Microplastics in the surface seawaters of Chabahar Bay, Gulf of Oman (Makran Coasts)

Microplastics removal efficiency and risk analysis of wastewater treatment plants in Oman

Microplastics (MPs) have recently been documented as an emerging pollutant that poses a critical threat to environment. Wastewater treatment plants (WWTPs) are commonly regarded as significant contributors to the presence of MPs. This study aimed to assess the MPs load of three wastewater treatment facilities in Oman using various treatments, including MBR, SBR, and CAS. Wastewater samples from influent, effluent, and sludge were collected and analyzed to determine the concentration, morphology, size, color, and polymer type of the MPs. A set of sieves with a mesh size range of 1 mm-45 μm was used to for filtration. Oxidation treatment was applied for all samples using Fenton's reagent, followed by density separation by sodium chloride solution. The Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR- FTIR) method was utilized to test 10% from each sampling point to confirm the polymer types of the MPs. The pollution load index (PLI) and hazard index (HI) have been employed to assess the risk associated with the chemical toxicity and concentration of detected particles. The PROMETHEE method was used to rank the risk of sampling sites based on different criteria that posed potential ecological and human health risks. The results indicate that the average concentrations of 0.99 MP/L, 1.38 MP/L, and 0.93 MP/L were detected in the final treated effluent of WWTP A, WWTP B, and WWTP C, respectively. These concentrations correspond to overall removal efficiencies of 82.5%, 77.4%, and 79.2% for WWTP A, WWTP B, and WWTP C, respectively Most MPs found in tertiary effluent were smaller particles (425 μm) and fiber-shaped. The major types of MPs were polypropylene (PP), low-density polyethylene (LDPE), polyurethane (PU), polyethylene terephthalate (PET), and Polyvinyl chloride (PVC). This study showed that treated effluent and sludge release significant MPs into the environment.

Microplastics and plastisphere at surface waters in the Southwestern Caribbean sea

Pollution generated by plastic waste has brought an environmental problem characterized by the omnipresence of smaller pieces of this material known as microplastics (MP). This issue was addresses by collecting samples with 250 μm pore size nets in two marine-coastal sectors of Southwestern Caribbean Sea during two contrasting seasons. Higher concentrations were found in rainy season than in dry season, reaching respectively 1.72 MP/m3 and 0.22 MP/m3. Within each sector, there were differences caused firstly by localities of higher concentrations of semi-closed water bodies localities during rainy season (Ciénaga Grande de Santa Marta and La Caimanera marsh), and secondly by lower concentrations of localities with less influenced of flow rates during dry season (Salamanca and Isla Fuerte). Moreover, the lowest concentration in dry season corresponding to La Caimanera marsh reflects how the community environmental management might decrease MP pollution. In both sectors and seasons, the particles of 0.3 mm (0.3-1.4 mm) size class dominated over those of 1.4 mm (1.4-5.0 mm) (reaching each respectively 1.33 MP/m3 and 0.39 MP/m3), with a dominance of fibers, except in the rainy season in Magdalena, where they were films. Using the FTIR technique, polypropylene was identified as the most abundant polymer in both sectors. The composition of the assemblage of microorganisms attached to microplastics presented higher richness and differed from that of free-living planktonic microbes. The most abundant members of the plastisphere were proteobacteria whose major representation was the pathogenic genus Vibrio, while the cyanobacteria dominated in seawater samples.

Impact of anthropogenic activities on the abundance of microplastics in copepods sampled from the southeast coast of India

In recent year, the use of plastics has become inevitable due to its unique properties that allow for the production of durable and non-durable goods. Post use, plastics enter the waste stream and now can be found in all compartments of the biosphere as microplastics (MPs). This study presents the abundance of MPs in surface water and within copepods in the southwestern Bay of Bengal during dry (June 2022) and wet season (November 2022). The MPs in the surface water were found in all three regions [Chennai, Tuticorin and Nagapattinam (four locations in each region)] and maximum in wet season (53 particles/m3). Moreover, during dry season the mean ingestion of MPs by copepods in Chennai (0.103 ± 0.04 particles/individual), Tuticorin (0.11 ± 0.07 particles/individual) and Nagapattinam (0.036 ± 0.01 particles/individual) is high compared to the wet season. The maximum level of MPs found in both surface water and ingestion by copepods in Tuticorin and Chennai is subjective to the high maritime activities than Nagapattinam region. Whatever, the anthropogenic activities in the study region increase the bioavailability of MPs pollutant in the copepods and transported to higher trophic levels, endangering marine life and human health. Hence, further studies are needed to determine their potential impact on marine food chain in this alarming situation.

Microplastics in Scylla Serrata: A baseline study from southwest India

Scylla serrata plays a crucial role in India's seafood exports yet there exists limited understanding on the occurrence of microplastics (MPs) in these crabs. In this baseline study, we examined the presence of microplastics in the digestive tracts of S. serrata collected from the Kota mangroves, southwestern coast of India. Our analysis revealed the presence of 264 MPs in all the samples with an average (± standard deviation) of 29.33 (±11.53) MPs/Individual. The most dominant categories were fibres (98.86 %) and fragments (1.14 %). Primarily 0.1-0.3 mm (50.90 %) and 0.3-1 mm (37.65 %) size range dominated. The predominant polymers were polypropylene (33.71 %), high-density polyethylene (31.44 %), and polyethylene terephthalate (17.80 %). Scanning electron microscopy revealed extensive weathering on the surface of the microplastics. Risk assessments indicated severe risks to S. serrata due to microplastic ingestion emphasizing the need to protect delicate ecosystems like mangroves and the biota within.

Unraveling the threat: Microplastics and nano-plastics' impact on reproductive viability across ecosystems

Plastic pollution pervades both marine and terrestrial ecosystems, fragmenting over time into microplastics (MPs) and nano-plastics (NPs). These particles infiltrate organisms via ingestion, inhalation, and dermal absorption, predominantly through the trophic interactions. This review elucidated the impacts of MPs/NPs on the reproductive viability of various species. MPs/NPs lead to reduced reproduction rates, abnormal larval development and increased mortality in aquatic invertebrates. Microplastics cause hormone secretion disorders and gonadal tissue damage in fish. In addition, the fertilization rate of eggs is reduced, and the larval deformity rate and mortality rate are increased. Male mammals exposed to MPs/NPs exhibit testicular anomalies, compromised sperm health, endocrine disturbances, oxidative stress, inflammation, and granulocyte apoptosis. In female mammals, including humans, exposure culminates in ovarian and uterine deformities, endocrine imbalances, oxidative stress, inflammation, granulosa cell apoptosis, and tissue fibrogenesis. Rodent offspring exposed to MPs experience increased mortality rates, while survivors display metabolic perturbations, reproductive anomalies, and weakened immunity. These challenges are intrinsically linked to the transgenerational conveyance of MPs. The ubiquity of MPs/NPs threatens biodiversity and, crucially, jeopardizes human reproductive health. The current findings underscore the exigency for comprehensive research and proactive interventions to ameliorate the implications of these pollutants.

How can contamination be prevented during laboratory analysis of atmospheric samples for microplastics?

Microplastics (MPs) in the air and indoor environments are of growing concern and have led to increased testing for MPs. This study draws attention to the quality and quantitative measures of MP studies by conducting laboratory experiments (on solutions, filters, and blank samples) that were rarely or were not adopted in the airborne and indoor MP literature. Experiments have been conducted to identify contaminations that may come from experimental procedures while determining MPs in the air samples. MPs in different matrices during experiments were counted and categorized by their shapes. Chemical characterization was performed by Raman Spectroscopy. Results showed that laminar flow is the best option over a fume hood or standard laboratory environment for detecting air MPs to reduce blank levels. Blue-green and Black-Grey were the dominant colors; fiber was the predominant type of MPs seen, and most of them fall under the size range from (1-1000 µm) in different indoor environments and blanks. Common MPs seen were PP, PVA, PTFE, PVC, and HDPE. Thermal treatment of fresh unused filters at 450 °C for 4 h was effective as it reduced the MP count by 50%. Working solutions are mainly contaminated, and their pre-filtration is essential. The average deposition of MPs in blank samples during seven days was around 55 MPs. There is an urgent need for studies on developing quality control and quality assurance of airborne and indoor MPs. Hence, a standard protocol needs to be accepted; by harmonizing procedures, comparable results can be found, uncovering the correct levels of MP contamination, as required for risk assessment.

Analysis of microplastics in ships ballast water and its ecological risk assessment studies from the Persian Gulf

Transport of ballast water is considered a significant vector for dispersion of different pollutants, including microplastics (MPs), throughout the world's oceans. However, there is limited information on MPs in ballast water. Size distribution, polymer type, and ecological risks of MPs in ballast water were investigated for the first time in this study. The mean levels of MPs in ballast water and seawater samples were 12.53 and 11.80 items/L, respectively. MPs with a size category of 50-300 μm was the most abundant. Fiber, black, and polycarbonate (PC) were the predominant shape, color, and polymer type of identified MPs in ballast water and seawater, respectively. The pollution load index (PLI), hazard index (HI), and risk quotient (RQ) indicated high levels of MP pollution, potentially indicating an ecological risk. These findings increase our understanding of the major sources (such as ballast water), transportation routes, and related ecological risks of MPs to marine ecosystems.

Microplastic particles in river sediments and water of southwestern Nigeria: insights on the occurrence, seasonal distribution, composition, and source apportionment

Microplastics (MPs) are globally recognized as an emerging environmental threat, particularly in the aquatic environment. This study presents baseline data on the occurrence and distribution of MPs in sediments and surface water of major rivers in southwestern Nigeria. Microplastics were extracted by density separation and polymer identification using Fourier transformed infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR). The abundance of MPs in surface sediment and water samples across all locations ranged from 12.82 to 22.90 particle/kg dw and 6.71 to 17.12 particle/L during the dry season and 5.69 to 14.38 particle/kg dw and 12.41 to 22.73 particle/L during the wet season, respectively. On average, fiber constituted the highest percentage of MP in sediments (71%) and water (67%) while foam accounted for the lowest values of 0.6% and 1.7%, respectively. Polypropylene (PP) and polyethylene (PE) were the main MPs across all locations based on Fourier transform infrared spectroscopy (FTIR). MPs of size < 1 mm were the most abundant (≥ 55%) on average in both water and sediments. The study identified run-off from human activities and industrial wastewater as potential sources of MP exposure based on positive matrix factorization. The study suggests assessing the impact of different land-use activities on MPs occurrence and distribution in addition to quantifying MPs in seafood as a way forward in food safety management systems for further studies. This study confirmed the occurrence and widespread distribution of MPs in surface water and sediments and provides a database on MP pollution in Nigeria.

Microplastics in mangroves with special reference to Asia: Occurrence, distribution, bioaccumulation and remediation options

Microplastics (MPs) are a new and lesser-known pollutant that has intrigued the interest of scientists all over the world in recent decades. MP (<5mm in size) can enter marine environments such as mangrove forests in a variety of ways, interfering with the health of the environment and organisms. Mangroves are now getting increasingly exposed to microplastic contamination due to their proximity to human activities and their position as critical transitional zones between land and sea. The present study reviews the status of MPs contamination specifically in mangrove ecosystems situated in Asia. Different sources and characteristics of MPs, subsequent deposition of MPs in mangrove water and sediments, bioaccumulation in different organisms are discussed in this context. MP concentrations in sediments and organisms were higher in mangrove forests exposed to fishing, coastal tourism, urban, and industrial wastewater than in pristine areas. The distribution of MPs varies from organism to organism in mangrove ecosystems, and is significantly influenced by their morphometric characteristics, feeding habits, dwelling environment etc. Mangrove plants can accumulate microplastics in their roots, stem and leaves through absorption, adsorption and entrapment helping in reducing abundance of microplastic in the surrounding environment. Several bacterial and fungal species are reported from these mangrove ecosystems, which are capable of degrading MPs. The bioremediation potential of mangrove plants offers an innovative and sustainable approach to mitigate microplastic pollution. Diverse mechanisms of MP biodegradation by mangrove dwelling organisms are discussed in this context. Biotechnological applications can be utilized to explore the genetic potential of the floral and faunal species found in the Asian mangroves. Detailed studies are required to monitor, control, and evaluate MP pollution in sediments and various organisms in mangrove ecosystems in Asia as well as in other parts of the world.

Microplastic contamination in water and sediments of Mahanadi River, India: An assessment of ecological risk along rural-urban area

Worldwide, environmental concerns about MPs pollution have increased. Microplastic contamination that pollutes the ocean is mostly caused by terrestrial transfer from close proximity locations. A study of MPs pollution near coastal locations becomes necessary to address the MPs transit, fate, and mitigation. In the current study MPs pollution in the surface water and sediment of the Mahanadi River estuary was assessed during Pre-MS and MS. The size, shape, and colour of the MPs were determined using a stereomicroscope, and the MPs polymer composition was identified by Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy. The mean concentration of MPs that were potentially discovered in water was 16.6 ± 5.2 and sediments 197.3 ± 5.4 during Pre-MS. In the MS observed mean abundance of MPs was 15.1 ± 5.4 in water and 164.6 ± 76.9 in sediments. The highest abundant size was smaller than 1 mm; the most prevalent shape were fibers followed by film and fragments; black and white was a prominent colour in water and sediments respectively. Polyesters (PEs), polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), polyamide (PA), Polystyrene (PS), and Polycarbonates (PC) were found in the analysis of the chemical composition of MPs in water and sediments samples. The calculated PLI value shows pollution load at category I, with polymer hazard levels at categories III, IV, and V, indicating very high risk. The current research results show that river inflows and fishing-related actions are probably the main causes of MPs pollution.

Biodegradation of polyethylene terephthalate (PET) by diverse marine bacteria in deep-sea sediments

PET plastic waste entering the oceans is supposed to take hundreds of years to degrade and tends to accumulate in the deep sea. However, we know little about the bacteria capable of plastic degradation therein. To determine whether PET-degrading bacteria are present in deep-sea sediment, we collected the samples from the eastern central Pacific Ocean and initiated microbial incubation with PET as the carbon source. After enrichment with PET for 2 years, we gained all 15 deep-sea sediment communities at five oceanic sampling sites. Bacterial isolation for pure culture and further growth tests confirmed that diverse bacteria possess degradation ability including Alcanivorax xenomutans BC02_1_A5, Marinobacter sediminum BC31_3_A1, Marinobacter gudaonensis BC06_2_A6, Thalassospira xiamenensis BC02_2_A1 and Nocardioides marinus BC14_2_R3. Furthermore, four strains were chosen as representatives to reconfirm the PET degradation capability by SEM, weight loss and UPLC-MS. The results showed that after 30-day incubation, 1.3%-1.8% of PET was lost. De-polymerization of PET by the four strains was confirmed by the occurrence of the PET monomer of MHET and TPA as the key degradation products. Bacterial consortia possessing PET-degrading potential are prevalent and diverse and might play a key role in the removal of PET pollutants in deep oceans.

The impact of microplastics on bivalve mollusks: A bibliometric and scientific review

Bivalves are important members of the ecosystem and their populations are declining globally, making them a concern for their role in ecosystem services and the fishing industry. Bivalves are excellent bioindicators of MPs pollution due to their widespread distribution, filtering capabilities, and close association with human health. Microplastics (MPs) have direct and indirect impacts on bivalves, affecting their physiology, habitat structure, food sources, and persistence of organic pollutants. This review provides an extensive overview of the impact of MPs on bivalves, covering various aspects such as their economic significance, ecological roles, and importance in biomonitoring environmental quality. The article presents the current state of knowledge on the sources and pathways of MPs in aquatic environments and their effects on bivalves. The mechanisms underlying the effects of MPs on bivalves, including ingestion, filtration activity, feeding inhibition, accumulation, bioaccumulation, and reproduction, are also discussed. Additionally, a bibliometric analysis of research on MPs in bivalves is presented, highlighting the number of papers, geographical distribution, and keyword clusters relating to MPs. Finally, the review emphasizes the importance of ongoing research and the development of mitigation strategies to reduce the negative effects of MPs pollution on bivalves and their habitats in oceans and coastal waters.

Occurrence and spatial distribution of microplastics in the intertidal sediments along the Oman Sea

Microplastics (MPs) have been found in marine systems more frequently. We aim to analyze the MPs abundances, distribution, and characteristics in the intertidal sediments along the Oman Sea. Samples were collected from 7 locations with three replicates. Density separation was used to extract MPs, which were then visually counted and categorized based on their size, shape, and color. MPs abundance ranged between 219.6 ± 38.3 particles.kg-1dw and 617.3 ± 99.9 particles.kg-1dw with a mean abundance of 315.4 ± 24.4 particles.kg-1 dw. Fragments and fibers were the dominant shapes. Red and blue colors were observed in 61.6 % of the collected MPs. In addition, 100-500 μm size range of MPs were more abundant. Micro-Raman spectroscopy analysis revealed polypropylene was the major polymer constituent. The present study revealed the widespread occurrence of MPs as anthropogenic pollutants throughout the Oman Sea and highlighted the urgent need for regulations and policies to reduce the entry of this material into marine environments.

Microplastic-sorbed persistent organic pollutants in coastal Mediterranean Sea areas of Tunisia

Microplastics (MPs) are emerging pollutants of global concern due to their pervasiveness, high sorption ability for persistent organic pollutants (POPs) and direct and indirect toxicity to marine organisms, ecosystems, as well as humans. As one of the major coastal interfaces, beaches are considered among the most affected ecosystems by MPs pollution. The morphological characteristics of MPs (pellets and fragments) collected from four beaches along the Tunisian coast and sorbed POPs, including polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), were investigated in this study. The results showed that the MPs varied greatly in color, polymer composition and degradation degree. The color varied from colored to transparent and the most prevalent polymer identified using Raman spectroscopy was polyethylene. Scanning electron microscope (SEM) images exhibited various surface degradation features including cavities, cracks, attached diatom remains, etc. The concentrations of Σ12PCBs over all beaches ranged from 14 to 632 ng g-1 and 26 to 112 ng g-1 in the pellets and fragments, respectively, with a notable presence and dominance of highly-chlorinated PCBs such as CB-153 and -138. Among the OCPs, γ-HCH is the only compound detected with concentrations ranging from 0.4 to 9.7 ng g-1 and 0.7 to 4.2 ng g-1 in the pellets and fragments, respectively. Our findings indicate that MPs found on the Tunisian coast may pose a chemical risk to marine organisms as the concentrations of PCBs and γ-HCH in most of the analysed samples exceeded the sediment-quality guidelines (SQG), especially the effects range medium (ERM) and the probable effects level (PEL). As the first report of its kind, the information gathered in this study can serve as the baseline and starting point for future monitoring work for Tunisia and neighbouring countries, as well as for stakeholders and coastal managers in decision-making processes.

Distribution of microplastics in upstream and downstream surface waters of the Iranian rivers discharging to the southern Caspian Sea

Microplastic pollution in the riverine ecosystems has caught many attentions in the scientific literatures. However, little information is available about the abundance and distribution of microplastics of the rivers discharging to the Caspian Sea. The aim of this study was to assess the spatial and seasonal distribution of microplastics in the surface waters of thirteen rivers discharging to the southern Caspian Sea. Microplastics were found in all stations with uneven distributions. The average concentrations of microplastics in the stations during snowmelt and dry seasons were 1.406 ± 0.1380 microplastics/m3 and 0.4070 ± 0.01500 microplastics/m3, respectively. Positive gradients of the rivers microplastics concentration from upstream to downstream were found. White/transparent polyethylene (PE) particles with the shape of fragment/film and the length (L) of ≤ 1 mm were the most common microplastics in the surface waters of the rivers discharging to the southern Caspian Sea. Also, the mean concentration of microplastics in spring snowmelt and runoff period was 3.45 times higher than in dry period. Factors such as sewage and household wastes; landfills; and recreational-tourism, fishing and agricultural activities along the rivers may contribute to microplastic contamination in downstream stations. Our data provide baseline information of microplastics in surface waters of rivers discharging to the southern Caspian Sea.

A meta-analytic review of microplastic pollution in the Indian Ocean: Ecological health and seafood safety risk implications

The Indian Ocean (IO) currently bears the second largest plastic load and therefore, has a high potential for microplastic (MP) pollution. Despite the findings from individual studies, the overall MP pollution in the IO is still unclear. Therefore, this meta-analytic review aimed to identify the overall MP contamination state, its ecological health and seafood safety risk implications, and identify future priority areas for MP research in the IO. The data for the occurrence of MPs in seawater, sediment and marine biota in the IO were analysed. Concentrations of MPs in surface water and sediment were in a wide range (surface water: 0.01 to 372,000.00 particles per m³; sediment: 36.80 to 10,600.00 items per kg, respectively) while lower range (0.016 to 10.65 particles per individual) was observed in biota. The meta-analysis indicated that PE was the most abundant polymer type in all three matrices and PE prevalence was higher in sediment. Fibres were the most prevalent MP shape of all three matrices in the IO. The Higher MP accumulation was identified in shrimps (p < 0.05) than the fish species. Results further confirmed that MPs do not magnify along the food chain (p > 0.05). Ecological risk and hazardous effects increased with the presence of polyvinyl chloride (PVC), polyurethane (PUR) and PA due to their high hazardous scores. Overall results indicated that IO is in the high-risk category due to the elevated levels of MP pollution with reference to all three matrices.

Risk assessments of microplastics accumulated in estuarine sediments at Cuddalore, Tamil Nadu, southeast coast of India

In this study, the abundance of microplastics (MPs) in the Uppanar and Gadilam estuaries in Cuddalore, on the southeast coast of India, is reported. In the estuarine sediments, MP abundance ranged from 36.3 ± 3.39 to 51.6 ± 2.05 particles/Kg dw. Different types of MP shapes, such as fibers (41.7-47.9%), films (21.2-27.2%), and fragments (18.3-25.5%) were observed in the size range of 100-1000 µm. Diverse colours of MPs were observed, among which red (30.1-34.5%) was predominantly noticed in the estuarine sediments. Six polymers were identified by µ-FTIR, among which LDPE (39%) and PP (35%) were dominant. MPs pollution in these estuaries is composed of domestic, industrial, and fishing wastes. Risk assessments show that the area falls under hazard categories I to III, indicating low to high risk. This study improves knowledge on MPs contamination in Uppanar and Gadilam estuaries and provides impetus for further research to identify the actual sources and impacts of MPs on aquatic systems along the east coast of India.

Microplastics in coastal blue carbon ecosystems: A global Meta-analysis of its distribution, driving mechanisms, and potential risks

Microplastics, as emerging pollutants, have become a global environmental concern. Blue carbon ecosystems (BCEs) are threatened by microplastics. Although substantial studies have explored the dynamics and threats of microplastics in BCEs, the fate and driving factors of microplastics in BCEs on a global scale remain largely unknown. Here, the occurrence, driving factors, and risks of microplastics in global BCEs were investigated by synthesizing a global meta-analysis. The results showed that the abundance of microplastics in BCEs has notable spatial differences worldwide, with the highest microplastic concentrations in Asia, especially in South and Southeast Asia. Microplastic abundance is influenced by the vegetation habitat, climate, coastal environment, and river runoff. The interaction of geographic location, ecosystem type, coastal environment, and climate enhanced the effects of microplastic distribution. In addition, we found that microplastic accumulation in organisms varied according to feeding habits and body weight. Significant accumulation was observed in large fish; however, growth dilution effects were also observed. The effect of microplastics on the organic carbon content of sediments from BCEs varies by ecosystem; microplastic concentrations do not necessarily increase organic carbon sequestration. Global BCEs are at a high risk of microplastic pollution, with high microplastic abundance and toxicity driving the high pollution risk. Finally, this review provides scientific evidence that will form the basis for future microplastic research, focusing on the transport of microplastics in BCEs; effects on the growth, development, and primary productivity of blue carbon plants; and soil biogeochemical cycles.

Preliminary Study on the Role of Mangroves in Entrapping Microplastics in Tuticorin Coast of Gulf of Mannar, Southeast Coast of India

Mangroves constitute a unique and important type of coastal wetlands in tropical and subtropical zones worldwide. The abundance of microplastics (MPs) in the mangrove sediments is poorly understood. This study aimed to quantify the role of mangrove root systems in effectively entrapping MPs in the mangrove areas of Tuticorin and Punnakayal Estuary. It investigated the abundance, characteristics, and weathering patterns of MPs in different mangrove sediments. Sediment samples were collected from ten mangrove sites and two control sites without mangroves. Microplastics were extracted from mangrove sediments by density separation method, and then counted and categorized according to their shape, size, and colour. Microplastics were identified in all ten sampling sites. Punnakayal Estuary has a greater MPs concentration (27 ± 2.65 items/kg dw) than Tuticorin (9.33 ± 2.52 items/kg dw). Also, microplastic concentrations are higher in the mangrove sites than in the control sites. Most MPs are fibres with size ranges of 1-2 mm and 2-3 mm dominating. Blue and transparent are the predominant colours. Four polymers were identified, namely polyethylene (PE), polypropylene (PP), polymethyl methaacrylate (PMMA), and polyurethane (PUR). The degree of weathering was confirmed by carbonyl index and the values vary between 0.28 and 1.25 for PE and 0.6 and 1.05 for PP.

Distribution and flux assessment of microplastic debris in the middle and lower Chao Phraya River, Thailand

Microplastic (MP) debris is now a global concern. The Chao Phraya is the largest river in Thailand and transports MPs from terrestrial areas to the ocean. MP debris in its water and sediment were measured in March 2021, September 2021, and March 2022 in five provinces along the watercourse. Hydrological data were also collected to estimate the MP riverine flux between provinces. Size, shape, color, and types of MP polymers were observed, with sedimentation data collected for MP content. Results showed that MPs were found at all sample stations, with average abundance in all province water samples ranging from 0.54 ± 0.05 to 1.07 ± 0.28 pieces/L, while in sediment sample, numbers ranged from 183.84 ± 38.76 to 546.18 ± 86.84 pieces/kg dry weight throughout all seasons. Overall contamination and accumulation were similar between provinces but significantly different between seasons. Sizes of MPs in water varied between seasons with MPs in sediment mostly 330-5,000 μm (Kruskal-Wallis, P < 0.05). Sedimentation of MPs was different between seasons (Kruskal-Wallis, P < 0.05). The highest MP flux values discharged from Samut Prakan Province to the inner Gulf of Thailand were 1.83 × 10⁵ and 1.60 × 10⁵ million items/day in September 2021 and March 2022, respectively.

Spatio-temporal evaluation and risk assessment of microplastics in nearshore surface waters post-2018 Kerala deluge along the southwest coast of India

Spatial and temporal distribution of microplastics along the nearshore surface waters of Kerala after the floods of 2018 was studied. Results indicated a seven-fold increase in its mean concentration (7.14 ± 3.03 items/m³) post deluge. The average abundance was highest during pre-monsoon (8.27 ± 3.09 items/m³). Fibres were the dominant group, with blue and black being the most prevalent colours. Polyethylene and polypropylene were the most commonly found polymers, possibly gaining entry through sewage waste or land-based plastic litter. Highest abundance of microplastic was recorded off Kochi categorising it at Hazard Level I under Pollution Load Index assessment. Similarly high levels of Pollution Hazard Index and Potential Ecological Risk Index were also reported due to the presence of hazardous polymers PVC and PU that can cause concern to marine life. The differential weathering pattern and surface morphology analysis suggested microplastics to be relatively old that had undergone substantial mechanical and oxidative weathering.

Estimation of the age of polyethylene microplastics collected from oceans: Application to the western North Pacific Ocean

The knowledge of microplastic (MP) age could aid the deduction of the origin and fate of a fragment carried by ocean currents over long time periods and distances. The present study developed a novel method to estimate the age of MPs (i.e., UV radiation exposure time) using the oxidation level of polyethylene (i.e., carbonyl index) from infrared spectrometry, ultraviolet erythemal radiation (UVER) data, and ambient seawater temperatures. Accelerated and outdoor exposure experiments were conducted to establish relationships among the temporally integrated UVER, ambient temperature, and carbonyl index. Thereafter, the age of MPs was computed, with Miyakojima Island serving as the reference location. The estimated ages of MPs collected from the western North Pacific Ocean ranged from 1 to 3 years, and those MPs from nearshore waters ranged from 0 to 5 years.

Microplastics in coastal and oceanic surface waters and their role as carriers of pollutants of emerging concern in marine organisms

Microplastics (Mps) pose a significant environmental challenge with global implications. To examine the effect of Mps on coastal and oceanic surface waters, as well as in marine organisms, 167 original research papers published between January 2013 and September 2022 were analyzed. The study revealed an unequal distribution of research efforts across the world. Fragments and fibers were the most frequently detected particles in ocean surface waters and marine biota, which mainly consisted of colored and transparent microparticles. Sampling of Mps was primarily done using collecting nets with a mesh size of 330 μm. Most articles used a stereomicroscope and Fourier-Transform Infrared spectroscopy for identification and composition determination, respectively. Polyethylene and polypropylene were the most frequent polymers found, both in coastal waters and in marine organisms. The major impact observed on marine organisms was a reduction in growth rate, an increase in mortality, and reduced food consumption. The hydrophobic nature of plastics encourages the formation of biofilms called the "plastisphere," which can carry pollutants that are often toxic and can enter the food chain. To better define management measures, it is necessary to standardize investigations that assess Mp pollution, considering not only the geomorphological and oceanographic features of each region but also the urban and industrial occupation of the studied marine environments.

Seasonal distribution of microplastics in surface waters of the Northern Indian Ocean

Seven expeditions were carried out during pre-monsoon, monsoon and post monsoon in 2018-2019 for marine plastic collection in surface waters of Northern Indian Ocean. PE and PP (83 %) is the dominant type of polymer found in the surface waters. Colored particles account for 67 % of all particles, with fibre/line accounting for 86 %. The average (Mean ± SD) microplastics concentration in the Northern Indian Ocean during pre-monsoon is 15,200 ± 7999 no./km², Monsoon is 18,223 ± 14,725 no./km² and post monsoon is 72,381 ± 77,692 no./km². BoB during pre-monsoon and post monsoon the microplastic concentration remains same except in the northern BoB this change is caused due to weak winds. Microplastics concentration varied both spatially, temporal and heterogeneity in nature. These differences are caused by effect of wind and seasonal reversal of currents. Microplastics collected in the anticyclonic eddy are 129,000 no./km².

Distribution and risk assessment of microplastics in typical ecosystems in the South China Sea

Microplastic pollution in the marine environment has attracted worldwide attention. The South China Sea is considered a hotspot for microplastic pollution due to the developed industries and high population density around the South China Sea. The accumulation of microplastics in ecosystems can adversely affect the health of the environment and organisms. This paper reviews the recent microplastic studies conducted in the South China Sea, which novelty summarizes the abundance, types, and potential hazards of microplastics in coral reef ecosystems, mangrove ecosystems, seagrass bed ecosystems, and macroalgal ecosystems. A summary of the microplastic pollution status of four ecosystems and a risk assessment provides a more comprehensive understanding of the impact of microplastic pollution on marine ecosystems in the South China Sea. Microplastic abundances of up to 45,200 items/m³ were reported in coral reef surface waters, 5738.3 items/kg in mangrove sediments, and 927.3 items/kg in seagrass bed sediments. There are few studies of microplastics in the South China Sea macroalgae ecosystems. However, studies from other areas indicate that macroalgae can accumulate microplastics and are more likely to enter the food chain or be consumed by humans. Finally, this paper compared the current risk levels of microplastics in the coral reef, mangrove, and seagrass bed ecosystems based on available studies. Pollution load index (PLI) ranges from 3 to 31 in mangrove ecosystems, 5.7 to 11.9 in seagrass bed ecosystems, and 6.1 to 10.2 in coral reef ecosystems, respectively. The PLI index varies considerably between mangroves depending on the intensity of anthropogenic activity around the mangrove. Further studies on seagrass beds and macroalgal ecosystems are required to extend our understanding of microplastic pollution in marine environments. Recent microplastic detection in fish muscle tissue in mangroves requires more research to further the biological impact of microplastic ingestion and the potential food safety risks.

Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA)

The ubiquitous nature of microplastics (MPs) in nature and the risks they pose on the environment and human health have led to an increased research interest in the topic. Despite being an area of high plastic production and consumption, studies on MPs in the Middle East and North Africa (MENA) region have been limited. However, the region witnessed a research surge in 2021 attributed to the COVID-19 pandemic. In this review, a total of 97 studies were analyzed based on their environmental compartments (marine, freshwater, air, and terrestrial) and matrices (sediments, water columns, biota, soil, etc.). Then, the MP concentrations and polymer types were utilized to conduct a risk assessment to provide a critical analysis of the data. The highest MP concentrations recorded in the marine water column and sediments were in the Mediterranean Sea in Tunisia with 400 items/m³ and 7960 items/kg of sediments, respectively. The number of MPs in biota ranged between 0 and 7525 per individual across all the aquatic compartments. For the air compartment, a school classroom had 56,000 items/g of dust in Iran due to the confined space. Very high risks in the sediment samples (Erⁱ > 1500) were recorded in the Caspian Sea and Arab/Persian Gulf due to their closed or semi-closed nature that promotes sedimentation. The risk factors obtained are sensitive to the reference concentration which calls for the development of more reliable risk assessment approaches. Finally, more studies are needed in understudied MENA environmental compartments such as groundwater, deserts, and estuaries.

Characterization of microplastic pollution in the Pasur river of the Sundarbans ecosystem (Bangladesh) with emphasis on water, sediments, and fish

An emerging concern of today's world, due to their universal dispersion worldwide, is the environment's microplastic pollution. The Sundarbans, the world's largest mangrove, have unique and dynamic environmental settings with numerous pollution risk exposures, including microplastics (MPs). Thus, the present study has focused on the MP pollution in water, sediment, and fish samples of the Sundarbans of Bangladesh for the first time. Water and sediment samples were collected (n = 30/each) from sampling locations along the Pasur river (Bangladesh). Furthermore, nine species of fish samples were collected from a local fish market situated at the Mongla port. Results show that 100 % of the analyzed samples have evidence of MPs. On average, 2.66 × 10³ plastic particles/L and 1.57 × 10⁵ particles/kg were found in water and sediment samples, respectively. Furthermore, results show a higher number of MPs in the animals' gastrointestinal tract (GIT) (10.41 particles/g), concerning the average concentration recorded in the muscles (4.68 particles/g). O. pama and H. nehereus were the species that showed the highest MPs accumulation in the GIT. In the muscles, the highest MP levels were observed in T. ilisha and L. calcarifer. Most of the particles were smaller than 1 mm; black-colored particles dominated the pool. FT-IR analysis revealed the presence of seven polymer types where polyamide was abundant in water and sediment samples. SEM analysis showed morphological structures and adsorbed particles on the surface of plastic samples, and the spatial distribution of MPs indicates that the location with high human intervention has elevated levels of MPs. Therefore, our study demonstrates that Sundarbans mangrove forests are highly contaminated with MPs and that its fisheries can be a potential source of human exposure to these pollutants.

Microplastic occurrence in finfish and shellfish from the mangroves of the northern Gulf of Oman

This study was conducted to assess microplastic (MP) pollution in some aquatic animals inhabiting planted and natural mangrove swamps in the northern Gulf of Oman. The KOH-NaI solution was used to retrieve MPs from the gastrointestinal tracts of animals. The highest MP prevalence was recorded in crabs (41.65 %) followed by fish (33.89 %) and oysters (20.8 %). The abundance of MPs in examined animals varied from zero in Sphyraena putnamae to 11 particles in a Rhinoptera javanica specimen. When polluted-only animals were considered, the mean abundance of MPs significantly varied among species and between locations. The mean density of ingested MPs was higher in the planted mangrove animals (1.79 ± 2.89 vs. 1.21 ± 2.25 n/individual; mean ± SD). Among the examined fish species, R. javanica ingested the highest number of MPs (3.83 ± 3.93 n/individual; mean ± SD). The polyethylene/ polypropylene fragments or fibers of average 1900 μm size were recorded as predominant (>50 % occurrence) MP particles.

Zooplankton exposure to microplastic contamination in a estuarine plume-influenced region, in Northeast Brazil

This work describes the spatio-temporal distribution of suspected plastic and microplastic (MP) particles in estuarine plumes and analyzes the microplastic/zooplankton ratio. Subsurface hauls with a conical-cylindrical net were deployed in the coastal area of Tamandare (Pernambuco, Brazil), covering the plume of two rivers and a bay adjacent to coral reefs. A total of 2079 suspected plastic particles were detected, mostly fibers and fragments (>60%). Organic matter digestion was made using a 30% hydrogen peroxide solution, of which approximately 50% of suspected particles were validated as MPs. The average MP abundance was significantly higher during the high rainfall season (53.8 ± 89.6 and 18.8 ± 32.3 particles/m³, respectively), with higher values registered in the plume area (108.9 ± 158.5 and 44.6 ± 55.5 particles/m³). Polymer identification using FT-IR confirmed that suspected particles were mainly polypropylene, polyamide, and polyurethane. These results confirm the hypothesis of a temporal transport variation of MPs from the river to the coastal environments, particularly since the plume influences debris input. Eleven animal phyla were identified, and the subclass Copepoda was predominant (90%), particularly the nauplius stage (70%). Over 70% of verified MPs range between 20 and 2000 μm, equivalent to the most common size of zooplanktonic organisms. Results support that coastal areas near estuarine plumes are exposed to microplastic contamination, affecting species dependent on zooplankton in marine coastal food webs.

First evidence of meso- and microplastics on the mangrove leaves ingested by herbivorous snails and induced transcriptional responses

Although evidence suggests the ubiquity of meso- and microplastics (MMPs) in mangrove forests, our knowledge of their bioavailability and risk on mangrove leaves is scarce. Here, we investigated MMP contamination concerning submerged mangrove leaves and herbivorous snails that mainly feed on them from the four mangrove forests located in Beibu Gulf, Guangxi Province, China. Results showed that the MMP abundance on the mangrove leaves ranged from 0.01 ± 0.00 to 0.42 ± 0.15 items cm^-2, while it ranged from 0.33 ± 0.21 to 6.20 ± 2.91 items individual^-1 in the snails. There were significant positive correlations between snails and leaves regarding the abundance of total MMPs and the proportions of MMPs with the same characteristics. Expanded polystyrene (EPS) that mainly derived from aquaculture rafts, accounted for a major component both on the leaves and in the snails in Shi Jiao (SJ). Both the detection frequency and percentage of larger EPS (2.00-17.50 mm) on the leaves in SJ were higher than other sites. Meanwhile, the detection frequency, abundance and percentage of larger EPS on the leaves had significant positive correlations with those of micro-EPS in the snails. These findings suggested that mangrove leaves may represent a viable pathway for MMPs to enter the herbivorous snails. Larger EPS with higher frequency of occurrence on mangrove leaves were more likely to be encountered and ingested by snail considering its opportunistic feeding behavior. In addition, 11 sensitive genes involved in the processes of metabolism, intestinal mucosal immune systems, and cellular transduction in the snails were significantly suppressed by MMP exposure, which may be potentially used as early biomarkers to indicate the biological effects of MMPs under realistic environmental conditions. Overall, this study provides novel insights into the fate, sources, and biological effects of MMPs on mangrove leaves.

Microplastic levels on sandy beaches: Are the effects of tourism and coastal recreation really important?

This study assessed the effect of tourism and other recreational activities on microplastic (MP) levels and their characteristics in the sand and surf zone of the seawater. Six sites were chosen belonging to three sandy beaches with similar geomorphologic and morphodynamic characteristics but with different tourism activities. On average, a concentration of 1133.3 ± 811.3 items/kg dry weight (d.w.) and 12.7 ± 14.9 items/m³ were found in the sand and seawater samples, respectively. Fibers and films predominated and were less than 1 mm in length. In the sand, the films mainly matched the PE polymer spectra and the fibers matched PET polymer, cotton, and indigo blue dye; in the seawater samples, PP films and PET fibers prevailed. At the Pehuén-Co - Monte Hermoso Coastal Marine MPA where the flow of tourists is low, the MP levels were the lowest and the largest particles were found, mainly blue or black fibers, with less polymer diversity, cotton and PET being the most prevalent suggesting a recent input of textile fibers to this site. Moreover, the highest concentration of MPs was found on the southern site of a beach considered to be more pristine due to negligible human activity, including the smallest size pattern, mostly composed of white films or fibers with a greater diversity of polymers, predominantly PE > PET > PP. A great occurrence of PVC white films was also found in the surf zone at this site. Proximity to the mouth of a river, littoral drift, and other point sources were identified as the main sources, indicating that, apart from the local tourism and recreational activities, other sources might play a major role in the input of MPs to sandy beaches, such as extensive/intensive agricultural land use and irrigation areas.

Sources and hotspots of microplastics of the rivers ending to the southern Caspian Sea

The occurrence of microplastics (MPs) in beach sediments of the southern Caspian Sea was well documented, however, there are still many unknowns about the abundances and distributions of MPs in the rivers ending to the Caspian Sea. Here, bank sediments of 26 sites in the thirteen rivers were surveyed in two seasons. However, there was not any significant difference (p > 0.05) between the concentrations of MPs during the two seasons. MPs were detected in all samples with mean concentrations of 214.08 ± 14.35 MPs/kg. The most common size, shape, color, and polymer types of MPs were L < 300 μm, fragment/film, white/transparent, and polystyrene (PS), respectively. In all rivers, positive MP gradients from upstream to downstream were observed. Maximum concentrations of MPs were found in the downstream parts of Chalus, Haraz, and Safarud rivers. Recreational-tourism and fishing activities had significant positive relationships (p < 0.05) with concentration of MPs in the rivers.

Microplastics in water systems: A review of their impacts on the environment and their potential hazards

Microplastics, the microscopic plastics, are fragments of any type of plastic that are being produced today as plastic waste originating from anthropogenic activities. Such microplastics are discharged into the environment, and they enter back into the human body through different means. The microplastics spread in the environment due to environmental factors and the inherent properties of microplastics, such as density, hydrophobicity, and recalcitrance, and then eventually enter the water environment. In this study, to better understand the behavior of microplastics in the water environment, an extensive literature review was conducted on the occurrence of microplastics in aquatic environments categorized by seawater, wastewater, and freshwater. We summarized the abundance and distribution of microplastics in the water environment and studied the environmental factors affecting them in detail. In addition, focusing on the sampling and pretreatment processes that can limit the analysis results of microplastics, we discussed in depth the sampling methods, density separation, and organic matter digestion methods for each water environment. Finally, the potential hazards posed by the behavior of aging microplastics, such as adsorption of pollutants or ingestion by aquatic organisms, due to exposure to the environment were also investigated.

Transboundary microplastic pollution in Xiamen Bay and adjacent Jiulong River estuary after the outbreak of COVID-19

Land-based transport from nearshore areas is a key pathway of microplastic (MP) pollution in the oceans. Therefore, transport, fate, and intervention on MPs necessitate an investigation of MP contamination in coastal regions. Here, MP pollution in the surface waters of Xiamen Bay and Jiulong River estuary was evaluated in 2021 after the outbreak of COVID-19. The abundance of MPs in Xiamen Bay ranged from 0.20 to 5.79 items m^-3 with an average of 1.03 items m^-3, whereas that in the Jiulong River estuary spanned from 0.55 to 2.11 items m^-3 with a mean of 1.30 items m^-3. A yearly decreasing trend in the abundance of MPs in surface waters in both regions was observed. The particle sizes of MPs were concentrated in the range of 2.50-5.00 mm, and the colors were mainly white, transparent, and green. The micro-Raman spectroscopic results showed that MP polymer types were predominantly polyethylene, polypropylene, and polystyrene. A lower abundance of MPs in Xiamen Bay with no obvious pattern was observed, while that in the Jiulong River estuary showed a wavelike distribution from upstream to downstream. Ecological risk assessment of MP pollution in surface waters of two regions was performed using the pollution load index (PLI), giving the risk level in descending order: wastewater discharge area > aquaculture area > sloughs > estuary mouth > estuarine rivers > shipping lane. The average risk level of Xiamen Bay (I) was lower than that in Jiulong River estuary (II). The MP pollution in the Jiulong River estuary appeared heavier than that in Xiamen Bay, which may be due to the combined effects of COVID-19 and marine governance. This study provided insights into the prevention and management of MP pollution in nearshore semi-enclosed bays.

Impact of coastal wastewater treatment plants on microplastic pollution in surface seawater and ecological risk assessment

This study aims to understand the influence of wastewater treatment plant discharge on the microplastic status in the surface seawater of Istanbul. For this purpose, for the first time, the distribution, composition, and ecological risk of microplastics at nine sampling stations on the southern coast of Istanbul, Marmara, were investigated at monthly intervals over a one-year period. The results showed that the microplastic abundance ranged from 0 to over 1000 particles per liter. Fibers were the dominant form at all stations. Microplastics 249-100 μm were the dominant size, and transparency was the color most found at all stations. Polyethylene and ethylene-vinyl acetate were the major types of microplastics, accounting for 50% overall. The pollution load index revealed that over 70% of sampling stations were at hazard level I. However, the hazardous index was categorized as level III with a value of 662.3 due to the presence of the most hazardous polymer named polyurethane. Further investigations into the risk assessment of MP can reveal crucial knowledge for understanding the microplastic cycle.

A systematic review on microplastic pollution in water, sediments, and organisms from 50 coastal lagoons across the globe

Coastal lagoons are transitional environments between continental and marine aquatic systems. Globally, coastal lagoons are of great ecological and socioeconomic importance as providers of valuable ecosystem services. However, these fragile environments are subject to several human pressures, including pollution by microplastics (MPs). The aim of this review was to identify and summarize advances in MP pollution research in coastal lagoons across the world. We consider peer-reviewed publications on this topic published in English and Spanish between 2000 and April 21, 2022, available in Scopus and Google Scholar. We found 57 publications with data on MP abundances and their characteristics in 50 coastal lagoons from around the world, 58% of which have some environmental protection status. The number of publications on this type of pollution in lagoons has increased significantly since 2019. Methodological differences amongst studies of MPs in coastal lagoons were nevertheless a limiting factor for wide-ranging comparisons. Most studies (77%) were conducted in single environmental compartments, and integration was limited, hampering current understanding of MP dynamics in such lagoons. MPs were more abundant in lagoons with highly populated shores and watersheds, which support intensive human activities. On the contrary, lagoons in natural protected areas had lower abundances of MPs, mostly in sediments and organisms. Fiber/filament and fragment shapes, and polyethylene, polyester, and polypropylene polymers were predominant. MPs had accumulated in certain areas of coastal lagoons, or had been exported to the sea, depending on the influence of seasonal weather, hydrodynamics, anthropogenic pressures, and typology of MPs. It is advised that future research on MP pollution in coastal lagoons should focus on methodological aspects, assessment/monitoring of pollution itself, MP dynamics and impacts, and prevention measures as part of a sound environmental management.

Potential Adsorption Affinity of Estrogens on LDPE and PET Microplastics Exposed to Wastewater Treatment Plant Effluents

Microplastics (MPs) are among the most common pollutants in the environment. Because of their small size, availability, and similarity to natural foods, they are commonly ingested by marine organisms. They can cause health problems in living organisms due to their bioaccumulation potential. It is, therefore, unknown whether endocrine-disrupting chemicals (EDCs), in particular estrogens, are capable of adhering to the diverse types of MPs found in water. Two MP polymers (low-density polyethylene (LDPE) and polyethene terephthalate (PET)) that could pose a threat to fish were tested for estrogen adsorption. The adsorption capacity of MP pellets was studied for 30 days in the effluent and influent of a wastewater treatment-plant. A laboratory simulation was conducted to validate the field and laboratory findings. We found that the concentrations of five types of estrogen ((diethylstilbestrol (DES), estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinyl estradiol (EE2)) were higher in the influent than the effluent streams. LDPE and PET MPs exposed to influent water in the laboratory had higher estrogen levels than wastewater treatment plants (WWTP) pellets. The PET pellets showed the highest adsorption affinity to EE2, while the LDPE pellets showed the highest affinity to E2. As a result, this study provided baseline data to investigate the estrogen adsorption capacity in MPs.

Urban mangrove ecosystems are under severe threat from microplastic pollution: a case study from Mangalavanam, Kerala, India

The prevalence of microplastics in urban mangrove ecosystems has received little scientific attention despite their immense ecological significance. An investigation was conducted to assess the microplastic abundance and characteristics in three different environmental compartments viz; soil (933 ± 564 particles/kg), sediment (1275 ± 532 particles/kg d.w.), and water (101.6 ± 24 particles/liter) of the Mangalavanam bird sanctuary, a protected mangrove forest in the Cochin city of India. Microplastic fibres were predominant in water, while soil and sediment contained a higher proportion of microplastic fragments. Importantly, surrounding urban features and tidal fluctuation were considered to be influencing microplastic metrics in the area. The colour composition of microplastics was found to be similar in all three environmental compartments and most of the identified polymers were those which are scarcely recycled. Altogether, this study highlights the importance of adopting location-specific measures to protect the area from microplastic pollution and provides the baseline data required for further assessing the impacts of microplastic pollution on mangroves, avifauna, and other components of biodiversity in the region.

Microplastic presence in the pelagic fish, Seriola dumerili, from Balearic Islands (Western Mediterranean), and assessment of oxidative stress and detoxification biomarkers in liver

Microplastics (MPs) are characterized by their high persistence in marine ecosystems, and due to their small size, they can be easily ingested by very diverse organisms. Although the presence of MPs in wild fish is well documented, there is still limited information on their potential to induce adverse effects. Pelagic fish species, because of their wide distribution, are considered good bioindicators for monitoring environmental pollution of marine ecosystems. This study investigated the presence of MPs in the gastrointestinal tract of the predatory pelagic fish (Seriola dumerili) in the Balearic Islands (Mediterranean Sea), and the possible relationship with oxidative stress through the analysis of biomarkers in liver tissue. The results showed the presence of MPs in 98% of total samples examined (n = 52) with an average of 12.2 ± 1.3 MPs/individual. A greater amount of fibre-like particles was isolated compared to fragments. No correlation between the presence of MPs in the gastrointestinal contents and the size of the fishes was noted. Antioxidant enzymes (superoxide dismutase and catalase) and the phase II detoxification enzyme glutathione-S-transferase showed increased activities in fish with higher MPs load. The activity ethoxyresorufin-O-deethylase and the levels of malondialdehyde were similar in both groups. In conclusion, the present results provide an important database on the assessment of the presence of MP debris in S. dumerili gastrointestinal tract and, the potential capability to cause oxidative stress.

Influence of seasonal variations on the distribution characteristics of microplastics in the surface water of the Inner Gulf of Thailand

This study collected 100-1000 L of surface water from 70 to 74 sites in the Inner Gulf of Thailand in both dry and wet seasons to investigate the relationship between the spatiotemporal distribution of microplastics and environmental variables. The quantity of microplastics in the wet season (34.59 ± 46.02 pieces/L) was significantly higher than the dry season (8.70 ± 15.34 pieces/L). Spatial distribution revealed an abundance of microplastics in river estuaries and seasonal current circulations. Polymeric characterization results showed that the plastic samples primarily consisted of polypropylene and polyethylene. New functional groups, including carbonyl, hydroxyl, and vinyl groups, were found in the chemical structures of the microplastic samples. The amount of freshwater runoff and the negative relationship with salinity confirmed that the river is the key factor in the transportation of microplastics to the coastal sea.

Mechanical recycling of plastic waste as a point source of microplastic pollution

Plastic pollution has become one of the most pressing environmental issues. Recycling is a potential means of reducing plastic pollution in the environment. However, plastic fragments are still likely released to the aquatic environment during mechanical recycling processes. Here, we examined the plastic inputs and effluent outputs of three mechanical recycling facilities in Vietnam dealing with electronic, bottle, and household plastic waste, and we found that large quantities of microplastics (plastics <5 mm in length) are generated and released to the aquatic environment during mechanical recycling without proper treatment. Comparisons with literature data for microplastics in wastewater treatment plant effluents and surface water indicated that mechanical recycling of plastic waste is likely a major point source of microplastics pollution. Although there is a mismatch between the size of the microplastics examined in the present study and the predicted no-effect concentration reported, it is still possible that microplastics generated at facilities pose risks to the aquatic environment because there might be many plastic particulates smaller than 315 μm, as suggested by our obtained size distributions. With mechanical recycling likely to increase as we move to a circular plastics economy, greater microplastics emissions can be expected. It is therefore an urgent need to fully understand not only the scale of microplastic generation and release from plastic mechanical recycling but also the environmental risk posed by microplastics in the aquatic environment.

Microplastics in the surface seawater of Bandon Bay, Gulf of Thailand

This study aimed to evaluate the microplastics abundance, composition and distribution in Bandon Bay's surface seawater, in southern Thailand. Samples of microplastics were collected from 48 transects using a surface manta trawl at four different estuaries that support human activities. The results showed that the highest microplastic abundance occurred in the fishery and aquaculture areas with a mean abundance of 0.33 particles/m³. Fragments were the dominant form at all stations. Microplastics with <1 mm were the dominant size, and white was the colour most found in all stations. Polypropylene was the major type of microplastic, accounting for 57% overall. This study is an important reference for understanding the microplastics status in the surface seawater of Bandon Bay, as it will allow relevant agencies to accurately assess the pollution level of microplastics in the bay. It is of practical significance to understand the sources and sinks of microplastics.

Study of microplastics pollution in sediments and organisms in mangrove forests: A review

Microplastics (MP) are an emerging and lesser-known pollutant that has attracted the attention of researchers around the world in recent decades. Size of PM is smaller than 5 mm and can be entered in different ways into marine environments like mangrove forests and interfere with the health of the environment and organisms. The present study reviews 53 studies in the field of microplastics in different parts (sediments and organisms) of mangrove forests. About 26% of the 53 studies was published in 2020. In most studies, MP particles were categorized based on the shape, color, size, and polymer genus. The number of microplastics per kilogram of mangrove sediments has been reported as 1.22-6390. The effect of sediment texture on the frequency of microplastic particles and the relationship between sediment pH and MP abundance were also discussed. The fiber and bright color PMs were more common in living organisms (mollusks, crustaceans, and fish). The PM particles with different genus (polypropylene, polyethylene, polystyrene, and polyethylene terephthalate) were reported for sediment samples. In sediments with smaller sizes and lower pH, microplastics have been detected more frequently. It was reported that sediments and roots of mangrove forests act as livestock and retain microplastics for a long time. The highest concentration of MP in different parts of mangrove forests (sediment and organisms) has been reported for China. Few reports were observed on microplastics in water in mangrove forests. Also, the concentration of microplastics in sediments and organisms in mangrove forests exposed to fishing, coastal tourism, urban, and industrial wastewater was higher than those in pristine areas. It is necessary to conduct comprehensive studies to monitor, control, and evaluate the MP pollution in sediments and various organisms in mangrove forests worldwide.

Microplastic occurrence in urban and industrial soils of Ahvaz metropolis: A city with a sustained record of air pollution

This study investigates, for the first time, the concentration, distribution, fate and chemical composition of microplastics (MPs) in urban and industrial soils of Ahvaz metropolis, SW Iran. MP concentrations ranged from 100 to 3135 and 80 to1220 unit·kg^-1 in urban and industrial soils, respectively, with corresponding means of 619 and 390 unit·kg^-1. The most contaminated urban sites were located in the city center. Precisely these areas were affected by insufficient sanitation infrastructure including sewer systems, surface runoff collection and sewage treatment, and also high traffic loading in a commercial zone. MPs were found in various shapes, colours and sizes. In particular, microfibres (white-transparent and < 250 μm) were the most abundant MPs found in urban (70%) and industrial (55%) soils. Based on the weathering observed in the MPs, a large number of them originated from the fragmentation of other plastics and could have been photobleached. Polyethylene terephthalate and nylon were the dominant polymers in the MPs found in both industrial and urban soils and they could originate from textiles and tyres.

Are we underestimating floating microplastic pollution? A quantitative analysis of two sampling methodologies

Microplastics (MPs) are widespread in the water column of several aquatic ecosystems. Thus, the sampling methodology is considered as a basic factor influencing MPs abundance. In this baseline, a total of 67 investigations were chosen to conduct a quantitative analysis between two sampling methods: Trawl and bulk. The aim is to report a general overview of the MPs abundance and characteristic differences based on the sampling procedures and provide methodological recommendations. MPs abundance reported by bulk studies is 3500 higher than trawl studies. Furthermore, the morphological types and polymers abundances were statistically affected by the type of sampling tool. Conversely, MPs size ranges were significantly different between sampling procedures, suggesting that trawling underestimates the smaller MPs fractions. The analysis confirms that the sampling methods should be selected based on the research objectives. In this sense, it is recommended to combine both types of sampling procedures to obtain comprehensive data.

Ecological interception effect of mangroves on microplastics

As the last barrier preventing river pollutants from entering the ocean, mangroves have strong absorption and purification abilities, and strong tolerance. We collected mangrove surface water and sediment samples from the Xixi Estuary of Xiamen city. The results showed that the abundance of microplastics in seawater ranged from 620 to 13,100 n/m³, the abundance of microplastics in sediment ranged from 143 to 488 n/kg, the distribution of microplastics was uneven, and the abundance of microplastics in the Xixi Estuary mangrove was significantly higher than that in the non-mangrove area. The sediment column sample results also showed that microplastics were detected in each layer of the sediments, indicating that microplastics were trapped in each layer of mangrove sediments. Therefore, we believe that mangrove forests have an ecological interception effect on microplastics. After entering mangroves, microplastics are affected by tidal reciprocating current scouring, river runoff, sunlight, wind erosion and other factors and gradually break into increasingly smaller particles through physical, chemical and biological effects. Microplastics accumulate in the sediments and experience sedimentation, suspension and reprecipitation processes together with the surface sediments. Mangroves should be widely planted in estuaries to reduce microplastic entry into the ocean.

Occurrence and chemical characteristics of microplastic paint flakes in the North Atlantic Ocean

Non-fibrous microplastics sampled by the Continuous Plankton Recorder (CPR) Survey throughout the North Atlantic Ocean during 2018 have been recorded and a selection (n = 17, or 16.7%) physically and chemically characterised. The average abundance of non-fibrous particles captured by the plankton silks and detectable by microscopy was estimated to be around 0.01 m^-3, with the highest concentrations evident in shelf seas of northwest Europe. Amongst the samples analysed, median size was 180 μm and, based on visible properties (e.g., brittleness, layering) and infra-red spectra, all but one were identified as flakes of paint. Semi-quantitative analysis by energy-dispersive X-ray fluorescence spectrometry with a collimated beam revealed that six flakes from European shelf seas were Cu-based antifouling formulations (without evidence of organo-Sn compounds), and five with a broader geographical distribution were Pb-based formulations of likely marine origin. Other elements regularly detected included Cr, Fe, Ti and Zn that were present in pigments or as contaminants from the underlying substrate. After fibres, paint flakes appear to be the most abundant type of microplastic in the oceans that, because of the abundance and mobility of metallic additives, deserve closer scientific attention.

The seasonal cycle of micro and meso-plastics in surface waters in a coastal environment (Ría de Vigo, NW Spain)

Marine litter is an emerging environmental problem. In this study, micro and mesoplastics were determined for the first time in seawater in Ría de Vigo (Spain) identifying their concentration, annual cycle, size, shape and polymer composition. Besides, temporal variations at an annual scale were also established. The Ría de Vigo is well known for the important industry related to marine activities (fishing, mollusc culture, shipyards, and tourism). Three sampling stations were selected along the transverse axis of Ría and were monthly sampled for one year. Seawater samples were collected using a manta trawl and analyzed with ATR-FTIR, and Raman spectroscopy to determine plastic polymer type. The mesozooplankton community (0.2-20 mm) was also studied. The samples were collected with bongo nets in the same sampling stations as plastics. Manta trawl net (330 μm) was used to collect 32 samples (identifying 854 plastic particles; 677 microplastics and 177 mesoplastics). The mean concentration across all sites was 25.4 ± 13.4 items·km^-2. The microplastics abundance was greater than that of mesoplastics (79%, and 21%, respectively). Around 30% of plastics analyzed were Polyethylene (PE), 19% were acrylates, 18% were Polypropylene (PP) and 10% were Polystyrene (PS). The main shapes of both micro and mesoplastics were fibers followed by paint sheets being black the main colour in both cases. The results showed high seasonal variability by micro and mesoplastics but similar spatial distribution. This seasonal heterogeneity can have effects on a future monitoring program. Furthermore, it was demonstrated that pollution by mesoplastics cannot be estimated through the microplastics abundances. Regarding the values of microplastics-zooplankton, they present a great negative correlation.

Investigation of microplastics in sludge from five wastewater treatment plants in Nanjing, China

Municipal wastewater treatment plants (WWTPs) have been regarded as the main receptors of microplastics in industrial and domestic wastewater. The excess sludge they generate is an important carrier for the microplastics to enter the environment. In China, relevant regional studies are still in an initial phase. In this work, microplastics in the sewage sludges at different sampling points of five WWTPs in Nanjing City (an important city in the Yangtze River basin) were investigated, including their abundance, morphology and chemical composition. Furthermore, the influence factors such as population density, economic development level, wastewater source and treatment process were also discussed. The analysis results through optical microscope and FT-IR showed that the detected microplastics were divided into fragments, films, fibers and granules. Their chemical component reached up to 19 species, including small amounts of petroleum resins which was scarcely detected in other studies. Wastewater source was the primary factor influencing the microplastic abundance and size in sludge. And the microplastic shape and chemical components were closely related to the industrial type. Furthermore, because the removal effect on the microplastics with different morphologies were varied with the treatment process, the preliminary suggestions on the technology for particular wastewater were proposed. This study provides partial regional data and analysis for the microplastics contained in the sludge of WWTPs, expecting to provide a certain theoretical support for the operations management of WWTPs and standardized sludge treatment.