FTIR study of biodegradable biopolymers: P(3HB), P(3HB-co-4HB) and P(3HB-co-3HV)

The effects of PHB-g-MA types on the mechanical, thermal, morphological, structural, and rheological properties of polyhydroxybutyrate biopolymers

This study investigates the grafting of polyhydroxybutyrate (PHB) chains with maleic anhydride (MA) in concentrations ranging from 5 % to 10 % by weight. This process was conducted during microwave treatment and using a reactive extruder, employing benzoyl peroxide (BPO) as the initiator. The impact of these methods on PHB's overall properties was thoroughly investigated. In the study, PHB-g-MA was incorporated into neat PHB via the extrusion process at a 5 % loading rate. Notably, the mechanical properties exhibited an increase in the presence of PHB-g-MA, likely due to morphological improvements in the neat PHB, as indicated by morphological characterization. X-ray diffraction results indicated crystallinity percentages increase with the addition of MA. Differential scanning calorimetry revealed minimal variation in melting and crystallization temperatures when PHB-g-MA was included. Both storage and loss moduli were enhanced by the incorporation of PHB-g-MA, and the blends exhibited consistent tan delta values. Regarding rheological properties, the storage and loss moduli of PHB blends containing PHB-g-MA blends were observed to rise with rising frequency values. Based on these results, the microwave process was identified as the most effective method for grafting.

Production and characterization of polyhydroxybutyrate bioplastic precursor from Parageobacillus toebii using low-cost substrates and its potential antiviral activity

There is an increasing desire for bioplastics produced from renewable resources as an alternative to their petrochemical counterparts. These biopolymers have long-unnoticed antiviral properties. This study aimed to produce and characterize bioplastics by Parageobacillus toebii using low-cost substrates and determine their antiviral activity against coxsackievirus B4. Seven low-cost substrates (bagasse, water hyacinth, rice straw, rice water, sesame husks, molasses, and corn syrup) were compared with glucose for bioplastic precursor production. The highest bioplastic produced was from water hyacinth and glucose, followed by molasses, rice straw, rice water, sesame husks, and bagasse. Water hyacinth and glucose media were further optimized to increase the bioplastic precursor yield. The optimization of the media leads to increases in bioplastic precursor yields of 1.8-fold (3.456 g/L) and 1.496-fold (2.768 g/L), respectively. These bioplastics were further characterized by thermogravimetric analysis (TGA), Fourier-transformed infrared (FTIR) spectroscopy, proton nuclear magnetic resonance (1H NMR), and gas chromatography-mass spectrometry (GC-MS). They are thermostable, and their characterizations confirm the presence of polyhydroxybutyrate. The antiviral assay showed reasonable antiviral effects for bioplastics from water hyacinth (80.33 %) and glucose (55.47 %) media at 250 μg/mL maximum non-toxic concentrations (MNTC). The present investigation demonstrates a low-cost model for producing polyhydroxybutyrate bioplastic precursor for antiviral applications.

The Development and Characterisation of a P(3HB-co-4HB)-Bioactive Glass-Graphene Hydrogel as a Potential Formulation for Biomedical and Therapeutical Translation

The clinical management of wounds is known to be a significant challenge: not only does the dressing need to ensure and provide the appropriate barrier and healing characteristics, but consideration of patient compliance concerning comfort, functionality, and practicality also needs to be included. The poly(3-hydroxybutyrate-co-4-hydroxubutyrate) (P(3HB-co-4HB)) copolymer, isolated from Cupriavidus malaysiensis USM1020 (C. malaysiensis USM1020), was produced in the presence of excess carbon sources (1,4-butanediol and 1,6-hexanediol) using either a shake flask cultivation process or a bioreactor fermentation system. P(3HB-co-4HB) is widely known to be biodegradable and highly biocompatible and contains a tuneable 4HB monomer molar fraction, which is known to affect the final physicochemical properties of the intracellular copolymer. In this paper, we describe not only the fabrication of the polymeric gel but also its optimised profiling using a range of physical and mechanical techniques, i.e., SEM, FTIR, DMA, DSC, and WCA. The further enhancement of the gel through additional functionalisation with sol-gel-derived bioactive glass and liquid-exfoliated graphene was also investigated. The biocompatibility and biological characterisation of the substrates was assessed using murine osteoblasts (MC3T3), human primary dermal fibroblasts (HDFs), human fibroblast (BJ) cells, and standard cell culture assays (i.e., metabolic activity, LDH release, and live/dead staining). In short, P(3HB-co-4HB) was successfully isolated from the bacteria, with the defined physico-chemical profiles dependent on the culture substrate and culturing platform used. The additional enhancement of the copolymer with bioactive glass and/or graphene was also demonstrated by varying the combination loading of the materials, i.e., graphene resulted in an increase in tensile strength (~11 MPa) and the wettability increased following the incorporation of bioactive glass and 0.01 wt% graphene (WCA ~46.3°). No detrimental effects in terms of biocompatibility were noticed during the 7 days of culture in the primary and established cell lines. This study demonstrates the importance of optimising each of the individual components within the biocomposite and their relationship concerning the fine-tuning of the material's properties, thus targeting and impacting the endpoint application.

Efficient production of a polyhydroxyalkanoate by Azotobacter vinelandii OP using apple residues as promising feedstock

Fruit residues are attractive substrates for the production of bacterial polyhydroxyalkanoates due to the high contents of fermentable sugars and the fast, simple, and efficient pretreatment methods required. In this study, apple residues, mainly apple peel, were used as the sole carbon source in cultures of the bacterium Azotobacter vinelandii OP to produce poly-3-hydroxybutyrate (P3HB). Conversion from the residue to total sugars was highly effective, achieving conversions of up to 65.4 % w w^-1 when using 1 % v v^-1 sulfuric acid and 58.3 % w w^-1 in the absence of acid (only water). The cultures were evaluated at the shake-flask scale and in 3-L bioreactors using a defined medium under nitrogen starvation conditions. The results showed the production of up to 3.94 g L^-1 P3HB in a bioreactor, reaching an accumulation of 67.3 % w w^-1 when using apple residues. For the PHB obtained from the cultures with apple residues, a melting point of 179.99 °C and a maximum degradation temperature of 274.64 °C were calculated. A P3HB production strategy is shown using easily hydrolysable fruit residues to achieve production yields comparable to those obtained with pure sugars under similar cultivation conditions.

Development and Characterization of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers Containing Cerium Oxide Nanoparticles for Active Food Packaging Applications

Food quality is mainly affected by oxygen through oxidative reactions and the proliferation of microorganisms, generating changes in its taste, odor, and color. The work presented here describes the generation and further characterization of films with active oxygen scavenging properties made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) loaded with cerium oxide nanoparticles (CeO₂NPs) obtained by electrospinning coupled to a subsequent annealing process, which could be used as coating or interlayer in a multilayer concept for food packaging applications. The aim of this work is to explore the capacities of these novel biopolymeric composites in terms of O₂ scavenging capacity, as well as antioxidant, antimicrobial, barrier, thermal, and mechanical properties. To obtain such biopapers, different ratios of CeO₂NPs were incorporated into a PHBV solution with hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The produced films were analyzed in terms of antioxidant, thermal, antioxidant, antimicrobial, optical, morphological and barrier properties, and oxygen scavenging activity. According to the results, the nanofiller showed some reduction of the thermal stability of the biopolyester but exhibited antimicrobial and antioxidant properties. In terms of passive barrier properties, the CeO₂NPs decreased the permeability to water vapor but increased the limonene and oxygen permeability of the biopolymer matrix slightly. Nevertheless, the oxygen scavenging activity of the nanocomposites showed significant results and improved further by incorporating the surfactant CTAB. The PHBV nanocomposite biopapers developed in this study appear as very interesting constituents for the potential design of new active organic recyclable packaging materials.

Process intensification of biopolymer polyhydroxybutyrate production by pseudomonas putida SS9: A statistical approach

There are numerous elements of daily life where plastic is employed, yet it is uncertain exactly when it will deteriorate. Poly-(3-hydroxybutyrate) (PHB), a biodegradable polymer, is viewed as a possible substitute for synthetic plastics made from petroleum. With Pseudomonas putida SS9, the current study sought to enhance operational conditions and nutritional factors to enhance PHB production. To maximize the impacts of operational factors, a combination of response surface modeling (RSM) and artificial neural networks (ANN) has been applied. PHB content was used as the response while the interaction effects of the factors were examined. The optimal parameters for PHB synthesis were further tested in a lab scale fermentor. Under optimal conditions, 13.83 g/L of C, 0.57 g/L of N, 0.59 g/L of P, the maximal productivity of PHB obtained with Pseudomonas putida SS9 is 12.89 g/L after 84 h. A mean square value of 15.7 with P < 0.0001 were obtained from the ANOVA results of quadratic polynomial model using RSM. The same construct was employed in MATLAB software to train a feed-forward ANN using the back-propagation approach, generating 12.88 g/L. The data indicated that a properly trained ANN model outperforms the RSM model in prediction. Furthermore, employing dairy waste (cheese whey) as a low-cost feedstock resulted in an equally proportionate PHB yield of 12.02 g/L. Therefore, cheese whey appeared to be a viable alternative carbon source over optimized synthetic media.

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation

Microalgae and cyanobacteria are photosynthetic microorganisms’ sources of renewable biomass that can be used for bioplastic production. These microorganisms have high growth rates, and contrary to other feedstocks, such as land crops, they do not require arable land. In addition, they can be used as feedstock for bioplastic production while not competing with food sources (e.g., corn, wheat, and soy protein). In this study, we review the macromolecules from microalgae and cyanobacteria that can serve for the production of bioplastics, including starch and glycogen, polyhydroxyalkanoates (PHAs), cellulose, polylactic acid (PLA), and triacylglycerols (TAGs). In addition, we focus on the cultivation of microalgae and cyanobacteria for wastewater treatment. This approach would allow reducing nutrient supply for biomass production while treating wastewater. Thus, the combination of wastewater treatment and the production of biomass that can serve as feedstock for bioplastic production is discussed. The comprehensive information provided in this communication would expand the scope of interdisciplinary and translational research.

Polyhydroxybutyrate (PHB) produced from red grape pomace: Effect of purification processes on structural, thermal and antioxidant properties

Red grape pomace was used as a source for poly(3-hydroxybutyrate) (PHB) production, which was then subject to a range of purification processes. The different PHB biopolymers were characterized for chemical structure, crystallinity, thermal properties, colour, release of compounds into different food simulants and antioxidant inhibition, and comparisons were made with a commercially available PHB. An increase in purification steps did not have a significant effect on the high thermal stability of the extracted biopolymer, but it decreased the degree of crystallinity and the presence of amino acids and aromatic compounds. With additional purification, the PHB powders also whitened and the number of components released from the biopolymer into food simulants decreased. The released compounds presented antioxidant inhibition, which has not been previously reported in the literature or with commercially available polyhydroxyalkanoates. This is of great interest for food packaging and biomedical industries where the addition of antioxidant additives to improve PHB functional properties may not be necessary and could be avoided.

Thermo-Oxidative Destruction and Biodegradation of Nanomaterials from Composites of Poly(3-hydroxybutyrate) and Chitosan

A complex of structure-sensitive methods of morphology analysis was applied to study film materials obtained from blends of poly(3-hydroxybutyrate) (PHB) and chitosan (CHT) by pouring from a solution, and nonwoven fibrous materials obtained by the method of electrospinning (ES). It was found that with the addition of CHT to PHB, a heterophase system with a nonequilibrium stressed structure at the interface was formed. This system, if undergone accelerated oxidation and hydrolysis, contributed to the intensification of the growth of microorganisms. On the other hand, the antimicrobial properties of CHT led to inhibition of the biodegradation process. Nonwoven nanofiber materials, since having a large specific surface area of contact with an aggressive agent, demonstrated an increased ability to be thermo-oxidative and for biological degradation in comparison with film materials.

Fused ring effect on optical nonlinearity and structure property relationship of anthracenyl chalcone based push-pull chromophores

The Ultraviolet-visible (UV-Vis) spectra indicate that anthracenyl chalcones (ACs) have high maximum wavelengths and good transparency windows for optical applications and are suitable for optoelectronic applications owing to their HOMO–LUMO energy gaps (2.93 and 2.76 eV). Different donor substituents on the AC affect their dipole moments and nonlinear optical (NLO) responses. The positive, negative, and neutral electrostatic potential regions of the molecules were identified using molecular electrostatic potential (MEP). The stability of the molecule on account of hyperconjugative interactions and accompanying charge delocalization was analyzed using natural bond orbital (NBO) analysis. Open and closed aperture Z-scans were performed using a continuous-wave frequency-doubled diode-pumped solid-state (DPSS) laser to measure the nonlinear absorption and nonlinear refractive index coefficients, respectively. The valley-to-peak profile of AC indicated a negative nonlinear refractive index coefficient. The obtained single crystals possess reverse saturation absorption due to excited-state absorption. The structural and nonlinear optical properties of the molecules have been discussed, along with the role of anthracene substitution for enhancing the nonlinear optical properties. The calculated third-order susceptibility value was 1.10 x10^-4 esu at an intensity of 4.1 kW/cm², higher than the reported values for related chalcone derivatives. The NLO response for both ACs offers excellent potential in optical switching and limiting applications.

Polyhydroxyalkanoate (PHA) Production in Pseudomonas sp. phDV1 Strain Grown on Phenol as Carbon Sources

Pseudomonas strains have a variety of potential uses in bioremediation and biosynthesis of biodegradable plastics. Pseudomonas sp. strain phDV1, a Gram-negative phenol degrading bacterium, has been found to utilize monocyclic aromatic compounds as sole carbon source via the meta-cleavage pathway. The degradation of aromatic compounds comprises an important step in the removal of pollutants. The present study aimed to investigate the ability of the Pseudomonas sp. strain phDV1 to produce polyhydroxyalkanoates (PHAs) and examining the effect of phenol concentration on PHA production. The bacterium was cultivated in minimal medium supplemented with different concentrations of phenol ranging from 200-600 mg/L. The activity of the PHA synthase, the key enzyme which produces PHA, was monitored spectroscopically in cells extracts. Furthermore, the PHA synthase was identified by mass spectrometry in cell extracts analyzed by SDS-PAGE. Transmission electron micrographs revealed abundant electron-transparent intracellular granules. The isolated biopolymer was confirmed to be polyhydroxybutyrate (PHB) by FTIR, NMR and MALDI-TOF/TOF analyses. The ability of strain Pseudomonas sp. phDV1 to remove phenol and to produce PHB makes the strain a promising biocatalyst in bioremediation and biosynthesis of biodegradable plastics.

AK, Ramakrishna S, Amirul AAA. Surface Characterization and Physiochemical Evaluation of P(3HB-co-4HB)-Collagen Peptide Scaffolds with Silver Sulfadiazine as Antimicrobial Agent for Potential Infection-Resistance Biomaterial

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is a bacterial derived biopolymer widely known for its unique physical and mechanical properties to be used in biomedical application. In this study, antimicrobial agent silver sulfadiazine (SSD) coat/collagen peptide coat-P(3HB-co-4HB) (SCCC) and SSD blend/collagen peptide coat-P(3HB-co-4HB) scaffolds (SBCC) were fabricated using a green salt leaching technique combined with freeze-drying. This was then followed by the incorporation of collagen peptides at various concentrations (2.5-12.5 wt.%) to P(3HB-co-4HB) using collagen-coating. As a result, two types of P(3HB-co-4HB) scaffolds were fabricated, including SCCC and SBCC scaffolds. The increasing concentrations of collagen peptides from 2.5 wt.% to 12.5 wt.% exhibited a decline in their porosity. The wettability and hydrophilicity increased as the concentration of collagen peptides in the scaffolds increased. In terms of the cytotoxic results, MTS assay demonstrated the L929 fibroblast scaffolds adhered well to the fabricated scaffolds. The 10 wt.% collagen peptides coated SCCC and SBCC scaffolds displayed highest cell proliferation rate. The antimicrobial analysis of the fabricated scaffolds exhibited 100% inhibition towards various pathogenic microorganisms. However, the SCCC scaffold exhibited 100% inhibition between 12 and 24 h, but the SBCC scaffolds with SSD impregnated in the scaffold had controlled release of the antimicrobial agent. Thus, this study will elucidate the surface interface-cell interactions of the SSD-P(3HB-co-4HB)-collagen peptide scaffolds and controlled release of SSD, antimicrobial agent.

Production and characterization of poly 3-hydroxybutyrate-co-3-hydroxyvalerate in wheat starch wastewater and its potential for nanoparticle synthesis

Polyhydroxyalkanoates (PHAs) are polymers with biodegradable and biocompatible properties accumulated in a wide variety of bacterial strains. In the present study, active sludge, wheat starch wastewater (WSW), and oil wastewater were used for the isolation and screening of PHA-accumulating bacteria. WSW was then implemented as a cheap and economical culture medium for the production of PHAs by the selected isolate. The extracted PHA was characterized, and the capability of produced biopolymer for preparing nanoparticles was evaluated. Based on the results, 96 different bacterial isolates were obtained, of which the strains isolated from WSW demonstrated the highest PHA-accumulation capability. The maximum PHA content of 3.07 g/l (59.50% of dry cell weight) was obtained by strain N6 in 21 h. The selected strain was identified by molecular approaches as Bacillus cereus. Afterward, the physicochemical characterization of an accumulated biopolymer was specified as a PHBV copolymer. Finally, spherical homogenous PHBV nanoparticles with a size of 137 nm were achieved. The PHBV nanoparticles showed a suitable small size and good zeta potential for medical applications. Hence, it can be concluded that isolated wild strain (B. cereus) has the potential exploitation capability for cost-effective PHBV production using the WSW.

Properties and structure of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) filaments for fused deposition modelling

Fused deposition modelling (FDM) is a process of additive manufacturing allowing creating of highly precise complex three-dimensional objects for a large range of applications. The principle of FDM is an extrusion of the molten filament and gradual deposition of layers and their solidification. Potential applications in pharmaceutical and medical fields require the development of biodegradable and biocompatible thermoplastics for the processing of filaments. In this work, the potential of production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) filaments for FDM was investigated in respect to its thermal stability. Copolymer P(3HB-co-4HB) was biosynthesised by Cupriavidus malaysiensis. Rheological and mechanical properties of the copolymer were modified by the addition of plasticizers or blending with poly(lactic acid). Thermal stability of mixtures was studied employing thermogravimetric analysis and rheological analyses by monitoring the time-dependent changes in the complex viscosity of melt samples. The plasticization of P(3HB-co-4HB) slightly hindered its thermal degradation but the best stabilization effect was found in case of the copolymer blended with poly(lactic acid). Overall, rheological, thermal and mechanical properties demonstrated that the plasticized P(3HB-co-4HB) is a potential candidate of biodegradable polymer for FDM processes.

Improved fermentation strategies in a bioreactor for enhancing poly(3-hydroxybutyrate) (PHB) production by wild type Cupriavidus necator from fructose

Poly(3-hydroxybutyrate) (PHB) belongs to the family of polyhydroxyalkanoates, biopolymers used for agricultural, industrial, or even medical applications. However, scaling up the production is still an issue due to the myriad of parameters involved in the fermentation processes. The present work seeks, firstly, to scale up poly(3-hydroxybutyrate) (PHB) production by wild type C. necator ATCC 17697 from shaken flasks to a stirred-tank bioreactor with the optimized media and fructose as carbon source. The second purpose is to improve the production of PHB by applying both the batch and fed-batch fermentation strategies in comparison with previous works of wild type C. necator with fructose. Furthermore, thinking of biomedical applications, physicochemical, and cytotoxicity analyses of the produced biopolymer, are presented.

Fed-batch fermentation with an exponential feeding strategy enabled us to achieve the highest values of PHB concentration and productivity, 25.7 g/l and 0.43 g/(l h), respectively. The PHB productivity was 3.3 and 7.2 times higher than the one in batch strategy and shaken flask cultures, respectively. DSC, FTIR, ¹H, and ¹³C NMR analysis led to determine that the biopolymer produced by C. necator ATCC 17697 has a molecular structure and characteristics in agreement with the commercial PHB. Additionally, the biopolymer does not induce cytotoxic effects on the NIH/3T3 cell culture.

Due to the improved fermentation strategies, PHB concentration resulted in 40 % higher of the already reported one for wild type C. necator using other fed-batch modes and fructose as a carbon source. Thus the produced PHB could be attractive for biomedical applications, which generate a rising interest in polyhydroxyalkanoates during recent years.

Production of the Polyhydroxyalkanoate PHBV from Ricotta Cheese Exhausted Whey by Haloferax mediterranei Fermentation

In the last decade, the dairy industry underwent a rapid expansion due to the increasing demand of milk-based products, resulting in high quantity of wastewater, i.e., whey and ricotta cheese exhausted whey (RCEW). Although containing high content of nutritional compounds, dairy by-products are still disposed as waste rather being reintroduced in a new production chain, hence leading to environmental and economic issues. This study proposes a new biotechnological approach based on the combination of membrane filtration and fermentation to produce poly-hydroxyalkanoates (PHA), biodegradable bioplastics candidate as an alternative to petroleum-derived plastics. The protocol, exploiting the metabolic capability Haloferax mediterranei to synthesize PHA from RCEW carbon sources, was set up under laboratory and pilot scale conditions. A multi-step fractionation was used to recover a RCEW fraction containing 12.6% (w/v) of lactose, then subjected to an enzymatic treatment aimed at releasing glucose and galactose. Fermentation conditions (culture medium for the microorganism propagation, inoculum size, time, and temperature of incubation) were selected according to the maximization of polymer synthesis, under in-flasks experiments. The PHA production was then tested using a bioreactor system, under stable and monitored pH, temperature, and stirring conditions. The amount of the polymer recovered corresponded to 1.18 g/L. The differential scanning calorimetry (DSC) analysis revealed the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as the polymer synthesized, with a relatively high presence of hydroxyvalerate (HV). Identity and purity of the polymer were confirmed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and X-ray photoelectron (XPS) spectroscopy analyses. By combining the fractionation of RCEW, one of the most abundant by-products from the agri-food industry, and the use of the halophile Hfx mediterranei, the production of PHBV with high purity and low crystallinity has successfully been optimized. The process, tested up to pilot scale conditions, may be further implemented (e.g., through fed-batch systems) and used for large-scale production of bioplastics, reducing the economical and environmental issues related the RCEW disposal.

Sustainable Materials with Enhanced Mechanical Properties Based on Industrial Polyhydroxyalkanoates Reinforced with Organomodified Sepiolite and Montmorillonite

Microplastics have become one of the greatest environmental challenges worldwide. To turn this dramatic damage around, EU regulators now want to ensure that plastic itself is fully recyclable or biodegradable. The aim of the present work is to develop a biobased and biodegradable biocomposite based on commercial polyhydroxyalkanoates (PHAs) and nanoclays, with the objective of achieving a reduction of rancid odour while avoiding any loss in thermomechanical properties, thus tackling two key disadvantages of PHAs. This research aims at completely characterising the structural, thermal and mechanical behaviour of the formulations developed, understanding the compatibility mechanisms in order to be able to assess the best commercial combinations for industrial applications in the packaging and automotive sectors. We report the development of nine nanobiocomposite materials based on three types of commercial PHA matrices: a linear poly(3-hydroxybutyrate) (P3HB); two copolymers based on poly(3-hydroxybutyrate)-co-poly(4-hydroxybutyrate) (P3HB-co-P4HB); and nanoclays, which represent a different polar behaviour. Dispersion achieved is highly relevant compared with literature results. Our findings show impressive mechanical enhancements, in particular for P3HB reinforced with sepiolite modified via aminosilanes.

Polyhydroxybutyrate and phenolic compounds microalgae electrospun nanofibers: A novel nanomaterial with antibacterial activity

Polymer nanofibers produced by electrospinning are promising for use in food packaging because of their nanometric diameter, which provides a barrier to external conditions above the possible incorporation of the active compounds. The microalga Spirulina sp. LEB 18 synthesizes bioproducts, such as polyhydroxybutyrate (PHB), which is biodegradable and has similar mechanical and thermal properties to polymers of petrochemical origin. Moreover, phenolic compounds of microalgae have antibacterial, antifungal, and antioxidant activities, which is a differential for the development of packaging. The objective of the study was to develop a nanomaterial with antibacterial action from bioproducts of microalgal origin. PHB nanofibers containing phenolic compounds presented average diameter of 810±85nm exhibited hydrophobicity, which gave protection to the food relative to the moisture outside the package. These nanofibers showed inhibition of the growth of Staphylococcus aureus ATCC 25923 with a zone of 7.5±0.4mm. Thermal and mechanical properties have confirmed the potential applicability of this material as food packaging. This new nanomaterial combines a packaging function to protect products and to be biodegradable with the antibacterial activity that prevents the proliferation of microorganisms and ensures the quality and preservation of food.

Electrospun Pectin-Polyhydroxybutyrate Nanofibers for Retinal Tissue Engineering

Natural polysaccharide pectin has for the first time been grafted with polyhydroxybutyrate (PHB) via ring-opening polymerization of β-butyrolactone. This copolymer, pectin-polyhydroxybutyrate (pec-PHB), was blended with PHB in various proportions and electrospun to produce nanofibers that exhibited uniform and bead-free nanostructures, suggesting the miscibility of PHB and pec-PHB. These nanofiber blends exhibited reduced fiber diameters from 499 to 336-426 nm and water contact angles from 123.8 to 88.2° on incorporation of pec-PHB. They also displayed 39-335% enhancement of elongation at break relative to pristine PHB nanofibers. pec-PHB nanofibers were found to be noncytotoxic and biocompatible. Human retinal pigmented epithelium (ARPE-19) cells were seeded onto pristine PHB and pec-PHB nanofibers as scaffold and showed good proliferation. Higher proportions of pec-PHB (pec-PHB10 and pec-PHB20) yielded higher densities of cells with similar characteristics to normal RPE cells. We propose, therefore, that nanofibers of pec-PHB have significant potential as retinal tissue engineering scaffold materials.

Biodegradation of P(3HB-co-4HB) powder by Pseudomonas mendocina for preparation low-molecular-mass P(3HB-co-4HB)

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) is a biodegradable plastic that is extensively utilized in many fields. In this work, P(3HB-co-4HB) powder was degraded by Pseudomonas mendocina for the preparation of low-molecular-mass (LMW) P(3HB-co-4HB). After degradation, the remaining P(3HB-co-4HB) powder was analyzed via gel permeation chromatography (GPC), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The degradation of P(3HB-co-4HB) by P. mendocina occurred in two stages: the fast degradation stage (0-8 h) and the slow degradation stage (8-24 h). GPC analysis showed that the molecular weight of P(3HB-co-4HB) gradually decreased with degradation time. After 24 h of degradation, the weight-average molecular weight of P(3HB-co-4HB) was reduced to 4-5 kDa. DSC and XRD analyses both verified that the degree of crystallinity decreased with prolonged degradation time. The melting temperature of the degraded powder, however, remained unchanged. FTIR and ¹H NMR analyses of the degraded powder showed that no new material was produced during degradation. Thus, the degradation of P(3HB-co-4HB) by P. mendocina could be used to produce LMW P(3HB-co-4HB) for use in various applications, such as the synthesis of amphiphilic block copolymers.

Zwitterionic Polyhydroxybutyrate Electrospun Fibrous Membranes with a Compromise of Bioinert Control and Tissue-Cell Growth

We present a method for surface modification by thermal-evaporation self-assembling of poly(3-hydroxybutyrate) (PHB) fibrous membranes with a copolymer of hydrophobic octadecyl acrylate repeat units and hydrophilic zwitterionic 4-vinylpyridine blocks, zP(4VP-r-ODA), in view of controlling biofoulant-fiber interactions. PHB is of interest as a material for bioscaffolding, but its disadvantage is its hydrophobicity, which leads to unwanted interactions with proteins, blood cells, or bacteria. Surface modification of electrospun PHB fibers addresses this issue because the hydrophilicity of the membranes is improved, leading to a significant reduction in bovine serum albumin (92%), lysozyme (73%), and fibrinogen (50%) adsorption. From a coating density of 0.78 mg/cm², no bacteria interacted with the fibers, and from 1.13 mg/cm², excellent hemocompatibility of membranes was measured from thrombocytes, erythrocytes, leukocytes, and whole blood attachment tests. Additionally, HT-1080 fibroblasts were observed to develop in contact with the fibers after 3-7 days of incubation (cell density up to 329 ± 16 cells/mm²), suggesting that zP(4VP-r-ODA) provides an adequate humid environment for their growth. Providing an effective control of the surface chemistry and of the coating density, the association of PHB and zP(4VP-r-ODA) can promote the growth of fibroblasts, still maintaining resistance to unwanted biofoulants, and appears to be a promising composite material for tissue engineering.

Production and characterization of poly(3-hydroxy butyrate-co-3 hydroxyvalerate) (PHBV) by a novel halotolerant mangrove isolate

A halophilic mangrove isolate identified by 16S rRNA sequence as a Bacillus spp. was found to be capable of using a broad range of carbon sources including monosaccharides (glucose and fructose), disaccharides (sucrose), pentoses (xylose and arabinose), various organic acids (acetic acid, propionic acid and octanoic acid) and even the acid pre-treated liquor (APL) of sugarcane trash, a lignocellulosic biomass, for growth and the production of polyhydroxyalkanoates (PHAs) such as poly(3-hydroxybutyrate, P3HB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate, PHBV), and 4-hydroxyhexanoate, 4HHX). The study describes the innate ability of a wild-type culture for PHBV production by both propionate dependent and propionate independent pathways. The biopolymer was extracted and characterized physico-chemically. The PHBV yield from glucose was estimated to be 73% of biomass weight with a high 3-hydroxyvalerate fraction of 48mol%. Thereafter, spherical homogenous PHBV nanoparticles of ∼164nm size were prepared for future applications.

Isolation and characterization of a thermophilic Bacillus shackletonii K5 from a biotrickling filter for the production of polyhydroxybutyrate

Polyhydroxyalkanoates (PHAs) are aliphatic polyesters accumulated intracellularly by both Gram-negative and Gram-positive bacteria. However, compared to the PHAs of Gram-negative bacteria, few endotoxins (lipopolysaccharides, LPS), which would be co-purified with PHAs and cause immunogenic reactions, are found in the PHAs produced by Gram-positive bacteria. A thermophilic Gram-positive bacterium K5, which exhibited good growth and polyhydroxybutyrate (PHB)-accumulating ability, has been isolated and characterized from a biotrickling filter designed for the removal of NOx from flue gas in a coal-fired power plant in China. Based on the biochemical characterization and 16S rRNA gene sequence (Genbank accession no. JX437933), the strain K5 has been identified as Bacillus shackletonii, which has rarely been reported in the literature, and this report is the first time that B. shackletonii has been found to accumulate PHB. The strain K5 was able to utilize glucose as carbon source to synthesize PHB at a broad range of temperatures (from 35 to 50°C), and the ideal temperature was 45°C. The strain K5 could effectively yield PHB of up to 69.9% of its cell dry weight (CDW) (2.28 g/L) in flask experiments employing glucose as carbon source at 45°C, followed by 56.8% and 52.3% of its CDW when using sodium succinate and glycerol as carbon source, respectively. For batch cultivation, the strain K5 was able to produce PHB of up to 72.6% of its cell dry weight (9.76 g/L) employing glucose as carbon source at 45°C and pH7.0.

Laser microperforated biodegradable microbial polyhydroxyalkanoate substrates for tissue repair strategies: an infrared microspectroscopy study

Flexible and biodegradable film substrates prepared by solvent casting from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) solutions in chloroform were microperforated by ultraviolet laser ablation and subsequently characterized using infrared (IR) microspectroscopy and imaging techniques and scanning electron microscopy (SEM). Both transmission synchrotron IR microspectroscopy and attenuated total reflectance microspectroscopy measurements demonstrate variations in the polymer at the ablated pore rims, including evidence for changes in chemical structure and crystallinity. SEM results on microperforated PHBHV substrates after cell culture demonstrated that the physical and chemical changes observed in the biomaterial did not hinder cell migration through the pores.

Biosynthesis of medium chain length poly(3-hydroxyalkanoates) (mcl PHAs) from cosmetic co-products by Pseudomonas raguenesii sp. nov., isolated from Tetiaroa, French Polynesia

A new bacterium, designated as strain TE9 was isolated from a microbial mat in French Polynesia and was studied for its ability to synthesize medium chain length poly-beta-hydroxyalkanoates (mcl PHAs) during cultivation on cosmetics co-products. The composition of PHAs was analysed by coupled gas chromatography mass spectroscopy (GC/MS), nuclear magnetic resonance (NMR) and Fourier Transform InfraRed (FTIR) spectroscopy. PHAs were composed of C6-C14 3-hydroxyacids monomers, with a predominance of 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD) and 3-hydroxydodecanoate (3HDD). Differential scanning calorimetry (DSC) experiments allowed the characterization of elastomeric materials with a melting point T(m) near 50 degrees C, enthalpy of fusion DeltaH(m) from 27 to 32 J/g, and glass transition temperature T(g) of -43 degrees C. Molecular weights ranged from 175,000 to 358,000 g/mol. On the basis of the phenotypical features and genotypic investigations, strain TE9 was assigned to the Pseudomonas genus and the name of Pseudomonas raguenesii sp. nov. is proposed.

Poly-3-hydroxy butyric acid interaction with the transgenic flax fibers: FT-IR and Raman spectra of the composite extracted from a GM flax

The FT-IR and FT-Raman studies have been performed on commercial 3-hydroxy-butyric acid, commercial poly-3-hydroxy butyric acid as well as poly-3-hydroxy butyric acid (PHB) produced by bacteria. The data were compared to those obtained for poly-3-hydroxy butyric acid extracted from natural and genetically modified flax. Genetically modified flax was generated by expression of three bacterial genes coding for synthesis of poly-3-hydroxy butyric acid. Thus transgenic flaxes were enhanced with different amount of the PHB. The discussion of polymer structure and vibrational properties has been done in order to get insight into differences among these materials. The interaction between the cellulose of flax fibers and embedded poly-3-hydroxybutyric acid has been also discussed. The spectroscopic data provide evidences for structural changes in cellulose and in PHB when synthesized in fibers. Based on this data it is suggesting that cellulose and PHB interact by hydrogen and ester bonds.

Bacterial synthesis of biodegradable polyhydroxyalkanoates

Various bacterial species accumulate intracellular polyhydroxyalkanoates (PHAs) granules as energy and carbon reserves inside their cells. PHAs are biodegradable, environmentally friendly and biocompatible thermoplastics. Varying in toughness and flexibility, depending on their formulation, they can be used in various ways similar to many nonbiodegradable petrochemical plastics currently in use. They can be used either in pure form or as additives to oil-derived plastics such as polyethylene. However, these bioplastics are currently far more expensive than petrochemically based plastics and are therefore used mostly in applications that conventional plastics cannot perform, such as medical applications. PHAs are immunologically inert and are only slowly degraded in human tissue, which means they can be used as devices inside the body. Recent research has focused on the use of alternative substrates, novel extraction methods, genetically enhanced species and mixed cultures with a view to make PHAs more commercially attractive.