Heterologous production, characterization and dye decolorization ability of a novel thermostable laccase isoenzyme from Trametes trogii BAFC 463

Optimizing laccase selection for enhanced outcomes: a comprehensive review

Despite their widespread applications in sectors such as pulp and paper, textile, food and beverage, pharmaceuticals, and biofuel production, laccases encounter challenges related to their activity and stability under varying reaction conditions. This review accumulates data on the complex interplay between laccase characteristics and reaction conditions for maximizing their efficacy in diverse biotechnological processes. Benefits of organic media such as improved substrate selectivity and reaction control, and their risks such as enzyme denaturation and reduced activity are reported. Additionally, the effect of reaction conditions such as pH and temperature on laccase activity and stability are gathered and reported. Sources like Bacillus pumilus, Alcaligenes faecalis, Bacillus clausii, and Bacillus tequilensis SN4 are producing laccases that are both thermo-active and alkali-active. Additionally, changes induced by the presence of various substances within reaction media such as metals, inhibitors, and organic solvents are also reported. Bacillus pumilus and Bacillus licheniformis LS04 produce the most resistant laccases in this case. Finally, the remarkable laccases have been highlighted and the proper laccase source for each industrial application is suggested.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-024-04015-5.

Recent advances in laccase activity assays: A crucial challenge for applications on complex substrates

Despite being one of the first enzymes discovered in 1883, the determination of laccase activity remains a scientific challenge, and a barrier to the full use of laccase as a biocatalyst. Indeed, laccase, an oxidase of the blue multi-copper oxidases family, has a wide range of substrates including substituted phenols, aromatic amines and lignin-related compounds. Its one-electron mechanism requires only oxygen and releases water as a reaction product. These characteristics make laccase a biocatalyst of interest in many fields of applications including pulp and paper industry, biorefineries, food, textile, and pharmaceutical industries. But to fully envisage the use of laccase at an industrial scale, its activity must be reliably quantifiable on complex substrates and in complex matrices. This review aims to describe current and emerging methods for laccase activity assays and place them in the context of a potential industrial use of the enzyme.

Harnessing the potential of white rot fungi and ligninolytic enzymes for efficient textile dye degradation: A comprehensive review

The contamination of wastewater with textile dyes has emerged as a pressing environmental concern due to its persistent nature and harmful effects on ecosystems. Conventional dye treatment methods have proven inadequate in effectively breaking down complex dye molecules. However, a promising alternative for textile dye degradation lies in the utilization of white rot fungi, renowned for their remarkable lignin-degrading capabilities. This review provides a comprehensive analysis of the potential of white rot fungi in degrading textile dyes, with a particular focus on their ligninolytic enzymes, specifically examining the roles of lignin peroxidase (LiP), manganese peroxidase (MnP), and laccase in the degradation of lignin and their applications in textile dye degradation. The primary objective of this paper is to elucidate the enzymatic mechanisms involved in dye degradation, with a spotlight on recent research advancements in this field. Additionally, the review explores factors influencing enzyme production, including culture conditions and genetic engineering approaches. The challenges associated with implementing white rot fungi and their ligninolytic enzymes in textile dye degradation processes are also thoroughly examined. Textile dye contamination poses a significant environmental threat due to its resistance to conventional treatment methods. White rot fungi, known for their ligninolytic capabilities, offer an innovative approach to address this issue. The review delves into the intricate mechanisms through which white rot fungi and their enzymes, including LiP, MnP, and laccase, break down complex dye molecules. These enzymes play a pivotal role in lignin degradation, a process that can be adapted for textile dye removal. The review also emphasizes recent developments in this field, shedding light on the latest findings and innovations. It discusses how culture conditions and genetic engineering techniques can influence the production of these crucial enzymes, potentially enhancing their efficiency in textile dye degradation. This highlights the potential for tailored enzyme production to address specific dye contaminants effectively. The paper also confronts the challenges associated with integrating white rot fungi and their ligninolytic enzymes into practical textile dye degradation processes. These challenges encompass issues like scalability, cost-effectiveness, and regulatory hurdles. By acknowledging these obstacles, the review aims to pave the way for practical and sustainable applications of white rot fungi in wastewater treatment. In conclusion, this comprehensive review offers valuable insights into how white rot fungi and their ligninolytic enzymes can provide a sustainable solution to the urgent problem of textile dye-contaminated wastewater. It underscores the enzymatic mechanisms at play, recent research breakthroughs, and the potential of genetic engineering to optimize enzyme production. By addressing the challenges of implementation, this review contributes to the ongoing efforts to mitigate the environmental impact of textile dye pollution. PRACTITIONER POINTS: Ligninolytic enzymes from white rot fungi, like LiP, MnP, and laccase, are crucial for degrading textile dyes. Different dyes and enzymatic mechanisms is vital for effective wastewater treatment. Combine white rot fungi-based strategies with mediator systems, co-culturing, or sequential treatment approaches to enhance overall degradation efficiency. Emphasize the broader environmental impact of textile dye pollution and position white rot fungi as a promising avenue for contributing to mitigation efforts. This aligns with the overarching goal of sustainable wastewater treatment practices and environmental conservation. Consider scalability, cost-effectiveness, and regulatory compliance to pave the way for sustainable applications that can effectively mitigate the environmental impact of textile dye pollution.

Characterization of a New Laccase from Vibrio sp. with pH-stability, Salt-tolerance, and Decolorization Ability

Laccases have been widely used for fruit juice clarification, food modification, and paper pulp delignification. In addition, laccases exhibit remarkable performance in the degradation of toxic substances, including pesticides, organic synthetic dyes, antibiotics, and organic pollutants. Thus, the screening and development of robust laccases has attracted significant attention. In this study, Vibrio sp. LA is a strain capable of producing cold-adapted laccases. The laccase coding gene L01 was cloned from this strain and expressed in Yarrowia lipolytica, a host with good secretion ability. The secreted L01 (approximate MW of 56,000 Da) had the activity and specific activity of 18.6 U/mL and 98.6 U/mg toward ABTS, respectively. The highest activity occurred at 35 °C. At 20 °C, L01 activity was over 70% of the maximum activity in pH conditions ranging from 4.5–10.0. Several synthetic dyes were efficiently degraded by L01. Owing to its robustness, salt tolerance, and pH stability, L01 is a promising catalytic tool for potential industrial applications.

Dynamics of the role of LacMeta laccase in the complete degradation and detoxification of malachite green

Laccases highlight for xenobiotic bioremediation, as well as application in the fine chemical, textile, biofuel and food industries. In a previous work, we described the preliminary characterization of laccase LacMeta, a promising enzyme for the bioremediation of dyes, able to decolorization malachite green (MG), trypan blue, methylene blue. Here we demonstrate that LacMeta is indeed suitable for the complete degradation and detoxification of MG dye, not just for its discoloration, since some works show false positives due to the formation of colorless intermediates such as leucomalachite. The optimal pH and temperature parameters of LacMeta were 5.0 and 50 °C, respectively (MG as substrate). LacMeta was tolerant of up to 10 mmol L^- 1 EDTA (82%) and up to 5% (V/V) acetone (91%) and methanol (71%), while SDS promoted severe inhibition. For ions, a high tolerance to cobalt, zinc, manganese, and calcium (10 mmol L^- 1) was also observed (> 90%). Even under high-salinity conditions (1 mol L^- 1 NaCl), the residual bleaching activity of the dye remained at 61%. Furthermore, the bleaching product of MG did not inhibit the germination of sorghum and tomato seeds and was inert to the vegetative structures of the germinated seedlings. Additionally, this treatment effectively reduced the cytotoxic effect of the dye on microorganisms (Escherichia coli and Azospirillum brasilense), which can be explained by H-NMR spectral analysis results since LacMeta completely degraded the peak signals corresponding to the aromatic rings in the dye, demonstrating extreme efficiency in the bioremediation of the xenobiotic at high concentrations (50 mg L^- 1).

Laccase Production from Agrocybe pediades: Purification and Functional Characterization of a Consistent Laccase Isoenzyme in Liquid Culture

Laccases are valuable enzymes as an excellent ecological alternative for bioremediation issues because they can oxidize persistent xenobiotic compounds. The production and characterization of extracellular laccases from saprotrophic fungi from disturbed environments have been scarcely explored, even though this could diversify their functional characteristics and expand the conditions in which they carry out their catalysis. Agrocybe pediades, isolated from a disturbed forest, produces an extracellular laccase in liquid culture. The enzyme was purified, identified and characterized. Copper and hexachlorobenzene do not function as inducers for the laccase produced. Partial amino acid sequences were obtained by LC-MS/MS that share similarity with laccases from other fungi. Purified laccase is a monomer with a molecular mass between 55-60 kDa and had an optimum activity at pH 5.0 and the optimum temperature at 45 °C using 2,6-dimethoxyphenol (2,6-DMP) as substrate. The K_m and V_max also determined with 2,6-DMP were 100 μM and 285 μmol∙min^-1∙mg^-1, respectively, showing that the laccase of A. pediades has a higher affinity for this substrate than that of other Agaricales. These features could provide a potential catalyst for different toxic substrates and in the future laccase could be used in environmental recovery processes.

Characterisation of a laccase isolated from Trametes hirsuta and its application in the oligomerisation of phenolic compounds

Phenolic compounds are widely distributed in nature and industrial environment, and their detoxification or bioactive enhancement is of great value to environmental protection and industrial development. Laccases are multicopper oxidases that catalyse the oligo- or polymerisation of phenolic compounds. Identifying new laccase producers and investigating their application potential are of great importance. In this study, a white-rot fungus, Trametes hirsuta EZ1, with significantly high laccase productivity was isolated. The optimum conditions were studied for the maximum fermentation of extracellular laccase, which was achieved at 150 U/mL with a medium containing 10% strain EZ1, 7% maltodextrin, 1.5% peptone, and 0.5 mM Cu²⁺, and incubation at initial pH 6.0, 32 °C, and 180 rpm for nine days. Subsequently, a 70-kDa laccase was purified that showed activity over a wide range of temperature and pH, sensitivity to many metal ions and sodium dodecyl sulphate, and high tolerance to organic solvents. Purified laccase showed a significant unreported effect by catalysing catechol or ferulic acid into dimers, trimers, and tetramers or caffeic acid into dimers, trimers, tetramers, and pentamers. The oligomeric mixtures exhibited increased antioxidative capacity compared to that of each parent monomer, except for caffeic acid derivatives. Our study offers a novel strain source for laccase production and broadens its application in the enhancement of bioactive compounds.

A Novel Polyphenol Oxidoreductase OhLac from Ochrobactrum sp. J10 for Lignin Degradation

Identifying the enzymes involved in lignin degradation by bacteria is important in studying lignin valorization to produce renewable chemical products. In this paper, the catalytic oxidation of lignin by a novel multi-copper polyphenol oxidoreductase (OhLac) from the lignin degrader Ochrobactrum sp. J10 was explored. Following its expression, reconstitution, and purification, a recombinant enzyme OhLac was obtained. The OhLac enzyme was characterized kinetically against a range of substrates, including ABTS, guaiacol, and 2,6-DMP. Moreover, the effects of pH, temperature, and Cu²⁺ on OhLac activity and stability were determined. Gas chromatography-mass spectrometer (GC-MS) results indicated that the β-aryl ether lignin model compound guaiacylglycerol-β-guaiacyl ether (GGE) was oxidized by OhLac to generate guaiacol and vanillic acid. Molecular docking analysis of GGE and OhLac was then used to examine the significant amino residues and hydrogen bonding sites in the substrate–enzyme interaction. Altogether, we were able to investigate the mechanisms involved in lignin degradation. The breakdown of the lignocellulose materials wheat straw, corn stalk, and switchgrass by the recombinant OhLac was observed over 3 days, and the degradation results revealed that OhLac plays a key role in lignin degradation.

A Perspective Review on the Application of Polyacrylonitrile-Based Supports for Laccase Immobilization

The use of laccases applied in bioremediation processes has been increasingly studied, given the urgent need to overcome the environmental problems caused by emerging contaminants. It is known that immobilized enzymes have better operational stability under reaction conditions, allowing for greater applicability. However, given the lack of commercially available immobilized laccases, the search for immobilization materials and methods continues to gain effort. The use of polyacrylonitrile (PAN) to immobilize enzymes has been investigated since it is a low-cost material and can be modified and functionalized to well interact with the enzyme. This polymer can be used with different morphologies such as fibers, beads, and core-shell, presenting as an easily applicable alternative. This review presents the missing link between polymer and enzyme through an overview of PAN's current use as support for laccase immobilization and polymer functionalization methods, considering the importance of immobilized laccases in several industrial sectors.

Haploid Genome Analysis Reveals a Tandem Cluster of Four HSP20 Genes Involved in the High-Temperature Adaptation of Coriolopsis trogii

Coriolopsis trogii is a typical thermotolerant basidiomycete fungus, but its thermotolerance mechanisms are currently unknown. In this study, two monokaryons of C. trogii strain Ct001 were assembled: Ct001_29 had a genome assembly size of 38.85 Mb and encoded 13,113 genes, while Ct001_31 was 40.19 Mb in length and encoded 13,309 genes. Comparative intra- and interstrain genomic analysis revealed the rich genetic diversity of C. trogii, which included more than 315,194 single-nucleotide polymorphisms (SNPs), 30,387 insertion/deletions (indels), and 1,460 structural variations. Gene family analysis showed that the expanded families of C. trogii were functionally enriched in lignocellulose degradation activities. Furthermore, a total of 14 allelic pairs of heat shock protein 20 (HSP20) genes were identified in the C. trogii genome. The expression profile obtained from RNA sequencing (RNA-Seq) showed that four tandem-duplicated allelic pairs, HSP20.5 to HSP20.8, had more than 5-fold higher expression at 35°C than at 25°C. In particular, HSP20.5 and HSP20.8 were the most highly expressed HSP20 genes. Allelic expression bias was found for HSP20.5 and HSP20.8; the expression of Ct29HSP20.8 was at least 1.34-fold higher than that of Ct31HSP20.8, and that of Ct31HSP20.5 was at least 1.5-fold higher than that of Ct29HSP20.5. The unique structural and expression profiles of the HSP20 genes revealed by these haplotype-resolved genomes provide insight into the molecular mechanisms of high-temperature adaptation in C. trogii. IMPORTANCE Heat stress is one of the most frequently encountered environmental stresses for most mushroom-forming fungi. Currently available fungal genomes are mostly haploid because high heterozygosity hinders diploid genome assembly. Here, two haplotype genomes of C. trogii, a thermotolerant basidiomycete, were assembled separately. A conserved tandem cluster of four HSP20 genes showing allele-specific expression was found to be closely related to high-temperature adaptation in C. trogii. The obtained haploid genomes and their comparison offer a more thorough understanding of the genetic background of C. trogii. In addition, the responses of HSP20 genes at 35°C, which may contribute to the growth and survival of C. trogii at high temperatures, could inform the selection and breeding of elite strains in the future.

Efficient decolorization of recalcitrant dyes at neutral/alkaline pH by a new bacterial laccase-mediator system

Laccases and laccase-mediator systems (LMS) are versatile catalysts that can oxidize a broad range of substrates coupled to the sole reduction of dioxygen to water. They possess many biotechnological applications in paper, textile, and food industries, bioethanol production, organic synthesis, detection and degradation of pollutants, and biofuel cell development. In particular, bacterial laccases are getting relevance due to their activity in a wide range of pH and temperature and their robustness under harsh conditions. However, the enzyme and the redox mediator's availability and costs limit their large-scale commercial use. Here we demonstrate that β-(10-phenothiazyl)-propionic acid can be used as an efficient and low-cost redox mediator for decolorizing synthetic dyes by the recombinant laccase SilA from Streptomyces ipomoeae produced in E. coli. This new LMS can decolorize more than 80% indigo carmine and malachite green in 1 h at pH = 8.0 and 2 h in tap water (pH = 6.8). Furthermore, it decolorized more than 40% of anthraquinone dye remazol brilliant blue R and 80% of azo dye xylidine ponceau in 5 h at 50 °C, pH 8.0. It supported at least 3 decolorization cycles without losing activity, representing an attractive candidate for a cost-effective and environmentally friendly LMS functional at neutral to alkaline pH.

A Brief History of Colour, the Environmental Impact of Synthetic Dyes and Removal by Using Laccases

The history of colour is fascinating from a social and artistic viewpoint because it shows the way; use; and importance acquired. The use of colours date back to the Stone Age (the first news of cave paintings); colour has contributed to the social and symbolic development of civilizations. Colour has been associated with hierarchy; power and leadership in some of them. The advent of synthetic dyes has revolutionized the colour industry; and due to their low cost; their use has spread to different industrial sectors. Although the percentage of coloured wastewater discharged by the textile; food; pharmaceutical; cosmetic; and paper industries; among other productive areas; are unknown; the toxic effect and ecological implications of this discharged into water bodies are harmful. This review briefly shows the social and artistic history surrounding the discovery and use of natural and synthetic dyes. We summarise the environmental impact caused by the discharge of untreated or poorly treated coloured wastewater to water bodies; which has led to physical; chemical and biological treatments to reduce the colour units so as important physicochemical parameters. We also focus on laccase utility (EC 1.10.3.2), for discolouration enzymatic treatment of coloured wastewater, before its discharge into water bodies. Laccases (p-diphenol: oxidoreductase dioxide) are multicopper oxidoreductase enzymes widely distributed in plants, insects, bacteria, and fungi. Fungal laccases have employed for wastewater colour removal due to their high redox potential. This review includes an analysis of the stability of laccases, the factors that influence production at high scales to achieve discolouration of high volumes of contaminated wastewater, the biotechnological impact of laccases, and the degradation routes that some dyes may follow when using the laccase for colour removal.

Introducing a Thermo-Alkali-Stable, Metallic Ion-Tolerant Laccase Purified From White Rot Fungus Trametes hirsuta

This study introduces a valuable laccase, designated ThLacc-S, purified from white rot fungus Trametes hirsuta. ThLacc-S is a monomeric protein in nature with a molecular weight of 57.0 kDa and can efficiently metabolize endocrine disrupting chemicals. The enzyme was successfully purified to homogeneity via three consecutive steps consisting of salt precipitation and column chromatography, resulting in a 20.76-fold increase in purity and 46.79% yield, with specific activity of 22.111 U/mg protein. ThLacc-S was deciphered as a novel member of the laccase family and is a rare metalloenzyme that contains cysteine, serine, histidine, and tyrosine residues in its catalytic site, and follows Michaelis-Menten kinetic behavior with a K _m and a k _cat /K _m of 87.466 μM and 1.479 s^-1μM^-1, respectively. ThLacc-S exerted excellent thermo-alkali stability, since it was markedly active after a 2-h incubation at temperatures ranging from 20 to 70°C and retained more than 50% of its activity after incubation for 72 h in a broad pH range of 5.0-10.0. Enzymatic activities of ThLacc-S were enhanced and preserved when exposed to metallic ions, surfactants, and organic solvents, rendering this novel enzyme of interest as a green catalyst for versatile biotechnological and industrial applications that require these singularities of laccases, particularly biodegradation and bioremediation of environmental pollutants.

Methanol addition after glucose depletion improves rPOXA 1B production under the pGap in P. pastoris X33: breaking the habit

The purpose of this study was to demonstrate that methanol addition after glucose depletion has a positive effect on improving rPOXA 1B production under the control of pGap in P. pastoris. Four different culture media (A, B, C and D) were used to culture P. pastoris X33/pGapZαA-LaccPost-Stop (clone 1), containing a previously optimized POXA 1B synthetic gene coding for P. ostreatus laccase, which after glucose depletion was supplemented or not with methanol. Enzyme activity in culture media without methanol (A, B, C and D) was influenced by media components, presenting activity of 1254.30 ± 182.44, 1373.70 ± 182.44, 1343.50 ± 40.30 and 8771.61 ± 218.79 U L−1, respectively. In contrast, the same culture media (A, B, C and D) with methanol addition 24 h after glucose depletion attained activity of 4280.43 ± 148.82, 3339.02 ± 64.36, 3569.39 ± 68.38 and 14,868.06 ± 461.58 U L−1 at 192 h, respectively, representing an increase of approximately 3.9-, 2.4-, 3.3- and 1.6-fold compared with culture media without methanol. Methanol supplementation had a greater impact on volumetric enzyme activity in comparison with biomass production. We demonstrated what was theoretically and biochemically expected: recombinant protein production under pGap control by methanol supplementation after glucose depletion was successful, as a feasible laboratory production strategy of sequential carbon source addition, breaking the habit of utilizing pGap with glucose.

A new tool to sense pH changes at the neuromuscular junction synaptic cleft

Synaptic transmission triggers transient acidification of the synaptic cleft. Recently, it has been shown that pH affects the opening of postsynaptic channels and therefore the production of tools that allow to study these behaviors should result of paramount value. We fused α-bungarotoxin, a neurotoxin derived from the snake Bungarus multicinctus that binds irreversibly to the acetylcholine receptor extracellular domain, to the pH sensitive GFP Super Ecliptic pHluorin, and efficiently expressed it in Pichia pastoris. This sensor allows synaptic changes in pH to be measured without the need of incorporating transgenes into animal cells. Here, we show that incubation of the mouse levator auris muscle with a solution containing this recombinant protein is enough to fluorescently label the endplate post synaptic membrane. Furthermore, we could physiologically alter and measure post synaptic pH by evaluating changes in the fluorescent signal of pHluorin molecules bound to acetylcholine receptors. In fact, using this tool we were able to detect a drop in 0.01 to 0.05 pH units in the vicinity of the acetylcholine receptors following vesicle exocytosis triggered by nerve electrical stimulation. Further experiments will allow to learn the precise changes in pH during and after synaptic activation.

Kinetic characterization of purified laccase from Trametes hirsuta: a study on laccase catalyzed biotransformation of 1,4-dioxane

OBJECTIVE

Laccase is one of the best known biocatalysts which degrade wide varieties of complex molecules that are both non-cyclic and cyclic in structure. The study focused on enzyme kinetics of a purified laccase from Trametes hirsuta L. fungus and its application on biotransformation of a carcinogenic molecule 1,4-dioxane.

RESULTS

Laccase was purified from white-rot fungus T. hirsuta L. which showed specific activity of 978.34 U/mg after the purification fold of 54.08. The stable laccase activity (up to 16 h) is shown at 4-6 pH and 20-40 °C temperature range. The purified enzyme exhibited significant stability for 10 metal ions up to 10 mM concentration, except for Fe²⁺ and Hg²⁺. The Cu²⁺ ion induced laccase activity up to 142% higher than the control at 10 mM concentration. The laccase enzyme kinetic parameters K_m was 20 ± 5 µM and 400 ± 60 µM, whereas K_cat was 198.29 ± 0.18/s and 80.20 ± 1.59/s for 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and guaiacol respectively. The cyclic ether 1,4-dioxane (100 ppm) was completely degraded in presence of purified laccase within 2 h of incubation and it was confirmed by HPLC and GC analysis. The oxidation reaction was accelerated by 25, 22, 6 and 19% in presence of 1 mM syringaldehyde, vanillin, ABTS and guaiacol mediators respectively.

CONCLUSIONS

In this study, fungal laccase (a natural biocatalyst) based degradation of synthetic chemical 1,4-dioxane was reported for the first time. This method has added advantages over the multiple methods reported earlier being a natural remedy.

Degradation and detoxification of azo dyes with recombinant ligninolytic enzymes from Aspergillus sp. with secretory overexpression in Pichia pastoris

Ligninolytic enzymes, including laccase (Lac), manganese peroxidase (MnP) and lignin peroxidase (LiP), have attracted much attention in the degradation of contaminants. Genes of Lac (1827 bp), MnP (1134 bp) and LiP (1119 bp) were cloned from Aspergillus sp. TS-A, and the recombinant Lac (69 kDa), MnP (45 kDa) and LiP (35 kDa) were secretory expressed in Pichia pastoris GS115, with enzyme activities of 34, 135.12 and 103.13 U l-1, respectively. Dyes of different structures were treated via the recombinant ligninolytic enzymes under the optimal degradation conditions, and the result showed that the decolourization rate of Lac on Congo red (CR) in 5 s was 45.5%. Fourier-transform infrared spectroscopy, gas chromatography-mass spectrometry analysis and toxicity tests further proved that the ligninolytic enzymes could destroy the dyes, both those with one or more azo bonds, and the degradation products were non-toxic. Moreover, the combined ligninolytic enzymes could degrade CR more completely compared with the individual enzyme. Remarkably, besides azo dyes, ligninolytic enzymes could also degrade triphenylmethane and anthracene dyes. This suggests that ligninolytic enzymes from Aspergillus sp. TS-A have the potential for application in the treatment of contaminants.

Non-Hydrolyzable Plastics - An Interdisciplinary Look at Plastic Bio-Oxidation

Enzymatic plastic conversion has emerged recently as a potential adjunct and alternative to conventional plastic waste management technology. Publicity over progress in the enzymatic degradation of polyesters largely neglects that the majority of commercial plastics, including polyethylene, polypropylene, polystyrene and polyvinyl chloride, are still not biodegradable. Details about the mechanisms used by enzymes and an understanding of macromolecular factors influencing these have proved to be vital in developing biodegradation methods for polyesters. To expand the application of enzymatic degradation to other more recalcitrant plastics, extensive knowledge gaps need to be addressed. By drawing on interdisciplinary knowledge, we suggest that physicochemical influences also have a crucial impact on reactions in less well-studied types of plastic, and these need to be investigated in detail.

Comprehensive studies on optimization of ligno-hemicellulolytic enzymes by indigenous white rot hymenomycetes under solid-state cultivation using agro-industrial wastes

The disposal of oil palm biomass is a huge challenge in Malaysian oil palm plantations. The aim of this study was to develop efficient solid-state cultivated (SSC) ligno-hemicellulolytic bio-degrader formulations of indigenous white-rot hymenomycetes (Trametes lactinea FBW and Pycnoporus sanguineus FBR) utilizing oil palm empty fruit bunches (EFB), rubber wood sawdust (SD) and vermiculite (V) either alone or in combination as substrates. Based on significant laccase (849.40 U mg^-1 protein), xylanase (42.26 U g^-1 protein) and amylase (157.49 U g^-1 protein) production, SD+V (T5) and V (T3) were the optimum substrates for SSC of T. lactinea FBW. Whereas, utilizing EFB (T1) substrate for SSC of P. sanguineus FBR enhanced the production of MnP (42.51 U mg^-1 protein), LiP (103.20 U mg^-1 protein) and CMCase (34.39 U g^-1 protein), enzymes. Apparently, this is the first study reporting on the protein profiles by T. lactinea FBW, producing two isoforms of un-purified laccase (~55 and 70 kDa) and MnP (~40 and 60 kDa) and a CMCase band (~60 kDa) during SSC on SD+V (T5) substrate. Interestingly, this is also the first report to document a single isoform of un-purified laccase (~50 kDa), MnP (~45 kDa), CMCase (~60 kDa) and xylanase (~55 kDa) by P. sanguineus FBR during SSC on empty fruit bunches substrate. The computed Principal Component Analysis (PCA) Biplot analysis elucidated the relationship between the solid substrate compositions, the hymenomycete strain, ligno-hemicellulolytic enzyme profiles, and cultivation time. Therefore, it is suggested to use PCA as a tool for multivariate analysis method for comprehensive selection and optimization of ligno-hemicellulolytic enzyme cocktails by the indigenous white rot hymenomycetes. These non-toxic (acute oral toxicity) formulations are safe to be used in field applications to efficiently degrade oil palm trunks and root mass that had been felled, chipped or pulverized under zero burning waste management program. This study could also serve as an alternative method for efficient utilization of agro-industrial waste as substrates for the development of cost-effective bio-degraders formulations for agro-waste management.

A Thermo-Active Laccase Isoenzyme From Trametes trogii and Its Potential for Dye Decolorization at High Temperature

A thermo-activation and thermostable laccase isoenzyme (Lac 37 II) produced by Trametes trogii S0301 at 37°C was purified to apparent homogeneity by anionic exchange chromatography and sephadex G-75 chromatography, with 12.3% of yeiled and a specific activity of 343.1 U mg^-1. The molecular weight of the purified Lac 37 II was estimated to be approximately 56 kDa in 12% sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The optimal pH and temperature for the protein was 2.7 and 60°C, respectively. The purified Lac 37 II showed higher resistance to all tested metal ions and organic solvents except for Fe²⁺ and Cd²⁺ at 37°C and the activity of the purified Lac 37 was significantly enhanced by Cu²⁺ at 50 mM. The K _cat , K _m , and K _cat /K _m of Lac 37 II were 2.977 s^-1, 16.1 μM, and 184.9 s^-1 μM^-1, respecively, in the condition of pH 2.7 and 60°C using ABTS as a substrate. Peptide-mass fingerprinting analysis showed that the Lac 37 II matched to the gene-deduced sequences of lcc3 in T. trogii BAFC 463, other than Lcc1, Lcc 2, and Lcc 4. Compared with laccase prepared at 28°C, the onset of thermo-activation of Lac 37 II activity occurred at 30°C with an increase of 10%, and reached its maximum at the temperatures range of 40-60°C with an increase of about 40% of their original activity. Furthermore, Lac 37 II showed the efficient decolorization ability toward triphenylmethane dyes at 60°C, with decolorization rates of 100 and 99.1% for 25 mg L^-1 malachite and crystal violet in 5 h, respectively, when hydroxybenzotriazole (HBT) was used as a mediator. In conclusion, it is the first time to report a thermo-activation laccase from a thermophilic T. trogii strain, which has a better enzyme property and higher decolorization ability among fungal laccases, and it also has a further application prospective in the field of biotechnology.

Advances in thermostable laccase and its current application in lignin-first biorefinery: A review

As the most abundant aromatic polymers on the Earth, lignin has great potential to produce biofuels and aromatic chemicals due to their high carbon content and low oxygen content. Lignin-first biorefinery methods have attracted increasing attention recently for their high-value of aromatic chemicals, and high biofuels productivity from lignocellulosic wastes. Thermostable laccase has proven to be an excellent alternative catalyst in degrading lignin for its versatile catalytic abilities under industrial conditions and pollution-free by-products. Thermostable laccases can be found in native extreme environments or modified by biologically based technologies such as gene recombination expression and enzyme direct evolution. This review demonstrated thermostable laccases and their application in lignin degradation. Future research should focus more on the investigation of the reaction of thermostable laccases with lignin substrates.

The in vivo impact of MsLAC1, a Miscanthus laccase isoform, on lignification and lignin composition contrasts with its in vitro substrate preference

BACKGROUND

Understanding lignin biosynthesis and composition is of central importance for sustainable bioenergy and biomaterials production. Species of the genus Miscanthus have emerged as promising bioenergy crop due to their rapid growth and modest nutrient requirements. However, lignin polymerization in Miscanthus is poorly understood. It was previously shown that plant laccases are phenol oxidases that have multiple functions in plant, one of which is the polymerization of monolignols. Herein, we link a newly discovered Miscanthus laccase, MsLAC1, to cell wall lignification. Characterization of recombinant MsLAC1 and Arabidopsis transgenic plants expressing MsLAC1 were carried out to understand the function of MsLAC1 both in vitro and in vivo.

RESULTS

Using a comprehensive suite of molecular, biochemical and histochemical analyses, we show that MsLAC1 localizes to cell walls and identify Miscanthus transcription factors capable of regulating MsLAC1 expression. In addition, MsLAC1 complements the Arabidopsis lac4-2 lac17 mutant and recombinant MsLAC1 is able to oxidize monolignol in vitro. Transgenic Arabidopsis plants over-expressing MsLAC1 show higher G-lignin content, although recombinant MsLAC1 seemed to prefer sinapyl alcohol as substrate.

CONCLUSIONS

In summary, our results suggest that MsLAC1 is regulated by secondary cell wall MYB transcription factors and is involved in lignification of xylem fibers. This report identifies MsLAC1 as a promising breeding target in Miscanthus for biofuel and biomaterial applications.

Media improvement for 10 L bioreactor production of rPOXA 1B laccase by P. pastoris

In this work, we statistically improved culture media for rPOXA 1B laccase production, expressed in Pichia pastoris containing pGAPZαA-LaccPost-Stop construct and assayed at 10 L bioreactor production scale (6 L effective work volume). The concentrated enzyme was evaluated for temperature and pH stability and kinetic parameter, characterized by monitoring oxidation of different ABTS [2, 20-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] substrate concentrations. Plackett-Burman experimental design (PBED) implementation improved previous work results by 3.05-fold, obtaining a laccase activity of 1373.72 ± 0.37 U L^-1 at 168 h of culture in a 500 mL shake flask. In contrast, one factor experimental design (OFED) applied after PBED improved by threefold the previous study, additionally increasing the C/N ratio. Employing OFED media at 10 L bioreactor scale was capable of producing 3159.93 ± 498.90 U L^-1 at 192 h, representing a 2.4-fold increase. rPOXA 1B concentrate remained stable between 10 and 50 °C and retained over 70% residual enzymatic activity at 60 °C and 50% at 70 °C. Concerning pH stability, the enzyme was stable at pH 4.0 ± 0.2 with a residual activity greater than 90%. The lowest residual activity (60%) was obtained at pH 10.0 ± 0.2. Furthermore, the apparent kinetic parameters were V _max of 3.163 × 10^-2 mM min^-1 and K _m of 1.716 mM. Collectively, regarding enzyme stability our data provide possibilities for applications involving a wide range of pH and temperatures.

Laccases: structure, function, and potential application in water bioremediation

The global rise in urbanization and industrial activity has led to the production and incorporation of foreign contaminant molecules into ecosystems, distorting them and impacting human and animal health. Physical, chemical, and biological strategies have been adopted to eliminate these contaminants from water bodies under anthropogenic stress. Biotechnological processes involving microorganisms and enzymes have been used for this purpose; specifically, laccases, which are broad spectrum biocatalysts, have been used to degrade several compounds, such as those that can be found in the effluents from industries and hospitals. Laccases have shown high potential in the biotransformation of diverse pollutants using crude enzyme extracts or free enzymes. However, their application in bioremediation and water treatment at a large scale is limited by the complex composition and high salt concentration and pH values of contaminated media that affect protein stability, recovery and recycling. These issues are also associated with operational problems and the necessity of large-scale production of laccase. Hence, more knowledge on the molecular characteristics of water bodies is required to identify and develop new laccases that can be used under complex conditions and to develop novel strategies and processes to achieve their efficient application in treating contaminated water. Recently, stability, efficiency, separation and reuse issues have been overcome by the immobilization of enzymes and development of novel biocatalytic materials. This review provides recent information on laccases from different sources, their structures and biochemical properties, mechanisms of action, and application in the bioremediation and biotransformation of contaminant molecules in water. Moreover, we discuss a series of improvements that have been attempted for better organic solvent tolerance, thermo-tolerance, and operational stability of laccases, as per process requirements.

The roles of Pleurotus ostreatus HAUCC 162 laccase isoenzymes in decolorization of synthetic dyes and the transformation pathways

Fungal laccases have shown great potential in industrial and environmental applications. They are generally produced as laccase isoenzymes. Thus, to further study the properties of different laccase isoenzymes and their performance in bio-remediation is essential for a deep understanding of laccase function and application. In this study, three Pleurotus ostreatus HAUCC 162 laccase isoenzymes were heterologously expressed, and the effects of different inhibitors, metal ions, and organic solvents on the activity of recombinant laccases were evaluated. In the dye decolorization test, LACC6 showed the highest ability to remove Malachite green (MG), Remazol Brilliant Blue R (RBBR), Bromophenol blue (BB), and Methyl orange (MO) among the three recombinant laccases. Removal rates within 24 h were 91.5%, 84.9%, 79.1%, and 73.1% for MG (100 mg/L), RBBR (100 mg/L), BB (100 mg/L), and MO (100 mg/L), respectively. The MG and RBBR transformation pathways were proposed by using High Performance Liquid Chromatography-Mass Spectrometry (LC-MS) analysis. Based on the results of this work, the production of recombinant LACC6 or improving the portion of LACC6 in the crude extracellular laccase may advance synthetic dye removal.

Optimization of Laccase from Ganoderma lucidum Decolorizing Remazol Brilliant Blue R and Glac1 as Main Laccase-Contributing Gene

Many dyes and pigments are used in textile and printing industries, and their wastewater has been classed as a top source of pollution. Biodegradation of dyes by fungal laccase has great potential. In this work, the influence of reaction time, pH, temperature, dye concentration, metal ions, and mediators on laccase-catalyzed Remazol Brilliant Blue R dye (RBBR) decolorization were investigated in vitro using crude laccase from the white-rot fungus Ganoderma lucidum. The optimal decolorization percentage (50.3%) was achieved at 35 °C, pH 4.0, and 200 ppm RBBR in 30 min. The mediator effects from syringaldehyde, 1-hydroxybenzotriazole, and vanillin were compared, and 0.1 mM vanillin was found to obviously increase the decolorization percentage of RBBR to 98.7%. Laccase-mediated decolorization percentages significantly increased in the presence of 5 mM Na+ and Cu2+, and decolorization percentages reached 62.4% and 62.2%, respectively. Real-time fluorescence-quantitative PCR (RT-PCR) and protein mass spectrometry results showed that among the 15 laccase isoenzyme genes, Glac1 was the main laccase-contributing gene, contributing the most to the laccase enzyme activity and decolorization process. These results also indicate that under optimal conditions, G. lucidum laccases, especially Glac1, have a strong potential to remove RBBR from reactive dye effluent.

Heterologous expression of Stlac2, a laccase isozyme of Setosphearia turcica, and the ability of decolorization of malachite green

The active laccases of ascomycetous fungus Setosphaeria turcica were identified by Native-PAGE and ESI-MS/MS, and one of these isozymes Stlac2 was heterologous expressed to investigate the decolorization of malachite green. Setosphaeria turcica produced three active laccase isozymes: Stlac1, Stlac2, and Stlac6. Stlac2 was heterologously expressed in both eukaryotic and prokaryotic expression systems. The eukaryotic recombinant Stlac2 expressed in Pichia pastoris was inactive, and also showed a higher molecular weight than predicted because of glycosylation. The depression of laccase activity was attributable to the incorrect glycosylation at Asn97. Stlac2 expressed in Escherichia coli and the recombinant Stlac2 exhibited activity of 28.23 U/mg with 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as the substrate. The highest activity was observed at pH of 4.5 and the temperature of 60 °C. The activity of recombinant Stlac2 was inhibited by 10 mM Na⁺, Mg²⁺, Ca²⁺, Mn²⁺, and increased by 10 mM of Fe³⁺ with a relatively activity of 315% compared with no addition. Cu²⁺ did not affect enzyme activity. Recombinant Stlac2 was capable of decolorizing 67.08% of 20 mg/L malachite green in 15 min without any mediators. CONCLUSIONS: Generally, recombinant protein of fungal laccase Stlac2 was active without glycosylation and decolorize malachite green efficiently, which has potential industrial applications.

Two Manganese Peroxidases and a Laccase of Trametes polyzona KU-RNW027 with Novel Properties for Dye and Pharmaceutical Product Degradation in Redox Mediator-Free System

Two manganese peroxidases (MnPs), MnP1 and MnP2, and a laccase, Lac1, were purified from Trametes polyzona KU-RNW027. Both MnPs showed high stability in organic solvents which triggered their activities. Metal ions activated both MnPs at certain concentrations. The two MnPs and Lac1, played important roles in dye degradation and pharmaceutical products deactivation in a redox mediator-free system. They completely degraded Remazol brilliant blue (25 mg/L) in 10-30 min and showed high degradation activities to Remazol navy blue and Remazol brilliant yellow, while Lac1 could remove 75% of Remazol red. These three purified enzymes effectively deactivated tetracycline, doxycycline, amoxicillin, and ciprofloxacin. Optimal reaction conditions were 50 °C and pH 4.5. The two MnPs were activated by organic solvents and metal ions, indicating the efficacy of using T. polyzona KU-RNW027 for bioremediation of aromatic compounds in environments polluted with organic solvents and metal ions with no need for redox mediator supplements.

Molecular characterization and overexpression of mnp6 and vp3 from Pleurotus ostreatus revealed their involvement in biodegradation of cotton stalk lignin

Fungal secretory heme peroxidase (Class II POD) plays a significant role in biomass conversion due to its lignin-degrading activity. In this study, genome-wide identification and bioinformatics were performed to analyze P leurotus ostreatus peroxidases (PoPODs). A total of six manganese peroxidases (MnPs) and three versatile peroxidases (VPs) were obtained. Bioinformatics analysis and qRT-PCR showed that P. ostreatus mnp6 (Pomnp6) and P. ostreatus vp3 (Povp3) could be involved in lignin degradation. Both Pomnp6 and Povp3 transgenetic fungi showed significantly increased lignin degradation of cotton stalks. 1H-NMR revealed that Pomnp6 and Povp3 may preferentially degrade S-lignin in cotton stalks and mainly break β-O-4' bond linkages and hydroxyl. These results support the possible utility of Pomnp6 and Povp3 in natural straw resources and development of sustainable energy.

Production, Gene Cloning, and Overexpression of a Laccase in the Marine-Derived Yeast Aureobasidium melanogenum Strain 11-1 and Characterization of the Recombinant Laccase

Aureobasidium melanogenum strain 11-1 with a high laccase activity was isolated from a mangrove ecosystem. Under the optimal conditions, the 11-1 strain yielded the highest laccase activity up to 3120.0 ± 170 mU/ml (1.2 U/mg protein) within 5 days. A laccase gene (LAC1) of the yeast strain 11-1 contained two introns and encoded a protein with 570 amino acids and four conserved copper-binding domains typical of the fungal laccase. Expression of the LAC1 gene in the yeast strain 11-1 made a recombinant yeast strain produce the laccase activity of 6005 ± 140 mU/ml. The molecular weight of the recombinant laccase after removing the sugar was about 62.5 kDa. The optimal temperature and pH of the recombinant laccase were 40 °C and 3.2, respectively, and it was stable at a temperature less than 25 °C. The laccase was inhibited in the presence of sodium dodecyl sulfate (SDS), ethylenediaminetetraacetic acid (EDTA), phenylmethanesulfonyl fluoride (PMSF), and DL-dithiothreitol (DTT). The K_m and V_max values of the laccase for 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) was 6.3 × 10^-2 mM and 177.4 M/min, respectively. Many synthetic dyes were greatly decolored by the laccase.

Purification and characterization of a fungal laccase from the ascomycete Thielavia sp. and its role in the decolorization of a recalcitrant dye

A laccase-producing ascomycete was isolated from arid soil in Tunisia. This fungus was identified as Thielavia sp. using the phylogenetic analysis of rDNA internal transcribed spacers. The extracellular laccase produced by the fungus was purified to electrophoretic homogeneity, showing a molecular mass around 70 kDa. The enzyme had an optimum pH of 5.0 and 6.0 for ABTS and 2,6‑DMP, respectively and it showed remarkable high thermal stability, showing its optimal temperature at 70 °C (against 2,6‑DMP). It presented slight inhibiting effect by EDTA, SDS and l‑cyst although this effect was more marked by sodium azide (0.1 mM). On the other hand, it showed tolerance to up to 300 mM NaCl, retaining around 50% of its activity at 900 mM. Among the metal ions tested on TaLac1, Mn²⁺ showed an activating effect. Their kinetic parameters K_m and k_cat were 23.7 μM and 4.14 s^-1 for ABTS, and 24.3 μM and 3.46 s^-1 towards 2,6‑DMP. The purified enzyme displayed greater efficiency in Remazol Brilliant Blue R decolorization (90%) in absence of redox mediator, an important property for biotechnological applications.

Expression and characterization of novel laccase gene from Pandoraea sp. ISTKB and its application

In the present study, a non-blue laccase gene from previously reported lignin degrading bacterium, Pandoraea sp. ISTKB, was isolated, cloned and expressed in E. coli. Bioinformatics analysis of sequence discovered twin-arginine translocation signal sequence, copper binding motifs and presence of more random coil compare to helices and sheets in structure. The enzyme was found to be active on wide pH range and the pH optima was observed at pH 4 and 8 on substrate 2,2'-Azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) and 2,6-Dimethoxyphenol respectively. This is a thermophilic enzyme with maximum activity around 50-70 °C. The enzyme was further characterized by spectroscopy, reaction kinetics and effect of metal ions and inhibitors were studied. Compared to laccase alone; the treatment of dyes with laccase plus mediator resulted in enhanced decolorization of crystal violet, methylene blue, azure B, carmine and Congo red but the effect of mediator was not observed on trypan blue. Laccase treatment triggered polymerization on vanillic acid (VA) and kraft lignin (KL). Laccase plus mediator treatment reversed the polymerization and resulted in transformation or degradation of VA and KL. This thermophilic and alkalophilic non-blue laccase from Pandoraea sp. ISTKB is promising with prospective biotechnological application.

Isolation, identification of a laccase-producing fungal strain and enzymatic properties of the laccase

A new type of thermostable laccase was isolated from Paraphoma sp. GZS18, and its partial enzymatic properties were determined. A strain GZS18 of laccase with high yield was screened from forest soil and identified as Paraphoma sp. GZS18 through morphological characteristics and ITS sequence analysis. The laccase of Paraphoma sp. GZS18 (Lac-P) was obtained through cation-anion exchange chromatography, gel filtration chromatography, and other purification processes. The testing result shows that Lac-P is a single protein of 75 kDa, and the 11 amino acid sequences in the N-terminal are AX^aVSVASREMT (X^a was the non-standard protein). The optimum temperature and optimum pH of lac-P activity are substrate-independent. The temperature is in the range of 50-70 °C, and pH has high catalytic efficiency in the acidic range. Lac-P has good stability in the temperature and pH. The half time at 70-60 °C is 1.5 and 4 h, respectively. At pH 6-9 and room temperature, there is more than 80% activity 24 h later. Lac-P is tolerant of most metal ions and low concentrations of inhibitors but is inhibited by Hg²⁺, Fe²⁺ and NaN₃. The laccase from Paraphoma sp. GZS18 at high temperature and pH 6-9, with strong stability, has better industrial application characteristics.

Production of Laccase by a New Myrothecium verrucaria MD-R-16 Isolated from Pigeon Pea [Cajanus cajan (L.) Millsp.] and its Application on Dye Decolorization

The present study was conducted to screen a laccase-producing fungal endophyte, optimize fermentation conditions, and evaluate the decolorization ability of the laccase. A new fungal endophyte capable of laccase-producing was firstly isolated from pigeon pea and identified as Myrothecium verrucaria based on a ITS-rRNA sequences analysis. Meanwhile, various fermentation parameters on the laccase production were optimized via response surface methodology (RSM). The optimal fermentation conditions were a fermentation time of five days, temperature 30 °C and pH 6.22. Laccase activity reached 16.52 ± 0.18 U/mL under the above conditions. Furthermore, the laccase showed effective decolorization capability toward synthetic dyes (Congo red, Methyl orange, Methyl red, and Crystal violet) in the presence of the redox mediator ABTS, with more than 70% of dyes decolorizing after 24 h of incubation. Additionally, the activity of laccase was relatively stable with pH (4.5-6.5) and a temperature range of 35-55 °C. Therefore, the high laccase production of the strain and the new fungal laccase could provide a promising alterative approach for industrial and environmental applications.