. These compounds can harm human beings and ecosystem health apart from their low environmental levels. Therefore, this article examines the presence and levels of illicit substances in ecological compartments such as wastewater, surface and ground waters in sub-Saharan Africa, and their latent impact on the ecosystem. The information on the occurrences of illicit drugs and their metabolic products in the sub-Saharan Africa environment and their contribution to pharmaceutical load is missing. In this case, it is important to research further the presence, levels, distribution, and environmental risks of exposure to human beings and the entire ecosystem.

Design and application of molecularly imprinted polymers for adsorption and environmental assessment of anti-inflammatory drugs in wastewater samples

In this study, a series of molecularly imprinted polymers (MIPs) have been synthesized using separately diclofenac, naproxen, and ibuprofen as templates with three different polymerization approaches. Two functional monomers, methacrylic acid (MAA) and 2-vinylpyridine (2-VP), were tested and ethylene glycol dimethacrylate (EGDMA) was used as crosslinker; also, template-free polymers (NIPs) were synthesized. It was found that the MIP with the highest retention percentage for diclofenac was the one prepared by the emulsion approach and with MAA (98.3%); for naproxen, the one prepared by the bulk polymerization with MAA (99%); and for ibuprofen, the one synthesized by bulk with 2-VP (97.7%). These three MIPs were characterized by scanning electron microscopy, thermogravimetric test, Fourier transform infrared, specific area measurements, and surface charge. It was found that the emulsion method allowed particle size control, while the bulk method gave heterogeneous particles. The three evaluated MIPs exhibited thermal stability up to 300 °C, and it was observed that 2-VP confers greater stability to the material. From the BET analysis, it was demonstrated that the MIPs and NIPs evaluated are mesoporous materials with a pore size between 10 and 20 nm. In addition, the monomer influenced the surface charge of the material, since the MAA conferred an acidic point of zero charge (PZC), while the 2-VP conferred a PZC of basic character. Through adsorption isotherms, it was determined  that there is a higher adsorption capacity of the MIPs at acidic pH following a pseudo-second-order kinetic model. Finally, the MIPs were used to determine the non-steroidal anti-inflammatory drugs (NSAIDs) understudy in San Luis Potosí, México, wastewater, finding concentrations of 0.642, 0.985, and 0.403 mg L^-1 for DCF, NPX, and IBP, respectively.

Effects of Diclofenac on the Reproductive Health, Respiratory Rate, Cardiac Activity, and Heat Tolerance of Aquatic Animals

Diclofenac is an important pharmaceutical present in the water cycle of wastewater treatment and one of the most distributed drugs in aquatic ecosystems. Despite the great interest in the fate of diclofenac in freshwaters, the effects of environmentally relevant concentrations on invertebrates are still unclear. Two species of freshwater invertebrates, the amphipod Gmelinoides fasciatus and the bivalve mollusk Unio pictorum, were exposed to diclofenac concentrations of 0.001-2 μg/L (environmentally relevant levels) for 96 h. A set of biological endpoints (survival, fecundity, embryo abnormalities, respiration and heart rates, heat tolerance, and cardiac stress tolerance) were estimated in exposed invertebrates. Effects of diclofenac on amphipod metabolic rate and reproduction (number and state of embryos) and adaptive capacity (cardiac stress tolerance) in both species were evident. The oxygen consumption of amphipods exposed to diclofenac of 0.1-2 μg/L was 1.5-2 times higher than in the control, indicating increased energy requirements for standard metabolism in the presence of diclofenac (>0.1 μg/L). The heart rate recovery time in mollusks after heating to critical temperature (30 °C) was 1.7 and 9 times greater in mollusks exposed to 0.1 and 0.9 μg/L, respectively, than in the control (24 min). A level of diclofenac >0.9 μg/L adversely affected amphipod embryos, leading to an increase in the number of embryos with impaired development, which subsequently died. Thus, the lowest effective concentration of diclofenac (0.1 μg/L) led to increased energy demands of animals while reducing cardiac stress tolerance, and at a level close to 1 μg/L reproductive disorders (elevated mortality of the embryos) occurred. Environ Toxicol Chem 2022;41:677-686. © 2021 SETAC.

Environmental Metabolomics Promises and Achievements in the Field of Aquatic Ecotoxicology: Viewed through the Pharmaceutical Lens

Scientists often set ambitious targets using environmental metabolomics to address challenging ecotoxicological issues. This promising approach has a high potential to elucidate the mechanisms of action (MeOAs) of contaminants (in hazard assessments) and to develop biomarkers (in environmental biomonitoring). However, metabolomics fingerprints often involve a complex mixture of molecular effects that are hard to link to a specific MeOA (if detected in the analytical conditions used). Given these promises and limitations, here we propose an updated review on the achievements of this approach. Metabolomics-based studies conducted on the effects of pharmaceutical active compounds in aquatic organisms provide a relevant means to review the achievements of this approach, as prior knowledge about the MeOA of these molecules could help overcome some shortcomings. This review highlighted that current metabolomics advances have enabled more accurate MeOA assessment, especially when combined with other omics approaches. The combination of metabolomics with other measured biological endpoints has also turned out to be an efficient way to link molecular effects to (sub)-individual adverse outcomes, thereby paving the way to the construction of adverse outcome pathways (AOPs). Here, we also discuss the importance of determining MeOA as a key strategy in the identification of MeOA-specific biomarkers for biomonitoring. We have put forward some recommendations to take full advantage of environmental metabolomics and thus help fulfil these promises.

Nitrosation and nitration of diclofenac and structurally related nonsteroidal anti-inflammatory drugs (NSAIDs) in nitrifying activated sludge

Diclofenac (DCF) is a highly consumed non-steroidal anti-inflammatory drug that is excreted partially metabolized and is poorly removed during wastewater treatment. Previous findings demonstrated that DCF in wastewater treatment plants (WWTP) is partially removed to nitro/nitroso compounds. The reactive nitrogen species, that are microbially produced during nitrification in the activated sludge of WWTP, were suspected to be involved in the transformation of DCF. Therefore, here, we investigated the molecular features governing such biotransformation and the role played by nitrifying bacteria by biodegradation experiments at lab scale in enriched nitrifying sludge bioreactors spiked with DCF and other structurally related non-steroidal anti-inflammatory drugs (NSAIDs). We provided evidence of the incorporation of NO/NO₂ groups into DCF originated from ammonia by isotopically labelled biodegradation experiments. Nitroso and nitro-derivatives were tentatively identified for all NSAIDs studied and biotransformation mechanisms were proposed. Our findings from biodegradation experiments performed under different incubation conditions suggested that biotransformation of DCF and its related NSAIDs might not only be microbially mediated by ammonia oxidizing bacteria, but other nitrifiers co-occurring in the activated sludge as ammonia oxidizing archaea and nitrite oxidizing bacteria. Follow-up studies should be conducted to disentangle such complex behaviour in order to improve removal of these contaminants in WWTPs.

Synthesis of glutaraldehyde-modified silica/chitosan composites for the removal of water-soluble diclofenac sodium

Composite materials are effective adsorbents for the removal of various types of contaminants, such as pharmaceutical products. However, they require improvement to achieve a good adsorption capacity. This study presents the development of a promising adsorbent: silica/chitosan modified with different proportions of glutaraldehyde, which involves the D-glucosamine units from chitosan. The developed materials were evaluated for their ability to remove diclofenac sodium. The adsorption data showed that the diclofenac adsorption efficiency increased with increasing degree of glutaraldehyde crosslinking. The equilibrium and kinetic data were well fit by the Liu and Elovich models, respectively, and the maximum adsorption capacity was 237.8 mg/g. Therefore, it can be assumed that the process is predominantly chemical and exothermic, with a high affinity between the adsorbents and diclofenac sodium. The adsorption mechanisms were investigated to better understand the interactions, and the predominance of covalent bonds with the self-polymerized glutaraldehyde was verified.

Biochemical and respiratory parameters in a gastropod Radix balthica exposed to diclofenac

Diclofenac, an anti-inflammatory drug, is often detected in natural waters in the ng/L to μg/L range, posing a threat to aquatic organisms. The study focused on the effects of diclofenac in a gastropod mollusk Radix balthica. A 72-h exposure to environmentally relevant concentrations of diclofenac caused deviations from the baseline activities of the studied enzymes in the digestive gland of snails. Acetylcholinesterase activity was induced by the end of exposure, with the most pronounced increase at 3 μg/L. Results on glutathione-S-transferase activity were nonuniform, and no significant variations were observed in thiobarbituric acid reactive substances concentrations, indicating that diclofenac did not cause oxidative stress in the digestive gland of R. balthica at 0.04-4 μg/L range. Diclofenac lowered the oxygen consumption rate in snails in a concentration-dependent manner. At concentrations ≥0.9 μg/L, animals attempted to switch aquatic respiration to breathing air to regulate their metabolic needs. The study showed that diclofenac at environmentally relevant concentrations affected the fitness of R. balthica.

First transcriptome of the copepod Gladioferens pectinatus subjected to chronic contaminant exposures

Contaminants are often at low concentrations in ecosystems and their effects on exposed organisms can occur over long periods of time and across multiple generations. Alterations to subcellular mechanistic pathways in response to exposure to contaminants can provide insights into mechanisms of toxicity that methods measuring higher levels of biological may miss. Analysis of the whole transcriptome can identify novel mechanisms of action leading to impacts in exposed biota. The aim of this study was to characterise how exposures to copper, benzophenone and diclofenac across multiple generations altered molecular expression pathways in the marine copepod Gladioferens pectinatus. Results of the study demonstrated differential gene expression was observed in cultures exposure to diclofenac (569), copper (449) and benzophenone (59). Pathways linked to stress, growth, cellular and metabolic processes were altered by exposure to all three contaminants with genes associated with oxidative stress and xenobiotic regulation also impacted. Protein kinase functioning, cytochrome P450, transcription, skeletal muscle contraction/relaxation, mitochondrial phosphate translocator, protein synthesis and mitochondrial methylation were all differentially expressed with all three chemicals. The results of the study also suggested that using dimethyl sulfoxide as a dispersant influenced the transcriptome and future research may want to investigate it's use in molecular studies. Data generated in this study provides a first look at transcriptomic response of G. pectinatus exposed to contaminants across multiple generations, future research is needed to validate the identified biomarkers and link these results to apical responses such as population growth to demonstrate the predictive capacity of molecular tools.

Functionalized Multi-Walled Carbon Nanotube–Based Aptasensors for Diclofenac Detection

Driven by the increasing concern about the risk of diclofenac (DCF) residues as water pollutants in the aqueous environment and the growing need for its trace determination, a simple but sensitive electrochemical aptasensor for the trace detection of DCF was developed. To construct the aptasensor, the amine-terminated DCF aptamer was covalently immobilized on the surface of the carboxylic acid–functionalized multi-walled carbon nanotube (f-MWCNT)–modified glassy carbon electrode (GCE) through EDC/NHS chemistry. The f-MWCNTs provide a reliable matrix for aptamer immobilization with high grafting density, while the aptamer serves as a biorecognition probe for DCF. The obtained aptasensor was incubated with DCF solutions at different concentrations and was then investigated by electrochemical impedance spectroscopy (EIS). It displays two linear ranges of concentration for DCF detection, from 250 fM to 1pM and from 1 pM to 500 nM with an extremely low detection limit of 162 fM. Also, the developed biosensor shows great reproducibility, acceptable stability, and reliable selectivity. Therefore, it offers a simple but effective aptasensor construction strategy for trace detection of DCF and is anticipated to show great potential for environmental applications.

Transformation products of pharmaceuticals in the environment: Their fate, (eco)toxicity and bioaccumulation potential

Nowadays, a huge scientific attention is being paid to the chemicals of emerging concern, which may pose a significant risk to the human and whole ecosystems. Among them, residues of pharmaceuticals are a widely investigated group of chemicals. In recent years it has been repeatedly demonstrated that pharmaceuticals are present in the environment and that some of them can be toxic to organisms as well as accumulate in their tissues. However, even though the knowledge of the presence, fate and possible threats posed by the parent forms of pharmaceuticals is quite extensive, their transformation products (TPs) have been disregarded for long time. Since last few years, this aspect has gained more scientific attention and recently published papers proved their common presence in the environment. Also the interest in terms of their toxicity, bioconcentration and stability in the environment has increased. Therefore, the aim of our paper was to revise and assess the current state of knowledge on the fate and effects resulting from the presence of the pharmaceuticals' transformation drugs in the environment. This review discusses the metabolites of compounds belonging to six major pharmaceutical groups: SSRIs, anticancer drugs, antibiotics, antihistamines, NSAIDs and opioids, additionally discussing other individual compounds for which literature data exist. The data presented in this paper prove that some TPs may be as harmful as their native forms, however for many groups of drugs this data is still insufficient to assess the risk posed by their presence in the environment.

A rapid magnetic bead-based immunoassay for sensitive determination of diclofenac

Increasing contamination of environmental waters with pharmaceuticals represents an emerging threat for the drinking water quality and safety. In this regard, fast and reliable analytical methods are required to allow quick countermeasures in case of contamination. Here, we report the development of a magnetic bead-based immunoassay (MBBA) for the fast and cost-effective determination of the analgesic diclofenac (DCF) in water samples, based on diclofenac-coupled magnetic beads and a robust monoclonal anti-DCF antibody. A novel synthetic strategy for preparation of the beads resulted in an assay that enabled for the determination of diclofenac with a significantly lower limit of detection (400 ng/L) than the respective enzyme-linked immunosorbent assay (ELISA). With shorter incubation times and only one manual washing step required, the assay demands for remarkably shorter time to result (< 45 min) and less equipment than ELISA. Evaluation of assay precision and accuracy with a series of spiked water samples yielded results with low to moderate intra- and inter-assay variations and in good agreement with LC–MS/MS reference analysis. The assay principle can be transferred to other, e.g., microfluidic, formats, as well as applied to other analytes and may replace ELISA as the standard immunochemical method.

Shifted mineral ions transport in the mollusk Unio pictorum exposed to environmental concentrations of diclofenac

Previous studies showed that diclofenac (DCF), when released in the environment, can be toxic to aquatic animals (fish and mollusks), affecting gills, which are the main organ of ionic regulation. This study focuses on detecting the effects of relevant environmental concentrations of DCF (0.1-1 μg L^-1) on the transport of main mineral cations, i.e. sodium (Na), potassium (K), calcium (Ca), and magnesium (Mg), by widely distributed freshwater bivalve mollusks Unio pictorum. After 96-h exposure to river aerated water at 25 °C with DCF concentrations of 0 (control), 0.1 (treatment I), and 1 μg L^-1 (treatment II), the mollusks were transferred to deionized water, and daily (for 7 days) concentrations of these cations in the medium have been measured. Animals exposed to 1 μg L^-1 DCF maintained the ionic balance between the organism and the diluted medium at a significantly higher level of Na, K, and Mg ions in water compared to the control and animals exposed to 0.1 μg L^-1 DCF. At 0.1 μg L^-1 DCF, the greater loss concerning the control (p < 0.05) was found only for Na ion. There were no differences in the dynamics of Ca ions between control and both treatments. This study showed that detectable environmental concentrations of DCF in natural waters can influence the transport of main cations required by freshwater animals to maintain their ionic balance, and the observed effect (elevated ion loss) is ion-specific and also dose-dependent.

Occurrence and ecotoxicological risk assessment of non-steroidal anti-inflammatory drugs in South African aquatic environment: What is known and the missing information?

Non-steroidal anti-inflammatory drugs (NSAIDs) are medications used individually or as mixtures with other pharmaceuticals for the treatment of various illnesses. Their easy accessibility and high human consumption have resulted to their detection at high concentrations in South African water resources. In the present work, an extensive review of the occurrence and ecotoxicological risk assessment of NSAIDs in South African aquatic environment is provided. Reviewed literature suggested ibuprofen, naproxen, diclofenac, ketoprofen and fenoprofen as the most prominent NSAIDs in the South African aquatic environment. Among these NSAIDs, higher concentrations of ibuprofen are common in South African waters. As a result, this drug was found to pose high ecotoxicological risks towards the aquatic organisms with the highest risk quotients of 14.9 and 11.9 found for algae in surface water and wastewater, respectively. Like in other parts of the world, NSAIDs are not completely removed in wastewater treatment plants. Removal efficiencies below 0% due to higher concentrations of NSAIDs in wastewater effluents rather than influents were observed in certain instances. The detection of NSAIDs in sediments and aquatic plants could serve as the important starting step to investigate other means of NSAIDs removal from water. In conclusion, recommendations regarding future studies that could paint a clearer picture regarding the occurrence and ecotoxicological risks posed by NSAIDs in South African aquatic environment are provided.

Diclofenac Alters the Cell Cycle Progression of the Green Alga Chlamydomonas reinhardtii

The aim of the study was to verify the hypothesis that a potential cause of the phytotoxicity of diclofenac (DCF, a non-steroidal anti-inflammatory drug) is an effect of cell cycle progression. This research was conducted using synchronous cultures of a model organism, green alga Chlamydomonas reinhardtii. The project examined DCF effects on selected parameters that characterize cell cycle progression, such as cell size, attainment of commitment points, DNA replication, number of nuclei formed during cells division and morphology of cells in consecutive stages of the cell cycle, together with the physiological and biochemical parameters of algae cells at different stages. We demonstrated that individual cell growth remained unaffected, whereas cell division was delayed in the DCF-treated groups grown in continuous light conditions, and the number of daughter cells from a single cell decreased. Thus, the cell cycle progression is a target affected by DCF, which has a similar anti-proliferative effect on mammalian cells.

Application of ultra-sensitive GC-QqQ-MS/MS (MRM) method for the determination of diclofenac in whole blood samples without derivatization

Diclofenac is one of the most frequently prescribed nonsteroidal anti-inflammatory drugs (NSAID) worldwide. Although it is considered a relatively safe drug, it exhibits high toxicity to some animal populations (e.g., raptors). An ultra-sensitive gas chromatography method, coupled with tandem mass spectrometry (GC-QqQ-MS/MS) with an electron impact (EI) ionization source for diclofenac determination in whole blood samples without a derivatization procedure, was developed and fully validated. Diclofenac-d₄ was used as an internal standard. The determination of analytes was performed in the multiple-reaction monitoring (MRM) mode. The method was linear in the range from 0.1 to 200 ng/mL, with a coefficient of determination of 0.999 (R²). The lower limit of quantification was 0.1 ng/mL, and the detection limit was 0.05 ng/mL. The blood samples (200 µL) were prepared by liquid-liquid extraction (pH3) with ethyl acetate. The intra- and interday accuracies and precisions did not exceed 15%. Recovery and matrix effect values were in the range of 92.2-105.9% and -7.8 to 5.9%, respectively. The developed method was applied in authentic blood samples. A simple and precise GC-QqQ-MS/MS method can be potentially applied for routine clinical, toxicological and environmental analysis.